Summary:
- In ProjectQuery, always load the viewer's membership in the project because we need it to perform a CAN_VIEW test.
- Add storage for the view, edit and join policies.
- A user can always view a project if they are a member.
- A user can always join a project if they can edit it.
- Editing a project requires both "view" and "edit" permissions, and edit does not imply view.
- This has no effect on the application yet.
Test Plan: See next diff.
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D3219
Summary:
- Allow PolicyQuery to require specific sets of capabilities other than "CAN_VIEW", like edit, etc. The default set is "view".
- Add some convenience methods to PolicyFilter to test for capabilities.
Test Plan: Viewed pastes, projects, etc. Used other stuff in future diff.
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D3212
Summary:
I ran into a case where a commit isn't "new" but hasn't been closed. I
think the check on the status of the differential revision should be
enough and this check isn't needed.
Test Plan:
used the reparse.php script to close a revision that previously wouldn't
close.
Reviewers: epriestley, vrana
Reviewed By: vrana
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3232
Summary:
- Use @chad's nice gradient overlay icons.
- Show selected states.
- Use profile picture for profile item (not sure about this treatment?)
- Workflow the logout link
Test Plan: Will add screenshots.
Reviewers: alanh, btrahan, chad
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D3225
Summary:
Ponder is similar in spirit to the Wiki tool, but uses a Q&A
format and up/downvotes to signal user sentiment. Popular
questions are moved to the top of the feed on a 5-minute
cycle based on age (younger is better) and vote count (higher
is better).
Pre-apologies for noob diff.
Test Plan:
- `./bin/phd list` Should include `PonderHeatDaemon`; phd launch it
if necessary.
- Navigate to /ponder/ ; observe sanity when adding questions,
voting on them, and adding answers.
- Confirm that questions and answers are linkable using Q5 / Q5#A5 formatted object links.
- Confirm that searching for Ponder Questions works using built-in
search.
Feedback on code / schema / whatever organization very welcome.
Reviewers: nh, vrana, epriestley
Reviewed By: epriestley
CC: gmarcotte, aran, Korvin, starruler
Differential Revision: https://secure.phabricator.com/D3136
Summary: Apparently I am not qualified to do basic math.
Test Plan: Unit test.
Reviewers: vrana
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3218
Test Plan:
$ ./reindex_all_users.php
Search for me in open documents.
Search for @epriestley in open documents.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3216
Summary: rather than showing an erroneous "we still parsing" message.
Test Plan: for each version control system, typed in a garbage URL and got a 4oh4. (note this actually fails for SVN -- see comment about how my code fails atm -- and DiffusionGitRequest seems to pick off this error in advance and returns an AphrontUsageException.)
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1624
Differential Revision: https://secure.phabricator.com/D3201
Summary: I think this is simpler? Includes test cases.
Test Plan: Ran tests. Loaded /paste/.
Reviewers: vrana, nh
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3209
Summary:
Put the function in the base class so all the Diffusion views
can use it. Also use shinier tooltips.
Test Plan: Browse Diffusion.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3206
Summary: We managed to move enough Owners stuff aside to make this reasonable; make projects implement the policy interface and projectquery use cursor-based paging.
Test Plan:
- Grepped for ProjectQuery callsites.
- Created an audit comment.
- Used `project.query` to query projects.
- Loaded homepage.
- Viewed Maniphest task list, grouped by project.
- Viewed project list.
- Created / edited project.
- Browsed Owners.
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D3200
Summary: A cursory look at DifferentialReviewer suggests the primary reviewer doesn't actually have to be among the reviewers? Uploading this so bug reporter can patch and see if it helps.
Test Plan: Nope.
Reviewers: epriestley
Reviewed By: epriestley
CC: szymon, aran, Korvin
Maniphest Tasks: T1625
Differential Revision: https://secure.phabricator.com/D3198
Summary:
This is a step toward unearthing Project queries enough that I can make them policy-aware. Right now, some ProjectQuery callsites do not have reasonable access to the viewer. In particular, Owners packages need to issue Project queries because we allow projects to own packages and resolve project members inside of some package queries.
