Summary:
Ref T12822. Ref T13161. By default, when users select text from a diff and copy it to the clipboard, they get both sides of the diff and all the line numbers. This is usually not what they intended to copy.
As of D20188, we use `content: attr(...)` to render line numbers. No browser copies this text, so that fixes line numbers.
We can use "user-select" CSS to visually prevent selection of line numbers and other stuff we don't want to copy. In Firefox and Chrome, "user-select" also applies to copied text, so getting "user-select" on the right nodes is largely good enough to do what we want.
In Safari, "user-select" is only visual, so we always need to crawl the DOM to figure out what text to pull out of it anyway.
In all browsers, we likely want to crawl the DOM anyway because this will let us show one piece of text and copy a different piece of text. We probably want to do this in the future to preserve "\t" tabs, and possibly to let us render certain character codes in one way but copy their original values. For example, we could render "\x07" as "␇".
Finally, we have to figure out which side of the diff we're copying from. The rule here is:
- If you start the selection by clicking somewhere on the left or right side of the diff, that's what you're copying.
- Otherwise, use normal document copy rules.
So the overall flow here is:
- Listen for clicks.
- When the user clicks the left or right side of the diff, store what they clicked.
- When a selection starts, and something is actually selected, check if it was initiated by clicking a diff. If it was, apply a visual effect to get "user-select" where it needs to go and show the user what we think they're doing and what we're going to copy.
- (Then, try to handle a bunch of degenerate cases where you start a selection and then click inside that selection.)
- When a user clicks elsewhere or ends the selection with nothing selected, clear the selection mode.
- When a user copies text, if we have an active selection mode, pull all the selected nodes out of the DOM and filter out the ones we don't want to copy, then stitch the text back together. Although I believe this didn't work well in ~2010, it appears to work well today.
Test Plan: This mostly seems to work in Safari, Chrome, and Firefox. T12822 has some errata. I haven't tested touch events but am satisfied if the touch event story is anything better than "permanently destroys data".
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13161, T12822
Differential Revision: https://secure.phabricator.com/D20191
Summary:
Ref T13161. Ref T12822. Today, we use invisible Zero-Width Spaces to try to improve copy/paste behavior from Differential.
After D20188, we no longer need ZWS characters to avoid copying line numbers. Get rid of these secret invisible semantic ZWS characters completely.
This means that both the left-hand and right-hand side of diffs become copyable, which isn't desired. I'll fix that with a hundred thousand lines of Javascript in the next change: this is a step toward everything working better, but doesn't fix everything yet.
Test Plan:
- Grepped for `zws`, `grep -i zero | grep -i width`.
- Copied text out of Differential: got both sides of the diff (not ideal).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13161, T12822
Differential Revision: https://secure.phabricator.com/D20189
Summary:
Ref T13161. Ref T12822. See PHI870. Long ago, the web was simple. You could leave your doors unlocked, you knew all your neighbors, crime hadn't been invented yet, and `<th>3</th>` was a perfectly fine way to render a line number cell containing the number "3".
But times have changed!
- In PHI870, this isn't good for screenreaders. We can't do much about this, so switch to `<td>`.
- In D19349 / T13105 and elsewhere, this `::after { content: attr(data-n); }` approach seems like the least bad general-purpose approach for preventing line numbers from being copied. Although Differential needs even more magic beyond this in the two-up view, this is likely good enough for the one-up view, and is consistent with other views (paste, harbormaster logs, general source display) where this technique is sufficient on its own.
The chance this breaks //something// is pretty much 100%, but we've got a week to figure out what it breaks. I couldn't find any issues immediately.
Test Plan:
- Created, edited, deleted inlines in 1-up and 2-up views.
- Replied, keyboard-navigated, keyboard-replied, drag-selected, poked and prodded everything.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13161, T12822
Differential Revision: https://secure.phabricator.com/D20188
Summary:
Depends on D20181. Depends on D20182. Fixes T3498. Ref T13161. My claim, at least, is that D20181 can be tweaked to be good enough to throw away this "feature" completely.
I think this feature was sort of a mistake, where the ease of access to `diff -bw` shaped behavior a very long time ago and then the train just ran a long way down the tracks in the same direction.
