Summary: Add the 'Depends On' field to releeph requests. This will help the release engineers to be aware of the dependencies and make sure pick them altogether.
Test Plan: Check sandbox. This field shows up when a revision has some dependencies.
Reviewers: JoelB, lifeihuang, epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7946
Summary: Ref T1344. Makes requests to the server, which are received and ignored. Performs appropriate locking/unlocking/enabling/disabling on the client.
Test Plan: Dragged stuff around, saw it enable/disable/send correctly.
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1344
Differential Revision: https://secure.phabricator.com/D7943
Summary:
Ref T2015. Several fixes:
- `checkForCancellation()` no longer exists, and isn't relevant for resumable stops. Throw it away for now.
- Fix an issue where a build could pass even if the final step failed.
- `phlog()` exceptions so they show up in `bin/harbormaster` and the daemon logs.
- Write an exception log if a step fails.
- Add a "throw an exception" step to debug this stuff more easily.
Test Plan:
- Grepped for `checkForCancellation()`.
- Ran a failing build where the final step caused the failure.
- Observed `phlog()` in `bin/harbormaster` output.
- Observed log in web UI:
{F101168}
Reviewers: btrahan, hach-que
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7935
Summary: This adds in the create flow for the Project board columns on the super secret board page which totally doesn't do anything right now.
Test Plan:
1. Apply diff.
2. Go to super secret page.
3. Click link close to top with a way too long name.
4. Enter a name for the column.
5. Enjoy a new column briefly before realising you cannot remove it.
6. Stay happy!
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: tmaroschik, Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7925
Summary: Ref T2015. Allow configuration of default edit/view policies for blueprints. Add create policy. Remove administrative exception in policies.
Test Plan: Configured these settings and created (or, with a restrictive create setting, tried to create) blueprints.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7921
Summary: Ref T1049. Creates convenience actions at the Buildable level to stop, resume, or restart all builds.
Test Plan:
- Stopped all builds.
- Resumed all builds.
- Restarted all builds.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7899
Summary:
Ref T1049. Currently you can cancel a build, but now that we're tracking a lot more state we can stop, resume, and restart builds.
When the user issues a command against a build, I'm writing it into an auxiliary queue (`HarbormasterBuildCommand`) and then reading them out in the worker. This is mostly to avoid race messes where we try to `save()` the object in multiple places: basically, the BuildEngine is the //only// thing that writes to Build objects, and it holds a lock while it does it.
Test Plan:
- Created a plan which runs "sleep 2" a bunch of times in a row.
- Stopped, resumed, and restarted it.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, chad
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7892
Summary:
Ref T1049. Currently, the Harbormaster worker looks like this:
foreach (step) {
run_step(step);
}
This means steps can't ever be run in parallel. Instead, split it into two workers. The "Build" worker starts things off, and basically does:
update_build();
(We could theoretically do this in the original process because it should never take very long, but since there's a lock and it's a little bit complex it seemed cleaner to separate it.)
The "Target" worker runs an individual target (like a command, or an HTTP request, or whatever), then updates the build:
run_one_step(step);
update_build();
The new `update_build()` mechanism in `HarbormasterBuildEngine` does this, roughly:
figure_out_overall_status_of_all_steps();
if (build is done) { done(); }
if (build is fail) { fail(); }
foreach (step that is ready to run) {
queue_target_worker_for_step(step);
}
So, overall:
- The part of the code that updates Builds is completely separated from the part of the code that updates Targets.
- Targets can run in parallel.
Test Plan:
- Ran a bunch of builds via `bin/harbormaster build`.
- Ran a bunch of builds via web UI.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7890
Summary:
pretty simple. did the bare minimum in the editor, etc. to be able to create an item from the conduit console.
I put the work in the editor for initializing new values, rather than some initializeNewItem method, mainly because Items don't have policy directly but instead policy will be defined by the queue(s) the item is in. The editor is definitely going to host this work, so it felt like it might be better to do it this way in time...? anyway, easy to make an initializeNew method instead if you want to have that paradigm going all the time.
Test Plan: made an item from teh conduit console - success. verified errors for missing data as well
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7879
Summary:
Fixes T4264. Adds:
- New "Repository's projects" field to Herald pre-commit rules, so you can write global rules which act based on projects.
- Allows pre-ref/pre-content rules to bind to projects, and fire for all repositories in that project, so users with limited power can write rules which apply to many repositories.
- The pre-ref and pre-content classes were starting to share a fair amount of code, so I made them both extend an abstract base class.