Currently, we have a very unmodern approach to querying packages, with a large number of one-off static load methods:
PhabricatorOwnersPackage::loadAffectedPackages()
PhabricatorOwnersPackage::loadOwningPackages()
PhabricatorOwnersPackage::loadPackagesForPaths()
PhabricatorOwnersOwner::loadAllForPackages()
PhabricatorOwnersOwner::loadAffiliatedUserPHIDs()
PhabricatorOwnersOwner::loadAffiliatedPackages()
ConduitAPI_owners_query_Method::queryAll()
ConduitAPI_owners_query_Method::queryByOwner()
ConduitAPI_owners_query_Method::queryByAffiliatedUser()
ConduitAPI_owners_query_Method::queryByPath()
We should replace `PhabricatorOwnersOwner` with an Edge and move all of these calls to a Query class. I'm going to try to do as little of this work as I can for now since I'm much more interested in getting a functional policy implementation into other applications, but ProjectQuery needs to be policy-aware before I can do that and I need to dig some at least some of the callsites out enough that I can get a viewer in there without making the code worse than it is.
This adds a PhabricatorOwnersPackageQuery class and removes one callsite of one of those static methods.
I also intend to dissolve the two separate concepts of an "owner" (direct owner) and an "affiliated user" (indirect owner via project membership) since I think we're always fine with "affiliated users" owners.
Test Plan: Loaded home page / audit tool, which use the modified path. Ran queries manually via script. Made sure results included directly owned packages and packages owned through project membership.
Reviewers: vrana, btrahan, meitros
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D3193
Summary:
A few goals here:
- Slightly simplify the Query classtree -- it's now linear: `Query` -> `OffsetPagedQuery` (adds offset/limit) -> `PolicyQuery` (adds policy filtering) -> `CursorPagedPolicyQuery` (adds cursors).
- Allow us to move from non-policy queries to policy queries without any backward compatibility breaks, e.g. Conduit methods which accept 'offset'.
- Separate the client limit ("limit") from the datafetch hint limit ("rawresultlimit") so we can make the heurstic smarter in the future if we want. Some discussion inline.
Test Plan: Expanded unit tests to cover offset behaviors.
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D3192
Summary:
- Commit detail view
- List of projects
- "edit" action which takes the user to a simple form where they can only add / remove projects.
- Integrated the project relationship into the commit search indexer
- fixed a bug from D790; it seems you must select the column if you're going to join against it later. Without this change searching for author or projectfails 100% for me.
Test Plan: added and removed projects. verified appropriate projects showed up in detail and edit view. searched for commits by project and found the ones I was supposed to...!
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1614
Differential Revision: https://secure.phabricator.com/D3189
Summary:
When viewing Maniphest tasks grouped by project, there's this
weird algorithm that involves generating strings to use as sort keys.
It's pretty clearly wrong in several cases; this aims to fix it.
Test Plan:
Open Maniphest and try to sort by things. Unfortunately, I
don't have access to a decent Maniphest database, so I'm not certain it
works as it should.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin, mikaaay
Maniphest Tasks: T1595
Differential Revision: https://secure.phabricator.com/D3142
Summary:
In a revision with multiple diffs like
https://secure.phabricator.com/D3168?vs=6094&id=6095
clicking "Show Raw File (Left)" while comparing diffs 1 and 2 brings up
the version from base, instead of from diff 1. This is because the hunks
are stored as diffs between base and diff X, and the raw file is
generated from the hunks. This introduces a hack which is probably not
actually correct but seems to work for the 90% case.
(The "Show Raw File (Right)" button was and remains correct.)
Test Plan: Click raw file buttons while comparing different diffs.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3169
Summary:
Put flag note in a Javelin tooltip on the flag, and extra
reviewers in a Javelin tooltip on the (+N). This is a bit more expensive
because we have to fetch all of their usernames but I'm hoping that's
okay?
Test Plan:
Load a bunch of revision lists. Mouse on. Mouse off. Mouse
on. Mouse off.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3187
Summary:
- Store project members in edges.
- Migrate existing members to edge storage.
- Delete PhabricatorProjectAffiliation.
- I left the actual underlying data around just in case something goes wrong; we can delete it evenutally.
Test Plan:
- Ran migration.
- Created a new project.
- Joined and left a project.
- Added and removed project members.
- Manually called PhabricatorOwnersOwner::loadAffiliatedUserPHIDs() to verify its behavior.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D3186
Summary:
These are currently useless and confusing (they have no application impact), and should be migrated to edges if we want to restore them in some form.
I left the actual storage so this doesn't destroy any data, it just removes all traces of this feature from the UI.
