Summary: See PHI1017. This is a trivial fix even though these burnups are headed toward a grisly fate.
Test Plan: Moused over some January datapoints, saw "1" instead of "0".
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19967
Summary:
Ref T13222. In D19918, I refactored how timelines get "view data". Today, this is always additional data about which images/changesets/diffs are visible on the current revision/commit/mock, so we can tell if inline comments should be linked to a `#anchor` on the same page (if the inline is rendered there somewhere) or to a `/D123?id=1&vs=2` full link on a different page (if it isn't), but in general this could be any sort of state information about the current page that affects how the timeline should render.
Previously, comment previews did not use any specialized object code and always rendered a "generic" timeline story. This was actually a bug, but none of the code we have today cares about this (since it's all inline related, and inlines render separately) so it never impacted anything.
After the `TimelineEngine` change, the preview renders with Differential-specific code. This is more correct, but we were not passing the preview the "view data" so it broke.
This preview doesn't actually need the view data and we could just make it bail out if it isn't present, but pass it through for consistency and so this works like we'd expect if we do something fancier with view data in the future.
Test Plan: Viewed comment and inline comment previews in Differential, saw old behavior restored.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19943
Summary:
Depends on D19914. Ref T11351. Some of the Phoilo rabbit holes go very deep.
`PhabricatorApplicationTransactionInterface` currently requires you to implement `willRenderTimeline()`. Almost every object just implements this as `return $timeline`; only Pholio, Diffusion, and Differential specialize it. In all cases, they are specializing it mostly to render inline comments.
The actual implementations are a bit of a weird mess and the way the data is threaded through the call stack is weird and not very modern.
Try to clean this up:
- Stop requiring `willRenderTimeline()` to be implemented.
- Stop requiring `getApplicationTransactionViewObject()` to be implemented (only the three above, plus Legalpad, implement this, and Legalpad's implementation is a no-op). These two methods are inherently pretty coupled for almost any reasonable thing you might want to do with the timeline.
- Simplify the handling of "renderdata" and call it "View Data". This is additional information about the current view of the transaction timeline that is required to render it correctly. This is only used in Differential, to decide if we can link an inline comment to an anchor on the same page or should link it to another page. We could perhaps do this on the client instead, but having this data doesn't seem inherently bad to me.
- If objects want to customize timeline rendering, they now implement `PhabricatorTimelineInterface` and provide a `TimelineEngine` which gets a nice formal stack.
This leaves a lot of empty `willRenderTimeline()` implementations hanging around. I'll remove these in the next change, it's just going to be deleting a couple dozen copies of an identical empty method implementation.
Test Plan:
- Viewed audits, revisions, and mocks with inline comments.
- Used "Show Older" to page a revision back in history (this is relevant for "View Data").
- Grepped for symbols: willRenderTimeline, getApplicationTransactionViewObject, Legalpad classes.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T11351
Differential Revision: https://secure.phabricator.com/D19918
Summary:
Ref T13216. See PHI985. When you click a line number to start an inline comment, we intend to initiate the action only if you used the left mouse button (desktop) or a touch (tablet/device).
We currently have a `not right` condition for doing this, but it only excludes right clicks, not middle clicks (or other nth-button clicks). The `not right` condition was sligthly easier to write, but use an `is left` condition instead of a `not right` condition.
Test Plan:
- In Safari, Firefox and Chrome:
- Used left click to start an inline.
- Used middle click to do nothing (previously: started an inline).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13216
Differential Revision: https://secure.phabricator.com/D19836
Summary:
See PHI975. Ref T13216. Ref T2543. Previously, see D19204 and PHI433.
When you're acting on a draft revision, we change the button text to "Submit Quietly" as a hint that your actions don't generate notifications yet.
However, this isn't accurate when one of your actions is "Request Review", which causes the revision to publish.
Allow actions to override the submit button text, and make the "Request Review" action change the button text to "Publish Revision".
