Summary:
Ref T4361. Before we figure out which To/CC are addressable, try to expand To/CC. Specifically, the supported expansion right now is project PHIDs expanding to all their members.
Because of the way multiplexing works, we have to do this in two places: explicitly in `multiplexMail()`, and when sending mail that wasn't multiplexed. This is messy; eventually we can get rid of it (after ApplicationTransactions are everywhere).
This has some rough edges, but should basically give us what we need to make stuff like projects mailable. Particularly, it deals with most issues in D7436:
- I got around the resolution/multiplexing issue by resolving aggregate mailables separately from mailable actors.
- We get to keep the Project PHID as a To/CC/Reviewer/Whatever until the last second.
- Users won't get two emails for being a CC and also a member of a CC'd project.
- We can degrade to the list stuff this way if we want, by having the project aggregate yield a single list PHID.
Test Plan: Added a comment to a revision with a project reviewer, got mail to all the project's members.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4361
Differential Revision: https://secure.phabricator.com/D8117
Summary:
Ref T156. @vlada recently implemented filename search in Diffusion, this cleans up the UI a little bit:
- Instead of showing one search box with two different buttons, let the submit buttons appear to the right of the text boxes and separate the search modes.
- Clean up the results a little bit (don't show columns which don't exist).
Test Plan: {F107260}
Reviewers: vlada, btrahan, chad
Reviewed By: chad
CC: vlada, chad, aran
Maniphest Tasks: T156
Differential Revision: https://secure.phabricator.com/D8125
Summary:
Ref T156. Adds basic filename search support for Diffusion,
currently only for Git repositories.
This is preliminary, and it's up for discussion:
- is the UI in the right place;
- what should the search query syntax be (e.g. whether
to put `*`s in the beginning and end of it);
- how to best approach it for Mercurial and/or SVN;
- what's the cleanest result format for `lsquery` (I went
for the minimum necessary change to `DiffusionBrowseSearchController`).
Test Plan:
Browse to a repository in Diffusion, and use both
`Search File Names` and `Search File Content`.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T156
Differential Revision: https://secure.phabricator.com/D8093
Summary:
Fixes T4358. User request from IRC, but I think this is generally reasonable.
Although we can not prevent users from determining that other user accounts exist in the general case, it does seem reasonable to restrict browsing the user directory to a subset of users.
In our case, I'll probably do this on `secure.phabricator.com`, since it seems a little odd to let Google index the user directory, for example.
Test Plan: Set the policy to "no one" and tried to browse users.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4358
Differential Revision: https://secure.phabricator.com/D8112
Summary: Similar to D8110, but for Pholio. Also an IRC user request.
Test Plan: Set setting to something unusual, created a new mock.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D8111
Summary: Ref T3116. User request / generally modern feature.
Test Plan: Set defaults to whacky projects and created a new document; it defaulted appropriately.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, allan.laal
Maniphest Tasks: T3116
Differential Revision: https://secure.phabricator.com/D8110
Summary:
Ref T3583. General idea here is:
- Users will be able to create `DashboardPanel`s, which are things like the jump nav, or a minifeed, or recent assigned tasks, or recent tokens given, or whatever else.
- The `DashboardPanel`s can be combined into `Dashboard`s, which select specific panels and arrange them in some layout (and maybe have a few other options eventually).
- Then, you'll be able to set a specific `Dashboard` for your home page, and maybe for project home pages. But you can also use `Dashboard`s on their own if you just like dashboards.
My plan is pretty much:
- Put in basic infrastructure for dashboards (this diff).
- Add basic create/edit (next few diffs).
- Once dashboards sort of work, do the homepage integration.
This diff does very little: you can't create dashboards or panels yet, and thus there are no dashboards to look at. This is all skeleton code, pretty much.
IMPORTANT: We need an icon bwahahahahaha
Test Plan:
omg si purrfect
{F106367}
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3583
Differential Revision: https://secure.phabricator.com/D8109
Summary:
Ref T3623. This is like a pre-v0, in that it doesn't have a dropdown yet.
Clicking the button takes you to a page which can serve as a right click / mobile / edit target in the long run, but is obviously not great for desktop use. I'll add the dropdown in the next iteration.
