Summary: Depends on D20008. Ref T920. Continue fleshing out contact number behaviors.
Test Plan:
- Enabled and disabled a contact number.
- Saw list, detail views reflect change.
- Added number X, disabled it, added it again (allowed), enabled the disabled one ("already in use" exception).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T920
Differential Revision: https://secure.phabricator.com/D20010
Summary:
Depends on D20006. Ref T13222. Currently, the "MFA Is Required" gate doesn't let you do anything else, but you'll need to be able to access "Contact Numbers" if an install provides SMS MFA.
Tweak this UI to give users limited access to settings, so they can set up contact numbers and change their language.
(This is a little bit fiddly, and I'm doing it early on partly so it can get more testing as these changes move forward.)
Test Plan: {F6146136}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D20008
Summary:
Ref T920. To send you SMS messages, we need to know your phone number.
This adds bare-bone basics (transactions, storage, editor, etc).
From here:
**Disabling Numbers**: I'll let you disable numbers in an upcoming diff.
**Primary Number**: I think I'm just going to let you pick a number as "primary", similar to how email works. We could imagine a world where you have one "MFA" number and one "notifications" number, but this seems unlikely-ish?
**Publishing Numbers (Profile / API)**: At some point, we could let you say that a number is public / "show on my profile" and provide API access / directory features. Not planning to touch this for now.
**Non-Phone Numbers**: Eventually this could be a list of other similar contact mechanisms (APNS/GCM devices, Whatsapp numbers, ICQ number, twitter handle so MFA can slide into your DM's?). Not planning to touch this for now, but the path should be straightforward when we get there. This is why it's called "Contact Number", not "Phone Number".
**MFA-Required + SMS**: Right now, if the only MFA provider is SMS and MFA is required on the install, you can't actually get into Settings to add a contact number to configure SMS. I'll look at the best way to deal with this in an upcoming diff -- likely, giving you partial access to more of Setings before you get thorugh the MFA gate. Conceptually, it seems reasonable to let you adjust some other settings, like "Language" and "Accessibility", before you set up MFA, so if the "you need to add MFA" portal was more like a partial Settings screen, maybe that's pretty reasonable.
**Verifying Numbers**: We'll probably need to tackle this eventually, but I'm not planning to worry about it for now.
Test Plan: {F6137174}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: avivey, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T920
Differential Revision: https://secure.phabricator.com/D19988
Summary: See https://secure.phabricator.com/D18901#249481. Update the docs and a warning string to reflect the new reality that `bin/auth recover` is now able to recover any account, not just administrators.
Test Plan: Mk 1 eyeball
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D20007
Summary: Depends on D19992. Ref T13222. If administrators provide a custom login message, show it on the login screen.
Test Plan:
{F6137930}
- Viewed login screen with and without a custom message.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19994
Summary:
Ref T13222. Long ago, we had a Config option (`welcome.html`) to let you dump HTML onto the login screen, but this was relatively hard to use and not good from a security perspective.
In some cases this was obsoleted by Dashboards, but there's at least some remaining set of use cases for actual login instructions on the login screen. For example, WMF has some guidance on //which// SSO mechanism to use based on what types of account you have. On `secure`, users assume they can register by clicking "Log In With GitHub" or whatever, and it might reduce frustration to tell them upfront that registration is closed.
Some other types of auth messaging could also either use customization or defaults (e.g., the invite/welcome/approve mail).
We could do this with a bunch of Config options, but I'd generally like to move to a world where there's less stuff in Config and more configuration is contextual. I think it tends to be easier to use, and we get a lot of fringe benefits (granular permissions, API, normal transaction logs, more abililty to customize workflows and provide contextual help/hints, etc). Here, for example, we can provide a remarkup preview, which would be trickier with Config.
This does not actually do anything yet.
Test Plan: {F6137541}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19992
Summary:
Ref T13222. Ref T13231. See PHI912. I'm planning to turn MFA providers into concrete objects, so you can disable and configure them.
Currently, we only support TOTP, which doesn't require any configuration, but other provider types (like Duo or Yubikey OTP) do require some configuration (server URIs, API keys, etc). TOTP //could// also have some configuration, like "bits of entropy" or "allowed window size" or whatever, if we want.
Add concrete objects for this and standard transaction / policy / query support. These objects don't do anything interesting yet and don't actually interact with MFA, this is just skeleton code for now.
