Summary:
Ref T4122. Implements a credential management application for the uses described in T4122.
@chad, this needs an icon, HA HA HAHA HA BWW HA HA HA
bwahaha
Test Plan: See screenshots.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: chad, aran
Maniphest Tasks: T4122
Differential Revision: https://secure.phabricator.com/D7608
Summary:
We've been having trouble with viewing diffs timing out when there's a lot of unit test failures. It was caused by formatting userdata for every single failure. The expensive part of this was actually creating the engine for every result, so moved the construction outside of the loop.
Diffs that timed out (2 min) loading before load in around 6 seconds now.
Test Plan: Loaded diffs that used to time out. Verified that details still looked right when Show Full Unit Test Results Is Clicked.
Reviewers: epriestley, keegancsmith, lifeihuang, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran, andrewjcg
Differential Revision: https://secure.phabricator.com/D7581
Summary:
Ref T4110. This denormalized field used to power "Group By: Assigned" got dropped in the T2217 migration at some point.
Restore its population, and fix all the data in the database.
Test Plan: Ran migration, verified database came out reasonable-looking. Reassigned a task, verified database. Ran a "Group By: assigned" query.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4110
Differential Revision: https://secure.phabricator.com/D7602
Summary:
Ref T2230. When fully set up, we have up to three users who all need to write into the repositories:
- The webserver needs to write for HTTP receives.
- The SSH user needs to write for SSH receives.
- The daemons need to write for "git fetch", "git clone", etc.
These three users don't need to be different, but in practice they are often not likely to all be the same user. If for no other reason, making them all the same user requires you to "git clone httpd@host.com", and installs are likely to prefer "git clone git@host.com".
Using three different users also allows better privilege separation. Particularly, the daemon user can be the //only// user with write access to the repositories. The webserver and SSH user can accomplish their writes through `sudo`, with a whitelisted set of commands. This means that even if you compromise the `ssh` user, you need to find a way to escallate from there to the daemon user in order to, e.g., write arbitrary stuff into the repository or bypass commit hooks.
This lays some of the groundwork for a highly-separated configuration where the SSH and HTTP users have the fewest privileges possible and use `sudo` to interact with repositories. Some future work which might make sense:
- Make `bin/phd` respect this (require start as the right user, or as root and drop privileges, if this configuration is set).
- Execute all `git/hg/svn` commands via sudo?
Users aren't expected to configure this yet so I haven't written any documentation.
Test Plan:
Added an SSH user ("dweller") and gave it sudo by adding this to `/etc/sudoers`:
dweller ALL=(epriestley) SETENV: NOPASSWD: /usr/bin/git-upload-pack, /usr/bin/git-receive-pack
Then I ran git pushes and pulls over SSH via "dweller@localhost". They successfully interacted with the repository on disk as the "epriestley" user.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7589
Summary:
- Add an option for the queue.
- By default, enable it.
- Dump new users into the queue.
- Send admins an email to approve them.
Test Plan:
- Registered new accounts with queue on and off.
- As an admin, approved accounts and disabled the queue from email.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7576
Summary:
- If you're an administrator and there are users waiting for approval, show a count on the home page.
- Sort out the `isUserActivated()` access check.
- Hide all the menu widgets except "Logout" for disabled and unapproved users.
- Add a "Log In" item.
- Add a bunch of unit tests.
Test Plan: Ran unit tests, clicked around as unapproved/approved/logged-in/logged-out users.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, chad
Differential Revision: https://secure.phabricator.com/D7574
Summary:
Small step forward which improves existing stuff or lays groudwork for future stuff:
- Currently, to check for email verification, we have to single-query the email address on every page. Instead, denoramlize it into the user object.
- Migrate all the existing users.
- When the user verifies an email, mark them as `isEmailVerified` if the email is their primary email.
- Just make the checks look at the `isEmailVerified` field.
- Add a new check, `isUserActivated()`, to cover email-verified plus disabled. Currently, a non-verified-but-not-disabled user could theoretically use Conduit over SSH, if anyone deployed it. Tighten that up.
- Add an `isApproved` flag, which is always true for now. In a future diff, I want to add a default-on admin approval queue for new accounts, to prevent configuration mistakes. The way it will work is:
- When the queue is enabled, registering users are created with `isApproved = false`.
- Admins are sent an email, "[Phabricator] New User Approval (alincoln)", telling them that a new user is waiting for approval.
- They go to the web UI and approve the user.
- Manually-created accounts are auto-approved.
- The email will have instructions for disabling the queue.
I think this queue will be helpful for new installs and give them peace of mind, and when you go to disable it we have a better opportunity to warn you about exactly what that means.
Generally, I want to improve the default safety of registration, since if you just blindly coast through the path of least resistance right now your install ends up pretty open, and realistically few installs are on VPNs.
Test Plan:
- Ran migration, verified `isEmailVerified` populated correctly.
- Created a new user, checked DB for verified (not verified).
- Verified, checked DB (now verified).
- Used Conduit, People, Diffusion.
Reviewers: btrahan
Reviewed By: btrahan
CC: chad, aran
Differential Revision: https://secure.phabricator.com/D7572
Summary:
Ref T2230. The SVN protocol has a sensible protocol format with a good spec here:
http://svn.apache.org/repos/asf/subversion/trunk/subversion/libsvn_ra_svn/protocol
Particularly, compare this statement to the clown show that is the Mercurial wire protocol:
> It is possible to parse an item without knowing its type in advance.
WHAT A REASONABLE STATEMENT TO BE ABLE TO MAKE ABOUT A WIRE PROTOCOL
Although it makes substantially more sense than Mercurial, it's much heavier-weight than the Git or Mercurial protocols, since it isn't distributed.
It's also not possible to figure out if a request is a write request (or even which repository it is against) without proxying some of the protocol frames. Finally, several protocol commands embed repository URLs, and we need to reach into the protocol and translate them.
