Summary: We use numbers here and I see no reason for strings.
Test Plan:
$ bin/storage upgrade
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3303
Summary: Added match to the novel statement: Where in the world is derp?
Test Plan: Say something like "Where in the world is CarmenSandiego?"
Reviewers: epriestley
CC: aran
Differential Revision: https://secure.phabricator.com/D3318
Summary:
See D3126, T1667, T1658. Prior to D3126, `phd` did not use MySQL directly. Now that it does, there are at least two specific problems (see inline comment).
In the long term, we should probably break this dependency and use Conduit. However, we don't currently have access to the daemon log ID and getting it is a mess (the overseer generates it), and I think I want to rewrite how all this works at some point anyway (the daemon calls are currently completely unauthenticated, which is silly -- we should move them to an authenticated channel at some point, I think).
Test Plan: Ran `phd stop` with a bad MySQL config against a non-running daemon, didn't get a query error.
Reviewers: nh, vrana, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1667, T1658
Differential Revision: https://secure.phabricator.com/D3314
Summary: We need to open the envelope here.
Test Plan: Ran `bin/storage dump` without errors.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3315
Summary:
You can now embed countdowns in Remarkup! Not sure what it's
useful for, but there you have it.
Also I may have made a hash of the markup code; I don't really know what
I'm doing.
Test Plan: Make a new countdown, put `{C###}` in a Differential comment.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1053
Differential Revision: https://secure.phabricator.com/D3290
Summary: This is arguably a more useful view than listing all daemons.
Test Plan: Looked at list, only saw daemons that haven't exited
Reviewers: vrana, epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3286
Summary:
Fact engines loading dependent objects are super slow because they load them one by one.
This diff put each page in a Lisk set allowing engines to use `loadRelatives()`.
It also introduces `clearSet()` method which is somewhat neccessary in PHP < 5.3 or with disabled cyclic [[ http://php.net/gc | GC ]].
Test Plan:
$iterator = new PhabricatorFactUpdateIterator(new DifferentialRevision());
foreach ($iterator as $revision) {
$diffs = $revision->loadRelatives(new DifferentialDiff(), 'revisionID');
echo memory_get_usage() . "\n";
}
Experienced not-steadily-increasing memory usage and much faster loading.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3247
Summary:
Currently, we're showing projets in reverse order (Z..A) because most cursor pagers go from high IDs to low IDs.
Allow sequence to be reversed; reverse it.
Also simplify some query/paging stuff.
Test Plan: Set page size to 1, paged back and forth.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D3221
Summary:
- In ProjectQuery, always load the viewer's membership in the project because we need it to perform a CAN_VIEW test.
- Add storage for the view, edit and join policies.
- A user can always view a project if they are a member.
- A user can always join a project if they can edit it.
- Editing a project requires both "view" and "edit" permissions, and edit does not imply view.
- This has no effect on the application yet.
Test Plan: See next diff.
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D3219
Summary:
- Allow PolicyQuery to require specific sets of capabilities other than "CAN_VIEW", like edit, etc. The default set is "view".
- Add some convenience methods to PolicyFilter to test for capabilities.
Test Plan: Viewed pastes, projects, etc. Used other stuff in future diff.
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D3212
Summary:
We currently cache all connections in LiskDAO so we can roll back transactions when fixtured unit tests complete.
Since we establish a new connection wrapper each time we establish a global lock, this cache currently grows without bound.
Instead, pool global lock connections so we never have more than the largest number of locks we've held open at once (in PullLocalDaemon, always 1).
Another way to solve this is probably to add an "onclose" callback to `AphrontDatabaseConnection` so that it can notify any caches that it been closed. However, we currently allow a connection to be later reopened (which seeems reasonable) so we'd need a callback for that too. This is much simpler, and this use case is unusual, so I'd like to wait for more use cases before pursing a more complicated fix.
Test Plan:
Ran this in a loop:
while (true) {
for ($ii = 0; $ii < 100; $ii++) {
$lock = PhabricatorGlobalLock::newLock('derp');
$lock->lock();
$lock->unlock();
}
$this->sleep(1);
}
Previously it leaked ~100KB/sec, now has stable memory usage.
