Summary: No use sites left after D3513.
Test Plan: `grep`
Reviewers: pieter, starruler
Reviewed By: pieter
CC: aran
Maniphest Tasks: T1644
Differential Revision: https://secure.phabricator.com/D3515
Summary: ...also makes Maniphest Task Edit Controller use this when its not appropriate to upsell email.
Test Plan: played around with each tool and verified the Remarkup reference was present
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1756
Differential Revision: https://secure.phabricator.com/D3468
Summary:
People have occasionally complained about phabricator being slow. We have
the access log to look at to see when slowness happens, but it doesn't tell
us much about why it happened. Since it's usually a sporadic issue that's
reported, it's hard to reproduce and then profile. This change will allow us
to collect sampled profiles so we can look at them when slowness occurs.
Test Plan:
checking that sampling works correctly:
- set rate to 0; do several page loads; check no new entries in table
- set rate to 1; check that there's a new row in the table for each page load
- set rate to 10; check that some requests write to table and some don't
check new ui for samples:
- load /xhprof/list/all/, see a list with a lot of samples
- load /xhprof/list/sampled/, see only sampled runs
- load /xhprof/list/manual/, see only non-sampled runs
- load /xhprof/list/my-runs/, se only my manual runs
Reviewers: vrana, epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3458
Summary:
- Renames `PhabricatorPolicyQuery` to `PhabricatorPolicyAwareQuery` (a query which respects policy settings).
- Introduces `PhabricatorPolicyQuery`, which loads available policies (e.g., "member of project X").
- Introduces `PhabricatorPolicy`, which describes a policy.
- Allows projects to be set as policies.
- Allows Paste policies to be edited.
- Covers crazy cases where you make projects depend on themselves or each other because you are a dastardly villan.
Test Plan: Set paste and project policies, including crazy policies like A -> B -> A, A -> A, etc.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D3476
Summary: This is pretty spartan, but it does the job.
Test Plan:
Patch, update storage, add some comment
to your favorite question or answer.
Reviewers: nh, vrana, epriestley
Reviewed By: epriestley
CC: aran, Korvin, starruler, syrneus, me.here, victorzarate7
Maniphest Tasks: T1645
Differential Revision: https://secure.phabricator.com/D3471
Summary: This takes the place of D2721 which I am going to abandon.
Test Plan:
* Make a commit with "Closes T###" in the summary field. See that the mentioned task gets closed.
* Make a commit with "refs T###" in the summary. See that it gets added as a related commit via edges.
Reviewers: 20after4
Reviewed By: epriestley
CC: aran, Korvin, champo
Maniphest Tasks: T945
Differential Revision: https://secure.phabricator.com/D3466
Summary:
- Get rid of an AphrontSideNavView callsite.
- Modernize and simplify the application implementation.
- Doesn't work perfectly on tablet/phone but that's because not all the UI examples work there yet.
Test Plan: Looked at /applications/ and /uiexample/.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D3431
Summary:
I have a chain of revisions sometimes.
I want to see also revisions depending on me.
Test Plan: Displayed revision in the middle of chain.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3399
Summary:
Currently, CelerityController extends AphrontController, not PhabricatorController. (I think I imagined Celerity being somewhat stand-alone and didn't want to create a dependency.)
This creates a concrete problem if a static resource is missing, since we throw an exception, but the higher-level exception handlers depend on the User existing in order to show an appropriate response page. This is the only controller which doesn't extend PhabricatorController, and it doesn't seem worthwhile to make a weird edge case out of it.
Specific repro case is:
- Remove `externals/javelin/` (or forget to run `git submodule update --init`).
- Load a static resource.
- Get "[Rendering Exception] Argument 1 passed to PhabricatorMainMenuView::setUser() must be an instance of PhabricatorUser, null given, called in /services/apache/phabricator/phabricator/src/view/page/PhabricatorStandardPageView.php on line 435 and defined"
Test Plan:
- Followed above steps, no more fataling.
- Verified this is the only weird controller.
