Summary: Add some more translations to make the interface very wow (Thanks to Robert Calaceto)
Test Plan: Squinted my eyes and stared at the UI until stuff made sense.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, chad, epriestley
Differential Revision: https://secure.phabricator.com/D12312
Summary: Ref T5501. This expands cache information a little more.
Test Plan: {F362975}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5501
Differential Revision: https://secure.phabricator.com/D12316
Summary:
Ref T5501. This code was headed down a bad road; dump an indirection layer between rendering and data gatehring.
In particular, this will make it much easier to lift these issues into setup warnings eventually.
Test Plan: Viewed cache status page.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5501
Differential Revision: https://secure.phabricator.com/D12315
Summary:
Ref T5501. This is just getting version detection and availability right, probably.
Eventually, this will get lifted up a bit and "$remedy" will turn into setup issues (or maybe one setup issue saying "your cache setup is messed up, click here to understand why").
Test Plan:
{F362935}
I intend to shove these up to production one-by-one since production is APC and local is Opcache + APCu.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5501
Differential Revision: https://secure.phabricator.com/D12314
Summary: This is the new search UI as seen in Pholio. Unrounds it (mostly, and makes the eyeglass more button like.
Test Plan:
Review in all header colors, check photoshop for pixel layout consistency. Review in FF, Chrome, Safari, IE. Make sure I didn't mess up mobile.
{F359366}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D12277
Summary: This reverts commit 55c00ebfa1. T7111, T7112 and T7113 have all been resolved now.
Test Plan: Maybe wait a few more weeks... I just wanted to ensure that this wasn't forgotten.
Reviewers: btrahan, #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11910
Summary: I think D11212 missed the feed variants. add 'em.
Test Plan: hope and pray and push to prod and see
Reviewers: joshuaspence, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D12309
Summary:
Fixes T7255.
Note however that some datasources - notably user or project - don't implement the class thing in a clean way since multiple classes apply. For now, we just show these datasources to the user.
Also, I guess this could be done more efficiently by querying for all the applications at once via an application query? LMK if you want me to make that change.
Test Plan: loaded /typeahead/class/ and played with it a bit with no issues
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7255
Differential Revision: https://secure.phabricator.com/D12307
Summary: Fixes T7486. Implement HTTP response messages such as `200 OK` and `404 Not Found`. The status codes were taken from http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html.
Test Plan: Navigated to `/foo` and saw the response showing `404 Not Found` in the Network tab of Chrome.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7486
Differential Revision: https://secure.phabricator.com/D12299
Summary: Ref T6875. #chatlog is deprecated and will eventually be merged into #conpherence.
Test Plan: N/A
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: cburroughs, epriestley
Maniphest Tasks: T6875
Differential Revision: https://secure.phabricator.com/D12097
Summary: Fixes T7502.
Test Plan: Went to `/diviner/` and saw a link to the documentation at `/help/documentation/PhabricatorDivinerApplication/`.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7502
Differential Revision: https://secure.phabricator.com/D12094
Summary: Fixes T7693.
Test Plan: made a conpherence with my main test account and a throwaway test account. deleted the test account. removed myself from the thread. added myself back to the thread.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7693
Differential Revision: https://secure.phabricator.com/D12306
Summary:
Fixes T7731. When a user writes a "Send me an email" rule, always try send them an email, even if their notification settings would normally downgrade it to a notification.
In particular, this is stronger than these downgrades:
- Downgrades due to "self actions";
- downgrades due to "mail tags".
Test Plan:
- Wrote various Herald rules with "Send me an email" rules.
- Used `bin/mail list-outbound` / `show-outbound` to vet generated mail.
- Mail reacted properly to a variety of conditions (disabled accounts, settings, "send me an email" rule, forced delivery).
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7731
Differential Revision: https://secure.phabricator.com/D12300
Summary:
Ref T7731. Looking forward to T5791, I eventually anticipate writing an interface which looks like a webmail UI where users can review mail they've been sent and understand why they recieved (or did not receive) the mail. Roughly like `bin/mail list-outbound` / `bin/mail show-outbound` work today, but policy-aware (so you can only see messages where delivery was attempted to you).
We currently record a list of "reasons" why a mail is undeliverable, but this list is string-based (so it can not be translated once we start persisting it) and has only negative reasons (so it can not be used to fully understand reasons for delivery or nondelivery).
Make it code-based (so it can be translated) and allow both positive and negative reasons to be listed (so positive reasons can be understood).
Test Plan: Used `bin/mail show-outbound` to review mail delivery reasons, including the positive reason we currently have (forced delivery of authentication mail).
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7731
Differential Revision: https://secure.phabricator.com/D12297
Summary:
Ref T7731. For no particular reason, we currently put `ruleID` and `rulePHID` on `HeraldEffect` objects.
Pretty much all callers need the `HeraldRule` objects instead, and some go to great lengths to get them.
Just attach the `Rule` objects.
Test Plan: Will test thoroughly after next-ish changeset.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7731
Differential Revision: https://secure.phabricator.com/D12269
Summary:
Ref T7731. Every adapter subclass currently implements this effect in an essentially identical way.
Some day far from now the effects will be modular and this mess will vanish completely, but reduce its sprawl for now.
Test Plan: I'll test this thoroughly at the end of the change sequence since writing rules is a pain.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7731
Differential Revision: https://secure.phabricator.com/D12268
Summary:
Ref T7731.
- This does nothing.
- I don't know what this was supposed to do.
- It didn't do anything when it was introduced in rP084c79d85a in 2011, either.
iiam
Test Plan:
- `grep`
- ???
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7731
Differential Revision: https://secure.phabricator.com/D12267
Summary: Fixes T7765. The existing sort was based on when people were added to the conpherence and basically feels random in time. Instead, sort current logged in user to the top and make the rest of the list alphabetical.
Test Plan:
viewed a conpherenece and noted my logged in user at top and the rest was sorted alphabetically
viewed a room that i was not a participant in and participant list rendered correctly
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7765
Differential Revision: https://secure.phabricator.com/D12302
Summary: Fixes T7764. These settings have low utility, are no longer used by default, have become less useful on modern Windows which has a better selection of available fonts, and will eventually be subsumed (at least, for the most part) by T4103.
Test Plan:
- Grepped for strings.
- Viewed settings.
- Changed font to "24px impact".
- Viewed diffs with default and custom font.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: chad, epriestley
Maniphest Tasks: T7764
Differential Revision: https://secure.phabricator.com/D12301
Summary: In its current form, this file is not being linted. This doesn't seem to be intentional.
Test Plan: Introduced a linter error and ran `arc lint`.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D12282
Summary: These arrays looks a little odd, most likely due to the autofix applied by `ArcanistXHPASTLinter::LINT_ARRAY_SEPARATOR`. See D12296 in which I attempt to improve the autocorrection from this linter rule.
Test Plan: N/A
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D12281
Summary: Fixes T7582. Basically if its a room we should be able to change title + policy and if its a thread just the title. T7582 had ideas to do a dropdown but "view in column" doesn't make sense from conpherence afaik - what would the page you'd end up with the column be? (maybe home?) Anyway, that is iteration we can add laters
Test Plan: edited room metadata successfully from main and column view. edtied thread title from main and column view.
Reviewers: epriestley, chad
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7582
Differential Revision: https://secure.phabricator.com/D12252
Summary:
Fixes T7484. There's a bunch of spooky mystery here but the current behavior can probably cause problems in at least some situations.
Also moves a couple callsigns to monograms (see T4245).
Test Plan:
- Faked a short lock length to hit the exception.
- Updated normally.
- Grepped for other use sites, none seemed suspicious or likely to overflow the lock length.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7484
Differential Revision: https://secure.phabricator.com/D12263
Summary:
Ref T7689. Fixes T7688. When there are a bunch of tokenizers with different values of the same object type (e.g. 5 tokenizers with users a, b, c, d, e) we currently issue 5 separate queries to load their handles.
Improve this behavior in the common case so we can usually batch these loads.
Test Plan:
- In Maniphest, set the various search fields to different values.
- Used DarkConsole to examine query plan.
- Saw fewer queries after patch than before.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7688, T7689
Differential Revision: https://secure.phabricator.com/D12261
Summary:
Fixes T7712. Currently, files sent via email get default policies, like they were dragged and dropped onto the home page.
User expectation is better aligned with giving files more restrictive policies, like they were draggged and dropped directly onto an object.
Make files sent via email have restricted default visibility. Once we identify the sender, set them as the file author. Later, the file will become visible to other users via attachment to a task, revision, etc.
Test Plan: Sent some files via email; verified they got restrictive policies, correct authorship, and appropriate object attachment.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7712
Differential Revision: https://secure.phabricator.com/D12255
Summary:
See IRC. We don't always reach `loadPage()`, particularly if `canViewerUseQueryApplication()` fails.
Perform initialization steps in `willExecute()` instead.
Trace from IRC:
```
2015/04/02 11:48:32 [error] 26979#0: *48012 FastCGI sent in stderr: "PHP message: [2015-04-02 11:48:32] EXCEPTION: (Exception) You must execute() the query before accessing the identifier map. at [<phabricator>/src/applications/repository/query/PhabricatorRepositoryQuery.php:134]
PHP message: #0 PhabricatorRepositoryQuery::getIdentifierMap() called at [<phabricator>/src/applications/diffusion/remarkup/DiffusionRepositoryRemarkupRule.php:26]
PHP message: #1 DiffusionRepositoryRemarkupRule::loadObjects(array) called at [<phabricator>/src/infrastructure/markup/rule/PhabricatorObjectRemarkupRule.php:309]
PHP message: #2 PhabricatorObjectRemarkupRule::didMarkupText() called at [<phutil>/src/markup/engine/PhutilRemarkupEngine.php:292]
PHP message: #3 PhutilRemarkupEngine::postprocessText(array) called at [<phabricator>/src/infrastructure/markup/PhabricatorMarkupEngine.php:138]
PHP message: #4 PhabricatorMarkupEngine::process() called at [<phabricator>/src/infrastructure/markup/PhabricatorMarkupEngine.php:71]
PHP message: #5 PhabricatorMarkupEngine::renderOneObject(PhabricatorMarkupOneOff, string, PhabricatorUser) called at [<phabricator>/src/infrastructure/customfield/standard/PhabricatorStandardCustomFieldRemarkup.php:47]
PHP message: #6 PhabricatorStandardCustomFieldRemarkup::renderPropertyViewValue(array) called at [<phabricator>/src/infrastructure/customfield/field/PhabricatorCustomField.php:1191]
PHP message: #7 PhabricatorCustomField::renderPropertyViewValue(array) called at [<phabricator>/src/infrastructure/customfield/field/PhabricatorCustomFieldList.php:176]
PHP message: #8 PhabricatorCustomFieldList::appendFieldsToPropertyList(PhabricatorProject, PhabricatorUser, PHUIPropertyListView) called at [<phabricator>/src/applications/project/controller/PhabricatorProjectProfileController.php:220]
PHP message: #9 PhabricatorProjectProfileController::buildPropertyListView(PhabricatorProject, PhabricatorActionListView) called at [<phabricator>/src/applications/project/controller/PhabricatorProjectPr
```
Test Plan:
- Used `rX` in remarkup.
- Used `rX` in search.
- Browed Diffusion, etc.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D12264
Summary: Fixes T7720. We currently leak the "draft" state of checkboxes; never treat checkboxes as drafts if you can't mark them.
