Summary: Ref T12600. This makes the background solid when in hovercard context.
Test Plan: Close a task, view hovercard, see solid background
Reviewers: epriestley, amckinley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12600
Differential Revision: https://secure.phabricator.com/D17788
Summary:
Ref T12613. Currently, the SVNTEST and HGTEST repositories are improperly configured on `secure`. These repositories use VCS systems which do not support synchronization, so they can not be served from cluster services with multiple hosts.
However, I've incorrectly configured them the same way as all the Git repositories, which support synchronization. This causes about 50% of requests to randomly fail (when they reach the wrong host).
Detect this issue and warn the user that the configuration is not valid.
It should be exceptionally difficult for normal installs to run into this.
Test Plan:
- Mostly faked these conditions locally, verified that `secure` really has this configuration.
- I'll push this, verify that the issue is detected correctly in production, then fix the config which should resolve the intermittent issues with SVNTEST.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12613
Differential Revision: https://secure.phabricator.com/D17774
Summary:
Depends on D17785. Fixes T12635. There was a bug where users could verify their primary email without getting the "isEmailVerified" flag set on their accounts.
D17785 fixes this bug. This change migrates affected account to fix their state, now that they can't get in trouble any more (hopefully).
Test Plan:
- Explicitly removed this flag from a bunch of accounts.
- Ran migration, saw the accounts get fixed.
- Ran migration again (`storage upgrade --apply ...`), saw the accounts not get touched.
- We have 117 affected accounts on `secure`, so I'll verify that this fixes them.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12635
Differential Revision: https://secure.phabricator.com/D17786
Summary:
Ref T12635. See that task for discussion.
You can currently end up with a verified primary address but no "verified" flag on your account through an unusual sequence of address mutations.
Test Plan:
- Registered without verifying, using address "A".
- Added a second email address, address "B".
- Verified B (most easily with `bin/auth verify`).
- Changed my primary email to B.
- Before patch: account not verified.
- After patch: account verified.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12635
Differential Revision: https://secure.phabricator.com/D17785
Summary:
Fixes T10954. This got hidden underneath things at some point.
Use `pointer-events: none` to make the mouse ignore the element so that hover/select/edit/click still work "through" the element.
Design could probably be improved here, maybe I'll make it more-visible when you press {key n} and then have it fade quickly so it kind of gets out of your way once you find the block you want to read.
Test Plan: {F4921746}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10954
Differential Revision: https://secure.phabricator.com/D17784
Summary: Swaps out hovercard boring view for super cool workboard card view. Will have more diffs to add additional information down the road.
Test Plan: {F4921092}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17769
Summary:
Ref T12611. Currently, the HTTP/SSH logs don't have an option to include the instance name.
Add such an option.
Leave it out of the default logs because most installs don't use this.
Test Plan: See next changes.
Reviewers: chad, amckinley
Reviewed By: chad
Maniphest Tasks: T12611
Differential Revision: https://secure.phabricator.com/D17776
Summary:
The quickstart SQL hasn't been regenrated in a while, mildly impacting unit test and instance startup times.
- Use `bin/storage quickstart` to regenerate quickstart.
- Manually set the FULLTEXT tables back to `MyISAM` until we deal with T11741.
Test Plan:
- Saw database setup drop from ~10,500ms to ~7,500ms locally.
- Visually inspected diff, changes looked expected.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17775
Summary: Fixes T12614.
Test Plan:
- Ran tests, saw them pass.
- Changed a thumbnail to 800x800, saw tests detect that the default image was missing.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12614
Differential Revision: https://secure.phabricator.com/D17773
Summary:
Fixes T12628. After later changes to `PhabricatorFile`, this migration no longer runs if you upgrade through it to a recent `HEAD` while your data has some room images.
Since this isn't critical and has been available for ~6 months, I just nuked it as a first pass. I can find a more careful approach which lets us continue to run this migration instead if you're hesitant to skip this step, although it may be a little involved.
In 95% of cases we avoid this by updating the storage table as it existed at the time the migraiton ran, but Files are much too complicated for that to be realistic.
Test Plan: Ran `bin/storage upgrade -f --apply phabricator:20161005.conpherence.image.2.php`, saw it do nothing.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12628
Differential Revision: https://secure.phabricator.com/D17770
Summary: Ref T12622.