Test Plan: Wrote new pre-ref and pre-content rules bound to projects, then pushed commits into repositories in those projects and not in those projects. The "repository projects" field populated, and the rules fired for repositories in the relevant projects.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4264
Differential Revision: https://secure.phabricator.com/D7883
Summary:
Repositories currently have a no-UI "shortcut" feature which is only used by Facebook (and I'm not sure it's even used). As implemented, this feature is policy-oblivious and kind of nonsensical. Throw it away.
I'm open to reimplementing this, but I want to see some level of interest in it before I do. The new implementation would add shortcuts to each repository, similar to how mirrors work. My original plan was to follow this up with such an implementation (it's half-implemented in my sandbox), but as I worked through it I'm not sure it's really valuable.
Test Plan: Browsed repository list, grep.
Reviewers: btrahan
Reviewed By: btrahan
CC: FacebookPOC, aran
Differential Revision: https://secure.phabricator.com/D7862
Summary:
Ref T4222. This fixes some issues with Phame's resource construction.
Phame requires a fully virtual resource source, and since I want to run wordpress templates unmodified some day I don't want to build resource maps for skins.
Move all the stuff that depends on resource lists being discoverable at build time to `CelerityPhysicalResources`, and only generate maps for subclasses.
The root `CelerityResources` can now construct virtual resources; construct a virtual resource for Phame and use it.
Test Plan: Off-domain blogs work correctly now. On-domain blogs with custom skins work correctly now.
Reviewers: btrahan, hach-que
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T4222
Differential Revision: https://secure.phabricator.com/D7873
Summary:
Ref T4222.
- Removes the old map and changes the CelerityResourceMap API to be entirely driven by the new map.
- The new map is about 50% smaller and organized more sensibly.
- This removes the `/pkg/` URI component. All resources are now required to have unique names, so we can tell if a resource is a package or not by looking at the name.
- Removes some junky old APIs.
- Cleans up some other APIs.
- Added some feedback for `bin/celerity map`.
- `CelerityResourceMap` is still a singleton which is inextricably bound to the Phabricator map; this will change in the future.
Test Plan:
- Reloaded pages.
- Verified packaging works by looking at generated includes.
- Forced minification on and verified it worked.
- Forced no-timestamps on and verified it worked.
- Rebuilt map.
- Ran old script and verified error message.
- Checked logs.
Reviewers: btrahan, hach-que
Reviewed By: hach-que
CC: chad, aran
Maniphest Tasks: T4222
Differential Revision: https://secure.phabricator.com/D7872
Summary:
Ref T4222. Moves us toward a more modern Celerity CLI, and moves map discovery into the classtree. This is a little bit bulky (and means you can't ship completely standalone celerity maps) but has the advantage of being completely standard, and we could subclass maps into an auto-discovering map later if we have a need for it.
This doesn't affect the existing Celerity stuff. I'm going to build the new stuff in parallel, and then swap us over at the end.
Test Plan: Ran `bin/celerity map`, got reasonable-looking output.
Reviewers: btrahan, hach-que
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T4222
Differential Revision: https://secure.phabricator.com/D7864
Summary: Currently we markup `rXabcd`, but not `rX` on its own. Mark these up as repository object names.
Test Plan: Typed `rPOEMS`, `rPOEMS1`, `rPOEMS139893189`, etc.
Reviewers: btrahan, dctrwatson
Reviewed By: btrahan
CC: aran, poop
Differential Revision: https://secure.phabricator.com/D7859
Summary:
Fixes T4242. It's currently possible to set nonsense defaults and create repositories with unintended policies, because policy configuration isn't part of creation. Instead:
- put a policy page into the creation workflow;
- require the selection of valid policies (i.e., prevent creating a repository you can't view / edit).
Test Plan:
- Created imported and hosted repositories, hit policy selection.
- Edited policies of existing repositories.
- Tried to set nonsense policies.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4242
Differential Revision: https://secure.phabricator.com/D7856
Summary:
Ref T2015. Not directly related to Drydock, but I bumped into this. All these scripts currently enumerate their workflows explicitly.
Instead, use `PhutilSymbolLoader` to automatically discover workflows. This reduces code duplication and errors (see all the bad `extends` this diff fixes) and lets third parties add new workflows (not clearly valuable?).
Test Plan: Ran `bin/x help` for each modified script.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7840
Summary:
Ref T2015. Not directly related to Drydock, but I've wanted to do this for a bit.