Test Plan: {F105631}
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T3623
Differential Revision: https://secure.phabricator.com/D8088
Summary:
Fixes T4344. `diffusion.getcommits` is nasty old bad news. Implement a modern query method.
This method provides limit/paging in a somewhat abstract way so it's sort of ultramodern, but I didn't want the default behavior to return a million rows. I'll probably move more stuff toward this over time, now that cursor paging is pervasive. Here, we needed extra metadata (the identifier map) anyway.
Test Plan: Used console to execute command.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4344
Differential Revision: https://secure.phabricator.com/D8077
Summary: Ref T3979. Currently, the home page lives in an old application called "directory" and is informally defined. Make it a real application called "Home", with a formal definition. It isn't launchable and can't be uninstalled.
Test Plan: Loaded home, saw exact same stuff.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T3979
Differential Revision: https://secure.phabricator.com/D8074
Summary:
Ref T4338. Currently, there's no diagnostic command to execute mirroring (so I can't give users an easy command to run), and it's roughly the last piece of real logic left in the PullLocal daemon.
Separate mirroring out, and provide `bin/repository mirror`.
Test Plan:
- Ran `bin/repository mirror` to mirror a repository.
- Ran PullLocalDaemon and verified it also continued mirroring normally.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4338
Differential Revision: https://secure.phabricator.com/D8066
Summary: Ref T4339. We have more magical cookie names than we should, move them all to a central location.
Test Plan: Registered, logged in, linked account, logged out. See inlines.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4339
Differential Revision: https://secure.phabricator.com/D8041
Summary:
Fixes T4143. This mitigates the "use a botnet to slowly try to login to every user account using the passwords '1234', 'password', 'asdfasdf', ..." attack, like the one that hit GitHub.
(I also donated some money to Openwall as a thanks for compiling this wordlist.)
Test Plan:
- Tried to register with a weak password; registered with a strong password.
- Tried to set VCS password to a weak password; set VCS password to a strong password.
- Tried to change password to a weak password; changed password to a strong password.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, chad
Maniphest Tasks: T4143
Differential Revision: https://secure.phabricator.com/D8048
Summary:
As you've suggested, I took the SendGrid code and massaged it until it played nice with Mailgun.
btw - unless I'm missing something, it appears that the SendGrid receiver lets you spoof emails (it performs no validation on the data received).
Test Plan: Opened a task with Mailgun. Felt great.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4326
Differential Revision: https://secure.phabricator.com/D7989
Summary: Ref T4327. Adds some basic tests to the Git parser for a set of common operations (add, change, move, copy, directory, symlink, propchange).
Test Plan: Ran unit tests.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4327
Differential Revision: https://secure.phabricator.com/D8012
Summary:
Ref T4327. There are a bunch of other probably-related tasks too, some linked there.
We have some rare/unusual bugs in the change parsers, mostly in Subversion, but it's terrifying to touch them because they're complicated and fragile and have no test coverage.
To fix this stuff, I want to make them more testable. In particular, they basically end with this big INSERT right now. Instead, I'm going to make them return objects representing the data to be inserted, then have the common infrastructure do the insert. This gives us two benefits:
- Reduced code duplication on the insert;
- we can stop before the insert and have unit tests examine the objects.
This swaps the Git parser over, but doesn't swap the hg/svn parsers yet. I'll do those separately, the SVN one looks a bit tricky.
Test Plan:
- Used `scripts/repository/reparse.php` to reparse a Git commit, with `--trace`. Verified it looked the same as before and the SQL that was executed seemed reasonable.
- Did the same for `hg` / `svn` commits, to make sure I didn't derp anything. These aren't expected to do anything differently.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4327
Differential Revision: https://secure.phabricator.com/D7980
Summary:
Ref T4327. This is general cleanup since I was in this area of the code. Primarily, the Mercurial implementation here was completely broken and wrong:
- It returned only one branch, but a commit can be present on many branches.
- It did not account for multiple branch heads.
- It returned a result implying the branch head pointed at the queried commit, which is no consistent or accurate.
Simplify the amount of API we're dealing with by collapsing this method into the very similar `diffusion.branchquery` method.
