Summary:
Ref T603. Ref T1279. Further improves transaction and policy support for Herald.
- Instead of deleting rules (which wipes out history and can't be undone) allow them to be disabled.
- Track disables with transactions.
- Gate disables with policy controls.
- Show policy and status information in the headers.
- Show transaction history on rule detail screens.
- Remove the delete controller.
- Support disabled queries in the ApplicationSearch.
Test Plan:
- Enabled and disabled rules.
- Searched for enabled/disabled rules.
- Verified disabled rules don't activate.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1279, T603
Differential Revision: https://secure.phabricator.com/D7247
Summary:
Ref T1279. @champo did a lot of this work already; we've been doing double writes for a long time.
Add "double reads" (reading the edge table as both the "relationship" table and as the "reviewer status" table), and migrate all the data.
I'm not bothering to try to recover old reviewer status (e.g., we could infer from transactions who accepted old revisions) because it wold be very complicated and doesn't seem too valuable.
Test Plan:
- Without doing the migration, used Differential. Verified that reads and writes worked. Most of the data was there anyway since we've been double-writing.
- Performed the migration. Verified that everything was still unchanged.
- Dropped the edge table, verified all reviweer data vanished.
- Migrated again, verified the reviewer stuff was restored.
- Did various cc/reviewer/subscriber queries, got consistent results.
Reviewers: btrahan
Reviewed By: btrahan
CC: champo, aran
Maniphest Tasks: T1279
Differential Revision: https://secure.phabricator.com/D7227
Summary:
Ref T1279. This came to me in a dream.
The existing `differential_relationship` table has an `(objectPHID, type)` column, which theoretically is useful for queries like "revisions with X as a reviewer". In practice, I'm not sure it gets used much, but I can get it to show up in at least some query plans.
Add a similar index to the `edge` table. This sequences //before// D7227, which actually migrates the data.
Test Plan:
- Ran `bin/storage upgrade`.
- EXPLAIN'd a bunch of queries against different versions of the schema, this seemed helpful overall.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1279
Differential Revision: https://secure.phabricator.com/D7232
Conflicts:
src/infrastructure/storage/patch/PhabricatorBuiltinPatchList.php
Summary:
Ref T603. Principally, I want to implement the rule "when you upload a file to an object, users must be able to see the object in order to see the file", since I think this is strongly in line with user expectation. For example, if you attach a file to a Conpherence, it should only be visible to members of that thread.
This adds storage for policies, but doesn't do anything interesting with it yet.
Test Plan: Ran `bin/storage upgrade`.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7175
Summary: Ref T3887. Implements storage and editors, but not the actual audio part.
Test Plan: Edited audio, audio behaviors of macros. Transactions and email looked good. Hit error cases.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3887
Differential Revision: https://secure.phabricator.com/D7159
Summary:
Ref T2222. This sequences //before// D7139 and sorts out keys on the table. In particular:
- There was a fairly silly `draft` key modeled after Pholio; drop it.
- Add a `revisionPHID` key. This is queried mostly-transitionally on the revision view screen.
- Add a `changesetID` key. This is queried by a bunch of interfaces that want more surgical results than `revisionPHID` provides.
- Add an `authorPHID, transactionPHID` key. This is queried on the list interface to find pending drafts.
- Add a `legacy` key. This is queried by the feed publisher.
Test Plan: Used the query analyzer to hit all (I think?) of the pages, saw keyed queries.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D7140
Summary: Ref T603. Paves the way for policy controls.
Test Plan: Ran storage upgrade, bumbled around in Differential.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7133
Summary:
Ref T2217. Fixes T3876. We incorrectly have a unique key on `(authorPHID, transactionPHID)`, which prevents saving multiple versions of a comment.
I'm not entirely sure why this exists. I think it came from Pholio (where it works for inlines, because it has an additional component, but maybe should be adjusted) but we might need to wipe it out of more apps too.
Test Plan: Edited a comment in Maniphest.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2217, T3876
Differential Revision: https://secure.phabricator.com/D7102
Summary: Ref T2217. Cleans up the table names. Moves old data to `maniphest_transaction_legacy`. We'll drop that eventually once it's more clear that I didn't break the world.
Test Plan: Did reads/writes to/from these tables.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2217
Differential Revision: https://secure.phabricator.com/D7094
Summary: Ref T2217. Pro is the new standard.