Test Plan: Looked at and edited projects.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D3183
Summary:
I want to:
- move the membership storage to edges
- remove the concepts of "roles" (which are decorative text only) and "owners" (which will be replaced with policy-based controls)
This moves us a step closer to that by reducing the use of ProjectAffiliation outside of the class.
Test Plan: Loaded project profile. Called `project.query`. Joined and left a project.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D3182
Summary: This is clearer and more consistent with other Query classes.
Test Plan: Used home page, conduit api, project list, other interfaces.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D3179
Summary: I'm deprecating the concept of "owners" (which currently has no meaning in the actual application) in favor of policy-based controls. Remove the ability to query by it.
Test Plan: Grepped for setOwners(), no relevant hits. Browsed the project listing.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D3178
Summary:
I'm trying to make progress on the policy/visibility stuff since it's a blocker for Wikimedia.
First, I want to improve Projects so they can serve as policy groups (e.g., an object can have a visibility policy like "Visible to: members of project 'security'"). However, doing this without breaking anything or snowballing into a bigger change is a bit awkward because Projects are name-ordered and we have a Conduit API which does offset paging. Rather than breaking or rewriting this stuff, I want to just continue offset paging them for now.
So I'm going to make PhabricatorPolicyQuery extend PhabricatorOffsetPagedQuery, but can't currently since the `executeWithPager` methods would clash. These methods do different things anyway and are probably better with different names.
This also generally improves the names of these classes, since cursors are not necessarily IDs (in the feed case, they're "chronlogicalKeys", for example). I did leave some of the interals as "ID" since calling them "Cursor"s (e.g., `setAfterCursor()`) seemed a little wrong -- it should maybe be `setAfterCursorPosition()`. These APIs have very limited use and can easily be made more consistent later.
Test Plan: Browsed around various affected tools; any issues here should throw/fail in a loud/obvious way.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D3177
Summary:
Behave like Differential.
Also save one path ID query.
Test Plan: Displayed very large commit, clicked in ToC, clicked on Load.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3176
Summary:
- import_project_symbols supports an optional extra field, which is the
context of the symbol.
- Symbol query can take a symbol argument, either as a parameter or a
URL component (so you can now jump nav to `s Zerg/rush`, for
example).
- Conduit method not yet updated. Will do that later.
NOTE: Not providing a context is distinct from providing an empty
context, because an empty context stands for top-level context, i.e.
functions and classes for PHP. It will not find class methods, etc. It
is possible that we should use some weird token that could not normally
be a context name to stand in for empty context.
Test Plan: Do a bunch of symbol searches.
Reviewers: epriestley
Reviewed By: epriestley
CC: nh, aran, Korvin
Maniphest Tasks: T1602
Differential Revision: https://secure.phabricator.com/D3148
Summary:
In D3144, I made us look in application maps to find routing rules. However, we don't process //all// the maps when we 404 and try to do a "/" redirect. Process all of the maps.
Additionally, in D3146 I made the menu items application-driven. However, some pages (like 404) don't have a controller. Drop the requirement that the controller be nonnull.
Test Plan:
- Visited "/maniphest", got a redirect after this patch.
- Visited "/asldknfalksfn", got a 404 after this patch.
Reviewers: davidreuss, vrana, btrahan
Reviewed By: davidreuss
CC: aran
Maniphest Tasks: T1607
Differential Revision: https://secure.phabricator.com/D3158
Summary:
See T1602.
This is just the minimal functional patch; the scripts will continue
working because of the `DEFAULT ''`.
Test Plan:
Can't fully test this until I get more code working, but
nothing broke horribly yet.
Reviewers: epriestley
Reviewed By: epriestley
CC: nh, aran, Korvin
Maniphest Tasks: T1602
Differential Revision: https://secure.phabricator.com/D3147
Summary: This is a tax for internationalization.
Test Plan: Displayed a revision with added and moved files.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3166
Summary: Nobody knows that it's possible to highlight more lines because there's no interface for it.
Test Plan:
Highlighted:
- single line
- top to bottom
- bottom to top
- inside to outside
Reviewers: Korvin, epriestley
Reviewed By: epriestley
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D3150
Summary: Allow custom LDAP port to be defined in config file
Test Plan: Test login works by specifying a custom port
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3153
Summary:
This makes no changes, it just moves the menu icons to the applications instead of hard-coded on the page.
I'm going to try to address some of the angst in T1593 next...