The alternative change I considered was to remove the word "Quietly" in all cases.
I'm not //thrilled// about how complex this change is to adjust one word, but the various pieces are all fairly clean individually. I'm not sure we'll ever be able to use it for anything else, but I do suspect that the word "Quietly" was the change in D19204 with the largest effect by far (see T10000).
Test Plan:
- Created a draft revision. Saw "Submit Quietly" text.
- Added a "Request Review" action, saw it change to "Publish Revision".
- Reloaded page, saw stack saved and "Publish Revision".
- Removed action, saw "Submit Quietly".
- Repeated on a non-draft revision, button stayed put as "Submit".
- Submitted the various actions, saw them have the desired effects.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13216, T2543
Differential Revision: https://secure.phabricator.com/D19810
Summary:
See <https://hackerone.com/reports/434116>. Slowvote has a piece of Javascript that attempts to let you vote on `{V123}` polls inline.
It does not work: nothing ever triggers it (nothing renders a control with a `slowvote-option` sigil).
At least for now, just remove it. It has a completely separate pathway in the controller and both pathways are buggy, so this makes fixing them easier.
Test Plan: Voted in plurality and approval polls via Slowvote and the embedded widget.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19773
Summary: See PHI871. Ref T13197. These sections are only divided visually and don't have textual headers. Add aural headers.
Test Plan: {F5875471}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13197
Differential Revision: https://secure.phabricator.com/D19654
Summary:
Depends on D19594. See PHI823. Ref T13164.
- Add a label for the "X" button in comment areas, like "Remove Action: Change Subscribers".
- Add a label for the floating header display options menu in Differential.
- Add `role="button"` to `PHUIButtonView` objects that we render with an `<a ...>` tag.
Test Plan:
Viewed a revision with `?__aural__=true`:
- Saw "Remove Action: ..." label.
- Saw "Display Options" label.
- Used inspector to verify that some `<a class="button" ...>` now have `<a class="button" role="button" ...>`. This isn't exhaustive, but at least improves things. A specific example is the "edit", "reply", etc., actions on inline comments.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19595
Summary:
Ref T13164. See PHI748. Path validation has a 750ms timeout which blames to rP5038ab850c, in 2011.
Production path validation is sometimes taking more than 750ms, particularly on the initial page load where we may validate many paths simultaneously.
I have no idea why we have this timeout, and it isn't consistent with how we perform other AJAX requests. Just remove it.
Test Plan:
- Reproduced issue in production, saw all validation calls failing at 750ms. Actual underlying calls succeed, they just take more than 750ms to resolve.
- Loaded path validator locally, got green checkmark.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19575
Summary:
Ref T13164. See PHI693. In Differential, you can {nav View Options > View Standalone} to get a standalone view of a single changeset. You can also arrive here via the big changeset list for revisions affecting a huge number of files.
We currently suggest that all the keyboard shortcuts work, but some do not. In particular, the "Next File" and "Previous File" keyboard shortcuts (and some similar shortcuts) do not work. In the main view, the next/previous files are on the same page. In the standalone view, we'd need to actually change the URI.
Ideally, we should do this (and, e.g., put prev/next links on the page). As a first step toward that, hide the nonfunctional shortcuts to stop users from being misled.
Test Plan:
- Viewed a revision in normal and standalone views.
- No changes in normal view, and all keys still work ("N", "P", etc).
- In standalone view, "?" no longer shows nonfunctional key commands.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19571
Summary: Ref T13151. See PHI616. There's a bug where the current banner changeset isn't cleared correctly when we hide the banner.
Test Plan:
- View revision with several changesets.
- Scroll down slowly through first changeset until banner appears.
- Scroll up until banner disappears.
- Scroll back down.
- Before: banner fails to reappear (code still thinks it's visible and we don't want to update it).
- After: banner reappears correctly.
