Summary: Ref T4365. Aligns jump nav with the normal search behavior.
Test Plan: Typed some junk into the jump nav, mashed return.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4365
Differential Revision: https://secure.phabricator.com/D8136
Summary:
Fixes T4365. See discussion in D8123.
This implements the most conservative solution of approaches discussed in D8123. Basically:
- When you search in primary search, we overwrite "query" in your default (topmost) search filter, and execute that.
This doesn't implement any of the other "sticky" stuff, where the query sticks around. Maybe we'll do that eventually, but it gets messy and could be confusing. Practically, this addresses the major use case in the wild, which is to make the menu bar search mean "Open Tasks" by default.
This also removes the old, obsolete "search scope" stuff. A long time ago, searching from within Maniphest would search tasks, etc., but this was pretty weird and confusing and is no longer used, and no one complained when we got rid of it.
Test Plan: Dragged "Open Tasks" to my top search, searched for "asdf", got "asdf in open tasks" results.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: bigo, aran
Maniphest Tasks: T4365
Differential Revision: https://secure.phabricator.com/D8135
Summary:
Ref T4365. Drive primary search through ApplicationSearch instead of through a bunch of custom nonsense. Notably, this allows you to save searches, notably.
The one thing this doesn't do -- which I'd like it to -- is carry your query text across searches. When you search for "quack", I want to overwrite the query in your default filter and give you those results, so you can turn the search into an "Open Tasks" search by default by reordering the queries. I'll probably do that next. It feels a little hacky but I want to try it out.
Test Plan: {F106932}
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran, bigo
Maniphest Tasks: T4365
Differential Revision: https://secure.phabricator.com/D8123
Summary: Ref T4365. It's not practical to cursor-page all engines; allow main search engines to be offset-paged. Basically, this comes down to setting a flag and then doing a couple of tiny things differently.
Test Plan: Used this two diffs from now.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4365
Differential Revision: https://secure.phabricator.com/D8121
Summary: Ref T4365. Two diffs from now, I'm changing the UI a bit to let you search for closed and unowned documents more explcitly. To support this in ElasticSearch and more easily in MySQL search, make these explicit, positive relationships.
Test Plan: `bin/search index --all`
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4365
Differential Revision: https://secure.phabricator.com/D8122
Summary:
Ref T4365. Primary search currently uses `PhabricatorSearchQuery` for storage, which is pretty much the same as `PhabricatorSavedQuery`, except that it's old and not used anywhere else anymore.
Maniphest used to also use this table, but no longer does after Septmeber, 2013. We need to retain the class so the migration can work.
This introduces `PhabricatorSearchApplicationSearchEngine` and `PhabricatorSearchDocumentQuery`, but they're both stubs that I just needed for technical reasons and/or to pass lint. The next couple patches will move logic into them and use ApplicationSearch properly.
Test Plan:
- Searched for stuff.
- Searched for stuff with filters.
- Searched for fulltext in Maniphest.
- Grepped for `PhabricatorSearchQuery`.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4365
Differential Revision: https://secure.phabricator.com/D8120
Summary: See <https://github.com/facebook/phabricator/issues/501>. I think the issue here is that we created a foreign stub for commit `X-1`, probably because commit `X` was created by running `svn cp y x`.
Test Plan: I'll write a separate test for this before I land it. Huge pain to test.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D8133
Summary: Ref T3583. This doesn't add any dashboard/panel-specific code beyond headers/titles/buttons/etc., but allows you to create and view dashboards and panel skeletons.
Test Plan: See screenshots.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3583
Differential Revision: https://secure.phabricator.com/D8131
Summary:
Fixes T4368. This is the last "obvious" table we have which we should be GC'ing but do not. It's about 1/12th of the data on `secure.phabricator.com`.
This table stores logins, account creation, password resets, login attempts, etc, and is primarily useful if something sketchy happens so you can go back and review login activity. This data is not useful indefinitely, and there's no reason to retain it forever. Because you don't always know when something sketchy happened I've given this table a fairly long TTL (180 days), but we don't need limitless amounts of this data.
Test Plan: Ran `phd debug garbage` and saw a reasonable amount of data get GC'd. This table already has an appropriate key.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4368
Differential Revision: https://secure.phabricator.com/D8128
Summary: Ref T4368. We don't currently GC these tables, and the sent mail table is one of the largest on `secure.phabricator.com`. There's no value in retaining this information indefinitely. Instead, retain it for 90 days, which should be plenty of time to debug/diagnose any issues.
Test Plan: Ran `phd debug garbage`, saw it clean up a reasonable amount of data from these tables.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4368
Differential Revision: https://secure.phabricator.com/D8127
Summary:
Ref T4361. Before we figure out which To/CC are addressable, try to expand To/CC. Specifically, the supported expansion right now is project PHIDs expanding to all their members.
Because of the way multiplexing works, we have to do this in two places: explicitly in `multiplexMail()`, and when sending mail that wasn't multiplexed. This is messy; eventually we can get rid of it (after ApplicationTransactions are everywhere).
This has some rough edges, but should basically give us what we need to make stuff like projects mailable. Particularly, it deals with most issues in D7436:
- I got around the resolution/multiplexing issue by resolving aggregate mailables separately from mailable actors.
- We get to keep the Project PHID as a To/CC/Reviewer/Whatever until the last second.
- Users won't get two emails for being a CC and also a member of a CC'd project.
- We can degrade to the list stuff this way if we want, by having the project aggregate yield a single list PHID.
Test Plan: Added a comment to a revision with a project reviewer, got mail to all the project's members.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4361
Differential Revision: https://secure.phabricator.com/D8117
Summary:
Fixes T4202. We have old code in MetaMTA which implements gradual backoff and maximum retries.
However, we have more general code in the task queue which does this, too. We can just use the more general stuff in the task queue; it obsoletes the specific stuff in MetaMTA, which is more complex and ran into some kind of issue in T4202.
Remove `retryCount`, `nextRetry` (obsoleted by task queue retry mechanisms) and "simulated failures" (no longer in use).
Generally, modern infrastructure has replaced these mechanisms with more general ones.
Test Plan:
- Sent mail.
- Observed unsendable mail failing in reasonable ways in the queue.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4202
Differential Revision: https://secure.phabricator.com/D8115
Summary:
Ref T156. @vlada recently implemented filename search in Diffusion, this cleans up the UI a little bit:
- Instead of showing one search box with two different buttons, let the submit buttons appear to the right of the text boxes and separate the search modes.
- Clean up the results a little bit (don't show columns which don't exist).
Test Plan: {F107260}
Reviewers: vlada, btrahan, chad
Reviewed By: chad
CC: vlada, chad, aran
Maniphest Tasks: T156
Differential Revision: https://secure.phabricator.com/D8125
Summary:
Ref T156. Adds basic filename search support for Diffusion,
currently only for Git repositories.
This is preliminary, and it's up for discussion:
- is the UI in the right place;
- what should the search query syntax be (e.g. whether
to put `*`s in the beginning and end of it);
- how to best approach it for Mercurial and/or SVN;
- what's the cleanest result format for `lsquery` (I went
for the minimum necessary change to `DiffusionBrowseSearchController`).
Test Plan:
Browse to a repository in Diffusion, and use both
`Search File Names` and `Search File Content`.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T156
Differential Revision: https://secure.phabricator.com/D8093
Summary: This adds the app icons, cleans up css Ref T3623
Test Plan: see new icons in dropdown menu
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T3623
Differential Revision: https://secure.phabricator.com/D8124
Summary: This uses the slightly smaller icons. Not sure about the logout icon, will play with it more in the morning.
Test Plan: tested new nav on desktop and mobile.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D8119
Summary:
Fixes T4358. User request from IRC, but I think this is generally reasonable.
Although we can not prevent users from determining that other user accounts exist in the general case, it does seem reasonable to restrict browsing the user directory to a subset of users.
In our case, I'll probably do this on `secure.phabricator.com`, since it seems a little odd to let Google index the user directory, for example.
Test Plan: Set the policy to "no one" and tried to browse users.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4358
Differential Revision: https://secure.phabricator.com/D8112
Summary: Similar to D8110, but for Pholio. Also an IRC user request.
Test Plan: Set setting to something unusual, created a new mock.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D8111
Summary: Ref T3116. User request / generally modern feature.
Test Plan: Set defaults to whacky projects and created a new document; it defaulted appropriately.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, allan.laal
Maniphest Tasks: T3116
Differential Revision: https://secure.phabricator.com/D8110
Summary:
Ref T3102
In diffusion, add "In Any Project" to search options.
Test Plan: use it.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T3102
Differential Revision: https://secure.phabricator.com/D8113
Summary:
Ref T3583. General idea here is:
- Users will be able to create `DashboardPanel`s, which are things like the jump nav, or a minifeed, or recent assigned tasks, or recent tokens given, or whatever else.
- The `DashboardPanel`s can be combined into `Dashboard`s, which select specific panels and arrange them in some layout (and maybe have a few other options eventually).
- Then, you'll be able to set a specific `Dashboard` for your home page, and maybe for project home pages. But you can also use `Dashboard`s on their own if you just like dashboards.
My plan is pretty much:
- Put in basic infrastructure for dashboards (this diff).
- Add basic create/edit (next few diffs).
- Once dashboards sort of work, do the homepage integration.
This diff does very little: you can't create dashboards or panels yet, and thus there are no dashboards to look at. This is all skeleton code, pretty much.
IMPORTANT: We need an icon bwahahahahaha
Test Plan:
omg si purrfect
{F106367}
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3583
Differential Revision: https://secure.phabricator.com/D8109
Summary:
Fixes T4356. Currently, if users add a passworded private key to the Passphrase application, we never ask for the password and can not use it later. This makes several changes:
- Prompt for the password.
- Detect passworded private keys, and don't accept them until we can decrypt them.
- Try to decrypt passworded private keys, and tell the user if the password is missing or incorrect.
- Stop further creation of path-based private keys, which are really just for compatibility. We can't do anything reasonable about passwords with these, since users can change the files.
Test Plan: Created a private key with a password, was prompted to provide it, tried empty/bad passwords, provided the correct password and had the key decrypted for use.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4356
Differential Revision: https://secure.phabricator.com/D8102
Summary: Fixes T4175. In cases where the arguments have only always-safe characters, we can produce a more human-readable URI.
Test Plan: Looked at some repositories.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T4175
Differential Revision: https://secure.phabricator.com/D8100
Summary:
Ref T4175. This allows these URIs to all be valid for Git and Mercurial:
/diffusion/X/
/diffusion/X/anything.git
/diffusion/X/anything/
This mostly already works, it just needed a few tweaks.
Test Plan: Cloned git and hg working copies using HTTP and SSH.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T4175
Differential Revision: https://secure.phabricator.com/D8098
Summary:
Ref T4175.
- Add a configurable name for the clone-as directory, so you can have "Bits & Pieces" clone as "bits~n~pieces/" or simliar.
- By default, use "reasonable" heruistics to choose such a name.
- Generate a copy/pasteable clone commmand with this directory name.
Test Plan: Looked at some repositories.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T4175
Differential Revision: https://secure.phabricator.com/D8097
Summary:
Hosted repositories have muddied this distinction somewhat. In some cases, we only want to use the real remote URI, and the call is only relevant for imported repositories.
In other cases, we want the URI we'd plug into `git clone`.
Move this logic into `PhabricatorRepository` and make the distinction more clear.
Test Plan: Viewed SVN, Git, and Mercurial hosted and remote repositories, all the URIs looked reasonable.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, dctrwatson
Differential Revision: https://secure.phabricator.com/D8096
Summary:
Fixes T4357. The Mercurial commit hooks enforce dangerous change protection, but the UI doesn't actually let you configure it.
This was just an oversight (I never went back and enabled it) -- allow it to be configured in the UI.
Test Plan: Clicked "Edit Repository" on a hosted Mercurial repository, saw option to enable dangerous changes.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T4357
Differential Revision: https://secure.phabricator.com/D8108
Summary:
Fixes T4066.
add `isActionDisabled()` to DifferentialLandingStrategy, which also explains why it is so.
Make an appropriate pop-up in the controller.
Also make the whole UI "workflow", and convert `createMenuItems()` to `createMenuItem()` (Singular).
Test Plan: Click "Land to..." button in all kinds of revisions.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4066
Differential Revision: https://secure.phabricator.com/D8105
Summary:
Ref T4338. Mercurial exits with exit code 1 and "no changes found" in stdout
when there's no changes. I've split up the `pushRepositoryToMirror` to make
the code a tad more readable.
It isn't perfect, but it works for me.
Test Plan:
pushed some changes to my hosted repo. Saw them appearing in the
mirrored repo
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4338
Differential Revision: https://secure.phabricator.com/D8107
Summary: Ref T3623. These are obsoleted by the global quick-create menu, so we can simplify the app launcher.
Test Plan: Looked at app launcher, grepped for everything.
Reviewers: chad
Reviewed By: chad
CC: chad, aran
Maniphest Tasks: T3623
Differential Revision: https://secure.phabricator.com/D8104
Summary: Ref T3623. Also dropped "New" from everything, since the "Create a new:" label contextualizes that.
Test Plan: Clicked all the stuff in the menu.
Reviewers: chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T3623
Differential Revision: https://secure.phabricator.com/D8103
Summary: Policies are now fully supported in Differential.
Test Plan: Grepped for other caveats, looks like I've already removed htem all.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D8095
Summary: See IRC. This will be obsoleted by ApplicationTransactions eventually, but fix issues with stauts change previews for now. Specifically, if you select "Reopen Task", it incorrectly previews as "x created this task" because the old state is not set correctly.
Test Plan: Selected "Reopen Task", saw a preview with the correct language.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D8094
Summary:
Ref T3623. I'm sure I didn't get the margins / drop shadow quite right, but this looks and works reasonably well:
{F105637}
Test Plan: Clicked stuff to quick create.
Reviewers: chad, btrahan
Reviewed By: chad
CC: chad, aran
Maniphest Tasks: T3623
Differential Revision: https://secure.phabricator.com/D8089
Summary:
Ref T3623. This is like a pre-v0, in that it doesn't have a dropdown yet.
Clicking the button takes you to a page which can serve as a right click / mobile / edit target in the long run, but is obviously not great for desktop use. I'll add the dropdown in the next iteration.
Test Plan: {F105631}
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T3623
Differential Revision: https://secure.phabricator.com/D8088
Summary: Fixes T4336. This updates the build engine to delete all artifacts when targets are being deleted. This prevents conflicts when builds are restarted.
Test Plan: Restarted a build that had a lease host step and it didn't crash.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4336
Differential Revision: https://secure.phabricator.com/D8092
Summary:
Fixes T1353. Also some minor unrelated cleanup:
- `openTransaction()` / `saveTransaction()` exist now, fix TODOs.
- Fix some instructions.
- Make `diffusion.branchquery` return empty for SVN rather than fataling.
Test Plan:
- Added a branches rule.
- Ran a dry run against commits in different VCSes.
{F105574}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, Nopik
Maniphest Tasks: T1353
Differential Revision: https://secure.phabricator.com/D8086
Summary:
I derped this up, and it passed my tests because the two URIs are the same for hosted repositories.
Match repositories against their remote URI (like `https://github.com/user/repo.git`), not their display URI (like `/diffusion/X/`).
Test Plan: i r dums
Reviewers: talshiri, btrahan
Reviewed By: talshiri
CC: aran
Differential Revision: https://secure.phabricator.com/D8082
Summary:
Fixes T4344. `diffusion.getcommits` is nasty old bad news. Implement a modern query method.
This method provides limit/paging in a somewhat abstract way so it's sort of ultramodern, but I didn't want the default behavior to return a million rows. I'll probably move more stuff toward this over time, now that cursor paging is pervasive. Here, we needed extra metadata (the identifier map) anyway.
Test Plan: Used console to execute command.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4344
Differential Revision: https://secure.phabricator.com/D8077
Summary:
Via HackerOne, there are two related low-severity issues with this workflow:
- We don't check if you're already logged in, so an attacker can trick a victim (whether they're logged in or not) into clicking a reset link for an account the attacker controls (maybe via an invisible iframe) and log the user in under a different account.
- We don't check CSRF tokens either, so after fixing the first thing, an attacker can still trick a //logged-out// victim in the same way.
It's not really clear that doing this opens up any significant attacks afterward, but both of these behaviors aren't good.
I'll probably land this for audit in a few hours if @btrahan doesn't have a chance to take a look at it since he's probably on a plane for most of the day, I'm pretty confident it doesn't break anything.
Test Plan:
- As a logged-in user, clicked another user's password reset link and was not logged in.
- As a logged-out user, clicked a password reset link and needed to submit a form to complete the workflow.
Reviewers: btrahan
CC: chad, btrahan, aran
Differential Revision: https://secure.phabricator.com/D8079
Summary:
Added yformat to ManiphestReportController. Removed [yy] from the js.
Will pull config.yformat or send []. The old way with [yy] never seemed to worked having config.yformat, also would crash if yformat was in with value
Test Plan: Loadup burn up report, hover over a given date. Number of tasks opened should be an int
Reviewers: epriestley, #blessed_reviewers
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D8080
Summary:
Moves away from ArcanistProjects:
- Adds storage for diffs to be directly associated with a repository (instead of indirectly, through arcanist projects). Not really populated yet.
- Drops `parentRevisionID`, which is obsoleted by the "Depends On" edge. This is not exposed in the UI anywhere and doesn't do anything. Resolves TODO.
Test Plan: Ran storage upgrades, browsed around, lots of `grep`.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D8072
Summary: Fixes T3979. The content isn't necessarily very good yet (see T4103, T3583), but this makes it work (e.g., not be a login screen).
Test Plan: Loaded home as a logged-out user on a public install, saw home instead of login.
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3979
Differential Revision: https://secure.phabricator.com/D8075
Summary: Ref T3979. Currently, the home page lives in an old application called "directory" and is informally defined. Make it a real application called "Home", with a formal definition. It isn't launchable and can't be uninstalled.
Test Plan: Loaded home, saw exact same stuff.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T3979
Differential Revision: https://secure.phabricator.com/D8074
Summary: Super old method which is completely obsoleted by `user.query`
Test Plan: Poked around web UI, ran method.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D8071
Summary: This helps us move away from arcanist projects in normal use, by allowing us to identify repositories based on the remote URI.
Test Plan: Used `repository.query` to query some repos by remote URI.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D8069
Summary: Expose more options on `repository.query`. My broad goal here is to move forward on suppressing Arcanist Projects.
Test Plan: Used Conduit console to execute queries.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D8068
Summary: Ref T4338. Currently, if you have several mirrors and the first one fails, we won't try the other mirrors (since we'll throw and that will take us out of the mirroring process). Instead, try each mirror even if one fails, and then throw an AggregateException with all the failures.
Test Plan:
- Ran `bin/repository mirror` normally.
- Faked an exception, ran again, got the AggregateException I expected.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4338
Differential Revision: https://secure.phabricator.com/D8067
Summary:
Ref T4338. Currently, there's no diagnostic command to execute mirroring (so I can't give users an easy command to run), and it's roughly the last piece of real logic left in the PullLocal daemon.
Separate mirroring out, and provide `bin/repository mirror`.
Test Plan:
- Ran `bin/repository mirror` to mirror a repository.
- Ran PullLocalDaemon and verified it also continued mirroring normally.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4338
Differential Revision: https://secure.phabricator.com/D8066
Summary:
I'm not sure if this is desired functionality, but we happen to need
mirroring of our repository which is not hosted by phabricator, and as far as
I can tell the mirroring code does not depend on the hosting code.
Test Plan:
Setup mirror with SSH credentials to github, pushed changes to
elsewhere hosted repository, commits got mirrored to github.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4338
Differential Revision: https://secure.phabricator.com/D7637
Summary: round them there corners, to create more of a "bubble" effect in legalpad. Ref T3116.
Test Plan: see screenshot, which demonstrates new style works
Reviewers: epriestley
Reviewed By: epriestley
CC: chad, Korvin, epriestley, aran
Maniphest Tasks: T3116
Differential Revision: https://secure.phabricator.com/D8060
Summary:
A few users have hit this and found it confusing. Currently, it means "more than 99.95%", which is very different from "100%". Instead:
- show an extra digit of precision; and
- cap the display at "99.99%", so it's more clear that work is still happening.
Test Plan: Faked it and saw it cap at 99.99%.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D8058
Summary:
Ref T2380. If an install has a CDN domain configured, but does not list it as an alternate domain (which is standard/correct, but not incredibly common, see T2380), we'll currently try to set anonymous cookies on it. These will correctly fail security rules.
Instead, don't try to set these cookies.
I missed this in testing yesterday because I have a file domain, but I also have it configured as an alternate domain, which allows cookies to be set. Generally, domain management is due for some refactoring.
Test Plan: Set file domain but not as an alternate, logged out, nuked file domain cookies, reloaded page. No error after patch.
Reviewers: btrahan, csilvers
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2380
Differential Revision: https://secure.phabricator.com/D8057
Summary: See IRC. Currently, if a fetch fails, we may repair the remote URI incorrectly, replacing it with one without any credentials. Instead, retain credentials.
Test Plan: Faked it locally, got le-boom to verify on IRC.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D8055
Summary: Ref T4339. We didn't previously check `isFormPost()` on these, but now should.
Test Plan: Changed csrf token on login, got kicked out.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T4339
Differential Revision: https://secure.phabricator.com/D8051
Summary:
Fixes T3793. There's a lot of history here, see D4012, T2102. Basically, the problem is that things used to work like this:
- User is logged out and accesses `/xyz/`. After they login, we'd like to send them back to `/xyz/`, so we set a `next_uri` cookie.
- User's browser has a bunch of extensions and now makes a ton of requests for stuff that doesn't exist, like `humans.txt` and `apple-touch-icon.png`. We can't distinguish between these requests and normal requests in a general way, so we write `next_uri` cookies, overwriting the user's intent (`/xyz/`).
To fix this, we made the 404 page not set `next_uri`, in D4012. So if the browser requests `humans.txt`, we 404 with no cookie, and the `/xyz/` cookie is preserved. However, this is bad because an attacker can determine if objects exist and applications are installed, by visiting, e.g., `/T123` and seeing if they get a 404 page (resource really does not exist) or a login page (resource exists). We'd rather not leak this information.
The comment in the body text describes this in more detail.
This diff sort of tries to do the right thing most of the time: we write the cookie only if we haven't written it in the last 2 minutes. Generally, this should mean that the original request to `/xyz/` writes it, all the `humans.txt` requests don't write it, and things work like users expect. This may occasionally do the wrong thing, but it should be very rare, and we stop leaking information about applications and objects.
Test Plan: Logged out, clicked around / logged in, used Charles to verify that cookies were set in the expected way.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3793
Differential Revision: https://secure.phabricator.com/D8047
Summary: Fixes T4339. If you're anonymous, we use a digest of your session key to generate a CSRF token. Otherwise, everything works normally.
Test Plan: Logged out, logged in, tweaked CSRF in forms -- I'll add some inlines.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4339
Differential Revision: https://secure.phabricator.com/D8046
Summary:
Ref T4339. Login providers use absolute URIs, but the ones that rely on local form submits should not, because we want to include CSRF tokens where applicable.
Instead, make the default be relative URIs and turn them into absolute ones for the callback proivders.
Test Plan: Clicked, like, every login button.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4339
Differential Revision: https://secure.phabricator.com/D8045
Summary:
Ref T4339. Ref T4310. Currently, sessions look like `"afad85d675fda87a4fadd54"`, and are only issued for logged-in users. To support logged-out CSRF and (eventually) external user sessions, I made two small changes:
- First, sessions now have a "kind", which is indicated by a prefix, like `"A/ab987asdcas7dca"`. This mostly allows us to issue session queries more efficiently: we don't have to issue a query at all for anonymous sessions, and can join the correct table for user and external sessions and save a query. Generally, this gives us more debugging information and more opportunity to recover from issues in a user-friendly way, as with the "invalid session" error in this diff.
- Secondly, if you load a page and don't have a session, we give you an anonymous session. This is just a secret with no special significance.
This does not implement CSRF yet, but gives us a client secret we can use to implement it.
Test Plan:
- Logged in.
- Logged out.
- Browsed around.
- Logged in again.
- Went through link/register.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4310, T4339
Differential Revision: https://secure.phabricator.com/D8043
Summary: Ref T4339. We have more magical cookie names than we should, move them all to a central location.
Test Plan: Registered, logged in, linked account, logged out. See inlines.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4339
Differential Revision: https://secure.phabricator.com/D8041
Summary:
Fixes T4143. This mitigates the "use a botnet to slowly try to login to every user account using the passwords '1234', 'password', 'asdfasdf', ..." attack, like the one that hit GitHub.
(I also donated some money to Openwall as a thanks for compiling this wordlist.)
Test Plan:
- Tried to register with a weak password; registered with a strong password.
- Tried to set VCS password to a weak password; set VCS password to a strong password.
- Tried to change password to a weak password; changed password to a strong password.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, chad
Maniphest Tasks: T4143
Differential Revision: https://secure.phabricator.com/D8048
Summary: Fixes T3957, adds timestamps to the notifications page.
Test Plan: View my notifications page, see the new time stamps. Uncertain if I set $user correctly.
Reviewers: epriestley, btrahan
Reviewed By: btrahan
CC: Korvin, epriestley, aran
Maniphest Tasks: T3957
Differential Revision: https://secure.phabricator.com/D8039
Summary: Minor, adds the Callsign and changes to cards view when listing repositories.
Test Plan: Reload sandbox list of repositories, see new items.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D8036
Summary: Add the arc project and branch fields in emails for revisions under review. I am not quite sure why we only show them for changes which is already accepted or needs revision. It would be nice to have them for changes under review too.
Test Plan: Create a new revision and check email
Reviewers: epriestley, lifeihuang, JoelB, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D8035
Summary: Cleans up the homepage a little bit. Removes the subheaders and buttons, links the panel header, and adds an icon for further hinting. Also aligned things up to the common 16px gutter.
Test Plan: Tested home, differential, and maniphest. Screenshotted changes
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D8034
Summary: After adding the CLOSEABLE flag, `bin/repository importing` reports CLOSEABLE commits with no information. Just don't report these, for consistency with the old behavior. Adding flags to show them might be nice at some point if we run into issues where that output would be useful.
Test Plan: Ran `bin/repositroy importing` on a repository with CLOSEABLE commits.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D8024
Summary:
See <http://github.com/facebook/phabricator/issues/487>. By default, we perform a write in this query to moved daemons to "dead" status after a timeout. This is normally reasonable, but after D7964 we do a setup check against the daemons, which means this query is invoked very early in the stack, before we have a write guard.
Since doing this write unconditionally is unnecessarily, surprising, and overly ambitious, make the write conditional and do not attempt to perform it from the setup check.
(We could also move this to a GC/cron sort of thing eventually, maybe -- it's a bit awkward here, but we don't have other infrastructure which is a great fit right now.)
Test Plan: Hit setup issues and daemon pages. Will confirm with user that this fixes things.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D8023
Summary: Fixes T3238. Ref T4327. Although the instructions are fairly clear on this, it's easy to miss them. Make sure the root the user enters matches the real root.
Test Plan: Added unit tests. Used `bin/repository discover` to hit the check explicitly.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3238, T4327
Differential Revision: https://secure.phabricator.com/D8020
Summary: Ref T4327. This adds a subpath/partial repository where we import only a subdirectory, and adds tests for it.
Test Plan: Ran unit tests.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4327
Differential Revision: https://secure.phabricator.com/D8019
Summary:
Ref T4327. Adds additional tests:
- Property changes on the root directory (which has special handling).
- Copying a file from a previous revision (this is `svn cp svn://server.com/root/some_file@123 some_file`).
- "Multicopying" a file: this is where a file is copied to several places and moved in the same commit.
Test Plan: Ran unit tests.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4327
Differential Revision: https://secure.phabricator.com/D8018
Summary:
Ref T4327. Adds additional SVN tests to cover:
- replacing a file with a file;
- replacing a file with a directory;
- removing a directory with files in it;
- adding a directory with files;
- copying a directory and adding and deleting files inside it.
Test Plan: Ran unit tests. One of these has a slightly irregular parse, see inline.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4327
Differential Revision: https://secure.phabricator.com/D8017
Summary:
As you've suggested, I took the SendGrid code and massaged it until it played nice with Mailgun.
btw - unless I'm missing something, it appears that the SendGrid receiver lets you spoof emails (it performs no validation on the data received).
Test Plan: Opened a task with Mailgun. Felt great.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4326
Differential Revision: https://secure.phabricator.com/D7989
Summary:
Ref T4327. Adds the same basic battery of tests to the SVN parser as the other parsers have.
cowsay {{{ THIS IS AN AMAZING DIFF }}}
Test Plan:
Ran unit tests against SVN change parsing.
bwahaha
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4327
Differential Revision: https://secure.phabricator.com/D8016
Summary: Ref T4327. This adds a set of test cases for the Mercurial parser. These tests are nearly identical to the git cases, except that the Mercurial parser can't figure out symlinks right now.
Test Plan: Ran unit tests.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4327
Differential Revision: https://secure.phabricator.com/D8014
Summary: Ref T4327. Adds some basic tests to the Git parser for a set of common operations (add, change, move, copy, directory, symlink, propchange).
Test Plan: Ran unit tests.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4327
Differential Revision: https://secure.phabricator.com/D8012
Summary:
Ref T4327. There are a bunch of other probably-related tasks too, some linked there.
We have some rare/unusual bugs in the change parsers, mostly in Subversion, but it's terrifying to touch them because they're complicated and fragile and have no test coverage.
To fix this stuff, I want to make them more testable. In particular, they basically end with this big INSERT right now. Instead, I'm going to make them return objects representing the data to be inserted, then have the common infrastructure do the insert. This gives us two benefits:
- Reduced code duplication on the insert;
- we can stop before the insert and have unit tests examine the objects.
This swaps the Git parser over, but doesn't swap the hg/svn parsers yet. I'll do those separately, the SVN one looks a bit tricky.
Test Plan:
- Used `scripts/repository/reparse.php` to reparse a Git commit, with `--trace`. Verified it looked the same as before and the SQL that was executed seemed reasonable.
- Did the same for `hg` / `svn` commits, to make sure I didn't derp anything. These aren't expected to do anything differently.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4327
Differential Revision: https://secure.phabricator.com/D7980
This seems to be a specific of how browsers are dealing with
spaces/tabs. Multiple spaces works just fine, but multiple
tabs were treating as a single space which breaks indentation.
Now made it so tabs are replaced with 4 spaces. Not ideal but
still better than fully unreadable code. This also matches to
how differential is handling tabs.
Ref T2495. See: <https://github.com/facebook/phabricator/issues/487>
Reviewed by: epriestley
Summary:
Ref T4327. This is general cleanup since I was in this area of the code. Primarily, the Mercurial implementation here was completely broken and wrong:
- It returned only one branch, but a commit can be present on many branches.
- It did not account for multiple branch heads.
- It returned a result implying the branch head pointed at the queried commit, which is no consistent or accurate.
Simplify the amount of API we're dealing with by collapsing this method into the very similar `diffusion.branchquery` method.
Test Plan: Looked at mercurial and git repositories and commits, branch information seemed correct.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4327
Differential Revision: https://secure.phabricator.com/D8003
Summary: Ref T4327. At some point these two very similar classes got introduced. Collapse `DiffusionBranchInformation` into the nearly identical `DiffusionRepositoryRef`, which enjoys slightly more generality and support.
Test Plan: Viewed branch overview and detail pages. Ran `repository refs` and `repository discover`. Grepped for removed symbols.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4327
Differential Revision: https://secure.phabricator.com/D8002
Summary:
Currently, we can sit in a sleep() for up to 15 seconds (or longer, in some cases), even if there's a parse request.
Try polling the DB every second to see if we should wake up instead. This might or might not produce significant improvements, but seems OK to try and see.
Also a small fix for logging branch names with `%` in them, etc.
Test Plan: Ran `phd debug pulllocal` and pushed commits, saw them parse within a second.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, dctrwatson
Differential Revision: https://secure.phabricator.com/D7998
Summary:
Ref T4327. This moves the last pieces of discovery responsibility out of the PullLocal daemon and into the DiscoveryEngine.
(This makes it easier to discover repositories in unit tests in the future, since we don't need to build a PullLocal daemon and can just build a DiscoveryEngine.)
Test Plan: Ran `phd debug pulllocal`. Ran `repostory discover`.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4327
Differential Revision: https://secure.phabricator.com/D7997
Summary: be sure to use array() (and not null) so we don't fatal if we have no signatures
Test Plan: no more fatal when editing a signature-less document
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D8000
Summary:
Ref T4327. Consolidates and simplifies infrastructure:
- Moves Git discovery into DiscoveryEngine.
- Collapses a bunch of the Git and Mercurial code related to stream discovery.
- Removes all cach code from PullLocal daemon (it's no longer called).
- Adds basic unit tests for Git and Mercurial discovery.
Various cleanup:
- Makes GitStream and MercurialStream extend a common base.
- Improves performance of MercurialStream in some cases, by requiring fewer commits be output and parsed.
- Makes mirroring exceptions easier to debug.
- Fixes discovery of Mercurial repositories with multiple branch heads.
- Adds some missing `pht()`.
Test Plan:
I tested this fairly throughly because I think this phase is complete:
- Made new repositories in multiple VCSes and did full imports.
- Particularly, I reimported Arcanist to make sure that TODO was resolved. I think it was related to the toposort stuff.
- Pushed commits to multiple VCSes.
- Pushed commits to a non-close branch, then pushed a merge commit. Observed commits import initially as non-close, then get flagged for close.
- Started full daemons and resolved various minor issues that showed up in the daemon log until everything ran cleanly.
- Basically spent about 30 minutes banging on this in every way I could think of to try to break it. I found and fixed some minor stuff, but it seems solid.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4327
Differential Revision: https://secure.phabricator.com/D7987
Summary:
Ref T4327. Simplify the git discovery process so I can move it to the DiscoveryEngine, so I can make change parsing testable.