Test Plan: Checked a box, reloaded page in other browser. Previously, the draft state partially propagated. Now, it no longer does.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T7720
Differential Revision: https://secure.phabricator.com/D12262
Summary: Fixes T7730. Herald queries used to incorrectly label object rules as global rules. An object rule is now labeled as such.
Test Plan: Made a few rules and looked at the herald query page.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Maniphest Tasks: T7730
Differential Revision: https://secure.phabricator.com/D12259
Summary: Fixes T7484. If the lock failed, we'd still try to unlock it, which is incorrect.
Test Plan: Ran two `bin/repository update X` in different windows, got proper LockException instead of indirect symptomatic "not locked by this process" exception.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7484
Differential Revision: https://secure.phabricator.com/D12253
Summary: Added Submit translation for Very Wow Locale
Test Plan: Look at the code and hope it works
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D12254
Summary: This shrinks the UI to fit more people in the participants list, useful for rooms. Also update the remove icon.
Test Plan:
Review a lot of people in a room, so so many.
{F354233}
Reviewers: epriestley, btrahan
Reviewed By: btrahan
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D12213
Summary:
Fixes T7584. Adds the ability to specify rooms, messages, or both. Adds policy icon to rooms result view and envelope icon to messages result view. Fixes a missing group by clause in thread query. Enforces having participant phid if the query isn't looking at rooms and doesn't have other particpant phids.
This last bit has a small UI quirk if the user searches for "messages" or "both" with no participant phids as we don't give them the feedback that they were included in the query. We could just slap the viewer in the particpants list in this case but it seemed like a buggier feeling experience to have the viewer appear up there? (Especially so in messages case, where we are basically being smart about policy filtering to come.)
Test Plan: clicked around and got sensible results
Reviewers: chad, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7584
Differential Revision: https://secure.phabricator.com/D12232
Summary:
Minor things
- Use radiused avatars like timeline
- Fix edge case with conpherence edited and date markers
Test Plan: Review a number of odd states in Conpherence full.
Reviewers: epriestley, btrahan
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D12251
Summary:
Ref T7689. We may not propgate the viewer down to the controls in some rendering pathways. An example is "Create Task..." on workboard columns.
Instead, move the propagation a little deeper.
Test Plan: "Create Task..." on a workboard column.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7689
Differential Revision: https://secure.phabricator.com/D12250
Summary:
Fixes T7199. This still isn't a shining example of perfect code, but the raw amount of copy/paste is much lower than it used to be.
- Reduce code duplication between existing receivers.
- Expose receiving objects in help menus where appropriate.
- Connect some "TODO" receivers.
Test Plan:
- Sent mail to every supported object type.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7199
Differential Revision: https://secure.phabricator.com/D12249
Summary: Ref T7199. Implements `!projects` for all objects which implement `PhabricatorProjectInterface`.
Test Plan: Added projects to a task via email.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7199
Differential Revision: https://secure.phabricator.com/D12246
Summary: Ref T7199. This makes the page look less janky and provides more context about how mail commands work and how to use them.
Test Plan: {F355959}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7199
Differential Revision: https://secure.phabricator.com/D12245
Summary:
Ref T7199. Convert the single help menu item into a dropdown and allow applications to list multiple items there.
When an application has mail command objects, link them in the menu.
Test Plan:
{F355925}
{F355926}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7199
Differential Revision: https://secure.phabricator.com/D12244
Summary: Ref T7199. This needs some polish and isn't reachable from the UI, but technically has all of the information.
Test Plan:
{F355899}
{F355900}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7199
Differential Revision: https://secure.phabricator.com/D12241
Summary:
Ref T7199. This fully modularizes mail command handling in Maniphest.
I had to add a couple of minor not-totally-solid-feeling tricks to deal with the "create" case, but they feel not-too-bad, and a million times better than what came before.
Test Plan: Used all commands with `receive-test`.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7199
Differential Revision: https://secure.phabricator.com/D12240
Summary: Ref T7199. Convert Differential to modern modular commands.
Test Plan: Used `bin/mail receive-test` to send command and comment mail to Differential.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7199
Differential Revision: https://secure.phabricator.com/D12239
Summary: Ref T7199. Everyone can have a mail command! You can have a mail command! You can have a mail command! Mail commands for everyone!
Test Plan: Used `bin/mail receive-test` to issue commands against files and pastes.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7199
Differential Revision: https://secure.phabricator.com/D12238
Summary: Ref T7199. Half of these aren't even reachable, but make some progress toward reducing the amount of nonsense and garbage in mail handling.
Test Plan: Tested all reachable handlers with `bin/mail receive-test`.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7199
Differential Revision: https://secure.phabricator.com/D12237
Summary:
Ref T7199. Essentially all of the reply handlers now apply transactions to something which implements PhabricatorApplicationTransactionInterface.
We can share code between them by lifting this stuff into a superclass.
First, convert paste. Also rename `PasteMockMailReceiver` to `PasteMailReceiver` (this got mis-copied from Pholio at some point, I think).
Test Plan: Used `bin/mail receive-test` to send comments + `!unsubscribe` to pastes.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7199
Differential Revision: https://secure.phabricator.com/D12236
Summary:
Ref T7199. Ref T7712. This improves the file rules for email:
- Embed visible images as thumbnails.
- Put all other file types in a nice list.
This "fixes" an issue caused by the opposite of the problem described in T7712 -- files being dropped if the default ruleset is too restrictive. T7712 is the real solution here, but use a half-measure for now.
Test Plan:
- Sent mail with two non-images and two images.
- Got a nice list of non-images and embeds of images.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7712, T7199
Differential Revision: https://secure.phabricator.com/D12235
Summary: Fixes T7721. Looks like this got renamed at some point but skipped. Also, change the true / false idx look ups to correct integers here since there's a warning in the error logs in this case without it.
Test Plan: made new user. loaded up conpherence and it worked. tried all the links too for good measure and they worked
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7717, T7721
Differential Revision: https://secure.phabricator.com/D12243
Summary:
Ref T7199. Two notable changes:
- Process multiple commands.
- Process commands when creating //or// updating a task.
And generally clean things up a bit.
Test Plan:
- Used `receive-test` to execute all commands for new tasks.
- Used `receive-test` to execute all commands for existing tasks.
- Used a combination of commands to produce varied effects.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7199
Differential Revision: https://secure.phabricator.com/D12234
Summary:
Ref T7199. In the vein of D12231, these options were a bad idea.
- They once served a very narrow, Facebook-specific need (see T1992), except even Facebook only used the Differential setting AFAIK.
- Outside of that special case, they are unused and essentially unusable (generally speaking, they do not meaningfully implement anything modular or replaceable).
- I have no knowledge of any install ever changing these settings, and can imagine no reason why they would.
Moving forward:
- If they really need to, they can fork locally and chagne one line.
- I expect "!actions" to make mail at least somewhat more modular soon, anyway.
- Any derived handlers would break after T7199 and need to be rewritten anyway, so this is just taking advantage of a BC break to do cleanup.
Test Plan:
- Grepped for removed configuration.
- Sent some mail from applications, verified the reply handlers set proper reply addresses.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7199
Differential Revision: https://secure.phabricator.com/D12233
Summary:
Ref T7199. These were a bad idea which got copy-pasted a bunch.
- There is zero reason to ever set these to different things.
- Unsurprisingly, I don't know of any install which has them set to different things.
Unless I've completely forgotten about it, this option was not motivated by some obscure business need, it was just a bad decision which didn't catch anyone's attention at the time.
We partially remedied the mistake at some point by introducing `metamta.reply-handler-domain`, which works as a default for all applications, but never cleaned this mess up.
Test Plan: Sent some mail from applications, verified it picked up appropraite reply handler domains.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7199
Differential Revision: https://secure.phabricator.com/D12231
Summary:
Ref T7199. This prepares for an exciting new world of more powerful "!action" commands. In particular:
- We parse multiple commands per mail.
- We parse command arguments (these are currently not used).
- We parse commands at the beginning or end of mail.
Additionally:
- Do a quick modernization pass on all handlers.
- Break legacy compatibility with really hacky Facebook stuff (see T1992). They've theoretically been on notice for a year and a half, and their setup relies on calling very old reply handler APIs directly.
- Some of these handlers had some copy/paste fluff.
- The Releeph handler is unreachable, but fix it //in theory//.
Test Plan:
- Sent mail to a file; used "!unsubscribe".
- Sent mail to a legalpad document; used "!unsubscribe".
- Sent mail to a task; used various "!close", "!claim", "!assign", etc.
- Sent mail to a paste.
- Sent mail to a revision; used various "!reject", "!claim", etc.
- Tried to send mail to a pull request but it's not actually reachable.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7199
Differential Revision: https://secure.phabricator.com/D12230
Summary:
Ref T7199. Although this is useful for discovery, it's un-useful enough that we already have an option to disable it, and most applications do not provide any meaningful instructions.
Throwing it away makes it easier to move forward and lets us get rid of a config option.
This is becoming a more advanced/power-user feature anyway, and the new syntax will be significantly more complex and hard to explain with a one-liner. I'm currently thinking that I'll maybe make the "help" menu a dropdown and give it some options like:
+---+
| O |
+---+---------------------+
| Maniphest Documentation |
| Maniphest Email Actions |
+-------------------------+
Then you click the "Email Actions" thing and get a runtime-derived list of available options. Not sure if I'll actually build that, but I think we can fairly throw the in-mail instructions away even if we don't go in that specific direction.
Test Plan: Grepped for `replyHandlerInstructions`, got no hits.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7199
Differential Revision: https://secure.phabricator.com/D12229
Summary: Ref T7199. Guess no one has ever tried to reply to file mail.
Test Plan: Used `bin/mail receive-test` to send mail to files.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7199
Differential Revision: https://secure.phabricator.com/D12228
Summary: if users have no conpherences I think this is possible? just init it with the rest of the variables we init when we have no conpherence and we should be good to go. fixes T7671.
Test Plan: logicypoo
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7671
Differential Revision: https://secure.phabricator.com/D12227
Summary: Ref T7689. Ref T4100. This advances the goals of removing `loadViewerHandles()` (only 67 callsites remain!) and letting tokenizers some day take token functions like `viewer()` and `members(differential)`.
Test Plan:
- Sent a new message; used "To".
- I simplified the cancel URI construction slightly because it's moot in all normal cases.
- Edited a thread; used "Add Participants".
- Searched rooms; used "Participants".
- Searched countdowns; used "Authors".
- Created a diff; used "Repository".
- Edited a revision; edited "Projects"; edited "Reveiwers"; edited "Subscribers".
- Searched for revisions; edited "responsible users"; "authors"; "reviwers"; "subscribers"; "repositories".
- Added revision comments; edited "Add Reveiwers"; "Add Subscribers".
- Commented on a commit; edited "Add Auditors"; "Add subscribers".
- Edited a commit; edited "Projects".
- Edited a repository; edited "Projects".
- Searched feed, used "include Users"; "include Proejcts".
- Searched files, used "authors".
- Edited initiative; edited "Projects".
- Searched backers; used "Backers".
- Searched initiatives; used "Owners".
- Edited build plans; edited "Run Command".
- Searched Herald; used "Authors".
- Added signature exemption in Legalpad.
- Searhced legalpad; used "creators"; used "contributors".
- Searched signatures; used "documents"; used "signers".
- Created meme.
- Searched macros; used "Authors".
- Used "Projects" in Maniphest reports.