Test Plan:
{F6090444}
{F6090445}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13231, T13222
Differential Revision: https://secure.phabricator.com/D19935
Summary:
Depends on D19903. Ref T13222. This was a Facebook-specific thing from D6202 that I believe no other install ever used, and I'm generally trying to move away from the old "event" system (the more modern modular/engine patterns generally replace it).
Just drop support for this. Since the constant is being removed, anything that's actually using it should break in an obvious way, and I'll note this in the changelog.
There's no explicit replacement but I don't think this hook is useful for anything except "being Facebook in 2013".
Test Plan:
- Grepped for `TYPE_AUTH_WILLLOGIN`.
- Logged in.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19904
Summary:
Depends on D19902. Ref T13222. This is mostly a "while I'm in here..." change since MFA is getting touched so much anyway.
Doing cluster support, I sometimes need to log into user accounts on instances that have MFA. I currently accomplish this by doing `bin/auth recover`, getting a parital session, and then forcing it into a full session in the database. This is inconvenient and somewhat dangerous.
Instead, allow `bin/auth recover` to generate a link that skips the "partial session" stage: adding required MFA, providing MFA, and signing legalpad documents.
Anyone who can run `bin/auth recover` can do this anyway, this just reduces the chance I accidentally bypass MFA on the wrong session when doing support stuff.
Test Plan:
- Logged in with `bin/auth recover`, was prompted for MFA.
- Logged in with `bin/auth recover --force-full-session`, was not prompted for MFA.
- Did a password reset, followed reset link, was prompted for MFA.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19903
Summary:
Ref T13222. Ref T13225. We store a digest of the session key in the session table (not the session key itself) so that users with access to this table can't easily steal sessions by just setting their cookies to values from the table.
Users with access to the database can //probably// do plenty of other bad stuff (e.g., T13134 mentions digesting Conduit tokens) but there's very little cost to storing digests instead of live tokens.
We currently digest session keys with HMAC-SHA1. This is fine, but HMAC-SHA256 is better. Upgrade:
- Always write new digests.
- We still match sessions with either digest.
- When we read a session with an old digest, upgrade it to a new digest.
In a few months we can throw away the old code. When we do, installs that skip upgrades for a long time may suffer a one-time logout, but I'll note this in the changelog.
We could avoid this by storing `hmac256(hmac1(key))` instead and re-hashing in a migration, but I think the cost of a one-time logout for some tiny subset of users is very low, and worth keeping things simpler in the long run.
Test Plan:
- Hit a page with an old session, got a session upgrade.
- Reviewed sessions in Settings.
- Reviewed user logs.
- Logged out.
- Logged in.
- Terminated other sessions individually.
- Terminated all other sessions.
- Spot checked session table for general sanity.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13225, T13222
Differential Revision: https://secure.phabricator.com/D19883
Summary:
Depends on D19155. Ref T13094. Ref T4340.
We can't currently implement a strict `form-action 'self'` content security policy because some file downloads rely on a `<form />` which sometimes POSTs to the CDN domain.
Broadly, stop generating these forms. We just redirect instead, and show an interstitial confirm dialog if no CDN domain is configured. This makes the UX for installs with no CDN domain a little worse and the UX for everyone else better.
Then, implement the stricter Content-Security-Policy.
This also removes extra confirm dialogs for downloading Harbormaster build logs and data exports.
Test Plan:
- Went through the plain data export, data export with bulk jobs, ssh key generation, calendar ICS download, Diffusion data, Paste data, Harbormaster log data, and normal file data download workflows with a CDN domain.
- Went through all those workflows again without a CDN domain.
- Grepped for affected symbols (`getCDNURI()`, `getDownloadURI()`).
- Added an evil form to a page, tried to submit it, was rejected.
- Went through the ReCaptcha and Stripe flows again to see if they're submitting any forms.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13094, T4340
Differential Revision: https://secure.phabricator.com/D19156
Summary:
Ref T13043. This moves user account passwords to the new shared infrastructure.
There's a lot of code changes here, but essentially all of it is the same as the VCS password logic in D18898.
Test Plan:
- Ran migration.
- Spot checked table for general sanity.
- Logged in with an existing password.
- Hit all error conditions on "change password", "set password", "register new account" flows.
- Verified that changing password logs out other sessions.
- Verified that revoked passwords of a different type can't be selected.
- Changed passwords a bunch.
- Verified that salt regenerates properly after password change.
