Summary:
Ref T13589. In D21510, not every ref selector got touched, and this isn't a valid construction in Git:
```
$ git ls-tree ... -- ''
```
Thus:
- Disambiguate more (all?) ref selectors.
- Correct the construction of "git ls-tree" when there is no path.
- Clean some stuff up: make the construction of some flags and arguments more explicit, get rid of a needless "%C", prefer "%Ls" over acrobatics, etc.
Test Plan: Browsed/updated a local Git repository. (This change is somewhat difficult to test exhaustively, as evidenced by the "ls-tree" issue in D21510.)
Maniphest Tasks: T13589
Differential Revision: https://secure.phabricator.com/D21511
Summary: Ref T13589. See that task for discussion.
Test Plan: Executed most commands via "bin/conduit" or in isolation.
Maniphest Tasks: T13589
Differential Revision: https://secure.phabricator.com/D21510
Summary:
Changes the heuristic method by which non-zero exit statuses from git-http-backend are found to be due to packfile negotiation during shallow fetches, etc.
Instead of checking git-http-backend stderr for a generic "hung up" error message, see if the pack-result response contains a terminating flush packet ("0000"). This should give a greater assurance that the request was handled correctly and the response is complete.
Test Plan: Run `GIT_CURL_VERBOSE=1 git fetch --depth 1 https://host.example/source/repo.git HEAD` to ensure it completes and includes two successful POST requests during packfile negotiation (the last one actually receives the packfile).
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, dzduvall
Tags: #diffusion
Differential Revision: https://secure.phabricator.com/D21484
Summary:
Ref T13552. The behavior of "RepositoryQuery" with ambiguous identifiers under "withRepositoryPHIDs()" is tricky. This leads to failure to load commits in Subversion in some cases.
Use "withRepository()", which gives us the correct identifier resolution behavior.
Test Plan: Viewed a subversion repository history in Diffusion, saw commit details after change.
Maniphest Tasks: T13552
Differential Revision: https://secure.phabricator.com/D21469
Summary:
Ref T13552. Turn "CommitData" into an application-level layer on top of the repository-level "CommitRef" object.
For older commits which will not have a "CommitRef" record on disk, build a synthetic one at runtime. This could eventually be migrated.
Test Plan: Ran "bin/repository reparse --message", browsed Diffusion.
Maniphest Tasks: T13552
Differential Revision: https://secure.phabricator.com/D21449
Summary: Ref T13552. Currently, various callers read raw properties off "CommitData" directly. Wrap these in accessors to support storage changes which persist "CommitRef" information instead.
Test Plan:
- Ran "diffusion.querycommits", saw the same data before and after.
- Looked at a commit, saw authorship information and date.
- Viewed tags in a repository, saw author information.
- Ran "rebuild-identities", saw no net effect.
- Grepped for callers to "getCommitDetail(...)".
Maniphest Tasks: T13552
Differential Revision: https://secure.phabricator.com/D21448
Summary: Ref T13552. The internal caller for this now uses "internal.commit.search", which is always authority-reading. No legitimate external caller should rely on the behavior of "bypassCache"; no-op it to simplify behavior.
Test Plan: Called "diffusion.querycommits", saw the same data as before.
Maniphest Tasks: T13552
Differential Revision: https://secure.phabricator.com/D21447
Summary: Ref T13552. Swap the call we're using to build "CommitRef" objects here to the recently-introduced "internal.commit.search" method.
Test Plan: Used "bin/repository reparse --message ..." to reparse commits, added "var_dump()" to inspect results. Saw sensible CommitRef and CommitData objects get built.
Maniphest Tasks: T13552
Differential Revision: https://secure.phabricator.com/D21446
Summary:
Ref T13552. Commit parsers currently invoke a special mode of "diffusion.querycommits", which is an older frozen method.
The replacement, "diffusion.commit.search", is not really appropriate for low-level access. This mode of having a single method which operates in "cache" or "non-cache" modes also ends up in a lot of unnecessary field shuffling.
