Summary:
Yeahhhhhhhh....
- Open a "stream", not a "steam".
- Make error easier for users to understand.
- Write to the log in debug mode so the issue is more apparent.
Test Plan:
- Started server with bad permissions, got usable error message.
- Started server with good permissions, got logfile.
Reviewers: joshuaspence, btrahan
Reviewed By: btrahan
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11339
Summary: If you are running the Aphlict server behind a reverse proxy (such as `nginx`) then there's no need to bind to `0.0.0.0`. Add a `--client-host` flag to `aphlict_server.js` to allow binding to a different hostname. Also changed the other flags for consistency and clarity.
Test Plan: Started, stopped and debug the Aphlict server.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11288
Summary: Fixes T6910. This advice is bad, doesn't work, and was based on me havng an outdated or incorrect understanding of Node and npm.
Test Plan: Read documentation.
Reviewers: richardvanvelzen, btrahan, chad, joshuaspence
Reviewed By: chad, joshuaspence
Subscribers: epriestley
Maniphest Tasks: T6910
Differential Revision: https://secure.phabricator.com/D11285
Summary:
Fixes T6559. No more flash, use Websockets. This is less aggressive than the earlier version, and retains more server logic.
- Support "wss".
- Make the client work.
- Remove "notification.user" entirely.
- Seems ok?
Test Plan:
In Safari, Firefox and Chrome, saw the browsers connect. Made a bunch of comments/updates and saw notifications.
Notable holes in the test plan:
- Haven't tested "wss" yet. I'll do this on secure.
- Notifications are //too fast// now, locally. I get them after I hit submit but before the page reloads.
- There are probably some other rough edges, this is a fairly big patch.
Reviewers: joshuaspence, btrahan
Reviewed By: joshuaspence, btrahan
Subscribers: fabe, btrahan, epriestley
Maniphest Tasks: T6713, T6559
Differential Revision: https://secure.phabricator.com/D11143
Summary: We don't need to handle any request data for the `/status/` route, so we can simplify this code slightly.
Test Plan:
```lang=bash
> curl http://127.0.0.1:22281/status/
{"uptime":2543,"clients.active":0,"clients.total":0,"messages.in":0,"messages.out":0,"log":"/var/log/aphlict.log","version":6}
```
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11145
Summary: Basically, don't assign expressions to a variable if the variable is unused.
Test Plan: `arc lint`
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11072
Summary: Ref T5651. Only throw a HTTP 400 if the data is invalid (i.e. the request is bad). If something bad happens when trying to transmit the notification, throw a HTTP 500 instead.
Test Plan: Eye-ball it.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Maniphest Tasks: T5651
Differential Revision: https://secure.phabricator.com/D9968
Summary: Ref T5651. Currently, the Aphlict server returns either `200 OKAY` or `400 Bad Request`. We could return more specific errors in some cases and this may assist with debugging.
Test Plan:
Sent myself a test notification at `/notification/status/` and saw the Aphlict server process the request (running in debug mode). Also poked around with `curl`:
```
> curl http://localhost:22281/
405 Method Not Allowed
> curl http://localhost:22281/ -d ""
400 Bad Request
> curl http://localhost:22281/foobar/
404 Not Found
```
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5651
Differential Revision: https://secure.phabricator.com/D9967
Summary: Fixes T5651. Sometime we'll send an object to the notification server for `subscribers`, which it will choke on. Use `array_values()` to make sure we're sending an array.
Test Plan: With `(object)` instead, got a consistent error ("no .filter method on object"). With `array_values()`, no error.
Reviewers: joshuaspence
Reviewed By: joshuaspence
Subscribers: epriestley
Maniphest Tasks: T5651
Differential Revision: https://secure.phabricator.com/D9963
Summary: Various fixes as suggested by JSHint.
Test Plan: Eye-balled it.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9783
Summary: As pointed out by @epriestley in D9458#62, this call to `debug.log` is missing an argument.
Test Plan: meh..
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D9485
Summary: Ref T4324. Ref T5284. This adds server-side support for keeping track of a set of PHIDs that the Aphlict clients have subscribed to. Instead of broadcasting a notification to all clients (after which the clients can poll `/notification/individual` in order to determine whether or not they are interested in the notification), transmit notifications only to clients that have subscribed to a PHID that is relevant to the notification.
Test Plan:
I opened up two clients on the same host (incognito tabs in Chrome). Here is the output from the server:
```
> sudo ./bin/aphlict debug
Starting Aphlict server in foreground...
