Summary:
Ref T11589. When we hit a fatal setup issue (essentially always a connection failure) //after// we've already survived them on at least one request, we can be pretty sure a server went down and that the problem is not a setup/configuration issue.
In this case, show a friendlier error page instead of the fairly detailed technical one.
Test Plan:
- Broke MySQL config.
- Restarted Apache.
- Got the "admin/setup" error page:
{F1803268}
- Fixed the MySQL config.
- Loaded any page, to put us "in flight".
- Broke MySQL config.
- Loaded any page.
- Got the friendly "in flight" error page:
{F1803271}
If you want to design this better, easiest way to get to it is:
- Set `mysql.port` to `9999` in `conf/local/local.json`.
- Reload any page while already running (don't restart).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11589
Differential Revision: https://secure.phabricator.com/D16503
Summary: Ref T11589. Provide a way for scripts to say "just continue if database config fails", and use it in `bin/config` and `bin/storage`.
Test Plan:
- Broke database config.
- Ran `bin/config`, worked fine.
- Ran `bin/storage`, got helpful "set up the database" message.
- Ran `bin/repository`, got fatal.
- Ran normal site with valid/invalid config, got proper feedback.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11589
Differential Revision: https://secure.phabricator.com/D16502
Summary:
Ref T11589. Previously, when we failed to load database configuration we just continued anyway, in order to get to setup checks so we could raise a better error.
There was a small chance that this could lead to pages running in a broken state, where ONLY that connection failed and everything else worked. This was accidentally fixed by narrowing the exceptions we continue on in D16489.
However, this "fix" meant that users no longer got helpful setup instructions. Instead:
- Keep throwing these exceptions: it's bad to continue if we've failed to connect to the database.
- However, catch them and turn them into setup errors.
- Share all the setup code so these errors and setup check errors work the same way.
Test Plan:
- Intentionally broke `mysql.host` and `mysql.pass`.
- Loaded pages.
- Got good setup errors.
- Hit normal setup errors too.
- Put everything back.
- Swapped into cluster mode.
- Intentionally broke cluster mode, saw failover to readonly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11589
Differential Revision: https://secure.phabricator.com/D16501
Summary:
Ref T11589. This runs:
- preflight checks (critical checks: PHP version stuff, extensions);
- configuration;
- normal checks.
The PHP checks are split into critical ("bad version") and noncritical ("sub-optimal config").
I tidied up the extension checks slightly, we realistically depend on `cURL` nowadays.
Test Plan:
- Faked a preflight failure.
- Hit preflight check.
- Got expected error screen.
- Loaded normal pages.
- Hit a normal setup check.
- Used DarkConsole "Startup" tab to verify that preflight checks take <1ms to run (we run them on every page without caching, at least for now, but they only do trivial checks like PHP versions).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11589
Differential Revision: https://secure.phabricator.com/D16500
Summary:
Ref T11596. When exporting data from the Phacility cluster, we `bin/files migrate` data from S3 into a database dump on the `aux` tier.
With current semantics, this //moves// the data and destroys it in S3.
Add a `--copy` flag to //copy// the data instead. This leaves the old copy around, which is what we want for exports.
Test Plan:
- Ran `bin/files migrate` to go from `blob` to `disk` with `--copy`. Verified a copy was left in the database.
- Copied it back, verified a copy was left on disk (total: 2 database copies, 1 disk copy).
- Moved it back without copy, verified database was destroyed and disk was created (total: 1 database copy, 2 disk copies).
- Moved it back without copy, verified local disk was destroyed and blob was created (total: 2 datbabase copies, 1 disk copy).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11596
Differential Revision: https://secure.phabricator.com/D16497
Summary:
Ref T11589. Currently, initialization order is a bit tangled: we load configuration from the database, then later test if we can connect to the database.
Instead, I'm going to do: preflight checks ("PHP Version OK?", "Extensions installed?"), then configuration, then normal setup checks.
To prepare for this, flag core checks as "preflight" and add a setup panel to visually confirm that I didn't miss anything.