Test Plan: Looked at mercurial and git repositories and commits, branch information seemed correct.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4327
Differential Revision: https://secure.phabricator.com/D8003
Summary: Ref T4327. At some point these two very similar classes got introduced. Collapse `DiffusionBranchInformation` into the nearly identical `DiffusionRepositoryRef`, which enjoys slightly more generality and support.
Test Plan: Viewed branch overview and detail pages. Ran `repository refs` and `repository discover`. Grepped for removed symbols.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4327
Differential Revision: https://secure.phabricator.com/D8002
Summary:
Ref T4327. Consolidates and simplifies infrastructure:
- Moves Git discovery into DiscoveryEngine.
- Collapses a bunch of the Git and Mercurial code related to stream discovery.
- Removes all cach code from PullLocal daemon (it's no longer called).
- Adds basic unit tests for Git and Mercurial discovery.
Various cleanup:
- Makes GitStream and MercurialStream extend a common base.
- Improves performance of MercurialStream in some cases, by requiring fewer commits be output and parsed.
- Makes mirroring exceptions easier to debug.
- Fixes discovery of Mercurial repositories with multiple branch heads.
- Adds some missing `pht()`.
Test Plan:
I tested this fairly throughly because I think this phase is complete:
- Made new repositories in multiple VCSes and did full imports.
- Particularly, I reimported Arcanist to make sure that TODO was resolved. I think it was related to the toposort stuff.
- Pushed commits to multiple VCSes.
- Pushed commits to a non-close branch, then pushed a merge commit. Observed commits import initially as non-close, then get flagged for close.
- Started full daemons and resolved various minor issues that showed up in the daemon log until everything ran cleanly.
- Basically spent about 30 minutes banging on this in every way I could think of to try to break it. I found and fixed some minor stuff, but it seems solid.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4327
Differential Revision: https://secure.phabricator.com/D7987
Summary:
Ref T4327. I want to make change parsing testable; one thing which is blocking this is that the Git discovery process is still part of `PullLocal` daemon instead of being part of `DiscoveryEngine`. The unit test stuff which I want to use for change parsing relies on `DiscoveryEngine` to discover repositories during unit tests.
The major reason git discovery isn't part of `DiscoveryEngine` is that it relies on the messy "autoclose" logic, which we never implemented for Mercurial. Generally, I don't like how autoclose was implemented: it's complicated and gross and too hard to figure out and extend.
Instead, I want to do something more similar to what we do for pushes, which is cleaner overall. Basically this means remembering the old branch heads from the last time we parsed a repository, and figuring out what's new by comparing the old and new branch heads. This should give us several advantages:
- It should be simpler to understand than the autoclose stuff, which is pretty mind-numbing, at least for me.
- It will let us satisfy branch and tag queries cheaply (from the database) instead of having to go to the repository. We could also satisfy some ref-resolve queries from the database.
- It should be easier to extend to Mercurial.
This implements the basics -- pretty much a table to store the cursors, which we update only for Git for now.
Test Plan:
- Ran migration.
- Ran `bin/repository discover X --trace --verbose` on various repositories with branches and tags, before and after modifying pushes.
- Pushed commits to a git repo.
- Looked at database tables.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4327
Differential Revision: https://secure.phabricator.com/D7982
Summary: Ref T4327. Moves us one small step forward toward testable change parsers by separating out this unrelated logic from the PullLocal daemon. We will also probably want to run this logic so we can do remote path lookups to limit the role of Arcanist Projects in the future, which is why I made the URI type (here, only "git") a parameter rather than calling this a `GitURINormalizer` or something.
Test Plan:
- Ran unit tests.
- Ran `repository discover` on a correctly-configured remote repository.
- Ran `repository discover` on an incorrectly-configured remote, got an error message.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4327
Differential Revision: https://secure.phabricator.com/D7981
Summary: ...needs to add a LegalpadDocumentSignatureQuery class to get this done, which is also re-deployed everywhere we were issuing raw queries. Ref T3116.
Test Plan: viewed some signatures. Verified color and footer icons showed up how I wanted them to.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T3116
Differential Revision: https://secure.phabricator.com/D7986
Summary:
Ref T3116. This creates a policy rule where you can require a signature on a given legalpad document.
NOTE: signatures must be for the *latest* document version.
