Summary:
Ref T11589. Previously, when we failed to load database configuration we just continued anyway, in order to get to setup checks so we could raise a better error.
There was a small chance that this could lead to pages running in a broken state, where ONLY that connection failed and everything else worked. This was accidentally fixed by narrowing the exceptions we continue on in D16489.
However, this "fix" meant that users no longer got helpful setup instructions. Instead:
- Keep throwing these exceptions: it's bad to continue if we've failed to connect to the database.
- However, catch them and turn them into setup errors.
- Share all the setup code so these errors and setup check errors work the same way.
Test Plan:
- Intentionally broke `mysql.host` and `mysql.pass`.
- Loaded pages.
- Got good setup errors.
- Hit normal setup errors too.
- Put everything back.
- Swapped into cluster mode.
- Intentionally broke cluster mode, saw failover to readonly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11589
Differential Revision: https://secure.phabricator.com/D16501
Summary:
Ref T11589. This runs:
- preflight checks (critical checks: PHP version stuff, extensions);
- configuration;
- normal checks.
The PHP checks are split into critical ("bad version") and noncritical ("sub-optimal config").
I tidied up the extension checks slightly, we realistically depend on `cURL` nowadays.
Test Plan:
- Faked a preflight failure.
- Hit preflight check.
- Got expected error screen.
- Loaded normal pages.
- Hit a normal setup check.
- Used DarkConsole "Startup" tab to verify that preflight checks take <1ms to run (we run them on every page without caching, at least for now, but they only do trivial checks like PHP versions).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11589
Differential Revision: https://secure.phabricator.com/D16500
Summary:
Ref T11596. When exporting data from the Phacility cluster, we `bin/files migrate` data from S3 into a database dump on the `aux` tier.
With current semantics, this //moves// the data and destroys it in S3.
Add a `--copy` flag to //copy// the data instead. This leaves the old copy around, which is what we want for exports.
Test Plan:
- Ran `bin/files migrate` to go from `blob` to `disk` with `--copy`. Verified a copy was left in the database.
- Copied it back, verified a copy was left on disk (total: 2 database copies, 1 disk copy).
- Moved it back without copy, verified database was destroyed and disk was created (total: 1 database copy, 2 disk copies).
- Moved it back without copy, verified local disk was destroyed and blob was created (total: 2 datbabase copies, 1 disk copy).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11596
Differential Revision: https://secure.phabricator.com/D16497
Summary:
Ref T11589. Currently, initialization order is a bit tangled: we load configuration from the database, then later test if we can connect to the database.
Instead, I'm going to do: preflight checks ("PHP Version OK?", "Extensions installed?"), then configuration, then normal setup checks.
To prepare for this, flag core checks as "preflight" and add a setup panel to visually confirm that I didn't miss anything.
Test Plan: {F1803210}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11589
Differential Revision: https://secure.phabricator.com/D16499
Summary: For phabricator. Adds a Slack auth adapater and icon.
Test Plan:
Create a new Slack Application for login, generate id and secret. Activate login and registration for Slack. Create a new account with Slack credentials. Log out. Log in with Slack credentials. Set my avatar with Slack. Slack. Slack.
{F1802649}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16496
Summary:
Two minor issues that I caught in the log while fixing Phame permissions:
- We had a JS bug which would cause us to immediately generate two comment previews at the exact same time -- one for loading the page, and one for "switching to desktop". Instead, only generate the "switch to desktop" preview if we really switched to desktop from a different device layout.
- These two requests could end up reading/writing the VersionedDraft table at exactly the same time fairly often (e.g., after a comment submission, the page would load, send two preview requests at exactly the same time, and they'd race fairly reliably for me locally). If we do race, recover from the race.
Test Plan:
Submitted some Phame comments.
- No more error log errors about VersionedDraft keys.
- Saw only one preview request when loading the page instead of two.
Here's the specific stack trace I caught:
```
[Mon Sep 05 12:15:33.639930 2016] [:error] [pid 50608] [client 127.0.0.1:55278] [2016-09-05 14:15:33] EXCEPTION: (AphrontDuplicateKeyQueryException) #1062: Duplicate entry 'PHID-POST-fknnpzjnsdgc3rqobhst-PHID-USER-pr5rjpuilpfserepsd2k-13' for key 'key_object' at [<phutil>/src/aphront/storage/connection/mysql/AphrontBaseMySQLDatabaseConnection.php:314]
[Mon Sep 05 12:15:33.640801 2016] [:error] [pid 50608] [client 127.0.0.1:55278] arcanist(head=master, ref.master=9e82ef979e81), corgi(head=master, ref.master=5b9171222bc9), instances(head=stable, ref.master=485bc8128198, ref.stable=2983bc917601), ledger(head=master, ref.master=4da4a24b8779), libcore(), phabricator(head=phame2, ref.master=4b6da9735ba7, ref.phame2=4b6da9735ba7), phutil(head=stable, ref.master=97f05269fdb1, ref.stable=c14343ee620e), services(head=stable, ref.master=1fcb5cdb7582, ref.stable=2d8088a5b4b3)
[Mon Sep 05 12:15:33.640815 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #0 <#2> AphrontBaseMySQLDatabaseConnection::throwCommonException(integer, string) called at [<phutil>/src/aphront/storage/connection/mysql/AphrontBaseMySQLDatabaseConnection.php:348]
[Mon Sep 05 12:15:33.640830 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #1 <#2> AphrontBaseMySQLDatabaseConnection::throwQueryCodeException(integer, string) called at [<phutil>/src/aphront/storage/connection/mysql/AphrontBaseMySQLDatabaseConnection.php:289]
[Mon Sep 05 12:15:33.640833 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #2 <#2> AphrontBaseMySQLDatabaseConnection::throwQueryException(mysqli) called at [<phutil>/src/aphront/storage/connection/mysql/AphrontBaseMySQLDatabaseConnection.php:185]
[Mon Sep 05 12:15:33.640836 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #3 <#2> AphrontBaseMySQLDatabaseConnection::executeRawQuery(string) called at [<phutil>/src/xsprintf/queryfx.php:8]
[Mon Sep 05 12:15:33.640839 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #4 <#2> queryfx(AphrontMySQLiDatabaseConnection, string, string, string, array, string)
[Mon Sep 05 12:15:33.640841 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #5 <#2> call_user_func_array(string, array) called at [<phutil>/src/aphront/storage/connection/AphrontDatabaseConnection.php:42]
[Mon Sep 05 12:15:33.640844 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #6 <#2> AphrontDatabaseConnection::query(string, string, string, array, string) called at [<phabricator>/src/infrastructure/storage/lisk/LiskDAO.php:1261]
[Mon Sep 05 12:15:33.640846 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #7 <#2> LiskDAO::insertRecordIntoDatabase(string) called at [<phabricator>/src/infrastructure/storage/lisk/LiskDAO.php:1106]
[Mon Sep 05 12:15:33.640849 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #8 <#2> LiskDAO::insert() called at [<phabricator>/src/infrastructure/storage/lisk/LiskDAO.php:1075]
[Mon Sep 05 12:15:33.640851 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #9 <#2> LiskDAO::save() called at [<phabricator>/src/applications/draft/storage/PhabricatorVersionedDraft.php:65]
[Mon Sep 05 12:15:33.640854 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #10 <#2> PhabricatorVersionedDraft::loadOrCreateDraft(string, string, integer) called at [<phabricator>/src/applications/transactions/editengine/PhabricatorEditEngine.php:1669]
[Mon Sep 05 12:15:33.640857 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #11 <#2> PhabricatorEditEngine::buildCommentResponse(PhamePost) called at [<phabricator>/src/applications/transactions/editengine/PhabricatorEditEngine.php:894]
[Mon Sep 05 12:15:33.640859 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #12 <#2> PhabricatorEditEngine::buildResponse() called at [<phabricator>/src/applications/phame/controller/post/PhamePostEditController.php:60]
[Mon Sep 05 12:15:33.640862 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #13 <#2> PhamePostEditController::handleRequest(AphrontRequest) called at [<phabricator>/src/aphront/configuration/AphrontApplicationConfiguration.php:237]
[Mon Sep 05 12:15:33.640865 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #14 phlog(AphrontDuplicateKeyQueryException) called at [<phabricator>/src/aphront/handler/PhabricatorAjaxRequestExceptionHandler.php:27]
[Mon Sep 05 12:15:33.640868 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #15 PhabricatorAjaxRequestExceptionHandler::handleRequestException(AphrontRequest, AphrontDuplicateKeyQueryException) called at [<phabricator>/src/aphront/configuration/AphrontApplicationConfiguration.php:644]
[Mon Sep 05 12:15:33.640870 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #16 AphrontApplicationConfiguration::handleException(AphrontDuplicateKeyQueryException) called at [<phabricator>/src/aphront/configuration/AphrontApplicationConfiguration.php:242]
[Mon Sep 05 12:15:33.640873 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #17 AphrontApplicationConfiguration::processRequest(AphrontRequest, PhutilDeferredLog, AphrontPHPHTTPSink, MultimeterControl) called at [<phabricator>/src/aphront/configuration/AphrontApplicationConfiguration.php:149]
[Mon Sep 05 12:15:33.640879 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #18 AphrontApplicationConfiguration::runHTTPRequest(AphrontPHPHTTPSink) called at [<phabricator>/webroot/index.php:17]
```
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D16494
Summary:
Fixes T11584. This controller does unnecessary CAN_EDIT policy checks.
These checks are enforced by `EditEngine`, and you can make certain types of edits (including comments) even without full-blown edit permission.
Test Plan:
- Commented as a user without edit permission.
- Tried to edit as a user without edit permission, was rebuffed with a policy dialog.
- Edited as a user with edit permission.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11584
Differential Revision: https://secure.phabricator.com/D16493
Summary:
Fixes T11590. Currently, we incorrectly consider cluster repository versions that are (or were) on devices which are no longer part of the active cluster service when building this status screen.
Instead, ignore them. This is just a display bug; the actual `ClusterEngine` already had similar logic.
Test Plan:
- Added a bad leader record to `repository_workingcopyversion`.
- Before patch, got a bad "Partial (1w)" sync:
{F1802292}
- After patch, got a good "Sycnchronized":
{F1802293}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11590
Differential Revision: https://secure.phabricator.com/D16492
Summary: Ref T11132, swaps in new UI for welcome page using guide modules
Test Plan: Test instance and non instance guides. Test each setting. Unclear on how to test people / Phacility. Just change the URL link?
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11132
Differential Revision: https://secure.phabricator.com/D16482
Summary:
This is hacky, and I'm not sure I'm happy with it; Until T9365 is done, this will show up
broken tests with an appropriate star in the Revision History.
Test Plan: Created 1M messages in a couple of old diffs in a revision. The query took ~80us (On SSD drive).
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D16483
Summary:
Ref T10867 for original use case. This workflow provides a plausible way for administrators to stop the daemons when performing upgrades or maintenance, then bring those daemons back up without resulting in the failure of builds that were running at the time.
On our organization's phab install, builds are running 24/7. The majority of these builds last for at least several minutes, and contain build steps which fail if interrupted and then resumed, as happens when turning daemons on and off.
Instead of allowing these build steps to resume execution as normal, this workflow will instruct active builds to restart their entire build process instead of just resuming whichever step they were on.
Test Plan:
contrived a build plan which would fail if resumed partway through:
- lease a working copy
- command `touch restart_{build.id}`
- command `test -e restart_{build.id} && rm restart_{build.id} && sleep 60`
followed old procedure:
- run a few of these builds manually
- `./bin/phd stop`
- `./bin/phd start`
- saw the builds fail
followed new procedure:
- run a few of these builds manually
- `./bin/phd stop`
- `./bin/harbormaster restart --active`
- `./bin/phd start`
- saw the builds pass
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Maniphest Tasks: T10867
Differential Revision: https://secure.phabricator.com/D16485
Summary:
* Fixed conveted => converted
Ref T11576
Test Plan: * Looked at a page, where somebody converted an AllDay Event to a normal one
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Tags: #calendar
Maniphest Tasks: T11576
Differential Revision: https://secure.phabricator.com/D16488
Summary: Ref T11575. After D16431, the parser may return arrays.
Test Plan: Ran `bin/diviner generate --clean` in `phabricator/` without errors. Previously, this raised some parsing errors related to getting arrays where strings were expected.
Reviewers: chad, yelirekim, joshuaspence
Reviewed By: joshuaspence
Maniphest Tasks: T11575
Differential Revision: https://secure.phabricator.com/D16487
Summary:
Ref T7924. This:
- Adds support for remarkup block changes to Modular Transactions.
- Exposes remarkup changes from the Calendar event "Description" transaction.
This makes stuff like mentions and file embeds work properly.
Test Plan:
Mentioned a task in an event description, saw a mention appear on the task.
Uploaded a file to an event description, saw the file become "Attached" to the event.
(Neither of these worked properly before.)
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7924
Differential Revision: https://secure.phabricator.com/D16481
Summary: See T10746.
Test Plan: Fail one of several builds, run `./bin/harbormaster update`, see that Build Status is Failed.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, O14 ATC Monitoring, yelirekim
Maniphest Tasks: T10746
Differential Revision: https://secure.phabricator.com/D16480
Summary: Ref T11132. Adds a text panel to feed if no stories are present and the user is an admin. Seems ok-ish for 15 minutes. Happy to take content suggestions.
Test Plan: Make a new install, see panel. Log in as new user, don't see panel.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11132
Differential Revision: https://secure.phabricator.com/D16479
Summary: Splitting these up to re-use in Config as a stop gap.
Test Plan: Visit welcome, install, and quick start on guides app
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16478
Summary: Fixes T11569. This fixes a known bad `setIcon()`. I also looked for more calls to `setIcon()` without success, and stubbed `setIcon()` so we're in good shape even if more exist.
Test Plan:
- Grepped for `setIcon(` and manually inspect all 1,004 callsites to look for calls on `PHUIObjectItemView` objects.
- Grepped for "high risk" callsites (`setIcon` in file after `PHUIObjectItemView`) and re-examined them. I identified these files with this command:
```
git ls-tree -r --name-only HEAD | xargs pcregrep -i -M -H -c --files-with-matches -o 'PHUIObjectItemView(.|\n)*setIcon'
```
There might be some more clever way to do that.
- Since this only identified the callsites I already knew about and I don't have a ton of confidence that I didn't miss any, I put a stub in place that logs a deprecation warning. I'll file a followup to go clean these up in a month or so if the logs are clean.
- Loaded Nuance, saw it work but warn.
- Changed Nuance to use `setStatusIcon()`, loaded Nuance, no more fatal.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11569
Differential Revision: https://secure.phabricator.com/D16477
Summary: This adds status icons, locked, hidden, editable, customized, to the list of options in config. Makes it easier to read and assertain state.
Test Plan:
View a hidden, customized, editable, and locked.
{F1796320}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16475
Summary: Fixes T10679. Added a 'short url' field to the phurl link page and changed the "view url" button to link to the shortened version
Test Plan: Create a phurl link (or navigate to an existing one) and note that there is now a field for "Short URL". Also verified that the "Visit URL" button in the top right still works as intended
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley, yelirekim
Maniphest Tasks: T10679
Differential Revision: https://secure.phabricator.com/D16473
Summary:
Fixes T11555. Previously changing the extension of a paste wouldn't change the syntax highlight language. Now it does.
Also, feed items involving autodetect weren't rendering in a readable way.
Test Plan: Created a paste named `paste.php` and let it autodetect language. Then edited the paste to be named paste.rainbow. It should now be highlighted in raiinnboow
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley, yelirekim
Maniphest Tasks: T11555
Differential Revision: https://secure.phabricator.com/D16474
Summary: Ref T11559. This makes managing large numbers of repositories slightly easier.
Test Plan: {F1796119}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11559
Differential Revision: https://secure.phabricator.com/D16472
Summary: Fixes T11556. This was just missing an `implements ...`, which became necessary at some point even for classes that don't use much of the beahvior (ModularTransactions?).
Test Plan: Created a new test payment provider on a Phortune merchant.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11556
Differential Revision: https://secure.phabricator.com/D16471
Summary: Fixes T11541. `PhabricatorApplication::getIconURI()` has been returning only null for a while (I assume in preparation to remove it). I removed the method and all the remaining call sites.
Test Plan: Removed the method and then clicked around. Things didn't explode!
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, yelirekim
Maniphest Tasks: T11541
Differential Revision: https://secure.phabricator.com/D16470
Summary: Previously we collapsed all table search results, but the new UI doesn't need it. Remove unused methods and fix CSS.
Test Plan: Legalpad Signatures, Phortune Accounts.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16469
Summary: Fixes T11532. The language selection for pastes is now a typeahead that is backed by `pygments.dropdown-choices`. There is still a bit of weirdness around making "auto-detection" the default state. To actually select a different language, you first need to remove the "auto detect" option that is pre-populated in a new paste. Other than that, it works as intended.
Test Plan:
Create a new paste with a file extension that can be auto-detected.
Created a new paste and manually selected the language
Edited a paste and changed the language.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley, yelirekim
Maniphest Tasks: T11532
Differential Revision: https://secure.phabricator.com/D16463
Summary: Ref T11132, significantly cleans up the Config app, new layout, icons, spacing, etc. Some minor todos around re-designing "issues", mobile support, and maybe another pass at actual Group pages.
Test Plan: Visit and test every page in the config app, set new items, resolve setup issues, etc.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam, Korvin
Maniphest Tasks: T11132
Differential Revision: https://secure.phabricator.com/D16468
Summary: Ref T11132. This gets rid of the red bar for admins and instead shows a new menu item next to notifications/chat if there are unresolved configuration issues. Menu goes away if there are no issues. May move this later into the bell icon, but think think might be the right place to start especially for NUX and updates. Maybe limit the number of items?
Test Plan:
Tested with some, lots, and no config issues.
{F1790156}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11132
Differential Revision: https://secure.phabricator.com/D16461
Summary: I plan to reuse these styles with Config, maybe also Almanac, etc.
Test Plan: Review /guides/, see same styles.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16467
Summary:
Fixes T10423. Ref T11524. This changes `diffusion.rawdiffquery` to return a file PHID instead of a blob of data.
This is better in general, but particularly better for huge diffs (as in T10423) and diffs with non-utf8 data (as in T10423).
Test Plan:
- Used `bin/differential extract` to extract a latin1 diff, got a clean diff.
- Used `bin/repository reparse --herald` to rerun herald on a latin1 diff, got a clean result.
- Pushed latin1 diffs to test commit hooks.
- Triggered the the too large / too slow logic.
- Viewed latin1 diffs in Diffusion.
- Used "blame past this change" in Diffusion to hit the `before` logic.
Reviewers: chad
Reviewed By: chad
Subscribers: eadler
Maniphest Tasks: T10423, T11524
Differential Revision: https://secure.phabricator.com/D16460
Summary:
Ref T11524. Ref T10423. Earlier, I converted `diffusion.filecontentquery` to put the actual file content in Files, then return a PHID for the file, instead of trying to send the content over Conduit.
In T11524, we have a similar set of problems with diffs that contain non-UTF8 data (and, in T10423, diffs that are simply enormous).
I want to provide an API method to do the same sort of thing with diff output (like from `git diff`), so we call the method, it shoves the data in Files, and then we go pull it out of Files.
To support this, take the "shove the output of a Future into Files" logic and put it in a new base `FileFuture` query. This will let me make `RawDiffQuery` share the logic more easily.
Test Plan: Browsed Diffusion, ran `diffusion.filecontentquery` to fetch file content.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10423, T11524
Differential Revision: https://secure.phabricator.com/D16458
Summary: Fixes T11513. Previously the selector was just a giant dropdown which was just... just too much. Now there's a handy typeahead.
Test Plan:
Happy Path:
Go to `Settings -> Home Page -> Pin Application`, start typing in the form then select one of the options. Click on "Pin Application". The application should now be in the list.
Other paths:
- Type nothing into the box and submit, nothing should happen.
- Choose an application that is already pinned. The list should stay the same.
- Type nonsense into the box and submit, nothing should happen.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: chad, Korvin, epriestley, yelirekim
Maniphest Tasks: T11513
Differential Revision: https://secure.phabricator.com/D16459
Summary:
Fixes T11537. See that task for discussion.
Although we could accommodate these faithfully, it requires a huge migration and affects one repository on one install which was written with buggy tools.
At least for now, just replace out-of-32-bit-range epoch values with the current time, which is often somewhat close to the real value.
Test Plan:
- Following the instructions in T11537, created commits in 40,000 AD.
- Tried to import them, reproducing the "epoch" database issue.
- Applied the patch.
- Successfully imported future-commits, with some liberties around commit dates. Note that author date (not stored in an `epoch` column) is still shown faithfully:
{F1789302}
Reviewers: chad, avivey
Reviewed By: avivey
Maniphest Tasks: T11537
Differential Revision: https://secure.phabricator.com/D16456
Summary:
Fixes T9235. When the stars align, PHP 5.6 or newer emits a deprecation warning on startup about "always_populate_raw_post_data" which occurs too early for us to intercept and can break responses by adding garbage to the output.
These settings appear to be sufficient:
```
always_populate_raw_post_data = 1
display_errors = 1
display_startup_errors = 1
error_reporting = -1
```
Then make a request with an unusual content type:
```
$ curl -X POST -H "Content-Type: application/json" -d "{foo: bar}" http://phabricator.example.com/
```
This triggers the warning:
```
<br />
<b>Deprecated</b>: Automatically populating $HTTP_RAW_POST_DATA is deprecated and will be removed in a future version. To avoid this warning set 'always_populate_raw_post_data' to '-1' in php.ini and use the php://input stream instead. in <b>Unknown</b> on line <b>0</b><br />
<br />
...
```
To avoid this, just instruct administrators to set this value to "-1", which completely disables the feature and silences the warning.
Test Plan:
- Reproduced this issue by following the instructions above.
- Triggered the setup issue locally and read all the captivating prose:
{F1786911}
- Made the configuration change it directed me to, saw the setup issue resolve.
Reviewers: jcox
Reviewed By: jcox
Maniphest Tasks: T9235
Differential Revision: https://secure.phabricator.com/D16454
Summary: Ref T11132. This is a new default default (no dashboard) homepage. It offers (Diffs) (Tasks) (Repositories) in the main column and (Feed) in the side column. No NUX stuff, No logged out public view (upcoming diff). This should be complete, but unclear how to bucketize Differential.
Test Plan: Test new account's default homepage.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11132
Differential Revision: https://secure.phabricator.com/D16449
Summary: Ref T8628. Updates people controllers for handleRequest
Test Plan: Viewed the people list, viewed the activity logs, then went through the approval process for a new user account.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, yelirekim
Maniphest Tasks: T8628
Differential Revision: https://secure.phabricator.com/D16451
Summary: Fixes T8850. Previously, if a user's preamble script mangled `$_SERVER['REMOTE_ADDR']` or somehow set it to `null`, the user would get errors when performing certain actions. Now those errors shouldn't occur, and instead the user will be warned that there is a setup issue related to their preamble script.
Test Plan: Create a preamble script that contains `$_SERVER['REMOTE_ADDR'] = null;` then navigate to /config/issue/. There should be a warning there about `REMOTE_ADDR` not being available.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, yelirekim, epriestley
Maniphest Tasks: T8850
Differential Revision: https://secure.phabricator.com/D16450
Summary: Ref T10951. This adds the application name as an attribute below the document type in the UI for doc type search.
Test Plan: Verify that the application name appears as an attribute on the document type results.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Maniphest Tasks: T10951
Differential Revision: https://secure.phabricator.com/D16446
Summary: Ref T10951. This diff removes uninstalled applications from the result set for DocumentType restults
Test Plan: Uninstall an application (diviner for example), then go to the document type search menu and ensure that the uninstalled application doesn't show up.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Maniphest Tasks: T10951
Differential Revision: https://secure.phabricator.com/D16445
Summary: Fixes T10999. Now MFA will be required for all email address related operations.
Test Plan: Ensure that adding and removing email addresses now requires you to enter high security mode.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Maniphest Tasks: T10999
Differential Revision: https://secure.phabricator.com/D16444
Summary: These were blank, from last week's shenanigans.
Test Plan: View homepage settings, see icons.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16447
Summary:
Ref T11522. This tries to reduce the cost of rewriting a repository by making handles smarter about rewritten commits.
When a handle references an unreachable commit, try to load a rewrite hint for the commit. If we find one, change the handle name to "OldHash > NewHash" to provide a strong hint that the commit was rewritten and that copy/pasting the old hash (say, to the CLI) won't work.
I think this notation isn't totally self-evident, but users can click it to see the big error message on the page, and it's at least obvious that something weird is going on, which I think is the important part.
Some possible future work:
- Not sure this ("Recycling Symbol") is the best symbol? Seems sort of reasonable but mabye there's a better one.
- Putting this information directly on the hovercard could help explain what this means.
Test Plan: {F1780719}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11522
Differential Revision: https://secure.phabricator.com/D16437
Summary:
Ref T11522. When a commit is no longer reachable from any branch/tag, we currently show a "this has been deleted" message.
Instead, go further: check if there is a "rewritten" hint pointing at a commit the current commit was rewritten into. If we find one, show a message about that instead.
(This isn't super pretty, just getting it working for now. I expect to revisit this UI in T9713 if we don't get to it before that.)
Test Plan: {F1780703}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11522
Differential Revision: https://secure.phabricator.com/D16436
Summary: Ref T11522. This migrates any "badcommit" data (which probably only exists at Facebook and on 1-2 other installs in the wild) to the new "hint" table.
Test Plan:
- Wrote some bad commit annotations to the badcommit table.
- Viewed them in the web UI and used `bin/repository reparse --change ...` to reparse them. Saw "this is bad" messages.
- Ran migration, verified that valid "badcommit" rows were successfully migrated to become "hint" rows.
- Viewed the new web UI and re-parsed the change, saw "unreadable commit" messages.
- Viewed a good commit; reparsed a good commit.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11522
Differential Revision: https://secure.phabricator.com/D16435
Summary:
Ref T11522. This provides storage for tracking rewritten commits (new feature) and unreadable commits (existing feature, but really hacky).
This doesn't do anything yet, just adds a table and a CLI tool for updating it. I'll document the tool once it works. You just pipe in some JSON, but I need to document the format.
Test Plan:
- Piped JSON for "none", "rewritten" and "unreadable" hints into `bin/repository hint`.
- Examined the database to see that the table was written properly.
- Tried to pipe bad JSON in, invalid hint types, etc. Got reasonable human-readable error messages.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11522
Differential Revision: https://secure.phabricator.com/D16434
Summary: Getting rid of some code! This method has no callsites so it should be safe to remove completely. Ref T9690
Test Plan: Removed method and clicked around to make sure nothing broke.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: yelirekim, epriestley
Maniphest Tasks: T9690
Differential Revision: https://secure.phabricator.com/D16439
Summary: Adds a schema patch that removes conduit_connectionlog. This table hasn't been used in 8ish months so it's probably safe to get rid of.
Test Plan: Apply the patch locally and confirm that the table does indeed get dropped.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D16438
Summary: Removed call to the deprecated buildStandardPageResponse method from XHProfProfileController
Test Plan: Install, configure, and use XHProf. I'll need some guidance with this
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D16432
Summary:
After D16431, listing the same `@annotation` multiple times makes the docblock parser return a list.
We have some resources which list `@requires` or `@provides` several times, but don't handle the new parser properly. Make the code more flexible, since this is a reasonable way to specify the annotations.
See also D16432. This produces a failure in this form:
```
[2016-08-23 21:10:15] ERROR 2: trim() expects parameter 1 to be string, array given at [/core/data/drydock/workingcopy-74/repo/phabricator/src/applications/celerity/CelerityResourceMapGenerator.php:236]
2 arcanist(head=master, ref.master=89e8b4852384), phabricator(head=6c940fb71b0a8850c6a1b7f5fc642a8f8135a76a, ref.master=b521f2349e46), phutil(head=master, ref.master=237549280f08)
3 #0 trim(array) called at [<phabricator>/src/applications/celerity/CelerityResourceMapGenerator.php:236]
4 #1 CelerityResourceMapGenerator::getProvidesAndRequires(string, string) called at [<phabricator>/src/applications/celerity/CelerityResourceMapGenerator.php:193]
5 #2 CelerityResourceMapGenerator::rebuildTextResources(CelerityPhabricatorResources, CelerityResourceTransformer) called at [<phabricator>/src/applications/celerity/CelerityResourceMapGenerator.php:54]
6 #3 CelerityResourceMapGenerator::generate() called at [<phabricator>/src/__tests__/PhabricatorCelerityTestCase.php:16]
7 #4 PhabricatorCelerityTestCase::testCelerityMaps()
8 #5 call_user_func_array(array, array) called at [<arcanist>/src/unit/engine/phutil/PhutilTestCase.php:492]
9 #6 PhutilTestCase::run() called at [<arcanist>/src/unit/engine/PhutilUnitTestEngine.php:69]
10 #7 PhutilUnitTestEngine::run() called at [<arcanist>/src/unit/engine/ArcanistConfigurationDrivenUnitTestEngine.php:147]
11 #8 ArcanistConfigurationDrivenUnitTestEngine::run() called at [<arcanist>/src/workflow/ArcanistUnitWorkflow.php:167]
12 #9 ArcanistUnitWorkflow::run() called at [<arcanist>/scripts/arcanist.php:394]
```
Test Plan: Ran `bin/celerity map`, no more warnings and no change to the actual map.
Reviewers: joshuaspence, chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D16433
Summary: Added a brand new shiny cat fact
Test Plan: Pulled up a project with motivator installed and nothing broke
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D16430
Summary: Switches over to new property UI boxes, splits core and apps into separate pages. Move Versions into "All Settings". I think there is some docs I likely need to update here as well.
Test Plan: Click on each item in the sidebar, see new headers.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16429
Summary:
Ref T7148. The automated export process runs this via daemon, which can't answer "Y" to this prompt. Let it "--force" instead.
(Some of my test instances didn't have any repositories, which is why I didn't catch this sooner.)
Test Plan: Ran `bin/repository move-paths --force ...`, saw change applied without a prompt.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7148
Differential Revision: https://secure.phabricator.com/D16426
Summary: Ref T11132. Will work on CSS tomorrow, but wanted to rough in the UI Steps to get guidance. Not sure what you have in mind for the "app" part, if you want to explain it and I build or you build.
Test Plan: Visit each page and click on links. Very rough and unfinished.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11132
Differential Revision: https://secure.phabricator.com/D16419
Summary: Ref T11132. Adds a background color option to PHUIIconView, for use whereever, and NUX. Also normalize icon placement for mixed image/icon result list.
Test Plan: Test in UIExamples, and Global Settings.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11132
Differential Revision: https://secure.phabricator.com/D16424
Summary: Fixes T11493. This code is a little bit weird/clever, simplify it so that we always cast the handles to an array early on.
Test Plan: {F1767668}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11493
Differential Revision: https://secure.phabricator.com/D16422
Summary: Fixes T11501. Let's you pass in a full PHUIIconView or just the icon name to give ObjectListItem a large icon.
Test Plan: Alamanac, Applications, Drydock, Settings, Search Typeahead, Config page...
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T11501
Differential Revision: https://secure.phabricator.com/D16421
Summary: I don't think we use footicons, removing that CSS. States were added but only used in Auth, convert them to statusIcon instead.
Test Plan: Visit Auth, UIExamples, grep for `setState`
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16418
Summary: Ref T11132, Ref T11478. Builds out a basic PHUICMSView and Guides Application, no content / modules.
Test Plan: Go to /guides/, see blank states for new guides.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11132, T11478
Differential Revision: https://secure.phabricator.com/D16414
Summary:
Fixes T11488. I broke this in D16360, I think by doing a little extra refactoring after testing it.
This code is very old, before commits always needed to have repositories attached in order to do policy checks.
Modernize it by mostly just using the repository which is present on the Commit object, and using the existing edge cache.
Test Plan: Ran a commit through the Herald test adapter.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11488
Differential Revision: https://secure.phabricator.com/D16413
Summary:
Fixes T11480. This cleans up the error logs a little by quieting three common errors which are really malformed requests:
- The CSRF error happens when bots hit anything which does write checks.
- The "wrong cookie domain" errors happen when bots try to use the `security.alternate-file-domain` to browse stuff like `/auth/start/`.
- The "no phcid" errors happen when bots try to go through the login flow.
All of these are clearly communicated to human users, commonly encountered by bots, and not useful to log.
I collapsed the `CSRFException` type into a standard malformed request exception, since nothing catches it and I can't really come up with a reason why anything would ever care.
Test Plan:
Hit each error through some level of `curl -H ...` and/or fakery. Verified that they showed to users before/after, but no longer log.
Hit some other real errors, verified that they log.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11480
Differential Revision: https://secure.phabricator.com/D16402
Summary: This needs an `isset()` for cases when authority and packages don't completely overlap.
Test Plan:
- With a package set to trigger autoreview, created a revision.
- Observed error log, saw no more error.
- Saw package trigger autoreview properly.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D16398
Summary:
Ref T11473. If you write a method like `get_stuff(ids)` and then call it with an empty list of IDs, you can end up passing an empty constraint to Conduit.
If you run a `*.search` method with such a constraint, like this one:
```
{
"ids": []
}
```
...we have three possible beahviors:
# Treat it like the user passed no constraint (basically, ignore the constraint).
# Respect the constraint (return no results).
# Error.
Currently, we do (1). However, this is pretty confusing and I think clearly the worst option, since it means `get_stuff(array())` in client code will often tend to return a ton of results.
We could do (2) instead, but this is also sort of confusing (it may not be obvious why nothing matched, even though it's an application bug) and I think most reasonable client code should be doing an `if ($ids)` test: this test makes clients a little more complicated, but they can save a network call, and I think they often need to do this test anyway (for example, to show the user a different message).
This implements (3), and just considers these to be errors: this is the least tricky behavior, it's consistent with what we do in PHP, makes fairly good sense, and the only cost for this is that client code may need to be slightly more complex, but this slightly more complex code is usually better code.
Test Plan: Ran Conduit `*.search` queries with `"ids":[]` and `"phids":[]`, got sensible errors instead of runaway result sets.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11473
Differential Revision: https://secure.phabricator.com/D16396
Summary:
Ref T11473. When running `harbormaster.build.search` with a `buildables` constraint, the constraint doesn't get passed to the Query and so currently has no effect.
This piece of logic was just accidentally omitted from D16356. It is probably not used anywhere today and doesn't show up in the UI, so it's easy to overlook (I missed it in review, too).
Test Plan: Ran `harbormaster.build.search` with a `buildables` constraint, got expected filtering.
Reviewers: yelirekim, chad
Reviewed By: chad
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T11473
Differential Revision: https://secure.phabricator.com/D16395
Summary:
When I wrote this the first time, only hosted repositories could be clustered.
This check wasn't removed when I allowed observed repositories to be clustered in D15986.
Test Plan:
Reloaded {nav Config > Repository Servers} page, saw more stuff locally.
Reviewed the cardinal digits between 1 and 17, inclusive.
Reviewers: chad, avivey
Reviewed By: avivey
Differential Revision: https://secure.phabricator.com/D16392
Summary:
I converted this call incorrectly in D16092. We should pass the `PhutilURI` object, not the string version of it.
Specifically, this resulted in hitting an error like this if a replica needed synchronization:
```
[2016-08-11 21:22:37] EXCEPTION: (InvalidArgumentException) Argument 1 passed to DiffusionCommandEngine::setURI() must be an instance of PhutilURI, string given, called in...
#0 PhutilErrorHandler::handleError(integer, string, string, integer, array) called at [<phabricator>/src/applications/diffusion/protocol/DiffusionCommandEngine.php:52]
#1 DiffusionCommandEngine::setURI(string) called at [<phabricator>/src/applications/diffusion/protocol/DiffusionRepositoryClusterEngine.php:601]
...
```
Test Plan: Clusterized an observed repository, demoted a node, ran `bin/repository update Rxxx` to update, saw no typehint fatal.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D16390
Summary:
Fixes T11453. Currently, commit message summaries are limited to 80 bytes. This may only be 20-40 characters for CJK languages or langauges with Cyrillic script.
Increase storage size to 255, then truncate to the shorter of 255 bytes or 80 glyphs. This preserves the same behavior for latin languages, but is less tight for Russian, etc.
Some minor additional changes:
- Provide a way to ask "how much data fits in this column?" so we don't have to duplicate column lengths across summary checks or UI errors like "title too long".
- Remove the `text80` datatype, since no other columns use it and we have no use cases (or likely use cases) for it.
Test Plan:
- Made a commit with a Cyrillic title, saw reasonable summarization in UI:
{F1757522}
- Added and ran unit tests.
- Grepped for removed `SUMMARY_MAX_LENGTH` constant.
- Grepped for removed `text80` data type.
Reviewers: avivey, chad
Reviewed By: avivey
Subscribers: avivey
Maniphest Tasks: T11453
Differential Revision: https://secure.phabricator.com/D16385
Summary: Fixes T9410. Depends on D16382. Since all users can now view all Herald rules, we can link them in the transcripts.
Test Plan: Viewed a transcript, clicked rule names, reviewed rules.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9410
Differential Revision: https://secure.phabricator.com/D16383
Summary:
Ref T9410. This changes the view policy for all Herald rules to the most public policy ("All Users" for private installs, "Public" for public installs).
See T11428 for discussion of this change in greater detail. In practice, this is //approximately// how things work today anyway, since you can almost always see almost all of this information in transcripts.
I believe this narrower view policy is helpful in zero cases and slightly confusing or harmful in a number of reasonable cases.
Test Plan: Viewed personal, object and global rules as users who could and could not edit the rules.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9410
Differential Revision: https://secure.phabricator.com/D16382
Summary: Converts final call site to PHUIDocumentViewPro.
Test Plan: grep for PHUIDocumentView, view new Welcome Page
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16379
Summary: Fixes T11437. Provides a normal form for configuring this, instead of weird "look up the PHID and adjust things in the database" stuff.
Test Plan:
{F1753651}
{F1753652}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11437
Differential Revision: https://secure.phabricator.com/D16377
Summary:
This updates the eye logo and removes the formal wordmark "Phabricator" as an image. Instead we'll use the new updated eye logo and plain text for "Phabricator", both of which are more friendly and less industrial.
Installs that already use the `header-logo` customization setting will need to rebuild their logo to 80px x 80px. They will then also get to use plain text to whitebox their install as they see fit.
Test Plan:
Tested new logo at desktop, tablet, and mobile sizes. Set a random instance name, saw new wordmark. Created a really long wordmark of MMMMMMMMMMMM, saw text cut off so UI doesn't break. May need some additional tweaking, but I think we covered the most edge cases here.
{F1751791, size=full}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: edibiase, bjshively, yelirekim, Korvin
Maniphest Tasks: T4214, T11096
Differential Revision: https://secure.phabricator.com/D16373
Summary: Fixes T7939. This doesn't get too fancy, but allows you to write Herald rules against Calendar events.
Test Plan:
- Wrote an "add red flag to events with party in the name" rule.
- Created a "mundane meeting", didn't get flagged.
- Created a "cool party", got flagged.
- Ran rules from the Herald test console.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7939
Differential Revision: https://secure.phabricator.com/D16368
Summary: I find this fact very useful for understanding my feline companion
Test Plan: Added "Motivator: Cat Facts" to the project, nothing broke
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D16374
Summary: Makes sidenav disappear again on projects/profiles, but shows it on home again (tablet views).
Test Plan: Visit Profile/Projects/Home on mobile, desktop, and tablet. See nav disappear correctly.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16369
Summary: Fixes T11420. These are selected in newest-to-oldest order from the database, but we should show them in oldest-to-newest order in the UI.
Test Plan:
Tagged a couple tasks with "A, B, C" projects, saw correct order in UI:
{F1749351}
{F1749352}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11420
Differential Revision: https://secure.phabricator.com/D16367
Summary:
Fixes T9719. Currently, the Herald "Test Console" has a big `instanceof` thing, so new adapters (like a Calendar adapter, or third-party adapters) aren't available automatically. Instead, do a standard modular thing: load the available adapters, ask which ones can test the object the user selected, then let the user pick which one they want to move forward with.
Additionally, it isn't very clear that you can't test "commit hook" rules because they rely on push state which we don't really have a good way to simulate. When the user picks a commit, we now show them the "Hook" events, but the options are disabled and explain why they can not be selected.
Test Plan:
- Ran test rules for revisions, commits, mocks, tasks, wiki documents, questions, and outbound mail.
- Plugged in a commit, got a more-helpful choice screen explaining why you do a test run of hook rules.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9719
Differential Revision: https://secure.phabricator.com/D16360
phpexcel.net currently serves a 500 page, and the top Google hit for
PHPExcel (on codeplex) gives you a site warning you that it is 3 years
out of date, and to see GitHub instead.
Update the link from Maniphest's 'please install PHPExcel to enable
export' prompt.
Summary: This moves aphront-side-nav to use same table css display as profile nav. Slightly less code to support. Cleans up AppSearch UI, think I've gotten all the edge cases here, but bang on it, can hold until after release cut.
Test Plan: Config, Maniphest, Differential, Diffusion, Home.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16346
Summary: Fixes T11409. This syntax isn't compatible with older PHP.
Test Plan: Ran `arc lint` on the file.
Reviewers: yelirekim, chad
Reviewed By: chad
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T11409
Differential Revision: https://secure.phabricator.com/D16358
Summary: We deprecate the existing API method used to access build information from the API, but preserve its response structure after calling through to the new method. I've cordoned off the fields I needed to define in order to meet the output structure by putting those fields in a search attachment.
Test Plan:
Used the API console and looked at the list view controller for builds.
Old output structure:
```lang=json
{
"data": [
{
"id": "16823",
"phid": "PHID-HMBD-xghrwfz6luoye5rgc2hq",
"uri": "https://secure.phabricator.com/harbormaster/build/16823/",
"name": "Run Core Tests",
"buildablePHID": "PHID-HMBB-s6ykzm2jzxz4ymduztq3",
"buildPlanPHID": "PHID-HMCP-pcfxcgyoif67l3buc4zt",
"buildStatus": "passed",
"buildStatusName": "Passed"
}
],
"cursor": {
"limit": 100,
"after": "16823",
"before": null
}
}
```
New output structure:
```lang=json
{
"data": [
{
"id": 1,
"type": "HMBD",
"phid": "PHID-HMBD-qpgcmv67tzaauzayzit5",
"uri": "http://ec2-54-165-244-168.compute-1.amazonaws.com/harbormaster/build/1/",
"name": "arc lint + arc unit",
"buildStatusName": "Passed",
"buildablePHID": "PHID-HMBB-qdefith5uakkepqpjr2g",
"buildPlanPHID": "PHID-HMCP-zswbhazb7ipmaf4plygg",
"buildStatus": "passed",
"initiatorPHID": "PHID-USER-rihx4366f3aczsvc2wtb",
"dateCreated": 1450295643,
"dateModified": 1450295644,
"policy": {
"view": "users",
"edit": "users"
}
}
],
"maps": {},
"query": {
"queryKey": null
},
"cursor": {
"limit": 100,
"after": null,
"before": null,
"order": null
}
}
```
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D16356
Summary:
It's only natural for users to be interested their own builds. We are also building in support for other sources of builds, the only formally supported way to run a build right now is via Herald.
In our third party codebase, we designate an application as the "thing" that started builds which are scheduled and managed automatically by phabricator. I believe this is a common practice elsewhere in the codebase when you're at a loss for a real human identity and you need to apply some transactions.
Test Plan: Ran some builds manually and saw them show up under the list of things I've run. Looking up builds based on those that had been started by a herald rule.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D16353
Summary:
Ref T11404. Depends on D16351. Currently, both `differential.query` and `differential.revision.search` issue `2N` queries to fetch:
- dependencies for each revision; and
- projects for each revision.
Fix this:
- Take these custom fields out of Conduit so they don't load this data by default.
- For `differential.query`, put this data back in by hard coding it.
- For `differential.revision.search`, just leave it out. You can already optionally get projects efficiently, and this endpoint is a work in progress. I would tentatively be inclined to expose graph data as a "graph" extension once we need it.
This makes both methods execute in `O(1)` time (which is still 20-30 queries, but at least it's not 320 queries anymore).
Test Plan:
- Ran `differential.query`, observed no change in results but 199 fewer internal queries.
- Ran `differential.revision.search`, observed data gone from results and 200 fewer internal queries.
Reviewers: yelirekim, chad
Reviewed By: chad
Maniphest Tasks: T11404
Differential Revision: https://secure.phabricator.com/D16352
Summary:
Ref T11404. Depends on D16350.
Currently, custom fields can issue "N+1" queries in some cases, so querying 100 revisions issues 100 extra queries.
This affects all `*.search` endpoints for objects with custom fields, and some older endpoints (notably `differential.query`).
This change bulk loads "normal" custom fields, which gets rid of some of these queries. Instead of loading fields for each object, we build a big list of all fields and load them all at once.
The next change will tackle the remaining inefficient edge queries.
Test Plan:
- Configured a custom field with normal database storage in Differential.
- Ran `differential.query`, looking at custom fields in results for correctness.
- Ran `differential.revision.search`, looking at custom fields in results for correctness.
- In both cases, observed queries drop from `3N` to `2N` (all the "normal" custom field stuff got bulk loaded).
Reviewers: yelirekim, chad
Reviewed By: chad
Maniphest Tasks: T11404
Differential Revision: https://secure.phabricator.com/D16351
Summary:
Ref T11404. Currently, SearchEngineAttachments can bulk-load data but SearchEngineExtensions can not.
This leads to poor performance of custom fields. See T11404 for discussion.
This changes the API to support a bulk load + format pattern like the one Attachments use. The next change will use it to bulk-load custom field data.
Test Plan:
- Ran `differential.query`, `differential.revision.search` as a sanity check.
- No behavioral changes are expected
- See next revision.
Reviewers: yelirekim, chad
Reviewed By: chad
Maniphest Tasks: T11404
Differential Revision: https://secure.phabricator.com/D16350
Summary:
We're picking three useful groups of build statuses to provide as default queries:
- Stuff not yet building
- Stuff building
- Stuff which has finished building
These are reasonable buckets for builds since (unlike most objects in phabricatorland) users are generally waiting impatiently for the machine to do something for them, rather than being responsible for doing something with the machine.
Test Plan: clicked around the search engine and enjoyed my defaults
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D16349
Summary:
This supports a few basic use cases that aren't served by the buildable search engine:
- I'm trying to discover when the last time that this particular build plan failed was.
- I want to know if any builds have deadlocked.
- At a glance, I'm more interested in what build plans are running, not which buildables are being built. This is more often than not the case.
Test Plan: {F1744003}
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D16347
Summary:
Ref T4788. This gives us a new level of graceful degradation, so now we show:
- Zero through 100 connected tasks: whole graph.
- More than 100 connnected tasks, but fewer than 100 direct parents/subtasks: just parents and subtasks, with "..." to hint that the graph is cut off.
- More than 100 parents and children: just the "sorry, too much stuff" error message.
Test Plan: {F1740882}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4788
Differential Revision: https://secure.phabricator.com/D16344
Summary:
Ref T4788. Add links to jump to search results with a task's parents or subtasks. This allows relationships to remain useful if there are a zillion of them, and you can sort/filter stuff more easily.
Language might need some tweaking at some point, feeling a little un-brainy today with wordstuff.
Test Plan:
{F1740855}
{F1740856}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4788
Differential Revision: https://secure.phabricator.com/D16343
Summary:
Ref T8126. Ref T4788. This adds a way to query by parent or subtask.
I plan to link to this from the task graph (e.g., {nav View > Search Subtasks} or similar, in a dropdown on the "Task Graph" element) as a way to let us bail out if tasks have 300 subtasks and send the user to a big query result list. That'll give us more flexibility to tailor the UI for reasonable numbers of tasks.
There's no UI for this unless you specify a query yourself, so the only ways to get to it are:
- Manually put `?parentIDs=...` into the URI.
- Use the API.
- Future link from task graphs.
It doesn't seem too useful to me on its own, outside of the context of links from tasks.
Test Plan:
- Manually put `?parentIDs=...` and `?subtaskIDs=...` into Maniphest query UI, got expected results.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4788, T8126
Differential Revision: https://secure.phabricator.com/D16341
Summary:
Ref T8126. See that task for discussion. This change:
- Updates language to be more consistent ("Parents", "Subtasks") since I moved us away from the often-confusing "Block" language in T4788.
- Fixes bugs with finding the wrong set of tasks if tasks have a mixture of open and closed subtasks or parents.
Test Plan:
- Created four tasks: no subtasks, one closed subtask, one open subtask, mixture of open and closed subtasks.
- Created four more tasks: no parents, one closed parent, one open parent, mixture of open and closed parents.
- Searched for all this stuff, got the proper results:
{F1740683}
{F1740684}
{F1740685}
{F1740686}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8126
Differential Revision: https://secure.phabricator.com/D16340
Summary: Ref T11326. This adds prev/next links for recurring events (ala D16179) and moves the "accept/decline" buttons closer to the invite list. This might need some fiddling, but should be a little more human-friendly.
Test Plan: {F1740541}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11326
Differential Revision: https://secure.phabricator.com/D16339
Summary: Ref T8116. Puts a list of packages on the publisher page, and a list of versions on the package page.
Test Plan: Viewed a publisher, saw packages. Viewed a package, saw versions. Looked at list views.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8116
Differential Revision: https://secure.phabricator.com/D16321
Summary: Ref T8116. Add search-by-name and per-package / per-publisher search to Packages.
Test Plan: Searched publishers, packages, versions by name. Searched packages by publisher. Searched versions by package.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8116
Differential Revision: https://secure.phabricator.com/D16320
Summary:
Ref T8116. This adds a control for creating publishers (default: administrators) and default publisher/package edit controls.
I've left the edit defaults at "no one" for now to force you to select a policy. This might be something to look at later.
Test Plan: Created publishers, packages. Tried to create publishers with "can create" policy set restrictively.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8116
Differential Revision: https://secure.phabricator.com/D16319
Summary:
Ref T8116. A version has:
- a package (like "Arcanist") which it belongs to;
- a name (like "v3.1.5").
The name is immutable and unique, like the package key and publisher key.
Policy stuff:
- Versions have the exact same policies as their packages.
- You must be able to edit a package to create new versions of it.
This is still entirely uninteresting.
Test Plan: {F1731703}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8116
Differential Revision: https://secure.phabricator.com/D16316
Summary:
Ref T8116. A package has:
- a publisher (like "Phacility"), from the previous revision;
- a name (like "Arcanist");
- a package key (like "arcanist").
The package key is immutable, like the publisher key.
This gives a package a full key like "phacility/arcanist".
Policy stuff:
- You must be able to view a publisher to view a package (currently, everyone can always see all publishers).
- You must be able to edit a publisher to create a new package inside it.
- Packages have separate view/edit permissions.
This still does nothing interesting.
Test Plan: {F1731663}
Reviewers: chad
Reviewed By: chad
Subscribers: eadler
Maniphest Tasks: T8116
Differential Revision: https://secure.phabricator.com/D16315
Summary:
Ref T8116. Partially scavenged from D14152. This roughs in a new Packages application for Arcanist extensions and third-party applications, and adds a "Publisher" object.
A "Publisher" represents an individual or entity who is publishing a package, like "Phacility". It's explicitly //not// necessarily the original author -- just the primary entity vouching for the safety of the code.
A publisher just has a name and a unique key for now. For example, Phacility might have "Phacility" and "phacility", respectively.
Unique keys are immutable, e.g., the package "phacility/arcanist" will always be exactly the same package by exactly the same publisher.
Test Plan: {F1731621}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8116
Differential Revision: https://secure.phabricator.com/D16314
Summary:
Ref T11326. This isn't perfect, but should be a little easier to use and less weird/confusing.
Generally, provide a "Query > Month > Day" crumb on day views, and a "Wed, July 3" header.
Generally, provide a "Query > Month" crumb on month views, and a "July 2019" header.
Also try to fix a bit of padding/spacing on the day view.
Test Plan: {F1739128}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11326
Differential Revision: https://secure.phabricator.com/D16338
Summary:
Ref T11326. This doesn't go quite as far as the mock in T11326#185932, but gets rid of the easy margins.