Test Plan: Ran various SVN commands over SSH (`svn log`, `svn up`, `svn commit`, etc).
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7556
Summary:
Ref T2230. This is substantially more complicated than Git, but mostly because Mercurial's protocol is a like 50 ad-hoc extensions cobbled together. Because we must decode protocol frames in order to determine if a request is read or write, 90% of this is implementing a stream parser for the protocol.
Mercurial's own parser is simpler, but relies on blocking reads. Since we don't even have methods for blocking reads right now and keeping the whole thing non-blocking is conceptually better, I made the parser nonblocking. It ends up being a lot of stuff. I made an effort to cover it reasonably well with unit tests, and to make sure we fail closed (i.e., reject requests) if there are any parts of the protocol I got wrong.
A lot of the complexity is sharable with the HTTP stuff, so it ends up being not-so-bad, just very hard to verify by inspection as clearly correct.
Test Plan:
- Ran `hg clone` over SSH.
- Ran `hg fetch` over SSH.
- Ran `hg push` over SSH, to a read-only repo (error) and a read-write repo (success).
Reviewers: btrahan, asherkin
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7553
Summary:
Ref T2230. In Git, we can determine if a command is read-only or read/write from the command itself, but this isn't the case in Mercurial or SVN.
For Mercurial and SVN, we need to proxy the protocol that's coming over the wire, look at each request from the client, and then check if it's a read or a write. To support this, provide a more flexible version of `passthruIO`.
The way this will work is:
- The SSH IO channel is wrapped in a `ProtocolChannel` which can parse the the incoming stream into message objects.
- The `willWriteCallback` will look at those messages and determine if they're reads or writes.
- If they're writes, it will check for write permission.
- If we're good to go, the message object is converted back into a byte stream and handed to the underlying command.
Test Plan: Executed `git clone`, `git clone --depth 3`, `git push` (against no-write repo, got error), `git push` (against valid repo).
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, asherkin, aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7551
Test Plan: This is one of the rare moments where unit tests for views would be useful.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7547
Summary:
Depends on D7519.
This implements support for build logs in Harbormaster. This includes support for appending to a log from the "Run Remote Command" build step.
It also adds the ability to cancel builds.
Currently the build view page doesn't update the logs live; I'm sure this can be achieved with Javelin, but I don't have enough experience with Javelin to actually make it poll from updates to content in the background.
{F79151}
{F79153}
{F79150}
{F79152}
Test Plan:
Tested this by setting up SSH on a Windows machine and using a Remote Command configured with:
```
C:\Windows\system32\cmd.exe /C cd C:\Build && mkdir Build_${timestamp} && cd Build_${timestamp} && git clone --recursive https://github.com/hach-que/Tychaia.git && cd Tychaia && Protobuild.exe && C:\Windows\Microsoft.NET\Framework\v4.0.30319\MSBuild.exe Tychaia.Windows.sln
```
and observed the output of the build stream from the Windows machine into Phabricator.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7521
Summary:
I updated the wiki too - https://secure.phabricator.com/w/projects/pebkac/ - with what I am thinking right now. Rough plan here is
- next diff:
- implement editors and transactions
- implement "web type" for contact source
- /pebkac/item/new/ will be the entry point for this
- implement "actions" on a contact
- probably some "polish" on the scaffolding laid out here; like "create" permissions maybs
- diffs after that:
- implement "twitter" type for source
- implement email reply handler stuff for item and source
Probs a great time to blast huge holes in all this stuff. :D
Test Plan: these pages load and arc lint doesn't complain
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran, chad
Differential Revision: https://secure.phabricator.com/D7465
Summary:
Ref T1049. Ref T2222. `DifferentialDiff` does not currently have a PHID, but we need it for Harbormaster and ApplicationTransactions. See some discussion in D7501.
(I split the SQL into two sections so we can't fail in the middle. At some point, I'd like to do a pass on the migration stuff and get this happening automatically, and also simplify the PatchList.)
Test Plan:
- Ran `bin/storage upgrade`.
- Checked for valid PHIDs in the database.
- Used `phid.query` to look up a diff by PHID.
- Created a new diff and verified it got a PHID.
Reviewers: btrahan, hach-que
Reviewed By: btrahan
CC: aran, vrana
Maniphest Tasks: T2222, T1049
Differential Revision: https://secure.phabricator.com/D7513
Summary:
Depends on D7498.
This implements support for a "build step implementation". Build steps have an associated class name (which makes the class in PHP) and a details field, which is serialized JSON (same as PhabricatorRepository).
This also implements a SleepBuildStepImplementation which just pauses the build for a specified period of seconds.
Test Plan:
Inserted a build step with `insert into harbormaster_buildstep (phid, buildPlanPHID, className, details, dateCreated, dateModified) values ('', 'PHID-HMCP-zkh5w6czfbfpk2gxwdeo', 'SleepBuildStepImplementation', '{"seconds":5}', NOW(), NOW());` (adjusting the build plan PHID as appropriate).
Started the daemon and applied the build plan to a buildable, and saw the daemon take a 5 second delay after creating `SleepBuildStepImplementation`.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran, chad
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7499
Summary: The idea is to have all `phtize` definitions in applications to allow their separation.
Test Plan: Clicked View Options after mangling the translation.
Reviewers: epriestley
Reviewed By: epriestley
CC: btrahan, Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7345
Summary: This allows users to set their HTTP access passwords via Diffusion interface.
Test Plan: Clicked the "Set HTTP Access Password" link, set a password and saw it appear in the DB.
Reviewers: #blessed_reviewers, hach-que, btrahan
Reviewed By: hach-que
CC: Korvin, epriestley, aran, jamesr
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7462
Summary:
`RepositoryStatusMessage` is basically a key/value table associated with a repository that I'm using to let the daemons store the most recent event of a given type, so we can easily show it on the status dashboard. I think this will be a lot easier for users to figure out than digging through logfiles.
