Summary:
Ref T12733. In the longer run I'd like to just push this out from the edge, but that currently gets us into trouble since we start bumping into content. On my system, the trackpad scrollbar also expands in size when moused over, so the minimum number of pixels we need to push it out is approximatley 15px. This hits body content and the persistent chat.
For now, just disable this element on trackpad systems.
Test Plan:
Disconnected all USB peripherals, quit and relaunched Safari, saw no objective list.
Reconnected mouse, relaunched Safari, saw objective list.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D17974
Summary: Ref T12616. This makes line range selection use the new code, and removes the remainder of the old "hover a line number" / "select a line range" code.
Test Plan: Hovered line numbers; selected line ranges.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17927
Summary:
Fixes T12567. We currently retry after 2s, 4s, 8s, 16s, ...
If we connected cleanly once, retry the first time right away. There are a bunch of reasonable cases where this will work fine and we don't need to wait. Then we fall back: 0s, 2s, 4s, 8s, ...
Test Plan: {F4911905}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12567
Differential Revision: https://secure.phabricator.com/D17706
Summary: Ref T12568. Ref T12567. Allows you to force a reconnect, and shows the reconnect delay on connection close/failure.
Test Plan: {F4911879}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12568, T12567
Differential Revision: https://secure.phabricator.com/D17705
Summary:
Ref T12573. `JX.Leader` synchronizes the Aphlict connection across multiple windows.
Currently, we only test to see if the leader window has been closed every 16 seconds. Instead, test every 1.5 seconds.
Also, make windows keep trying to become the leader forever. This was removed previously (in D15806) but I think that change decreased robustness here.
Test Plan:
- Opened two windows to the "Realtime" tab in DarkConsole.
- Saw one become the leader and one become a follower.
- (Optionally, wait for 10 seconds here to test the "keep trying to become the leader" behavior.)
- Closed the leader.
- Saw the follower become the leader after ~1.5 seconds.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12573
Differential Revision: https://secure.phabricator.com/D17703
Summary: Fixes T11865. Part of a 'clean up remarkup' pass, removing Aleo helps simplify coding, is lighter on the wire, and gives a more consistent, clean look.
Test Plan: run celerity, grep for 'aleo' and 'Aleo', test Phriction, tasks
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11865
Differential Revision: https://secure.phabricator.com/D17535
Summary: Adds most up to date version of FontAwesome
Test Plan: {icon snowflake-o}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17293
Summary:
Ref T8510. Use "\n" as a delimiter between name sections. Specifically, project "AAA" with tag "zzz" should be a better match for query "AAA" than project "AAA BBB" is.
Make use of this delimiter slighlty more obvious in the UI.
Test Plan:
- Created projects "Phacility" and "Phacility Core Access".
- Typed "Phacility".
- Before patch: first hit is "Phacility Core Access".
- After patch: first hit is "Phacility".
- Viewed debugging output table, saw visual explanation of behavior.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8510
Differential Revision: https://secure.phabricator.com/D16886
Summary:
Ref T8510. We had two issues with mixed-case result sorting, like typing `@joe` to match user `Joe`.
- The fallback sort was not normalized properly, so "J" could sort after "j". Instead, normalize values for sorting.
- The `prefix_hits` and older `priority_hits` mechanisms were competing destructively. The `prefix_hits` mechanism completely replaces the `priority_hits` mechanism. Instead, use only the `prefix_hits` mechanism.
Test Plan:
- Copied results for "joe" from WMF.
- Hard-coded the controller to return them.
- Searched for `@joe`.
- After patches, first hit is user "Joe".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8510
Differential Revision: https://secure.phabricator.com/D16826
Summary: Ref T11034. Ref T4788. This allows you to resize the typeahead browse dialog if you want. I plan to let you resize the object selector dialog in the future.
Test Plan: {F1695433}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4788, T11034
Differential Revision: https://secure.phabricator.com/D16156
Summary:
Ref T8510. Sort prefix matches above non-prefix matches, so that "Ape Discovery" does not match "discovery" better than "Discovery".
Sort functions last.
Rename function internal strings so they don't get over-promoted the prefix-match rules.
Add kind of a hack to get "Project X" sorting above all the "Project X (Milestone 1)" results.
Test Plan:
Created "Ape Discovery", "Baboon Discovery", "Chimpanzee Discovery", etc.