Test Plan: {F1803210}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11589
Differential Revision: https://secure.phabricator.com/D16499
Summary: Caught one of these while reviewing docs, grepped for the other one.
Test Plan: `grep`, reading
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D16498
Summary: For phabricator. Adds a Slack auth adapater and icon.
Test Plan:
Create a new Slack Application for login, generate id and secret. Activate login and registration for Slack. Create a new account with Slack credentials. Log out. Log in with Slack credentials. Set my avatar with Slack. Slack. Slack.
{F1802649}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16496
If the namespace is something like "test_example" we currently fail to
renamespace the dump.
(Cowboy committing this since this is currently blocking a data export.)
Test Plan:
- Renamespaced a local dump, examined the output, saw 60 create / 60 use, reimported it.
- Will export in production.
Auditors: chad
Summary:
Two minor issues that I caught in the log while fixing Phame permissions:
- We had a JS bug which would cause us to immediately generate two comment previews at the exact same time -- one for loading the page, and one for "switching to desktop". Instead, only generate the "switch to desktop" preview if we really switched to desktop from a different device layout.
- These two requests could end up reading/writing the VersionedDraft table at exactly the same time fairly often (e.g., after a comment submission, the page would load, send two preview requests at exactly the same time, and they'd race fairly reliably for me locally). If we do race, recover from the race.
Test Plan:
Submitted some Phame comments.
- No more error log errors about VersionedDraft keys.
- Saw only one preview request when loading the page instead of two.
Here's the specific stack trace I caught:
```
[Mon Sep 05 12:15:33.639930 2016] [:error] [pid 50608] [client 127.0.0.1:55278] [2016-09-05 14:15:33] EXCEPTION: (AphrontDuplicateKeyQueryException) #1062: Duplicate entry 'PHID-POST-fknnpzjnsdgc3rqobhst-PHID-USER-pr5rjpuilpfserepsd2k-13' for key 'key_object' at [<phutil>/src/aphront/storage/connection/mysql/AphrontBaseMySQLDatabaseConnection.php:314]
[Mon Sep 05 12:15:33.640801 2016] [:error] [pid 50608] [client 127.0.0.1:55278] arcanist(head=master, ref.master=9e82ef979e81), corgi(head=master, ref.master=5b9171222bc9), instances(head=stable, ref.master=485bc8128198, ref.stable=2983bc917601), ledger(head=master, ref.master=4da4a24b8779), libcore(), phabricator(head=phame2, ref.master=4b6da9735ba7, ref.phame2=4b6da9735ba7), phutil(head=stable, ref.master=97f05269fdb1, ref.stable=c14343ee620e), services(head=stable, ref.master=1fcb5cdb7582, ref.stable=2d8088a5b4b3)
[Mon Sep 05 12:15:33.640815 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #0 <#2> AphrontBaseMySQLDatabaseConnection::throwCommonException(integer, string) called at [<phutil>/src/aphront/storage/connection/mysql/AphrontBaseMySQLDatabaseConnection.php:348]
[Mon Sep 05 12:15:33.640830 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #1 <#2> AphrontBaseMySQLDatabaseConnection::throwQueryCodeException(integer, string) called at [<phutil>/src/aphront/storage/connection/mysql/AphrontBaseMySQLDatabaseConnection.php:289]
[Mon Sep 05 12:15:33.640833 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #2 <#2> AphrontBaseMySQLDatabaseConnection::throwQueryException(mysqli) called at [<phutil>/src/aphront/storage/connection/mysql/AphrontBaseMySQLDatabaseConnection.php:185]
[Mon Sep 05 12:15:33.640836 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #3 <#2> AphrontBaseMySQLDatabaseConnection::executeRawQuery(string) called at [<phutil>/src/xsprintf/queryfx.php:8]
[Mon Sep 05 12:15:33.640839 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #4 <#2> queryfx(AphrontMySQLiDatabaseConnection, string, string, string, array, string)
[Mon Sep 05 12:15:33.640841 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #5 <#2> call_user_func_array(string, array) called at [<phutil>/src/aphront/storage/connection/AphrontDatabaseConnection.php:42]