Reviewers: voldern, vrana, btrahan
Reviewed By: voldern
CC: aran
Differential Revision: https://secure.phabricator.com/D3389
Summary:
This does a few things:
- Allows you to flag pastes. This is straightforward.
- Allows Applications to register event listeners.
- Makes object action lists emit a 'didrenderactions' event, so other applications can add more actions. The Flags application injects its action in this way. This should generally make it much easier to add actions to objects when we add new applications, with less code duplication and better modularity. We have a really hacky version of this in Differential that I want to get rid of in lieu of this more general approach. I'm going to make object lists do the same thing, so any application can jump in and add stuff.
Test Plan: Flagged and unflagged pastes. Viewed home page, differential, flags list.
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D3377
Summary:
We have this hybrid "create / last few pastes" landing screen right now but I ~never use the list at the bottom and it makes the controller kind of complicated. I want to let you edit pastes too, and this generally simplifies things.
Also makes the textarea monospaced and cleans up the fork logic a bit.
Test Plan: Created, forked pastes. Viewed paste lists. Viewed pastes.
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1690
Differential Revision: https://secure.phabricator.com/D3375
Summary:
Just a bunch of copy-pasta from D2884. I suppose this calls for
a refactoring at some point...
Test Plan:
Make a bunch of updates, some from different users; check
notifications dropdown and list.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3361
Summary: This has been deprecated for quite a while and I'm pretty sure there are no callsites in the wild since this tool doesn't get much use outside of Facebook.
Test Plan: grep
Reviewers: vrana, btrahan, meitros
Reviewed By: vrana
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D3195
Summary:
Adds a flexible navigation menu to diffs that shows you your current position in the diff.
Anticipating some "this is the best thing ever" and some "this is the wosrt thing ever" on this, but let's see how much pushback we get? It seems pretty good to me.
Test Plan: Will attach screenshots.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Maniphest Tasks: T1633, T1591
Differential Revision: https://secure.phabricator.com/D3355
Summary:
Currently, when a user runs "arc diff" and the diff exceeds PHP's 'post_max_size', they get a very confusing and irrelevant error about a missing Conduit session token. The reason for this is that 'post_max_size' doesn't build $_POST, so //all// the data is missing.
We try to detect this, but currently only do so effectively for specific file upload forms. Broaden the detection to cover all cases.
Previously, we ran into an issue where Firefox + HTML5 drag-and-drop uploads would get a false positive on this detection. I dug into this and added the Content-Type checks, which correctly handle that case.
Test Plan: With small and large 'post_max_size', ran small and large normal, HTML5 and multipart/form-data POST requests against Phabricator in Safari and Firefox. Got desired beahviors.
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: tido, aran
Differential Revision: https://secure.phabricator.com/D3320
Summary:
I just put them in the property table instead of a list at the foot, they looked weird down there and were too bulky relative to their importance.
This won't scale great if someone forks a paste ten thousand times or whatever, but we can deal with that when we get there.
Also clean up a few things and tweak some styles,
Test Plan: Looked at forked, unforked pastes.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D3295
Summary:
- Add a PhabricatorApplication.
- Make most of the views work well on tablets / phones. The actual "Create" form doesn't, but everything else is good -- need to make device-friendly form layouts before I can do the form.
Test Plan: Will attach screenshots.
Reviewers: btrahan, chad, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1569
Differential Revision: https://secure.phabricator.com/D3293
Summary:
You can now embed countdowns in Remarkup! Not sure what it's
useful for, but there you have it.
Also I may have made a hash of the markup code; I don't really know what
I'm doing.
Test Plan: Make a new countdown, put `{C###}` in a Differential comment.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1053
Differential Revision: https://secure.phabricator.com/D3290
Summary:
Create `phpast.{version,getast}` methods for calling xhpast
with `--version` and with source code as input, respectively.
Test Plan:
Run `arc call-conduit` a bunch of times; delete xhpast; run
it a bunch more times.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1534
Differential Revision: https://secure.phabricator.com/D3289
Summary:
- Add getHelpURI() to PhabricatorApplication for application user guides.