Introduce a common base class for all the workflows in the scripts in `bin/*`. This slightly reduces code duplication by moving `isExecutable()` to the base, but also provides `getViewer()`. This is a little nicer than `PhabricatorUser::getOmnipotentUser()` and gives us a layer of indirection if we ever want to introduce more general viewer mechanisms in scripts.
Test Plan: Lint; ran some of the scripts.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7838
Summary: Ref T2015. All the Drydock query classes share the application method; move it into a shared base class to slightly shrink the codebase.
Test Plan: Browsed query UIs.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7837
Summary:
Ref T2015. Currently, Drydock has a `wait-for-lease` workflow which is invoked in the background by the `lease` workflow.
The goal of this mechanism is to allow `bin/drydock lease` to print out logs as the lease is acquired. However, this predates the `runAllTasksInProcess` flags, and they provide a simpler and more robust way (potentially with `--trace` and `PhutilConsole`) to do synchronous execution and debug logging.
Simplify this whole mechanism: just run everything in-process in `bin/drydock lease`, and do logging via `--trace`. We could thread a `PhutilConsole` through things too, but this seems good enough for now.
Also various cleanup/etc.
Test Plan: Ran `bin/drydock lease`. Ran `bin/harbormaster build X --plan Y`, for `Y` being a Drydock-dependent build plan.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7835
Summary:
Ref T2015. After introducing ApplicationSearch, the left nav turned into a soupy mess. Split the major sections into four separate areas, and unify them with a simple console.
This also reverts all the prefix stuff, since the results were awful and I don't anticipate it ever being the best solution to any UX problem.
Test Plan:
Browsed blueprints, resources, leases and logs.
Here's the new console:
{F93279}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7833
Summary: Ref T2015. This turns the side nav into a bigger mess for now, but uses ApplicationSearch for blueprints.
Test Plan: Queried blueprints in the UI.
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7829
Summary:
Ref T2015. These never got updated to the new stuff, move them out of the old `Constants` class and let them load handles, etc.
Also some half-cleanup of some Blueprint/BlueprintImplementation stuff.
Test Plan: Used `phid.query` to query a Resource, Lease, and Blueprint.
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7828
Summary:
Ref T2015. Applies ApplicationSearch to DrydockLease.
This makes the left nav in Drydock a little funky. It will probably get worse for a bit before it gets better, since I want to bring everything to ApplicationSearch and then sort out the details.
Test Plan: Queried leases in Drydock.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7827
Summary:
Ref T1049. Adds `bin/harbormaster` and `bin/harbormaster build` for applying plans from the console. Since this gets `--trace`, it's much easier to debug what's going on.
This doesn't work properly with some of the Drydock steps yet, I need to look at those. I think `setRunAllTasksInProcess` probably obsoletes some of the mechanisms. It might also not work with "Wait for Builds" but I didn't check.
Test Plan: Used `bin/harbormaster` to run a bunch of builds. Ran builds from web UI.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7825
Summary:
Ref T1049. Generally, it's useful to separate test/trial/manual runs from production/automatic runs.
For example, you don't want to email a bunch of people that the build is broken just because you messed something up when writing a new build plan. You'd rather try it first, then promote it into production once you have some good runs.
Similarly, test runs generally should not affect the outside world, etc. Finally, some build steps (like "wait for other buildables") may want to behave differently when run in production/automation than when run in a testing environment (where they should probably continue immediately).
So, formalize the distinction between automatic buildables (those created passively by the system in response to events) and manual buildables (those created explicitly by users). Add filtering, and stop the automated parts of the system from interacting with the manual parts (for example, we won't show manual results on revisions).
This also moves the "Apply Build Plan" to a third, new home: instead of the sidebar or Buildables, it's now on plans. I think this generally makes more sense given how things have developed. Broadly, this improves isolation of test environments.
Test Plan: Created some builds, browsed around, used filters, etc.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7824
Summary: Ref T4195. Ref T2783. We have an old-school implementation of this; move it into a LowLevel query and make callers all run through Conduit. I need the LowLevel query for hooks, to implement an "is merge commit" Herald rule.
Test Plan:
- Ran query via Conduit for SVN, Mercurial, Git.
- Parsed a commit which closed a revision, attach/closed worked correctly.
- Browsed Diffusion.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195, T2783
Differential Revision: https://secure.phabricator.com/D7808
Summary: Ref T4195. I need to query commit metadata to figure out which revision a commit is associated with. Move this out of the MessageParser so the code can be called from the HookEngine.
Test Plan: Used `reparse.php` to reparse a variety of SVN, Mercurial and Git commits. Used `var_dump()` to verify sensible fields were returned.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7805
Summary: Ref T4195. I need this for the Herald pre-commit rules, and it generally simplifies things.
