Summary:
Ref T11326. Normally, events occur at a specific epoch, independent of the viewer. For example, if we're having a meeting in 35 hours, every user who looks at the event will see that it starts 35 hours from now.
But when an event is "All Day", the start time and end time depend on the //viewer//. A day like "Christmas" does not start at the same time for everyone: it starts sooner if you're in a more-eastern timezone. Baiscally, an event on "July 15th" starts whenever "July 15th" starts for whoever is looking at it.
Previously, we stored these events by using the western-most and eastern-most timezones as the start and end times (the earliest possible start and latest possible end).
This worked OK, but we get into a bunch of trouble with EditEngine, mostly because each field can be updated individually now. We can't easily tell if an event is all-day or not when reading or updating the start time and end time, and making that easier would introduce a huge amount of complexity.
Instead, when we update the start or end time, we write //two// times:
- The epoch timestamp of the time the user entered, which is the start time we will use if the event is a normal event.
- The epoch timestamp of 12:00 AM in UTC on the same date as the //local// date the user entered. This is pretty much like just storing the date the user actually typed. This is what w'ell use if the event is an all-day event.
Then, no matter whether the event is later made all-day or not, we have all the information we need to display it correctly.
Test Plan:
- Created and edited all-day events.
- Migrated existing all-day events, which appeared to survive without problems. (Note that events all-day which were created or edited in the last couple of days `master` won't survive this mutation correctly and will need to be fixed.)
- Created and edited normal, recurring, and recurring all-day events.
- Swapped back to `stable`, created an event, specifically migrated it forward, made sure it survived with times intact.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11326
Differential Revision: https://secure.phabricator.com/D16305
Summary: Ref T10909. Ref T9224. We label this field "Host" in the UI; make the storage format consistent.
Test Plan:
- Viewed month view, day view, detail view of an event.
- Created a new event, saw myself as the host.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9224, T10909
Differential Revision: https://secure.phabricator.com/D16291
Summary:
Ref T9275. When you create a recurring event which recurs forever, we want to avoid writing an infinite number of rows to the database.
Currently, we write a row to the database right before you edit the event. Until then, we refer to it as `E123/999` or whatever ("instance 999 of event 123").
This creates a big mess with trying to make recurring events work with EditEngine, Subscriptions, Projects, Flags, Tokens, etc -- all of this stuff assumes that whatever you're working with has a PHID.
I poked at letting this stuff work without a PHID a little bit, but that looked like a gigantic mess.
Instead, generate an event "stub" a little sooner (when you look at the event detail page). This is basically just an ID/PHID to refer to the instance.
Then, when you edit the stub, "materialize" it into a real event.
This still has some issues, but I think it's more promising than the other approach was.
Also:
- Removes dead user profile calendar controller.
- Replaces comments with EditEngine comments.
Test Plan:
- Commented on a recurring event.
- Awarded tokens to a recurring event.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9275
Differential Revision: https://secure.phabricator.com/D16248
Summary:
Fixes T11307. Fixes T8124. Currently, builtin files are tracked by using a special transform with an invalid source ID.
Just use a dedicated column instead. The transform thing is too clever/weird/hacky and exposes us to issues with the "file" and "transform" tables getting out of sync (possibly the issue in T11307?) and with race conditions.
Test Plan:
- Loaded profile "edit picture" page, saw builtins.
- Deleted all builtin files, put 3 second sleep in the storage engine write, loaded profile page in two windows.
- Before patch: one of them failed with a race.
- After patch: both of them loaded.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8124, T11307
Differential Revision: https://secure.phabricator.com/D16271
Summary: Ref T9360. These weren't getting set properly, also make them nullable since they're optional.
Test Plan: run upgrade, make a new blog with and without a parent domain. Edit a current blog.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9360
Differential Revision: https://secure.phabricator.com/D16242
Summary:
Ref T9838.
Add a Properties field to Revision, and update a `wasAcceptedBeforeClose` when closing a revision.
Test Plan:
A quick run through the obvious steps (Close with commit/manually, with or w/o accept) and calling `differential.query` shows the `wasAcceptedBeforeClose` property was setup correctly.
Pushing closed + accepted passes the relevant herald, which was my immediate issue; Pushing un-accepted is blocked.
Test the "commit" rule (Different from "pre-commit") by hacking the DB and running the "has accepted revision" rule in a test-console.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Maniphest Tasks: T9838
Differential Revision: https://secure.phabricator.com/D15085
Summary: We haven't refreshed this in a while.
Test Plan: Saw unit test times drop about 1.5 seconds locally.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D16176
Summary: Ref T9897. This moves "Domain" to "DomainFullURI" to allow setting of https or for some reason, a port. I guess.
Test Plan: Try to break by setting a path, or fake protocol. Set to http, or https, see correct redirects. Verify domain still gets written.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9897
Differential Revision: https://secure.phabricator.com/D16173
Summary: Ref T9897. Adds a Parent Site and Parent Domain field to allow external sites to link back to parent.
Test Plan: Set up ```local.blog.phacility.com```, set parent site to "Phacility" and parent domain to "local.www.phacility.com". Get new crumbs at Blog and Post levels.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9897
Differential Revision: https://secure.phabricator.com/D16150
Summary: Adds a new header layout for Phame Blog. Subtitles now also.
Test Plan:
With Image, With Subtitle, Without Image, Without Subtitle. Mobile, Tablet, Desktop.
{F1691506}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16147
Summary:
Ref T11153. If you have a build plan like this:
- Lease machine A.
- Lease machine B.
- Run client-tests on machine A.
- Run server-tests on machine B.
...and we get machine A quickly, then finish the tests, we currently do not release machine A until the whole plan finishes.
In the best case, this wastes resources (something else could be using that machine for a while).
In a worse case, this wastes a lot of resources (if machine B is slow to acquire, or the server tests are much slower than the client tests, machine A will get tied up for a really long time).
In the absolute worst case, this might deadlock things.
Instead, release artifacts as soon as no waiting/running steps take them as inputs. In this case, we'd release machine A as soon as we finished running the client tests.
In the case where machines A and B are resources of the same type, this should prevent deadlocks. In all cases, this should improve build throughput at least somewhat.
Test Plan:
I wrote this build plan which runs a "fast" step (10 seconds) and a "slow" step (120 seconds):
{F1691190}
Before the patch, running this build plan held the lease on the "fast" machine for the full 120 seconds, then released both leases at the same time at the very end.
After this patch, I ran this plan and observed the "fast" lease get released after 10 seconds, while the "slow" lease was held for the full 120.
(Also added some `var_dump()` into things to sanity check the logic; it appeared correct.)
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11153
Differential Revision: https://secure.phabricator.com/D16145
Summary: This is the backend half of uploading an image as a header for Phame Blogs. Allows you to upload image, or delete it. Ref T10901
Test Plan:
Go to Manage Blog, visit Edit Header Image, Upload snarky file. See snarky file on Manage page. Edit Header Image, click delete, save, see file goes away.
{F1690966}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10901
Differential Revision: https://secure.phabricator.com/D16140
Summary:
Ref T9028. This allows us to detect when commits are unreachable:
- When a ref (tag, branch, etc) is moved or deleted, store the old thing it pointed at in a list.
- After discovery, go through the list and check if all the stuff on it is still reachable.
- If something isn't, try to follow its ancestors back until we find something that is reachable.
- Then, mark everything we found as unreachable.
- Finally, rebuild the repository summary table to correct the commit count.
Test Plan:
- Deleted a ref, ran `pull` + `refs`, saw oldref in database.
- Ran `discover`, saw it process the oldref, mark the unreachable commit, and update the summary table.
- Visited commit page, saw it properly marked.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9028
Differential Revision: https://secure.phabricator.com/D16133
Summary:
Ref T9789. `Transaction` and `Editor` classes are the last major pieces of infrastructure that haven't been fully modularized.
Some of the specific issues are:
- `Editor` classes rely on a bunch of `instanceof` stuff in the base class to pick up transaction types like "subscribe", "projects", etc. Instead, applications should be adding these, and third-party applications should be able to add them.
- Code is spread across `Transaction` and `Editor` classes somewhat oddly. For example, generating old/new values would probably make more sense at the `Transaction` level, but it currently exists at the `Editor` level.
- Both types of classes have a lot of functions based on `switch()` statements, which require a ton of boilerplate and are just generally kind of hard to work with.
This creates classes for each type of transaction, and moves almost all of the logic to them. These classes are simpler and more focused than the old stuff was, and can organize related code better.
This starts inching toward defining `CoreTransactions` for features shared across applications. It only defines the "Create" transaction so far, but at some point I plan to move all the other shared transactions to Core and let them control which objects they're available for.
Test Plan:
- Created pastes with web UI and API.
- Edited all paste properites.
- Archived/activated.
- Verified files got reasonable names.
- Reviewed timeline and feed.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9789
Differential Revision: https://secure.phabricator.com/D16111
Summary:
Ref T4103. This just adds a single global default setting group, not full profiles.
Primarily, I'm not sure how administrators are supposed to set profiles for users, since most ways user accounts get created don't really support setting roles.. When we figure that out, it should be reasonably easy to extend this. There also isn't much of a need for this now, since pretty much everyone just wants to turn off mail.
Test Plan:
- Edited personal settings.
- Edited global settings.
- Edited a bot's settings.
- Tried to edit some other user's settings.
- Saw defaults change appropriately as I edited global and personal settings.
{F1677266}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16048
Summary:
Ref T4103. Ref T10078. This moves profile image caches to new usercache infrastructure.
These dirty automatically based on configuration and User properties, so add some stuff to make that happen.
This reduces the number of queries issued on every page by 1.
Test Plan: Browsed around, changed profile image, viewed as self, viewed as another user, verified no more query to pull this information on every page
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103, T10078
Differential Revision: https://secure.phabricator.com/D16040
Summary:
Ref T4103. This isn't completely perfect but should let us move forward without also expanding scope into "too much mail".
I split the existing "Mail Preferences" into two panels: a "Mail Delivery" panel for the EditEngine settings, and a "2000000 dropdowns" panel for the two million dropdowns. This one retains the old code more or less unmodified.
Test Plan:
- Ran unit tests, which cover most of this stuff.
- Grepped for all removed constants.
- Ran migrations, inspected database results.
- Changed settings in both modified panels.
- This covers a lot of ground, but anything I missed will hopefully be fairly obvious.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16038
Summary:
Ref T4103. These settings long-predate proper settings and are based on hard-coded user properties. Turn them into real settings.
(I didn't try to migrate the value since they're trivial to restore and only useful to developers.)
Test Plan:
- Toggled console on/off.
- Swapped tabs.
- Reloaded page, everything stayed sticky.
Reviewers: chad
Reviewed By: chad
Subscribers: eadler
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16029
Summary:
Ref T4103. These are currently stored on the user, for historic/performance reasons.