In particular:
- As an optimization, we process closeable branches ("master") first, then process uncloseable branches ("epriestley-devel"). This means that in the common case we can insert a commit as closeable immediately when it is discovered, the first pass through the pipeline will get it right, and the "ref update" step will never need to do any meaningful work.
- Commits which do not initially appear on a closeable branch, but later move to one (via merges or ref moves) will now be caught in the ref update step, have the closeable flag set, and have a message step re-queued.
- We no longer need to do a separate discovery step on closable branches.
- We no longer need to keep track of `seenOnBranches`.
Test Plan: Ran discovery on repositories after pushing commits, got reasonable results.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4327
Differential Revision: https://secure.phabricator.com/D7985
Summary:
Ref T4327. This provides a more general RefCursor-based way to identify closeable commits, and moves away from the messy `seenOnBranches` stuff. Basically:
- When a closeable ref (like the branch "master") is updated, query the VCS for all commits which are ancestors of the new ref, but not ancestors of the existing closeable heads we previously knew about. This is basically all the commits which have been merged or moved onto the closeable ref.
- Take these commits and set the "closeable" flag on the ones which don't have it yet, then queue new tasks to reprocess them.
I haven't removed the old stuff yet, but will do that shortly.
Test Plan:
- Ran `bin/repository discover` and `bin/repository refs` on a bunch of different VCSes and VCS states. The effects seemed correct (e.g., new commits were marked as closeable).
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4327
Differential Revision: https://secure.phabricator.com/D7984
Summary:
Ref T4327. I want to make change parsing testable; one thing which is blocking this is that the Git discovery process is still part of `PullLocal` daemon instead of being part of `DiscoveryEngine`. The unit test stuff which I want to use for change parsing relies on `DiscoveryEngine` to discover repositories during unit tests.
The major reason git discovery isn't part of `DiscoveryEngine` is that it relies on the messy "autoclose" logic, which we never implemented for Mercurial. Generally, I don't like how autoclose was implemented: it's complicated and gross and too hard to figure out and extend.
Instead, I want to do something more similar to what we do for pushes, which is cleaner overall. Basically this means remembering the old branch heads from the last time we parsed a repository, and figuring out what's new by comparing the old and new branch heads. This should give us several advantages:
- It should be simpler to understand than the autoclose stuff, which is pretty mind-numbing, at least for me.
- It will let us satisfy branch and tag queries cheaply (from the database) instead of having to go to the repository. We could also satisfy some ref-resolve queries from the database.
- It should be easier to extend to Mercurial.
This implements the basics -- pretty much a table to store the cursors, which we update only for Git for now.
Test Plan:
- Ran migration.
- Ran `bin/repository discover X --trace --verbose` on various repositories with branches and tags, before and after modifying pushes.
- Pushed commits to a git repo.
- Looked at database tables.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4327
Differential Revision: https://secure.phabricator.com/D7982
Summary: Ref T4327. Moves us one small step forward toward testable change parsers by separating out this unrelated logic from the PullLocal daemon. We will also probably want to run this logic so we can do remote path lookups to limit the role of Arcanist Projects in the future, which is why I made the URI type (here, only "git") a parameter rather than calling this a `GitURINormalizer` or something.
Test Plan:
- Ran unit tests.
- Ran `repository discover` on a correctly-configured remote repository.
- Ran `repository discover` on an incorrectly-configured remote, got an error message.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4327
Differential Revision: https://secure.phabricator.com/D7981
Summary: doh
Test Plan: no more fatal on home page
Reviewers: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7993
Summary: ...needs to add a LegalpadDocumentSignatureQuery class to get this done, which is also re-deployed everywhere we were issuing raw queries. Ref T3116.
Test Plan: viewed some signatures. Verified color and footer icons showed up how I wanted them to.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T3116
Differential Revision: https://secure.phabricator.com/D7986
Summary:
From @chad. This setup link should open in a new window so you don't lose your context in resolving setup issues.
@chad, this was the only one I could find immediately, let me know if you remember seeing others that I missed.
Test Plan: Faked an error, clicked the link, got a new tab.
Reviewers: chad, btrahan
Reviewed By: chad
CC: chad, aran
Differential Revision: https://secure.phabricator.com/D7991
Summary: Cookie-prefix should fix phabricator instances where x.com and x.y.com have conflicting cookie names
Test Plan: Pushed branch to dev.phab.example.com, logged into phab.example.com and into dev.phab.example.com.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7979
Summary:
does a few smallish things... Ref T3116
- adds an action to "sign document", thus improving visiblity of this feature from 0 to some value more than 0
- adds a crumb on the edit page to get back to the view page
- warns the user on the edit page IFF signatures exist for the current version that their edits could invalidate those signatures
- adds a "needSignatures" option to the Document Query class
Test Plan: click the new UI elements and they worked. edited a document with signatures, noted warning UI, edited anyway, noted warning UI correctly disappeared on new edit. also verified a single signature had the correct translation
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T3116
Differential Revision: https://secure.phabricator.com/D7983
Summary:
Ref T4310. Fixes T3720. This change:
- Removes concurrent session limits. Instead, unused sessions are GC'd after a while.
- Collapses all existing "web-1", "web-2", etc., sessions into "web" sessions.
- Dramatically simplifies the code for establishing a session (like omg).
Test Plan: Ran migration, checked Sessions panel and database for sanity. Used existing session. Logged out, logged in. Ran Conduit commands.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4310, T3720
Differential Revision: https://secure.phabricator.com/D7978
Summary:
Ref T3116. This creates a policy rule where you can require a signature on a given legalpad document.
NOTE: signatures must be for the *latest* document version.
Test Plan: made a task have a custom policy requiring a legalpad signature. verified non-signers were locked out.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T3116
Differential Revision: https://secure.phabricator.com/D7977
Summary:
Ref T3720. Ref T4310. Currently, we limit the maximum number of concurrent sessions of each type. This is primarily because sessions predate garbage collection and we had no way to prevent the session table from growing fairly quickly and without bound unless we did this.
Now that we have GC (and it's modular!) we can just expire unused sessions after a while and throw them away:
- Add a `sessionExpires` column to the table, with a key.
- Add a GC for old sessions.
- When we establish a session, set `sessionExpires` to the current time plus the session TTL.
- When a user uses a session and has used up more than 20% of the time on it, extend the session.
In addition to this, we could also rotate sessions, but I think that provides very little value. If we do want to implement it, we should hold it until after T3720 / T4310.
Test Plan:
- Ran schema changes.
- Looked at database.
- Tested GC:
- Started GC.
- Set expires on one row to the past.
- Restarted GC.
- Verified GC nuked the session.
- Logged in.
- Logged out.
- Ran Conduit method.
- Tested refresh:
- Set threshold to 0.0001% instead of 20%.
- Loaded page.
- Saw a session extension ever few page loads.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4310, T3720
Differential Revision: https://secure.phabricator.com/D7976
Summary:
Ref T4310. Ref T3720. Two major things are going on here:
- I'm making this table work more like a standard table, which, e.g., makes `delete()` simpler to implement.
- Currently, the primary key is `(userPHID, type)`. I want to get rid of this, issue unlimited sessions, and GC old sessions. This means we can't have a unique key on `(userPHID, type)` anymore. This removes it as the primary key and adds it as a normal key instead. There's no functional change -- the code to generate sessions guarantees that it will never write duplicate rows or write additional rows -- but allows us to drop the `-1`, `-2` qualifiers in the future.
- Also of note, our task is made far simpler here because MySQL will automatically assign values to new `AUTO_INCREMENT` columns, so we don't have to migrate to get real IDs.
Test Plan: Ran migrations, verified table looked sane. Logged out, logged in.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3720, T4310
Differential Revision: https://secure.phabricator.com/D7975
Summary: This modularizes the rest of the GC submethods. Turned out there was nothing tricky.
Test Plan: Ran `bin/phd debug garbage` and got reasonable looking behavior and output.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7971
Summary:
The GC is a big block of hard-coded application GCs right now. Among other things, this means third parties can't tap into the infrastructure.
Modularize it into `GarbageCollector` classes. This implements only one to prove the new stuff works; I'll followup with the rest in the next diff or few depending on how much mess I run into.
Test Plan: Used `bin/phd debug garbage` to run the collector in debug mode, observed reasonable output and behavior.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7970
Summary: Adds "verified" and "secretKey" to Legalpad document signatures. For logged in users using an email address they own, things are verified right away. Otherwise, the email is sent a verification letter. When the user clicks the link the signature is marked verified.
Test Plan: signed the document with a bogus email address not logged in. verified the email that would be sent looked good from command line. followed link and successfully verified bogus email address
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran, asherkin
Maniphest Tasks: T4283
Differential Revision: https://secure.phabricator.com/D7930
Summary: Fixes T4317. Update the "inline comment" control to a RemarkupControl. This could maybe use some padding/spacing/design touches eventually but seems OK for the moment.
Test Plan: {F101825}
Reviewers: chad, btrahan
Reviewed By: chad
CC: chad, aran
Maniphest Tasks: T4317
Differential Revision: https://secure.phabricator.com/D7969
Summary: Fixes T3857. Earlier work made this trivial and just left product questions, which I've answered by requiring the daemons to run on reasonable installs.
Test Plan: Ran `bin/search index` and `bin/search index --background`. Observed indexes write in the former case and tasks queue in the latter case. Commented with a unique string on a revision and searched for it a moment later, got exactly one result (that revision), verifying that reindexing works correctly.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3857
Differential Revision: https://secure.phabricator.com/D7966
Summary:
Ref T3857.
- Always send mail via daemons. This lets us get rid of this config, and is generally much more performant.
- After D7964, we warn if daemons aren't running.
Test Plan: Sent some mail.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3857
Differential Revision: https://secure.phabricator.com/D7965
Summary:
Currently, we try to mostly-kind-of-work if daemons aren't running (for example, we send mail in-process). I want to stop doing this. A major motivator is that `metamta.send-immediately` is confusing for a lot of users and frequently the cause of performance problems. Increasingly, functionality of applications depends on the daemons (Harbormaster, Drydock, Nuance all require daemons to do anything at all). They're also fairly stable/robust/well-tested and no reasonable install should be running without them.
This will let us simplify or remove some flags (like `metamta.send-immediately`) and simplify some other processes like search indexing.
Test Plan: Stopped daemons, loaded warnings, saw daemon warning. Started daemons, reloade, no warning.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3857
Differential Revision: https://secure.phabricator.com/D7964
Summary: Ref T4310. Ref T3720. We use bare strings to refer to session types in several places right now; use constants instead.
Test Plan: grep; logged out; logged in; ran Conduit commands.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4310, T3720
Differential Revision: https://secure.phabricator.com/D7963
Summary: Ref T4310. Ref T3720. Session operations are currently part of PhabricatorUser. This is more tightly coupled than needbe, and makes it difficult to establish login sessions for non-users. Move all the session management code to a `SessionEngine`.
Test Plan:
- Viewed sessions.
- Regenerated Conduit certificate.
- Verified Conduit sessions were destroyed.
- Logged out.
- Logged in.
- Ran conduit commands.
- Viewed sessions again.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4310, T3720
Differential Revision: https://secure.phabricator.com/D7962
Summary: Adds the ability to set icons into Tags.
Test Plan: tested on UIExamples page.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7961
Summary: Ref T4310. Ref T3720. Partly, this makes it easier for users to understand login sessions. Partly, it makes it easier for me to make changes to login sessions for T4310 / T3720 without messing anything up.
Test Plan: {F101512}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3720, T4310
Differential Revision: https://secure.phabricator.com/D7954
Summary:
Ref T4310. This is a small step toward separating out the session code so we can establish sessions for `ExternalAccount` and not just `User`.
Also fix an issue with strict MySQL and un-admin / un-disable from web UI.
Test Plan: Logged in, logged out, admined/de-admin'd user, added email address, checked user log for all those events.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4310
Differential Revision: https://secure.phabricator.com/D7953
Summary: Add the 'Depends On' field to releeph requests. This will help the release engineers to be aware of the dependencies and make sure pick them altogether.
Test Plan: Check sandbox. This field shows up when a revision has some dependencies.
Reviewers: JoelB, lifeihuang, epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7946
Summary: See IRC. This is a likely fix for @DctrWatson's error: we're returning `null` but should return `array()` to indicate no values.
Test Plan: Will make @DctrWatson do it.
Reviewers: btrahan
Reviewed By: btrahan
CC: dctrwatson, aran
Differential Revision: https://secure.phabricator.com/D7950
Summary: This might be `null`.
Test Plan: Loaded, got exception, applied patch, no exception. Viewed a method with an actual message too, that also worked.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D7955
Summary: Ref T1344. We try to do a bad edge query with no sources right now if there are no tasks in a project.
Test Plan:
- Hit exception, applied patch, no exception.
- Other boards still have tasks.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T1344
Differential Revision: https://secure.phabricator.com/D7951
Summary:
Ref T1344. When rendering a task's projects, add "(Board)" afterward if the task is on a non-default board.
This is mostly a "get the data there" change, we can probably make the design nicer.
Test Plan: {F101232}
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1344
Differential Revision: https://secure.phabricator.com/D7945
Summary: Ref T1344. Write edges and read them when reloading the board.
Test Plan: After reload, stuff stays mostly where I put it. In-column order isn't always persisted correctly yet.
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1344
Differential Revision: https://secure.phabricator.com/D7944
Summary: Ref T1344. Makes requests to the server, which are received and ignored. Performs appropriate locking/unlocking/enabling/disabling on the client.
Test Plan: Dragged stuff around, saw it enable/disable/send correctly.
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1344
Differential Revision: https://secure.phabricator.com/D7943
Summary:
Ref T1344. Makes the UI/UX a little nicer; still no actual backend stuff. This changes:
- When you drop an item onto a different column, the item actually moves.
- Empty columns render with a special CSS class now, but no nodes in the list. This cleans up some JS jankiness. I made the "empty" columns have a light blue background for now. We could put some sort of subtle background image in them instead, or some kind of call to action if it's not redundant with other UI.
Test Plan: {F101208}
Reviewers: chad, btrahan
Reviewed By: chad
CC: chad, aran
Maniphest Tasks: T1344
Differential Revision: https://secure.phabricator.com/D7942
Summary:
Ref T1344. Allows you to drag tasks within a column and between columns, and handles all the multi-column state / targeting / ghosting stuff.
This is a UI-only change; you can't actually do anything meaningful with these yet.
Roughly, I added the idea of a DraggableList existing within a "group" of draggable lists. Normally, that group only has one item, but on boards it has all of the columns. Then I made all of the relevant operations just apply to the whole group of lists.
Test Plan:
- Verified existing funtionality in Maniphest and ApplicationSearch is unaffected, by dragging around tasks to reprioritize them and dragging around search items.
- Dragged tasks between columns on a board view.
{F101196}
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: chad, aran
Maniphest Tasks: T1344
Differential Revision: https://secure.phabricator.com/D7941
Summary:
Ref T2015. Several fixes:
- `checkForCancellation()` no longer exists, and isn't relevant for resumable stops. Throw it away for now.
- Fix an issue where a build could pass even if the final step failed.
- `phlog()` exceptions so they show up in `bin/harbormaster` and the daemon logs.
- Write an exception log if a step fails.
- Add a "throw an exception" step to debug this stuff more easily.
Test Plan:
- Grepped for `checkForCancellation()`.
- Ran a failing build where the final step caused the failure.
- Observed `phlog()` in `bin/harbormaster` output.
- Observed log in web UI:
{F101168}
Reviewers: btrahan, hach-que
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7935
Summary: Cleans up some older layouts to new stuffs.
Test Plan: Test with and without a diff ID.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7949
Summary:
Ref T1344. Autogenerates a "Backlog" column if one does not exist. Assigns all tasks to the backlog column.
For now, this column is always called "Backlog", but we could let it be called other things later.
Test Plan: Loaded a project, got a backlog column, created some columns.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T1344
Differential Revision: https://secure.phabricator.com/D7938
Summary: Ref T1344. Minor tweaks for crumb/link stuff -- @mikn has been doing some work here recently and I want to unblock him.
Test Plan: Viewed board; viewed column edit screen.
Reviewers: chad, btrahan
Reviewed By: chad
CC: mikn, aran
Maniphest Tasks: T1344
Differential Revision: https://secure.phabricator.com/D7937
Summary: Made the edit path of the Edit controller work (before only create worked), also added in the link for the cog icon to actually land you on the edit page for the correct column. Some cleanup too. *cough*
Test Plan:
Click on gear
Look at fancy title you are about to edit
Change it
Enjoy changed title
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7933
Summary:
Fixes T4306. We should clear notifications about a question and its answers when viewing a question page.
(Eventually we might have an answer detail page and send the notification there, and then only clear there, but this cleans things up for now.)
Test Plan: Loaded question page, verified answers appeared as page objects.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T4306
Differential Revision: https://secure.phabricator.com/D7928
Summary: This removes the bulk of the "Form Errors" text, some variations likely exists. These are a bit redundant and space consuming. I'd also like to back ErrorView more into PHUIObjectBox.
Test Plan: Test out the forms, see errors without the text.
Reviewers: epriestley, btrahan
CC: Korvin, epriestley, aran, hach-que
Differential Revision: https://secure.phabricator.com/D7924
Test Plan: Did searches in Diffusion using all 3 Hosted values
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7927
Summary: This adds in the create flow for the Project board columns on the super secret board page which totally doesn't do anything right now.
Test Plan:
1. Apply diff.
2. Go to super secret page.
3. Click link close to top with a way too long name.
4. Enter a name for the column.
5. Enjoy a new column briefly before realising you cannot remove it.
6. Stay happy!
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: tmaroschik, Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7925
Summary: This also cleans up some code a little bit. Most of the gymnastics are to make sure we call `needProjectPHIDs()` appropriately.
Test Plan: Created new commit and revision rules with this field. Ran commits and revisions through the test console. Field behavior seemed correct.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, dctrwatson
Differential Revision: https://secure.phabricator.com/D7923
Summary: Ref T2015. Allow configuration of default edit/view policies for blueprints. Add create policy. Remove administrative exception in policies.
Test Plan: Configured these settings and created (or, with a restrictive create setting, tried to create) blueprints.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7921
Summary:
Ref T2015. Adds human-readable names to Drydock blueprints.
Also the new patches stuff is so much nicer.
Test Plan: Edited, created, and reviewed migrated blueprints.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7918
Summary:
Via Asana. The tags on Differential mail are wrong in two cases:
- Transactions which submit inline comments but no comment text are not labeled as "comments", but should be.
- Non-close, non-comment transactions are not labeled at all, but should be labeled "other".
Test Plan: Submitted a no-comments, inlines-only transaction and got a message with proper `X-Phabricator-Mail-Tags` header.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7912
Summary: Two basic changes here, first we fixed up the Diffusion headers to roll out more PHUIObjectBoxes. Second we added some specific styles for when Errors are inside an ObjectBox at the first position.
Test Plan: Tested a number of different layouts for browsing respositories as well as wherever I could find cases with PHUIObjectBox Form Errors (see images attached). Still some minor tightening due after this diff, but didnt want to overload it.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7914
Test Plan: Created comments with 'silent' both true and empty, received notifcation for only the latter.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7916
Summary: Minor, sets the list to flush to invoke the correct CSS for the ObjectBox.
Test Plan: Reload Page
Reviewers: epriestley, btrahan
Reviewed By: btrahan
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7909
Summary: Ref T2015. This workflow is a little weird (runs in a dialog, no edit-before-create step, lots of internal classnames). Make it a little more standard.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7908
Summary: Fixes T4290. At least one of the fields (`realname`) may have a list of items, and `strlen(array('first', 'last'))` produces the warning and stack trace in T4290.
Test Plan:
- Edited `realname` from an array value to an array value.
- Hit error.
- Applied patch.
- No more error.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4290
Differential Revision: https://secure.phabricator.com/D7905
Summary: use the loadReviewedBy function, which seems to do what we want -- returns a reviewer IFF the last thing was an accept
Test Plan: i believe in the power of loadReviewedBy
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran, aarwine
Differential Revision: https://secure.phabricator.com/D7903
Summary: Ref T4289. Make it clear that this provider does not currently work with JIRA 5.
Test Plan: Viewed JIRA provider from `/auth/`, saw warnings.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T4289
Differential Revision: https://secure.phabricator.com/D7906
Summary:
Updates table design to use new standards, work well in PHUIObjectBox. Fixes T4142
Comma
Test Plan: Tested on Diffusion, Settings, will roll out to more places soon
Reviewers: epriestley, btrahan
CC: Korvin, epriestley, aran
Maniphest Tasks: T4142
Differential Revision: https://secure.phabricator.com/D7901
Summary: See github issue 413. This diff adds color to the commit view as the user expects *AND* adds green to both audit and commit views. I looked in the history (D6184) and I can't tell how expected green was, but it feels nice to me given differential color coding.
Test Plan: looked at lists of audits and commits with pretty colors.
Reviewers: epriestley, chad
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7900
Summary: Ref T1049. Creates convenience actions at the Buildable level to stop, resume, or restart all builds.
Test Plan:
- Stopped all builds.
- Resumed all builds.
- Restarted all builds.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7899
Summary:
Ref T1049. Improves the UI:
- Pending commands, like "stopping", are shown separately from the current status.
- Pending commands are shown on the list view.
- Builds can be restarted, stopped and resumed from the list view.
- Add a missing crumb.
Test Plan:
{F99022}
{F99023}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7898
Summary: Ref T1049. The logic in the BuildEngine is a little different from the logic on the Build itself. Make these more consistent, and make queued commands more private.
Test Plan: Restarted, stopped, and resumed a build.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7897
Summary:
Ref T1049. Currently you can cancel a build, but now that we're tracking a lot more state we can stop, resume, and restart builds.
When the user issues a command against a build, I'm writing it into an auxiliary queue (`HarbormasterBuildCommand`) and then reading them out in the worker. This is mostly to avoid race messes where we try to `save()` the object in multiple places: basically, the BuildEngine is the //only// thing that writes to Build objects, and it holds a lock while it does it.
Test Plan:
- Created a plan which runs "sleep 2" a bunch of times in a row.
- Stopped, resumed, and restarted it.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, chad
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7892
Summary:
Ref T1049. Currently, the Harbormaster worker looks like this:
foreach (step) {
run_step(step);
}
This means steps can't ever be run in parallel. Instead, split it into two workers. The "Build" worker starts things off, and basically does:
update_build();
(We could theoretically do this in the original process because it should never take very long, but since there's a lock and it's a little bit complex it seemed cleaner to separate it.)
The "Target" worker runs an individual target (like a command, or an HTTP request, or whatever), then updates the build:
run_one_step(step);
update_build();
The new `update_build()` mechanism in `HarbormasterBuildEngine` does this, roughly:
figure_out_overall_status_of_all_steps();
if (build is done) { done(); }
if (build is fail) { fail(); }
foreach (step that is ready to run) {
queue_target_worker_for_step(step);
}
So, overall:
- The part of the code that updates Builds is completely separated from the part of the code that updates Targets.
- Targets can run in parallel.
Test Plan:
- Ran a bunch of builds via `bin/harbormaster build`.
- Ran a bunch of builds via web UI.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7890
Summary:
If you have private replies on and a Macro reply handler set, we try to access `getMailKey()` and fail. See P1039 for a trace.
(Thanks to @Korvin for picking this up.)
Test Plan: Set configuration, repro'd the exception, applied the patch, then disabled/enabled a macro.
Reviewers: btrahan
Reviewed By: btrahan
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D7896
Summary: "Run" is clearer than "Apply". This has already been changed in Harbormaster itself.
Test Plan: used eyeballs
Reviewers: btrahan, zeeg
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7889
Summary:
Fixes T4276. This adds "Change is enormous" to pre-commit content rules so we can, e.g., just reject these and not worry about them elsewhere.
Also, use the same numeric limits across the mechanisms so there's a consistent definition of an "enormous" changeset.
Test Plan:
- Set enormous limit to 15 bytes, pushed some changes, got blocked by a rule.
- Set it back, pushed OK.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4276
Differential Revision: https://secure.phabricator.com/D7887
Summary:
pretty simple. did the bare minimum in the editor, etc. to be able to create an item from the conduit console.
I put the work in the editor for initializing new values, rather than some initializeNewItem method, mainly because Items don't have policy directly but instead policy will be defined by the queue(s) the item is in. The editor is definitely going to host this work, so it felt like it might be better to do it this way in time...? anyway, easy to make an initializeNew method instead if you want to have that paradigm going all the time.
Test Plan: made an item from teh conduit console - success. verified errors for missing data as well
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7879
Summary: if you rename a project in such a way that the old slug and the new slug are the same, there are errors when the phriction document is updated. detect this case and don't bother updating the document since there is no change. Fixes Github issue 474.
Test Plan: made a project "testTest". Viewed the wiki page. Created the wiki page. Renamed the project "TestTest". Before patch, this error'd, post patch it works!
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7888
Summary:
Ref T4276. When a change is larger than 2GB, PHP can not read the entire change into a string, so Herald can not process it.
Additionally, we already have a time limit for practical reasons, but it's huge (probably incorrectly). To deal with these things:
- Add an optional byte limit to `diffusion.rawdiffquery`.
- Make the query with a 1GB limit.
- Reduce the diff timeout from 15 hours to 15 minutes.
- Add a "Changeset is enormous" field. This field is true for changes which are too large to process.
This generally makes behaviors more sane:
- We'll always make progress in Herald in a reasonable amount of time.
- Installs can write global rules to handle (or reject) these types of changes.
Test Plan: Set limit to 25 bytes instead of 1GB and ran test console on various changes.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4276
Differential Revision: https://secure.phabricator.com/D7885
Summary:
Fixes T4189. Ref T4151. Allows repositories to have additional custom hooks for operations which can't be expressed with Herald (one such operation is lint).
This adds only local hook directories, since they're easier to use with existing hooks than global directories. I might add global directories eventually.
This doesn't support Mercurial since we have no demand for it and it's more complicated (we lose compatibility and power by just dropping a `hooks.d/` somewhere).
Test Plan:
- Pulled hosted SVN and Git repos to verify the hook directories generate correctly.
- Added a variety of hooks to the hook directories (echo + pass, fail).
- Pushed commits and verified the hooks fired (output expected info, or failed).
- Verified push log reflected the correct error code ("3", external) and detail ("nope.sh") when rejecting.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4151, T4189
Differential Revision: https://secure.phabricator.com/D7884
Summary:
Fixes T4264. Adds:
- New "Repository's projects" field to Herald pre-commit rules, so you can write global rules which act based on projects.
- Allows pre-ref/pre-content rules to bind to projects, and fire for all repositories in that project, so users with limited power can write rules which apply to many repositories.
- The pre-ref and pre-content classes were starting to share a fair amount of code, so I made them both extend an abstract base class.
Test Plan: Wrote new pre-ref and pre-content rules bound to projects, then pushed commits into repositories in those projects and not in those projects. The "repository projects" field populated, and the rules fired for repositories in the relevant projects.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4264
Differential Revision: https://secure.phabricator.com/D7883
Summary: Ref T4264. Ref T4262. Ref T2628. Ref T3190. To write Herald object rules which bind to a project, I want to take the low budget approach and have the user just type `#project` into a text field. Formally recognize `#project` as an object name, by moving all the existing stuff from the remarkup rule to the PHID type declaration.
Test Plan: Typed `#project` into jump nav and `phid.lookup` in Conduit. Typed `#project` into Remarkup.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3190, T4264, T2628, T4262
Differential Revision: https://secure.phabricator.com/D7882
Summary: Ref T4264. Ref T2628. Ref T3102. Allows you to associate repositories with projects. In the future, you'll be able to write Herald object rules against projects, use Herald fields like "Repository's projects", and search by project.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3102, T4264, T2628
Differential Revision: https://secure.phabricator.com/D7881
Summary:
~~Set PATH for repository's hook, so the environment.append-paths can used~~
repository's hook may can't find php path if user's profile like bash_profile is not loaded.
Test Plan: check the hook generated is contain the right path
Reviewers: epriestley, #blessed_reviewers
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7743
Summary:
Ref T4222. Currently, CelerityResourceResponse holds response resources in flat maps. Instead, specify which map resources appear in.
Also, provide `requireResource()` and `initBehavior()` APIs on the Controller and View base classes. These provide a cleaner abstraction over `require_celerity_resource()` and `Javelin::initBehavior()`, but are otherwise the same. Move a few callsites over.
Test Plan:
- Reloaded pages.
- Browsed around Differential.
Reviewers: btrahan, hach-que
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4222
Differential Revision: https://secure.phabricator.com/D7876
Summary:
Repositories currently have a no-UI "shortcut" feature which is only used by Facebook (and I'm not sure it's even used). As implemented, this feature is policy-oblivious and kind of nonsensical. Throw it away.
I'm open to reimplementing this, but I want to see some level of interest in it before I do. The new implementation would add shortcuts to each repository, similar to how mirrors work. My original plan was to follow this up with such an implementation (it's half-implemented in my sandbox), but as I worked through it I'm not sure it's really valuable.
Test Plan: Browsed repository list, grep.
Reviewers: btrahan
Reviewed By: btrahan
CC: FacebookPOC, aran
Differential Revision: https://secure.phabricator.com/D7862
Summary: Ref T4222. This doesn't actually support multiple sources yet, but moves us closer by getting rid of some dead and exceedingly-singletoney code.
Test Plan: Browsed around, looked at Phame blogs.
Reviewers: btrahan, hach-que
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T4222
Differential Revision: https://secure.phabricator.com/D7874
Summary:
Ref T4222. This fixes some issues with Phame's resource construction.
Phame requires a fully virtual resource source, and since I want to run wordpress templates unmodified some day I don't want to build resource maps for skins.
Move all the stuff that depends on resource lists being discoverable at build time to `CelerityPhysicalResources`, and only generate maps for subclasses.
The root `CelerityResources` can now construct virtual resources; construct a virtual resource for Phame and use it.
Test Plan: Off-domain blogs work correctly now. On-domain blogs with custom skins work correctly now.
Reviewers: btrahan, hach-que
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T4222
Differential Revision: https://secure.phabricator.com/D7873
Summary:
Ref T4222.
- Removes the old map and changes the CelerityResourceMap API to be entirely driven by the new map.
- The new map is about 50% smaller and organized more sensibly.
- This removes the `/pkg/` URI component. All resources are now required to have unique names, so we can tell if a resource is a package or not by looking at the name.
- Removes some junky old APIs.
- Cleans up some other APIs.
- Added some feedback for `bin/celerity map`.
- `CelerityResourceMap` is still a singleton which is inextricably bound to the Phabricator map; this will change in the future.
Test Plan:
- Reloaded pages.
- Verified packaging works by looking at generated includes.
- Forced minification on and verified it worked.
- Forced no-timestamps on and verified it worked.
- Rebuilt map.
- Ran old script and verified error message.
- Checked logs.
Reviewers: btrahan, hach-que
Reviewed By: hach-que
CC: chad, aran
Maniphest Tasks: T4222
Differential Revision: https://secure.phabricator.com/D7872
Summary: Ref T4222. These are the last two "return a big ball of mud" methods. Make the API stronger so I can swap out the implementations.
Test Plan: Reloaded pages.
Reviewers: btrahan, hach-que
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T4222
Differential Revision: https://secure.phabricator.com/D7871
Summary: Ref T4222. Same deal as D7867, but for this other super nebulous "return a blob of stuff" method.
Test Plan: Regenerated map, browsed around, etc.
Reviewers: btrahan, hach-que
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T4222
Differential Revision: https://secure.phabricator.com/D7868
Summary: Ref T4222. This was used by Facebook while developing Releeph, but should no longer be necessary since Releeph is in the upstream. I can't get an answer out of Facebook about whether they still use it or not (see T4227), so nuke it. We're going to replace it with a more general mechanism (see T4222).
Test Plan: Regenerated celerity map. Browsed some pages, still got resources.
Reviewers: btrahan, hach-que
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T4222
Differential Revision: https://secure.phabricator.com/D7863
Summary: This removes the people box and adds a members property list item it's place. We may want some show/hide/see all if a project has more than //n// members, but these seems more reasonable than previous layout.
Test Plan: Tested a project with and without members, grepped for removed CSS, and tested mobile and desktop layouts.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7870
Summary: SInce we added the background color, no need to add extra padding for ObjectItemList.
Test Plan: reload a project page, no white padding in object box.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7866
Summary: Currently we markup `rXabcd`, but not `rX` on its own. Mark these up as repository object names.
Test Plan: Typed `rPOEMS`, `rPOEMS1`, `rPOEMS139893189`, etc.
Reviewers: btrahan, dctrwatson
Reviewed By: btrahan
CC: aran, poop
Differential Revision: https://secure.phabricator.com/D7859
Summary: Ref T4136. After Passphrase, user policies work correctly in this dropdown. Providing this option improves consistency and makes it easier to create, e.g., a private repository (where "no one" does not include the viewer, because they don't own the resulting object).
Test Plan: Set an object's policy to my user policy.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4136
Differential Revision: https://secure.phabricator.com/D7858
Summary:
Fixes T4242. It's currently possible to set nonsense defaults and create repositories with unintended policies, because policy configuration isn't part of creation. Instead:
- put a policy page into the creation workflow;
- require the selection of valid policies (i.e., prevent creating a repository you can't view / edit).
Test Plan:
- Created imported and hosted repositories, hit policy selection.
- Edited policies of existing repositories.
- Tried to set nonsense policies.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4242
Differential Revision: https://secure.phabricator.com/D7856
Summary:
Ref T4264. Allows you to create "Object" rules, in addition to Global and Personal rules. If you choose to create an Object rule, you'll be prompted to select an object on a new screen. You must be able to edit and object in order to create rules for it.
Ref T3506. This makes "All" the default filter for the transcript view, which should reduce confusion on smaller installs.
Test Plan:
- Created non-object rules.
- Created object rules.