[Mon Sep 05 12:15:33.640844 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #6 <#2> AphrontDatabaseConnection::query(string, string, string, array, string) called at [<phabricator>/src/infrastructure/storage/lisk/LiskDAO.php:1261]
[Mon Sep 05 12:15:33.640846 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #7 <#2> LiskDAO::insertRecordIntoDatabase(string) called at [<phabricator>/src/infrastructure/storage/lisk/LiskDAO.php:1106]
[Mon Sep 05 12:15:33.640849 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #8 <#2> LiskDAO::insert() called at [<phabricator>/src/infrastructure/storage/lisk/LiskDAO.php:1075]
[Mon Sep 05 12:15:33.640851 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #9 <#2> LiskDAO::save() called at [<phabricator>/src/applications/draft/storage/PhabricatorVersionedDraft.php:65]
[Mon Sep 05 12:15:33.640854 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #10 <#2> PhabricatorVersionedDraft::loadOrCreateDraft(string, string, integer) called at [<phabricator>/src/applications/transactions/editengine/PhabricatorEditEngine.php:1669]
[Mon Sep 05 12:15:33.640857 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #11 <#2> PhabricatorEditEngine::buildCommentResponse(PhamePost) called at [<phabricator>/src/applications/transactions/editengine/PhabricatorEditEngine.php:894]
[Mon Sep 05 12:15:33.640859 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #12 <#2> PhabricatorEditEngine::buildResponse() called at [<phabricator>/src/applications/phame/controller/post/PhamePostEditController.php:60]
[Mon Sep 05 12:15:33.640862 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #13 <#2> PhamePostEditController::handleRequest(AphrontRequest) called at [<phabricator>/src/aphront/configuration/AphrontApplicationConfiguration.php:237]
[Mon Sep 05 12:15:33.640865 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #14 phlog(AphrontDuplicateKeyQueryException) called at [<phabricator>/src/aphront/handler/PhabricatorAjaxRequestExceptionHandler.php:27]
[Mon Sep 05 12:15:33.640868 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #15 PhabricatorAjaxRequestExceptionHandler::handleRequestException(AphrontRequest, AphrontDuplicateKeyQueryException) called at [<phabricator>/src/aphront/configuration/AphrontApplicationConfiguration.php:644]
[Mon Sep 05 12:15:33.640870 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #16 AphrontApplicationConfiguration::handleException(AphrontDuplicateKeyQueryException) called at [<phabricator>/src/aphront/configuration/AphrontApplicationConfiguration.php:242]
[Mon Sep 05 12:15:33.640873 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #17 AphrontApplicationConfiguration::processRequest(AphrontRequest, PhutilDeferredLog, AphrontPHPHTTPSink, MultimeterControl) called at [<phabricator>/src/aphront/configuration/AphrontApplicationConfiguration.php:149]
[Mon Sep 05 12:15:33.640879 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #18 AphrontApplicationConfiguration::runHTTPRequest(AphrontPHPHTTPSink) called at [<phabricator>/webroot/index.php:17]
```
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D16494
Summary:
Fixes T11584. This controller does unnecessary CAN_EDIT policy checks.
These checks are enforced by `EditEngine`, and you can make certain types of edits (including comments) even without full-blown edit permission.
Test Plan:
- Commented as a user without edit permission.
- Tried to edit as a user without edit permission, was rebuffed with a policy dialog.
- Edited as a user with edit permission.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11584
Differential Revision: https://secure.phabricator.com/D16493
Summary:
Fixes T11590. Currently, we incorrectly consider cluster repository versions that are (or were) on devices which are no longer part of the active cluster service when building this status screen.
Instead, ignore them. This is just a display bug; the actual `ClusterEngine` already had similar logic.
Test Plan:
- Added a bad leader record to `repository_workingcopyversion`.
- Before patch, got a bad "Partial (1w)" sync:
{F1802292}
- After patch, got a good "Sycnchronized":
{F1802293}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11590
Differential Revision: https://secure.phabricator.com/D16492
Summary: Review multimeter logs for new CSS/JS resources that should be in packages.