- Tried to login with the wrong password, which didn't work.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18903
Summary: Ref T13043. Adds CLI support for revoking SSH keys. Also retargets UI language from "Deactivate" to "Revoke" to make it more clear that this is a one-way operation. This operation is already correctly implemented as a "Revoke" operation.
Test Plan: Used `bin/auth revoke --type ssh` to revoke keys, verified they became revoked (with proper transactions) in the UI. Revoked keys from the web UI flow.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18893
Summary:
See PHI223. Ref T13024. There's a remaining registration/login order issue after the other changes in T13024: we lose track of the current URI when we go through the MFA flow, so we can lose "Set Password" at the end of the flow.
Specifically, the flow goes like this today:
- User clicks the welcome link in email.
- They get redirected to the "set password" settings panel.
- This gets pre-empted by Legalpad (although we'll potentially survive this with the URI intact).
- This also gets pre-empted by the "Set MFA" workflow. If the user completes this flow, they get redirected to a `/auth/multifactor/?id=123` sort of URI to highlight the factor they added. This causes us to lose the `/settings/panel/password/blah/blah?key=xyz` URI.
The ordering on this is also not ideal; it's preferable to start with a password, then do the other steps, so the user can return to the flow more easily if they are interrupted.
Resolve this by separating the "change your password" and "set/reset your password" flows onto two different pages. This copy/pastes a bit of code, but both flows end up simpler so it feels reasonable to me overall.
We don't require a full session for "set/reset password" (so you can do it if you don't have MFA/legalpad yet) and do it first.
This works better and is broadly simpler for users.
Test Plan:
- Required MFA + legalpad, invited a user via email, registered.
- Before: password set flow got lost when setting MFA.
- After: prompted to set password, then sign documents, then set up MFA.
- Reset password (with MFA confgiured, was required to MFA first).
- Tried to reset password without a valid reset key, wasn't successful.
- Changed password using existing flow.
- Hit various (all?) error cases (short password, common password, mismatch, missing password, etc).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13024
Differential Revision: https://secure.phabricator.com/D18840
Summary: Depends on D18791. Ref T13024. This clears up another initialization order issue, where an unverified address could prevent MFA enrollment.
Test Plan: Configured both verification required and MFA required, clicked "Add Factor", got a dialog for the workflow.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13024
Differential Revision: https://secure.phabricator.com/D18792
Summary:
Depends on D18790. Ref T13024. Fixes T8335. Currently, "unapproved" and "disabled" users are bundled together. This prevents users from completing some registration steps (verification, legalpad documents, MFA enrollment) before approval.
Separate approval out and move it to the end so users can do all the required enrollment stuff on their end before we roadblock them.
Test Plan: Required approval, email verification, signatures, and MFA. Registered an account. Verified email, signed documents, enrolled in MFA, and then got prompted to wait for approval.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13024, T8335
Differential Revision: https://secure.phabricator.com/D18791
Summary: Noticed a couple of typos in the docs, and then things got out of hand.
Test Plan:
- Stared at the words until my eyes watered and the letters began to swim on the screen.
- Consulted a dictionary.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, yelirekim, PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D18693
Summary:
See PHI78. The user was getting this message and (reasonably) interpreted it to mean "reset mail can never be sent to unverified addresses".
Reword it to be more clear, albeit an entire paragraph long. I don't really have a good solution in these cases where we'd need a whole page to explain what's happening (this, plus "we can't tell you which address you should use because an attacker could get information if we did" and "this rule defuses the risk that an opportunistic attacker may try to compromise your account after you add an email you don't own by mistake"). We could write it up separately and link to it, but I feel like that stuff tends to get out of date.
Just land somewhere in the middle.
Test Plan: {F5189105}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18630
Summary: Ref T12964. This feels like a cheat, but works well. Just redirect the user back to the form they came from instead of to the key page.
Test Plan: Add a key to a user profile, add a key to an Alamanac device. Grep for PhabricatorAuthSSHKeyTableView and check all locations.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12964
Differential Revision: https://secure.phabricator.com/D18445
Summary: Cursory research indicates that "login" is a noun, referring to a form, and "log in" is a verb, referring to the action of logging in. I went though every instances of 'login' I could find and tried to clarify all this language. Also, we have "Phabricator" on the registration for like 4-5 times, which is a bit verbose, so I tried to simplify that language as well.