- Add a new "help" icon menu item and skeletal Diviner application.
- Move help tabs to Applications where they exist, document the other ones that don't exist yet.
- Grep for all tab-related stuff and delete it.
Test Plan: Clicked "help" for some apps. Clicked around randomly in a bunch of other apps.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D3267
Summary: Make it possible to get to stuff that used to be in tabs.
Test Plan: Clicked links and such.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D3264
Summary:
Currently, we have a hard-coded list of settings panels. Make them a bit more modular.
- Allow new settings panels to be defined by third-party code (see {D2340}, for example -- @ptarjan).
- This makes the OAuth stuff more flexible for {T887} / {T1536}.
- Reduce the number of hard-coded URIs in various places.
Test Plan: Viewed / edited every option in every panel. Grepped for all references to these URIs.
Reviewers: btrahan, vrana, ptarjan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D3257
Summary:
We currently have two relatively distinct applications, "People" and "Settings", living in /people/. Move settings to its own directory.
This renames a couple of classes but makes no real code changes.
Test Plan: Browsed /settings/, changed some settings.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1569, T631
Differential Revision: https://secure.phabricator.com/D3256
Summary:
- Add an Application.
- Move routes to the application.
- Move nav out of tabs (which no longer exist).
- Fix a couple of random things.
Test Plan: Viewed sent/received mail logs. Performed send/receive tests. Viewed email details.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T631, T1569
Differential Revision: https://secure.phabricator.com/D3255
Summary:
There's currently no way to get here from the UI since nav tabs don't exist anymore. It's also always been hard to find this feature even when we had the tabs, since it's surprising that it's inside "MetaMTA".
- Move mailing lists to a separate application.
- Add `buildApplicationPage()`, since we don't really need `buildStandardPageResponse()` any more -- we can infer all the information from `PhabricatorApplication`. This will let us get rid of a lot of the `PhabricatorXXXController` classes which just define application information.
- Add `getApplicationURI()` to reduce code duplication, and in case we want to let you move applications around some day.
Test Plan: Looked/edited/saved mailing lists.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T631
Differential Revision: https://secure.phabricator.com/D3248
Summary:
Add a new left-side application menu. This menu shows which application you're in and provides a quick way to get to other applications.
On desktops, menus are always shown but the app menu can be collapsed to be very small.
On tablets, navigation buttons allow you to choose between the menus and the content.
On phones, navigation buttons allow you to choose between the app menu, the local menu, and the content.
This needs some code and UI cleanup, but has no effect yet so I think it's okay to land as-is, I'll clean it up a bit as I start integrating it. I want to play around with it a bit and see if it's good/useful or horrible anyway.
Test Plan: Will include screenshots.
Reviewers: vrana, btrahan, chad
Reviewed By: btrahan
CC: aran, alanh
Maniphest Tasks: T1569
Differential Revision: https://secure.phabricator.com/D3223
Summary:
Ponder is similar in spirit to the Wiki tool, but uses a Q&A
format and up/downvotes to signal user sentiment. Popular
questions are moved to the top of the feed on a 5-minute
cycle based on age (younger is better) and vote count (higher
is better).
Pre-apologies for noob diff.
Test Plan:
- `./bin/phd list` Should include `PonderHeatDaemon`; phd launch it
if necessary.
- Navigate to /ponder/ ; observe sanity when adding questions,
voting on them, and adding answers.
- Confirm that questions and answers are linkable using Q5 / Q5#A5 formatted object links.
- Confirm that searching for Ponder Questions works using built-in
search.
Feedback on code / schema / whatever organization very welcome.
Reviewers: nh, vrana, epriestley
Reviewed By: epriestley
CC: gmarcotte, aran, Korvin, starruler
Differential Revision: https://secure.phabricator.com/D3136
Summary: rather than showing an erroneous "we still parsing" message.
Test Plan: for each version control system, typed in a garbage URL and got a 4oh4. (note this actually fails for SVN -- see comment about how my code fails atm -- and DiffusionGitRequest seems to pick off this error in advance and returns an AphrontUsageException.)