Test Plan: Review some pages in sandbox, no CSS errors.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16490
Summary: Ref T11132, swaps in new UI for welcome page using guide modules
Test Plan: Test instance and non instance guides. Test each setting. Unclear on how to test people / Phacility. Just change the URL link?
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11132
Differential Revision: https://secure.phabricator.com/D16482
Summary:
This is hacky, and I'm not sure I'm happy with it; Until T9365 is done, this will show up
broken tests with an appropriate star in the Revision History.
Test Plan: Created 1M messages in a couple of old diffs in a revision. The query took ~80us (On SSD drive).
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D16483
Summary:
Fixes T11577. When we connect to a host and try to select a database which does not exist, we currently treat it as though the host wasn't reachable.
This isn't correct, and prevents storage from being initialized while already in cluster mode, since the "config" database won't exist yet the first time we connect.
Instead, distinguish between `AphrontSchemaQueryException` (thrown on connection if the requested database is not present) and other errors.
Test Plan:
- Put Phabricator into cluster database mode (`cluster.databases = ...`).
- Swapped `storage.default-namespace` to force initialization of a new install.
- Ran `bin/storage upgrade`.
- Before patch: Immediate fatal about unreachablility.
- After patch: Database initialized.
- Also ran initialization steps in tranditional single-host mode (`cluster.databases` empty, `mysql.host` configured).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11577
Differential Revision: https://secure.phabricator.com/D16489
Summary:
Ref T10867 for original use case. This workflow provides a plausible way for administrators to stop the daemons when performing upgrades or maintenance, then bring those daemons back up without resulting in the failure of builds that were running at the time.
On our organization's phab install, builds are running 24/7. The majority of these builds last for at least several minutes, and contain build steps which fail if interrupted and then resumed, as happens when turning daemons on and off.
Instead of allowing these build steps to resume execution as normal, this workflow will instruct active builds to restart their entire build process instead of just resuming whichever step they were on.
Test Plan:
contrived a build plan which would fail if resumed partway through:
- lease a working copy
- command `touch restart_{build.id}`
- command `test -e restart_{build.id} && rm restart_{build.id} && sleep 60`
followed old procedure:
- run a few of these builds manually
- `./bin/phd stop`
- `./bin/phd start`
- saw the builds fail
followed new procedure:
- run a few of these builds manually
- `./bin/phd stop`
- `./bin/harbormaster restart --active`
- `./bin/phd start`
- saw the builds pass
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Maniphest Tasks: T10867
Differential Revision: https://secure.phabricator.com/D16485
Summary:
* Fixed conveted => converted
Ref T11576
Test Plan: * Looked at a page, where somebody converted an AllDay Event to a normal one
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Tags: #calendar
Maniphest Tasks: T11576
Differential Revision: https://secure.phabricator.com/D16488
Summary: Ref T11575. After D16431, the parser may return arrays.
Test Plan: Ran `bin/diviner generate --clean` in `phabricator/` without errors. Previously, this raised some parsing errors related to getting arrays where strings were expected.
Reviewers: chad, yelirekim, joshuaspence
Reviewed By: joshuaspence
Maniphest Tasks: T11575
Differential Revision: https://secure.phabricator.com/D16487
Summary:
Ref T7924. This:
- Adds support for remarkup block changes to Modular Transactions.
- Exposes remarkup changes from the Calendar event "Description" transaction.
This makes stuff like mentions and file embeds work properly.
Test Plan:
Mentioned a task in an event description, saw a mention appear on the task.
Uploaded a file to an event description, saw the file become "Attached" to the event.
(Neither of these worked properly before.)
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7924
Differential Revision: https://secure.phabricator.com/D16481
Summary: See T10746.
Test Plan: Fail one of several builds, run `./bin/harbormaster update`, see that Build Status is Failed.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, O14 ATC Monitoring, yelirekim
Maniphest Tasks: T10746
Differential Revision: https://secure.phabricator.com/D16480
Summary: Ref T11132. Adds a text panel to feed if no stories are present and the user is an admin. Seems ok-ish for 15 minutes. Happy to take content suggestions.