Main project now sorts above milestones:
{F1681773}
Prefix matches now sort above other matches:
{F1681774}
Function results (rarely used) are now less prominent:
{F1681775}
Better function results here:
{F1681776}
More function results:
{F1681777}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8510
Differential Revision: https://secure.phabricator.com/D16094
Summary:
Ref T5187. This definitely feels a bit flimsy and I'm going to hold it until I cut the release since it changes a couple of things about Workflow in general, but it seems to work OK and most of it is fine.
The intent is described in T5187#176236.
In practice, most of that works like I describe, then the `phui-file-upload` behavior gets some weird glue to figure out if the input is part of the form. Not the most elegant system, but I think it'll hold until we come up with many reasons to write a lot more Javascript.
Test Plan:
Used both drag-and-drop and the upload dialog to upload files in Safari, Firefox and Chrome.
{F1653716}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5187
Differential Revision: https://secure.phabricator.com/D15953
Summary:
We're sometimes getting duplicate notifications right now. I think this is because multiple windows are racing and becoming leaders.
Clean this up a little:
- Fix the `timeoout` typo.
- Only try to usurp once.
- Use different usurp and expire delays, so we don't fire them at the exact same time.
Not sure if this'll work or not but it should theoretically be a little cleaner.
Test Plan:
- Quit Safari, reopened Safari, still saw a fast reconnect to the notification server (this is the goal of usurping).
- Did normal notification stuff like opening a chat in two windows, got notifications.
- Hard to reproduce the race for sure, but this at least fixes the outright `timeoout` bug.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15806
Summary:
Fixes T10697. This finishes bringing the rest of the config up to cluster power levels.
Phabricator is now given an arbitrarily long list of notification servers.
Each Aphlict server is given an arbitrarily long list of ports to run services on.
Users are free to make them meet in the middle by proxying whatever they want to whatever else they want.
This should also accommodate clustering fairly easily in the future.
Also rewrote the status UI and changed a million other things. 🐗
Test Plan:
{F1217864}
{F1217865}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10697
Differential Revision: https://secure.phabricator.com/D15703
Summary:
Fixes T10302. I think we had fixed-width dialog containers in the past (?) but they all handle their own centering now.
This was causing them to be slightly off-center as a result, and creating the 7px issue in T10302.
Test Plan:
- Viewed a wide dialog (task edit).
- Viewed a narrow dialog (notification dismissal confirmation).
- Viewed dialogs on wide/narrow screens.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10302
Differential Revision: https://secure.phabricator.com/D15529
Summary:
Mostly, this has just been sitting in my sandbox for a long time. I may also touch some charting stuff with subprojects/milestones, but don't have particular plans to do that.
D3 seems a bit more flexible, and it's easier to push more of the style logic into CSS so you can fix my design atrocities. gRaphael also hasn't been updated in ~3+ years.
Test Plan:
{F1085433}
{F1085434}
Reviewers: chad
Reviewed By: chad
Subscribers: cburroughs, yelirekim
Differential Revision: https://secure.phabricator.com/D15155
Summary:
Fixes T10229. Broadly:
- When the user hovers over a line number or inline comment, we update the yellow reticle to highlight the relevant lines. Specifically, this is in response to a `mouseover` event.
- On touch devices, touches fire `mouseover` and if you mutate the DOM inside the event, the device aborts the touch.
To remedy this:
- Distingiush between mouse-originated and touch-originated cursor events.
- We do this, roughly, by setting a flag when we see "touchstart", and clearing it when we see the second copy of any unique cursor event.
- This method is complex, but should be robust to any implementation differences between devices (for example, it will work no matter which order the events are fired in).
- This method should also produce the correct results on weird devices that have both mouse-devices and touch-devices available for cursor input.
- When we see a touch-originated `mouseover` or `mouseout`, don't mutate the DOM.
- Put an extra DOM mutation into the `click` event to improve highlighting behavior on touch devices.
Test Plan:
- In iOS Simulator (4s, iOS 9.2), clicked various inline actions ("Reply", "Hide", "Done", "Cancel", line numbers, etc). Got responses after a single touch.
- Verified hover + click behavior on a desktop.
- Logged and examined a bunch of events as a general sanity check.
Reviewers: chad
Reviewed By: chad
Subscribers: aljungberg
Maniphest Tasks: T10229
Differential Revision: https://secure.phabricator.com/D15136
Summary:
Ref T10163. When we think the user has finished typing a word (because they typed a space, period, or other similar characters) and nothing else they might type could possibly change the outcome (usually because the words they have typed already match nothing), just deactivate the autocomplete.