Also cleans up some of the border rules so they're simpler and more consistent (no weird ragged edges on the far right).
Test Plan: {F1738951}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11326
Differential Revision: https://secure.phabricator.com/D16335
Summary:
Ref T11326. When an event is all-day, hide the time controls for the start/end dates. These aren't used and aren't helpful/useful.
This got a little more complicated than it used to be because EditEngine forms may have only some of these controls present.
Test Plan: Edited an all-day event; edited a normal event; swapped an event between normal and all-day.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11326
Differential Revision: https://secure.phabricator.com/D16327
Summary:
Fixes T11375. Some validation code was mishandling raw epoch timestamps.
For numeric values larger than 29999999 (e.g., 2999-12-25, christmas 2999), assume the value is a timestamp.
Test Plan: Used `maniphest.search` to query for `modifiedStart`, got a better result set and saw the `dateModified` constraint in the query.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11375
Differential Revision: https://secure.phabricator.com/D16326
Summary:
Finishes fixing T11365. rP28199bcb48 added the new numeric entry
control and used it for TOTP setup, but missed the case of entering
a factor when TOTP was already set up.
Test Plan:
Observe behaviour of TOTP setup and subsequent factor entry
in iOS browser, make sure they're consistent.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Maniphest Tasks: T11365
Differential Revision: https://secure.phabricator.com/D16325
Summary:
Fixes T11365. I tested these variants:
- `<input type="number" />`
- `<input type="text" pattern="\d*" />`
Of these, this one (using `pattern`) appears to have the best behavior: it shows the correct keyboard on iOS mobile and does nothing on desktops.
Using `type="number"` causes unwanted sub-controls to appear in desktop Safari, and a numbers + symbols keyboard to appear on iOS (presumably so users can type "." and "-" and maybe ",").
Test Plan: Tested variants in desktop browsers and iOS simulator, see here and T11365 for discussion.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11365
Differential Revision: https://secure.phabricator.com/D16323
Summary:
Fix T11339.
Now, old and new are both simple lists of phids, and the rendering should make sense.
Test Plan: Viewed existing transaction with all 3 states.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T11339
Differential Revision: https://secure.phabricator.com/D16311
Summary:
Fixes T11358. Entering a too-long title/subtitle currently raises an unfriendly (database-level) error.
Raise a friendlier error.
Test Plan: {F1731533}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11358
Differential Revision: https://secure.phabricator.com/D16313
Summary:
Fixes T10750. Files have some outdated cache/key code which prevents recording an edit history on file comments.
Remove this ancient cruft.
(Users must `bin/storage adjust` after upgrading to this patch to reap the benefits.)
Test Plan:
- Ran `bin/storage adjust`.
- Edited a comment in Files.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10750
Differential Revision: https://secure.phabricator.com/D16312
Summary: Ref T11326. This makes it a little easier to jump back up to check out your day.
Test Plan: {F1725575}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11326
Differential Revision: https://secure.phabricator.com/D16309
Summary: Ref T11326. This just cleans things up a little and removes some of the obvious layout/CSS issues.
Test Plan:
- Viewed day view before/after. Also viewed profile panel.
Before:
{F1725547}
After:
{F1725548}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11326
Differential Revision: https://secure.phabricator.com/D16308
Summary:
Ref T11326. This just inches things forward a little bit:
- Make it easier to see current day.
- Line-through cancelled events.
- Don't colorize the whole event title, just use an Attending/Invited/Custom icon.
- Slightly subtler treatment for all-day events.
Test Plan: See screenshot in T11326.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11326
Differential Revision: https://secure.phabricator.com/D16306
Summary:
Ref T11326. Normally, events occur at a specific epoch, independent of the viewer. For example, if we're having a meeting in 35 hours, every user who looks at the event will see that it starts 35 hours from now.
But when an event is "All Day", the start time and end time depend on the //viewer//. A day like "Christmas" does not start at the same time for everyone: it starts sooner if you're in a more-eastern timezone. Baiscally, an event on "July 15th" starts whenever "July 15th" starts for whoever is looking at it.
Previously, we stored these events by using the western-most and eastern-most timezones as the start and end times (the earliest possible start and latest possible end).
This worked OK, but we get into a bunch of trouble with EditEngine, mostly because each field can be updated individually now. We can't easily tell if an event is all-day or not when reading or updating the start time and end time, and making that easier would introduce a huge amount of complexity.
Instead, when we update the start or end time, we write //two// times:
- The epoch timestamp of the time the user entered, which is the start time we will use if the event is a normal event.
- The epoch timestamp of 12:00 AM in UTC on the same date as the //local// date the user entered. This is pretty much like just storing the date the user actually typed. This is what w'ell use if the event is an all-day event.
Then, no matter whether the event is later made all-day or not, we have all the information we need to display it correctly.
Test Plan:
- Created and edited all-day events.
- Migrated existing all-day events, which appeared to survive without problems. (Note that events all-day which were created or edited in the last couple of days `master` won't survive this mutation correctly and will need to be fixed.)
- Created and edited normal, recurring, and recurring all-day events.
- Swapped back to `stable`, created an event, specifically migrated it forward, made sure it survived with times intact.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11326
Differential Revision: https://secure.phabricator.com/D16305
Summary: Ref T11326. Align this stuff with "Host" and "hostPHID".
Test Plan: Searched for events by host.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11326
Differential Revision: https://secure.phabricator.com/D16303
Summary:
Ref T11326. This gets rid of the old multi-paged form stuff used in the last version of Diffusion.
This incidentally removes a callsite for a date control to make it a little easier to simplify them.
Test Plan: Grepped for all removed classes, no more callsites.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11326
Differential Revision: https://secure.phabricator.com/D16302
Summary:
Ref T11326. These are last-generation and neither of these have callsites anymore.
(I nuked these since I'm trying to simplify date handling.)
Test Plan: Grepped for callsites.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11326
Differential Revision: https://secure.phabricator.com/D16301
Summary: Ref T11326. Use modern methods instead of building this stuff separately.
Test Plan: Used `E123`, `{E123}`, saw references render normally.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11326
Differential Revision: https://secure.phabricator.com/D16300
Summary:
Ref T11326. Try to make this a little more useful:
- Don't show entire attendee list (not useful?)
- Show host (useful?)
- Show your own status prominently (attending vs declined vs invited).
- Show cancelled events prominently.
Test Plan: {F1723550}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11326
Differential Revision: https://secure.phabricator.com/D16299
Summary:
Ref T11326. Show this information with a subheader instead of in properties.
Also, slightly simplify the list view.
Test Plan: {F1723539}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11326
Differential Revision: https://secure.phabricator.com/D16298
Summary:
Ref T11326. Currently, events show the icon as a property, like this:
> Icon: Default
This is boring and terrible. Show the icon in the header instead:
{F1723530}
Also minor cleanup on active/cancel states.
Test Plan: Viewed an event, saw icon.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11326
Differential Revision: https://secure.phabricator.com/D16297
Summary:
Ref T11326. Currently, we render "E (99)" for ghost instances, which is meaningless and inconsistent.
Render these more sensibly and consistently.
Test Plan: Viewed event list, saw reasonable monograms / object names.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11326
Differential Revision: https://secure.phabricator.com/D16296
Summary:
Ref T4788. One install has some particularly impressive task graphs which are thousands of nodes large.
The current graph is pretty broken in these cases. For now, just render a "too big to show" message. In the future, I'd plan to finesse this (e.g., show parents/children, show links to parents/children, etc).
Test Plan:
- Viewed a normal task.
- Set limit to 3, viewed a task with graph size 6, saw an error message.
- Viewed a revision stack graph (unaffected).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4788
Differential Revision: https://secure.phabricator.com/D16295
Summary:
Fixes T9224. This adds:
- A "Default Edit Policy" and "Default View Policy" to Calendar, similar to other applications.
- "Event Host" and "Event Invitees" objects policies.
These policies often end up being redundant (the host can always view/edit, the invitees can always view), but they can be more clear than setting "No One", and "Editable By: Event Invitees" is a legitimately useful policy.
Test Plan:
- Created and edited events.
- Fiddled with defaults.
- Tried to remove myself as the event host for an "Editable By: Host" event, got an error ("you wouldn't be able to edit").
- Tried to remove myself as host/invitee for an "Editable By: Invitees" event, got an error.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9224
Differential Revision: https://secure.phabricator.com/D16294
Summary: Modular transactions have slightly more modern ways to express values now.
Test Plan: Looked at transaction record of a paste.
Reviewers: chad, avivey
Reviewed By: avivey
Differential Revision: https://secure.phabricator.com/D16293
Summary:
Fixes T10909. I think this is a generally reasonable sort of capability to expose, although I've made it edit-only for now (when creating an event, you're always the host).
Also clean up some minor leftovers in the code, and a couple of little bugs with recurrence frequencies.
Test Plan: Created an event, edited the host of an event.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10909
Differential Revision: https://secure.phabricator.com/D16292
Summary: Ref T10909. Ref T9224. We label this field "Host" in the UI; make the storage format consistent.
Test Plan:
- Viewed month view, day view, detail view of an event.
- Created a new event, saw myself as the host.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9224, T10909
Differential Revision: https://secure.phabricator.com/D16291
Summary:
Fixes T8911. This corrects several issues which could crop up if a calendar event query matched more results than the query limit:
- The desired order was not applied by the SearchEngine -- it applies the first builtin order instead. Provide a proper builtin order.
- When we generate ghosts, we can't do limiting in the database because we may select and then immediately discard a large number of parent events which are outside of the query range.
- For now, just don't limit results to get the behavior correct.
- This may need to be refined eventually to improve performance.
- When trimming events, we could trim parents and fail to generate ghosts from them. Separate parent events out first.
- Try to simplify some logic.
Test Plan: An "Upcoming" dashboard panel with limit 10 and the main Calendar "Upcoming Events" UI now show the same results.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8911
Differential Revision: https://secure.phabricator.com/D16289
Summary: Ref T7944. The search method is a bit bare-bones for now, but these substantially work.
Test Plan: Edited events via API; queried events via API.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7944
Differential Revision: https://secure.phabricator.com/D16288
Summary:
Fixes T10633. When generating email about a transaction which adjusts a date, render the offset explicitly (like "UTC-7").
This makes it more clear in cases like this:
- mail is being sent to multiple users, and not necessarily using the viewer's settings;
- you get some mail while travelling and aren't sure which timezone setting it generated under.
Test Plan: Rendered in text mode, saw UTC offset.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10633
Differential Revision: https://secure.phabricator.com/D16287
Summary:
Ref T9275. Swaps Calendar over to modular transactions. Theoretically, this has almost no effect on anything.
Ref T10633. I didn't actually do anything here yet, but this gets us ready to put timestamps in email.
Test Plan: Created and edited a bunch of events, nothing seemed catastrophically broken.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9275, T10633
Differential Revision: https://secure.phabricator.com/D16286
Summary: Ref T9275. I waffled back and forth on these transactions a bit, but put these back here in better working order.
Test Plan: Tried to schedule an event on "taco".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9275
Differential Revision: https://secure.phabricator.com/D16285
Summary:
Ref T9275. We were rendering too many transactions and/or over-rendering invitees.
Clean this logic up a bit:
- List all before/after invitees.
- Simplify the lists before rendering.
Test Plan: Viewed an event, edited invitees, got sensible human-readable transactions.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9275
Differential Revision: https://secure.phabricator.com/D16284
Summary:
Ref T9275. This throws away the old EditController and switches fully to EditEngine.
There's still some sketchy behavior (particularly, no JS stuff yet) but I think all the basics work properly.
Test Plan: Created and edited events via EditEngine, everything seemed to work alright.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9275
Differential Revision: https://secure.phabricator.com/D16283
Summary: Ref T9275. This gets things roughly into shape for a cutover to EditEngine, mostly by fixing some problems with "recurrence end date" not being nullable while editing events.
Test Plan: Edited events with EditPro controller, nothing was obviously broken.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9275
Differential Revision: https://secure.phabricator.com/D16282
Summary:
Ref T9275. This still has a number of rough edges and other minor problems (no JS on the controls, some date handling control bugs) but I'll smooth those over in future changes.
It does make all the editable transaction types available from EditEngine, technically speaking.
Test Plan: Created and edited events with the "pro" controller, which mostly worked.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9275
Differential Revision: https://secure.phabricator.com/D16281
Summary:
Ref T9275. Now that TYPE_ACCEPT and TYPE_DECLINE have been separated out, we can simplify TYPE_INVITE.
This now just takes a list of invited PHIDs, uninvites ones that were removed and invites ones that were added. This is simpler, lets more logic live in the Editor, and makes EditEngine/API access easier.
Test Plan: Created events, added and removed invitees. Used comment stacked action and "pro" editor to adjust invitees.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9275
Differential Revision: https://secure.phabricator.com/D16280
Summary:
Ref T9275. Currently, the "Start Date", "End Date", and "Recurrence End Date" transcations take a complex value (AphrontFormDateControlValue) and reduce it to an epoch.
Do this a little earlier, since the API will be much more usable if it just passes in epoch timestamps.
Events also have some logic where they rewrite the from date and to date on the actual object for all day events, then undo the changes later. Specifically, if you have an all-day event on "July 24th", the exact start and end times vary based on who is looking at it. Instead of overwriting the persistent `dateFrom` and `dateTo` properties, add separate `viewer` properties to make it easier to keep this stuff straight.
Since this means all-day events get stored in UTC, we need to query/fetch (and then discard) slightly more events. This is perfectly and much simpler to do.
The one weird "UTC" hack in here will get nuked when this moves to EditEngine properly.
Test Plan: Edited times for normal events and all-day events.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9275
Differential Revision: https://secure.phabricator.com/D16274
Summary:
Ref T9275. Currently, there's a single "invite" transaction type for managing Calendar invites, and it takes a map of invitees to status.
This isn't great for EditEngine or API access, since it lets you set anyone else to any status and we can't reuse as much code as we can with a simpler API.
Make "Accept" and "Decline" separate actions which affect the actor's invite, so "invite" can be a simpler transaction which just invites or uninvites people.
Test Plan:
- Joined/accepted/declined an event invitation.
- Edited event invitees.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9275
Differential Revision: https://secure.phabricator.com/D16272
Summary:
Ref T9275. This moves description, icon, and cancel/uncancel to EditEngine.
It removes TYPE_SEQUENCE_INDEX and TYPE_INSTANCE_OF_EVENT. These are currently never generated and I do not expect to genereate them (instead, these changes happen automatically when you edit a stub).
Test Plan: Edited an event with normal and pro edit forms.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9275
Differential Revision: https://secure.phabricator.com/D16264
Summary:
Ref T9275. When you create a recurring event which recurs forever, we want to avoid writing an infinite number of rows to the database.
Currently, we write a row to the database right before you edit the event. Until then, we refer to it as `E123/999` or whatever ("instance 999 of event 123").
This creates a big mess with trying to make recurring events work with EditEngine, Subscriptions, Projects, Flags, Tokens, etc -- all of this stuff assumes that whatever you're working with has a PHID.
I poked at letting this stuff work without a PHID a little bit, but that looked like a gigantic mess.
Instead, generate an event "stub" a little sooner (when you look at the event detail page). This is basically just an ID/PHID to refer to the instance.
Then, when you edit the stub, "materialize" it into a real event.
This still has some issues, but I think it's more promising than the other approach was.
Also:
- Removes dead user profile calendar controller.
- Replaces comments with EditEngine comments.
Test Plan:
- Commented on a recurring event.
- Awarded tokens to a recurring event.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9275
Differential Revision: https://secure.phabricator.com/D16248
Summary:
Ref T9275. This builds a Calendar EditEngine which only edits "name".
I'll add more fields, Conduit, etc., and move to modular transactions in future changes.
Test Plan: Used `editpro/` URI manually to edit the name of an event.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9275
Differential Revision: https://secure.phabricator.com/D16235
Summary:
Fixes T11307. Fixes T8124. Currently, builtin files are tracked by using a special transform with an invalid source ID.
Just use a dedicated column instead. The transform thing is too clever/weird/hacky and exposes us to issues with the "file" and "transform" tables getting out of sync (possibly the issue in T11307?) and with race conditions.
Test Plan:
- Loaded profile "edit picture" page, saw builtins.
- Deleted all builtin files, put 3 second sleep in the storage engine write, loaded profile page in two windows.
- Before patch: one of them failed with a race.
- After patch: both of them loaded.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8124, T11307
Differential Revision: https://secure.phabricator.com/D16271
Summary:
Fixes T10907. As written, this workflow will incorrectly reuse a temporary file if one exists.
Instead, make a new permanent file.
(Storage is still shared, so this usually will not actually create a copy of the file's data.)
Test Plan:
- Set a project's icon by clicking first button in "Use Picture" row.
- Before patch: temporary image was reused.
- After patch: new permanent file is generated.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10907
Differential Revision: https://secure.phabricator.com/D16270
Summary:
Fixes T11309. When checking if a repository was fully imported, we incorrectly allow unreachable, un-imported commits to prevent the repository from moving to "Imported".
This can happen if you delete branches from a repository while it is importing.
Instead, ignore unreachable commits when checking for remaining imports, and when reporting status via `bin/repository importing`.
Test Plan:
- Stopped daemons.
- Created a new repository and activated it.
- Ran `bin/repository update Rxx`.
- Deleted a branch in the repository.
- Ran `bin/repository update Rxx`.
- Ran daemons to flush queue.
Now:
- Ran `bin/repository importing`. Old behavior: showed unreachable commits as importing. New behavior: does not show unreachable commits.
- Ran `bin/repository update`. Old behavior: failed to move repository to "imported" status. New behavior: correctly moves repository to "imported" status.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11309
Differential Revision: https://secure.phabricator.com/D16269
Summary:
Ref T11309. In that task, a user misunderstood two parts of this error:
- They took "exception" to mean "unexpected failure", when it was intended to mean "rare circumstance".
- They intereted the internal ID number of a commit to mean that Phabricator was malfunctioning.
Make the language of this condition more direct, explaining what the situation means in greater detail.
Additionally, we would previously re-throw this exception, which would make the daemon exit, wait a moment, and restart. This was normal and expected.
When //unexpected// failures occur, it's important do to this: it prevents a daemon failing in a loop from causing too many side effects (e.g., limit of 1 email per 5 seconds instead of thousands per second).
When expected, permanent failures occur, we do not need to do this: the task will not be retried. I just did it because it was slightly more consistent ("failures restart daemons") and we had few permanent failure types at the time.
We have more now, and restarting the daemons generates some additional logs which have the potential to confuse. Cycling the daemon also (intentionally) reduces the rate at which we process tasks, which can be bad for permanent failures like "deleted commit" because users can delete a huge number of commits and possibly clog up the queue with cycle-after-failure actions.
Test Plan:
Tried to process a deleted commit, saw a new message:
```
2016-07-11 9:30:22 AM [STDE] <VERB> PhabricatorTaskmasterDaemon Task 1428658 was cancelled: Commit "R55:6c46b7d0fb82a859ca3f87a95dc8dcceef8088c9" (with internal ID "282161") is no longer reachable from any branch, tag, or ref in this repository, so it will not be imported. This usually means that the branch the commit was on was deleted or overwritten.
```
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11309
Differential Revision: https://secure.phabricator.com/D16268
Summary:
Fixes T11304. Prior to this change, we did an unnecessary write on every "*.search" call (this write didn't always actually write a row, since we only save //unique// saved queries, but still doesn't do anything useful ever, currently).
Instead, change this to not-write by default. We could add an "oh, and also I want you to do a write" option later, which would let us implement something like `arc query-stuff` which says "To see more results, view this URI in your browser: ...".
(It's possible to run one of these methods with an existing SavedQuery by using the key, so we still sometimes have a queryKey to return.)
Test Plan: Ran `almanac.service.search`, used DarkConsole to verify that no serachengine writes occurred.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11304
Differential Revision: https://secure.phabricator.com/D16263
Summary:
Ref T10423. This flag can cause `git diff` to take an enormously long time (the problem case was a 5M line, 20K file commit).
Instead:
- Run without the flag first.
- If that shows that the diff is definitely small, try again with the flag.
- If that works, return the slower, better output.
- If the fast diff affects too many paths or generating the slow diff takes too long, return the faster, slightly worse output.
The quality of the output differs in how well Git is able to detect "M" and "C" (moves and copies of files).
For example, if you copy `src/` to `srcpro/`, the fast output may not show that you copied files. The slow output will.
I think this is rarely useful for large copies anyway: it's interesting if a 1-2 file diff is a copy, but usually obvious/uninteresting if a 500-file diff is a copy.
Test Plan:
- Ran `bin/repository reparse --change rXnnn` on Git changes.
- Saw fast and slow commands execute normally.
- Tried on a large diff, saw only the fast command execute.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10423
Differential Revision: https://secure.phabricator.com/D16266
Summary: Fixes T11305, Ref T7754. Makes this menu dropdown act like actions and collapse to a fa-bars menu.
Test Plan:
View on mobile, desktop, browser. Click an action, spawn new page.
{F1717953}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T7754, T11305
Differential Revision: https://secure.phabricator.com/D16265
Summary I broke this in D16237: that made the CLI workflow work, but we attach the repository earlier in the web workflow and won't have one when we arrive here.
Test Plan: Created a new repository URI from the web UI.
Auditors: chad
Summary: fix T11290.
Test Plan: Paste language type, view in web and in emails (It uses quotes in HTML emails, which I think is something else).
Reviewers: epriestley, chad, #blessed_reviewers
Reviewed By: chad, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T11290
Differential Revision: https://secure.phabricator.com/D16252
Summary:
Fixes T11097. Currently, popup notifications show a useless timestamp with the current time, after D16041 made some things more consistent.
Strip these from the popup bubbles.
Test Plan:
- Saw a popup bubble, no timestamp.
- Viewed main notification list, saw timestamps.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11097
Differential Revision: https://secure.phabricator.com/D16258
Summary: Fixes T11278. Also mention `svnsync`, since we have some evidence that it works.
Test Plan: {F1716250}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11278
Differential Revision: https://secure.phabricator.com/D16255
Summary: Fixes T11146. Allow no slug in the URI.
Test Plan: Previewed root document in Phriction.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11146
Differential Revision: https://secure.phabricator.com/D16257
Summary:
Fixes T11295. Prior to this change, the "404 page" for daemon tasks fatals.
This page is special cased a little bit and not a normal 404 page, because it's possible for you to click a valid link and the task to get GC'd by the time you load the page, or similar. It tries to be a little more user-friendly than a bare 404.
Test Plan:
- Visited `/daemon/task/1428348920328/` (any invalid ID).
- Now got a nice "no such task" page.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11295
Differential Revision: https://secure.phabricator.com/D16254
Summary:
This is the quickest and dirtiest fix I could come up with.
`PhabricatorApplicationTransaction::getTitleForMail()` is using `clone $this`, which doesn't actually effect `implementation`.
Ref T9789.
Test Plan: update paste comment, get plaintext mail.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Maniphest Tasks: T9789
Differential Revision: https://secure.phabricator.com/D16251
Summary:
Fixes T11285. We can end up loading panel handles while processing edits (e.g., disabling menu items on a project). We probably started loading these after the modular transaction changes in T9789, which load the handle for the transaction object unconditionally.
The handles aren't too useful, but they currently fail to load/build because panels don't have a URI. We could give them some sort of method here, but just nuke it for now since they don't appear anywhere and this unclogs the daemon queue.
Test Plan:
- Disabled a menu item on a project.
- Ran publish task with `bin/worker execute --id <id>`.
- Before patch: fatal on getURI() with stack trace similar to T11285.
- After patch: clean execution.
Reviewers: chad, avivey
Reviewed By: avivey
Maniphest Tasks: T11285
Differential Revision: https://secure.phabricator.com/D16249
Summary: See Z2352#28072. Expose this flag to allow callers to take actions after an import finishes, which is generally reasonable.
Test Plan: Ran query from console, saw `isImporting` flag in results.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D16247
Summary:
Ref T9360. Old docs felt a little weird to me (particularly very-old text like "favoring the individual rather than the collective").
Try a simpler tone focused more on use cases and examples?
Test Plan:
Read documentation.
Also, viewed a post list and saw monograms.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9895, T9360
Differential Revision: https://secure.phabricator.com/D16246
Summary: Show the J monogram when internally linked, but nothing externally (cleaner UI). Ref T9360
Test Plan: View post live and internal.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9360
Differential Revision: https://secure.phabricator.com/D16245
Summary: Ref T9360, forces https if we say the blog is https.
Test Plan: Fake an https, get redirected.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9360
Differential Revision: https://secure.phabricator.com/D16241
Summary: Ref T9360. These weren't getting set properly, also make them nullable since they're optional.
Test Plan: run upgrade, make a new blog with and without a parent domain. Edit a current blog.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9360
Differential Revision: https://secure.phabricator.com/D16242
Summary:
Ref T9360. Moves PhamePost to CommentEditEngine.
[x] HTTP Parameters dropdown on New Post goes to 404
[x] Implement EditEngine Comments
Test Plan: Make Post, Make Comment, Laugh.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9360
Differential Revision: https://secure.phabricator.com/D16222
Summary: Fixes T11280. I extracted this at the last minute and got the constant flipped.
Test Plan: Archived, then activated a paste. Observed correct timeline stories/icons/etc.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11280
Differential Revision: https://secure.phabricator.com/D16240
Test Plan: Tested with a transactionType from an extension.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Maniphest Tasks: T9789
Differential Revision: https://secure.phabricator.com/D16236
Summary: Fixes T11275. This search query doesn't actually have any options so these links are a little pointless, but generate valid links instead of 404s.
Test Plan: Clicked "Advanced Search" and "Edit Queries" from `/settings/`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11275
Differential Revision: https://secure.phabricator.com/D16238
Summary: Fixes T11276. This feels slightly iffy (we `attachRepository()` here, and also when applying the TYPE_REPOSITORY transaction) but simpler than trying to reorder things.
Test Plan: Created a repository URI with transactions in `["uri", "repository"]` order.
Reviewers: chad, avivey
Reviewed By: avivey
Maniphest Tasks: T11276
Differential Revision: https://secure.phabricator.com/D16237
Summary:
Fixes T11269. The basic issue is that `git log` in an empty repository exits with an error message.
Prior to recent Git (2.6?), this message reads:
> fatal: bad default revision 'HEAD'
This message was somewhat recently changed by <ce11360467>. After that, it reads:
> fatal: your current branch 'master' does not have any commits yet
This change isn't //technically// a //complete// fix because you could still hit this issue like this:
- Create an empty repository.
- Push some stuff to `master`.
- Delete `master`.
However, this is very rare and even in this case the repository will fix itself once you push something again. We can try to fix that if any users ever actually hit it.
Test Plan:
- Created a new empty Git repository.
- Ran `bin/repository update Rxx`.
- Before patch: "git log" error because of the empty repository.
- After patch: clean update.
- Also ran `repository update` on a non-empty repository.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11269
Differential Revision: https://secure.phabricator.com/D16234
Summary: Ref T9640. Fixes T9888. Decline to support PHP 7 until the async signal handling issue in T11270 is resolved.
Test Plan: Faked local version, got helpful error message.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9640, T9888
Differential Revision: https://secure.phabricator.com/D16231
Summary: Fixes T11243. Seems reasonable to open this stuff in a new window so you don't put any application state in Herald, etc., at risk -- looking in this menu for help with a currently-executing workflow is reasonable and normal.
Test Plan: Clicked a help menu link, saw it open in a new page.
Reviewers: avivey, chad
Reviewed By: chad
Maniphest Tasks: T11243
Differential Revision: https://secure.phabricator.com/D16230
Summary: Fixes T11267. This data was coming back weird (in reverse order relative to the graph itself). Previously it worked OK anyway, but the new logic is a little more sensitive to the input.
Test Plan: Viewed a Mercurial repository with linear history, saw linear history.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11267
Differential Revision: https://secure.phabricator.com/D16229
Summary: Ref T11244. 8 more tokens. Probably need better math on the selector?
Test Plan: Award Dat Boi.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: putnam, Korvin
Maniphest Tasks: T11244
Differential Revision: https://secure.phabricator.com/D16228
Summary:
Ref T10855. This can't replace the old edit flow yet, but get the basics in place.
(This is actually much closer to just being able to swap than I anticipated since CustomFields sort of just work, but the exiting flow has some "clone existing panel" / "place directly on dashboard" stuff that this doesn't yet.)
Test Plan: Created and edited a panel by manually using the "editpro" flow.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10855
Differential Revision: https://secure.phabricator.com/D16226
Summary:
Ref T4788. As it turns out, our tasks are very tightly connected.
Instead of loading every parent/child task, then every parent/child of those tasks, etc., etc., only load tasks in the "same direction" that we're already heading.
For example, we load children of children, but not parents of children. And we load parents of parents, but not children of parents.
Basically we only go "up" and "down" now, but not "out" as much. This should reduce the gigantic multiple-thousand-node graphs currently shown in the UI.
I still discover the whole graph for revisiosn, because I think it's probably more useful and always much smaller. That might need adjustment too, though.
Test Plan: Seems fine locally??
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4788
Differential Revision: https://secure.phabricator.com/D16218
Summary: Ref T9360. This makes these transactional.
Test Plan: Set new header, delete header. Set new profile image, reset profile image.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9360
Differential Revision: https://secure.phabricator.com/D16217
Summary: Ref T4788. This seems reasonable locally, but not sure how it will feel on real data. Might need some tweaks, or might just be a terrible idea.
Test Plan: {F1708059}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4788
Differential Revision: https://secure.phabricator.com/D16214
Summary:
Ref T4788. This separates the revision graph view into a base class with core logic and a revision class with Differential-specific logic, so I can subclass it in Maniphest, etc., and try using it in other applications to show similar graphs.
Not sure if we'll stick with it, but even if we don't this makes the code a bit cleaner and gets custom rendering logic out of the RevisionViewController, which is nice.
Test Plan: Viewed revisions, saw the stack UI completely unchanged.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4788
Differential Revision: https://secure.phabricator.com/D16213
Summary: New tokens, slightly larger (18x18 vs 16x16). I think these all feel decent, I might tweak the thumbs icons a little more color-wise.
Test Plan:
Use Tokens.
{F1707411}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11244
Differential Revision: https://secure.phabricator.com/D16211
Summary: Ref T10628. Turn these into tabs in a single box, since "local commits" and "similar revisions" are of particularly rare use.
Test Plan: {F1707196}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10628
Differential Revision: https://secure.phabricator.com/D16209
Summary: Ref T10628. This moves everything else over. I'll clean up the cruft in the next diff.
Test Plan:
- Viewed Conduit API page, toggled tabs.
- Viewed Harbormaster build, toggled tabs.
- Viewed a Drydock lease, swapped tabs.
- Viewed a Drydock resource, swapped tabs.
- Viewed mail, swapped tabs.
- Grepped for `addPropertyList(...)`, looked for any remaining calls with a second argument.
- Also checked rSAAS for any calls, but we don't have anything there that uses tabs.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10628
Differential Revision: https://secure.phabricator.com/D16207
Summary:
Ref T10628. Switch this to be nicer and more modern.
- When there's only one tab, add an option to hide it.
Test Plan:
- Viewed normal revisions (no tabs).
- Viewed X vs Y revisions (two tabs, rightmost tab selected by default).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10628
Differential Revision: https://secure.phabricator.com/D16206
Summary:
Ref T10628. Currently, tabs are part of ObjectBoxes. However, the code is a bit of a mess and I want to use them in some other contexts, notably the "prose diff" dialog to show "old raw, new raw, diff".
Pull them out, and update Files to use the new stuff. My plan is:
- Update all callsites to this stuff.
- Remove the builtin-in ObjectBox integration to simplify ObjectBox a bit.
- Move forward with T10628.
This is pretty straightforward. A couple of the sigils are a little weird, but I'll update the JS later. For now, the same JS can drive both old and new tabs.
Test Plan: Viewed files, everything was unchanged.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10628
Differential Revision: https://secure.phabricator.com/D16205
Summary:
Fixes T11242. See that task for detailed discussion.
Previously, it didn't particularly matter that we don't MIME detect chunked files since they were all just big blobs of junk (PSDs, zips/tarballs, whatever) that we handled uniformly.
However, videos are large and the MIME type also matters.
- Detect the overall mime type by detecitng the MIME type of the first chunk. This appears to work properly, at least for video.
- Skip mime type detection on other chunks, which we were performing and ignoring. This makes uploading chunked files a little faster since we don't need to write stuff to disk.
Test Plan:
Uploaded a 50MB video locally, saw it as chunks with a "video/mp4" mime type, played it in the browser in Phabricator as an embedded HTML 5 video.
{F1706837}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11242
Differential Revision: https://secure.phabricator.com/D16204
Summary:
Ref T4788. When closing a task as a duplicate of another task, you can only select one task, since it doesn't really make sense to merge one task into several other tasks (this operation is //possible//, but probably not what anyone ever wants to do, I think?).
Make the UI understand this: after you select a task, disable all of the "select" buttons in the UI to make this clear.
Test Plan:
- Used "Close as Duplicate", only allowed to select 1 task.
- Used other editors like "Merge Duplicates In", allowed to select lots of tasks.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4788
Differential Revision: https://secure.phabricator.com/D16203
Summary: Ref T9360. This adds ability to search posts by blog(s) and by type better.
Test Plan:
Create some posts, search for them.
{F1705961}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9360
Differential Revision: https://secure.phabricator.com/D16199
Summary:
Ref T4788. Fixes T10703.
In the longer term I want to put this on top of ApplicationSearch, but that's somewhat complex and we're at a fairly good point to pause this feature for feedback.
Inch toward that instead: provide more appropriate filters and defaults without rebuilding the underlying engine. Specifically:
- No "assigned" for commits (barely makes sense).
- No "assigned" for mocks (does not make sense).
- Default to "open" for parent tasks, subtasks, close as duplicate, and merge into.
Also, add a key to the `search_document` table to improve the performance of the "all open stuff of type X" query. "All Open Tasks" is about 100x faster on my machine with this key.
Test Plan:
- Clicked all object relationships, saw more sensible filters and defaults.
- Saw "open" query about 100x faster locally (300ms to 3ms).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4788, T10703
Differential Revision: https://secure.phabricator.com/D16202
Summary: Fixes T11240. Also simplify things a little and share a bit more code.
Test Plan:
- Viewed revisions and tasks, opened submenu.
- Viewed as a user without edit permission, saw the menus greyed out.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11240
Differential Revision: https://secure.phabricator.com/D16201
Summary:
Ref T4788. Fixes T7820. This updates the "Merge Duplicates In" interaction, and adds a "Close as Duplicate" action.
These are the last interactions that were using the old code, so it removes that code.
Merges are now recorded as real edges, so we can show them in the UI later on (originally from T9390, etc).
Also provides more general support for relationships which need EDIT permission, not-undoable relationships like merges, preventing relating an object to itself, and relationship side effects like merges.
Finally, fixes a couple of behaviors around typing an exact object name (like `T123`) to find the related object.
Test Plan:
- Merged tasks into the current task.
- Closed the current task as a duplicate of another task.
- Edited other relationships.
- Searched for tasks, commits, etc., by object monogram.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4788, T7820
Differential Revision: https://secure.phabricator.com/D16196
Summary:
The first dialog was being given the wrong user (`$user`, should be `$viewer`), leading to a CSRF issue.
(The CSRF token it generated was invalid in all validation contexts, so this wasn't a security problem or a way to capture CSRF tokens for other users.)
Use `newDialog()` instead.
(This seems completely unrelated to the vaguely-similar-looking issues we saw earlier this week.)
Test Plan:
- Added a new email address.
- Clicked "Done" on the last step.
- Completed workflow instead of getting a CSRF error.
Reviewers: chad, tide
Reviewed By: tide
Differential Revision: https://secure.phabricator.com/D16200
Summary:
Ref T9360.
[x] View Live useless on archived blogs
[x] Edit Blog Image treatment like profiles
[x] Pager next/prev should keep you on whatever view you're on
[x] Unset user titles aren't falling back properly
[x] Add captions to edit fields for better clarification
Test Plan: Archive a blog, Edit a photo, verify pager on live and internal blogs, check empty titles, and view new edit form instructions.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9360
Differential Revision: https://secure.phabricator.com/D16197
Summary: Ref T4788. This moves everything except "merge" to the new code.
Test Plan:
- Edited relationships in Differential, Diffusion, and Pholio.
- Uninstalled Pholio, made sure "Edit Mocks..." actions vanished.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4788
Differential Revision: https://secure.phabricator.com/D16193
Summary:
Ref T4788. Fixes T9232. This moves the "search for stuff to attach to this object" flow away from hard-coding and legacy constants and toward something more modular and flexible.
It also adds an "Edit Commits..." action to Maniphest, resolving T9232. The behavior of the search for commits isn't great right now, but it will improve once these use real ApplicationSearch.
Test Plan: Edited a tasks' related commits, mocks, tasks, etc.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4788, T9232
Differential Revision: https://secure.phabricator.com/D16189
Summary: Fixes T11223. I missed a few of these; most of them kept working anyway because we have redirects in place, but make them a bit more modern/not-hard-coded.
Test Plan:
- Generated and revoked API tokens for myself.
- Generated and revoked API tokens for bots.
- Revoked temporary tokens for myself.
- Clicked the link to the API tokens panel from the Conduit console.
- Clicked all the cancel buttons in all the dialogs, too.
In all cases, everything now points at the correct URIs. Previously, some things pointed at the wrong URIs (mostly dealing with stuff for bots).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11223
Differential Revision: https://secure.phabricator.com/D16185
Summary:
Ref T9838.
Add a Properties field to Revision, and update a `wasAcceptedBeforeClose` when closing a revision.
Test Plan:
A quick run through the obvious steps (Close with commit/manually, with or w/o accept) and calling `differential.query` shows the `wasAcceptedBeforeClose` property was setup correctly.
Pushing closed + accepted passes the relevant herald, which was my immediate issue; Pushing un-accepted is blocked.
Test the "commit" rule (Different from "pre-commit") by hacking the DB and running the "has accepted revision" rule in a test-console.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Maniphest Tasks: T9838
Differential Revision: https://secure.phabricator.com/D15085
Summary: Ref T9897. This moves "Domain" to "DomainFullURI" to allow setting of https or for some reason, a port. I guess.
Test Plan: Try to break by setting a path, or fake protocol. Set to http, or https, see correct redirects. Verify domain still gets written.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9897
Differential Revision: https://secure.phabricator.com/D16173
Summary:
Ref T11208. See that task for a more detailed description of revprops.
This allows revprop changes in a hosted Subversion repository if the repository has the "allow dangerous changes" flag set.
In the future, we could expand this into real Herald support, but the only use case we have for now is letting `svnsync` work.
Test Plan:
Edited revprops with `svn propset --revprop -r 2 propkey propvalue repositoryuri`:
- Tried before patch, got a "configure a commit hook" error.
- Tried after patch, got a "dangerous change" error.
- Allowed dangerous changes.
- Did a revprop edit.
- Prevented dangerous changes.
- Got an error again.
- Made a normal commit to an SVN repository.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11208
Differential Revision: https://secure.phabricator.com/D16174
Summary: Fixes T11164. At least, this fixes it locally for me. I don't know how to code. Copy Pasta!
Test Plan: Change name, don't see extra timeline entry on quality set anymore.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11164
Differential Revision: https://secure.phabricator.com/D16169
Summary: Fixes T11166. Adds some class, and space to the preview widget.
Test Plan: Test Maniphest, Ponder, etc, without a footer.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11166
Differential Revision: https://secure.phabricator.com/D16168
Summary: Fixes T11198. These are confusing or premature if you aren't an activated user: disabled or unapproved accounts won't be able to act on them.
Test Plan: Changed timezone, went through flow to correct it
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11198
Differential Revision: https://secure.phabricator.com/D16167
Summary:
Ref T11179. This splits "Edit Blocking Tasks" into two options now that we have more room ("Edit Parent Tasks", "Edit Subtasks").
This also renames "Blocking" tasks to "Subtasks", and "Blocked" tasks to "Parent" tasks. My goals here are:
- Make the relationship direction more clear: it's more clear which way is up with "parent" and "subtask" at a glance than with "blocking" and "blocked" or "dependent" and "dependency".
- Align language with "Create Subtask".
- To some small degree, use more flexible/general-purpose language, although I haven't seen any real confusion here.
Fixes T6815. I think I narrowed this down to two issues:
- Just throwing a bare exeception (we now return a dialog explicitly).
- Not killing open transactions when the cyclec check fails (we now kill them).
Test Plan:
- Edited parent tasks.
- Edited subtasks.
- Tried to introduce graph cycles, got a nice error dialog.
{F1697087}
{F1697088}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6815, T11179
Differential Revision: https://secure.phabricator.com/D16166
Summary:
Ref T11179. Ref T4768. Currently, on `master`, if two users open "Edit Revisions" at the same time, then add revisions A and B, only the last state wins (just "B").
Instead, apply these as "add A" and "add B" so they merge in a natural way.
Test Plan:
- Opened edit dialog in two windows.
- Added "A" in one, "B" in the other.
- Saved both.
- Saw "Added A" and "Added B" transactions, instead of "Added A" and "Removed A, added B".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4768, T11179
Differential Revision: https://secure.phabricator.com/D16164
Summary: Ref T11179. This is basically a "pro" controller to replace the SearchAttach controller. It does basically the same stuff, just in a (mostly) more modern and modular way.
Test Plan:
- Added and removed mocks.
- Added and removed revisions.
- Everything worked just like it did before.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11179
Differential Revision: https://secure.phabricator.com/D16163
Summary:
Ref T11179. This generates the Maniphest menu items in a modular way. It doesn't change any of the underlying code yet.
Searching for commits doesn't work particularly well so I've just hidden that for now, but the item itself works fine.
Test Plan: {F1696849}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11179
Differential Revision: https://secure.phabricator.com/D16162
Summary: Fixes T11193. Assume this is the correct place to check for permissions before attaching edges.
Test Plan: Create a task and set edit policy to Admins, log into test account. Try to Edit Subtasks, Merge Duplicates, Attach a Diff, or Attach a Mock, get a Policy Dialog explaing why.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11193
Differential Revision: https://secure.phabricator.com/D16161
Summary: Fixes T11190. The div with all the stuff in it was sometimes ending up on top of the "select" button, making it unclickable.
Test Plan: Clicked "select" in several browsers.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11190
Differential Revision: https://secure.phabricator.com/D16160
Summary: This makes it more natural to write Herald rules about commits that appear on any or no branches.
Test Plan: Wrote a commit rule for commits on any branch, ran it with `bin/repository reparse --herald <commit>`, saw expected results in web UI.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D16158
Summary:
Ref T11179. Alternative to D16152. I think this turned out a bit better than the other one did.
Currently, we render two copies of the menu (one for mobile, one for desktop). A big chunk of this is sharing the nodes instead: when you open the mobile dropdown menu, it steals the nodes from the document. When you close it, it puts them back. Magic! Sneaky!
Test Plan:
{F1695499}
{F1695500}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11179
Differential Revision: https://secure.phabricator.com/D16157
Summary: Ref T11034. Ref T4788. This allows you to resize the typeahead browse dialog if you want. I plan to let you resize the object selector dialog in the future.
Test Plan: {F1695433}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4788, T11034
Differential Revision: https://secure.phabricator.com/D16156
Summary:
Ref T11034. This seems a little more promising. Two problems at the moment:
- This doesn't actually provide any useful information at all right now.
- Many object types have no profile images.
Test Plan:
{F1695254}
{F1695255}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11034
Differential Revision: https://secure.phabricator.com/D16155
Summary:
Ref T11179. One issue I'm getting with trying to turn actions into dropdowns is that we currently render this menu very late, which can cause us to try to add more metadata after we start resolving metadata. This won't work right now (and making it work seems unreasonably complicated), so stop doing it and fatal if something tries.
(This might make some things fatal but //should// be safe -- anything that fatals should have been broken already.)
Test Plan:
Browsed around looking for fatals, didn't see any.
(This primarily avoids a broken state / fatal in a future diff.)
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11179
Differential Revision: https://secure.phabricator.com/D16151
Summary: Ref T9897. Adds a Parent Site and Parent Domain field to allow external sites to link back to parent.
Test Plan: Set up ```local.blog.phacility.com```, set parent site to "Phacility" and parent domain to "local.www.phacility.com". Get new crumbs at Blog and Post levels.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9897
Differential Revision: https://secure.phabricator.com/D16150
Summary:
Fixes T11180. In Git, it's possible to tag a tag (????). When you do, we try to log the tag-object, which automatically resolves to the commit and fails.
Just skip these. If "A" points at "B" which points at "C", it's fine to ignore "A" and "B" since we'll get the same stuff when we process "C".
Test Plan:
- Tagged a tag.
- Pushed it.
- Discovered it.
- Before patch: got exception similar to the one in T11180.
- After patch: got tag-tag skipped. Also got slightly better error messages.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11180
Differential Revision: https://secure.phabricator.com/D16149
Summary: Reading the code, this seems correct, but I don't have a local test. Ref T9897
Test Plan: read carefully
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9897
Differential Revision: https://secure.phabricator.com/D16148
Summary: Makes the crumbs background and border disappear in the live view of Phame.
Test Plan: Go live, see no crumb bg. Test blog, post, mobile, desktop.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16146
Summary: Adds a new header layout for Phame Blog. Subtitles now also.
Test Plan:
With Image, With Subtitle, Without Image, Without Subtitle. Mobile, Tablet, Desktop.
{F1691506}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16147
Summary:
Ref T11153. If you have a build plan like this:
- Lease machine A.
- Lease machine B.
- Run client-tests on machine A.
- Run server-tests on machine B.
...and we get machine A quickly, then finish the tests, we currently do not release machine A until the whole plan finishes.
In the best case, this wastes resources (something else could be using that machine for a while).
In a worse case, this wastes a lot of resources (if machine B is slow to acquire, or the server tests are much slower than the client tests, machine A will get tied up for a really long time).
In the absolute worst case, this might deadlock things.
Instead, release artifacts as soon as no waiting/running steps take them as inputs. In this case, we'd release machine A as soon as we finished running the client tests.
In the case where machines A and B are resources of the same type, this should prevent deadlocks. In all cases, this should improve build throughput at least somewhat.
Test Plan:
I wrote this build plan which runs a "fast" step (10 seconds) and a "slow" step (120 seconds):
{F1691190}
Before the patch, running this build plan held the lease on the "fast" machine for the full 120 seconds, then released both leases at the same time at the very end.
After this patch, I ran this plan and observed the "fast" lease get released after 10 seconds, while the "slow" lease was held for the full 120.
(Also added some `var_dump()` into things to sanity check the logic; it appeared correct.)
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11153
Differential Revision: https://secure.phabricator.com/D16145
Summary: Adds a view live and view internal link to the blog and crumbs manage page.
Test Plan: Click on new links.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16142
Summary: Fixes T10901. Allows blogs to have headers. I've built this in a basic way, any file, max-height is 240. Should bleed into top crumbs, so any spacing you want you should add to the file itself. Might have to see how users break this.
Test Plan: Set a blog header, see blog header, remove blog header, see no blog header. Check mobile, tablet, desktop break points.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10901
Differential Revision: https://secure.phabricator.com/D16141
Summary: This is the backend half of uploading an image as a header for Phame Blogs. Allows you to upload image, or delete it. Ref T10901
Test Plan:
Go to Manage Blog, visit Edit Header Image, Upload snarky file. See snarky file on Manage page. Edit Header Image, click delete, save, see file goes away.
{F1690966}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10901
Differential Revision: https://secure.phabricator.com/D16140
Summary:
This test has been failing occasionally in a way that does not reproduce, and only when no one is looking at it.
Try to add some extra assertions to maybe get more information.
Test Plan: `arc unit`
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D16137
Summary: Ref T9028. When selecting refs, pretend refs in "refs/remotes/" that we don't otherwise recognize don't exist, since it looks like these are probably remotes //of the remote// we're observing, and who knows what state they're in.
Test Plan: Used `bin/repository discover --verbose` to verify that these named refs no longer appear in the list.
Reviewers: chad, joshuaspence
Reviewed By: joshuaspence
Maniphest Tasks: T9028
Differential Revision: https://secure.phabricator.com/D16136
Summary:
Ref T9028. Mostly, this gives them a strikethru style.
(I think this is probably the right definition of "closed" for commits. Another definition might be "audited", but I don't think completing audits really "closes" a commit.)
Test Plan: {F1689662}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9028
Differential Revision: https://secure.phabricator.com/D16135
Summary: Ref T9028. Ref T6878. This rule should probably be refined in the long term, but for now just ignore "phabricator/diff/12424" and similar staging area tags.
Test Plan: Ran `bin/repository discover --verbose` on a repository with staging area refs, saw Phabricator ignore those refs as untracked.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6878, T9028
Differential Revision: https://secure.phabricator.com/D16134
Summary:
Ref T9028. This allows us to detect when commits are unreachable:
- When a ref (tag, branch, etc) is moved or deleted, store the old thing it pointed at in a list.
- After discovery, go through the list and check if all the stuff on it is still reachable.
- If something isn't, try to follow its ancestors back until we find something that is reachable.
- Then, mark everything we found as unreachable.
- Finally, rebuild the repository summary table to correct the commit count.
Test Plan:
- Deleted a ref, ran `pull` + `refs`, saw oldref in database.
- Ran `discover`, saw it process the oldref, mark the unreachable commit, and update the summary table.
- Visited commit page, saw it properly marked.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9028
Differential Revision: https://secure.phabricator.com/D16133
Summary:
Ref T9028. This corrects the reachability of existing commits in a repository.
In particular, it can be used to mark deleted commits as unreachable.
Test Plan:
- Ran it on a bad repository, with bad args, etc.
- Ran it on a clean repo, got no changes.
- Marked a reachable commit as unreachable, ran script, got it marked reachable.
- Started deleting tags and branches from the local working copy while running the script, saw greater parts of the repository get marked unreachable.
- Pulled repository again, everything automatically revived.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9028
Differential Revision: https://secure.phabricator.com/D16132
Summary:
Ref T9028. This improves the daemon behavior for unreachable commits. There is still no way for commits to become marked unreachable on their own.
- When a daemon encounters an unreachable commit, fail permanently.
- When we revive a commit, queue new daemons to process it (since some of the daemons might have failed permanently the first time around).
- Before doing a step on a commit, check if the step has already been done and skip it if it has. This can't happen normally, but will soon be possible if a commit is repeatedly deleted and revived very quickly.
- Steps queued with `bin/repository reparse ...` still execute normally.
Test Plan:
- Used `bin/repository reparse` to run every step, verified they all mark the commit with the proper flag.
- Faked the `reparse` exception in the "skip step" code, used `repository reparse` to skip every step.
- Marked a commit as unreachable, ran `discover`, saw daemons queue for it.
- Ran daemons with `bin/worker execute --id ...`, saw them all skip + queue the next step.
- Marked a commit as unreachable, ran `bin/repository reparse` on it, got permanent failures immediately for each step.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9028
Differential Revision: https://secure.phabricator.com/D16131
Summary:
Ref T9028. This is the easy part of dealing with deleted commits:
- Add a flag for unreachable commits (nothing sets this flag yet).
- Ignore unreachable commits when querying for known commits during discovery, so we pretend they do not exist.
- When recording a commit, try just reviving an existing unreachable commit first. If that works, bail out.
Test Plan:
- Artificially marked a commit as unreachable with raw SQL.
- Verified it said "deleted: unreachable" in the UI.
- Ran `repository discover --trace --verbose`.
- Saw the discovery process ignore the commit when filling the cache.
- Saw the discovery process revive the commit instead of trying to record it again.
- Web UI now shows the commit as normal.
- Running `repository discover` again doesn't make any further changes.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9028
Differential Revision: https://secure.phabricator.com/D16130
Summary:
Ref T9028. Fixes T6878. Currently, we only fetch and discover branches. This is fine 99% of the time but sometimes commits are pushed to just a tag, e.g.:
```
git checkout <some hash>
nano file.c
git commit -am '...'
git tag wild-wild-west
git push origin wild-wild-west
```
Through a similar process, commits can also be pushed to some arbitrary named ref (we do this for staging areas).