Test Plan: Used `reparse.php` plus `var_dump()` to inspect refs in Git, Mercurial and SVN repos. They all looked correct and reparsed correctly.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7804
Summary:
Ref T4195. To implement the "Author" and "Committer" rules, I need to resolve author/committer strings into Phabricator users.
The code to do this is currently buried in the daemons. Extract it into a standalone query.
I also added `bin/repository lookup-users <commit>` to test this query, both to improve confidence I'm getting this right and to provide a diagnostic command for users, since there's occasionally some confusion over how author/committer strings resolve into valid users.
Test Plan:
I tested this using `bin/repository lookup-users` and `reparse.php --message` on Git, Mercurial and SVN commits. Here's the `lookup-users` output:
>>> orbital ~/devtools/phabricator $ ./bin/repository lookup-users rINIS3
Examining commit rINIS3...
Raw author string: epriestley
Phabricator user: epriestley (Evan Priestley )
Raw committer string: null
>>> orbital ~/devtools/phabricator $ ./bin/repository lookup-users rPOEMS165b6c54f487c8
Examining commit rPOEMS165b6c54f487...
Raw author string: epriestley <git@epriestley.com>
Phabricator user: epriestley (Evan Priestley )
Raw committer string: epriestley <git@epriestley.com>
Phabricator user: epriestley (Evan Priestley )
>>> orbital ~/devtools/phabricator $ ./bin/repository lookup-users rINIH6d24c1aee7741e
Examining commit rINIH6d24c1aee774...
Raw author string: epriestley <hg@yghe.net>
Phabricator user: epriestley (Evan Priestley )
Raw committer string: null
>>> orbital ~/devtools/phabricator $
The `reparse.php` output was similar, and all VCSes resolved authors correctly.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1731, T4195
Differential Revision: https://secure.phabricator.com/D7801
Summary: Ref T4195. Even though we use `svnlook` in the hook itself, I need this query elsewhere, so provide it and merge the classes into one which does the right thing.
Test Plan:
- Used `reparse.php` to reparse messages for Git, SVN and Mercurial commits, using `var_dump()` to examine the commit refs for sanity.
- Used `reparse.php` to reparse changes for an SVN commit.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7800
Summary: Ref T4195. Same as D7793, but for mercurial. (As usual, SVN needs some goofy nonsense instead, so the next diff will just make this field work.)
Test Plan: Ran `reparse.php` on Git and Mercurial commits, var_dump'd the output and it looked correct.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7795
Summary: Ref T4195. I need to issue this command from the pre-commit hook to get commit bodies for hooks.
Test Plan: Ran `reparse.php --message --trace` and dumped the $ref, which looked correct.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7793
Summary: Ref T4195. This doesn't provide any interesting fields yet (content, affected paths, commit message) but fires the hook correctly.
Test Plan: Added a blocking hook and saw it fire.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7789
Summary: Allow Herald rules to be referred to with `H123`, etc., like other object types are. Herald rules now have proper PHIDs and an increasingly prominent role in triggering application actions. Although I suspect users will rarely use `H123` in Remarkup to mention rules, this can simplify some of the interfaces which relate objects across systems.
Test Plan: Looked at various interfaces and saw `H123` names. Mentioned `H123` in remarkup.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7786
Summary:
A few users have hit cases where Herald transcripts of large commits exceed the MySQL packet limit, because one of the fields in the transcript is an enomrous textual diff.
There's no value in saving these huge amounts of data. Transcripts are useful for understanding the action of Herald rules, but can be reconstructed later. Instead of saving all of the data, limit each field to 4KB of data.
For strings, we just truncate at 4KB. For arrays, we truncate after 4KB of values.
Test Plan: Ran unit tests. Artificially decreased limit and ran transcripts, saw them truncate properly.
Reviewers: btrahan
Reviewed By: btrahan
CC: frgtn, aran
Differential Revision: https://secure.phabricator.com/D7783
Summary: Ref T4195. We need these in Herald, since HeraldTranscripts need to refer to a PHID which they acted upon.
Test Plan:
Ran migration, got PHIDs:
mysql> select phid from repository_pushlog limit 3;
+--------------------------------+
| phid |
+--------------------------------+
| PHID-PSHL-25jnc6cjgzw5rwqgmr7r |
| PHID-PSHL-2vrvmtslkrj5yv7nxsv2 |
| PHID-PSHL-34x262zkrwoka6mplony |
+--------------------------------+
3 rows in set (0.00 sec)
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7780
Summary: This implements support for enforcing and setting policies in Phragment.