Reviewers: amckinley, jmeador
Reviewed By: jmeador
Maniphest Tasks: T13151
Differential Revision: https://secure.phabricator.com/D19474
Summary:
See PHI604. Ref T13130. Ref T13105. There's currently no way to turn blame off in Diffusion. Add a "Hide Blame" option to the "View Options" dropdown so it can be toggled off.
Also fix a couple of bugs around this: for example, if you loaded a Jupyter notebook and then switched to "Source" view, blame would incorrectly fail to activate because the original rendering of the "stage" used an asynchronous engine so `willRenderRef()` wasn't called to populate blame.
Test Plan:
- Viewed a source file, toggled blame off/on, reloaded page to see state stick in URL.
- Viewed a Jupyter notebook, toggled to "Source" view, saw blame.
- Viewed stuff in Files (no blame UI options).
- Tried to do some invalid stuff like toggle blame on a non-blame engine (options disable properly).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13130, T13105
Differential Revision: https://secure.phabricator.com/D19414
Summary:
Ref T13130. See PHI617.
The new build log UI has tags like `<a href="...">Show More Above <span icon>^</span></a>`. If you click the little "^" icon, the event target is the `<span />` instead of the `<a />` so we expand on the wrong node.
Instead, select the `<a />` by sigil explicitly.
Test Plan: Viewed new log UI in Harbormaster, clicked "^" icon and text, got the same (correct) behavior on both.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13130
Differential Revision: https://secure.phabricator.com/D19410
Summary:
Depends on D19377. Ref T13125. Ref T13124. Ref T13105. Coverage reporting in Diffusion didn't initially survive the transition to Document Engine; restore it.
This adds some tentative/theoretical support for multiple columns of coverage, but no way to actually produce them in the UI. For now, the labels, codes, and colors are hard coded.
Test Plan:
Added coverage with `diffusion.updatecoverage`, saw coverage in the UI:
{F5525542}
Hovered over coverage, got labels and highlighting.
Double-checked labels for "N" (Not Executable) and "U" (Uncovered). See PHI577.
Faked some multi-column coverage, but you can't currently get this yourself today:
{F5525544}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13125, T13124, T13105
Differential Revision: https://secure.phabricator.com/D19378
Summary: Ref T13105. After moving Diffusion to DocumnentEngine, this no longer has callers. It will become part of the document behavior.
Test Plan: Grepped for calls to the `diffusion-browse-file` behavior, found none.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19377
Summary:
Depends on D19349. Ref T13105. This was the behavior in Diffusion before with a little hard-coded snippet.
Remove that snippet ("diffusion-jump-to") and add a more general-purpose snippet to SourceView.
This is a tiny bit hacky still (and probably doesn't work quite right with Quicksand) but gets things working again and works in all of Files, Paste, and Diffusion.
Test Plan: Followed links to particular lines in Paste, Files and Diffusion; got scrolled to the right place.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19350
Summary:
Depends on D19313. Ref T13105. Fixes T13015. We lost the coloration for ages in the switch to Document Engine.
Restore it, and use a wider range of colors to make the information more clear.
Test Plan: Viewed some blame, saw a nice explosion of bright colors. This is a cornerstone of good design.
Maniphest Tasks: T13105, T13015
Differential Revision: https://secure.phabricator.com/D19314
Summary:
Depends on D19312. Ref T13105. For readability, render only one link for each contiguous block of changes.
Also make the actual rendering logic a little more defensible.
Test Plan: Viewed some files with blame, saw one render per chunk instead of one per line.
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19313
Summary: Depends on D19311. Ref T13105. Currently, blame only renders on the initial request. Instead, redraw blame after swapping views.
Test Plan: Swapped from "Source -> Hexdump -> Source" and "Hexdump -> Source". Saw blame on source in all cases.
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19312
Summary: Ref T13105. This needs refinement but blame sort of works again, now.
Test Plan: Viewed files in Diffusion and Files; saw blame in Diffusion when viewing in source mode.