Reviewers: vrana, nh, btrahan
Reviewed By: vrana
CC: aran
Maniphest Tasks: T1636
Differential Revision: https://secure.phabricator.com/D3239
Summary:
Ponder is similar in spirit to the Wiki tool, but uses a Q&A
format and up/downvotes to signal user sentiment. Popular
questions are moved to the top of the feed on a 5-minute
cycle based on age (younger is better) and vote count (higher
is better).
Pre-apologies for noob diff.
Test Plan:
- `./bin/phd list` Should include `PonderHeatDaemon`; phd launch it
if necessary.
- Navigate to /ponder/ ; observe sanity when adding questions,
voting on them, and adding answers.
- Confirm that questions and answers are linkable using Q5 / Q5#A5 formatted object links.
- Confirm that searching for Ponder Questions works using built-in
search.
Feedback on code / schema / whatever organization very welcome.
Reviewers: nh, vrana, epriestley
Reviewed By: epriestley
CC: gmarcotte, aran, Korvin, starruler
Differential Revision: https://secure.phabricator.com/D3136
Summary: Apparently I am not qualified to do basic math.
Test Plan: Unit test.
Reviewers: vrana
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3218
Summary: See discussion in D3078 for why I've separated this. Pretty sure it's not quite ready yet -- I want to build a couple of things on it so we have a better idea of what we need (autoincrement ID? <factType, objectA, epoch> primary key? objectB column? valueZ?) and don't need to do a ton of schema patches.
Test Plan: Applied patches, ran D3078.
Reviewers: vrana, btrahan, majak
Reviewed By: vrana
CC: aran
Maniphest Tasks: T1581, T1562
Differential Revision: https://secure.phabricator.com/D3088
Summary: I think this is simpler? Includes test cases.
Test Plan: Ran tests. Loaded /paste/.
Reviewers: vrana, nh
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3209
Summary: See title. Adds features needed for D3136.
Test Plan:
Observe sanity (or run D3136 in a sandbox
and observe that voting works).
Reviewers: epriestley
Reviewed By: epriestley
CC: gmarcotte, aran, Korvin
Differential Revision: https://secure.phabricator.com/D3205
Summary:
A few goals here:
- Slightly simplify the Query classtree -- it's now linear: `Query` -> `OffsetPagedQuery` (adds offset/limit) -> `PolicyQuery` (adds policy filtering) -> `CursorPagedPolicyQuery` (adds cursors).
- Allow us to move from non-policy queries to policy queries without any backward compatibility breaks, e.g. Conduit methods which accept 'offset'.
- Separate the client limit ("limit") from the datafetch hint limit ("rawresultlimit") so we can make the heurstic smarter in the future if we want. Some discussion inline.
Test Plan: Expanded unit tests to cover offset behaviors.
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D3192
Summary:
- Commit detail view
- List of projects
- "edit" action which takes the user to a simple form where they can only add / remove projects.
- Integrated the project relationship into the commit search indexer
- fixed a bug from D790; it seems you must select the column if you're going to join against it later. Without this change searching for author or projectfails 100% for me.
Test Plan: added and removed projects. verified appropriate projects showed up in detail and edit view. searched for commits by project and found the ones I was supposed to...!
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1614
Differential Revision: https://secure.phabricator.com/D3189
Summary:
- Store project members in edges.
- Migrate existing members to edge storage.
- Delete PhabricatorProjectAffiliation.
- I left the actual underlying data around just in case something goes wrong; we can delete it evenutally.
Test Plan:
- Ran migration.
- Created a new project.
- Joined and left a project.
- Added and removed project members.
- Manually called PhabricatorOwnersOwner::loadAffiliatedUserPHIDs() to verify its behavior.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D3186
Summary:
I'm trying to make progress on the policy/visibility stuff since it's a blocker for Wikimedia.
First, I want to improve Projects so they can serve as policy groups (e.g., an object can have a visibility policy like "Visible to: members of project 'security'"). However, doing this without breaking anything or snowballing into a bigger change is a bit awkward because Projects are name-ordered and we have a Conduit API which does offset paging. Rather than breaking or rewriting this stuff, I want to just continue offset paging them for now.
So I'm going to make PhabricatorPolicyQuery extend PhabricatorOffsetPagedQuery, but can't currently since the `executeWithPager` methods would clash. These methods do different things anyway and are probably better with different names.