Since I want administrators to be able to set defaults for translations and timezones at a minimum and there's no longer a meaningful performance penalty for moving them off the user record, turn them into real preferences and then nuke the columns.
Test Plan:
- Set settings to unusual values.
- Ran migrations.
- Verified my unusual settings survived.
- Created a new user.
- Edited all settings with old and new UIs.
- Reconciled client/server timezone disagreement.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16005
Summary:
Ref T4103. This doesn't get everything, but takes care of most of the easy stuff.
The tricky-ish bit here is that I need to move timezones, pronouns and translations to proper settings. I expect to pursue that next.
Test Plan:
- Grepped for `loadPreferences` to identify callsites.
- Changed start-of-week setting, loaded Calendar, saw correct start.
- Visited welcome page, read "Adjust Settings" point.
- Loaded Conpherence -- I changed behavior here slightly (switching threads drops the title glyph) but it wasn't consistent to start with and this seems like a good thing to push to the next version of Conpherence.
- Enabled Filetree, toggled in Differential.
- Disabled Filetree, no longer visible in Differential.
- Changed "Unified Diffs" preference to "Small Screens" vs "Always".
- Toggled filetree in Diffusion.
- Edited a task, saw sensible projects in policy dropdown.
- Viewed user profile, uncollapsed/collapsed side nav, reloaded page, sticky'd.
- Toggled "monospaced textareas", used a comment box, got appropriate fonts.
- Toggled durable column.
- Disabled title glyphs.
- Changed monospaced font to 18px/36px impact.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16004
Summary:
Ref T4103. Currently, we issue a `SELECT * FROM user_preferences ... WHERE userPHID = ...` on every page to load the viewer's settings.
There are several other questionable data accesses on every page too, most of which could benefit from improved caching strategies (see T4103#178122).
This query will soon get more expensive, since it may need to load several objects (e.g., the user's settings and their "role profile" settings). Although we could put that data on the User and do both in one query, it's nicer to put it on the Preferences object ("This inherits from profile X") which means we need to do several queries.
Rather than paying a greater price, we can cheat this stuff into the existing query where we load the user's session by providing a user cache table and doing some JOIN magic. This lets us issue one query and try to get cache hits on a bunch of caches cheaply (well, we'll be in trouble at the MySQL JOIN limit of 61 tables, but have some headroom).
For now, just get it working:
- Add the table.
- Try to get user settings "for free" when we load the session.
- If we miss, fill user settings into the cache on-demand.
- We only use this in one place (DarkConsole) for now. I'll use it more widely in the next diff.
Test Plan:
- Loaded page as logged-in user.
- Loaded page as logged-out user.
- Examined session query to see cache joins.
- Changed settings, saw database cache fill.
- Toggled DarkConsole on and off.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16001
Summary:
Ref T4103. This give preferences a PHID, policy/transaction interfaces, a transaction table, and a Query class.
This doesn't actually change how they're edited, yet.
Test Plan:
- Ran migrations.
- Inspected database for date created, date modified, PHIDs.
- Changed some of my preferences.
- Deleted a user's preferences, verified they reset properly.
- Set some preferences as a new user, got a new row.
- Destroyed a user, verified their preferences were destroyed.
- Sent Conpherence messages.
- Send mail.
- Tried to edit another user's settings.
- Tried to edit a bot's settings as a non-admin.
- Edited a bot's settings as an admin (technically, none of the editable settings are actually stored in the settings table, currently).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D15991
Summary:
Ref T10917. Converts web UI edits to transactions.
This is about 95% "the right way", and then I cheated on the last 5% instead of building a real EditEngine. We don't need it for anything else right now and some of the dialog workflows here are a little weird so I'm just planning to skip it for the moment unless it ends up being easier to do after the next phase (mail notifications) or something like that.
Test Plan: {F1652160}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10917
Differential Revision: https://secure.phabricator.com/D15947
Summary:
Ref T10917. Currently, when you delete an SSH key, we really truly delete it forever.
This isn't very consistent with other applications, but we built this stuff a long time ago before we were as rigorous about retaining data and making it auditable.
In partiular, destroying data isn't good for auditing after security issues, since it means we can't show you logs of any changes an attacker might have made to your keys.
To prepare to improve this, stop destoying data. This will allow later changes to become transaction-oriented and show normal transaction logs.
The tricky part here is that we have a `UNIQUE KEY` on the public key part of the key.
Instead, I changed this to `UNIQUE (key, isActive)`, where `isActive` is a nullable boolean column. This works because MySQL does not enforce "unique" if part of the key is `NULL`.
So you can't have two rows with `("A", 1)`, but you can have as many rows as you want with `("A", null)`. This lets us keep the "each key may only be active for one user/object" rule without requiring us to delete any data.
Test Plan:
- Ran schema changes.
- Viewed public keys.
- Tried to add a duplicate key, got rejected (already associated with another object).
- Deleted SSH key.
- Verified that the key was no longer actually deleted from the database, just marked inactive (in future changes, I'll update the UI to be more clear about this).
- Uploaded a new copy of the same public key, worked fine (no duplicate key rejection).
- Tried to upload yet another copy, got rejected.
- Generated a new keypair.
- Tried to upload a duplicate to an Almanac device, got rejected.
- Generated a new pair for a device.
- Trusted a device key.
- Untrusted a device key.
- "Deleted" a device key.
- Tried to trust a deleted device key, got "inactive" message.
- Ran `bin/ssh-auth`, got good output with unique keys.
- Ran `cat ~/.ssh/id_rsa.pub | ./bin/ssh-auth-key`, got good output with one key.
- Used `auth.querypublickeys` Conduit method to query keys, got good active keys.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10917
Differential Revision: https://secure.phabricator.com/D15943
Summary: Ref T10939. This adds UI, transactions, etc, to adjust dominion rules.
Test Plan:
- Read documentation.
- Changed dominion rules.
- Created packages on `/` ("A") and `/x` ("B") with "Auto Review: Review".
- Touched `/x`.
- Verified that A and B were added with strong dominion.
- Verified that only B was added when A was set to weak dominion.
- Viewed file in Diffusion, saw correct ownership with strong/weak dominion rules.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10939
Differential Revision: https://secure.phabricator.com/D15936
Summary: Fixes T10975. The "scramble attached file permissions when an object is saved" code is misfiring here too. See T10778 + D15803 for prior work.
Test Plan:
- Ran `bin/storage upgrade -f`.
- Edited the view policy of an OAuth server (prepatch: fatal; postpatch: worked great).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10975
Differential Revision: https://secure.phabricator.com/D15938
Summary:
Ref T10939. Ref T8887. This moves toward letting packages automatically become reviewers or blocking reviewers of owned code.
This change adds an "Auto Review" option to packages. Because adding reviewers/blocking reviewers is a little tricky, it doesn't actually have these options yet -- just a "subscribe" option. I'll do the reviewer work in the next update.
Test Plan:
Created a revision in a package with "Auto Review: Subscribe to Changes". The package got subscribed.
{F1311677}
{F1311678}
{F1311679}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8887, T10939
Differential Revision: https://secure.phabricator.com/D15915
Summary:
Ref T10923. When regenerating the URI index for a repository, index every URI.
- Also, make the index slightly stricter (domain + path instead of just path). Excluding the domain made more sense when we were generating only first-party URIs.
- Make the index smarter about `/diffusion/123/` URIs.
- Show normalized URIs in `diffusion.repository.search` results.
Test Plan:
- Ran migration.
- Verified sensible-looking results in database.
- Searched for a repository URI by first-party clone URI.
- Searched for a repository URI by mirror URI.
- Used `diffusion.repository.search` to get information about repository URIs.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10923
Differential Revision: https://secure.phabricator.com/D15876
Summary:
Ref T10748. This needs more extensive testing and is sure to have some rough edges, but seems to basically work so far.
Throwing this up so I can work through it more deliberately and make notes.
Test Plan:
- Ran migration.
- Used `bin/repository list` to list existing repositories.
- Used `bin/repository update <repository>` to update various repositories.
- Updated a migrated, hosted Git repository.
- Updated a migrated, observed Git repository.
- Converted an observed repository into a hosted repository by toggling the I/O mode of the URI.
- Conveted a hosted repository into an observed repository by toggling it back.
- Created and activated a new empty hosted Git repository.
- Created and activated an observed Git repository.
- Updated a mirrored repository.
- Cloned and pushed over HTTP.
- Tried to HTTP push a read-only repository.
- Cloned and pushed over SSH.
- Tried to SSH push a read-only repository.
- Updated several Mercurial repositories.
- Updated several Subversion repositories.
- Created and edited repositories via the API.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15842
Summary:
Ref T10748. This migrates and swaps mirroring to `PhabricatorRepositoryURI`, obsoleting `PhabricatorRepositoryMirror`.
This prevents you from editing, adding or disabling mirrors unless you know a secret URI (until the UI cuts over fully), but existing mirroring is not affected.
Test Plan:
- Added a mirroring URI to an old repository.
- Verified it worked with `bin/repository mirror`.
- Migrated forward.
- Verified it still worked with `bin/repository mirror`.
- Wow, mirroring: https://github.com/epriestley/locktopia-mirror
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15841
Summary:
Ref T4039. Long ago these were more freely editable and there were some security concerns around creating a repository, then setting its local path to point somewhere it shouldn't.
Local paths are no longer editable so there's no real reason we need to provide a uniqueness guarantee anymore, but you could still make a mistake with `bin/repository move-paths` by accident, and it's a little cleaner to pull them out into their own column with a key.
(We still don't -- and, largely can't -- guarantee that two paths aren't //equivalent// since one might be symlinked to the other, or symlinked only on some hosts, or whatever, but the primary value here is as a sanity check that you aren't goofing things up and pointing a bunch of repositories at the same working copy by mistake.)
Test Plan:
- Ran migrations.
- Grepped for `local-path`.
- Listed and moved paths with `bin/repository`.
- Created a new repository, verified its local path populated correctly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4039
Differential Revision: https://secure.phabricator.com/D15837
Summary:
Ref T10748. Ref T10366. This adds a new EditEngine, EditController, Editor, Query, and Transaction for RepositoryURIs.
None of these really do anything helpful yet, and these URIs are still unused in the actual application.
Test Plan: {F1249794}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10366, T10748
Differential Revision: https://secure.phabricator.com/D15815
Summary:
Fixes T10778. This is a result of T10262: when we save a form configuration and adjust the policy, we try to scramble attached file secrets.
There aren't going to be any attached files, but there's also no edge table, so we fail.
We could skip this code, but we'll likely need an edge table here sooner or later so it's probably simpler in the long run to just add an empty one.
Test Plan:
- Ran `bin/storage upgrade`, got a clean bill of health.