With the current rules, we don't fetch tag refs and won't discover these commits.
Change the rules so:
- we fetch all refs; and
- we discover ancestors of all refs.
Autoclose rules for tags and arbitrary refs are just hard-coded for now. We might make these more flexible in the future, or we might do forks instead, or maybe we'll have to do both.
Test Plan:
Pushed a commit to a tag ONLY (`vegetable1`).
<cf508b8de6>
On `master`, prior to the change:
- Used `update` + `refs` + `discover`.
- Verified tag was not fetched with `git for-each-ref` in local working copy and the web UI.
- Verified commit was not discovered using the web UI.
With this patch applied:
- Used `update`, saw a `refs/*` fetch instead of a `refs/heads/*` fetch.
- Used `git for-each-ref` to verify that tag fetched.
- Used `repository refs`.
- Saw new tag appear in the tags list in the web UI.
- Saw new refcursor appear in refcursor table.
- Used `repository discover --verbose` and examine refs for sanity.
- Saw commit row appear in database.
- Saw commit skeleton appear in web UI.
- Ran `bin/phd debug task`.
- Saw commit fully parse.
{F1689319}
Reviewers: chad
Reviewed By: chad
Subscribers: avivey
Maniphest Tasks: T6878, T9028
Differential Revision: https://secure.phabricator.com/D16129
Summary:
Ref T11140. This makes encryption actually work:
- Provide a new configuation option, `keyring`, for specifying encryption keys.
- One key may be marked as `default`. This activates AES256 encryption for Files.
- Add `bin/files generate-key`. This is helps when generating valid encryption keys.
- Add `bin/files encode`. This changes the storage encoding of a file, and helps test encodings and migrate existing data.
- Add `bin/files cycle`. This re-encodes the block key with a new master key, if your master key leaks or you're just paraonid.
- Document all these options and behaviors.
Test Plan:
- Configured a bad `keyring`, hit a bunch of different errors.
- Used `bin/files generate-key` to try to generate bad keys, got appropriate errors ("raw doesn't support keys", etc).
- Used `bin/files generate-key` to generate an AES256 key.
- Put the new AES256 key into the `keyring`, without `default`.
- Uploaded a new file, verified it still uploaded as raw data (no `default` key yet).
- Used `bin/files encode` to change a file to ROT13 and back to raw. Verified old data got deleted and new data got stored properly.
- Used `bin/files encode --key ...` to explicitly convert a file to AES256 with my non-default key.
- Forced a re-encode of an AES256 file, verified the old data was deleted and a new key and IV were generated.
- Used `bin/files cycle` to try to cycle raw/rot13 files, got errors.
- Used `bin/files cycle` to cycle AES256 files. Verified metadata changed but file data did not. Verified file data was still decryptable with metadata.
- Ran `bin/files cycle --all`.
- Ran `encode` and `cycle` on chunked files, saw commands fail properly. These commands operate on the underlying data blocks, not the chunk metadata.
- Set key to `default`, uploaded a file, saw it stored as AES256.
- Read documentation.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11140
Differential Revision: https://secure.phabricator.com/D16127
Summary:
Ref T11140. This doesn't do anything yet since there's no way to enable it and no way to store master keys.
Those are slightly tougher problems and I'm not totally satisfied that I have an approach I really like for either problem, so I may wait for a bit before tackling them. Once they're solved, this does the mechanical encrypt/decrypt stuff, though.
This design is substantially similar to the AWS S3 server-side encryption design, and intended as an analog for it. The decisions AWS has made in design generally seem reasonable to me.
Each block of file data is encrypted with a unique key and a unique IV, and then that key and IV are encrypted with the master key (and a distinct, unique IV). This is better than just encrypting with the master key directly because:
- You can rotate the master key later and only need to re-encrypt a small amount of key data (about 48 bytes per file chunk), instead of re-encrypting all of the actual file data (up to 4MB per file chunk).
- Instead of putting the master key on every server, you can put it on some dedicated keyserver which accepts encrypted keys, decrypts them, and returns plaintext keys, and can send it 32-byte keys for decryption instead of 4MB blocks of file data.
- You have to compromise the master key, the database, AND the file store to get the file data. This is probably not much of a barrier realistically, but it does make attacks very slightly harder.
The "KeyRing" thing may change once I figure out how I want users to store master keys, but it was the simplest approach to get the unit tests working.
Test Plan:
- Ran unit tests.
- Dumped raw data, saw encrypted blob.
- No way to actually use this in the real application yet so it can't be tested too extensively.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11140
Differential Revision: https://secure.phabricator.com/D16124
Summary: Fixes T11156. These were never correct, but also never actually used until I made timelines load object handles unconditionally in D16111.
Test Plan: Viewed an auth provider with transactions, no more fatal.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11156
Differential Revision: https://secure.phabricator.com/D16128
Summary: Uses PHUITwoColumnView in Blog Manage and Blog Picture. Ref T9897
Test Plan: Use each page.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9897
Differential Revision: https://secure.phabricator.com/D16126
Summary: Adds some ordering options to PhamePost queries. Works on search, PhameHome, BlogHome
Test Plan: Try searching with Order By set to Date Published in application search, get correct order. Check a blog home page, check PhameHome.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9897
Differential Revision: https://secure.phabricator.com/D16125
Summary:
Ref T11140. When reading and writing files, we optionally apply a "storage format" to them.
The default format is "raw", which means we just store the raw data.
This change modularizes formats and adds a "rot13" format, which proves formatting works and is testable. In the future, I'll add real encryption formats.
Test Plan:
- Added unit tests.
- Viewed files in web UI.
- Changed a file's format to rot13, saw the data get rotated on display.
- Set default format to rot13:
- Uploaded a small file, verified data was stored as rot13.
- Uploaded a large file, verified metadata was stored as "raw" (just a type, no actual data) and blob data was stored as rot13.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11140
Differential Revision: https://secure.phabricator.com/D16122
Summary: Ref T11142. H264 video in a Quicktime container works in Safari and Firefox for me (although not Chrome), so include it in the default video mime types.
Test Plan: Uploaded video file from T11142 locally, saw it render with `<video />` properly in Safari.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11142
Differential Revision: https://secure.phabricator.com/D16121
Summary: Flips the bits from true to false in transaction editor.
Test Plan: update a post, search for new term
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9897
Differential Revision: https://secure.phabricator.com/D16120
Summary: Ref T9897, makes blogs searchable
Test Plan: Make a blog, index it, search for it.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9897
Differential Revision: https://secure.phabricator.com/D16119
Summary:
Ref T11098. Mixture of issues here:
- Similar problem to D16112, where users with no settings at all could fail to fall back to the global defaults.
- I made `UserPreferencesQuery` responsible for building defaults instead to simplify this, since we have 4 or 5 callsites which need to do it and they aren't easily reducible.
- Handle cases where `metamta.one-mail-per-recipient` is off (and thus users can not have any custom settings) more explicitly.
- When `metamta.one-mail-per-recipient` is off, remove the "Email Format" panel for users only -- administrators can still access it in global preferences.
Test Plan:
- Deleted a user's preferences, changed globals, purged cache, made sure defaults reflected global defaults.
- Changed global mail tags, sent mail to the user, verified it was dropped in accordinace with global settings.
- Changed user's settings to get the mail instead, verified mail was sent.
- Toggled user's Re / Vary settings, verified mail subject lines reflected user settings.
- Disabled `metamta.one-mail-per-recipient`, verified user "Email Format" panel vanished.
- Edited "Email Format" in single-mail-mode in global prefs as an administrator.
- Sent more mail, verified mail respected new global settings.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11098
Differential Revision: https://secure.phabricator.com/D16118
Summary: Ref T11098. There is no reason to maintain these as separate values now that they can be configured in global settings.
Test Plan:
- Hit and read setup issue.
- Fiddled with settings.
- I'll vet this more throughly in the next diff since I need to fix an issue with global defaults in mail and can explicitly test this at the same time.
Reviewers: chad
Reviewed By: chad
Subscribers: eadler
Maniphest Tasks: T11098
Differential Revision: https://secure.phabricator.com/D16117
Summary: Adds PhamePost object to fulltextsearch index. Some issue searching just "Open" though? Also "closed" objects search fine but don't display as disabled.
Test Plan:
bin/search index --type POST
{F1687043}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9897
Differential Revision: https://secure.phabricator.com/D16116
Summary: Ref T9789. Falling back to `parent::` is better, and fixes older-style feed stories for Pastes, like "added a comment".
Test Plan: Viewed a comment feed story about a paste.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9789
Differential Revision: https://secure.phabricator.com/D16114
Summary:
The option names for `Vary Subjects` are copypasta from the `Add "Re:" Prefix` option. Fix their names to refer to `Vary Subjects` instead.
Fixes T11148
Test Plan: Verify option names for `Vary Subjects` refer to `Add "Re:" Prefix` before apply. Verify they no longer do after apply.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Maniphest Tasks: T11148
Differential Revision: https://secure.phabricator.com/D16113
Summary:
Ref T9789. `Transaction` and `Editor` classes are the last major pieces of infrastructure that haven't been fully modularized.
Some of the specific issues are:
- `Editor` classes rely on a bunch of `instanceof` stuff in the base class to pick up transaction types like "subscribe", "projects", etc. Instead, applications should be adding these, and third-party applications should be able to add them.
- Code is spread across `Transaction` and `Editor` classes somewhat oddly. For example, generating old/new values would probably make more sense at the `Transaction` level, but it currently exists at the `Editor` level.
- Both types of classes have a lot of functions based on `switch()` statements, which require a ton of boilerplate and are just generally kind of hard to work with.
This creates classes for each type of transaction, and moves almost all of the logic to them. These classes are simpler and more focused than the old stuff was, and can organize related code better.
This starts inching toward defining `CoreTransactions` for features shared across applications. It only defines the "Create" transaction so far, but at some point I plan to move all the other shared transactions to Core and let them control which objects they're available for.
Test Plan:
- Created pastes with web UI and API.
- Edited all paste properites.
- Archived/activated.
- Verified files got reasonable names.
- Reviewed timeline and feed.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9789
Differential Revision: https://secure.phabricator.com/D16111
Summary:
Ref T11098. Users with at least one setting set correctly fall back to the defaults, but users with no settings at all currently do not.
Make them fall back to global defaults properly.
Test Plan:
- Set global defaults to some non-default setting.
- Completely delete a user's settings.
- `bin/cache purge --purge-all` or `--purge-user`.
- View settings as the user.
- Before change: showed hard-coded defaults instead of global defaults until you save anything.
- After change: properly shows global defaults from the start.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11098
Differential Revision: https://secure.phabricator.com/D16112
Summary:
Ref T11035. This only fixes half of the issue: comment editing has been fixed, but normal transactions which edit things like descriptions haven't yet.
The normal edits aren't fixed because the "oldValues" are populated too late. The code should start working once they get populated sooner, but I don't want to jump the gun on that since it'll probably have some spooky effects. I have some other transaction changes coming down the pipe which should provide a better context for testing "oldValue" population order.
Test Plan:
- Mentioned `@dog` in a comment.
- Removed `@dog` as a subscriber.
- Edited the comment, adding some unrelated text at the end (e.g., fixing a typo).
- Before change: `@dog` re-added as subscriber.
- After change: no re-add.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11035
Differential Revision: https://secure.phabricator.com/D16108
Summary: Adds a quick edit link to PhamePosts in ApplicationSearch
Test Plan: Review a few searches, click on pencil.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16109
Summary:
When having lots of repos, seeing "all revisions in this project" is hard, and we ended up adding herald rules to basically copy project tags to the revisions on a per-project basis. Adding a "tagged: project" function to the Repositories search field allows users to find differentials within a project.
Fix T10850.
Test Plan: search differentials by tagging project and repository in the Repository field
Reviewers: avivey, epriestley, #blessed_reviewers
Reviewed By: avivey, epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Maniphest Tasks: T10850
Differential Revision: https://secure.phabricator.com/D16096
Summary: Forgot to save this file locally. Adds isArchived to same hidden features as isDraft
Test Plan: test mail on archived posts
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16106
Summary: Ref T9897. Adds ability to Archive a Phame Post (only visible under ApplicationSearch).
Test Plan: Archive a post, re-publish it, search for it, archive it again. View Home, Blog, Live pages.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9897
Differential Revision: https://secure.phabricator.com/D16104
Summary: Fixes T11139. We missed this years ago when we moved to PhutilUTF8StringTruncator.
Test Plan: {F1686072}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11139
Differential Revision: https://secure.phabricator.com/D16105
Summary:
Ref T11137. This class is removed in D16099. Depends on D16099.
`PhutilURI` now attempts to "just work" with Git-style URIs, so at least in theory we can just delete all of this code and pretend it does not exist.
(I've left "Display URI" and "Effective URI" as distinct, at least for now, because I think the distinction may be relevant in the future even though it isn't right now, and to keep this diff small, although I may go remove one after I think about this for a bit.)
Test Plan:
- Created a new Git repository with a Git URI.
- Pulled/updated it, which now works correctly and should resolve the original issue in T11137.
- Verified that daemons now align the origin to a Git-style URI with a relative path, which should resolve the original issue in T11004.
- Grepped for `PhutilGitURI`.
- Also grepped in `arcanist/`, but found no matches, so no patch for that.
- Checked display/conduit URIs.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11137
Differential Revision: https://secure.phabricator.com/D16100
Summary:
Ref T7643. When a large block of prose text is edited (like a wiki page), summarize the diff when sending mail.
For now, I'm still showing the whole thing in the web UI, since it's a bit more manageable there.
Also try to fix newlines in Airmail.
Test Plan:
This web diff:
{F1682591}
..became this mail diff:
{F1682592}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7643
Differential Revision: https://secure.phabricator.com/D16098
Summary:
Ref T8510. Sort prefix matches above non-prefix matches, so that "Ape Discovery" does not match "discovery" better than "Discovery".
Sort functions last.
Rename function internal strings so they don't get over-promoted the prefix-match rules.
Add kind of a hack to get "Project X" sorting above all the "Project X (Milestone 1)" results.
Test Plan:
Created "Ape Discovery", "Baboon Discovery", "Chimpanzee Discovery", etc.
Main project now sorts above milestones:
{F1681773}
Prefix matches now sort above other matches:
{F1681774}
Function results (rarely used) are now less prominent:
{F1681775}
Better function results here:
{F1681776}
More function results:
{F1681777}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8510
Differential Revision: https://secure.phabricator.com/D16094
Summary: Ref T11120. If this works, I'll just remove this option completely.
Test Plan: ¯\_(ツ)_/¯
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11120
Differential Revision: https://secure.phabricator.com/D16095
Summary: "All Tasks" is bad in the long run and not clearly better for new installs.
Test Plan: Created a new smiple template, saw open tasks only.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D16093
Summary: Ref T10227. When we perform `git` http operations (fetch, mirror) check if we should use a proxy; if we should, set `http_proxy` or `https_proxy` in the environment to make `git` have `curl` use it.
Test Plan:
- Configured a proxy extension to run stuff through a local instance of Charles.
- Ran `repository pull` and `repository mirror`.
- Saw `git` HTTP requests route through the proxy.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10227
Differential Revision: https://secure.phabricator.com/D16092
Summary: Ref T11123. This implements a very basic skeleton for modern revision search.
Test Plan: Viewed and executed Conduit API method.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11123
Differential Revision: https://secure.phabricator.com/D16089
Summary: Ref T6523. Allows you to click stuff instead of using drag-and-drop.
Test Plan: On iOS simulator, created and updated a mock.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6523
Differential Revision: https://secure.phabricator.com/D16088
Summary: Fixes T10886. This should get more formal some day, but just fix it for now.
Test Plan: Reloaded mock with other unpublished draft inlines, saw accurate count.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10886
Differential Revision: https://secure.phabricator.com/D16087
Summary: Fixes T11115, but unclear how to test this. I think I've asked this in the past.
Test Plan:
- Visit Applications -> Ponder
- Configure external email
- Test External Email
- See new Question
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11115
Differential Revision: https://secure.phabricator.com/D16084
Summary: Ref T4280. At some point (probably D15732) we started getting anchor parsing wrong. Just pop the anchor off before doing all the logic, then put it back on at the end.
Test Plan:
Tested various forms like:
```
[[ x ]]
[[ x | z ]]
[[ x#y | z ]]
[[ ./x#y | z ]]
```
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4280
Differential Revision: https://secure.phabricator.com/D16083
Summary: Fixes T11113. On the 2nd+ page, we could end up with an ambiguous `id` WHERE clause because we don't define a primary table alias on this query. Define one.
Test Plan:
Changed SearchEngine to return pages of size 5, searched for my threads, toggled to second page, no exception.
Used DarkConsole to examine that second-page query, saw that it had `thread.id` explicitly instead of `id` implicitly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11113
Differential Revision: https://secure.phabricator.com/D16080
Summary:
Via HackerOne. This page fatals if accessed directly while logged out.
The "shouldRequireLogin()" check is wrong; this is a logged-in page.
Test Plan:
Viewed the page while logged out, no more fatal.
Faked my way through the actual verification flow.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D16077
Summary: Fixes T11107. The URI change here meant we were dropping the "key" parameter, which allows you to set a new password without knowing your old one.
Test Plan: Reset password, didn't need to provide old one anymore.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11107
Differential Revision: https://secure.phabricator.com/D16075
Summary: Ref T6916. Added video to remarkup using D7156 as reference.
Test Plan:
- Viewed video files (MP4, Ogg) in Safari, Chrome, Firefox (some don't work, e.g., OGG in Safari, but nothing we can really do about that).
- Used `alt`.
- Used `autoplay`.
- Used `loop`.
- Used `media=audio`.
- Viewed file detail page.
Reviewers: nateguchi2, chad, #blessed_reviewers
Reviewed By: chad, #blessed_reviewers
Subscribers: asherkin, ivo, joshuaspence, Korvin, epriestley
Tags: #remarkup
Maniphest Tasks: T6916
Differential Revision: https://secure.phabricator.com/D11297
Summary:
Ref T11098. This primarily fixes Conduit calls to `*.edit` methods failing when trying to access user preferences.
(The actual access is a little weird, since it seems like we're building some UI stuff inside a policy query, but that's an issue for another time.)
To fix this, consolidate the "we're about to run some kind of request with this user" code and run it consistently for web, conduit, and SSH sessions.
Additionally, make sure we swap things to the user's translation.
Test Plan:
- Ran `maniphest.edit` via `arc call-conduit`, no more settings exception.
- Set translation to ALL CAPS, got all caps output from `ssh` and Conduit.
Reviewers: avivey, chad
Reviewed By: chad
Maniphest Tasks: T11098
Differential Revision: https://secure.phabricator.com/D16066
Summary:
Ran into this while fixing T11098#179088.
The "Transaction Type" details in the conduit autogenerated documentation for `*.edit` endpoints still wraps incorrectly.
Test Plan: Purged remarkup cache, reloaded page, got full-width text.
Reviewers: avivey, chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D16065
Summary:
Ref T7643.
- When a transaction edits a text block, add a link to the changes (for HTML mail).
- Also, inline the changes in the mail (for HTML mail).
- Do nothing for text mail since I don't think we really have room? And I don't know how we can make the diff look any good.
Test Plan:
Edited a task description, generated mail, examined mail.
- It contained a link leading to a prose diff.
- It had a more-or-less reasonable inline text diff.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7643
Differential Revision: https://secure.phabricator.com/D16063
Summary:
Ref T10785. Around the time we launched Phacility SAAS we implemented this weird autologin hack. It works fine, so clean it up, get rid of the `instanceof` stuff, and support it for any OAuth2 provider.
(We could conceivably support OAuth1 as well, but no one has expressed an interest in it and I don't think I have any OAuth1 providers configured correctly locally so it would take a little bit to set up and test.)
Test Plan:
- Configured OAuth2 adapters (Facebook) for auto-login.
- Saw no config option on other adapters (LDAP).
- Nuked all options but one, did autologin with Facebook and Phabricator.
- Logged out, got logout screen.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10785
Differential Revision: https://secure.phabricator.com/D16060
Summary:
Ref T10856. The rendering logic was already there, but it was expecting the information under `properties`
field, whereas arc puts it under `metadata`. Not sure if that something that changed a long time ago or if
it was always like this.
Test Plan: {F1252657 size=full}
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T10856
Differential Revision: https://secure.phabricator.com/D15828
Summary:
Ref T3353. This hooks the prose engine up to the UI and throws away the hard-wrapping hacks.
These are likely still very rough in many cases, but are hopefully a big step forward from the old version in the vast majority of cases.
Test Plan: {F1677809}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T3353
Differential Revision: https://secure.phabricator.com/D16056
Summary:
Fixes T11088. When a task is removed from a project, we don't normally delete its column positions. If you accidentally remove a project and then restore the project, it's nice for the task to stay where you put it.
However, we do need to remove its positions in proxy columns to avoid the issue in T11088.
Test Plan:
- Added a failing unit test, made it pass.
- Added a task to "X > Milestone 1", loaded workboard, used "Edit Projects" to move it to "X" instead, loaded workboard.
- Before, it stayed in the "Milestone 1" column.
- After, it moves to the "Backlog" column.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11088
Differential Revision: https://secure.phabricator.com/D16052
Summary:
Ref T11098.
- Allow "Editor" to be set to the empty string.
- Don't match a validation error to a field unless the actual settings for the field and error match.
Test Plan:
- Tried to set "Editor" to "", success.
- Tried to set "Editor" to "javascript://", only that field got marked "Invalid".
Reviewers: avivey, chad
Reviewed By: chad
Maniphest Tasks: T11098
Differential Revision: https://secure.phabricator.com/D16051
Summary: Ref T11098. Template preferences don't have a user, but this codepath didn't get fully updated to account for that.
Test Plan: Saved mail tags in global prefernces.
Reviewers: avivey, chad
Reviewed By: chad
Maniphest Tasks: T11098
Differential Revision: https://secure.phabricator.com/D16050
Summary:
Ref T11098. We have a fair number of these, including links in email, which we can't turn into explicit `/user/` URIs.
Just redirect them to the modern places.
Test Plan: Clicked "Customize Menu..." on home page.
Reviewers: chad, avivey
Reviewed By: avivey
Subscribers: avivey
Maniphest Tasks: T11098
Differential Revision: https://secure.phabricator.com/D16049
Summary:
Ref T4103. This just adds a single global default setting group, not full profiles.
Primarily, I'm not sure how administrators are supposed to set profiles for users, since most ways user accounts get created don't really support setting roles.. When we figure that out, it should be reasonably easy to extend this. There also isn't much of a need for this now, since pretty much everyone just wants to turn off mail.
Test Plan:
- Edited personal settings.
- Edited global settings.
- Edited a bot's settings.
- Tried to edit some other user's settings.
- Saw defaults change appropriately as I edited global and personal settings.
{F1677266}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16048
Summary:
Ref T4103. If the database has `""` (empty string) for select/option settings, we can let that value be effective in the UI right now.
One consequence is that timestamps can vanish from the UI.
Instead, be stricter and discard it as an invalid value.
Test Plan:
- Forced `time-format` setting to `''`.
- Saw timestamps vanish before change.
- Saw timestamps return to the default value after change.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16047
Summary:
Ref T4103. Two small improvements:
- Don't work as hard to validate translations. We just need to know if a translation exists, we don't need to count how many strings it has and build the entire menu.
- Allow `getUserSetting()` to work on any setting without doing all the application/visibility checks. It's OK for code to look at, say, your "Conpherence Notifications" setting even if that application is not installed for you.
Test Plan: Used XHProf and saw 404 page drop from ~60ms to ~40ms locally.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16046
Summary:
Ref T10077. Currently, we issue 6+ queries on every page to build this menu, since the menu is built application-by-application.
Build the menu with dedicated modules instead so a single "EditEngine" module can provide all of them with one query.
I'd like to reduce this to 0 queries but I'm not totally sure what we want to do with this menu.
This change removes these items, because EditEngine can not currently provide them:
- Calendar: Eventually via EditEngine eventually.
- Conpherence: Probably via EditEngine, doesn't seem too important.
- People: Maybe via EditEngine, doesn't seem too important? "Welcome" is likely better?
- Pholio: Eventually via EditEngine.
It adds a bunch of other items as a side effect:
{F1677151}
This reduces the queries issued on every page by ~5.
This also makes quick create actions visible while logged out (see T7073).
Test Plan:
- Viewed menu while logged in.
- Viewed menu while logged out.
- Viewed standalone version of menu.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10077
Differential Revision: https://secure.phabricator.com/D16045
Summary:
Ref T10078. Currently, you toggle DarkConsole and then load a page, but on the load we have to refill your settings cache since toggling DarkConsole dirtied it.
This is fine, except that it makes it harder to understand what's going on with queries on a page. Just force it to reload right away instead.
Test Plan: Toggled DarkConsole, reloaded page, no longer saw settings toggle-related cache fill.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10078
Differential Revision: https://secure.phabricator.com/D16044
Summary: Ref T4103. Ref T10078. We currently have separate "usable" and "raw" values, but can simplify this by making `newValueForUsers()` return the raw value.
Test Plan: Ran unit tests; browsed around; dropped caches and browsed around.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103, T10078
Differential Revision: https://secure.phabricator.com/D16043
Summary:
Ref T4103. Ref T10078. This puts a user cache in front of notification and message counts.
This reduces the number of queries issued on every page by 4 (2x building the menu, 2x building Quicksand data).
Also fixes some minor issues:
- Daemons could choke on sending mail in the user's translation.
- No-op object updates could fail in the daemons.
- Questionable data access pattern in the file query coming out of the profile file cache.
Test Plan:
- Sent myself notifications. Saw count go up.
- Cleared them by visiting objects and clearing all notifications. Saw count go down.
- Sent myself messages. Saw count go up.
- Cleared them by visiting threads. Saw count go down.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103, T10078
Differential Revision: https://secure.phabricator.com/D16041
Summary:
Ref T4103. Ref T10078. This moves profile image caches to new usercache infrastructure.
These dirty automatically based on configuration and User properties, so add some stuff to make that happen.
This reduces the number of queries issued on every page by 1.
Test Plan: Browsed around, changed profile image, viewed as self, viewed as another user, verified no more query to pull this information on every page
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103, T10078
Differential Revision: https://secure.phabricator.com/D16040
Summary:
Ref T4103. Ref T10078. Currently, when a user misses a cache we just build it for them.
This is the behavior we want for the the viewer (so we don't have to build every cache up front if we don't actually need them), but not the right behavior for other users (since it allows performance problems to go undetected).
Make inline cache generation strict by default, then make sure all the things that rely on cache data request the correct data (well, all of the things identified by unit tests, at least: there might be some more stuff I haven't hit yet).
This fixes test failures in D16040, and backports a piece of that change.
Test Plan: Identified and then fixed failures with `arc unit --everything`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103, T10078
Differential Revision: https://secure.phabricator.com/D16042
Summary: Ref T4103. This method has no more callers.
Test Plan: `grep`
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16039
Summary:
Ref T4103. This isn't completely perfect but should let us move forward without also expanding scope into "too much mail".
I split the existing "Mail Preferences" into two panels: a "Mail Delivery" panel for the EditEngine settings, and a "2000000 dropdowns" panel for the two million dropdowns. This one retains the old code more or less unmodified.
Test Plan:
- Ran unit tests, which cover most of this stuff.
- Grepped for all removed constants.
- Ran migrations, inspected database results.
- Changed settings in both modified panels.
- This covers a lot of ground, but anything I missed will hopefully be fairly obvious.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16038
Summary: Ref T4103. Also get rid of the weird cache clear that nothing else uses and which we don't actually need.
Test Plan:
- Resolved timezone conflict by ignoring it.
- Resolved timezone conflict by picking a valid timezone.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16037
Summary: Fixes T8846. Ref T4103. I just took the shortest reasonable path here, this panel could use some attention on the next Conpherence iteration.
Test Plan: Turned on/off desktop notifications. Observed corresponding behavior in test notifications.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103, T8846
Differential Revision: https://secure.phabricator.com/D16036
Summary:
Ref T4103. Some settings (mostly nav collapsed/expanded states) use this endpoint to make adjustments when users press keys (like `\` to toggle the durable column).
All of these settings are now formal, so swap things over to transactions.
Test Plan: Collapsed/expanded various navs, reloaded pages, settings stuck.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16035
Summary: Ref T4103. Provide a CLI mechanism for purging the user cache.
Test Plan:
- Purged with `--purge-user` and `--purge-all`.
- Verified cache table got wiped.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16033
Summary: Ref T4103. Fully modernize the filetree show/hide, durable column show/hide, and profile menu collapse/wide settings.
Test Plan:
- Toggled filetree on/off, reloaded page, setting stuck.
- Same with conpherence column and profile menus.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16034
Summary: Ref T4103. This primarily makes sure the console gets turned on when you enable it so you aren't like "where's the console???"
Test Plan: Enabled console, saw console.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16030
Summary:
Ref T4103. These settings long-predate proper settings and are based on hard-coded user properties. Turn them into real settings.
(I didn't try to migrate the value since they're trivial to restore and only useful to developers.)
Test Plan:
- Toggled console on/off.
- Swapped tabs.
- Reloaded page, everything stayed sticky.
Reviewers: chad
Reviewed By: chad
Subscribers: eadler
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16029
Summary:
Ref T4103. A few bits here:
- We have an ancient "tiles" preference which was just a fallback from 2-3 years ago. Throw that away.
- Modenize the other pinned stuff. We should likely revisit this after the next homepage update but I just left the actual defaults alone for now.
- Lightly prepare for global default editing.
- Add a "reset to defaults" option.
Test Plan:
- Pinned, unpinned, reordered and reset application homepage order.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16028
Summary:
Ref T4103. Convert this into a proper internal setting and use transactions to mutate it.
Also remove some no-longer-used old non-modular settings constants.
Test Plan:
- Used policy dropdown, saw recently-used projects.
- Selected some new projects, saw them appear.
- Grepped for all removed constants.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16027
Summary: Ref T4103. Modernize the blame/color toggles in Diffusion. These have no separate settings UI.
Test Plan: Toggled blame and colors, reloaded pages, settings stuck.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16026
Summary:
Ref T4103. Conpherence is doing some weird stuff and has its own redudnant settings object.
- Get rid of `ConpherenceSettings`.
- Use `getUserSetting()` instead of `loadPreferences()`.
- When applying transactions, add a new mechanism to efficiently prefill caches (this will still work anyway, but it's slower if we don't bulk-fetch).
Test Plan:
- Changed global Conpherence setting.
- Created a new Conpherence, saw setting set to global default.
- Changed local room setting.
- Submitted messages.
- Saw cache prefill for all particpiants in database.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16025
Summary: Ref T4103. This isn't necessary or particularly useful anymore since panels have been converted.
Test Plan: Visited URI, got a 404.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16024
Summary: Ref T4103. This converts other straightforward panels to modern stuff.
Test Plan:
- Edited various settings.
- Tried to set a bogus editor value.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16023
Summary: Ref T4103. Only trick here is hiding the panel if Conpherence is not installed.
Test Plan:
- Edited Conpherence preferences.
- Uninstalled Conpherence, saw panel vanish.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16022
Summary:
Ref T4103. Some settings (like the collapsed/expanded state of the diff filetree) are currently ad-hoc. They weren't being read correctly.
Also, simplify the caching code a little bit.
Test Plan: Toggled filetree, reloaded page, got sticky behavior.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16021
Summary:
Ref T4103. Settings panels are grouped into categories of similar panels (like "Email" or "Sessions and Logs").
Currently, this is done informally, by just grouping and ordering by strings. This won't work well with translations, since it means the ordering is entirely dependent on the language order, so the first settings panel you see might be something irrelvant or confusing. We'd also potentially break third-party stuff by changing strings, but do so in a silent hard-to-detect way.
Provide formal objects and modularize the panel groups completely.
Test Plan: Verified all panels still appear properly and in the same groups and order.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16020
Summary:
Ref T4103. We have a couple of settings like this where changing one setting changes another (e.g., enabling DarkConsole makes the console visible).
Provide a mechanism to let changing timezone really mean "change timezone, and also clear the timezone offset".
Test Plan: Swapped timezones, reconciled them by ignoring the offset, changed timezone again to another zone with the same offset, got asked to reconcile again.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16018
Summary:
Ref T4103. This pretty much replaces these panels in-place with similar looking ones that go through EditEngine.
This has a few rough edges but they're pretty minor and/or hard to hit (for example, when editing another user's settings, the crumbs have a redundant link in them).
Test Plan:
- Edited my own settings.
- Edited a bot user's settings.
- Tried to edit another user's settings (failed).
{F1674465}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16017
Summary:
Ref T4103. This is just incremental cleanup:
- Add "internal" settings, which aren't editable via the UI. They can still do validation and run through the normal pathway. Move a couple settings to use this.
- Remove `getPreference()` on `PhabricatorUser`, which was a sort of prototype version of `getUserSetting()`.
- Make `getUserSetting()` validate setting values before returning them, to improve robustness if we change allowable values later.
- Add a user setting cache, since reading user settings was getting fairly expensive on Calendar.
- Improve performance of setting validation for timezone setting (don't require building/computing all timezone offsets).
- Since we have the cache anyway, make the timezone override a little more general in its approach.
- Move editor stuff to use `getUserSetting()`.
Test Plan:
- Changed search scopes.
- Reconciled local and server timezone settings by ignoring and changing timezones.
- Changed date/time settings, browsed Calendar, queried date ranges.
- Verified editor links generate properly in Diffusion.
- Browsed around with time/date settings looking at timestamps.
- Grepped for `getPreference()`, nuked all the ones coming off `$user` or `$viewer` that I could find.
- Changed accessiblity to high-contrast colors.
- Ran all unit tests.
- Grepped for removed constants.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16015
Summary:
Ref T4103. This is a weird standalone setting that I didn't clean up earlier.
Also fix an issue with the PronounSetting and the Editor not interacting properly.
Test Plan: Edited using new EditEngine UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16014
Summary: Change metamta.differential.patch-format over to an enum option now that they're implemented.
Test Plan: Looked at settings page.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D16032
Summary:
Ref T11092. With Quicksand (or, possibly, some as-yet-unknown non-Quicksand workflow) the client can get stuck with an out-of-date revision PHID.
We then save comments with a `revisionPHID` from one revision and a `changesetID` from a different one.
Detect and prevent this. This stops the workflow immediately when the use first clicks, so it should allow us to detect this issue if it has some other non-Quicksand cause.
Test Plan:
- Opened revision `D123`.
- Pressed `\` to enable the sidebar and Quicksand.
- Clicked a link to revision `D124`.
- Added inlines.
Previously, these could ghost. The exact UI behavior is difficult to describe, but in the database they end up with a `changesetID` for `D124` but the original `revisionPHID` for `D123`, presumably because state is sticking around from the first page.
After this patch, an exception is thrown immediately. Additionally:
- Reloaded to clear quicksand state, added comments fine.
- Disabled sidebar/quicksand, added comments fine.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11092
Differential Revision: https://secure.phabricator.com/D16031
Summary:
Ref T11076. Ref T9897. Bad links on Phame blogs are currently made worse because we try to prompt you to login on a non-cookie domain.
Instead, just 404 in a vanilla way. Do so cleanly on external domains.
Test Plan: {F1672399}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9897, T11076
Differential Revision: https://secure.phabricator.com/D16010
Summary:
Fixes T11082. Currently, the `/123/` and `/CALLSIGN/` versions of the URI get the same score.
Also the scores are backwards.
Test Plan:
- Added `getPublicCloneURI()` output to repository listing.
- Before patch, saw a repository with a callsign list a less-preferred ID-based URI.
- After patch, saw the repository list the more-preferred callsign-based URI.
Reviewers: chad
Reviewed By: chad
Subscribers: nikolay.metchev
Maniphest Tasks: T11082
Differential Revision: https://secure.phabricator.com/D16008
Summary:
Ref T4103. These are currently stored on the user, for historic/performance reasons.
Since I want administrators to be able to set defaults for translations and timezones at a minimum and there's no longer a meaningful performance penalty for moving them off the user record, turn them into real preferences and then nuke the columns.
Test Plan:
- Set settings to unusual values.
- Ran migrations.
- Verified my unusual settings survived.
- Created a new user.
- Edited all settings with old and new UIs.
- Reconciled client/server timezone disagreement.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16005
Summary:
Ref T4103. This doesn't get everything, but takes care of most of the easy stuff.
The tricky-ish bit here is that I need to move timezones, pronouns and translations to proper settings. I expect to pursue that next.
Test Plan:
- Grepped for `loadPreferences` to identify callsites.
- Changed start-of-week setting, loaded Calendar, saw correct start.
- Visited welcome page, read "Adjust Settings" point.
- Loaded Conpherence -- I changed behavior here slightly (switching threads drops the title glyph) but it wasn't consistent to start with and this seems like a good thing to push to the next version of Conpherence.
- Enabled Filetree, toggled in Differential.
- Disabled Filetree, no longer visible in Differential.
- Changed "Unified Diffs" preference to "Small Screens" vs "Always".
- Toggled filetree in Diffusion.
- Edited a task, saw sensible projects in policy dropdown.
- Viewed user profile, uncollapsed/collapsed side nav, reloaded page, sticky'd.
- Toggled "monospaced textareas", used a comment box, got appropriate fonts.
- Toggled durable column.
- Disabled title glyphs.
- Changed monospaced font to 18px/36px impact.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16004
Summary:
Ref T4103. Currently, we issue a `SELECT * FROM user_preferences ... WHERE userPHID = ...` on every page to load the viewer's settings.
There are several other questionable data accesses on every page too, most of which could benefit from improved caching strategies (see T4103#178122).
This query will soon get more expensive, since it may need to load several objects (e.g., the user's settings and their "role profile" settings). Although we could put that data on the User and do both in one query, it's nicer to put it on the Preferences object ("This inherits from profile X") which means we need to do several queries.
Rather than paying a greater price, we can cheat this stuff into the existing query where we load the user's session by providing a user cache table and doing some JOIN magic. This lets us issue one query and try to get cache hits on a bunch of caches cheaply (well, we'll be in trouble at the MySQL JOIN limit of 61 tables, but have some headroom).
For now, just get it working:
- Add the table.
- Try to get user settings "for free" when we load the session.
- If we miss, fill user settings into the cache on-demand.
- We only use this in one place (DarkConsole) for now. I'll use it more widely in the next diff.
Test Plan:
- Loaded page as logged-in user.
- Loaded page as logged-out user.
- Examined session query to see cache joins.
- Changed settings, saw database cache fill.
- Toggled DarkConsole on and off.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16001
Summary:
Ref T4103. This tackles all the easy stuff. Not yet handled:
- Translation, pronoun, timezone: these are weird and stored on the User object instead of in settings.
- Conpherence default: actually just missed this one, it's normal.
- 1000 dropdowns for email notification preferences (messy, technically).
Test Plan:
wow look at all these settings
{F1670442}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D15999
Summary:
Ref T6299. This makes more of the links point to the right places.
Not covered yet:
- Projects and subscribers don't point to the right place (this is a little tricky to fix, I think).
- `[[ #anchor ]]`s won't do the right thing in, uh, email, I guess, since `uri.here` is not set. This is also a little tricky.
Possibly we should just remove subscribers (although also kind of tricky).
Test Plan: On a custom-domain blog, observed that fewer things were broken.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6299
Differential Revision: https://secure.phabricator.com/D16007
Summary: If you try to join or add members to a parent project, we currently return 404. This instead adds an informational dialog. Fixes T11055
Test Plan: Click on Join Project and Add Members while on a Parent Project or Milestone.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11055
Differential Revision: https://secure.phabricator.com/D16000
Summary: Ref T4103. Just porting these directly for now, no attempt to organize things yet.
Test Plan: {F1669263}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D15997
Test Plan: click new link, get to the right page
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15996
Summary: Ref T4103. This starts breaking out settings in a modern way to prepare for global defaults.
Test Plan:
- Edited diff settings.
- Saw them take effect in primary settings pane.
- Set stuff to new automatic defaults.
- Tried to edit another user's settings.
- Edited a bot's settings as an administrator.
{F1669077}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D15995
Summary:
Ref T4103. This give preferences a PHID, policy/transaction interfaces, a transaction table, and a Query class.
This doesn't actually change how they're edited, yet.
Test Plan:
- Ran migrations.
- Inspected database for date created, date modified, PHIDs.
- Changed some of my preferences.
- Deleted a user's preferences, verified they reset properly.
- Set some preferences as a new user, got a new row.
- Destroyed a user, verified their preferences were destroyed.
- Sent Conpherence messages.
- Send mail.
- Tried to edit another user's settings.
- Tried to edit a bot's settings as a non-admin.
- Edited a bot's settings as an admin (technically, none of the editable settings are actually stored in the settings table, currently).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D15991
Summary:
Ref T10769. The user availability cache write shouldn't happen in read-only mode, nor should the Differential parse cache write.
(We might want to turn off the availbility feature completely since it's potentially expensive if we can't cache it, but I think we're OK for now.)
Test Plan:
In read-only mode:
- Browsed as a user with an out-of-date availability cache.
- Loaded an older revision without cached parse data.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10769
Differential Revision: https://secure.phabricator.com/D15988
Summary:
Ref T4292. For hosted, clustered repositories we have a good way to increment the internal version of the repository: every time a user pushes something, we increment the version by 1.
We don't have a great way to do this for observed/remote repositories because when we `git fetch` we might get nothing, or we might get some changes, and we can't easily tell //what// changes we got.
For example, if we see that another node is at "version 97", and we do a fetch and see some changes, we don't know if we're in sync with them (i.e., also at "version 97") or ahead of them (at "version 98").
This implements a simple way to version an observed repository:
- Take the head of every branch/tag.
- Look them up.
- Pick the biggest internal ID number.
This will work //except// when branches are deleted, which could cause the version to go backward if the "biggest commit" is the one that was deleted. This should be OK, since it's rare and the effects are minor and the repository will "self-heal" on the next actual push.
Test Plan:
- Created an observed repository.
- Ran `bin/repository update` and observed a sensible version number appear in the version table.
- Pushed to the remote, did another update, saw a sensible update.
- Did an update with no push, saw no effect on version number.
- Toggled repository to hosted, saw the version reset.
- Simulated read traffic to out-of-sync node, saw it do a remote fetch.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15986
Summary:
Ref T11051. This is still not as clear as it should be, but is at least working as intended now.
I believe this part of the code just never worked. The test plan on D10489 didn't specifically cover it.
Test Plan:
Did this sort of thing in a repository:
```
$ git checkout -b featurex
$ echo x >> y
$ git commit -am wip
$ arc diff
```
Then I simulated just pushing it (this flow is a little more involved than necessary):
```
$ arc land --hold
$ git commit --amend
$ # remove all metadata -- particularly, "Differential Revision"!
$ git push HEAD:master
```
I got a not-great but more-useful dialog:
{F1667318}
Prior to this change, the hash match was incorrectly not reported at all.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11051
Differential Revision: https://secure.phabricator.com/D15989
Summary:
Fixes T11043. This page was still reading the old information directly instead of going through the cluster-aware stuff.
Have it ask the cluster-aware stuff for information instead.
Test Plan:
- Nuked MySQL on localhost.
- Configured cluster hosts.
- Loaded "Database Status" page -- worked after patch.
- Grepped for any remaining `mysql.configuration-provider` stragglers, came up empty.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11043
Differential Revision: https://secure.phabricator.com/D15982
Summary:
Fixes T8510. Results are internally ordered by "name", which is the full list of strings a user can type to match a result. On the balance, it is probably good/correct to order by this (particularly, it allows `function(x)` to sort near `x`).
However, the way projects were built put the tags first, so a project like "Discovery" could end up last if it had originally been created with a different name like "Search Team", so that its first slug is "search-team".
Instead, put the display name first in the ordering.
Test Plan:
{F1661775}
To reproduce in particular:
- Create a project named "Zebra".
- Create a lot of projects named "Armadillo-blahblahblah".
- Rename "Zebra" to "Armadillo".
Before the patch, the new "Armadillo" project would still sort as though it were named "Zebra". After the patch, it sorts as expected normally.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8510
Differential Revision: https://secure.phabricator.com/D15981
Summary: Ref T5267. Put "Deutsch" in the list instead of "German", so you can find your language without knowing the English word for it.
Test Plan: {F1661598}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5267
Differential Revision: https://secure.phabricator.com/D15980
Summary:
Ref T5267. Ref T4103. Currently, adding new locale support to the upstream fills this menu with confusing options which don't do anything. Separate it into four groups:
- Translations: these have a "reasonable number" of strings and you'll probably see some obvious effect if you switch to the translation.
- Limited Translations: these have very few or no strings, and include locales which we've added but don't ship translations for.
- Silly Translations: Pirate english, etc.
- Test Translations: ALLCAPS, raw strings, etc.
Czech is currently in "test" instead of "limited" for historical reasons; I'll remedy this in the next change.
Test Plan: {F1661523}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103, T5267
Differential Revision: https://secure.phabricator.com/D15978
Summary:
Ref T4103. This removes these options:
{F1660585}
The jump nav option came from T916, when we had a separate jump nav on the home page. Essentially no one has ever been confused by the behavior of search or disabled this feature. Here are the stats for this install:
| Total Users | 36656 |
| Have Set Any Preference | 3084 |
| Have Disabled Jump | 6
| Are Not "Security Researchers" | 2
| Any Account Activity | 0
The "/" option came in the same change, but the preference came from T989. This keystroke conflicts with a default Firefox keystroke. Almost no one cares about this either, but I count 6 real users who have disabled the behavior. I suspect the number of real users who //use// it may be smaller.
In Safari and Firefox, the "tab" key does the same thing.
In Chrome, the "tab" key does the same thing if {nav Preferences > Web Content > "Pressing Tab highlights..."} is disabled.
Upshot: jump nav is great, bulk of the change in T989 was clearly great, specific preferences that came out of it seem not-so-great and now is a good time to kill them as we head into T4103.
Test Plan:
- Grepped for removed constants.
- Pressed "/".
- Searched for `T123`.
- Viewed settings.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D15976
Summary:
Fixes T11030. Fixes T11032.
- Allow HTTP access to "Public" repositories even if `diffusion.allow-http-auth` is disabled.
- If you run Phabricator on an unusual port (???) use that port as the default when generating HTTP URIs.
Test Plan:
- Faked `phabricator.base-uri` to an unusual port, saw repository HTTP URI generate with an unusual port.
- Disabled `diffusion.allow-http-auth`, confirmed that toggling view policy between "public" and "users" activated or deactivated HTTP clone URI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11030, T11032
Differential Revision: https://secure.phabricator.com/D15973
Summary:
Ref T11016. I think I inverted the meaning of this function by accident in D14893.
The intent is to return a list of users: direct users, and all members of all projects.
Prior to this patch actually returns direct users, and all projects they are members of.
Test Plan:
- Created "Project with Dog".
- Added user "dog" to project.
- Created package "X", owning file "/x", with audit enabled.
- Made "X" owned by "Project with Dog".
- Modified "/x" and had user "dog" accept it.
- Landed change.
- Prior to change: package "X" incorrectly added as auditor.
- After change: package "X" correctly omitted as auditor, because a member reviewed the change.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11016
Differential Revision: https://secure.phabricator.com/D15971
Summary:
Fixes T11017. We add packages as "uninteresting" auditors so that we can query commits by package later.
Until recently, this didn't matter because we didn't send mail to packages. But now we do, so stop mailing them when they don't actually need to do anything.
Test Plan:
- Made a commit to a file which was part of a package but which I owned (so it does not trigger auditing).
- `var_dump()`'d mail "To:" PHIDs.
- Before patch: included package.
- After patch: no package.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11017
Differential Revision: https://secure.phabricator.com/D15970
Summary:
Fixes T11020. I think this resolves things -- `$new_version` (set above) should be used, not `$new_log` directly.
Specifically, we would get into trouble if the initial push failed for some reason (working copy not initialized yet, commit hook rejected, etc).
Test Plan: Made a bad push to a new repository. Saw it freeze before the patch and succeed afterwards.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11020
Differential Revision: https://secure.phabricator.com/D15969
Summary: Fixes T11010. This also needs to be inflated until we fix the whole client/server responsibility issue here.
Test Plan:
- Created a revision while observing error log, no error.
- Disabled "allow self accept", tried to make myself a reviewer, got rejected with an error message.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11010
Differential Revision: https://secure.phabricator.com/D15966
Summary: Ref T9606, Clicking on the calendar preview header in user's profile page should link to user's full month calendar
Test Plan: Open user profile, scroll to calendar preview, click on Calendar box header. This should open the month calendar for the user (not viewer)
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T9606
Differential Revision: https://secure.phabricator.com/D15967
Summary: Hover hint on calendar list items should be to the right in day view, left in profile view, on top in month view
Test Plan: Open profile view, calendar items should have a left hover. Open day view, calendar items should have a right hover. Open month view, calendar items should have top hover.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T9606
Differential Revision: https://secure.phabricator.com/D15964
Summary: Ref T9606
Test Plan: Open people profile for a user with events today/tomorrow, see a panel under badges panel with event list
Reviewers: chad, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T9606
Differential Revision: https://secure.phabricator.com/D15851
Summary:
Ref T3025.
- Show current zone to make the current vs new more clear.
- Tweak some text.
Test Plan: {F1656534}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T3025
Differential Revision: https://secure.phabricator.com/D15965
Summary:
Fixes T10381. When we converted to `PHUIRemarkupView`, some instructional text got linebreaks added when it shouldn't have them (the source is written in PHP and wrapped at 80 characters, but the output should flow naturally).
Fix this so we don't preserve linebreaks.
This also makes `PHUIRemarkupView` a little more powerful and inches us toward fixing Phame/CORGI remarkup issues, getting rid of `PhabricatorMarkupInterface` / `PhabricatorMarkupOneOff`, and dropping all the application hard-coding in `PhabricatorMarkupEngine`.
Test Plan:
- Grepped for all callsites, looking for callsites which accept remarkup written in `<<<HEREDOC` format.
- Viewed form instructions, Conduit API methods, HTTP parameter edit instructions.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10381
Differential Revision: https://secure.phabricator.com/D15963
Summary:
Ref T3025. Chrome gives us an easily-accessible, much better guess at which timezone the user is in.
Firefox also exposes "Intl" but this doesn't seem to be a reliable method to read the timezone.
Test Plan:
In Chrome, swapped my system date/time between zones, clicked the "reconcile" popup, got the dropdown prefilled accurately.
In Safari (no `Intl` API) got the normal flow with no default selected.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T3025
Differential Revision: https://secure.phabricator.com/D15962
Summary: Ref T10512. This is fairly bare-bones but appears to work.
Test Plan: Queried all users, queried some stuff by constraints.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10512
Differential Revision: https://secure.phabricator.com/D15959
Summary: Ref T3025. This adds a check for different client/server timezone offsets and gives users an option to fix them or ignore them.
Test Plan:
- Fiddled with timezone in Settings and System Preferences.
- Got appropriate prompts and behavior after simulating various trips to and from exotic locales.
In particular, this slightly tricky case seems to work correctly:
- Travel to NY.
- Ignore discrepancy (you're only there for a couple hours for an important meeting, and returning to SF on a later flight).
- Return to SF for a few days.
- Travel back to NY.
- You should be prompted again, since you left the timezone after you ignored the discrepancy.
{F1654528}
{F1654529}
{F1654530}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T3025
Differential Revision: https://secure.phabricator.com/D15961
Summary:
Ref T5187. This definitely feels a bit flimsy and I'm going to hold it until I cut the release since it changes a couple of things about Workflow in general, but it seems to work OK and most of it is fine.
The intent is described in T5187#176236.
In practice, most of that works like I describe, then the `phui-file-upload` behavior gets some weird glue to figure out if the input is part of the form. Not the most elegant system, but I think it'll hold until we come up with many reasons to write a lot more Javascript.
Test Plan:
Used both drag-and-drop and the upload dialog to upload files in Safari, Firefox and Chrome.