Test Plan: Tested logging in and logging out. Pages feel simpler.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18322
Summary:
Ref M1476. Currently, `setColor('simple')` is meaningful. Instead, `setButtonType('simple')`.
Depends on D18047.
Test Plan: Looked at UI examples, Phame, Auth. Notifications mooted by D18047.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18048
Summary: Ref T12509. This encourages code to move away from HMAC+SHA1 by making the method name more obviously undesirable.
Test Plan: `grep`, browsed around.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12509
Differential Revision: https://secure.phabricator.com/D17632
Summary:
Ref T12464. This is a very old method which can return an existing file instead of creating a new one, if there's some existing file with the same content.
In the best case this is a bad idea. This being somewhat reasonable predates policies, temporary files, etc. Modern methods like `newFromFileData()` do this right: they share underlying data in storage, but not the actual `File` records.
Specifically, this is the case where we get into trouble:
- I upload a private file with content "X".
- You somehow generate a file with the same content by, say, viewing a raw diff in Differential.
- If the diff had the same content, you get my file, but you don't have permission to see it or whatever so everything breaks and is terrible.
Just get rid of this.
Test Plan:
- Generated an SSH key.
- Viewed a raw diff in Differential.
- (Did not test Phragment.)
Reviewers: chad
Reviewed By: chad
Subscribers: hach-que
Maniphest Tasks: T12464
Differential Revision: https://secure.phabricator.com/D17617
Summary:
Ref T11357. When creating a file, callers can currently specify a `ttl`. However, it isn't unambiguous what you're supposed to pass, and some callers get it wrong.
For example, to mean "this file expires in 60 minutes", you might pass either of these:
- `time() + phutil_units('60 minutes in seconds')`
- `phutil_units('60 minutes in seconds')`
The former means "60 minutes from now". The latter means "1 AM, January 1, 1970". In practice, because the GC normally runs only once every four hours (at least, until recently), and all the bad TTLs are cases where files are normally accessed immediately, these 1970 TTLs didn't cause any real problems.
Split `ttl` into `ttl.relative` and `ttl.absolute`, and make sure the values are sane. Then correct all callers, and simplify out the `time()` calls where possible to make switching to `PhabricatorTime` easier.
Test Plan:
- Generated an SSH keypair.
- Viewed a changeset.
- Viewed a raw diff.
- Viewed a commit's file data.
- Viewed a temporary file's details, saw expiration date and relative time.
- Ran unit tests.
- (Didn't really test Phragment.)
Reviewers: chad
Reviewed By: chad
Subscribers: hach-que
Maniphest Tasks: T11357
Differential Revision: https://secure.phabricator.com/D17616
Test Plan: attempted to create a new auth provider; observed that "enabled" ui element does not render. viewed existing auth provider and observed that "enabled" ui element still renders
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Maniphest Tasks: T12245
Differential Revision: https://secure.phabricator.com/D17337
Summary: Fixes T11982. If an install is not public, the registering user may not be able to see the inviting user.
Test Plan: {F2097656}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11982
Differential Revision: https://secure.phabricator.com/D17015
Summary:
Ref T9304. This adds a "GuidanceEngine" which can generate "Guidance".
In practice, this lets third-party code (rSERVICES) remove and replace instructions in the UI, which is basically only usefulf or us to tell users to go read the documentation in the Phacility cluster.
The next diff tailors the help on the "Auth Providers" and "Create New User" pages to say "PHACILITY PHACILITY PHACILITY PHACILITY".
Test Plan: Browed to "Auth Providers" and "Create New User" on instanced and non-instanced installs, saw appropriate guidance.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9304
Differential Revision: https://secure.phabricator.com/D16861
Summary:
Fixes T11586. First pass at a class for displaying invisible characters. Still need to:
- Write a couple unit tests
- Add some styling to the .invisible-special spans
- Actually start using the class when displaying form errors to users
Currently this makes the string `"\nab\x00c\x01d\te\nf"` look like:
{F1812711}
Test Plan:
Unit tests all pass and run in <1ms:
{F1812998}
Reviewers: epriestley, #blessed_reviewers, chad
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley, yelirekim
Maniphest Tasks: T11586
Differential Revision: https://secure.phabricator.com/D16541
Summary: I don't think we use footicons, removing that CSS. States were added but only used in Auth, convert them to statusIcon instead.