- Saved a form configuration after making a policy edit, no more `edge` exception.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10778
Differential Revision: https://secure.phabricator.com/D15803
Summary:
Ref T10860. This allows us to recover if the connection to the database is lost during a push.
If we lose the connection to the master database during a push, we would previously freeze the repository. This is very safe, but not very operator-friendly since you have to go manually unfreeze it.
We don't need to be quite this aggressive about freezing things. The repository state is still consistent after we've "upgraded" the lock by setting `isWriting = 1`, so we're actually fine even if we lost the global lock.
Instead of just freezing the repository immediately, sit there in a loop waiting for the master to come back up for a few minutes. If it recovers, we can release the lock and everything will be OK again.
Basically, the changes are:
- If we can't release the lock at first, sit in a loop trying really hard to release it for a while.
- Add a unique lock identifier so we can be certain we're only releasing //our// lock no matter what else is going on.
- Do the version reads on the same connection holding the lock, so we can be sure we haven't lost the lock before we do that read.
Test Plan:
- Added a `sleep(10)` after accepting the write but before releasing the lock so I could run `mysqld stop` and force this issue to occur.
- Pushed like this:
```
$ echo D >> record && git commit -am D && git push
[master 707ecc3] D
1 file changed, 1 insertion(+)
# Push received by "local001.phacility.net", forwarding to cluster host.
# Waiting up to 120 second(s) for a cluster write lock...
# Acquired write lock immediately.
# Waiting up to 120 second(s) for a cluster read lock on "local001.phacility.net"...
# Acquired read lock immediately.
# Device "local001.phacility.net" is already a cluster leader and does not need to be synchronized.
# Ready to receive on cluster host "local001.phacility.net".
Counting objects: 3, done.
Delta compression using up to 8 threads.
Compressing objects: 100% (2/2), done.
Writing objects: 100% (3/3), 254 bytes | 0 bytes/s, done.
Total 3 (delta 1), reused 0 (delta 0)
BEGIN SLEEP
```
- Here, I stopped `mysqld` from the CLI in another terminal window.
```
END SLEEP
# CRITICAL. Failed to release cluster write lock!
# The connection to the master database was lost while receiving the write.
# This process will spend 300 more second(s) attempting to recover, then give up.
```
- Here, I started `mysqld` again.
```
# RECOVERED. Link to master database was restored.
# Released cluster write lock.
To ssh://local@localvault.phacility.com/diffusion/26/locktopia.git
2cbf87c..707ecc3 master -> master
```
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10860
Differential Revision: https://secure.phabricator.com/D15792
Summary: Ref T4292. When we write a push log, also log which node received the request.
Test Plan: {F1230467}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15759
Summary: Ref T4292. This will let the UI and future `bin/repository` tools give administrators more tools to understand problems when reporting or resolving them.
Test Plan:
- Pushed fully clean repository.
- Pushed previously-pushed repository.
- Forced write to abort, inspected useful information in the database.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15748
Summary:
Fixes T10830.
- The return code from `storage adjust` did not propagate correct.
- There was one column issue which I missed the first time around because I had a bunch of unrelated stuff locally.
Test Plan:
- Ran `bin/storage upgrade -f` with failures, used `echo $?` to make sure it exited nonzero.
- Got fully clean `bin/storage adjust` by dropping all my extra local tables.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10830
Differential Revision: https://secure.phabricator.com/D15746
Summary:
Fixes T10830. Ref T10366. I wasn't writing to this table yet so I didn't build it, but the fact that `bin/storage adjust` would complain slipped my mind.
- Add the table.
- Make the tests run `adjust`. This is a little slow (a few extra seconds) but we could eventually move some steps like this to run server-side only.
Test Plan: Ran `bin/storage upgrade -f`, got a clean `adjust`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10366, T10830
Differential Revision: https://secure.phabricator.com/D15744
Summary:
Ref T4292. This mostly implements the locking/versioning logic for multi-master repositories. It is only active on Git SSH pathways, and doesn't actually do anything useful yet: it just does bookkeeping so far.
When we read (e.g., `git fetch`) the logic goes like this:
- Get the read lock (unique to device + repository).
- Read all the versions of the repository on every other device.
- If any node has a newer version:
- Fetch the newer version.
- Increment our version to be the same as the version we fetched.
- Release the read lock.
- Actually do the fetch.
This makes sure that any time you do a read, you always read the most recently acknowledged write. You may have to wait for an internal fetch to happen (this isn't actually implemented yet) but the operation will always work like you expect it to.
When we write (e.g., `git push`) the logic goes like this:
- Get the write lock (unique to the repository).
- Do all the read steps so we're up to date.
- Mark a write pending.
- Do the actual write.
- Bump our version and mark our write finished.
- Release the write lock.
This allows you to write to any replica. Again, you might have to wait for a fetch first, but everything will work like you expect.
There's one notable failure mode here: if the network connection between the repository node and the database fails during the write, the write lock might be released even though a write is ongoing.
The "isWriting" column protects against that, by staying locked if we lose our connection to the database. This will currently "freeze" the repository (prevent any new writes) until an administrator can sort things out, since it'd dangerous to continue doing writes (we may lose data).
(Since we won't actually acknowledge the write, I think, we could probably smooth this out a bit and make it self-healing //most// of the time: basically, have the broken node rewind itself by updating from another good node. But that's a little more complex.)
Test Plan:
- Pushed changes to a cluster-mode repository.
- Viewed web interface, saw "writing" flag and version changes.
- Pulled changes.
- Faked various failures, got sensible states.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15688
Summary: Closes T10690
Test Plan: Open Badges application, go to Advanced Search, search for a badge by its name and see result.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Maniphest Tasks: T10690
Differential Revision: https://secure.phabricator.com/D15656
Summary: Ref T6027. This converts the old transaction records to the new format so we don't have to keep legacy code around.
Test Plan: Migrated tasks, browsed around, looked at transaction records, didn't see any issues.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6027
Differential Revision: https://secure.phabricator.com/D15637
Summary: Ref T7303. This interaction is very oldschool; modernize it to enable/disable instead of "nuke from orbit".
Test Plan:
- Enabled applications.
- Disabled applications.
- Viewed applications in list view.
- Generated new tokens.
- Tried to use a token from a disabled application (got rebuffed).
- Tried to use a token from an enabled application (worked fine).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7303
Differential Revision: https://secure.phabricator.com/D15620
Summary: Ref T7303. This application is currently stone-age tech (no transactions, hard "delete" action). Bring it up to modern specs.
Test Plan:
- Created and edited an OAuth application.
- Viewed transaction record.
- Tried to create something with no name, invalid redirect URI, etc. Was gently rebuffed with detailed explanatory errors.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7303
Differential Revision: https://secure.phabricator.com/D15609
Summary: Adds basic commenting to Fund Initiatives.
Test Plan: Leave a comment, see comment.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15554
Summary:
Ref T10537. Currently, Nuance has a `NuanceRequestor` object, intended to represent the external user who created content (e.g., a GitHub account or a Twitter account or whatever).
This object is currently almost unused, and its design predates Doorkeeper. In D15541, I chose to use doorkeeper objects instead of NuanceRequestor objects to represent requestors.
I don't currently anticipate a need for such an object, given that we have Doorkeeper. If we do need it in the future for some reason, it would be fairly easy to restore it, create a requestor type which wraps a Doorkeeper object, and then migrate. Not super thrilling to do that, but not a huge mess.
`NuanceItem` still has a `requestorPHID`, but this is now a less formal object PHID instead of a more formal Requestor-object PHID, and holds a doorkeeper exeternal object PHID for GitHub events.
Test Plan:
- Grepped for `nuancerequestor`.
- Ran `bin/storage upgrade -f`.
- Grepped for `requestor`, remaining uses of this term seem reasonable/correct.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10537
Differential Revision: https://secure.phabricator.com/D15546
Summary: Ref T8996, Convert badge recipients from Edges to actual BadgeAward objects
Test Plan: Create badge, award it to recipient. Make sure adding/removing recipients works. (Still need to migrate exisiting recipients to new table and need to create activity feed blurbs)
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: chad, Korvin
Maniphest Tasks: T8996
Differential Revision: https://secure.phabricator.com/D15014
Summary:
Ref T10537. For Nuance, I want to introduce new sources (like "GitHub" or "GitHub via Nuance" or something) but this needs to modularize eventually.
Split ContentSource apart so applications can add new content sources.
Test Plan:
This change has huge surface area, so I'll hold it until post-release. I think it's fairly safe (and if it does break anything, the breaks should be fatals, not anything subtle or difficult to fix), there's just no reason not to hold it for a few hours.
- Viewed new module page.
- Grepped for all removed functions/constants.
- Viewed some transactions.
- Hovered over timestamps to get content source details.
- Added a comment via Conduit.
- Added a comment via web.
- Ran `bin/storage upgrade --namespace XXXXX --no-quickstart -f` to re-run all historic migrations.
- Generated some objects with `bin/lipsum`.
- Ran a bulk job on some tasks.
- Ran unit tests.
{F1190182}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10537
Differential Revision: https://secure.phabricator.com/D15521
Summary:
Ref T10537. Generally, when users interact with Nuance items we'll dump a command into a queue and apply it in the background. This avoids race conditions with multiple users interacting with an item, which Nuance is more subject to than other applications because it has an import/external component.
The "sync" command doesn't actually do anything yet.
Test Plan: {F1186365}
Reviewers: chad
Reviewed By: chad
Subscribers: Luke081515.2
Maniphest Tasks: T10537
Differential Revision: https://secure.phabricator.com/D15506
Summary:
Ref T10537. These are objects which are bound to some external object, like a Maniphest task which is a representation of a GitHub issue.
This doesn't do much yet and may change, but my thinking is:
- I'm putting these on-object instead of on edges because I think we want to actively change the UI for them (e.g., clearly call out that the object is bridged) but don't want every page to need to do extra queries in the common case where zero bridged objects exist anywhere in the system.
- I'm making these one-to-one, more or less: an issue can't be bridged to a bunch of tasks, nor can a bunch of tasks be bridged to a single issue. Pretty sure this makes sense? I can't come up with any reasonable, realistic cases where you want a single GitHub issue to publish to multiple different tasks in Maniphest.
- Technically, one type of each bridgable object could be bridged, but I expect this to never actually occur. Hopefully.
Test Plan: Ran storage upgrade, loaded some pages.
Reviewers: chad
Reviewed By: chad
Subscribers: Luke081515.2
Maniphest Tasks: T10537
Differential Revision: https://secure.phabricator.com/D15502
Summary:
Ref T7789. This implements:
- A new table to store the `<objectHash, filePHID>` relationship between Git LFS files and Phabricator file objects.
- A basic response to `batch` commands, which return actions for a list of files.