Test Plan: Grepped for `whitespace`, deleted almost everything. Poked around the UI a bit. I'm expecting the whitespace changes to get some more iteration this week so I not being hugely pedantic about testing this stuff exhaustively.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13161, T3498
Differential Revision: https://secure.phabricator.com/D20185
Summary:
Ref T13161. See PHI723. Our whitespace handling is based on whitespace flags like `diff -bw`, mostly just for historical reasons: long ago, the easiest way to minimize the visual impact of indentation changes was to literally use `diff -bw`.
However, this approach is very coarse and has a lot of problems, like detecting `"ab" -> "a b"` as "only a whitespace change" even though this is always semantic. It also causes problems in YAML, Python, etc. Over time, we've added a lot of stuff to mitigate the downsides to this approach.
We also no longer get any benefits from this approach being simple: we need faithful diffs as the authoritative source, and have to completely rebuild the diff to `diff -bw` it. In the UI, we have a "whitespace mode" flag. We have the "whitespace matters" configuration.
I think ReviewBoard generally has a better approach to indent depth changes than we do (see T13161) where it detects them and renders them in a minimal way with low visual impact. This is ultimately what we want: reduce visual clutter for depth-only changes, but preserve whitespace changes in strings, etc.
Move toward detecting and rendering indent depth changes. Followup work:
- These should get colorblind colors and the design can probably use a little more tweaking.
- The OneUp mode is okay, but could be improved.
- Whitespace mode can now be removed completely.
- I'm trying to handle tabs correctly, but since we currently mangle them into spaces today, it's hard to be sure I actually got it right.
Test Plan: {F6214084}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13161
Differential Revision: https://secure.phabricator.com/D20181
Summary:
Ref T13249. See PHI810. We currently show availability dots in some interfaces (timeline, mentions) but not others (typeheads/tokenizers).
They're potentially quite useful in tokenizers, e.g. when assigning tasks to someone or requesting reviews. Show them in more places.
(The actual rendering here isn't terribly clean, and it would be great to try to unify all these various behaviors some day.)
Test Plan:
{F6212044}
{F6212045}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13249
Differential Revision: https://secure.phabricator.com/D20173
Summary:
Ref T13249. See PHI1059. This allows "locked" in `maniphest.statuses` to specify that either "comments" are locked (current behavior, advisory, overridable by users with edit permission, e.g. for calming discussion on a contentious issue or putting a guard rail on things); or "edits" are locked (hard lock, only task owner can edit things).
Roughly, "comments" is a soft/advisory lock. "edits" is a hard/strict lock. (I think both types of locks have reasonable use cases, which is why I'm not just making locks stronger across the board.)
When "edits" are locked:
- The edit policy looks like "no one" to normal callers.
- In one special case, we sneak the real value through a back channel using PolicyCodex in the specific narrow case that you're editing the object. Otherwise, the policy selector control incorrectly switches to "No One".
- We also have to do a little more validation around applying a mixture of status + owner transactions that could leave the task uneditable.
For now, I'm allowing you to reassign a hard-locked task to someone else. If you get this wrong, we can end up in a state where no one can edit the task. If this is an issue, we could respond in various ways: prevent these edits; prevent assigning to disabled users; provide a `bin/task reassign`; uh maybe have a quorum convene?
Test Plan:
- Defined "Soft Locked" and "Hard Locked" statues.
- "Hard Locked" a task, hit errors (trying to unassign myself, trying to hard lock an unassigned task).
- Saw nice new policy guidance icon in header.
{F6210362}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13249
Differential Revision: https://secure.phabricator.com/D20165
Summary:
See PHI1073. Improve the UX here:
- When there are a small number of connected tasks, no changes.
- When there are too many total connected tasks, but not too many directly connected tasks, show hint text with a "View Standalone Graph" button to view more of the graph.
- When there are too many directly connected tasks, show better hint text with a "View Standalone Graph" button.
- Always show a "View Standalone Graph" option in the dropdown menu.
- Add a standalone view which works the same way but has a limit of 2,000.
- This view doesn't have "View Standalone Graph" links, since they'd just link back to the same page, but is basically the same otherwise.