Launching server:
$ 'nodejs' '/usr/src/phabricator/src/applications/aphlict/management/../../../../support/aphlict/server/aphlict_server.js' --port='22280' --admin='22281' --host='localhost' --user='aphlict'
[Wed Jun 11 2014 19:10:27 GMT+0000 (UTC)] Started Server (PID 4546)
[Wed Jun 11 2014 19:10:36 GMT+0000 (UTC)] <FlashPolicy> Policy Request From ::ffff:192.168.1.1
[Wed Jun 11 2014 19:10:37 GMT+0000 (UTC)] <Listener/1> Connected from ::ffff:192.168.1.1
[Wed Jun 11 2014 19:10:37 GMT+0000 (UTC)] <Listener/1> Received data: {"command":"subscribe","data":["PHID-USER-cb5af6p4oepy5tlgqypi"]}
[Wed Jun 11 2014 19:10:37 GMT+0000 (UTC)] <Listener/1> Subscribed to: ["PHID-USER-cb5af6p4oepy5tlgqypi"]
[Wed Jun 11 2014 19:10:39 GMT+0000 (UTC)] <Listener/1> Received data: {"command":"subscribe","data":["PHID-USER-kfohe3ca5oe6ygykmioq"]}
[Wed Jun 11 2014 19:10:39 GMT+0000 (UTC)] <Listener/1> Subscribed to: ["PHID-USER-kfohe3ca5oe6ygykmioq"]
[Wed Jun 11 2014 19:10:42 GMT+0000 (UTC)] notification: {"key":"6023751084283587681","type":"notification","subscribers":["PHID-USER-cb5af6p4oepy5tlgqypi"]}
[Wed Jun 11 2014 19:10:42 GMT+0000 (UTC)] <Listener/1> Wrote Message
```
I verified (using the "Network" tab in Chrome) that an AJAX request to `/notification/individual/` was only made in the tab belonging to the user that triggered the test notification.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Maniphest Tasks: T5284, T4324
Differential Revision: https://secure.phabricator.com/D9458
Summary: Printing out `err` is less informative than `err.stack`, which has the message, type, //and// a trace.
Test Plan:
Faked an exception, then:
```
$ sudo ./bin/aphlict debug
Starting Aphlict server in foreground...
Launching server:
$ 'node' '/INSECURE/devtools/phabricator/src/applications/aphlict/management/../../../../support/aphlict/server/aphlict_server.js' --port='22280' --admin='22281' --host='localhost'
[Wed Jun 11 2014 10:20:39 GMT-0700 (PDT)]
<<< UNCAUGHT EXCEPTION! >>>
Error: Example Exception
at Object.<anonymous> (/INSECURE/devtools/phabricator/support/aphlict/server/aphlict_server.js:73:7)
at Module._compile (module.js:456:26)
at Object.Module._extensions..js (module.js:474:10)
at Module.load (module.js:356:32)
at Function.Module._load (module.js:312:12)
at Function.Module.runMain (module.js:497:10)
at startup (node.js:119:16)
at node.js:901:3
>>> Server exited!
```
Reviewers: joshuaspence
Reviewed By: joshuaspence
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D9481
Summary:
Currently, the Aphlict server will crash if invalid JSON data is `POST`ed to it. I have fixed this to, instead, return a 400. Also made some minor formatting changes.
Ref T4324. Ref T5284. Also, modify the data structure that is passed around (i.e. `POST`ed to the Aphlict server and broadcast to the Aphlict clients) to include the subscribers. Initially, I figured that we shouldn't expose this information to the clients... however, it is necessary for T4324 that the `AphlictMaster` is able to route a notification to the appropriate clients.
Test Plan:
Making the following `curl` request: `curl --data "{" http://localhost:22281/`.
**Before**
```
sudo ./bin/aphlict debug
Starting Aphlict server in foreground...
Launching server:
$ 'nodejs' '/usr/src/phabricator/src/applications/aphlict/management/../../../../support/aphlict/server/aphlict_server.js' --port='22280' --admin='22281' --host='localhost' --user='aphlict'
[Wed Jun 11 2014 17:07:51 GMT+0000 (UTC)] Started Server (PID 2033)
[Wed Jun 11 2014 17:07:55 GMT+0000 (UTC)]
<<< UNCAUGHT EXCEPTION! >>>
SyntaxError: Unexpected end of input
>>> Server exited!