This also generally improves the names of these classes, since cursors are not necessarily IDs (in the feed case, they're "chronlogicalKeys", for example). I did leave some of the interals as "ID" since calling them "Cursor"s (e.g., `setAfterCursor()`) seemed a little wrong -- it should maybe be `setAfterCursorPosition()`. These APIs have very limited use and can easily be made more consistent later.
Test Plan: Browsed around various affected tools; any issues here should throw/fail in a loud/obvious way.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D3177
Summary:
See T1602.
This is just the minimal functional patch; the scripts will continue
working because of the `DEFAULT ''`.
Test Plan:
Can't fully test this until I get more code working, but
nothing broke horribly yet.
Reviewers: epriestley
Reviewed By: epriestley
CC: nh, aran, Korvin
Maniphest Tasks: T1602
Differential Revision: https://secure.phabricator.com/D3147
Summary: The Log and PID directory should be separable in the config file
Test Plan: Start the daemons, and check if the pid and log files are stored in directories that were specified in the config file.
Reviewers: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3149
Summary:
- Adds a new "Applications" application.
- Builds an application list via application config instead of via hard-coding, so we can move toward better concepts of installing/uninstalling applications, etc.
- Applications indicate that they need attention with notice counts and brief status messages rathern than 50 giant tables of all sorts of app data.
I want to try replacing the home screen with this screen, pretty much. Not sure if this is totally crazy or not. What does everyone else think?
Test Plan: Will add screenshots.
Reviewers: btrahan, chad, vrana, alanh
Reviewed By: vrana
CC: aran, davidreuss, champo
Maniphest Tasks: T1569
Differential Revision: https://secure.phabricator.com/D3129
Summary:
To make it easier to monitor daemons, let's store their current state
(running, died, exited, or unknown) to the db. The purpose of this is to
provide more information on the daemon console about the status of daemons,
especially when they are running on multiple machines. This is mostly backend
work, with only a few frontend changes. (It is also dependent on a change
to libphutil.)
These changes will make dead or stuck daemons more obvious, and will allow
more work on the frontend to hide daemons (and logs) that have exited cleanly,
i.e. ones we don't care about any more.
Test Plan:
- run db migration, check in db that all daemons were marked as exited
- start up a daemon, check in db that it is marked as running
- open web interface, check that daemon is listed as running
- after daemon has been running for a little bit, check in db that dateModified
is being updated (indicating daemon is properly sending heartbeat)
- kill -9 daemon (but don't run bin/phd yet), and check that db still shows it
as running
- edit daemon db entry to show it as being on a different host, and backdate
dateModified field by 3 minutes, and check the web ui to show that the status
is unknown.
- change db entry to have proper host, check in web ui that daemon status is
displayed as dead. Check db to see that the status was saved.
- run bin/phd stop, and see that the formerly dead daemon is now exited.
Reviewers: epriestley, vrana
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3126
Summary: You need to use -- to separate arguments for phd and the daemon.
Test Plan: Ran with the extra --.
Reviewers: epriestley, vrana
Reviewed By: vrana
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3106
Summary:
Some facts are aggregations of other facts. For example, we may compute how many times each macro is used in each object as a "raw fact":
Dnnn uses macro "psyduck" 6 times.
But we want to present this data in aggregate form, e.g. "order macros by popularity". We can do this at runtime and it probably won't be too awful a query, but we can also aggregate it cheaply:
Macro "psyduck" is used 3920 times across all objects.
...and then do a query like "select macros ordered by usage".
"Aggregate" facts support facts like this. The aggregate facts I've implemented are:
- Count of all objects.
- Count of objects of type X.
- Last time facts were updated.
These clearly fit the "aggregate" facts template well. I'm not 100% sure macros do. We can use this table to answer a question like "What are the most popular macros, ordered by use?" We can also use it to answer a question like "What are the most popular macros in the last 6 months?", if we build a specific fact for that. But we can't use it to answer a question like "What are the most popular macros between times X and Y?". Maybe that's important; maybe not.
This seems like a good fit for at least some types of facts.
I'll de-magic the keys a bit in the next diff.
Test Plan: Ran the engines and got some aggregated facts about other facts.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Maniphest Tasks: T1562
Differential Revision: https://secure.phabricator.com/D3089
Summary:
Basic "Fact" application with some storage, part of a daemon, and a control binary.
