Summary:
Ref T10759. Check master/replica status during startup.
After D16903, this also means that we check this status after a database comes back online after being unreachable.
If a master is replicating, fatal (since this can do a million kinds of bad things).
If a replica is not replicating, warn (this just means the replica is behind so some data is at risk).
Also: if your masters were actually configured properly (mine weren't until this change detected it), we would throw away patches as we applied them, so they would only apply to the //first// master. Instead, properly apply all migration patches to all masters.
Test Plan:
- Started Phabricator with a replicating master, got a fatal.
- Stopped replication on a replica, got a warning.
- With two non-replicating masters, upgraded storage.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10759
Differential Revision: https://secure.phabricator.com/D16904
Summary:
Ref T10759. We may "discover" the presence of a fatal setup error later, after starting Phabricator.
This can happen in a few ways, but most are unlikely. The one I'm immediately concerned about is:
- Phabricator starts up during a disaster with some databases unreachable.
- We start with warnings (unreachable databases are generally not fatal, since it's OK for some subset of hosts to be down in replicated/partitioned setups).
- The unreachable databases later recover and become accessible again.
- When we run checks against them, we discover that they are misconfigured.
Currently, "fatal" setup issues are not truly fatal if we're "in flight" -- we've survived setup checks at least once in the past. This is bad in the scenario above.
Especially with partitioning, it could lead to mangled data in a disaster scenario where operations staff makes a small configuration mistake while trying to get things running again.
Instead, if we "discover" a fatal error while already "in flight", reset the whole setup process as though the webserver had just restarted. Don't serve requests again until we can make it through setup without hitting fatals.
Test Plan:
- Started Phabricator with multiple masters, one of which was down and broken.
- Got a warning about the bad master.
- Revived the master.
- Before: Phabricator detects the fatal, but keeps serving requests.
- After: Phabricator detects the fatal, resets the webserver, and stops serving requests until the fatal is resolved.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10759
Differential Revision: https://secure.phabricator.com/D16903
Summary:
Ref T10759. Currently, these checks run only against configured masters. Instead, check every host.
These checks also sort of cheat through restart during a recovery, when some hosts will be unreachable: they test for "disaster" by seeing if no masters are reachable, and just skip all the checks in that case.
This is bad for at least two reasons:
- After recent changes, it is possible that //some// masters are dead but it's still OK to start. For example, "slowvote" may have no master, but everything else is reachable. We can safely run without slowvote.
- It's possible to start during a disaster and miss important setup checks completely, since we skip them, get a clean bill of health, and never re-test them.
Instead:
- Test each host individually.
- Fundamental problems (lack of InnoDB, bad schema) are fatal on any host.
- If we can't connect, raise it as a //warning// to make sure we check it later. If you start during a disaster, we still want to make sure that schemata are up to date if you later recover a host.
In particular, I'm going to add these checks soon:
- Fatal if a "master" is replicating.
- Fatal if a "replica" is not replicating.
- Fatal if a database partition config differs from web partition config.
- When we let a database off with a warning because it's down, and later upgrade it to a fatal because we discover it is broken after it comes up again, fatal everything. Currently, we keep running if we "discover" the presence of new fatals after surviving setup checks for the first time.
Test Plan:
- Configured with multiple masters, intentionally broke one (simulating a disaster where one master is lost), saw Phabricator still startup.
- Tested individual setup checks by intentionally breaking them.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10759
Differential Revision: https://secure.phabricator.com/D16902
Summary:
Fixes T11902.
- Periods now work in short names.
- If you try to name something ".git", no dice.
Test Plan:
- Tried to name something "quack.git", was politely rejected.
- Named something "quack.notgit", and it worked fine.
- Cloned Mercurial and Git repositories over SSH with ".git" and non-".git" variants without hitting any issues.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11902
Differential Revision: https://secure.phabricator.com/D16908
Summary:
Ref T11044. I'm going to hold this until after the release cut, but I think it's good to go.
This allows installs to configure multiple masters in `cluster.databases` and partition applications across them (for example, put Maniphest on a dedicated database).
When we make a Maniphest connection we go look up which master we should be hitting first, then connect to it.
This has at least approximately been planned for many years, so the actual change is largely just making sure that your config makes sense.
Test Plan:
- Configured `db001.epriestley.com` and `db002.epriestley.com` as master/master.
- Partitioned applications between them.
- Interacted with various applications, saw writes go to the correct host.