- Triggered object rules against matching and unmatching objects.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3506, T4264
Differential Revision: https://secure.phabricator.com/D7853
Summary: Ref T4264. Lays the groundwork for new "Object" rule types. Prevents personal "Hook" rules, which don't make any sense.
Test Plan: Created new Maniphest (global/personal available) and Ref Hook (global only) rules.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4264
Differential Revision: https://secure.phabricator.com/D7852
Summary:
If the repo isn't bare, than we need copy it's remote instead of using it.
This will probably not work if an SSH key is provided to phabricator, and in any case you must delete
all workspaces that were already created.
This will make landing those repos slower; I plan to just delete and re-clone all repos on my instance.
It will probably be simpler to just make a bare-repo a requirement of all the git-landing work.
Test Plan: landed from hosted and un-hosted repos, checked git-remote url in each newly cloned workspace.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7592
Summary: Some discussion on IRC. This is more consistent with other disabled items, which are click-to-explain.
Test Plan: Viewed UI, clicked link.
Reviewers: btrahan, dctrwatson, asherkin
Reviewed By: asherkin
CC: aran
Differential Revision: https://secure.phabricator.com/D7857
Summary:
Fixes T4270. When you download raw file content, diffs, and patches we currently give them default (all users) visibility.
Instead, bind them to the repository or revision in question.
(This code could use a bit of cleanup at some point.)
Test Plan: Hit the patch and content download links in Diffusion and the patch download link in Differential, got restricted files with accurate policy bindings.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4270
Differential Revision: https://secure.phabricator.com/D7849
Summary:
Ref T4264. This gets most of the plumbing in for "object" rules, which will bind to a specific object, like a repository or project.
It does not yet let you actually create these rules.
Test Plan: Ran `storage upgrade`, created/edited rules, browsed Herald.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4264
Differential Revision: https://secure.phabricator.com/D7847
Summary: Ref T4264. Instead of a dropdown, make this step more informative.
Test Plan: {F93928}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4264
Differential Revision: https://secure.phabricator.com/D7846
Summary:
Ref T4264. Currently, you choose a rule's content type (revision, commit, hook) and rule type (global, personal) on the same screen.
- I want to make some rule types unavailable for some content types (e.g., personal hooks make little sense).
- I want to make content type selection use a radio control instead of a dropdown, so it can explain what the content types do in more detail.
- For new "object" hooks, I want to add a third step where you'll pick an object to bind to.
Split rule creation out into two steps. I think this won't get complicated enough for `PHUIPagedFormView`, but maybe I'll swap it in if this gets messier than I think.
Test Plan: Created some Herald rules, used back/cancel/etc.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4264
Differential Revision: https://secure.phabricator.com/D7845
Summary: If `0` isn't an ancestor of the current branch, the `0::x` construction fails. This is uncommon, but not wildly unreasonable. The `ancestors()` construction is simpler anyway.
Test Plan: Viewed some `hg` repos locally (change history, file history) without anything suspicious cropping up.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7844
Summary:
Ref T4195. A legitimate rule which needs this field is "do not allow commits as root". Interestingly, we have exactly one commit as root in each Phabricator, Arcanist and libphutil.
Since the committer and author don't need to be Phabricator accounts (just the Pusher), the existing "Committer" and "Author" fields can't express this rule (they'll be empty).
Test Plan: {F93406}
Reviewers: btrahan
Reviewed By: btrahan
CC: SEJeff, aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7841
Summary:
Ref T2015. Not directly related to Drydock, but I bumped into this. All these scripts currently enumerate their workflows explicitly.
Instead, use `PhutilSymbolLoader` to automatically discover workflows. This reduces code duplication and errors (see all the bad `extends` this diff fixes) and lets third parties add new workflows (not clearly valuable?).
Test Plan: Ran `bin/x help` for each modified script.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7840
Summary:
Ref T2015. Not directly related to Drydock, but I've wanted to do this for a bit.
Introduce a common base class for all the workflows in the scripts in `bin/*`. This slightly reduces code duplication by moving `isExecutable()` to the base, but also provides `getViewer()`. This is a little nicer than `PhabricatorUser::getOmnipotentUser()` and gives us a layer of indirection if we ever want to introduce more general viewer mechanisms in scripts.
Test Plan: Lint; ran some of the scripts.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7838
Summary: Ref T2015. All the Drydock query classes share the application method; move it into a shared base class to slightly shrink the codebase.
Test Plan: Browsed query UIs.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7837
Summary:
Ref T2015. Moves a bunch of raw object loads into modern policy-aware queries.
Also straightens out the Log and Lease policies a little bit: there are legitimate states where these objects are not attached to a resource (particularly, while a lease is being acquired). Handle these more gracefully.
Test Plan: Lint / browsed stuff.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7836
Summary:
Ref T2015. Currently, Drydock has a `wait-for-lease` workflow which is invoked in the background by the `lease` workflow.
The goal of this mechanism is to allow `bin/drydock lease` to print out logs as the lease is acquired. However, this predates the `runAllTasksInProcess` flags, and they provide a simpler and more robust way (potentially with `--trace` and `PhutilConsole`) to do synchronous execution and debug logging.
Simplify this whole mechanism: just run everything in-process in `bin/drydock lease`, and do logging via `--trace`. We could thread a `PhutilConsole` through things too, but this seems good enough for now.
Also various cleanup/etc.
Test Plan: Ran `bin/drydock lease`. Ran `bin/harbormaster build X --plan Y`, for `Y` being a Drydock-dependent build plan.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7835
Summary: Ref T4266. This implements rules similar to the old rules. With D7842, maybe this is reasonable? I think it's not like grotesquely bad, at least.
Test Plan: See screenshot.
Reviewers: chad, wrotte
Reviewed By: chad
CC: aran
Maniphest Tasks: T4266
Differential Revision: https://secure.phabricator.com/D7843
Summary:
Ref T2015. After introducing ApplicationSearch, the left nav turned into a soupy mess. Split the major sections into four separate areas, and unify them with a simple console.
This also reverts all the prefix stuff, since the results were awful and I don't anticipate it ever being the best solution to any UX problem.
Test Plan:
Browsed blueprints, resources, leases and logs.
Here's the new console:
{F93279}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7833
Summary: Ref T2015. Update DrydockLog for policy awareness and give it a policy query.
Test Plan: Browsed all the log interfaces.
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7831
Summary: Ref T2015. This turns the side nav into a bigger mess for now, but uses ApplicationSearch for blueprints.
Test Plan: Queried blueprints in the UI.
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7829
Summary:
Ref T2015. These never got updated to the new stuff, move them out of the old `Constants` class and let them load handles, etc.
Also some half-cleanup of some Blueprint/BlueprintImplementation stuff.
Test Plan: Used `phid.query` to query a Resource, Lease, and Blueprint.
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7828
Summary: See thread; fixes fatal. The actual name of this method is `getHarbormaster...`.
NOTE: This fixes a fatal in Differential which impedes review, so I'm pushing it as-is.
Test Plan: Browsed a revision.
Reviewers: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7834
Summary:
Ref T2015. Applies ApplicationSearch to DrydockLease.
This makes the left nav in Drydock a little funky. It will probably get worse for a bit before it gets better, since I want to bring everything to ApplicationSearch and then sort out the details.
Test Plan: Queried leases in Drydock.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7827
Summary: Ref T2015. DrydockLease predates widespread adoption of policies. Make it -- and its query -- policy aware.
Test Plan: Browsed leases from the web UI. Grepped for callsites.
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7826
Summary:
Ref T1049. Adds `bin/harbormaster` and `bin/harbormaster build` for applying plans from the console. Since this gets `--trace`, it's much easier to debug what's going on.
This doesn't work properly with some of the Drydock steps yet, I need to look at those. I think `setRunAllTasksInProcess` probably obsoletes some of the mechanisms. It might also not work with "Wait for Builds" but I didn't check.
Test Plan: Used `bin/harbormaster` to run a bunch of builds. Ran builds from web UI.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7825
Summary:
Ref T1049. Generally, it's useful to separate test/trial/manual runs from production/automatic runs.
For example, you don't want to email a bunch of people that the build is broken just because you messed something up when writing a new build plan. You'd rather try it first, then promote it into production once you have some good runs.
Similarly, test runs generally should not affect the outside world, etc. Finally, some build steps (like "wait for other buildables") may want to behave differently when run in production/automation than when run in a testing environment (where they should probably continue immediately).
So, formalize the distinction between automatic buildables (those created passively by the system in response to events) and manual buildables (those created explicitly by users). Add filtering, and stop the automated parts of the system from interacting with the manual parts (for example, we won't show manual results on revisions).
This also moves the "Apply Build Plan" to a third, new home: instead of the sidebar or Buildables, it's now on plans. I think this generally makes more sense given how things have developed. Broadly, this improves isolation of test environments.
Test Plan: Created some builds, browsed around, used filters, etc.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7824
Summary: Ref T1049. Adds "Repository", "Revision", "Diff" and "Commit" as searchable fields.
Test Plan: Used all the fields to filter things.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7823
Summary:
Fixes T4195. Allows you to write a rule against a commit's branches.
This completes outstanding work on T4195.
Test Plan: Pushed to Git and Mercurial repositories and verified branches were selected correctly by examining transcripts.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7820
Summary: See comments in <https://secure.phabricator.com/D6331#comment-3> -- make the Conduit Token and Conduit Certificate interfaces readonly and select-on-click.
Test Plan:
- Viewed `/conduit/token/`, verified it was readonly and selected on click.
- Viewed `/settings/panel/conduit/`, likewise.
Reviewers: Avish, btrahan, wotte
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7819
Summary:
Ref T4257. Currently, the pull logic looks like this:
if (new) {
create();
} else {
if (hosted) {
install_hooks();
} else {
update();
}
}
This means that the first time you run `repository pull`, hooks aren't installed, which makes debugging trickier. Instead, reorganize the logic:
if (new) {
create();
} else {
if (!hosted) {
update();
}
}
if (hosted) {
install_hooks();
}
Test Plan: Ran `bin/repository pull` on a new `hg` repo and got hooks installed immediately.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4257
Differential Revision: https://secure.phabricator.com/D7818
Summary:
Fixes T4257. The `hg heads` command exits with an error code and no output in an empty repository.
Just ignore the error code: we don't have a great way to distinguish between errors, and we ran another `hg` command moments before, so we have at least some confidence it isn't a PATH sort of thing.
Test Plan: Created a new Mercurial repository and pushed to hit the error in T4257. Applied this fix and got a clean push with an accurate push log.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4257
Differential Revision: https://secure.phabricator.com/D7817
Summary: A user is reporting a re-lock in this daemon, which I can't
reproduce, but might be possible if this throws. Stop it from throwing in
a way which evades unlock.
See: <https://github.com/facebook/phabricator/issues/476>
Auditors: btrahan
Summary: add support for "assignee" conditions
Test Plan: Create a Herald rule where condition is assignee, and create a task assign to someone.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7813
Summary:
Fixes two issues:
- When rendering a task's details, we currently issue a policy-oblivious query. Instead, issue a policy-aware query.
- The formatting is a little bit weird, with the top half in a box and the bottom half with an older style. Make them consistent.
Test Plan: Looked at the detail pages for several tasks in queue.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D7812
Summary:
Ref T4195. This allows you to write rules which disallow merge commits.
Also make the reject message a little more useful.
Test Plan:
remote: This push was rejected by Herald push rule H27.
remote: Change: commit/daed0d448404
remote: Rule: No Merges
remote: Reason: No merge commits allowed. If you must push a merge, include "@force-merge" in the commit message.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7809
Summary: Ref T4195. Ref T2783. We have an old-school implementation of this; move it into a LowLevel query and make callers all run through Conduit. I need the LowLevel query for hooks, to implement an "is merge commit" Herald rule.
Test Plan:
- Ran query via Conduit for SVN, Mercurial, Git.
- Parsed a commit which closed a revision, attach/closed worked correctly.
- Browsed Diffusion.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195, T2783
Differential Revision: https://secure.phabricator.com/D7808
Summary: Refs T4195. Fixes T3936. You can't currently write rules like "block commits unless they're attached to an **accepted** revision"; allow that.
Test Plan: Pushed commits into a rule with this field, saw it work / not crash.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, mbishopim3
Maniphest Tasks: T3936, T4195
Differential Revision: https://secure.phabricator.com/D7807
Summary: Ref T4195. Allows you to write revision-based commit hooks, e.g. block all commits with no corresponding revision.
Test Plan:
Here's are the fields populating:
{F90989}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7806
Summary: Ref T4195. I need to query commit metadata to figure out which revision a commit is associated with. Move this out of the MessageParser so the code can be called from the HookEngine.
Test Plan: Used `reparse.php` to reparse a variety of SVN, Mercurial and Git commits. Used `var_dump()` to verify sensible fields were returned.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7805
Summary: Ref T4195. I need this for the Herald pre-commit rules, and it generally simplifies things.
Test Plan: Used `reparse.php` plus `var_dump()` to inspect refs in Git, Mercurial and SVN repos. They all looked correct and reparsed correctly.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7804
Summary:
There's no particular reason to allow the user to edit the clone URI field in Diffusion; editing it has no meaning and if you fat finger the keyboard, it's quite possible that the user will either accidentally clear and/or modify the URI before copying (bit me this morning).
Adding a readonly attribute to the input field allows the same benefit (URI is easily selectable) while preventing such accidental input. Fixes T4246.
Test Plan: Verified that the desired behavior is present in both Chrome, Safari, and Firefox. Field remains selectable with one click, but field is not editable.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4246
Differential Revision: https://secure.phabricator.com/D7810
Summary: Ref T4195. Adds "Author" and "Committer" fields.
Test Plan:
Created a rule using these fields:
{F90897}
...then pushed git, mercurial and svn commits and verified the correct values populated in the transcript:
{F90898}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7802
Summary:
Ref T4195. To implement the "Author" and "Committer" rules, I need to resolve author/committer strings into Phabricator users.
The code to do this is currently buried in the daemons. Extract it into a standalone query.
I also added `bin/repository lookup-users <commit>` to test this query, both to improve confidence I'm getting this right and to provide a diagnostic command for users, since there's occasionally some confusion over how author/committer strings resolve into valid users.
Test Plan:
I tested this using `bin/repository lookup-users` and `reparse.php --message` on Git, Mercurial and SVN commits. Here's the `lookup-users` output:
>>> orbital ~/devtools/phabricator $ ./bin/repository lookup-users rINIS3
Examining commit rINIS3...
Raw author string: epriestley
Phabricator user: epriestley (Evan Priestley )
Raw committer string: null
>>> orbital ~/devtools/phabricator $ ./bin/repository lookup-users rPOEMS165b6c54f487c8
Examining commit rPOEMS165b6c54f487...
Raw author string: epriestley <git@epriestley.com>
Phabricator user: epriestley (Evan Priestley )
Raw committer string: epriestley <git@epriestley.com>
Phabricator user: epriestley (Evan Priestley )
>>> orbital ~/devtools/phabricator $ ./bin/repository lookup-users rINIH6d24c1aee7741e
Examining commit rINIH6d24c1aee774...
Raw author string: epriestley <hg@yghe.net>
Phabricator user: epriestley (Evan Priestley )
Raw committer string: null
>>> orbital ~/devtools/phabricator $
The `reparse.php` output was similar, and all VCSes resolved authors correctly.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1731, T4195
Differential Revision: https://secure.phabricator.com/D7801
Summary: Ref T4195. Even though we use `svnlook` in the hook itself, I need this query elsewhere, so provide it and merge the classes into one which does the right thing.
Test Plan:
- Used `reparse.php` to reparse messages for Git, SVN and Mercurial commits, using `var_dump()` to examine the commit refs for sanity.
- Used `reparse.php` to reparse changes for an SVN commit.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7800
Summary: Ref T4249. Currently, a global rule can only trigger project audits. Although there probably aren't a huge number of use cases for triggering users from global rules, it works fine and it's somewhat confusing not to allow it.
Test Plan: {F90902}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4249
Differential Revision: https://secure.phabricator.com/D7803
Summary: There were a number of places that were generating nonsense queries for both hosted and non-hosted subversion repositories.
Test Plan: Attempted several activities in Diffusion with both a hosted and non-hosted subversion repository, including viewing various types of diffs and raw files.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7799
Summary: If you push a large binary and the data crosses multiple data frames, we can end up in a loop in the parser.
Test Plan:
After this change, I was able to push a 95MB binary in 7s, which seems reasonable:
>>> orbital ~/repos/INIS $ svn st
A large2.bin
>>> orbital ~/repos/INIS $ ls -alh
total 390648
drwxr-xr-x 6 epriestley admin 204B Dec 18 17:14 .
drwxr-xr-x 98 epriestley admin 3.3K Dec 16 11:19 ..
drwxr-xr-x 7 epriestley admin 238B Dec 18 17:14 .svn
-rw-r--r-- 1 epriestley admin 80B Dec 18 15:07 README
-rw-r--r-- 1 epriestley admin 95M Dec 18 16:53 large.bin
-rw-r--r-- 1 epriestley admin 95M Dec 18 17:14 large2.bin
>>> orbital ~/repos/INIS $ time svn commit -m 'another large binary'
Adding (bin) large2.bin
Transmitting file data .
Committed revision 25.
real 0m7.215s
user 0m5.327s
sys 0m0.407s
>>> orbital ~/repos/INIS $
There may be room to improve this by using `PhutilRope`.
Reviewers: wrotte, btrahan, wotte
Reviewed By: wotte
CC: aran
Differential Revision: https://secure.phabricator.com/D7798
Summary: Ref T4195. Same as D7793, but for mercurial. (As usual, SVN needs some goofy nonsense instead, so the next diff will just make this field work.)
Test Plan: Ran `reparse.php` on Git and Mercurial commits, var_dump'd the output and it looked correct.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7795
Summary: Ref T4195. I need to issue this command from the pre-commit hook to get commit bodies for hooks.
Test Plan: Ran `reparse.php --message --trace` and dumped the $ref, which looked correct.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7793
Summary: We currently have a lot of calls to `addCrumb(id(new PhabricatorCrumbView())->...)` which can be expressed much more simply with a convenience method. Nearly all crumbs are only textual.
Test Plan:
- This was mostly automated, then I cleaned up a few unusual sites manually.
- Bunch of grep / randomly clicking around.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: hach-que, aran
Differential Revision: https://secure.phabricator.com/D7787
Summary: Ref T4195. Add Mercurial support to the content hook phase.
Test Plan:
Here are some `commit` push logs for a Mercurial repo:
{F90689}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7792
Summary: Ref T4195. Adds support for diff content rules.
Test Plan: Pushed SVN and Git changes through, saw them generate reasonable transcripts. Mercurial still isn't hooked up to this phase.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7791
Summary: Ref T4195. This doesn't provide any interesting fields yet (content, affected paths, commit message) but fires the hook correctly.
Test Plan: Added a blocking hook and saw it fire.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7789
Summary: Allow Herald rules to be referred to with `H123`, etc., like other object types are. Herald rules now have proper PHIDs and an increasingly prominent role in triggering application actions. Although I suspect users will rarely use `H123` in Remarkup to mention rules, this can simplify some of the interfaces which relate objects across systems.
Test Plan: Looked at various interfaces and saw `H123` names. Mentioned `H123` in remarkup.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7786
Summary:
These just got copy/pasted like crazy, the base class has the correct default implementation.
(I'm adding "H" for Herald Rules, which is why I was in this code.)
I also documented the existing prefixes at [[ Object Name Prefixes ]].
Test Plan: Verified base implementation. Typed some object names into the jump nav.
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Differential Revision: https://secure.phabricator.com/D7785
Summary:
A few users have hit cases where Herald transcripts of large commits exceed the MySQL packet limit, because one of the fields in the transcript is an enomrous textual diff.
There's no value in saving these huge amounts of data. Transcripts are useful for understanding the action of Herald rules, but can be reconstructed later. Instead of saving all of the data, limit each field to 4KB of data.
For strings, we just truncate at 4KB. For arrays, we truncate after 4KB of values.
Test Plan: Ran unit tests. Artificially decreased limit and ran transcripts, saw them truncate properly.
Reviewers: btrahan
Reviewed By: btrahan
CC: frgtn, aran
Differential Revision: https://secure.phabricator.com/D7783
Summary:
Ref T615. Ref T4237. With `--debug`, Mercurial will echo an "ignoring untrusted configuration option" warning **to stdout** if `.hgrc` has the wrong owner.
However, we need `--debug` to make `{parents}` usable, at least until the patches I got into the upstream are widely deployed. So after getting `--debug` output, strip off any leading warnings.
These warnings should always be in English, at least, since we set `LANG` explicitly.
Test Plan: Unit tests. @asherkin, maybe you can confirm this? I can't actually get the warning, but I think my `hg` in PATH is just a bit out of date.
Reviewers: asherkin, btrahan
Reviewed By: asherkin
CC: asherkin, aran
Maniphest Tasks: T615, T4237
Differential Revision: https://secure.phabricator.com/D7784
Summary: Ref T4195. Herald rules gained PHIDs only recently, propagate them to HeraldEffect to make some of the hook stuff eaiser.
Test Plan: iiam
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7781
Summary: Ref T4195. We need these in Herald, since HeraldTranscripts need to refer to a PHID which they acted upon.
Test Plan:
Ran migration, got PHIDs:
mysql> select phid from repository_pushlog limit 3;
+--------------------------------+
| phid |
+--------------------------------+
| PHID-PSHL-25jnc6cjgzw5rwqgmr7r |
| PHID-PSHL-2vrvmtslkrj5yv7nxsv2 |
| PHID-PSHL-34x262zkrwoka6mplony |
+--------------------------------+
3 rows in set (0.00 sec)
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7780
Summary: Ref T4195. SVN has no such thing as refs (I was thinking about writing a quasi-ref anyway like `HEAD: r23 -> r24`, but I'm not sure it would actually be useful). And content is very easy to build.
Test Plan: Pushed some stuff to SVN, got logs from it.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7766
Summary: Ref T4195. This doesn't actually work like I thought it did: it only fires locally, when you run `hg tag`. Mercurial tags are also weird and basically don't make any sense and everyone should use bookmarks instead. We could implement some flavor of this eventually, but I'd like to see users request it first. They can implement their own with content-based hooks once those work, anyway.
Test Plan: This code didn't do anything.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7765
Summary:
Ref T4195. This pulls the central logic of HookEngine up one level and makes all the git stuff genrate PushLogs.
In future diffs, everything will generate PushLogs and we can hand those off to Herald.
Test Plan:
Pushed a pile of valid/invalid stuff:
{F89256}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7761
Summary: Until we implement an "enum" type for config, make this a bit harder to get wrong. A user entered "TLS", but the correct value is "tls". The documentation is consistent about this, but the behavior is sitll surprsing.
Test Plan: eyeballed it
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7778
Summary:
Fixes T4239. Currently, if you go to `/maniphest/?authors=alincoln`, operations dependent on the query key (like "Save Custom Query..." and "Export to Excel...") don't have a query key to work with. Make sure they have one.
Also remove a stray `phlog()`.
Test Plan: "Save Custom Query...", etc., now work on GET queries.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4239
Differential Revision: https://secure.phabricator.com/D7777
Summary: Not every revision belongs to a repository, so we might end up here with `$repo` still equal to `null`. Don't fatal if we do.
Test Plan: iiam
Reviewers: btrahan, hach-que, zeeg
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7771
Summary: Patches can exceed the 30 second time out in most PHP installations. This removes the patch preview from the version controller so that users can still see the information (although they may not be able to download the actual patch).
Test Plan: Viewed a version and saw that the patch didn't appear.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7767
Summary: This implements support for enforcing and setting policies in Phragment.
Test Plan: Set policies and ensured they were enforced successfully.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4205
Differential Revision: https://secure.phabricator.com/D7751
Summary:
Ref T4107. Two issues:
- With strict MySQL settings, we try to insert `null` into the non-nullable `messageCount` field. Add an `initializeNew...` method.
- If we don't create a new conpherence (for example, because the message body is empty), we fatal on `getPHID()` right now.
Also, make this stuff a little easier to test.
Test Plan: Used `mail_handler.php` to receive empty conpherence mail, and new-thread conpherence mail.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4107
Differential Revision: https://secure.phabricator.com/D7760
Summary:
See <https://github.com/facebook/phabricator/issues/467>. @dctrwatson also ran into an issue where we were trying to `setPass()` a GitURI.
- For Git and Mercurial, properly generate credential URIs where relevant.
- Don't try to `setPass()` on Git-style URIs.
This isn't perfect but should clean things up a bit.
Test Plan: Added unit tests. Lots of `grep`.
Reviewers: btrahan
Reviewed By: btrahan
CC: dctrwatson, aran
Differential Revision: https://secure.phabricator.com/D7759
Summary: This is a small fix for Phortune so that policies don't prevent the user accounts from being implicitly created when they first visit Phortune.
Test Plan: Visited Phortune and it worked.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7758
Summary: Fixes T4224. If you `git merge-base A B`, and they have //no// ancestor, the command exits with an error. Assume errors mean "no ancestry" and continue.
Test Plan: Completely rewrite a repository with a `--force` push.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4224
Differential Revision: https://secure.phabricator.com/D7756
Summary: Fixes T4225. Adds the NON_EXISTS condition to Herald for "Reviewers", and adds a few more conditions which have reasonable meanings.
Test Plan: Used test console to check a revision with reviewers, and another without reviewers. Both produced the expected results.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4225
Differential Revision: https://secure.phabricator.com/D7757
Summary: We run `git` on a different port than 22, so would like to reflect this change in the UI.
Test Plan: Set diffusion.ssh-port in settings, then make sure it's reflected on the Diffusion repository Clone URI.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran, dctrwatson
Differential Revision: https://secure.phabricator.com/D7755
Summary: Fixes T4223. The output of `ls-tree` is partially delimited by spaces
and partially delimited by `\t`. The code I added in D7744 to help debug the
issue in T4159 doesn't work properly for files with 7 or more bytes in their
filesize, because the internals use `%7s`.
Auditors: btrahan
Summary:
This provides a `phragment.getstate` and a `phragment.getpatch` Conduit method.
`phragment.getstate` - This returns the current state of the fragment and all of it's children.
`phragment.getpatch` - This accepts a base path and a mapping of paths to hashes. The mapping is for the caller to specify the current state of the files it has. This returns a list of patches that the caller needs to apply to it's files to get to the latest version.
Test Plan:
Ran the following script in a folder which had content matching a fragment and it's children:
```
#!/bin/bash
STATE=""
for i in $(find ./ -type f); do
HASH=$(cat $i | sha1sum | awk '{ print $1 }')
BASE=${i:2}
STATE="$STATE,\"$BASE\":\"$HASH\""
done
STATE=${STATE:1}
STATE="{$STATE}"
echo '{"path":"tychaia3.zip","state":'$STATE'}' | arc --conduit-uri=http://phabricator.local/ call-conduit phragment.getpatch
```
and I got:
```
{"error":null,"errorMessage":null,"response":[]}
```
I updated one of the child fragments with a new file and ran the script again (patch has been omitted due to it's size):
```
{"error":null,"errorMessage":null,"response":[{"path":"Content\/TitleFont.xnb","hash_old":"4a927d7b90582e50cdd330de9f4b59b0cc5eb5c7","hash_new":"25867504642a3a403102274c68fbb9b430c1980f","patch":"..."}]}
```
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran, staticshock
Maniphest Tasks: T4205
Differential Revision: https://secure.phabricator.com/D7739
Summary: This adds a build step which will block a build from continuing if there are previous builds of the build plan still running.
Test Plan: Configured a build plan with a wait of 60 seconds and a "wait for previous builds", then started a build. While that was still building, reconfigured the plan to have a wait time of 3 seconds, started it, and saw it move into the "Waiting" status. When the 60 second build finished, both builds passed.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7745
Summary:
This came up recently in a discussion with @lifeihuang, and then tangentally with @hach-que. Make it easier for users to get a sense of whether they might need to add more daemons. Although we've improved the transparency of daemons, it's not easy for non-experts to determine at a glance how close to overflowing the queue is.
This number is approximate, but should be good enough for determining if your queue is more like 25% or 95% full.
If this goes over, say, 80%, it's probably a good idea to think about adding a couple of daemons. If it's under that, you should generally be fine.
Test Plan: {F88331}
Reviewers: btrahan, hach-que, lifeihuang
Reviewed By: btrahan
CC: hach-que, lifeihuang, aran, chad
Differential Revision: https://secure.phabricator.com/D7747
Summary: Most checks were actually in place, but `ExecFuture` throws a `CommandException` which wasn't taken into account.
Test Plan: look at the first command and no longer saw an exception. Also, other commits worked as well.
Reviewers: richardvanvelzen
Reviewed By: richardvanvelzen
CC: krisbuist, Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7730
Summary: This adds a build step in Harbormaster for publishing file artifacts as fragments in Phragment.
Test Plan:
Created a build plan with the following steps:
* Lease Host
* Upload Artifact
* Publish Fragment
Ran the build plan against a buildable and saw the fragment get created in Phragment. Ran the plan again and saw the fragment get updated with a new version. Modified the file that got uploaded and ran the plan again, checked the history of the fragment, and saw the differences represented as a Diff-Match-Patch patch.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4205
Differential Revision: https://secure.phabricator.com/D7742
Summary:
Ref T4212. This implements snapshots in Phragment, which allows you to take a snapshot of a fragment at a given point in time, and download a ZIP of the snapshot as it was in this state.
There's also functionality for deleting and promoting snapshots. You can promote a snapshot to either the latest version or any other snapshot of the fragment.
Test Plan: Clicked around, took some snapshots, promoted them to different points and deleted snapshots. Also downloaded ZIPs of the snapshots and saw the right versions coming through for all the files downloaded.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4205, T4212
Differential Revision: https://secure.phabricator.com/D7741
Summary:
This functionality allows users to revert a fragment to a previous version from the history page.
Reverting a version actually creates a new version pointing at the same file as the version being "reverted" to. In this sense it acts pretty much like Git and other distributed VCS where once you have published a commit the only way to undo your changes is to create a new commit that reverts those changes.
Test Plan: Reverted a fragment to a version before it was deleted, then reverted it to when it was deleted and saw the new versions have the correct file PHIDs (including null for the deletion).
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4205
Differential Revision: https://secure.phabricator.com/D7738
Summary: This updates Phragment so that fragments that are currently considered deleted have a disabled status and have an additional attribute 'Deleted'. It also places this effect on versions (in the history controller) that actually involve deleting the file.
Test Plan: Viewed deleted fragments and versions.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4205
Differential Revision: https://secure.phabricator.com/D7737
Summary: When the code to update based on ZIP went to look up the child fragments, it explicitly used the paths provided in the ZIP. This meant that we could never detect omissions because there'd never be a scenario where a child fragment would return but not exist in the ZIP. To fix this, the query should be using `withLeadingPath` instead of `withPaths`.
Test Plan: Uploaded a ZIP that omitted a file and saw the `deleteFile` get called (by placing debugging output in the code).
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4205
Differential Revision: https://secure.phabricator.com/D7736
Summary: This logic causes an exception because getPHID() is called on a fragment that has no latest version. This fixes the code so that in this scenario, it returns an empty array (with no path to be added to the ZIP).
Test Plan: Downloaded the ZIP successfully after the patch was applied.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4205
Differential Revision: https://secure.phabricator.com/D7735
Summary:
This adds support for viewing individual versions on a fragment as well as comparing versions and downloading diff_match_patch-based patches.
It does not use the side-by-side diff format as while it works for small changes, it quickly becomes impossible to distingush what changes have been made due to the diff_match_patch format.
Test Plan: Clicked on versions and downloaded patches.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4205
Differential Revision: https://secure.phabricator.com/D7734
Summary: This fixes the update-from-ZIP functionality so that it will automatically detect directories in the ZIP that do not have explicit entries. Some ZIP programs do not create directory entries explicitly, so if we fail to do this then there's no way for users to access the sub-fragments (even though they exist, there is no directory fragment to click through).
Test Plan: Created and updated fragments from a ZIP that had implicit directories in it.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran, staticshock
Maniphest Tasks: T4205
Differential Revision: https://secure.phabricator.com/D7733
Summary:
This implements support for creating and updating fragments from ZIP files. It allows you to upload a ZIP via the Files application, create a fragment from it, and have it recursively imported into Phragment. Updating that folder with another ZIP will recursively create, update and delete files as appropriate.
The logic for creating and updating fragments from files has also been centralized into the PhragmentFragment class. Directories are also now supported; a directory fragment is simply a fragment that has no patches; thus a directory fragment can be converted to a file fragment by uploading a first patch for it.
Test Plan: Uploaded ZIP files through the interface and saw all of the fragments get created and updated as expected.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4205
Differential Revision: https://secure.phabricator.com/D7729
Summary: Depends on D7727. This adds support for downloading a fragment and all it's children as a ZIP file. Fragments that have children automatically become directories in the ZIP file.
Test Plan: Downloaded a fragment as a ZIP and was able to extract the contents successfully.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4205
Differential Revision: https://secure.phabricator.com/D7728
Summary: Depends on D7726. This adds a history controller (for viewing a list of patches associated with a fragment) and an update controller, for creating a new patch of a fragment.
Test Plan: Updated and viewed history of fragments.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4205
Differential Revision: https://secure.phabricator.com/D7727
Summary: Ref T4205. This is an initial implementation of Phragment. You can create and browse fragments in the system (but you can't yet view a fragment's patches / history).
Test Plan: Clicked around and created fragments.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4205
Differential Revision: https://secure.phabricator.com/D7726
Summary:
A user sent a message to Phabricator which looked like:
On blah blah blah ?
On <date>, <user> wrote:
> blah blah blah
The current algorithm is too aggressive and thinks lines 1-3 are //all// the "On ... wrote:" string. Instead, patch only the most recent "On".
Test Plan: Added a failing test and made it pass.