- Used Maniphest comment actions.
- Edited Maniphest tasks; edited "Assigned To"; edited "CC"; edited "projects".
- Used "parent" in Maniphest task creation workflow.
- Searched for projects; used "assigned to"; "in any projec"; "in all projects"; "not in projects"; "in users' projects"; "authors"; "subscribers".
- Edited Maniphest bug filing domains, used "Default Author".
- Searched for OAuth applications, used "Creators".
- Edited Owners pacakge; edited "Primary Owner"; edited "Owners".
- Searched for Owners packages; used "Owner".
- OMG this UI is OLD
- Edited a paste; edited "Projects".
- Searched for paste; used "Authors".
- Searched user activity log; used "Actors"; used "Users".
- Edited a mock; edited "Projects"; edited "CC".
- Searched for mocks; used "Authors".
- Edited Phortune account; edited "Members".
- Edited Phortune merchant account; edited "Members".
- Searched Phrequent; used "Users".
- Edited Ponder question; sued "projects".
- Searched Ponder; used "Authors"; used "Answered By".
- Added project members.
- Searched for projects; used "Members".
- Edited a Releeph product; edited "Pushers".
- Searched pull requests; searched "Requestors".
- Edited an arcanist project; used "Uses Symbols From".
- Searhced push logs; used "Repositories"; used "Pushers".
- Searched repositories; used "In nay project".
- Used global search; used Authors/owners/Subscribers/In Any Project.
- Edited a slowvote; used "Projects".
- Searched slovotes; used "Authors".
- Created a custom "Users" field; edited and searched for it.
- Made a whole lot of typos in this list. ^^^^^^
Did not test:
- Lint is nontrivial to test locally, I'll test it in production.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4100, T7689
Differential Revision: https://secure.phabricator.com/D12224
Summary:
Ref T7689. This serves two goals:
- I want to remove Controller->loadViewerHandles(). A nontrivial number of these callsites are loading handles to pass to tokenizers. Since tokenizers need to take strings eventually anyway, we can do less work by letting them take PHIDs now.
- A few changes out, I want tokenizers to accept parameterized tokens (like `viewer()`, `members(differential)`, etc.), so the `setValues()` signature needs to change eventually anyway.
I made this work and converted a handful of callsites as an example; upcoming changes will convert more.
Test Plan:
- Viewed Almanac binding editor; used "Interface".
- Edited Almanac services; used "Projects".
- Edited Almanac devices; used "Projects".
- Searched for commits; used "Auditors"; "Commit Authors", "Repositories".
- Searched for calendar events; used "Created By"; used "Invited".
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7689
Differential Revision: https://secure.phabricator.com/D12218
Summary: D12222 did an evil thing. This correctly scopes this to just the threads you are participating in and not all threads which then get filtered from policy later, super slowly...
Test Plan: still 'works' and probably wont kill prod
Reviewers: chad, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D12223
Summary:
Ref T7566. Prior to this diff, we had a broken mess in the "Messages" section. Now, "Messages" behave like rooms in that whatever is loaded at page load time is at the top of the list.
Additionally, refine "show more" behavior such that it simply shows the next X, but if there exists X + 1 then we have another "show more" that kicks you to application search. Theoretically, there are still corner cases where users are in a ton of rooms or a ton of messages respectively, but this feels pretty good.
Consolidates title rendering code so we always render the list of participants and no more "No Title".
Also remove the policy icons for messages consistently, helping to differentiate them from rooms at a glance.
Test Plan: clicked around in conpherence main - looked good. tried "show more" and it worked! played around in durable column and things seemed reasonable there too.
Reviewers: chad, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7566
Differential Revision: https://secure.phabricator.com/D12222
Summary: Previously, this text was transparent, moved it to a new span and set visibility on it.
Test Plan: review search in FF, Chrome. Text no longer displays.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7710
Differential Revision: https://secure.phabricator.com/D12219
Summary:
Ref T7689. This gives HandleLists `renderList()` and `renderHandle()` methods, which return views that can perform just-in-time data fetching and generally look and feel like other rendering code, instead of being odd pseudo-functional methods on `Controller`.
Also converts callsites on the Maniphest detail page to use these methods.
Next changes will wipe out more of the callsites.
Test Plan:
- Viewed Maniphest detail page with many relevant handles.
- Created a new subtask.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7689
Differential Revision: https://secure.phabricator.com/D12205
Summary:
Ref T7689, which discusses some of the motivation here. Briefly, these methods are awkward:
- Controller->loadHandles()
- Controller->loadViewerHandles()
- Controller->renderHandlesForPHIDs()
This moves us toward better semantics, less awkwardness, and a more reasonable attack on T7688 which won't double-fetch a bunch of data.
Test Plan:
- Added unit tests.
- Converted one controller to the new stuff.
- Viewed countdown lists, saw handles render.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7689
Differential Revision: https://secure.phabricator.com/D12202
Summary: pebkac issue of some sort and I didn't actually commit removing the defunct /conpherence/room/ uri route
Test Plan: made a new room and it worked
Reviewers: chad, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D12216
Summary: Ref T7584. In Conpherence main view, this adds a "search" link right in the "Rooms" header. This piece addresses an outstanding item on T7584. This diff also adds a search button in the durable column that takes you to the application search. This kind of a big product bet that rooms are going to be dominating things and its most useful to find another room quickly from this view. That said, I think the application search should get massaged slightly to allow searching threads and this won't be much of a trade off at all.
Test Plan: verified new search links took me to correct place and displayed reasonably.
Reviewers: chad, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7584
Differential Revision: https://secure.phabricator.com/D12215
Summary: Ref T7061. Quicksand still needs an ajax-style response here.
Test Plan: Clicked a file detail page (this redirects) with column open, ended up in the right place.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7061
Differential Revision: https://secure.phabricator.com/D12206
Summary: Swaps out search icon for font-awesome. Tweaks colors a bit for different color headers.
Test Plan: Test a number of colors in the search box. Click on button and still go to advanced search.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D12200
Summary:
Fixes T7061. Although it's very simple, I think this is a complete fix.
Quicksand technically is Ajax and uses Workflow as a transport mechanism, but the server should always pretend the user clicked a normal link when rendering.
Test Plan: Links that were autoconverting into dialogs (like "Edit Task") or otherwise making the wrong behavioral choices now work as expected.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T7061
Differential Revision: https://secure.phabricator.com/D12194
Summary:
Fixes T7063. Fixes T7059. We were running some extra unnecessary behaviors. In particular, we would render the menu but not actually send it over the wire, so some behaviors would execute, fail to find the nodes they expected, and throw. This cascaded into some other failures.
Do less work and don't activate behaviors which won't be able to run.
Test Plan: Clicked around, no more errors on page transition. Comment previews work.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T7059, T7063
Differential Revision: https://secure.phabricator.com/D12188
Summary:
Ref T1460. Overall:
- Pass `objectOwnerPHID` consistently.
- Pass viewer consistently.
- Set the correct draft state for checkboxes on the client.
Test Plan:
- Made inline comments in Differential.
- Made inline comments in Diffusion.
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T1460
Differential Revision: https://secure.phabricator.com/D12186
Summary:
Rebuilds the UI in Differential commenting. Specifically we look at the following design patterns:
**To the author:**
- The author of the diff should be able to easily identify what comments are done and not done.
- We keep undone comments yellow
- Clicking done turns comment block into 'unsubmitted state'
**To the reviewer:**
- Easier understanding of unsubmitted states
- All conversations to be yellow/important
**Todo**
- Not all color CSS states correct
- Unpulished checkbox support
Test Plan:
Test leaving comments, published and unpublished. Checking Done, unpublished and published. Check delete states.
From the Diff Author's perspective:
{F352094}
For a Diff commenter's perspective:
{F352095}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T1460, T7660, T7503
Differential Revision: https://secure.phabricator.com/D12171
Summary:
This returns the PHID of the current revision owner, or the commit author, if one exists.
NOTE: For drafts, we currently return `null`; I'll fix that in a future change. Should be correct for submitted comments.
Test Plan: Added an inline, nothing seemed broken.
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D12185
Summary: Fixes T7648. The existence of this file is not necessarily obvious and is important to backup, transfer, and restore.
Test Plan: Read documentation.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T7648
Differential Revision: https://secure.phabricator.com/D12183
Summary: Fixes T7675. epriestley caught this in code review and I didn't implement it all the way
Test Plan: logicypoo
Reviewers: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7675
Differential Revision: https://secure.phabricator.com/D12181
Summary: Fixes T7672. This had two `%d` conversions but only one parameter.
Test Plan: Adjusted limit to 0, viewed a merge, saw proper message.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7672
Differential Revision: https://secure.phabricator.com/D12180
Summary: Ref T7670. Add a few unit tests to make sure deleting everyone works. Also change remaining processRequest to handleRequest while in there.
Test Plan: `arc unit` passed
Reviewers: chad, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7670
Differential Revision: https://secure.phabricator.com/D12179
Summary:
Ref T7566. This does a big chunk of what's left
- Main view
- "Rooms" sub header
- 5 Rooms shown at a time, with room you're looking at in the top on page load
- e.g. viewing /conpherence/x/ the room x is at top always
- solves corner case of when you have yet to "join" the room
- "See More" link takes you to application search for rooms you have participated in
- if no rooms, there is a "Create Room" and "Find Rooms" links.
- "Messages" sub header
- same as before
- policy icons showing up in the menu
- Durable column view - still just the latest N, no changes really there
- Transactions - special cased rendering to try to say room vs thread as appropos
- Bug fix - we weren't recording the initial participants transaction post D12177 / D12163. This fixes that.
Should probably test pagination, and if you want to show more than 5 rooms of have it behave more like messages (where you can wind up in the middle of a paginated list) that will be more work. Also, if lots of messages / rooms (100 is the limit) we might not display rooms if we're supposed to. Yay whale usage! :D
Test Plan: made a new room - success. made a new message - success. viewed a room from /conpherenece/room/ i wasn't a participant in and noted it showed up at the top of the five rooms. clicked around rooms and stuff loaded nicely.
Reviewers: chad, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7566
Differential Revision: https://secure.phabricator.com/D12178
Summary: Fixes T7669. Broken by D12163 re-factoring and foolihardiness of test coverage. Notably / interestingly, this was broken before D12163 from not implementing policy correctly, so Conpherence has been broken for a bit with few reports.
Test Plan: had user send himself a message
Reviewers: chad, epriestley
Reviewed By: chad, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7669
Differential Revision: https://secure.phabricator.com/D12177
Summary: Moving to an rgba color here to work better with all the various header colors.
Test Plan: Reload sandbox, see new icon color.
Reviewers: epriestley, btrahan
Reviewed By: btrahan
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D12176
Summary: This is just a quick pass to fix a few bugs and spacing issues, Phortune itself could probably use some more custom UI, but that'll require some thought and abstraction. This also adds a new taller table CSS, which I mayyyy make automatic on tables with few rows, we'll see.
Test Plan: Browsed my Phortune account, tested new spacing on `admin` for 'full effect'
Reviewers: epriestley, btrahan
Reviewed By: btrahan
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D12115
Summary: Fixes T7665. Unfortunately when the user messes this up its not easy to partially recover so we just reset that time to the default.
Test Plan: set time to "00:00 AM" and got a sensible error.
Reviewers: chad, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7665
Differential Revision: https://secure.phabricator.com/D12174
Summary: Fixes T7655. We'll set tighter spacing around edit clusters. Also darkened up the date marker and remove unused `phabricator-transaction-view` CSS that was still scattered around the site.