{F1653716}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5187
Differential Revision: https://secure.phabricator.com/D15953
Summary: Makes the background transparent for uploaded thumbs. This page in general needs lots of work, but here's the minimum. Fixes T10986
Test Plan: Edit a Mock with a transparent jeff.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10986
Differential Revision: https://secure.phabricator.com/D15957
Summary: Couple of edge cases here I never cleaned up. This inlines points and projects better, with spacing and use of grey to better differentate from project tag colors.
Test Plan:
Review edge cases on workboard with multiple short and long project names.
{F1653998}
{F1653999}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15956
Summary: Converts to table so text wraps on long strings well, button always stays top right, better spacing underneath.
Test Plan: Mail, Gmail, mobile
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15955
Summary:
Ref T10939. This makes the `viewer()` function work again. It retains its own meaning (viewer, plus all their projects and packages).
There's no `exact-viewer()` function; we could conceivably add one eventually if we need it.
Test Plan:
- Queried for `viewer()`, got the same results as querying by my own username.
- Browsed function in token browser.
- Reviewed autogenerated documentation.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10939
Differential Revision: https://secure.phabricator.com/D15951
Summary:
Ref T10939. If you haven't installed a dashboard, we show an "Active Revisions" panel on the homepage by default. I waited a bit to update this, but the new buckets don't seem to have caused any major problems so far.
Update this to use the new logic. I'm just showing "must review" + "should review", which is similar to the old beahvior.
Also replace the notification count with this same number. This is a little different from the old behavior, but simpler, and I think we should probably move toward getting rid of these counts completely.
Test Plan:
- Viewed homepage as logged-in user, saw my revisions (including revisions I have authority over only because of project membership).
- Saw consistent notification count.
- Grepped for removed method.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10939
Differential Revision: https://secure.phabricator.com/D15950
Summary: Ref T10917. This is getting added as a link right now, which causes it to get `<a href>`'d in HTML mail. Add it as text instead.
Test Plan: Edited a key, examined HTML mail body carefully.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10917
Differential Revision: https://secure.phabricator.com/D15952
Summary:
Ref T10917. This cheats fairly heavily to generate SSH key mail:
- Generate normal transaction mail.
- Force it to go to the user.
- Use `setForceDelivery()` to force it to actually be delivered.
- Add some warning language to the mail body.
This doesn't move us much closer to Glorious Infrastructure for this whole class of events, but should do what it needs to for now and doesn't really require anything sketchy.
Test Plan: Created and edited SSH keys, got security notice mail.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10917
Differential Revision: https://secure.phabricator.com/D15948
Summary:
Ref T10917. Converts web UI edits to transactions.
This is about 95% "the right way", and then I cheated on the last 5% instead of building a real EditEngine. We don't need it for anything else right now and some of the dialog workflows here are a little weird so I'm just planning to skip it for the moment unless it ends up being easier to do after the next phase (mail notifications) or something like that.
Test Plan: {F1652160}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10917
Differential Revision: https://secure.phabricator.com/D15947
Summary:
Ref T10917. This primarily prepares these for transactions by giving us a place to:
- review old deactivated keys; and
- review changes to keys.
Future changes will add transactions and a timeline so key changes are recorded exhaustively and can be more easily audited.
Test Plan:
{F1652089}
{F1652090}
{F1652091}
{F1652092}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10917
Differential Revision: https://secure.phabricator.com/D15946
Summary:
Via HackerOne. Currently, you can use "Lock Permanently" to lock a credential permanently, but you can still enable Conduit API access to it. This directly contradicts both intent of the setting and its description as presented to the user.
Instead:
- When a credential is locked, revoke Conduit API access.
- Prevent API access from being enabled for locked credentials.
- Prevent API access to locked credentials, period.
Test Plan:
- Created a credential.
- Enabled API access.
- Locked credential.
- Saw API access become disabled.
- Tried to enable API access; was rebuffed.
- Queried credential via API, wasn't granted access.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15944
Summary:
Ref T10917. Currently, when you delete an SSH key, we really truly delete it forever.
This isn't very consistent with other applications, but we built this stuff a long time ago before we were as rigorous about retaining data and making it auditable.
In partiular, destroying data isn't good for auditing after security issues, since it means we can't show you logs of any changes an attacker might have made to your keys.
To prepare to improve this, stop destoying data. This will allow later changes to become transaction-oriented and show normal transaction logs.
The tricky part here is that we have a `UNIQUE KEY` on the public key part of the key.
Instead, I changed this to `UNIQUE (key, isActive)`, where `isActive` is a nullable boolean column. This works because MySQL does not enforce "unique" if part of the key is `NULL`.
So you can't have two rows with `("A", 1)`, but you can have as many rows as you want with `("A", null)`. This lets us keep the "each key may only be active for one user/object" rule without requiring us to delete any data.
Test Plan:
- Ran schema changes.
- Viewed public keys.
- Tried to add a duplicate key, got rejected (already associated with another object).
- Deleted SSH key.
- Verified that the key was no longer actually deleted from the database, just marked inactive (in future changes, I'll update the UI to be more clear about this).
- Uploaded a new copy of the same public key, worked fine (no duplicate key rejection).
- Tried to upload yet another copy, got rejected.
- Generated a new keypair.
- Tried to upload a duplicate to an Almanac device, got rejected.
- Generated a new pair for a device.
- Trusted a device key.
- Untrusted a device key.
- "Deleted" a device key.
- Tried to trust a deleted device key, got "inactive" message.
- Ran `bin/ssh-auth`, got good output with unique keys.
- Ran `cat ~/.ssh/id_rsa.pub | ./bin/ssh-auth-key`, got good output with one key.
- Used `auth.querypublickeys` Conduit method to query keys, got good active keys.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10917
Differential Revision: https://secure.phabricator.com/D15943
Summary: Ref T10694. Switch default mode to HTML since it has a number of significant advantages and we haven't seen reports of significant problems.
Test Plan:
- Switched preference to default (saw "HTML" in UI).
- Sent myself some mail.
- Got HTML mail.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10694
Differential Revision: https://secure.phabricator.com/D15885
Summary:
Ref T10694. If this feels good, I'd plan to eventually add something similar to other applications ("View Task", etc).
Not sure if we should keep the object link later in the mail body or not. I left it for now.
Test Plan: {F1307256, size=full}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10694
Differential Revision: https://secure.phabricator.com/D15884
Summary: Wow! Real value here.
Test Plan: No more red underlines.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15941
Summary: Fixes T10493. See that task and inline comments for discussion.
Test Plan:
Created an object with some projects, saw the transaction in resulting mail:
{F1600496}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10493
Differential Revision: https://secure.phabricator.com/D15942
Fixes T10981. Ref T10939. `arc` currently has some odd, hard-coded checks
(missing reviewers, all reviewers away) that depend on the field value being
in a certain format.
The recent changes swapped the field value from scalars (PHIDs) to
dictionaries and broke this workflow. It worked fine in testing because we
apply these checks very inconsistently (not on update or `--edit`).
To get around this for now, serialize into "PHID!" and then unserialize on
the other side. This is icky but keeps us from needing to require an `arc`
upgrade.
These checks are generally bad news and should move to the server side in the
long run (T4631).
(This probably prevents clean `arc diff`, so I'm just cowboy committing it.)
Auditors: chad
Summary:
Ref T10939. Fixes T10174. We can currently trigger "uninteresting" auditors in two ways:
- Packages with auditing disabled ("NONE" audits).
- Packages with auditing enabled, but they don't need an audit (e.g., author is a pacakge owner; "NOT REQUIRED" audits).
These audits aren't interesting (we only write them so we can list "commits in this package" from other UIs) but right now they take up the audit slot. In particular:
- They show in the UI, but are generally useless/confusing nowadays. The actual table of contents does a better job of just showing "which packages do these paths belong to" now, and shows all packages for each path.
- They block Herald from adding real auditors.
Change this:
- Don't show uninteresting auditors.
- Let Herald upgrade uninteresting auditors into real auditors.
Test Plan:
- Ran `bin/repository reparse --owners <commit> --force`, and `--herald` to trigger Owners and Herald rules.
- With a package with auditing disabled, triggered a "None" audit and saw it no longer appear in the UI with the patch applied.
- With a package with auditing disabled, added a Herald rule to trigger an audit. With the patch, saw it go through and upgrade the audit to "Audit Required".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10174, T10939
Differential Revision: https://secure.phabricator.com/D15940
Summary:
Ref T10939. Fixes T10181. This slightly simplifies, then documents the auditing rules, which haven't been updated for a while. In particular:
- If an owner authored the change, never audit.
- Examine all reviewers to determine reviewer audit status, not just the first reviewer.
- Simplify some of the loading code a bit.
Test Plan:
- Ran `bin/repository reparse --owners <commit> --force` to trigger this stuff.
- Verified that the web UI did reasonable things with resulting audits.
- Read documentation.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10181, T10939
Differential Revision: https://secure.phabricator.com/D15939
Summary: Ref T10939. This adds UI, transactions, etc, to adjust dominion rules.
Test Plan:
- Read documentation.
- Changed dominion rules.
- Created packages on `/` ("A") and `/x` ("B") with "Auto Review: Review".
- Touched `/x`.
- Verified that A and B were added with strong dominion.
- Verified that only B was added when A was set to weak dominion.
- Viewed file in Diffusion, saw correct ownership with strong/weak dominion rules.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10939
Differential Revision: https://secure.phabricator.com/D15936
Summary:
Ref T10939. This supports two settings for packages (although they can't be configured yet):
- **Strong Dominion**: If the package owns `a/`, it always owns every subpath, even if another package also owns the subpath. For example, if I own `src/differential/`, I always own it even if someone else claims `src/differential/js/` as part of the "Javascript" package. This is the current behavior, and the default.
- **Weak Dominion**: If the package owns `a/`, but another package owns `a/b/`, the package gives up control of those paths and no longer owns paths in `a/b/`. This is a new behavior which can make defining some types of packages easier.
In the next change, I'll allow users to switch these modes and document what they mean.
Test Plan:
- Ran existing unit tests.
- Added new unit tests.
Reviewers: chad
Reviewed By: chad
Subscribers: joel
Maniphest Tasks: T10939
Differential Revision: https://secure.phabricator.com/D15935
Summary: Ref T10939. Fixes T4887. Supports "username!" to add a reviewer as blocking.
Test Plan: Added and removed blocking and non-blocking reviewers via CLI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4887, T10939
Differential Revision: https://secure.phabricator.com/D15934
Summary:
Ref T10939. Adds a `blocking(...)` token.
This code is pretty iffy and going to get worse before it gets better, but the fix (T10967 + EditEngine) is going to be a fair chunk of work down the road.
Test Plan: {F1426966}
Reviewers: chad
Reviewed By: chad
Subscribers: scode
Maniphest Tasks: T10939
Differential Revision: https://secure.phabricator.com/D15933
Summary: Fixes T10975. The "scramble attached file permissions when an object is saved" code is misfiring here too. See T10778 + D15803 for prior work.
Test Plan:
- Ran `bin/storage upgrade -f`.
- Edited the view policy of an OAuth server (prepatch: fatal; postpatch: worked great).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10975
Differential Revision: https://secure.phabricator.com/D15938
Summary: Fixes T10972. Nothing actually updates this anymore, and only repositories ever did (e.g., Harbormaster and Drydock have never tracked it). Keeping track of this is more trouble than it's worth.
Test Plan: Grepped for constants, viewed a passphrase credential.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10972
Differential Revision: https://secure.phabricator.com/D15932
Summary:
Ref T10939. I don't think this is hugely important, but it doesn't clutter things up much and it's nice as a hint.
T4055 was the original request specifically asking for this. It wanted a separate bucket, but I think this use case isn't common/strong enough to justify that.
I would like to improve Differential's "X depends on Y" feature in the long term. We don't tend to use/need it much, but it could easily do a better and more automatic job of supporting review of a group of revisions.
Test Plan: {F1426636}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10939
Differential Revision: https://secure.phabricator.com/D15930
Summary: Ref T10939. These poor stragglers got left out in the rain. Didn't catch any issues otherwise.
Test Plan: {F1426604}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10939
Differential Revision: https://secure.phabricator.com/D15929
Summary: Ref T10939. For various historical reasons, revision status is a numeric string. This comparison fails because it's `(string) !== (int)`. Just use `!=` so this will still work if we turn it into a real string in the future.
Test Plan: Tried a more specific test case locally, got better looking results in "Must Review" and "Should Review".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10939
Differential Revision: https://secure.phabricator.com/D15928
Summary:
Ref T10939. I'm not //totally// opposed to the existence of this element, but I think it's the kind of thing that would never make it upstream today. I think this should just be a T418 custom sort of thing in the long run, not a mainline upstream feature.
Overall, I think this thing is nearly useless and just adds visual clutter. My dashboard is about 100% red. This also sort of teaches users that it's fine to let revisions sit for a couple of days, which isn't what I'd like the UI to teach. Finally, removing it helps the UI feel a little less cluttered after the visually busy changes in D15926.
Test Plan: Grepped for removed config. Viewed revision list.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10939
Differential Revision: https://secure.phabricator.com/D15927
Summary:
Ref T10939. Fixes T9263. Ref T4144.
First, this resolves users (converting users into all packages and projects they are responsible for) earlier, so bucketing can act on that data correctly. Previously, your own blocking reviews would appear in "Must Review" but your packages/projects' would not. Now, all of them will.
Second, this adds `exact(username)` to mean "just me, not my packages/projects". You can use this along with "Bucket: By Required Action" to create a personal view of "Active Revisions" if you'd like, and ignore all your project/package reviews.
Test Plan: Queried by "me" and "exact(me)", got reasonable looking results.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4144, T9263, T10939
Differential Revision: https://secure.phabricator.com/D15925
Summary:
Ref T10939. Ref T4144. This splits the existing buckets ("Blocking Others", "Action Required", "Waiting on Others") into 6-7 buckets with a stronger focus on what the next action you need to take is.
See T10939#175423 for some discussion.
Overall, I think some of the root problems here are caused by reviewer laziness and shotgun review workflows (where a ton of people get automatically added to everything, probably unnecessarily), but these buckets haven't been updated since the introduction of blocking reviewers or project/package reviewers and I think splitting the 3 buckets into 6 buckets isn't unreasonable, even though it's kind of a lot of buckets and the root problem here is approximately "I want to ignore a bunch of stuff on my dashboard".
I didn't remove the old bucketing code yet since it's still in use on the default homepage.
This also isn't quite right until I fix the tokenizer to work properly, since it won't bucket project/package reviewers accurately.
Test Plan: {F1395972}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4144, T10939
Differential Revision: https://secure.phabricator.com/D15924
Summary:
Ref T10939. Currently, Differential hard-codes some behaviors for the "active" filter. This introduces "buckets" to make this grouping behavior more general/flexible.
The buckets don't actually do any grouping yet, this just gets rid of the `$query === 'active'` stuff so far.
These buckets change the page size to a large value, becuase pagination won't currently work with bucketing.
The problem is that we normally paginate by selecting one more result than we need: so if we're building a page of size 10, we'll select 11 results. This is fast, and if we get 11 back, we know there's a next page with at least one result on it.
With buckets, we can't do this, since our 11 results might come back in these buckets:
- A, B, C, A, C, C, A, A, B, B, (B)
So we know there are more results, and we know that bucket B has more results, but we have no clue if bucket A and bucket C have more results or not (or if there's anything in bucket D, etc).
We might need to select a thousand more results to get the first (D) or the next (A).
So we could render something like "Some buckets have more results, click here to go to the next page", but users would normally expect to be able to see "This specific bucket, A, has more results.", and we can't do that without a lot more work.
It doesn't really matter for revisions, because almost no one has 1K of them, but this may need to be resolved eventually.
(I have some OK-ish ideas for resolving it but nothing I'm particularly happy with.)
Test Plan: {F1376542}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10939
Differential Revision: https://secure.phabricator.com/D15923
Summary:
Ref T10939. Ref T4144. This moves the revision SearchEngine to modern code so I can add some kind of bucketing layer on top of it.
This seems to have worked pretty cleanly. One thing is that I removed the ability to search for "pending drafts":
- This was added in D1927 from a bootcamp task, was an indirect solution to a questionable problem, and almost certainly would not meet the bar today.
- Later, in D3324, we added the icons to the list. I think this is a better solution in general. In particular, it specifically addressed the query being kind of junky.
- At the time, Differential had a prebuilt "Drafts" filter. This was removed in D6347 with the move to ApplicationSearch, which simplified the large number of prebuilt filters. Although we got a lot of feedback about that, none requested that the drafts filter be restored.
Test Plan: Searched for responsible users, subscribers, orders, projects, repositories.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4144, T10939
Differential Revision: https://secure.phabricator.com/D15921
Summary:
Ref T10939. If you already own a package, don't trigger the subscribe/review rules.
Document how these rules work.
Test Plan:
- Read documentation.
- Removed reviewers, updated a revision, got autoreviewed.
- Joined package.
- Removed reveiwers, updated a revision, no more autoreview.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10939
Differential Revision: https://secure.phabricator.com/D15918
Summary: Ref T10939. Packages are valid reviewers, so let Herald "Add Reviewers" and "Add Blocking Reviewers" actions add them.
Test Plan:
- Wrote a rule to add package reviewers.
- Hit the rule, saw a package reviewer added, viewed transcript.
{F1311731}
{F1311732}
{F1311733}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10939
Differential Revision: https://secure.phabricator.com/D15917
Summary:
Ref T10939. Fixes T8887. This enables and implements the "review" and "blocking review" options for packages.
This is a bit copy-pastey from `DifferentialReviewersHeraldAction`, which doesn't feel awesome. I think the right fix is Glorious Infrasturcture, though -- I filed T10967 to track that.
Test Plan:
- Set package autoreveiw to "Review".
- Updated, got a reveiwer.
- Set autoreview to "blocking".
- Updated, got a blocking reviewer.
{F1311720}
{F1311721}
{F1311722}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8887, T10939
Differential Revision: https://secure.phabricator.com/D15916
Summary:
Ref T10939. Ref T8887. This moves toward letting packages automatically become reviewers or blocking reviewers of owned code.
This change adds an "Auto Review" option to packages. Because adding reviewers/blocking reviewers is a little tricky, it doesn't actually have these options yet -- just a "subscribe" option. I'll do the reviewer work in the next update.
Test Plan:
Created a revision in a package with "Auto Review: Subscribe to Changes". The package got subscribed.
{F1311677}
{F1311678}
{F1311679}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8887, T10939
Differential Revision: https://secure.phabricator.com/D15915
Summary:
Ref T10939. This lets you add packages as reviewers manually.
"Project Reviewers" now lists both projects and packages. I have renamed this to "Coalition Reviewers" but that's probably horrible and confusing. I'm not sure "Group Reviewers" is much better.
Test Plan:
- Added a package as a reviewer manually.
- Joined it, got authority over it.
- Saw the review on my dashboard.
- Accepted the revision, got authority extended to the package review.
{F1311652}
{F1311653}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10939
Differential Revision: https://secure.phabricator.com/D15914
Summary:
Ref T10939. These appear in "Subscribers" tokenizers now and we got a maybe slightly better icon in the last FA update: {icon shopping-bag} instead of {icon list-alt}.
(I don't feel strongly about this, the old icon just doesn't seem very evocative.)
Test Plan:
o.( O___O ).o
{F1311641}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10939
Differential Revision: https://secure.phabricator.com/D15913
Summary:
Ref T10939. Fixes T7834.
- Make packages into mailable objects, like projects and users.
- Packages resolve recipients by resolving project and user owners into recipients.
Test Plan:
- Added a comment to a revision with a package subscriber.
- Used `bin/mail show-outbound` to see that owners got mail.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7834, T10939
Differential Revision: https://secure.phabricator.com/D15912
Summary:
Ref T10939. This allows the CLI to parse reviewers and subscribers like this:
```Reviewers: epriestley, O123 Some Package Name```
The rule goes:
- If a reviewer or subscriber starts with a monogram (like `X111`), just look that up and ignore everything until the next comma.
- Otherwise, split it on spaces and look up each part.
This means that these are valid:
```
alincoln htaft
alincoln, htaft
#a #b epriestley
O123 Some Package, epriestley, #b
```
I think the only real downside is that this:
```
O123 Some Package epriestley
```
...ignores the "epriestley" part. However, I don't expect users to be typing package monograms manually -- they just need to be representable by `arc land` and `arc diff --edit` and such. Those flows will always add commas and make the parse unambiguous.
Test Plan:
- Added test coverage.
- `amend --show`'d a revision with a package subscriber (this isn't currently possible to produce using the web UI, it came from a future change) and saw `Subscribers: O123 package name, usera, userb`.
- Updated a revision with a package subscriber.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10939
Differential Revision: https://secure.phabricator.com/D15911
Summary:
Ref T10939. This isn't ideal because it's easy to confuse with zero ("O" vs "0") but I think this will mostly be read-only so it's probably one of the least-bad uses we could make of "O". We haven't really gotten into trouble with "I" (vs "1") for initiatives. Still, open to better ideas.
The goal here is to allow commit messages to include packages in some reasonable way, like `Reviewers: O123 Package Name, epriestley, alincoln`. The parser will ignore the "Package Name" part, that's just for humans. And I don't expect humans to type this, but when the use `arc diff --edit` or similar to update an //existing// revision, the reviewer needs to be represented somehow. It also needs to appear in the commit messages that `arc land` finalizes somehow.
I didn't hook up `/O123` as a URI, but this should do everything else I think.
Test Plan:
- Viewed package list.
- Viewed package detail.
- Did global search for `O12`.
- Used `O12` and `{O12}` remarkup rules.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10939
Differential Revision: https://secure.phabricator.com/D15910
Summary:
Ref T10939. This has no effect yet since packages can not actually become reviewers, I'm just inching toward support.
- When searching for "responsible users", include revisions that need review by packages you have authority over.
- When calculating review authority, include authority over packages you are a member of (these currently never exist).
Test Plan:
This isn't reachable so I just `var_dump()`'d stuff and looked at the generated queries, which appeared correct/reasonable.
I'll vet this more thoroughly once packages can actually become reviewers.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10939
Differential Revision: https://secure.phabricator.com/D15909
Summary:
Ref T10923. This extension needs to load a little more data (with `needURIs`) to function correctly now.
(There's a recent migration does this, so indexes got updated correctly when it ran, so it hasn't been obvious that they weren't getting updated properly after that.)
Test Plan: Made an arbitrary edit to a repository, observed no more error in daemon logs.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10923
Differential Revision: https://secure.phabricator.com/D15908
Summary:
Ref T10939. This is just a bug. I thought this was what was described in T10174 but that's actually talking about something completely different.
Also make a `<select />` slightly easier to use.
Test Plan:
- Created a package with auditing enabled.
- Pushed a change.
- Saw audit trigger.
- Disabled the package, pushed a change.
- Before patch: saw audit trigger improperly.
- After patch: restarted daemons, then saw audit correctly not trigger.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10939
Differential Revision: https://secure.phabricator.com/D15907
Summary:
Ref T4292. Currently, we hold one big lock around the whole `bin/repository update` workflow.
When running multiple daemons on different hosts, this lock can end up being contentious. In particular, we'll hold it during `git fetch` on every host globally, even though it's only useful to hold it locally per-device (that is, it's fine/good/expected if `repo001` and `repo002` happen to be fetching from a repository they are observing at the same time).
Instead, split it into two locks:
- One lock is scoped to the current device, and held during pull (usually `git fetch`). This just keeps multiple daemons accidentally running on the same host from making a mess when trying to initialize or update a working copy.
- One lock is scoped globally, and held during discovery. This makes sure daemons on different hosts don't step on each other when updating the database.
If we fail to acquire either lock, assume some other process is legitimately doing the work and bail more quietly instead of fataling. In approximately 100% of cases where users have hit this lock contention, that was the case: some other daemon was running somewhere doing the work and the error didn't actually represent an issue.
If there's an actual problem, we still raise a diagnostically useful message if you run `bin/repository update` manually, so there are still tools to figure out that something is hung or whatever.
Test Plan:
- Ran `bin/repository update`, `pull`, `discover`.
- Added `sleep(5)`, forced processes to contend, got lock exceptions and graceful exit with diagnostic message.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15903
Summary: Ref T10959. This does not fix the problem because the `.differential-diff td` rule is still stronger, but it does let you choose a more compact or breezy style for remarkup blocks and pastes.
Test Plan:
- Set font to `24px / 48px impact`.
- Viewed a paste, saw lovely readable text.
- Viewed an inline code block which was very easy on the eyes.
{F1310420}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10959
Differential Revision: https://secure.phabricator.com/D15904
Summary:
Fixes T10940. Two issues currently:
First, `PullLocal` deamon refuses to update non-cluster repositories on cluster devices. However, this is surprising/confusing/bad because as soon as you enroll a repository host in the cluster, most of the repositories on it stop working until you `clusterize` them. This is especially confusing because the documentation gives you a very nice, gradual walkthrough about going through things slowly and being able to check your work at every step, but we really drop you off a bit of a cliff here. The workflow implied by the documentation is a desirable one.
This operation is generally only unsafe/problematic if the daemon would be creating a //new// working copy. If a working copy already exists, we can reasonably guess that it's almost certainly because you've enrolled a previously un-clustered host into a new cluster. This allows the nice, gradual workflow the documentation describes to proceed as expected, without any weird surprises.
Instead of refusing to update these repositories, only refuse to update them if updating would create a new working copy. This should make transitioning much smoother without any meaningful reduction in safety.
Second, the lower-level `bin/repository update`, `refs`, `mirror`, etc., commands don't apply this same check. However, these commands are potentially just as dangerous. Use the same code to do a similar check there, making sure we only operate on repositories that are either expected to be on the current device, or which already exist here.
Test Plan:
- Ran `bin/phd debug pull`, saw diagnostic information choose to update most repositories (including some non-cluster repositories) but properly skip non-cluster repositories that do not exist locally.
- Ran `bin/repository update`, etc., saw the command apply consistent rules to the rules applied by `PullLocal` and refuse to update non-local repositories it would need to create.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10940
Differential Revision: https://secure.phabricator.com/D15902
Summary: Fixes T9790. This uses a simple renderer, like the inline context renderer, that emphasizes getting a quick glance at small changes and working reasonably on mobile devices.
Test Plan:
- Set `inline` setting to `9999`.
- Created a diff.
- Saw it render reasonably in HTML mail.
- Also tested text mail to make sure I didn't break that.
{F1310137, size=full}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9790
Differential Revision: https://secure.phabricator.com/D15901
Summary:
Ref T10923. Currently, users can disable or enable builtin URIs, but this doesn't actually do anything.
The behavior of "disable" has changed a bit over time and might need some further refinement, but it's currently meaningless for builtin URIs. Prevent adjustment of it. If users want to hide a URI, they should set "Display: Hidden" instead.
Test Plan:
- Disabled/enabled a non-builtin URI.
- Tried to disable a builtin URI, saw greyed out UI and got a helpful error message.
Reviewers: chad
Reviewed By: chad
Subscribers: eadler
Maniphest Tasks: T10923
Differential Revision: https://secure.phabricator.com/D15899
Summary: Ref T10923. Fixes T10955. This was accidentally excluded when I broke the form into pages.
Test Plan: Saw edit field in panel; changed project tags for a repository.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10923, T10955
Differential Revision: https://secure.phabricator.com/D15896
Summary: Ref T10751. These workflows have separate `getUser()` and `getViewer()` for weird legacy reasons. `getUser()` is correct.
Test Plan:
- Did a Git SSH push, verified that "Last Writer" reflected the proper user in the "Storage" UI in repository management.
- Grepped for other callsites, double-checked that they used correct users.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10751
Differential Revision: https://secure.phabricator.com/D15893
Summary: Fixes T10952. Fixes T10930. I didn't implement this method correctly when I expanded this field for repositories.
Test Plan: Edited a paste without warnings.
Reviewers: avivey, chad
Reviewed By: chad
Maniphest Tasks: T10930, T10952
Differential Revision: https://secure.phabricator.com/D15892
Summary:
Ref T10923. This makes the "Clone URI" UI a little nicer:
- Show whether each URI is read-only, read-write, or external.
- Clicking the button selects the URI.
- Add a link to manage the appropriate credentials.
Test Plan: {F1308302, size=full}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10923
Differential Revision: https://secure.phabricator.com/D15891
Summary: These parameters wrongly extend List.
Test Plan:
Used createdStart field for a search - didn't get error about "should be a list".
`git grep 'extends ConduitListParameterType'`.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15881
Summary:
Ref T10923. We sort of dead-end new users creating repositories right now, by dumping them into the manage UI without an obvious way forward.
You can click the crumb to get to the repository, but by default it will say something like `R1` which isn't very obvious.
Add a more obvious navigational link to get to the main view.
Test Plan: {F1308196}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10923
Differential Revision: https://secure.phabricator.com/D15889
Summary:
Ref T10923. The old behavior was to show a full command in SVN, Mercurial, and Git, like this:
- `git clone <uri>`
- `hg clone <uri>`
- `svn checkout <uri> <directory>`
In Git and Mercurial, the `<uri>` ends in something like `/nice-repository-name.git` so the default directory it creates is called `nice-repository-name/`.
In Subversion, we don't (and can't easily) do that for various reasons so we provide an explicit `<directory>` with the nice name.
In the update, I've changed things to just show the URI. I often found that I wanted the URI alone, not the whole clone command (for example, to `fetch`, `remote-add`, etc). This is also consistent with GitHub. Because we have nice URIs for Git and Mercurial, `git clone <uri>` has good behavior.
In Subversion, `svn checkout <uri>` has bad beahvior (you get a directory named `47/` or whatever). So continue showing the whole command there.
We can possibly tailor this after T4245 finishes up and we get access to `/source/nice-repository-name/` URIs.
Test Plan:
- Viewed a Subversion repository, saw a full command.
- Viewed a Git repository, saw only a clone URI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10923
Differential Revision: https://secure.phabricator.com/D15888
Summary: Fixes T10948. Ref T10923. Make these rules a little more thorough and document their behavior.
Test Plan: Looked at Diffusion clone URIs.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10923, T10948
Differential Revision: https://secure.phabricator.com/D15887
Summary: Fixes T10941. This avoids a confusing dead end when configuring Subversion hosting, where `svnserve` will fail to execute hooks if the CWD isn't readable by the vcs-user.
Test Plan:
- Updated and committed in a hosted SVN repository.
- Ran some git operations, too.
- @dpotter confirmed this locally in T10941.
Reviewers: chad
Reviewed By: chad
Subscribers: dpotter
Maniphest Tasks: T10941
Differential Revision: https://secure.phabricator.com/D15879
Summary: Ref T10694. This setting no longer has any effect: we always show a limited amount of context now.
Test Plan: `grep`
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10694
Differential Revision: https://secure.phabricator.com/D15886
Summary: Ref T10923. Although I'd ideally like to get rid of this eventually, keep it around for now.
Test Plan:
- Edited value for an SVN repository.
- Observed no panel present for a Git repository.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10923
Differential Revision: https://secure.phabricator.com/D15883
Summary: Fixes T10815. We already recovered reasonably from this for cluster repositories, but not for non-cluster repositories.
Test Plan:
- Viewed cluster and non-cluster empty Git repository.
- Viewed cluster and non-cluster empty Mercurial repository.
- Viewed cluster and non-clsuter empty hosted SVN repository.
- Viewed cluster and non-cluster empty observed SVN repository.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10815
Differential Revision: https://secure.phabricator.com/D15878
Summary:
Ref T10923. Fixes T9554.
When hosting a repository, we currently have a heuristic that tries to detect when you're doing an initial import: if you push more than 7 commits to an empty repository, it counts as an import and we disable mail/feed/etc.
Do something similar for observed repositories: if the repository is empty and we discover more than 7 commits, switch to import mode until we catch up.
This should align behavior with user expectation more often when juggling hosted vs imported repositories.
Test Plan:
- Created a new hosted repository.
- Activated it and allowed it to fully import.
- Added an "Observe URI".
- Saw it automatically drop into "Importing" mode until the import completed.
- Swapped it back to hosted mode.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9554, T10923
Differential Revision: https://secure.phabricator.com/D15877
Summary:
Ref T10923. When regenerating the URI index for a repository, index every URI.
- Also, make the index slightly stricter (domain + path instead of just path). Excluding the domain made more sense when we were generating only first-party URIs.
- Make the index smarter about `/diffusion/123/` URIs.
- Show normalized URIs in `diffusion.repository.search` results.
Test Plan:
- Ran migration.
- Verified sensible-looking results in database.
- Searched for a repository URI by first-party clone URI.
- Searched for a repository URI by mirror URI.
- Used `diffusion.repository.search` to get information about repository URIs.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10923
Differential Revision: https://secure.phabricator.com/D15876
Summary: Ref T10923. Walk users through the "create, configure, activate" workflow a little better and set expectations more clearly.
Test Plan:
- Created a new repository, saw new UI help.
- Activated repository, saw onboarding help disappear.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10923
Differential Revision: https://secure.phabricator.com/D15875
Summary:
Ref T10923.
- Hide "Automation", "Staging" and "Branches" in repositories where they do nothing.
- Fix SVN SSH URIs to read "svn+ssh://" and have proper paths.
Test Plan:
- Verified irrelevant sections did not appear in Subversion in Manage UI.
- Checked out a new hosted SVN repository.
Reviewers: chad, avivey
Reviewed By: avivey
Maniphest Tasks: T10923
Differential Revision: https://secure.phabricator.com/D15874
Summary:
Ref T10923. Fixes T10406. This brings most of the guidance/instructions forward:
- Some remained as instructions.
- Some moved to documentation.
Test Plan: Went through all of the sections and hit the help.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10406, T10923
Differential Revision: https://secure.phabricator.com/D15873
Summary: Ref T10923. This provides a little guidance about hosted vs observed, and points at the `diffusion.ssh-*` options.
Test Plan: Poked around in the web UI, saw useful guidance.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10923
Differential Revision: https://secure.phabricator.com/D15872
Summary: Ref T10923. This cleans up the remaining "pro" mess left by the cutover.
Test Plan: Viewed, managed, edited a repository.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10923
Differential Revision: https://secure.phabricator.com/D15871
Summary:
Ref T10923. Primarily documents the process for creating repositories via the API.
Also fixes a couple of issues with `repositoryPHID` not being set yet when creating URIs via the API.
Test Plan:
- Followed all documented steps to create a new repository.
- Created and edited some new URIs from the web workflow, too.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10923
Differential Revision: https://secure.phabricator.com/D15870
Summary: Ref T10923. This isn't complete yet, but reduces lies and increases truths.
Test Plan: Read documentation, clicked new "Documentation" nav item.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10923
Differential Revision: https://secure.phabricator.com/D15868
Summary:
Ref T10923. Some of the dialogs ("Deactivate Repository", "Test Automation", etc.) had cancel or redirect URIs which I missed originally.
Go through them and make sure they all point to the right places.
Also removed one unused controller which I missed the first time around.
Test Plan:
- Opened all these dialogs in a new tab with Command-Click.
- Clicked every "cancel" and "submit" button on all of these dialogs.
- Got consistently sent to the place I came from.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10923
Differential Revision: https://secure.phabricator.com/D15867
Summary:
Ref T10923.
- The "Policy" edit form currently goes "Push, View, Edit". Reorder the defaults to "View, Edit, Push".
- Editing Spaces doesn't currently work: the element appears in the UI, but isn't actually processed when handling transactions. Make that work.
Test Plan:
- Edited a repository policies, saw "View, Edit, Push".
- Moved a repository between Spaces.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10923
Differential Revision: https://secure.phabricator.com/D15866
Summary:
Ref T10923. Paging wasn't being applied correctly when creating //new// repositories after API changes.
Also, the first redirect after creation wasn't sending users to the right place.
Test Plan:
- Created a new repostiory, got redirected properly.
- Verified that new repostiory flow has the correct fields (name, callsign, etc) and Conduit API has the correct fields (everything).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10923
Differential Revision: https://secure.phabricator.com/D15865
Summary:
Ref T10694. General improvements:
- Remove leading empty lines from context snippets.
- Remove trailing empty lines from context snippets.
- If we removed everything, render a note.
- Try using `style` instead of `<pre>`? My thinking is that maybe Airmail has weird default rules for `<pre>`, since that's the biggest / most obvious thing that's different about this element to me.
Test Plan: Viewed normal comments locally, faked a comment on an empty line in the middle of a lot of other empty lines.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10694
Differential Revision: https://secure.phabricator.com/D15864
Summary:
Ref T10694.
- Shift margins/padding around so inlines with multiple paragraphs get reasonable spacing.
- Add `text-decoration: none` to the "View Inline" link to kill the underline.
Test Plan: {F1265342}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10694
Differential Revision: https://secure.phabricator.com/D15863
Summary: Ref T10694. Move the inline style more toward a mix of standard`<pre>` style and the web UI style for inlines.
Test Plan: See screenshots in comments.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10694
Differential Revision: https://secure.phabricator.com/D15857
Summary:
Ref T10927. Pretty sure the issue is:
- User makes an HTTPS request.
- Load balancer terminates it, but with an `X-Forwarded-Proto` header.
- `secure001` (or whatever; acting as web host) proxies it to `secure002` (or whatever; acting as a repository host). **This** connection is plain HTTP.
- Since this proxied connection is plain HTTP, we check if the repository can serve over "http", but it can't: only "https". So we fail incorrectly, even though the original user request was HTTPS.
In the long run we should probably forward the `X-Forwarded-Proto` header, but that has some weird implications and it's broadly fine to allow either protocol to serve as long as the other one is active: configuration like `security.require-https` is already stronger than these settings.
Test Plan: This is likely only observable in production, but normal cloning still works locally.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10927
Differential Revision: https://secure.phabricator.com/D15856
Summary:
Ref T10694. This mostly prevents us from having a degenerate case if someone leaves a 200-line inline.
- For one-line inlines, show 1 line of context above and below (3 lines total).
- For 3+ line inlines, show just the inline.
- For 7+ line inlines, show only the first part.
Test Plan: Made a bunch of weird long/short/different-sized comments, saw reasonble-appearing context in text and HTML mail output.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10694
Differential Revision: https://secure.phabricator.com/D15853
Summary:
Ref T10694. Ref T9790. When generating inline diff context, highlight it and then mangle the highlighted output into `style="..."` so it works in HTML.
Also try to tighten up some spacing/formatting stuff.
Test Plan:
Got some output in this vein:
{F1259937}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9790, T10694
Differential Revision: https://secure.phabricator.com/D15852
Summary:
Ref T10694. This is still missing some pieces, but seems to get most of the data into the mail in a plausible format:
- When an inline remarks on code, show the patch inline in the mail body.
- When an inline replies to another inline, show that other inline in the mail body.
- Apply remarkup rendering to inline content.
- Apply basic styling to mail body blocks.
Not covered yet:
- Syntax highlighting.
- Diff highlighting.
- Maybe clearer style/layout hints to connect comments to what they reply to? Current approach might get messy with inlines that have blockquotes and code blocks inside them, for example.
- I probably want to cap the amount of diff context we ever show to ~7 lines, even if you drag over 200 lines of code.
- CSS is a generally a bit rough still.
- The `unified-comment-context` option is effectively always on now, and should be removed.
- Text section is getting indented right now but probably shouldn't be.
- Spacing, etc., might be a bit off.
Test Plan:
Rigged Home to render these things, got a plausible-looking render (top is text, bottom is HTML):
{F1259052}
Sent myself some inline comment mail, got a plausible result.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10694
Differential Revision: https://secure.phabricator.com/D15850
Summary:
Ref T9790. This prepares the syntax color rules to be reused in mail.
This goes about halfway toward T5701 by sort-of supporting different styles but not really.
Test Plan:
- Ran `bin/celerity syntax` to regenerate syntax map.
- Viewed some highlighted code, didn't see any differences.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9790
Differential Revision: https://secure.phabricator.com/D15846
Summary: Ref T10748. We're returning a `PhabricatorRepositoryURI` here but the code expects an actual `PhutilURI`.
Test Plan:
This should clear this up in production:
```
Daemon 180278 STDE [Wed, 04 May 2016 23:25:16 +0000] [2016-05-04 23:25:16] EXCEPTION: (PhutilProxyException) Error while executing Task ID 1677075. {>} (RuntimeException) Object of class PhabricatorRepositoryURI could not be converted to string at [<phutil>/src/error/PhutilErrorHandler.php:205]
Daemon 180278 STDE [Wed, 04 May 2016 23:25:16 +0000] arcanist(head=master, ref.master=c58f1b9a2507), libcore(), phabricator(head=master, ref.master=29d1115037b8), phutil(head=master, ref.master=0709cd5cfc26), services(head=master, ref.master=04ae8c8f8e3b)
Daemon 180278 STDE [Wed, 04 May 2016 23:25:16 +0000] #0 <#2> PhutilErrorHandler::handleError(integer, string, string, integer, array) called at [<phabricator>/src/applications/repository/storage/PhabricatorRepository.php:1200]
Daemon 180278 STDE [Wed, 04 May 2016 23:25:16 +0000] #1 <#2> PhabricatorRepository::getPublicCloneURI() called at [<phabricator>/src/applications/repository/storage/PhabricatorRepositoryCommit.php:395]
```
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15844
Summary:
Ref T10748. This needs more extensive testing and is sure to have some rough edges, but seems to basically work so far.
Throwing this up so I can work through it more deliberately and make notes.
Test Plan:
- Ran migration.
- Used `bin/repository list` to list existing repositories.
- Used `bin/repository update <repository>` to update various repositories.
- Updated a migrated, hosted Git repository.
- Updated a migrated, observed Git repository.
- Converted an observed repository into a hosted repository by toggling the I/O mode of the URI.
- Conveted a hosted repository into an observed repository by toggling it back.
- Created and activated a new empty hosted Git repository.
- Created and activated an observed Git repository.
- Updated a mirrored repository.
- Cloned and pushed over HTTP.
- Tried to HTTP push a read-only repository.
- Cloned and pushed over SSH.
- Tried to SSH push a read-only repository.
- Updated several Mercurial repositories.
- Updated several Subversion repositories.
- Created and edited repositories via the API.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15842
Summary:
Ref T10748. This migrates and swaps mirroring to `PhabricatorRepositoryURI`, obsoleting `PhabricatorRepositoryMirror`.
This prevents you from editing, adding or disabling mirrors unless you know a secret URI (until the UI cuts over fully), but existing mirroring is not affected.
Test Plan:
- Added a mirroring URI to an old repository.
- Verified it worked with `bin/repository mirror`.
- Migrated forward.
- Verified it still worked with `bin/repository mirror`.
- Wow, mirroring: https://github.com/epriestley/locktopia-mirror
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15841
Summary:
Ref T10748. In D14250#158181, I accepted this conditional on removing it once Conduit could handle it.
Conduit can now handle it, or at least will be able to as soon as T10748 cuts over.
Test Plan: Grepped for `repository edit`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15839
Summary:
Ref T10748. This has had many problems for a long time, can't create hosted repositories, can't create cluster repositories, etc. It is obsoleted by `diffusion.repository.edit`. Remove it.
(Right now `diffusion.repository.edit` isn't a strict replacement, but it will be as soon as the URI stuff cuts over.)
Test Plan: Grepped for `repository.create`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15838
Summary:
Ref T4039. Long ago these were more freely editable and there were some security concerns around creating a repository, then setting its local path to point somewhere it shouldn't.
Local paths are no longer editable so there's no real reason we need to provide a uniqueness guarantee anymore, but you could still make a mistake with `bin/repository move-paths` by accident, and it's a little cleaner to pull them out into their own column with a key.
(We still don't -- and, largely can't -- guarantee that two paths aren't //equivalent// since one might be symlinked to the other, or symlinked only on some hosts, or whatever, but the primary value here is as a sanity check that you aren't goofing things up and pointing a bunch of repositories at the same working copy by mistake.)
Test Plan:
- Ran migrations.
- Grepped for `local-path`.
- Listed and moved paths with `bin/repository`.
- Created a new repository, verified its local path populated correctly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4039
Differential Revision: https://secure.phabricator.com/D15837
Summary: Seems to work ok, if you give `size=wide` to an image file, we blow it out a bit in DocumentPro mode.
Test Plan:
Test in Phame and Maniphest.
{F1256717}
{F1256718}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15840
Summary:
Ref T10748. These:
- Look nice.
- Hint at panel contents / effects.
- Hint which panels have been customized.
- Allow panels with issues or errors to be highlighted with an alert/attention icon.
Test Plan: {F1256156}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15836
Summary: Ref T10748. This copies existing code in the `CreateController` which will eventually be removed.
Test Plan:
- Created a new repository with the EditPro workflow.
- Saw it come up into the cluster properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15835
Summary:
Fixes T10912. When you drag tasks within a milestone, we currently apply an overbroad, API-focused rule and add the parent board's project. This logic was added fairly recently, as part of T6027, to improve the behavior of API-originated moves.
Later on, this causes the task to toggle in and out of the parent project on every alternate drag.
This logic is also partially duplicated in the `MoveController`.
- Add test coverage for this interaction.
- Fix the logic so it accounts for subproject / milestone columns correctly.
- Put all of the logic into the TransactionEditor, so the API gets the exact same rules.
Test Plan:
- Added a failing test and made it pass.
- Dragged tasks around within a milestone column:
- Before patch: they got bogus project swaps on every other move.
- After patch: projects didn't change (correct).
- Dragged tasks around between normal and milestone columns.
- Before patch: worked properly.
- After patch: still works properly.
Here's what the bad changes look like, the task is swapping projects with every other move:
{F1255957}
The "every other" is because the logic was trying to do this:
- Add both the parent and milestone project.
- Whichever one exists already gets dropped from the change list because it would have no effect.
- The other one then applies.
- In applying, it forces removal of the first one.
- Then this process repeats in the other direction the next time through.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10912
Differential Revision: https://secure.phabricator.com/D15834
Summary:
Ref T10748. This allows an EditEngine form to be broken up into pages.
This is less powerful than `PHUIPagedFormView`, because the pages are not sequential / stateful. Each form saves immediately once it's submitted, and can not take you to a new form or back/forward in a series of forms.
For example, you can't create a workflow where the user fills out 5 pages of information before we create an object, like the current repository workflow does.
However, the only place we've ever wanted to do this is repositories and it's fairly bad there, so I feel reasonably confident we aren't going to miss this in the future.
(We do "choose a type of service/repository/rule -> fill out one page of info" fairly often, but can do this without the full-power paging stuff.)
Test Plan:
- Created a repository usin the new Manage UI, filling out only a handful of fields.
- Edited a repository using the new Manage UI.
- All forms are now EditEngine forms offering paged views of the big huge underlying form:
{F1254371}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15832
Summary:
Ref T10748. Ref T10366. Allows users to set credential for new URIs.
- Ref T7221. Our handling of the "git://" protocol is currently incorrect. This protocol is not authenticated, but is considered an SSH protocol. In the new UI, it is considered an anonymous/unauthenticated protocol instead.
- Ref T10241. This fixes the `PassphraseCredentialControl` so it doesn't silently edit the value if the current value is not visible to you and/or not valid.
Test Plan:
Performed a whole lot of credential edits, removals, and adjustments. I'll give this additional vetting before cutting over to it.
{F1253207}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7221, T10241, T10366, T10748
Differential Revision: https://secure.phabricator.com/D15829
Summary: Fixes T10906, Fixes T10820. Adds new icons, grey-er colors for previous states. Also, I think fixed a few bugs?
Test Plan: Fake each state, verify icon is as intended.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10820, T10906
Differential Revision: https://secure.phabricator.com/D15830
Summary:
Ref T10748.
- Allow users to add new URIs by clicking a button instead of knowing a secret URI.
- Validate that URIs are actually valid URIs.
- Add enable/disable action and strings.
Test Plan:
- Created a new URI.
- Tried to create a nonsense URI, created a good URI.
- Enabled/disabled a URI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15825
Summary: Ref T10748. Adds a "uris" attachment with URI information.
Test Plan: Queried URI information via Conduit, saw reasonable looking information.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15822
Summary: Ref T10748. Brings the rest of the transactions to EditEngine, supports creating via API.
Test Plan:
- Created a URI via API.
- Created a URI via web.
- Tried to apply sneaky transactions, got rejected with good error messages. <_< >_>
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15821
Summary: Ref T10748. Ref T10366. This documents how everything is planned to work shortly.
Test Plan: Read documentation.
Reviewers: chad
Reviewed By: chad
Subscribers: eadler, scode
Maniphest Tasks: T10366, T10748
Differential Revision: https://secure.phabricator.com/D15817
Summary:
Ref T10748.
- New View page for repository URIs.
- Make display and I/O behavior (observe, mirror, read, read/write) editable.
- Add a bunch of checks to prevent you from completely screwing up a repository by making it writable from a bunch of differnet sources.
Test Plan:
{F1249866}
{F1249867}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15816
Summary:
Ref T10748. Ref T10366. This adds a new EditEngine, EditController, Editor, Query, and Transaction for RepositoryURIs.
None of these really do anything helpful yet, and these URIs are still unused in the actual application.
Test Plan: {F1249794}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10366, T10748
Differential Revision: https://secure.phabricator.com/D15815
Summary:
Ref T10748. Allow the new EditEngine workflow to create repositories by giving the user a modal repository type choice upfront.
(The rest of this flow is still confusing/weird, though.)
Test Plan:
- Created a new repository.
{F1249626}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15813
Summary: Ref T10748. This brings the "Actions" items (publish/notify + autoclose enabled) into the new UI.
Test Plan:
- Edited this stuff via EditEngine and Conduit.
- Viewed via new Manage UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15811
Summary: Ref T10748. Makes a "Branches" panel, enables these transactions in the EditEngine.
Test Plan:
- Edited via EditEngine + Conduit.
- Viewed via manage UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15809
Summary: Ref T10748. Port this, add EditEngine support, add some type validation to the transaction.
Test Plan:
- Edited via EditEngine.
- Edited via Conduit.
- Viewed via Management UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15808
Summary:
Ref T10843. There are actually two separate notions of cacheability here:
- Is this cacheable by the browser (e.g., should we emit "Expires: long in the future")?
- Is this cacheable locally (e.g., should we stick it in APC, or just read it off disk every time)?
These got a little mixed up by D15775, so we aren't currently emitting proper "Expires" headers on font files and a few other resource types.
Straighten this out so that we "Expires" these unusual resources correctly.
Test Plan: Verified that `.woff` files get a proper "Expires" header now, not just CSS/JS.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10843
Differential Revision: https://secure.phabricator.com/D15807
Summary: Ref T10748. Brings this forward in the UI and EditEngine.
Test Plan:
- Edited via Conduit.
- Viewed via Manage UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15805
Summary: Ref T10748. Ports this UI and exposes it on the EditEngine.
Test Plan:
- Edited via EditEngine.
- Viewed new manage UI.
Reviewers: chad
Reviewed By: chad
Subscribers: hach-que
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15804
Summary:
Fixes T10778. This is a result of T10262: when we save a form configuration and adjust the policy, we try to scramble attached file secrets.
There aren't going to be any attached files, but there's also no edge table, so we fail.
We could skip this code, but we'll likely need an edge table here sooner or later so it's probably simpler in the long run to just add an empty one.
Test Plan:
- Ran `bin/storage upgrade`, got a clean bill of health.
- Saved a form configuration after making a policy edit, no more `edge` exception.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10778
Differential Revision: https://secure.phabricator.com/D15803
Summary: Ref T4292. This provides at least some sort of hint about how to set up cluster repositories.
Test Plan:
- Read documentation.
- Ran `bin/repository clusterize` to add + remove clusters.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15798
Summary:
Fixes T10876. Currently, we can end up with a setup warning banner sticking on each web device, since the state is stored in local cache.
Instead:
- When we actually run the setup checks, save the current state in the database.
- Before we show a cached banner, make sure the database still says the checks are a problem.
This could lead to some inconsistencies if setup checks legitimately pass on some hosts but not on others. For example, if you have `git` installed on one machine but not on another, we may raise a setup warning ("No Git Binary!") about it on one host only.
For now, assume users have their operational environments in some sort of reasonable shape and can install the same stuff everywhere. In the future, we could split the issues into "global" and "per-host" issues if we run into problems with this.