Reviewers: mydeveloperday
Reviewed By: mydeveloperday
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19309
Summary: Ref T13105. Ref T13047. This makes symbol indexes work with DocumentEngine in Files, and restores support in Diffusion.
Test Plan: Command-clicked stuff, got taken to the symbol index with reasonable metadata in Diffusion, Differential and Files.
Reviewers: mydeveloperday
Reviewed By: mydeveloperday
Maniphest Tasks: T13105, T13047
Differential Revision: https://secure.phabricator.com/D19307
Summary: Depends on D19273. Ref T13105. Adds "Change Text Encoding..." and "Highlight As..." options when rendering documents, and makes an effort to automatically detect and handle text encoding.
Test Plan:
- Uploaded a Shift-JIS file, saw it auto-detect as Shift-JIS.
- Converted files between encodings.
- Highlighted various things as "Rainbow", etc.
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19274
Summary:
Depends on D19258. Ref T13105.
- When the default renderer is an Ajax renderer, don't replace the URI. For example, when viewing a Jupyter notebook, the URI should remain `/F123`, not instantly change to `/view/123/jupyter/`.
- Fix an issue where non-ajax renderers could fail to display the dropdown menu properly.
Test Plan:
- Viewed a Jupyter notebook, stayed on the same URI.
- Changed rendering, got different URIs.
- Viewed a JSON file and toggled renderers via dropdown.
Reviewers: mydeveloperday
Reviewed By: mydeveloperday
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19259
Summary:
Ref T13105. This adds various small client-side improvements to document rendering.
- In the menu, show which renderer is in use.
- Make linking to lines work.
- Make URIs persist information about which rendering engine is in use.
- Improve the UI feedback for transitions between document types.
- Load slower documents asynchronously by default.
- Discard irrelevant requests if you spam the view menu.
Test Plan: Loaded files, linked to lines, swapped between modes, copy/pasted URLs.
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19256
Summary:
Depends on D19238. Ref T13105. Give document engines some reasonable automatic support for degrading gracefully when someone tries to hexdump a 100MB file or similar.
Also, make "Video" sort above "Audio" for files which could be rendered either way.
Test Plan: Viewed audio, video, image, and other files. Adjusted limits and saw full, partial, and fallback/error rendering.
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19239
Summary: Depends on D19237. Ref T13105. This adds a (very basic) "Hexdump" engine (mostly just to have a second option to switch to) and a selector for choosing view modes.
Test Plan: Viewed some files, switched between audio/video/image/hexdump.
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19238
Summary:
See <https://discourse.phabricator-community.org/t/desktop-only-notifications-mode-is-broken/1234>. Ref T13102. The "Desktop Only" mode for notifications currently shows both desktop and web notifications.
In fact, `JX.Notification` currently has no ability to render notifications as desktop-only. Make this work.
Note that many of the variables and parameters here, including `showAnyNotification`, `web_ready`, and `desktop_ready`, are named in an incorrect or misleading way. However, the new behavior appears to be correct.
Test Plan:
- Emitted test notifications in "No Notifications", "Web Only", "Web and Desktop", and "Desktop" modes.
- Saw appropriate notifications appear in the UI.
Maniphest Tasks: T13102
Differential Revision: https://secure.phabricator.com/D19233
Summary:
Ref T13102. An install has a custom rule for bridging JIRA references via Doorkeeper and would like to be able to render them as `JIRA-123` instead of `JIRA JIRA-123 Full JIRA title`.
I think it's reasonable to imagine future support upstream for `JIRA-123`, `{JIRA-123}`, and so on, although we do not support these today. We can take a small step toward eventual support by letting the rendering pipeline understand different view modes.
This adds an optional `name` (the default text rendered before we do the OAuth sync) and an optional `view`, which can be `short` or `full`.
Test Plan:
I tested this primarily with Asana, since it's less of a pain to set up than JIRA. The logic should be similar, hopefully.
I changed `DoorkeeperAsanaRemarkupRule` to specify `name` and `view`, e.g `'view' => (mt_rand(0, 1) ? 'short' : 'full')`. Then I made a bunch of Asana references in a comment and saw them randomly go short or long.