Provide "internal.commit.search" as a modern equivalent that returns a "DiffusionCommitRef"-compatible structure.
Test Plan: Executed "internal.commit.search", got sensible low-level commit results.
Maniphest Tasks: T13552
Differential Revision: https://secure.phabricator.com/D21443
Summary:
Ref T13552. Some Diffusion conduit calls may only be served by a node which hosts a working copy on disk, so they're proxied if received by a different node.
This capability is currently bound tightly to "DiffusionRequest", which is a bundle of context parameters used by some Diffusion calls. However, call proxying is not fundamentally a Diffusion behavior.
I want to perform proxying on a "*.search" call which does not use the "DiffusionRequest" parameter bundle. Lift proxying to the root level of Conduit.
Test Plan: Browsed diffusion in a clusterized repsository.
Maniphest Tasks: T13552
Differential Revision: https://secure.phabricator.com/D21442
Summary: Ref T13552. Provide a richer handle/status list item for commit lists.
Test Plan: Viewed commits in various interfaces, saw richer information.
Maniphest Tasks: T13552
Differential Revision: https://secure.phabricator.com/D21431
Summary:
Ref T13552. Build the "commit list" elements so that the menu action items collapse under the element on mobile.
Also change the mobile breakpoint to 512px because my Safari window can't go any narrower than 508px. Future changes to responsive design will be more content-aware anyway.
Test Plan: Looked at commits in various interfaces, at desktop and mobile widths.
Maniphest Tasks: T13552
Differential Revision: https://secure.phabricator.com/D21430
Summary:
Ref T13552. The current layout doesn't work particularly well on desktops or devices.
We have some device/desktop table layout code, but it isn't generic. We also have property list layout code, but it isn't generic either.
Provide generic layout elements ("Fuel", from "Phabricator UI Layout" to "PHUIL"?) and narrowly specialize their display behavior. Then swap the ListItemView stuff to use it.
Test Plan:
Saw slightly better responsive behavior:
{F7637457}
Maniphest Tasks: T13552
Differential Revision: https://secure.phabricator.com/D21418
Summary:
Ref T13552. In unifying the various Graph/List/Table commit views, some information was dropped -- particularly, audit status.
Restore most of it. The result isn't very pretty, but has most of the required information.
Test Plan: {F7637411}
Maniphest Tasks: T13552
Differential Revision: https://secure.phabricator.com/D21417
Summary: Ref T13552. Some of the CSS can be removed or simplified now that essentially all lists of commits are on a single rendering pathway.
Test Plan: Grepped for affected CSS, viewed commit graph.
Maniphest Tasks: T13552
Differential Revision: https://secure.phabricator.com/D21416
Summary:
Ref T13552.
Currently, the "Browse" page shows a snippet of unmerged changes if you're looking at a non-default branch. Remove this for consistency with the simplified main "Browse" page. This is reachable via "Compare".
Update the "Compare" page to use the new "CommitGraphView".
Test Plan:
- Looked at the "Browse" page of "stable".
- Looked at the "Compare" page for "stable vs master".
Maniphest Tasks: T13552
Differential Revision: https://secure.phabricator.com/D21414
Summary: Ref T13552. When viewing a merge commit, merged changes are currently shown inline. Update this view to use the new "GraphView" rendering pipeline.
Test Plan:
- Viewed a merge commit, saw merges.
- Viewed history, profile page, etc.
Maniphest Tasks: T13552
Differential Revision: https://secure.phabricator.com/D21413
Summary:
Ref T13552. This older view mostly duplicates other code and has only two callsites:
- The "Commits" section of user profile pages.
- The "Ambiguous Hash" page when you visit a commit hash page which is an ambiguous prefix of two or more commit hashes.
Replace both with "DiffusionCommitGraphView".
Test Plan:
- Visited profile page, clicked "Commits".
- Visited an ambiguous hash page (`rPbd3c23`).