Test Plan:
This is somewhat tricky to test locally since you really need multiple webservers to test it properly, but I:
- Created some setup issues, saw banner.
- Ignored/cleared them, saw banner go away.
- Verified database cache writes were occurring properly.
Then I sort of faked it like this:
- Created a setup issue.
- Manually set the database cache value to `[]` ("no issues").
- Reloaded page.
- No more banner.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10876
Differential Revision: https://secure.phabricator.com/D15802
Summary: Ref T10748. Brings this over and adds EditEngine support for it.
Test Plan: Viewed and edited staging area information.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15801
Summary: Ref T10748. This merges "Storage" and "Cluster" into a single UI which combines the information of both.
Test Plan: {F1246882}
Reviewers: chad
Reviewed By: chad
Subscribers: hach-que
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15800
Summary:
Ref T4292. This is a required step in configuring a cluster: document and explain it.
Previously `bin/almanac register` could //also// add and trust keys. I've removed this capability since I think it's needless and complicated. If there's some real use for it eventually, we could add a `bin/almanac add-key` or whatever. The workflow is simpler and has better guard rails that point you in the correct direction now.
Test Plan:
- Read documentation.
- Ran `bin/almanac` with various good/bad flags.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15795
Summary: This gets over-escaped instead of bolded right now, but I only ever hit it when exporting/importing and never both cleaning it up.
Test Plan: Ran `bin/repository move-paths`, saw bolded "Move" instead of ANSI escape sequences.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15797
Summary:
Ref T10860. This allows us to recover if the connection to the database is lost during a push.
If we lose the connection to the master database during a push, we would previously freeze the repository. This is very safe, but not very operator-friendly since you have to go manually unfreeze it.
We don't need to be quite this aggressive about freezing things. The repository state is still consistent after we've "upgraded" the lock by setting `isWriting = 1`, so we're actually fine even if we lost the global lock.
Instead of just freezing the repository immediately, sit there in a loop waiting for the master to come back up for a few minutes. If it recovers, we can release the lock and everything will be OK again.
Basically, the changes are:
- If we can't release the lock at first, sit in a loop trying really hard to release it for a while.
- Add a unique lock identifier so we can be certain we're only releasing //our// lock no matter what else is going on.
- Do the version reads on the same connection holding the lock, so we can be sure we haven't lost the lock before we do that read.
Test Plan:
- Added a `sleep(10)` after accepting the write but before releasing the lock so I could run `mysqld stop` and force this issue to occur.
- Pushed like this:
```
$ echo D >> record && git commit -am D && git push
[master 707ecc3] D
1 file changed, 1 insertion(+)
# Push received by "local001.phacility.net", forwarding to cluster host.
# Waiting up to 120 second(s) for a cluster write lock...
# Acquired write lock immediately.
# Waiting up to 120 second(s) for a cluster read lock on "local001.phacility.net"...
# Acquired read lock immediately.
# Device "local001.phacility.net" is already a cluster leader and does not need to be synchronized.
# Ready to receive on cluster host "local001.phacility.net".
Counting objects: 3, done.
Delta compression using up to 8 threads.
Compressing objects: 100% (2/2), done.
Writing objects: 100% (3/3), 254 bytes | 0 bytes/s, done.
Total 3 (delta 1), reused 0 (delta 0)
BEGIN SLEEP
```
- Here, I stopped `mysqld` from the CLI in another terminal window.
```
END SLEEP
# CRITICAL. Failed to release cluster write lock!
# The connection to the master database was lost while receiving the write.
# This process will spend 300 more second(s) attempting to recover, then give up.
```
- Here, I started `mysqld` again.
```
# RECOVERED. Link to master database was restored.
# Released cluster write lock.
To ssh://local@localvault.phacility.com/diffusion/26/locktopia.git
2cbf87c..707ecc3 master -> master
```
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10860
Differential Revision: https://secure.phabricator.com/D15792
Summary:
Ref T10860. At least in Git over SSH, we can freely echo a bunch of stuff to stderr and Git will print it to the console, so we can tell users what's going on.
This should make debugging, etc., easier. We could tone this down a little bit once things are more stable if it's a little too chatty.
Test Plan:
```
$ echo D >> record && git commit -am D && git push
[master ca5efff] D
1 file changed, 1 insertion(+)
# Push received by "local001.phacility.net", forwarding to cluster host.
# Waiting up to 120 second(s) for a cluster write lock...
# Acquired write lock immediately.
# Waiting up to 120 second(s) for a cluster read lock on "local001.phacility.net"...
# Acquired read lock immediately.
# Device "local001.phacility.net" is already a cluster leader and does not need to be synchronized.
# Ready to receive on cluster host "local001.phacility.net".
Counting objects: 3, done.
Delta compression using up to 8 threads.
Compressing objects: 100% (2/2), done.
Writing objects: 100% (3/3), 256 bytes | 0 bytes/s, done.
Total 3 (delta 1), reused 0 (delta 0)
To ssh://local@localvault.phacility.com/diffusion/26/locktopia.git
8616189..ca5efff master -> master
```
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10860
Differential Revision: https://secure.phabricator.com/D15791
Summary: Ref T10860. This doesn't change anything, it just separates all this stuff out of `PhabricatorRepository` since I'm planning to add a bit more state to it and it's already pretty big and fairly separable.
Test Plan: Pulled, pushed, browsed Diffusion.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10860
Differential Revision: https://secure.phabricator.com/D15790
Summary:
Fixes T10865.
- Mock descriptions did not markup.
- Image descriptions did not get a proper container `<div />`.
Test Plan:
- Created a mock with remarkup in the mock description and in an image description.
- Viewed mock detail.
- Saw list styles render properly in both mock description and image description.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10865
Differential Revision: https://secure.phabricator.com/D15793
Summary: Fixes T10863. See that task for discussion.
Test Plan:
- Configured `aphlict` with no "logs".
- Started `aphlict`.
- Before change: exception.
- After change: worked.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10863
Differential Revision: https://secure.phabricator.com/D15788
Summary:
Ref T4292. Sometimes, we may not have a working copy for a repository. The easiest way to get into this condition is to deactivate a repository.
We could try to clone + fetch in this case, but that's kind of complex, and there's an easy command that administrators can run manually. For now, just tell them to do that.
This affects the inactive repositories on `secure`, like rGITCOINS.
Test Plan: Removed working copy, got message.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15786
Summary:
Ref T7789. Currently, we use different viewers if you have `security.alternate-file-domain` configured vs if you do not.
This is largely residual from the days of one-time-tokens, and can cause messy configuration-dependent bugs like the one in T7789#172057.
Instead, always use the omnipotent viewer. Knowledge of the secret key alone is sufficient to access a file.
Test Plan:
- Disabled `security.alternate-file-domain`.
- Reproduced an issue similar to the one described on T7789.
- Applied change.
- Clean LFS interaction.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7789
Differential Revision: https://secure.phabricator.com/D15784
Summary:
Ref T4292. When the daemons make a query for repository information, we need to make sure the working copy on disk is up to date before we serve the response, since we might not have the inforamtion we need to respond otherwise.
We do this automatically for almost all Diffusion methods, but this particular method is a little unusual and does not get this check for free. Add this check.
Test Plan:
- Made this code throw.
- Ran `bin/repository reparse --message ...`, saw the code get hit.
- Ran `bin/repository lookup-user ...`, saw this code get hit.
- Made this code not throw.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15783
Summary: I've possibly seen a couple of `aphlict` processes exit under suspicious circumstances (maybe?). Make sure any PHP errors get captured into the log.
Test Plan:
- Added an exception after forking.
- Before change: vanished into thin air.
- After change: visible in the log.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15782
Summary:
Fixes T10843. In a multi-server setup, we can do this:
- Two servers, A and B.
- You push an update.
- A gets pushed first.
- After A has been pushed, but before B has been pushed, a user loads a page from A.
- It generates resource URIs like `/stuff/new/package.css`.
- Those requests hit B.
- B doesn't have the new resources yet.
- It responds with old resources.
- Your CDN caches things. You now have a poisoned CDN: old data is saved in a new URL.
To try to avoid this with as little work as possible and generally make it hard to get wrong, check the URL hash against the hash we would generate.
If they don't match, serve our best guess at the resource, but don't cache it. This should make things mostly keep working during the push, but prevent caches from becoming poisoned, and everyone should get a working version of everything after the push finishes.
Test Plan:
- `curl`'d a resource, got a cacheable one.
- Changed the hash a little, `curl`'d again. This time: valid resource, but not cacheable.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10843
Differential Revision: https://secure.phabricator.com/D15775
Summary: Ref T4292. This adds a new high-level overview panel.
Test Plan: {F1238854}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15772
Summary: Fixes T8897
Test Plan: Open any list view of Calendar events, every event should only show "Attending: ..." with users who are attending event.
Reviewers: chad, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T8897
Differential Revision: https://secure.phabricator.com/D15779
Summary: This still wasn't quite right -- a link like `[[ Porcupine Facts ]]` with a space would not lookup correctly, and would render as `porcupine_facts`.
Test Plan: Verified that `[[ Porcupine Facts ]]` now works correctly.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15780
Summary: Fixes T10845.
Test Plan: Verified that `[[ quack ]]` and `[[ QUACK ]]` both work. Previously, the link had to exactly match the capitalization of the target.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10845
Differential Revision: https://secure.phabricator.com/D15777
Summary: Fixes T10844. After recent changes to Aphlict (T6915 and T10697), `./bin/status` needs to be aware of the configuration file. As such, it is now necessary to run `./bin/aphlict status --config /path/to/config.json` rather than `./bin/aphlict status`.
Test Plan: Ran `./bin/aphlict start ...` and `./bin/aphlict status` and saw "Aphlict (`$PID`) is running".
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T10844
Differential Revision: https://secure.phabricator.com/D15776
Summary:
Fixes T8952. When Herald changes subscribers, it is zzzzz very boring.
When users change subscribers, it is still super boring (more boring than a merge, for example).
Test Plan: Viewed feed, saw fewer Herald stories.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8952
Differential Revision: https://secure.phabricator.com/D15774
Summary:
Ref T8952. Currently, when an application (most commonly Herald, but sometimes Drydock, Diffusion, etc) publishes a feed story, we get an empty grey box for it in feed.
Instead, give the story a little application icon kind of "profile picture"-like thing.
Test Plan:
Here's how it looks:
{F1239003}
Feel free to tweak/counter-diff.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8952
Differential Revision: https://secure.phabricator.com/D15773
Summary:
Ref T10751. Add support tooling for manually prying your way out of trouble if disaster strikes.
Refine documentation, try to refer to devices as "devices" more consistently instead of sometimes calling them "nodes".
Test Plan: Promoted and demoted repository devices with `bin/repository thaw`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10751
Differential Revision: https://secure.phabricator.com/D15768
Summary:
Ref T10751. Make the UI more useful and explain what failure states mean and how to get out of them.
The `bin/repository thaw` command does not exist yet, I'll write that soon.
Test Plan: {F1238241}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10751
Differential Revision: https://secure.phabricator.com/D15766
Summary: Fixes T10744
Test Plan: Create recurring event, cancel one instance, cancel the parent event, reinstate event. Wording in the reinstating dialog should be clear about reinstating only instances that haven't been individually cancelled.
Reviewers: chad, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T10744
Differential Revision: https://secure.phabricator.com/D15770
Summary: This is completely obsoleted by `owners.search`. See D15472.
Test Plan: Viewed API method in UI console.
Reviewers: avivey, chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15769
Summary:
Fixes T10840. When rendering mail, this rule wasn't falling through in quite the right way.
Also adjust where the rules are for this so the special styles show up in Maniphest, etc.
Test Plan:
Made this comment:
{F1238266}
Which produced this HTML:
{F1238267}
...and sent this mail:
{F1238283}
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T10840
Differential Revision: https://secure.phabricator.com/D15767
Summary: Ref T10751. This cleans this up so it's a little more modern, and fixes a possible bad access on the log detail page.
Test Plan: Viewed push log list, viewed push log detail.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10751
Differential Revision: https://secure.phabricator.com/D15765
Summary: This will stop breaking if you have subscribers and tags when updating a revision (`Error parsing field "Subscribers": The objects you have listed include objects which do not exist (Tags:)`), which I broke in D15749.
Test Plan: run through arc-diff --update that failed earlier.
Reviewers: chad, #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15762
Summary:
Ref T4292. Right now, repository versions only get marked when a write happens.
This potentially creates a problem: if I pushed all the sync code to `secure` and enabled `secure002` as a repository host, the daemons would create empty copies of all the repositories on that host.
Usually, this would be fine. Most repositories have already received a write on `secure001`, so that working copy has a verison and is a leader.
However, when a write happened to a rarely-used repository (say, rKEYSTORE) that hadn't received any write recently, it might be sent to `secure002` randomly. Now, we'd try to figure out if `secure002` has the most up-to-date copy of the repository or not.
We wouldn't be able to, since we don't have any information about which node has the data on it, since we never got a write before. The old code could guess wrong and decide that `secure002` is a leader, then accept the write. Since this would bump the version on `secure002`, that would //make// it an authoritative leader, and `secure001` would synchronize from it passively (or on the next read or write), which would potentially destroy data.
Instead:
- Refuse to continue in situations like this.
- When a repository is on exactly one device, mark it as a leader with version "0".
- When a repository is created into a cluster service, mark its version as "0" on all devices (they're all leaders, since the repository is empty).
This should mean that we won't lose data no matter how much weird stuff we run into.
Test Plan:
- In single-node mode, used `repository update` to verify that `0` was written properly.
- With multiple nodes, used `repository update` to verify that we refuse to continue.
- Created a new repository, verified versions were initialized correctly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15761
Summary: Ref T4292. When we write a push log, also log which node received the request.
Test Plan: {F1230467}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15759
Summary:
Ref T4292. We currently synchronize hosted, clustered, Git repositories when we receive an SSH pull or push.
Additionally:
- Synchronize before HTTP reads and writes.
- Synchronize reads before Conduit requests.
We could relax Conduit eventually and allow Diffusion to say "it's OK to give me stale data".
We could also redirect some set of these actions to just go to the up-to-date host instead of connecting to a random host and synchronizing it. However, this potentially won't work as well at scale: if you have a larger number of servers, it sends all of the traffic to the leader immediately following a write. That can cause "thundering herd" issues, and isn't efficient if replicas are in different geographical regions and the write just went to the east coast but most clients are on the west coast. In large-scale cases, it's better to go to the local replica, wait for an update, then serve traffic from it -- particularly given that writes are relatively rare. But we can finesse this later once things are solid.
Test Plan:
- Pushed and pulled a Git repository over HTTP.
- Browsed a Git repository from the web UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15758
Summary:
Ref T4292. Before we write or read a hosted, clustered Git repository over SSH, check if another version of the repository exists on another node that is more up-to-date.
If such a version does exist, fetch that version first. This allows reads and writes of any node to always act on the most up-to-date code.
Test Plan: Faked my way through this and got a fetch via `bin/repository update`; this is difficult to test locally and needs more work before we can put it in production.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15757
Summary:
Ref T4292. When you run `git fetch` and connect to, say, `repo001.west.company.com`, we'll look at the current version of the repository in other nodes in the cluster.
If `repo002.east.company.com` has a newer version of the repository, we'll fetch that version first, then respond to your request.
To do this, we need to run `git fetch repo002.east.company.com ...` and have that connect to the other host and be able to fetch data.
This change allows us to run `PHABRICATOR_AS_DEVICE=1 git fetch ...` to use device credentials to do this fetch. (Device credentials are already supported and used, they just always connect as a user right now, but these fetches should be doable without having a user. We will have a valid user when you run `git fetch` yourself, but we won't have one if the daemons notice that a repository is out of date and want to update it, so the update code should not depend on having a user.)
Test Plan:
```
$ PHABRICATOR_AS_DEVICE=1 ./bin/ssh-connect local.phacility.com
Warning: Permanently added 'local.phacility.com' (RSA) to the list of known hosts.
PTY allocation request failed on channel 0
phabricator-ssh-exec: Welcome to Phabricator.
You are logged in as device/daemon.phacility.net.
You haven't specified a command to run. This means you're requesting an interactive shell, but Phabricator does not provide an interactive shell over SSH.
Usually, you should run a command like `git clone` or `hg push` rather than connecting directly with SSH.
Supported commands are: conduit, git-lfs-authenticate, git-receive-pack, git-upload-pack, hg, svnserve.
Connection to local.phacility.com closed.
```
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15755
Summary:
Ref T4292. This consolidates code for figuring out which user we should connect to hosts with.
Also narrows a lock window.
Test Plan: Browsed Diffusion, pulled and pushed through an SSH proxy.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15754
Summary:
In calendar, dashboard, diffusion, diviner, feed, fund,
maniphest, pholio, ponder, and slowvote use the term 'tags' if possible.
This intenctionally skips diffusion, differential, and the projects application itself.
Ref T10326 Ref T10349
Test Plan: inspection on a running, locally modified, system
Reviewers: avivey, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T10835, T10326, T10349
Differential Revision: https://secure.phabricator.com/D15753
Summary:
Ref T10832. In practice, `git --version` is not a useful test for this issue:
- Vendors like Debian have backported the patch into custom versions like `0.0.0.1-debian-lots-of-patches.3232`.
- Vendors like Ubuntu distribute multiple different versions which report the same string from `git --version`, some of which are patched and some of which are not.
In other cases, we can perform an empirical test for the vulnerability. Here, we can not, because we can't write a 2GB path in a reasonable amount of time.
Since vendors (other than Apple) //generally// seem to be on top of this and any warning we try to raise based on `git --version` will frequently be incorrect, don't raise this warning.
I'll note this in the changelog instead.
Test Plan: Looked at setup issues, no more warning for vulnerable git version.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10832
Differential Revision: https://secure.phabricator.com/D15756
Summary:
Ref T4292. Ref T10366. Depends on D15751. Today, generating repository commands is purely a function of the repository, so they use protocols and credentials based on the repository configuration.
For example, a repository with an SSH "remote URI" always generate SSH "remote commands".
This needs to change in the future:
- After T10366, repositories won't necessarily just have one type of remote URI. They can only have one at a time still, but the repository itself won't change based on which one is currently active.
- For T4292, I need to generate intracluster commands, regardless of repository configuration. These will have different protocols and credentials.
Prepare for these cases by separating out command construction, so they'll be able to generate commands in a more flexible way.
Test Plan:
- Added unit tests.
- Browsed diffusion.
- Ran `bin/phd debug pull` to pull a bunch of repos.
- Ran daemons.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292, T10366
Differential Revision: https://secure.phabricator.com/D15752
Summary: Users can't find the "Tags" field in the Edit Menu; Added keyword "Tag".
Test Plan: Looked in Edit page; I think this shouldn't change anything else?
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15749
Summary: Ref T4292. This will let the UI and future `bin/repository` tools give administrators more tools to understand problems when reporting or resolving them.
Test Plan:
- Pushed fully clean repository.
- Pushed previously-pushed repository.
- Forced write to abort, inspected useful information in the database.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15748
Summary:
Ref T4292. Small fixes:
- There was a bug with the //first// write, where we'd write 1 but expect 0. Fix this.
- Narrow the window where we hold the `isWriting` lock: we don't need to wait for the client to finish.
- Release the lock even if something throws.
- Use a more useful variable name.
Test Plan:
- Made new writes to a fresh cluster repository.
- Made sequential writes.
- Made concurrent writes.
- Made good writes and bad writes.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15747
Summary:
Fixes T10830.
- The return code from `storage adjust` did not propagate correct.
- There was one column issue which I missed the first time around because I had a bunch of unrelated stuff locally.
Test Plan:
- Ran `bin/storage upgrade -f` with failures, used `echo $?` to make sure it exited nonzero.
- Got fully clean `bin/storage adjust` by dropping all my extra local tables.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10830
Differential Revision: https://secure.phabricator.com/D15746
Summary: Ref T10832. Raise a setup warning for out-of-date versions of `git`.
Test Plan: {F1224632}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10832
Differential Revision: https://secure.phabricator.com/D15745
Summary:
Fixes T10830. Ref T10366. I wasn't writing to this table yet so I didn't build it, but the fact that `bin/storage adjust` would complain slipped my mind.
- Add the table.
- Make the tests run `adjust`. This is a little slow (a few extra seconds) but we could eventually move some steps like this to run server-side only.
Test Plan: Ran `bin/storage upgrade -f`, got a clean `adjust`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10366, T10830
Differential Revision: https://secure.phabricator.com/D15744
Summary:
Ref T10748. This supports more transaction types in the modern editor and improves validation so Conduit benefits.
You can technically create repositories via `diffusion.repository.edit` now, although they aren't very useful.
Test Plan:
- Used `diffusion.repository.edit` to create and edit repositories.
- Used `/editpro/` to edit repositories.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15740
Summary: Ref T10748. Ref T10366. No support for editing and no impact on the UI, but get some of the basics in place.
Test Plan: {F1223279}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10366, T10748
Differential Revision: https://secure.phabricator.com/D15742
Summary: Ref T10748. Pretty straightforward. I'd like to put a little "!" icon in the menu if there's a warning/error eventually, but can deal with that latre.
Test Plan: {F1223096}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15741
Summary:
Ref T10748. This is roughly where I'm headed, if it makes some kind of sense? The "Edit" links in sub-sections don't work yet since I haven't built the thing.
Probably depends on D15736.
Test Plan: Manually navigated to `/manage/`, clicked around.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15737
Summary: Ref T10748. Ref T10337. This technically implements this stuff, but it does not do anything useful yet. This skips all the hard stuff.
Test Plan:
- Technically used `diffusion.repository.search` to get repository information.
- Technically used `diffusion.repository.edit` to change a repository name.
- Used `editpro/` to edit a repository name.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10337, T10748
Differential Revision: https://secure.phabricator.com/D15736
Summary: This error message is pointless and dead-ends logged-in users needlessly if they're sent to the register page by documentation or Advanced Enterprise Sales Funnels.
Test Plan: Visited `/auth/register/` while logged in, was sent home.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15739
Summary: Also make `../` work to start relative a link so I don't have to document it as `./../path`.
Test Plan:
- Used `./`, `../`. `./../`, and normal links (proper title pickup).
- Used bad links (red).
- Regenerated documentation:
{F1221692}
Reviewers: hach-que
Reviewed By: hach-que
Differential Revision: https://secure.phabricator.com/D15734
Summary: Ref T7691 (errata). This shows links to Phriction documents in red if they're missing, and links to Phriction documents in grey with a lock icon if the user doesn't have the correct permissions to see the document.
Test Plan:
Tested a bunch of different configurations:
```
[[ ./../ ]] Back to Main Document
[[ ./../subdocument_2]] Mmmm more documents
[[ ./../invisible_document]] Mmmm more documents
[[ ./../ | Explicit Title ]] Back to Main Document
[[ ./../subdocument_2 | Explicit Title ]] Mmmm more documents
[[ ./../invisible_document | Explicit Title ]] Mmmm more documents
[[ ]] Absolute link
[[ subdocument_2 ]] Absolute link
[[ invisible_document ]] Absolute link
[[ | Explicit Title ]] Absolute link
[[ subdocument_2 | Explicit Title ]] Absolute link
[[ invisible_document | Explicit Title ]] Absolute link
```
Got the expected result:
{F1221106}
Reviewers: epriestley, chad, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T7691
Differential Revision: https://secure.phabricator.com/D15733
Summary:
Resolves T7691. This turned out more complex than I really wanted, mainly because I needed to feed the slug information through to both the document renderer and the preview window that appears in the edit controller.
After this change, you can now create relative links in Phriction by doing `[[ ./../some/relative/path ]]`. Relative paths aren't handled anywhere else (they'll still render, but the dots are turned into a literal 'dot' as per existing behaviour).
Test Plan: Created some Phriction documents with relative links, saw them all link correctly.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Maniphest Tasks: T7691
Differential Revision: https://secure.phabricator.com/D15732
Summary:
This nearly works but I didn't have time to get back to it and it isn't stable enough to turn on in the cluster yet.
We have enough other stuff going out this week, so just disable it before `stable` gets cut. Should be ready by next week if things go well.
Test Plan: Fetched a Git SSH repo locally.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15731
Summary: Ref T10697. I missed this so it isn't reading the new config properly.
Test Plan: Ran `bin/aphlict stop`, saw it read config.
Reviewers: chad, Mnkras
Reviewed By: Mnkras
Subscribers: Mnkras
Maniphest Tasks: T10697
Differential Revision: https://secure.phabricator.com/D15729
Summary: Fixes T9348. If you have edit permission, you can kick people out of a room.
Test Plan:
- Kicked people out of a room.
- As an unprivileged user, wasn't able to kick people out of a room.
- Hit most (all?) of the various weird dialog sub-cases.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9348
Differential Revision: https://secure.phabricator.com/D15728
Summary: Fixes T6806. We haven't seen users having issues with `phd.user` in a very long time.
Test Plan:
- Configured daemons to run as `notepriestley`, got a well-explained exception.
- Configured daemons to run as `epriestley`, got a clean start.
- Configured daemons with `phd.user=null`, got a clean start.
Reviewers: chad, areitz
Reviewed By: areitz
Subscribers: areitz
Maniphest Tasks: T6806
Differential Revision: https://secure.phabricator.com/D15726
Summary:
Ref T10756. This:
- Fixes T7307. This UI is now admin-only.
- Makes the main "running daemons" table more useful for multi-host setups (show where daemons are running).
- Removes logs from the web UI: these are sometimes vaguely sensitive and shouldn't be visible. The UI tells you how to get them with `bin/phd log`.
- Minor modernization.
Test Plan:
- As a non-admin, viewed daemons (access error) and bulk jobs (worked great).
- Browsed bulk job pages.
- Ran a bulk job.
- Viewed daemon console.
- Viewed task detail / daemon detail / daemon list pages.
{F1220516}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7307, T10756
Differential Revision: https://secure.phabricator.com/D15724
Summary: Fixes T10706
Test Plan: Open UI Example of badges. Shouldn't be broken
Reviewers: epriestley, #blessed_reviewers, chad
Reviewed By: #blessed_reviewers, chad
Subscribers: Korvin
Maniphest Tasks: T10706
Differential Revision: https://secure.phabricator.com/D15723
Summary:
Fixes T9385. This was accidentally mangled a bit a long time ago by D12797, which was a 1,000-file change which got almost everything right.
Simplify the message and fix all the `%s` conversions and how they map to parameters.
Test Plan: {F1220400}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9385
Differential Revision: https://secure.phabricator.com/D15722
Summary:
Ref T10696. By default, `node` uses 1.5GB, which is enormous overkill for this service and can crowd out other services if it's running next to things like a database on the same host.
Provide a configuration option to adjust it via `--max-old-space-size` and default to 256MB. It only seems to need about 30M locally, so this should be plenty of headroom.
Test Plan:
Ran `bin/aphlict debug`, things seemed OK.
It takes a long time (days?) to grow to 1.5GB so I can't easily test this locally without a lot of work, but I'll keep an eye on it in production.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10696
Differential Revision: https://secure.phabricator.com/D15720
Summary: Fixes T10816. The way these work is a little unusual since these chunks of file-rendering code are unusuall performance-sensitive, so the Differential version doesn't adapt directly to Diffusion. Both can possibly be unified at some point in the future, although they do slightly different things.
Test Plan: {F1220170}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10816
Differential Revision: https://secure.phabricator.com/D15719
Summary:
Ref T6915. This allows multiple notification servers to talk to each other:
- Every server has a list of every other server, including itself.
- Every server generates a unique fingerprint at startup, like "XjeHuPKPBKHUmXkB".
- Every time a server gets a message, it marks it with its personal fingerprint, then sends it to every other server.
- Servers do not retransmit messages that they've already seen (already marked with their fingerprint).
- Servers learn other servers' fingerprints after they send them a message, and stop sending them messages they've already seen.
This is pretty crude, and the first message to a cluster will transmit N^2 times, but N is going to be like 3 or 4 in even the most extreme cases for a very long time.
The fingerprinting stops cycles, and stops servers from sending themselves copies of messages.
We don't need to do anything more sophisticated than this because it's fine if some notifications get lost when a server dies. Clients will reconnect after a short period of time and life will continue.
Test Plan:
- Wrote two server configs.
- Started two servers.
- Told Phabricator about all four services.
- Loaded Chrome and Safari.
- Saw them connect to different servers.
- Sent messages in one, got notifications in the other (magic!).
- Saw the fingerprinting stuff work on the console, no infinite retransmission of messages, etc.
(This pretty much just worked when I ran it the first time so I probably missed something?)
{F1218835}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6915
Differential Revision: https://secure.phabricator.com/D15711
Summary: Fixes T10812. Make it easier to disambiguate great passwords like `iI|l1oO()thenumber1nospellitout`.
Test Plan: {F1219074}
Reviewers: chad, yelirekim
Reviewed By: yelirekim
Maniphest Tasks: T10812
Differential Revision: https://secure.phabricator.com/D15715
Summary: Updating the subproject and member pages in Projects to new UI
Test Plan: Visit a subproject parent page, visit members pages
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15687
Summary: Default to "All" (maybe "Active" in the future). Adds more info to results.
Test Plan: visit /phurl/, see additional information about URL
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15713
Summary: Fixes T10806. Although browsers don't seem to care about this, it's more correct to support it, and the new test console uses normal `cURL` and does care.
Test Plan:
- Hit the error case for providing a chain but no key/cert.
- Used `openssl s_client -connect localhost:22280` to connect to local Aphlict servers.
- With SSL but no chain, saw `openssl` fail to verify the remote.
- With SSL and a chain, saw `openssl` verify the identify of the remote.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10806
Differential Revision: https://secure.phabricator.com/D15709
Summary:
Ref T10809. Currently, both the proxy and target may mutate URIs (rewriting "svn+ssh://x/diffusion/Y/" to a path on disk).
I believe this previously worked by fate/chance/luck since both URI variants contain the repository information, but the algorithms were tightened up recently with callsign removal.
Stop rewriting them if we're the intracluster proxy -- they only need to be rewritten on the target host.
Test Plan:
- Checked out a proxied SVN repository, with and without a callsign.
- Checked out an unproxied SVN repository, with and without a callsign.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10809
Differential Revision: https://secure.phabricator.com/D15712
Summary:
Fixes T10783 (what little of it remains). Ref T10697.
Aphlict currently uses request paths for two different things:
- multi-tenant instancing in the Phacility cluster (each instance gets its own namespace within an Aphlict server);
- some users configure nginx and apache to do proxying or SSL termination based on the path.
Currently, these can collide.
Put a "~" before the instance name to make it unambiguous. At some point we can possibly just use a GET parameter, but I think there was some reason I didn't do that originally and this sequence of changes is disruptive enough already.
Test Plan: Saw local Aphlict unambiguously recognize "local.phacility.com" as instance "local", with a "~"-style URI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10697, T10783
Differential Revision: https://secure.phabricator.com/D15705
Summary:
Fixes T10697. This finishes bringing the rest of the config up to cluster power levels.
Phabricator is now given an arbitrarily long list of notification servers.
Each Aphlict server is given an arbitrarily long list of ports to run services on.
Users are free to make them meet in the middle by proxying whatever they want to whatever else they want.
This should also accommodate clustering fairly easily in the future.
Also rewrote the status UI and changed a million other things. 🐗
Test Plan:
{F1217864}
{F1217865}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10697
Differential Revision: https://secure.phabricator.com/D15703
Summary: Ref T10697. Mostly straightforward. Also allow the server to have multiple logs and log options in the future (e.g., different verbosities or separate admin/client logs or whatever). No specific plans for this, but the default log is pretty noisy today.
Test Plan: Set up a couple of logs, started server, saw it log to them.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10697
Differential Revision: https://secure.phabricator.com/D15702
Summary: Ref T10697. This isn't everything but starts generalizing options and moving us toward a cluster-ready state of affairs.
Test Plan: Started server in various configurations, hit most (all?) of the error cases with bad configs, sent test notifications.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10697
Differential Revision: https://secure.phabricator.com/D15701
Summary: Ref T10697. This just improves a couple of minor `bin/aphlict` things: make argument parsing more explicit/consistent, consolidate a little bit of duplicated code.
Test Plan: Ran all `bin/aphlict` commands.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10697
Differential Revision: https://secure.phabricator.com/D15698
Summary:
Ref T2783. This allows this worker to run on a machine different to the one that stores the repository, by routing the execution of Git over Conduit calls.
This API method is super gross, but fixing it isn't straightforward and it runs into other complicated considerations. We can fix it later; for now, just define it as "internal" to limit how much mess this creates.
"Internal" methods do not appear on the console.
Test Plan: Ran `bin/repository reparse --change <commit> --trace` on several commits, saw daemons make a Conduit call instead of running a `git` command.
Reviewers: hach-que, chad
Reviewed By: chad
Subscribers: joshuaspence, Korvin, epriestley
Maniphest Tasks: T2783
Differential Revision: https://secure.phabricator.com/D11874
Summary: Fixes T10797. This seems to fix things on my local system.
Test Plan:
- Cloned with a username, got prompted for a password.
- Cloned with a username + password.
- Cloned with a username + bad password (error).
Reviewers: chad
Reviewed By: chad
Subscribers: Grimeh
Maniphest Tasks: T10797
Differential Revision: https://secure.phabricator.com/D15706
Summary:
Ref T10784. Currently, if you terminate SSL at a load balancer (very common) and use HTTP beyond that, you have to fiddle with this setting in your premable or a `SiteConfig`.
On the balance I think this makes stuff much harder to configure without any real security benefit, so don't apply this option to intracluster requests.
Also document a lot of stuff.
Test Plan: Poked around locally but this is hard to test outside of a production cluster, I'll vet it more thoroughly on `secure`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10784
Differential Revision: https://secure.phabricator.com/D15696
Summary:
Ref T10784. On `secure`, logged-out users currently can't browse repositories when cluster/service mode is enabled because they aren't permitted to make intracluster requests.
We don't allow totally public external requests (they're hard to rate limit and users might write bots that polled `feed.query` or whatever which we'd have no way to easily disable) but it's fine to allow intracluster public requests.
Test Plan: Browsed a clustered repository while logged out locally.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10784
Differential Revision: https://secure.phabricator.com/D15695
Summary: Fixes T10772, not sure why this fails, but reverting the code back to old dialog call works.
Test Plan:
- Try to add a new credential when importing a repository.
- Also created a new credential normally, via Passphrase.
- Also edited a credential.
Reviewers: chad
Reviewed By: chad
Subscribers: Korvin
Maniphest Tasks: T10772
Differential Revision: https://secure.phabricator.com/D15691
Summary:
Ref T10751. We currently have a placeholder Almanac document, and a fairly-bad-advice section in Daemons.
Pull these into the modern cluster documentation.
Test Plan: 17 phabricator PHDs
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10751
Differential Revision: https://secure.phabricator.com/D15689
Summary: Fixes T10789. If we aren't configured with a device, we never grabbed a lock in the first place, and should not expect one to be held.
Test Plan: Pushed non-cluster-configured Git SSH repository.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10789
Differential Revision: https://secure.phabricator.com/D15692
Summary:
Ref T4292. This mostly implements the locking/versioning logic for multi-master repositories. It is only active on Git SSH pathways, and doesn't actually do anything useful yet: it just does bookkeeping so far.
When we read (e.g., `git fetch`) the logic goes like this:
- Get the read lock (unique to device + repository).
- Read all the versions of the repository on every other device.
- If any node has a newer version:
- Fetch the newer version.
- Increment our version to be the same as the version we fetched.
- Release the read lock.
- Actually do the fetch.
This makes sure that any time you do a read, you always read the most recently acknowledged write. You may have to wait for an internal fetch to happen (this isn't actually implemented yet) but the operation will always work like you expect it to.
When we write (e.g., `git push`) the logic goes like this:
- Get the write lock (unique to the repository).
- Do all the read steps so we're up to date.
- Mark a write pending.
- Do the actual write.
- Bump our version and mark our write finished.
- Release the write lock.
This allows you to write to any replica. Again, you might have to wait for a fetch first, but everything will work like you expect.
There's one notable failure mode here: if the network connection between the repository node and the database fails during the write, the write lock might be released even though a write is ongoing.
The "isWriting" column protects against that, by staying locked if we lose our connection to the database. This will currently "freeze" the repository (prevent any new writes) until an administrator can sort things out, since it'd dangerous to continue doing writes (we may lose data).
(Since we won't actually acknowledge the write, I think, we could probably smooth this out a bit and make it self-healing //most// of the time: basically, have the broken node rewind itself by updating from another good node. But that's a little more complex.)
Test Plan:
- Pushed changes to a cluster-mode repository.
- Viewed web interface, saw "writing" flag and version changes.
- Pulled changes.
- Faked various failures, got sensible states.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15688
Summary:
Ref T4292. This adds some very basic cluster/device data to the new management view. Nothing interesting yet.
Also deal with disabled bindings a little more cleanly.
Test Plan: {F1214619}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15685
Summary:
Ref T4292. This puts a very rough skeleton in place for the new "Manage Repository" UI, somewhat similar to the "Settings" UI.
Right now, it has one panel with no content, and is not reachable from the UI.
Test Plan: {F1214525}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15683
Summary:
Ref T10756. When repositories are properly configured for the cluster (which is hard to set up today), be smart about which repositories are expected to exist on the current host, and only pull them.
This generally allows daemons to pretty much do the right thing no matter how many copies are running, although there may still be some lock contention issues that need to be sorted out.
Test Plan: {F1214483}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10756
Differential Revision: https://secure.phabricator.com/D15682
Summary: Ref T10702
Test Plan: Open a user profile, attempt to award an archived or previously awarded badge, badges dialog should provide a typeahead, and the suggestions should offer details about whether a badge is archived or already awarded.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T10702
Differential Revision: https://secure.phabricator.com/D15665
Summary:
Ref T4571. Write more of the missing documentation sections and clarify a few things.
Since the "replicating master" check needs a special permission, imposes a performance penalty, is probably very difficult to misconfigure, and likely not a big deal anyway, just drop the idea of trying to automatically detect + prevent it. We still show if it's an issue on the status page, provided we have permission to check.
When you don't have any cluster databases configured, never stop trying to connect to the default master database. We might want to do this eventually as load reduction, but just don't muddy the waters too much for now while things stabilize.
Test Plan:
- Tested functionality in cluster, non-cluster, and degraded-cluster modes.
- Used status console to monitor a health check cycle.
- Read docs.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4571
Differential Revision: https://secure.phabricator.com/D15679
Summary:
Ref T4571. When a database goes down briefly, we fall back to replicas.
However, this fallback is slow (not good for users) and keeps sending a lot of traffic to the master (might be bad if the root cause is load-related).
Keep track of recent connections and fully degrade into "severed" mode if we see a sequence of failures over a reasonable period of time. In this mode, we send much less traffic to the master (faster for users; less load for the database).
We do send a little bit of traffic still, and if the master recovers we'll recover back into normal mode seeing several connections in a row succeed.
This is similar to what most load balancers do when pulling web servers in and out of pools.
For now, the specific numbers are:
- We do at most one health check every 3 seconds.
- If 5 checks in a row fail or succeed, we sever or un-sever the database (so it takes about 15 seconds to switch modes).
- If the database is currently marked unhealthy, we reduce timeouts and retries when connecting to it.
Test Plan:
- Configured a bad `master`.
- Browsed around for a bit, initially saw "unrechable master" errors.
- After about 15 seconds, saw "major interruption" errors instead.
- Fixed the config for `master`.
- Browsed around for a while longer.
- After about 15 seconds, things recovered.
- Used "Cluster Databases" console to keep an eye on health checks: it now shows how many recent health checks were good:
{F1213397}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4571
Differential Revision: https://secure.phabricator.com/D15677
Summary:
Ref T4571. If we fail to connect to the master, automatically try to degrade into a temporary read-only mode ("UNREACHABLE") for the remainder of the request, if possible.
If the request was something like "load the homepage", that'll work fine. If it was something like "submit a comment", there's nothing we can do and we just have to fail.
Detecting this condition imposes a performance penalty: every request checks the connection and gives the database a long time to respond, since we don't want to drop writes unless we have to. So the degraded mode works, but it's really slow, and may perpetuate the problem if the root issue is load-related.
This lays the groundwork for improving this case by degrading futher into a "SEVERED" mode which will persist across requests. In the future, if several requests in a short period of time fail, we'll sever the database host and refuse to try to connect to it for a little while, connecting directly to replicas instead (basically, we're "health checking" the master, like a load balancer would health check a web application server). This will give us a better (much faster) degraded mode in a major service disruption, and reduce load on the master if the root cause is load-related, giving it a better chance of recovering on its own.
Test Plan:
- Disabled master in config by changing the host/username, got degraded automatically to UNREACAHBLE mode immediately.
- Faked full SEVERED mode, requests hit replicas and put me in the mode properly.
- Made stuff work, hit some good pages.
- Hit some non-cluster pages.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4571
Differential Revision: https://secure.phabricator.com/D15674
Summary: Ref T4571. If `cluster.databases` is configured but only has replicas, implicitly drop to read-only mode and send writes to a replica.
Test Plan:
- Disabled the `master`, saw Phabricator automatically degrade into read-only mode against replicas.
- (Also tested: explicit read-only mode, non-cluster mode, properly configured cluster mode).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4571
Differential Revision: https://secure.phabricator.com/D15672
Summary:
Ref T4571. Allows users to click the "read-only mode" notification to get more information about why an install is in read-only mode.
Installs can be in this mode for several reasons (explicit administrative action, no masters defined, no masters reachable), and it's useful to be able to tell the difference.
Test Plan: {F1212930}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4571
Differential Revision: https://secure.phabricator.com/D15671
Summary:
Ref T4571. Ref T10759. Ref T10758. This isn't complete, but gets most of the job done:
- When `cluster.databases` is set up, most things ignore `mysql.host` now.
- You can `bin/storage upgrade` and stuff works.
- You can browse around in the web UI and stuff works.
There's still a lot of weird tricky stuff to navigate, and this has real no advantages over configuring a single server yet (no automatic failover, etc).
Test Plan:
- Configured `cluster.databases` to point at my `t1.micro` hosts in EC2 (master + replica).
- Ran `bin/storage upgrade`, got a new install setup on them properly.
- Survived setup warnings, browsed around.
- Switched back to local config, ran `bin/storage upgrade`, browsed around, went through setup checks.
- Intentionally broke config (bad hosts, no masters) and things seemed to react reasonably well.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4571, T10758, T10759
Differential Revision: https://secure.phabricator.com/D15668
Summary: Ref T4571. The configuration option still doesn't do anything, but add a status panel for basic setup monitoring.
Test Plan:
Here's what a good version looks like:
{F1212291}
Also faked most of the errors it can detect and got helpful diagnostic messages like this:
{F1212292}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4571
Differential Revision: https://secure.phabricator.com/D15667
Summary:
Ref T4571. This adds a new option which allows you to upgrade your one-host configuration to a multi-host configuration by configuring it.
Doing this currently does nothing. I wrote a lot of words about what it is //supposed// to do in the future, though.
Test Plan:
- Tried to configure the option in all the possible bad ways, got errors.
- Read documentation.
Reviewers: chad
Reviewed By: chad
Subscribers: eadler
Maniphest Tasks: T4571
Differential Revision: https://secure.phabricator.com/D15663
Summary:
Ref T4571. There will be a very long path beyond this, but add a basic read-only mode. You can explicitly enable this to put Phabricator in a sort of "maintenance" mode today if you're swapping databases or something.
In the long term, we'll automatically degrade into this mode if the master database is down.
Test Plan:
- Enabled read-only mode.
- Browsed around.
- Didn't immediately see anything that was totally 100% broken.
Most stuff is 80-90% broken right now. For example:
- Stuff like submitting comments doesn't work, and gives you a confusing, unhelpful error.
- None of the UI really knows that it's read-only. EditEngine stuff should all hide itself and say "you can't add new comments while an install is in read-only mode", for example, but currently does not.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4571
Differential Revision: https://secure.phabricator.com/D15662
Summary: Testing out a new 'nav' layout in Settings / Config. Spent a few days here and couldn't find much better overall.
Test Plan: View each page in Settings and in Config. Save some config options. Test mobile, desktop, tablet.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15659
Summary: Fixes T5813, while I'm in here...
Test Plan: Sorted stuff by end date.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5813
Differential Revision: https://secure.phabricator.com/D15657
Summary: Fixes T10684. Fixes T10520. This primarily implements a date/epoch field, and then does a bunch of standard plumbing.
Test Plan:
- Created countdowns.
- Edited countdowns.
- Used HTTP prefilling.
- Created a countdown ending on "Christmas Morning", etc.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10520, T10684
Differential Revision: https://secure.phabricator.com/D15655
Summary: Closes T10690
Test Plan: Open Badges application, go to Advanced Search, search for a badge by its name and see result.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Maniphest Tasks: T10690
Differential Revision: https://secure.phabricator.com/D15656
Summary:
Fixes T8613. This was pretty straightforward, I just never dug into it originally.
`rawResultLimit = 0` just means "no limit", so the fix is to only apply a limit if it is set to some nonzero value.
Also modernize a few pieces of code.
Test Plan: I'm actually not sure this can actually be hit normally? I faked `setGenerateGhosts(true)` into an unrelated query, hit the fatal, then fixed it.
Reviewers: lpriestley, chad
Reviewed By: chad
Maniphest Tasks: T8613
Differential Revision: https://secure.phabricator.com/D15653
Summary: Found another bouncing around.
Test Plan: Review in diff
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15651
Summary: Ref T10262. Instead of dumping an unhelpful 403 "ACCESS DENIED" page on users, explain the most likely cause of the issue and give them a link to return to the file detail page to learn more or get an up-to-date link.
Test Plan: Hit both errors, had a lovely experience with the helpful dialog text.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10262
Differential Revision: https://secure.phabricator.com/D15650
Summary: Ref T6027. We got a not-very-user-friendly default string before.
Test Plan: Selected "Move", didn't change the dropdown, hit submit. Now, got a nice human-readable description of the issue.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6027
Differential Revision: https://secure.phabricator.com/D15649
Summary: Bumps to 14px, fixes some on Differential
Test Plan: view various headers in Differential
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15647
Summary:
Ref T10262. Currently, we always render a tag like this when you `{F123}` an image in remarkup:
```
<img src="/xform/preview/abcdef/" />
```
This either generates the preview or redirects to an existing preview. This is a good behavior in general, because the preview may take a while to generate and we don't want to wait for it to generate on the server side.
However, this flickers a lot in Safari. We might be able to cache this, but we really shouldn't, since the preview URI isn't a legitimately stable/permanent one.
Instead, do a (cheap) server-side check to see if the preview already exists. If it does, return a direct URI. This gives us a stable thumbnail in Safari.
Test Plan:
- Dragged a dog picture into comment box.
- Typed text.
- Thing didn't flicker like crazy all the time in Safari.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10262
Differential Revision: https://secure.phabricator.com/D15646
Summary: Going to render these all normal case instead of all caps, and bump up the font size. Should be more consistent. Yellow if you green anything orange.
Test Plan: grep, lint
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15645
Summary:
Ref T10262. This removes one-time tokens and makes file data responses always-cacheable (for 30 days).
The URI will stop working once any attached object changes its view policy, or the file view policy itself changes.
Files with `canCDN` (totally public data like profile images, CSS, JS, etc) use "cache-control: public" so they can be CDN'd.
Files without `canCDN` use "cache-control: private" so they won't be cached by the CDN. They could still be cached by a misbehaving local cache, but if you don't want your users seeing one anothers' secret files you should configure your local network properly.
Our "Cache-Control" headers were also from 1999 or something, update them to be more modern/sane. I can't find any evidence that any browser has done the wrong thing with this simpler ruleset in the last ~10 years.
Test Plan:
- Configured alternate file domain.
- Viewed site: stuff worked.
- Accessed a file on primary domain, got redirected to alternate domain.
- Verified proper cache headers for `canCDN` (public) and non-`canCDN` (private) files.
- Uploaded a file to a task, edited task policy, verified it scrambled the old URI.
- Reloaded task, new URI generated transparently.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10262
Differential Revision: https://secure.phabricator.com/D15642
Summary:
Ref T10262. Files have an internal secret key which is partially used to control access to them, and determines part of the URL you need to access them. Scramble (regenerate) the secret when:
- the view policy for the file itself changes (and the new policy is not "public" or "all users"); or
- the view policy or space for an object the file is attached to changes (and the file policy is not "public" or "all users").
This basically means that when you change the visibility of a task, any old URLs for attached files stop working and new ones are implicitly generated.
Test Plan:
- Attached a file to a task, used `SELECT * FROM file WHERE id = ...` to inspect the secret.
- Set view policy to public, same secret.
- Set view policy to me, new secret.
- Changed task view policy, new secret.
- Changed task space, new secret.
- Changed task title, same old secret.
- Added and ran unit tests which cover this behavior.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10262
Differential Revision: https://secure.phabricator.com/D15641
Summary:
This reverts commit 3f50ba90f1.
Fixes T10412. Everyone seems to hate this and I don't feel strongly about it. It's definitely a little weird.
Test Plan: Straight revert.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10412
Differential Revision: https://secure.phabricator.com/D15644
Summary: Fixes T10737. I agree that this is a better behavior than always making them blue (boring).
Test Plan:
what
{F1208333}
wut
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T10737
Differential Revision: https://secure.phabricator.com/D15643
Summary:
Ref T6027. Fixes T10734.
- If one of the projects a task is tagged with isn't visible to the user or doesn't have a board, it won't have columns.
- Don't show options for projects with disabled boards.
Test Plan:
- Viewed task with project with no columns; no fatal.
- Viewed task with project with disabled board; no options to move on that board.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10734, T6027
Differential Revision: https://secure.phabricator.com/D15640
Summary:
Ref T6027. Normally, actions use the same order as the form, but in some cases (like moving stuff on workboards) it makes sense to reorder them explicitly.
Pin "Move on board" near the bottom, and "projects/subscribers" at the bottom. I think these are generally reasonable rules in all cases.
Test Plan: Opened menu, saw slightly better action order.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6027
Differential Revision: https://secure.phabricator.com/D15639
Summary:
Ref T6027. Try this out and see how it feels? Clear issues:
- This definitely shouldn't be at the top.
- You should probably be able to select it multiple times?
- Some of the "which columns show up" rules might need adjustment?
- Diamond marker maybe not great?
Not sure I love this but it doesn't feel //terrible//...
Test Plan: {F1207891}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6027
Differential Revision: https://secure.phabricator.com/D15638
Summary: Ref T5214. Fixes T10486. Ref T6027. This exposes the `TYPE_COLUMNS` transaction in a usable way via API, and fixes the interactions via prefilling.
Test Plan:
- Created tasks directly into columns via API.
- Moved tasks between columns via API.
- Used `?column=...` to try to create a template task with valid and bogus column PHIDs.
Reviewers: chad
Reviewed By: chad
Subscribers: AmyLewis
Maniphest Tasks: T5214, T6027, T10486
Differential Revision: https://secure.phabricator.com/D15636
Summary: Ref T6027. This adds human-readable rendering for the new `TYPE_COLUMNS` core transactions.
Test Plan: {F1207784}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6027
Differential Revision: https://secure.phabricator.com/D15635
Summary:
Ref T6027. We currently have two different transaction types:
- `TYPE_PROJECT_COLUMNS` does most of the work, but has a sort of weird structure and isn't really suitable for API use.
- `TYPE_COLUMN` is this weird, junk transaction which mostly just creates the other transaction.
Merge them into a single higher-level `TYPE_COLUMNS` transaction which works properly and has a sensible structure and comprehensive error checking.
Remaining work here:
- I've removed the old rendering logic, but not yet added new logic. I need to migrate the old transaction types and add new rendering logic.
- Although the internal representation is now //suitable// for use in the API, it isn't properly exposed yet.
Test Plan:
- Created tasks into a column.
- Ran unit tests.
- Moved tasks between columns.