Test Plan: Visit Auth, UIExamples, grep for `setState`
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16418
Summary: Fixes T11223. I missed a few of these; most of them kept working anyway because we have redirects in place, but make them a bit more modern/not-hard-coded.
Test Plan:
- Generated and revoked API tokens for myself.
- Generated and revoked API tokens for bots.
- Revoked temporary tokens for myself.
- Clicked the link to the API tokens panel from the Conduit console.
- Clicked all the cancel buttons in all the dialogs, too.
In all cases, everything now points at the correct URIs. Previously, some things pointed at the wrong URIs (mostly dealing with stuff for bots).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11223
Differential Revision: https://secure.phabricator.com/D16185
Summary:
Ref T11179. This splits "Edit Blocking Tasks" into two options now that we have more room ("Edit Parent Tasks", "Edit Subtasks").
This also renames "Blocking" tasks to "Subtasks", and "Blocked" tasks to "Parent" tasks. My goals here are:
- Make the relationship direction more clear: it's more clear which way is up with "parent" and "subtask" at a glance than with "blocking" and "blocked" or "dependent" and "dependency".
- Align language with "Create Subtask".
- To some small degree, use more flexible/general-purpose language, although I haven't seen any real confusion here.
Fixes T6815. I think I narrowed this down to two issues:
- Just throwing a bare exeception (we now return a dialog explicitly).
- Not killing open transactions when the cyclec check fails (we now kill them).
Test Plan:
- Edited parent tasks.
- Edited subtasks.
- Tried to introduce graph cycles, got a nice error dialog.
{F1697087}
{F1697088}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6815, T11179
Differential Revision: https://secure.phabricator.com/D16166
Summary:
Via HackerOne. This page fatals if accessed directly while logged out.
The "shouldRequireLogin()" check is wrong; this is a logged-in page.
Test Plan:
Viewed the page while logged out, no more fatal.
Faked my way through the actual verification flow.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D16077
Summary: Fixes T11107. The URI change here meant we were dropping the "key" parameter, which allows you to set a new password without knowing your old one.
Test Plan: Reset password, didn't need to provide old one anymore.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11107
Differential Revision: https://secure.phabricator.com/D16075
Summary:
Ref T10785. Around the time we launched Phacility SAAS we implemented this weird autologin hack. It works fine, so clean it up, get rid of the `instanceof` stuff, and support it for any OAuth2 provider.
(We could conceivably support OAuth1 as well, but no one has expressed an interest in it and I don't think I have any OAuth1 providers configured correctly locally so it would take a little bit to set up and test.)
Test Plan:
- Configured OAuth2 adapters (Facebook) for auto-login.
- Saw no config option on other adapters (LDAP).
- Nuked all options but one, did autologin with Facebook and Phabricator.
- Logged out, got logout screen.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10785
Differential Revision: https://secure.phabricator.com/D16060
Summary:
Ref T10917. This cheats fairly heavily to generate SSH key mail:
- Generate normal transaction mail.
- Force it to go to the user.
- Use `setForceDelivery()` to force it to actually be delivered.
- Add some warning language to the mail body.
This doesn't move us much closer to Glorious Infrastructure for this whole class of events, but should do what it needs to for now and doesn't really require anything sketchy.
Test Plan: Created and edited SSH keys, got security notice mail.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10917
Differential Revision: https://secure.phabricator.com/D15948
Summary:
Ref T10917. Converts web UI edits to transactions.
This is about 95% "the right way", and then I cheated on the last 5% instead of building a real EditEngine. We don't need it for anything else right now and some of the dialog workflows here are a little weird so I'm just planning to skip it for the moment unless it ends up being easier to do after the next phase (mail notifications) or something like that.
Test Plan: {F1652160}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10917
Differential Revision: https://secure.phabricator.com/D15947
Summary:
Ref T10917. This primarily prepares these for transactions by giving us a place to:
- review old deactivated keys; and
- review changes to keys.
Future changes will add transactions and a timeline so key changes are recorded exhaustively and can be more easily audited.
Test Plan:
{F1652089}
{F1652090}
{F1652091}
{F1652092}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10917
Differential Revision: https://secure.phabricator.com/D15946
Summary:
Ref T10917. Currently, when you delete an SSH key, we really truly delete it forever.
This isn't very consistent with other applications, but we built this stuff a long time ago before we were as rigorous about retaining data and making it auditable.
In partiular, destroying data isn't good for auditing after security issues, since it means we can't show you logs of any changes an attacker might have made to your keys.