```
**After**
(No output... the bad JSON is caught and a 400 is returned)
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4324, T5284
Differential Revision: https://secure.phabricator.com/D9480
Summary:
Ref T4324. As well as sending the key for the notification, also publish the notification type and a list of subscribers to the Aphlict server.
The idea here is that the Aphlict server passes anything within the `data` key to the clients, whereas other keys (such as `subscribers`) will be used by the server to determine where the notifications should be routed.
Note that these changes don't do anything useful, but are a prerequisite for further work on T4324.
Test Plan:
Sent myself test notifications at `/notification/status/`. Also inspected the Aphlict server debug output:
```
> sudo ./bin/aphlict --foreground
Starting server in foreground, ignoring pidfile...
Launching server:
$ node '/usr/src/phabricator/support/aphlict/server/aphlict_server.js' --port='22280' --admin='22281' --host='localhost' --user='aphlict' --log='/var/log/aphlict.log'
[Thu Jun 05 2014 18:38:14 GMT+0000 (UTC)] Started Server (PID 15437)
[Thu Jun 05 2014 18:38:16 GMT+0000 (UTC)] <FlashPolicy> Policy Request From ::ffff:10.0.0.1
[Thu Jun 05 2014 18:38:16 GMT+0000 (UTC)] <Listener/1> Connected from ::ffff:10.0.0.1
[Thu Jun 05 2014 18:38:19 GMT+0000 (UTC)] notification: {"data":{"key":"6021516228036848559","type":"notification"},"subscribers":["PHID-USER-cb5af6p4oepy5tlgqypi"]}
[Thu Jun 05 2014 18:38:19 GMT+0000 (UTC)] <Listener/1> Wrote Message
```
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Maniphest Tasks: T4324
Differential Revision: https://secure.phabricator.com/D9396
Summary:
Ref T4324. Currently, notifications data is `POST`ed to the Aphlict server in the `application/x-www-form-urlencoded` format. This works fine for simple data but is problematic for nested data. For example:
```lang=php
array(
'data' => array(
'key' => '6021329908492455737',
'type' => 'PhabricatorNotificationAdHocFeedStory',
),
'subscribers' => array(
'PHID-USER-y7ofqm276ejs62yqghge',
),
);
```
Is encoded as `data%5Bkey%5D=6021329908492455737&data%5Btype%5D=PhabricatorNotificationAdHocFeedStory&subscribers%5B0%5D=PHID-USER-y7ofqm276ejs62yqghge`. This string is then (incorrectly) decoded by `querystring.parse` as:
```lang=javascript
> querystring.parse('data%5Bkey%5D=6021329908492455737&data%5Btype%5D=PhabricatorNotificationAdHocFeedStory&subscribers%5B0%5D=PHID-USER-y7ofqm276ejs62yqghge');
{ 'data[key]': '6021329908492455737',
'data[type]': 'PhabricatorNotificationAdHocFeedStory',
'subscribers[0]': 'PHID-USER-y7ofqm276ejs62yqghge' }
```
Test Plan: Sent test notifications from `/notification/status/` and verified that the notifications still worked.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4324
Differential Revision: https://secure.phabricator.com/D9386
Summary: Ref T4324. One of the server we start just sends pre-canned XML responses. Separate it out of the main file and hand it all the objects it interacts with in structured, reasonable ways.
Test Plan: Hit "Send Test Notification", saw notification, saw flash policy info in the log.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4324
Differential Revision: https://secure.phabricator.com/D8257
Summary:
Ref T4324.
- Create `Listener` to represent listening clients.
- Create `ListenerList` to represent the current list of clients.
- Create `Logfile` to handle logging.
Test Plan: Clicked "Send Test Notification", verified logs, status and notifications all work correctly.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4324
Differential Revision: https://secure.phabricator.com/D8256
Summary:
Ref T4324. The server code is probably going to get a fair amount more complicated, so allow it to load Javelin classes in a mostly-reasonable way.
This integration has a few warts, but should be good enough to let us manage complexity through the next iteration of the server.
(Mostly I just want the concicse Javelin mechanism for defining new classes.)
Version bump is just so I can figure stuff out if this creates any issues for users based on which version of things they're running.
Test Plan: Started server, posted some messages through it.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4324
Differential Revision: https://secure.phabricator.com/D8253
Summary: Ref T4324. Add some version information to the server status output, and setup checks to test for an unreachable or out-of-date server.
Test Plan:
- With server down, hit reasonable setup check.