- Increase the main page task limit from 100 to 200.
Test Plan:
Mobile View:
{F6210326}
Way too much stuff:
{F6210327}
New persistent link to the standalone page:
{F6210328}
Kind of too much stuff:
{F6210329}
Standalone view:
{F6210330}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: 20after4
Differential Revision: https://secure.phabricator.com/D20164
Summary:
Ref T13249. See PHI774. When users follow an email login link ("Forgot password?", "Send Welcome Email", "Send a login link to your email address.", `bin/auth recover`), we send them to a password reset flow if an install uses passwords.
If an install does not use passwords, we previously dumped them unceremoniously into the {nav Settings > External Accounts} UI with no real guidance about what they were supposed to do. Since D20094 we do a slightly better job here in some cases. Continue improving this workflow.
This adds a page like "Reset Password" for "Hey, You Should Probably Link An Account, Here's Some Options".
Overall, this stuff is still pretty rough in a couple of areas that I imagine addressing in the future:
- When you finish linking, we still dump you back in Settings. At least we got you to link things. But better would be to return you here and say "great job, you're a pro".
- This UI can become a weird pile of buttons in certain configs and generally looks a little unintentional. This problem is shared among all the "linkable" providers, and the non-login link flow is also weird.
So: step forward, but more work to be done.
Test Plan: {F6211115}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13249
Differential Revision: https://secure.phabricator.com/D20170
Summary: Ref T13249. Poll for Duo updates in the background so we can automatically update the UI when the user clicks the mobile phone app button.
Test Plan: Hit a Duo gate, clicked "Approve" in the mobile app, saw the UI update immediately.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13249
Differential Revision: https://secure.phabricator.com/D20169
Summary:
Depends on D20140. Ref T13250. Currently, the top-level exception handler doesn't dump stacks because we might not be in debug mode, and we might double-extra-super fatal if we call `PhabricatorEnv:...` to try to figure out if we're in debug mode or not.
We can get around this by setting a flag on the Sink once we're able to confirm that we're in debug mode. Then it's okay for the top-level error handler to show traces.
There's still some small possibility that showing a trace could make us double-super-fatal since we have to call a little more code, but AphrontStackTraceView is pretty conservative about what it does and 99% of the time this is a huge improvement.
Test Plan: {F6205122}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13250
Differential Revision: https://secure.phabricator.com/D20142
Summary:
Depends on D20137. Ref T13250. Ref T12101. In versions of PHP beyond 7, various engine errors are gradually changing from internal fatals or internal errors to `Throwables`, a superclass of `Exception`.
This is generally a good change, but code written against PHP 5.x before `Throwable` was introduced may not catch these errors, even when the code is intended to be a top-level exception handler.
(The double-catch pattern here and elsewhere is because `Throwable` does not exist in older PHP, so `catch (Throwable $ex)` catches nothing. The `Exception $ex` clause catches everything in old PHP, the `Throwable $ex` clause catches everything in newer PHP.)
Generalize some `Exception` into `Throwable`.
Test Plan:
- Added a bogus function call to the rendering stack.
- Before change: got a blank page.
- After change: nice exception page.
{F6205012}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13250, T12101
Differential Revision: https://secure.phabricator.com/D20138
Summary:
Ref T13244. See PHI1059. When you lock a task, users who can edit the task can currently override the lock by using "Edit Task" if they confirm that they want to do this.
Mark these edits with an emblem, similar to the "MFA" and "Silent" emblems, so it's clear that they may have bent the rules.
Also, make the "MFA" and "Silent" emblems more easily visible.
Test Plan:
Edited a locked task, overrode the lock, got marked for it.
{F6195005}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: aeiser
Maniphest Tasks: T13244
Differential Revision: https://secure.phabricator.com/D20131
Summary: Ref T13244. See PHI1052. Our error handling for Stripe errors isn't great right now. We can give users a bit more information, and a less jarring UI.
Test Plan:
Before (this is in developer mode, production doesn't get a stack trace):
{F6197394}
After:
{F6197397}
- Tried all the invalid test codes listed here: https://stripe.com/docs/testing#cards
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13244
Differential Revision: https://secure.phabricator.com/D20132
Summary:
Depends on D20122. Fixes T8029. Adds an "Approve User" action to the "Manage" page.