Test Plan: Make a new install, see panel. Log in as new user, don't see panel.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11132
Differential Revision: https://secure.phabricator.com/D16479
Summary: Splitting these up to re-use in Config as a stop gap.
Test Plan: Visit welcome, install, and quick start on guides app
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16478
Summary: Fixes T11569. This fixes a known bad `setIcon()`. I also looked for more calls to `setIcon()` without success, and stubbed `setIcon()` so we're in good shape even if more exist.
Test Plan:
- Grepped for `setIcon(` and manually inspect all 1,004 callsites to look for calls on `PHUIObjectItemView` objects.
- Grepped for "high risk" callsites (`setIcon` in file after `PHUIObjectItemView`) and re-examined them. I identified these files with this command:
```
git ls-tree -r --name-only HEAD | xargs pcregrep -i -M -H -c --files-with-matches -o 'PHUIObjectItemView(.|\n)*setIcon'
```
There might be some more clever way to do that.
- Since this only identified the callsites I already knew about and I don't have a ton of confidence that I didn't miss any, I put a stub in place that logs a deprecation warning. I'll file a followup to go clean these up in a month or so if the logs are clean.
- Loaded Nuance, saw it work but warn.
- Changed Nuance to use `setStatusIcon()`, loaded Nuance, no more fatal.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11569
Differential Revision: https://secure.phabricator.com/D16477
Summary: This adds status icons, locked, hidden, editable, customized, to the list of options in config. Makes it easier to read and assertain state.
Test Plan:
View a hidden, customized, editable, and locked.
{F1796320}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16475
Summary: Fixes T10679. Added a 'short url' field to the phurl link page and changed the "view url" button to link to the shortened version
Test Plan: Create a phurl link (or navigate to an existing one) and note that there is now a field for "Short URL". Also verified that the "Visit URL" button in the top right still works as intended
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley, yelirekim
Maniphest Tasks: T10679
Differential Revision: https://secure.phabricator.com/D16473
Summary:
Fixes T11555. Previously changing the extension of a paste wouldn't change the syntax highlight language. Now it does.
Also, feed items involving autodetect weren't rendering in a readable way.
Test Plan: Created a paste named `paste.php` and let it autodetect language. Then edited the paste to be named paste.rainbow. It should now be highlighted in raiinnboow
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley, yelirekim
Maniphest Tasks: T11555
Differential Revision: https://secure.phabricator.com/D16474
Summary: Ref T11559. This makes managing large numbers of repositories slightly easier.
Test Plan: {F1796119}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11559
Differential Revision: https://secure.phabricator.com/D16472
Summary: Fixes T11556. This was just missing an `implements ...`, which became necessary at some point even for classes that don't use much of the beahvior (ModularTransactions?).
Test Plan: Created a new test payment provider on a Phortune merchant.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11556
Differential Revision: https://secure.phabricator.com/D16471
Summary: Fixes T11541. `PhabricatorApplication::getIconURI()` has been returning only null for a while (I assume in preparation to remove it). I removed the method and all the remaining call sites.
Test Plan: Removed the method and then clicked around. Things didn't explode!
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, yelirekim
Maniphest Tasks: T11541
Differential Revision: https://secure.phabricator.com/D16470
Summary: Previously we collapsed all table search results, but the new UI doesn't need it. Remove unused methods and fix CSS.
Test Plan: Legalpad Signatures, Phortune Accounts.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16469
Summary: Fixes T11532. The language selection for pastes is now a typeahead that is backed by `pygments.dropdown-choices`. There is still a bit of weirdness around making "auto-detection" the default state. To actually select a different language, you first need to remove the "auto detect" option that is pre-populated in a new paste. Other than that, it works as intended.
Test Plan:
Create a new paste with a file extension that can be auto-detected.
Created a new paste and manually selected the language
Edited a paste and changed the language.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley, yelirekim
Maniphest Tasks: T11532
Differential Revision: https://secure.phabricator.com/D16463
Summary: Ref T11132, significantly cleans up the Config app, new layout, icons, spacing, etc. Some minor todos around re-designing "issues", mobile support, and maybe another pass at actual Group pages.