Test Plan: made a task have a custom policy requiring a legalpad signature. verified non-signers were locked out.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T3116
Differential Revision: https://secure.phabricator.com/D7977
Summary:
Ref T3720. Ref T4310. Currently, we limit the maximum number of concurrent sessions of each type. This is primarily because sessions predate garbage collection and we had no way to prevent the session table from growing fairly quickly and without bound unless we did this.
Now that we have GC (and it's modular!) we can just expire unused sessions after a while and throw them away:
- Add a `sessionExpires` column to the table, with a key.
- Add a GC for old sessions.
- When we establish a session, set `sessionExpires` to the current time plus the session TTL.
- When a user uses a session and has used up more than 20% of the time on it, extend the session.
In addition to this, we could also rotate sessions, but I think that provides very little value. If we do want to implement it, we should hold it until after T3720 / T4310.
Test Plan:
- Ran schema changes.
- Looked at database.
- Tested GC:
- Started GC.
- Set expires on one row to the past.
- Restarted GC.
- Verified GC nuked the session.
- Logged in.
- Logged out.
- Ran Conduit method.
- Tested refresh:
- Set threshold to 0.0001% instead of 20%.
- Loaded page.
- Saw a session extension ever few page loads.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4310, T3720
Differential Revision: https://secure.phabricator.com/D7976
Summary: This modularizes the rest of the GC submethods. Turned out there was nothing tricky.
Test Plan: Ran `bin/phd debug garbage` and got reasonable looking behavior and output.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7971
Summary:
The GC is a big block of hard-coded application GCs right now. Among other things, this means third parties can't tap into the infrastructure.
Modularize it into `GarbageCollector` classes. This implements only one to prove the new stuff works; I'll followup with the rest in the next diff or few depending on how much mess I run into.
Test Plan: Used `bin/phd debug garbage` to run the collector in debug mode, observed reasonable output and behavior.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7970
Summary: Adds "verified" and "secretKey" to Legalpad document signatures. For logged in users using an email address they own, things are verified right away. Otherwise, the email is sent a verification letter. When the user clicks the link the signature is marked verified.
Test Plan: signed the document with a bogus email address not logged in. verified the email that would be sent looked good from command line. followed link and successfully verified bogus email address
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran, asherkin
Maniphest Tasks: T4283
Differential Revision: https://secure.phabricator.com/D7930
Summary: Fixes T3857. Earlier work made this trivial and just left product questions, which I've answered by requiring the daemons to run on reasonable installs.
Test Plan: Ran `bin/search index` and `bin/search index --background`. Observed indexes write in the former case and tasks queue in the latter case. Commented with a unique string on a revision and searched for it a moment later, got exactly one result (that revision), verifying that reindexing works correctly.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3857
Differential Revision: https://secure.phabricator.com/D7966
Summary:
Currently, we try to mostly-kind-of-work if daemons aren't running (for example, we send mail in-process). I want to stop doing this. A major motivator is that `metamta.send-immediately` is confusing for a lot of users and frequently the cause of performance problems. Increasingly, functionality of applications depends on the daemons (Harbormaster, Drydock, Nuance all require daemons to do anything at all). They're also fairly stable/robust/well-tested and no reasonable install should be running without them.
This will let us simplify or remove some flags (like `metamta.send-immediately`) and simplify some other processes like search indexing.
Test Plan: Stopped daemons, loaded warnings, saw daemon warning. Started daemons, reloade, no warning.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3857
Differential Revision: https://secure.phabricator.com/D7964
Summary: Ref T4310. Ref T3720. Session operations are currently part of PhabricatorUser. This is more tightly coupled than needbe, and makes it difficult to establish login sessions for non-users. Move all the session management code to a `SessionEngine`.
Test Plan:
- Viewed sessions.
- Regenerated Conduit certificate.
- Verified Conduit sessions were destroyed.
- Logged out.
- Logged in.
- Ran conduit commands.
- Viewed sessions again.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4310, T3720
Differential Revision: https://secure.phabricator.com/D7962
Summary: Ref T4310. Ref T3720. Partly, this makes it easier for users to understand login sessions. Partly, it makes it easier for me to make changes to login sessions for T4310 / T3720 without messing anything up.