Users are normally approved from the "Approval Queue", but if you click into a user's profile to check them out in more detail it kind of dead ends you right now. I've occasionally hit this myself, and think this workflow is generally reasonable enough to support upstream.
Test Plan: {F6193742}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T8029
Differential Revision: https://secure.phabricator.com/D20123
Summary:
Depends on D20026. Ref T13222. Ref T13231. The primary change here is that we'll no longer send you an SMS if you hit an MFA gate without CSRF tokens.
Then there's a lot of support for genralizing into Duo (and other push factors, potentially), I'll annotate things inline.
Test Plan: Implemented Duo, elsewhere.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13231, T13222
Differential Revision: https://secure.phabricator.com/D20028
Summary:
Depends on D20016. Ref T920. This does nothing interesting on its own since the TOTP provider has no guidance/warnings, but landing it separately helps to simplify an upcoming SMS diff.
SMS will have these guidance messages:
- "Administrator: you haven't configured any mailer which can send SMS, like Twilio."
- "Administrator: SMS is weak."
- "User: you haven't configured a contact number."
Test Plan: {F6151283} {F6151284}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T920
Differential Revision: https://secure.phabricator.com/D20017
Summary: Depends on D19992. Ref T13222. If administrators provide a custom login message, show it on the login screen.
Test Plan:
{F6137930}
- Viewed login screen with and without a custom message.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19994
Summary:
See PHI1023. Ref T7607. Occasionally, companies need their billing address (or some other custom text) to appear on invoices to satisfy process or compliance requirements.
Allow accounts to have a custom "Billing Name" and a custom "Billing Address" which appear on invoices.
Test Plan: {F6134707}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T7607
Differential Revision: https://secure.phabricator.com/D19979
Summary: See PHI1017. This is a trivial fix even though these burnups are headed toward a grisly fate.
Test Plan: Moused over some January datapoints, saw "1" instead of "0".
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19967
Summary:
Ref T13222. In D19918, I refactored how timelines get "view data". Today, this is always additional data about which images/changesets/diffs are visible on the current revision/commit/mock, so we can tell if inline comments should be linked to a `#anchor` on the same page (if the inline is rendered there somewhere) or to a `/D123?id=1&vs=2` full link on a different page (if it isn't), but in general this could be any sort of state information about the current page that affects how the timeline should render.
Previously, comment previews did not use any specialized object code and always rendered a "generic" timeline story. This was actually a bug, but none of the code we have today cares about this (since it's all inline related, and inlines render separately) so it never impacted anything.
After the `TimelineEngine` change, the preview renders with Differential-specific code. This is more correct, but we were not passing the preview the "view data" so it broke.
This preview doesn't actually need the view data and we could just make it bail out if it isn't present, but pass it through for consistency and so this works like we'd expect if we do something fancier with view data in the future.
Test Plan: Viewed comment and inline comment previews in Differential, saw old behavior restored.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19943
Summary:
Depends on D19906. Ref T13222. This isn't going to win any design awards, but make the "wait" and "answered" elements a little more clear.
Ideally, the icon parts could be animated Google Authenticator-style timers (but I think we'd need to draw them in a `<canvas />` unless there's some clever trick that I don't know) or maybe we could just have the background be like a "water level" that empties out. Not sure I'm going to actually write the JS for either of those, but the UI at least looks a little more intentional.
Test Plan:
{F6070914}
{F6070915}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19908
Summary:
Depends on D19914. Ref T11351. Some of the Phoilo rabbit holes go very deep.
`PhabricatorApplicationTransactionInterface` currently requires you to implement `willRenderTimeline()`. Almost every object just implements this as `return $timeline`; only Pholio, Diffusion, and Differential specialize it. In all cases, they are specializing it mostly to render inline comments.
The actual implementations are a bit of a weird mess and the way the data is threaded through the call stack is weird and not very modern.
Try to clean this up:
- Stop requiring `willRenderTimeline()` to be implemented.
- Stop requiring `getApplicationTransactionViewObject()` to be implemented (only the three above, plus Legalpad, implement this, and Legalpad's implementation is a no-op). These two methods are inherently pretty coupled for almost any reasonable thing you might want to do with the timeline.