Test Plan:
Ran `git lfs push origin master`, got a little further than previously:
```
epriestley@orbital ~/dev/scratch/poemslocal $ git lfs push origin master
Git LFS: (2 of 1 files) 174.24 KB / 87.12 KB
Git LFS operation "upload/b7e0aeb82a03d627c6aa5fc1bbfd454b6789d9d9affc8607d40168fa18cf6c69" is not supported by this server.
Git LFS operation "upload/b7e0aeb82a03d627c6aa5fc1bbfd454b6789d9d9affc8607d40168fa18cf6c69" is not supported by this server.
```
With `GIT_TRACE=1`, this shows the batch part of the API going through.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7789
Differential Revision: https://secure.phabricator.com/D15489
Summary:
Ref T10603. This makes minor updates to temporary tokens:
- Rename `objectPHID` (which is sometimes used to store some other kind of identifier instead of a PHID) to `tokenResource` (i.e., which resource does this token permit access to?).
- Add a `userPHID` column. For LFS tokens and some other types of tokens, I want to bind the token to both a resource (like a repository) and a user.
- Add a `properties` column. This makes tokens more flexible and supports custom behavior (like scoping LFS tokens even more tightly).
Test Plan:
- Ran `bin/storage upgrade -f`, got a clean upgrade.
- Viewed one-time tokens.
- Revoked one token.
- Revoked all tokens.
- Performed a one-time login.
- Performed a password reset.
- Added an MFA token.
- Removed an MFA token.
- Used a file token to view a file.
- Verified file token was removed after viewing file.
- Linked my account to an OAuth1 account (Twitter).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10603
Differential Revision: https://secure.phabricator.com/D15478
Summary:
Ref T10537. Ref T10538. This polls the GitHub events API and creates Nuance items from the raw data.
It does nothing useful with them.
Test Plan:
- Polled GitHub.
- Saw some items get created.
- X-Poll-Interval seemed to work.
- ETag seemed to work.
- Recognizing when we hit items we've already seen seemed to work.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10537, T10538
Differential Revision: https://secure.phabricator.com/D15440
Summary:
Ref T10537. More infrastructure:
- Put a `bin/nuance` in place with `bin/nuance import`. This has no useful behavior yet.
- Allow sources to be searched by substring. This supports `bin/nuance import --source whatever` so you don't have to dig up PHIDs.
Test Plan:
- Applied migrations.
- Ran `bin/nuance import --source ...` (no meaningful effect, but works fine).
- Searched for sources by substring in the UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10537
Differential Revision: https://secure.phabricator.com/D15436
Summary:
Ref T10537. Some sources (like the future "GitHub Repository" source) need to poll remotes.
- Provide a mechanism for sources to emit import cursors.
- Hook them into the trigger daemon so they'll fire periodically.
- Provide some storage.
This diff does nothing useful or interesting, and is pure infrastructure.
Test Plan:
- Ran `bin/storage upgrade -f`, no adjustment issues.
- Poked around Nuance.
- Ran the trigger daemon, verified it didn't crash and checked for Nuance stuff to do.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10537
Differential Revision: https://secure.phabricator.com/D15435
Summary:
Ref T10457.
- Let blueprints be tagged so you can search and annotate them a little more easily.
- Give each blueprint type an optional icon to make things a little easier to parse visually.
Test Plan:
- Tagged blueprints.
- Searched by tags.
- Looked at nice little icons.
{F1139712}
Reviewers: chad
Reviewed By: chad
Subscribers: yelirekim
Maniphest Tasks: T10457
Differential Revision: https://secure.phabricator.com/D15392
Summary:
Ref T10457. The ngram indexing seems to be working well; extend it into Drydock.
Also clean up the list controller a little bit.
Test Plan:
- Ran migrations.
- Searched for blueprints by name.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10457
Differential Revision: https://secure.phabricator.com/D15389
Summary: Ref T10457. Allow build plans to be queried by name.
Test Plan:
- Searched for plans by name.
- Renamed a plan, searched for new name.
{F1133085}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10457
Differential Revision: https://secure.phabricator.com/D15359
Summary:
Ref T10449. Currently, we store classes (like "AlmanacClusterRepositoryServiceType") in the database.
Instead, store types (like "cluster.repository").
This is a small change, but types are a little more flexible (they let us freely reanme classes), a little cleaner (fewer magic strings in the codebase), and a little better for API usage (they're more human readable).
Make this minor usability change now, before we unprototype.
Also make services searchable by type.
Also remove old Almanac API endpoints.
Test Plan:
- Ran migration, verified all data migrated properly.
- Created, edited, rebound, and changed properties of services.
- Searched for services by service type.
- Reviewed available Conduit methods.
Reviewers: chad
Reviewed By: chad
Subscribers: yelirekim
Maniphest Tasks: T10449
Differential Revision: https://secure.phabricator.com/D15346
Summary:
Fixes T9762. Ref T10246.
**Disabling Bindings**: Previously, there was no formal way to disable bindings. The internal callers sometimes check some informal property on the binding, but this is a common need and deserves first-class support in the UI. Allow bindings to be disabled.
**Deleting Interfaces**: Previously, you could not delete interfaces. Now, you can delete unused interfaces.
Also some minor cleanup and slightly less mysterious documentation.
Test Plan: Disabled bindings and deleted interfaces.
Reviewers: chad
Reviewed By: chad
Subscribers: yelirekim
Maniphest Tasks: T9762, T10246
Differential Revision: https://secure.phabricator.com/D15345
Summary:
Fixes T6741. Ref T10246. Broadly, we want to protect Almanac cluster services:
- Today, against users in the Phacility cluster accidentally breaking their own instances.
- In the future, against attackers compromising administrative accounts and adding a new "cluster database" which points at hardware they control.
The way this works right now is really complicated: there's a global "can create cluster services" setting, and then separate per-service and per-device locks.
Instead, change "Can Create Cluster Services" into "Can Manage Cluster Services". Require this permission (in addition to normal permissions) to edit or create any cluster service.
This permission can be locked to "No One" via config (as we do in the Phacility cluster) so we only need this one simple setting.
There's also zero reason to individually lock //some// of the cluster services.
Also improve extended policy errors.
The UI here is still a little heavy-handed, but should be good enough for the moment.
Test Plan:
- Ran migrations.
- Verified that cluster services and bindings reported that they belonged to the cluster.
- Edited a cluster binding.
- Verified that the bound device was marked as a cluster device
- Moved a cluster binding, verified the old device was unmarked as a cluster device.
- Tried to edit a cluster device as an unprivileged user, got a sensible error.
{F1126552}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6741, T10246
Differential Revision: https://secure.phabricator.com/D15339
Summary:
I'm having trouble figuring out exactly what the timeframe on this was, but for a while in November we were not writing edges between pastes and their attached files correctly.
An example of this on this install is here:
https://secure.phabricator.com/P1893
That will start working once the migration runs, but until it does it shows this:
{F1126605}
This got fixed so recent stuff works fine, but it looks like WMF updated while the bug was active so they have more affected pastes than we do (we only have about 10).
Test Plan:
Ran this query to find pastes with missing edges:
```
select id, FROM_UNIXTIME(p.dateCreated) from pastebin_paste p LEFT JOIN edge ON edge.src = p.phid AND edge.type = 25 WHERE edge.dst IS NULL order by id;
```
Ran the migration.
Verified the edges were fixed.
Viewed one of the affected pastes, things now worked properly.
Reviewers: chad
Reviewed By: chad
Subscribers: 20after4
Differential Revision: https://secure.phabricator.com/D15340
Summary:
Fixes T10410. Immediate impact of this is that you can now actually delete properties from Almanac services, devices and bindings.
The meat of the change is switching from CustomField to EditEngine for most of the actual editing logic. CustomField creates a lot of problems with using EditEngine for everything else (D15326), and weird, hard-to-resolve bugs like this one (not being able to delete stuff).
Using EditEngine to do this stuff instead seems like it works out much better -- I did this in ProfilePanel first and am happy with how it looks.
This also makes the internal storage for properties JSON instead of raw text.
Test Plan:
- Created, edited and deleted properties on services, devices and bindings.
- Edited and reset builtin properties on repository services.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10410
Differential Revision: https://secure.phabricator.com/D15327
Summary:
Ref T6741. Ref T10246.
Root problem: to provide Drydock in the cluster, we need to expose Almanac, and doing so would let users accidentally or intentionally create a bunch of `repo006.phacility.net` devices/services which could conflict with the real ones we manage.
There's currently no way to say "you can't create anything named `*.blah.net`". This adds "namespaces", which let you do that (well, not yet, but they will after the next diff).
After the next diff, if you try to create `repo003.phacility.net`, but the namespace `phacility.net` already exists and you don't have permission to edit it, you'll be asked to choose a different name.
Also various modernizations and some new docs.
Test Plan:
- Created cool namespaces like `this.computer`.
- Almanac namespaces don't actually enforce policies yet.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6741, T10246
Differential Revision: https://secure.phabricator.com/D15324
Summary: Ref T6741. Ref T10246. This is largely modernization, but will partially support namespace locking in Almanac.
Test Plan:
Searched for Almanac networks by name substring.
{F1121740}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6741, T10246
Differential Revision: https://secure.phabricator.com/D15322
Summary: Ref T10246. Build an ngram index for Almanac services, and use it to support improved search.
Test Plan: {F1121725}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10246
Differential Revision: https://secure.phabricator.com/D15321
Summary:
Ref T10205. Ref T10246. This is general modernization, but also supports fixing the interface datasource in T10205.
- Update Query.
- Update SearchEngine.
- Use an ngrams index for searching names efficiently.
Test Plan:
- Ran migrations.
- Searched Almanac devices by name.
- Created a new device, searched for it by name.
{F1121303}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10205, T10246
Differential Revision: https://secure.phabricator.com/D15319
Summary:
Ref T4245. This could still use a little UI smoothing, but:
- Don't require a callsign on the create flow (you can add one later in "Edit Basic Information" if you want).
- Allow existing callsigns to be removed.
Test Plan:
- Created a new repository with no callsign.
- Cloned it; pushed to it.
- Browsed around Diffusion a bunch.
- Visited a commit URI.
- Added a callsign to it.
- Removed the callsign again.
- Referenced it with `R22` in remarkup.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D15305
Summary: Fixes T10360. In modern code, most of the meat is automatic.
Test Plan:
- Edited view policy and edit policy from web UI.
- Viewed package, saw policy badge in header.
- Tried to edit a package as a user without permission, got appropriate disabled states and errors.
- Changed policies via Conduit.
- Tried to view a package as a user without permission.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10360
Differential Revision: https://secure.phabricator.com/D15275
Summary:
Fixes T6641. This allows users who have permission to edit a project to use "Save as Default" to save the current order and filter as defaults for the project.
These are per-board defaults, and apply to all users. The rationale is that I think the best default ordering/filtering depends mostly on the board, not the viewer.
