Summary:
Via HackerOne. In regular expressions, "$" matches "end of input, or before terminating newline". This means that the expression `/^A$/` matches two strings: `"A"`, and `"A\n"`.
When we care about this, use `\z` instead, which matches "end of input" only.
This allowed registration of `"username\n"` and similar.
Test Plan:
- Grepped codebase for all calls to `preg_match()` / `preg_match_all()`.
- Fixed the ones where this seemed like it could have an impact.
- Added and executed unit tests.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: aran, epriestley
Differential Revision: https://secure.phabricator.com/D8516
Summary:
There are quite a few tests in Arcanist, libphutil and Phabricator that do something similar to `$this->assertEqual(false, ...)` or `$this->assertEqual(true, ...)`.
This is unnecessarily verbose and it would be cleaner if we had `assertFalse` and `assertTrue` methods.
Test Plan: I contemplated adding a unit test for the `getCallerInfo` method but wasn't sure if it was required / where it should live.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D8460
Summary: Ref T4195. Stores remote address and protocol in the logs, where possible.
Test Plan: Pushed some stuff, looked at the log, saw data.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7711
Summary: Ref T4189. Fixes T2066. Mercurial has a //lot// of hooks so I'm not 100% sure this is all we need to install (we may need separate hooks for tags/bookmarks) but it should cover most of what we're after at least.
Test Plan:
- `bin/repository pull`'d a Mercurial repo and got a hook install.
- Pushed to a Mercurial repository over SSH and HTTP, with good/bad hooks. Saw hooks fire.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2066, T4189
Differential Revision: https://secure.phabricator.com/D7685
Summary:
Ref T4189. This adds SVN support, which was a little more messy than I though. Principally, we can not use `PHABRICATOR_USER` for Subversion, because it strips away the entire environment for "security reasons".
Instead, use `--tunnel-user` plus `svnlook author` to figure out the author.
Also fix "ssh://" clone URIs, which needs to be "svn+ssh://".
Test Plan:
- Made SVN commits through the hook.
- Made Git commits, too, to make sure I didn't break anything.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4189
Differential Revision: https://secure.phabricator.com/D7683
Summary:
Ref T4189. T4189 describes most of the intent here:
- When updating hosted repositories, sync a pre-commit hook into them instead of doing a `git fetch`.
- The hook calls into Phabricator. The acting Phabricator user is sent via PHABRICATOR_USER in the environment. The active repository is sent via CLI.
- The hook doesn't do anything useful yet; it just veifies basic parameters, does a little parsing, and exits 0 to allow the commit.
Test Plan:
- Performed Git pushes and pulls over SSH and HTTP.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4189
Differential Revision: https://secure.phabricator.com/D7682
Summary:
Ref T2230. When fully set up, we have up to three users who all need to write into the repositories:
- The webserver needs to write for HTTP receives.
- The SSH user needs to write for SSH receives.
- The daemons need to write for "git fetch", "git clone", etc.
These three users don't need to be different, but in practice they are often not likely to all be the same user. If for no other reason, making them all the same user requires you to "git clone httpd@host.com", and installs are likely to prefer "git clone git@host.com".
Using three different users also allows better privilege separation. Particularly, the daemon user can be the //only// user with write access to the repositories. The webserver and SSH user can accomplish their writes through `sudo`, with a whitelisted set of commands. This means that even if you compromise the `ssh` user, you need to find a way to escallate from there to the daemon user in order to, e.g., write arbitrary stuff into the repository or bypass commit hooks.
This lays some of the groundwork for a highly-separated configuration where the SSH and HTTP users have the fewest privileges possible and use `sudo` to interact with repositories. Some future work which might make sense:
- Make `bin/phd` respect this (require start as the right user, or as root and drop privileges, if this configuration is set).
- Execute all `git/hg/svn` commands via sudo?
Users aren't expected to configure this yet so I haven't written any documentation.
Test Plan:
Added an SSH user ("dweller") and gave it sudo by adding this to `/etc/sudoers`:
dweller ALL=(epriestley) SETENV: NOPASSWD: /usr/bin/git-upload-pack, /usr/bin/git-receive-pack
Then I ran git pushes and pulls over SSH via "dweller@localhost". They successfully interacted with the repository on disk as the "epriestley" user.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7589
Summary:
Ref T2230. Very rarely, even though we've flushed the connection and sent all the data, we'll close the connection before Git is happy with it and it will flip out with an error like this:
fatal: The remote end hung up unexpectedly
fatal: early EOF
fatal: index-pack failed
This is hard to reproduce because it depends on the order of read/write operations we can't directly control. I only saw it about 2% of the time, by just running `git pull` over and over again.