Test Plan: Loaded logged-in / logged out pages. Clicked menu items. Looked at /applications/.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Maniphest Tasks: T1593, T1569
Differential Revision: https://secure.phabricator.com/D3146
Summary:
When we match an application route, select it as the current application and store it on the controller.
Move routes for the major applications into their PhabricatorApplication classes so this works properly.
Test Plan: Added a var_dump() and made sure we picked the right app for all these applications.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Maniphest Tasks: T1569
Differential Revision: https://secure.phabricator.com/D3144
Summary:
Show modified date on the right of the list view (which I guess
is also the created date, since pastes are immutable?)
Test Plan: Browse through the many volumes of untitled masterworks.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1600
Differential Revision: https://secure.phabricator.com/D3145
Summary:
- Put the code to generate informational dicts about flags into the
base class.
- Update flag.delete to accept an object PHID in order to delete the
flag on that object, since currently the model is that each object
may have at most one flag, and each flag has exactly one object,
although the former is not enforced.
- Add flag.edit, which creates or updates a flag, optionally with the
given color and note.
Test Plan:
Spend endless hours repeatedly running arc call-conduit and
arc flag.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3141
Summary: as title
Test Plan: tested without params. Tested with single known path
Reviewers: epriestley, vrana, nh
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3139
Summary:
Allow sorting tasks by title in addition to priority, updated,
created.
Test Plan:
Load Maniphest, click between order buttons, note that tasks
are being ordered correctly, as if by magic.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1592
Differential Revision: https://secure.phabricator.com/D3137
Summary:
- Adds a new "Applications" application.
- Builds an application list via application config instead of via hard-coding, so we can move toward better concepts of installing/uninstalling applications, etc.
- Applications indicate that they need attention with notice counts and brief status messages rathern than 50 giant tables of all sorts of app data.
I want to try replacing the home screen with this screen, pretty much. Not sure if this is totally crazy or not. What does everyone else think?
Test Plan: Will add screenshots.
Reviewers: btrahan, chad, vrana, alanh
Reviewed By: vrana
CC: aran, davidreuss, champo
Maniphest Tasks: T1569
Differential Revision: https://secure.phabricator.com/D3129
Summary:
Unlike (all? most?) other tables, the flag table has two wide
columns: the object name and the flag note. This fiddles with the
classes so neither gets squished too much by the other.
This is kind of a hack and I don't even know if it's cross-browser
compatible because I only have WebKit here. But maybe it's fine.
Test Plan:
View Differential home page while changing revision names and
flag notes to weird things.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1586
Differential Revision: https://secure.phabricator.com/D3128
Summary:
This lets you delete inlines from the preview at the bottom of
the page, instead of hunting for them through the diffs.
There is not yet a keyboard shortcut.
The mechanism for updating the inlines in the diffs is kind of a hack
and I'm sure I'm special-casing way too much, but at least it works.
Test Plan:
Load revision with many diffs. Create inlines all over the
place. Delete them all. Mwahaha.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1433, T1431
Differential Revision: https://secure.phabricator.com/D3131
Summary:
If the user has an editor configured, an Edit link appears next
to the History link.
Somewhat suboptimally, the column is still there if there are no edit
links, it's just empty. I don't know if it matters...
Test Plan: Load Diffusion pages while changing editor setting in preferences.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin, avivey
Maniphest Tasks: T1558
Differential Revision: https://secure.phabricator.com/D3124
Summary:
Firefox has a limit of ~500,000 elements which can be passed in literal array.
This amount of data is meaningless anyway because even Retina displays don't have such resolution.
Limit the amount of data to mitigate browser limitations and also reduce the page size.
Ensure that first and last element is passed.
I considered also reducing the granularity to days but I want new repositories to have nice precise graph.
Test Plan: Displayed the chart in Firefox.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3134
Summary: See D3125#3
Test Plan:
Well, apparently the FB test Phabricator has no other flags
in it, so I modified the database by hand... the changed revision was
not marked as flagged in Differential.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1557
Differential Revision: https://secure.phabricator.com/D3130
Summary:
To make it easier to monitor daemons, let's store their current state
(running, died, exited, or unknown) to the db. The purpose of this is to
provide more information on the daemon console about the status of daemons,
especially when they are running on multiple machines. This is mostly backend
work, with only a few frontend changes. (It is also dependent on a change
to libphutil.)