Reviewers: btrahan, zeeg
Reviewed By: zeeg
CC: aran
Differential Revision: https://secure.phabricator.com/D7732
Summary: This implements support for explicitly marking the sequence of build steps. Users can now drag and re-order build steps in plans, and artifact dependencies are re-calculated so that if you move "Run Command" before "Lease Host", the "Run Command" step has it's artifact setting cleared and thus the step becomes invalid.
Test Plan: Re-ordered build steps and observed dependencies being correctly recalculated.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7715
Summary: This implements a build step for uploading an artifact from a build machine to Phabricator. It uses SFTP so that it will work on both UNIX and Windows build machines.
Test Plan: Ran an "Upload Artifact" build against a Windows machine (with FreeSSHD installed). The artifact uploaded to Phabricator, appeared on the build view and the file contents could be viewed from Phabricator.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7582
Summary: This locks push logs down a little bit and makes them slightly more administrative. Primarily, don't show IPs to googlebot, etc.
Test Plan: Viewed push logs as edit and non-edit users.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7722
Summary:
`PhabricatorPolicyFilter` has a bug right now where it lets through objects incorrectly if:
- the query requests two or more policies;
- the object satisfies at least one of those policies; and
- policy exceptions are not enabled.
This would be bad, but there's only one call in the codebase which satisfies all of these conditions, in the Maniphest batch editor. And it's moot anyway because edit operations get another policy check slightly later. So there is no policy/security impact from this flaw.
(The next diff relies on this behavior, which is how I caught it.)
Test Plan:
- Added a failing unit test and made it pass.
- Grepped the codebase for `requireCapabilities()` and verified that there is no security impact. Basically, 99% of callsites use `executeOne()`, which throws anyway and moots the filtering.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7721
Summary:
Ref T4195. Like the previous diffs, these both create a useful log and give us an object to hand off to Herald.
Surface this information in Diffusion, too, and clean things up a little bit.
Test Plan: {F87565}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7718
Summary: Ref T4195. Add UI options to filter push logs by pusher and repository. Add a link from the repository view page to the push logs.
Test Plan: Viewed a hosted repository, clicked logs link, saw logs. Filtered lgos by repo/pusher.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7713
Summary: Ref T4195. Stores remote address and protocol in the logs, where possible.
Test Plan: Pushed some stuff, looked at the log, saw data.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7711
Summary:
Ref T4195. This log serves two purposes:
- It's a log, so you can see what happened. Particularly, in Git/Hg, there is no other way to tell:
- Who //pushed// a change (vs committed / authored)?
- When was a change pushed?
- What was the old value of some tag/branch before someone destroyed it?
- We can hand these objects off to Herald to implement pre-commit rules.
This is a very basic implementation, but gets some data written and has a basic UI for it.
Test Plan: {F87339}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7705
Summary:
Report from Asana. In some unclear circumstances, we my attempt to resolve duplicate refs which currently ends up hitting a duplicate key error.
Instead, reference the same external object if we happen to be handed duplicate refs.
Test Plan:
Used this script to reproduce the issue. Applied the fix; issue went away:
#!/usr/bin/env php
<?php
require_once 'scripts/__init_script__.php';
$args = new PhutilArgumentParser($argv);
$args->parseStandardArguments();
$ref = id(new DoorkeeperObjectRef())
->setApplicationType(DoorkeeperBridgeAsana::APPTYPE_ASANA)
->setApplicationDomain(DoorkeeperBridgeAsana::APPDOMAIN_ASANA)
->setObjectType(DoorkeeperBridgeAsana::OBJTYPE_TASK)
->setObjectID(7253737283629); // Use a new task ID which we've never pulled.
$refs = array(clone $ref, clone $ref);
$asana_user = id(new PhabricatorPeopleQuery())
->setViewer(PhabricatorUser::getOmnipotentUser())
->withUsernames(array('asana'))
->executeOne();
$resolved_refs = id(new DoorkeeperImportEngine())
->setViewer($asana_user)
->setRefs($refs)
->execute();
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7709
Summary: We were getting a weird double box here, missed it my first pass
Test Plan: Review logged in Maniphest and Paste, as well as logged out versions. Test Login flow.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7716
Summary: This cleans up the UI of closed tasks in Maniphest task view, removes the Foot and sets view to disabled.
Test Plan: Searched for all tasks
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7712
Summary: These arguments prevent stderr from being routed correctly for Linux hosts and break Windows entirely. Removing them fixes the issue.
Test Plan: Removed those options and both Linux and Windows hosts had their output fed back into Harbormaster correctly.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4111, T1029
Differential Revision: https://secure.phabricator.com/D7710
Summary: Currently the "Edit Build Plan" page crashes if there are any build steps with invalid implementations (because the implementation class has been removed or renamed). This updates the Edit Build Plan page so that steps with invalid implementations can be deleted.
Test Plan: Looked at a build plan with invalid configurations and deleted it's steps.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4111, T1049
Differential Revision: https://secure.phabricator.com/D7708
Summary: This migrates the "Run Remote Command" build step over to use Drydock hosts and Harbormaster artifacts.
Test Plan:
Created a build plan with a "Lease Host" step and a "Run Command" step. Configured the "Run Command" step to use the artifact from the "Lease Host" step.
Saw the results:
{F87377}
{F87378}
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T1049, T4111
Differential Revision: https://secure.phabricator.com/D7707
Summary:
This adds LeaseHostBuildStepImplementation for getting leases on hosts in Drydock via Harbormaster. It stores the resulting lease in an artifact.
There is also a few bug fixes as well.
Test Plan: Created a build plan with a "Lease Host" build step. Ran the build plan and saw the build pass and the artifact in the database.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T1049, T4111
Differential Revision: https://secure.phabricator.com/D7706
Summary: This implements build targets as outlined in D7582. Build targets represent an instance of a build step particular to the build. Logs and artifacts have been adjusted to attach to build targets instead of build / build step pairs.
Test Plan: Ran builds and clicked around the interface. Everything seemed to work.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4111, T1049
Differential Revision: https://secure.phabricator.com/D7703
Summary: Ref T4151. These are a (common) variant of "ssh-dsa" keys (which are somewhat theoretical, but show up on Google).
Test Plan: syntax
Reviewers: btrahan, dctrwatson, phpcodemonkey
Reviewed By: phpcodemonkey
CC: aran
Maniphest Tasks: T4151
Differential Revision: https://secure.phabricator.com/D7704
Summary:
Ref T1715. When the user clicks "Download Raw Diff" in Differential, we try to build a diff of exactly what they're seeing. However:
- This doesn't work if any of the changes have multiple hunks, and fixing it seems hard.
- I suspect this diff is never actually useful anyway? And probably kind of confusing in the best case. You can't really apply it to anyhting, since you'd have to apply another diff first.
Instead, just build the right-side diff, which should align well with user expectation and doesn't suffer from the multi-hunk bug.
Some day, we could maybe add some of the fancy options in T1715.
See: <https://github.com/facebook/phabricator/issues/461>
Test Plan: Downloaded a multi-hunk diff, got the original back and applied it cleanly.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1715
Differential Revision: https://secure.phabricator.com/D7694
Summary: This updates DrydockSSHCommandInterface to correctly hold open the private key credentials for the life of the interface so that remote commands will execute correctly with a text-based private key.
Test Plan: Created a text-based private key, created a resource based on it and leased against it.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4111
Differential Revision: https://secure.phabricator.com/D7700
Summary: Depends on D7695. This updates preallocated hosts to use Passphrase credentials. Due to the way SSH private key text credentials work (the TempFile disappears before SSH commands can be executed), this only supports file-based private keys at the moment.
Test Plan:
Created a Passphrase credential for a file-based SSH key. Allocated a resource with:
```
bin/drydock create-resource --blueprint 1 --name "My Linux Host" --attributes platform=linux,host=localhost,port=22,path=/var/drydock,credential=2
```
and successfully leased it.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4111, T1049
Differential Revision: https://secure.phabricator.com/D7697
Summary: This prevents issues when the user hasn't provided the appropriate attributes for a preallocated host.
Test Plan: Attempted to lease against a resource with omitted attributes, got an exception thrown before any SSH commands occurred.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7695
Summary: Fixes T4198. We don't currently show "(Maniphest) > T123 > Edit" on the edit screen, which is inconsistent. Add the "T123" crumb.
Test Plan: {F87177}
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T4198
Differential Revision: https://secure.phabricator.com/D7699
Summary: The link pointed to `create/`, which gives as `404`.
Test Plan: clicked the link. It worked.
Reviewers: epriestley, #blessed_reviewers, chad
Reviewed By: chad
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7698
Summary: Touch up /notifications/ for desktop and mobile
Test Plan: Tested read and unread notifications on mobile and desktop
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7671
Summary:
Ref T4189. This doesn't add any rules yet, but does all the heavy lifting to figure out what's changed and put it in a consuamble (if somewhat ad-hoc) datastructure, which lists all the ref and tag modifications and all the new commits in a consistent way.
From here, it should be fairly straightforward to add top-level rules (e.g., ff pushes only).
Test Plan: Output is huge, see comments.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4189
Differential Revision: https://secure.phabricator.com/D7687
Summary: This adds the ability to float action buttons inside ObjectHeaderView.
Test Plan: Tested a UI Example on desktop and mobile. Will test on Notifications next.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7684
Summary: There's no guarantee that the local path has a trailing "/". We
should probably guarantee that at some point, but just add one
unconditionally for now.
Auditors: btrahan
Summary:
//(this diff used to be about applying policies to blueprints)//
This restructures Drydock so that blueprints are instances in the DB, with an associated implementation class. Thus resources now have a `blueprintPHID` instead of `blueprintClass` and DrydockBlueprint becomes a DAO. The old DrydockBlueprint is renamed to DrydockBlueprintImplementation, and the DrydockBlueprint DAO has a `blueprintClass` column on it.
This now just implements CAN_VIEW and CAN_EDIT policies for blueprints, although they are probably not enforced in all of the places they could be.
Test Plan: Used the `create-resource` and `lease` commands. Closed resources and leases in the UI. Clicked around the new and old lists to make sure everything is still working.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4111, T2015
Differential Revision: https://secure.phabricator.com/D7638
Summary: Ref T4189. Fixes T2066. Mercurial has a //lot// of hooks so I'm not 100% sure this is all we need to install (we may need separate hooks for tags/bookmarks) but it should cover most of what we're after at least.
Test Plan:
- `bin/repository pull`'d a Mercurial repo and got a hook install.
- Pushed to a Mercurial repository over SSH and HTTP, with good/bad hooks. Saw hooks fire.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2066, T4189
Differential Revision: https://secure.phabricator.com/D7685
Summary:
Ref T4189. This adds SVN support, which was a little more messy than I though. Principally, we can not use `PHABRICATOR_USER` for Subversion, because it strips away the entire environment for "security reasons".
Instead, use `--tunnel-user` plus `svnlook author` to figure out the author.
Also fix "ssh://" clone URIs, which needs to be "svn+ssh://".
Test Plan:
- Made SVN commits through the hook.
- Made Git commits, too, to make sure I didn't break anything.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4189
Differential Revision: https://secure.phabricator.com/D7683
Summary:
Ref T4189. T4189 describes most of the intent here:
- When updating hosted repositories, sync a pre-commit hook into them instead of doing a `git fetch`.
- The hook calls into Phabricator. The acting Phabricator user is sent via PHABRICATOR_USER in the environment. The active repository is sent via CLI.
- The hook doesn't do anything useful yet; it just veifies basic parameters, does a little parsing, and exits 0 to allow the commit.
Test Plan:
- Performed Git pushes and pulls over SSH and HTTP.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4189
Differential Revision: https://secure.phabricator.com/D7682
Summary: DrydockResource has been updated to be policy-aware (although there are no policy columns).
Test Plan: Clicked around in Drydock, viewed resources and leases, everything still seemed to work.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T3605, T4111
Differential Revision: https://secure.phabricator.com/D7595
Summary: If there is no /query in the URL, the default query would be lost when clicking Next, causing the search form to be shown on the second page. This is not so likely to happen on a standard Phabricator installation because the default query is Assigned, and few people will have 100+ tasks assigned.
Test Plan:
* Go to /maniphest/query/edit/
* Move Open Tasks to the top
* Go to /maniphest/
* Click Next on the bottom right
* See only tasks that are actually open
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7667
Test Plan: Go to a project page, make browser window narrow, click to expand action list.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7666
Summary: `LANG=C` is smooshing UTF-8 in some cases. See IRC.
Test Plan: User confirmed this works.
Reviewers: btrahan, asherkin
Reviewed By: asherkin
CC: aran
Differential Revision: https://secure.phabricator.com/D7659
Summary:
By default in search application document status field is "Open and Closed Documents".
Often searching with this default status I get confused that open and closed items in
search result are not distinguished.
Test Plan: Search and see open/closed issues distinguished.
Reviewers: chad, #blessed_reviewers, epriestley
Reviewed By: epriestley
CC: epriestley, aran, Korvin
Differential Revision: https://secure.phabricator.com/D7626
Summary: Request from Asana. Adds an option for adding tasks to projects.
Test Plan: Used `bin/feed republish` to create and update Asana tasks with projects configured. Saw them end up in the right projects.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7655
Summary: See D7653. This is exclusively for Asana, who uses Differential for a post-commit, Audit-like workflow but has a small set of requirements for it to be a good fit (just this) and a large set of requirements for Diffusion/Audit to be a good fit.
Test Plan: Set the flag, verified "Accepted" revisions are no longer on the dashboard.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7654
Summary:
Currently, "Closed" and "Abandoned" are treated as "closed". I want to add a flag which treats "Accepted" as "Closed", too, for Asana and other companies who use an Asana-like workflow.
The background here is that their workflow is a bit weird. They basically do audits, but have a lot of things which Diffusion doesn't do well right now. This one change makes Differential fit their workflow fairly well, even though it's an audit workflow.
To prepare for this, normalize the definition of "closed" better. We have a few callsites which explicitly check for "ABANDONED || CLOSED", and normalizing this is cleaner anyway.
Also delete the very old COMMITTED status, which has been obsolete for over a year.
Test Plan: Browsed around most/all of the affected interfaces.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7653
Summary: Fixes T4148. LDAPS works with "ldaps://", it just isn't documented or clear.
Test Plan: {F84893}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4148
Differential Revision: https://secure.phabricator.com/D7652
Summary:
Fixes T4158. Two possible refinements:
- Maybe we should make all of these things respect `ManiphestCapabilityEditAssign::CAPABILITY`, etc. I think it's reasonable either way, and this is probably more intuitive and useful for most cases.
- Maybe we should check that you can see the policies before copying them. Again, this is sort of reasonable either way.
Test Plan: Created a new task from a template, saw that it inherited policies.
Reviewers: btrahan, hach-que
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T4158
Differential Revision: https://secure.phabricator.com/D7649
Summary: Fixes T3687. Instead of rendering "JIRA Issues" in Differential using plain links, render them using Doorkeeper tags so they get the nice "enhance with object name" effect.
Test Plan: {F84886}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3687
Differential Revision: https://secure.phabricator.com/D7648
Summary: Touched up the layout, css of this page
Test Plan: Viewed linked and linkable accounts. Tested mobile layout
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7644
Summary: Fixes T4155. See discussion in T4155.
Test Plan: @mbishopim3 confirmed this fixes his issue.
Reviewers: btrahan, chad
Reviewed By: chad
CC: mbishopim3, aran
Maniphest Tasks: T4155
Differential Revision: https://secure.phabricator.com/D7646
Summary: This was broken in rP51fb1ca16d7f.
Test Plan: Imported a repository with file:/// location, it worked.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7636
Summary: Fixes T2230. This isn't a total walk in the park to configure, but should work for early adopters now.
Test Plan: Read documentation, browsed UI.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7634
Summary:
Ref T4038. This adds everything except the actual pushing part for mirrors.
This isn't the most beautiful or sophisticated UI, but I want get the authoritative repositories self-hosted and get users beta-ing hosting as soon as possible. We can do transactions, etc., later on.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4038
Differential Revision: https://secure.phabricator.com/D7632
Summary: Fixes T4122. Ref T2230. Instead of storing credentials on each repository, store them in Passphrase. This allows easy creation/management of many repositories which share credentials.
Test Plan:
- Upgraded repositories.
- Created and edited repositories.
- Pulled HTTP and SSH repositories.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230, T4122
Differential Revision: https://secure.phabricator.com/D7629
Summary: Ref T4122. Add an edge to keep track of where a credential is used, and show it in the UI.
Test Plan:
See "Used By":
{F84099}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4122
Differential Revision: https://secure.phabricator.com/D7628
Summary: Ref T4122. These classes provide typed, checked access to credentials, so you can say "give me this password, and throw if anything is funky".
Test Plan: Used in next revision.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4122
Differential Revision: https://secure.phabricator.com/D7625
Summary:
Ref T4122.
- For Diffusion, we need "allow null" (permits selection of "No Credential") for anonymous HTTP repositories.
- For Diffusion, we can make things a little easier to configure by prefilling the username.
Test Plan: Used UIExample form. These featuers are used in a future revision.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4122
Differential Revision: https://secure.phabricator.com/D7624
Summary:
This adds a Drydock blueprint for preallocated, remote hosts. This will be used by the Harbormaster interface to allow users to specify remote hosts that builds can be run on.
This adds a `canAllocateResource` method to Drydock blueprints; it is used to detect whether a blueprint can allocate a resource for the given type and attributes.
Test Plan:
Ran:
```
bin/drydock lease --type host --attributes remote=true,preallocated=true,host=192.168.56.101,port=22,user=james,keyfile=,path=C:\\Build\\,platform=windows
```
and saw the "C:\Build\<id>" folder appear on the remote Windows machine. Viewed the lease and resource in Drydock as well.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran, jamesr
Maniphest Tasks: T4111
Differential Revision: https://secure.phabricator.com/D7593
Summary: Show SSH user on git-over-ssh repositories and hide both username and password for other repos.
Test Plan: View repository details page in diffusion, Clone URI should appear with a username (taken from repo config) and any http(s) repos should be without usernames.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4147
Differential Revision: https://secure.phabricator.com/D7631
Summary: Simplifies the code a bit and fixes all the wonky previews. Fixes T4053
Test Plan: Test all pages, logged in and logged out.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4053
Differential Revision: https://secure.phabricator.com/D7622
Summary: D7590 made path construction more consistent, but affected this callsite if a subpath is configured. Currently, we end up with double `@@` in the URI.
Test Plan:
- Ran unit tests.
- Ran `bin/repostitory discover`.
Reviewers: staticshock, btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7619
Summary:
Ref T4140. We could hit a redirect loop for a user with a verified primary email address but no "is verified" flag on their account. This shouldn't be possible since the migration should have set the flag, but we can deal with it more gracefully when it does happen (maybe because users forgot to run `storage/upgrade`, or because of ghosts).
In the controller, check the same flag we check before forcing the user to the controller.
When verifying, allow the verification if either the email or user flag isn't set.
Test Plan: Hit `/login/mustverify/`; verified an address.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4140
Differential Revision: https://secure.phabricator.com/D7621
Summary: Ref T4140. Allow unapproved users to verify their email addresses. Currently, unapproved blocks email verification, but should not.
Test Plan: Clicked email verification link as an unapproved user, got email verified.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T4140
Differential Revision: https://secure.phabricator.com/D7618
Summary: ...and get the basic edit flow "working" for a new NuanceSourceDefinition - the Phabricator Form. ...and fix a dumb bug in the query class so when you redirect to the view page / try to edit an existing NuanceSource you don't fatal.
Test Plan: played around with the edit form and it worked!
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7585
Summary:
Fixes T4041. We currently detect when "origin" is incorrect, but can do better:
- When "origin" is missing, we can add it. This happens for Git 1.7.1 -- see T4041.
- When "origin" is wrong, we can fix it automatically if we control the repository.
We only need to fail when origin exists, is wrong, and we aren't in charge of the repository.
Test Plan: Ran `bin/repository discover X` on a repository with a good origin, no origin, a bad-but-under-control origin, and a bad-out-of-control origin. Got the right behavior in all cases.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, champo
Maniphest Tasks: T4041
Differential Revision: https://secure.phabricator.com/D7614
Summary:
This cleans up some garbage:
- We were specifying environmental variables with `X=y git ...`, but now have `setEnv()` on both `ExecFuture` and `PhutilExecPassthru`. Use `setEnv()`.
- We were specifying the working directory with `(cd %s && git ...)`, but now have `setCWD()` on both `ExecFuture` and `PhutilExecPassthru`. Use `setCWD()`.
- We were specifying the Git credentials with `ssh-agent -c (ssh-add ... && git ...)`. We can do this more cleanly with `GIT_SSH`. Use `GIT_SSH`.
- Since we have to write a script for `GIT_SSH` anyway, use the same script for Subversion and Mercurial.
This fixes two specific issues:
- Previously, we were not able to set `-o StrictHostKeyChecking=no` on Git commands, so the first time you cloned a git repo the daemons would generally prompt you to add `github.com` or whatever to `known_hosts`. Since this was non-interactive, things would mysteriously hang, in effect. With `GIT_SSH`, we can specify the flag, reducing the number of ways things can go wrong.
- This adds `LANG=C`, which probably (?) forces the language to English for all commands. Apparently you need to install special language packs or something, so I don't know that this actually works, but at least two users with non-English languages have claimed it does (see <https://github.com/facebook/arcanist/pull/114> for a similar issue in Arcanist).
At some point in the future I might want to combine the Arcanist code for command execution with the Phabricator code for command execution (they share some stuff like LANG and HGPLAIN). However, credential management is kind of messy, so I'm adopting a "wait and see" approach for now. I expect to split this at least somewhat in the future, for Drydock/Automerge if nothing else.
Also I'm not sure if we use the passthru stuff at all anymore, I may just be able to delete that. I'll check in a future diff.
Test Plan: Browsed and pulled Git, Subversion and Mercurial repositories.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7600
Summary:
Ref T2230. SVN has some weird rules about path construction. Particularly, if you're missing a "/" in the remote URI right now, the change parsing step doesn't build the right paths.
Instead, build the right paths more intelligently.
Test Plan: Added and executed unit tests. Imported an SVN repo.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, jpeffer
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7590
Summary:
Fixes T4132. If you run "bin/auth recover" before setting the base URI, it throws when trying to generate a production URI.
Instead, just show the path. We can't figure out the domain, and I think this is less confusing than showing "your.phabricator.example.com", etc.
Test Plan: Ran `bin/auth recover <user>` for valid and missing base-uri.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4132
Differential Revision: https://secure.phabricator.com/D7615
Summary:
Ref T4122. Implements a credential management application for the uses described in T4122.
@chad, this needs an icon, HA HA HAHA HA BWW HA HA HA
bwahaha
Test Plan: See screenshots.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: chad, aran
Maniphest Tasks: T4122
Differential Revision: https://secure.phabricator.com/D7608
Summary:
We've been having trouble with viewing diffs timing out when there's a lot of unit test failures. It was caused by formatting userdata for every single failure. The expensive part of this was actually creating the engine for every result, so moved the construction outside of the loop.
Diffs that timed out (2 min) loading before load in around 6 seconds now.
Test Plan: Loaded diffs that used to time out. Verified that details still looked right when Show Full Unit Test Results Is Clicked.
Reviewers: epriestley, keegancsmith, lifeihuang, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran, andrewjcg
Differential Revision: https://secure.phabricator.com/D7581
Summary:
Ref T4110. This denormalized field used to power "Group By: Assigned" got dropped in the T2217 migration at some point.
Restore its population, and fix all the data in the database.
Test Plan: Ran migration, verified database came out reasonable-looking. Reassigned a task, verified database. Ran a "Group By: assigned" query.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4110
Differential Revision: https://secure.phabricator.com/D7602
Summary:
Fixes T4109. If a revision has a bad `repositoryPHID` (for example, because the repository was deleted), `DifferentialRevisionQuery` calls `didRejectResult()` on it, which raises a policy exception, even if the viewer is omnipotent. This aborts the `MessageParser`, because it does not expect policy exceptions to be raised for an omnipotent viewer.
Fix this in two ways:
# Never raise a policy exception for an omnipotent viewer. I think this is the expected behavior and a reasonable rule.
# In this case, load the revision for an omnipotent viewer.
This feels a little gross, but it's the only place where we do this in the codebase right now. We can clean this up later on once it's more clear what the circumstances of checks like these are.
Test Plan: Set a revision to have an invalid `repositoryPHID`, ran message parser on it, got a clean parse.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4109
Differential Revision: https://secure.phabricator.com/D7603
Summary:
Ref T2230. When fully set up, we have up to three users who all need to write into the repositories:
- The webserver needs to write for HTTP receives.
- The SSH user needs to write for SSH receives.
- The daemons need to write for "git fetch", "git clone", etc.
These three users don't need to be different, but in practice they are often not likely to all be the same user. If for no other reason, making them all the same user requires you to "git clone httpd@host.com", and installs are likely to prefer "git clone git@host.com".
Using three different users also allows better privilege separation. Particularly, the daemon user can be the //only// user with write access to the repositories. The webserver and SSH user can accomplish their writes through `sudo`, with a whitelisted set of commands. This means that even if you compromise the `ssh` user, you need to find a way to escallate from there to the daemon user in order to, e.g., write arbitrary stuff into the repository or bypass commit hooks.
This lays some of the groundwork for a highly-separated configuration where the SSH and HTTP users have the fewest privileges possible and use `sudo` to interact with repositories. Some future work which might make sense:
- Make `bin/phd` respect this (require start as the right user, or as root and drop privileges, if this configuration is set).
- Execute all `git/hg/svn` commands via sudo?
Users aren't expected to configure this yet so I haven't written any documentation.
Test Plan:
Added an SSH user ("dweller") and gave it sudo by adding this to `/etc/sudoers`:
dweller ALL=(epriestley) SETENV: NOPASSWD: /usr/bin/git-upload-pack, /usr/bin/git-receive-pack
Then I ran git pushes and pulls over SSH via "dweller@localhost". They successfully interacted with the repository on disk as the "epriestley" user.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7589
Summary: Although I don't want to end up with 20 of these again, this is a reasonable default to provide, particularly for installs where a large portion of the userbase primarily reports bugs and does not interact with them directly.
Test Plan: Hit `/maniphest/`, saw "Subscribed", clicked it, saw the tasks I'm subscribed to.
Reviewers: jbrown, btrahan
Reviewed By: jbrown
CC: aran
Maniphest Tasks: T4100
Differential Revision: https://secure.phabricator.com/D7586
Summary:
A usable, Land to GitHub flow.
Still to do:
- Refactor all git/hg stratagies to a sane structure.
- Make the dialogs Workflow + explain why it's disabled.
- Show button and request Link Account if GH is enabled, but user is not linked.
- After refreshing token, user ends up in the settings stage.
Hacked something in LandController to be able to show an arbitrary dialog from a strategy.
It's not very nice, but I want to make some more refactoring to the controller/strategy/ies anyway.
Also made PhabricatorRepository::getRemoteURIObject() public, because it was very useful in getting
the domain and path for the repo.
Test Plan:
Went through these flows:
- load revision in hosted, github-backed, non-github backed repos to see button as needed.
- hit land with weak token - sent to refresh it with the extra scope.
- Land to repo I'm not allowed - got proper error message.
- Successfully landed; Failed to apply patch.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T182
Differential Revision: https://secure.phabricator.com/D7555
Summary:
Ref T4039. This fixes an issue where a user with the ability to create repositories could view repositories he is otherwise not permitted to see, by following these steps:
- Suppose you want to see repository "A".
- Create a repository with the same VCS, called "B".
- Edit the local path, changing "/var/repo/B" to "/var/repo/A".
- Now it points at a working copy of a repository you can't see.
- Although you won't be able to make it through discovery (the pull will fail with the wrong credentials), you can read some information out of the repository directly through the Diffusion UI, probably?
I'm not sure this was really practical to execute since there are a bunch of sanity checks along most/all of the major pathways, but lock it down since normal users shouldn't be editing it anyway. In the best case, this would make a mess.
Test Plan: {F81391}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4039
Differential Revision: https://secure.phabricator.com/D7580
Summary:
Ref T4039. This is mostly to deal with that, to prevent the security issues associated with mutable local paths. The next diff will lock them in the web UI.
I also added a confirmation prompt to `bin/repository delete`, which was a little scary without one.
See one comment inline about the `--as` flag. I don't love this, but when I started adding all the stuff we'd need to let this transaction show up as "Administrator" it quickly got pretty big.
Test Plan: Ran `bin/repository edit ...`, saw an edit with a transaction show up on the web UI.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4039
Differential Revision: https://secure.phabricator.com/D7579
Summary:
Fixes T4095. Fixes T3817.
- The batch editor has some funky handle code which misses projects, share that.
- Remove some hacks for T3817 that should be good now.
Test Plan: Looked at batch editor, saw projects. Looked at task list.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, martin.schulz
Maniphest Tasks: T3817, T4095
Differential Revision: https://secure.phabricator.com/D7578
Summary:
Fixes T3741. The flag is respected in terms of actually creating the account, but the UI is a bit unclear.
This can never occur naturally, but installs can register an event which locks it.
Test Plan:
Artificially locked it, verified I got more reasonable UI;
{F81282}
Reviewers: btrahan, datr
Reviewed By: datr
CC: aran
Maniphest Tasks: T3741
Differential Revision: https://secure.phabricator.com/D7577
Summary:
- Add an option for the queue.
- By default, enable it.
- Dump new users into the queue.
- Send admins an email to approve them.
Test Plan:
- Registered new accounts with queue on and off.
- As an admin, approved accounts and disabled the queue from email.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7576
Summary:
- If you're an administrator and there are users waiting for approval, show a count on the home page.
- Sort out the `isUserActivated()` access check.
- Hide all the menu widgets except "Logout" for disabled and unapproved users.
- Add a "Log In" item.
- Add a bunch of unit tests.
Test Plan: Ran unit tests, clicked around as unapproved/approved/logged-in/logged-out users.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, chad
Differential Revision: https://secure.phabricator.com/D7574
Summary:
Nothing fancy here, just:
- UI to show users needing approval.
- "Approve" and "Disable" actions.
- Send "Approved" email on approve.
- "Approve" edit + log operations.
- "Wait for Approval" state for users who need approval.
There's still no natural way for users to end up not-approved -- you have to write directly to the database.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7573
Summary:
Mailbox sometimes (?) changes the case of the email address (?). Be more liberal in what we accept.
Also fix a minor output bug.
Test Plan: Sent mail to `e1+...` instead of `E1+...`, verified it arrived.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7575
Summary:
Small step forward which improves existing stuff or lays groudwork for future stuff:
- Currently, to check for email verification, we have to single-query the email address on every page. Instead, denoramlize it into the user object.
- Migrate all the existing users.
- When the user verifies an email, mark them as `isEmailVerified` if the email is their primary email.
- Just make the checks look at the `isEmailVerified` field.
- Add a new check, `isUserActivated()`, to cover email-verified plus disabled. Currently, a non-verified-but-not-disabled user could theoretically use Conduit over SSH, if anyone deployed it. Tighten that up.
- Add an `isApproved` flag, which is always true for now. In a future diff, I want to add a default-on admin approval queue for new accounts, to prevent configuration mistakes. The way it will work is:
- When the queue is enabled, registering users are created with `isApproved = false`.
- Admins are sent an email, "[Phabricator] New User Approval (alincoln)", telling them that a new user is waiting for approval.
- They go to the web UI and approve the user.
- Manually-created accounts are auto-approved.
- The email will have instructions for disabling the queue.
I think this queue will be helpful for new installs and give them peace of mind, and when you go to disable it we have a better opportunity to warn you about exactly what that means.
Generally, I want to improve the default safety of registration, since if you just blindly coast through the path of least resistance right now your install ends up pretty open, and realistically few installs are on VPNs.
Test Plan:
- Ran migration, verified `isEmailVerified` populated correctly.
- Created a new user, checked DB for verified (not verified).
- Verified, checked DB (now verified).
- Used Conduit, People, Diffusion.
Reviewers: btrahan
Reviewed By: btrahan
CC: chad, aran
Differential Revision: https://secure.phabricator.com/D7572
Summary:
Ref T3472. Currently, if an install only allows "@mycompany.com" emails and you try to register with an "@personal.com" account, we let you pick an "@mycompany.com" address instead. This is secure: you still have to verify the email. However, it defies user expectation -- it's somewhat confusing that we let you register. Instead, provide a hard roadblock.
(These accounts can still be linked, just not used for registration.)
Test Plan: See screenshot.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3472
Differential Revision: https://secure.phabricator.com/D7571
Summary: See private chatter. Make it explicitly clear when adding a provider that anyone who can browse to Phabricator can register.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7570
Summary: We don't actually support this yet, so hide the configuration.
Test Plan: Edited branches for an hg repo.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7563
Summary:
Ref T2230. As far as I can tell, getting SVN working over HTTP is incredibly complicated. It's all DAV-based and doesn't appear to have any kind of binary we can just execute and pass requests through to. Don't support it for now.
- Disable it in the UI.
- Make sure all the error messages are reasonable.
Test Plan: Tried to HTTP an SVN repo. Tried to clone a Git repo with SVN, got a good error message.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7562
Summary:
Fixes T3034. This is obsoleted by modern policies.
This was written by a Facebook intern and is rarely used -- the Hive install might be the only use in the wild. It has never really worked correctly.
Test Plan: `grep`; browsed Differential.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3034
Differential Revision: https://secure.phabricator.com/D7568
Summary: Fixes T3535. Also, flip flop on that spacing thing and make the spaces purdy
Test Plan: got an arcanist projected phid in the json dict
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T3535
Differential Revision: https://secure.phabricator.com/D7565
Summary: adds FIELD_PROJECTS and deploys it to Maniphest Task Herald Adapter. Went with "projects" because it feels like that could go well in other Adapters that want to conditionalize based on project.
Test Plan: made a new herald rule to be cc'd if project foo was on a task. it worked!
