Summary:
Ref T11954. I want to store some lists/arrays in the mutable (database) cache, but it only supports string storage.
Provide a serializing wrapper which flattens when values are written and expands them when they're read.
Test Plan: Used by D16997. See that revision.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11954
Differential Revision: https://secure.phabricator.com/D16999
Summary:
Ref T11954. Depends on D16992. We have some data which can be generated and cached at runtime. Three examples are:
- Class map from Conduit method names to implementing classes.
- Class map from PHID types to implementing classes.
- The main routing map.
None of these are huge wins but they impose global costs and can be shaved down through caching without introducing an enormous amount of new complexity.
The cost to these maps is that sometimes you'll need to restart your webserver, even in development mode if these caches are active. However, in some cases these changes are very rare, and in other cases we can just leave the cache disabled in development mode without a huge complexity cost.
Specifically, the Conduit/PHID type class maps are self-validating and can not go bad, even in development mode.
The routing map will be able to, but I plan to just disable it in development mode.
This provides a general-purpose pure APC cache stack for storing this data.
Test Plan: See future changes.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11954
Differential Revision: https://secure.phabricator.com/D16993
Summary:
Ref T11469. This isn't directly related, but has been on my radar for a while: building SSH keyfiles (particular for installs with a lot of keys, like ours) can be fairly slow.
At least one cluster instance is making multiple clone requests per second. While that should probably be rate limited separately, caching this should mitigate the impact of these requests.
This is pretty straightforward to cache since it's exactly the same every time, and only changes when users modify SSH keys (which is rare).
Test Plan:
- Ran `bin/auth-ssh`, saw authfile generate.
- Ran it again, saw it read from cache.
- Changed an SSH key.
- Ran it again, saw it regenerate.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11469
Differential Revision: https://secure.phabricator.com/D16744
Summary:
Ref T11613. In D16503/T11598 I refined the setup flow to improve messaging for early-stage setup issues, but failed to fully untangle things.
We sometimes still try to access a cache which uses configuration before we build configuration, which causes an error.
Instead, store "are we in flight / has setup ever worked?" in a separate cache which doesn't use the cache namespace. This stops us from trying to read config before building config.
Test Plan:
Hit bad extension error with a fake extension, got a proper setup help page:
{F1812803}
Solved the error, reloaded, broke things again, got a "friendly" page:
{F1812805}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11613
Differential Revision: https://secure.phabricator.com/D16542
Summary:
Ref T4571. When a database goes down briefly, we fall back to replicas.
However, this fallback is slow (not good for users) and keeps sending a lot of traffic to the master (might be bad if the root cause is load-related).
Keep track of recent connections and fully degrade into "severed" mode if we see a sequence of failures over a reasonable period of time. In this mode, we send much less traffic to the master (faster for users; less load for the database).
We do send a little bit of traffic still, and if the master recovers we'll recover back into normal mode seeing several connections in a row succeed.
This is similar to what most load balancers do when pulling web servers in and out of pools.
For now, the specific numbers are:
- We do at most one health check every 3 seconds.
- If 5 checks in a row fail or succeed, we sever or un-sever the database (so it takes about 15 seconds to switch modes).
- If the database is currently marked unhealthy, we reduce timeouts and retries when connecting to it.
Test Plan:
- Configured a bad `master`.
- Browsed around for a bit, initially saw "unrechable master" errors.
- After about 15 seconds, saw "major interruption" errors instead.
- Fixed the config for `master`.
- Browsed around for a while longer.
- After about 15 seconds, things recovered.
- Used "Cluster Databases" console to keep an eye on health checks: it now shows how many recent health checks were good:
{F1213397}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4571
Differential Revision: https://secure.phabricator.com/D15677
Summary:
Fixes T9599. When APC/APCu are not available, we fall back to a disk-based cache.
We try to share this cache across webserver processes like APC/APCu would be shared in order to improve performance, but are just kind of guessing how to coordinate it. From T9599, it sounds like we don't always get this right in every configuration.
Since this is complicated and error prone, just stop trying to do this. This cache has bad performance anyway (no production install should be using it), and we have much better APC/APCu setup instructions now than we did when I wrote this. Just using the PID is simpler and more correct.
Test Plan:
- Artificially disabled APC.
- Reloaded the page, saw all the setup stuff run.
- Reloaded the page, saw no setup stuff run (i.e., cache was hit).
- Restarted the webserver.
- Reloaded the page, saw all the setup stuff run.
- Reloaded again, got a cache hit.
I don't really know how to reproduce the exact problem with the parent PID not working, but from T9599 it sounds like this fixed the issue and from my test plan we still appear to get correct behavior in the standard/common case.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9599
Differential Revision: https://secure.phabricator.com/D14302
Summary: All classes should extend from some other class. See D13275 for some explanation.
Test Plan: `arc unit`
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D13283
Summary:
Ref T8424. This adds a standard KeyValueCache to serve as a request cache.
In particular, I need to cache Spaces (they are frequently accessed, sometimes by multiple viewers) but not have them survive longer than the scope of one request.
This request cache is explicitly destroyed by each web request and each daemon request.
In the very long term, building this kind of construct supports reusing PHP interpreters to run web requests (see some discussion in T2312).
Test Plan:
- Added and executed unit tests.
- Ran every daemon.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8424
Differential Revision: https://secure.phabricator.com/D13153
Summary: Use `__CLASS__` instead of hard-coding class names. Depends on D12605.
Test Plan: Eyeball it.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: hach-que, Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D12806
Summary: Ref T4045. Ref T5179. When saving a modern hunk, deflate it if we have the function and deflating it will save a nontrivial number of bytes.