Test Plan: Visit and test every page in the config app, set new items, resolve setup issues, etc.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam, Korvin
Maniphest Tasks: T11132
Differential Revision: https://secure.phabricator.com/D16468
Summary: Ref T11132. This gets rid of the red bar for admins and instead shows a new menu item next to notifications/chat if there are unresolved configuration issues. Menu goes away if there are no issues. May move this later into the bell icon, but think think might be the right place to start especially for NUX and updates. Maybe limit the number of items?
Test Plan:
Tested with some, lots, and no config issues.
{F1790156}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11132
Differential Revision: https://secure.phabricator.com/D16461
Summary: I plan to reuse these styles with Config, maybe also Almanac, etc.
Test Plan: Review /guides/, see same styles.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16467
Summary:
Fixes T10423. Ref T11524. This changes `diffusion.rawdiffquery` to return a file PHID instead of a blob of data.
This is better in general, but particularly better for huge diffs (as in T10423) and diffs with non-utf8 data (as in T10423).
Test Plan:
- Used `bin/differential extract` to extract a latin1 diff, got a clean diff.
- Used `bin/repository reparse --herald` to rerun herald on a latin1 diff, got a clean result.
- Pushed latin1 diffs to test commit hooks.
- Triggered the the too large / too slow logic.
- Viewed latin1 diffs in Diffusion.
- Used "blame past this change" in Diffusion to hit the `before` logic.
Reviewers: chad
Reviewed By: chad
Subscribers: eadler
Maniphest Tasks: T10423, T11524
Differential Revision: https://secure.phabricator.com/D16460
Summary:
Ref T11524. Ref T10423. Earlier, I converted `diffusion.filecontentquery` to put the actual file content in Files, then return a PHID for the file, instead of trying to send the content over Conduit.
In T11524, we have a similar set of problems with diffs that contain non-UTF8 data (and, in T10423, diffs that are simply enormous).
I want to provide an API method to do the same sort of thing with diff output (like from `git diff`), so we call the method, it shoves the data in Files, and then we go pull it out of Files.
To support this, take the "shove the output of a Future into Files" logic and put it in a new base `FileFuture` query. This will let me make `RawDiffQuery` share the logic more easily.
Test Plan: Browsed Diffusion, ran `diffusion.filecontentquery` to fetch file content.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10423, T11524
Differential Revision: https://secure.phabricator.com/D16458
Summary: Fixes T11513. Previously the selector was just a giant dropdown which was just... just too much. Now there's a handy typeahead.
Test Plan:
Happy Path:
Go to `Settings -> Home Page -> Pin Application`, start typing in the form then select one of the options. Click on "Pin Application". The application should now be in the list.
Other paths:
- Type nothing into the box and submit, nothing should happen.
- Choose an application that is already pinned. The list should stay the same.
- Type nonsense into the box and submit, nothing should happen.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: chad, Korvin, epriestley, yelirekim
Maniphest Tasks: T11513
Differential Revision: https://secure.phabricator.com/D16459
Summary:
Ref T11524. This problem was more difficult to diagnose than necessary because we swallow errors silently in `AphontResponse` when emitting JSON responses.
Instead of using `json_encode()`, use `phutil_json_encode()` which throws on failure.
Test Plan:
Old behavior was HTTP 200 with no body.
New behavior is HTTP 500 with this message:
```
[2016-08-26 07:33:59] EXCEPTION: (HTTPFutureHTTPResponseStatus) [HTTP/500] Internal Server Error
Exception: Failed to JSON encode value (#5: Malformed UTF-8 characters, possibly incorrectly encoded): Dictionary value at key "result" is not valid UTF8, and cannot be JSON encoded: diff --git a/latin1.txt b/latin1.txt
new file mode 100644
index 0000000..ce6c927
--- /dev/null
+++ b/latin1.txt
@@ -0,0 +1 @@
+<�>
. at [<phutil>/src/future/http/BaseHTTPFuture.php:339]
```
Reviewers: chad, avivey
Reviewed By: avivey
Maniphest Tasks: T11524
Differential Revision: https://secure.phabricator.com/D16457
Summary:
Fixes T11537. See that task for discussion.