Maniphest Tasks: T13552
Differential Revision: https://secure.phabricator.com/D21412
Summary: Ref T13552. In the new combined "table/list" graph view, tidy up the graph rendering.
Test Plan: {F7633504}
Maniphest Tasks: T13552
Differential Revision: https://secure.phabricator.com/D21411
Summary:
Ref T13552. Currently, commit lists are sometimes rendered as an object list and sometimes rendered as a table. There are two separate views for table rendering.
Add a fourth view ("list, with a graph") with the eventual intent of unifying all the other views. For now, this only replaces "HistoryListView" -- and needs some more work to really be a convincing replacement.
Test Plan:
- Looked at "History" in Diffusion, saw an ugly view with all the information we want.
- Grepped for "HistoryListView", no hits.
Maniphest Tasks: T13552
Differential Revision: https://secure.phabricator.com/D21410
Summary:
Ref T13552. Currently, Diffusion has two effectively identical history views, the "Graph" view and the "History" view.
These arose out of product uncertainty about the importance of the graph, but I think we can just put the graph on the "object item list" view and merge these views.
Test Plan: Looked at repositories in Diffusion, no longer saw a "Graph" tab. Grepped for "graph"-related symbols.
Maniphest Tasks: T13552
Differential Revision: https://secure.phabricator.com/D21409
Summary:
Ref T13552. Currently, the repository landing page has a panel with recent commits. This is accessible by clicking "History" and usually below the fold, so it's not clearly useful.
Since I'm consolidating this code anyway to fix an issue with the import pipeline, just get rid of this history view.
Test Plan: Viewed a repository landing page, no longer saw a history panel.
Maniphest Tasks: T13552
Differential Revision: https://secure.phabricator.com/D21408
Summary: Ref T13552. This older class has no callers; tag and branch listings were replaced with an "ObjectList" view.
Test Plan: Grepped for "DiffusionTagTableView", got no hits.
Maniphest Tasks: T13552
Differential Revision: https://secure.phabricator.com/D21407
Summary:
Ref T13552. I'm trying to reduce the number of direct callers to commit authorship metadata. This header seems low-value enough to simply remove; this information is shown more clearly and prominently in the "Provenance" UI.
In particular, commits have multiple dates (authored, committed, pushed) but this header shows only one. It currently shows the author identity and the commit date, which isn't entirely correct. And it potentially uses an "Identity" as a timeline actor, which is conceptually fine but not entirely firm ground.
Test Plan: Viewed a commit, saw no more subheader.
Maniphest Tasks: T13552
Differential Revision: https://secure.phabricator.com/D21406
Summary:
Ref T13552. Give "Commit" objects a more modern, identity-aware way to render author and committer information.
This uses handles in a more modern way and gives us a single read callsite for raw author and committer names.
Test Plan:
- Grepped for callers to the old methods, found none. (There are a lot of "renderAuthor()" callers in transactions, but this call takes no parameters.)
- Viewed some commits, saw sensible lists of authors and committers.
Maniphest Tasks: T13552
Differential Revision: https://secure.phabricator.com/D21405
Summary:
Ref T13552. When viewing a directory in Diffusion, we make an Ajax call to get the last commit for each path.
This call currently pulls author information, since an older version of this UI showed author information.
The current UI does not show author information, so this parameter is unused. Delete the code which builds it.
Test Plan: Grepped for `'author'` and references to the "pull-lastmodified" behavior. This behavior is invoked in only one place, which never generates an author placeholder.
Maniphest Tasks: T13552
Differential Revision: https://secure.phabricator.com/D21404
Summary:
Modern Mercurial may emit some more patterns under "--debug".
This whole list is gross and can likely now be eliminated by increasing the minimum required Mercurial version (as `arc` has), but just paper over it for now.
Test Plan:
Locally, saw some views return to functional behavior that weren't previously working on a modern version of Mercurial.
The reproduction case is likely something in the vein of "repository is not writable by webserver, look at history view".