To prepare to improve this, stop destoying data. This will allow later changes to become transaction-oriented and show normal transaction logs.
The tricky part here is that we have a `UNIQUE KEY` on the public key part of the key.
Instead, I changed this to `UNIQUE (key, isActive)`, where `isActive` is a nullable boolean column. This works because MySQL does not enforce "unique" if part of the key is `NULL`.
So you can't have two rows with `("A", 1)`, but you can have as many rows as you want with `("A", null)`. This lets us keep the "each key may only be active for one user/object" rule without requiring us to delete any data.
Test Plan:
- Ran schema changes.
- Viewed public keys.
- Tried to add a duplicate key, got rejected (already associated with another object).
- Deleted SSH key.
- Verified that the key was no longer actually deleted from the database, just marked inactive (in future changes, I'll update the UI to be more clear about this).
- Uploaded a new copy of the same public key, worked fine (no duplicate key rejection).
- Tried to upload yet another copy, got rejected.
- Generated a new keypair.
- Tried to upload a duplicate to an Almanac device, got rejected.
- Generated a new pair for a device.
- Trusted a device key.
- Untrusted a device key.
- "Deleted" a device key.
- Tried to trust a deleted device key, got "inactive" message.
- Ran `bin/ssh-auth`, got good output with unique keys.
- Ran `cat ~/.ssh/id_rsa.pub | ./bin/ssh-auth-key`, got good output with one key.
- Used `auth.querypublickeys` Conduit method to query keys, got good active keys.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10917
Differential Revision: https://secure.phabricator.com/D15943
Summary: This error message is pointless and dead-ends logged-in users needlessly if they're sent to the register page by documentation or Advanced Enterprise Sales Funnels.
Test Plan: Visited `/auth/register/` while logged in, was sent home.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15739
Summary: Ref T7673. This is really just so I can force admin.phacility.com logout when you log out of an instance, but there are a few other things we could move here eventually, like the WILLREGISTERUSER event.
Test Plan: Logged out of an instance, got logged out of parent (see next change).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7673
Differential Revision: https://secure.phabricator.com/D15629
Summary:
Ref T7303. Ref T7673. This implements an "auth.logout" which:
- terminates all web sessions;
- terminates the current OAuth token if called via OAuth; and
- may always be called via OAuth.
(Since it consumes an OAuth token, even a "malicious" OAuth application can't really be that much of a jerk with this: it can't continuously log you out, since calling the method once kills the token. The application would need to ask your permission again to get a fresh token.)
The primary goal here is to let Phacility instances call this against the Phacility upstream, so that when you log out of an instance it also logs you out of your Phacility account (possibly with a checkbox or something).
This also smooths over the session token code. Before this change, your sessions would get logged out but when you reloaded we'd tell you your session was invalid.
Instead, try to clear the invalid session before telling the user there's an issue. I think that ssentially 100% of invalid sessions are a result of something in this vein (e.g., forced logout via Settings) nowadays, since the session code is generally stable and sane and has been for a long time.
Test Plan:
- Called `auth.logout` via console, got a reasonable logout experience.
- Called `auth.logout` via OAuth.
- Tried to make another call, verified OAuth token had been invalidated.
- Verified web session had been invalidated.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7303, T7673
Differential Revision: https://secure.phabricator.com/D15594
Summary: [WIP] Tossing this up for safety and to read through it. Need to test, update some of the other flows. This updates everything in Auth for new UI and modern conventions.
Test Plan: Loooots of random testing, new providers, edit providers, logging out, forgot password... more coming.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15550
Summary:
Ref T10603. This makes minor updates to temporary tokens:
- Rename `objectPHID` (which is sometimes used to store some other kind of identifier instead of a PHID) to `tokenResource` (i.e., which resource does this token permit access to?).
- Add a `userPHID` column. For LFS tokens and some other types of tokens, I want to bind the token to both a resource (like a repository) and a user.
- Add a `properties` column. This makes tokens more flexible and supports custom behavior (like scoping LFS tokens even more tightly).
Test Plan:
- Ran `bin/storage upgrade -f`, got a clean upgrade.
- Viewed one-time tokens.
- Revoked one token.
- Revoked all tokens.
- Performed a one-time login.
- Performed a password reset.
- Added an MFA token.
- Removed an MFA token.
- Used a file token to view a file.