- Viewed "Database Servers" and saw partitioning information.
- Ran schema upgrades.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11044
Differential Revision: https://secure.phabricator.com/D16876
Summary:
Ref T11893. Previously, we excuted all `bin/storage` queries through `StorageManagementAPI` objects.
After D16848, we execute some queries through `PhabricatorDatabaseRef`. However, the refs we use weren't getting passed the `-u` / `-p` flags correctly, for specifying alternate administrative credentials.
Test Plan:
- Created a second account (`trunk`).
- Ran `bin/storage -u trunk`.
- Made libphutil throw when not connecting as that user.
- Before patch: some connections incorrectly used the default user, "root".
- After patch: all connections correctly used the configured user, "trunk".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11893
Differential Revision: https://secure.phabricator.com/D16901
Summary: Background is now always white, spacing in header is more consistent
Test Plan: test mobile, table, desktop application search apps.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16691
Summary:
Ref T11706. Add some casts so we don't return `"0"` for `false`.
Also I forgot to document one of the things.
Test Plan: Called `calendar.event.search`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11706
Differential Revision: https://secure.phabricator.com/D16690
Summary:
`DrydockAuthorizationSearchEngine` was being used solely to display authorizations for a specific blueprint from the web UI and consequently expected that callers set a specific blueprint before performing a query. Here we check to see if a blueprint has been set in cases where the engine could be operating from either Conduit or the web.
Ref T11694
Test Plan:
- called the API method from the console
- approved an authorization
- followed the "view all" link from a blueprint page
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Maniphest Tasks: T11694
Differential Revision: https://secure.phabricator.com/D16592
Summary: We have more space here for last 8.
Test Plan: Reload, see 8.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16689
Summary: Fixes T11706. I think this approach (roughly: provide the information in a few different formats) is generally reasonable, and should let clients choose how much date/time magic they want to do.
Test Plan: Called `calenadar.event.search`, viewed results.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11706
Differential Revision: https://secure.phabricator.com/D16688
Summary:
Fixes T11746. The opcache docs are on a different page, so point there if we're raising opcache issues.
(It's possible for a setup issue to say "configure X, or configure Y", where X is opcache and Y is non-opcache, so we may want to render both links.)
Test Plan: {F1867109}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11746
Differential Revision: https://secure.phabricator.com/D16685
Summary: Fixes T11745. I just missed this while juggling some of the internal storage.
Test Plan: Created a new event with recurrence behavior.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11745
Differential Revision: https://secure.phabricator.com/D16684
Summary:
Ref T10747. This adds disable/enable to exports.
Mostly useful if you leak a URI by accident.
Test Plan:
- Disabled and enabled exports.
- Verified that disabled exports don't actually export any data.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10747
Differential Revision: https://secure.phabricator.com/D16681
Summary:
Ref T10747. This explains how exports work.
Also make mail exports use the same logic as other stuff.
Test Plan: Read documentation. Did some exports.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10747
Differential Revision: https://secure.phabricator.com/D16680
Summary:
Ref T10747. This:
- Exports recurring events properly, with RRULE + RECURRENCE-ID.
- When exporting a part of an event series, export the whole series to ICS so it is represented faithfully.
- Make the subscribable URL for "Export" objects work.
Test Plan:
- Downloaded the ".ics" for a normal event, imported it into Calendar.app and Google Calendar.
- Downloaded the ".ics" for a recurring event, imported it into Calendar.app and Google Calendar.
- Defined an ".ics" Export of my events, subscribed to them in Calendar.app.
- Edited an event in Phabricator.
- Hit {key Command R} in Calendar.app, saw changes. (MAGIC!)
- This export included recurring events, which appeared the same way in Calendar.app and Phabricator.
- Can't import into Google Calendar from my local install easily since Google's servers can't hit my laptop, but I'll test once we deploy.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10747
Differential Revision: https://secure.phabricator.com/D16679
Summary:
Ref T10747.
- Adds a "Use Results..." dropdown to query result pages, with actions you can take with search results (today: create export; in future: bulk edit, export as excel, make dashboard panel, etc).
- Allows you to create an export against a query key.
- I'm just using a text edit field for this for now.
- Fleshes out export modes. I plan to support: public (as though you were logged out), privileged (as though you were logged in) and availability (event times, but not details).
This does not actually export stuff yet.
Test Plan: Created some exports. Viewed and listed exports.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10747
Differential Revision: https://secure.phabricator.com/D16676
Summary:
Ref T10747. Rough flow is:
- Run a query.