Differential Revision: https://secure.phabricator.com/D21398
Summary:
Ref T13541. The passthru future does not have time limit behavior, so if we reach this code we currently fail.
Phabricator never reaches this code normally, but this code is reachable during debugging if you try to foreground a slow fetch to inspect it.
Passthru commands generally only make sense to run interactively, and the caller or control script can enforce their own timeouts (usually by pressing "^C" with their fingers).
Test Plan: Used a debugging script to run ref-by-ref fetches in the foreground.
Maniphest Tasks: T13541
Differential Revision: https://secure.phabricator.com/D21284
Summary: Ref T13513. Inline comment context information is somewhat expensive to construct and can be cached. Add a readthrough cache on top of it.
Test Plan: Loaded a source code changeset with many inline comments, used Darkconsole to inspect query activity. Saw caches get populated. Updated cache key, saw caches regenerate. Browsed Diffusion, nothing looked broken.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21279
Summary: Ref T13513. For now, I'm not supporting inline edit suggestions in Diffusion, although it's likely not difficult to do so in the future. Clean up some of the code so that plain ol' inlines work the same way they did before.
Test Plan:
- Created, edited, reloaded, submitted inlines in Diffusion: familiar old behavior.
- Created, edited, reloaded, submitted inlines with suggestions in Differential: familiar new behavior.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21278
Summary:
Ref T13513. If your 10 most recently authored inlines have all been deleted, these queries can fail by overheating. This is silly and probably rarely happens outside of development.
For now, just let them overheat. This may create a false negative (incorrect "no draft" signal when the real condition is "drafts, but 10 most recent comments were deleted"). This could be sorted out later with a query mode like "executeAny()", perhaps.
Test Plan:
- Created and deleted 10 inlines.
- Submitted comments.
- Before: overheating fatal during draft flag generation.
- After: clean submission.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21274
Summary:
Ref T13513. Currently, if you:
- click a line to create an inline;
- type some text;
- wait a moment; and
- close the page.
...you don't get an "Unsubmitted Draft" marker in the revision list.
Lift all the draft behavior to "InlineController" and make saving a draft dirty the overall container draft state.
Test Plan:
- Took the steps described above, got a draft state marker.
- Created, edited, submitted, etc., inlines in Diffusion and Differential.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21235
Summary: Ref T13513. All queries now go through a reasonably minimal set of pathways and should have consistent behavior.
Test Plan:
- Loaded a revision with inlines.
- Created a new empty inline, reloaded page, saw it vanish.
- Created a new empty inline, typed draft text, did not save, reloaded page, saw draft present.
- Created a new empty inline, typed draft text. Submitted feedback, got prompt, answered "Y", saw draft text submit.
- Created a new empty inline, typed draft text, scrolled down to bottom of page, typed non-draft text, saw preview include draft text.
- Marked and submitted "Done".
- Used hide/show on inlines, verified state persisted.
- Did much of the same stuff in Diffusion, where it all works the same way (except: there's no prompt when submitting draft is-editing inlines).
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21234
Summary: Ref T13513. Replaces "DifferentialInlineCommentQuery" with the similar but more modern "DifferentialDiffInlineCommentQuery".
Test Plan: Viewed comments in timeline, changesets. Created, edited, and submitted comments. Hid and un-hid comments, reloading (saw state preserved).
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21233
Summary: Ref T13513. Continue removing usage sites for the obsolete "DifferentialInlineCommentQuery".
Test Plan: Viewed the inline list in Differential, saw sensible inlines.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21232
Summary: Ref T13513. Move querying to "DiffInlineCommentQuery" classes and lift them into the base Controller.
Test Plan: In Differential and Diffusion, created, edited, and submitted inline comments.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21231
Summary: Ref T13513. Another step closer to the light.
Test Plan: Created, edited, deleted, replied to, and submitted inline comments in Diffusion.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21230
Summary: Ref T13513. Continue marching toward coherent query pathways for all access to inline comments.