Maniphest Tasks: T13102
Differential Revision: https://secure.phabricator.com/D19215
Summary: Depends on D19190. Fixes T12590. Ref T13099. Replaces the barely-usable, gigantic, poorly ordered "<select />" control with a tokenizer. Attempts to fix various minor issues.
Test Plan:
- Edited paths: include/exclude paths, from different repositories, different actual paths.
- Used "Add New Path" to add rows, got repository selector prepopulated with last value.
- Used "remove".
- Used validation typeahead, got reasonable behaviors?
The error behavior if you delete the repository for a path is a little sketchy still, but roughly okay.
Maniphest Tasks: T13099, T12590
Differential Revision: https://secure.phabricator.com/D19191
Summary: Ref T12590. This is ancient code which was used to prefill `/trunk/tfb/www/` or similar at Facebook. I don't think it ever had a UI and no install has asked for this feature since 2011.
Test Plan: Grepped for affected symbols, edited paths in Owners.
Maniphest Tasks: T12590
Differential Revision: https://secure.phabricator.com/D19189
Summary:
Depends on D19183. Ref T11015. Currently, adding a trailing slash works great and omitting it mysteriously doesn't work.
Store a normalized version with an unconditional trailing slash for the lookup logic to operate on, and a separate display version which tracks what the user actually typed.
Test Plan:
- Entered "/src/main.c", "/src/main.c/", saw them de-duplicate.
- Entered "/src/main.c", saw it stay that way in the UI but appear as "/src/main.c/" internally.
- Added a rule for "/src/applications/owners" (no slash), created a revision touching paths in that directory, saw Owners fire for it.
- Changed the display value of a path only ("/src/main.c" to "/src/main.c/"), saw the update reflected in the UI without any beahvioral change.
Maniphest Tasks: T11015
Differential Revision: https://secure.phabricator.com/D19184
Summary:
Depends on D19166. Ref T13088. When the user scrolls away from a followed log, break the focus lock.
Let users stop following a live log.
Show when lines are added more clearly.
Don't refresh quite as quickly give users a better shot at clicking the stop button.
These behaviors can probably be refined but are at least more plausible and less actively user-hostile than the first version of this behavior was.
Test Plan: Used `write-log --rate` to write a large log slowly. Clicked "Follow Log", followed for a bit. Scrolled away, still got live updates but no more scroll lock. Clicked stop, no more updates.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19167
Summary:
Depends on D19162. Ref T13088. When a user links to `$1234`, we need to render a default view of the log with a piece at the head, a piece at the end, and a piece in the middle.
We also need to figure out the offset for line 1234, or multiple offsets for "1234-2345".
Since the logic views/reads mostly anticipated this it isn't too much of a mess, although there are a couple of bugs this exposes with view specifications that use combinations of parameters which were previously impossible.
Test Plan: Viewed a large log with no line marker. Viewed `$1`. Viewed `$end`. Viewed `$35-40`, etc. Expanded context around logs.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19163
Summary: Depends on D19152. Ref T13088. This adds live log tailing. It is probably not the final version of this feature because it prevents escape once you begin tailing a log.
Test Plan: Used `bin/harbormaster write-log --rate ...` to write a log slowly. Viewed it in the web UI. Clicked "Follow Log". Followed the log until the write finished, a lifetime later.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19153
Summary:
Depends on D19141. Ref T13088. Some of the fundamental log behaviors like "loading the correct rows" are now a bit better behaved.
The UI is a little less garbage, too.
Test Plan: Viewed some logs and loaded more context by clicking the buttons.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19142
Summary: Depends on D19139. Ref T13088. This doesn't actually work, but is close enough that a skilled attacker might be able to briefly deceive a small child.
Test Plan:
- Viewed some very small logs under very controlled conditions, saw content.