- Select a new "Export Events..." action.
- This lets you define an "Export", which has a unique URL you can paste into Google Calendar or Calendar.app or whatever.
Most of this does nothing yet but here's the boilerplate.
Test Plan: Doesn't do anything yet.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10747
Differential Revision: https://secure.phabricator.com/D16675
Summary:
Ref T11326. This reorders sections:
- Description (if present)
- Recurring event series info (if recurring)
- Invitees (this also has custom stuff, if it exists)
Test Plan: Viewed some events, saw more sensible order.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11326
Differential Revision: https://secure.phabricator.com/D16671
Summary:
Ref T10747.
- Store recurrence as RRULEs internally.
- Use RRULE constants.
- Migrate existing rules to RRULEs.
Test Plan: Ran migration, nothing seemed broken?
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10747
Differential Revision: https://secure.phabricator.com/D16670
Summary: Ref T10747. This drives event queries through RRULE, too.
Test Plan: Created recurring events, saw them appear correctly on the calendar.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10747
Differential Revision: https://secure.phabricator.com/D16668
Summary:
Ref T10737. Today, we evalute recurrence twice: once when querying, and once in all other cases. This converts the second case to use the RRULE engine.
Next up is making the query use the RRULE engine, too.
Test Plan: Created a new recurring event, iterated through it by clicking "next instance", viewed it on Calendar view.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10737
Differential Revision: https://secure.phabricator.com/D16667
Summary:
Ref T10747. This deprecates "dateFrom", "dateTo", "allDayDateFrom", "allDayDateTo", and "recurrenceEndDate".
They are replaced with "utc*Epoch" fields (for querying) and CalendarDateTime objects (for start, end, until). These objects can represent the full range of dates and times expressible in ICS format, allowing us to import a wider range of ICS events.
Test Plan:
Ran migrations, viewed/edited Calendar, didn't catch anything catastrophcially broken.
This likely needs some followups, I'll keep it local for a bit until I'm confident I didn't break anything too catastrophically. I'm retaining the old data for now so we can likely fix things if it turns out there is some sort of issue.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10747
Differential Revision: https://secure.phabricator.com/D16664
Summary: Ref T10747. Moves away from getDateFrom() / getDateTo() and makes a few more date/time methods more consistent.
Test Plan: Created, edited, viewed events.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10747
Differential Revision: https://secure.phabricator.com/D16663
Summary: Ref T10747. The CalendarDateTime object now carries the viewer timezone as part of its state, so we don't need to have separate accessors.
Test Plan:
- Viewed events, checked that crumbs render properly.
- Edited events.
- Created new events.
- Viewed calendar.
- Viewed event detail pages.
- Viewed profile mini-calendar.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10747
Differential Revision: https://secure.phabricator.com/D16662
Summary:
Ref T10747. This does double-writes and starts generating/writing CalendarDateTimes.
This greater flexibility is necessary to support the full range of ICS-specifiable events, including "floating" events.
This doesn't do anything yet.
Test Plan: Created and edited events, verified sensible representations of corresponding datetimes appeared in the database.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10747
Differential Revision: https://secure.phabricator.com/D16661
Summary:
Ref T10747. Currently, Calendar events are mostly epoch-based and cheat a little bit for all-day events.
This already felt a little flimsy, and can't reasonably accommodate the full range of `.ics` events, which include "floating" events (e.g., occurs at 3PM regardless of timezone, like "Tea Time").
As a secondary issue, we identify instances of a recurring event by instance number (1, 2, 3, etc.). This can't accommodate the full range of `.ics` events, which include arbitrary additional "RDATE" events (e.g., recurrs every week, and also on these specific extra days).
However, we do need to store some epoch information so we can do query windowing: when the user looks at "October 2016", we want to select the smallest number of events that we can from the database initially, before refining them down to generate instances. We can't reasonably query the actual dates no matter how we store them because this depends on computing things like UNTIL, COUNT, initial dates, whether events are recurring or not, timezones, etc.
Instead, when we save an event compute the earliest second it occurs on in UTC and the latest second it occurs on in UTC. We can then query for a small superset of possible events in "October 2016" for any viewer pretty easily.
Also, start laying the groundwork for using fewer epochs in the rest of the code, and for reducing the role of sequence indexes (I plan to keep some sequences indexes around, probably, since they're nice in the UI, but not all child events will have indexes since there's no index for an RDATE event).