Reviewers: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7564
Summary:
Ref T2230. Very rarely, even though we've flushed the connection and sent all the data, we'll close the connection before Git is happy with it and it will flip out with an error like this:
fatal: The remote end hung up unexpectedly
fatal: early EOF
fatal: index-pack failed
This is hard to reproduce because it depends on the order of read/write operations we can't directly control. I only saw it about 2% of the time, by just running `git pull` over and over again.
Waiting for Git to close its side of the connection seems to fix it.
Test Plan: Ran `git clone` a ton of times without seeing the error again. Ran `git push` a ton of times with new commits.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7558
Summary:
Ref T2230. The SVN protocol has a sensible protocol format with a good spec here:
http://svn.apache.org/repos/asf/subversion/trunk/subversion/libsvn_ra_svn/protocol
Particularly, compare this statement to the clown show that is the Mercurial wire protocol:
> It is possible to parse an item without knowing its type in advance.
WHAT A REASONABLE STATEMENT TO BE ABLE TO MAKE ABOUT A WIRE PROTOCOL
Although it makes substantially more sense than Mercurial, it's much heavier-weight than the Git or Mercurial protocols, since it isn't distributed.
It's also not possible to figure out if a request is a write request (or even which repository it is against) without proxying some of the protocol frames. Finally, several protocol commands embed repository URLs, and we need to reach into the protocol and translate them.
Test Plan: Ran various SVN commands over SSH (`svn log`, `svn up`, `svn commit`, etc).
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7556
Summary:
Ref T2230. This is substantially more complicated than Git, but mostly because Mercurial's protocol is a like 50 ad-hoc extensions cobbled together. Because we must decode protocol frames in order to determine if a request is read or write, 90% of this is implementing a stream parser for the protocol.
Mercurial's own parser is simpler, but relies on blocking reads. Since we don't even have methods for blocking reads right now and keeping the whole thing non-blocking is conceptually better, I made the parser nonblocking. It ends up being a lot of stuff. I made an effort to cover it reasonably well with unit tests, and to make sure we fail closed (i.e., reject requests) if there are any parts of the protocol I got wrong.
A lot of the complexity is sharable with the HTTP stuff, so it ends up being not-so-bad, just very hard to verify by inspection as clearly correct.
Test Plan:
- Ran `hg clone` over SSH.
- Ran `hg fetch` over SSH.
- Ran `hg push` over SSH, to a read-only repo (error) and a read-write repo (success).
Reviewers: btrahan, asherkin
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7553
Summary: Ref T2230. Fixes T4079. As it turns out, this is Git being weird. See comments for some detials about what's going on here.
Test Plan: Created shallow and deep Git clones.
Reviewers: hach-que, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4079, T2230
Differential Revision: https://secure.phabricator.com/D7554
Summary:
Ref T2230. In Git, we can determine if a command is read-only or read/write from the command itself, but this isn't the case in Mercurial or SVN.
For Mercurial and SVN, we need to proxy the protocol that's coming over the wire, look at each request from the client, and then check if it's a read or a write. To support this, provide a more flexible version of `passthruIO`.
The way this will work is:
- The SSH IO channel is wrapped in a `ProtocolChannel` which can parse the the incoming stream into message objects.
- The `willWriteCallback` will look at those messages and determine if they're reads or writes.
- If they're writes, it will check for write permission.
- If we're good to go, the message object is converted back into a byte stream and handed to the underlying command.
Test Plan: Executed `git clone`, `git clone --depth 3`, `git push` (against no-write repo, got error), `git push` (against valid repo).
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, asherkin, aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7551
Summary: Missing some `break;`, pretty sure this is causing the issue on `secure.phabricator.com`.
Test Plan: Will push.
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7559
Summary: This CAN_EDIT capability doesn't exist. `PhabricatorMacroCapabilityManage::CAPABILITY` (checked on line 15) is used instead.
Test Plan: Disabled, then re-enabled a macro.
Reviewers: hach-que, btrahan
Reviewed By: hach-que
CC: aran
Differential Revision: https://secure.phabricator.com/D7550
Summary:
Now that diffs have PHIDs we can create buildables for them.
This also adds `buildable.diff` in the variables list so the diff ID is available, and it also fixes the Cancel button on "Edit Plan" page so it redirects to the right place.
Test Plan: Created a buildable from a diff, ran a build plan against it that had `echo ${buildable.diff}` and got the right ID. Also tested the "Edit Plan" cancel redirect.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7546
Summary:
This uses an event listener to render the status of builds on their buildables. The revision and commit view now renders out the status of each of the builds.
Currently the revision controller has the results for the latest diff rendered out. We might want to show the status of previous diffs in the future, but for now I think the latest diff should do fine.
There's also a number of bug fixes in this diff, including a particularly nasty one where builds would have a build plan PHID generated for them, which resulted in handle lookups always returning invalid objects.
Test Plan: Ran builds against diffs and commits, saw them appear on the revision and commit view controllers.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7544
Summary:
Ref T1049. This is very minimal, but does what it says.
I merged the variable replacement code so Remote + HTTP can share more stuff.
Test Plan:
Ran "HTTP" and "Remote" build plans.
{F79886}
{F79887}
Reviewers: hach-que, btrahan
Reviewed By: hach-que
CC: zeeg, aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7541
Summary: This prevents a crash in applying build plans when more than one buildable exists for the same object. It also adds a check into the "New Manual Build" page to ensure that users can't create a buildable for an object that already has one.
Test Plan: Tried to create a buildable for an object that already has one and a nice friendly error appeared. Applied a build plan to a buildable whose object has two buildables and didn't get a crash any more.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7543
Summary: This adds a `build.id` variable, cleans up the naming convention of other variables and also fixes an issue in the remote command to read the buffers after the command finishes.
Test Plan: Ran a build with `/bin/echo ${build.id}` and saw the build ID come through.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7540
Summary: This puts back the stronger variable replacement that was missed the last update to D7519.
Test Plan: Re-ran a remote build that had variables in the command and everything worked as expected.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7539
Summary: This fixes an issue where content would be discarded when the content to append is larger than the chunk size limit.
Test Plan: Tested running a remote command that does `I=0; while true; do echo "$I"; I=$[$I+1]; done` and all of the outputted numbers matched the line numbers in the logs.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7537
Summary: This adds a build step implementation for running a command on a remote machine over SSH. It supports merging in various variables about the build (such as the commit hash / revision ID, repository call sign, version control type and clone URI).
Test Plan: Configured a build plan to run `/bin/true` on localhost and the build passed. Configured a build plan to run `/bin/false` on localhost and the build failed.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7519
Summary:
Depends on D7519.
This implements support for build logs in Harbormaster. This includes support for appending to a log from the "Run Remote Command" build step.
It also adds the ability to cancel builds.
Currently the build view page doesn't update the logs live; I'm sure this can be achieved with Javelin, but I don't have enough experience with Javelin to actually make it poll from updates to content in the background.
{F79151}
{F79153}
{F79150}
{F79152}
Test Plan:
Tested this by setting up SSH on a Windows machine and using a Remote Command configured with:
```
C:\Windows\system32\cmd.exe /C cd C:\Build && mkdir Build_${timestamp} && cd Build_${timestamp} && git clone --recursive https://github.com/hach-que/Tychaia.git && cd Tychaia && Protobuild.exe && C:\Windows\Microsoft.NET\Framework\v4.0.30319\MSBuild.exe Tychaia.Windows.sln
```
and observed the output of the build stream from the Windows machine into Phabricator.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7521
Summary: these transactions should //never// merge since they are always created for a 1:1 replacement. (ie any merging would be implicitly erroneous). Fixes T4081
Test Plan: made a mock with three images and replaced all three successfully. replaced image A with image B, did not save, replaced image B with image C, then saved and verified transaction correctly showed image A replaced with image C.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4081
Differential Revision: https://secure.phabricator.com/D7536
Summary:
Depends on D7500.
This seemed like a pretty good idea once I thought of it. Instead of having some custom triggering logic instead Harbormaster, I figured it best to leverage all of Herald's power so that users can create rules to apply builds to commits and differential revisions. This gives the added advantage that they can trigger off builds for particular types of revisions and commits, which seems like it could be really useful (e.g. run extra tests against revisions that touch sensitive areas of the code).
Test Plan: Ran the usual daemons + the Harbormaster daemon. Pushed a commit to the repository and saw both the buildable and build get created when the commit worked picked it up. Submitted a diff and saw both the buildable and build get created when the Herald rules were evaluated for the diff.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran, hwinkel
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7501
Summary: another little piece here that basically just adds some permissions to source editing. serving it up before I do anything too complicated to make sure it seems kosher. in terms of what comes next this form needs to be dynamic based on source type so there'll be some fun there. That said, I plan to implement a more simple "phabricator form" only version to start here and flesh out a few other things like queues with that.
Test Plan: set permission to no one for source edit and got a nice error page.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7535
Summary: I've kept this as close as possible to the Git version for ease of review and later refactoring of them both together. At minimum, the functions to get the working dir should probably be cleaned up one day.
Test Plan: Landed a revision.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7534
Summary:
See <https://github.com/facebook/phabricator/issues/433>. We were missing a "^" here.
This should be moved over to transactions soon and then we can get rid of the duplication. :/
Test Plan: Tried to create a repository with callsign "9X", got a helpful error about "ALL UPPERCASE LETTERS".
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7531
Summary:
After upgrading to PHP 5.5, the conduit list was not fully visible because
INF was being treated as "0" for some reason. Fixed by making it a PHP_MAX_INT
Test Plan: Checked on PHP 5.5
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7530
Summary:
Fixes T4067. The way `DiffusionCommitQuery` works prevents it from loading SVN identifiers in some cases without additional constraints, since "12345" might be an SVN revision 12345, or it might be the first 5 characters of a Git commit hash.
Introduce `withRepository()` as a shorthand for `withDefaultRepository()` + `withRepositoryIDs()`. This tells the query to:
- Only look in the given repository; and
- use the more liberal identifier resolution rules while doing so.
The practical impact this has is that blame tooltips in SVN work again. The other queries which are fixed here were never run in SVN (which doesn't have first-class branches or tags); I've cleaned them up only for completeness.
Test Plan:
- Viewed blame in SVN, saw information again instead of empty tooltip.
- Viewed brnaches/tags in Mercurial and Git.
{F79226}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4067
Differential Revision: https://secure.phabricator.com/D7523
Summary:
we were just checking if projects/ was in the URI before barfing. Use some more fun utility functions such that we only complain if there is no project.
Fixes T4071.
Test Plan: made a subpage under a project - success! tried to make a project wiki page where there was no project - successful failure! tried to make a project wiki sub page where there was no project - successful failure!
Reviewers: epriestley, chad
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4071
Differential Revision: https://secure.phabricator.com/D7527
Summary:
See discussion in <https://github.com/facebook/phabricator/issues/430>.
(If we end up with more than like 5 of these we should probably make this a warning or something instead, the only goal is to prevent user error.)
Test Plan:
{F79196}
{F79197}
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran, enko
Differential Revision: https://secure.phabricator.com/D7522
Summary: The "Reviewers" condition in Differential Revision rules has the wrong typeahead and can't select projects, but should be able to.
Test Plan: {F79273}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7526
Summary: Ref T2230. This is easily the worst thing I've had to write in a while. I'll leave some notes inline.
Test Plan: Ran `hg clone http://...` on a hosted repo. Ran `hg push` on the same. Changed sync'd both ways.
Reviewers: asherkin, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7520
Summary: This is starting to get a bit sizable and it turns out Mercurial is sort of a beast, so split the VCS serve stuff into a separate controller.
Test Plan: Pushed and pulled an authenticated Git repository.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, hach-que
Differential Revision: https://secure.phabricator.com/D7494
Summary: Ref T4068. Partly, this moves discovery to the more unit-testable PhabricatorRepositoryDiscoveryEngine. It also fixes some issues, see inlines.
Test Plan: In a Mercurial repository, ran `bin/repository discover --repair`, verified commits came out topographically sorted. Ran without `--repair` and in various other contexts, like with no commits to discover and some-but-not-all commits to discover.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4068
Differential Revision: https://secure.phabricator.com/D7518
Summary:
I updated the wiki too - https://secure.phabricator.com/w/projects/pebkac/ - with what I am thinking right now. Rough plan here is
- next diff:
- implement editors and transactions
- implement "web type" for contact source
- /pebkac/item/new/ will be the entry point for this
- implement "actions" on a contact
- probably some "polish" on the scaffolding laid out here; like "create" permissions maybs
- diffs after that:
- implement "twitter" type for source
- implement email reply handler stuff for item and source
Probs a great time to blast huge holes in all this stuff. :D
Test Plan: these pages load and arc lint doesn't complain
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran, chad
Differential Revision: https://secure.phabricator.com/D7465
Summary:
Ref T1049. Ref T2222. `DifferentialDiff` does not currently have a PHID, but we need it for Harbormaster and ApplicationTransactions. See some discussion in D7501.
(I split the SQL into two sections so we can't fail in the middle. At some point, I'd like to do a pass on the migration stuff and get this happening automatically, and also simplify the PatchList.)
Test Plan:
- Ran `bin/storage upgrade`.
- Checked for valid PHIDs in the database.
- Used `phid.query` to look up a diff by PHID.
- Created a new diff and verified it got a PHID.
Reviewers: btrahan, hach-que
Reviewed By: btrahan
CC: aran, vrana
Maniphest Tasks: T2222, T1049
Differential Revision: https://secure.phabricator.com/D7513
Summary: Ref T4068. Adds a command to list all commits in an "importing" status. This will allow users to use `reparse.php` to diagnose and repair issues.
Test Plan:
- Ran `bin/repository importing P`, etc.
- Used `reparse.php` to reparse some commit stages and saw status update correctly.
- Ran on a repo with no importing commits.
- Ran with `... --simple | xargs`, which saves us having to put an `awk` or something in there for users.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4068
Differential Revision: https://secure.phabricator.com/D7515
Summary:
Ref T4068. In some cases like that one, I anticipate a repository not fully importing when a handful of random commits are broken. In the long run we should just deal with that properly, but in the meantime provide an administrative escape hatch so you can mark the repository as imported and get it running normally.
The major reason to do this is that Herald, Feed, Harbormaster, etc., won't activate until a repository is "imported".
Test Plan:
- Tried to mark an imported repository as imported, got an "already imported" message.
- Same for not-imported.
- Marked a repository not-imported.
- Marked a repository imported.
- Marked a repository not-imported, then waited for the daemons to mark it imported again automatically.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, kbrownlees
Maniphest Tasks: T4068
Differential Revision: https://secure.phabricator.com/D7514
Summary: Ref T1049. Nothing fancy, but shows red for fail/error and green for pass. See discussion in D7502.
Test Plan: {F78839}
Reviewers: hach-que, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7512
Summary:
Depends on D7501.
This just renders the buildable's actual object name onto the list, so you can see at a glance what the buildable represents. I'd like to also pull across a list of builds of this buildable and change the bar color, but I'm not quite sure how to do that in the search architecture without N+1 querying.
Test Plan:
Looked at the buildable list and it looked like this:
{F78555}
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7502
Summary: Cleans up some CSS while adding lots of other... Mainly, this allow min-width "tables" that trigger a scroll-bar, but go full width if larger than min.
Test Plan: Tested Workboard Examples and some Project pages, Chrome, Tablet and Mobile Layouts
Reviewers: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7509
Summary: This is a little funky but fixes an issue with Git repos that are
non-bare needing "origin/" to resolve branches other than "master". Eventually
this should get cleaned up.
Test Plan: Reporting user verified this fixed their issue.
Auditors: btrahan
Summary: Ref T4064. The response code here isn't normally relevant, but we can hit these via `git clone http://../`, etc., and it's clearly more correct to use HTTP 500.
Test Plan: Added a fake `throw new Exception()` and verified I got an HTTP 500 response.
Reviewers: jamesr, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4064
Differential Revision: https://secure.phabricator.com/D7507
Summary: This implements an interface for adding new build steps, editing existing build steps and deleting build steps from build plans. It uses the settings definitions on the build implementation to work out what fields should be displayed on the edit page.
Test Plan:
See screenshots:
{F78529}
{F78532}
{F78528}
{F78531}
{F78527}
{F78530}
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7500
Summary:
Depends on D7498.
This implements support for a "build step implementation". Build steps have an associated class name (which makes the class in PHP) and a details field, which is serialized JSON (same as PhabricatorRepository).
This also implements a SleepBuildStepImplementation which just pauses the build for a specified period of seconds.
Test Plan:
Inserted a build step with `insert into harbormaster_buildstep (phid, buildPlanPHID, className, details, dateCreated, dateModified) values ('', 'PHID-HMCP-zkh5w6czfbfpk2gxwdeo', 'SleepBuildStepImplementation', '{"seconds":5}', NOW(), NOW());` (adjusting the build plan PHID as appropriate).
Started the daemon and applied the build plan to a buildable, and saw the daemon take a 5 second delay after creating `SleepBuildStepImplementation`.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran, chad
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7499
Summary:
ref T182.
Simple approach of clone, patch, push. While waiting for drydock, implement a hackish mutex
setup for the workspace, which should work ok as long as there's only one committer who is
carefull about theses things.
Less obvious note: This is taking the both author and commiter's 'primary email' for the commit -
which might rub some people wrong.
Test Plan:
With a hosted repo, created some diffs and landed them.
Also clicked button for some error cases, got the right error message.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: hach-que, Korvin, epriestley, aran
Maniphest Tasks: T182
Differential Revision: https://secure.phabricator.com/D7486
Summary: This implements a basic Harbormaster daemon that takes pending builds and builds them (currently just sleeps 15 seconds before moving to passed state). It also implements an interface to apply a build plan to a buildable, so that users can kick off builds for a buildable.
Test Plan: Ran `bin/phd debug PhabricatorHarbormasterBuildDaemon` and used the interface to start some builds by applying a build plan. Observed them move from 'pending' to 'building' to 'passed'.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7498
Summary:
Fixes T4060. The logic here is:
- When you take several actions at once, we show a single feed story for all of them.
- We choose the "most interesting" title for the feed story. For example, "close task" is more interesting than "add CC".
Currently, the issue with this is:
- "Add comment" is the //least interesting// title. I think this is correct: all other actions are more interesting than the fact that you added a comment.
- We try to conserve the number of objects we need to load by rendering only the most interesting transaction.
To fix this:
- Stop being so conservative; load all of the transactions and all of their PHIDs.
- Add bodies from any transactions which render bodies. In all cases (I think?) this is a maximum of one comment adding a body.
The end result is a story like this:
epriestley closed T123: the building is on fire.
"Okay guys I put the fire out"
Test Plan: See screenshot.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran, asherkin
Maniphest Tasks: T4060
Differential Revision: https://secure.phabricator.com/D7504
Summary:
Expands on D7488, which looks way better than the config checks. I'm leaving the config checks for now, but maybe we should just get rid of them? This advice is delivered in a far more timely way.
- Check for normal VCS binaries too.
- Link to `environment.append-paths`.
- Get rid of untranslated names (I think they're probably not too useful?)
Test Plan: See screenshots.
Reviewers: hach-que, btrahan
Reviewed By: hach-que
CC: aran
Differential Revision: https://secure.phabricator.com/D7495
Summary:
Currently if 'git-http-backend' is not on the PATH, there is no visible message to the user other than "info/refs: is this a valid git repository?" when trying to clone. This adds a setup check so that if there are any Git repositories in use, it will check for the existance of the "git-http-backend" binary in the PATH.
I believe this is shipped by default alongside the git package on most distros, but in some (such as OpenSUSE), this binary isn't on the PATH by default.
Test Plan: Removed `/usr/lib/git` from my `environment.append-paths` and saw the message appear. Added it back and the message went away.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4050
Differential Revision: https://secure.phabricator.com/D7488
Summary:
Ref T1493. Diffusion has some garbagey behavior for things we can't resolve. Common cases are:
- Looking at a branch that doesn't exist.
- Looking at a repository with no branches.
- Looking at a commit that doesn't exist.
- Looking at an empty repository.
In these cases, we generally fatal unhelpfully. I want to untangle this mess.
This doesn't help much, but does clean things up a bit. We currently have two separate query paths, "stablecommitname" and "expandshortcommit". These are pretty much doing the same thing -- taking some ref like "master" or "default" or a tag name or part of a commit name, and turning it into a full commit name. Merge them into a single "resolverefs" method.
This simplifies the code a fair bit, and gives us better error messages. They still aren't great, but they're like this now:
Ref "7498aec194ecf2d333e0e2baddd9d5cdf922d7f1" is ambiguous or does not exist.
...instead of just:
ERR-INVALID-COMMIT
Test Plan: Looked at Git, Mercurial and Subversion repositories that were empty and non-empty. Looked at branches/heads. Tried to look at invalid commits. Looked at tags. All of this still works, and some behaviors are a bit better than they used to be.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1493
Differential Revision: https://secure.phabricator.com/D7484
Summary: Fixes the junk I broke in D7484. Before that, tag content was a side effect of resolving the ref name. Now, fetch it explicitly in `diffusion.tagsquery`.
Test Plan: Looked at a tag, saw the annotation/message.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7485
Summary: This puts Conduit calls into the "Services" tab. They aren't always real service calls, but I think they're big enough to belong there and be useful.
Test Plan: Viewed "Services" tab, saw conduit calls.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7482
Summary: Ref T1493. Consolidate these a bit; they might need some more magic once we do `--noupdate` checkouts. Mostly just trying to clean up and centralize this code a bit.
Test Plan: Viewed and `bin/repository discover`'d Mercurial repos with and without any branches.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1493
Differential Revision: https://secure.phabricator.com/D7480
Summary: The idea is to have all `phtize` definitions in applications to allow their separation.
Test Plan: Clicked View Options after mangling the translation.
Reviewers: epriestley
Reviewed By: epriestley
CC: btrahan, Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7345
Summary: Adds summary (description) and test plan icons to make these area's more unique and differentiated over general sections.
Test Plan: Test a diff, a commit, a task
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7493
Summary: This disables CSRF checking around the `$repository->writeStatusMessage` so that pushing changes over HTTP to Git repositories doesn't fail miserably.
Test Plan: Applied this fix and I could `git push` to hosted repositories again.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4052
Differential Revision: https://secure.phabricator.com/D7490
Summary: This fixes an issue where Git authentication would always fail on an install with `policy.allow-public` set to false. This is because when public access is allowed, anonymous users can query the user list. However, when public access is not allowed, you have to be authenticated before you can read any of the user objects.
Test Plan:
Prior to this fix, I get:
```
james@james-laptop:~/git/8> git clone http://phabricator.local/diffusion/TEST/
Cloning into 'TEST'...
fatal: unable to access 'http://phabricator.local/diffusion/TEST/': The requested URL returned error: 403
```
when `policy.allow-public` is false. After this fix I get:
```
james@james-laptop:~/git/8> git clone http://phabricator.local/diffusion/TEST/
Cloning into 'TEST'...
remote: Counting objects: 102, done.
remote: Compressing objects: 100% (71/71), done.
remote: Total 102 (delta 6), reused 0 (delta 0)
Receiving objects: 100% (102/102), 9.89 KiB | 0 bytes/s, done.
Resolving deltas: 100% (6/6), done.
Checking connectivity... done
```
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4049
Differential Revision: https://secure.phabricator.com/D7489
Summary: This implements Conduit calls for querying Phame blogs and Phame posts.
Test Plan: Made some calls and they seem to generally work.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T3695
Differential Revision: https://secure.phabricator.com/D7478
Summary: This adds support for a Conduit method to process Remarkup content in bulk. It also updates the `getEngineContexts` methods to support any missing contexts.
Test Plan: Ran the command and processed a few sets of text.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4046
Differential Revision: https://secure.phabricator.com/D7479
Summary: This adds pht's and such english to Phriction email body.
Test Plan: Edited a Document, Moved a Document. Got new emails. Such Wow.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7477
Summary:
Ref T2230. This will need some more refinement, but basically it adds a "Create" vs "Import" step before we go through the paged workflow.
- If you choose "Create", we skip the remote URI / auth stuff, and then set the "hosted" flag.
- If you choose "Import", we do what we do now.
Test Plan: Created and imported repos.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7475
Summary:
Hosted repositories only sometimes survive the pull/discover phases right now, due to issues like:
- Pull tries to `git clone`, but should `git init`.
- Mercurial doesn't handle empty repositories with on branches.
- SVN tries to connect to an invalid remote.
- None of them set the INIT repo flag correctly, so status doesn't get updated properly in the UI.
Fix all this stuff.
Test Plan:
- For each of Git, SVN and Mercurial:
- Created a new repository from the web UI in a deactivated state.
- Made it hosted.
- Manually ran pull/discover.
- Verified we end up with initialized, empty repositories in consistent states.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7474
Summary:
- Warn about "Read/Write" instead of disabling it, to prevent edits which mutate it after changing a hosted repository to an unhosted one.
- Warn about authenticated connections with HTTPS auth disabled, and link to the relevant setting.
- When "Autoclose" is disabled, show that "Autoclose Branches" won't have an effect.
- For hosted repositories, show the HTTP and SSH clone URIs.
- Make them easy to copy/paste.
- Link to credential management.
- Show if they're read-only.
- This could be a bit nicer-looking than it is.
Test Plan: Looked at repositories in a bunch of states and made various edits to them.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: chad, aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7471
Summary:
See <https://github.com/facebook/phabricator/issues/425>. There are some ways that the change parsers may not reach `finishParse()`, but we now need them to in order to mark the commit imported, advance the progress bar, and eventually kick the repository out of IMPORTING status.
Take all the copy/pasted code in the parsers and move it into the parent. Specifically, this is:
- Printing a status message about starting a parse;
- checking for bad commits;
- queueing the next parse stage; and
- marking the import step complete.
Test Plan: Used `reparse.php --change` to reparse Git, SVN and Mercurial repos.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7470
Summary: Depends on D7642. This updates the authentication logic so that HTTP writes can be made to Git repositories hosted by Phabricator.
Test Plan: Set the policy to allow me to push and I was able to. Changed the policy to disallow push and I was no longer able to push.
Reviewers: #blessed_reviewers, hach-que
Reviewed By: hach-que
CC: Korvin, epriestley, aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7468
Summary: This allows users to set their HTTP access passwords via Diffusion interface.
Test Plan: Clicked the "Set HTTP Access Password" link, set a password and saw it appear in the DB.
Reviewers: #blessed_reviewers, hach-que, btrahan
Reviewed By: hach-que
CC: Korvin, epriestley, aran, jamesr
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7462
Summary:
Ref T2350. Fixes T2231.
- Adds log flags around discovery.
- Adds message flags for "needs update". This is basically an out-of-band hint to the daemons that a repository should be pulled sooner than normal. We set the flag when users push a revision, and expose a Conduit method that `arc land` will be able to use.
Test Plan: See screenshots.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2350, T2231
Differential Revision: https://secure.phabricator.com/D7467
Summary:
I pulled these into the property list recently, which made them more consistent, but that dropped "preserve linebreaks". Since these usually come from the CLI, render with linebreaks preserved.
@csilvers, you'll need to `bin/cache purge --purge-remarkup` after this if you want to fix existing revisions.
Test Plan: Made a revision with some poetry, saw poetry preserved.
Reviewers: btrahan, csilvers
Reviewed By: btrahan
CC: csilvers, aran
Differential Revision: https://secure.phabricator.com/D7464
Summary: At least under GitHub, the token value is stored as "null", and not missing. And `null > anything` is false, so Phabricator thinks the token is expired or not there.
Test Plan: http://ph.vm/settings/panel/external/ before shows "No OAuth Access Token," and after it says "Active OAuth Token".
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7466
Summary:
`RepositoryStatusMessage` is basically a key/value table associated with a repository that I'm using to let the daemons store the most recent event of a given type, so we can easily show it on the status dashboard. I think this will be a lot easier for users to figure out than digging through logfiles.
I'm also going to write the "this needs a pull" status here eventually, for reducing the time lapse between pushes and discovery.
- Add storage for these messages.
- Have the pull engine populate the INIT phase. I'll do the FETCH phase next.
- Update the status readout to show all the various states.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7461
Summary: This moved into Diffusion in D7458 and is now presented in a much cleaner, more targeted way.
Test Plan: Loaded `/repository/`.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7459
Summary:
Replace the blanket "daemons not running" warning with a lot more specific detail, to try to make it easier for users to figure out how to set up repositories correctly.
The next change here will add some additional status information from the daemons, so this panel can report results in greater detail.
Test Plan: See screenshots.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7458
Summary:
- Use DiffusionCommitQuery
- Get rid of the "Author" column.
- Collapse commit + revision together.
- Better tooltips to cover for the removed information.
- Colorize only the "line" column.
- Generally, reduce the amount of visual noise and non-code-stuff going on in this interface.
- I'd like to make the "<<" thing look nicer too but that might take some actual design.
Test Plan: See screenshots.
Reviewers: btrahan, chad
Reviewed By: chad
CC: chad, aran
Differential Revision: https://secure.phabricator.com/D7457
Summary: Minor cleanup. Make the "imported" check less strict (we don't need owners or herald to show change status). Export the "imported" flag over Conduit.
Test Plan: Viewed tag table. Viewed partially imported repositories.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7455
Summary: Swap to DiffusionCommitQuery, other minor cleanup.
Test Plan: Viewed page, forced error view and looked at it.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7454
Summary: See @scottmac's reply in T3982. It looks like his email client uses the standard quote string, but includes it in the quoted block.
Test Plan: Added a failing unit test, made it pass.
Reviewers: btrahan
Reviewed By: btrahan
CC: scottmac, aran
Differential Revision: https://secure.phabricator.com/D7440
Summary: I'm planning to add more detailed info to Diffusion itself, but catch the big issue here.
Test Plan: Hit config issue locally, then resolved it.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7439
Summary: The new "importStatus" property provides a much stronger and more consistent version of this flag. The only callsite was removed by D7452.
Test Plan: Used `grep` to check for callsites and found none.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7453
Summary:
Ref T2716.
- Serve from `DiffusionCommitQuery`, not `PhabricatorAuditCommitQuery` (which should probably die).
- Fix logic for `limit`, which incorrectly failed to display the "Showing %d branches." text.
- Clean up things a touch.
- I didn't end up actually needing `needCommitData()`, but left it in there since I think it will be needed soon.
- Removed a "TODO" because I don't remember what "etc etc" means.
Test Plan: Looked at branches in several repositories.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2716
Differential Revision: https://secure.phabricator.com/D7451
Summary: If you load Diffusion between a repository being pulled and discovered, you can end up with a valid commit reference that hasn't been discovered yet. Don't fatal.
Test Plan: Saw somewhat-helpful error page instead of fatal.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7448
Summary: Ref T2230. This cleans up D7442, by using `git for-each-ref` everywhere we can, in a basically reasonable way.
Test Plan:
In bare and non-bare repositories:
- Ran discovery with `bin/repository discover`;
- listed branches on `/diffusion/X/`;
- listed tags on `/diffusion/X/`;
- listed tags, branches and refs on `/diffusion/rXnnnn`.
Reviewers: btrahan, avivey
Reviewed By: avivey
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7447
Summary: Fixes T4035. I removed these two "remote/" things in rP59922b7, but we need them for non-bare repositories. Without them, the commands work and run fine and the output looks OK, but the results may not reflect the correct information (e.g., the log shows the working copy's master, which may not be in the same state as origin/master). I'm going to generally clean this up, but unbreak it for now.
Test Plan: Viewed bare and non-bare repositories in Diffusion, got accurate history.
Reviewers: btrahan, hach-que
Reviewed By: btrahan
CC: aran, mbishopim3
Maniphest Tasks: T4035
Differential Revision: https://secure.phabricator.com/D7445
Summary: Makes Legalpad a little easier to grok.
Test Plan: View Document
Reviewers: epriestley, btrahan
Reviewed By: btrahan
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7460
Summary: The warning panel on large commits in diffusion was being overrun with other styles. Fixes T3952
Test Plan: test on a large commit
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T3952
Differential Revision: https://secure.phabricator.com/D7456
Summary: We don't have a section header on `/diffusion/X/` for descriptions right now. Add one to improve consistency.
Test Plan: Looked at a repository.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D7449
Summary: Helps make it seem more q/a like and consistent.
Test Plan: Look at question
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7450
Summary:
Ref T2230. Although all the non-bare commands //run// fine in bare repos, not all of them do exactly the same thing.
This could use further cleanup, but at least get it working again for now.
Test Plan: Ran `bin/repository pull`, `bin/repository discover`, viewed Diffusion (looked at branch table), viewed a commit (looked at "Branches"), for bare and non-bare git repos.
Reviewers: avive, btrahan, avivey
Reviewed By: avivey
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7442
Summary: Updates the review status list to align better inside property lists. Alsu uses the default colors a bit more. This removes an overflow hidden on the value side, but that shouldnt cause any issues, given it has plenty of space.
Test Plan: tested differential and audit, highlighted and not.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7441
Summary:
Relocated files aren't treated as newly created files by the worker. This
can lead to the worker trying to look up information about deleted files
in the wrong location.
Test Plan: See T4030
Reviewers: #blessed_reviewers, epriestley
Reviewed By: epriestley
CC: epriestley, aran
Maniphest Tasks: T4030
Differential Revision: https://secure.phabricator.com/D7432
Summary: Fixes T4028, makes the table a bit easier to read and navigate changesets.
Test Plan: Tested a big history, back to original and latest.
Reviewers: epriestley, btrahan
CC: Korvin, epriestley, aran
Maniphest Tasks: T4028
Differential Revision: https://secure.phabricator.com/D7438
Summary:
Fixes T3619. These URIs are valid:
git@domain.com:/path (Git SCP-style implicit SSH)
ssh://git@domain.com/path (Explicit SSH)
This URI, arrived at by adding "ssh://" to the front of an SCP-style URI, is not:
ssh://git@domain.com:/path
Detect URIs in this form and reject them. See T3619.
Test Plan:
{F75486}
Also set some valid URIs.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3619
Differential Revision: https://secure.phabricator.com/D7431
Summary:
This doesn't really impact anything very much, but is a little cleaner than cloning repositories with a working copy. It's somewhat important for allowing pushes, because you can't push to a checked-out branch.