I'm also going to write the "this needs a pull" status here eventually, for reducing the time lapse between pushes and discovery.
- Add storage for these messages.
- Have the pull engine populate the INIT phase. I'll do the FETCH phase next.
- Update the status readout to show all the various states.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7461
Summary:
Fixes T3416. Fixes T1733.
- Adds a flag to the commit table showing whether or not we have parsed it.
- The flag is set to `0` initially when the commit is discovered.
- The flag is set to `1` when the changes are parsed.
- The UI can now use the flag to distinguish between "empty commit" and "commit which we haven't imported changes for yet".
- Simplify rendering code a little bit.
- Fix an issue with the Message parser for empty commits.
- There's a key on the flag so we can do `SELECT * FROM repository_commit WHERE repositoryID = %d AND importStatus = 0 LIMIT 1` soon, to determine if a repository is fully imported or not. This will let us improve the UI (Ref T776, Ref T3217).
Test Plan:
- Ran `bin/storage upgrade -f`.
- Created an empty commit.
- Without the daemons running, ran `bin/repository pull GTEST` and `bin/repository discover GTEST`.
- Viewed web UI to get the first screenshot ("Still Importing...").
- Ran the message and change steps with `scripts/repository/reparse.php`.
- Viewed web UI to get the second screenshot ("Empty Commit").
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T776, T1733, T3416, T3217
Differential Revision: https://secure.phabricator.com/D7428
Summary: Like D7423, but for SSH.
Test Plan: Ran `git clone ssh://...`, got a clone.
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7424
Summary:
- Add web UI for configuring SSH hosting.
- Route git reads (`git-upload-pack` over SSH).
Test Plan:
>>> orbital ~ $ git clone ssh://127.0.0.1/
Cloning into '127.0.0.1'...
Exception: Unrecognized repository path "/". Expected a path like "/diffusion/X/".
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
>>> orbital ~ $ git clone ssh://127.0.0.1/diffusion/X/
Cloning into 'X'...
Exception: No repository "X" exists!
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
>>> orbital ~ $ git clone ssh://127.0.0.1/diffusion/MT/
Cloning into 'MT'...
Exception: This repository is not available over SSH.
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
>>> orbital ~ $ git clone ssh://127.0.0.1/diffusion/P/
Cloning into 'P'...
Exception: TODO: Implement serve over SSH.
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7421
Summary: No editing or view yet, just adds the schema and a policy default. Part of D7391.
Test Plan: `bin/storage upgrade`
Reviewers: hach-que, btrahan
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7415
Summary:
Gets rid of some old Differential-specific nonsense and replaces it with general runtime-pluggable Remarkup rules.
Facebook: This removes two options which may be in use. Have any classes being added via config here just subclass the new abstract bases instead. This should take 5 seconds to fix. You can adjust order by overriding `getPriority()` on the rules, if necessary.
Test Plan: See comments.
Reviewers: btrahan
Reviewed By: btrahan
CC: FacebookPOC, andrewjcg, aran
Differential Revision: https://secure.phabricator.com/D7393
Summary: Makes a white hover icon show on the policy dropdown. Also fixed some spacing. Fixes T4017
Test Plan: hover over the policy dropdown
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4017
Differential Revision: https://secure.phabricator.com/D7388
Summary:
Ref T1049. I don't really want to sink too much time into this right now, but a seemingly reasonable architecture came to me in a dream. Here's a high-level overview of how things fit together:
- **"Build"**: In Harbormaster, "build" means any process we want to run against a working copy. It might actually be building an executable, but it might also be running lint, running unit tests, generating documentation, generating symbols, running a deploy, setting up a sandcastle, etc.
- `HarbormasterBuildable`: A "buildable" is some piece of code which build operations can run on. Generally, this is either a Differential diff or a Diffusion commit. The Buildable class just wraps those objects and provides a layer of abstraction. Currently, you can manually create a buildable from a commit. In the future, this will be done automatically.
- `HarbormasterBuildStep`: A "build step" is an individual build operation, like "run lint", "run unit", "build docs", etc. The step defines how to perform the operation (for example, "run unit tests by executing 'arc unit'"). In this diff, this barely exists.
- `HarbormasterBuildPlan`: This glues together build steps into groups or sequences. For example, you might want to "run unit", and then "deploy" if the tests pass. You can create a build plan which says "run step "unit tests", then run step "deploy" on success" or whatever. In the future, these will also contain triggers/conditions ("Automatically run this build plan against every commit") and probably be able to define failure actions ("If this plan fails, send someone an email"). Because build plans will run commands, only administrators can manage them.
- `HarbormasterBuild`: This is the concrete result of running a `BuildPlan` against a `Buildable`. It tracks the build status and collects results, so you can see if the build is running/successful/failed. A `Buildable` may have several `Build`s, because you can execute more than one `BuildPlan` against it. For example, you might have a "documentation" build plan which you run continuously against HEAD, but a "unit" build plan which you want to run against every commit.
- `HarbormasterBuildTarget`: This is the concrete result of running a `BuildStep` against a `Buildable`. These are children of `Build`. A step might be able to produce multiple targets, but generally this is something like "Unit Tests" or "Lint" and has an overall status, so you can see at a glance that unit tests were fine but lint had some issues.
- `HarbormasterBuildItem`: An optional subitem for a target. For lint, this might be an individual file. For unit tests, an individual test. For normal builds, an executable. For deploys, a server. For documentation generation, there might just not be subitems.
- `HarbormasterBuildLog`: Provides extra information, like command/execution transcripts. This is where stdout/stderr will get dumped, and general details and other messages.
- `HarbormasterBuildArtifact`: Stores side effects or results from build steps. For example, something which builds a binary might put the binary in "Files" and then put its PHID here. Unit tests might put coverage information here. Generally, any build step which produces some high-level output object can use this table to record its existence.