= Goals =
The general idea is that we have various statistics we'd like to compute, like the frequency of image macros, reviewer responsiveness, task close rates, etc. Computing these on page load is expensive and messy. By building an ETL pipeline and running it in a daemon, we can precompute statistics and just pull them out of "stats" tables.
One way to do this is just to completely hard-code everything, e.g. have a daemon that runs every hour which issues a big-ass query and dumps results into a table per-fact or per fact-group. But this has a bunch of drawbacks: adding new stuff to the pipeline is a pain, various fact aggregators can't share much code, updates are slow and expensive, we can never build generic graphs on top of it, etc.
I'm hoping to build an ETL pipeline which is generic enough that we can use it for most things we're interested in without needing schema changes, and so that installs can use it also without needing schema changes, while still being specific enough that it's fast and we can build useful stuff on top of it. I'm not sure if this will actually work, but it would be cool if it does so I'm starting pretty generally and we'll see how far I get. I haven't built this exact sort of thing before so I might be way off.
I'm basing the whole thing on analyzing entire objects, not analyzing changes to objects. So each part of the pipeline is handed an object and told "analyze this", not handed a change. It pretty much deletes all the old data about that thing and then writes new data. I think this is simpler to implement and understand, and it protects us from all sorts of weird issues where we end up with some kind of garbage in the DB and have to wipe the whole thing.
= Facts =
The general idea is that we extract "facts" out of objects, and then the various view interfaces just report those facts. This change has on type of fact, a "raw fact", which is directly derived from an object. These facts are concerete and relate specifically to the object they are derived from. Some examples of such facts might be:
D123 has 9 comments.
D123 uses macro "psyduck" 15 times.
D123 adds 35 lines.
D123 has 5 files.
D123 has 1 object.
D123 has 1 object of type "DREV".
D123 was created at epoch timestamp 89812351235.
D123 was accepted by @alincoln at epoch timestamp 8397981839.
The fact storage looks like this:
<factType, objectPHID, objectA, valueX, valueY, epoch>
Currently, we supprot one optional secondary key (like a user PHID or macro PHID), two optional integer values, and an optional timestamp. We might add more later. Each fact type can use these fields if it wants. Some facts use them, others don't. For instance, this diff adds a "N:*" fact, which is just the count of total objects in the system. These facts just look like:
<"N:*", "PHID-xxxx-yyyy", ...>
...where all other fields are ignored. But some of the more complex facts might look like:
<"DREV:accept", "PHID-DREV-xxxx", "PHID-USER-yyyy", ..., ..., nnnn> # User 'yyyy' accepted at epoch 'nnnn'.
<"FILE:macro", "PHID-DREV-xxxx", "PHID-MACR-yyyy", 17, ..., ...> # Object 'xxxx' uses macro 'yyyy' 17 times.
Facts have no uniqueness constraints. For @vrana's reviewer responsiveness stuff, we can insert multiple rows for each reviewer, e.g.
<"DREV:reviewed", "PHID-DREV-xxxx", "PHID-USER-yyyy", nnnn, ..., mmmm> # User 'yyyy' reviewed revision 'xxxx' after 'nnnn' seconds at 'mmmm'.
The second value (valueY) is mostly because we need it if we sample anything (valueX = observed value, valueY = sample rate) but there might be other uses. We might need to add "objectB" at some point too -- currently we can't represent a fact like "User X used macro Y on revision Z", so it would be impossible to compute macro use rates //for a specific user// based on this schema. I think we can start here though and see how far we get.
= Aggregated Facts =
These aren't implemented yet, but the idea is that we can then take the "raw facts" and compute derived/aggregated/rollup facts based on the raw fact table. For example, the "count" fact can be aggregated to arrive at a count of all objects in the system. This stuff will live in a separate table which does have uniqueness constraints, and come in the next diff.
We might need some kind of time series facts too, not sure about that. I think most of our use cases today are covered by raw facts + aggregated facts.
Test Plan: Ran `bin/fact` commands and verified they seemed to do reasonable things.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran, majak
Maniphest Tasks: T1562
Differential Revision: https://secure.phabricator.com/D3078
Summary: PhutilBufferedIterator now implements all the nonspecific logic here.