- Larger logs vaguely do something resembling working correctly.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19141
Summary: Fixes T13080. The banner wasn't properly included in the sleep/wake logic.
Test Plan:
Mentioned `Dxxx` on a task. Enabled persistent chat to activate Quicksand. Reloaded page. Clicked `Dxxx`. Scrolled down until a changeset header appeared. Pressed back button.
- Before patch: ended up on task, with header still around.
- After patch: ended up on task, with header properly vanquished.
Pressed "forward", ended up back on the revision with the header again.
Maniphest Tasks: T13080
Differential Revision: https://secure.phabricator.com/D19086
Summary: See PHI356. Adds inline comment and done counts to the filetree. Also makes the filetree wider by default.
Test Plan: Fiddled with filetrees in different browsers on different revisions. Added inlines, marked them done/undone.
Differential Revision: https://secure.phabricator.com/D19041
Summary:
Depends on D18939. Ref T13047. Symbol lookup can be activated from a diff (in Differential or Diffusion) or from the static view of a file at a particular commit.
In the latter case, we need to figure out the path a little differently. The character and line number approaches still work as written.
Test Plan:
- Command-clicked symbols in the Diffusion browse view with blame on and off; saw path, line and char populate properly.
- Command-clicked symbols in Differential diff view to check I didn't break anything.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13047
Differential Revision: https://secure.phabricator.com/D18940
Summary: Depends on D18937. Ref T13047. When available, provide character positions so external indexers can return more accurate results.
Test Plan: Clicked symbols in Safari, Firefox and Chrome, got sensible-looking character positions.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13047
Differential Revision: https://secure.phabricator.com/D18939
Summary:
Ref T13047. In some reasonable cases, knowing the path and line number where a symbol appears is useful in ranking or filtering the set of matching symbols.
Giving symbol sources more information can't hurt, and it's generally free for us to include this context since we just need to grab it out of the document and pass it along.
We can't always get this data (for example, if a user types `s idx` into global search, we have no clue) but this is similar to other types of context which are only available sometimes (like which repository a symbol appears in).
Test Plan: Command-clicked some symbols in 1-up (unified) and 2-up (side-by-side) diff views with symbol indexes configured. Got accurate path and line information in the URI I was redirected to.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13047
Differential Revision: https://secure.phabricator.com/D18936
Summary:
See PHI173. Currently, Herald has an "Assign to" action for tasks, and you can specify custom fields with datasource values (like users or projects) that have a limit (like 1 "Owner", or 12 "Jury Members").
Herald doesn't support these limits right now, so you can write `[ Assign to ][ X, Y, Z ]`. This just means "Assign to X", but make it more clear by actually enforcing the limit in the UI.
Test Plan:
- Created a "projects" custom field with limit 1.
- Tried to create actions that 'assign to' or 'set custom field to' more than one thing, got helpfully rebuffed by the UI.
- Created an "add subscribers" action with more than one value.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18887
Summary:
Depends on D18862. See PHI173. Ref T13025. Fixes T10005. This redefines bulk edits in terms of EditEngine fields, rather than hard-coding the whole thing.
Only text fields -- and, specifically, only the "Title" field -- are supported after this change. Followup changes will add more bulk edit parameter types and broader field support.
However, the title field now works without any Maniphest-specific code, outside of the small amount of binding code in the `ManiphestBulkEditor` subclass.
Test Plan: Used the bulk edit workflow to change the titles of tasks.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025, T10005
Differential Revision: https://secure.phabricator.com/D18863
Summary:
Depends on D18805. Ref T13025. Fixes T10268.
Instead of using a list of IDs for the bulk editor, power it with SearchEngine queries. This gives us the full power of SearchEngine and lets us use a query key instead of a list of 20,000 IDs to avoid issues with URL lengths.
Also, split it into a base `BulkEngine` and per-application subclasses. This moves us toward T10005 and universal support for bulk operations.