This seems to align with most requests in the task, although rationale is a bit light. But, for example, it seems reasonable you might want to change the default filter to "All Tasks" on a sprint board, so you can see what's in the "Done" column.
This also fixes some minor issues I ran into:
- Herald could hit an issue while checking permissions if the project was a subproject and a non-member had a triggering rule.
- "Advanced filter..." did not prefill with the current filter.
Test Plan:
- Set default order and filter on a workboard.
- Reloaded board, saw settings stick.
- Tried to edit a board as an unprivileged user (disabled menu items, error).
- Reviewed transaction log.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6641
Differential Revision: https://secure.phabricator.com/D15260
Summary:
Currently never read or written.
Supports fractions.
There's no such thing as an unsigned double so this also supports negative values, technically, although I'll eventually prevent this in the UI.
Test Plan: `bin/storage upgrade`, then created and edited a task. Nothing was different.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15218
Summary:
Before edges, we stored some of this stuff directly on tasks.
- `attached` was migrated to edges in Jan 2013.
- `projectPHIDs` was never used, as far as I can tell?
- `ccPHIDs` was migrated away and dropped more than a year ago.
None of these columns are used in modern code (instead, modern code uses edges).
Test Plan: `grep`, browsed around, `bin/storage upgrade`, unit tests.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15216
Summary:
No way to set photos yet, but if you magic them in they work.
Primarily, this consolidates rendering logic so the move + edit + view controllers all run the same code to do tags / cover photos.
Test Plan: {F1095870}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15201
Summary:
Ref T10010. These aren't perfect but I think (?) they aren't horribly broken.
- When a project is a parent project, destroy (as far as the user can tell) any custom columns.
- When a project has milestones, automatically generate columns on the project's workboard (if it has a workboard).
- When you move tasks between milestones, add the proper milestone tag.
- When you move tasks out of milestones back into the backlog, add the proper parent project tag.
- (Plenty of UI / design stuff to adjust.)
Test Plan:
- Dragged stuff between milestone columns.
- Used a normal workboard.
- Wasn't able to find any egregiously bad cases that did anything terrible.
{F1088224}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D15171
Summary: Fixes T10259. There was no real reason to do this `ip2long()` stuff in the first place -- it's very slightly smaller, but won't work with ipv6 and the savings are miniscule.
Test Plan:
- Ran migration.
- Viewed logs in web UI.
- Pulled and pushed.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10259
Differential Revision: https://secure.phabricator.com/D15165
Summary:
Ref T10228. This is currently quite limited:
- No UI.
- No SSH support.
My primary goal is to debug the issue in T10228. In the long run we can expand this to be a bit fancier.
Test Plan:
Made various valid and invalid clones, got sucess responses and not-so-successful responses, viewed the log table for general corresponding messages and broad sanity.
Ran GC via `bin/phd debug trigger`, no issues.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10228
Differential Revision: https://secure.phabricator.com/D15127
Summary: Ref T10054. This primarily improves aesthetics and consistency for member/wathcher lists in projects.
Test Plan:
{F1068873}
{F1068874}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15103
Summary:
Ref T10054. Ref T6961.
- Existing projects with workboards had "Workboard" as the default menu item. Retain this behavior.
- Populate the recently-added `hasWorkboard` flag so we can do a couple of things a little faster (see T6961).
Test Plan:
- Ran migration.
- Verified a bunch of projects looked sensible/correct after the migration.
- Created a workboard, verified `hasWorkboard` got set properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6961, T10054
Differential Revision: https://secure.phabricator.com/D15093
Summary:
Ref T10054. Ref T6113. Users can currently subscribe to projects, which causes them to receive:
# mail about project membership changes, description changes, etc; and
# mail to the project, e.g. when the project is added as a subscriber on a task, or a reviewer on a revision.
Almost no one cares about (1), and after D15061 you can use Herald to get this stuff if you really want it. (It will get progressively more annoying in the future with external membership sources causing automated project membership updates.)
A lot of users are confused about (2) and how it relates to membership, watching, etc, and most users who want (2) don't want (1).
Instead, add an explicit option for this and explain what it does.
This is fairly verbose but I've hidden it on the member/watch screen, which is now the "explain how projects work" screen, I guess.
Test Plan:
{F1064929}
{F1064930}
{F1064931}
- Disabled/enabled mail for a project.
- Sent mail to a project with mail disabled, verified I didn't get a copy.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6113, T10054
Differential Revision: https://secure.phabricator.com/D15065
Summary: This hasn't been updated in about 6 months, and keeping it fresh makes tests and instance launches a little faster.
Test Plan: Ran `storage upgrade` on clean namespaces before and after patch, got ~5.6s before and ~4.2s after.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15055
Summary:
Ref T10054. This does a big chunk of the legwork to let users reconfigure profile menus (currently, just project menus).
This includes:
- Editing builtin items (e.g., you can rename the default items).
- Creating new items (for now, only links are available).
This does not yet include:
- Hiding items.
- Reordering items.
- Lots of fancy types of items (dashboards, etc).
- Any UI changes.
- Documentation (does feature: TODO link for documentation).
Test Plan:
{F1060695}
{F1060696}
{F1060697}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15010
Summary:
Ref T4705 (there are also some other adjacent related tasks dealing with URIs).
Currently, we issue a "get repositories matching URIs: ..." query by loading every possible repository and then checking their URIs in PHP.
Instead, put URIs in a separate table. I plan for each repository to potentially have multiple URIs soon, so this prepares for that.
Test Plan:
- Ran migrations.
- Looked at index table, made sure it appeared sensible.
- Ran some queries by `uri` to find repositories, found the repositories I expected.
- Updated the remote URI of a repository, saw queries / index update appropriately.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4705
Differential Revision: https://secure.phabricator.com/D15005
Summary:
Ref T4245.
- Rename "Clone/Checkout As" to "Short Name" in the UI.
- Allow any repository to have a short name, not just hosted repositories.
Test Plan:
- Ran migration.
- Reviewed old transactions, saw they looked good.
- Edited an existing repository's short name.
- Gave an imported repository a new short name.
- Removed a repository's short name.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D14989
Summary:
Fixes T7938.
- Primarily, users can currently shoot themselves in the foot by putting `../../etc/passwd` and other similar nonsense in these fields (this is not dangerous, but also does not work). Require sensible names.
- Enforce uniqueness so these names can be used in URIs and as identifiers in the future.
- (This doesn't start actually using them for anything fancy yet.)
Test Plan:
- Gave several repositories clone names: a valid name, two duplicate names, an invalid, name, some with no names.
- Ran migrations.
- Got clean conversion for valid names, appropriate errors for invalid/duplicate names.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7938
Differential Revision: https://secure.phabricator.com/D14986
Summary:
Ref T10010. Ref T5819. General alignment of the stars:
- There were some hacks in Conduit around stripping `fa-...` off icons when reading and writing that I wanted to get rid of.
- We probably have room for a subtitle in the new heavy nav, and using the icon name is a good starting point (and maybe good enough on its own?)
- The project list was real bad looking with redundant tag/names, now it is very slightly less bad looking with non-redundant types?
- Some installs will want to call Milestones something else, and this gets us a big part of the way there.
- This may slightly help to reinforce "tag" vs "policy" vs "group" stuff?
---
I'm letting installs have enough rope to shoot themselves in the foot (e.g., define 100 icons). It isn't the end of the world if they reuse icons, and is clearly their fault.
I think the cases where 100 icons will break down are:
- Icon selector dialog may get very unwieldy.
- Query UI will be pretty iffy/huge with 100 icons.
We could improve these fairly easily if an install comes up with a reasonable use case for having 100 icons.
---
The UI on the icon itself in the list views is a little iffy -- mostly, it's too saturated/bold.
I'd ideally like to try either:
- rendering a "shade" version (i.e. lighter, less-saturated color); or
- rendering a "shade" tag with just the icon in it.
However, there didn't seem to be a way to do the first one right now (`fa-example sh-blue` doesn't work) and the second one had weird margins/padding, so I left it like this for now. I figure we can clean it up once we build the thick nav, since that will probably also want an identical element.
(I don't want to render a full tag with the icon + name since I think that's confusing -- it looks like a project/object tag, but is not.)
Test Plan:
{F1049905}
{F1049906}
Reviewers: chad
Reviewed By: chad
Subscribers: 20after4, Luke081515.2
Maniphest Tasks: T5819, T10010
Differential Revision: https://secure.phabricator.com/D14918
Summary:
Ref T10010. This will allow us to find superprojects with `withMemberPHIDs(...)` queries.
- Copy all the current real member edges to materialized member edges.
- Redirect all reads to look at materialized members.
- This table is already kept in sync by earlier work with indexing.
Basically, flow is:
- Writes (joining, leaving, adding/removing members) write to the real member edge type.
- After a project's members change, they're copied to the materialized member edge type for that project and all of its superprojects.
- Reads look at materialized members, so "Parent" sees the members of "Child" and "Grandchild" as its own members, but we still have the "real members" edge type to keep track of "natural" or "direct" members.
Test Plan:
- Ran migration.
- Ran unit tests.
- Saw the same projects as projects I was a member of.
- Added some `var_dump()` stuff to verify the Owners changed.
- Used `grep` to look for other readers of this edge type.
- Made some project updates.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D14893
Summary:
Ref T9994.
- Allow errors to be dismissed.
- Tailor messaging for closed/abandoned revisions.
- Reduce scare messaging on land dialog, since it's not really that scary anymore.
Test Plan:
- Dismissed errors.
- Hit new warnings.
- Wasn't as scared when landing.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9994
Differential Revision: https://secure.phabricator.com/D14886
Summary:
Ref T10010. This adds infrastructure for querying projects by type, depth, parent and ancestor.
I needed to revise the "extended policy check" cycle detection rules. When, e.g., querying a grandchild, they incorrectly detected a cycle because both the child and grandchild needed to check the policy of the grandparent.
Instead, simplify it to just do a basic runaway calldepth check. There are many other safety mechanisms to make it so this can't ever occur.
(Cycle detection does have existing test coverage, and those tests still pass, it just takes a little longer to detect the cycle internally.)
There is still no way to create subprojects in the UI.
Test Plan: Added and executed unit tests.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D14862
Summary:
Ref T10010. This implements technical groundwork for subprojects. Specifically, it implements policy rules like Phriction:
- to see a project, you must be able to see all of its parents (and the project itself).
- you can edit a project if you can edit any of its parents (or the project itself).
To facilitiate this, we load all project ancestors when querying projects so we can do the view/edit checks.
This does NOT yet implement:
- proper membership rules for these projects (up next);
- any kind of UI to let users create subprojects.
Test Plan:
- Added unit tests.
- Executed unit tests.