This diff implements almost nothing and does nothing useful, but puts most of these object relationships in place. The two major things you can't easily do with these objects are:
1) Run arbitrary cron jobs. Jenkins does this, but it feels tacked on and I don't know of anyone using it for that. We could create fake Buildables to get a similar effect, but if we need to do this I'd rather do it elsewhere in general. Build and cron/service/monitoring feel like pretty different problems to me.
2) Run parameterized/matrix steps (maybe?). Bamboo has this plan/stage/task/job breakdown where a build step can generate a zillion actual jobs, like "build client on x86", "build server on x86", "build client on ARM", "build server on ARM", etc. We can sort of do this by having a Step map to multiple Targets, but I haven't really thought about it too much and it may end up being not-great. I'd guess we have like an 80% chance of getting a clean implementation if/when we get there. I suspect no one actually needs this, or when they do they'll just implement a custom Step and it can be parameterized at that level. I'm not too worried about this overall.
The major difference between this and Jenkins/Bamboo/TravisCI is that all three of those are **plan-centric**: the primary object in the system is a build plan, and the dashboard shows you all your build plans and the current status. I don't think this is the right model. One disadvantage is that you basically end up with top-level messaging that says "Trunk is broken", not "Trunk was broken by commit af32f392f". Harbormaster is **buildable-centric**: the primary object in the system is stuff you can run build operations against (commits/branches/revisions), and actual build plans are secondary. The main view will be "recent commits on this branch, and whether they're good or not" -- which I think is what's most important in a larger/more complex product -- not the pass/fail status of all jobs. This also makes it easier and more natural to integrate with Differential and Diffusion, which both care about the overall status of the commit/revision, not the current status of jobs.
Test Plan: Poked around, but this doesn't really do anything yet.
Reviewers: btrahan
Reviewed By: btrahan
CC: zeeg, chad, aran, seporaitis
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7368
Summary: Ref T4010. Adds a history page and restores the transaction title strings, which previously sort-of existed in the defunct feed story class.
Test Plan: See screenshots.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T4010
Differential Revision: https://secure.phabricator.com/D7371
Summary:
Ref T4010. Projects have a weird proto-version of ApplicationTransactions which is very similar but not quite the same.
Move the storage to a modern format, but keep all the other code for now.
Test Plan: Migrated project transactions; edited projects.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4010
Differential Revision: https://secure.phabricator.com/D7370
Summary:
Ref T1344. This is //very// rough. Some UI issues:
- Empty states for the board and columns are junky.
- Column widths are crazy. I think we need to set them to fixed-width, since we may have an arbitrarily large number of columns?
- I don't think we have the header UI elements in M10 yet and that mock is pretty old, so I sort of very roughly approximated it.
- What should we do when you click a task title? Popping the whole task in a dialog is possible but needs a bunch of work to actually work. Might need to build "sheets" or something.
- Icons are slightly clipped for some reason.
- All the backend stuff is totally faked.
Generally, my plan is just to use these to implement all of T390. Specifically:
- "Kanban" projects will have "Backlog" on the left. You'll drag them toward the right as you make progress.
- "Milestone" projects will have "No Milestone" on the left, then "Milestone 9", "Milestone 8", etc.
- "Sprint" projects will have "Backlog" on the left, then "Sprint 31", "Sprint 30", etc.
So all of these things end up being pretty much exactly the same, with some minor text changes and new columns showing up on the left vs the right or whatever.
Test Plan: See screenshot.
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: chad, aran, sascha-egerer
Maniphest Tasks: T1344
Differential Revision: https://secure.phabricator.com/D7374
Summary:
While we mostly have reasonable effective object accessibility when you lock a user out of an application, it's primarily enforced at the controller level. Users can still, e.g., load the handles of objects they can't actually see. Instead, lock the queries to the applications so that you can, e.g., never load a revision if you don't have access to Differential.
This has several parts:
- For PolicyAware queries, provide an application class name method.
- If the query specifies a class name and the user doesn't have permission to use it, fail the entire query unconditionally.
- For handles, simplify query construction and count all the PHIDs as "restricted" so we get a UI full of "restricted" instead of "unknown" handles.
Test Plan:
- Added a unit test to verify I got all the class names right.
- Browsed around, logged in/out as a normal user with public policies on and off.
- Browsed around, logged in/out as a restricted user with public policies on and off. With restrictions, saw all traces of restricted apps removed or restricted.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7367
Summary: Ref T4010. Adds storage and indexes for custom fields. These tables are the same as people/maniphest/differential.
Test Plan: Ran `bin/storage upgrade`.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T4010
Differential Revision: https://secure.phabricator.com/D7369
Summary:
Fixes T3675.
- Maniphest had a couple of old non-event listeners; move them to events.
- Make most of the similar listeners a little more similar.
- Add checks for access to the application.
Test Plan:
- Viewed profile, project, task, revision.
- Clicked all the actions.
- Blocked access to various applications and verified the actions vanished.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3675
Differential Revision: https://secure.phabricator.com/D7365
Summary:
Ref T3675. Some of these listeners shouldn't do their thing if the viewer doesn't have access to an application (for example, users without access to Differential should not be able to "Edit Tasks"). Set the stage for that:
- Introduce `PhabricatorEventListener`, which has an application.
- Populate this for event listeners installed by applications.
- Rename the "PeopleMenu" listeners to "ActionMenu" listeners, which better describes their modern behavior.
This doesn't actually change any behaviors.
Test Plan: Viewed Maniphest, Differntial, People.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3675
Differential Revision: https://secure.phabricator.com/D7364
Summary:
Fixes T2146. This is a really simple approach, you just do:
!print .rule {
whatever: blah;
}
And it transforms it into:
.printable .rule {
whatever: blah;
}
@media print {
.rule {
whatever: blah;
}
}
So we end up with these rules twice, but they should compress well and we shouldn't need that many of them, and this fix is way way simpler than all the nonsense I discussed in T2146.