Waiting for Git to close its side of the connection seems to fix it.
Test Plan: Ran `git clone` a ton of times without seeing the error again. Ran `git push` a ton of times with new commits.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7558
Summary:
Ref T2230. The SVN protocol has a sensible protocol format with a good spec here:
http://svn.apache.org/repos/asf/subversion/trunk/subversion/libsvn_ra_svn/protocol
Particularly, compare this statement to the clown show that is the Mercurial wire protocol:
> It is possible to parse an item without knowing its type in advance.
WHAT A REASONABLE STATEMENT TO BE ABLE TO MAKE ABOUT A WIRE PROTOCOL
Although it makes substantially more sense than Mercurial, it's much heavier-weight than the Git or Mercurial protocols, since it isn't distributed.
It's also not possible to figure out if a request is a write request (or even which repository it is against) without proxying some of the protocol frames. Finally, several protocol commands embed repository URLs, and we need to reach into the protocol and translate them.
Test Plan: Ran various SVN commands over SSH (`svn log`, `svn up`, `svn commit`, etc).
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7556
Summary:
Ref T2230. This is substantially more complicated than Git, but mostly because Mercurial's protocol is a like 50 ad-hoc extensions cobbled together. Because we must decode protocol frames in order to determine if a request is read or write, 90% of this is implementing a stream parser for the protocol.
Mercurial's own parser is simpler, but relies on blocking reads. Since we don't even have methods for blocking reads right now and keeping the whole thing non-blocking is conceptually better, I made the parser nonblocking. It ends up being a lot of stuff. I made an effort to cover it reasonably well with unit tests, and to make sure we fail closed (i.e., reject requests) if there are any parts of the protocol I got wrong.
A lot of the complexity is sharable with the HTTP stuff, so it ends up being not-so-bad, just very hard to verify by inspection as clearly correct.
Test Plan:
- Ran `hg clone` over SSH.
- Ran `hg fetch` over SSH.
- Ran `hg push` over SSH, to a read-only repo (error) and a read-write repo (success).
Reviewers: btrahan, asherkin
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7553
Summary:
Ref T2230. In Git, we can determine if a command is read-only or read/write from the command itself, but this isn't the case in Mercurial or SVN.
For Mercurial and SVN, we need to proxy the protocol that's coming over the wire, look at each request from the client, and then check if it's a read or a write. To support this, provide a more flexible version of `passthruIO`.
The way this will work is:
- The SSH IO channel is wrapped in a `ProtocolChannel` which can parse the the incoming stream into message objects.
- The `willWriteCallback` will look at those messages and determine if they're reads or writes.
- If they're writes, it will check for write permission.
- If we're good to go, the message object is converted back into a byte stream and handed to the underlying command.
Test Plan: Executed `git clone`, `git clone --depth 3`, `git push` (against no-write repo, got error), `git push` (against valid repo).
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, asherkin, aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7551
Summary:
Ref T2350. Fixes T2231.
- Adds log flags around discovery.
- Adds message flags for "needs update". This is basically an out-of-band hint to the daemons that a repository should be pulled sooner than normal. We set the flag when users push a revision, and expose a Conduit method that `arc land` will be able to use.
Test Plan: See screenshots.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2350, T2231
Differential Revision: https://secure.phabricator.com/D7467
Summary: Looks like this is pretty straightforward; same as the reads except mark it as needing PUSH.
Test Plan: Ran `git push`, pushed over SSH to a hosted repo.
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7425
Summary: Like D7423, but for SSH.
Test Plan: Ran `git clone ssh://...`, got a clone.
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7424
Summary:
- Add web UI for configuring SSH hosting.
- Route git reads (`git-upload-pack` over SSH).
Test Plan:
>>> orbital ~ $ git clone ssh://127.0.0.1/
Cloning into '127.0.0.1'...
Exception: Unrecognized repository path "/". Expected a path like "/diffusion/X/".
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
>>> orbital ~ $ git clone ssh://127.0.0.1/diffusion/X/
Cloning into 'X'...
Exception: No repository "X" exists!
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
>>> orbital ~ $ git clone ssh://127.0.0.1/diffusion/MT/
Cloning into 'MT'...
Exception: This repository is not available over SSH.
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
>>> orbital ~ $ git clone ssh://127.0.0.1/diffusion/P/
Cloning into 'P'...
Exception: TODO: Implement serve over SSH.
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7421