Test Plan: Lots of `grep`, made a pile of Maniphest views/edits.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2217
Differential Revision: https://secure.phabricator.com/D7093
Summary:
Ref T2217. This is the risky, hard part; everything after this should be smooth sailing. This is //mostly// clean, except:
- The old format would opportunistically combine a comment with some other transaction type if it could. We no longer do that, so:
- When migrating, "edit" + "comment" transactions need to be split in two.
- When editing now, we should no longer combine these transaction types.
- These changes are pretty straightforward and low-impact.
- This migration promotes "auxiliary field" data to the new CustomField/StandardField format, so that's not a straight migration either. The formats are very similar, though.
Broadly, this takes the same attack that the auth migration did: proxy all the code through to the new storage. `ManiphestTransaction` is now just an API on top of `ManiphestTransactionPro`, which is the new storage format. The two formats are very similar, so this was mostly a straight copy from one table to the other.
Test Plan:
- Without performing the migration, made a bunch of edits and comments on tasks and verified the new code works correctly.
- Droped the test data and performed the migration.
- Looked at the resulting data for obvious discrepancies.
- Looked at a bunch of tasks and their transaction history.
- Used Conduit to pull transaction data.
- Edited task description and clicked "View Details" on transaction.
- Used batch editor.
- Made a bunch more edits.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2217
Differential Revision: https://secure.phabricator.com/D7068
Summary: Ref T2217. Add the tables and comment class for the new stuff. Not used yet.
Test Plan: Ran storage upgrade, browsed Maniphest.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2217
Differential Revision: https://secure.phabricator.com/D7066
Summary:
- Add some TODO'd keys.
- Add policy fields.
Test Plan: Viewed repositories; created a new repository and verified it got the right default policy settings.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7056
Summary: Ref T3794. Drop auxiliary field, use standard field.
Test Plan: Performed migration, field seemed to survive it intact. Edited and viewed tasks.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3794
Differential Revision: https://secure.phabricator.com/D7036
Summary: Ref T418. Moves data from the Maniphest-specific table to the general one. This patch is a bit gross, but mostly about getting the reads and writes aimed correctly. Future patches will clean things up.
Test Plan: Migrated data across formats. Verified it survied the migration. Viewed and edited tasks' custom fields.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T418
Differential Revision: https://secure.phabricator.com/D6999
Summary: Ref T418. Depends on D6992. This adds index and value storage for Maniphest custom fields.
Test Plan: Ran storage upgrade.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T418
Differential Revision: https://secure.phabricator.com/D6995
Summary:
Ref T2625. Ref T3794. Ref T418. Ref T1703.
This is a more general version of D5278. It expands CustomField support to include real integration with ApplicationSearch.
Broadly, custom fields may elect to:
- build indicies when objects are updated;
- populate ApplicationSearch forms with new controls;
- read inputs entered into those controls out of the request; and
- apply constraints to search queries.
Some utility/helper stuff is provided to make this easier. This part could be cleaner, but seems reasonable for a first cut. In particular, the Query and SearchEngine must manually call all the hooks right now instead of everything happening magically. I think that's fine for the moment; they're pretty easy to get right.
Test Plan:
I added a new searchable "Company" field to People:
{F58229}
This also cleaned up the disable/reorder view a little bit:
{F58230}
As it did before, this field appears on the edit screen:
{F58231}
However, because it has `search`, it also appears on the search screen:
{F58232}
When queried, it returns the expected results:
{F58233}
And the actually good bit of all this is that the query can take advantage of indexes:
mysql> explain SELECT * FROM `user` user JOIN `user_customfieldstringindex` `appsearch_0` ON `appsearch_0`.objectPHID = user.phid AND `appsearch_0`.indexKey = 'mk3Ndy476ge6' AND `appsearch_0`.indexValue IN ('phacility') ORDER BY user.id DESC LIMIT 101;
+----+-------------+-------------+--------+-------------------+----------+---------+------------------------------------------+------+----------------------------------------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra |
+----+-------------+-------------+--------+-------------------+----------+---------+------------------------------------------+------+----------------------------------------------+
| 1 | SIMPLE | appsearch_0 | ref | key_join,key_find | key_find | 232 | const,const | 1 | Using where; Using temporary; Using filesort |
| 1 | SIMPLE | user | eq_ref | phid | phid | 194 | phabricator2_user.appsearch_0.objectPHID | 1 | |
+----+-------------+-------------+--------+-------------------+----------+---------+------------------------------------------+------+----------------------------------------------+
2 rows in set (0.00 sec)
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T418, T1703, T2625, T3794
Differential Revision: https://secure.phabricator.com/D6992
Summary: Ref T2625. EVERYONE LOVES MIGRATIONS!!!
