Summary: Fixes T5579. Modern browsers aggressively autofill credentials, but at least Firefox still behaves slightly better with this flag. Hopefully other browsers will follow suit.
Test Plan: Browsed various interfaces, verifying that login interfaces allow autocomplete while non-login interfaces do not.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5579
Differential Revision: https://secure.phabricator.com/D10253
Summary:
Fixes T5509. Currently, existing sessions live on even if you change your password.
Over the course of the program, we've recieved a lot of HackerOne reports that sessions do not terminate when users change their passwords. I hold that this isn't a security vulnerability: users can explicitly manage sessions, and this is more general and more powerful than tying session termination to password resets. In particular, many installs do not use a password provider at all (and no researcher has reported this in a general, application-aware way that discusses multiple authentication providers).
That said, dealing with these false positives is vaguely time consuming, and the "expected" behavior isn't bad for users, so just align behavior with researcher expectations: when passwords are changed, providers are removed, or multi-factor authentication is added to an account, terminate all other active login sessions.
Test Plan:
- Using two browsers, established multiple login sessions.
- In one browser, changed account password. Saw session terminate and logout in the second browser.
- In one browser, removed an authentication provider. Saw session terminate and logout in the second browser.
- In one browser, added MFA. Saw session terminate and logout in the second browser.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5509
Differential Revision: https://secure.phabricator.com/D10135
Summary:
Ref T4398. This code hadn't been touched in a while and had a few crufty bits.
**One Time Resets**: Currently, password reset (and similar links) are valid for about 48 hours, but we always use one token to generate them (it's bound to the account). This isn't horrible, but it could be better, and it produces a lot of false positives on HackerOne.
Instead, use TemporaryTokens to make each link one-time only and good for no more than 24 hours.
**Coupling of Email Verification and One-Time Login**: Currently, one-time login links ("password reset links") are tightly bound to an email address, and using a link verifies that email address.
This is convenient for "Welcome" emails, so the user doesn't need to go through two rounds of checking email in order to login, then very their email, then actually get access to Phabricator.
However, for other types of these links (like those generated by `bin/auth recover`) there's no need to do any email verification.
Instead, make the email verification part optional, and use it on welcome links but not other types of links.
**Message Customization**: These links can come out of several workflows: welcome, password reset, username change, or `bin/auth recover`. Add a hint to the URI so the text on the page can be customized a bit to help users through the workflow.
**Reset Emails Going to Main Account Email**: Previously, we would send password reset email to the user's primary account email. However, since we verify email coming from reset links this isn't correct and could allow a user to verify an email without actually controlling it.
Since the user needs a real account in the first place this does not seem useful on its own, but might be a component in some other attack. The user might also no longer have access to their primary account, in which case this wouldn't be wrong, but would not be very useful.
Mitigate this in two ways:
- First, send to the actual email address the user entered, not the primary account email address.
- Second, don't let these links verify emails: they're just login links. This primarily makes it more difficult for an attacker to add someone else's email to their account, send them a reset link, get them to login and implicitly verify the email by not reading very carefully, and then figure out something interesting to do (there's currently no followup attack here, but allowing this does seem undesirable).
**Password Reset Without Old Password**: After a user logs in via email, we send them to the password settings panel (if passwords are enabled) with a code that lets them set a new password without knowing the old one.
Previously, this code was static and based on the email address. Instead, issue a one-time code.
**Jump Into Hisec**: Normally, when a user who has multi-factor auth on their account logs in, we prompt them for factors but don't put them in high security. You usually don't want to go do high-security stuff immediately after login, and it would be confusing and annoying if normal logins gave you a "YOU ARE IN HIGH SECURITY" alert bubble.
However, if we're taking you to the password reset screen, we //do// want to put the user in high security, since that screen requires high security. If we don't do this, the user gets two factor prompts in a row.
To accomplish this, we set a cookie when we know we're sending the user into a high security workflow. This cookie makes login finalization upgrade all the way from "partial" to "high security", instead of stopping halfway at "normal". This is safe because the user has just passed a factor check; the only reason we don't normally do this is to reduce annoyance.
**Some UI Cleanup**: Some of this was using really old UI. Modernize it a bit.
Test Plan:
- **One Time Resets**
- Used a reset link.
- Tried to reuse a reset link, got denied.
- Verified each link is different.
- **Coupling of Email Verification and One-Time Login**
- Verified that `bin/auth`, password reset, and username change links do not have an email verifying URI component.
- Tried to tack one on, got denied.
- Used the welcome email link to login + verify.
- Tried to mutate the URI to not verify, or verify something else: got denied.
- **Message Customization**
- Viewed messages on the different workflows. They seemed OK.
- **Reset Emails Going to Main Account Email**
- Sent password reset email to non-primary email.
- Received email at specified address.
- Verified it does not verify the address.
- **Password Reset Without Old Password**
- Reset password without knowledge of old one after email reset.
- Tried to do that without a key, got denied.
- Tried to reuse a key, got denied.
- **Jump Into Hisec**
- Logged in with MFA user, got factor'd, jumped directly into hisec.
- Logged in with non-MFA user, no factors, normal password reset.
- **Some UI Cleanup**
- Viewed new UI.
- **Misc**
- Created accounts, logged in with welcome link, got verified.