Test Plan:
Created a test script like this:
$iterator = new LiskMigrationIterator(new DifferentialRevision());
$iterator->setPageSize(3);
foreach ($iterator as $key => $rev) {
echo "{$key}: ".$rev->getID()."\n";
}
Ran it and verified sensible iteration results.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Maniphest Tasks: T1562
Differential Revision: https://secure.phabricator.com/D3076
Summary: Also move the other tests up so they'll trigger when this stuff is touched.
Test Plan: liberate
Reviewers: nh, btrahan, vrana
Reviewed By: nh
CC: aran
Maniphest Tasks: T1283
Differential Revision: https://secure.phabricator.com/D3074
Summary:
Currently, we have this cumbersome `PhabricatorRepositoryCommitMessageDetailParser` hook. This is really old and outdated; I want to just use the Differential custom field parser. See T945 for a specific application.
However, it allows installs to override author/committer association. Instead, provide an event hook for doing this.
Test Plan: Added a listener, made every commit resolve to "turtle", parsed some commits, verified the events looked sane and they now correctly were all attributed to "turtle".
Reviewers: btrahan, vrana, nh
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1337
Differential Revision: https://secure.phabricator.com/D3040
Summary: Currently, MySQL/MySQLi connections store passwords in plain text on the object. Allow them to be stored in PhutilOpaqueEnvelopes instead. See D3053.
Test Plan: Loaded site.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3054
Summary: We pull "retries" and a doc link from PhabricatorEnv directly. Break these dependencies so the classes can move to libphutil.
Test Plan: Browsed site, triggered a schema exception and verified I still got the useful footer text.
Reviewers: btrahan, vrana
Reviewed By: vrana
CC: aran
Maniphest Tasks: T1283
Differential Revision: https://secure.phabricator.com/D3053
Summary: Add an explicit close() method to connections and call it in GlobalLock.
Test Plan:
Wrote a script like this:
$lock = PhabricatorGlobalLock::newLock('test');
echo "LOCK";
$lock->lock();
sleep(10);
echo "UNLOCK";
$lock->unlock();
sleep(9999);
Using `SHOW FULL PROCESSLIST`, verified the connection closed after 10 seconds with both the "MySQL" and "MySQLi" implementations.
Reviewers: btrahan, vrana
Reviewed By: vrana
CC: aran
Maniphest Tasks: T1470
Differential Revision: https://secure.phabricator.com/D3035
Summary: created a PhabricatorInlineCommentPreviewController so controllers in Diffusion and Differential respectively just have to handle the URI mapping and data loading like good little controllers.
Test Plan:
left inline comments on commits, deleted inline commits, submitted inline comments -- all worked well
did the same on some diffs
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1176
Differential Revision: https://secure.phabricator.com/D3034
Summary:
- Add edges for this relationship.
- Use edges to store this data.
- Migrate old data.
- Fix some warnings with generating feed stories about Aux and Edge transactions.
- Fix a task-task edge issue with "Create Subtask".
Test Plan:
- Migrated data, verified reivsions showed up.
- Attached and detached tasks to revisions and vice versa.
- Created a new revision with attached tasks.
- Created a subtask.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D3018
Summary: Theses are sort of silly anyway since they should all have the actor in them rather than being sentence fragments, but make them work OK for English at least. See D3013.
Test Plan:
Ran:
echo pht('added %d dependencie(s): %s', 1, 'derp')."\n";
echo pht('added %d dependencie(s): %s', 2, 'derp, derp')."\n";
Got:
added dependency: derp
added dependencies: derp, derp
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3015
Summary:
blogs are collections of posts. a blog also has metadata like a name, description and "bloggers" that can edit the metadata of the blog and contribute posts.
changes include the post edit flow where bloggers can now select which blogs to publish to. also made various small tweaks throughout the UI to make things sensical and clean as the concept of blogs is introduced.
there's edges powering this stuff. bloggers <=> blogs and posts <=> blogs in particular.
Test Plan:
made blogs, deleted blogs, tried to make blogs with no bloggers. all went well.
verified ui to publish only showed up for public posts, published posts to blogs, un-published posts to blogs, re-published posts to blogs, deleted posts and verified they disappeared from blogs.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1373
Differential Revision: https://secure.phabricator.com/D3003
Summary: See D3006. Move this data to the edge store.
Test Plan:
- Created dependencies, migrated, verified dependencies were preserved.
- Added new dependencies, they worked.
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1162
Differential Revision: https://secure.phabricator.com/D3007