Test Plan:
- Added a unit test.
- Added a simple rule to throw away the menubar when printing.
- Checked the latter with `/?__print__=1`.
Reviewers: chad, btrahan
Reviewed By: chad
CC: chad, aran
Maniphest Tasks: T2146
Differential Revision: https://secure.phabricator.com/D7363
Summary:
Ref T2222. This implements step (1) described there, which is moving over all the inline comments.
The old and new tables are simliar. The only real trick here is that `transactionPHID` and `legacyCommentID` mean roughly the same thing (`null` if the inline is a draft, non-null if it has been submitted) but we don't have real `transactionPHID`s yet. We just make some up -- we'll backfill them later.
Two risks here:
- I need to take a second look at the keys on this table. I think we need to tweak them a bit, and it will be less disruptive to do that before this migration than after.
- This will take a while for Facebook, and other large installs with tens of thousands of revisions. I'll communicate this.
I'm otherwise pretty satisfied with this, seems to work well and is pretty low risk / non-disruptive.
Test Plan:
- Before migrating, then after migrating:
- Made a bunch of inlines (drafts, submitted).
- Edited and deleted inlines.
- Verified inlines showed up in preview.
- Verified that inlines aren't indexed when they're drafts (`bin/search index D935`).
- Verified that inlines ARE indexed when they're not drafts.
- Verified that drafts inlines make revisions appear as "with draft" in the revision list.
- Made left, right, and draft inlines.
- Migrated (`bin/storage upgrade`).
- Verified that my inlines from before the migration still showed up.
- (Repeated all the stuff above.)
- Manually inspected the inline comment table.
Reviewers: btrahan
Reviewed By: btrahan
CC: FacebookPOC, aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D7139
Summary: This data was migrated by D6977 and is now obsolete. I'll hold this patch for a week or two in case we get reports of migration errors.
Test Plan: Ran storage upgrade, saw the table vanish. Grepped for references to the table.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6997
Summary: Believe it or not, I forgot how to create a link in Remarkup.
Test Plan: Clicked on it with selected URL, selected text and without a selection.
Reviewers: chad, epriestley
Reviewed By: epriestley
CC: epriestley, aran, chad
Differential Revision: https://secure.phabricator.com/D7336
Summary:
Ref T603. Currently, we render handles the user doesn't have permission to see in a manner identical to handles that don't exist. This is confusing, and not required by policies (which restrict content, but permit knowledge that an object exists).
Instead, render them in different styles. Bad/invalid objects look like:
Unknown Object (Task)
Restricted objects look like:
[o] Restricted Task
...where `[o]` is the padlock icon.
Test Plan:
{F71100}
{F71101}
It's possible this renders weird somewhere, but I wasn't immediately able to find any issues. Yell if you see something.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: chad, aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7334
Summary: Makes it easy to choose distinctive icons for projects.
Test Plan:
{F71018}
{F71020}
{F71019}
{F71021}
Reviewers: btrahan, chad
Reviewed By: chad
CC: chad, aran
Differential Revision: https://secure.phabricator.com/D7333
Test Plan: Translated 'bold text' as 'txt', clicked on B without selection, saw 'txt'.
CC: epriestley, aran
Differential Revision: https://secure.phabricator.com/D7335
Summary: Ref T603. Give countdowns proper UI-level policy controls, and an application-level default policy. Put policy information in the header.
Test Plan:
- Adjusted default policy.
- Created new countdowns.
- Edited countdowns.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7322
Summary:
Ref T603. Several issues here:
1. Currently, `FileQuery` does not actually respect object attachment edges when doing policy checks. Everything else works fine, but this was missing an `array_keys()`.
2. Once that's fixed, we hit a bunch of recursion issues. For example, when loading a User we load the profile picture, and then that loads the User, and that loads the profile picture, etc.
3. Introduce a "Query Workspace", which holds objects we know we've loaded and know we can see but haven't finished filtering and/or attaching data to. This allows subqueries to look up objects instead of querying for them.
- We can probably generalize this a bit to make a few other queries more efficient. Pholio currently has a similar (but less general) "mock cache". However, it's keyed by ID instead of PHID so it's not easy to reuse this right now.
This is a bit complex for the problem being solved, but I think it's the cleanest approach and I believe the primitive will be useful in the future.
Test Plan: Looked at pastes, macros, mocks and projects as a logged-in and logged-out user.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7309
Summary:
Ref T603. This cleans up an existing callsite in the policy filter, and opens up some stuff in the future.
Some policy objects don't have real PHIDs:
PhabricatorTokenGiven
PhabricatorSavedQuery
PhabricatorNamedQuery
PhrequentUserTime
PhabricatorFlag
PhabricatorDaemonLog
PhabricatorConduitMethodCallLog
ConduitAPIMethod
PhabricatorChatLogEvent
PhabricatorChatLogChannel
Although it would be reasonable to add real PHIDs to some of these (like `ChatLogChannel`), it probably doesn't make much sense for others (`DaemonLog`, `MethodCallLog`). Just let them return `null`.
Also remove some duplicate `$id` and `$phid` properties. These are declared on `PhabricatorLiskDAO` and do not need to be redeclared.
Test Plan: Ran the `testEverythingImplemented` unit test, which verifies that all classes conform to the interface.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7306
Summary: A set of random icons for use as project identifiers. 42, white.
Test Plan: photoshop, epriestley
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7290
Summary: This builds out and implements PHUIPropertyListView (container) and PHUIPropertyListItemView (section) as well as adding tabs.
Test Plan: Tested each page I edited with the exception of Releeph and Phortune, though those changes look ok to me diff wise. Updated examples page with tabs.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7283
Summary:
Ref T603. Ref T1279. Further improves transaction and policy support for Herald.