These changes will make dead or stuck daemons more obvious, and will allow
more work on the frontend to hide daemons (and logs) that have exited cleanly,
i.e. ones we don't care about any more.
Test Plan:
- run db migration, check in db that all daemons were marked as exited
- start up a daemon, check in db that it is marked as running
- open web interface, check that daemon is listed as running
- after daemon has been running for a little bit, check in db that dateModified
is being updated (indicating daemon is properly sending heartbeat)
- kill -9 daemon (but don't run bin/phd yet), and check that db still shows it
as running
- edit daemon db entry to show it as being on a different host, and backdate
dateModified field by 3 minutes, and check the web ui to show that the status
is unknown.
- change db entry to have proper host, check in web ui that daemon status is
displayed as dead. Check db to see that the status was saved.
- run bin/phd stop, and see that the formerly dead daemon is now exited.
Reviewers: epriestley, vrana
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3126
Summary:
The tables are currently kind of wide, and the emails for
non-recognized users seem like the least useful parts, so I put them in
tooltips so they're only visible if you want them. On the other hand, it
means you can only view one at a time, and if you're on mobile you can't
see them at all. Overall, not sure whether this is a good idea.
Test Plan:
Load Diffusion pages with some recognized and some
unrecognized users. Hover over the latter and see that emails appear.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3123
Summary:
Currently, on secure.phabricator.com, if you type "e" we generate about 600 users and ship them over the wire. This takes ~300ms.
Instead, limit the results to a superset of what the client will actually show.
Test Plan: Ran user typeahead queries, tweaked limit to 1.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3121
Summary:
Put a flag icon to the left of each flagged revision in the
Differential summary tables. Flag is colored correctly and when hovered
reveals the note in a tooltip.
As epriestley specifically notes that the Flagged Revisions table should
only be shown when a user is looking at their own revisions, maybe this
ought to be limited by what controller is using this view, or something.
Test Plan:
View Differential main page. Check that flags appear
correctly if some revisions are flagged.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin, avivey
Maniphest Tasks: T1557
Differential Revision: https://secure.phabricator.com/D3125
Summary:
- Include symbols in main typeahead results.
- Simplify the symbol query a bit and extend PhabricatorOffsetPagedQuery. There was some stuff around language ranking that I got rid of, I think the theory there was that mapping file extensions to languages might not work in general but I think it works fine in practice, and we have more config stuff now around guessing languages and getting the mappings right.
- Make it easier to debug the typeahead by showing the results in page format for non-ajax requests.
- When we have too many results, show only the top few of each type.
Depends on D3116, D3117
Test Plan: Used typeahead, got symbols in results. Hit endpoint with non-ajax, got useful debug view.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1569
Differential Revision: https://secure.phabricator.com/D3118
Summary: If a change copies some file `A` to `B` and also edits `A`, we currently record this as an indirect change and don't show the edits to `A` in the diff. Instead, record these as direct changes.
Test Plan: Created two commits, one which copied `A` to `B` without modifying `A` and one which copied `A` to `B` and modified A. Viewed both commits in Diffusion. The unmodified commit did not show `A`, and the modified commit did (with the correct changes).
Reviewers: btrahan, vrana
Reviewed By: vrana
CC: champo, aran
Differential Revision: https://secure.phabricator.com/D3120
Summary:
Added the boxes.
NOTE: I am not sure how to deal with the user choosing a minimum higher than the maximum; it causes an empty result set, but if we can avoid allowing it, that'd be better, I think.
Test Plan: See the boxes there, not filtering. Change them, see them filtering.
Reviewers: epriestley
CC: aran, Korvin
Maniphest Tasks: T1565
Differential Revision: https://secure.phabricator.com/D3109
Summary: See discussion in D3103. We don't need this for now; if we do in the future we should probably use an alternate implementation.
Test Plan: Grepped for 'placeholder', viewed UI examples.
Reviewers: vrana
Reviewed By: vrana
CC: aran
Maniphest Tasks: T1569
Differential Revision: https://secure.phabricator.com/D3115
Summary:
This needs a bunch of refinement but pretty much works. Currently shows only users and applications. Plans:
- Show actual search results too.
- Clean up the datasource endpoint so it's less of a mess.
- Make other typeaheads look more like this one.
- Improve sorting.
- Make object names hit the named objects as the first match.
Test Plan: Will attach screenshots.