Although we could accommodate these faithfully, it requires a huge migration and affects one repository on one install which was written with buggy tools.
At least for now, just replace out-of-32-bit-range epoch values with the current time, which is often somewhat close to the real value.
Test Plan:
- Following the instructions in T11537, created commits in 40,000 AD.
- Tried to import them, reproducing the "epoch" database issue.
- Applied the patch.
- Successfully imported future-commits, with some liberties around commit dates. Note that author date (not stored in an `epoch` column) is still shown faithfully:
{F1789302}
Reviewers: chad, avivey
Reviewed By: avivey
Maniphest Tasks: T11537
Differential Revision: https://secure.phabricator.com/D16456
Summary:
Fixes T9235. When the stars align, PHP 5.6 or newer emits a deprecation warning on startup about "always_populate_raw_post_data" which occurs too early for us to intercept and can break responses by adding garbage to the output.
These settings appear to be sufficient:
```
always_populate_raw_post_data = 1
display_errors = 1
display_startup_errors = 1
error_reporting = -1
```
Then make a request with an unusual content type:
```
$ curl -X POST -H "Content-Type: application/json" -d "{foo: bar}" http://phabricator.example.com/
```
This triggers the warning:
```
<br />
<b>Deprecated</b>: Automatically populating $HTTP_RAW_POST_DATA is deprecated and will be removed in a future version. To avoid this warning set 'always_populate_raw_post_data' to '-1' in php.ini and use the php://input stream instead. in <b>Unknown</b> on line <b>0</b><br />
<br />
...
```
To avoid this, just instruct administrators to set this value to "-1", which completely disables the feature and silences the warning.
Test Plan:
- Reproduced this issue by following the instructions above.
- Triggered the setup issue locally and read all the captivating prose:
{F1786911}
- Made the configuration change it directed me to, saw the setup issue resolve.
Reviewers: jcox
Reviewed By: jcox
Maniphest Tasks: T9235
Differential Revision: https://secure.phabricator.com/D16454
Summary: Really long text strings break this ui when first setting up Phabricator.
Test Plan: MySQL sql_mode setup issue.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16455
Summary: Fixes T9117. Adds a migration to remove ponder vote data.
Test Plan: I added a bunch of lines to phabricator_user.edge with type 18 and they were successfully removed by this patch
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, yelirekim
Maniphest Tasks: T9117
Differential Revision: https://secure.phabricator.com/D16452
Summary: Ref T11132. This is a new default default (no dashboard) homepage. It offers (Diffs) (Tasks) (Repositories) in the main column and (Feed) in the side column. No NUX stuff, No logged out public view (upcoming diff). This should be complete, but unclear how to bucketize Differential.
Test Plan: Test new account's default homepage.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11132
Differential Revision: https://secure.phabricator.com/D16449
Summary: Ref T8628. Updates people controllers for handleRequest
Test Plan: Viewed the people list, viewed the activity logs, then went through the approval process for a new user account.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, yelirekim
Maniphest Tasks: T8628
Differential Revision: https://secure.phabricator.com/D16451
Summary: Fixes T8850. Previously, if a user's preamble script mangled `$_SERVER['REMOTE_ADDR']` or somehow set it to `null`, the user would get errors when performing certain actions. Now those errors shouldn't occur, and instead the user will be warned that there is a setup issue related to their preamble script.
Test Plan: Create a preamble script that contains `$_SERVER['REMOTE_ADDR'] = null;` then navigate to /config/issue/. There should be a warning there about `REMOTE_ADDR` not being available.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, yelirekim, epriestley
Maniphest Tasks: T8850
Differential Revision: https://secure.phabricator.com/D16450
Summary: Ref T10951. This adds the application name as an attribute below the document type in the UI for doc type search.
Test Plan: Verify that the application name appears as an attribute on the document type results.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Maniphest Tasks: T10951
Differential Revision: https://secure.phabricator.com/D16446