Test Plan: Test a full and column multi-edit spam. Visited Ponder and Diffusion, noticed no issues using those apps. Grepped for other users of `phabricator-transaction-view`
Reviewers: epriestley, btrahan
Reviewed By: btrahan
Subscribers: Korvin, epriestley
Maniphest Tasks: T7655
Differential Revision: https://secure.phabricator.com/D12148
Summary:
Fixes T7629 plus an un filed bug that's breaking creating new threads since we need to add participants EVEN EARLIER than we were doing it now that policy is actually enforced.
Back to the main thrust of this, there is one UI corner case - in the main view if you go from 1:1 to 1:1:1 (i.e. add a 3rd recipient, or Nth in a row) the icon only updates on page reload. I figure this will get sorted out at a later refactor as we make the client better / share more code with durable column.
One other small behavioral oddity is in the main view sometime we start loading with no conpherence. in that case, rather than show some incorrect icon, we show no icon (and "no title") and then things change at load. Seems okay-ish.
Finally, @chad - the CSS is a very work-man-like "use the built in stuff you can specify from PHP" so I'm sure it needs some love.
Test Plan: made all sorts of rooms and threads and liked the icons. noted smooth loading action as i switched around
Reviewers: chad, epriestley
Reviewed By: epriestley
Subscribers: Korvin, chad, epriestley
Maniphest Tasks: T7629
Differential Revision: https://secure.phabricator.com/D12163
Summary:
Ref T6755. In Git and Subversion, running `git clone http://google.com/` or `svn checkout http://google.com/` does not echo the response body.
In Mercurial, it does. Censor it from the output of `hg pull` and `hg clone`. This prevents an attacker from:
- Creating a Mercurial remote repository with URI `http://10.0.0.1/secrets/`; and
- reading the secrets out of the error message after the clone fails.
Test Plan: Set a Mercurial remote URI to a non-Mercurial repository, ran `repository update`, saw censored error message.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6755
Differential Revision: https://secure.phabricator.com/D12170
Summary: Ref T6755. I'll add some notes there about specifics.
Test Plan:
- Made connections to HTTP and HTTPS URIs.
- Added some debugging code to verify that HTTP URIs were pre-resolved.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6755
Differential Revision: https://secure.phabricator.com/D12169
Summary:
Ref T6755. Although we do not return response bodies, it is possible to perform crude portscanning if you can execute a DNS rebinding attack (which, for now, remains theoretical).
Limit users to 60 requests / hour to make it less feasible. This would require ~30 years to portscan all ports on a `/32` netblock.
Users who can guess that services may exist can confirm their existence more quickly than this, but if the attacker already had a very small set of candidate services it seems unlikely that portscanning would be of much use in executing the attack.
This protection should eventually be applied to T4190, too (that task also has other considerations).
Test Plan: Set rate limit very low, hit rate limit.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6755
Differential Revision: https://secure.phabricator.com/D12168
Summary:
Fixes T7602. This is similar to the existing behavior for "changes planned" and "needs revision" revisions.
Also fix the "Update Diff" workflow so it correctly selects closed revisions as attachable.
Test Plan: Updated an abandoned revision, saw it change to "Needs Review".
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7602
Differential Revision: https://secure.phabricator.com/D12167
Summary:
Fixes T7664. When there are a large number of tasks (400+) with the same subpriority (which can happen if the subpriority features are rarely used), it may take more than 30 seconds to rebalance them.
Make the algorithm more aggressive about rebalancing homogenous blocks of tasks.
This may need to get even fancier, but I'd guess it can process blocks 1-2 orders of magnitude larger, which should be ~all installs.
(If someone still hits issues with this, I'll make it fancier.)
Once a block is rebalanced, it doesn't need to be rebalanced again (at least, not as a whole block) so we basically just need to get over the initial hurdle here and then we're good.
In the worst case, we can provide `bin/maniphest rebalance` or similar and do the rebalance step offline.
And, in any case, we have more test coverage here now.
Test Plan:
- Existing tests.
- New tests.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7664
Differential Revision: https://secure.phabricator.com/D12166
Summary: Enables a basic tooltip when using icon buttons and a convenience method for setting an icon.
Test Plan: Built a UIExample.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D12172
Summary: Ref T1460, this adds additional buttons colors and styles for use in inline comments. Will also backport to Calendar and PHUIInfoView
Test Plan:
Review new buttons and hover states in UI Examples.
{F350549}
{F350550}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T1460
Differential Revision: https://secure.phabricator.com/D12162
Summary: Fixes T7586. If you can't edit a room, the pertinent UI is greyed out. One exception is the title of the room in the full viewer; this crumb is not disabled as it would be hard to read. Otherwise though, everything is disabled nicely.
Test Plan: tried to add participants when I wasn't allowed to and got an error. added participants otherwise okay. tried to edit title when i wasn't allowed and got an error. otherwise okay. left conpherence threads / rooms successfully.
Reviewers: epriestley, chad
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7586
Differential Revision: https://secure.phabricator.com/D12161
Summary: Ref T7660. I'm not toggling "inline-state-is-draft" correctly in JS yet since it's a little tricky (you can reload to see it) but the main state should work.
Test Plan:
- Clicked "done", saw comment opacity fade with placeholder style.
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T7660
Differential Revision: https://secure.phabricator.com/D12160
Summary: Fixes T5658. Over a long period of time, some cruft can build up here. Only show revisions which have been updated in the last 30 days.
Test Plan:
- Viewed panel in Differential and Diffusion.
- Changed limit from 30 days to 30 seconds and saw no revisions.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5658
Differential Revision: https://secure.phabricator.com/D12158
Summary:
Ref T6755. This mitigates an attack where you:
- compromise an administrative account;
- configure "text/plain" as an "image" MIME type; and
- create a new macro sourced from a sensitive resource which is locally accessible over HTTP GET, using DNS rebinding.
You can then view the content of the resource in Files. By preventing the compromised account from reconfiguring the MIME types, the server will instead destroy the response and prevent the attacker from seeing it.
In general, these options should change very rarely, and they often sit just beyond the edge of security vulnerabilities anyway.
For example, if you ignore the warnings about an alternate file domain and elect to serve content from the primary domain, it's still somewhat difficult for an attacker to exploit the vulnerability. If they can add "text/html" or "image/svg+xml" as image MIME types, it becomes trivial. In this case not having an alternate domain is the main issue, but easy modification of this config increases risk/exposure.
Test Plan: Viewed affected config and saw that it is locked.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6755
Differential Revision: https://secure.phabricator.com/D12154
Summary: Fixes T6378.
Test Plan: Set config to `/.*/`, created a new diff, everything was collapsed as generated.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T6378
Differential Revision: https://secure.phabricator.com/D12159
Summary:
Ref T6755. This improves our resistance to SSRF attacks:
- Follow redirects manually and verify each component of the redirect chain.
- Handle authentication provider profile picture fetches more strictly.
Test Plan:
- Tried to download macros from various URIs which issued redirects, etc.
- Downloaded an actual macro.
- Went through external account workflow.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6755
Differential Revision: https://secure.phabricator.com/D12151
Summary: This signature changed at some point after I tested things and I didn't catch it.
Test Plan: Destroyed a chunked large file with `bin/remove`.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D12152
Summary:
Ref T7585. This implements everything specified, with a few caveats
- since rooms you have yet to join can't be viewed in the column yet, the column view has some bugs and isn't expected to work.
- the room you're looking at is just pre-pending to the top of the "recent" list
Test Plan: made a room that no one could join. verified when viewing that there was no comment ui. made a room that others could join. verified folks who had yet to join had a "join" button with an area for text. tried joining with / without message text and it worked in both cases
Reviewers: chad, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7585
Differential Revision: https://secure.phabricator.com/D12149
Summary:
Ref T1266. We won't detect a move/copy if fewer than 3 lines are changed.
However, you may move a block like:
Complicated Line A
Trivial Line B
Complicated Line C
...where "Trivial Line B" is something like a curly brace. If you move this block somewhere that happened to previously have a similar trivial curly brace line, we won't be able to find 3 contiguous added lines in order to detect the copy/move.
Instead, consider both changed and unchanged lines when trying to find contiguous blocks. This allows us to detect across gaps where lines were not actually changed.
This new algorithm may be too liberal (for example, we may end up incorrectly identifying moved/copied code before or after changed lines, not just between changed lines), but we can keep an eye on it and tweak it. The algorithm is better factored and better covered, now.
Test Plan:
- Added a unit test for this case.
- Spot-checked a handful of diffs and generally saw behavior that made sense and looked better than before.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1266
Differential Revision: https://secure.phabricator.com/D12146
Summary:
Ref T1266. This doesn't change any behaviors, but some of this code has a lot of really complicated conditionals and I tried to break that up a bit.
Also, reexpress this stuff in terms of the "structured" parser in D12144.
Test Plan: Unit tests still pass. They aren't hugely comprehensive but did reliably fail when I screwed stuff up.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1266
Differential Revision: https://secure.phabricator.com/D12145
Summary:
Ref T1266. This prepares to fix case (2) on T1266 by improving the robustness of hunk parsing.
In particular, the copy detection code abuses this API because it isn't currently expressive or flexible enough.
Make it more flexible and cover it exhaustively.
I'll move callsites to the new stuff in upcoming revisions.
Test Plan: Unit tests.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1266
Differential Revision: https://secure.phabricator.com/D12144
Summary: Fixes T7578. This was pretty easy because conpherence funnels all transacton stuff through this spot
Test Plan: made a new room so only my user was a participant. wrote "@myself will work and @anotherguy will be greyed out" and so it was as expected
Reviewers: chad, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7578
Differential Revision: https://secure.phabricator.com/D12114
Summary: Ref T7584. This hits all the major bullets there. Next step on T7584 is figuring out how it integrates into the full UI and column UI. That said, this is a bit buggy feeling right now since Conpherence as is assumes you are a participant all over the place and rooms make no such assumption. I'll probably this bit up next.
Test Plan:
viewed /conpherence/room/ and saw stuff. viewed the "participant" query as two different users and saw different correct result sets. made a room via the button and it worked. tried to view a room I wasn't a participant in and it failed horribly, which is something to fix in a future diff
created a thread via "send message" on a user profile and it worked
Reviewers: chad, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7584
Differential Revision: https://secure.phabricator.com/D12113
Summary: Fixes T7377. We don't expand projects into members when sending notifications right now. Instead, expand them.
Test Plan:
- Added a project as a reviewer to a revision, made a comment, saw project members receive a read notification + email (with appropriate preferences).
- There's meaningful test coverage on the core mail stuff.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7377
Differential Revision: https://secure.phabricator.com/D12142
Summary:
Ref T5644. Ref T7472. Currently, we highlight each line of pattern search results in Diffusion.
- This is incredibly slow for non-PHP languages which need to shell out to Pygments.
- A lot of this highlighting isn't very useful anyway, because it doesn't have any context.
Instead, try to highlight pattern matches but don't highlight the source itself.
Test Plan: {F349637}
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7472, T5644
Differential Revision: https://secure.phabricator.com/D12141
Summary:
Ref T5644. See some discussion in D8040.
When a file is very large (more than 64KB of text), don't activate syntax highlighting by default. This should prevent us from wasting resources running `pygmentize` on enormous files.
Users who want the file highlighted can still select "Highlight As...".