Reviewers: btrahan, vrana, chad
Reviewed By: vrana
CC: aran
Maniphest Tasks: T1569
Differential Revision: https://secure.phabricator.com/D3110
Summary:
Each query takes over 2 seconds in FBCODE.
I didn't find a way how to speed them up.
There's also no easy way how to parallelize them at least.
So AJAX is the last instance.
Test Plan: Loaded commit with one branch and no tag.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3112
Summary:
We have some false positives on commit changes checker.
I'm not sure if the reason is a difference between `git diff` and `svn diff` or something else but making this more robust doesn't harm anything.
We couldn't make the files from the whole changeset because I want to ignore context bigger than `$num_lines` to reduce rebase noise.
Test Plan:
Ran the method on diff which had false positive previously.
Ran the method on a diff with real change.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3107
Summary:
- Looks better (can probably still use some tweaks), especially search.
- Moves logout from weird footer location to main menu.
- Reactive: on tablets and phones, the menu adjusts to remain useful.
- Fixed position on desktops for future side nav changes.
- Adds an icon header thing that's currently hard-coded but will be application-driven soon.
Test Plan: Used menu on desktop, tablet, phone, logged in / logged out, toggled darkconsole. Will add some screenshots.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1569
Differential Revision: https://secure.phabricator.com/D3105
Summary: The new menu stuff needs this but it was easy to pull out on its own.
Test Plan: Cliked UI example buttons.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1569
Differential Revision: https://secure.phabricator.com/D3104
Summary:
Support placeholder text for inputs. We currently don't use this because it requires JS and doesn't degrade (no JS means you have zero idea what the input is for if it isn't separately labeled) but there are some cases where intent is obvious from context (for example, the search input in the menu bar, which is fairly obvious on its own and will soon have a magnifying glass icon) and in such cases it's much prettier and saves a bunch of space over an explicit label. Add a behavior so we can add placeholders where they make sense.
This implementation is somewhat sanity-checked agianst the two jQuery placeholder implementations I was able to google:
https://github.com/danielstocks/jQuery-Placeholder/https://github.com/mathiasbynens/jquery-placeholder
Since we don't currently have any uses cases, I haven't included support for making JS access to the `value` work, for password inputs, or for dynamically altering the placeholder.
Test Plan: Played around with the placeholder in the UI example in various browsers and couldn't break it.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1569
Differential Revision: https://secure.phabricator.com/D3103
Summary: For any count fact, allow a chart to be drawn. INCREDIBLY POWERFUL DATA ANALYSIS PLATFORM.
Test Plan: Drew a chart of object counts. Drew the Maniphest burn chart.
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1562
Differential Revision: https://secure.phabricator.com/D3099
Summary:
- Add PhabricatorApplication. This is a general class that I have grand designs for, but used here to allow applications to provide objects for analysis by the facts appliction.
- Add FactCursors, to keep track of where iterators are.
- Make the daemon do something sort of useful.
- Add `bin/fact cursors` for showing and managing objects and cursors.
- Add some options to `bin/fact analyze`.
Test Plan:
- `bin/fact cursors`, `bin/fact cursors --reset DifferentialRevision`, `bin/fact cursors --reset X`
- `bin/fact analyze`, `bin/fact analyze --all`, `bin/fact analyze --iterator DifferentialRevision --skip-aggregates`
- `bin/phd debug fact`
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1562
Differential Revision: https://secure.phabricator.com/D3098
Summary: helping noobs help themselves
Test Plan: set $rows = array() and verified the txt. also threw a false && for my isAdmin conditional to check the other txt
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1086, T1360
Differential Revision: https://secure.phabricator.com/D3100
After this commit: d9296638cd
I started getting this error:
Unhandled Exception ("Exception")
Bad getter call: getURIObject
It turns out that getURIObject just needed to be getRemoteURIObject and then the problem goes away.
Summary: Not totally sure about this but I think it's okay?
Test Plan: Loaded /fact/, got a more readable page.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Maniphest Tasks: T1562
Differential Revision: https://secure.phabricator.com/D3090
Summary:
In D3063, we stopped converting "user@domain:path" git-style URIs, but this broke the SSH-detection code and I missed that in my test plan because my test case uses natural SSH keys so the omission of SSH flags didn't cause failures.
This code is a bit of a mess anyway. Consolidate and refactor it to be a bit simpler, and add test coverage.