Also:
- Renames most of "batch" to "bulk": we're curently inconsitent about this, I like "bulk" better since I think it's more clear if you don't regularly interact with `.bat` files, and newer stuff mostly uses "bulk".
- When objects in the result set can't be edited because you don't have permission, show the status more clearly.
This probably breaks some stuff a bit since I refactored so heavily, but it seems mostly OK from poking around. I'll clean up anything I missed in followups to deal with remaining items on T13025.
Test Plan:
{F5302300}
- Bulk edited from Maniphest.
- Bulk edited from a workboard (no more giant `?ids=....` in the URL).
- Hit most of the error conditions, I think?
- Clicked the "Cancel" button.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025, T10268
Differential Revision: https://secure.phabricator.com/D18806
Summary:
See PHI242. All use cases for this that I know of are pretty hacky, but they don't seem perilous, and it's easier than webhooks.
See P1895, T10183, and T9853 for me previously refusing to implement this since all those use cases were also pretty bad.
Test Plan:
- Wrote a rule to add comments, saw it add comments.
- Reviewed summary, re-edited rule, reviewed transcript to check that all the strings worked OK.
- Wrote a new rule for a non-commentable object (a blog) to make sure I wasn't offered the "Add a comment" action.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18823
Summary:
See PHI180. Currently, if you begin creating or editing an inline and then swap display modes (for example, with "View Unified"), your edit is lost.
Persisting the editor state is complicated and this is very rare, so just prevent the action and warn the user instead.
Also make the warning persist for a little longer since a few of the messages, including this one, take a couple seconds to read now.
Test Plan:
- Edited a comment, tried to swap display modes, got a warning.
- Swapped display modes normally with no comment being edited.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18774
Summary:
See PHI185. When looking at a revision, you can Command-Click (Mac) symbols to jump to their definitions (provided the symbol index has been built).
Currently, the code works on any node inside the changeset list, so it activates when clicking links inside inline comments and opening them in a new window.
To avoid this, don't activate if we're inside an inline comment. This technically prevents you from doing a symbol lookup on a symbol inside a codeblock inside an inline, but that seems fine/reasonable.
Test Plan: Wrote `Dxxx` in an inline, command-clicked it. Before: got a symbol lookup. After: just a new tab with the revision.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18753
Summary: Noticed a couple of typos in the docs, and then things got out of hand.
Test Plan:
- Stared at the words until my eyes watered and the letters began to swim on the screen.
- Consulted a dictionary.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, yelirekim, PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D18693
Summary:
Fixes T12979. In D18457, we added a "No Notifications" setting to let users disable the blue and yellow pop-up notifications that alert you when an object has been updated, since some users found them distracting.
However, the change made "do nothing" the default, so all other `JX.Notification` callsites -- which never pass a preference -- were effectively turned off no matter what your setting was set to. This includes the "Read-Only" mode warning (grey), the "High Security" mode warning (purple), the "timezone" warning, and a few others.
Tweak things a little bit so the setting applies to ONLY blue and yellow ("object you're following was updated" / "this object was updated") notifications, not other types of popup notifications.
Test Plan:
- With notifications on in settings, got blue notifications and "Read-only".
- With notifications off in settings, got "Read-only" but no blue notifications.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12979
Differential Revision: https://secure.phabricator.com/D18600
Summary:
Ref T12970. See PHI43. Currently, the "Show Older Comments" link gets auto-clicked if the user visits **any** anchor. This is not correct.
Instead, only auto-click it if the user visits a numeric anchor. This fixes the behavior approximately 98% of the time. See T12970 for a followup on the remaining ambiguous cases.
Test Plan:
- Viewed a revision with some folded transactions and a "Show Older Comments" link.
- Clicked a link to a file in the table of contents, with a hash like `#1234abcd`.
- Before: Timeline expanded and I ended up somewhere bad.
- After: Timeline no longer expanded.
- Manually changed hash to `#1234` (purely numeric), saw timeline expand.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12970
Differential Revision: https://secure.phabricator.com/D18458