- Verified file token was removed after viewing file.
- Linked my account to an OAuth1 account (Twitter).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10603
Differential Revision: https://secure.phabricator.com/D15478
Summary:
Ref T10603. This converts existing hard-codes to modular constants.
Also removes one small piece of code duplication.
Test Plan:
- Performed one-time logins.
- Performed a password reset.
- Verified temporary tokens were revoked properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10603
Differential Revision: https://secure.phabricator.com/D15476
Summary: Mostly for consistency, we're not using other forms of icons and this makes all classes that use an icon call it in the same way.
Test Plan: tested uiexamples, lots of other random pages.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15125
Summary:
Ref T10004. Currently, when a logged-out user visits an application like Maniphest, we show them a disabled "Create Task" button with no dropdown menu.
This is technically correct in some sense because none of the items in the menu will work, but we can be more helpful and show the items, just in a disabled state:
{F1028903}
When the user clicks these, they'll be pushed through the login flow and (after D14804) end up on the same page they were on when they selected the item. From here, they can proceed normally.
I changed "...to continue." to "...to take this action." to hopefully be a little more clear. In particular, we do not //continue// the action after you log in: you end up back on the same page you started on. For example, if you clicked "Create New Bug" from the list view, you end up back on the list view and need to click "Create New Bug" again. If you clicked "Edit Task" from some task detail page, you end up on the task detail page and have to click "Edit Task" again.
I think this behavior is always very good. I think it is often the best possible behavior: for actions like "Edit Blocking Tasks" and "Merge Duplicates In", the alternatives I can see are:
- Send user back to task page (best?)
- Send user to standalone page with weird dialog on it and no context (underlying problem behavior all of this is tackling, clearly not good)
- Send user back to task page, but with dialog open (very complicated, seems kind of confusing/undesirable?)
For actions like "Create New Bug" or "Edit Task", we have slightly better options:
- Send user back to task page (very good?)
- Send user to edit/create page (slightly better?)
However, we have no way to tell if a Workflow "makes sense" to complete in a standalone way. That is, we can't automatically determine which workflows are like "Edit Task" and which workflows are like "Merge Duplicates In".
Even within an action, this distinction is not straightforward. For example, "Create Task" can standalone from the Maniphest list view, but should not from a Workboard. "Edit Task" can standalone from the task detail page, but should not from an "Edit" pencil action on a list or a workboard.
Since the simpler behavior is easy, very good in all cases, often the best behavior, and never (I think?) confusing or misleading, I don't plan to puruse the "bring you back to the page, with the dialog open" behavior at any point. I'm theoretically open to discussion here if you REALLY want the dialogs to pop open magically but I think it's probably a lot of work.
Test Plan: As a logged out user, clicked "Create Task". Got a dropdown showing the options available to me if I log in. Clicked one, logged in, ended up in a reasonable place (the task list page where I'd started).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10004
Differential Revision: https://secure.phabricator.com/D14806
Summary:
Ref T10004. After a user logs in, we send them to the "next" URI cookie if there is one, but currently don't always do a very good job of selecting a "next" URI, especially if they tried to do something with a dialog before being asked to log in.
In particular, if a logged-out user clicks an action like "Edit Blocking Tasks" on a Maniphest task, the default behavior is to send them to the standalone page for that dialog after they log in. This can be pretty confusing.
See T2691 and D6416 for earlier efforts here. At that time, we added a mechanism to //manually// override the default behavior, and fixed the most common links. This worked, but I'd like to fix the //default// beahvior so we don't need to remember to `setObjectURI()` correctly all over the place.
ApplicationEditor has also introduced new cases which are more difficult to get right. While we could get them right by using the override and being careful about things, this also motivates fixing the default behavior.
Finally, we have better tools for fixing the default behavior now than we did in 2013.
Instead of using manual overrides, have JS include an "X-Phabricator-Via" header in Ajax requests. This is basically like a referrer header, and will contain the page the user's browser is on.
In essentially every case, this should be a very good place (and often the best place) to send them after login. For all pages currently using `setObjectURI()`, it should produce the same behavior by default.
I'll remove the `setObjectURI()` mechanism in the next diff.
Test Plan: Clicked various workflow actions while logged out, saw "next" get set to a reasonable value, was redirected to a sensible, non-confusing page after login (the page with whatever button I clicked on it).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10004
Differential Revision: https://secure.phabricator.com/D14804