- Instead of deleting rules (which wipes out history and can't be undone) allow them to be disabled.
- Track disables with transactions.
- Gate disables with policy controls.
- Show policy and status information in the headers.
- Show transaction history on rule detail screens.
- Remove the delete controller.
- Support disabled queries in the ApplicationSearch.
Test Plan:
- Enabled and disabled rules.
- Searched for enabled/disabled rules.
- Verified disabled rules don't activate.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1279, T603
Differential Revision: https://secure.phabricator.com/D7247
Summary:
Ref T1279. No actual logical changes, but:
- You can now add projects as reviewers from the revision view typeahead ("Add Reviewers" action).
- You can now add projects as reviewers from the revision detail typeahead.
- You can now add projects as reviewers from the CLI (`#yoloswag`).
- Generated commit messages now list project reviewers (`Reviewers: #yoloswag`).
I'll separate projects from users in the "Reviewers" tables in the next revision.
Test Plan:
- Added projects as reviewers using the web UI and CLI.
- Used `arc amend --show --revision Dnnn` to generate commit messages.
- Viewed revision with project reviewers in web UI.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1279
Differential Revision: https://secure.phabricator.com/D7230
Summary:
Ref T1279. This came to me in a dream.
The existing `differential_relationship` table has an `(objectPHID, type)` column, which theoretically is useful for queries like "revisions with X as a reviewer". In practice, I'm not sure it gets used much, but I can get it to show up in at least some query plans.
Add a similar index to the `edge` table. This sequences //before// D7227, which actually migrates the data.
Test Plan:
- Ran `bin/storage upgrade`.
- EXPLAIN'd a bunch of queries against different versions of the schema, this seemed helpful overall.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1279
Differential Revision: https://secure.phabricator.com/D7232
Conflicts:
src/infrastructure/storage/patch/PhabricatorBuiltinPatchList.php
Summary:
Ref T603. I had to partially revert this earlier because it accidentally blocked access to Conduit and File data for installs without "policy.allow-public", since the applications are available to "all users" but some endpoints actually need to be available even when not logged in.
This readjusts the gating in the controller to properly apply application visibility restrictions, and then adds a giant pile of unit test coverage to make sure it sticks and all the weird cases are covered.
Test Plan:
- Added and executed unit tests.
- Executed most of the tests manually, by using logged in / admin / public / disabled users.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7211
Summary: Ref T603. Make this rule properly policy-aware, and extend from `PhabricatorRemarkupRuleObject`.
Test Plan:
- Embedded an image, tested all options (name, link, float, layout, size).
- Used lightbox to view several images.
- Embedded a text file, tested all options (name).
- Embedded audio, tested all options (loop, autoplay).
- Attached a file via comment to a task, verified edge was created.
- Attached a file via comment to a conpherence, verified edge was created.
- Viewed old files, verified remarkup version bump rendered them correctly.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7192
Summary:
Ref T603. Principally, I want to implement the rule "when you upload a file to an object, users must be able to see the object in order to see the file", since I think this is strongly in line with user expectation. For example, if you attach a file to a Conpherence, it should only be visible to members of that thread.
This adds storage for policies, but doesn't do anything interesting with it yet.
Test Plan: Ran `bin/storage upgrade`.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7175
Summary: This adds the 'PHUIObjectBox' to nearly every place that should get it. I need to comb through Diffusion a little more. I've left Differential mostly alone, but may decide to do it anyways this weekend. I'm sure I missed something else, but these are easy enough to update.
Test Plan: tested each new layout.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D7162
Summary: Ref T3887. Implements storage and editors, but not the actual audio part.
Test Plan: Edited audio, audio behaviors of macros. Transactions and email looked good. Hit error cases.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3887
Differential Revision: https://secure.phabricator.com/D7159
Summary:
Ref T603. This could probably use a little more polish, but improve the quality of policy error messages.
- Provide as much detail as possible.
- Fix all the strings for i18n.
- Explain special rules to the user.
- Allow indirect policy filters to raise policy exceptions instead of 404s.
Test Plan: See screenshots.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7151
Summary:
Ref T2222. This sequences //before// D7139 and sorts out keys on the table. In particular:
- There was a fairly silly `draft` key modeled after Pholio; drop it.
- Add a `revisionPHID` key. This is queried mostly-transitionally on the revision view screen.
- Add a `changesetID` key. This is queried by a bunch of interfaces that want more surgical results than `revisionPHID` provides.
- Add an `authorPHID, transactionPHID` key. This is queried on the list interface to find pending drafts.
- Add a `legacy` key. This is queried by the feed publisher.
Test Plan: Used the query analyzer to hit all (I think?) of the pages, saw keyed queries.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D7140
Summary: Ref T603. Paves the way for policy controls.
Test Plan: Ran storage upgrade, bumbled around in Differential.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7133
Summary: Ref T603. Move to real Query classes.
Test Plan:
- Ran `phd debug pull X` (where `X` does not match a repository).
- Ran `phd debug pull Y` (where `Y` does match a repository).
- Ran `phd debug pull`.
- Ran `repository pull`.
- Ran `repository pull X`.
- Ran `repository pull Y`.
- Ran `repository discover`.
- Ran `repository delete`.
- Ran `grep`.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7137
Summary:
Ref T603. Make almost every task read policy-aware. Notable exceptions are:
- Edge editor -- this stuff is prescreened and should be moved to ApplicationTransactions eventually anyway.
- Search/attach stuff -- this stuff needs some general work. The actual list should be fine since you can't pull handles. There may be a very indirect hole here where you could attach an object you can't see (but do know the ID of) to an object you can see. Pretty fluff.
- The "Tasks" field in Differential will let you reference objects you can't see. Possibly this is desirable, in the case of commandeering revisions. Mostly, it was inconvenient to get a viewer (I think).