Test Plan:
- Viewed a commit and a path within that commit, as a user with unpublished inlines and a different user.
- Saw appropriate inlines in all cases (published inlines, plus undeleted unpublished inlines authored by the current viewer).
- Grepped for "loadDraftAndPublishedComments()".
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21228
Summary:
Ref T13513. Improve consistency and robustness of the "InlineComment" queries.
The only real change here is that these queries now implicitly add a clause for selecting inlines ("pathID IS NULL" or "changesetID IS NULL").
Test Plan: Browed, created, edited, and submitted inlines.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21227
Summary: Ref T13513. This controller was obsoleted by EditEngine and appears unreachable without explicitly typing the URL.
Test Plan:
- Grepped for the route, didn't find any hits.
- Deleted the controller, successfully previewed comments in Diffusion.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21224
Summary:
Ref T13513. This is mostly an infrastructure cleanup change.
In a perfect world, this would be a series of several changes, but they're tightly interconnected and don't have an obvious clean, nontrivial partition (or, at least, I don't see one). Followup changes will exercise this code repeatedly and all of these individual mutations are "obviously good", so I'm not too worried about the breadth of this change.
---
Inline comments are stored as transaction comments in the `PhabricatorAuditTransactionComment` and `DifferentialTransactionComment` classes.
On top of these two storage classes sit `PhabricatorAuditInlineComment` and `DifferentialInlineComment`. Historically, these were an indirection layer over significantly different storage classes, but nowadays both storage classes look pretty similar and most of the logic is actually the same. Prior to this change, these two classes were about 80% copy/pastes of one another.
Part of the reason they're so copy/pastey is that they implement a parent `Interface`. They are the only classes which implement this interface, and the interface does not provide any correctness guarantees (the storage objects are not actually constrained by it).
To simplify this:
- Make `PhabricatorInlineCommentInterface` an abstract base class instead.
- Lift as much code out of the `Audit` and `Differential` subclasses as possible.
- Delete methods which no longer have callers, or have only trivial callers.
---
Inline comments have two `View` rendering classes, `DetailView` and `EditView`. They share very little code.
Partly, this is because `EditView` does not take an `$inline` object. Historically, it needed to be able to operate on inlines that did not have an ID yet, and even further back in history this was probably just an outgrowth of a simple `<form />`.
These classes can be significantly simplified by passing an `$inline` to the `EditView`, instead of individually setting all the properties on the `View` itself. This allows the `DetailView` and `EditView` classes to share a lot of code.
The `EditView` can not fully render its content. Move the content rendering code into the view.
---
Prior to this change, some operations need to work on inlines that don't have an inline ID yet (we assign an ID the first time you "Save" a comment). Since "editing" comments will now be saved, we can instead create a row immediately.
This means that all the inline code can always rely on having a valid ID to work with, even if that ID corresponds to an empty, draft, "isEditing" comment. This simplifies more code in `EditView` and allows the "create" and "reply" code to be merged in `PhabricatorInlineCommentController`.
---
Client-side inline events are currently handled through a mixture of `ChangesetList` listeners (good) and ad-hoc row-level listeners (less good). In particular, the "save", "cancel", and "undo" events are row-level. All other events are list-level.
Move all events to list-level. This is supported by all inlines now having an ID at all stages of their lifecycle.
This allows some of the client behavior to be simplified. It currently depends on binding complex ad-hoc dictionaries into event handlers in `_drawRows()`, but it seems like almost all of this code can be removed. In fact, no more than one row ever seems to be drawn, so this code can probably be simplified further.
---
Finally, save an "isEditing" state. When we rebuild a revision on the client, click the "edit" button if it's in this state. This is a little hacky, but simpler to get into a stable state, since the row layout of an inline depends on a "view row" followed by an "edit row".
Test Plan:
- Created comments on either side of a diff.
- Edited a comment, reloaded, saw edit stick.
- Saved comments, reloaded, saw save stick.
- Edited a comment, typed text, cancelled, "unedited" to get state back.