- Browsed Projects (no change in behavior is expected).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D14861
Summary:
Ref T9979. This uses ngrams (specifically, trigrams) to build a reasonably efficient index for substring matching. Specifically, for a package like "Example", with ID 123, we store rows like this:
```
< ex, 123>
<exa, 123>
<xam, 123>
<amp, 123>
<mpl, 123>
<ple, 123>
<le , 123>
```
When the user searches for `exam`, we join this table for packages with tokens `exa` and `xam`. MySQL can do this a lot more efficiently than it can process a `LIKE "%exam%"` query against a huge table.
When the user searches for a one-letter or two-letter string, we only search the beginnings of words. This is probably what they want, the only thing we can do quickly, and a reasonable/expected behavior for typeaheads.
Test Plan:
- Ran storage upgrades and search indexer.
- Searched for stuff with "name contains".
- Used typehaead and got sensible results.
- Searched for `aabbccddeeffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz` and saw only 16 joins.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9979
Differential Revision: https://secure.phabricator.com/D14846
Summary:
Fixes T9890. This allows IndexExtensions to emit an object version.
Before we build indexes, we check if the indexed version is the same as the current version. If it is, we just don't call that extension.
T9890 has a case where this is useful: a script went crazy and posted thousands of comments to a single task.
Without versioning, that results in the same comments being indexed over and over again. With versioning, most of the queue could just exit without doing any work.
Test Plan:
- Added a `sleep(1)` to the actual indexing, used `bin/search index --background` to queue up a lot of tasks, ran them with `bin/phd debug task`, saw them complete very quickly with only one actual index operation performed.
- Used `bin/search index --trace` and `bin/search index --trace --background` to observe the behavior of queries against the index version store, which looked sensible.
- Made comments/transactions, saw versions update.
- Used `bin/remove destroy`, verified index versions were purged.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9890
Differential Revision: https://secure.phabricator.com/D14845
Summary: Ref T9967
Test Plan:
Ran migrations.
Verified database populated properly with PHIDs (SELECT * FROM auth_sshkey;).
Ran auth.querypublickeys conduit method to see phids show up
Ran bin/remove destroy <phid>.
Viewed the test key was gone.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Maniphest Tasks: T9967
Differential Revision: https://secure.phabricator.com/D14823
Summary:
Ref T10010. This does some cleanups on the schema:
- `viewPolicy`, `editPolicy` and `joinPolicy` were nullable, but should never be `null`. Set them to defaults if they're null, then make the column non-nullable.
- Rename `phrictionSlug` to `primarySlug` and stop adding and removing trailing slashes from it.
- Add new columns to support milestones and non-milestone subprojects.
- Drop very old subprojectPHIDs column. This hasn't done anything in the UI for years and years, and isn't particularly realistic to migrate forward.
The new columns aren't reachable from the UI.
Test Plan:
- Applied patches.
- Grepped for `phrictionSlug`.
- Grepped for `subprojectPHIDs`.
- Created tasks.
- Edited tasks.
- Verified existing tasks still had primary slugs.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D14825
Summary:
Fixes T9995. I think letting users customize slugs is not a hugely compelling as a product feature, and this fixes the issue with slugs that have "/" characters in them and makes the move to EditEngine easier since I don't have to deal with the weird JS thing.
Instead, just generate slugs automatically. No more JS, no more separate field, things automatically update if you rename a blog, and now that URIs have IDs in them the old URI will still work after a rename.
Test Plan:
- Applied migration.
- Created new posts.
- Edited existing posts.
- Visited various posts.
- Created a post with a bunch of "/" in the title, things still worked fine.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9995
Differential Revision: https://secure.phabricator.com/D14792
Summary: Ref T9952. See discussion there. This change is primarily aimed at letting me build a typeahead of branches in a repository so that we can land to arbitrary branches a few diffs from now.
Test Plan:
- Ran migrations.
- Verified database populated properly with PHIDs (`SELECT * FROM repository_refcursor;`).
- Ran `bin/repository update`.
- Viewed a Git repository in Diffusion.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9952
Differential Revision: https://secure.phabricator.com/D14731
Summary:
Ref T9908. Simplify some of the policies here:
- If you can edit an application (currently, always "Administrators"), you can view and edit all of its forms.
- You must be able to edit an application to create new forms.
- Improve some error messages.
- Get about halfway through letting users reorder forms in the "Create" menu if they want to sort by something weird since it'll need schema changes and I can do them all in one go here.
Test Plan:
- Tried to create and edit forms as an unprivileged user.
- Created and edited forms as an administrator.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9908
Differential Revision: https://secure.phabricator.com/D14700
Summary:
Ref T9132. Fixes T5031. This approximately implements the plan described in T5031#67988:
When we recieve a preview request, don't write a draft if the form is from a version of the object before the last update the viewer made.
This should fix the race-related (?) zombie draft comments that sometimes show up.
I just added a new object for this stuff to make it easier to do stacked actions (or whatever we end up with) a little later, since I needed to do some schema adjustments anyway.
Test Plan:
- Typed some text.
- Reloaded page.
- Draft stayed there.
- Tried real hard to get it to ghost by submitting stuff in multiple windows and typing a lot and couldn't, although I didn't bother specifically narrowing down the race condition.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5031, T9132
Differential Revision: https://secure.phabricator.com/D14640
Summary: Will use these more in the upcoming unbeta design of PhameBlog, likely. Also curious how this works.
Test Plan: Add an image to a blog, remove an image from a blog.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14587
Summary: Removes "delete" and uses "archive/activate" instead for Phame Blogs. Ref T9756
Test Plan: Archive a blog, see in search, activate blog, see in other search.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: joshuaspence, Korvin
Maniphest Tasks: T9756
Differential Revision: https://secure.phabricator.com/D14465
Summary:
Ref T9787. To fix this, I want to change how file PHIDs are extracted slightly: specifically, I'm going to extract them later in the editing process.
Before doing this, clean up a couple of bad implementations:
- Owners extracts its description as a file PHID. This is an error.
- Extract the description as a remarkup block instead.
- Add an edge table so stuff like file attachment works properly.
- Differential has a no-op extract method. This is presumably just a copy/paste issue from long ago.
Test Plan:
- Edited a revision in Differential.
- Dropped a file into the description of an Owners package.
- Before change: this did not attach the file.
- After change: the file now attaches properly and shows up as "Attached" in the file details.
Reviewers: chad, joshuaspence
Reviewed By: joshuaspence
Subscribers: joshuaspence
Maniphest Tasks: T9787
Differential Revision: https://secure.phabricator.com/D14493
Summary: Fixes T9757.
Test Plan: Created a Herald rule and then subscribed to it with a different account.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Maniphest Tasks: T9757
Differential Revision: https://secure.phabricator.com/D14468
Summary: Rename the XHPAST database from `{$NAMESPACE}_xpastview` to `{$NAMESPACE}_xhpast`.
Test Plan: Ran `./bin/storage --namespace test upgrade --no-quickstart`.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14442
Summary: Ref T7053. Remove the `envHash` and `envInfo` fields, which are no longer used now that the daemons restart automagically. Depends on D14458.
Test Plan: Saw no more setup issues.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: tycho.tatitscheff, epriestley
Maniphest Tasks: T7053
Differential Revision: https://secure.phabricator.com/D14446
Summary:
Ref T9132. This diff doesn't do anything interesting, it just lays the groundwork for more interesting future diffs.
Broadly, the idea here is to let you create multiple views of each edit form. For example, we might create several different "Create Task" forms, like:
- "New Bug Report"
- "New Feature Request"
These would be views of the "Create Task" form, but with various adjustments:
- A form might have additional instructions ("how to file a good bug report").
- A form might have prefilled values for some fields (like particular projects, subscribers, or policies).
- A form might have some fields locked (so they can not be edited) or hidden.
- A form might have a different field order.
- A form might have a limited visibility policy, so only some users can access it.
This diff adds a new storage object (`EditEngineConfiguration`) to keep track of all those customizations and represent "a form which has been configured to look and work a certain way".
This doesn't let these configurations do anything useful/interesting, and you can't access them directly yet, it's just all the boring plumbing to enable more interesting behavior in the future.
Test Plan:
ApplicationEditor forms now let you manage available forms and edit the current form:
{F959025}
There's a new (bare bones) list of all available engines:
{F959030}
And if you jump into an engine, you can see all the forms for it:
{F959038}
The actual form configurations have standard detail/edit pages. The edit pages are themselves driven by ApplicationEditor, of course, so you can edit the form for editing forms.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14453
Summary: Adds commenting to Phame Posts, also testing a new "document comment style". Unsure about it but Phame is a prototype so good place to explore.
Test Plan: Leave some comments, see some comments, test show/hide.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9746
Differential Revision: https://secure.phabricator.com/D14451
Summary:
This diff adds a new mode argument to the Diffusion Conduit API with two options:
- "overwrite": the default, maintains the current behavior of deleting all coverage
in the specified branch before uploading the new coverage
- "update": does not delete old coverage, but will overwrite previous
coverage information if it's for the same file and commit
`DiffusionRequest::loadCoverage` already loads a file's coverage from the
latest available commit, so uploading coverage for different files in different
commits with "update" will result in seeing the latest uploaded coverage in
Diffusion.
Test Plan: manual local verification
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14428
Summary: Drops Join Policy, uses Edit Policy where needed. Allows anyone with Blog Edit permissions to post and edit any post on that blog. Fixes T5371
Test Plan: Draft Post as chad, see post, log in with notchad, edit that post and publish it.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T5371
Differential Revision: https://secure.phabricator.com/D14444
Summary: Currently, a bunch of developers are using #xhpast for writing custom linter rules. As such, we end up with a fair few `XHPASTSyntaxErrorException` in our PHP error logs. I think that throwing an exception is not quite correct in this case because it is somewhat expected that invalid PHP may be entered. Instead, catch the exception and show the user a helpful message.
Test Plan: This doesn't quite work yet... the stream and tree views render as blank but the exceptions still propogate to the error logs. Mostly, I'm not sure how the exception should be rendered for display.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14028
Summary: Add some mailkeys, allow feed stories to be published.
Test Plan: New Blog, Edit Blog
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14434
Summary: Allows feed stories and mail for new Phame Posts.
Test Plan: Write Post, Get Mail
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14426
Summary:
Fix T9662.
Record who initiated the build, and allow this information as a parameter.
In this implementation, a 're-run' keeps the original initiator, which we maybe not desired?
Test Plan:
Make a HTTP step with initiator.phid, trigger manually, via HM, via ./bin/harbormaster build.
Look at requests made.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T9662
Differential Revision: https://secure.phabricator.com/D14380
Summary: We haven't seen any issues here, remove the table and schema spec.
Test Plan: Not yet tested.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14067
Summary:
Ref T9614. Currently, a lot of Build Plan behavior is covered by a global "can manage" policy.
One install in particular is experiencing difficulty with warring factions within engineering aborting one another's builds.