Mercurial has a similar option (`--noupdate`) but leave that alone for now.
The origin stuff was mostly for sanity/explicitness purposes -- I believe it's safe to remove in all non-ridiculous cases. Git fails with it in bare repositories (it automatically creates an `origin`, but doesn't create the local refs for it, or something).
Test Plan: Nuked a repo, re-cloned it, pulled and updated it several times. Browsed both bare and non-bare repos in Diffusion.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7430
Summary:
Fixes T3217. Ref T776. Ref T1493. Broadly, this introduces a mechanism which works like this:
- When a repository is created, we set an "importing" flag.
- After discovery completes, we check if a repository has no importing commits. Basically, this is the first time we catch up to HEAD.
- If we're caught up, clear the "importing" flag.
This flag lets us fix some issues:
- T3217. Currently, when you import a new repository and users have rules like "Email me on every commit ever" or "trigger an audit on every commit", we take a bunch of publish actions. Instead, implicitly disable publishing during import.
- An imported but un-pulled repository currently has an incomprehensible error on `/diffusion/X/`. Fix that.
- Show more cues in the UI about importing.
- Made some exceptions more specific.
Test Plan:
This is the new screen for a completely new repo, replacing a giant exception:
{F75443}
- Created a repository, saw it "importing".
- Pulled and discovered it.
- Processed its commits.
- Ran discovery again, saw import flag clear.
- Also this repository was empty, which hit some of the other code.
This is the new "parsed empty repository" UI, which isn't good, but is less broken:
{F75446}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, hach-que
Maniphest Tasks: T3607, T1493, T776, T3217
Differential Revision: https://secure.phabricator.com/D7429
Summary:
Fixes T3416. Fixes T1733.
- Adds a flag to the commit table showing whether or not we have parsed it.
- The flag is set to `0` initially when the commit is discovered.
- The flag is set to `1` when the changes are parsed.
- The UI can now use the flag to distinguish between "empty commit" and "commit which we haven't imported changes for yet".
- Simplify rendering code a little bit.
- Fix an issue with the Message parser for empty commits.
- There's a key on the flag so we can do `SELECT * FROM repository_commit WHERE repositoryID = %d AND importStatus = 0 LIMIT 1` soon, to determine if a repository is fully imported or not. This will let us improve the UI (Ref T776, Ref T3217).
Test Plan:
- Ran `bin/storage upgrade -f`.
- Created an empty commit.
- Without the daemons running, ran `bin/repository pull GTEST` and `bin/repository discover GTEST`.
- Viewed web UI to get the first screenshot ("Still Importing...").
- Ran the message and change steps with `scripts/repository/reparse.php`.
- Viewed web UI to get the second screenshot ("Empty Commit").
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T776, T1733, T3416, T3217
Differential Revision: https://secure.phabricator.com/D7428
Summary:
- Don't try to pull hosted repos.
- Also, fix the `--verbose` + `--trace` interaction for `bin/repository`.
- Also, fix a couple of unit tests which got tweaked earlier.
Test Plan:
$ ./bin/repository pull GTEST --verbose
Pulling 'GTEST'...
Repository "GTEST" is hosted, so Phabricator does not pull updates for it.
Done.
Reviewers: btrahan, hach-que
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7427
Summary: We've had support for this for a long time, but it was conditional on config. Since it more-or-less actually does something now, just enable it unconditionally.
Test Plan: Settings -> SSH Public Keys
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7426
Summary: Looks like this is pretty straightforward; same as the reads except mark it as needing PUSH.
Test Plan: Ran `git push`, pushed over SSH to a hosted repo.
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7425
Summary: Like D7423, but for SSH.
Test Plan: Ran `git clone ssh://...`, got a clone.
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7424
Summary: Mostly ripped from D7391. No writes yet.
Test Plan: Ran `git clone` against a local over HTTP, got a clone.
Reviewers: btrahan, hach-que
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7423
Summary:
- Add web UI for configuring SSH hosting.
- Route git reads (`git-upload-pack` over SSH).
Test Plan:
>>> orbital ~ $ git clone ssh://127.0.0.1/
Cloning into '127.0.0.1'...
Exception: Unrecognized repository path "/". Expected a path like "/diffusion/X/".
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
>>> orbital ~ $ git clone ssh://127.0.0.1/diffusion/X/
Cloning into 'X'...
Exception: No repository "X" exists!
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
>>> orbital ~ $ git clone ssh://127.0.0.1/diffusion/MT/
Cloning into 'MT'...
Exception: This repository is not available over SSH.
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
>>> orbital ~ $ git clone ssh://127.0.0.1/diffusion/P/
Cloning into 'P'...
Exception: TODO: Implement serve over SSH.
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7421
Summary:
Fixes T2229. This sets the stage for a patch similar to D7417, but for SSH. In particular, SSH 6.2 introduced an `AuthorizedKeysCommand` directive, which lets us do this in a mostly-reasonable way without needing users to patch sshd (if they have a recent enough version, at least).
The way the `AuthorizedKeysCommand` works is that it gets run and produces an `authorized_keys`-style file fragment. This isn't ideal, because we have to dump every key into the result, but should be fine for most installs. The earlier patch against `sshd` passes the public key itself, which allows the script to just look up the key. We might use this eventually, since it can scale much better, so I haven't removed it.
Generally, auth is split into two scripts now which mostly do the same thing:
- `ssh-auth` is the AuthorizedKeysCommand auth, which takes nothing and dumps the whole keyfile.
- `ssh-auth-key` is the slightly cleaner and more scalable (but patch-dependent) version, which takes the public key and dumps only matching options.
I also reworked the argument parsing to be a bit more sane.
Test Plan:
This is somewhat-intentionally a bit obtuse since I don't really want anyone using it yet, but basically:
- Copy `phabricator-ssh-hook.sh` to somewhere like `/usr/libexec/openssh/`, chown it `root` and chmod it `500`.
- This script should probably also do a username check in the future.
- Create a copy of `sshd_config` and fix the paths/etc. Point the KeyScript at your copy of the hook.
- Start a copy of sshd (6.2 or newer) with `-f <your config file>` and maybe `-d -d -d` to foreground and debug.
- Run `ssh -p 2222 localhost` or similar.
Specifically, I did this setup and then ran a bunch of commands like:
- `ssh host` (denied, no command)
- `ssh host ls` (denied, not supported)
- `echo '{}' | ssh host conduit conduit.ping` (works)
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Maniphest Tasks: T2229, T2230
Differential Revision: https://secure.phabricator.com/D7419
Summary:
Mostly ripped from D7391, with some changes:
- Serve repositories at `/diffusion/X/`, with no special `/git/` or `/serve/` URI component.
- This requires a little bit of magic, but I got the magic working for Git, Mercurial and SVN, and it seems reasonable.
- I think having one URI for everything will make it easier for users to understand.
- One downside is that git will clone into `X` by default, but I think that's not a big deal, and we can work around that in the future easily enough.
- Accept HTTP requests for Git, SVN and Mercurial repositories.
- Auth logic is a little different in order to be more consistent with how other things work.
- Instead of AphrontBasicAuthResponse, added "VCSResponse". Mercurial can print strings we send it on the CLI if we're careful, so support that. I did a fair amount of digging and didn't have any luck with git or svn.
- Commands we don't know about are assumed to require "Push" capability by default.
No actual VCS data going over the wire yet.
Test Plan:
Ran a bunch of stuff like this:
$ hg clone http://local.aphront.com:8080/diffusion/P/
abort: HTTP Error 403: This repository is not available over HTTP.
...and got pretty reasonable-seeming errors in all cases. All this can do is produce errors for now.
Reviewers: hach-que, btrahan
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7417
Summary:
Basically straight from D7391. The differences are basically:
- Policy stuff is all application-scope instead of global-scope.
- Made a few strings a little nicer.
- Deleted a bit of dead code.
- Added a big "THIS DOESN'T WORK YET" warning.
Test Plan: See screenshots.
Reviewers: hach-que, btrahan
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7416
Summary: No editing or view yet, just adds the schema and a policy default. Part of D7391.
Test Plan: `bin/storage upgrade`
Reviewers: hach-que, btrahan
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7415
Summary: Ref T2231. Get rid of the old create controller and make the button go to the new stuff instead. This will eventually get cleaned up more, but I don't have a clear plan for Arcanist Projects yet.
Test Plan: Clicked button, hit new workflow.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2231
Differential Revision: https://secure.phabricator.com/D7414
Summary:
Ref T2231. This:
- Activates the new multi-step workflow, and exposes it in the UI.
- Adds "can create", "default view" and "default edit" capabilities.
- Provides a default value for `repository.default-local-path` and forces repositories into it by default. It's still editable, but Phabricator gets it correct (for some definition of correct) by default now.
Test Plan: Created some new repositories with the new workflow.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1286, T2231
Differential Revision: https://secure.phabricator.com/D7413
Summary:
Ref T2231. I didn't port these options over, so they're still supported but have no edit UI:
- Pull Frequency (confusing/not useful, I think?)
- Default Owners Path (probably used only by Facebook and only in the E repository)
- Show user in public repository URL (probably mostly obsolete with hosting?)
We can add those back if users notice, but they seem like the three least useful options so I'm going to see if we can get away with removing them.
Test Plan: Clicked "Edit" from Repositories, got kicked into the nice new Diffusion edit UI instead of the old one.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2231
Differential Revision: https://secure.phabricator.com/D7410
Summary: Ref T2231. This just moves the "Delete" dialog from Repositories to Diffusion. This dialog just shows instructions and isn't interesting.
Test Plan: {F75093}
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T2231
Differential Revision: https://secure.phabricator.com/D7412
Summary: Ref T2231. Use status info element instead of tags.
Test Plan: {F75092}
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T2231
Differential Revision: https://secure.phabricator.com/D7411
Summary: Fixes T1286. Ref T2231. See previous diffs; same as the others but does "Local Path".
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1286, T2231
Differential Revision: https://secure.phabricator.com/D7409
Summary: Ref T2231. Crumbs in the Diffusion edit workflow are a bit wonky, with stuff like "rP (master)" which isn't very useful and no link back to the main "Edit" page. Make them consistent across all the screens.
Test Plan: Loaded a bunch of these screens and saw sane crumbs on all of them.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2231
Differential Revision: https://secure.phabricator.com/D7407
Summary:
@chad is hitting an issue described in P961, which I think is this bug in PHP: https://bugs.php.net/bug.php?id=43200
Work around it by defining a "PHIDInterface" and having both "Flaggable" and "Policy" extend it, so that there is only one `getPHID()` declaration.
Test Plan: shrug~
Reviewers: chad, btrahan
Reviewed By: chad
CC: chad, aran
Differential Revision: https://secure.phabricator.com/D7408
Summary: Ref T2231. The policy rules are a little murky right now: the "Edit Repository" link requires CAN_EDIT, but the actualy page doesn't. Instead, require CAN_EDIT for the edit page.
Test Plan: As a user without CAN_EDIT, viewed a repository and clicked the edit link.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2231
Differential Revision: https://secure.phabricator.com/D7406
Summary:
Ref T2231. Allows you to edit the remote URI and credentials.
This is a little bit funky because I'm reusing some of the pages on the new (not-yet-hooked-up) create form. Specifically, it had pages like this:
- Repo Type
- Name/Callsign/Remote
- Auth
- Done
I split "Name/Callsign/Remote" into "Name/Callsign" and "Remote", then when editing the remote I just take you through "Remote" and "Auth" and then back. This lets us reuse the giant pile of protocol/URI sanity checking logic and ends up being pretty clean, although it's a little weird that the "Create" controller does both full-create and edit-remote.
Test Plan: See screenshots.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: chad, aran
Maniphest Tasks: T2231
Differential Revision: https://secure.phabricator.com/D7405
Summary: Ref T2231. Brings "Notify/Publish" and "Autoclose" to the new UI.
Test Plan: See screenshots.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2231
Differential Revision: https://secure.phabricator.com/D7402
Summary: also add a few more words
Test Plan: looks good!
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7404
Summary: See title. Fixes T1809.
Test Plan:
verified each type that has flaggable interface still can be flagged
verified that new custom query filter works
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T1809
Differential Revision: https://secure.phabricator.com/D7392
Summary: Some scripts might find it easier to work with PHIDs instead of user names.
Test Plan:
Use ?assign=<username> and ?assign=<PHID-USER> with the create task URI.
See assignee input being filled correctly.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: epriestley
CC: epriestley, aran, Korvin
Differential Revision: https://secure.phabricator.com/D7401
Summary: First cut of an 'info panel' for phabricator. Basic concept is for display a list of items with a bit more info and depth and an object item list. Projects could be a good first example.
Test Plan: UIExamples
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7398
Summary:
Projects and priority inputs can be prefilled similar to how title
and description fields work.
Prefilling of projects already worked but used PHIDs instead of
more user friendly name so I changed that too.
Test Plan:
Visit [[/maniphest/task/create/?projects=Maniphest;Easy&priority=100&assign=vrana&title=Hip-hip&description=hooray!|example]]
and see prefilled form fields.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7394
Summary:
Gets rid of some old Differential-specific nonsense and replaces it with general runtime-pluggable Remarkup rules.
Facebook: This removes two options which may be in use. Have any classes being added via config here just subclass the new abstract bases instead. This should take 5 seconds to fix. You can adjust order by overriding `getPriority()` on the rules, if necessary.
Test Plan: See comments.
Reviewers: btrahan
Reviewed By: btrahan
CC: FacebookPOC, andrewjcg, aran
Differential Revision: https://secure.phabricator.com/D7393
Summary: More Diffusion/Differential touch ups, ToC, etc.
Test Plan: Look at colors, see that they match or look better.
Reviewers: epriestley, btrahan
Reviewed By: btrahan
CC: Korvin, epriestley, aran
Maniphest Tasks: T3952
Differential Revision: https://secure.phabricator.com/D7386
Summary: Changes to checkmark and crossed circle to match active projects
Test Plan: installed and uninstalled an application. poor conpherence.
Reviewers: epriestley, btrahan
Reviewed By: btrahan
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7390
Summary:
This code is a little funky right now, and can return `array("error message")` and then try to call `getHunks()` on it. Additionally, each field loads the commit's changes separately.
Instead, load the commit's changes once and cache them, and handle exceptions appropriately.
Test Plan:
- Created a rule like "changed, added, removed content all match /.*/" to force all fields to generate.
- Ran it successfully.
- Faked an error and ran it, got reasonable results.
Reviewers: btrahan
Reviewed By: btrahan
CC: bigo, aran
Differential Revision: https://secure.phabricator.com/D7384
Summary:
Ref T1049. I don't really want to sink too much time into this right now, but a seemingly reasonable architecture came to me in a dream. Here's a high-level overview of how things fit together:
- **"Build"**: In Harbormaster, "build" means any process we want to run against a working copy. It might actually be building an executable, but it might also be running lint, running unit tests, generating documentation, generating symbols, running a deploy, setting up a sandcastle, etc.
- `HarbormasterBuildable`: A "buildable" is some piece of code which build operations can run on. Generally, this is either a Differential diff or a Diffusion commit. The Buildable class just wraps those objects and provides a layer of abstraction. Currently, you can manually create a buildable from a commit. In the future, this will be done automatically.
- `HarbormasterBuildStep`: A "build step" is an individual build operation, like "run lint", "run unit", "build docs", etc. The step defines how to perform the operation (for example, "run unit tests by executing 'arc unit'"). In this diff, this barely exists.
- `HarbormasterBuildPlan`: This glues together build steps into groups or sequences. For example, you might want to "run unit", and then "deploy" if the tests pass. You can create a build plan which says "run step "unit tests", then run step "deploy" on success" or whatever. In the future, these will also contain triggers/conditions ("Automatically run this build plan against every commit") and probably be able to define failure actions ("If this plan fails, send someone an email"). Because build plans will run commands, only administrators can manage them.
- `HarbormasterBuild`: This is the concrete result of running a `BuildPlan` against a `Buildable`. It tracks the build status and collects results, so you can see if the build is running/successful/failed. A `Buildable` may have several `Build`s, because you can execute more than one `BuildPlan` against it. For example, you might have a "documentation" build plan which you run continuously against HEAD, but a "unit" build plan which you want to run against every commit.
- `HarbormasterBuildTarget`: This is the concrete result of running a `BuildStep` against a `Buildable`. These are children of `Build`. A step might be able to produce multiple targets, but generally this is something like "Unit Tests" or "Lint" and has an overall status, so you can see at a glance that unit tests were fine but lint had some issues.
- `HarbormasterBuildItem`: An optional subitem for a target. For lint, this might be an individual file. For unit tests, an individual test. For normal builds, an executable. For deploys, a server. For documentation generation, there might just not be subitems.
- `HarbormasterBuildLog`: Provides extra information, like command/execution transcripts. This is where stdout/stderr will get dumped, and general details and other messages.
- `HarbormasterBuildArtifact`: Stores side effects or results from build steps. For example, something which builds a binary might put the binary in "Files" and then put its PHID here. Unit tests might put coverage information here. Generally, any build step which produces some high-level output object can use this table to record its existence.
This diff implements almost nothing and does nothing useful, but puts most of these object relationships in place. The two major things you can't easily do with these objects are:
1) Run arbitrary cron jobs. Jenkins does this, but it feels tacked on and I don't know of anyone using it for that. We could create fake Buildables to get a similar effect, but if we need to do this I'd rather do it elsewhere in general. Build and cron/service/monitoring feel like pretty different problems to me.
2) Run parameterized/matrix steps (maybe?). Bamboo has this plan/stage/task/job breakdown where a build step can generate a zillion actual jobs, like "build client on x86", "build server on x86", "build client on ARM", "build server on ARM", etc. We can sort of do this by having a Step map to multiple Targets, but I haven't really thought about it too much and it may end up being not-great. I'd guess we have like an 80% chance of getting a clean implementation if/when we get there. I suspect no one actually needs this, or when they do they'll just implement a custom Step and it can be parameterized at that level. I'm not too worried about this overall.
The major difference between this and Jenkins/Bamboo/TravisCI is that all three of those are **plan-centric**: the primary object in the system is a build plan, and the dashboard shows you all your build plans and the current status. I don't think this is the right model. One disadvantage is that you basically end up with top-level messaging that says "Trunk is broken", not "Trunk was broken by commit af32f392f". Harbormaster is **buildable-centric**: the primary object in the system is stuff you can run build operations against (commits/branches/revisions), and actual build plans are secondary. The main view will be "recent commits on this branch, and whether they're good or not" -- which I think is what's most important in a larger/more complex product -- not the pass/fail status of all jobs. This also makes it easier and more natural to integrate with Differential and Diffusion, which both care about the overall status of the commit/revision, not the current status of jobs.
Test Plan: Poked around, but this doesn't really do anything yet.
Reviewers: btrahan
Reviewed By: btrahan
CC: zeeg, chad, aran, seporaitis
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7368
Summary: Ref T4010. Adds a history page and restores the transaction title strings, which previously sort-of existed in the defunct feed story class.
Test Plan: See screenshots.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T4010
Differential Revision: https://secure.phabricator.com/D7371
Summary:
Ref T4010. Projects have a weird proto-version of ApplicationTransactions which is very similar but not quite the same.
Move the storage to a modern format, but keep all the other code for now.
Test Plan: Migrated project transactions; edited projects.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4010
Differential Revision: https://secure.phabricator.com/D7370
Summary:
Conduit doesn't currently have an analog to "shouldAllowPublic", so the recent policy checks added here caught legitimate Conduit calls when viewing Diffusion as a logged-out user.
Add `shouldAllowPublic()` and set it for all the Diffusion queries.
(More calls probably need this, but we can add it when we hit them.)
Test Plan: Looked at Diffusion as a logged-out user with public access enabled.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7380
Summary: `class_exists()` is case-insensitive, but `PhabricatorApplication::getByClass()` is not.
Test Plan: Fixed unit test to fail, then fixed code to pass unit test.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7379
Summary:
Ref T1344. This is //very// rough. Some UI issues:
- Empty states for the board and columns are junky.
- Column widths are crazy. I think we need to set them to fixed-width, since we may have an arbitrarily large number of columns?
- I don't think we have the header UI elements in M10 yet and that mock is pretty old, so I sort of very roughly approximated it.
- What should we do when you click a task title? Popping the whole task in a dialog is possible but needs a bunch of work to actually work. Might need to build "sheets" or something.
- Icons are slightly clipped for some reason.
- All the backend stuff is totally faked.
Generally, my plan is just to use these to implement all of T390. Specifically:
- "Kanban" projects will have "Backlog" on the left. You'll drag them toward the right as you make progress.
- "Milestone" projects will have "No Milestone" on the left, then "Milestone 9", "Milestone 8", etc.
- "Sprint" projects will have "Backlog" on the left, then "Sprint 31", "Sprint 30", etc.
So all of these things end up being pretty much exactly the same, with some minor text changes and new columns showing up on the left vs the right or whatever.
Test Plan: See screenshot.
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: chad, aran, sascha-egerer
Maniphest Tasks: T1344
Differential Revision: https://secure.phabricator.com/D7374
Summary:
While we mostly have reasonable effective object accessibility when you lock a user out of an application, it's primarily enforced at the controller level. Users can still, e.g., load the handles of objects they can't actually see. Instead, lock the queries to the applications so that you can, e.g., never load a revision if you don't have access to Differential.
This has several parts:
- For PolicyAware queries, provide an application class name method.
- If the query specifies a class name and the user doesn't have permission to use it, fail the entire query unconditionally.
- For handles, simplify query construction and count all the PHIDs as "restricted" so we get a UI full of "restricted" instead of "unknown" handles.
Test Plan:
- Added a unit test to verify I got all the class names right.
- Browsed around, logged in/out as a normal user with public policies on and off.
- Browsed around, logged in/out as a restricted user with public policies on and off. With restrictions, saw all traces of restricted apps removed or restricted.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7367
Summary:
Ref T2222. Shrink the API to make it easier to move this object's storage to ApplicationTransactions.
Fixes T3415. This moves the "Summary" and "Test Plan" into the property list, and thereby fixes all the attribution problems associated with commandeering, creating a revision from another user's diff, etc.
Test Plan: Browsed several revisions.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3415, T2222
Differential Revision: https://secure.phabricator.com/D7375
Summary: Ref T4010. Adds storage and indexes for custom fields. These tables are the same as people/maniphest/differential.
Test Plan: Ran `bin/storage upgrade`.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T4010
Differential Revision: https://secure.phabricator.com/D7369
Summary:
Fixes T3675.
- Maniphest had a couple of old non-event listeners; move them to events.
- Make most of the similar listeners a little more similar.
- Add checks for access to the application.
Test Plan:
- Viewed profile, project, task, revision.
- Clicked all the actions.
- Blocked access to various applications and verified the actions vanished.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3675
Differential Revision: https://secure.phabricator.com/D7365
Summary:
Ref T3675. Some of these listeners shouldn't do their thing if the viewer doesn't have access to an application (for example, users without access to Differential should not be able to "Edit Tasks"). Set the stage for that:
- Introduce `PhabricatorEventListener`, which has an application.
- Populate this for event listeners installed by applications.
- Rename the "PeopleMenu" listeners to "ActionMenu" listeners, which better describes their modern behavior.
This doesn't actually change any behaviors.
Test Plan: Viewed Maniphest, Differntial, People.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3675
Differential Revision: https://secure.phabricator.com/D7364
Summary: Ref T1279. The new stuff seems stable, so stop writes to the old tables.
Test Plan:
- Added and removed reviewers.
- Grepped for `::RELATIONSHIP_TABLE` to verify we really have no more reads.
- Grepped for `::RELATION_REVIEWER`.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1279
Differential Revision: https://secure.phabricator.com/D7360
Summary:
This is primarily a client request, and a little bit use-case specific, but policies seem to be holding up well and I'm getting more comfortable about maintaining this. Much if it can run through ApplicationTransactions.
Allow the ability to edit status, policies, priorities, assignees and projects of a task to be restricted to some subset of users. Also allow bulk edit to be locked. This affects the editor itself and the edit, view and list interfaces.
Test Plan: As a restricted user, created, edited and commented on tasks. Tried to drag them around.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7357
Summary: Fixes T4001. I broke this some time ago and no one has complained. I don't think it gets much use, and we haven't added it for the newer apps. Just get rid of it rather than adapt the URIs for ApplicationSearch.
Test Plan: Unit tests, sent myself some email.
Reviewers: zeeg, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4001
Differential Revision: https://secure.phabricator.com/D7355
Summary: Drop the "Pro" bit.
Test Plan: Created/edited tasks, moved tasks around, generally made a mess. Nothing burned down.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7352
Summary:
We have this commented-out chunk of code now which was originally buggy and is now just nonfunctional.
For now, the core edit types don't always require CAN_EDIT (e.g., subscribe, comment, add edges), except for editing the edit policy itself, which always does. Add a supplemental capability check there and let everything else go through with CAN_VIEW. We can buff the policy checks on application editors over time, they all require appropriate capabilities to get to in the first place anyway.
Test Plan: Created and edited some tasks without getting overwhelmed with policy exceptions.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7351
Summary:
Ref T3569. Two issues:
# Since `sort()` is not stable, instantaneous events (ending on the same second they start) would sometime sort wrong and produce the wrong results. Guarantee they sort correctly.
# Because events can end at any time, there are some additional special cases the algorithm didn't handle properly. Draw a bunch of ASCII art diagrams so these cases work properly.
Test Plan:
- No more fatal when tracking an object for the first time.
- Unit tests.
Reviewers: btrahan
Reviewed By: btrahan
CC: skyronic, aran
Maniphest Tasks: T3569
Differential Revision: https://secure.phabricator.com/D7350
Summary:
Ref T4007. Fixes T4009. Ref T4008.
- Move blurb to a text section.
- Make it render as remarkup.
- Put policy information and status information in header.
Test Plan: See screenshot.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T4009, T4007, T4008
Differential Revision: https://secure.phabricator.com/D7373
Summary:
I'll hold this for a couple weeks.
These classes are now only used to render legacy feed stories. I don't plan to migrate the stories since I don't think they're particularly valuable, and migrating them would be complex and time consuming.
With these classes removed, legacy Maniphest feed stories simply vanish from feed.
Test Plan: `grep`, viewed feed, verified it worked but omitted old-style stories.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7114
Summary: Fixes T3898. This feature needs generalization at some point, but just unbreak it for now since a surprising number of users like it.
Test Plan: Pressed "z".
Reviewers: chad, btrahan
Reviewed By: chad
CC: chad, aran, spicyj
Maniphest Tasks: T3898
Differential Revision: https://secure.phabricator.com/D7366
Summary:
See screenshots. Some simplifications:
- Tabbed and non-tabbed lists are now allowed to be mixed. We just make the non-tabbed lists permanent and put them on the bottom (e.g., image and audio data in Files).
- You can provide a tab name instead of an entire tab object and we'll build an object for you.
- We respect `setSelected()` on the tab objects now.
Test Plan: See screenshots.
Reviewers: chad, btrahan
Reviewed By: chad
CC: chad, aran
Differential Revision: https://secure.phabricator.com/D7362
Summary: Make tabs do stuff when you click 'em.
Test Plan:
- Clicked object box tabs in UIExample.
- Viewed some existing non-tab UIs (Differential, Maniphest).
- Viewed some existing non-tab, multiple-list UIs (Diffusion).
- Grepped for methods I changed.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D7361
Summary:
Ref T2222. This implements step (1) described there, which is moving over all the inline comments.
The old and new tables are simliar. The only real trick here is that `transactionPHID` and `legacyCommentID` mean roughly the same thing (`null` if the inline is a draft, non-null if it has been submitted) but we don't have real `transactionPHID`s yet. We just make some up -- we'll backfill them later.
Two risks here:
- I need to take a second look at the keys on this table. I think we need to tweak them a bit, and it will be less disruptive to do that before this migration than after.
- This will take a while for Facebook, and other large installs with tens of thousands of revisions. I'll communicate this.
I'm otherwise pretty satisfied with this, seems to work well and is pretty low risk / non-disruptive.
Test Plan:
- Before migrating, then after migrating:
- Made a bunch of inlines (drafts, submitted).
- Edited and deleted inlines.
- Verified inlines showed up in preview.
- Verified that inlines aren't indexed when they're drafts (`bin/search index D935`).
- Verified that inlines ARE indexed when they're not drafts.
- Verified that drafts inlines make revisions appear as "with draft" in the revision list.
- Made left, right, and draft inlines.
- Migrated (`bin/storage upgrade`).
- Verified that my inlines from before the migration still showed up.
- (Repeated all the stuff above.)
- Manually inspected the inline comment table.
Reviewers: btrahan
Reviewed By: btrahan
CC: FacebookPOC, aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D7139
Summary: I touched this code recently but it needs an unusual special case because we call through with the "omnipotent user" from the daemons. As per the TODO below, this will all get cleaned up at some point.
Test Plan: Will make @poop verify.
Reviewers: btrahan, poop
Reviewed By: poop
CC: poop, aran
Differential Revision: https://secure.phabricator.com/D7356
Summary: This capability was replaced with an application-wide "manage" capability. It's checked for just above.
Test Plan: Edited audio!
Reviewers: btrahan, ljalonen, chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D7353
Summary:
Ref T3569. Fixes T3567. When figuring out how much time has been spent on an object, subtract "preemptive" events which interrupted the object.
Also, make the UI look vaguely sane:
{F72773}
Test Plan: Added a bunch of unit tests, mucked around in the UI.
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, skyronic, aran
Maniphest Tasks: T3567, T3569
Differential Revision: https://secure.phabricator.com/D7349
Summary: Ref T603. While policies aren't completely perfect, they are substantially functional to the best of my knowledge -- definitely in good enough shape that we want to hear about issues with them, now.
Test Plan: Edited a task, repository, and project.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7343
Summary: Ref T603. If you don't have access to an application, prevent execution of its (authenticated) methods.
Test Plan: Restricted Tokens to only admins, then tried to view/call Token methods as a non-admin.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7342
Summary:
I refactored this recently and accidentally dropped the download URI.
Also fix a warning with, e.g., files named `README`.
Test Plan: Clicked a thumb, clicked "Download", got a file.
Reviewers: chad, btrahan, dctrwatson
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D7341
Summary:
Ref T603. Currently, we render handles the user doesn't have permission to see in a manner identical to handles that don't exist. This is confusing, and not required by policies (which restrict content, but permit knowledge that an object exists).
Instead, render them in different styles. Bad/invalid objects look like:
Unknown Object (Task)
Restricted objects look like:
[o] Restricted Task
...where `[o]` is the padlock icon.
Test Plan:
{F71100}
{F71101}
It's possible this renders weird somewhere, but I wasn't immediately able to find any issues. Yell if you see something.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: chad, aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7334
Summary: Makes it easy to choose distinctive icons for projects.
Test Plan:
{F71018}
{F71020}
{F71019}
{F71021}
Reviewers: btrahan, chad
Reviewed By: chad
CC: chad, aran
Differential Revision: https://secure.phabricator.com/D7333
Summary: Various tweaks and fixes. Adds a File Contents view in Diffusion, normalizes spaces, colors.
Test Plan: tested differential and diffusion in my sandbox.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T3952
Differential Revision: https://secure.phabricator.com/D7325
Summary: See IRC. Someone got a `null` in CCPHIDs somehow. Moving to subscriptions should prevent this, but paper over it for now.
Test Plan: Will have @dctrwatson check.
Reviewers: btrahan, dctrwatson
Reviewed By: btrahan
CC: dctrwatson, aran
Differential Revision: https://secure.phabricator.com/D7330
Summary: Ref T603. Give countdowns proper UI-level policy controls, and an application-level default policy. Put policy information in the header.
Test Plan:
- Adjusted default policy.
- Created new countdowns.
- Edited countdowns.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7322
Summary: Ref T603. Gives the create/edit interface a policy control, and adds an application-level default.
Test Plan: Created and edited polls.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7321
Summary:
Ref T603. Fixes T2823. This updates Paste and Macro.
- **Paste**
- Added default view policy.
- I didn't add a "create" policy, since I can't come up with any realistic scenario where you'd give users access to pastes but not let them create them.
- **Macro**
- Added a "manage" policy, which covers creating and editing macros. This lets an install only allow "People With An Approved Sense of Humor" or whatever to create macros.
- Removed the "edit" policy, since giving individual users access to specific macros doesn't make much sense to me.
- Changed the view policy to the "most public" policy the install allows.
- Added view policy information to the header.
Also fix a couple of minor things in Maniphest.
Test Plan:
- Set Paste policy, created pastes via web and Conduit, saw they got the right default policies.
- Set Macro policy, tried to create/edit macros with valid and unauthorized users.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2823, T603
Differential Revision: https://secure.phabricator.com/D7317
Summary: Adds filetype icons, applying to differential file headers. The main issue is with all the lightening, I wanted something to still anchor 'new file' on the page and adding a sharp icons does that pretty well for me. Feedback is cool too.
Test Plan: Add some new icons, test in previous commits.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7320
Summary: The "user" and "user/project" sources exclude system agents and disabled users, but should not.
Test Plan: Added system agents to Herald rules.
Reviewers: btrahan, bigo
Reviewed By: bigo
CC: aran
Differential Revision: https://secure.phabricator.com/D7319
Summary: Ref T603. When a user selects "Custom", we pop open the rules dialog and let them create a new rule or edit the existing rule.
Test Plan: Set some objects to have custom policies.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7300
Summary:
Instead of returning a blank result it throws exceptions. Fix this up a
little so we get some consistency with differential
Test Plan:
Loaded a bad phid for releeph, returns empty list.
Try a good phid and get 2 releeph merges.
Reviewers: epriestley, elenaperezrioja, dschleimer, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7302
Summary:
Ref T603. Several issues here:
1. Currently, `FileQuery` does not actually respect object attachment edges when doing policy checks. Everything else works fine, but this was missing an `array_keys()`.
2. Once that's fixed, we hit a bunch of recursion issues. For example, when loading a User we load the profile picture, and then that loads the User, and that loads the profile picture, etc.