The tricky part of this diff is separating the headers into "changeset" headers and "undershield" (rendering) headers. Specifically, a file might have these headers/shields:
- "This file is newly added."
- "This file is generated. Show Changes"
- "Highlighting is disabled for this large file."
In this case, I want the user to see "added" and "generated" when they load the page, and only see "highlighting disabled" after they click "Show Changes". So there are several categories:
- "Changeset" headers, which discuss the changeset as a whole (binary file, image file, moved, added, deleted, etc.)
- "Property" headers, which describe metadata changes (not relevant here).
- "Shields", which hide files from view by default.
- "Undershield" headers, which provide rendering information that is only relevant if there is no shield on the file.
Test Plan:
- Viewed a diff with the library map, clicked "show changes", got a "highlighting disabled" header back with highlighting disabled.
- Enabled highlighting explicitly (this currently restores the shield, which it probably shouldn't, but that feels out of scope for this change). The deshielded file is highlighted per the user's request.
- Loaded context on normal files.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: joshuaspence, epriestley
Maniphest Tasks: T5644
Differential Revision: https://secure.phabricator.com/D12132
Summary:
Ref T1460. Ref T6403. Replace `Diffusion::INLINEDONE` with `Transactions::INLINESTATE` and generalize things enough that we can lift it into core.
The next change will lift Differential's similar implementation into the core.
Also start implementing a fix for T6403, providing an alternate hook for optional builtin transactions.
Test Plan: Changed inline state in Diffusion.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6403, T1460
Differential Revision: https://secure.phabricator.com/D12129
Summary:
Ref T1460. See D12126. This is essentially the same change, but for Diffusion.
This is a bit copy/pastey. I'm going to make an effort to lift inline handling into the core before pushing this in, so hopefully that will clean things up a bit.
Test Plan: Submitted stuff in Diffusion and got checkmarks to publish.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1460
Differential Revision: https://secure.phabricator.com/D12128
Summary:
Ref T1460. When a revision author updates/comments/etc on a revision, publish all their checkmarks.
This doesn't handle Diffusion/audits yet.
Test Plan: {F346870}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: yelirekim, epriestley
Maniphest Tasks: T1460
Differential Revision: https://secure.phabricator.com/D12126
Summary:
Ref T1460. This just barely works, but throwing it up in case any of it sounds mechanically crazy before we build integrations/UI/etc.
Specifically, these are the behaviors:
- You can mark your own draft comments as "done" before you submit them. The intent is to let reviewers mark their stuff advisory/minor/not-important before they submit it, to hint to authors that they don't expect the feedback to necessarily be addressed (maybe it's a joke, maybe it's just discussion, maybe it's "consider..").
- You can mark others' published comments as "done" if you're the revision/commit author. The intent is to keep this lightweight by not requiring an audit trail of who marked what done when. If anyone could mark anything done, we'd have to have some way to show who marked stuff.
- When you mark stuff done (or unmark it), it goes into a "draft" state, where you see the change but others don't see it yet. The intent is twofold:
- Be consistent with how inlines work.
- Allow us to publish a "epriestley updated this revision + epriestley marked 15 inlines as done" story later if we want. This seems more useful than publishing 15 "epriestley marked one thing as done" stories.
- The actual bit where done-ness publishes isn't implemented.
- UI is bare bones.
- No integration with the rest of the UI yet.
Test Plan: Clicked some checkboxes.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: paulshen, chasemp, epriestley
Maniphest Tasks: T1460
Differential Revision: https://secure.phabricator.com/D12033
Summary:
Fixes T1102. If you don't use `arc`, the web workflow requires some extra needless steps when updating diffs.
Provide a more streamlined "Update Diff" workflow.
Test Plan: {F347750}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1102
Differential Revision: https://secure.phabricator.com/D12131
Summary:
Ref T6755. This is a partial fix, but:
- Allow netblocks to be blacklisted instead of making the feature all-or-nothing.
- Default to disallow requests to all reserved private/local/special IP blocks. This should generally be a "safe" setting.
- Explain the risks better.
- Improve the errors rasied by Macro when failing.
- Removed `security.allow-outbound-http`, as it is superseded by this setting and is somewhat misleading.
- We still make outbound HTTP requests to OAuth.
- We still make outbound HTTP requests for repositories.
From a technical perspective:
- Separate URIs that are safe to link to or redirect to (basically, not "javascript://") from URIs that are safe to fetch (nothing in a private block).
- Add the default blacklist.
- Be more careful with response data in Macro fetching, and don't let the user see it if it isn't ultimately valid.
Additionally:
- I want to do this check before pulling repositories, but that's enough of a mess that it should go in a separate diff.
- The future implementation of T4190 needs to perform the fetch check.
Test Plan:
- Fetched a valid macro.
- Fetched a non-image, verified it didn't result in a viewable file.
- Fetched a private-ip-space image, got an error.
- Fetched a 404, got a useful-enough error without additional revealing response content (which is usually HTML anyway and not useful).
- Fetched a bad protocol, got an error.
- Linked to a local resource, a phriction page, a valid remote site, all worked.
- Linked to private IP space, which worked fine (we want to let you link and redierect to other private services, just not fetch them).
- Added and executed unit tests.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6755
Differential Revision: https://secure.phabricator.com/D12136
Summary: Ref T7627. This centralizes this transaction construction code so the unit tests and Instances can both use it.
Test Plan: See D12116.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7627
Differential Revision: https://secure.phabricator.com/D12118
Summary: Fixes T7625. The way the regexp worked, "unusual" terminal characters required at least one character as a prefix in order to match. Allow 0 instead, so `#a1` matches.
Test Plan: Added and executed unit test.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7625
Differential Revision: https://secure.phabricator.com/D12123
Summary: Ref T7611. This should let us figure out the root cause, hopefully.
Test Plan: iiam
Reviewers: joshuaspence, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7611
Differential Revision: https://secure.phabricator.com/D12124
Summary:
Fixes T7485. Before applications had proper policies, we gated access by requiring the viewer be an administrator.
This is now redundant (CAN_EDIT on applications has the same effect, and performs the same check), and may some day be wrong (we might let administrators configure a different policy to control who can configure applications). Today, it gets the policy dialog wrong.
Test Plan:
Clicked "Edit Policies" as a non-administrator, was unable to, got nice error:
{F346598}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7485
Differential Revision: https://secure.phabricator.com/D12125
Summary: Fixes T7620. I don't fully understand exactly what's going on here, but we don't actually need to call `flush()`.
Test Plan:
- Put timing code around the `echo`.
- Made a fake page that emitted a lot of data.
- Saw the `echo` block proportionate to data size under `curl --limit-rate ...`.
- See T7620.
- Downloaded a large file, got a reasonable progress bar and no obvious memory use issues.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: jlarouche, rbalik, epriestley
Maniphest Tasks: T7620
Differential Revision: https://secure.phabricator.com/D12127
Summary: Fixes T7647. We float both the time and description here and want the fluidity.
Test Plan: Review a new Conpherence in FF, Safari, Chrome.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7647
Differential Revision: https://secure.phabricator.com/D12137
Summary:
Fixes T7563. Fixes T5201. Reframe this as two separate operations:
- Move before or after a task.
- Move to the beginning or end of a priority.
Then:
- Make all the order queries unambiguous and properly reversible, with an explicit `id` order.
- Just reuse `ManiphestTask` to get results in the correct order.
- Simplify the actual transaction apply logic.
- Detect and recover from cases where tasks have identical or similar subpriorities.
Test Plan:
- Wrote and executed unit tests.
- Dragged and dropped tasks within priorities and between priorities in the main Maniphest view.
- Dragged and dropped tasks within priorities in the workboard view, when ordered by priority.
- Also poked at the "natural" order, but that shouldn't be affected.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: chad, epriestley
Maniphest Tasks: T5201, T7563
Differential Revision: https://secure.phabricator.com/D12121
Summary:
Via HackerOne. We aren't correctly escaping the date, so a user can XSS themselves by setting their date format creatively.
This construction is very unusual and I don't think we do anything similar elsewhere, so I can't come up with a systematic change which would prevent this in the general case.
Test Plan: Set date format to tag junk, got self-XSS before patch and proper escaping after the patch.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D12117
Summary:
Fixes T7621. The engine selection code started out making sense, but didn't make as much sense by the time I was done with it.
Specifically, from the vanilla file upload, we may incorrectly try to write directly to the chunk storage engine. This is incorrect, and produces a confusing/bad error.
Make chunk storage engines explicit and don't try to do single-file one-shot writes to them.
Test Plan:
- Tried to upload a large file with vanilla uploader, got better error message.
- Uploaded small and large files with drag and drop.
- Viewed {nav Files > Help/Options}.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7621
Differential Revision: https://secure.phabricator.com/D12110
Summary:
Ref T7522. This is mostly useful in the cluster, but could be useful for external installs too.
If you want to import an instance into a test/dry-run state (in the cluster, to test an import; in the general case, to do something like test new hardware or configuration), you currently risk spamming users with a lot of duplicate notifications. In particular, if Phabricator tracks remotes, both instances will continue importing commits and sending email about them. Both instances will try to publish to mirrors, too, which could be bad news, and both instances will try to update linked services.
Instead, provide a flag to let an instance run in "silent mode", which disables all outbound messaging and data.
We need to remember to support this flag on any new outbound channels, but we add about one of those per year so I think that's reasonable.
Test Plan:
- Flipped config.
- Saw it void email, feed and mirroring.
- Didn't test SMS since it's not really in use yet and not convenient to test.
- (Can you think of any publishing I missed?)
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7522
Differential Revision: https://secure.phabricator.com/D12109
Summary: Fixes T7618. The "button" needs to be a PHUIButtonView later on.
Test Plan: Forced condition, loaded page, saw button instead of fatal.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7618
Differential Revision: https://secure.phabricator.com/D12108
Summary:
Indigo apparently used to be pink and was fixed in D10707.
This looks like it never got changed
Test Plan: Flag was purple, then it was pink
Reviewers: chad, #blessed_reviewers
Reviewed By: chad, #blessed_reviewers
Subscribers: epriestley, #flags
Differential Revision: https://secure.phabricator.com/D12101
Summary:
Ref T7149. When users give us dumpfiles for import, they will almost inevitably use the `phabricator` namespace. They need to be renamed to use an instance namespace.
We can do this either by:
- importing the data first, then renaming; or
- renaming first, then importing.
This implements the second one, basically `storage renamespace --in dump.sql --from phabricator --to instancename > instance.sql`.
Renaming first is a little hackier since we have to `preg_match()` a SQL dump file, but I think it's better overall:
- With only one database, it lets you dump/import without downtime.
- If you have development stuff in a development environment in the `phabricator` namespace, you don't have to move it aside to do an import.
- No possibility that two people doing an import at the same time on the same box will collide with each other.
- You can do the rename once and then repeat the import process with the renamed dump more easily.
- No tricky stuff with modern Phabricator running against an old dump and the database names not matching up.
None of this is super important, but it just makes large dumps a bit easier to work with, and the dumpfile format is regular enough that this seems unlikely to ever really not work.
Test Plan: Renamespaced a dump, did a `diff -u`, saw all the relevant parts changed (and only those parts changed).
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7149
Differential Revision: https://secure.phabricator.com/D12105
Summary: Ref T7582. Also adds the basic logic for "rooms" implementation. Also makes sure we use the initializeNewThread method as appropriate.