Test Plan: {F101512}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3720, T4310
Differential Revision: https://secure.phabricator.com/D7954
Summary: Add the 'Depends On' field to releeph requests. This will help the release engineers to be aware of the dependencies and make sure pick them altogether.
Test Plan: Check sandbox. This field shows up when a revision has some dependencies.
Reviewers: JoelB, lifeihuang, epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7946
Summary: Ref T1344. Makes requests to the server, which are received and ignored. Performs appropriate locking/unlocking/enabling/disabling on the client.
Test Plan: Dragged stuff around, saw it enable/disable/send correctly.
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1344
Differential Revision: https://secure.phabricator.com/D7943
Summary:
Ref T2015. Several fixes:
- `checkForCancellation()` no longer exists, and isn't relevant for resumable stops. Throw it away for now.
- Fix an issue where a build could pass even if the final step failed.
- `phlog()` exceptions so they show up in `bin/harbormaster` and the daemon logs.
- Write an exception log if a step fails.
- Add a "throw an exception" step to debug this stuff more easily.
Test Plan:
- Grepped for `checkForCancellation()`.
- Ran a failing build where the final step caused the failure.
- Observed `phlog()` in `bin/harbormaster` output.
- Observed log in web UI:
{F101168}
Reviewers: btrahan, hach-que
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7935
Summary: This adds in the create flow for the Project board columns on the super secret board page which totally doesn't do anything right now.
Test Plan:
1. Apply diff.
2. Go to super secret page.
3. Click link close to top with a way too long name.
4. Enter a name for the column.
5. Enjoy a new column briefly before realising you cannot remove it.
6. Stay happy!
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: tmaroschik, Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7925
Summary: Ref T2015. Allow configuration of default edit/view policies for blueprints. Add create policy. Remove administrative exception in policies.
Test Plan: Configured these settings and created (or, with a restrictive create setting, tried to create) blueprints.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7921
Summary: Ref T1049. Creates convenience actions at the Buildable level to stop, resume, or restart all builds.
Test Plan:
- Stopped all builds.
- Resumed all builds.
- Restarted all builds.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7899
Summary:
Ref T1049. Currently you can cancel a build, but now that we're tracking a lot more state we can stop, resume, and restart builds.
When the user issues a command against a build, I'm writing it into an auxiliary queue (`HarbormasterBuildCommand`) and then reading them out in the worker. This is mostly to avoid race messes where we try to `save()` the object in multiple places: basically, the BuildEngine is the //only// thing that writes to Build objects, and it holds a lock while it does it.
Test Plan:
- Created a plan which runs "sleep 2" a bunch of times in a row.
- Stopped, resumed, and restarted it.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, chad
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7892
Summary:
Ref T1049. Currently, the Harbormaster worker looks like this:
foreach (step) {
run_step(step);
}
This means steps can't ever be run in parallel. Instead, split it into two workers. The "Build" worker starts things off, and basically does:
update_build();
(We could theoretically do this in the original process because it should never take very long, but since there's a lock and it's a little bit complex it seemed cleaner to separate it.)
The "Target" worker runs an individual target (like a command, or an HTTP request, or whatever), then updates the build:
run_one_step(step);
update_build();
The new `update_build()` mechanism in `HarbormasterBuildEngine` does this, roughly:
figure_out_overall_status_of_all_steps();
if (build is done) { done(); }
if (build is fail) { fail(); }
foreach (step that is ready to run) {
queue_target_worker_for_step(step);
}
So, overall:
- The part of the code that updates Builds is completely separated from the part of the code that updates Targets.
- Targets can run in parallel.
Test Plan:
- Ran a bunch of builds via `bin/harbormaster build`.
- Ran a bunch of builds via web UI.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7890
Summary:
pretty simple. did the bare minimum in the editor, etc. to be able to create an item from the conduit console.
I put the work in the editor for initializing new values, rather than some initializeNewItem method, mainly because Items don't have policy directly but instead policy will be defined by the queue(s) the item is in. The editor is definitely going to host this work, so it felt like it might be better to do it this way in time...? anyway, easy to make an initializeNew method instead if you want to have that paradigm going all the time.
Test Plan: made an item from teh conduit console - success. verified errors for missing data as well
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7879
Summary:
Fixes T4264. Adds:
- New "Repository's projects" field to Herald pre-commit rules, so you can write global rules which act based on projects.