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1624
Differential Revision: https://secure.phabricator.com/D3201
Summary: We managed to move enough Owners stuff aside to make this reasonable; make projects implement the policy interface and projectquery use cursor-based paging.
Test Plan:
- Grepped for ProjectQuery callsites.
- Created an audit comment.
- Used `project.query` to query projects.
- Loaded homepage.
- Viewed Maniphest task list, grouped by project.
- Viewed project list.
- Created / edited project.
- Browsed Owners.
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D3200
Summary:
This is a step toward unearthing Project queries enough that I can make them policy-aware. Right now, some ProjectQuery callsites do not have reasonable access to the viewer. In particular, Owners packages need to issue Project queries because we allow projects to own packages and resolve project members inside of some package queries.
Currently, we have a very unmodern approach to querying packages, with a large number of one-off static load methods:
PhabricatorOwnersPackage::loadAffectedPackages()
PhabricatorOwnersPackage::loadOwningPackages()
PhabricatorOwnersPackage::loadPackagesForPaths()
PhabricatorOwnersOwner::loadAllForPackages()
PhabricatorOwnersOwner::loadAffiliatedUserPHIDs()
PhabricatorOwnersOwner::loadAffiliatedPackages()
ConduitAPI_owners_query_Method::queryAll()
ConduitAPI_owners_query_Method::queryByOwner()
ConduitAPI_owners_query_Method::queryByAffiliatedUser()
ConduitAPI_owners_query_Method::queryByPath()
We should replace `PhabricatorOwnersOwner` with an Edge and move all of these calls to a Query class. I'm going to try to do as little of this work as I can for now since I'm much more interested in getting a functional policy implementation into other applications, but ProjectQuery needs to be policy-aware before I can do that and I need to dig some at least some of the callsites out enough that I can get a viewer in there without making the code worse than it is.
This adds a PhabricatorOwnersPackageQuery class and removes one callsite of one of those static methods.
I also intend to dissolve the two separate concepts of an "owner" (direct owner) and an "affiliated user" (indirect owner via project membership) since I think we're always fine with "affiliated users" owners.
Test Plan: Loaded home page / audit tool, which use the modified path. Ran queries manually via script. Made sure results included directly owned packages and packages owned through project membership.
Reviewers: vrana, btrahan, meitros
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D3193
Summary:
- Commit detail view
- List of projects
- "edit" action which takes the user to a simple form where they can only add / remove projects.
- Integrated the project relationship into the commit search indexer
- fixed a bug from D790; it seems you must select the column if you're going to join against it later. Without this change searching for author or projectfails 100% for me.
Test Plan: added and removed projects. verified appropriate projects showed up in detail and edit view. searched for commits by project and found the ones I was supposed to...!
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1614
Differential Revision: https://secure.phabricator.com/D3189
Summary:
- Store project members in edges.
- Migrate existing members to edge storage.
- Delete PhabricatorProjectAffiliation.
- I left the actual underlying data around just in case something goes wrong; we can delete it evenutally.
Test Plan:
- Ran migration.
- Created a new project.
- Joined and left a project.
- Added and removed project members.
- Manually called PhabricatorOwnersOwner::loadAffiliatedUserPHIDs() to verify its behavior.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D3186
Summary:
These are currently useless and confusing (they have no application impact), and should be migrated to edges if we want to restore them in some form.
I left the actual storage so this doesn't destroy any data, it just removes all traces of this feature from the UI.
Test Plan: Looked at and edited projects.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D3183
Summary:
I'm trying to make progress on the policy/visibility stuff since it's a blocker for Wikimedia.
First, I want to improve Projects so they can serve as policy groups (e.g., an object can have a visibility policy like "Visible to: members of project 'security'"). However, doing this without breaking anything or snowballing into a bigger change is a bit awkward because Projects are name-ordered and we have a Conduit API which does offset paging. Rather than breaking or rewriting this stuff, I want to just continue offset paging them for now.
So I'm going to make PhabricatorPolicyQuery extend PhabricatorOffsetPagedQuery, but can't currently since the `executeWithPager` methods would clash. These methods do different things anyway and are probably better with different names.