As a first step to remedy this, and also generally make Harbormaster more flexible and bring it in line with other applications in terms of policy power:
- Give Build Plans normal view/edit policies.
- Require "Can Edit" to run a plan manually.
Having "Can View" on plans may be a little weird in some cases (the status of a Buildable might be bad because of a build you can't see) but we can cross that bridge when we come to it.
Next change here will require "Can Edit" to abort a build. This will reasonably allow installs to reserve pause/abort for administrators/adults. (I might let anyone restart a plan, though?)
Test Plan:
- Created a new build plan.
- Verified defaults were inherited from application defaults (swapped them around, too).
- Saved build plan.
- Edited policies.
- Verified autoplans get the right policies.
- Verified old plans got migrated properly.
- Tried to run a plan I couldn't edit (denied).
- Ran a plan from CLI with `bin/harbormaster`.
- Tried to create a plan with an unprivileged user.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9614
Differential Revision: https://secure.phabricator.com/D14321
Summary:
It's hard for us to predict how long patches and migrations will take in the general case since it varies a lot from install to install, but we can give installs some kind of rough heads up about longer patches. I'm planning to just put a sort of hint for things in the changelog, something like this:
{F905579}
To make this easier, start storing how long stuff took. I'll write a little script to dump this into a table for the changelog.
Test Plan:
Ran `bin/storage status`:
{F905580}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14320
Summary:
Ref T182. This doesn't do anything interesting yet and is mostly scaffolding, but here's roughly the workflow. From previous revision, you can configure "Repository Automation" for a repository:
{F875741}
If it's configured, a new "Land Revision" button shows up:
{F875743}
Once you click it you get a big warning dialog that it won't work, and then this shows up at the top of the revision (completely temporary/placeholder UI, some day a nice progress bar or whatever):
{F875747}
If you're lucky, the operation eventually sort of works:
{F875750}
It only runs `git show` right now, doesn't actually do any writes or anything.
Test Plan:
- Clicked "Land Revision".
- Watched `phd debug task`.
- Saw it log `git show` to output.
- Verified operation success in UI (by fiddling URL, no way to get there normally yet).
Reviewers: chad
Reviewed By: chad
Subscribers: revi
Maniphest Tasks: T182
Differential Revision: https://secure.phabricator.com/D14266
Summary:
Ref T9551. We currently use the same logic for generating project hashtags and Phriction slugs, but should be a little more conservative with project hashtags.
Stop them from generating with stuff that won't parse in a "Reviewers:" field or generally in commments (commas, colons, etc).
Test Plan:
Created a bunch of projects with nonsense in them and saw them generate pretty reasonable hashtags.
{F873456}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9551
Differential Revision: https://secure.phabricator.com/D14261
Summary:
Ref T9519. When acquiring leases on resources:
- Only consider resources created by authorized blueprints.
- Only consider authorized blueprints when creating new resources.
- Fail with a tailored error if no blueprints are allowed.
- Fail with a tailored error if missing authorizations are causing acquisition failure.
One somewhat-substantial issue with this is that it's pretty hard to figure out from the Harbormaster side. Specifically, the Build step UI does not show field value anywhere, so the presence of unapproved blueprints is not communicated. This is much more clear in Drydock. I'll plan to address this in future changes to Harbormaster, since there are other related/similar issues anyway.
Test Plan: {F872527}
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T9519
Differential Revision: https://secure.phabricator.com/D14254
Summary:
Ref T9519. This is like 80% of the way there and doesn't fully work yet, but roughly shows the shape of things to come. Here's how it works:
First, there's a new custom field type for blueprints which works like a normal typeahead but has some extra logic. It's implemented this way to make it easy to add to Blueprints in Drydock and Build Plans in Harbormaster. Here, I've added a "Use Blueprints" field to the "WorkingCopy" blueprint, so you can control which hosts the working copies are permitted to allocate on:
{F869865}
This control has a bit of custom rendering logic. Instead of rendering a normal list of PHIDs, it renders an annotated list with icons:
{F869866}
These icons show whether the blueprint on the other size of the authorization has approved this object. Once you have a green checkmark, you're good to go.
On the blueprint side, things look like this:
{F869867}
This table shows all the objects which have asked for access to this blueprint. In this case it's showing that one object is approved to use the blueprint since I already approved it, but by default new requests come in here as "Authorization Requested" and someone has to go approve them.
You approve them from within the authorization detail screen:
{F869868}
You can use the "Approve" or "Decline" buttons to allow or prevent use of the blueprint.
This doesn't actually do anything yet -- objects don't need to be authorized in order to use blueprints quite yet. That will come in the next diff, I just wanted to get the UI in reasonable shape first.
The authorization also has a second piece of state, which is whether the request from the object is active or inactive. We use this to keep track of the authorization if the blueprint is (maybe temporarily) deleted.
For example, you might have a Build Plan that uses Blueprints A and B. For a couple days, you only want to use A, so you remove B from the "Use Blueprints: ..." field. Later, you can add B back and it will connect to its old authorization again, so you don't need to go re-approve things (and if you're declined, you stay declined instead of being able to request authorization over and over again). This should make working with authorizations a little easier and less labor intensive.
Stuff not in this diff:
- Actually preventing any allocations (next diff).
- Probably should have transactions for approve/decline, at least, at some point, so there's a log of who did approvals and when.
- Maybe should have a more clear/loud error state when no blueprints are approved?
- Should probably restrict the typeahead to specific blueprint types.
Test Plan:
- Added the field.
- Typed some stuff into it.
- Saw the UI update properly.
- Approved an authorization.
- Declined an authorization.
- Saw active authorizations on a blueprint page.
- Didn't see any inactive authroizations there.
- Clicked "View All Authorizations", saw all authorizations.
Reviewers: chad, hach-que
Reviewed By: chad
Maniphest Tasks: T9519
Differential Revision: https://secure.phabricator.com/D14251
Summary:
Fixes T9500. All the code is fine in D13836, but the value of the constant got updated (from "open" to "active") and the migration still used the old value.
Correct any affected dashboards to use the proper constant.
This only affected old dashboards: newly created ones use the right constant.
Test Plan: Ran migration, verified that all active dashboards appeared on "Active Dashboards".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9500
Differential Revision: https://secure.phabricator.com/D14223
Summary: Ref T9352. See D13635. Build targets can have variables already, but let builds have them too. This mostly enables future use cases (sub-builds, more sophisticated build triggers).
Test Plan: With a custom Herald rule + action like the one in T9352, updated a revision and saw it generate multiple builds with varying parameters.
Reviewers: chad, hach-que
Reviewed By: hach-que
Maniphest Tasks: T9352
Differential Revision: https://secure.phabricator.com/D14222
Summary:
Ref T9252. Long ago you sometimes manually created resources, so they had human-enterable names. However, users never make resources manually any more, so this field isn't really useful any more.
In particular, it means we write a lot of untranslatable strings like "Working Copy" to the database in the default locale. Instead, do the call at runtime so resource names are translatable.
Also clean up a few minor things I hit while kicking the tires here.
It's possible we might eventually want to introduce a human-choosable label so you can rename your favorite resources and this would just be a default name. I don't really have much of a use case for that yet, though, and I'm not sure there will ever be one.
Test Plan:
- Restarted a Harbormaster build, got a clean build.
- Released all leases/resources, restarted build, got a clean build with proper resource names.
Reviewers: hach-que, chad
Reviewed By: hach-que, chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14213
Summary:
Ref T9252. Several general changes here:
- Moves logs to use PHIDs instead of IDs. This generally improves flexibility (for example, it's a lot easier to render handles).
- Adds `blueprintPHID` to logs. Although you can usually figure this out from the leasePHID or resourcePHID, it lets us query relevant logs on Blueprint views.
- Instead of making logs a top-level object, make them strictly a sub-object of Blueprints, Resources and Leases. So you go Drydock > Lease > Logs, etc., to get to logs.
- I might restore the "everything" view eventually, but it doesn't interact well with policies and I'm not sure it's very useful. A policy-violating `bin/drydock log` might be cleaner.
- Policy-wise, we always show you that logs exist, we just don't show you log content if it's about something you can't see. This is similar to seeing restricted handles in other applications.
- Instead of just having a message, give logs "type" + "data". This will let logs be more structured and translatable. This is similar to recent changes to Herald which seem to have worked well.
Test Plan:
Added some placeholder log writes, viewed those logs in the UI.
{F855199}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14196
Summary: I haven't regenerated this for a while and it makes instances and unit tests a little faster.
Test Plan:
- Manually reviewed changes for sanity.
- Ran `arc unit --everything`.
- Observed runtime drop from ~15-16 seconds to ~12-13 seconds.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14192
Summary:
Fixes T6569. This implements an expiry mechanism for Drydock resources which parallels the mechanism for leases.
A few things are missing that we'll probably need in the future:
- An "EXPIRES" command to update the expiration time. This would let resources be permanent while leased, then expire after, say, 24 hours without any leases.
- A callback like `shouldActuallyExpireRightNow()` for resources and leases that lets them decide not to expire at the last second.
- A callback like `didAcquireLease()` for resource blueprints, to parallel `didReleaseLease()`, letting them clear or extend their timer.
However, this stuff would mostly just let us tune behaviors, not really open up new capabilities.
Test Plan: Changed host resources to expire after 60 seconds, leased one, saw it vanish 60 seconds later.
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T6569
Differential Revision: https://secure.phabricator.com/D14176
Summary: Ref T9252. If you have a blueprint and you do not like that blueprint very much, you can disable it.
Test Plan: Disabled / enabled some blueprints.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14156
Summary:
Ref T9252. Drydock currently uses integer statuses, but there's no reason for this (they don't need to be ordered) and it makes debugging them, working with them, future APIs, etc., more cumbersome.
Switch to string instead.
Also rename `STATUS_OPEN` to `STATUS_ACTIVE` and `STATUS_CLOSED` to `STATUS_RELEASED` for consistency. This makes resources and leases have more similar states, and gives resource states more accurate names.
Test Plan: Browsed web UI, grepped for changed constants, applied patch, inspected database.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14153
Summary:
Ref T9252. Leases currently have a `resourceID`, but this is a bit nonstandard and generally less flexible than giving them a `resourcePHID`.
In particular, a `resourcePHID` is easier to use when rendering interfaces, since you can get handles out of a PHID.
Add a PHID column, copy over all the PHIDs that correspond to existing IDs, then drop the ID column.
Test Plan:
- Browsed web UIs.
- Inspected database during/after migration.
- Grepped for `resourceID`.
- Allocated a new lease with `bin/drydock lease`.
Reviewers: chad, hach-que
Reviewed By: hach-que
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14151
Summary:
Ref T9464. If an ancient transaction doesn't have array values for whatever reason, we fail here.
Instead, just recover as gracefully as we can. We may get the transaction "wrong" in some sense, but this only impacts what is rendered in the transaction log.