Test Plan:
- Called `maniphest.info`.
- Called `maniphest.update`.
- Batch edited tasks.
- Dragged and dropped tasks to change subpriority.
- Subscribed and unsubscribed from a task.
- Edited a task.
- Created a task.
- Created a task with a parent.
- Created a task with a template.
- Previewed a task update.
- Commented on a task.
- Added a dependency.
- Searched for "T33" in object search dialog.
- Created a branch "T33", ran `arc diff`, verified link.
- Pushed a commit with "Fixes T33", verified close.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7119
Summary: Ref T2217. Fixes T3866. We need to do a little more massaging before we can set strings as the value on datetime controls.
Test Plan: Set default to "1:23 AM", "2001/02/03".
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2217, T3866
Differential Revision: https://secure.phabricator.com/D7116
Summary: Ref T2217. Render feed stories like "alincoln updated T123" instead of "alincoln updated this task.". Fix up some more translations.
Test Plan: Looked at feed, saw something a bit more reasonable.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2217
Differential Revision: https://secure.phabricator.com/D7108
Summary:
Fixes T3867. We currently show more empty custom field values on task detail pages than we should, for at least two reasons:
- `<select />` fields with an empty string option store `""`, but users reasonably expect this to mean "no value".
- Old fields may have stored empty strings, and migrated forward.
This fix generally aligns behavior with user expectations. We could get more extreme about not storing `""` in the database, but I think this is generally a less surpsing fix.
Test Plan: Made a select with a `"" : "None"` option, selected it, saw it vanish from task detail screen.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3867
Differential Revision: https://secure.phabricator.com/D7105
Summary:
Ref T2217. Fixes T3876. We incorrectly have a unique key on `(authorPHID, transactionPHID)`, which prevents saving multiple versions of a comment.
I'm not entirely sure why this exists. I think it came from Pholio (where it works for inlines, because it has an additional component, but maybe should be adjusted) but we might need to wipe it out of more apps too.
Test Plan: Edited a comment in Maniphest.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2217, T3876
Differential Revision: https://secure.phabricator.com/D7102
Summary: Ref T2217. Cleans up some of the "attached %d file(s)" stuff.
Test Plan: Generated some of these transactions and verified they render more naturally.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T2217
Differential Revision: https://secure.phabricator.com/D7096
Summary: Ref T2217. Cleans up the table names. Moves old data to `maniphest_transaction_legacy`. We'll drop that eventually once it's more clear that I didn't break the world.
Test Plan: Did reads/writes to/from these tables.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2217
Differential Revision: https://secure.phabricator.com/D7094
Summary:
Ref T2217. Ship "Merge in Duplicates" through the new editor. The only notable thing here is `setContinueOnMissingFields()`.
The problem this solves is that if you add a custom field and mark it as required, all existing tasks are "invalid" since they don't have a value, and trying to edit them will raise an error like "Some Custom Field is required!". This is fine for normal edits via the UI, since the user can just select/provide a value, but surgical edits to specific fields should just ignore these errors. Add the ability to ignore these errors and use it on all the field-speific editors.
Test Plan: Merged duplicates, including "invalid" duplicates with missing fields.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2217
Differential Revision: https://secure.phabricator.com/D7084
Summary: Ref T2217. Route transaction rendering through modern code. This just affects the detail page. Some rough edges but nothing significant.
Test Plan: See screenshot.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2217
Differential Revision: https://secure.phabricator.com/D7070
Summary:
Ref T2217. This is the risky, hard part; everything after this should be smooth sailing. This is //mostly// clean, except:
- The old format would opportunistically combine a comment with some other transaction type if it could. We no longer do that, so:
- When migrating, "edit" + "comment" transactions need to be split in two.
- When editing now, we should no longer combine these transaction types.
- These changes are pretty straightforward and low-impact.
- This migration promotes "auxiliary field" data to the new CustomField/StandardField format, so that's not a straight migration either. The formats are very similar, though.
Broadly, this takes the same attack that the auth migration did: proxy all the code through to the new storage. `ManiphestTransaction` is now just an API on top of `ManiphestTransactionPro`, which is the new storage format. The two formats are very similar, so this was mostly a straight copy from one table to the other.
Test Plan:
- Without performing the migration, made a bunch of edits and comments on tasks and verified the new code works correctly.
- Droped the test data and performed the migration.
- Looked at the resulting data for obvious discrepancies.
- Looked at a bunch of tasks and their transaction history.
- Used Conduit to pull transaction data.
- Edited task description and clicked "View Details" on transaction.
- Used batch editor.
- Made a bunch more edits.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2217
Differential Revision: https://secure.phabricator.com/D7068
Summary: Ref T2217. Add the tables and comment class for the new stuff. Not used yet.
Test Plan: Ran storage upgrade, browsed Maniphest.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2217
Differential Revision: https://secure.phabricator.com/D7066
Summary: Fixes T3864. If you define a "bool" control but don't define a
corresponding "strings", we currently fatal when trying to `idx()` into
`null`.
Auditors: btrahan
Summary:
Ref T603. See inlines for an explanation. The case where I hit this was loading the "Pending Differential Revisions" panel in Diffusion when logged out, after making a repository public.
What happens is that we load 10 revisions (say, D1 .. D10) but the user can't see any of them. We then try to load the next 10, but since the pagination is ordered by date modified, we need to base the next query on the modified date of the last thing we loaded (D10). However, since we use the viewer's policies to load that cursor object, it fails to load, and then we just issue the same query over and over again, loading D1 .. D10 until we run out of execution time.
Test Plan: Interface now loads correctly.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7059
Summary: Improves transaction rendering for custom fields and standard custom fields.
Test Plan: See screenshot.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7054
Summary:
- Add some TODO'd keys.
- Add policy fields.