- Created a comment, typed text, cancelled, "unedited" to get state back.
- Deleted a comment, "undeleted" to get state back.
Weirdness / known issues:
- Drafts don't autosave yet.
- Fixed in D21187:
- When you create an empty comment then reload, you get an empty editor. This is a bit silly.
- "Cancel" does not save state, but should, once drafts autosave.
- Mostly fixed in D21188:
- "Editing" comments aren't handled specially by the overall submission flow.
- "Editing" comments submitted in that state try to edit themselves again on load, which doesn't work.
Subscribers: jmeador
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21186
Summary:
Ref T13455. Make "hidden" a changeset property similar to other changeset properties.
We don't need to render this on the server, so we make a request (to update the setting) and just discard the response.
Test Plan: {F7375468}
Maniphest Tasks: T13455
Differential Revision: https://secure.phabricator.com/D21158
Summary:
Ref T13516. Deletes all old filetree / flex / active / collapse nav code in favor of the new code.
Restores the inline tips in the path tree.
Test Plan: {F7374175}
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21154
Summary:
Ref T13515. This restores the "Open in Editor" behavior to Diffusion, and makes "\" work there.
The URI pattern is now sent as a structured template to the client, so the code will work properly if a file path contains "%l".
Test Plan:
- Clicked "Open in Editor" and pressed "\" in Diffusion when viewing a file.
- Clicked a line, hit "\", got the file opened to that line.
Maniphest Tasks: T13515
Differential Revision: https://secure.phabricator.com/D21149
Summary:
Ref T13515. Currently, opening a file to a particular line in an external editor relies on replacing "%l" with "%l" (which is escaped as "%25l") on the server, and then replacing "%25l" with the line number on the client. This will fail if the file path (or any other variable) contains "%l" in its unencoded form.
The parser also can't identify invalid variables.
Pull the parser out, formalize it, and make it generate an intermediate representation which can be sent to the client and reconstituted.
(This temporarily breaks Diffusion and permanently removes the weird, ancient integration in Dark Console.)
Test Plan:
- Added a bunch of tests for the actual parser.
- Used "Open in Editor" in Differential.
Maniphest Tasks: T13515
Differential Revision: https://secure.phabricator.com/D21143
Summary:
Ref T13455. Update the other "view state" properties to work like "highlight" now works.
Some complexity here arises from these concerns:
- In "View Standalone", we render the changeset inline. This is useful for debugging/development, and desirable to retain.
- In all other cases, we render the changeset with AJAX.
So the client needs to be able to learn about the "state" properties of the changeset on two different flows. Prior to this change, each pathway had a fair amount of unique code.
Then, some bookkeeping issues:
- At inital rendering time, we may not know which renderer will be selected: it may be based on the client viewport dimensions.
- Prior to this change, the client didn't separate "value of the property for the changeset as rendered" and "desired value of the property".
Test Plan:
- Viewed changes in Differential, Diffusion, and in standalone mode.
- Toggled renderer, character sets, and document engine (this one isn't terribly useful). Reloaded, saw them stick.
- Started typing a comment, cancelled it, hit the undo UI.
Maniphest Tasks: T13455
Differential Revision: https://secure.phabricator.com/D21138
Summary:
Ref T13455. Add container-level storage for persistent view state, and persist "Highlight As..." inside it.
The storage generates a "PhabricatorChangesetViewState" configuration object as an output.
When preferences are expressed on a diff and that diff is later attached to a revision, we attempt to copy the preferences.
The internal storage tracks per-changeset settings, but currently always uses "last update wins" to apply the settings in the UI.
Test Plan:
- Viewed revisions, changed highlighting, reloaded. Saw highlighting stick in revision view and standalone view.
- Viewed commits, changed highlighting, reloaded. Saw highlighting stick.
- Created a diff, changed highlighting, turned it into a revision, saw highlighting persist.
Subscribers: jmeador, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13455
Differential Revision: https://secure.phabricator.com/D21137