- Will perform additional testing in followups.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6027
Differential Revision: https://secure.phabricator.com/D15634
Summary: Ref T10671
Test Plan: Open Conduit application, open `badges.edit` or `badges.search`, create, edit, or query for a badge.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T10671
Differential Revision: https://secure.phabricator.com/D15622
Summary: Modernize Files a bit, use newPage
Test Plan: New file, drag and drop file, view file, edit file
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15631
Summary: Ref T7673. This is really just so I can force admin.phacility.com logout when you log out of an instance, but there are a few other things we could move here eventually, like the WILLREGISTERUSER event.
Test Plan: Logged out of an instance, got logged out of parent (see next change).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7673
Differential Revision: https://secure.phabricator.com/D15629
Summary:
Ref T7303. Currently, our handling of "scope" is fairly rigid and adheres to the spec, but some of these behaviors don't make much sense in practice.
Soften some behaviors and make them more flexible:
**Soft Failure on Unknown Permissions**: If a client asks for a permission we don't know about, just warn that we don't recognize it instead of fataling. In particular, I plan to make `offline_access` and `whoami` implicit. Older clients that request these permissions will still work fine as long as we don't hard-fatal.
**Move `user.whoami` to ALWAYS scope**: Make `whoami` a default permission. We've already done this, in effect; this just formalizes it.
**Tokens no longer expire**: Make `offline_access` (infinite-duration tokens) a default permission. I think the OAuth model doesn't map well to reality. It is common for other providers to issue "temporary" tokens with a duration of multiple years, and the refesh workflow is sort of silly. We can add a "temporary" scope later if we need temporary tokens.
This flow was potentially extra silly with the "log out of Phacility" use case, where we might need to have you log in again before we could log you out, which is bizarre and senseless. Avoid this nonsense.
**Move away from granular permissions**: Users currently get to pick-and-choose which permissions they grant, but this likely rarely/never works in practice and is fairly hostile since applications can't communicate which permissions they need. Applications which can actually operate with only some subset of permissions can make separate requests (e.g., when you activate "cool feature X", it asks for X permission). I think applications that do this are rare; pretty much everything just asks for tons of permissions and everyone grants them.
Making this all-or-nothing is better for well-behaved applications and better for users. It's also slightly better for overzealous applications that ask for more than they need, but whatever. Users can make an informed decision, hopefully, and I plan to let administrators force applications to a subset of permissions once we introduce meaningful scopes.
Test Plan:
- Generated tokens.
- Used tokens.
- Authorized an instance.
- Faked some bogus scopes, got clean authorization.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7303
Differential Revision: https://secure.phabricator.com/D15621
Summary: Converts over to `newPage`
Test Plan: Pull up Settings panel, test a few.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15625
Summary: Ref T7303. This interaction is very oldschool; modernize it to enable/disable instead of "nuke from orbit".
Test Plan:
- Enabled applications.
- Disabled applications.
- Viewed applications in list view.
- Generated new tokens.
- Tried to use a token from a disabled application (got rebuffed).
- Tried to use a token from an enabled application (worked fine).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7303
Differential Revision: https://secure.phabricator.com/D15620
Summary: Runs through Releeph to move to new UI and `newPage`
Test Plan: Ran through product, release, branch, everything seems to work.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15623
Summary: Swaps over to new hotness
Test Plan: Pull up mail view, see new UI
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15616
Summary: Swaps over to `newPage` and `newDialog`
Test Plan: Unsure how to actually pull these up?
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15617
Summary: Updates to use new UI
Test Plan: Save a custom query, edit a custom query
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15618
Summary: Updates Console and Operations page.
Test Plan: Pull up Console, pull up status page
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15615
Summary: Moves these Maniphest pages over to modern UI, components
Test Plan: Batch Edit Tasks, View some reports.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15614
Summary: Ref T7303. This application is currently stone-age tech (no transactions, hard "delete" action). Bring it up to modern specs.
Test Plan:
- Created and edited an OAuth application.
- Viewed transaction record.
- Tried to create something with no name, invalid redirect URI, etc. Was gently rebuffed with detailed explanatory errors.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7303
Differential Revision: https://secure.phabricator.com/D15609
Summary: View various conduit pages and update to new UI and add calls to newPage
Test Plan: View list, view method, make a call.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15613
Summary: Uses modern UI, `newPage`, etc. Changes table behavior to always scroll if too large for container, can't find anything this breaks, but be on the lookout.
Test Plan: Pull up help and view pages, search for some people and projects.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15611
Summary: Single callsite, swap to `newPage`
Test Plan: Visit page, see same status message. Also remove device ready flag.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15610
Summary:
Fixes T10721. When trying to load commits by identifier, we would take some bad pathways in Subversion if the repository had no callsign and end up missing the commits.
Fix this logic so it works for either callsigns (e.g., if passed `rXyyy`) or with PHIDs if passed repositories.
Test Plan:
- Viewed SVN commit in a Subversion repository with no callsign.
- Added a callsign, looked at it again.
- Viewed non-SVN commits in callsign and non-callsign repositories.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10721
Differential Revision: https://secure.phabricator.com/D15607
Summary: Ref T7303. Small modernization.
Test Plan:
- Searched by various users.
- Viewed all, reordered, etc.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7303
Differential Revision: https://secure.phabricator.com/D15606
Summary:
Ref T7303. Ref T7673. This implements an "auth.logout" which:
- terminates all web sessions;
- terminates the current OAuth token if called via OAuth; and
- may always be called via OAuth.
(Since it consumes an OAuth token, even a "malicious" OAuth application can't really be that much of a jerk with this: it can't continuously log you out, since calling the method once kills the token. The application would need to ask your permission again to get a fresh token.)
The primary goal here is to let Phacility instances call this against the Phacility upstream, so that when you log out of an instance it also logs you out of your Phacility account (possibly with a checkbox or something).
This also smooths over the session token code. Before this change, your sessions would get logged out but when you reloaded we'd tell you your session was invalid.
Instead, try to clear the invalid session before telling the user there's an issue. I think that ssentially 100% of invalid sessions are a result of something in this vein (e.g., forced logout via Settings) nowadays, since the session code is generally stable and sane and has been for a long time.
Test Plan:
- Called `auth.logout` via console, got a reasonable logout experience.
- Called `auth.logout` via OAuth.
- Tried to make another call, verified OAuth token had been invalidated.
- Verified web session had been invalidated.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7303, T7673
Differential Revision: https://secure.phabricator.com/D15594
Summary:
Ref T7303. OAuth scope handling never got fully modernized and is a bit of a mess.
Also introduce implicit "ALWAYS" and "NEVER" scopes.
Always give tokens access to meta-methods like `conduit.getcapabilities` and `conduit.query`. These do not expose user information.
Test Plan:
- Used a token to call `user.whoami`.
- Used a token to call `conduit.query`.
- Used a token to try to call `user.query`, got rebuffed.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7303
Differential Revision: https://secure.phabricator.com/D15593
Summary:
Ref T7303. This inches toward properly-behaved cluster logout.
- Use IDs instead of PHIDs in URIs.
- Slightly more modern code.
- Fix some crumb stuff.
Test Plan: Created, edited, viewed, deleted, showed secret for, authorized, test-auth'd an application.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7303
Differential Revision: https://secure.phabricator.com/D15592
Summary: Updates various /people/ pages for new UI and newPage
Test Plan: Review creating people, new people, sending invites, editing a profile, setting a new picture, something with LDAP
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15604
Summary: Cleans up Feed Story individual page
Test Plan: View an individual story by clicking on date.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15599
Summary: No UI updates, just swapping over to `newPage`
Test Plan: Pull up each page.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, yelirekim
Differential Revision: https://secure.phabricator.com/D15601
Summary: Updates fund for new edit UI
Test Plan: Create Fund, Edit Fund
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15595
Summary: Updates Macro Audit Edit page with new UI and newPage
Test Plan: Edit Audio on macro, see new layout, save file.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15598
Summary: Brings the edit paths page in owners up to new UI
Test Plan: Edit some paths, yo.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15596
Summary: Closes T8940, recipient list in badge view should show awarder and date info. Took a first stab at how we want to make the date look, but not sure. Looks odd as it is.
Test Plan: Open badge that has awards. Each recipient in list should have a subheader such as "Awarded by ... on ..."
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T8940
Differential Revision: https://secure.phabricator.com/D15590
Summary: Missed converting this page, scenario. The box was poorly formatted.
Test Plan: Create a new document that needs signed, verify box is correctly spaced and colored.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15591
Summary: Forgot a more efficient way to get badge from award
Test Plan: Badges on user profiles should still show up with awarder handle on the back of the card
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15589
Summary: Ref T8940
Test Plan: Award badge, open recipient profile page, badge should appear in badges list, and flipping the badge card should show who awarded it.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: chad, Korvin
Maniphest Tasks: T8940
Differential Revision: https://secure.phabricator.com/D15570
Summary: Converts Config to new UI, updates to `newPage`
Test Plan: Review all pages in Config, setup issues, ignore an issue, edit a config option
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15587
Summary: Updates Legalpad Manage/Edit with new UI layouts.
Test Plan: Wrote a new document with and without a preamble, edit document, sign document
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15576
Summary: Pulls everything over to two column UI and new edit pages. Removed history view and consolidated some pages.
Test Plan: New Panel, Edit Panel. New Dashboard, Edit Dashboard, View Standalone pages.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15588
Summary: Minor, moves to `newPage`
Test Plan: Test both pages, still work
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15582
Summary: Little straggler here, updates to `newPage`
Test Plan: Review a document, no visibile changes
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15580
Summary: Updates Conpherence pages to use `newPage`
Test Plan: View a Room, view list of joined rooms.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15578
Summary: Just clearing these all out.
Test Plan: Visit channel list and log page.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15577
Summary:
Ref T10709. Two issues:
- If a user sends an invalid `!command`, we can throw, which means we don't return HTTP 200. This makes Mailgun re-send the mail later.
- We don't parse headers of the modern API correctly, so the "Message-ID" failsafe doesn't work. Parse them correctly. I //believe// Mailgun's API changed at some point.
Test Plan:
This is difficult to test exhaustively in isolation. I used Mailgun's web tools to verify the format of the hook request, and faked some requests locally.
I'll keep an eye on this as it goes to production and make sure the fix is correct there.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10709
Differential Revision: https://secure.phabricator.com/D15575
Summary: Modernize and use newer UI
Test Plan: Bounce around various views.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15574
Summary: Updates various Phriction pages to match new UI
Test Plan: New Document, Edit Document, View History, Revert Change
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15572
Summary: Swap over to modern components, `newPage` and `handleRequest`.
Test Plan: `arc lint` :(
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D15571
Summary: Runs through Meta, cleaned up policies and editing email addresses to new UI
Test Plan: Set a new Email address for Maniphest, edit policies.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15569
Summary: Fixes T10704. This is just bad copy-paste -- "O" for "old" should be "N" for "new".
Test Plan:
- Followed steps on T10704.
- Applied patch.
- Marked inline done, replied, etc. No more JS errors.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10704
Differential Revision: https://secure.phabricator.com/D15566
Summary: Cleans up Pholio, moves to two column layout, fix some transaction inconsistencies. This moves "Image" to the MainColumn, which feels fine, but I think we'll likely want some sort of "fullscreen" option for Pholio V2 like we have on workboards perhaps.
Test Plan:
New Mock, Edit Mock, View Mock.
{F1200450}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15564
Summary: Ref T9007
Test Plan: Navigate to "Advanced Search" in Badges, order by rarity, then by commonality. Rarest and most common badges should be ordered, respectively.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Maniphest Tasks: T9007
Differential Revision: https://secure.phabricator.com/D15555
Summary: This doesn't hit the ambiguous case in Diffusion so it seems fine to make it more consistent.
Test Plan: Looked at a little task-o.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15561
Summary: Walks through various object, rule, create forms and transcripts in Herald. Slightly nicer looking.
Test Plan: Make rules, see rules, edit rules, see transcripts.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15559
Summary: Fixes T10672. Cleaning this up myself since I was responsible for the implementation.
Test Plan: Leave a comment, Edit a badge, create a badge.
Reviewers: lpriestley, epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10672
Differential Revision: https://secure.phabricator.com/D15556
Summary: Adds basic commenting to Fund Initiatives.
Test Plan: Leave a comment, see comment.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15554
Summary: Uses BLUE_PROPERTY on Recipients box, removes redundent properties since we render the badge itself already.
Test Plan: View a badge with and without a description.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15553
Summary: [WIP] Tossing this up for safety and to read through it. Need to test, update some of the other flows. This updates everything in Auth for new UI and modern conventions.
Test Plan: Loooots of random testing, new providers, edit providers, logging out, forgot password... more coming.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15550
Summary:
[WIP] Allows awarding a badge from a user profile. Unsure of the interactions here if a user can't award any badges, or if we should just hide this.
Fixes T10688
Fixes T10318
Test Plan: Award some badges. Steal them back.
Reviewers: lpriestley, epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10318, T10688
Differential Revision: https://secure.phabricator.com/D15544
Summary:
Ref T10537. Currently, Nuance has a `NuanceRequestor` object, intended to represent the external user who created content (e.g., a GitHub account or a Twitter account or whatever).
This object is currently almost unused, and its design predates Doorkeeper. In D15541, I chose to use doorkeeper objects instead of NuanceRequestor objects to represent requestors.
I don't currently anticipate a need for such an object, given that we have Doorkeeper. If we do need it in the future for some reason, it would be fairly easy to restore it, create a requestor type which wraps a Doorkeeper object, and then migrate. Not super thrilling to do that, but not a huge mess.
`NuanceItem` still has a `requestorPHID`, but this is now a less formal object PHID instead of a more formal Requestor-object PHID, and holds a doorkeeper exeternal object PHID for GitHub events.
Test Plan:
- Grepped for `nuancerequestor`.
- Ran `bin/storage upgrade -f`.
- Grepped for `requestor`, remaining uses of this term seem reasonable/correct.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10537
Differential Revision: https://secure.phabricator.com/D15546
Summary: This is kinda bad in terms of UI (It just makes a json of the thing and diffs that), but it's a start.
Test Plan: edit rule, create rule, add/remove/edit conditions, actions
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15542
Summary:
Ref T10538. Ref T10537. This creates PHIDs which represent GitHub users, and uses them as the actors for synchronized comments.
I've just made them Doorkeeper objects. There are three major kinds of objects they //could// possibly be:
- Nuance requestor objects.
- External account objects.
- Doorkeeper objects.
I don't think we actually need distinct nuance requestor objects. These don't really do anything right now, and were originally created before Doorkeeper. I think Doorkeeper is a superset of nuance requestor functionality, and better developed and more flexible.
Likewise, doorkeeper objects are much more flexible than external account objects, and it's nice to imagine that we can import from Twootfeed or whatever without needing to build full OAuth for it. I also like less stuff touching auth code, when possible.
Making these separate from external accounts does make it a bit harder to reconcile external users with internal users, but I think that's OK, and that it's generally desirable to show the real source of a piece of content. That is, if I wrote a comment on GitHub but also have a Phabricator account, I think it's good to show "epriestley (GitHub)" (the GitHub user) as the author, not "epriestley" (the Phabricator user). I think this is generally less confusing overall, and we can add more linkage later to make it clearer.
Test Plan:
{F1194104}
{F1194105}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10537, T10538
Differential Revision: https://secure.phabricator.com/D15541
Summary: Ref T10538. This probably gets push events where GitHub does not recognize the author wrong, but I don't have any of those yet.
Test Plan: Added and ran unit tests.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10538
Differential Revision: https://secure.phabricator.com/D15540
Summary: Ref T10537. Add a new content source for Nuance. Prepare for better author attribution.
Test Plan: {F1194038}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10537
Differential Revision: https://secure.phabricator.com/D15539
Summary: Fixes T10670, for users with exclusively archived badges, user profile should show "no badges" message instead of blank box
Test Plan: Award badge to user with no badges, archive badge, user profile should show "no badges" message under badges.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T10670
Differential Revision: https://secure.phabricator.com/D15538
Summary:
Ref T10537.
- Let nuance items render custom curtain panels.
- Add a custom panel linking to the imported task, if one exists.
- Actually extract comments properly.
Test Plan:
Unit tests, plus:
{F1193800}
{F1193801}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10537
Differential Revision: https://secure.phabricator.com/D15537
Summary: Ref T10677, Awarding/revoking badge should create a feed story on homepage with badge handle recipient handles
Test Plan: Award/revoke badge, open Feed, should see story with badge link and recipient links.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T10677
Differential Revision: https://secure.phabricator.com/D15534
Summary: Ref T10677, awarding/revoking a badge should create timeline entries with titles that are more clear (excludes homepage feed stories)
Test Plan: Award/revoke a badge to single or multiple users. See timeline entries that reflect those actions.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T10677
Differential Revision: https://secure.phabricator.com/D15533
Summary: Cleans up EditEngine, adds new layout to EditEngine and descendents
Test Plan: Test creating a new form, reordering, marking and unmarking defaults. View new forms.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15531
Summary: Adds headers, new layout to edit panels on Almanac.
Test Plan: Pull up each edit panel in sandbox, save form.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15527
Summary: Ref T8996, Convert badge recipients from Edges to actual BadgeAward objects
Test Plan: Create badge, award it to recipient. Make sure adding/removing recipients works. (Still need to migrate exisiting recipients to new table and need to create activity feed blurbs)
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: chad, Korvin
Maniphest Tasks: T8996
Differential Revision: https://secure.phabricator.com/D15014
Summary:
Fixes T10385. Two issues:
- `$show_blame` and `$show_color` were improperly swapped.
- Code to hide these columns got dropped somewhere, probably in my recent-ish rewrite.
Test Plan:
- Showed/hid blame.
- Showed/hid colors.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10385
Differential Revision: https://secure.phabricator.com/D15528
Summary:
Ref T10537. For Nuance, I want to introduce new sources (like "GitHub" or "GitHub via Nuance" or something) but this needs to modularize eventually.
Split ContentSource apart so applications can add new content sources.
Test Plan:
This change has huge surface area, so I'll hold it until post-release. I think it's fairly safe (and if it does break anything, the breaks should be fatals, not anything subtle or difficult to fix), there's just no reason not to hold it for a few hours.
- Viewed new module page.
- Grepped for all removed functions/constants.
- Viewed some transactions.
- Hovered over timestamps to get content source details.
- Added a comment via Conduit.
- Added a comment via web.
- Ran `bin/storage upgrade --namespace XXXXX --no-quickstart -f` to re-run all historic migrations.
- Generated some objects with `bin/lipsum`.
- Ran a bulk job on some tasks.
- Ran unit tests.
{F1190182}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10537
Differential Revision: https://secure.phabricator.com/D15521
Summary: Updates the Harbormaster UI to match the new two column everywhere else.
Test Plan: Did best I could, tested builds, plans, steps, buildables. Unable to test lint/unit locally, I need to set that up. Kick the tires for me pls. :3
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15523
Summary: Ref T10537. Show when an object is bridged to something external.
Test Plan: {F1190099}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10537
Differential Revision: https://secure.phabricator.com/D15520
Summary:
Fixes T10665. See that task for discussion.
Because `$head_map` is not properly re-initialized for each ref we check, pushes which affect multiple branches (say, "A" and "B") can have information bleed from the first branch check to the second branch.
To trigger a problem behavior, you can push one commit which updates an existing branch, plus one commit which creates a new branch. If they process in the right order, the `$head_map` from the updated branch will bleed into the `$head_map` for the new branch and trigger an incorrect head split detection.
Test Plan:
- Pushed a set of changes which updated `branch-a` and created `branch-b`.
- Before change: improper detection of split heads.
- After change: clean push.
- Pushed a set of changes which split the head of `branch-d`.
- Correct detection of split heads.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10665
Differential Revision: https://secure.phabricator.com/D15522
Summary: Ref T10538. This makes us render better human-readable descriptions of more GitHub event types.
Test Plan: Ran unit tests.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10538
Differential Revision: https://secure.phabricator.com/D15516
Summary: Ref T10538. Very sloppy, but starting to sort of work. This sort of gets a piece of framework into a reasonable spot, next couple of diffs are going to be "extract comment text" and "show stuff in the UI" sorts of things.
Test Plan: {F1186726}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10538
Differential Revision: https://secure.phabricator.com/D15511
Summary: This URI is currently a little whack.
Test Plan:
- With MFA, clicked "Edit Subscription" on a subscription.
- Clicked "Cancel".
- Before: Sent to `/phortune/phortune/edit/...`, a 404.
- After: Properly returned to subscription detail page.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15514
Summary: Moves everything I could find in Phortune to new UI layouts.
Test Plan: Tested every page I could get two, unclear how to test subscriptions.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15513
Summary:
Ref T10537. Generally, when users interact with Nuance items we'll dump a command into a queue and apply it in the background. This avoids race conditions with multiple users interacting with an item, which Nuance is more subject to than other applications because it has an import/external component.
The "sync" command doesn't actually do anything yet.
Test Plan: {F1186365}
Reviewers: chad
Reviewed By: chad
Subscribers: Luke081515.2
Maniphest Tasks: T10537
Differential Revision: https://secure.phabricator.com/D15506
Summary: Ref T10538. This extracts and renders URIs for GitHub events so we can link to the original thing on GitHub.
Test Plan: {F1186332}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10538
Differential Revision: https://secure.phabricator.com/D15505
Summary:
Ref T10537. This allows item types to expose item actions. Eventually these actions might be things like "promote to task", "tweet reply", "ban user forever", etc.
For now, provide a simple action which shows a raw item in a dialog.
Test Plan: {F1185573}
Reviewers: chad
Reviewed By: chad
Subscribers: Luke081515.2
Maniphest Tasks: T10537
Differential Revision: https://secure.phabricator.com/D15504
Summary:
Ref T10537. These are objects which are bound to some external object, like a Maniphest task which is a representation of a GitHub issue.
This doesn't do much yet and may change, but my thinking is:
- I'm putting these on-object instead of on edges because I think we want to actively change the UI for them (e.g., clearly call out that the object is bridged) but don't want every page to need to do extra queries in the common case where zero bridged objects exist anywhere in the system.
- I'm making these one-to-one, more or less: an issue can't be bridged to a bunch of tasks, nor can a bunch of tasks be bridged to a single issue. Pretty sure this makes sense? I can't come up with any reasonable, realistic cases where you want a single GitHub issue to publish to multiple different tasks in Maniphest.
- Technically, one type of each bridgable object could be bridged, but I expect this to never actually occur. Hopefully.
Test Plan: Ran storage upgrade, loaded some pages.
Reviewers: chad
Reviewed By: chad
Subscribers: Luke081515.2
Maniphest Tasks: T10537
Differential Revision: https://secure.phabricator.com/D15502
Summary: This is failing locally for me, set to getViewer and pull up cart.
Test Plan: View cart with a description.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15509
Summary: Ref T9456. This makes everything work, except that CircleCI doesn't fetch tags which are not ancestors of branch heads.
Test Plan: Ran passing builds through CircleCI.
Reviewers: chad
Reviewed By: chad
Subscribers: dpaola2, JustinTulloss
Maniphest Tasks: T9456
Differential Revision: https://secure.phabricator.com/D14288
Summary: Ref T9456. Some rough edges and we can't complete the build yet since I haven't written a webhook, but this mostly seems to be working.
Test Plan:
- Ran this build on some stuff.
- Ran a normal HTTP step build to make sure I didn't break that.
{F880301}
{F880302}
{F880303}
Reviewers: chad
Reviewed By: chad
Subscribers: JustinTulloss, joshma
Maniphest Tasks: T9456
Differential Revision: https://secure.phabricator.com/D14286
Summary: Ref T9456. This is just a convenience type for things like API tokens, to make it harder for users to make mistakes and keep SSH keys out of the dropdown for "choose your API token".
Test Plan: {F879820}
Reviewers: chad
Reviewed By: chad
Subscribers: joshuaspence
Maniphest Tasks: T9456
Differential Revision: https://secure.phabricator.com/D14284
Summary: Fixes T10648. This was goofed and always did a meaningless no-op slice -- I mucked it up while doing the disabled project stuff elsewhere.
Test Plan:
- Tagged something with 5 projects.
- Saw the list sliced to 4 (the limit) with "...".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10648
Differential Revision: https://secure.phabricator.com/D15508
Summary:
Fixes T10646. When you load the page or click "New Condition" or "New Action", we try to add a condition and action with some default values.
Currently, the logic just sets everything to `null` or `'default'`. This technically works in Safari, but is less successful in Chrome. (I think Safari prevents you from picking an invalid value.)
Instead of relying on the browser to pick the right value, set the correct value explicitly.
Test Plan:
- Created a new rule in Chrome, Safari.
- Added fields and conditions in Chrome, Safari.
- Edited existing rules in Chrome, Safari.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10646
Differential Revision: https://secure.phabricator.com/D15507
Summary: Updates Spaces to new two column layout
Test Plan: Create a space, edit a space
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15503
Summary: Fixes T10234. This usage is unusual, out of date, and has some bad interactions with engines and custom rules.
Test Plan:
- Added `CustomInlineCodeRule` from P1129 as an extension rule.
- Put a custom `<code> ... </code>` block in a Maniphest task description.
- Saw fatal as described in task; applied change; saw rule work properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10234
Differential Revision: https://secure.phabricator.com/D15501
Summary:
D9087 adds a nice typeahead but breaks the existing regex
search by quoting the pattern. Ideally, this change won't break the
typeahead, which as far as I can tell doesn't use the `pattern`
argument.
Test Plan:
Not yet.
RFC as to whether this change makes sense, will fix my local setup and resend if so.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15500
Summary: Ref T7789. Implement proper detection for read-only requests. Previously, we assumed every request was read/write and required lots of permissions, but we don't need "Can Push" permission if you're only cloning/fetching/pulling.
Test Plan:
- Set push policy to "no one".
- Fetched, got clean data out of LFS.
- Tried to push, got useful error.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7789
Differential Revision: https://secure.phabricator.com/D15499
Summary: Fixes T10625.
Test Plan: Faked this locallly and it looked OK, I'll check the mail in production. :3333
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10625
Differential Revision: https://secure.phabricator.com/D15497
Summary:
- Fix spacing on InfoView inside collasped boxes
- Fix spacing on stacked PropertyLists in TwoColumn
- Fix spacing on Readmes on Tablets
- Fix unset variable on importing commits
Test Plan: Review each of the above cases.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15496
Summary: Ref T7789. This isn't the most perfect UI imaginable, but it's similar to what GitHub does and seems reasonable.
Test Plan:
{F1180271}
{F1180272}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7789
Differential Revision: https://secure.phabricator.com/D15494
Summary: Ref T7789. Make sure these get cleaned up when a repository is destroyed.
Test Plan:
- Created a new repository.
- Pushed some LFS data to it.
- Used `bin/remove destroy` to nuke it.
- Verified the LFS stuff was cleaned up and the underlying files were destroyed (`SELECT * FROM repository_gitlfsref`, etc).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7789
Differential Revision: https://secure.phabricator.com/D15493
Summary:
Ref T7789. Ref T10604. This implements the `upload` action, which streams file data into Files.
This makes Git LFS actually work, at least roughly.
Test Plan:
- Tracked files in an LFS repository.
- Pushed LFS data (`git lfs track '*.png'; git add something.png; git commit -m ...; git push`).
- Pulled LFS data (`git checkout master^; rm -rf .git/lfs; git checkout master; open something.png`).
- Verified LFS refs show up in the gitlfsref table.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7789, T10604
Differential Revision: https://secure.phabricator.com/D15492
Summary: I think I like this better -- but maybe right-aligned?
Test Plan:
{F1180295}
{F1180296}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15495
Summary:
Ref T7789. This implements:
- A new table to store the `<objectHash, filePHID>` relationship between Git LFS files and Phabricator file objects.
- A basic response to `batch` commands, which return actions for a list of files.
Test Plan:
Ran `git lfs push origin master`, got a little further than previously:
```
epriestley@orbital ~/dev/scratch/poemslocal $ git lfs push origin master
Git LFS: (2 of 1 files) 174.24 KB / 87.12 KB
Git LFS operation "upload/b7e0aeb82a03d627c6aa5fc1bbfd454b6789d9d9affc8607d40168fa18cf6c69" is not supported by this server.
Git LFS operation "upload/b7e0aeb82a03d627c6aa5fc1bbfd454b6789d9d9affc8607d40168fa18cf6c69" is not supported by this server.
```
With `GIT_TRACE=1`, this shows the batch part of the API going through.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7789
Differential Revision: https://secure.phabricator.com/D15489
Summary:
adds the `{{PHID....}}` rule. Should mostly be useful in UI code that refers to Objects.
It doesn't add any mention links/transactions.
Test Plan: Comment with this, see email (plain + html) and comment box.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15488
Summary: This updates (all?) of Diffusion/Audit to new UI, included edit and other extra form pages. It's fairly complete but I don't know all the nooks and crannies so to speak to fully verify I didn't mess anything up.
Test Plan: Tested creating new repositories, browsing, searching, auditing. Need more eyes.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15487
Summary:
Ref T7789. This builds on top of `git-lfs-authenticate` to detect LFS requests, read LFS tokens, and route them to a handler which can do useful things.
This handler promptly drops them on the floor with an error message.
Test Plan:
Here's a transcript showing the parts working together so far:
- `git-lfs` connects to the server with SSH, and gets told how to connect with HTTP to do uploads.
- `git-lfs` uses HTTP, and authenticates with the tokens properly.
- But the server tells it to go away, and that it doesn't support anything, so the operation ultimately fails.
```
$ GIT_TRACE=1 git lfs push origin master
12:45:56.153913 git.c:558 trace: exec: 'git-lfs' 'push' 'origin' 'master'
12:45:56.154376 run-command.c:335 trace: run_command: 'git-lfs' 'push' 'origin' 'master'
trace git-lfs: Upload refs origin to remote [master]
trace git-lfs: run_command: git rev-list --objects master --not --remotes=origin
trace git-lfs: run_command: git cat-file --batch-check
trace git-lfs: run_command: git cat-file --batch
trace git-lfs: run_command: 'git' config -l
trace git-lfs: tq: starting 3 transfer workers
trace git-lfs: tq: running as batched queue, batch size of 100
trace git-lfs: prepare upload: b7e0aeb82a03d627c6aa5fc1bbfd454b6789d9d9affc8607d40168fa18cf6c69 lfs/dog1.jpg 1/1
trace git-lfs: tq: sending batch of size 1
trace git-lfs: ssh: local@localvault.phacility.com git-lfs-authenticate diffusion/18/poems.git upload
trace git-lfs: api: batch 1 files
trace git-lfs: HTTP: POST http://local.phacility.com/diffusion/POEMS/poems.git/info/lfs/objects/batch
trace git-lfs: HTTP: 404
trace git-lfs: HTTP: {"message":"Git LFS operation \"objects\/batch\" is not supported by this server."}
trace git-lfs: HTTP:
trace git-lfs: api: batch not implemented: 404
trace git-lfs: run_command: 'git' config lfs.batch false
trace git-lfs: tq: batch api not implemented, falling back to individual
trace git-lfs: ssh: local@localvault.phacility.com git-lfs-authenticate diffusion/18/poems.git upload b7e0aeb82a03d627c6aa5fc1bbfd454b6789d9d9affc8607d40168fa18cf6c69
trace git-lfs: api: uploading (b7e0aeb82a03d627c6aa5fc1bbfd454b6789d9d9affc8607d40168fa18cf6c69)
trace git-lfs: HTTP: POST http://local.phacility.com/diffusion/POEMS/poems.git/info/lfs/objects
trace git-lfs: HTTP: 404
trace git-lfs: HTTP: {"message":"Git LFS operation \"objects\" is not supported by this server."}
trace git-lfs: HTTP:
trace git-lfs: tq: retrying 1 failed transfers
trace git-lfs: ssh: local@localvault.phacility.com git-lfs-authenticate diffusion/18/poems.git upload b7e0aeb82a03d627c6aa5fc1bbfd454b6789d9d9affc8607d40168fa18cf6c69
trace git-lfs: api: uploading (b7e0aeb82a03d627c6aa5fc1bbfd454b6789d9d9affc8607d40168fa18cf6c69)
trace git-lfs: HTTP: POST http://local.phacility.com/diffusion/POEMS/poems.git/info/lfs/objects
trace git-lfs: HTTP: 404
trace git-lfs: HTTP: {"message":"Git LFS operation \"objects\" is not supported by this server."}
trace git-lfs: HTTP:
Git LFS: (0 of 1 files) 0 B / 87.12 KB
Git LFS operation "objects" is not supported by this server.
Git LFS operation "objects" is not supported by this server.
```
Reviewers: chad
Reviewed By: chad
Subscribers: eadler
Maniphest Tasks: T7789
Differential Revision: https://secure.phabricator.com/D15485
Summary:
Ref T7789. This implements a (probably) usable "git-lfs-authenticate" on top of the new temporary token infrastructure.
This won't actually do anything yet, since nothing reads the tokens.
Test Plan:
```
$ ./bin/ssh-exec --phabricator-ssh-user admin --ssh-command 'git-lfs-authenticate'
phabricator-ssh-exec: Expected `git-lfs-authenticate <path> <operation>`, but received too few arguments.
```
```
$ ./bin/ssh-exec --phabricator-ssh-user admin --ssh-command 'git-lfs-authenticate x'
phabricator-ssh-exec: Unrecognized repository path "x". Expected a path like "/diffusion/X/" or "/diffusion/123/".
```
```
$ ./bin/ssh-exec --phabricator-ssh-user admin --ssh-command 'git-lfs-authenticate diffusion/22'
Exception: Expected `git-lfs-authenticate <path> <operation>`, but received too few arguments.
```
```
$ ./bin/ssh-exec --phabricator-ssh-user admin --ssh-command 'git-lfs-authenticate diffusion/22 y'
Exception: Git LFS operation "y" is not supported by this server.
```
```
$ ./bin/ssh-exec --phabricator-ssh-user admin --ssh-command 'git-lfs-authenticate diffusion/22 upload'
{"header":{"Authorization":"Basic QGdpdC1sZnM6NmR2bDVreWVsaXNuMmtnNXBtbnZwM3VlaWhubmI1bmI="},"href":"http:\/\/local.phacility.com\/diffusion\/22\/new-callsign-free-repository.git\/info\/lfs"}
```
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7789
Differential Revision: https://secure.phabricator.com/D15482
Summary:
Ref T10560. Reverts D15460. See that task for discussion: we dug up some more information to explain the behavior, and this key was just sort of sidestepping an analyze/cardinality estimate issue on the index.
With proper cardinality estimates it shouldn't be used, so just nuke it.
Test Plan: Ran `bin/storage adjust`, saw key drop.
Reviewers: eadler, chad
Reviewed By: chad
Maniphest Tasks: T10560
Differential Revision: https://secure.phabricator.com/D15486
Summary: Fixes T10603. This is the last of the ad-hoc temporary tokens.
Test Plan:
- Used a file token.
- Viewed type in {nav Config > Temporary Tokens}.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10603
Differential Revision: https://secure.phabricator.com/D15481
Summary: Ref T10603. Swap these over and give them nice UI strings.
Test Plan:
- Refreshed a Twitter OAuth link.
- Unlinked and re-linked a Twitter account.
- Viewed the new type in {nav Config > Temporary Tokens}.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10603
Differential Revision: https://secure.phabricator.com/D15480
Summary:
Ref T10603. We have a couple of sort of ad-hoc tokens, so start formalizing them. First up is MFA tokens.
Also adds a new config module panel for these.
Test Plan:
- Added MFA.
- Added MFA, intentionally fumbled the input, completed the workflow.
- Removed MFA.
- Viewed tokens, saw MFA sync tokens.
- Viewed new module config panel.
{F1177014}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10603
Differential Revision: https://secure.phabricator.com/D15479
Summary:
Ref T10603. This makes minor updates to temporary tokens:
- Rename `objectPHID` (which is sometimes used to store some other kind of identifier instead of a PHID) to `tokenResource` (i.e., which resource does this token permit access to?).
- Add a `userPHID` column. For LFS tokens and some other types of tokens, I want to bind the token to both a resource (like a repository) and a user.
- Add a `properties` column. This makes tokens more flexible and supports custom behavior (like scoping LFS tokens even more tightly).
Test Plan:
- Ran `bin/storage upgrade -f`, got a clean upgrade.
- Viewed one-time tokens.
- Revoked one token.
- Revoked all tokens.
- Performed a one-time login.
- Performed a password reset.
- Added an MFA token.
- Removed an MFA token.
- Used a file token to view a file.
- Verified file token was removed after viewing file.
- Linked my account to an OAuth1 account (Twitter).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10603
Differential Revision: https://secure.phabricator.com/D15478
Summary:
Ref T10603. This converts existing hard-codes to modular constants.
Also removes one small piece of code duplication.
Test Plan:
- Performed one-time logins.
- Performed a password reset.
- Verified temporary tokens were revoked properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10603
Differential Revision: https://secure.phabricator.com/D15476
Summary:
Ref T10603. For LFS, we need to issue a new type of temporary token.
This makes the temporary token code modular so applications can add new token types without modifying the Auth application.
(I'm moving slowly here because it impacts authentication.)
Test Plan:
- Used `bin/auth recover` to get a one-time token from the CLI.
- Used "Forgot your password?" to get a one-time token from the web UI.
- Followed the web UI token to initiate a password reset, prompting generation of a password token.
- Viewed these tokens in the web UI:
{F1176908}
- Revoked a token.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10603
Differential Revision: https://secure.phabricator.com/D15475
Summary: Fixes T10591. This was accidentally reverted in 148a50e48b, probably when resolvign a merge/rebase.
Test Plan: Will push to production.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10591
Differential Revision: https://secure.phabricator.com/D15474
Summary: Updates Drydock to use two column + curtain layouts.
Test Plan: Tested what I could get to, need @epriestley to run this locally for edge cases.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D15467
Summary:
First pass at converting Differential, I likely have some buggy-poos but thought I'd toss this up now in case very bad bugs present.
To do:
- Need to put status back on Hovercards
- "Diff Detail" probably needs a better design
Test Plan: Looking at lots of diffs, admittedly I dont have harbormaster, etc, running locally. Checked Diffusion for Table of Content changes on small and large commits.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15463
Summary: Fixes T10539. When building mail targets, we fail to preserve whether a recipient was originally "To" or "Cc", and just move everyone to "To".
Test Plan:
Added a comment to a task with a "To" user and a "Cc" user, with `metamta.placeholder-to-recipient` set and `metamta.one-mail-per-recipient` set.
Got mail with me Cc'd as the Cc'd user:
{F1172020}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10539
Differential Revision: https://secure.phabricator.com/D15465
Summary: Fixes T10546. Some day, decades from now, we can revisit this when we iterate on Phrequent. Just don't regress for no real reason in the meantime, since it's easy enough to keep it working in reasonable shape.
Test Plan: {F1169096}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10546
Differential Revision: https://secure.phabricator.com/D15461
Summary:
Ref T10563. This isn't a complete fix, but should make viewing complex inline threads a little more manageable.
This just tries to put stuff in thread order instead of in pure chronological order. We can likely improve the display treatment -- this is a pretty minimal approach, but should improve clarity.
Test Plan:
T10563 has a "before" shot. Here's the "after":
{F1169018}
This makes it a bit easier to follow the conversations.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10563
Differential Revision: https://secure.phabricator.com/D15459
Summary:
Ref T10493.
- Call this action "Unassigned" instead of "Up For Grabs", since the latter implies that it's OK for anyone to grab it, which is a social/context thing that we probably shouldn't assume.
- Show who a task was previously assigned to in the transaction.
The text is a little clunky, yell if you've got a better wording? Or maybe I'll come up with something.
Test Plan: {F1166299}
Reviewers: chad
Reviewed By: chad
Subscribers: cburroughs
Maniphest Tasks: T10493
Differential Revision: https://secure.phabricator.com/D15454
Summary:
Ref T10560. I don't fully understand what MySQL is doing here, but it looks like this key improves the problematic dataset in practice.
(It makes sense that this key helps, I'm just not sure why the two separate keys and the UNION ALL are so bad.)
This key isn't hugely expensive to add, so we can try it and see if there are still issues.
Test Plan: Ran `bin/storage adjust`, saw key added to table. Used `SHOW CREATE TABLE ...` to verify the key exists. Used `EXPLAIN SELECT ...` to make sure MySQL actually uses it.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10560
Differential Revision: https://secure.phabricator.com/D15460
Summary: I think this works?
Test Plan:
i am wizard
{F1168808}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15457
Summary: Adds a date with the author name on the Authored By panel in Maniphest. A basic treatment, will see how it feels.
Test Plan: Look at a few tasks
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15456
Summary:
To improve the performance of Herald, we attempt to generate the value for each field (e.g., a task title) only once.
For most field values this is cheap, but for some (like a commit's branches) it can be quite expensive. We only want to pay this cost once, so we cache field values.
However, D12957 accidentally added a check where we bypass the cache and generate the value for every field, before reading the cache. This causes us to generate each field for every rule that uses it, plus one extra time.
Instead, use the cache for this check, too. Also allow the cache to cache `null`, since it can be expensive to generate `null` even though the value isn't too interesting.
The value of this early hit isn't even used (we only care if it throws or not).
Test Plan:
- Wrote a rule like "if any condition matches: branches contain a, branches contain b, branches contain c".
- Put `phlog(new Exception())` in `DiffusionCommitBranchesHeraldField`.
- Before patch, saw `bin/repository reparse --herald <any commit>` compute branches three times.
- After patch, saw only one computation.
- Verified field values in the transcript view
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15451
Summary:
Ref T10538.
This is a tiny fraction of the API. GitHub has 25 primary event types; we currently partially parse 3 of them. GitHub has 17 issue event types; we currently partially parse 12.
Test Plan: Ran `arc unit`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10538
Differential Revision: https://secure.phabricator.com/D15448
Summary:
Ref T10538. This sets up a Doorkeeper bridge for GitHub issues, and pulls issues from GitHub to create ExternalObject references.
Broadly, does nothing useful.
Test Plan: Put a `var_dump()` in there somewhere and saw it probably do something when running `bin/nuance update --item 44`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10538
Differential Revision: https://secure.phabricator.com/D15447
Summary:
Ref T10538. The primary GitHub event activity stream does not report minor events (labels, milestones, etc).
GitHub has a second, similar activity stream which does report these events (the "Issues Events API").
Use two separate cursors: one consumes the primary stream; the second consumes the events stream.
One possible issue with this is that we may write events in a different order than they occurred, so GitHub shows "comment, label, close" but we show "comment, close, label" or similar. This is probably OK because the secondary API doesn't seem to have any very important events (e.g., it's probably fine if label changes are out-of-order), but we can conceivably put some buffer stage in between the two if it's an issue.
Test Plan: {F1164894}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10538
Differential Revision: https://secure.phabricator.com/D15446
Summary: Fixes T10545. Converts layout to two column.
Test Plan: Review a few project manage pages, see new layout and flag ability.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10545
Differential Revision: https://secure.phabricator.com/D15450
Summary: Ref T10545, this brings flags back? and converts the layout to two column w/curtain
Test Plan: View a few manage pages.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10545
Differential Revision: https://secure.phabricator.com/D15449
Summary:
Ref T10537. This adds an update daemon for pulling item data (e.g., figuring out who the author of a GitHub comment is) and routing items (e.g., sending them to a queue or applying them directly to a task).
Also adds `bin/nuance update --item X` for doing this manually for debugging.
And adds item types, for specializing item behavior. Previously, sources completely dictated item behavior, but I think we want something a little more flexible.
Test Plan:
- This still does nothing.
- Ran `bin/nuance update --item 15`.
- Saw an item route to a default queue.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10537
Differential Revision: https://secure.phabricator.com/D15441
Summary: This inverts colors and icons a bit, so they're not as harsh. So instead of a dark green item with white icon, its now light green with a dark green icon. I've also changed all text and comment boxes to be "grey" visually to separate out the UI from converation/actions. Give it a spin and let me know how this feels. I still need to update the comment UI.
Test Plan:
UIExamples, lots of various tasks and diffs.
{F1163837}
{F1163839}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15442
Summary:
Ref T10537. Ref T10538. This polls the GitHub events API and creates Nuance items from the raw data.
It does nothing useful with them.
Test Plan:
- Polled GitHub.
- Saw some items get created.
- X-Poll-Interval seemed to work.
- ETag seemed to work.
- Recognizing when we hit items we've already seen seemed to work.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10537, T10538
Differential Revision: https://secure.phabricator.com/D15440
Summary: Cleaner UI, moved visit to be button.
Test Plan: Make a phurl about cats, click on it.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15385
Summary:
Ref T10537. More infrastructure:
- Put a `bin/nuance` in place with `bin/nuance import`. This has no useful behavior yet.
- Allow sources to be searched by substring. This supports `bin/nuance import --source whatever` so you don't have to dig up PHIDs.
Test Plan:
- Applied migrations.
- Ran `bin/nuance import --source ...` (no meaningful effect, but works fine).
- Searched for sources by substring in the UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10537
Differential Revision: https://secure.phabricator.com/D15436
Summary:
Ref T10537. Some sources (like the future "GitHub Repository" source) need to poll remotes.
- Provide a mechanism for sources to emit import cursors.
- Hook them into the trigger daemon so they'll fire periodically.
- Provide some storage.
This diff does nothing useful or interesting, and is pure infrastructure.
Test Plan:
- Ran `bin/storage upgrade -f`, no adjustment issues.
- Poked around Nuance.
- Ran the trigger daemon, verified it didn't crash and checked for Nuance stuff to do.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10537
Differential Revision: https://secure.phabricator.com/D15435
Summary: Ref T10537. Converts sources to EditEngine.
Test Plan:
- Created a new source.
- Edited an existing source.
- Submitted a complaint with the complaint form.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10537
Differential Revision: https://secure.phabricator.com/D15434
Summary: See D15432. There, we can use this test to check if the user //could// reassign the task by using "Edit Form" or the stacked actions, so any dedicated "claim" element is consistent with the other permissions.
Test Plan:
- Added a `var_dump($can_reassign)` after the call.
- Saw `true`.
- Edited the edit form, locked and disabled "Assigned To".
- Saw `false`.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15433
Summary: Ref T10537. Update queue editing to use EditEngine.
Test Plan:
- Created a new queue.
- Edited an existing queue.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10537
Differential Revision: https://secure.phabricator.com/D15431
Summary: Ref T10537. Minor updates to simplify and modernize these codepaths.
Test Plan: Searched for queues and sources.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10537
Differential Revision: https://secure.phabricator.com/D15429
Summary: Ref T10537. Minor cleanup of controllers to be more modern / work better on mobile.
Test Plan: Browsed all queue / source pages.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10537
Differential Revision: https://secure.phabricator.com/D15428
Summary: Ref T10093. Changes must be pushed to staging before they can be landed from the web.
Test Plan:
Changes must be pushed to staging before they can be landed from the web.
{F1161909}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10093
Differential Revision: https://secure.phabricator.com/D15427
Summary:
By default, `bin/phd debug` activates `--trace`, which is incredibly verbose.
Instead, be moderately verbose by default, and only include tracing if `--trace` was passed to `bin/phd debug`.
See also D15422.
Test Plan:
- Ran `bin/phd debug task`, got moderate amount of most useful debug output.
- Ran `bin/phd debug task --trace`, got very verbose, detailed low-level debug output.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15423
Summary: Ref T10093. Show better errors when a commit fails because it has already been merged and when a fetch fails because the ref isn't present in the remote.
Test Plan:
{F1160794}
{F1160795}
Reviewers: chad
Reviewed By: chad
Subscribers: michaeljs1990, yelirekim
Maniphest Tasks: T10093
Differential Revision: https://secure.phabricator.com/D15420
Summary: Moves over everything except Maniphest, which has some special behavior.
Test Plan:
- Viewed a badge.
- Viewed a calendar event.
- Viewed a countdown.
- Viewed a Fund initiative.
- Viewed a Herald rule.
- Viewed a macro.
- Viewed an application.
- Viewed an owners package.
- Viewed a credential.
- Viewed a Ponder question.
- Viewed a poll.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15416
Summary: Moves Maniphest over, and allows application to provide ad-hoc panels more easily.
Test Plan: {F1160591}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15417
Summary: Convert Almanac interfaces to Curtain views.
Test Plan: Viewed Services, Bindings, Devices, Namespaces and Networks.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15415
Summary:
This opens up the new action column to have specialized rendering and behavior. Briefly:
- Converted applications (right now, only Paste) render a `CurtainView` to build the column content.
- This view uses new extensions to build panels (projects, subscribers, tokens).
- The panel extension code and rendering can be changed without breaking old stuff.
Minor changes:
- Token awards now load their tokens, for consistency/simplicity.
- Removed the rest of the "fork of" / "forked from" UI in Paste -- I essentially removed these features a while ago, and no one has complained.
Test Plan:
UI is a bit rough, but works, and it's going to get changed now anyway:
{F1160550}
{F1160551}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15414
Summary:
Two minor changes here:
- Replace `get/setUser()` with `get/setViewer()` for consistency with everything else.
- `getViewer()` now throws if no viewer is set. We had a lot of code that either "should" check this but didn't, or did check it in an identical way, duplicating work. In contrast, very little code checks for a viewer but works if one is not present.
Test Plan:
- Grepped for `->user`.
- Attempted to fix all callsites inside `*View` classes.
- Browsed around a bunch of applications, particularly Calendar, Differential and Diffusion, which seemed most heavily affected.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15412
Summary:
Every caller returns `true`. This was added a long time ago for Projects, but projects are no longer subscribable.
I don't anticipate needing this in the future.
Test Plan: Grepped for this method.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15409
Summary: Clean up owners a bit, move to two columns.
Test Plan:
Review a package, edit paths, remove all paths. Archive.
{F1139351}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15388
Summary:
Fixes T10519. Two issues:
First, the acting user wasn't explicitly included in the mail. This usually didn't matter, but could matter if you unsubscribed and then interacted.
Second, we had some logic which tried to hide redundant "added inline comment" transactions, but could hide them inappropriately. In particular, if another action (like a subscribe) was present in the same group, we could hide the inlines because of that other transaction, then //also// hide the subscribe. This particular issue is likely an unintended consequence of hiding self-subscribes.
Instead of hiding inlines if //anything else// happened, hide them only if:
- there is another "added a comment" transaction; or
- there is another "added an inline comment" transaction.
This prevents the root issue in T10519 (incorrectly hiding every transaction, and thus not sending the mail) and should generally make behavior a little more consistent and future-proof.
Test Plan:
- Submitted //only// an inline comment on a commit I had not previously interacted with.
- Before patch: no mail was generated (entire mail was improperly hidden).
- After patch: got some mail with my comment.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10519
Differential Revision: https://secure.phabricator.com/D15407
Summary: Sets a header icon, makes "Details" not show if empty, simplifies title.
Test Plan: Review a few Macro pages for changes with and without audio.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15406
Summary: Converts the meta applications application view layout to two column
Test Plan: click through "Configure" on each application, set up some emails. uninstall Phrequent
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15405
Summary: Moves over to the new layout. Fixes T10521
Test Plan: Make a binding, view page, add some properties.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10521
Differential Revision: https://secure.phabricator.com/D15404
Summary: Switch to new method.
Test Plan: Hover over task, see tag in correct place.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15403
Summary: Gives a bit more flexibility to add anything to the right side of PHUIHeaderView.
Test Plan: Test Maniphest, Workboards, Project Home, Differential. Grep for `addActionIcon` use. Fixes T10518
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10518
Differential Revision: https://secure.phabricator.com/D15402
Summary: Reworks Maniphest into a two column view. Moves priority and color to header, assignee to sidebar. quest points to header, and author to gutter. may be some confusion since priority only displays on open tickets.
Test Plan: with and without description, custom fields, points, tablet, mobile and desktop.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15396
Summary:
Ref T10246. Drydock still has a few outstanding issues, but it's mostly minor UI stuff and the documentation has reasonable caveats about it.
Broadly, I don't expect to make any major changes to Drydock in the future (i.e., all the fundamentals seem sound at this point) and it doesn't have any major technical debt or, like, obsolete APIs or anything.
Test Plan: Saw "Drydock" as not-a-prototype in Applications.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10246
Differential Revision: https://secure.phabricator.com/D15401
Summary: Fixes T10449. Almanac doesn't do a whole lot for the average user, but is in good shape technically and works well, and exposing it in the cluster won't let installs destroy themselves now.