- Simplify the handling of "renderdata" and call it "View Data". This is additional information about the current view of the transaction timeline that is required to render it correctly. This is only used in Differential, to decide if we can link an inline comment to an anchor on the same page or should link it to another page. We could perhaps do this on the client instead, but having this data doesn't seem inherently bad to me.
- If objects want to customize timeline rendering, they now implement `PhabricatorTimelineInterface` and provide a `TimelineEngine` which gets a nice formal stack.
This leaves a lot of empty `willRenderTimeline()` implementations hanging around. I'll remove these in the next change, it's just going to be deleting a couple dozen copies of an identical empty method implementation.
Test Plan:
- Viewed audits, revisions, and mocks with inline comments.
- Used "Show Older" to page a revision back in history (this is relevant for "View Data").
- Grepped for symbols: willRenderTimeline, getApplicationTransactionViewObject, Legalpad classes.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T11351
Differential Revision: https://secure.phabricator.com/D19918
Summary:
Ref T13222. See PHI996. Ref T10743. For context, perhaps see T12171.
Node changed some signatures, behaviors, and error handling here in recent versions. As far as I can tell:
- The `script.runInNewContext(...)` method has never taken a `path` parameter, and passing the path has always been wrong.
- The `script.runInNewContext(...)` method started taking an `[options]` parameter at some point, and validating it, so the bad `path` parameter now throws.
- `vm.createScript(...)` is "soft deprecated" but basically fine, and keeping it looks more compatible.
This seems like the smallest and most compatible correct change.
Test Plan: Under Node 10, started Aphlict. Before: fatal error on bad `options` parameter to `runInNewContext()` (expected dictionary). After: notification server starts.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222, T10743
Differential Revision: https://secure.phabricator.com/D19860
Summary:
Ref T13222. Fixes T12588. See PHI683. In several cases, we present the user with a choice between multiple major options: Alamnac service types, Drydock blueprint types, Repository VCS types, Herald rule types, etc.
Today, we generally do this with radio buttons and a "Submit" button. This isn't terrible, but often it means users have to click twice (once on the radio; once on submit) when a single click would be sufficient. The radio click target can also be small.
In other cases, we have a container with a link and we'd like to link the entire container: notifications, the `/drydock/` console, etc. We'd like to just link the entire container, but this causes some problems:
- It's not legal to link block eleements like `<a><div> ... </div></a>` and some browsers actually get upset about it.
- We can `<a><span> ... </span></a>` instead, then turn the `<span>` into a block element with CSS -- and this sometimes works, but also has some drawbacks:
- It's not great to do that for screenreaders, since the readable text in the link isn't necessarily very meaningful.
- We can't have any other links inside the element (e.g., details or documentation).
- We can `<form><button> ... </button></form>` instead, but this has its own set of problems:
- You can't right-click to interact with a button in the same way you can with a link.
- Also not great for screenreaders.
Instead, try adding a `linked-container` behavior which just means "when users click this element, pretend they clicked the first link inside it".
This gives us natural HTML (real, legal HTML with actual `<a>` tags) and good screenreader behavior, but allows the effective link target to be visually larger than just the link.
If no issues crop up with this, I'd plan to eventually use this technique in more places (Repositories, Herald, Almanac, Drydock, Notifications menu, etc).
Test Plan:
{F6053035}
- Left-clicked and command-left-clicked the new JS fanciness, got sensible behaviors.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13222, T12588
Differential Revision: https://secure.phabricator.com/D19855
Summary:
Ref T13216. See PHI985. If you disable cookies in Firefox, accessing `window.localStorage` throws an exception. Currently, this pretty much kills all scripts on the page.
Instead, catch and ignore this, as though `window.localStorage` was not defined.
Test Plan:
- Set Firefox to "no cookies".
- Loaded any page while logged out.
- Before: JS fatal early in the stack.
- After: page loads and JS works.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13216
Differential Revision: https://secure.phabricator.com/D19832
Summary:
Ref T13216. See PHI985. When you click a line number to start an inline comment, we intend to initiate the action only if you used the left mouse button (desktop) or a touch (tablet/device).