Test Plan:
- Created and migrated a query with every field, verified results were preserved.
- Created and migrated a query using "noproject" and "upforgrabs" magic, verified results were preserved.
Here's the pre-migration "everything" query:
{F58110}
Here it is after migration:
{F58111}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2625
Differential Revision: https://secure.phabricator.com/D6977
Summary: See discussion in D6955. This provides a table we can JOIN against to (effectively) "ORDER BY project name", populates it intially, and keeps it up to date as projects are edited.
Test Plan:
- Ran storage upgrade, verified projects populated into the table.
- Edited a project, verified its entry updated.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6957
Summary: Depends on D6952. Unpunts there since I'm rolling into a swamp full of schema changes.
Test Plan: Issued date-constrained query and saw key as a candidate.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6954
Summary: Noticed this in the schema. "Touches" were an idea that never really got off the ground, as we built out more/better notification channels instead. Essentially, they recorded any object you'd ever interacted with. Maybe this will be useful some day, but for now it does nothing and can't be interacted with. Nuke it.
Test Plan: `grep`, loaded Maniphest.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6953
Summary:
Fixes T3803. Turns out my advice was sort of terrible. :/
In strict mode, the `INSERT INTO x (y, z)` raises an error unless `(y, z, ...)` includes //all// columns without default values.
Test Plan: Ran `storage upgrade` on a strict-mode install. Verified no inserts were performed.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3803
Differential Revision: https://secure.phabricator.com/D6894
Summary: this ends up being a little weird since you can't actually edit files. Also, since we create files all sorts of ways, sometimes without even having a user, we don't bother logging transactions for those events. Fixes T3651. Turns out this work is important for T3612, which is a priority of mine to help get Pholio out the door.
Test Plan: left a comment on a file. it worked! use bin/mail to verify mail content looked correct.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, aran, wez
Maniphest Tasks: T3651, T3612
Differential Revision: https://secure.phabricator.com/D6789
Summary:
Ref T988. This brings the class/interface atomizer over. A lot of parts of this are still varying degrees of very-rough, but most of the data ends up in approximatley the right place.
ALSO: PROGRESS BARS
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T988
Differential Revision: https://secure.phabricator.com/D6817
Summary: Ref T3663. Does what it says on the tin.
Test Plan: Ran `storage upgrade`.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3663
Differential Revision: https://secure.phabricator.com/D6778
Summary: Ref T3663. This is obsolete code which is used only in this migration, which Facebook has already performed and which isn't relevant for any other installs.
Test Plan: `grep`
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3663
Differential Revision: https://secure.phabricator.com/D6777
Summary:
Ref T1702. Ref T3718. There are a couple of things going on here:
**PhabricatorCustomFieldList**: I added `PhabricatorCustomFieldList`, which is just a convenience class for dealing with lists of fields. Often, current field code does something like this inline in a Controller:
foreach ($fields as $field) {
// do some junk
}
Often, that junk has some slightly subtle implications. Move all of it to `$list->doSomeJunk()` methods (like `appendFieldsToForm()`, `loadFieldsFromStorage()`) to reduce code duplication and prevent errors. This additionally moves an existing list-convenience method there, out of `PhabricatorPropertyListView`.
**PhabricatorUserConfiguredCustomFieldStorage**: Adds `PhabricatorUserConfiguredCustomFieldStorage` for storing custom field data (like "ICQ Handle", "Phone Number", "Desk", "Favorite Flower", etc).
**Configuration-Driven Custom Fields**: Previously, I was thinking about doing these with interfaces, but as I thought about it more I started to dislike that approach. Instead, I built proxies into `PhabricatorCustomField`. Basically, this means that fields (like a custom, configuration-driven "Favorite Flower" field) can just use some other Field to actually provide their implementation (like a "standard" field which knows how to render text areas). The previous approach would have involed subclasssing the "standard" field and implementing an interface, but that would mean that every application would have at least two "base" fields and generally just seemed bleh as I worked through it.
The cost of this approach is that we need a bunch of `proxy` junk in the base class, but that's a one-time cost and I think it simplifies all the implementations and makes them a lot less magical (e.g., all of the custom fields now extend the right base field classes).
**Fixed Some Bugs**: Some of this code hadn't really been run yet and had minor bugs.
Test Plan:
{F54240}
{F54241}
{F54242}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1702, T1703, T3718
Differential Revision: https://secure.phabricator.com/D6749
Summary: Ref T3656. Releeph denormalizes branch cut point identifiers into Branch objects, but this information isn't useful or used for sorting, filtering, or enforcing unique constraints. Instead, derive it via noramlized pathways from the `cutPointCommitPHID`.