Test Plan: Ran unit tests. Ran "test_connection.php" in SSH and non-SSH modes, verified SSH modes generated appropriate ssh-agent commands around the git remote commands.
Reviewers: vrana, btrahan, tberman
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1529
Differential Revision: https://secure.phabricator.com/D3093
Summary: Currently, if you have a task with project "X" and you apply a batch edit to it to remove "X", the action has no effect because we incorrectly skip the edit as a no-op. Instead, don't perform this check for edge edits.
Test Plan: Batch removed a project from several tasks with only one project.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Maniphest Tasks: T1566
Differential Revision: https://secure.phabricator.com/D3092
Summary:
Some facts are aggregations of other facts. For example, we may compute how many times each macro is used in each object as a "raw fact":
Dnnn uses macro "psyduck" 6 times.
But we want to present this data in aggregate form, e.g. "order macros by popularity". We can do this at runtime and it probably won't be too awful a query, but we can also aggregate it cheaply:
Macro "psyduck" is used 3920 times across all objects.
...and then do a query like "select macros ordered by usage".
"Aggregate" facts support facts like this. The aggregate facts I've implemented are:
- Count of all objects.
- Count of objects of type X.
- Last time facts were updated.
These clearly fit the "aggregate" facts template well. I'm not 100% sure macros do. We can use this table to answer a question like "What are the most popular macros, ordered by use?" We can also use it to answer a question like "What are the most popular macros in the last 6 months?", if we build a specific fact for that. But we can't use it to answer a question like "What are the most popular macros between times X and Y?". Maybe that's important; maybe not.
This seems like a good fit for at least some types of facts.
I'll de-magic the keys a bit in the next diff.
Test Plan: Ran the engines and got some aggregated facts about other facts.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Maniphest Tasks: T1562
Differential Revision: https://secure.phabricator.com/D3089
Test Plan: Jumped on correct line in SVN, Git and HG repos.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3084
Summary:
Basic "Fact" application with some storage, part of a daemon, and a control binary.
= Goals =
The general idea is that we have various statistics we'd like to compute, like the frequency of image macros, reviewer responsiveness, task close rates, etc. Computing these on page load is expensive and messy. By building an ETL pipeline and running it in a daemon, we can precompute statistics and just pull them out of "stats" tables.
One way to do this is just to completely hard-code everything, e.g. have a daemon that runs every hour which issues a big-ass query and dumps results into a table per-fact or per fact-group. But this has a bunch of drawbacks: adding new stuff to the pipeline is a pain, various fact aggregators can't share much code, updates are slow and expensive, we can never build generic graphs on top of it, etc.
I'm hoping to build an ETL pipeline which is generic enough that we can use it for most things we're interested in without needing schema changes, and so that installs can use it also without needing schema changes, while still being specific enough that it's fast and we can build useful stuff on top of it. I'm not sure if this will actually work, but it would be cool if it does so I'm starting pretty generally and we'll see how far I get. I haven't built this exact sort of thing before so I might be way off.
I'm basing the whole thing on analyzing entire objects, not analyzing changes to objects. So each part of the pipeline is handed an object and told "analyze this", not handed a change. It pretty much deletes all the old data about that thing and then writes new data. I think this is simpler to implement and understand, and it protects us from all sorts of weird issues where we end up with some kind of garbage in the DB and have to wipe the whole thing.
= Facts =
The general idea is that we extract "facts" out of objects, and then the various view interfaces just report those facts. This change has on type of fact, a "raw fact", which is directly derived from an object. These facts are concerete and relate specifically to the object they are derived from. Some examples of such facts might be:
D123 has 9 comments.
D123 uses macro "psyduck" 15 times.
D123 adds 35 lines.
D123 has 5 files.
D123 has 1 object.
D123 has 1 object of type "DREV".
D123 was created at epoch timestamp 89812351235.
D123 was accepted by @alincoln at epoch timestamp 8397981839.
The fact storage looks like this:
<factType, objectPHID, objectA, valueX, valueY, epoch>
Currently, we supprot one optional secondary key (like a user PHID or macro PHID), two optional integer values, and an optional timestamp. We might add more later. Each fact type can use these fields if it wants. Some facts use them, others don't. For instance, this diff adds a "N:*" fact, which is just the count of total objects in the system. These facts just look like:
<"N:*", "PHID-xxxx-yyyy", ...>
...where all other fields are ignored. But some of the more complex facts might look like:
<"DREV:accept", "PHID-DREV-xxxx", "PHID-USER-yyyy", ..., ..., nnnn> # User 'yyyy' accepted at epoch 'nnnn'.