Test Plan: Set policies and ensured they were enforced successfully.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4205
Differential Revision: https://secure.phabricator.com/D7751
Summary:
See <https://github.com/facebook/phabricator/issues/467>. @dctrwatson also ran into an issue where we were trying to `setPass()` a GitURI.
- For Git and Mercurial, properly generate credential URIs where relevant.
- Don't try to `setPass()` on Git-style URIs.
This isn't perfect but should clean things up a bit.
Test Plan: Added unit tests. Lots of `grep`.
Reviewers: btrahan
Reviewed By: btrahan
CC: dctrwatson, aran
Differential Revision: https://secure.phabricator.com/D7759
Summary:
This provides a `phragment.getstate` and a `phragment.getpatch` Conduit method.
`phragment.getstate` - This returns the current state of the fragment and all of it's children.
`phragment.getpatch` - This accepts a base path and a mapping of paths to hashes. The mapping is for the caller to specify the current state of the files it has. This returns a list of patches that the caller needs to apply to it's files to get to the latest version.
Test Plan:
Ran the following script in a folder which had content matching a fragment and it's children:
```
#!/bin/bash
STATE=""
for i in $(find ./ -type f); do
HASH=$(cat $i | sha1sum | awk '{ print $1 }')
BASE=${i:2}
STATE="$STATE,\"$BASE\":\"$HASH\""
done
STATE=${STATE:1}
STATE="{$STATE}"
echo '{"path":"tychaia3.zip","state":'$STATE'}' | arc --conduit-uri=http://phabricator.local/ call-conduit phragment.getpatch
```
and I got:
```
{"error":null,"errorMessage":null,"response":[]}
```
I updated one of the child fragments with a new file and ran the script again (patch has been omitted due to it's size):
```
{"error":null,"errorMessage":null,"response":[{"path":"Content\/TitleFont.xnb","hash_old":"4a927d7b90582e50cdd330de9f4b59b0cc5eb5c7","hash_new":"25867504642a3a403102274c68fbb9b430c1980f","patch":"..."}]}
```
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran, staticshock
Maniphest Tasks: T4205
Differential Revision: https://secure.phabricator.com/D7739
Summary: This adds a build step which will block a build from continuing if there are previous builds of the build plan still running.
Test Plan: Configured a build plan with a wait of 60 seconds and a "wait for previous builds", then started a build. While that was still building, reconfigured the plan to have a wait time of 3 seconds, started it, and saw it move into the "Waiting" status. When the 60 second build finished, both builds passed.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7745
Summary: This adds a build step in Harbormaster for publishing file artifacts as fragments in Phragment.
Test Plan:
Created a build plan with the following steps:
* Lease Host
* Upload Artifact
* Publish Fragment
Ran the build plan against a buildable and saw the fragment get created in Phragment. Ran the plan again and saw the fragment get updated with a new version. Modified the file that got uploaded and ran the plan again, checked the history of the fragment, and saw the differences represented as a Diff-Match-Patch patch.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4205
Differential Revision: https://secure.phabricator.com/D7742
Summary:
Ref T4212. This implements snapshots in Phragment, which allows you to take a snapshot of a fragment at a given point in time, and download a ZIP of the snapshot as it was in this state.
There's also functionality for deleting and promoting snapshots. You can promote a snapshot to either the latest version or any other snapshot of the fragment.
Test Plan: Clicked around, took some snapshots, promoted them to different points and deleted snapshots. Also downloaded ZIPs of the snapshots and saw the right versions coming through for all the files downloaded.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4205, T4212
Differential Revision: https://secure.phabricator.com/D7741
Summary:
This functionality allows users to revert a fragment to a previous version from the history page.
Reverting a version actually creates a new version pointing at the same file as the version being "reverted" to. In this sense it acts pretty much like Git and other distributed VCS where once you have published a commit the only way to undo your changes is to create a new commit that reverts those changes.
Test Plan: Reverted a fragment to a version before it was deleted, then reverted it to when it was deleted and saw the new versions have the correct file PHIDs (including null for the deletion).
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4205
Differential Revision: https://secure.phabricator.com/D7738
Summary:
This adds support for viewing individual versions on a fragment as well as comparing versions and downloading diff_match_patch-based patches.
It does not use the side-by-side diff format as while it works for small changes, it quickly becomes impossible to distingush what changes have been made due to the diff_match_patch format.
Test Plan: Clicked on versions and downloaded patches.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4205
Differential Revision: https://secure.phabricator.com/D7734