- With server up and at a bad version, hit reasonable setup check.
- Viewed `/notification/status/`.
- The CSS thing fixes this:
{F114445}
Reviewers: btrahan, chad
Reviewed By: chad
CC: chad, aran
Maniphest Tasks: T4324
Differential Revision: https://secure.phabricator.com/D8251
Summary: If `jsxmin` is not available, use a pure PHP implementation instead (JsShrink).
Test Plan:
- Ran `arc lint --lintall` on all JS and fixed every relevant warning.
- Forced minification on and browsed around the site using JS behaviors. Didn't hit anything problematic.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5670
Summary: At some point, Node started requiring us to read data before we can get the 'end' event, it seems. Fixes T2953.
Test Plan: Ran server in `--foreground` mode on node v0.11.0, made request to `/status/`, got response.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2953
Differential Revision: https://secure.phabricator.com/D5666
Summary: We allow user to specify the host to listen to but we listen on 127.0.0.1 instead.
Test Plan:
Hardcoded the path and verified that I can connect to the host from other machine.
Verified that `localhost` still doesn't allow remote connections.
Reviewers: ddfisher, epriestley, nh
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4238
Summary: Add a `notification.debug` setting that shows debug info in the browser. Also improve some logging/error handling stuff and fix a bug with host names.
Test Plan: {F13098}
Reviewers: jungejason, btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T944
Differential Revision: https://secure.phabricator.com/D2810
Summary:
- Move to port 22280 by default.
- Warn when running as non-root.
- Allow subscription and publish/admin ports to be configured.
- Allow server to drop root after binding to 843.
- Allow log path to be configured.
- Add /status/ admin URI which shows server status.
- Return HTTP 400 Bad Request for other requests, instead of hanging.
- Minor formatting cleanup.
Test Plan:
Ran without root:
$ node aphlict_server.js
...got a good error message. Ran with --user:
$ sudo node aphlict_server.js --user=epriestley
...verified server dropped permissions. Ran with --port / --admin. Hit /status/ with GET, got status. Hit other URLs with GET, got 400.
Reviewers: allenjohnashton, ddfisher, keebuhm
Reviewed By: ddfisher
CC: aran
Differential Revision: https://secure.phabricator.com/D2737
Summary:
Adds the node.js Aphlict server, the flash Aphlict client, and some
supporting javascript. Built on top of - and requires - D2703 (which is still
in progress). Will likely work with no modification on top of the final
version, though.
The node server is currently run with
sudo node support/aphlict/server/aphlict_server.js
Test Plan: tested locally
Reviewers: epriestley
Reviewed By: epriestley
CC: allenjohnashton, keebuhm, aran, Korvin
Differential Revision: https://secure.phabricator.com/D2704
Summary: Provide a reasonable JS API for the Aphlict client. Provide an example behavior to invoke it.
Test Plan:
Ran "aphlict_server.js" with:
$ sudo node aphlict_server.js
Loaded /aphlict/. Opened console. Got "hello" from the server every second.
Got reasonable errors with the server not present ("Security exception", but this is because it can't connect to port 843 to access the policy server).
Reviewers: ddfisher, keebuhm, allenjohnashton, btrahan
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T944
Differential Revision: https://secure.phabricator.com/D1800
Summary:
This is purely a prototype at the moment, but the basic functionality sort of
works.
I'm not sure how far I want to go with this but I think we might be able to get
somewhere without it being gross.
The idea here is to build a notification server WITHOUT using Comet, since Comet
is extremely difficult and complicated.
Instead, I use Flash on the client. LocalConnection allows flash instances to
talk to each other and connect() can be used as a locking primitive. This allows
all the instances to elect a master instance in a race-safe way. The master is
responsible for opening a single connnection to the server.
On the server, I use Node.js since PHP is pretty unsuitable for this task.
See Github Issue #3: https://github.com/facebook/phabricator/issues/3
One thing I need to figure out next is if I can reasonably do SSL/TSL over Flash
(it looks like I can, in theory, with the as3crypto library) or if the server
needs to just send down version information and trigger a separate Ajax call on
the client.
Test Plan:
Created a client pool and connected it to the server, with election and failover
apparently working correctly.
Reviewed By: aran
Reviewers: Girish, aran, jungejason, tuomaspelkonen, davidrecordon
Commenters: Girish, davidrecordon
CC: aran, epriestley, Girish, davidrecordon
Differential Revision: 284