Test Plan: Viewed repositories; created a new repository and verified it got the right default policy settings.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7056
Summary: We aren't setting the value for select fields correctly, so when
editing they always show the first value instead of the correct value.
Test Plan: Set task from Apple -> Banana and Carrot -> Potato, saved, hit
"Edit", saw Banana / Potato.
Auditors: btrahan
Summary: Ref T3794. Drop auxiliary field, use standard field.
Test Plan: Performed migration, field seemed to survive it intact. Edited and viewed tasks.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3794
Differential Revision: https://secure.phabricator.com/D7036
Summary: Makes Maniphest look more like standard fields to make the migration easier.
Test Plan: Edited tasks and users with required and invalid fields.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7035
Summary: Final standard capability from Maniphest fields.
Test Plan: This isn't really reachable now since users always exist, but faked it and verified the field prefilled as expected.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7033
Summary:
Ref T418. This is fairly messy, but basically:
- Add a validation phase to TransactionEditor.
- Add a validation phase to CustomField.
- Bring it to StandardField.
- Add validation logic for the int field.
- Provide support in related classes.
Test Plan: See screenshot.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T418
Differential Revision: https://secure.phabricator.com/D7028
Summary: Support captions, so this can replace the Maniphest version.
Test Plan: See screenshot.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7020
Summary: Ref T418. This is the last of the Maniphest field types, although I have a few more capabilities/options to port over.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: chad, aran
Maniphest Tasks: T418
Differential Revision: https://secure.phabricator.com/D7018
Summary: These end up a little weird with subclassing instead of `switch`, but some day we could alias them to one another or something I guess. If I'm feeling brave, I might get rid of the "user" variant when I migrate Maniphest custom field specs, and turn it into "users, limit = 1" or something like that.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7010
Summary: See previous revisions. As maniphest.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7009
Summary: See D7006, etc. This one's easy since exposing it to ApplicationSearch doesn't make much sense.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7008
Summary: See D7006, etc. Brings this from Maniphest.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7007
Summary:
Currently, `ManiphestAuxiliaryFieldDefaultSpecification` uses about a dozen giant `switch` statements to implement stadard field types (int, string, date, bool, select, user, remarkup, etc). This is:
- pretty gross;
- not extensible; and
- doesn't really let us share that much code.
I got about halfway through porting a similar implementation into StandardField but I wasn't thrilled with it. Subclass StandardField instead to implement custom field types.
Test Plan: Added an "int" custom field, verified it had integer semantics and indexed into the integer index.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7005
Summary: Ref T418. Moves data from the Maniphest-specific table to the general one. This patch is a bit gross, but mostly about getting the reads and writes aimed correctly. Future patches will clean things up.
Test Plan: Migrated data across formats. Verified it survied the migration. Viewed and edited tasks' custom fields.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T418
Differential Revision: https://secure.phabricator.com/D6999
Summary: Ref T418. Maniphest has an obsolete class-based field selector. Replace it with CustomField-based selectors, which use the nice config UI and are generally way easier to use.
Test Plan: Added custom fields; edited and viewed custom fields on tasks. Everything worked as expected.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T418
Differential Revision: https://secure.phabricator.com/D6998
Summary: Ref T418. Depends on D6992. This adds index and value storage for Maniphest custom fields.
Test Plan: Ran storage upgrade.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T418
Differential Revision: https://secure.phabricator.com/D6995
Summary:
Ref T2625. Ref T3794. Ref T418. Ref T1703.
This is a more general version of D5278. It expands CustomField support to include real integration with ApplicationSearch.
Broadly, custom fields may elect to:
- build indicies when objects are updated;
- populate ApplicationSearch forms with new controls;
- read inputs entered into those controls out of the request; and
- apply constraints to search queries.
Some utility/helper stuff is provided to make this easier. This part could be cleaner, but seems reasonable for a first cut. In particular, the Query and SearchEngine must manually call all the hooks right now instead of everything happening magically. I think that's fine for the moment; they're pretty easy to get right.
Test Plan:
I added a new searchable "Company" field to People:
{F58229}
This also cleaned up the disable/reorder view a little bit:
{F58230}
As it did before, this field appears on the edit screen:
{F58231}
However, because it has `search`, it also appears on the search screen:
{F58232}
When queried, it returns the expected results:
{F58233}
And the actually good bit of all this is that the query can take advantage of indexes:
mysql> explain SELECT * FROM `user` user JOIN `user_customfieldstringindex` `appsearch_0` ON `appsearch_0`.objectPHID = user.phid AND `appsearch_0`.indexKey = 'mk3Ndy476ge6' AND `appsearch_0`.indexValue IN ('phacility') ORDER BY user.id DESC LIMIT 101;
+----+-------------+-------------+--------+-------------------+----------+---------+------------------------------------------+------+----------------------------------------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra |
+----+-------------+-------------+--------+-------------------+----------+---------+------------------------------------------+------+----------------------------------------------+
| 1 | SIMPLE | appsearch_0 | ref | key_join,key_find | key_find | 232 | const,const | 1 | Using where; Using temporary; Using filesort |
| 1 | SIMPLE | user | eq_ref | phid | phid | 194 | phabricator2_user.appsearch_0.objectPHID | 1 | |
+----+-------------+-------------+--------+-------------------+----------+---------+------------------------------------------+------+----------------------------------------------+
2 rows in set (0.00 sec)
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T418, T1703, T2625, T3794
Differential Revision: https://secure.phabricator.com/D6992
Summary: Ref T2625. EVERYONE LOVES MIGRATIONS!!!
Test Plan:
- Created and migrated a query with every field, verified results were preserved.
- Created and migrated a query using "noproject" and "upforgrabs" magic, verified results were preserved.
Here's the pre-migration "everything" query:
{F58110}
Here it is after migration:
{F58111}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2625
Differential Revision: https://secure.phabricator.com/D6977