As a special case, if the word they have typed already select exactly one result, //and// they have already typed exactly that result, assume they just typed it from memory and deactivate.
Test Plan:
- Typed `@dog qwer zxcv` and saw autocomplete deactivate on the space before `z` (on my local install, `@dog` is ambiguous but `@dog qwer` matches nothing).
- Typed `@epriestley ` and saw autocomplete deactivate on space.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10163
Differential Revision: https://secure.phabricator.com/D15039
Summary: Fixes T9871. Ref T10004. These won't win any awards but it fixes them being incredibly weird and confusing.
Test Plan:
{F1029090}
- Tried to use controls, got reasonable behavior.
- Used normal controls to make sure I didn't break anything.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9871, T10004
Differential Revision: https://secure.phabricator.com/D14814
Summary:
Ref T10004. After a user logs in, we send them to the "next" URI cookie if there is one, but currently don't always do a very good job of selecting a "next" URI, especially if they tried to do something with a dialog before being asked to log in.
In particular, if a logged-out user clicks an action like "Edit Blocking Tasks" on a Maniphest task, the default behavior is to send them to the standalone page for that dialog after they log in. This can be pretty confusing.
See T2691 and D6416 for earlier efforts here. At that time, we added a mechanism to //manually// override the default behavior, and fixed the most common links. This worked, but I'd like to fix the //default// beahvior so we don't need to remember to `setObjectURI()` correctly all over the place.
ApplicationEditor has also introduced new cases which are more difficult to get right. While we could get them right by using the override and being careful about things, this also motivates fixing the default behavior.
Finally, we have better tools for fixing the default behavior now than we did in 2013.
Instead of using manual overrides, have JS include an "X-Phabricator-Via" header in Ajax requests. This is basically like a referrer header, and will contain the page the user's browser is on.
In essentially every case, this should be a very good place (and often the best place) to send them after login. For all pages currently using `setObjectURI()`, it should produce the same behavior by default.
I'll remove the `setObjectURI()` mechanism in the next diff.
Test Plan: Clicked various workflow actions while logged out, saw "next" get set to a reasonable value, was redirected to a sensible, non-confusing page after login (the page with whatever button I clicked on it).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10004
Differential Revision: https://secure.phabricator.com/D14804
Summary:
Fixes T9984. When a tokenizer only allows one selection (like "Task Owner:" or "Land Onto Branch:"), keep the browse button active but have it //replace// values.
Also, have "Create Subtask" default to the system default status, so subtasks of closed tasks are not also closed.
Test Plan:
- Browsed an empty limit=1 tokenizer.
- Replaced a full limit=1 tokenizer.
- Browsed an empty no-limit tokenizer.
- Browsed more tokens into the no-limit tokenizer.
- Typed some tokens normally.
- Created a subtask of a closed task.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9984
Differential Revision: https://secure.phabricator.com/D14785
Summary: Ref T7858. Don't let users add multiple values to single-value tokenizers by using the "Browse" button.
Test Plan:
- Added a token, browse button was disabled.
- Removed the token, browse button was enabled again.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7858
Differential Revision: https://secure.phabricator.com/D14738
Summary: New icons
Test Plan: Use new icons
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14568
Summary: These fonts are functionally very similar, but in diagnosing a problem with mobile Safari/Chrome, it turned out that our use of "bold" with the "normal" font build created a "semibold" look when on desktop and a "normal" look on mobile. The "semibold" feel is more important, so finding a lighter "bold" font was the impetus for this font switch. As it turns out **Aleo** is built by the same author as **Lato** (our other font) and is intended as it's companion. So stylistically, this is the more correct font.
Test Plan:
Test Phriction, Legalpad, Diviner, Desktop and Mobile
{F938013}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14391
Summary: Generated Roboto Slab with the same settings as Lato, which produces a smaller file. Also hope it fixes mobile kerning.
Test Plan: View various documents, fonts look identical.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14388
Summary:
Fixes T8919. In Safari, `node.href = null;` has no effect, but in Chrome it is like `node.href = "null";`.
Instead, just use semantics similar to `phutil_tag()`: don't assign attributes with `null` values.
Test Plan:
No more `/null` href in Chrome in Owners typehaead.
Typeahead still works in Chrome/Safari.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8919
Differential Revision: https://secure.phabricator.com/D14021
Summary: New Calendar icons!
Test Plan: Try new icons. See new icons.
