Summary: Ran `arc lint --apply-patches --everything` over rP, mainly to change double quotes to single quotes where appropriate. These changes also validate that the `ArcanistXHPASTLinter::LINT_DOUBLE_QUOTE` rule is working as expected.
Test Plan: Eyeballed it.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D9431
Summary:
Via HackerOne. In regular expressions, "$" matches "end of input, or before terminating newline". This means that the expression `/^A$/` matches two strings: `"A"`, and `"A\n"`.
When we care about this, use `\z` instead, which matches "end of input" only.
This allowed registration of `"username\n"` and similar.
Test Plan:
- Grepped codebase for all calls to `preg_match()` / `preg_match_all()`.
- Fixed the ones where this seemed like it could have an impact.
- Added and executed unit tests.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: aran, epriestley
Differential Revision: https://secure.phabricator.com/D8516
Summary: Ref T4195. Stores remote address and protocol in the logs, where possible.
Test Plan: Pushed some stuff, looked at the log, saw data.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7711
Summary:
Ref T4189. T4189 describes most of the intent here:
- When updating hosted repositories, sync a pre-commit hook into them instead of doing a `git fetch`.
- The hook calls into Phabricator. The acting Phabricator user is sent via PHABRICATOR_USER in the environment. The active repository is sent via CLI.
- The hook doesn't do anything useful yet; it just veifies basic parameters, does a little parsing, and exits 0 to allow the commit.
Test Plan:
- Performed Git pushes and pulls over SSH and HTTP.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4189
Differential Revision: https://secure.phabricator.com/D7682
Summary:
Ref T2230. When fully set up, we have up to three users who all need to write into the repositories:
- The webserver needs to write for HTTP receives.
- The SSH user needs to write for SSH receives.
- The daemons need to write for "git fetch", "git clone", etc.
These three users don't need to be different, but in practice they are often not likely to all be the same user. If for no other reason, making them all the same user requires you to "git clone httpd@host.com", and installs are likely to prefer "git clone git@host.com".
Using three different users also allows better privilege separation. Particularly, the daemon user can be the //only// user with write access to the repositories. The webserver and SSH user can accomplish their writes through `sudo`, with a whitelisted set of commands. This means that even if you compromise the `ssh` user, you need to find a way to escallate from there to the daemon user in order to, e.g., write arbitrary stuff into the repository or bypass commit hooks.
This lays some of the groundwork for a highly-separated configuration where the SSH and HTTP users have the fewest privileges possible and use `sudo` to interact with repositories. Some future work which might make sense:
- Make `bin/phd` respect this (require start as the right user, or as root and drop privileges, if this configuration is set).
- Execute all `git/hg/svn` commands via sudo?
Users aren't expected to configure this yet so I haven't written any documentation.
Test Plan:
Added an SSH user ("dweller") and gave it sudo by adding this to `/etc/sudoers`:
dweller ALL=(epriestley) SETENV: NOPASSWD: /usr/bin/git-upload-pack, /usr/bin/git-receive-pack
Then I ran git pushes and pulls over SSH via "dweller@localhost". They successfully interacted with the repository on disk as the "epriestley" user.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7589
Summary:
Ref T2230. The SVN protocol has a sensible protocol format with a good spec here:
http://svn.apache.org/repos/asf/subversion/trunk/subversion/libsvn_ra_svn/protocol
Particularly, compare this statement to the clown show that is the Mercurial wire protocol:
> It is possible to parse an item without knowing its type in advance.
WHAT A REASONABLE STATEMENT TO BE ABLE TO MAKE ABOUT A WIRE PROTOCOL
Although it makes substantially more sense than Mercurial, it's much heavier-weight than the Git or Mercurial protocols, since it isn't distributed.
It's also not possible to figure out if a request is a write request (or even which repository it is against) without proxying some of the protocol frames. Finally, several protocol commands embed repository URLs, and we need to reach into the protocol and translate them.
Test Plan: Ran various SVN commands over SSH (`svn log`, `svn up`, `svn commit`, etc).
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7556
Summary:
Ref T2230. In Git, we can determine if a command is read-only or read/write from the command itself, but this isn't the case in Mercurial or SVN.
For Mercurial and SVN, we need to proxy the protocol that's coming over the wire, look at each request from the client, and then check if it's a read or a write. To support this, provide a more flexible version of `passthruIO`.
The way this will work is:
- The SSH IO channel is wrapped in a `ProtocolChannel` which can parse the the incoming stream into message objects.
- The `willWriteCallback` will look at those messages and determine if they're reads or writes.
- If they're writes, it will check for write permission.
- If we're good to go, the message object is converted back into a byte stream and handed to the underlying command.
Test Plan: Executed `git clone`, `git clone --depth 3`, `git push` (against no-write repo, got error), `git push` (against valid repo).
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, asherkin, aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7551
Summary: Like D7423, but for SSH.
Test Plan: Ran `git clone ssh://...`, got a clone.
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7424
Summary:
- Add web UI for configuring SSH hosting.
- Route git reads (`git-upload-pack` over SSH).
Test Plan:
>>> orbital ~ $ git clone ssh://127.0.0.1/
Cloning into '127.0.0.1'...
Exception: Unrecognized repository path "/". Expected a path like "/diffusion/X/".
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
>>> orbital ~ $ git clone ssh://127.0.0.1/diffusion/X/
Cloning into 'X'...
Exception: No repository "X" exists!
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
>>> orbital ~ $ git clone ssh://127.0.0.1/diffusion/MT/
Cloning into 'MT'...
Exception: This repository is not available over SSH.
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
>>> orbital ~ $ git clone ssh://127.0.0.1/diffusion/P/
Cloning into 'P'...
Exception: TODO: Implement serve over SSH.
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7421