This doesn't migrate existing events yet or actually read these new columns -- that will come later once the new code is a little more solid.
Test Plan:
- Ran `bin/storage upgrade`.
- Created a new event.
- Saved an existing event.
- Viewed database, saw sensible-looking "UTC Epoch" values.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10747
Differential Revision: https://secure.phabricator.com/D16652
Summary: This color needs to be fixed since we want the collapse icon over the menu.
Test Plan: Shrink window so area has to scroll, see collapse above the rest of the menu.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16674
Summary: Removes the special CSS to change the sidebar when the header is called. Also switched to using a more standard background color. I'd also like to make collapsed the default, but can't find best way to do that.
Test Plan: Vist profile, projects, collapse and open nav, try a workboard color. Still all good.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16673
Summary: This moves room pictures out of the dialog and into it's own PictureController. Also adds a standard image (and removes the "last person to chat" picture (though we could add that back. My plan is though that direct messages use auto use the other person's photo, after we have editengine and room pictures will have a plain, replaceable image.
Test Plan: Set a new room picture, remove a picture. Run migration, see old images properly set with new image.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11730
Differential Revision: https://secure.phabricator.com/D16669
Summary: Ref T11730. Removes the front end crop feature. Will follow up with proper removal, but this seems broken outright.
Test Plan:
Edit a room, don't seen "Crop" feature. Upload new photo, works fine.
- grep for `ConpherencePicCropControl`
- grep for `aphront-crop`
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11730
Differential Revision: https://secure.phabricator.com/D16665
Summary: This adds the room image to the main header in full Conpherence. It's nice, plus I plan to move the image edit workflow to it to simplify the move to EditEngine. I plan to build some default images for Conpherence which should be better about denoting the room, not just the last person writing.
Test Plan: Click on lots of rooms with and without topics.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16666
Summary: Not sure this ever worked correctly, but now once we have a supported action, skip the rest of the transactions. Currently you'll see a random old post.
Test Plan: Test multiple rooms in various states with new messages, edits, new room titles, etc.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16660
Summary: This probably stopped working when we switch to a standard nav view. Re-scope CSS. Also make scrolling to last room a little easier.
Test Plan: Make 20 rooms, see the old ones vanish. Click See More, scroll to bottom, click last room
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16656
Summary: Unclear these are worth sending, but mostly seems useful. Returns `getTitle` for the transaction if it's not a message. Fixes T10683
Test Plan: Leave rooms, change names, add pictures.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10683
Differential Revision: https://secure.phabricator.com/D16658
Summary: Provide higher resolution for Conpherence room images. Fixes T11728
Test Plan:
Upload a new photo, see it pulls in 200px image as background.
{F1858660}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11728
Differential Revision: https://secure.phabricator.com/D16659
Summary: Depending on when packages loaded, this CSS sometimes gets overwritten. Make it more specific and always present.
Test Plan: Reload a lot
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16657
Summary: Remove policy icons from durable column, create a basic nux layout and style.
Test Plan: leave all rooms, pop open chat, see helpful text and button.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16655
Summary:
Fix typo 'Branches' in the panel header for the Diffusion Actions
management panel.
Test Plan: Saw 'Actions' in the panel heading
Reviewers: chad, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16654
Summary: When the durable column is re-opened, scroll user to latest message. Though later we should scroll them to the last read.
Test Plan: Minimize window, reload page, pop up window, see proper scroll position.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16649
Summary: More work to do here on the JS side, but this at least makes sure users with a small chat window have some notification marked that new replies have not been seen.
Test Plan: Open two windows. Window 1 has durable minimized, Window 2 is full conpherence. Send a message from Window 2, see header count in Window 1 increase. Repeat with durable open, see no change in window.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16650
Summary: A bit better styling, this adds an indication icon for if you're connected or not (and later, away, etc).
Test Plan: Test in Notifications menu, Conpherence full, Durable Column.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16647
Summary: Sends and stores additional body classes at the page level. Removes old ones, sets new ones.
Test Plan: home -> application search -> colored workboard -> config -> home with persistent chat open and minimized.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16646
Summary: This exposes the chat window to a larger audience beside people who accidentaly hit `\`.
Test Plan:
Lots of clicks and reloads.
{F1856043}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16643
Summary: Creates a background that renders inside the Quicksand frame, through sorcery.
Test Plan: Turn on Quicksand, visit lots of pages. See correct background colors. This probably blows something up I'm not testing.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16642