Reviewers: lpriestley, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D13761
Summary:
About 1/3 the size. The "Full" Lato set is over 3000 Glyphs, this was a handbuilt set of Latin, Latin-A, and Latin-B. Specific Unicode set:
```U+0100-024F, U+1E00-1EFF, U+20A0-20AB, U+20AD-20CF, U+2C60-2C7F, U+A720-A7FF, U+0000-00FF, U+0131, U+0152-0153, U+02C6, U+02DA, U+02DC, U+2000-206F, U+2074, U+20AC, U+2212, U+2215, U+E0FF, U+EFFD, U+F000```
This unicode set is what Google Fonts uses as "Latin,Latin-Ext"
Test Plan: Built test pages in Phriction for Latin-A, Latin-B. Checked Chrome, Firefox, Mac and PC. If issues get reported, can default back to larger font pack.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T8755
Differential Revision: https://secure.phabricator.com/D13558
Summary: Rebuilt Lato font for Firefox, x-height to 100%. Ref T8755
Test Plan: Test Firefox //without// having a local copy of Lato installed on my Mac.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T8755
Differential Revision: https://secure.phabricator.com/D13556
Summary: Ref T8755, Adds full fallback support for Lato, the default Phabricator font and champion of Azeroth.
Test Plan: Verify fonts are being used everywhere as expected.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T8755
Differential Revision: https://secure.phabricator.com/D13553
Summary: Ref T8755. Hunting down some display issues with the fonts on certain computers (Ubuntu, Windows, Chrome Mobile). Hopefully having the full font fallback tree will resolve the issues.
Test Plan: Review Phriction on my Mac, no distinguishable difference. Will test Ubuntu after it lands.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T8755
Differential Revision: https://secure.phabricator.com/D13552
Summary: Ref T8099, Moving to Roboto Slab for Document Headers. It's a little less serif-y and fits well with Lato. Also took a pass at cleaning up edge cases in Documents, Diviner, Phriction, Legalpad, and Welcome Screen.
Test Plan: Test Phriction, Diviner, Legalpad, Welcome Screen
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T8099
Differential Revision: https://secure.phabricator.com/D13439
Summary: Ref T8099, Instead of Latin subset, this uses full 3000+ Glyph set for rendering.
Test Plan: Test a few various languages in my Phriction documents.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T8099
Differential Revision: https://secure.phabricator.com/D13437
Summary: Couple of reasons here. Mainly, we're looking at Serif fonts for Phacility, so having headers tie back seems worth exploring. Also Oswals was a bit heavy, and in trying to find a replacement with similiar distinction, was unable to find anything suitable. Trying out Slabo here and have been pleasantly surprised how well the Serif/Sans-Serif combination works here, typographically.
Test Plan:
Test Objects, Documents, and Dashboards.
{F500207}
{F500208}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D13279
Summary: Working towards a more unified look and feel. This brings in Lato as a complete base font over Helvetica Neue, as well as removing Source Sans Pro from DocumentView and Conpherence. Design-wise Lato provides the nice readability at larger font sizes that Source Sans Pro did, with the ability to scale down to tables and UI widgets with ease. This gives us one font instead of two, and now Object descriptions and Timeline posts all can benefit from a consistent, readable font.
Test Plan:
Test main UI, smaller elements like tables, menus, DocumentViews, Previews, Conpherence.
{F498135}
{F498136}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D13276
Summary: Ref T8099, I want to live with this for a few weeks. I've grow to like that it gives more distinction to ObjectBox Headers and fits very nicely as headers in DocumentView. Even if we don't use them for all headers, Documents are much nicer to me at least with a more visually impactful font (Source Sans doesn't make a great header).
Test Plan:
Review dashboards, objects, Diviner, Phriction, Legalpad, and misc other pages.
{F466410}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T8099
Differential Revision: https://secure.phabricator.com/D13127
Summary: Using `##` can cause some formatting issues, see D13071.
Test Plan: See D13071.
Reviewers: epriestley, #blessed_reviewers, chad
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D13072
Summary:
Refs T8302.
V1 of the implementation. This replaces the previous mode, but I guess there's no real reason we can't have
some symbols always clickable and the rest require modifier.
I'm also a little concerned about discoverability; Holding down ctrl/cmd will make the cursor change, so there's
some hint that something might be up, but that's probably not obvious enough.