Test Plan: made a new conpherence and it worked!
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7582
Differential Revision: https://secure.phabricator.com/D12103
Summary: Fixes T7583. We also add `key_room`, which uses isRoom and dateModified since a very common view of rooms is going to be ordered by last updated.
Test Plan: made the conpherence view controller query specify `withIsRoom(true)` and `withIsRoom(false)`. The former made the controller correctly 404 while the latter had no change in functionality.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7583
Differential Revision: https://secure.phabricator.com/D12102
Summary:
Ref T7607. Ref T7522.
- For the import tools, I want to send from "Phacility Support <support@phacility.com>".
- In the general case, I want to send billing mail from merchants (T7607) later on.
Test Plan: Sent an email and saw the desired "From" address.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7607, T7522
Differential Revision: https://secure.phabricator.com/D12100
Summary:
Ref T7522. This seems like the least-bad approach to a messy issue:
- When backfilling accounts from an imported instance, I need to write ExternalAccount rows to the instance to link instance accounts with upstream accounts.
- We do this in the daemons in some other cases, which lets us run all the code in the context of the instance. However, I really want to do this in-process here because it's way way simpler and we need to do writes to //both// the instance and the upstream, and they're interleaved, and they depend on one another.
- I can hard-code the query with `qsprintf()` but that feels like 100x worse than this.
This allows me to do this:
```
id(new PhabricatorExternalAccount())
->setForcedConnnection($instance_conn)
->...
->save();
```
...and get a write to the instance database, which is at least not completely a minefield.
Test Plan: Backfilled instance accounts and got interleaved instance and upstream writes as expected.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7522
Differential Revision: https://secure.phabricator.com/D12098
Summary: Conpherence Full modernize pass, setting standard space and colors on all widget panels. Moved menu back to 240px as the narrow column wasn't really usefull. Removed 'subtitle' on menu, seems simpler but almost under-designed. Subtitle isn't particularly useful and I plan on adding audience icons next (single, group, project, public) so I think this is the right direction.
Test Plan:
Tested with and without number columns on the menu, test with files, calendar dates, removing participants.
{F337941}
{F337942}
{F337943}
Reviewers: epriestley, btrahan
Reviewed By: btrahan
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D12078
Summary:
Ref T7149. Currently, global drag and drop always uses the most open visibility policy on the install. This was appropriate before the application preference was introduced, but default to the application preference now.
In particular, this supports a default value of "Administrators" in the Phacility cluster.
Also simplify/clean up some code.
Test Plan:
- Set application default policy to "Adminstrators".
- Uploaded file via drag-and-drop, saw "administrators" policy.
- Uploaded file via `arc upload`, saw "administrators" policy.
- Saw better URI for a text file upload after patch.
- Uploaded file via drag-and-drop-to-textarea, saw "only viewer" policy.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7149
Differential Revision: https://secure.phabricator.com/D12093
Summary: Rewrite this expression so that the second parameter to `qsprintf` is a scalar.
Test Plan: `arc lint`
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11913
Summary:
Fixes T6713. The idea is to keep checking what's going on in the update paths that touch the DOM. If we're doing an update or should be doing a different update, then we bail early.
This is the type of code + testing that makes me dizzy after awhile, but I think it works...
Test Plan:
added a "forceStall" parameter to the column view controller, which when specified sleeps for seconds before returning. I then augmented the JS such that the "send message" code for the durable column would specifiy this parameter.
For actual testing, I then spammed the heck out of the durable column channel and saw each message only once. I also spammed the column, switched browsers to a user on the same thread in the normal "speedy" view, sent messages there, and also only received one copy
Reviewers: chad, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6713
Differential Revision: https://secure.phabricator.com/D12092
Summary:
Fixes T7545. Turns out we had the right logic to handle this basically, and just needed to variablize the CSS class that gets added / removed as appropos.
Note the new behavior is to keep the icon highlighted just with no number. This emulates how it would work if e.g. there was no unread message in the first place and you just clicked the message icon to invoke the message menu.
Test Plan: had a durable conpherence open for user A with user B. used a separate browser to send message as user B. reloaded as user A - saw new message in conpherence durable column and the "1" unread icon. I then clicked the "1" and saw it disappear as expected
Reviewers: chad, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7545
Differential Revision: https://secure.phabricator.com/D12091
These parameters were set inconsistently. Use the value that the storage task uses.
Also, allow `bin/phortune invoice` to invoice in the past and future to aid testing.
Summary:
Ref T7149. We can simplify configuration somewhat by removing the upload limit setting, now that we support arbitrarily large files.
- Merge configuration documentation.
- Tell users to set things to at least 32MB. This is 8MB maximum one-shot file + 4x headroom. Chunk sizes are 4MB.
Test Plan:
- Faked all the setup warnings.
- Read documentation.
- Uploaded some files.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7149
Differential Revision: https://secure.phabricator.com/D12083
Summary: Ref T7149. This works now, so enable it.
Test Plan:
- Uploaded large and small files in Firefox, Safari and Chrome.
- Uploaded large files with `arc upload`.
- Stopped/resumed large files with all clients.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7149
Differential Revision: https://secure.phabricator.com/D12079
Summary: Ref T7149. This was just to make testing easier, but chunking substantially works now.
Test Plan: `grep`
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7149
Differential Revision: https://secure.phabricator.com/D12076
Summary:
Right now, if a daemon dies it can leave the setup warning around for like 10 minutes or something until we reap it.
Tighten the warning so we only care about actively running daemons.
Test Plan: Checked setup issues.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D12088
Summary: Ref T7149. Return a real iterator from the Chunk engine, which processes chunks sequentially.
Test Plan:
This is a bit hard to read, but shows the underlying chunks being accessed one at a time and only some being accessed when requesting a range of a file:
```
$ ./bin/files cat F878 --trace --begin 100 --end 256
...
>>> [10] <query> SELECT * FROM `file_storageblob` WHERE `id` = 85
<<< [10] <query> 240 us
better software.
Phabricat>>> [11] <query> SELECT * FROM `file_storageblob` WHERE `id` = 84
<<< [11] <query> 205 us
or includes applications for:
>>> [12] <query> SELECT * FROM `file_storageblob` WHERE `id` = 83
<<< [12] <query> 226 us
- reviewing and auditing source>>> [13] <query> SELECT * FROM `file_storageblob` WHERE `id` = 82
<<< [13] <query> 203 us
code;
- hosting and browsing >>> [14] <query> SELECT * FROM `file_storageblob` WHERE `id` = 81
<<< [14] <query> 231 us
repositories;
- tracking bugs;
```
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: joshuaspence, epriestley
Maniphest Tasks: T7149
Differential Revision: https://secure.phabricator.com/D12073
Summary:
Ref T7149. This still buffers the whole file, but is reaaaaal close to not doing that.
Allow Responses to be streamed, and rewrite the range stuff in the FileResponse so it does not rely on having the entire content available.
Test Plan:
- Artificially slowed down downloads, suspended/resumed them (works in chrome, not so much in Safari/Firefox?)
- Played sounds in Safari/Chrome.
- Viewed a bunch of pages and files in every browser.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: joshuaspence, epriestley
Maniphest Tasks: T7149
Differential Revision: https://secure.phabricator.com/D12072
Summary: Ref T7149. A couple diffs down the line, this will let us emit chunked files without doing all the work up front or holding the entire file in RAM.
Test Plan:
(Some newlines added for clarity.)
```
$ ./bin/files cat F942
ABCDEFGHIJKLMNOPQRSTUVWXYZ
$ ./bin/files cat F942 --begin 1
BCDEFGHIJKLMNOPQRSTUVWXYZ
$ ./bin/files cat F942 --end 10
ABCDEFGHIJ
$ ./bin/files cat F942 --begin 3 --end 5
DE
$
```
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: joshuaspence, epriestley
Maniphest Tasks: T7149
Differential Revision: https://secure.phabricator.com/D12071
Summary: Ref T7149. We can't compute hashes of large files efficiently, but we can resume uploads by the same author, with the same name and file size, which are only partially completed. This seems like a reasonable heuristic that is unlikely to ever misfire, even if it's a little magical.
Test Plan:
- Forced chunking on.
- Started uploading a chunked file.
- Closed the browser window.
- Dropped it into a new window.
- Upload resumed //(!!!)//
- Did this again.
- Downloaded the final file, which successfully reconstructed the original file.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: joshuaspence, chad, epriestley
Maniphest Tasks: T7149
Differential Revision: https://secure.phabricator.com/D12070
Summary: Changes the text to just "Stay", which is still obvious what it means, with less copy. Fixes T7027
Test Plan: Now works on mobile.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7027
Differential Revision: https://secure.phabricator.com/D12075
Summary:
Ref T7149. This adds chunking support to drag-and-drop uploads. It never activates right now unless you hack things up, since the chunk engine is still hard-coded as disabled.
The overall approach is the same as `arc upload` in D12061, with some slight changes to the API return values to avoid a few extra HTTP calls.
Test Plan:
- Enabled chunk engine.
- Uploaded some READMEs in a bunch of tiny 32 byte chunks.
- Worked out of the box in Safari, Chrome, Firefox.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7149
Differential Revision: https://secure.phabricator.com/D12066
Summary:
Ref T7149. This flags allocated but incomplete files and doesn't explode when trying to download them.
Files are marked complete when the last chunk is uploaded.
I added a key on `<authorPHID, isPartial>` so we can show you a list of partially uploaded files and prompt you to resume them at some point down the road.
Test Plan: Massaged debugging settings and uploaded README.md very slowly in 32b chunks. Saw the file lose its "Partial" flag when the last chunk finished.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: joshuaspence, epriestley
Maniphest Tasks: T7149
Differential Revision: https://secure.phabricator.com/D12063
Summary:
Ref T7149. This makes debugging some of this stuff a bit easier by removing the HTTP part in the middle.
Particularly, I anticipate having this stream data chunk-by-chunk in the near future.
Test Plan: Ran `files cat F23`, got output.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: joshuaspence, epriestley
Maniphest Tasks: T7149
Differential Revision: https://secure.phabricator.com/D12062
Summary:
Ref T7149. This isn't complete and isn't active yet, but does basically work. I'll shore it up in the next few diffs.
The new workflow goes like this:
> Client, file.allocate(): I'd like to upload a file with length L, metadata M, and hash H.
Then the server returns `upload` (a boolean) and `filePHID` (a PHID). These mean:
| upload | filePHID | means |
|---|---|---|
| false | false | Server can't accept file.
| false | true | File data already known, file created from hash.
| true | false | Just upload normally.
| true | true | Query chunks to start or resume a chunked upload.
All but the last case are uninteresting and work like exising uploads with `file.uploadhash` (which we can eventually deprecate).
In the last case:
> Client, file.querychunks(): Give me a list of chunks that I should upload.
This returns all the chunks for the file. Chunks have a start byte, an end byte, and a "complete" flag to indicate that the server already has the data.
Then, the client fills in chunks by sending them:
> Client, file.uploadchunk(): Here is the data for one chunk.
This stuff doesn't work yet or has some caveats:
- I haven't tested resume much.
- Files need an "isPartial()" flag for partial uploads, and the UI needs to respect it.
- The JS client needs to become chunk-aware.
- Chunk size is set crazy low to make testing easier.
- Some debugging flags that I'll remove soon-ish.
- Downloading works, but still streams the whole file into memory.
- This storage engine is disabled by default (hardcoded as a unit test engine) because it's still sketchy.