Test Plan: As a logged-out and logged-in user, loaded Conpherence threads.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12622
Differential Revision: https://secure.phabricator.com/D17768
Summary: Fixes T12622. This variable is mis-named.
Test Plan: Visit a room I have not joined.
Reviewers: epriestley, amckinley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12622
Differential Revision: https://secure.phabricator.com/D17767
Summary:
Ref T12612. This updates the rate limiting code to:
- Support a customizable token, like the client's X-Forwarded-For address, rather than always using `REMOTE_ADDR`.
- Support APCu.
- Report a little more rate limiting information.
- Not reference nonexistent documentation (removed in D16403).
I'm planning to put this into production on `secure` for now and then we can deploy it more broadly if things work well.
Test Plan:
- Enabled it locally, used `ab -n 100` to hit the limit, saw the limit enforced.
- Waited a while, was allowed to browse again.
Reviewers: chad, amckinley
Reviewed By: amckinley
Maniphest Tasks: T12612
Differential Revision: https://secure.phabricator.com/D17758
Summary: Fixes T12619.
Test Plan: Faked `return array()` in ConpherneceThreadQuery, got a NUX instead of fatal.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12619
Differential Revision: https://secure.phabricator.com/D17764
Summary:
Closes T7829 as wontfix. Closes T7965 as wontfix. Closes T7800 as wontfix. Closes T2731 as wontfix. Closes T1271 as wontfix.
We aren't maintaining this at all (see, e.g., T7829) and a user reported a technically accurate security issue via HackerOne: <https://hackerone.com/reports/222870>
Just throw it away until we get to the eventual Conphernece bot/API update and can do this stuff correctly.
Test Plan: Grepped for `phabricatorbot`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7965, T7829, T7800, T2731, T1271
Differential Revision: https://secure.phabricator.com/D17756
Summary: Visually these are hard to see on blue backgrounds, adds a touch more contrast. Fixes T12604
Test Plan: View as pager and dialog
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12604
Differential Revision: https://secure.phabricator.com/D17755
Summary: Uses more standard objects and more padding for reading. Removes the ToC, which is visually broken anyways.
Test Plan: Review a README.md in a local repository.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17752
Summary: Adds the ability to set a pager onto an object box directly and pick up appropriate styles.
Test Plan: grep for renderTablePagerBox, test layouts with and without a pager.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12604
Differential Revision: https://secure.phabricator.com/D17754
Summary: These icons are off center currently.
Test Plan: Review a clone uri in local repository.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17753
Summary: iam
Test Plan: iam
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17751
Summary: This adds some basic per user / per room theming for Conpherence, which should hopefully let users identify rooms from just the sidebar color.
Test Plan: Lots of threads with different colors.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17747
Summary:
Ref T12562. I think the pre-send-on-enter behavior was: disable textarea, send message, clear area on response?
That got changed but not completely, maybe. There's currently an issue here:
- Add a `sleep(3)` to `UpdateController`.
- Type "AAA".
- Press enter.
- Real fast, type "BBB".
- When the "AAA" arrives, your "BBB" is lost. Sad!
Test Plan:
- Did the thing described above; no longer lost "BBB".
- Switched threads, sent messages, couldn't find anything else this breaks. It dates from a long time ago so I think it's just pre-SOE stuff.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12562
Differential Revision: https://secure.phabricator.com/D17742
Summary: Makes it more clear whose authority actions have been taken under.
Test Plan: {F4916376}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17741
Summary: Ref T12591. These preferences are per user and we need to reload the whole UI on a change anyways. Simplifies future expansion.
Test Plan: Option click into new window, set preferences. View in Conpherence, see saved settings, change sound. Hear new sound.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12591
Differential Revision: https://secure.phabricator.com/D17740
Summary:
Fixes T12599. If you're faster than the network request, we don't actually resolve your query when the data arrives.
Instead, when the data shows up, run the query if the user has typed something.
Test Plan: Pasted a filename in real fast, got results. (Previously: no results until you press something else.)