- Allows pre-ref/pre-content rules to bind to projects, and fire for all repositories in that project, so users with limited power can write rules which apply to many repositories.
- The pre-ref and pre-content classes were starting to share a fair amount of code, so I made them both extend an abstract base class.
Test Plan: Wrote new pre-ref and pre-content rules bound to projects, then pushed commits into repositories in those projects and not in those projects. The "repository projects" field populated, and the rules fired for repositories in the relevant projects.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4264
Differential Revision: https://secure.phabricator.com/D7883
Summary:
Repositories currently have a no-UI "shortcut" feature which is only used by Facebook (and I'm not sure it's even used). As implemented, this feature is policy-oblivious and kind of nonsensical. Throw it away.
I'm open to reimplementing this, but I want to see some level of interest in it before I do. The new implementation would add shortcuts to each repository, similar to how mirrors work. My original plan was to follow this up with such an implementation (it's half-implemented in my sandbox), but as I worked through it I'm not sure it's really valuable.
Test Plan: Browsed repository list, grep.
Reviewers: btrahan
Reviewed By: btrahan
CC: FacebookPOC, aran
Differential Revision: https://secure.phabricator.com/D7862
Summary:
Ref T4222. This fixes some issues with Phame's resource construction.
Phame requires a fully virtual resource source, and since I want to run wordpress templates unmodified some day I don't want to build resource maps for skins.
Move all the stuff that depends on resource lists being discoverable at build time to `CelerityPhysicalResources`, and only generate maps for subclasses.
The root `CelerityResources` can now construct virtual resources; construct a virtual resource for Phame and use it.
Test Plan: Off-domain blogs work correctly now. On-domain blogs with custom skins work correctly now.
Reviewers: btrahan, hach-que
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T4222
Differential Revision: https://secure.phabricator.com/D7873
Summary:
Ref T4222.
- Removes the old map and changes the CelerityResourceMap API to be entirely driven by the new map.
- The new map is about 50% smaller and organized more sensibly.
- This removes the `/pkg/` URI component. All resources are now required to have unique names, so we can tell if a resource is a package or not by looking at the name.
- Removes some junky old APIs.
- Cleans up some other APIs.
- Added some feedback for `bin/celerity map`.
- `CelerityResourceMap` is still a singleton which is inextricably bound to the Phabricator map; this will change in the future.
Test Plan:
- Reloaded pages.
- Verified packaging works by looking at generated includes.
- Forced minification on and verified it worked.
- Forced no-timestamps on and verified it worked.
- Rebuilt map.
- Ran old script and verified error message.
- Checked logs.
Reviewers: btrahan, hach-que
Reviewed By: hach-que
CC: chad, aran
Maniphest Tasks: T4222
Differential Revision: https://secure.phabricator.com/D7872
Summary:
Ref T4222. Moves us toward a more modern Celerity CLI, and moves map discovery into the classtree. This is a little bit bulky (and means you can't ship completely standalone celerity maps) but has the advantage of being completely standard, and we could subclass maps into an auto-discovering map later if we have a need for it.
This doesn't affect the existing Celerity stuff. I'm going to build the new stuff in parallel, and then swap us over at the end.
Test Plan: Ran `bin/celerity map`, got reasonable-looking output.
Reviewers: btrahan, hach-que
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T4222
Differential Revision: https://secure.phabricator.com/D7864
Summary: Currently we markup `rXabcd`, but not `rX` on its own. Mark these up as repository object names.
Test Plan: Typed `rPOEMS`, `rPOEMS1`, `rPOEMS139893189`, etc.
Reviewers: btrahan, dctrwatson
Reviewed By: btrahan
CC: aran, poop
Differential Revision: https://secure.phabricator.com/D7859
Summary:
Fixes T4242. It's currently possible to set nonsense defaults and create repositories with unintended policies, because policy configuration isn't part of creation. Instead:
- put a policy page into the creation workflow;
- require the selection of valid policies (i.e., prevent creating a repository you can't view / edit).
Test Plan:
- Created imported and hosted repositories, hit policy selection.
- Edited policies of existing repositories.
- Tried to set nonsense policies.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4242
Differential Revision: https://secure.phabricator.com/D7856