We currently have a `not right` condition for doing this, but it only excludes right clicks, not middle clicks (or other nth-button clicks). The `not right` condition was sligthly easier to write, but use an `is left` condition instead of a `not right` condition.
Test Plan:
- In Safari, Firefox and Chrome:
- Used left click to start an inline.
- Used middle click to do nothing (previously: started an inline).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13216
Differential Revision: https://secure.phabricator.com/D19836
Summary:
See PHI975. Ref T13216. Ref T2543. Previously, see D19204 and PHI433.
When you're acting on a draft revision, we change the button text to "Submit Quietly" as a hint that your actions don't generate notifications yet.
However, this isn't accurate when one of your actions is "Request Review", which causes the revision to publish.
Allow actions to override the submit button text, and make the "Request Review" action change the button text to "Publish Revision".
The alternative change I considered was to remove the word "Quietly" in all cases.
I'm not //thrilled// about how complex this change is to adjust one word, but the various pieces are all fairly clean individually. I'm not sure we'll ever be able to use it for anything else, but I do suspect that the word "Quietly" was the change in D19204 with the largest effect by far (see T10000).
Test Plan:
- Created a draft revision. Saw "Submit Quietly" text.
- Added a "Request Review" action, saw it change to "Publish Revision".
- Reloaded page, saw stack saved and "Publish Revision".
- Removed action, saw "Submit Quietly".
- Repeated on a non-draft revision, button stayed put as "Submit".
- Submitted the various actions, saw them have the desired effects.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13216, T2543
Differential Revision: https://secure.phabricator.com/D19810
Summary: See PHI977. Ref T13216. Some text, like long package names, may overflow hovercards. Add overflow CSS behaviors to remedy this.
Test Plan:
Before:
{F6012699}
After:
{F6012700}
(You can use `/search/hovercard/` to render hovercards in a handy standalone way.)
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13216
Differential Revision: https://secure.phabricator.com/D19809
Summary:
Fixes T8440. See that task for discussion.
Ref T13216. See PHI976.
Test Plan:
In Chrome, hovered a timestamp and moved the mouse up to the "overlap" area (see T8440). Before: flickered like crazy. After: no flickering.
(I couldn't reproduce the original issue in modern Firefox or Safari.)
Reviewers: amckinley, avivey
Reviewed By: avivey
Maniphest Tasks: T8440, T13216
Differential Revision: https://secure.phabricator.com/D19808
Summary:
See <https://hackerone.com/reports/434116>. Slowvote has a piece of Javascript that attempts to let you vote on `{V123}` polls inline.
It does not work: nothing ever triggers it (nothing renders a control with a `slowvote-option` sigil).
At least for now, just remove it. It has a completely separate pathway in the controller and both pathways are buggy, so this makes fixing them easier.
Test Plan: Voted in plurality and approval polls via Slowvote and the embedded widget.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19773
Summary:
Depends on D19661. Ref T13077. See PHI840.
When a user edits a page normally, add a "Save as Draft" button. Much of this change is around making that button render and behave properly: it needs to be an `<input type="submit" ...>` so browsers submit it and we can figure out which button the user clicked.
Then there are a few minor rules:
- If you're editing a page which is already a draft, we only give you "Save as Draft". This makes edits to update/revise a draft more natural.
- Highlight "Publish" if it's a likely action that you might want to take.
Internally, there are two types of edits. Both types create a new version with the new content. However:
- A "content" edit sets the version shown on the live page to the newly-created version.
- A "draft" edit does not update the version shown on the live page.
Test Plan: Edited a published document, edited the draft. Published documents. Reverted documents.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13077
Differential Revision: https://secure.phabricator.com/D19662
Summary:
Depends on D19659. Fixes T1894. Ref T13077. See PHI840.
- Add an EditEngine, although it currently supports no fields.
- Add (basic, top-level-only) commenting (we already had the table in the database).
This will probably create some issues. I'm most concerned about documents accumulating a ton of old, irrelevant comments over time which are hard to keep track of and no longer relevant. But I think this is probably a step forward in almost all cases, and a good thing on the balance.
This also moves us incrementally toward putting all editing on top of EditEngine.