This also generally improves the names of these classes, since cursors are not necessarily IDs (in the feed case, they're "chronlogicalKeys", for example). I did leave some of the interals as "ID" since calling them "Cursor"s (e.g., `setAfterCursor()`) seemed a little wrong -- it should maybe be `setAfterCursorPosition()`. These APIs have very limited use and can easily be made more consistent later.
Test Plan: Browsed around various affected tools; any issues here should throw/fail in a loud/obvious way.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D3177
Summary:
This makes no changes, it just moves the menu icons to the applications instead of hard-coded on the page.
I'm going to try to address some of the angst in T1593 next...
Test Plan: Loaded logged-in / logged out pages. Clicked menu items. Looked at /applications/.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Maniphest Tasks: T1593, T1569
Differential Revision: https://secure.phabricator.com/D3146
Summary:
- Put the code to generate informational dicts about flags into the
base class.
- Update flag.delete to accept an object PHID in order to delete the
flag on that object, since currently the model is that each object
may have at most one flag, and each flag has exactly one object,
although the former is not enforced.
- Add flag.edit, which creates or updates a flag, optionally with the
given color and note.
Test Plan:
Spend endless hours repeatedly running arc call-conduit and
arc flag.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3141
Summary:
- Adds a new "Applications" application.
- Builds an application list via application config instead of via hard-coding, so we can move toward better concepts of installing/uninstalling applications, etc.
- Applications indicate that they need attention with notice counts and brief status messages rathern than 50 giant tables of all sorts of app data.
I want to try replacing the home screen with this screen, pretty much. Not sure if this is totally crazy or not. What does everyone else think?
Test Plan: Will add screenshots.
Reviewers: btrahan, chad, vrana, alanh
Reviewed By: vrana
CC: aran, davidreuss, champo
Maniphest Tasks: T1569
Differential Revision: https://secure.phabricator.com/D3129
Summary:
To make it easier to monitor daemons, let's store their current state
(running, died, exited, or unknown) to the db. The purpose of this is to
provide more information on the daemon console about the status of daemons,
especially when they are running on multiple machines. This is mostly backend
work, with only a few frontend changes. (It is also dependent on a change
to libphutil.)
These changes will make dead or stuck daemons more obvious, and will allow
more work on the frontend to hide daemons (and logs) that have exited cleanly,
i.e. ones we don't care about any more.
Test Plan:
- run db migration, check in db that all daemons were marked as exited
- start up a daemon, check in db that it is marked as running
- open web interface, check that daemon is listed as running
- after daemon has been running for a little bit, check in db that dateModified
is being updated (indicating daemon is properly sending heartbeat)
- kill -9 daemon (but don't run bin/phd yet), and check that db still shows it
as running
- edit daemon db entry to show it as being on a different host, and backdate
dateModified field by 3 minutes, and check the web ui to show that the status
is unknown.
- change db entry to have proper host, check in web ui that daemon status is
displayed as dead. Check db to see that the status was saved.
- run bin/phd stop, and see that the formerly dead daemon is now exited.
Reviewers: epriestley, vrana
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3126
Summary:
- Include symbols in main typeahead results.
- Simplify the symbol query a bit and extend PhabricatorOffsetPagedQuery. There was some stuff around language ranking that I got rid of, I think the theory there was that mapping file extensions to languages might not work in general but I think it works fine in practice, and we have more config stuff now around guessing languages and getting the mappings right.
- Make it easier to debug the typeahead by showing the results in page format for non-ajax requests.
- When we have too many results, show only the top few of each type.
Depends on D3116, D3117
Test Plan: Used typeahead, got symbols in results. Hit endpoint with non-ajax, got useful debug view.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1569
Differential Revision: https://secure.phabricator.com/D3118
Summary:
Each query takes over 2 seconds in FBCODE.
I didn't find a way how to speed them up.
There's also no easy way how to parallelize them at least.
So AJAX is the last instance.
Test Plan: Loaded commit with one branch and no tag.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3112