Test Plan: Ran storage upgrade. Ran `releephwork.getbranch` and `releeph.getbranches`. Grepped for `cutPointCommitIdentifier`.
Reviewers: btrahan
Reviewed By: btrahan
CC: LegNeato, aran
Maniphest Tasks: T3656
Differential Revision: https://secure.phabricator.com/D6636
Summary:
Fixes T3660. Releeph Projects currently have an unused one-to-one mapping to Phabricator projects. This isn't consistent with other applications and has no integrations or uses. Get rid of it.
NOTE: Waiting for signoff from @legneato on T3660 before pulling the trigger here.
Test Plan: Created and edited Releeph projects. Grepped for references to project ID; there are a dozen or so but they're all either Releeph projects or Arcanist projects.
Reviewers: btrahan
Reviewed By: btrahan
CC: LegNeato, aran
Maniphest Tasks: T3660
Differential Revision: https://secure.phabricator.com/D6635
Summary: Ref T3655. Depends on D6633. This removes the writes and the column.
Test Plan: Created a project, edited a project. Verified the table doesn't have any keys including this column.
Reviewers: btrahan
Reviewed By: btrahan
CC: LegNeato, aran
Maniphest Tasks: T3655
Differential Revision: https://secure.phabricator.com/D6634
Summary: Ref T2769. I'm planning to keep this pretty simple, but we have this ad-hoc edit log for rules already and some other mess that we can clean up.
Test Plan: No effect yet; see future changes.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2769
Differential Revision: https://secure.phabricator.com/D6654
Summary: Email replies and subscribers seem to go hand in hand so deploy both at once.
Test Plan: played around with bin/mail. Verified replies posted comments on the paste.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T3650
Differential Revision: https://secure.phabricator.com/D6682
This column has no default value and throws if you have maximum warnings activated:
EXCEPTION: (AphrontQueryException) #1364: Field 'commentVersion' doesn't have a default value...
Auditors: btrahan
Summary: Ref T3650. This adds a create transaction, transactions for metadata (title, langauge, view policy), and comments. Editor is used on all create /edit paths.
Test Plan: made some pastes via web and email - yay. edited pastes - yay. verified txns showed up on pastes and in feed correctly.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T3516, T3650
Differential Revision: https://secure.phabricator.com/D6645
Summary: Ref T3578. I forget if this was an explicit decision or not, but we currently let the same user answer questions multiple times. I think this probably causes more confusion than it provides freedom. In conjunction with other UI issues (commenting being weird, notably), we're seeing some use of answers to comment, which is undesirable. Require each answer's author to be unique. Merge existing nonunique authors' answers.
Test Plan: {F52062}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3578
Differential Revision: https://secure.phabricator.com/D6605
Summary:
Fixes T3579
As a basic overview, this enables the author of a question to open/close a question.
Other bits;
- Add "Open" filter to the builtin queries
- Add "Status" to search form
- Refactor ponder constants
- Add coloured bars for different question statuses
Test Plan:
- Open/Close questions
- Search for some bits
- Use filters
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T3579
Differential Revision: https://secure.phabricator.com/D6590
Conflicts:
src/infrastructure/storage/patch/PhabricatorBuiltinPatchList.php
Summary:
Now you can actually replace an image! Ref T3572. This ended up needing a wee bit of infrastructure to work...
- add replace image transaction to pholio
- add replacesImagePHID to PholioImage
- tweaks to editor to properly update images with respect to replacement
- add edges to track replacement
- expose getNodes on graph query infrastructure to query the entire graph of who replaced who
- move pholio image to new phid infrastructure
Still TODO - the history view should get chopped out a bit from the current view - no more inline comments / generally less functionality plus maybe a tweak or two to make this more sensical.
Test Plan: replaced images and played with history controller a little. works okay.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T3572
Differential Revision: https://secure.phabricator.com/D6560
Summary: Fixes T3557. One thing which made T3557 kind of a mess was the lack of information about progress through temporary failures. Add a column which records a task's last failure time, and surface it in the console.
Test Plan: {F51277}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3557
Differential Revision: https://secure.phabricator.com/D6550
Summary: Ref T2715. Switch Maniphest to the new stuff.
Test Plan: Used `phid.query`; `phid.lookup` to load objects.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2715
Differential Revision: https://secure.phabricator.com/D6516