Test Plan:
Tested in diffusion and differential and differential comments on:
- Windows/Chrome,
- Windows/IE 11
- LInux/Firefox 38
- Mac/Chrome
- Mac/Safari
Reviewers: chad, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley, joshuaspence
Maniphest Tasks: T8302
Differential Revision: https://secure.phabricator.com/D13034
Summary:
Ref T8151. This is option (5). It needs a few adjustments but feels pretty good. Major issues are:
- Without a mouse, the scrollbars overlap by default, so we //must// move the column off the right margin.
- Scrolling sometimes "bleeds" between the chat vs the main frame in a way that's not as discrete as the old framed content, but feels generally reasonable to me.
If we pursue this, I'd plan to make these additional changes:
- Move the panel away from the right margin only if the page scrollbars are zero-width (i.e., in OSX trackpad mode).
- Fix the notch in the upper right corner when the chat is moved away from the right margin.
- Probably remove the body "overflow-y: scroll" on Conpherence and Workboards.
- Update the resizing code to deal with 300px vs 315px widths.
- We can probably clean up some JX.Scrollbar "main panel" code.
Here's the "bad" case, where I've visually separated the column to provide room for a scrollbar. This isn't ideal, but looks and feels OK to me:
{F398375}
Test Plan:
- Tried Firefox, Chrome, Safari, with and without a mouse.
- Tried normal Conpherence.
Reviewers: btrahan, chad
Reviewed By: btrahan
Subscribers: avivey, epriestley
Maniphest Tasks: T8151
Differential Revision: https://secure.phabricator.com/D12789
Summary: Fixes T8036. In addition to making the mock edit work, this tightens quicksand code such that the correct page id is returned even if start() has not been called yet. It also tightens mock view where some functions should respect statics.enabled a bit more.
Test Plan:
clicked edit mock, mock crumb, edit mock, mock crum, edit mock, made edits and they worked! clicked edit mock, mock crumb, edit mock, mock crumb, edit mock, profile icon, hit browser back to edit mock, made edits and they worked!
also observed mock view page not occasionally wigging out from image_onload race not having statics.enabled respect during the above
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T8036
Differential Revision: https://secure.phabricator.com/D12739
Summary:
Fixes T7919. This is a pretty generic toggle behavior. Make it quicksand ready by making it install only once and swallow the regular "click" event so the quicksand "click" event doesn't get funky with it.
Also fixes a bug in Quicksand that I discovered developing / testing this feature. We have to update the internal member variable to be better than 0 similarly to how id works. So do that.
Test Plan: went to phriction, toggled menu open, clicked home, clicked phriction and toggled menu again. Went back in history and noted menu was left to toggle state I previously had it. (currently a feature, not a bug)
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7919
Differential Revision: https://secure.phabricator.com/D12708
Summary: Fixes T7911.
Test Plan:
- load a page
- click something else
- go back to original page via clicking
- browser refresh
- click something else
- browser back -- and it now works!
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7911
Differential Revision: https://secure.phabricator.com/D12603
Summary: Fixes T7913. Collapse the separate board dropdown into the board projects behavior; we always need that anyway and now we can install the listener more granularly.
Test Plan:
- visted project board
- invoked create task, cancelled dialog
- visited project feed
- visited project board
- invoked create task, cancelled dialog (FAILED pre patch...!)
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7913
Differential Revision: https://secure.phabricator.com/D12599
Summary: Testing this out, feels much less heavy and more readable for me, but open to other feedback. I've also corrected/normalize the header sizes and heights.
Test Plan:
Copied some real Phriction documents to my local install, read them all. Checked header sizes and make sure px are used for more absolute control over sizes.
{F387327}
{F387328}
{F387329}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7963
Differential Revision: https://secure.phabricator.com/D12587
Summary:
Ref T4100. In Herald, using the browse dialog to select a result didn't work because we'd add the token with no name value. Other things would render it elsewhere, but it would eventaully be discarded.
Instead, add it with a name value.
Test Plan: Edited a Herald rule and used Browse > Select to add a token. Saved rule. Saw token persist.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4100
Differential Revision: https://secure.phabricator.com/D12529
Summary: Ref T7573. Unify code to fetch these counts and do some light formatting since we're going to need to do the same thing for some conpherence-specific ajax in the durable column (See T7708).
Test Plan: loaded up two tabs, one with a durable column on and one without. in the without browser, i read some messages, decrementing my unread count. when i navigated again in the durable column browser, the count updated correctly. with no notifications, commented on a task with another user to get a notification and it showed up properly. visited the task by clicking not the notification and the bubble count decremented correctly
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7573
Differential Revision: https://secure.phabricator.com/D12498