3. Introduce a "Query Workspace", which holds objects we know we've loaded and know we can see but haven't finished filtering and/or attaching data to. This allows subqueries to look up objects instead of querying for them.
- We can probably generalize this a bit to make a few other queries more efficient. Pholio currently has a similar (but less general) "mock cache". However, it's keyed by ID instead of PHID so it's not easy to reuse this right now.
This is a bit complex for the problem being solved, but I think it's the cleanest approach and I believe the primitive will be useful in the future.
Test Plan: Looked at pastes, macros, mocks and projects as a logged-in and logged-out user.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7309
Summary:
Ref T603. This cleans up an existing callsite in the policy filter, and opens up some stuff in the future.
Some policy objects don't have real PHIDs:
PhabricatorTokenGiven
PhabricatorSavedQuery
PhabricatorNamedQuery
PhrequentUserTime
PhabricatorFlag
PhabricatorDaemonLog
PhabricatorConduitMethodCallLog
ConduitAPIMethod
PhabricatorChatLogEvent
PhabricatorChatLogChannel
Although it would be reasonable to add real PHIDs to some of these (like `ChatLogChannel`), it probably doesn't make much sense for others (`DaemonLog`, `MethodCallLog`). Just let them return `null`.
Also remove some duplicate `$id` and `$phid` properties. These are declared on `PhabricatorLiskDAO` and do not need to be redeclared.
Test Plan: Ran the `testEverythingImplemented` unit test, which verifies that all classes conform to the interface.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7306
Summary: Ref T3958. Adds a provider for Mozilla's Persona auth.
Test Plan:
- Created a Persona provider.
- Registered a new account with Persona.
- Logged in with Persona.
- Linked an account with Persona.
- Dissolved an account link with Persona.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3958
Differential Revision: https://secure.phabricator.com/D7313
Summary:
Ref T603. Although I think the parenthetical is valuable when //setting// policies to make sure no one accidentally opens content up, it's super annoying in headers.
This makes headers say "Public". Everything else still says "Public (No Login Required)".
Test Plan: {F69469}
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7310
Summary:
also try to centralize some of the command parsing logic. note that differential is still an exception here. it uses a whitelist-style regex. i think long-term we should have this for every app but changing it seemed too big for this diff.
Fixes T3937.
Test Plan:
echo '!assign btrahan' | ./bin/mail receive-test --as xerxes --to T22 ; echo '!claim' | ./bin/mail receive-test --as xerxes --to T22
unit tests passed, though my new one is silly
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T3937
Differential Revision: https://secure.phabricator.com/D7307
Summary: Ref T603. Allow the endpoint to take an existing policy PHID to populate the editor and return a useful datastructure.
Test Plan: In the next revision, actually hooked this up.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7299
Summary:
Ref T603. Make these actually implement policy interfaces, so shared infrastructure (like handle loading) works as expected. They don't actually have meaningful policies, and we short circuit all the checks.
(I don't plan to let you set policy controls on policies themselves)
Test Plan: Loaded handles for Policy objects via common infrastructure.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7298
Summary: Ref T603. Fix/provide some rendering stuff related to custom policies.
Test Plan: After setting stuff to custom policies (made easier by future diffs), looked at the various places strings appear in the UI and saw more sensible ones.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7297
Summary: Ref T603. This is "Allow" in the UI, I just mistyped it when I created the constant.
Test Plan: `grep`
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7296
Summary: Ref T603. Adds code to actually execute custom policies. (There's still no way to select them in the UI.)
Test Plan:
- Added and executed unit tests.
- Edited policies in existing applications.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7292
Summary: Fixes T3950. This centers the images, adds a thin blue border, and a transparent background.
Test Plan: Tested a file in Files, Diffusion, and Macro.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T3950
Differential Revision: https://secure.phabricator.com/D7305
Summary: This adds some controllable space between paths in Diffusion headers. Fixes T3951
Test Plan: Tested new links in diffusion.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T3951
Differential Revision: https://secure.phabricator.com/D7304
Summary: Ref T603. After thinking about this for a bit I can't really come up with anything better than what Facebook does, so I'm going to implement something similar for choosing custom policies. To start with, swap this over to a JS-driven dropdown.
Test Plan: See screenshot.
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: chad, aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7285
Summary: This builds out and implements PHUIPropertyListView (container) and PHUIPropertyListItemView (section) as well as adding tabs.
Test Plan: Tested each page I edited with the exception of Releeph and Phortune, though those changes look ok to me diff wise. Updated examples page with tabs.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7283
Summary:
we filter the $actors above such that its possible to have no $actor anymore (if $actor is not a deliverable email address). ergo, make sure we have actor before we start calling methods.
Fixes github issue 403
Test Plan: logic on this one - not 100% sure how to easily reproduce
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7284
Summary:
- Add an extra paginator at the top.
- Add a link to jump to the bottom (where the latest messages are).
- Align paginators with edge of content rather than the page.
Test Plan: Looked at the chatlog.
Reviewers: epriestley, chad, #blessed_reviewers
CC: chad, Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7280
Summary: UX on this could probably be better 'disabled' crumbs don't appear to have any visible difference, and the policy error has to load the /create page rather than being a modal - not sure on the way to fix these.
Test Plan: Tried to create a project with and without access, saw suitable error.
Reviewers: epriestley, #blessed_reviewers
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7279
Summary: Ref T603. I nuked this check by accident and neglected to test the negative case.
Test Plan: Saved a non-public policy (Herald Global) and a public policy (Maniphest View).
Reviewers: asherkin, btrahan
Reviewed By: asherkin
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7278
Test Plan: Looked at Home with Audit installed and uninstalled.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7277
Summary: Ref T603. Currently, we hard-code defense against setting policies to "Public" in several places, and special case only the CAN_VIEW policy. In fact, other policies (like Default View) should also be able to be set to public. Instead of hard-coding this, move it to the capability definitions.
Test Plan: Set default view policy in Maniphest to "Public", created a task, verified default policy.
Reviewers: btrahan, asherkin
Reviewed By: asherkin
CC: asherkin, aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7276
Summary:
Ref T603. This isn't remotely usable yet, but I wanted to get any feedback before I build it out anymore.
I think this is a reasonable interface for defining custom policies? It's basically similar to Herald, although it's a bit simpler.
I imagine users will rarely interact with this, but this will service the high end of policy complexity (and allow the definition of things like "is member of LDAP group" or whatever).
Test Plan: See screenshots.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran, asherkin
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7217
Summary:
Ref T603. Allows the Differential view policy to be configured with a default.
I've omitted "edit" because I want to wait and see how comment/comment-action policies work out. I could imagine locking "edit" down to only the owner at some point, and providing a wider "interact" capability, or something like that, which would cover accept/reject/commandeer. Users in this group could still edit indirectly by commandeering first.
Test Plan: Created new revisions from the CLI and conduit.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7269
Summary:
Ref T603. In thinking about this, I think I went mad with power in creating this capability. I can't imagine any reason to give users access to Herald but not let them create rules.
We can restore this later if some install comes up with a good reason to have it, but in the interest of keeping policies as simple as possible, I think we're better off without it. In particular, if you don't want a group of users creating rules, just lock them out of the application entirely.
The "Manage Global Rules" capability is still around, I think that one's super good.
Test Plan: Edited Herald policies, created a rule.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7268
Summary: Ref T603. Allow global default policies to be configured for tasks.
Test Plan:
- Created task via web UI.
- Created task via Conduit.
- Created task via email.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7267
Summary: Ref T603. When the user encounters an action which is controlled by a special policy rule in the application, make it easier for applications to show the user what policy controls the action and what the setting is. I took this about halfway before and left a TODO, but turn it into something more useful.
Test Plan: See screenshots.
Reviewers: btrahan, chad
Reviewed By: chad
CC: chad, aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7265
Summary: Ref T603. Use more modern elements.
Test Plan: See screenshot.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7264
Summary: Ref T603. Use the new hotness.
Test Plan: Edited Herald in Applications, tried to create rules / global rules without capabilities, got reasonable error messages.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7263
Summary: Adds the abilit to set a status color of warning or fail to navbar tab lists (for objectheaders)
Test Plan: uiexamples, photoshop
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7266
Summary:
Ref T603. I want to let applications define new capabilities (like "can manage global rules" in Herald) and get full support for them, including reasonable error strings in the UI.
Currently, this is difficult for a couple of reasons. Partly this is just a code organization issue, which is easy to fix. The bigger thing is that we have a bunch of strings which depend on both the policy and capability, like: "You must be an administrator to view this object." "Administrator" is the policy, and "view" is the capability.
That means every new capability has to add a string for each policy, and every new policy (should we introduce any) needs to add a string for each capability. And we can't do any piecemeal "You must be a {$role} to {$action} this object" becuase it's impossible to translate.
Instead, make all the strings depend on //only// the policy, //only// the capability, or //only// the object type. This makes the dialogs read a little more strangely, but I think it's still pretty easy to understand, and it makes adding new stuff way way easier.
Also provide more context, and more useful exception messages.
Test Plan:
- See screenshots.
- Also triggered a policy exception and verified it was dramatically more useful than it used to be.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: chad, aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7260
Summary: Ref T603. Apparently we made all policies possible at some point. Go us! This has no callsites.
Test Plan: `grep`, notice it's a private method
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7259
Summary: Ref T1279. Prerequisite for adding icons or other type information to tokenizers, since we don't currently have enough information to prefill them when rendering things from the server side. By passing handles in, the tokenizer can extract type information.
Test Plan:
- Searched by user in Audit.
- Sent Conpherence from profile page.
- Tried to send an empty conpherence.
- Searched Countdown by user.
- Edited CCs in Differential.
- Edited reviewers in Differential.
- Edited a commit's projects.
- Searched lint by owner.
- Searched feed by owner/project.
- Searched files by owner.
- Searched Herald by owner.
- Searched Legalpad by owner.
- Searched Macro by owner.
- Filtered Maniphest reports by project.
- Edited CCs in Maniphest.
- Searched Owners by owner.
- Edited an Owners package.
- Searched Paste by owner.
- Searched activity logs by owner.
- Searched for mocks by owner.
- Edited a mock's CCs.
- Searched Ponder by owner.
- Searched projects by owner.
- Edited a Releeph project's pushers.
- Searched Releeph by requestor.
- Edited "Uses Symbols" for an Arcanist project.
- Edited all tokenizers in main search.
- Searched Slowvote by user.
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1279
Differential Revision: https://secure.phabricator.com/D7248
Summary: Ref T603. We currently bomb out here, but should just continue forward. I'm fairly certain we don't even use this for anything anymore (it has been replaced by "depends on") but need to check that.
Test Plan: Created a new revision with `arc diff`.
Reviewers: ljalonen, btrahan, #blessed_reviewers, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7255
Summary: Ref T1279. I only tested the global case. :O
Test Plan: Created a personal "add me as blocking" rule.
Reviewers: btrahan, zeeg
Reviewed By: zeeg
CC: aran
Maniphest Tasks: T1279
Differential Revision: https://secure.phabricator.com/D7261
Summary:
Ref T603. Ref T1279. Further improves transaction and policy support for Herald.
- Instead of deleting rules (which wipes out history and can't be undone) allow them to be disabled.
- Track disables with transactions.
- Gate disables with policy controls.
- Show policy and status information in the headers.
- Show transaction history on rule detail screens.
- Remove the delete controller.
- Support disabled queries in the ApplicationSearch.
Test Plan:
- Enabled and disabled rules.
- Searched for enabled/disabled rules.
- Verified disabled rules don't activate.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1279, T603
Differential Revision: https://secure.phabricator.com/D7247
Summary:
Ref T1279. This is a logical change.
- "Reject" (nee "Request Changes") is now sticky. The review won't transition to "Accepted" until the reviewer clears their objection. In practice, I think it always worked like this anyway (without technical enforcement, users just followed this rule naturally, since disobeying this rule is kind of a dick move) so I don't expect this to change much. I think this rule is easier to understand than the old rule now, given the multi-reviewer status and blocking reviewers.
- "Blocking Reviewer" and "Reject" now prevent a revision from transitioning to "Accepted". When reviewers accept, resign, or are removed, we do a check to see if the reivsion has: at least one user reviewer who has accepted; zero rejects; and zero blocks. If all conditions are satisfied, we transition it to "accepted".
Practically, the primary net effect of this is just to make blocking reviews actually block.
This is pretty messy, but there's not much we can do about it until after T2222, since we have two completely separate editor pathways which are both responsible for adjusting status. Eventually, these can merge into a single sane editor which implements reasonable rules in reaonable ways. But that day is not today.
Test Plan: With three users and a project, made a bunch of accepts, rejects, resigns and reviewer removals. I think I probably covered most of the pathways? There are a lot of interactions here.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, wisutsak.jaisue.7
Maniphest Tasks: T1279
Differential Revision: https://secure.phabricator.com/D7245
Summary: Ref T1279. These reviewers don't actually create a logical block yet (that is, revisions still transition to "accepted" even in their presence), but this handles everything except that.
Test Plan: Added Herald rules and updated revisions; see screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1279
Differential Revision: https://secure.phabricator.com/D7244
Summary:
Ref T1279. With the new per-reviewer status, you can always accept or reject a revision.
This is primarily cosmetic/UI changes. In particular, you've always been able to reject a rejected revision, the UI just didn't show you an option.
Test Plan: Accepted accepted revisions; rejected rejected revisions. See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1279
Differential Revision: https://secure.phabricator.com/D7243
Summary: Ref T1279. If you accept a revision, also accept on behalf of all the projects you have authority to accept for.
Test Plan:
- Accepted a revision which I was a reviewer on, saw my own status and an authority project's status change to "Accepted".
- Accepted a revision which I was not a reviewer on, saw my own status be added (as "Accepted") and the project's status update.
Also, see screenshot.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, wisutsak.jaisue.7
Maniphest Tasks: T1279
Differential Revision: https://secure.phabricator.com/D7242
Summary:
Ref T1279. We currently determine reviewers at display time, but this is bad for several reasons:
- It puts queries very close to the display layer.
- We have to query for each revision if we want to figure out authority for several.
- We need to figure it out in several places, so we'll end up with copies of this logic.
- The logic isn't trivial (exceptions for the viewer, exceptions to that rule for install configuration).
- We already do this "figure it out when we need it" stuff in Diffusion for audits and it's really bad: we have half-working copies of the logic spread all over the place.
Instead, put it in the Query. Callers query for it and get the data attached to the reviewer objects.
Test Plan:
- Looked at some revisions, verified the correct lines were highlighted.
- Looked at a revision I created and verified that projects I was a member of were not highlighted.
- With self-accept enabled, these //are// highlighted.
- Looked at a revision I did not create and verified that projects I was a member of were highlighted.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1279
Differential Revision: https://secure.phabricator.com/D7241
Summary: Ref T603. Fixes T3921. Tightens up policy controls for file/object relationships in existing applications.
Test Plan:
- Uploaded new project image, verified it got an edge to the project.
- Uploaded new profile image, verified it got an edge to me.
- Uploaded new macro image, verified it got an edge to the macro.
- Uploaded new paste via web UI and conduit, verified it got attached.
- Replaced, added images to a mock, verified they got edges.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3921, T603
Differential Revision: https://secure.phabricator.com/D7254
Summary:
Ref T603. Move toward stamping out all the Project / ProjectProfile query irregularities with respect to policies.
- Fixes a bug with Asana publishing when the remote task is deleted.
- Fixes an issue with Herald commit rules.
Test Plan:
- Viewed projects;
- edited projects;
- added and removed members from projects;
- republished Asana-bridged feed stories about commits.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7251
Summary:
Ref T1279. This allows installs to implement two different flavors of project review. They can either implement this rule:
When:
[ ... ] [ ... ]
Take Action:
[ Add blockign reviewers ] [ Security ]
...which means "every revision matching X needs to be signed off by someone else on the Security team, //even if the author is on that team//". The alternative is to implement this rule:
When:
[ Author's projects ] [ do not include ] [ Security ]
[ ... ] [ ... ]
Take Action:
[ Add blocking reviewers ] [ Security ]
...which means that people on the Security team don't need a separate signoff from someone else on the team.
I think this weaker version maps to some of what, e.g., Google does (you need to be reviewed by someone with "readability" in a language, but if you have it that's good enough), but I could imagine cases like "Security" wanting to prevent self-review from satisfying the requirement.
@zeeg, not sure which of these use cases is relevant here, but either one should work after this.
Test Plan: Created rules with this field, verified it populated properly in the transcript.
Reviewers: btrahan
Reviewed By: btrahan
CC: zeeg, aran
Maniphest Tasks: T1279
Differential Revision: https://secure.phabricator.com/D7238
Summary: Ref T1279. No logical changes, but cosmetically highlight stuff you have authority for, like we do in Diffusion.
Test Plan: See screenshot.
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1279
Differential Revision: https://secure.phabricator.com/D7237
Summary:
Ref T1279. Although I think this is a bad idea in general (we once supported it, removed it, and seemed better off for it) users expect it to exist and want it to be available. Give them enough rope to shoot themselves in the foot.
I will probably write some lengthy treatise on how you shouldn't use this rule later.
Implementation is straightforward because Differential previously supported this rule.
This rule can also be used to add project reviewers.
Test Plan: Made some "add reviewers" rules, created revisions, saw reviewers trigger.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1279
Differential Revision: https://secure.phabricator.com/D7235
Summary: Ref T1279. Show separate sections for "Reviewers" and "Project Reviewers" (Differential) and for "Auditors" and "Package/Project Auditors" (Diffusion/Audit).
Test Plan:
- Looked at a commit. Saw separation.
- Looked at a revision. Saw separation.
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1279
Differential Revision: https://secure.phabricator.com/D7233
Summary:
Ref T1279. Two changes to the search/query for Differential:
- "Reviewers" now accepts users and projects.
- "Responsible Users" now includes revisions where a project you are a member of is a reviewer.
Test Plan:
- Searched for project reviewers.
- Verified that the dashboard now shows reviews which I'm only part of via project membership.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1279
Differential Revision: https://secure.phabricator.com/D7231
Summary:
Ref T1279. No actual logical changes, but:
- You can now add projects as reviewers from the revision view typeahead ("Add Reviewers" action).
- You can now add projects as reviewers from the revision detail typeahead.
- You can now add projects as reviewers from the CLI (`#yoloswag`).
- Generated commit messages now list project reviewers (`Reviewers: #yoloswag`).
I'll separate projects from users in the "Reviewers" tables in the next revision.
Test Plan:
- Added projects as reviewers using the web UI and CLI.
- Used `arc amend --show --revision Dnnn` to generate commit messages.
- Viewed revision with project reviewers in web UI.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1279
Differential Revision: https://secure.phabricator.com/D7230
Summary: Ref T1279. Updates status to 'accepted' or 'commented' when the user takes those actions.
Test Plan:
- Commented on a revision, got a comment icon.
- Accepted a revision, got an accept icon.
- Commented again, icon stayed as "accept".
- Faked the "old diff" states.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T1279
Differential Revision: https://secure.phabricator.com/D7229
Summary:
Ref T1279. No logical changes, just updates the reviewer display style.
We currently keep track of only "requested changes".
Test Plan: See screenshot.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T1279
Differential Revision: https://secure.phabricator.com/D7228
Summary:
Ref T1279. @champo did a lot of this work already; we've been doing double writes for a long time.
Add "double reads" (reading the edge table as both the "relationship" table and as the "reviewer status" table), and migrate all the data.
I'm not bothering to try to recover old reviewer status (e.g., we could infer from transactions who accepted old revisions) because it wold be very complicated and doesn't seem too valuable.
Test Plan:
- Without doing the migration, used Differential. Verified that reads and writes worked. Most of the data was there anyway since we've been double-writing.
- Performed the migration. Verified that everything was still unchanged.
- Dropped the edge table, verified all reviweer data vanished.
- Migrated again, verified the reviewer stuff was restored.
- Did various cc/reviewer/subscriber queries, got consistent results.
Reviewers: btrahan
Reviewed By: btrahan
CC: champo, aran
Maniphest Tasks: T1279
Differential Revision: https://secure.phabricator.com/D7227
Summary:
Ref T603. This closes the other major policy loophole in Herald, which was that you could write a rule like:
When [Always], [Add me to CC]
...and end up getting email about everything. These rules are now enforced:
- For a //personal// rule to trigger, you must be able to see the object, and you must be able to use the application the object exists in.
- In contrast, //global// rules will //always// trigger.
Also fixes some small bugs:
- Policy control access to thumbnails was overly restrictive.
- The Pholio and Maniphest Herald rules applied only the //last// "Add CC" or "Add Project" rules, since each rule overwrote previous rules.
Test Plan:
- Created "always cc me" herald and maniphest rules with a normal user.
- Created task with "user" visibility, saw CC.
- Created task with "no one" visibility, saw no CC and error message in transcript ("user can't see the object").
- Restricted Maniphest to administrators and created a task with "user" visibility. Same deal.
- Created "user" and "no one" mocks and saw CC and no CC, respectively.
- Thumbnail in Pholio worked properly.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7224
Summary:
Used `DifferentialRevisionQuery` with the relevant `need*()` calls in the test controller.
And started assuming the revision has reviewers and CC phids in `HeraldDifferentialRevisionAdapter`.
Test Plan:
Added herald rules that use revisions (one for revisions another for commit) and reviewers.
Created, accepted and landed a revision that matched the rules and checked all rules were applied.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1279
Differential Revision: https://secure.phabricator.com/D6468
Conflicts:
src/applications/herald/adapter/HeraldCommitAdapter.php
src/applications/herald/adapter/HeraldDifferentialRevisionAdapter.php
src/applications/herald/controller/HeraldTestConsoleController.php
Summary:
maniphest tasks were fataling with priority 0 before making sure to add the return null if new object trick to the maniphest pro editor.
pholio had a problem where if you had no jpegs you were walking off array_rand. tighten the math and then just return a built-in if no uploaded user images could be found. Fixes T3889.
Test Plan: bin/lipsum generate for a few minutes and no errors
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, aran
Maniphest Tasks: T3889
Differential Revision: https://secure.phabricator.com/D7222
Summary:
Ref T603. Herald transcripts potentially leak a bunch of content (task text, revision/commit content). Don't let users see them if they can't see the actual objects.
This is a little messy but ends up mostly reasonable-ish.
Test Plan:
- Verified that transcripts for objects I couldn't see no longer appear in the list, and reject access.
- Verified that transcripts for objects in applications I can't see reject access, albeit less gracefully.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7221
Summary:
- Use the box view in the test console.
- Let the test console load tasks and mocks. We should move this to the adapters (`canAdaptObject($object)` or something).
- Fix a minor issue with "Always": hiding the whole cell could make the table layout weird in Safari, at least. Just hide the select instead.
Test Plan:
- Used test console on task.
- Used test console on mock.
- Created (silly) rule with "Always" and also some other conditions.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7220
Summary: Adds an ObjectBox to Phabricator Registration
Test Plan: check logged out page for new header.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D7223
Summary:
Ref T603. Herald is a bit of a policy minefield right now, although I think pretty much everything has straightforward solutions. This change:
- Introduces "create" and "create global" permisions for Herald.
- Maybe "create" is sort of redundant since there's no reason to have access to the application if not creating rules, but I think this won't be the case for most applications, so having an explicit "create" permission is more consistent.
- Add some application policy helper functions.
- Improve rendering a bit -- I think we probably need to build some `PolicyType` class, similar to `PHIDType`, to really get this right.
- Don't let users who can't use application X create Herald rules for application X.
- Remove Maniphest/Pholio rules when those applications are not installed.
Test Plan:
- Restricted access to Maniphest and uninstalled Pholio.
- Verified Pholio rules no longer appear for anyone.
- Verified Maniphest ruls no longer appear for restricted users.
- Verified users without CREATE_GLOBAL can not create global ruls.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7219
Summary: Ref T603. This could be a nicer UX, but limit the amount of foot-shooting that users can possibly do. You can still manage if you're really tricky ("Members of project X", then leave the project) but this should make it hard to make a mistake. It seems very unlikely any user ever intends to lock themselves out of an application.
Test Plan: Set an application's view policy to permissive ("Administrators") and nonpermissive ("No One") values. The former were accepted, the latter rejected.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7218
Summary: Right now emails don't include bookmark info (wasn't added in D2897). Lets include it so it's consistent with the web UI.
Test Plan: Inspected code, made sure it matched web UI code. Verified that web UI with these changes was consistent with rendering before refactoring.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D7215
Summary:
Does what it says on the label. We already had 'Any changed file content', now we have 'Any added file content' and 'Any removed file content'.
- There is a bit of copied/pasted code here: I'm open to suggestions on how to refactor it so it's less redundant.
- The wording seems a little awkward, and as @epriestley mentioned in T3829, moved code will be detected less than ideally.
Test Plan: Created Herald Rules, verified via dry run that they were triggered in appropriate situations.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, aran
Maniphest Tasks: T3829
Differential Revision: https://secure.phabricator.com/D7214
Summary:
Ref T603. I had to partially revert this earlier because it accidentally blocked access to Conduit and File data for installs without "policy.allow-public", since the applications are available to "all users" but some endpoints actually need to be available even when not logged in.
This readjusts the gating in the controller to properly apply application visibility restrictions, and then adds a giant pile of unit test coverage to make sure it sticks and all the weird cases are covered.
Test Plan:
- Added and executed unit tests.
- Executed most of the tests manually, by using logged in / admin / public / disabled users.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7211
Summary:
Fixes T1461.
Adds
- FIELD_ALWAYS - now you could add this to a content type to always get notified
- FIELD_REPOSITORY_AUTOCLOSE_BRANCH - solves T1461
- CONDITION_UNCONDITIONALLY - used by these two fields to not show any value for the user to select
Test Plan: made a herald rule where diffs on autoclose branches would get flagged blue. made a diff on an autoclose branch and committed it. commit was flagged!
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, aran
Maniphest Tasks: T1461
Differential Revision: https://secure.phabricator.com/D7210
Summary:
In most cases this just makes the URIs more consistent, but it's funky/breakish for SVN repositories which are only partially tracked.
See also T3915, and IRC.
Test Plan:
- Browsed some repositories, verified URIs generated as expected, with trailing slashes for directories.
- Verified nothing goofy happened in the extremes (like double slashes on the first crumb).
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7209
Summary: Ref T603. If you get in trouble, `bin/policy unlock PHID-APPS-PhabricatorApplicationDifferential` and such can get you out now.
Test Plan: Unlocked an application.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7206
Summary:
Ref T603. Enables:
- Application policies can be edited.
- Applications can define custom policies (this will be used for setting defaults, like "what is the default visibiltiy of new tasks", and meta-policies, like "who can create a task?").
Test Plan: Edited application policies. A future diff does more with custom policies.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7205
Summary:
Ref T603. Broadly, this allows you to implement a policy like "Only users in Engineering can use Differential."
This isn't complete, and there will be a long tail of special cases to deal with. Some examples:
- If you can't use Differential, should you still be able to attach/detach revisions from tasks?
- You currently will be able to.
- This actually seems pretty reasonable.
- But in other cases it might not be: the "send user a message" action should probably require access to Conpherence.
- If you can't use Differential, should you still be able to see feed stories about it?
- You currently will be able to, if you can see the revisions.
- This seems not-so-reasonable and we should probably lock it down.
- If you can't use Differential, can users CC you on revisions?
- Currently, they can, and you can't do anything about it.
- Probably they shouldn't be able to? This seems challenging to explain in the UI.
- If you can't use Differential, can you write a Herald rule against it?
- You currently will be able to.
- Seems like you obviously shouldn't be able to.
- I think this is a general issue right now (you can still write Differential herald rules even if you uninstall the application, I believe).
There are probably a few more things I haven't thought of. However, there are a finite number of these things and I suspect there aren't //too/ many more than this -- I can't come up with like 100 of them, and half of the ones above have easy fixes.
Despite the rough edges, I think this accomplishes 95% of what installs expect from it.
Test Plan: Restricted Differential and saw it vanish from the home page.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7203
Summary:
I'm just going to store application policy settings (like view/edit policy, and default policies for content) in config, because:
1) We'll need access to it on every page, and Config is "free" since we already pull it.
2) Building separate storage and transactions seems like overkill, we get less-nice but pretty-reasonable transactions for free with config.
3) We could easily move it later if this is a bad call.
Also fix some formatting.
Test Plan: See future revisions.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7202
Summary: Make the application query a little more flexible, and formalize the PHID type.
Test Plan: See next diffs.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7201
Test Plan: Confirm the API returns a single flat result with a unified git diff.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, aran, charles
Differential Revision: https://secure.phabricator.com/D7199
Test Plan:
Enable inline patches:
```
bin/config set metamta.differential.patch-format 'unified'
bin/config set metamta.differential.inline-patches 100000000
```
Create a new diff and confirm it renders correctly via email.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D7198
Summary: Cleans up jump nav so it doesn't hard code a bunch of application behaviors. It still hard-codes a few, but few//er//?
Test Plan: Jumped to stuff like `D12`, `d`, `@dog`, `p admins only`, etc.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7196
Summary: Ref T603. This didn't impact policies anyway, but using PhabricatorObjectQuery is far simpler and more general.
Test Plan: Used "Attach" dialog to find mocks, tasks, and revisions by "Dxx", "Mxx", etc.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7195
Summary: I removed the only callsite in D7179, but forgot to remove this code.
Test Plan: Grepped for callsites.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7194
Summary: Ref T603. Make this rule properly policy-aware, and extend from `PhabricatorRemarkupRuleObject`.
Test Plan:
- Embedded an image, tested all options (name, link, float, layout, size).
- Used lightbox to view several images.
- Embedded a text file, tested all options (name).
- Embedded audio, tested all options (loop, autoplay).
- Attached a file via comment to a task, verified edge was created.
- Attached a file via comment to a conpherence, verified edge was created.
- Viewed old files, verified remarkup version bump rendered them correctly.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7192
Summary: Ref T603. When a user comments on an object with an embedded file, write an "attached" edge.
Test Plan: Made a comment on a task with an embedded file, verified the edge was written in Files.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7191
Summary: Ref T603. We might need a fine-grained CLI tool later on, but here's a bat we can bludgeon things with.
Test Plan:
- Ran `bin/policy unlock D12` (adjusted policies).
- Ran `bin/policy unlock rPca85c457ebcb` (got "not mutable" stuff).
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7189
Summary:
I use color to convey meaning like "good resource to keep handy for a bit on new way of doing things" or "snipe this task". Now the list can be grouped by these colors.
Note I do this in PHP 'cuz color isn't part of any index AFAIK and pragmatically speaking this dataset should be tiny in the context of "user flags".
Ref T1809
Test Plan: selected group by color and observed the flags were indeed grouped by color
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, aran
Maniphest Tasks: T1809
Differential Revision: https://secure.phabricator.com/D7188
Summary: Depends on D7163. This adds a "Stop Tracking" link to the right-hand side of ongoing entries in the Phrequent search view. It allows users to stop tracking items without first navigating to the item itself.
Test Plan: Started tracking and item and then clicked the "Stop Tracking" link in Phrequent.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, aran
Maniphest Tasks: T3870
Differential Revision: https://secure.phabricator.com/D7164
Summary:
This updates Phrequent to use new the search infrastructure. Now it looks like:
{F60141}
I've also added the policy infrastructure stubs, but it's probably not even close to being right in terms of enforcing policies (in particular being able to see time tracked against objects the user wouldn't normally be able to see).
At some point I'd like to be able to filter on the objects that the time is tracked against, but I don't believe there's a tokenizer / readahead control that allows you to type any kind of object.
Test Plan: Clicked around the new interface, created some custom queries and saved them.
Reviewers: epriestley
CC: Korvin, aran
Maniphest Tasks: T3870
Differential Revision: https://secure.phabricator.com/D7163
Summary:
Ref T3903. Ref T603. We currently overreact to invalid policies. Instead:
- For non-omnipotent users, just reject the viewer.
- For omnipotent users, we already shortcircuit and permit the viewer.
- Formalize and add test coverage for these behaviors.
Also clean up some strings.
The practical effect of this is that setting an object to an invalid policy (either intentionally or accidentally) doesn't break callers who are querying it.
Test Plan:
- Created a Legalpad document and set view policy to "asldkfnaslkdfna".
- Verified this policy behaved as though it were "no one".
- Added, executed unit tests.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603, T3903
Differential Revision: https://secure.phabricator.com/D7185
Summary:
Currently, if you attach a revision to a task and the revision has a title with quotes or angle brackets in it, they are over-escaped in the email.
Instead, don't do that.
Test Plan: Attached `"QUOTES" MATH: 1 < 2` to a task, got a reasonable looking email.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D7186
Summary:
Ref T603. Principally, I want to implement the rule "when you upload a file to an object, users must be able to see the object in order to see the file", since I think this is strongly in line with user expectation. For example, if you attach a file to a Conpherence, it should only be visible to members of that thread.
This adds storage for policies, but doesn't do anything interesting with it yet.
Test Plan: Ran `bin/storage upgrade`.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7175
Summary:
Ref T603. This uses the existing edges (from Conpherence) to record that a file is attached to an object, and uses those edges to create a policy exception: if you can view an attached object, you can view a file.
I'm going to combine this with restrictive defaults to satisfy the other half of the equation (that files you attach to a conpherence usually shouldn't be public by default).
Test Plan:
- Loaded `/files/`.
- Uploaded a file to a Conpherence, looked at it in Files, saw the attachment.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7182
Summary:
- "revision" is misspelled.
- Remove an unused variable.
Test Plan: Used API console to call method.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D7184
Summary: See D7162. This was like 99% my fault. Just provide a header; the new ones look pretty reasonable.
Test Plan: Viewed Diffusion change view, no exception.
Reviewers: vrana, chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D7183
Summary: Ref T603. This has some custom logic which ObjectQuery can now perform more simply and more correctly.
Test Plan: Ran `bin/files purge F1`, `bin/files purge D1`, `bin/files purge --all`.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7180
Summary: Ref T603. Clean these up and move them to a single place.