- Need some code to remove the "isParital" flag when the last chunk is uploaded.
- Maybe do checksumming on chunks.
Test Plan:
- Hacked up `arc upload` (see next diff) to be chunk-aware and uploaded a readme in 18 32-byte chunks. Then downloaded it. Got the same file back that I uploaded.
- File UI now shows some basic chunk info for chunked files:
{F336434}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: joshuaspence, epriestley
Maniphest Tasks: T7149
Differential Revision: https://secure.phabricator.com/D12060
Summary: Fixes T7539. We need to set the "with-column" css class on the document body to make things like the jx-mask style-able. Also, make the global upload control only do it for the standard phabrcator page and not the document body.
Test Plan: dragged a file to conpherence column and it worked! uploaded a file to homepage with column open and it worked! uploaded a file to /file/ with column open and it worked!
Reviewers: chad, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7539
Differential Revision: https://secure.phabricator.com/D12055
Summary:
Fixes T5843. File storage engines use a very old "selector" mechanism which makes them difficult to extend.
This mechanism predates widespread use of `PhutilSymbolLoader` to discover available implementations at runtime. Runtime discovery has generally proven more flexible and easier to use than explicit selection (although it sometimes needs more UI to support it in cases where order or enabled/disabled flags can not be directly determined).
Use a modern runtime discovery mechanism instead of an explicit selector. This might break any installs which subclassed the `Selector`, but I believe almost no such installs exist, and they'll receive a meaningful exception upon upgrading (any custom engines will no longer implement all of the required methods).
Looking forward, this modernizes infrastructure to prepare for new "virtual" chunked-storage engines, with the eventual goal of supporting very large file uploads and data import into the Phacility cluster.
This uses D12051 to add UI to make it easier to understand the state of storage engines.
Test Plan:
Used new UI panel to assess storage engines:
{F336270}
- Uploaded a small file, saw it go to MySQL engine.
- Uploaded a larger file, saw it go to S3 engine.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5843
Differential Revision: https://secure.phabricator.com/D12053
Summary:
Ref T7149. This is a few steps away, but:
- Generally, I'd like to reduce the amount of "Config" configuration we have.
- One good way to do this is to move it into UIs in Application configuration. We did this with email recently.
- I think this was a great change and I'd like to keep moving in this direction.
- T7149 touches configuration related to file storage engines. Although I'm not planning to fully move configuration into applications yet, it would be easier to debug and test if I could drop a read-only panel there to show engines.
- So, modularize the config stuff so I can add a new panel without hard-coding it.
Test Plan:
- Added, edited, and deleted application emails.
- Viewed non-email application detail pages.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7149
Differential Revision: https://secure.phabricator.com/D12051
Summary: I left in an opacity change by mistake, and fix language on threads.
Test Plan: review in sandbox
Reviewers: epriestley, btrahan
Reviewed By: btrahan
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D12054
Summary: This adds a parameter for time only on Conpherence Transactions, although grepping around, Conpherence might be the only user of this View at this point. Since we have the date markers separately, we can use just the timestamp for a cleaner feel. Also updated a bit of the spacing and colors to match Conpherence Full. Ref T7531
Test Plan:
A lot of Photoshop, and different types of chats.
{F336204}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7531
Differential Revision: https://secure.phabricator.com/D12049
Summary: I don't know the names of all the Conpherences I have ongoing and all my test icons are Psyducks. haha ha ...
Test Plan: Hover over icons, now it's all Psyduck and [No Title].
Reviewers: epriestley, btrahan
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D12050
Summary: This makes macros and memes grow to 100% of their container //at most//, instead of showing a scrollbar. This is useful for overly large macros, smaller spaces like Feed and Conpherences, and Inline Comments. Fixes T7528
Test Plan: Tested a very large macro, a very large meme, and a very very tiny macro. It looks like memes get cached though, unsure if we should clean them up or just leave them
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7528
Differential Revision: https://secure.phabricator.com/D12045
Summary: Ref T7014. This got broken in today's action. For whatever reason the only way I can get the CSS to show up correctly is to move the require statement to where it was before rP5ef99dba2afc9f9ed3ca77707366a78be15f4871. Otherwise, this feature massages the UI a bit to make sure the "loading" stuff is set correctly in this state.
Test Plan: toggled conpherence open and it looked good. reloaded and it looked good.
Reviewers: chad, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7014
Differential Revision: https://secure.phabricator.com/D12047
Summary: Ref T7014. This changes the title and selected icon right as the user clicks it. This could //maybe// be in the "willLoadThread" callback hook, but it doesn't happen every time we load a thread, just **this** time so keep it right in the listener for now.
Test Plan: switched some threads and liked what I saw
Reviewers: epriestley, chad
Subscribers: Korvin, epriestley
Maniphest Tasks: T7014
Differential Revision: https://secure.phabricator.com/D12043
Summary: Ref T7014. This just makes it so there's almost no UI and a simple "You have no messages. <button>Send a message.</button>" UI
Test Plan: hacked the code such that should_404 and conpherence were false and null respectively. verified i got the right ui in the durable column. verified send a message button worked, ending up with me in main conpherence view on the right message
Reviewers: chad, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7014
Differential Revision: https://secure.phabricator.com/D12042
Summary: Numerous visual updates to the Durable Column, mostly to emulate current Conpherence look and feel.
Test Plan: Lots of little pixel chasing. Also Chrome, Firefox.
Reviewers: epriestley, btrahan
Reviewed By: btrahan
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D12041
Summary:
This is cool in theory, but has broken like 5 times and is broken now too. The CSS magic just isn't robust enough to keep up with CSS changes.
Just strip it out for now; if we come up with some more durable replacement we can put that back in its place.
Test Plan: Typed konami code, page didn't break horribly.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D12039
Summary: When you open the column, keep it open on future requests.
Test Plan: Opened column, clicked to Conpherence (no column), clicked elsewhere (column again), reloaded page (column), closed column, clicked something (no column).
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D12038
Summary:
Fixes T7060. Removes some hard-coding.
This assumes that "pages with no durable column" and "pages with no Quicksand" are the same, but that's correct today and I can't come up with a use case where they'd be different offhand.
Test Plan:
- Clicked a revision with column open, got Quicksand navigation.
- Clicked into Conpherence with column open, got real navigation.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7060
Differential Revision: https://secure.phabricator.com/D12036
Summary: Ref T7380. This does the most basic thing ever and sticks up to 6 icons in there.
Test Plan: clicked the icons and noted new conpherences loaded in nicely
Reviewers: epriestley, chad
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7380
Differential Revision: https://secure.phabricator.com/D12037
Summary:
Ref T5369. New HTML5 version without flash dependencies.
This doesn't play any sounds.
Test Plan: Did not play any sounds.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: joshuaspence, epriestley
Maniphest Tasks: T5369
Differential Revision: https://secure.phabricator.com/D9535
Summary: Ref T7014. The main conpherence view is kind of broken without this in subtle ways because of /conpherence/ versus /conpherence/x/ init'ing things differently; this fixes that. Moves more normal view conpherence logic into threadManager. Makes all the display code happen outside of threadManager, setting us up for some display manager later maybe.
Test Plan: sent messages, updated title, etc and the messages pane auto scrolled correctly!
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7014
Differential Revision: https://secure.phabricator.com/D12035
Summary:
Ref T7014. Fixes T7473. This adds a class to handle thread state about what thread is loaded and what transaction we've seen last. It is deployed 100% in the durable column and only partially deployed in the regular view. Future diff(s) should clean up regular view. Note ConpherenceThreadManager API might change a bit at that time.
Also includes a bonus bug fix so logged out users can't toggle this column
Test Plan: tried to use durable column while logged out and nothing happened. sent messages, aphlict-received messages, added people, and changed title from both views
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7473, T7014
Differential Revision: https://secure.phabricator.com/D12029
Summary:
Ref T2009. Ref T1460.
Fixes T2618. When users hit "Delete" on inline comments, delete immediately and offer them "Undo". If they delete indirectly (e.g., by clicking "Delete" from the preview at the bottom of the page), we still prompt them, because the "Undo" action either won't be available or may not be easy to find. This is a "refdelete".
Fixes T6464. This was just a mess. Make it not as much of a mess. It should work now. Pretty sure.
Fixes T4999. We did not refresh these links often enough to find targets for them, so they could race with content. Reevaluate them after loading new changes.
Test Plan:
- Deleted and undid deletion of inlines from main view and preview.
- Clicked "View" on inlines.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6464, T4999, T2618, T1460, T2009
Differential Revision: https://secure.phabricator.com/D12032
Summary:
Ref T2009. Ref T1460. The way Diffusion and Differential load inlines is horrible garbage right now:
- Differential does an ad-hoc query to get the PHIDs, then does a real load to policy check.
- Diffusion completely fakes things. In practice this is not a policy violation, but it's dangerous.
Make TransactionCommentQuery extensible so we can subclass it and get the query building correctly in the right Query layer.
Specifically, the Diffusion and Differential subclasses of this Query will add appropriate `withX()` methods to let us express the query in SQL.
Test Plan: Loaded, previewed, edited, and submitted inlines in Differential and Diffusion
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009, T1460
Differential Revision: https://secure.phabricator.com/D12026
Summary:
Ref T1460. Ref T2618.
When publishing a draft inline, mark the inline it replies to (if any) as replied to.
Also, don't load deleted comments as drafts (sets the stage for T2618).
I'll make an effort to clean up the loading mess here in the next revision, and find some more appropriate home for the shared code.
Test Plan: Made and replied to comments in Differential and Diffusion. Saw comments get marked as "Has Replies" and "Is Reply".
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2618, T1460
Differential Revision: https://secure.phabricator.com/D12025
Summary: We respect this when adding inputs to the form, but not when guarding the actual fetch.
Test Plan: Reading
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D12030
Summary: Ref T2009. These subclasses have a mixture of similar methods, move them all to the base class.
Test Plan: Created/edited/undo/submitted comments on the left and right sides of a diff.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D12024
Summary: Ref T7014.
Test Plan: changed the conpherence title from the column. since i can't get scrolling to work, i inspect the dom to verify the title change transaction showed up properly
Reviewers: epriestley, chad
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7014
Differential Revision: https://secure.phabricator.com/D12002
Summary:
Ref T2009. This is another almost-identical copy of the row scaffolding, which has the same 1up/2up bugs as the 8 other copies of this code.
Turn the "undo" element into an InlineCommentView so we can scaffold it.
Then, scaffold it with the same code as everything else.
Test Plan: Hit "Undo", swapped from 1up to 2up, hit "undo" again, swapped back, tried left/right, everything rendered with proper scaffolding.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D12019
Summary: Ref T2009. This has two more copies of the scaffolding.
Test Plan: Created, edited, deleted, replied to inline comments.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D12018
Summary:
Ref T1460. Track and store which comments are threaded replies to other comments, vs merely appearing on the same lines.
This doesn't actually write `hasReplies` yet, since that needs to happen when we un-draft comments on submission.
Test Plan: Made inline comments in Differential and Diffusion, including replies. Replies were marked as "Is Reply".
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1460
Differential Revision: https://secure.phabricator.com/D12017
Summary: Ref T2009. Upgrade this from DetailView to ListView so we get "Highlight As", "View Unified", etc., and respect the unified diff prefernce.
Test Plan: Viewed diffs in Phriction.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D12013
Summary:
Fixes T4452. Ref T2009. There's a hierarchy of changeset rendering power: only low-level calls, use of ChangesetDetailView, then use of ChangesetListView (a list of DetailViews).