Test Plan: {F5877347}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13077, T1894
Differential Revision: https://secure.phabricator.com/D19660
Summary: See PHI871. Ref T13197. These sections are only divided visually and don't have textual headers. Add aural headers.
Test Plan: {F5875471}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13197
Differential Revision: https://secure.phabricator.com/D19654
Summary:
Ref T13195. If a Phriction page begins with a code block, the `clear: both;` currently makes it clear the action list.
Instead, use table-cell layout on desktops.
Test Plan: Viewed a Phriction page with an initial code block on desktop/tablet/mobile/printable layouts. Now got more sensible layouts in all cases.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: GoogleLegacy
Maniphest Tasks: T13195
Differential Revision: https://secure.phabricator.com/D19649
Summary: Depends on D19621. Ref T13077. Fixes T4815. This adds previous/current/next/draft buttons and makes navigation between unpublished and published versions of a document more clear.
Test Plan: {F5841997}
Reviewers: amckinley
Maniphest Tasks: T13077, T4815
Differential Revision: https://secure.phabricator.com/D19622
Summary:
Depends on D19616. Ref T13077. Fixes T8172. In the last round of design updates, a lot of actions got stuffed into "Actions" menus.
I never really got used to these and think they're a net usability loss, and broadly agree with the feedback in T8172. I'd generally like to move back toward a state where actions are available on the page, not hidden in a menu.
For now, just put a curtain view on these pages. This could be refined later (e.g., stick this menu to the right hand side of the screen) depending on where other Phriction changes go.
(Broadly, I'm also not satisfied with where we ended up on the fixed-width pages like Diffusion > Manage, Config, and Instances. In contrast, I //do// like where we ended up with Phortune in terms of overall design. I anticipate revisiting some of this stuff eventually.)
Test Plan:
- Looked at Phriction pages on desktop/tablet/mobile/printable -- actions are now available on the page.
- Looked at other DocumentView pages (like Phame blogs) -- no changes for now.
Reviewers: amckinley
Maniphest Tasks: T13077, T8172
Differential Revision: https://secure.phabricator.com/D19617
Summary: Ref T13189. See PHI710. Ref T13088. Fixes T9951. Allow callers to `harbormaster.sendmessage` to specify that the test details are remarkup so they can use rich formatting and include links, files, etc.
Test Plan: {F5840098}
Reviewers: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13189, T13088, T9951
Differential Revision: https://secure.phabricator.com/D19615
Summary:
Ref T13187. See PHI836. The "action" comment actions in Differential (Accept, Reject, etc) render a single line of descriptive text. This is currently slightly misaligned.
Give it similar sizing information to the label element to the left, so it lines up properly.
Test Plan:
Note that "Request Review" and "This revision will be..." are now aligned:
{F5828077}
Reviewers: amckinley
Maniphest Tasks: T13187
Differential Revision: https://secure.phabricator.com/D19600
Summary:
Depends on D19594. See PHI823. Ref T13164.
- Add a label for the "X" button in comment areas, like "Remove Action: Change Subscribers".
- Add a label for the floating header display options menu in Differential.
- Add `role="button"` to `PHUIButtonView` objects that we render with an `<a ...>` tag.
Test Plan:
Viewed a revision with `?__aural__=true`:
- Saw "Remove Action: ..." label.
- Saw "Display Options" label.
- Used inspector to verify that some `<a class="button" ...>` now have `<a class="button" role="button" ...>`. This isn't exhaustive, but at least improves things. A specific example is the "edit", "reply", etc., actions on inline comments.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19595
Summary:
Ref T13164. See PHI748. Path validation has a 750ms timeout which blames to rP5038ab850c, in 2011.
Production path validation is sometimes taking more than 750ms, particularly on the initial page load where we may validate many paths simultaneously.
I have no idea why we have this timeout, and it isn't consistent with how we perform other AJAX requests. Just remove it.
Test Plan:
- Reproduced issue in production, saw all validation calls failing at 750ms. Actual underlying calls succeed, they just take more than 750ms to resolve.
- Loaded path validator locally, got green checkmark.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19575
Summary:
Ref T13164. See PHI693. In Differential, you can {nav View Options > View Standalone} to get a standalone view of a single changeset. You can also arrive here via the big changeset list for revisions affecting a huge number of files.