<"FILE:macro", "PHID-DREV-xxxx", "PHID-MACR-yyyy", 17, ..., ...> # Object 'xxxx' uses macro 'yyyy' 17 times.
Facts have no uniqueness constraints. For @vrana's reviewer responsiveness stuff, we can insert multiple rows for each reviewer, e.g.
<"DREV:reviewed", "PHID-DREV-xxxx", "PHID-USER-yyyy", nnnn, ..., mmmm> # User 'yyyy' reviewed revision 'xxxx' after 'nnnn' seconds at 'mmmm'.
The second value (valueY) is mostly because we need it if we sample anything (valueX = observed value, valueY = sample rate) but there might be other uses. We might need to add "objectB" at some point too -- currently we can't represent a fact like "User X used macro Y on revision Z", so it would be impossible to compute macro use rates //for a specific user// based on this schema. I think we can start here though and see how far we get.
= Aggregated Facts =
These aren't implemented yet, but the idea is that we can then take the "raw facts" and compute derived/aggregated/rollup facts based on the raw fact table. For example, the "count" fact can be aggregated to arrive at a count of all objects in the system. This stuff will live in a separate table which does have uniqueness constraints, and come in the next diff.
We might need some kind of time series facts too, not sure about that. I think most of our use cases today are covered by raw facts + aggregated facts.
Test Plan: Ran `bin/fact` commands and verified they seemed to do reasonable things.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran, majak
Maniphest Tasks: T1562
Differential Revision: https://secure.phabricator.com/D3078
Summary: Some people don't like these, so they should be able to turn them off.
Test Plan:
Toggled the setting on and off; loaded a page in diffusion and differential
that should have symbol cross-references, and saw that they weren't linked
when I had the setting disabled. I also checked that the symbols are still
linked when the setting hasn't been touched.
Reviewers: epriestley, vrana
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3069
Summary: I will need this for tracking line number in Blame previous revision.
Test Plan:
$ hg diff --rev 0:1
$ svn diff -r 64382:64383 README
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3083
Summary:
See title - This simply adds a checkbox to the "Edit User" page in the
admin view, to allow an administrator to re-send the "Welcome to Phabricator"
email.
Test Plan:
Sent myself another welcome email using the checkbox.
Created a new user using the admin panel, to make sure emails still get
sent for new users.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1524
Differential Revision: https://secure.phabricator.com/D3081
Summary:
We need `$this->old` and `$this->new` in `renderShield()`.
Broken since D2358.
Test Plan: Loaded contents of file with lots of changes.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3080
Summary: This iterator processes objects that have been updated.
Test Plan:
Ran this test script:
$cursor = null;
$table = new DifferentialRevision();
while (true) {
$iterator = new PhabricatorFactsUpdateIterator($table, $cursor);
foreach ($iterator as $new_cursor => $update) {
echo "{$new_cursor} => D".$update->getID()."\n";
$cursor = $new_cursor;
}
echo "Zzz...\n";
sleep(5);
}
Verified it iterated over every object and then stopped. Made a comment on a differenial revision, verified it iterated over the object after 15 seconds.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Maniphest Tasks: T1562
Differential Revision: https://secure.phabricator.com/D3077
Summary:
- the current LDAP auth flow expects a DN to look like
cn=ossareh,ou=Users,dc=example,dc=com
- however many LDAP setups have their dn look something like
cn=Mike Ossareh,ou=Users,dc=example,dc=com
Test Plan:
Test if logins work with a LDAP setup which has cn=Full Name
instead of cn=username.
To test you should ensure you set the properties needed to
trigger the search before login as detailed in conf/default.conf.php
Reviewers: epriestley
CC: mbeck, aran, Korvin
Differential Revision: https://secure.phabricator.com/D3072
Summary: Currently, the logout link is this awkward form in the footer since we have to CSRF it. Enable a GET + dialog + confirm workflow instead so the logout link can just be a link instead of this weird mess.
Test Plan: Went to /logout/, logged out.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D3066
Summary:
This allows getting stats for any arbitrary period, e.g.
- everything
- last week
- week before last week
Test Plan: Ran the script for last week.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3064