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12599
Differential Revision: https://secure.phabricator.com/D17739
Summary:
Ref T11476. This is a bit hacky, but makes `Application` extend `LiskDAO` so we can apply transactions to it with an `Editor` class.
Also fixes schema stuff so builds should produce a clean bill of health again.
This might only get you slightly further, yell if you run into more trouble.
Test Plan:
- Ran `bin/storage upgrade -f` and got no warnings.
- Browsed around, nothing exploded?
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T11476
Differential Revision: https://secure.phabricator.com/D17738
Summary: Part of the groundwork for T11476.
Test Plan: ran `./bin/storage upgrade` and observed expected DB tables
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11476
Differential Revision: https://secure.phabricator.com/D17736
Summary: Sets notification and sound preferences in a single array()
Test Plan: Change email preference, save, set sound preference, save. Email preference still OK.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17735
Summary: Moves participants over to ModularTransactions, simplified a lot of the code. Fixes T12550
Test Plan:
Create a new room with just myself and myself + fake accounts.
Remove a person.
Remove myself.
Edit a room, topic.
Type some messages.
???
Profit
Reviewers: chad
Reviewed By: chad
Subscribers: Korvin
Maniphest Tasks: T12550
Differential Revision: https://secure.phabricator.com/D17685
Summary:
Pathway to D17685. We no longer have "behindTransactionPHID", so we no longer need the latest transaction.
This allows some code to be removed.
Test Plan:
- Grepped for callsites to `markUpToDate()` and variables used in the calls.
- Sent messages in a couple threads, viewed them, saw unread counts go away.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17733
Summary:
Pathway to D17685. This fixes an issue idenified in D17731: if any caller ever queried for more than one participant, some results could get thrown away by re-keying the results on thread PHID: two different participants can be members of the same thread!
This also fixes an issue from D17683, where a `needParticipantCache()` callsite was overlooked.
Test Plan:
- Viewed Conpherence dropdown.
- Sent messages, saw unread count / thread order still work properly.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17732
Summary:
Pathway to D17685. This column is (mostly) a denormalization of `dateModified` on the thread.
Just use a JOIN instead.
This isn't //exactly// the same: we'll bump threads to the top now for non-message changes (e.g., a topic or title change). That seems fine, but we could put a `lastMessageDate` on Thread later if we want to refine it.
Also got rid of a lot of other unused stuff. There's a big garbage TODO here, I'll fix that in the next change.
Test Plan:
- Grepped for `dateTouched`.
- Grepped for `participantCursor`.
- Grepped for `ConpherenceParticipantQuery::LIMIT`.
- Looked for callsites to `setOrder()`, found none.
- Added a message to an older thread, saw it bump up to the top.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17731
Summary:
Pathway to D17685. This column is a very complicated cache of: is participant.messageCount equal to thread.messageCount?
We can just ask this question with a JOIN instead and simplify things dramatically.
Test Plan:
- Ran migration.
- Browsed around.
- Sent a message, saw unread count go up.
- Read the message, saw unread count go down.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17730
Summary: Pathway to D17685. Nothing reads this field and it has no use or value.
Test Plan:
- Ran migration.
- Grepped for `behindTransactionPHID`.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17729
Summary: A few more mp3s to choose from for Conpherence.
Test Plan: Test each sound in a new room.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17734
Summary: Ref T7567. This adds some constants (for adding new sounds), global setting for turning on and off sound (setting) and per thread preference for sound choice. Also specc'd out Mentions, if added.
Test Plan: I tested all the preference wiring, but need to set up notifications locally to verify if this works. Feel free to test.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: amckinley, Korvin
Maniphest Tasks: T7567
Differential Revision: https://secure.phabricator.com/D17726
Summary:
Fixes T12596. A query for a token (like "having") which stems to a stopword (like "have") currently survives filtering. Stem it first so it gets caught.
Also, for InnoDB, a custom stopword table can be configured. If it is, read that instead of the default stopword list (I configured it locally, but the default list is reasonable so we never formally recommended installs configure it).
Test Plan:
Queried for words that stem to stopwords, saw them filtered:
{F4915843}
Queried for the original problem query and saw "having" caught with "have" in the stopword list:
{F4915844}
Fiddled with local InnoDB stopword table config and saw the stopword list get loaded correctly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12596
Differential Revision: https://secure.phabricator.com/D17728
Summary: Minor pixel shifts with new header ui in place.