Test Plan: This is nearly a year old and there's no real way to test it.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9464
Differential Revision: https://secure.phabricator.com/D14149
Summary:
Ref T9252. This simplifies some Drydock code.
Most of this code relates to the old notion of Drydock being able to enumerate all the tasks it needs to complete in order to acquire a lease. The code has stepped back from this, since it's unnecessary, the queue is more powerful than it used to be, and it would be a lot of work to keep track of.
The ~only thing that should ever wait for leases in modern code is `bin/drydock lease`, and it's fine for it to just sit there sleeping, so this just does that.
This reduces the granularity of logging, but I'll address that separately in future logging-focused changes.
Test Plan: Used `bin/drydock lease` to acquire a lease, saw it acquire cleanly.
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14147
Summary:
Ref T9252. Broadly, Drydock currently races on releasing objects from the "active" state. To reproduce this:
- Scatter some sleep()s pretty much anywhere in the release code.
- Release several times from web UI or CLI in quick succession.
Resources or leases will execute some release code twice or otherwise do inconsistent things.
(I didn't chase down a detailed reproduction scenario for this since inspection of the code makes it clear that there are no meaningful locks or mechanisms preventing this.)
Instead, add a Harbormaster-style command queue to resources and leases. When something wants to do a release, it adds a command to the queue and schedules a worker. The workers acquire a lock, then try to consume commands from the queue.
This guarantees that only one process is responsible for writes to active resource/leases.
This is the last major step to giving resources and leases a single writer during all states:
- Resource, Unsaved: AllocatorWorker
- Resource, Pending: ResourceWorker (Possible rename to "Allocated?")
- Resource, Open: This diff, ResourceUpdateWorker. (Likely rename to "Active").
- Resource, Closed/Broken: Future destruction worker. (Likely rename to "Released" / "Broken"; maybe remove "Broken").
- Resource, Destroyed: No writes.
- Lease, Unsaved: Whatever wants the lease.
- Lease, Pending: AllocatorWorker
- Lease, Acquired: LeaseWorker
- Lease, Active: This diff, LeaseUpdateWorker.
- Lease, Released/Broken: Future destruction worker (Maybe remove "Broken"?)
- Lease, Expired: No writes. (Likely rename to "Destroyed").
In most phases, we can already guarantee that there is a single writer without doing any extra work. This is more complicated in the "Active" case because the release buttons on the web UI, the release tools on the CLI, the lease requestor itself, the garbage collector, and any other release process cleaning up related objects may try to effect a release. All of these could race one another (and, in many cases, race other processes from other phases because all of these get to act immediately) as this code is currently written. Using a queue here lets us make sure there's only a single writer in this phase.
One thing which is notable is that whatever acquires a lease **can not write to it**! It is never the writer once it queues the lease for activation. It can not write to any resources, either. And, likewise, Blueprints can not write to resources while acquiring or releasing leases.
We may need to provide a mechinism so that blueprints and/or resource/lease holders get to attach some storage to resources/leases for bookkeeping. For example, a blueprint might need to keep some kind of cache on a resource to help it manage state. But I think we can cross that bridge when we come to it, and nothing else would need to write to this storage so it's technically straightforward to introduce such a mechanism if we need one.
Test Plan:
- Viewed buttons in web UI, checked enabled/disabled states.
- Clicked the buttons.
- Saw commands show up in the command queue.
- Saw some daemon stuff get scheduled.
- Ran CLI tools, saw commands get consumed and resources/leases release.
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14143
Summary:
See discussion in D10304. There's a lot of context there, but the general idea is:
- Blueprints should manage locks in a granular way during the actual allocation/acquisition phase.
- Optimistic "slot locks" might a pretty good primitive to make that easy to implement and reason about in most cases.
The way these locks work is that you just pick some name for the lock (like the PHID of a resource) and say that it needs to be acquired for the allocation/acquisition to work:
```
...
->needSlotLock("mylock(PHID-XYZQ-...)")
...
```
When you fire off the acquisition or allocation, it fails unless it could acquire the slot with that name. This is really simple (no explicit lock management) and a pretty good fit for most of the locking that blueprints and leases need to do.
If you need to do limit-based locks (e.g., maximum of 3 locks) you could acquire a lock like this:
```
mylock(whatever).slot(2)
```
Blueprints generally only contend with themselves, so it's normally OK for them to pick whatever strategy works best for them in naming locks.
This may not work as well if you have a huge number of slots (e.g., 100TB you want to give out in 1MB chunks), or other complex needs for locks (like you have to synchronize access to some external resource), but slot locks don't need to be the only mechanism that blueprints use. If they run into a problem that slot locks aren't a good fit for, they can use something else instead. For now, slot locks seem like a good fit for the problems we currently face and most of the problems I anticipate facing.
(The release workflows have other race issues which I'm not addressing here. They work fine if nothing races, but aren't race-safe.)
Test Plan:
To create a race where the same binding is allocated as a resource twice:
- Add `sleep(10)` near the beginning of `allocateResource()`, after the free bindings are loaded but before resources are allocated.
- (Comment out slot lock acquisition if you have this patch.)
- Run `bin/drydock lease ...` in two windows, within 10 seconds of one another.
This will reliably double-allocate the binding because both blueprints see a view of the world where the binding is free.
To verify the lock works, un-comment it (or apply this patch) and run the same test again. Now, the lock fails in one process and only one resource is allocated.
Reviewers: hach-que, chad
Reviewed By: hach-que, chad
Differential Revision: https://secure.phabricator.com/D14118
Summary: Fixes T9351. This is straightforward since this application is now relatively modern and doesn't have any bizarre craziness.
Test Plan:
{F787981}
{F787982}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9351
Differential Revision: https://secure.phabricator.com/D14093
Summary:
One of the migrations in rPa335004a91 (`20150730.herald.5.sql`) incorrectly swapped "add" and "add blocking" Differential Herald rules.
Swap any rules last modified before this patch was applied back. This is the best we can do without possibly overwriting more recent, intentional data. I'll issue some guidance on this in the changelog.
Test Plan:
- Made a rule, ran patch, no change.
- Changed rule modified time to a few months ago, ran patch, saw swap from non-blocking to blocking.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14061
Summary: Adds an additional field for questions, an answer wiki, should should usually be community editable.
Test Plan: New question, edit question, no wiki, lots of wiki.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14003
Summary: Until we have a proper close as duplicate workflow for Ponder, remove the option with something more sensible.
Test Plan: Closed a question as invalid, saw it closed and in feed.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14007
Summary:
Ref T8783. Sort out some relationships and fields:
- Make Items 1:1 with Queues: each item is always in exactly one queue. Minor discussion on T8783. I think this is easier to understand and reason about (and implement!) and can't come up with any real cases where it isn't powerful enough.
- Remove "QueueItem", which allowed items to be in multiple queues at once.
- Remove "dateNuanced", which is equivalent to "dateCreated" in all cases.
Then add really basic routing:
- Add "Default Queue" for Sources. New items from the source route into that queue.
- (Some day there will be routing rules, but for now the rule is "always route into the default queue".)
- Show queue on items.
- Show more / more useful edit history and transactions in several UIs.
Test Plan:
{F749445}
{F749446}
{F749447}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8783
Differential Revision: https://secure.phabricator.com/D13988
Summary: Fixes T8428. Adds status to packages, allows setting and application search. I presume though these need checked elsewhere?
Test Plan: New package, edit package, archive package, run search queries.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T8428
Differential Revision: https://secure.phabricator.com/D13925
Summary:
Ref T8659. In the general case, this eventually allows build processes to do things like:
- Upload build results (like a ".app" or ".exe" or other binary).
- Pass complex results between build steps (e.g., build step A does something hard and build step B uses it to do something else).
Today, we're a long way away from having the infrastructure for that. However, it is useful to let third party build processes (like Jenkins) upload URIs that link back to the external build results.
This adds `harbormaster.createartifact` so they can do that. The only useful thing to do with this method today is have your Jenkins build do this:
params = array(
"uri": "https://jenkins.mycompany.com/build/23923/details/",
"name": "View Build Results in Jenkins",
"ui.external": true,
);
harbormaster.createartifact(target, 'uri', params);
Then (after the next diff) we'll show a link in Differential and a prominent link in Harbormaster. I didn't actually do the UI stuff in this diff since it's already pretty big.
This change moves a lot of code around, too:
- Adds PHIDs to artifacts.
- It modularizes build artifact types (currently "file", "host" and "URI").
- It formalizes build artifact parameters and construction:
- This lets me generate usable documentation about how to create artifacts.
- This prevents users from doing dangerous or policy-violating things.
- It does some other general modernization.
Test Plan:
{F715633}
{F715634}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8659
Differential Revision: https://secure.phabricator.com/D13900
Summary: Ref T9173, adds basic hide support for answers. Answer authors and Moderators can hide answers, unhide them.
Test Plan: Hide answer, log into other account, see hidden message. Mark as visible, see answer again.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9173
Differential Revision: https://secure.phabricator.com/D13894
Summary: Ref T6920, This removes the PonderVotableInterface from PonderQuestion and assocaited code. Also... never used?
Test Plan: Visit Ponder, See List, New Question, Add Answer.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T6920
Differential Revision: https://secure.phabricator.com/D13833
Summary: This allows installs to essentially set a "moderator" for Ponder, who can clean up answers. Fixes T9098
Test Plan: Edit an answer I don't own.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9098
Differential Revision: https://secure.phabricator.com/D13818
Summary: This fails to apply on my second sandbox with incorrect DOUBLE value. Reran SQL, works as expected.
Test Plan: Rerun new SQL on ponder_question table
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D13830
Summary: Ref T9096. This is a first cut at adding additional statuses, happy to add or subtract as needed... maybe even configurable? Also, the dialog doesn't seem to fire, I'll keep debugging.
Test Plan: Close and Reopen many questions. Test applicationSearch params by seeing resolved questions, all questions.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9096
Differential Revision: https://secure.phabricator.com/D13826
Summary: Ref T9076, adds basic plumbing for setting the state of a Paste.
Test Plan: Archive Paste, Activate Paste, New Paste
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9076
Differential Revision: https://secure.phabricator.com/D13801
Summary: Ref T8493, Ref T3578. Adds spaces support to ponder.
Test Plan: Ask a question in a new space, see new question.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T3578, T8493
Differential Revision: https://secure.phabricator.com/D13792
Summary: Ref T3578, adds ability to set a default edit and view policy for questions. Not sure what to set viewPolicy to ?
Test Plan: Test an old question, edit policy still on myself. Test a new question, see new default.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T3578
Differential Revision: https://secure.phabricator.com/D13791
Summary: Ref T3846. Adds mailkey generation and migration.
Test Plan: Ran the migration, see keys in mysql.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T3846
Differential Revision: https://secure.phabricator.com/D13785