Test Plan:
- Used `bin/hunks migrate` to move some hunks over, saw ~70-80% compression on most standard hunks.
- Viewed changesets using compressed hunks.
- Profiled `gzinflate()` and verified the cost is trivial (<< 1ms) at least for normal diffs.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4045, T5179
Differential Revision: https://secure.phabricator.com/D9292
Summary:
Fixes T5094. In some cases we do slightly expensive transformations to resources (inlining images, replacing URIs, building packages). We can throw cache in front of them easily since URIs are already permanently associated with a single resource.
Also browse around and move some CSS/JS into packages.
Test Plan:
Added logging to verify the caches are working, saw moderately improved performance.
Browsed around looking at resources tab in developer console, saw fewer total requests.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5094
Differential Revision: https://secure.phabricator.com/D9175
Summary: Most requests examine the same buckets, especially the first bucket. Let them just read it out of request cache.
Test Plan: Observed most bucket fetches resolving in <10us instead of <10ms.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D9080
Summary:
Ref T2683. This is a refinement and simplification of D5257. In particular:
- D5257 only cached the commit chain, not path changes. This meant that we had to go issue an awkward query (which was slow on Facebook's install) periodically while reading the cache. This was reasonable locally but killed performance at FB scale. Instead, we can include path information in the cache. It is very rare that this is large except in Subversion, and we do not need to use this cache in Subversion. In other VCSes, the scale of this data is quite small (a handful of bytes per commit on average).
- D5257 required a large, slow offline computation step. This relies on D9044 to populate parent data so we can build the cache online at will, and let it expire with normal LRU/LFU/whatever semantics. We need this parent data for other reasons anyway.
- D5257 separated graph chunks per-repository. This change assumes we'll be able to pull stuff from APC most of the time and that the cost of switching chunks is not very large, so we can just build one chunk cache across all repositories. This allows the cache to be simpler.
- D5257 needed an offline cache, and used a unique cache structure. Since this one can be built online it can mostly use normal cache code.
- This also supports online appends to the cache.
- Finally, this has a timeout to guarantee a ceiling on the worst case: the worst case is something like a query for a file that has never existed, in a repository which receives exactly 1 commit every time other repositories receive 4095 commits, on a cold cache. If we hit cases like this we can bail after warming the cache up a bit and fall back to asking the VCS for an answer.
This cache isn't perfect, but I believe it will give us substantial gains in the average case. It can often satisfy "average-looking" queries in 4-8ms, and pathological-ish queries in 20ms on my machine; `hg` usually can't even start up in less than 100ms. The major thing that's attractive about this approach is that it does not require anything external or complicated, and will "just work", even producing reasonble improvements for users without APC.
In followups, I'll modify queries to use this cache and see if it holds up in more realistic workloads.
Test Plan:
- Used `bin/repository cache` to examine the behavior of this cache.
- Did some profiling/testing from the web UI using `debug.php`.
- This //appears// to provide a reasonable fast way to issue this query very quickly in the average case, without the various issues that plagued D5257.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley, jhurwitz
Maniphest Tasks: T2683
Differential Revision: https://secure.phabricator.com/D9045
Summary: See D5657. Also cleans up the namespacing stuff a little bit.
Test Plan: Disabled APC and verified that setup checks didn't run normally, but did run after restart and on `/config/issue/`.
Reviewers: vrana
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D5658
Summary:
Submoduling is slightly convenient for developers but hellishly difficult for many users. Since we make about a dozen updates to Javelin per year, just include the source directly.
Even if we run `git submodule status` more often, this creates additional problems for users with PATH misconfigured.
Fixes T2062 by nuking it from orbit.
Test Plan: Loaded site, browsed around. Grepped for references to submodules.
Reviewers: btrahan, vrana
CC: aran
Maniphest Tasks: T2062
Differential Revision: https://secure.phabricator.com/D4581
Summary:
- When a setup issue is nonfatal (i.e., a warning), instruct the user to edit the value from the web UI instead of using `bin/config`.
- When the user edits configuration in response to a setup issue, send them back to the issue when they're done.
- When an issue relates to PHP configuration, link to the PHP documentation on configuration.
- Add new-style setup check for timezone issues.
Test Plan: Mucked with my timezone config, resolved the issues I created.
Reviewers: codeblock, btrahan, vrana
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2221, T2228
Differential Revision: https://secure.phabricator.com/D4298
Summary:
See T2062. This cache allows us to essentially implement this sort of block:
if (this_code_has_not_run_since_the_last_server_restart()) {
...
}
This will let us do setup checks automatically (i.e., without a specialized setup mode) without imposing hundreds of milliseconds of `git submodule status` and similar checks on every page load, even if an install does not have APC.
Broadly, the major goals here are:
- Reduce user errors and support costs related to misconfiguration (e.g., failure to update submodules).
- Simplify setup and configuration (remove 'phabricator.setup', remove/reduce PHABRICATOR_ENV).
- Move as much configuration to the web as possible (required for SaaS).
Test Plan:
Added this block to webroot/index.php:
$cache = PhabricatorCaches::getSetupCache();
$result = $cache->getKeys(array('x'));
if (empty($result['x'])) {
phlog('Cache miss + set.');
$cache->setKeys(array('x' => 'y'));
} else {
phlog('Cache hit.');
}
Verified it used APC correctly.
Disabled APC and verified it degraded to a reasonable disk-based behavior.
If we miss both of these we end up with no actual caching, but that's the best we can do. This code will also run too early in setup for it to be appropriate to raise exceptions out of this pathway -- later on, we can raise a warning that APC is not installed.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2227, T2062
Differential Revision: https://secure.phabricator.com/D4281