Test Plan: Desktop, Mobile, Tablet, with and without search and participants open
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17725
Summary:
Ref T7567. In T8266 I fixed a bunch of obscure "Range" issues, but only for file downloads -- not for Celerity.
Extend all that stuff to Celerity, which is fortunately much easier.
I believe this will fix Conpherence sounds in Safari.
Test Plan:
- Wrote out an HTTP request in a text file with `Range: bytes=0-1` and similar, piped it to localhost with `cat request.txt | nc localhost 80`, saw server return appropriate range responses consistent with file behavior after T8266, which all seems to work.
- Also did that for files to try to make sure I wasn't breaking anything.
Reviewers: chad, amckinley
Reviewed By: chad
Maniphest Tasks: T7567
Differential Revision: https://secure.phabricator.com/D17724
Summary: Fixes T12587. Adds a new `PhabricatorFileDeleteTransaction` that enqueues `File` delete tasks.
Test Plan:
- hack `PhabricatorFileQuery` to ignore isDeleted state
- stop daemons
- upload a file, delete it from the UI
- check that the DB has updated isDeleted = 1
- check timeline rendering in `File` detail view
- start daemons
- confirm rows are deleted from DB
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, thoughtpolice
Maniphest Tasks: T12587
Differential Revision: https://secure.phabricator.com/D17723
Summary:
Ref T12566. Ref T12563. This fixes three bugs with Aphlict replay stuff:
First, Conphernece would try to repaint the UI even if no thread was open. Only repaint when a thread is open.
Second, although we deduplicate JX.Leader messages, we didn't deduplicate actual notification messages. If you browsed the leader window, then it re-elected itelf as a leader and replayed history, it could rebroadcast notifications and other windows could show doubles. Deduplicate notifications to prevent this.
Third, we always replayed the last 60 seconds of history. When you browsed the leader window, whichever window became the new leader (possibly the one you just browsed) could replay messages from before it had opened, leading to duplicate messages. Particularly, after receiving a message and then browsing you could see that message again. Instead, only replay history as far back as when the window first opened.
Test Plan:
- Clicked "Repaint" with a thread open, saw a repaint. Clicked "Repaint" with Conpherence open but no thread, no repaint and no 404 request to `/update/null/`.
- In browser A, opened three windows. In browser B, sent a notification. In browser A, browsed the leader window away twice in a row. Observed that the window which never became a leader doesn't duplicate notifications.
- In browser A, opened three windows. In browser B, sent a notification. In browser A, browsed the leader window away over and over again. Observed that replay requests issued with appropriate history windows.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12566, T12563
Differential Revision: https://secure.phabricator.com/D17722
Summary:
Deletion is a possibly time-intensive process, especially with large
files that are backed by high-latency, chunked storage (such as
S3). Even ~200mb objects take minutes to delete, which makes for an
unhappy experience. Fixes T10828.
Test Plan:
Delete a large file, and stare in awe of the swiftness with
which I am redirected to the main file application.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: thoughtpolice, Korvin
Maniphest Tasks: T10828
Differential Revision: https://secure.phabricator.com/D15743
Summary: Fixes T12579. Unclear why the user ran this command.
Test Plan: Ran with `--id cat`. Ran with `--id 123`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12579
Differential Revision: https://secure.phabricator.com/D17719
Summary: Ensures that newly-made `File` objects get indexed into the new ngrams index. Fixes T8788.
Test Plan:
- uploaded a file with daemons stopped; confirmed no new rows in ngrams table
- started daemons; confirmed indexing of previously-uploaded files happened
- uploaded a new file with daemons running; confirmed it got added to the index
Not sure how to test the changes to `PhabricatorFileUploadSource->writeChunkedFile()` and `PhabricatorChunkedFileStorageEngine->allocateChunks()`. I spent a few minutes trying to find their callers, but the first looks like it requires a Diffusion repo and the 2nd is only accessible via Conduit. I can test that stuff if necessary, but it's such a small change that I'm not worried about it.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T8788
Differential Revision: https://secure.phabricator.com/D17718