Test Plan: Re-read documentation; grepped for `TODO` (there are a couple, but reasonable to push off); browsed around all the UI things (new two-column looks great), called API methods.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10449
Differential Revision: https://secure.phabricator.com/D15400
Summary: Ref T10449. Modernize the AlmanacDevice code a bit.
Test Plan:
- Created a device.
- Edited a device.
- Listed devices.
- Viewed a device.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10449
Differential Revision: https://secure.phabricator.com/D15399
Summary: Ref T10449. This modernizes the service creation/editing flow and updates the list view code a little bit.
Test Plan:
- Created a service.
- Edited a service.
- Browsed services.
- Hit policy exception for editing cluster services with no permission.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10449
Differential Revision: https://secure.phabricator.com/D15398
Summary: Fix an issue where you've already answered, moved the summary section.
Test Plan: Review an answer with a wiki that i've already answered
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15395
Summary: Ref T10457. Use modern controller and UI tech to build the list view and actions.
Test Plan:
- Viewed operation list.
- Viewed operation detail.
- Checked menus on mobile.
{F1139757}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10457
Differential Revision: https://secure.phabricator.com/D15393
Summary:
Ref T10457.
- Let blueprints be tagged so you can search and annotate them a little more easily.
- Give each blueprint type an optional icon to make things a little easier to parse visually.
Test Plan:
- Tagged blueprints.
- Searched by tags.
- Looked at nice little icons.
{F1139712}
Reviewers: chad
Reviewed By: chad
Subscribers: yelirekim
Maniphest Tasks: T10457
Differential Revision: https://secure.phabricator.com/D15392
Summary:
Ref T10457. Fixes T10024. This primarily just modernizes blueprints to use EditEngine.
This also fixes T10024, which was an issue with stored properties not being flagged correctly.
Also slightly improves typeaheads for blueprints (more information, disabled state).
Test Plan:
- Created and edited various types of blueprints.
- Set and removed limits.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10024, T10457
Differential Revision: https://secure.phabricator.com/D15390
Summary:
Ref T10457. The ngram indexing seems to be working well; extend it into Drydock.
Also clean up the list controller a little bit.
Test Plan:
- Ran migrations.
- Searched for blueprints by name.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10457
Differential Revision: https://secure.phabricator.com/D15389
Summary: I kinda like these to differentiate the headers and different object types. Somethings duplicitive, but helps orient the clean header a bit.
Test Plan: Review each in sandbox.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15394
Summary: Fixes T10474. This had the same root cause as T10024 -- a missing call to `didSetValueFromStorage()` because of the way the fields work.
Test Plan:
- Edited a text panel before change, without changing text: got silly transaction.
- Made change, edited text panel without changing text, no transaction.
- Made a real edit, got a good transaction.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10474
Differential Revision: https://secure.phabricator.com/D15391
Summary: Fixes T10504. The "Create Blog" buttons weren't generated by EditEngine, but should be, so that the UI and policies are in sync.
Test Plan:
- Viewed blog list as user with and without permission to create blogs. Saw correct button state.
- Tried to create blogs, saw correct result.
- Viewed empty state of home, clicked "New Blog" buttons.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10504
Differential Revision: https://secure.phabricator.com/D15384
Summary: Updates the Fund application to use a two column layout
Test Plan: Make an initiative.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15383
Summary: Simplifies building pages a little more, adds a helper method to just add a property section to the main column automatically above other content.
Test Plan: Review Ponder, Herald, Passphrase, Countdown.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15377
Summary: Updates Almanac to the new layout, adds some header icons for interest.
Test Plan: Click on all the different almanac pages.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15381
Summary:
Ref T5822.
- After a log is closed, compress it if possible.
- Provide `bin/harbormaster archive-logs` to make it easier to change the storage format of logs.
Test Plan:
- Ran `bin/harbormaster archive-logs` on a bunch of logs, compressing and decompressing them without issues (same hashes, same decompressed size across multiple iterations).
- Ran new builds, verified logs were compressed after they closed.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5822
Differential Revision: https://secure.phabricator.com/D15380
Summary: Ref T5822. This will make it easier to compress and archive chunks without needing to hold them in memory.
Test Plan: Ran a build, looked at some logs.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5822
Differential Revision: https://secure.phabricator.com/D15378
Summary:
Ref T10457. Currently, this table is an ad-hoc table, but can easily be turned into a normal table.
This will make iterating over log chunks to compress and archive them easier.
Test Plan: Viewed logs, ran `bin/storage adjust` with no issues.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10457
Differential Revision: https://secure.phabricator.com/D15376
Summary:
Ref T10457. Currently, every `append()` call necessarily generates queries, and these queries are slightly inefficient if a large block of data is appended to a partial log (they do about twice as much work as they technically need to).
Use `PhutilRope` to buffer `append()` input so the logic is a little cleaner and we could add a rule like "flush logs no more than once every 500ms" later.
Test Plan:
- Ran a build, saw logs.
- Set chunk size very small, ran build, saw logs, verified small logs in database.
{F1137115}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10457
Differential Revision: https://secure.phabricator.com/D15375
Summary:
Ref T5822. This prepares for inline compression and garbage collection of build logs.
This reduces the API surface area and removes a log from the "wait" step that would just log a message every 15 seconds. (If this is actually useful, I think we find a better way to communicate it.)
Test Plan:
Ran a build, saw a log:
{F1136691}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5822
Differential Revision: https://secure.phabricator.com/D15371
Summary:
Rolls out a new "Object Page" design with PHUITwoColumnView. This is reasonably polished, but wanted to post it up for you now for feedback before chasing down minor bugs. This implements TwoColumn in the following applications:
- Ponder
- Paste
- Slowvote
- Countdown
- Projects
- Profile
- Passphrase
This helped track down display issues and inconsistencies and make sure the layout was flexible for different pages.
Test Plan:
Test each of the applications on mobile, tablet, and desktop breakpoints.
{F1135705}
{F1135706}
{F1135707}
{F1135708}
{F1135709}
{F1135710}
{F1135711}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15366
Summary:
Ref T10457. Skipped tests are almost always well-behaved (e.g., `testWindows()`, but the test is running on Linux) and not interesting, and we do not expect well-written, solid systems to necessarily have 0 skips.
Although skips //could// indicate that you have missing dependencies on a build server, and thus be a bit interesting, I think they almost always indicate that a particular test is not expected to run in the current environment.
If we wanted to tackle this problem in granular detail, we could eventually add a "Missing" status or similar which would serve as "a skip you //could// reasonably fix in this environment", but I don't think that's too interesting.
Test Plan:
Here's an example of a build result with skips: B10875
{F1136511}
I think this is clearer as "Passed", as this is the expected production state of the build.
Locally, looked at some builds.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10457
Differential Revision: https://secure.phabricator.com/D15369
Summary: Fixes T10478.
Test Plan: Paged projects by "Created" without errors.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10478
Differential Revision: https://secure.phabricator.com/D15367
Summary: Ref T10457. This gives unit test results a more first-class treatment in the Differential UI, and consolidates some rendering code.
Test Plan:
Before:
{F1135536}
After:
{F1135537}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10457
Differential Revision: https://secure.phabricator.com/D15365
Summary:
Ref T10457. When tests fail, it currently takes several clicks to figure out //why// they failed.
In this project, map rebuilds and `liberate` are fairly common failure conditions, but verifying that they were the root issue requires jumping into a build, then scrolling through a log.
Instead, display details if they're available.
Test Plan:
Before:
{F1135453}
After:
{F1135454}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9951, T10457
Differential Revision: https://secure.phabricator.com/D15363
Summary: Ref T10457. These lack color and iconography and are difficult to parse. Make them easier to read.
Test Plan:
Before:
{F1135396}
After:
{F1135399}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10457
Differential Revision: https://secure.phabricator.com/D15362
Summary: Ref T10457. This is mostly just for consitency, but I imagine it will make managing large/complex build processes easier, and if we support Herald rules it would eventually let you write "Build plan's tags include [whatever]" to apply behavior to a group of plans.
Test Plan: {F1133107}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10457
Differential Revision: https://secure.phabricator.com/D15360
Summary: Ref T10457. Allow build plans to be queried by name.
Test Plan:
- Searched for plans by name.
- Renamed a plan, searched for new name.
{F1133085}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10457
Differential Revision: https://secure.phabricator.com/D15359
Summary:
Fixes T10466. Currently, clicking "Disable Mail" or "Enable Mail" on a project toggles an edge, but it gets a default "added an edge" story and transaction record.
These are confusing, useless and not interesting, so just hide them.
Test Plan:
- Before patch: clicked enable/disable mail, saw "added an edge" / "removed an edge" stories in feed and project history.
- After patch: clicked enable/disable mail, saw nothing in feed or project history.
- (Note that this patch is not retroactive for feed, so already-published stories won't unpublish.)
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10466
Differential Revision: https://secure.phabricator.com/D15361
Summary:
Ref T10457.
- Use EditEngine for Build Plans.
- Fix some minor issues with crumbs being inconsistent.
- Fix some minor issues with mobile menus not being consistent/available.
Test Plan:
- Created and edited build plans.
- Poked around in mobile width, verified mobile menu had the right stuff in it.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10457
Differential Revision: https://secure.phabricator.com/D15357
Summary:
Fixes T10011.
- Modernize searching for buildables.
- Prepare for `harbormaster.buildable.search`.
- Allow users to query by status (see T10011).
- Collapse the four weird "commit / diff / revision / repository" fields into two slightly less weird fields with more UI hinting?
Test Plan: {F1131918}
Reviewers: chad
Reviewed By: chad
Subscribers: Luke081515.2
Maniphest Tasks: T10011
Differential Revision: https://secure.phabricator.com/D15356
Summary:
Ref T10457. This makes diffs/revisions show the revision as the buildable title, and commits show the commit as the title.
Previously, the title was "Buildable X".
Also makes icons/colors/labels more consitent.
Test Plan: {F1131885}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10457
Differential Revision: https://secure.phabricator.com/D15355
Summary:
Ref T10457. We currently have these weird, out-of-place methods on Harbormaster queries that just load handles. These were written before HandlePool, and HandlePool is now more convenient, simpler, and more efficient.
Drop this stuff in favor of using handle pools off `$viewer`.
Test Plan: Looked at buildable list, looked at buildable detail, grepped for removed methods.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10457
Differential Revision: https://secure.phabricator.com/D15354
Summary: Fixes T9614. This is kind of silly, but stop users from fighting turf wars over build resources or showing up on an install and just aborting a bunch of builds for the heck of it.
Test Plan:
- Restarted / paused / aborted / etc builds.
- Tried to do the same for builds I didn't have edit permission on the build plan for, got errors.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9614
Differential Revision: https://secure.phabricator.com/D15353
Summary: Fixes T10458. These steps are obsolete and have not worked since the last updates to Drydock. They may eventually return in some form, but get rid of them for now since they're confusing.
Test Plan:
- Created a build plan with these steps.
- Removed these steps.
- Verified the build plan showed that the steps were invalid, and that I could delete them.
- Deleted them.
- Added new steps, no obsolete steps were available for selection.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10458
Differential Revision: https://secure.phabricator.com/D15352
Summary:
Ref T10449. Currently, we store classes (like "AlmanacClusterRepositoryServiceType") in the database.
Instead, store types (like "cluster.repository").
This is a small change, but types are a little more flexible (they let us freely reanme classes), a little cleaner (fewer magic strings in the codebase), and a little better for API usage (they're more human readable).
Make this minor usability change now, before we unprototype.
Also make services searchable by type.
Also remove old Almanac API endpoints.
Test Plan:
- Ran migration, verified all data migrated properly.
- Created, edited, rebound, and changed properties of services.
- Searched for services by service type.
- Reviewed available Conduit methods.
Reviewers: chad
Reviewed By: chad
Subscribers: yelirekim
Maniphest Tasks: T10449
Differential Revision: https://secure.phabricator.com/D15346
Summary:
Fixes T9762. Ref T10246.
**Disabling Bindings**: Previously, there was no formal way to disable bindings. The internal callers sometimes check some informal property on the binding, but this is a common need and deserves first-class support in the UI. Allow bindings to be disabled.
**Deleting Interfaces**: Previously, you could not delete interfaces. Now, you can delete unused interfaces.
Also some minor cleanup and slightly less mysterious documentation.
Test Plan: Disabled bindings and deleted interfaces.
Reviewers: chad
Reviewed By: chad
Subscribers: yelirekim
Maniphest Tasks: T9762, T10246
Differential Revision: https://secure.phabricator.com/D15345
Summary:
Fixes T6741. Ref T10246. Broadly, we want to protect Almanac cluster services:
- Today, against users in the Phacility cluster accidentally breaking their own instances.
- In the future, against attackers compromising administrative accounts and adding a new "cluster database" which points at hardware they control.
The way this works right now is really complicated: there's a global "can create cluster services" setting, and then separate per-service and per-device locks.
Instead, change "Can Create Cluster Services" into "Can Manage Cluster Services". Require this permission (in addition to normal permissions) to edit or create any cluster service.
This permission can be locked to "No One" via config (as we do in the Phacility cluster) so we only need this one simple setting.
There's also zero reason to individually lock //some// of the cluster services.
Also improve extended policy errors.
The UI here is still a little heavy-handed, but should be good enough for the moment.
Test Plan:
- Ran migrations.
- Verified that cluster services and bindings reported that they belonged to the cluster.
- Edited a cluster binding.
- Verified that the bound device was marked as a cluster device
- Moved a cluster binding, verified the old device was unmarked as a cluster device.
- Tried to edit a cluster device as an unprivileged user, got a sensible error.
{F1126552}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6741, T10246
Differential Revision: https://secure.phabricator.com/D15339
Summary: Evidently I only tested adding a question, not an answer. Properly set the getter. Also, fixed some header spacing.
Test Plan: Add a question, add an answer. See everything work, proper spacing.
Reviewers: epriestley, avivey
Reviewed By: avivey
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15341
Summary: Full new UI, testing some upcoming treatments for consideration in other View controllers. Small tweaks to allow PHUITwoColumnView to have fixed and fluid width, and let TransactionCommentView go fullWidth.
Test Plan:
Tested a number of Ponder cases, New Question, with and without summary, with and without answers, with and without comments. Mobile, Tablet, and Desktop layouts. Verify Project and Profile UI's still in tact.
{F1120961}
{F1120962}
{F1120963}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15315
Summary:
Ref T10349.
- Don't show subproject columns on "Manage Board".
- Fix "Edit Column" for milestone columns (allows you to set points, but not rename).
Test Plan:
- Viewed "Manage Board" on a project with subprojects.
- Edited a milestone column and set a point limit.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10349
Differential Revision: https://secure.phabricator.com/D15338
Summary: Fixes T10432. I missed these in making properties non-default.
Test Plan: Diffusion now works again in a cluster configuration.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10432
Differential Revision: https://secure.phabricator.com/D15337
Summary: Fixes T10413. I accidentally hid these //everywhere//, but only intended to hide them on workboards.
Test Plan:
- Viewed a workboard, saw un-archived projects only.
- Viewed a task detail page, saw archived and un-archived projects.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10413
Differential Revision: https://secure.phabricator.com/D15335
Summary:
Fixes T10414. I think this sorted by name at one time (the `asort()`) but then I probably added "Space SX" in front of it. Or I just got this wrong from the beginning.
Instead, sort by space name.
Test Plan: {F1126034}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10414
Differential Revision: https://secure.phabricator.com/D15334
Summary:
Fixes T10426. When the owner of a task changes, we try to add the old owner to CC so they're kept in the loop.
Currently, we do this unconditionally. This can add the owner as a subscriber when someone didn't change anything, which is confusing.
Instead, only do this if the owner actually changed.
Test Plan:
- With "A" as owner, edited task and saved.
- Before patch, A was added as subscriber.
- After patch, A not added.
- With "A" as owner, changed owner to "B" and saved.
- Both before and after patch, "A" is added as a subscriber.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10426
Differential Revision: https://secure.phabricator.com/D15333
Summary: Fixes T10411. Ref T10246. There are probably still some rough edges with this, but replace the old-school endpoints with modern ones so we don't unprototype with deprecated stuff.
Test Plan:
- Made a bunch of calls to the new endpoints with various constraints/attachments.
- Created and edited services, devices, interfaces, bindings, and properties on everything.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10246, T10411
Differential Revision: https://secure.phabricator.com/D15329
Summary: Fixes T10409. Long term need to build a proper "PageEngine" of sorts for layouts not needing special magic. For now this just affects a few applications.
Test Plan: View Diffusion, Phriction, Phame, Legalpad, Diviner.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10409
Differential Revision: https://secure.phabricator.com/D15328
Summary:
Ref T10411. This cleans up / modernizes things and lets me get an `almanac.network.edit` API in the future.
This is mostly straightforward, except that Services have an extra "choose type" screen in front of them.
Test Plan:
- Created and edited Almanac networks, services, and devices.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10411
Differential Revision: https://secure.phabricator.com/D15326
Summary:
Fixes T10410. Immediate impact of this is that you can now actually delete properties from Almanac services, devices and bindings.
The meat of the change is switching from CustomField to EditEngine for most of the actual editing logic. CustomField creates a lot of problems with using EditEngine for everything else (D15326), and weird, hard-to-resolve bugs like this one (not being able to delete stuff).
Using EditEngine to do this stuff instead seems like it works out much better -- I did this in ProfilePanel first and am happy with how it looks.
This also makes the internal storage for properties JSON instead of raw text.
Test Plan:
- Created, edited and deleted properties on services, devices and bindings.
- Edited and reset builtin properties on repository services.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10410
Differential Revision: https://secure.phabricator.com/D15327
Summary:
Ref T10246. Ref T6741.
When you have a namespace like "phacility.net", require users creating services and devices within it to have edit permission on the namespace.
This primarily allows us to lock down future device names in the cluster, so instances can't break themselves once they get access to Almanac.
Test Plan:
- Configured a `phacility.net` namespace, locked myself out of it.
- Could not create new `stuff.phacility.net` services/devices.
- Could still edit existing devices I had permission for.
- Configured a `free.phacility.net` namespace with more liberal policies.
- Could create `me.free.phacility.net`.
- Still could not create `other.phacility.net`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6741, T10246
Differential Revision: https://secure.phabricator.com/D15325
Summary:
Ref T6741. Ref T10246.
Root problem: to provide Drydock in the cluster, we need to expose Almanac, and doing so would let users accidentally or intentionally create a bunch of `repo006.phacility.net` devices/services which could conflict with the real ones we manage.
There's currently no way to say "you can't create anything named `*.blah.net`". This adds "namespaces", which let you do that (well, not yet, but they will after the next diff).
After the next diff, if you try to create `repo003.phacility.net`, but the namespace `phacility.net` already exists and you don't have permission to edit it, you'll be asked to choose a different name.
Also various modernizations and some new docs.
Test Plan:
- Created cool namespaces like `this.computer`.
- Almanac namespaces don't actually enforce policies yet.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6741, T10246
Differential Revision: https://secure.phabricator.com/D15324
Summary: Ref T6741. Ref T10246. This is largely modernization, but will partially support namespace locking in Almanac.
Test Plan:
Searched for Almanac networks by name substring.
{F1121740}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6741, T10246
Differential Revision: https://secure.phabricator.com/D15322
Summary: Ref T10246. Build an ngram index for Almanac services, and use it to support improved search.
Test Plan: {F1121725}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10246
Differential Revision: https://secure.phabricator.com/D15321
Summary:
These trip me up every time because Differential has:
> Comment, Accept, Request Changes, Resign, Commandeer, Add Reviewers, Add Subscribers
while audits currently show:
> Comment, Add Subscribers, Add Auditors, Accept, Raise Concern, Resign
Now they're more or less in the same order which helps with muscle memory.
Test Plan: Careful inspection.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15323
Summary:
Fixes T10205. Ref T10246. Previously, the issue was that the result set was not ordered, so "More Results" would not have been able to work in a reasonable way if there were more than 100 matching interfaces.
You would have seen 100 interfaces more or less at random, then clicked "more" and gotten 100 more random interfaces.
Now, you would see 100 "a" interfaces, then click more to get the next 100 alphabetical interfaces (say, "b" and "c" interfaces).
Test Plan:
- Clicked browse when binding an interface.
- Got a browse dialog.
- Artificially set query limit to 1, paged through "local" interfaces in an ordered, consistent way.
{F1121313}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10205, T10246
Differential Revision: https://secure.phabricator.com/D15320
Summary:
Ref T10205. Ref T10246. This is general modernization, but also supports fixing the interface datasource in T10205.
- Update Query.
- Update SearchEngine.
- Use an ngrams index for searching names efficiently.
Test Plan:
- Ran migrations.
- Searched Almanac devices by name.
- Created a new device, searched for it by name.
{F1121303}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10205, T10246
Differential Revision: https://secure.phabricator.com/D15319
Summary: Not terribly useful. Also removed close your stuff reminder.
Test Plan: View question I asked and strangers question. Both layout more normal like.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15312
Summary: Ref T10394. Currently, these rules are only active if the Macro application is installed. Instead, install them unconditionally.
Test Plan:
- Used `{icon camera}` with Macro installed and uninstalled.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10394
Differential Revision: https://secure.phabricator.com/D15311
Summary: Swapping out to PHUIDocumentProView to remove all calls to PHUIDocumentView.
Test Plan: Review the Phabricator Readme.MD in Diffusion
Reviewers: epriestley, avivey
Reviewed By: avivey
Subscribers: avivey, Korvin
Differential Revision: https://secure.phabricator.com/D15308
Summary:
WMF ran into this after their update. Here's the setup:
- When you enable Spaces, we leave all existing objects set to `null`, which means "these belong to the default space". This is so we don't have to go update a trillion objects.
- New objects get set to the default space explicitly (`PHID-SPCE-...`) but older ones stay with `null`.
- If you edit an older object (like a task) from the time before Spaces, //and// the form doesn't have a Visbility/Spaces control, we would incorrectly poplate the value with `null` when the effective value should be the default space PHID.
- This caused a "You must choose a space." error in the UI.
Instead, populate the control with the effective value instead of the literal database value. This makes the edit go through cleanly.
Also add a note about this for future-me.
Test Plan:
- Disabled "Visibility" control in task edit form.
- Edited an old task which had `null` as a `spacePHID` in the database.
- Before patch: UI error about selecting a Space.
- After patch: edit goes through cleanly.
Reviewers: chad, 20after4
Reviewed By: chad, 20after4
Subscribers: 20after4, aklapper
Differential Revision: https://secure.phabricator.com/D15306
Summary:
Ref T4245. This could still use a little UI smoothing, but:
- Don't require a callsign on the create flow (you can add one later in "Edit Basic Information" if you want).
- Allow existing callsigns to be removed.
Test Plan:
- Created a new repository with no callsign.
- Cloned it; pushed to it.
- Browsed around Diffusion a bunch.
- Visited a commit URI.
- Added a callsign to it.
- Removed the callsign again.
- Referenced it with `R22` in remarkup.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D15305
Summary:
Ref T4245. This is a prelude to removing them from the "create" screen.
Currently, if you try to delete the callsign you get an unceremonious database error, but the next diff (or maybe two) will permit that, so I didn't put any "this is required yada yada" text in.
This could also maybe use some big flashing warning lights and a "if you edit this, all your URIs break" but I'll save that for later.
Test Plan: Changed the callsign for a repository.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D15304
Summary: Ref T4245. When creating new repositories, set a default local path based on the repository ID instead of callsign.
Test Plan:
- Created a new repository.
- Saw it get a reasonable, ID-based local path.
- Edited a repository to make sure the `applyFinalEffects()` wasn't doing anything whacky.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D15303
Summary: Ref T4245. Consolidates the URI parsing/rewriting logic so that repositories can be served from either `/diffusion/XYZ/` or `/diffusion/123/`, over both HTTP and SSH.
Test Plan:
- Pulled a Git repository by ID and callsign over HTTP and SSH.
- Pulled a Mercurial repository by ID and callsign over HTTP and SSH.
- Pulled a Subversion repository by ID and callsign over SSH (no HTTP support for SVN).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D15302
Summary:
Ref T4245. Make `/diffusion/123/` work, but redirect the user to `/diffusion/XYZ/` if the repository has a callsign.
(Right now, every repository has a callsign, so this always redirects.)
Also redirect `/R123:abcdef` if the repository has a callsign.
Also also, move the Pull garbage collector somewhere more sensible.
Test Plan:
- Added test coverage.
- Visited `/diffusion/1/`, was redirected.
- Visited `/diffusion/R1:abcdef`, was redirected.
- Browsed Diffusion normally.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D15301
Summary: Ref T10349.
Test Plan:
- Added archived and unarchived project tags to a task.
- Saw unarchived tags, only, on cards.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10349
Differential Revision: https://secure.phabricator.com/D15297
Summary: Ref T4245. This currently accepts only callsigns; prepare it for the bright new callsign-optional world.
Test Plan:
- Ran `./bin/diviner generate --repository 1 --book src/docs/book/flavor.book --clean`, got a good result.
- Ran `./bin/diviner generate --repository 239238 --book src/docs/book/flavor.book --clean`, got an appropraite error about a bad repository identifier.
Reviewers: chad, avivey
Reviewed By: avivey
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D15296
Summary: Ref T4245. This has no callers.
Test Plan:
- Ran `git grep -i 'getCallsign('` and visually verified that no callers could reasonably be `DiffusionRequest` objects (there are only 23 remaining sites, and about half are `$this->...` in `PhabricatorRepository`.
- Browsed around directory/file/branch/content/diff/etc pages in Diffusion.
Reviewers: chad, avivey
Reviewed By: avivey
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D15295
Summary:
Ref T4245. We pass this exclusively for use by additional third-party hooks.
This is technically a backward compatibility break, but I suspect it doesn't affect anyone:
- Probably almost no one is using this (there are few reasons to, even for the tiny number of installs with custom commit hooks).
- If they are, there's a good chance the PHID will work anyway, since nearly all scripts and Conduit methods will accept it in place of a callsign now, and if it's in logging or debugging code the PHID is a reasonable substitute
- Even if it doesn't just keep working, the break should be very obvious in most reasonable cases.
I'll call this out explicitly in the changelog, though -- almost everything else will just continue working, but this is a strict compatibility break.
Test Plan:
- Ugh.
- Picked a hosted Git repo out of Diffusion.
- Went to the path on disk.
- Went into `hooks/`.
- Went into `pre-receive-phabricator.d/`.
- Wrote this hook and gave it `chmod +x`:
```name=stuff.sh
#!/bin/sh
echo $PHABRICATOR_REPOSITORY >> /tmp/stuff.log
```
- Pushed to the repository.
- Saw a PHID show up in the log:
```
$ cat /tmp/stuff.log
PHID-REPO-bqkcdp47euwnwlasrsrh
```
Reviewers: chad, avivey
Reviewed By: avivey
Subscribers: avivey
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D15294
Summary:
Ref T4245. Two effects:
- First, let hooks work for future repositories without callsigns.
- Second, provide a better error when users push directly to hosted repositories.
Test Plan: Ran `bin/commit-hook PHID-REPO-xxx`.
Reviewers: chad, avivey
Reviewed By: avivey
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D15293
Summary: Working towards making PHUITwoColumnView into a page layout engine. Adds header support.
Test Plan: Use new header on Profile and Profiles. No visual changes, less duplicated code.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15292
Summary: Attempting to clean PHUIObjectBoxView up a little as well as finally being able to `addClass` on the sucker. I'm running into some issue with `addTabs` though, which on Files isn't firing.
Test Plan: Bounce around tons of screens.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15291
Summary:
Ref T10349. This capability didn't make a ton of sense when you had to be a member to watch a project and watch rules were simple, but makes more sense now.
A particular use case might be finding all the stuff you're watching so you can prune it.
Test Plan: Searched for stuff I was watching, got accurate results.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10349
Differential Revision: https://secure.phabricator.com/D15289
Summary: We're using this a little more, so I'd prefer less copy-pasta and one place to manage the UI. Maybe add a caret?
Test Plan: grep for 'Actions', test Phriction, Diviner, ect, Action Menus.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15288
Summary: Fixes T9562. We already do this for tags, but didn't have similar logic for branches. Implement that logic.
Test Plan:
- Set limit to 1, saw "More branches", clicked it, got the correct results.
- Verified that branch table with no specified commit still works properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9562
Differential Revision: https://secure.phabricator.com/D15284
Summary: Uses the background color changes to show also on the side nav. Places color on entire body so fullscreen doesn't show other body color.
Test Plan: Review various workboard colors at normal and fullscreen
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15283
Summary:
Fixes T10304. In Mercurial, we must enumerate the whole file tree. Currently, we incorrectly count files within directories (which won't be shown) toward the "100 file" limit at top level, so directories with more than 100 subpaths are truncated improperly.
This is approxiately the same as @richardvanvelzen's fix.
Test Plan: Viewed a large Mercurial repository, saw a complete directory listing.
Reviewers: chad
Reviewed By: chad
Subscribers: richardvanvelzen
Maniphest Tasks: T10304
Differential Revision: https://secure.phabricator.com/D15282
Summary: Moves all the one off object calls to PHUIRemarkupView, adds a "Document" call as well (future plans).
Test Plan: Visited most pages I could get access to, but may want extra careful eyes on this diff.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15281
Summary:
Ref T10349. These got sort of half-weirded-up before I separated subscriptions and watching fully. New rules are:
- You can watch whatever you want.
- Watching a parent watches everything inside it.
- If you're watching "Stonework" and go to "Stonework > Masonry", you'll see a "Watching Ancestor" hint to let you know you're already watching a parent or ancestor.
Test Plan:
- Watched and unwatched "Stonework".
- Watched and unwatched "Stonework > Iteration IV".
- While watching "Stonework", visited "Iteration IV" and saw "Watching Ancestor" hint.
- Created a task tagged "Stonework > Iteration IV". Got notified about it because I watch "Stonework".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10349
Differential Revision: https://secure.phabricator.com/D15280
Summary: Should make it simpler here to have more `rgba` rules in CSS for things like hovers, selected states. Maybe only use `rgb` colors? Color pallette probably needs an overhaul.
Test Plan: Bounce around random pages, buttons, menus. Everything appears normal.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15273
Summary:
Adds a UI for selecting background colors.
You can choose "Use Parent", which is the default, and allows you to set a color that all descendants inherit.
You can also choose "None", if a parent has a WHACKY BACKGROUND that you refuse to put up with.
Test Plan:
{F1114588}
{F1114589}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15279
Summary:
This gives us room for less-common workboard management options like "Disable Board" without overloading the menus on the main board.
Particularly, we can add background color options here without anything getting weird.
I've left "Add Column" on the main UI since I think it's common enough to leave there. We could probably move "Hide Column" to this UI in the future, though.
Test Plan: {F1114475}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15278
Summary:
Ref T10349. At HEAD, if you create a task //on a board//, it floats to the top correctly.
If you create a task elsewhere and tag it with the board, you were subject to the whims of the layout engine and it would generally end up on the bottom.
Instead, make the rules consistent so that "virtual" positions (of tasks which haven't been committed to a particular position yet) still float to the top.
Test Plan:
- Created tasks from a board.
- Created tasks from Maniphest, then looked at them on a board.
- Moved tasks around.
- In all cases, newly created tasks floated to the top.
- Sorted by natural and priority.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10349
Differential Revision: https://secure.phabricator.com/D15276
Summary: Fixes T10361.
Test Plan:
- Created a poll with an embedded file and a mention of a task.
- Verified file was attached properly.
- Verified mention appeared on task.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10361
Differential Revision: https://secure.phabricator.com/D15277
Summary: Fixes T10360. In modern code, most of the meat is automatic.
Test Plan:
- Edited view policy and edit policy from web UI.
- Viewed package, saw policy badge in header.
- Tried to edit a package as a user without permission, got appropriate disabled states and errors.
- Changed policies via Conduit.
- Tried to view a package as a user without permission.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10360
Differential Revision: https://secure.phabricator.com/D15275
Summary:
Fixes T10357.
- Show a better (more descriptive) error message when a user who can't create projects tries to create a subproject or milestone.
- Disable the subproject actions if you don't have create permission.
All this stuff was already enforced properly: this diff doesn't make any actual policy changes, just improves the UI for users who lack permission.
Test Plan:
- As an unprivileged user (no "Can Create Projects"), tried to create a subproject or milestone.
- After patch, got a disabled action, with more specific and helpful error than before.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10357
Differential Revision: https://secure.phabricator.com/D15274
Summary: Makes these pages a dialog endpoint, keeping you on the Workboard when possible.
Test Plan: Create a Column, Edit a Column, visit hard page. Test letters in the points field.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15270
Summary: Cleans up the backgrounds a little on Projects/Profiles and adds a number of colour choices for Workboards.
Test Plan:
Manually add each color for testing. Test new project / profile layouts with and without properties.
{F1109325}
{F1109326}
{F1109327}
{F1109328}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15269
Summary:
Ref T10349. Columns have the same policies as the projects they belong to.
However, the current implementation just returns the policy directly. This usually works, but if the project has a policy like "Members of (This) Project", the policy filter tries to check if the viewer is a member of //the column itself//. That doesn't work, since columns don't have members. This leads to a situation where columns on "Editable By: Project Members" projects can not be edited.
Instead, return a permissive base policy and then use an extended policy to bind the column policy to the project policy.
Test Plan:
- Edited a column on an "Editable By: Members of Project" board.
- Added and ran a unit test covering this case.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10349
Differential Revision: https://secure.phabricator.com/D15268
Summary:
Ref T10349. Instead of showing columns in "Backlog, Custom, Sprint 1, Sprint 2, Sprint 3" order, show the sprints in reverse order: 3, 2, 1.
This makes it easier to get to the new stuff, and you don't have to drag over older stuff or archive it immediately.
Trello's own meta-board for Trello development is a good example of this in the wild: older stuff goes out to the right, so you can get to the newer stuff easily:
https://trello.com/b/nC8QJJoZ/trello-development
Test Plan: Saw board in 3, 2, 1 order instead of 1, 2, 3.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10349
Differential Revision: https://secure.phabricator.com/D15267
Summary: Ref T10350. Normally, milestone numbers and IDs have the same order, but they may not if you used the script in T10350 to artificially move a bunch of stuff around.
Test Plan: Milestones now go "1, 2, <thing I artifically moved into position 3>" on local install.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10350
Differential Revision: https://secure.phabricator.com/D15266
Summary:
Fixes T10346. You finally wrung a clue out of the reporter and I think I figured this out.
Here's the bug:
- Create a project with a workboard and subprojects/milestones.
- Create a new project, import columns from the first project.
- We incorrectly import empty columns for the subprojects/milestons.
Instead, skip proxy columns during import.
Also, allow "hide column" to continue on missing fields, so columns with no name can be hidden.
Test Plan:
- Did the stuff above.
- Workboard no longer populated with a bunch of "Unnamed Column" columns.
- Hid several "Unnamed Column" columns.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10346
Differential Revision: https://secure.phabricator.com/D15265
Summary: This just hides them, should still show on "View All".
Test Plan: Hide a Milestone, no longer see it on home. Click "View All", see all Milestones.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15264
Summary: Fixes T10347. In the long run maybe we'll try to guess this better, but for now get rid of the "Milestone X" hardcode and just show what the last one was called.
Test Plan:
- Created the first milestone for a project.
- Created the nth milestone for a project.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10347
Differential Revision: https://secure.phabricator.com/D15262
Summary:
Fixes T10285.
- If a result (like a milestone) has no primary hashtag, try to fill in a secondary hashtag.
- If we can't find any hashtag, don't return the result.
This produces these behaviors:
- By default, you can't autocomplete milestones.
- If you give one a hashtag, you can.
We might want to give milestones "special" hashtags eventually (like `#xyz/33`) but this fixes the confusing/broken behavior in the UI and we can wait for a better use case for letting you autocomplete milestones, I think.
Also, don't try to cycle hashtags when renaming milestones. This was a little inconsistent before.
Test Plan:
- Autocompleted normal projects.
- Autocompleted milestones with explicit hashtags.
- No autocomplete entry for milestones with no special hashtags.
- Used normal typeahead to get tag-less milestones to make sure I didn't break anything.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10285
Differential Revision: https://secure.phabricator.com/D15261
Summary: Fixes T10310. This replaces the "Hide Column" / "Show Column" option for milestone columns with one that archives/unarchives, and hides milestone columns when the milestone project is archived.
Test Plan:
- Hid and unhid a normal column (got normal dialogs).
- Hid and unhid a milestone column (got "archive project" dialogs, underlying project archived/unarchived, column vanished).
Reviewers: hach-que, #blessed_reviewers, chad
Reviewed By: #blessed_reviewers, chad
Subscribers: jcowgar, Korvin
Maniphest Tasks: T10310
Differential Revision: https://secure.phabricator.com/D15231
Summary:
Fixes T10264. I'm reasonably confident that this is the chain of events here:
First, prior to 8269fd6e, we would ignore "Content-Encoding" when reading inbound bodies. So if a request was gzipped, we would read a gzipped body, then give `git-http-backend` a gzipped body with "Content-Encoding: gzip". Everything matched normally, so that was fine, except in the cluster.
In the cluster, we'd accept "gzip + compressed body" and proxy it, but not tell cURL that it was already compressed. cURL would think it was raw data, so it would arrive on the repository host with a compressed body but no "Content-Encoding: gzip". Then we'd hand it to git in the same form. This caused the issue in 8269fd6e: handing it compressed data, but no "this is compressed" header.
To fix this, I made us decompress the encoding when we read the body, so the cluster now proxies raw data instead of proxying gzipped data. This fixed the issue in the cluster, but created a new issue on non-cluster hosts. The new issue is that we accept "gzip + compressed body" and decompress the body, but then pass the //original// header to `git-http-backend`. So now we have the opposite problem from what we originally had: a "gzip" header, but a raw body.
To fix //this//, we could do two things:
- Revert 8269fd6e, then change the proxy request to preserve "Content-Encoding" instead.
- Stop telling `git-http-backend` that we're handing it compressed data when we're handing it raw data.
I did the latter here because it's an easier change to make and test, we'll need to interact with the raw data later anyway, to implement repository virtualization in connection with T8238.
Test Plan: See T10264 for users confirming this fix.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10264
Differential Revision: https://secure.phabricator.com/D15258
Summary:
This commit adds the `transactionID` field to manphest.gettransactions, to
satisfy the request in T10327
Test Plan: Call the `maniphest.gettransactions` endpoint, verify `transactionID` is present
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: chad, Korvin
Differential Revision: https://secure.phabricator.com/D15250
Summary:
Fixes T6641. This allows users who have permission to edit a project to use "Save as Default" to save the current order and filter as defaults for the project.
These are per-board defaults, and apply to all users. The rationale is that I think the best default ordering/filtering depends mostly on the board, not the viewer.
This seems to align with most requests in the task, although rationale is a bit light. But, for example, it seems reasonable you might want to change the default filter to "All Tasks" on a sprint board, so you can see what's in the "Done" column.
This also fixes some minor issues I ran into:
- Herald could hit an issue while checking permissions if the project was a subproject and a non-member had a triggering rule.
- "Advanced filter..." did not prefill with the current filter.
Test Plan:
- Set default order and filter on a workboard.
- Reloaded board, saw settings stick.
- Tried to edit a board as an unprivileged user (disabled menu items, error).
- Reviewed transaction log.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6641
Differential Revision: https://secure.phabricator.com/D15260
Summary:
Fixes T10343. All solutions here seem basically fine. I think adding this small bit of complexity is OK, and sorrrrt of like this behavior sometimes.
- Allow disabling this behavior per-status.
- Disable it by default for "Invalid" and "Duplicate" (I left "wontfix", since that's a resolution?).
Beyond being more flexible, I think this is slightly better?
Test Plan:
- Closed a task as invalid: no claim.
- Closed a task as resolved: claim.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10343
Differential Revision: https://secure.phabricator.com/D15257
Summary: Ref T4427. Seems fine / not egregiously broken.
Test Plan: Edited points configuration. Tried to set a bad value. Set a good value. Persued examples and help text.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4427
Differential Revision: https://secure.phabricator.com/D15256
Summary: minor spacing updates, but i need to likely take a more details pass, specifically points look janky with project tags since they are not in the same `li`.
Test Plan: Zoom into tags, see they all are same height and align.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15255
Summary: Mimics the Project Hovercards, more custom UI.
Test Plan: Hover over person with and without badges, hover over project.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15253
Summary:
Fixes T10330.
- Anywhere we support "matches regexp", also allow "does not match regexp". Although you can sometimes write a clever negative regexp, these rules are better expressed with "does not match <simple regexp>" anyway, and sometimes no regexp will work.
- Always allow "does not contain" when we support "contains".
- Fix some JS issues with certain rules affecting custom fields.
Test Plan:
- Wrote an "Affected files do not match regexp" rule that required every diff to touch "MANUALCHANGELOG.md".
- Tried to diff without the file; rejected.
- Tried to diff with the file; accepted.
- Wrote a bunch of "contains" and "does not contain" rules against text fields and custom fields, then edited tasks to trigger/observe them.
- Swapped the editor into custom text, user, remarkup, etc fields, no more JS errors.
{F1105172}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10330
Differential Revision: https://secure.phabricator.com/D15254
Summary: Also adds the commit to the header underneath the title. Ref T7628
Test Plan: Review a few Diffusion pages.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T7628
Differential Revision: https://secure.phabricator.com/D15246
Summary: These are not needed I think? and handy for cut and paste. Fixes T7628
Test Plan: cut and paste easier from commit hash.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T7628
Differential Revision: https://secure.phabricator.com/D15245
Summary:
These columns were conflating `projectPHID` (the defualt project to add to the task) with `boardPHID` (the board the column appears on).
Separate them to fix the beahvior.
Test Plan: Used "Add Task" from dropdown menu of a milestone column on a parent project's workboard.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15242
Summary: I missed this during cleanup.
Test Plan: Go to a project, then: Subprojects, Create Milestone, Cancel. No longer 404/fatals.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15241
Summary:
Fixes T8197. Currently, if you priority-sort a workboard and drag a card to the top or bottom, we change the priority even if we do not need to.
For example, if the lowest priority in a column is "Low", and you drag a "Wishlist" task underneath it, we incorrectly increase the priority of the task to "Low", when we do not actually need to touch it. This is bad/confusing.
A similar thing happens when dragging a "High" priority task to the top of a column where the highest priority is currently "Normal".
Test Plan:
- Create a column with a "Normal" task.
- Sort workboard by Priority.
- Drag a "High" task above it. After patch: task still "High".
- Drag a "Wishlist" task below it. After patch: task still "Wishlist".
Also dragged a ton of tasks into the middle of other tasks.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8197
Differential Revision: https://secure.phabricator.com/D15240
Summary:
Fixes T6580. Now:
- Empty field means "unlimited".
- Zero means 0.
- Nonzero means that number.
(Although you can now have fractional points, I didn't change columns to allow fractional limits, because too bad.)
Test Plan: {F1103688}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6580
Differential Revision: https://secure.phabricator.com/D15239
Summary: Ref T4427.
Test Plan:
- Dragged a 17 XP task from "Hunting" to "Slain".
- Saw 17 XP move.
- Level up!
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4427
Differential Revision: https://secure.phabricator.com/D15237
Summary:
Ref T4900. Briefly:
- Much more layout and rendering is now done in Javascript.
- This should otherwise be identical to the behavior at HEAD, except that:
- editing a task and removing the current board from it no longer removes the task; and
- points still don't work.
However, this can now plausibly support realtime workboard updates and other complex state-based behaviors like points calculations in a future change.
Test Plan:
- Changed card covers.
- Moved cards.
- Sorted board by priority and natural.
- Added new cards.
- Edited cards in place.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D15234
Summary:
Ref T4900. To eventually support realtime board updates, we need to be able to perform a board state update without the context of the action which caused it.
For example, if the server says "update card Y", we need to know what to do without being told "card Y was moved from column A to column B" explicitly. Currently, all the update code relies on knowing what happened and which nodes were affected.
This is only a small step forward, but starts making things a bit more independent and consistent.
Test Plan:
- Moved cards around.
- Changed card cover images.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D15228
Summary:
Ref T4900. Broadly, workboard state management is fairly ad-hoc now, which makes things like this (where some kind of edit affects global state) difficult:
- Updating points header to reflect a sum change after dragging a task.
- Changing progress bars after editing a task to change resolution or points value.
- Moving a card to the correct column after editing it and changing subprojects/iterations.
- Responding to real-time notifications about other users moving cards.
This begins rewriting the code in a way that can better accommodate these kinds of far-reaching state update.
This change just moves cover image stuff. I'll continue moving features one at a time until boards work better.
Test Plan: Updated some cover images.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D15224
Summary: Fixes T10316. Fixes T10311.
Test Plan:
- Create a project, create a milestone, go back to the parent, go to the workboard. Previously, fatal. Now, prompts you to create workboard.
- Create a project, create a milestone, create the parent workboard, put a task in the milestone's column, go to the milestone workboard. Previously, fatal. Now, prompts you to create workboard.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10311, T10316
Differential Revision: https://secure.phabricator.com/D15232
Summary:
Ref T4427.
- When points are configured, show them on the task detail page (just a simple property, at least for now).
- Typecast points better to avoid "joe changed points from 12 to 12." beacuse we compare the stored value (as a string) to the new value (as a double).
Test Plan:
- Saw points on detail view.
- Created task with points, then edited it without touching points. No more spurious "changed from 12 to 12" transaction.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4427
Differential Revision: https://secure.phabricator.com/D15223
Summary:
Ref T4427.
- New config option for labels, enabling, etc., but no UI/niceness yet.
- When enabled, add a field.
- Allow nonnegative values, including fractional values.
- EditEngine is nice and Conduit / actions basically just work with a tiny bit of extra support code.
Test Plan:
- Edited points via "Edit".
- Edited points via Conduit.
- Edited points via stacked actions.
- Tried to set "zebra" points.
- Tried to set -1 points.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4427
Differential Revision: https://secure.phabricator.com/D15220
Summary:
Ref T10288.
I couldn't figure out how to reasonably get the interior right borders to round like the mock, but I think this is otherwise mostly faithful. Feel free to fix stuff.
Test Plan: {F1100415}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10288
Differential Revision: https://secure.phabricator.com/D15219
Summary:
Currently never read or written.
Supports fractions.
There's no such thing as an unsigned double so this also supports negative values, technically, although I'll eventually prevent this in the UI.
Test Plan: `bin/storage upgrade`, then created and edited a task. Nothing was different.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15218
Summary:
Before edges, we stored some of this stuff directly on tasks.
- `attached` was migrated to edges in Jan 2013.
- `projectPHIDs` was never used, as far as I can tell?
- `ccPHIDs` was migrated away and dropped more than a year ago.
None of these columns are used in modern code (instead, modern code uses edges).
Test Plan: `grep`, browsed around, `bin/storage upgrade`, unit tests.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15216
Summary:
Fixes T7410.
- Adds a "Disable Workboard" action to the "Manage Backlog" menu.
- We'll probably move this somewhere else if/when that column gets too messy.
- Disabling a board hides it, prevents it from being recreated by non-editors, and hides the "Project (Backlog)" annotations.
- Resotring a board puts it back in pristine condition.
Test Plan:
- Disabled a board.
- Verified "(Backlog)" annotations vanished.
- Enabled a board.
Reviewers: chad
Reviewed By: chad
Subscribers: mbishopim3
Maniphest Tasks: T7410
Differential Revision: https://secure.phabricator.com/D15215
Summary: Fixes T10299.
Test Plan:
- Visited `/maniphest/?projects=x` locally, where `x` is some valid project slug.
- Before patch: Fatal on `requireViewer()` call.
- After patch: Works correctly, filling the correct project into parameters.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10299
Differential Revision: https://secure.phabricator.com/D15214
Summary:
Ref T10295
* Viewing Upcoming Events in the calendar would display 'Attending: ' even if there were not attendees. This caused confusion, such as 'Is it telling me I am "Attending?"'
* When a calendar event has no attendees, simply do not display the 'Attending: ' label
Test Plan:
* Add a new event with no one attending.
* Add a new event with one or more attendees.
* View the Upcoming Events query of the Calendar app.
* Notice how the one with no attendees does not show 'Attending: ' while the other with attendees will show the already existing 'Attending: jdoe, ssmith' label.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T10295
Differential Revision: https://secure.phabricator.com/D15207
Summary:
Ref T10010.
- Viewing an empty board with milestone columns did a meaningless edge query. Don't do that.
- When creating the first milestone of a parent, force the indexing engine to rematerialize it inline. This sets `hasMilestones` properly. Otherwise, the daemons may take some time to fix this in the indexer.
Test Plan:
- Viewed an empty board of a project with a milestone.
- Viewed a normal board.
- Created the first milestone of a project with a big queue of daemons, saw project state immediately fully reflect the project having milestones.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D15206
Summary: Ref T10010. Allows you to click "Milestone 99" to jump directly to that project.
Test Plan:
- Clicked milestone header, went to milestone.
- Clicked normal column header, nothing happened. Wow!
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D15204
Summary: This makes small cover images full-width instead of teeny tiny dots in the middle of an island of whitespace.
Test Plan: Uploaded a small cover image.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15203
Summary: This was slightly more complex than I believed, but not too terrible.
Test Plan:
{F1096126}
- Also used some normal file uploaders to make sure I didn't break that.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15202
Summary:
No way to set photos yet, but if you magic them in they work.
Primarily, this consolidates rendering logic so the move + edit + view controllers all run the same code to do tags / cover photos.
Test Plan: {F1095870}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15201
Summary:
Ref T10010. Milestones can't have subprojects, so this item isn't very useful.
I think there is also an argument for disabling "Members", but that panel is a little less useless and explains the membership rule, so I'm less certain about removing it. I do generally lean toward removing it at some point, though.
Test Plan:
- Viewed a milestone, no "Subprojects" menu item.
- Viewed a normal project, saw item.
- Edited both menus, saw consistent UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D15200
Summary:
When filling in filler projects, only select active ones.
Also use a slightly more modern method signature.
Test Plan: Disabled a project, saw it vanish from the control.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15199
Summary:
Ref T10010. Instead of autojoining projects, provide "Initial Members: [___]" that the user can fill in.
This is only available in the web UI when creating a (non-milestone) project.
Test Plan:
- Created a new project with no members.
- Created a new project with some members.
- Created a new milestone (no control).
- Created a new project with myself as a member and an "Editable By: Project Members" policy, to verify this use case still works properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D15195
Summary: Show on hovercards and the profile page itself.
Test Plan: Review a Milestone.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15193
Summary: Minor, just fall back to the grey icon in all cases (too much color for me).
Test Plan: Review a Project and a Profile
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15190
Summary:
Ref T10289. This probably doesn't cover everything but should do a little bit better.
Although we should mabye just exlude milestones from this menu completely?
Test Plan: {F1093937}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10289
Differential Revision: https://secure.phabricator.com/D15191
Summary:
Fixes T10287. Ref T10286.
- Link stuff properly.
- Generally, show "Parent (Milestone)" instead of "Milestone".
- This probably doesn't get 100% of `getName()` -> `getDisplayName()` swaps, but we can get those as we catch them.
Test Plan: See T10286. Also clicked stuff.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10286, T10287
Differential Revision: https://secure.phabricator.com/D15189
Summary:
Fixes T4136.
When listing projects in the "Visible To" selector control:
- Instead of showing every project you are a member of, show only a few.
- Add an option to choose something else which isn't in the menu.
- If you've used the control before, show the stuff you've selected in the recent past.
- If you haven't used the control before or haven't used it much, show the stuff you've picked and them some filler.
- Don't offer milestones.
- Also don't offer milestones in the custom policy UI.
Test Plan:
{F1091999}
{F1092000}
- Selected a project.
- Used "find" to select a different project.
- Saw reasonable defaults.
- Saw favorites stick.
- Tried to typeahead a milestone (nope).
- Used "Custom Policy", tried to typeahead a milestone (nope).