We currently suggest that all the keyboard shortcuts work, but some do not. In particular, the "Next File" and "Previous File" keyboard shortcuts (and some similar shortcuts) do not work. In the main view, the next/previous files are on the same page. In the standalone view, we'd need to actually change the URI.
Ideally, we should do this (and, e.g., put prev/next links on the page). As a first step toward that, hide the nonfunctional shortcuts to stop users from being misled.
Test Plan:
- Viewed a revision in normal and standalone views.
- No changes in normal view, and all keys still work ("N", "P", etc).
- In standalone view, "?" no longer shows nonfunctional key commands.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19571
Summary:
Depends on D19551. Ref T13164. Projects use a special kind of header setup that has a more specific CSS rule to make content black. Add an even more specific rule to make it red.
(This could probably be disentangled a bit and isn't necessarily the cleanest fix, but I poked at it for a few minutes and didn't come up with anything cleaner.)
Test Plan: Viewed projects in spaces, saw the space names colored red properly.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19552
Summary:
Ref T13151. See PHI685. When you haunt the panel, we only let it take up part of the screen. Let it take up slightly more of the screen so that it's more likely to fit completely on-screen without needing to scroll.
The behavior when it does scroll is fine (you get a scrollbar if your OS/browser is set up to show them) so this is a bit trivial/silly, but seems fine and doesn't have a big JS maintenance cost or anything.
Test Plan: Pressed "Z", resized my window to a weird tiny useless size, got slightly better (I guess) behavior.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13151
Differential Revision: https://secure.phabricator.com/D19480
Summary: Ref T13151. See PHI616. There's a bug where the current banner changeset isn't cleared correctly when we hide the banner.
Test Plan:
- View revision with several changesets.
- Scroll down slowly through first changeset until banner appears.
- Scroll up until banner disappears.
- Scroll back down.
- Before: banner fails to reappear (code still thinks it's visible and we don't want to update it).
- After: banner reappears correctly.
Reviewers: amckinley, jmeador
Reviewed By: jmeador
Maniphest Tasks: T13151
Differential Revision: https://secure.phabricator.com/D19474
Summary:
Fixes T13148. Ref T13105. The new document rendering engine for images let them overflow the UI bounds.
Add `max-width: 100%;` to keep them contained.
Test Plan:
- Viewed a very wide image in Safari, Firefox and Chrome. Saw sensible rendering.
- Also viewed a normal image, saw normal behavior.
Reviewers: amckinley, avivey
Reviewed By: avivey
Maniphest Tasks: T13148, T13105
Differential Revision: https://secure.phabricator.com/D19457
Summary:
Fixes T13147. In D19437, I changed this logic to support deleting the `""` (empty string) token, but `[].pop()` returns `undefined`, not `null`, if the list is empty and I didn't think to try deleting an empty input.
Fix the logic so we don't end up in a loop if the input is empty.
Test Plan:
- In any browser, deleted all tokens in a tokenizer; then pressed delete again.
- Before: tab hangs in an infinte loop.
- After: smooth sailing.
Reviewers: amckinley, avivey
Reviewed By: avivey
Maniphest Tasks: T13147
Differential Revision: https://secure.phabricator.com/D19456
Summary:
See PHI652. When you `echo x | arc paste` today, you end up with a Paste object that has the empty string as its "language".
This is normally not valid. Pastes where the language should be autodetected should have the value `null`, not the empty string.
This behavior likely changed when `paste.create` got rewritten in terms of `paste.edit`. Adjust the implementation so it only adds the LANGUAGE transaction if there's an actual language.
Also, fix an issue where you can't use the "delete" key to delete tokens with the empty string as their value.
Test Plan:
- Created a paste with `echo x | arc paste`, got a paste in autodetect mode instead of with a bogus language value.
- Created a paste with `echo x | arc paste --lang rainbow`, got a rainbow paste.
- Deleted an empty string token with the keyboard.
- Deleted normal tokens with the keyboard.
- Edited subscribers/etc normally with the keyboard and mouse to make sure I didn't ruin anything.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19437