Test Plan:
- Downloaded a raw diff.
- Enabled "attach diffs", created a revision, got an email with a diff.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7179
Summary: Ref T603. Swaps out most `PhabricatorFile` loads for `PhabricatorFileQuery`.
Test Plan:
- Viewed Differential changesets.
- Used `file.info`.
- Used `file.download`.
- Viewed a file.
- Deleted a file.
- Used `/Fnnnn` to access a file.
- Uploaded an image, verified a thumbnail generated.
- Created and edited a macro.
- Added a meme.
- Did old-school attach-a-file-to-a-task.
- Viewed a paste.
- Viewed a mock.
- Embedded a mock.
- Profiled a page.
- Parsed a commit with image files linked to a revision with image files.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7178
Summary:
Fixes T3894. The "Log Out" icon has moved away from its rightmost position in the menubar.
In rP2e5ac12, I added a "Policy" application. This was the root cause.
The reordering logic (below) is slightly wrong. The `array_select_keys()` call is actually using the //strings// (like "Admnistration") to select the groups, not the correct constants (like "admin"). Use the constants instead and get the expected group ordering.
Test Plan: Loaded page, "Log Out" is in the rightmost position.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T3894
Differential Revision: https://secure.phabricator.com/D7177
Summary:
Three changes here.
- Add `setActionList()`, and use that to set the action list.
- Add `setPropertyList()`, and use that to set the property list.
These will let us add some apropriate CSS so we can fix the border issue, and get rid of a bunch of goofy `.x + .y` selectors.
- Replace `addContent()` with `appendChild()`.
This is just a consistency thing; `AphrontView` already provides `appendChild()`, and `addContent()` did the same thing.
Test Plan:
- Viewed "All Config".
- Viewed a countdown.
- Viewed a revision (add comment, change list, table of contents, comment, local commits, open revisions affecting these files, update history).
- Viewed Diffusion (browse, change, history, repository, lint).
- Viewed Drydock (resource, lease).
- Viewed Files.
- Viewed Herald.
- Viewed Legalpad.
- Viewed macro (edit, edit audio, view).
- Viewed Maniphest.
- Viewed Applications.
- Viewed Paste.
- Viewed People.
- Viewed Phulux.
- Viewed Pholio.
- Viewed Phame (blog, post).
- Viewed Phortune (account, product).
- Viewed Ponder (questions, answers, comments).
- Viewed Releeph.
- Viewed Projects.
- Viewed Slowvote.
NOTE: Images in Files aren't on a black background anymore -- I assume that's on purpose?
NOTE: Some jankiness in Phortune, I'll clean that up when I get back to it. Not related to this diff.
Reviewers: chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D7174
Summary: Fixes 2x white icons, adds 'user' and 'project' icons.
Test Plan: tested new states in Maniphest
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D7176
Summary:
Ref T603. I want to provide at least a basic CLI tool for fixing policy problems, since there are various ways users can lock themselves out of objects right now. Although I imagine we'll solve most of them in the application eventually, having a workaround in the meantime will probably make support a lot easier.
This implements `bin/policy show <object>`, which shows an object's policy settings. In a future diff, I'll implement something like `bin/policy set --capability view --policy users <object>`, although maybe just `bin/policy unlock <object>` (which sets view and edit to "all users") would be better for now. Whichever way we go, it will be some blanket answer to people showing up in IRC having locked themselves out of objects which unblocks them while we work on preventing the issue in the first place.
Test Plan: See screenshot.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7171
Summary: Missed this case in my sandbox
Test Plan: Reload a test diff
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D7168
Summary: This adds the 'PHUIObjectBox' to nearly every place that should get it. I need to comb through Diffusion a little more. I've left Differential mostly alone, but may decide to do it anyways this weekend. I'm sure I missed something else, but these are easy enough to update.
Test Plan: tested each new layout.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D7162
Summary:
Fixes T3887. Two issues:
- Macros were generating entirely before the render cache, so audio macros worked fine in previews and the first time the cache was populated, but not afterward.
- Instead, parse them before the cache but drop them in after the cache. Clean up all the file querying, too. This makes cached remarkup generate the correct audio beahviors.
- Safari sends an HTTP request with a "Range" header, and expects a "206 Partial Content" response. If we don't give it one, it sometimes has trouble figuring out how long a piece of audio is (mostly for longer clips? Or mostly for MP3s?). I'm not exactly sure what triggers it. The net effect is that "loop" does not work when Safari gets confused. While looping a short "quack.wav" worked fine, longer MP3s didn't loop.
- Supporting "Range" and "206 Partial Content", which is straightforward, fixes this problem.
Test Plan:
- Viewed a page with lots of different cached audio macros and lots of different uncached preview audio macros, they all rendered correctly and played audio.
- Viewed a macro with a long MP3 audio loop in Safari. Verified it looped after it completed. Used Charles to check that the server received and responded to the "Range" header correctly.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3887
Differential Revision: https://secure.phabricator.com/D7166
Summary: Fixes T3883. This is already supported in the query, expose it in the UI.
Test Plan: Ran some queries with and without subscribers.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3883
Differential Revision: https://secure.phabricator.com/D7161
Summary:
Fixes T3887. Basically:
- Macros with audio get passed to the `audio-source` behavior.
- This keeps track of where they are relative to the viewport as the user scrolls.
- When the user scrolls a "once" macro into view, and it reaches roughly the middle of the screen, we play the sound.
- When the user scrolls near a "loop" macro, we start playing the sound at low volume and increase the volume as the user scrolls.
This feels pretty good on both counts.
Test Plan: Tested in Safari, Chrome, and Firefox. FF seems a bit less responsive and doesn't support MP3, but it was fairly nice in Chrome/Safari.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3887
Differential Revision: https://secure.phabricator.com/D7160
Summary: Ref T3887. Implements storage and editors, but not the actual audio part.
Test Plan: Edited audio, audio behaviors of macros. Transactions and email looked good. Hit error cases.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3887
Differential Revision: https://secure.phabricator.com/D7159
Summary: we were bad at displaying phid-based values nicely. Now we are good at it.
Test Plan: made a herald rule where if the author was a or b, the task should be assigned to c and have projects x, y, z added to it. this displayed nicely.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D7158
Summary: Ref T3887. Similar to how we render images with `<img />`, render audio with `<audio />` if possible.
Test Plan: See screenshots.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3887
Differential Revision: https://secure.phabricator.com/D7156
Summary: Ref T603. We have a real policy app now, so put the config options there. Revise the description of the public policy switch to make it clear that enabling it immediately opens up the user directory and various other interfaces.
Test Plan: Viewed/edited config setting.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7154
Summary:
Ref T603. If an install allows acccess by logged-out users, show search.
(A lot of the search typeahead results, although visible to the user, don't lead anywhere interesting right now. We can clean this up in the future.)
Test Plan: As a logged out user, searched for some stuff. It worked. Also, I only found results I could see, which is quite heartening.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7153
Summary:
Ref T603. I got most of this earlier, but finish it up.
- Make a couple of controllers public; pretty much everything in Diffusion has implicit policy checks as a result of building a `DiffusionRequest`.
- Add an "Edit" capability to commits.
- Swap out the comment thing for commits.
- Disable actions if the user can't take them.
Test Plan: Viewed a bunch of interfaces while logged out, got appropriate results or roadblocks.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7152
Summary:
Ref T603. This could probably use a little more polish, but improve the quality of policy error messages.
- Provide as much detail as possible.
- Fix all the strings for i18n.
- Explain special rules to the user.
- Allow indirect policy filters to raise policy exceptions instead of 404s.
Test Plan: See screenshots.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7151
Summary:
Ref T603. Adds clarifying text which expands on policies and explains exceptions and rules. The goal is to provide an easy way for users to learn about special policy rules, like "task owners can always see a task".
This presentation might be a little aggressive. That's probably OK as we introduce policies, but something a little more tempered might be better down the road.
Test Plan: See screenshot.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7150
Summary:
Ref T603. Make Differential behaviors for logged-out and underprivleged users more similar to other apps.
I'm going to drop this "anonymous access" thing at some point, but `reviews.fb.net` actually looks like it's running semi-modern code, so leave it alive until we have a more compelling replacement in the upstream.
Test Plan: As a logged out user, browsed Differential and clicked things and such.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7148
Summary: right now you get sent an email with a broken link 'cuz the email is plain text if you edit something with the edit policy being a project.
Test Plan: edited a legalpad document edit policy repeatedly to various projects. observed good emails via bin/mail debug tool. object page still looked good too
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D7149
Summary:
Ref T603. When a diff is attached to a revision, try to guess the repository if possible. In cases where we succeed, this automatically gives us intuitive policy behavior (i.e., you can see a revision if you can see the repository the change is against).
I pulled this into a funky little "Lookup" class for two reasons:
- It's used in two places;
- I anticipate that we might need to add some sort of `explainWhy()` method if users find the heuristics confusing.
Test Plan: Created and updated revisions, saw them pick up the correct repository association. Ran Herald dry run against associable and nonassociable revisions, saw correct values populate.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7147
Summary: This ends up living in HeraldAdapter even though its "task only" stuff. Reason being There are 4 or 5 functions that have little hooks; see diff. Ref T1638.
Test Plan: made a rule to assign tasks to me if made on web - great success. made a rule to assign tasks to other guy and add a project if title contained "foobar" - great success, including some confusion as ther two herald rules fought each other for task ownership.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, aran
Maniphest Tasks: T1638
Differential Revision: https://secure.phabricator.com/D7146
Summary: ...and deploy on Maniphest. Ref T1638.
Test Plan: created a herald rule to be cc'd for tasks created via web. made a task via web and another via email and was cc'd appropriately. edited the herald to be cc'd for tasks created via not web. made 2 tasks again and got cc'd appropriately
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, aran
Maniphest Tasks: T1638
Differential Revision: https://secure.phabricator.com/D7145
Summary: This isn't too useful most of the time since we don't automatically populate this data yet, but works fine.
Test Plan: See screenshot.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7144
Summary: Ref T603. I think T2222 is fraught with peril so I'm not going to try to sequence it ahead of T603 for Differential. Provide access to policy controls in Differential's edit view.
Test Plan: See screenshot.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7142
Summary: Adds some padding to the right
Test Plan: Looked at a diff
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D7143
Summary:
Ref T2217. This partially retreads the ground from D7115.
- We're rendering silly transactions about descriptions when creating tasks. Hide those.
- Move the "created" transaction back to status. This fixes two things that are otherwise more of a mess than I'd anticipated:
- It fixes Reports without making a mess (see <https://github.com/facebook/phabricator/issues/395>).
- It renders old transactions properly (i.e., "created" instead of "reopened" for tasks older than the migration).
- Be explicit about action strength, so emails always say the most important thing in the subject.
Test Plan: Created and edited tasks, looked at resulting transactions, saw a cleaner transaction record.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2217
Differential Revision: https://secure.phabricator.com/D7141
Summary: Ref T603. Makes the majority of reads policy aware (and pretty much all the important ones).
Test Plan:
- Created a comment with `differential.createcomment`.
- Created a new revision with `arc diff` in order to exercise `differential.creatediff`.
- Created an inline comment with `differential.createinline`.
- Added a comment to a revision.
- Edited an inline comment.
- Edited a revision.
- Wrote "Depends on ..." in a summary, saved, verified link was created.
- Browsed a file in Diffusion.
- Got past the code I changed in the Releeph request thing.
- Edited a Releeph request.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7136
Summary: Ref T603. Moves policy information from a custom field to the header for revisions.
Test Plan: Looked at a revision.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7135
Summary:
Ref T603. Read policies out of policy columns.
When a revision is associated with a repository (which is currently never), require view access on the repository to see the revision (or, require the viewer to be the owner). This is a blanket "do the right thing" rule which should make Differential's default policies align with user expectations.
Future diffs will populate the `repositoryPHID` when a revision is created.
Test Plan: Tooled around Differential. None of this stuff does anything yet, so nothing very exciting happened.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7134
Summary: Ref T603. Paves the way for policy controls.
Test Plan: Ran storage upgrade, bumbled around in Differential.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7133
Summary: Ref T603. Move to real Query classes.
Test Plan:
- Ran `phd debug pull X` (where `X` does not match a repository).
- Ran `phd debug pull Y` (where `Y` does match a repository).
- Ran `phd debug pull`.
- Ran `repository pull`.
- Ran `repository pull X`.
- Ran `repository pull Y`.
- Ran `repository discover`.
- Ran `repository delete`.
- Ran `grep`.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7137
Summary: Ref T603. This swaps almost all queries against the repository table over to be policy aware.
Test Plan:
- Made an audit comment on a commit.
- Ran `save_lint.php`.
- Looked up a commit with `diffusion.getcommits`.
- Looked up lint messages with `diffusion.getlintmessages`.
- Clicked an external/submodule in Diffusion.
- Viewed main lint and repository lint in Diffusion.
- Completed and validated Owners paths in Owners.
- Executed dry runs via Herald.
- Queried for package owners with `owners.query`.
- Viewed Owners package.
- Edited Owners package.
- Viewed Owners package list.
- Executed `repository.query`.
- Viewed "Repository" tool repository list.
- Edited Arcanist project.
- Hit "Delete" on repository (this just tells you to use the CLI).
- Created a repository.
- Edited a repository.
- Ran `bin/repository list`.
- Ran `bin/search index rGTESTff45d13dffcfb3ea85b03aac8cc36251cacdf01c`
- Pushed and parsed a commit.
- Skipped all the Drydock stuff, as it it's hard to test and isn't normally reachable.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7132
Summary:
We currently try to send Maniphest email "To" the owner and actor, but for unassigned tasks there is no owner.
Just filter the PHIDs in the parent, since it's reasonable for subclasses to be liberal about construction here.
Test Plan: Commented on an unassigned task, got an email without a bogus "To".
Reviewers: btrahan, asherkin
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7129
Summary:
Ref T603. Basically:
- Hide "Reports".
- Hide "batch edit" and "export to excel".
- Hide reprioritization controls.
- I left the edit controls, they show a "login to continue" dialog when hit.
- Allow tokenizer results to fill for public users.
- Fix a bug where membership in projects was computed incorrectly in certain cases.
- Add a unit test covering the project membership bug.
Test Plan: Viewed /maniphest/ when logged out, and while logged in.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7126
Summary:
Ref T603. Disable things the user can't use, allow logged-out users to get a reasonable version of the page.
Also allow logged-out users to view edit history of comments if they're able to see the object.
Test Plan: Viewed Maniphest detail as a logged-out user, got a largely sensible page.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7124
Summary:
Ref T603. Adds policy controls to the task edit UI.
@chad, status + policy renders a little weird -- did I mess something up? See screenshot.
Test Plan: Edited policies, viewed a task.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7123
Summary:
Ref T603. Cleans up some obsolete stuff here:
- We no longer ever query by min/max priority (instead, `withPriorities(...)`).
- A parent class provides limit/offset.
- Result count is no longer reliable with policies. We could do "about X tasks" or something, but just drop it for now. There's only one remaining callsite anyway.
Test Plan:
- `grep`
- Viewed task list.
- Viewed a project page.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7121
Summary:
Ref T603. Make almost every task read policy-aware. Notable exceptions are:
- Edge editor -- this stuff is prescreened and should be moved to ApplicationTransactions eventually anyway.
- Search/attach stuff -- this stuff needs some general work. The actual list should be fine since you can't pull handles. There may be a very indirect hole here where you could attach an object you can't see (but do know the ID of) to an object you can see. Pretty fluff.
- The "Tasks" field in Differential will let you reference objects you can't see. Possibly this is desirable, in the case of commandeering revisions. Mostly, it was inconvenient to get a viewer (I think).
Test Plan:
- Called `maniphest.info`.
- Called `maniphest.update`.
- Batch edited tasks.
- Dragged and dropped tasks to change subpriority.
- Subscribed and unsubscribed from a task.
- Edited a task.
- Created a task.
- Created a task with a parent.
- Created a task with a template.
- Previewed a task update.
- Commented on a task.
- Added a dependency.
- Searched for "T33" in object search dialog.
- Created a branch "T33", ran `arc diff`, verified link.
- Pushed a commit with "Fixes T33", verified close.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7119
Summary:
Ref T2217. Use `getLinkName()` instead of `getName()` so that we get, e.g.,
alincoln attached a revision: D123 Chop some logs
...instead of:
alincoln attached a revision: D123
Test Plan: Attached stuff, looked at the email, saw full object name.
Reviewers: btrahan, asherkin
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2217
Differential Revision: https://secure.phabricator.com/D7127
Summary: adds padding to the maniphest status subheader
Test Plan: see padding in inspect element
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D7125
Summary:
standing on the shoulders of the badass work to move Maniphest to ApplicationTransactions, this diff implements a few methods and adds an adapter class.
For now, we can add cc and flag tasks. I figure see what people ask for? Ref T1368.
Test Plan: created herald rules for title and description text hits. made tasks and verified CC and flags worked.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, aran
Maniphest Tasks: T1368, T1638
Differential Revision: https://secure.phabricator.com/D7122
Summary: I'd like to reuse this for other content areas, renaming for now. This might be weird to keep setForm, but I can fix that later if we need.
Test Plan: reload a few forms in maniphest, projects, differential
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D7120
Summary: Ref T2217. These checks are no longer necessary, ApplicationTransactions handle them for us.
Test Plan:
- Made a no-effect edit, verified no new transactions showed up.
- Made real edits, saw them happen and leave transactions.
- Made an edit which just reorders CCs, saw it detected as no-effect.
- As above, with projects.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2217
Differential Revision: https://secure.phabricator.com/D7117
Summary:
Ref T2217. Fixes two issues:
# The "task created" email didn't include the task description, but should.
# We were treaging the "status" event as the "create", but that's kind of a mess. Treat the "title" event as the "create" instead. This makes initial emails say "[Created]".
Test Plan: Created some tasks, got better emails.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T2217
Differential Revision: https://secure.phabricator.com/D7115
Summary: These constants have moved to ManiphestTransaction. The other method only has one plausible callsite, just inline it.
Test Plan: Used Maniphest.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7113
Summary:
There may be times when we don't want lines in some embeded source
code to be highlighted on click, this adds that functionality.
Also use the functionalty in `PasteEmbedView`
Test Plan:
- View paste, make sure everything works.
- Embed paste in comment, make sure everything works apart from click hl
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, aran
Maniphest Tasks: T3881
Differential Revision: https://secure.phabricator.com/D7111
Summary: Name the token which was given in the feed story.
Test Plan: Gave/rescinded tokens. Looked at a feed story.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7110
Summary: Ref T2217. Render feed stories like "alincoln updated T123" instead of "alincoln updated this task.". Fix up some more translations.
Test Plan: Looked at feed, saw something a bit more reasonable.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2217
Differential Revision: https://secure.phabricator.com/D7108
Summary: TimelineView on Maniphest is often kind of hard to parse because related/simultaneous transactions aren't visually grouped. Allow grouping. I'm going to clean this up a little bit more.
Test Plan: See screenshot.
Reviewers: chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D7107
Summary: Ref T2217. Fixes T3865. Eventually we'll probably make more of this configurable, but for now shove custom fields down instead of sort of arbitrarily putting them in the middle.
Test Plan: Looked at a task with attached revisions and custom fields, saw custom fields last.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2217, T3865
Differential Revision: https://secure.phabricator.com/D7103
Summary:
PHP_INT_MAX is rejected by ElasticSearch since it's outside of the representable integer range (see: <https://gist.github.com/JustinTulloss/c4ac0e1c93d6d1e91744>).
Just use 10K, as matching more than 10K results probably isn't useful to anyone.
Test Plan: Confirmed this fixes the issue in IRC. Ran a fulltext search.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7097
Summary: Ref T2217. Fixes T3877. Improves more behaviors in the presence of "no effect" detection and new comment storage.
Test Plan: Added CCs, added existing CCs, implicitly added CCs via reassign, added CCs with comment.
Reviewers: btrahan, garoevans
Reviewed By: garoevans
CC: aran
Maniphest Tasks: T2217, T3877
Differential Revision: https://secure.phabricator.com/D7100
Summary: Ref T2217. Cleans up some of the "attached %d file(s)" stuff.
Test Plan: Generated some of these transactions and verified they render more naturally.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T2217
Differential Revision: https://secure.phabricator.com/D7096
Summary:
Ref T2217. Since we aren't actually using subscriptions yet, the "transactions have no effect" detection can trigger for `@mention`s of users who are already CC'd on a task.
Be more conservative about generating a CC transaction.
Test Plan: See screenshot.
Reviewers: btrahan, chad
Reviewed By: chad
CC: chad, aran
Maniphest Tasks: T2217
Differential Revision: https://secure.phabricator.com/D7095
Summary: Ref T2217. Cleans up the table names. Moves old data to `maniphest_transaction_legacy`. We'll drop that eventually once it's more clear that I didn't break the world.
Test Plan: Did reads/writes to/from these tables.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2217
Differential Revision: https://secure.phabricator.com/D7094
Summary: Ref T2217. Pro is the new standard.
Test Plan: Lots of `grep`, made a pile of Maniphest views/edits.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2217
Differential Revision: https://secure.phabricator.com/D7093
Summary: Ref T2217. The preview had the last callsite, nuke it.
Test Plan: Used preview. Grepped for `ManiphestTransaction(`, `ManiphestTransaction::`, `'ManiphestTransaction'`, `"ManiphestTransaction"`.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2217
Differential Revision: https://secure.phabricator.com/D7092
Summary:
`getArcanistProjectName()` has some logic which gets messy with the `self::ATTACHABLE` mechanism. This makes `differential.getdiff` and similar Conduit methods throw an exception when querying a diff which doesn't have a project. See <http://pastebin.com/Czzrd0Jz>.
Instead, unconditionally attach a project (possibly `null`) when loading diffs if they need projects.
Test Plan: Ran `differential.getdiff` against a `arc diff --raw` diff with no project, got a result instead of an exception.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, sttwister
Differential Revision: https://secure.phabricator.com/D7101
Summary: Adds status icons and colors to Maniphest and Differential. Also minor tweaks to them in hovercards. Probably some other stuff too.
Test Plan: Test many diff and task states.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D7098
Summary:
Ref T2217. Removes most of the code from ManiphestTransactionEditor.
- Provides mail tag support in ManiphestTransactionEditorPro.
- There was one more write (subscribe/unsubscribe button) that I'd missed; modernize that.
Test Plan:
- Clicked subscribe/unsubscribe.
- Made some edits, verified mail had appropriate mail tags.
Reviewers: btrahan, garoevans
Reviewed By: garoevans
CC: aran
Maniphest Tasks: T2217
Differential Revision: https://secure.phabricator.com/D7091
Summary: Ref T2217. This is essentially the last writer, should be able to start deleting code now.
Test Plan: Used "Edit Task" to make a bunch of task edits.
Reviewers: btrahan, garoevans
Reviewed By: garoevans
CC: aran
Maniphest Tasks: T2217
Differential Revision: https://secure.phabricator.com/D7090
Summary:
"Branch" really means "repository main screen, with some branch selected", so a branch isn't actually required since we can just take you to the default.
Fixes an issue where new crumbs would throw an exception in SVN repositories.
Test Plan: Browed an SVN repo.
Reviewers: btrahan, mbishopim3
Reviewed By: mbishopim3
CC: aran
Differential Revision: https://secure.phabricator.com/D7099
Summary: When loading the cursor repository, we need to load the most recent
commit too if we're paging by commit date. This fixes a fatal for installs
with more than 100 repositories.
Auditors: btrahan
Summary: Ref T2217. When you add comments (or use that interface to make updates), ship it through the new code.
Test Plan: Added comments, made other changes to Maniphest tasks.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2217
Differential Revision: https://secure.phabricator.com/D7088
Summary: Ref T2217. Ship these through the new stuff.
Test Plan: See screenshot.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2217
Differential Revision: https://secure.phabricator.com/D7087
Summary: Ref T2217. Mail writes go through the new code now.
Test Plan: Shipped a bunch of mail in with `./bin/mail`, got reasonable edits as a result.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2217
Differential Revision: https://secure.phabricator.com/D7086
Summary: Ref T2217. Nothing too surprising here. This transaction type is weird and should be replaced with the mainstream EDGE type at some point after things clear up more.
Test Plan: Attached and detached revisions and mocks.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2217
Differential Revision: https://secure.phabricator.com/D7085
Summary:
Ref T2217. Ship "Merge in Duplicates" through the new editor. The only notable thing here is `setContinueOnMissingFields()`.
The problem this solves is that if you add a custom field and mark it as required, all existing tasks are "invalid" since they don't have a value, and trying to edit them will raise an error like "Some Custom Field is required!". This is fine for normal edits via the UI, since the user can just select/provide a value, but surgical edits to specific fields should just ignore these errors. Add the ability to ignore these errors and use it on all the field-speific editors.
Test Plan: Merged duplicates, including "invalid" duplicates with missing fields.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2217
Differential Revision: https://secure.phabricator.com/D7084
Summary:
Ref T2217. Swaps batch edits to modern editor.
Also, fix some issues with required fields and viewers being required to render certain standard fields (notably, date).
Test Plan: Made various batch edits, verified they went through properly.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2217
Differential Revision: https://secure.phabricator.com/D7083
Summary:
Ref T2217. Drive reports out of the new table. Nothing too magical going on here.
Also fixes a bug with one of the links from reports.
Test Plan: Viewed reports.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2217
Differential Revision: https://secure.phabricator.com/D7081
Summary: Ref T2217. All the reads route through new code already, start swapping writes over. This is the simplest writer, used when the user drag-and-drops stuff on the task list.
Test Plan: Dragged and dropped stuff across priorities. Got a transaction and some email. Verified the email and transaction looked OK, threaded properly, etc.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2217
Differential Revision: https://secure.phabricator.com/D7080
Summary: Ref T2217. No remaining callsites. Also get rid of some methods on ManiphestTransaction that nothing calls anymore.
Test Plan: `grep`, looked at tasks.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2217
Differential Revision: https://secure.phabricator.com/D7079
Summary: Ref T2217. Nuke this legacy callsite.
Test Plan: Loaded a task, looked at it. Looked the same as before.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2217
Differential Revision: https://secure.phabricator.com/D7078
Summary: Ref T2217. These are mostly me making stuff up rather than some bird's-eye view of color and iconography across applications, yell if any of these seem off once this rolls out.
Test Plan:
- Looked at a bunch of transactions, saw reasonable looking colors and icons.
- Sent email, saw appropriate subject line actions.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T2217
Differential Revision: https://secure.phabricator.com/D7075
Summary: Ref T2217. Get rid of this rendering pathway's internals and move them to the modern stuff.
Test Plan: See screenshot.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2217
Differential Revision: https://secure.phabricator.com/D7072
Summary:
Ref T2217. This showed the text diff when you updated the description of a task, but is now obsolete.
Remove flags and methods related to rendering this pathway.
Test Plan: Clicked the fancy new "Show Details" instead.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2217
Differential Revision: https://secure.phabricator.com/D7071
Summary: Ref T2217. Route transaction rendering through modern code. This just affects the detail page. Some rough edges but nothing significant.
Test Plan: See screenshot.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2217
Differential Revision: https://secure.phabricator.com/D7070
Summary:
Ref T2217. Move this off `LegacyQuery` and on to the real deal.
The rest of this patch mostly just replaces some gymnastics to get accurate-ish timestamps for CCs/Owners with `time()`. The search feature where edge time is stored was never really used and isn't necessarily of much value -- most indexers don't bother computing it exactly, and possibly we should get rid of it entirely. If it surfaces in the product again at some point, it's easy enough to make the time data more accurate and reindex.
Test Plan: Ran `bin/search index T12`, etc.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2217
Differential Revision: https://secure.phabricator.com/D7069
Summary:
Ref T2217. This is the risky, hard part; everything after this should be smooth sailing. This is //mostly// clean, except:
- The old format would opportunistically combine a comment with some other transaction type if it could. We no longer do that, so:
- When migrating, "edit" + "comment" transactions need to be split in two.
- When editing now, we should no longer combine these transaction types.
- These changes are pretty straightforward and low-impact.
- This migration promotes "auxiliary field" data to the new CustomField/StandardField format, so that's not a straight migration either. The formats are very similar, though.
Broadly, this takes the same attack that the auth migration did: proxy all the code through to the new storage. `ManiphestTransaction` is now just an API on top of `ManiphestTransactionPro`, which is the new storage format. The two formats are very similar, so this was mostly a straight copy from one table to the other.
Test Plan:
- Without performing the migration, made a bunch of edits and comments on tasks and verified the new code works correctly.
- Droped the test data and performed the migration.
- Looked at the resulting data for obvious discrepancies.
- Looked at a bunch of tasks and their transaction history.
- Used Conduit to pull transaction data.
- Edited task description and clicked "View Details" on transaction.
- Used batch editor.
- Made a bunch more edits.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2217
Differential Revision: https://secure.phabricator.com/D7068
Summary:
Ref T2217. I'm going to do the fake-double-writes ("double reads"?) thing where we proxy the storage that worked pretty well for auth. That is:
- (Some more cleanup diffs next, maybe?)
- Move all the data to the new storage, and make `ManiphestTransaction` read and write by wrapping `ManiphestTransactionPro`.
- If nothing breaks, it's a straight shot to nuking ManiphestTransaction callsite by callsite.
I think Maniphest is way easier than Differential, because there are very few query sites and no inline comments.
Test Plan: `grep` to find callsites. Loaded task view, called Conduit.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, chad
Maniphest Tasks: T2217
Differential Revision: https://secure.phabricator.com/D7067
Summary: Ref T2217. Add the tables and comment class for the new stuff. Not used yet.
Test Plan: Ran storage upgrade, browsed Maniphest.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2217
Differential Revision: https://secure.phabricator.com/D7066
Summary:
This is a mostly-faithful modernization of the Diffusion lint interfaces. It:
- Makes them policy aware;
- removes the last callsites for old/dead code (crumbs, nav).
It's a little rough, but should be perfectly usable. At some point this should get another pass, but probably after we make it easier to populate the lint data.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, FacebookPOC
Differential Revision: https://secure.phabricator.com/D7065
Summary: Fixes T903. Knock out the side nav, make it policy-aware, other minor cleanup.
Test Plan: See below.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T903
Differential Revision: https://secure.phabricator.com/D7064
Summary:
- Kicks it out to full width.
- More useful header/crumbs/properties/actions (needs some more work).
- Works for public repositories.
- Fix a bug where the "rX" crumb would lose the branch you're on.
Test Plan: See screenshot.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7063
Summary: Get rid of remaining callsites for buildStandardPageResponse() and modernize the UIs.
Test Plan: Looked at branches, tags, and commit detail pages.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7062
Summary: Ref T603. Allows permitted users to set view and edit policies for repositories. So far the repository list, repository detail, repository edit, and browse interfaces respect these settings. Most other interfaces will respect stricter settings, but "Public" won't work. Lots of rough edges in the integration still. None of this makes policies any looser than they were already without explicit user intervention, so I just put a warning about it in the UI.
Test Plan: Set a repository to public and browsed it. Verified I could not access non-public repositories.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, davidressman
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7061
Summary: Ref T603. Make common repository queries (in Conduit and DiffusionRequest) policy-aware. These tend to get caugh by something else anyway, but tighten them up.
Test Plan: The conduit change already provided `user` everywhere. I verified that and browsed some pages.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7060
Summary:
Ref T603. See inlines for an explanation. The case where I hit this was loading the "Pending Differential Revisions" panel in Diffusion when logged out, after making a repository public.
What happens is that we load 10 revisions (say, D1 .. D10) but the user can't see any of them. We then try to load the next 10, but since the pagination is ordered by date modified, we need to base the next query on the modified date of the last thing we loaded (D10). However, since we use the viewer's policies to load that cursor object, it fails to load, and then we just issue the same query over and over again, loading D1 .. D10 until we run out of execution time.
Test Plan: Interface now loads correctly.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7059
Summary: Improves transaction rendering for custom fields and standard custom fields.
Test Plan: See screenshot.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7054
Summary:
- Add some TODO'd keys.
- Add policy fields.
Test Plan: Viewed repositories; created a new repository and verified it got the right default policy settings.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7056
Summary: See task
Test Plan:
Attempt to signup with recaptcha disabled.
Attempt to signup with recaptcha enabled with incorrect value.
Attempt to signup with recaptcha enabled with correct value.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, aran
Maniphest Tasks: T3832
Differential Revision: https://secure.phabricator.com/D7053
Summary: We currently render something kind of goofy; integrate these with the other actions.
Test Plan: Viewed `aphlict.swf`, some PNG in Diffusion.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7052
Summary:
We have this silly "view" preference which has a variety of silly values: "plain", "plainblame", "highlighted", and "blame", and then also "raw", which is magical. This is really just two flags: color on/off, and blame on/off (plus a separate mode for raw).
Express the code in terms of the flags and, e.g., get rid of the state transition tables we had before.
Test Plan: Viewed code in all four modes.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7046
Summary: This needs some more cleanup, but gets us a step closer to something reasonable.
Test Plan: See screenshot.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7043
Summary: Broadly, I'm trying to modernize these views and fix UI and at least mitigate mobile problems. See discussion.
Test Plan: See screenshots.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7042
Summary: Get thee modernized.
Test Plan: See screenshot.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D7040
Summary: Instead of rendering this in all callers, just pass the object into the header and let it figure out how to format it.
Test Plan: Looked at Legalpad, Paste, and Pholio.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D7039
Summary: Allows the user to query for repos by VCS type.
Test Plan: See screenshot.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7038
Summary: Gets rid of as much of this as possible. We'll batch handles and remarkup again some day, but after ApplicationTransactions.
Test Plan: Edited, viewed, and checked email for custom field edits.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7037
Summary: Ref T3794. Drop auxiliary field, use standard field.
Test Plan: Performed migration, field seemed to survive it intact. Edited and viewed tasks.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3794
Differential Revision: https://secure.phabricator.com/D7036