- Used "Custom Policy" in general.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4136
Differential Revision: https://secure.phabricator.com/D15184
Summary: Fixes T10281. Adds the closed icon (resolved, dupe, ect) as an attribute and makes the text grey again.
Test Plan:
View workboard with "All Tasks"
{F1092738}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10281
Differential Revision: https://secure.phabricator.com/D15187
Summary:
Ref T10010.
- Don't allow milestones to be reordered.
- Hide phantom subproject columns when reodrering.
- Don't allow subproject/milestone columns to be renamed.
- Force milestones to be ordered at the end, and in the correct order.
- Add some missing crumbs.
Test Plan: Reordered columns, renamed columns, made a new column, viewed column details.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D15183
Summary: Fixes T10275. We'd fatal on `$flex` not being defined.
Test Plan: Uninstalled badges, viewed profile. Before: fatal; now: no badges element appears but profile renders properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10275
Differential Revision: https://secure.phabricator.com/D15182
Summary: Adds which Projects a user is a member of to their profile, with a link to more. Build fallback states for no badges or no projects.
Test Plan:
Review a user with projects, without projects, with badges, without badges.
{F1084127}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15150
Summary: Ref T10010. This gets rid of, e.g., the "Iteration I" tag in the column for that milestone, as it is redundant with the column itself.
Test Plan: {F1090427}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D15181
Summary:
Ref T10010. These aren't perfect but I think (?) they aren't horribly broken.
- When a project is a parent project, destroy (as far as the user can tell) any custom columns.
- When a project has milestones, automatically generate columns on the project's workboard (if it has a workboard).
- When you move tasks between milestones, add the proper milestone tag.
- When you move tasks out of milestones back into the backlog, add the proper parent project tag.
- (Plenty of UI / design stuff to adjust.)
Test Plan:
- Dragged stuff between milestone columns.
- Used a normal workboard.
- Wasn't able to find any egregiously bad cases that did anything terrible.
{F1088224}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D15171
Summary: Ref T10010. This isn't totally comprehensive, and a lot of behaviors aren't testable (e.g., all the Javascript stuff) but at least covers the basic create/move/reorder operations.
Test Plan: `arc unit`
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D15178
Summary: Ref T10010. This retires the old way of doing things inside ColumnPositionQuery. It is now obsolete and lives in BoardLayoutEngine instead.
Test Plan:
- Moved cards, created cards, swapped filters, orders, etc.
- Some degree of unit testing coming in the next diff.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D15177
Summary: Ref T10010. This gets rid of the last dependency on the weird ColumnPositionQuery code.
Test Plan:
- Viewed workboards.
- Used batch editor.
- Created a new workboard.
- Dragged stuff around.
- Created new tasks into columns.
- Changed order from natural to priority, dragged things around.
- Switched filter to custom filter, "all tasks", etc.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D15176
Summary:
Ref T10010. See D15174. This gets rid of the "actually apply the change" callsite and moves it to layout engine.
Next up is to make the board view use the layout engine, then throw away all the whack code in ColumnPositionQuery, then move forward with D15171.
Test Plan:
- Dragged tasks within a column.
- Dragged tasks between columns.
- Dragged tasks to empty columns.
- Created a task in a column.
- Swapped board to priority sort, dragged a bunch of stuff all over.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D15175
Summary:
Ref T10010. This is a precursor to D15171, which I'll eventually rebuild on top of these changes.
Currently, ColumnPositionQuery does a lot of "column layout" stuff that's very similar to the Milestone/Subproject stuff that needs to happen in D15171. The current approach there ended up splitting this layout stuff across two unrelated classes (ColumnPositionQuery + BoardViewController), neither of which is a particularly great place to do it -- the Query is too low-level, and the Controller is too high-level.
Instead, introduce a new "LayoutEngine" which does all this layout stuff. Swap two of the four places that we query this stuff over to the new engine:
- "Project (Column)" on tasks.
- Transaction generation when moving cards.
These sites aren't swapped by this diff, but will be by the next one:
- Actually applying transactions.
- Main layout for boards (this could swap easily now, but applying transactions currently relies on position writes having taken place, so it can't swap until the other one swaps).
Once everything is swapped over, I should be able to add the D15171 logic to LayoutEngine instead of BoardViewController and end up with a cleaner approach overall.
One particularly benefit is that //looking// at a board won't do a bunch of position writes anymore, which wasn't a big deal, but which I was a bit uneasy with.
Test Plan:
- Viewed tasks that are on boards, saw column annotations in project list.
- Moved cards between columns on a board.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D15174
Summary: I don't think these ever had hovercards, but they should with subprojects/new design.
Test Plan: pointey pointey, got a card
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15180
Summary: Fixes T10273. The threshold is `null` if no chunk engines are available, but the code didn't handle this properly.
Test Plan: Disabled all chunk engines, reloaded, hit issue described in task. Applied patch, got clean file content.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10273
Differential Revision: https://secure.phabricator.com/D15179
Summary: No UI changes, just some search and replace for UI consistency.
Test Plan: Test person and object hovercards still work. UIExamples too.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15172
Summary: Centers the page for consistency for the rest of Phame, puts blog list on right for better mobile support.
Test Plan: Review PhameHome at all breakpoints.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15170
Summary:
Ref T10010. When you try to add "Sprint 35" to a task, remove "Sprint 34", etc. Briefly:
- A task can't be in Sprint 3 and Sprint 4.
- A task can't be in "A" and "A > B" (but "A > B" and "A > C" are fine).
- When a user makes an edit which would violate one of these rules, preserve the last tag in each group of conflicts.
Test Plan:
- Added fairly comprehensive tests.
- Added a bunch of different tags to things, saw them properly exclude conflicting tags.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D15167
Summary: Fixes T10259. There was no real reason to do this `ip2long()` stuff in the first place -- it's very slightly smaller, but won't work with ipv6 and the savings are miniscule.
Test Plan:
- Ran migration.
- Viewed logs in web UI.
- Pulled and pushed.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10259
Differential Revision: https://secure.phabricator.com/D15165
Summary:
Ref T5240.
- Add proper class when dropping cards.
- Add proper class when creating new cards.
- Make X-drag explicit so that it works if there's only one column.
- Stop tootips when dragging, resume them after dropping.
- Move CSS rule for consistency.
- Allow user to hit "Escape" to cancel an in-progress drag.
Test Plan:
- Dropped cards.
- Created new cards.
- X-dragged on a workboard with one column and a dashboard.
- Dragged over a tooltip (no tip), dropped, moused over tooltip (tip).
- Hit escape during a drag.
Reviewers: chad
Reviewed By: chad
Subscribers: cspeckmim
Maniphest Tasks: T5240
Differential Revision: https://secure.phabricator.com/D15163
Summary:
Ref T5240. With the new approach, the draggable clones lose their containers, so they don't get affected by rules like `.container .item`.
Put classes on the cards/items and use `.board-item.item` and `.standard-item.item` to apply rules instead.
This didn't turn out //too// gross, and seems relatively OK / not obviously broken.
Test Plan:
- Dragged cards on a workboard.
- Dragged items in normal lists (tasks, pinned apps).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5240
Differential Revision: https://secure.phabricator.com/D15161
Summary: Reworks cards to add an assignee head and tooltip on workboards. This feels like a reasonable starting point, but they may move depending on feedback.
Test Plan:
View a lot of boards. Assign and unassign a task.
{F1085739}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Luke081515.2, Korvin
Differential Revision: https://secure.phabricator.com/D15158
Summary: I believe this got clobbered in rP8b6edaa4e238a809fe78e6d14ad0705545f8179f. This index doesn't seem to be present in the line dictionary and we're now relying on `$line_index` for the current position.
Test Plan:
before {F1085522}
after {F1085521}
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D15156
Summary:
Mostly, this has just been sitting in my sandbox for a long time. I may also touch some charting stuff with subprojects/milestones, but don't have particular plans to do that.
D3 seems a bit more flexible, and it's easier to push more of the style logic into CSS so you can fix my design atrocities. gRaphael also hasn't been updated in ~3+ years.
Test Plan:
{F1085433}
{F1085434}
Reviewers: chad
Reviewed By: chad
Subscribers: cburroughs, yelirekim
Differential Revision: https://secure.phabricator.com/D15155
Summary: Fixes T10247. The flavor icons are unhelpful/confusing in these contexts; show a boringer icon instead.
Test Plan: Used tokenizer to select user with custom profile icon. Reloaded page. Saw boringer icon in both cases.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10247
Differential Revision: https://secure.phabricator.com/D15154
Summary: Fixes T10242. Currently, we don't extract files, mentions, etc., properly from user profile blurbs.
Test Plan: Uploaded a file to my profile blurb, saw it attach properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10242
Differential Revision: https://secure.phabricator.com/D15153
Summary: Ref T10010. Restores subprojects and milestones to the UI with a more modern style and more warnings.
Test Plan:
{F1085207}
{F1085208}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D15152
Summary:
Fixes T10250.
Rename the one I added to `hasAnyProperties()` for clarity.
Test Plan:
- Viewed a project profile with content.
- Viewed a project profile with no properties.
- Viewed a workboard with tasks that had a mixture of additional projects and no additional projects.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10250
Differential Revision: https://secure.phabricator.com/D15151
Summary: Designer, Musician, Spy, Robot
Test Plan: Click Choose Icon, see that I am a designer.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15147
Summary: Ref T10228. Commands like `git-http-backend` can emit errors with raw bytes in the output. Sanitize these if present so we can log them in JSON format.
Test Plan: Edited this into production. >_> sneaky sneaky <_<
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10228
Differential Revision: https://secure.phabricator.com/D15144
Summary: It feels wierd to edit a project or profile and not see the changes. For now add them back to the Manage page.
Test Plan: Edit a Profile, Edit a Project. See updates on Manage page.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15140
Summary:
- Redirect to profileview when new image is uploaded.
- Add ProfileNav to EditPicture on Profile
- Add ProfileNav to EditProfile on Profile
Test Plan: Set new images on Profiles and Projects. See new redirect. See new navs.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15132
Summary: Fixes T10226. I just made a mistake here when rewriting this recently.
Test Plan: {F1079166}
Reviewers: chad, avivey
Reviewed By: avivey
Maniphest Tasks: T10226
Differential Revision: https://secure.phabricator.com/D15131
Summary: Fixes T10176. The prefix is not useful in the JIRA context, and doubtfully useful in Asana.
Test Plan: Load, make comment on revision, see link in JIRA is pretty.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Maniphest Tasks: T10176
Differential Revision: https://secure.phabricator.com/D15119
Summary:
Ref T10228. This is currently quite limited:
- No UI.
- No SSH support.
My primary goal is to debug the issue in T10228. In the long run we can expand this to be a bit fancier.
Test Plan:
Made various valid and invalid clones, got sucess responses and not-so-successful responses, viewed the log table for general corresponding messages and broad sanity.
Ran GC via `bin/phd debug trigger`, no issues.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10228
Differential Revision: https://secure.phabricator.com/D15127
Summary:
A user in IRC seemed very confused by this, and worked extremely hard to shoot themsevles in the foot by manually writing locked configuration to the database.
Try to explain why configuration is locked better.
Test Plan:
Mostly reading.
{F1078905}
{F1078906}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15128
Summary: All our builtin images use #c4cde0 for the backdrop. This makes generation match the builtins.
Test Plan:
Build a new bug icon in Maniphest
{F1077934}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15126
Summary: Mostly for consistency, we're not using other forms of icons and this makes all classes that use an icon call it in the same way.
Test Plan: tested uiexamples, lots of other random pages.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15125
Summary: Reasonable first pass, removes the "light" header, due to pain of upkeep. Reinforces UI color into the Profile Nav (and later likely dropmenu hovers). Most of this is reasonably easy to maintain now, but I may do a more accurate color pass after I get some more time together with it. For now this feels pretty good if you're developing in a different color UI.
Test Plan:
Switch between all the colors, hover over all the states.
{F1076766}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15120
Summary:
- Better spacing for images
- Remove border
- White BG on Members page
Test Plan: Review Projects / Project Home / Project Members
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15118
Summary: Fixes T10213. I think the "Edit" item was originally conditional (or maybe I just forgot to add that part), but that got dropped when we swapped how it worked. This is all stable now anyway and can be available without needing prototypes enabled.
Test Plan: Edited a project menu.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10213
Differential Revision: https://secure.phabricator.com/D15117
Summary: Cleans up Workboards to match the mocks. No new functionality, just more consistent colors/spacing/common components.
Test Plan:
Visit a few workboards, drag and drop items. Mobile, Tablet, Desktop
{F1070733}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15115
Summary: Fixes T10217. This extra entry is just a mistake because of `rst` + `rest` both being valid suffixes. We don't need both entries.
Test Plan: Edited a paste, only saw one entry in dropdown for restructured text.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10217
Differential Revision: https://secure.phabricator.com/D15114
Summary: Ref T10054. Prevent users from removing this item and locking themselves out of the system unless they can guess the URI.
Test Plan: Tried to disable "Manage", wasn't permitted to.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15113
Summary: See T10214 for context. These transaction types are obviously wrong as far as I can tell.
Test Plan:
Created a revision and didn't see an error in the daemon log.
```lang=php
<?php
require_once dirname(__FILE__).'/phabricator/scripts/__init_script__.php';
$yelirekim = (new PhabricatorPeopleQuery)
->setViewer(PhabricatorUser::getOmnipotentUser())
->withUsernames(['yelirekim'])
->executeOne();
$raw_diff = (new PhabricatorDifferenceEngine)
->generateRawDiffFromFileContent('oldfile', 'newfile');
$diff = (new ConduitCall('differential.createrawdiff', [
'diff' => $raw_diff,
]))
->setUser($yelirekim)
->execute();
$xactions = (new DifferentialDiffTransactionQuery)
->setViewer($yelirekim)
->withObjectPHIDs([$diff['phid']])
->execute();
foreach ($xactions as $xaction) {
echo $xaction->getPHID().':'.$xaction->getTitle().PHP_EOL;
}
```
for sanity
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: michaeljs1990, epriestley
Differential Revision: https://secure.phabricator.com/D15112
Summary: Updates People profiles to look more like Project profiles. This removes Conpherence and Flag links. Don't think you like Conpherence links much and for Flags maybe we can put them in the quick create menu?
Test Plan:
View profiles with and without Badges.
{F1069365}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15111
Summary: Minor point of polish, but feels really nice. Hover over photo and edit a link to change the picture.
Test Plan:
hover hover, clicky clicky
{F1069179}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15109
Summary:
Ref T10144. This isn't comprehensive, but we can give it a try and see how it feels?
- EditEngine forms now say "Tags" instead of "Projects".
- Modern SearchEngine forms now say "Tags" instead of "Projects".
- For clarity, replaced as much "in project" language as I could find with "tagged with project" language.
Test Plan: reading / grepping + used "not tagged with any project" token
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10144
Differential Revision: https://secure.phabricator.com/D15108
Summary: Fixes T6501. This adds more API information to the newish `project.search` API method.
Test Plan: Called `project.search`, used attachments.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6501
Differential Revision: https://secure.phabricator.com/D15105
Summary: This improves consistency (by making this UI more similar to the projects UI) and gives us more flexibility the next time we update user profiles.
Test Plan:
{F1068889}
Took all the actions (probably?) to check that all the redirects were updated.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15104
Summary: Ref T10054. This primarily improves aesthetics and consistency for member/wathcher lists in projects.
Test Plan:
{F1068873}
{F1068874}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15103
Summary: Moves some profile css into PHUI, cleans up mobile view and desktop spacing.
Test Plan: Test Project at desktop and mobile breakpoints.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15106
Summary: Ref T10054.
Test Plan:
{F1068420}
Also looked at a project which did have stuff to make sure the stuff still worked.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15102
Summary: Fixes T10212. This method was removed in D14990, but I missed a callsite.
Test Plan: Disabling blame now works nicely.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10212
Differential Revision: https://secure.phabricator.com/D15100
Summary: I moved history to manage and missed this callsite.
Test Plan: Use present icon/color quick select.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15099
Summary:
First pass at a new Project Home page. This is starting to sprawl, so punting this up now before it gets too large.
- Project homes now have "large header"
- Custom Fields / Descriptions are in the main column
- Feed is simpler visually
- new "Background" option for PHUIObjectBoxView
- move header buttons globally to "Grey" instead of "Simple"
- New color and hover states for "Grey"
- Transitions on Buttons haha
- Edit Icon on Nav is now under "Manage" panel
- New "Manage" Panel
TODO:
- More testing of bad cases of Custom Fields
- Members Page in flux, needs design
- Um still not sure how to make Custom Field not show UI
Test Plan:
Lots of random Project page visits. Save project, watch project, edit project, etc.
{F1068191}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15097
Summary:
Fixes T10211. This transaction can either be setting or removing the "destroyed" flag, but we show "destroyed" in both cases.
Instead, if the transaction is clearing the flag, render "restored".
Test Plan: {F1068142}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10211
Differential Revision: https://secure.phabricator.com/D15096
Summary: Ref T10054. Since we no longer have the "workboard default if it exists" rule, provide a quick way to make it the default.
Test Plan: Created a new workboard with the box checked, saw menu change appropriately.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15092
Summary: racooons → racoons
Test Plan: Read again the sentence.
Reviewers: #blessed_reviewers, chad
Reviewed By: #blessed_reviewers, chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D15094
Summary:
Ref T10054. Ref T6961.
- Existing projects with workboards had "Workboard" as the default menu item. Retain this behavior.
- Populate the recently-added `hasWorkboard` flag so we can do a couple of things a little faster (see T6961).
Test Plan:
- Ran migration.
- Verified a bunch of projects looked sensible/correct after the migration.
- Created a workboard, verified `hasWorkboard` got set properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6961, T10054
Differential Revision: https://secure.phabricator.com/D15093
Summary:
Ref T10054. Uncreated workboards feel a little awkward right now because you lose the menu. Instead, keep the menu.
I also plan to:
- add a "[X] Make the workboard the default view for this project." checkbox; and
- resolve T6961.
...which will touch this workflow, so modernize/straighten it out.
Test Plan:
Viewed workboard, no access state, empty state. Created empty board, imported board.
{F1066973}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6961, T10054
Differential Revision: https://secure.phabricator.com/D15091
Summary: Ref T10054. This is all pretty straightforward. Also include some project-specific examples in the project documentation.
Test Plan: Read documentation.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15090
Summary:
Ref T10054.
- Just let users delete non-builtin items.
- Let users choose a default item explicitly.
- Do a better job of cleaning up items which no longer exist or belong to uninstalled applications.
(NOTE) This has one user-facing change: workboards are no longer the default on projects with workboards. I think this is probably OK since we're giving users a ton of new toys at the same time, but I'll write some docs at least.
Test Plan:
- Deleted custom items.
- Disabled/enabled builtin items.
- Made various things defaults.
- Uninstalled Maniphest, saw Workboards tab disappear entirely.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15089
Summary: Fixes T5819. Adds configuration for setting color labels on projects and changing the default. Options are locked to what we make available.
Test Plan: {F1066823}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5819
Differential Revision: https://secure.phabricator.com/D15088
Summary: `alterClass()` is strict about true/false but we set 0/1 elsewhere.
Test Plan: Collapsed/expanded menu, reloaded expanded menu, clicked collapse, got immediate collapse.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15087
Summary:
Fixes T10196. This is a weird interaction and this might not be the best long-term fix, but just get it working OK for now.
General problem is that Quicksand doesn't currently use GET for requests. This is a very unusual case where the method is relevant. In the future, I might change Quicksand to use GET.
Test Plan: Clicked "Open Tasks" with Quicksand active, got a results list.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10196
Differential Revision: https://secure.phabricator.com/D15082
Summary: Mostly a visual spacing pass, also adds in circle icons for edit, collapse. For now removing the fixed position on the icons for simplicity while the basics are being polished.
Test Plan: Projects, Profiles, wide and narrow.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15081
Summary:
Ref T10195. Distinguish between "database does not exist" and "database exists, you just don't have permission to access it".
We can't easily get this information out of INFORMATION_SCHEMA but can just `SHOW TABLES IN ...` every database that looks like it's missing and then look at the error code.
Test Plan:
- Created a user `limited` with limited access.
- Ran `bin/storage adjust`.
- Got hopefully more helpful messages about access problems, instead of "Missing" errors.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10195
Differential Revision: https://secure.phabricator.com/D15079
Summary: Fixes T10192. This key improves some common queries and is not currently present.
Test Plan: See discussion in T10192. Verified current query plan of real queries is garbage and improved by adding this key.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10192
Differential Revision: https://secure.phabricator.com/D15075
Summary:
Fixes T10186. After D14970, `diffusion.filecontentquery` puts the content in a file and returns the file PHID.
However, it does this in a way that doesn't go through the chunking engine, so it will fail for files larger than the chunk threshold (generally, 8MB).
Instead, stream the file from the underlying command directly into chunked storage.
Test Plan:
- Made a commit including a really big file: 4dcd4c492b
- Used `diffusion.filecontentquery` to load file content.
- Parsed/imported commit locally.
- Used `diffusion.filecontentquery` to load content for smaller files (README, etc).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10186
Differential Revision: https://secure.phabricator.com/D15072
Summary: We plan to use these more in future mocks. Adds base colors and re-uses in Phame.
Test Plan: Phame, mobile and desktop.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15069
Summary: Ref T10054. This is mostly for completness so I can reference it when closing all the related tasks.
Test Plan: Read documentation.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15066
Summary:
Ref T10054. Ref T6113. Users can currently subscribe to projects, which causes them to receive:
# mail about project membership changes, description changes, etc; and
# mail to the project, e.g. when the project is added as a subscriber on a task, or a reviewer on a revision.
Almost no one cares about (1), and after D15061 you can use Herald to get this stuff if you really want it. (It will get progressively more annoying in the future with external membership sources causing automated project membership updates.)
A lot of users are confused about (2) and how it relates to membership, watching, etc, and most users who want (2) don't want (1).
Instead, add an explicit option for this and explain what it does.
This is fairly verbose but I've hidden it on the member/watch screen, which is now the "explain how projects work" screen, I guess.
Test Plan:
{F1064929}
{F1064930}
{F1064931}
- Disabled/enabled mail for a project.
- Sent mail to a project with mail disabled, verified I didn't get a copy.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6113, T10054
Differential Revision: https://secure.phabricator.com/D15065
Summary:
Ref T6183. Ref T10054. Historically, only members could watch projects because there were some weird special cases with policies. These policy issues have been resolved and Herald is generally powerful enough to do equivalent watches on most objects anyway.
Also puts a "Watch Project" button on the feed panel to make the behavior and meaning more obvious.
Test Plan:
- Watched a project I was not a member of.
- Clicked the feed watch/unwatch button.
{F1064909}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6183, T10054
Differential Revision: https://secure.phabricator.com/D15063
Summary: Ref T10054. There is no technical or product reason not to support this, and it is largely analogous to removing subscribers.
Test Plan:
- Removed watchers.
- Removed members.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15062
Summary:
Ref T10054. Ref T6113. I'm going to remove subscribers from projects to fix the confusion between "watch" and "subscribe".
Users who have unusual use cases where they legitimately want to know when a project's description is updated or members change can use Herald to follow it.
This is also useful in general and improves consistency, although I don't have too many use cases for it.
Test Plan: Wrote a Herald rule, edited a project, saw the rule fire and send me email about the change.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6113, T10054
Differential Revision: https://secure.phabricator.com/D15061
Summary:
Ref T10054. This shuffles some stuff around to move us closer to mocks in M1450 in terms of what information is on which pages.
Home now has feed, members, watchers, link to "edit project / project edit history".
History now has edit history, edit details, edit picture, archive/unarchive.
Test Plan:
New home page:
{F1064889}
New edit/history page:
{F1064890}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15060
Summary:
Ref T10054. This tries to make the members page a bit more consistent and provide hints to users about subproject/milestone membership rules. In particular:
- You now join, leave, watch, unwatch, add and remove members, and lock and unlock membership from the members screen.
- We now explain the membership rule for the project on this screen. There are currently four rules:
- Normal Project: Join/leave normally.
- Parent Project: Uses subprojects to determine members.
- Milestone: Uses parent project to determine members.
- Locked: Membership is locked.
- (Future) Imported from LDAP/other external sources: Membership is determined by something else.
Test Plan: {F1064878}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15059
Summary:
Ref T10054. I think this gets everything except:
- circles on icons;
- I spent ~15 minutes poking at animations but wasn't able to get anything that looked reasonable whatsoever.
Test Plan:
- Collapsed menus.
- Expanded menus.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15056
Summary: Ref T10010. Fixes T10107. When we publish a transaction about a project, we perform visibility checks for many different users. We need to know all of the ancestors' members to perform these checks.
Test Plan:
- Before patch: when updating a subproject, daemons fatal trying to publish things because they can not test visibility of parent projects.
- After patch: daemons successfully publish subproject updates.
- Also added a unit test.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010, T10107
Differential Revision: https://secure.phabricator.com/D15054
Summary: Ref T10054. The daemons look for this but currently can't find it.
Test Plan: Ran daemons, clean exit on profile menu edits instead of permanent failure.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15053
Summary: These are old project image choices, remove and only go with FontAwesome related images.
Test Plan: Project -> Edit Picture -> Save
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15051
Summary: Removes header gradient images for flat, CSS controlled colors. I didn't convert the "pony" colors over, going with few options for easier theme-ability.
Test Plan:
Test each color choice.
{F1063828}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15052
Summary:
Fixes T6856. Fixes T10164.
- Make the profile image composer code use the underlying icon name instead of the top-level icon key, so it works instead of 404'ing.
- Change the button to show a preview of the profile icon instead of the text "Use Icon and Color".
- When creating a new non-milestone project, automatically set the profile image to the icon + color image.
Test Plan:
- Created several new projects, saw appropriate default icons.
- Edited projects, saw icon previews.
- Clicked icon buttons to set icons.
- Poked around other applications which use builtins (Pholio, user profiles) to look for anything I broke, but everything seemed fine.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6856, T10164
Differential Revision: https://secure.phabricator.com/D15050
Summary: Ref T4245. Fixes T10172. These regular expressions were simply incorrect: they intend `<start> (form one | form two) <end>` but were written as `(<start> form one) | (form two <end>)` which allowed stuff like "R2/R13" to be interpreted as a monogram because it matches `(<start> form one)`.
Test Plan: Parsed commit `ba46ffa6169c` from RTEMS repository, see T10172. Before patch, got an identical trace; after patch, clean import.
Reviewers: chad, avivey
Reviewed By: avivey
Maniphest Tasks: T4245, T10172
Differential Revision: https://secure.phabricator.com/D15049
Summary:
Ref T10168. When we try to remove an additional hashtag, we remove the normalized version.
Instead, remove both the literal and normalized versions. This allows us to remove old/invalid slugs.
Test Plan: Removed garbage slugs like `[,*,]`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10168
Differential Revision: https://secure.phabricator.com/D15048
Summary:
Ref T10168.
Around October 12, T9551 made project hashtags stricter and prevented them from containing characters like comma (`,`).
Around December 27, D14888 changed how hashtags queries work so that the query does normalization instead of requiring the caller to normalize.
After the Dec 27 change, projects from before Oct 12 with now-invalid hashtags will no longer load when queried directly by hashtag, because the page queries for `old,[silly]hash,,tag` or whatever, it gets normalized into `old_silly_hash_tag`, and then there are no hits.
Instead, at least for now, query by both the exact raw text and the normalized hashtag. This should keep older stuff working until we can give users more support for migrating forward.
Test Plan:
- Forced a project to have a bogus hahstag.
- Before patch: clicking its tag 404'd.
- After patch: clicking its tag now works.
- Visited a project by alternate hashtag.
- Visited a project by denormalized hashtag and alternate hashtag (e.g., capital letters instead of lowercase letters), saw it redirect/normalize properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10168
Differential Revision: https://secure.phabricator.com/D15047
Summary: Icon in a circle. Base class, not much in the way of color choices.
Test Plan:
UIExamples, Chrome.
{F1062027}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15034
Summary: Ref T10168. When we render this control, we currently don't put commas into the value correctly if there are multiple alternative hashtags.
Test Plan: Edited a project with multiple alternate hashtags. Before change: they all got smushed together. After change: properly comma-separated.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10168
Differential Revision: https://secure.phabricator.com/D15045
Summary: Fixes T10169. Diffs with no build targets were incorrectly showing as though they had no test coverage, when we actually want to show them having no coverage information available.
Test Plan: Viewed an older revision, saw a column of "Not Executable" before change, now see no column.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10169
Differential Revision: https://secure.phabricator.com/D15044
Summary: Fixes T10167. We were dropping infrastructure joins.
Test Plan: Queried for questions by project.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10167
Differential Revision: https://secure.phabricator.com/D15043
Summary: Motivate your employees with inspirational quotes. A new quote every day!
Test Plan: So inspirational.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15026
Summary:
Ref T10054. Primary goal is to be able to remove IconNav from the codebase.
I've made these non-editable so users can't customize them yet. We //might// want administrators to customize these globally instead? In any case, we avoid a bunch of product questions by just locking these down for now.
Test Plan: {F1061348}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15020
Summary: Ref T10054. Take specialization off the objects and put it on Engine subclasses instead. One reason for this is that certain objects (like users) might have multiple different sets of panels in the future (e.g., their user profile and their home page).
Test Plan:
- No user-visible changes.
- PanelEngine no longer has any hardcoded "project" stuff.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15018
Summary:
Ref T10054. This makes the profile menu full-height. It uses two pieces of dark magic:
- `calc()`, which allows you to do math in CSS.
- The `vh` unit, which is CSS for "viewport height".
Apparently this kind of stuff just works now? CSS got good at some point?
Test Plan:
- Page looks correct in Safari, Chrome, Firefox.
- Checked `caniuse.com` for `vh` and `calc()`, saw they're supported?
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15017
Summary:
Ref T10054. I haven't done any of the big-picture layout stuff yet, but this should get look-and-feel somewhere in the ballpark of reasonablness, I think.
Major missing stuff:
- No "collapse" state or action yet.
- Menu is not full-height (requires changes to the rendering pipeline).
Test Plan: {F1060941}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15016
Summary: Ref T3725. This probably has 900,000 bugs. This will need updates for subprojects/milestones.
Test Plan:
- Tested very gently in Safari, Firefox and Chrome.
- Reasonable inputs appear to work.
- Clicking, escape, tab, return, arrow keys work OK?
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T3725
Differential Revision: https://secure.phabricator.com/D15029
Summary: Ref T10054. Just simplifying this a bit before I start laying in the new profile menus.
Test Plan:
- Viewed Diviner on desktop and checked the mobile menu.
- Viewed Files on desktop and checked the mobile menu.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15015
Summary:
Ref T10054.
I made this a dropdown (currently: "Visible" or "Disabled") since I imagine we //miiiight// want to add a "Hidden, but click 'More' to reveal" state or do other special stuff in this vein. Not 100% sold on that but seemed within the realm of plausibility.
Test Plan: {F1060759}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15012
Summary: Ref T10054. Allows users to drag menu items to reorder them.
Test Plan: Reordered a project menu.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15011
Summary:
Ref T10054. This does a big chunk of the legwork to let users reconfigure profile menus (currently, just project menus).
This includes:
- Editing builtin items (e.g., you can rename the default items).
- Creating new items (for now, only links are available).
This does not yet include:
- Hiding items.
- Reordering items.
- Lots of fancy types of items (dashboards, etc).
- Any UI changes.
- Documentation (does feature: TODO link for documentation).
Test Plan:
{F1060695}
{F1060696}
{F1060697}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15010
Summary:
hack hack hack
(`class_exists()` no longer throws in a libphutil environment.)
Test Plan: derpaderp
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15013
Summary: Fixes T10139. This clarification seems reasonable to me.
Test Plan:
- Viewed a revision with context.
- Clicked "Show All Context".
- Saw "All Context Shown".
{F1060624}
{F1060625}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10139
Differential Revision: https://secure.phabricator.com/D15009
Summary: Ref T10054. This mostly makes sure that mobile gets to have the same profile menu that Desktop does.
Test Plan:
- Viewed menus on mobile, saw all profile menu actions available.
- Viewed/used changed pages (column detail, edit column, edit picture).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15008
Summary: Ref T10054. This has no product impact, but prepares us for customizable side nav on "profiles" (today, projects; probably users some day; and maybe other stuff down the road).
Test Plan: Clicked all links on a profile, everything was exactly the same as before.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15007
Summary:
Ref T4705 (there are also some other adjacent related tasks dealing with URIs).
Currently, we issue a "get repositories matching URIs: ..." query by loading every possible repository and then checking their URIs in PHP.
Instead, put URIs in a separate table. I plan for each repository to potentially have multiple URIs soon, so this prepares for that.
Test Plan:
- Ran migrations.
- Looked at index table, made sure it appeared sensible.
- Ran some queries by `uri` to find repositories, found the repositories I expected.
- Updated the remote URI of a repository, saw queries / index update appropriately.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4705
Differential Revision: https://secure.phabricator.com/D15005
Summary: Fixes T10096. The `**` was being parsed as part of the hashtag, so `**#asdf**` interpreted `#asdf**` as a hashtag.
Test Plan: Unit test; bolded stuff with hashy contents.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10096
Differential Revision: https://secure.phabricator.com/D15006
Summary:
Fixes T10135. When the viewer is a member of no projects, specify the constraint type as a new "EMPTY" type.
When a query has an "EMPTY" constraint, fail fast with no results.
Test Plan:
- Viewed a viewerprojects() query result set as a user in no projects.
- Before patch: got a lot of hits. After patch: no hits.
- Viewed a normal result set, no changes.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10135
Differential Revision: https://secure.phabricator.com/D15003
Summary: A lot of confusing stuff happens when you create a milestone or subproject which isn't explained clearly in the UI. This is causing more harm than good on the balance since we're still figuring out how to move forward here. Just turn it off for now until we're closer to pushing it forward.
Test Plan: Viewed a project, no more UI for subprojects or milestones.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14999
Summary:
See IRC. We're supposed to repair configuration, but if custom validators throw a generic `Exception` or use `PhutilTypeSpec` to do a check, we may explode way harder than we intend to.
Instead, soften these exceptions into validation exceptions so we repair configuration, raise a setup issue, and continue.
Test Plan: {F1059609}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14998
Summary:
Ref T10121. This doesn't work at all at HEAD, and even when it did it was mostly just confusing to installs with unexpected setups where Phabricator is receiving mail at `@mycompany.com` and this is colliding with real addresses.
It might make sense to restore it some day after the next Conphernece update, but just strip it out for now. Since it doesn't work anyway, I'm pretty confident no one is using it.
Test Plan:
- Before patch: send mail to `dog@local.phacility.com`, got a policy error from Conpherece.
- After patch: sent mail to `dog@local.phacility.com`, got a correct "no routable recipients" error.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10121
Differential Revision: https://secure.phabricator.com/D14997
Summary:
Ref T10121. If a user sends mail with duplicate headers, like:
```
X-Duplicate: A
X-Duplicate: B
```
...and we process it with `mail_handler.php`, we may end up with `array('A', 'B')` as the header value. When we try to write this back into an error response mail, it fails.
Test Plan:
- Generated a message with duplicate headers.
- Piped it into `mail_handler.php` with `--process-duplicates` and `--trace` to get a look at it.
- Faked an exception.
- Before patch: bad error email.
- After patch: clean error email showing multiple header values.
```
$ ./bin/mail show-outbound --id 12386
PROPERTIES
ID: 12386
Status: queued
Related PHID:
Message:
PARAMETERS
sensitive: 1
is-error: 1
force: 1
subject: Error Processing Mail (Exception)
raw-to: ["epriestley@phacility.com"]
HEADERS
X-Phabricator-Sent-This-Message: Yes
X-Mail-Transport-Agent: MetaMTA
X-Auto-Response-Suppress: All
TEXT BODY
Your email to Phabricator was not processed, because an error occurred while
trying to handle it:
Exception: TEST
-- Original Message Body -----------------------------------------------------
testy testy
-- Original Message Headers --------------------------------------------------
from: Evan Priestley <epriestley@phacility.com>
content-type: text/plain; charset=us-ascii
content-transfer-encoding: 7bit
x-smtp-server: smtp.gmail.com:epriestley@phacility.com
subject: test outbound mail
message-id: 7isvptmllqvdvtdxthvdwzg3woj5au7csyuh3hopypjv6y6hqb32qm4bcrd4jtid
x-universally-unique-identifier: 4E489E20-F674-49B2-94BA-0DE44F504EAA
date: Mon, 11 Jan 2016 09:50:12 -0800
date: Mon, 11 Jan 2016 09:50:13 -0800
date: Mon, 11 Jan 2016 09:50:14 -0800
date: Mon, 11 Jan 2016 09:50:15 -0800
to: epriestley@yghe.net
mime-version: 1.0 (Mac OS X Mail 8.2 \(2104\))
HTML BODY
(This message has no HTML body.)
```
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10121
Differential Revision: https://secure.phabricator.com/D14996
Summary: Fixes T8826. Git tracks an "author date", which may be different from the "committed date". We don't currently extract/show this; do so.
Test Plan: {F1059235}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8826
Differential Revision: https://secure.phabricator.com/D14995
Summary:
Fixes T10117.
- I accidentally broke setting `null` to unassign tasks at some point when I added richer validation.
- Raise a better error if the user passes junk.
Test Plan:
- Unassigned a task via API and web UI.
- Reassigned a task via API and web UI.
- Tried to do an invalid assign via API, got a sensible error.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10117
Differential Revision: https://secure.phabricator.com/D14992
Summary: Ref T4245. Full commit display names (like `rPaaaa`) are going to be obnoxious soon in some cases (e.g., `rPaaaa` becomes `R123:aaaa`, which is much uglier) so reduce how often we show the repository in cases where it isn't really necessary to include it.
Test Plan:
- Saw no more `rX` on repository list view for Git/Mercurial (still present for Subversion).
- Saw no more `rX` on various repository detail views, except when referencing other commits (e.g., mentions).
- Grepped for removed `getShortName()`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D14990
Summary:
Ref T4245.
- Rename "Clone/Checkout As" to "Short Name" in the UI.
- Allow any repository to have a short name, not just hosted repositories.
Test Plan:
- Ran migration.
- Reviewed old transactions, saw they looked good.
- Edited an existing repository's short name.
- Gave an imported repository a new short name.
- Removed a repository's short name.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D14989
Summary:
Ref T4245. This allows `bin/repository update bread` to work, in addition to `rBREAD`, `R123`, `123`, `BREAD`, etc., if a repository has a short name set.
This primarily affects CLI commands (like `bin/repository`) and Conduit API calls. It has no normal user-facing impact.
Test Plan: Ran `bin/repository update bread` and such.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D14988
Summary:
Via HackerOne. The use of `$key` here should be `$extended_key`.
Exploiting this requires a very unusual group of objects to be subjected to extended policy checks. I believe there is no way to actually get anything bad through the policy filter today, but this could have been an issue in the future.
Test Plan:
- Added a unit test which snuck something through the policy filter.
- Fixed use of `$extended_key`.
- Test now passes.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14993
Summary:
Fixes T7938.
- Primarily, users can currently shoot themselves in the foot by putting `../../etc/passwd` and other similar nonsense in these fields (this is not dangerous, but also does not work). Require sensible names.
- Enforce uniqueness so these names can be used in URIs and as identifiers in the future.
- (This doesn't start actually using them for anything fancy yet.)
Test Plan:
- Gave several repositories clone names: a valid name, two duplicate names, an invalid, name, some with no names.
- Ran migrations.
- Got clean conversion for valid names, appropriate errors for invalid/duplicate names.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7938
Differential Revision: https://secure.phabricator.com/D14986
Summary:
If you try to pull the hovercard of something you can no longer see (maybe you loaded the page, then the policy changed) there won't be a value in the array here.
(The rest of the code anticipates this possibility.)
Test Plan: Hovered some stuff.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14987
Summary: See Q266.
Test Plan: Created a bulk job, clicked "Details" instead of "Confirm", clicked "Continue" to get back to confirmation dialog.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14985
Summary:
Ref T5155. Swaps Phabricator over to the new first-party S3 client using the v4 authentication API so it works in all regions.
The API requires an explicit region, so the new `amazon-s3.region` is now required. I'll write guidance about this.
Test Plan:
- Uploaded files to S3.
- Migrated ~1GB of files to S3.
- Loaded a bunch of files off S3.
- Browsed around the S3 bucket.
- Deleted a file, verified the data on S3 was destroyed.
- Hit new setup warning.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5155
Differential Revision: https://secure.phabricator.com/D14982
Summary: Ref T10110. If an image had `width` or `height`, we would accidentally not give it an `$image_class`.
Test Plan:
{F1057988}
{F1057989}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10110
Differential Revision: https://secure.phabricator.com/D14983
Summary: Ref T9828. Mostly just does a minor modernization pass, but also doesn't migrate chunked files since it's not meaningful (they don't have data, directly).
Test Plan: Ran `bin/files migrate` with various flags. Migrated S3 -> Blob and Blob -> S3.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9828
Differential Revision: https://secure.phabricator.com/D14981
Summary:
Ref T8612. If a change affects more than 10K paths + hunks, tell the user it's too big and don't bother trying to write it. We're mostly bounded by INSERTs here.
Also, fix an issue with file upload errors. The keys are real PHP constants, but were accidentally converted to strings in D12797, causing every error to show as "unknown error".
Test Plan: {F1057509}
Reviewers: joshuaspence
Reviewed By: joshuaspence
Maniphest Tasks: T8612
Differential Revision: https://secure.phabricator.com/D14977
Summary: I missed this in the recent icon customziation thing.
Test Plan: Typehaead'ed some projects, saw icons properly.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14975
Summary:
Ref T10010. Ref T5819. General alignment of the stars:
- There were some hacks in Conduit around stripping `fa-...` off icons when reading and writing that I wanted to get rid of.
- We probably have room for a subtitle in the new heavy nav, and using the icon name is a good starting point (and maybe good enough on its own?)
- The project list was real bad looking with redundant tag/names, now it is very slightly less bad looking with non-redundant types?
- Some installs will want to call Milestones something else, and this gets us a big part of the way there.
- This may slightly help to reinforce "tag" vs "policy" vs "group" stuff?
---
I'm letting installs have enough rope to shoot themselves in the foot (e.g., define 100 icons). It isn't the end of the world if they reuse icons, and is clearly their fault.
I think the cases where 100 icons will break down are:
- Icon selector dialog may get very unwieldy.
- Query UI will be pretty iffy/huge with 100 icons.
We could improve these fairly easily if an install comes up with a reasonable use case for having 100 icons.
---
The UI on the icon itself in the list views is a little iffy -- mostly, it's too saturated/bold.
I'd ideally like to try either:
- rendering a "shade" version (i.e. lighter, less-saturated color); or
- rendering a "shade" tag with just the icon in it.
However, there didn't seem to be a way to do the first one right now (`fa-example sh-blue` doesn't work) and the second one had weird margins/padding, so I left it like this for now. I figure we can clean it up once we build the thick nav, since that will probably also want an identical element.
(I don't want to render a full tag with the icon + name since I think that's confusing -- it looks like a project/object tag, but is not.)
Test Plan:
{F1049905}
{F1049906}
Reviewers: chad
Reviewed By: chad
Subscribers: 20after4, Luke081515.2
Maniphest Tasks: T5819, T10010
Differential Revision: https://secure.phabricator.com/D14918
Summary:
Fixes T9323. Two minor fixes:
- On the first commit, don't render a downward line.
- Clean up a 1px spacing issue that had cropped up a while ago when we added icons or something, I think.
Test Plan:
Before:
{F1057248}
After:
{F1057249}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9323
Differential Revision: https://secure.phabricator.com/D14974
Summary:
Fixes T9319. Proxied requests (e.g., in the cluster) for binary files (like images) currently fail because we can not return binary data over Conduit in JSON.
Although Conduit will eventually support binary-safe encodings, a cleaner approach to this is just to return a `filePHID` instead of the raw content. This is generally faster and more flexible, and gives us more opportunities to add caching later.
After making the call, the client pulls the file data separately.
We also no longer need to return a complex data structure because we don't do blame over this call any longer.
Test Plan:
- Viewed images in Diffusion.
- Viewed READMEs in Diffusion.
- Used `bin/differential attach-commit rX Dy` to hit attach pathway.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9319
Differential Revision: https://secure.phabricator.com/D14970
Summary: Ref T9319. Ref T2783. This won't currently work in a future environment where daemons and repositories are not on the same host. Send it over Conduit instead.
Test Plan: Used `bin/differential attach-commit rX Dy` to force attachment, saw valid content pull over Conduit.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2783, T9319
Differential Revision: https://secure.phabricator.com/D14969
Summary:
Ref T9319. See D14967. As before, this is making a deeply-buried, complex operation easier to test by providing a CLI command.
This adds `bin/differential attach-commit rXnnnn Dnnnn` to pretend that `rXnnnn` was just committed and matched `Dnnnn`.
Test Plan:
- Ran `bin/differential attach-commit X Y` for several different values, saw updates in the UI.
- Faked the message parser to make sure stuff still worked there.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9319
Differential Revision: https://secure.phabricator.com/D14968
Summary: Fixes T9701. I don't want to try to autofix this because destroying the directory could destroy important files, but we can improve the error message.
Test Plan: Faked a failure, ran `repository update X`, got a more tailored error message.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9701
Differential Revision: https://secure.phabricator.com/D14971
Summary:
The old treatment was fairly technical. Give this UI a more human-friendly flow:
- Use language "remove" instead of "disable". We keep the record that the card existed around for auditing/historical purposes, but it is no longer a valid payment method going forward and can not be undone. I think this aligns with user expectation and actual behavior better than "disable".
- Only show active methods on the profile screen.
Test Plan: {F1057153}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14973
Summary:
Ref T9319. When we discover a commit, we sometimes update the corresponding revision with a "this is the actual committed change" diff and send out a link to the changes between review and commit.
This is currently very difficult to test, because it only happens the first time and you have to either go set up a bunch of objects or add a bunch of special casing to the parser to hit the workflow.
I'm making some changes to how it pulls file content. To make those changes easier to test, first start extracting this stuff so the code can be run with `bin/differential extract ...` instead of needing to do a bunch of more complicated setup steps.
Test Plan:
- Ran `bin/differential extract ...` to extract diffs from commits.
- Forced my way through the daemon workflow by faking out a bunch of flags, got a clean extract + attach + update. After this patch, this should rarely be necessary.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9319
Differential Revision: https://secure.phabricator.com/D14967
Summary: I was looking at some random un-revisioney repository for most of my testing and missed these.
Test Plan: Viewed blame of a file with some revisions.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14965
Summary: Fixes T2450. If we spend more than 15 seconds in blame, just cut it off.
Test Plan:
- Changed timeout to 0.01 seconds.
- Did blame on a non-highlighted file, got no blame, saw warning.
- Did blame on a highlighted file, got no blame.
- Note: you don't get a warning here because of Ajax stuff. It'd be kind of tricky to add and doesn't seem like a big deal so I'm planning to leave it as-is for now.
Reviewers: chad
Reviewed By: chad
Subscribers: 20after4, chasemp
Maniphest Tasks: T2450
Differential Revision: https://secure.phabricator.com/D14964
Summary:
Ref T2450. This reorganizes code to improve performance.
Mostly, there are a lot of things which are unique per commit (author name, links, short name, etc), but we were rendering them for every line.
This often meant we'd render the same author's name thousands of times. This is slower than rendering it only once.
In 99% of interfaces this doesn't matter, but blame is weird and it's significant on big files.
Test Plan:
Locally, `__phutil_library_map__.php` now has costs of roughly:
- 550ms for main content (from 650ms before the patch).
- 1,500ms for blame content (frrom 1,800ms before the patch).
So this isn't huge, is a decent ~20%-ish performance gain for shuffling some stuff around.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2450
Differential Revision: https://secure.phabricator.com/D14963
Summary:
Ref T2450. File blame tends to have the same commit a lot of times, and we don't do lookups like this efficiently right now.
In particular, for a file like `__phutil_library_map__.php`, we would issue a query with ~9,000 clauses like this:
```
(repositoryID = 1 AND commitIdentifier LIKE "XYZ%")
```
...but only a few hundred of those identifiers were unique. Instead, issue only one clause per unique identifier.
MySQL also seems to do a little better on "commitIdentifier = X" if we have the full hash, so special case that slightly.
Test Plan:
- Issuing a query for only unique identifiers dropped the cost from 400ms to 100ms locally.
- Swapping to `=` if we have the full hash dropped the cost from 100ms to 75ms locally.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2450
Differential Revision: https://secure.phabricator.com/D14962
Summary:
Fixes T4366. Two years ago, Facebook put 16,000 files in a directory. Today, the page has nearly loaded.
Paginate large directories.
Test Plan:
- Viewed home and browse views in Git, Mercurial and Subversion.
I put an artificially small page size (5) on home:
{F1055653}
I pushed 16,000 files to a directory and paged through them. Here's the last page, which rendered in about 200ms:
{F1055655}
Our behavior is a bit better than GitHub here, which shows only the first 1,000 files, disables pagination, and can't retrieve history for the files:
{F1055656}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4366
Differential Revision: https://secure.phabricator.com/D14956
Summary: Make sure to subclass the right controller on badges.
Test Plan: arc liberate, make a custom badges edit form.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14961
Summary:
When looking at a large file in Diffusion:
- disable highlighting if it's huge and show a note about why;
- pick up a few other optimizations.
Test Plan: Locally, this improves the main render of `__phutil_library_map__.php` from 3,200ms to 600ms for me, at the cost of syntax highlighting (we can eventually add view options and let users re-enable it).
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14959
Summary:
Ref T2450. Ref T9319. This is still a bit messy, but not quite so bad as it was: instead of using a single call to get both blame information and file content, use `diffusion.blame` for blame information.
This will make optimizations to both blame and file content easier.
Test Plan: Viewed a bunch of blame (color on/off, blame on/off).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2450, T9319
Differential Revision: https://secure.phabricator.com/D14958
Summary:
Fixes T2451. Several motivations here, from strongest to weakest:
- Currently, getting blame and file content are closely entwined. This makes fixing T9319 more difficult, and I want to fix it. I want to separate blame from content so there's more flexibility in how we approach this issue.
- This makes pursuing T2450 easier, if it turns out to be a meaningful win.
- If we can get a win on blame performance, we can do `arc blame` eventually if we want.
Test Plan:
- Blamed in SVN, Git and Mercurial.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2451
Differential Revision: https://secure.phabricator.com/D14957
Summary:
Fixes T10089. This did work at one point, but was broken by D12868, which got too aggressive about mailing members.
We don't want to send mail to all members by default, only those who are subscribed. The parent implementation of `getMailCC()` handles this for us.
Test Plan:
Joined a project as users A and B. Unsubscribed with B. Made an edit.
Before patch: both A and B got mail. After patch: only A got mail.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10089
Differential Revision: https://secure.phabricator.com/D14955
Summary: Adds a basic HeraldAdapter to Phame Blogs and Posts.
Test Plan: Make a Herald rule to CC me on new posts or blogs automatically.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14897
Summary: Fixes T9191. This is pretty fluff but doesn't hurt anything, I guess.
Test Plan: Viewed repository list, saw an importing repository get a little icon.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9191
Differential Revision: https://secure.phabricator.com/D14950
Summary: Ref T4245. This is the last of it, and covers the clone/push stuff.
Test Plan:
- Cloned git.
- Pushed git.
- Cloned mercurial.
- Pushed mercurial.
- Visited a `blah.git` URL in my browser just because; got redirected to a human-facing UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D14949
Summary: Ref T4245. On their best day these don't work all that well, but I'm pretty sure I didn't make anything worse.
Test Plan:
- Viewed global lint.
- Viewed lint for a repository.
- Viewed lint details for a particular message.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D14948
Summary: Ref T4245. This gets everything else except serving HTTP requests (complicated) and lint (quite weird).
Test Plan:
- Viewed a diff.
- Viewed externals.
- Viewed history table to see last modified.
- Did path completion and validation in Owners.
- Did tree path search in Diffusion.
- Viewed a repository.
- Created a new repository.
- Looked up symbols.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D14947