- Changed a username, used link to log back in.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4398
Differential Revision: https://secure.phabricator.com/D9252
Summary:
Fixes T4463. When your VCS or account password is not set, we test it for upgrade anyway. This doesn't make sense and throws shortly into the process because the empty hash isn't parseable.
Instead, only show upgrade prompts when the password exists.
Test Plan:
- Added a password to an existing account with no password via password reset.
- Added a VCS password to an existing account with no VCS password.
- Observed no fatals / nonsense behaviors.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T4463
Differential Revision: https://secure.phabricator.com/D8282
Summary: Fixes T4443. Plug VCS passwords into the shared key stretching. They don't use any real stretching now (I anticipated doing something like T4443 eventually) so we can just migrate them into stretching all at once.
Test Plan:
- Viewed VCS settings.
- Used VCS password after migration.
- Set VCS password.
- Upgraded VCS password by using it.
- Used VCS password some more.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4443
Differential Revision: https://secure.phabricator.com/D8272
Summary:
Ref T4443.
- Add a `password_hash()`-based bcrypt hasher if `password_hash()` is available.
- When a user logs in using a password, upgrade their password to the strongest available hash format.
- On the password settings page:
- Warn the user if their password uses any algorithm other than the strongest one.
- Show the algorithm the password uses.
- Show the best available algorithm.
Test Plan: As an md5 user, viewed password settings page and saw a warning. Logged out. Logged in, got upgraded, no more warning. Changed password, verified database rehash. Logged out, logged in.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4443
Differential Revision: https://secure.phabricator.com/D8270
Summary:
Fixes T4143. This mitigates the "use a botnet to slowly try to login to every user account using the passwords '1234', 'password', 'asdfasdf', ..." attack, like the one that hit GitHub.
(I also donated some money to Openwall as a thanks for compiling this wordlist.)
Test Plan:
- Tried to register with a weak password; registered with a strong password.
- Tried to set VCS password to a weak password; set VCS password to a strong password.
- Tried to change password to a weak password; changed password to a strong password.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, chad
Maniphest Tasks: T4143
Differential Revision: https://secure.phabricator.com/D8048
Summary: This removes the bulk of the "Form Errors" text, some variations likely exists. These are a bit redundant and space consuming. I'd also like to back ErrorView more into PHUIObjectBox.
Test Plan: Test out the forms, see errors without the text.
Reviewers: epriestley, btrahan
CC: Korvin, epriestley, aran, hach-que
Differential Revision: https://secure.phabricator.com/D7924
Summary: I'd like to reuse this for other content areas, renaming for now. This might be weird to keep setForm, but I can fix that later if we need.
Test Plan: reload a few forms in maniphest, projects, differential
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D7120
Summary:
This attempts some consistency in form layouts. Notably, they all now contain headers and are 16px off the sides and tops of pages. Also updated dialogs to the same look and feel. I think I got 98% of forms with this pass, but it's likely I missed some buried somewhere.
TODO: will take another pass as consolidating these colors and new gradients in another diff.
Test Plan: Played in my sandbox all week. Please play with it too and let me know how they feel.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D6806
Summary:
Ref T1536.
- Move all the provider-specific help into contextual help in Auth.
- This provides help much more contextually, and we can just tell the user the right values to use to configure things.
- Rewrite account/registration help to reflect the newer state of the word.
- Also clean up a few other loose ends.
Test Plan: {F46937}
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6247
Summary: Adds mobile support, new forms.
Test Plan: Clicked on each page after converting. Tested mobile menu
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5863
Test Plan:
did a run with ALL CAPS through `/settings/` and subpages. This includes changing (and forgetting) my password.
Did not test the following:
- LDAP
Reviewers: epriestley, btrahan, chad
Reviewed By: chad
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5174
Summary: Done by searching for `AphrontErrorView` and then `appendChild()`.
Test Plan:
Looked at Commit Detail.
Looked at Revision Detail.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2432
Differential Revision: https://secure.phabricator.com/D4843
Summary: Sets all panels to full width and no backgrounds in settings for consistency.
Test Plan: Check each page width.
Reviewers: epriestley, codeblock, btrahan
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4460
Summary:
This commit doesn't change license of any file. It just makes the license implicit (inherited from LICENSE file in the root directory).
We are removing the headers for these reasons:
- It wastes space in editors, less code is visible in editor upon opening a file.
- It brings noise to diff of the first change of any file every year.
- It confuses Git file copy detection when creating small files.
- We don't have an explicit license header in other files (JS, CSS, images, documentation).
- Using license header in every file is not obligatory: http://www.apache.org/dev/apply-license.html#new.
This change is approved by Alma Chao (Lead Open Source and IP Counsel at Facebook).
Test Plan: Verified that the license survived only in LICENSE file and that it didn't modify externals.
Reviewers: epriestley, davidrecordon
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2035
Differential Revision: https://secure.phabricator.com/D3886
Summary:
Currently, we have a hard-coded list of settings panels. Make them a bit more modular.
- Allow new settings panels to be defined by third-party code (see {D2340}, for example -- @ptarjan).
- This makes the OAuth stuff more flexible for {T887} / {T1536}.
- Reduce the number of hard-coded URIs in various places.
Test Plan: Viewed / edited every option in every panel. Grepped for all references to these URIs.
Reviewers: btrahan, vrana, ptarjan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D3257
2012-08-13 12:37:26 -07:00
Renamed from src/applications/settings/panel/PhabricatorUserPasswordSettingsPanelController.php (Browse further)