Prior to work here, the various changeset rendering controllers got their hands dirty to varying degrees, with some using only the lowest-level rendering pipeline:
- Phriction: no view (lowest level)
- Diffusion: DetailView
- Differential Changeset: DetailView
- Differential Diff: ListView
- Differential Revision: ListView
I brought Phriction up to use DetailView, but want to bring everything all the way up to use ListView. Each composition layer adds more features to diff browsing. In particular, this change enables "Highlight As", switching 1up vs 2up, adding inlines, etc., on the standalone view.
Test Plan:
- Viewed a changeset standalone. Could change highlighting, switch 1up vs 2up, add and edit inlines, etc.
- Viewed a revision; no behavioral changes.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4452, T2009
Differential Revision: https://secure.phabricator.com/D12012
Summary: Fixes T7496, T7511. Sets text for registration is not enabled, sets can_manage on add_provider button.
Test Plan: Test with a logged in admin and logged in normal joe user.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7496, T7511
Differential Revision: https://secure.phabricator.com/D12014
Summary:
Ref T2009. Currently, the code figures out if a comment is on the left or right by looking at the `<th />` preceeding the enclosing `<td />`.
This gets the right result in 2-up, but in 1-up rows are always `<th />`, `<th />`, `<td />`, so it always detects every inline as being in the new file.
Because "old" and "new" cells aren't inherently distingushable in the 1up view, we can't use a DOM test for this at all. Instead, just track this state explicitly.
Test Plan:
- Made left/right comments in 1up view and 2up view.
- Viewed them in 1up and 2up views.
- Hovered in 1up and 2up views.
- Diff-of-diff'd and reviewed old/new comments, then made some more.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D12011
Summary:
The "mlb" on the left nav creates a phantom bottom margin which gives the content measurable height but not scrollable height. Replace it with "plb" (padding) instead.
The 2px-spacer calculation was also not quite correct.
Test Plan:
- Viewed pages with navs; padding vs margin didn't seem to make any other differences.
- Scrollbar now stops in the right place in Safari, Chrome, Firefox.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D12007
Summary: Renames the method in PHUIObjectBoxView to match the new PHUIInfoView class.
Test Plan: grepped codebase. Went to Calendar and tried a new status.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D12005
Summary: Removes AphrontPanelView, and most of it's CSS - it seems some old previews still call it.
Test Plan: grep for AphrontPanelView, no callsites left. Verify CSS left is minimal needed.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7427
Differential Revision: https://secure.phabricator.com/D12004
Summary: Ref T2009. Still a touch glitch-ish but essentially functional now.
Test Plan: Viewed image diffs in 1up and 2up views. Made inline comments on them.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D12003
Summary: Ref T2009. Remove the 4 (!!) copies of this code.
Test Plan:
- Added, edited, and removed inline comments in 2up view.
- Stacked a bunch of comments on the same line and saw the JS place them correctly.
- Created an image diff and added, edited and removed inlines on it.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D12000
Summary: Ref T2009. This can now be removed.
Test Plan: Added, edited and deleted an inline comment in 1up view.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11998
Summary:
Ref T2009. Inline comments have "scaffolding", which is basically some empty table cells/rows around them to get the layout correct.
The scaffolding depends on the renderer, since the cells are different for side-by-side vs unified diffs.
This is currently duplicated all over the place:
- Edit view has 1up/2up.
- Detail view has 1up/2up.
- 1up renderer has 1up.
- 2up renderer has four separate copies of the 2up logic.
These all have subtle differences, which are mostly bugs. Start making the scaffolding more composable so we can get rid of that mess.
Test Plan: Added, edited, and removed inline comments on unified and side-by-side diffs.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11997
Summary:
Ref T2009. These classes are "Differential" now, but are used elsewhere in diff infrastructure (e.g., Diffusion).
- Rename them to "PHUIDiff".
- Move them to "src/infrastructure/".
- Give them a base class.
Test Plan: Interacted with inlines in unified and side-by-side views.
Reviewers: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11996
Summary:
Ref T2009. This tweaks things a bit more to improve consecuitive groups of added and removed lines.
Generally, it gives us "old, old, old, new, new, new" intead of "old, new, old, new, old, new".
Feelin' real good about having unit tests for this stuff.
Test Plan: Unit tests, looked at diffs in web UI.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11994
Summary: Uses standard sidenav width, more spacing in labels, added background around textarea, make background work in Firefox.
Test Plan:
Test Desktop, Mobile, and Tablet break points. Test Firefox and Chrome.
{F331201}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11993
Summary: This improves some cases with interleaved added and removed lines, and adds test coverage.
Test Plan:
- Added and executed unit tests.
- Viewed raw diff and saw sensible/expected output.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11992
Summary:
Ref T7014. This diff addresses
- getting it to be the right set of options
- add participant
- view in conpherence
- close window
- making those options work
- make it so if you are on /conpherence/ you can't toggle the durable column
Test Plan: inspected dom via chrome tools and found last transaction. added a participant and inspected the single new transactin added for accuracy. used view in conpherence action to view in conpherence. used close window action to close window
Reviewers: chad, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7014
Differential Revision: https://secure.phabricator.com/D11991
Summary:
Ref T2009. This reduces how buggy inlines are. They're still buggy.
Specifically, the inline endpoint didn't know how to scaffold inlines before, so some of them ended up rendering in the wrong rows or breaking layouts.
This passes the current renderer through to the inline editor endpoint, so it can at least get the layout correct.
Test Plan: Interacted with inlines in unified and side-by-side views.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11988
Summary:
These aren't being populated yet; they mostly fix some JS errors with inlines.
For example, the inline hover reticle relies on adjusting its width to account for the "copy" column, and failed when the column did not exist.
Test Plan:
- Hovering inlines in unified now works, mostly.
- Interacted with inlines in side-by-side.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11985
Summary: Ref T2009. Unchanged lines should always go above inlines; we get nonsense results otherwise.
Test Plan: Inline now shows in correct place in unified view.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11987
Summary:
Ref T2009. Currently, lines don't get their "C123NL456" IDs set in the unified view. This is the major way that inlines are glued to changesets.
Simplify this rendering and bring it into the HTML renderer, then use it in the OneUp renderer.
Test Plan:
- Interacted with side-by-side inlines (hovered, added, edited, deleted), saw unchanged behavior.
- Interacted with unified inlines. They still don't work, but the error that breaks them is deeper in the stack.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11983
Summary: Ref T2009. I've clicked these links like 200 times in testing now, so I'm feeling pretty good about them.
Test Plan: Viewed links in side-by-side diff, clicked them.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11981
Summary: Ref T2009. It doesn't make sense to have these as separate behaviors. We require a ChangesetViewManager to track view parameter state.
Test Plan: Interacted with changesets in Phriction, Differential and Diffusion.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11979
Summary:
Ref T2009. Currently, we do not persist view parameters when making context rendering requests.
The big one is the renderer (1up vs 2up). This makes context on unified diffs come in with too many columns.
However, it impacts other parameters too. For example, at HEAD, if you change highlighting to "rainbow" and then load more context, the context uses the original highlighter instead of the rainbow highlighter.
This moves context loads into ChangesetViewManager, which maintains view parameters and can provide them correctly.
- This removes "ref"; it is no longer required, as the ChangesetViewManager tracks it.
- This removes URI management from `behavior-show-more`; it is no longer required, since the ChangesetViewManager knows how to render.
- This removes "whitespace" since this is handled properly by the view manager.
Test Plan:
- Used "Show Top" / "Show All" / "Show Bottom" in 1-up and 2-up views.
- Changed file highlighting to rainbow, loaded stuff, saw rainbow stick.
- Used "Show Entire File" in 1-up and 2-up views.
- Saw loading chrome.
- No loading chrome normally.
- Made inlines, verified `copyRows()` code runs.
- Poked around Diffusion -- it is missing some parameter handling, but works OK.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11977
Summary:
Ref T2009. This clears the stage for D11977.
Specifically, D11977 moves "show context" logic into ChangesetViewManager, but those objects won't exist if we don't run "behavior-populate" first.
Generally, this increases consistency across changeset views -- which is still very low overall, but getting slightly better.
Both of these should probably move up more and use ChangesetListView, but we don't need to do that quite yet.
Test Plan:
- Took changeset actions in Phriction diff view.
- Took changeset actions in Differential standalone view.
- Took changeset actions in normal Differential view.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11978
Summary:
Ref T2009. This basically copy/pastes them for now. Plans is:
- Make this actually work all the way.
- Add test coverage after D11970.
- Move 2-up here after test coverage.
Clicking the links does not work yet, because they use the 2-up renderer. I'll fix this in the next diff.
Test Plan: Viewed diffs in unified, saw links to show more.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: chad, epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11976
Summary: Ref T2009. Remove forced min-width of 780px in 1-up mode, and tweak a few other things to look better.
Test Plan: Looks better on mobile.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11974
Summary: Ref T2009. These aren't good enough to actually use so I won't land this yet, but it makes testing changes a lot easier.
Test Plan:
- Swapped setting.
- Loaded revisions.
- Saw setting respected.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11972
Summary:
See D11468 and D11465. Fixes T5163. Fixes T4105. This makes it practical to test shields, unshielding, moves, etc.
This fixes the issue in D11468, where line maps from whitespace-ignored hunks could have fewer lines than line maps from whitespace-respected hunks, causing a warning.
This encodes the behavior which D11465 changed, making it the canon behavior. Specifically, we do **not** show a shield. I think this is correct. It seems misleading to show "the contents of this file were not changed", because they were changed in both the sense that the file was completely removed, and also changed in the sense that the content itself was (or may have been) changed at the destination. Instead, we just show nothing.
Test Plan:
- Added test coverage.
- Ran tests.
- Used `arc diff --raw --browse` to verify that web behavior was consistent with CLI/test behavior.
Reviewers: joshuaspence, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4105, T5163
Differential Revision: https://secure.phabricator.com/D11970
Summary: This ended up having a different signature; the discrepancy can cause a warning.
Test Plan: No more warning.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11971
Summary:
Ref T7014. This hooks up the durable column such that when you open it up it loads your most recent Conpherence. You can then switch amongst the various widgets and stuff and everything works nicely.
Except...
- scroll bar does not work
- also doesn't work at HEAD when I add a ton of text to the UI with no changes? (wrapped $copy in array_fill(0, 1000, $copy))
- "widget selector" does not collapse when you select something else
- this part wasn't really specified so I used the aphlict dropdown stuff. didn't want to keep working on that if this was the wrong UI choice
- can not edit title
- do we still want that to be done by clicking on the title, which pops a dialogue?
- can not add participants or calendar events
- what should this UI be? maybe just a button on the top for "participants" and a button on the bottom for calendar? both on top?
- this is not pixel perfect to the mock or two I've seen around. Aside from generally being bad at that, I definitely didn't get the name + timestamps formatting correctly, because the standard DOM of that has timestamp FIRST which appears second due to a "float right". Seemed like a lot of special-casing for what might not even be that important in the UI so I punted. (And again, there's likely many unknown ways in which this isn't pixel perfect)
There's also code quality issues
- `ConpherenceWidgetConfigConstants` is hopefully temporary or at least gets more sleek as we keep progressing here
- copied some CSS from main Conpherence app
- DOM structure is pretty different
- there's some minor CSS tweaks too given the different width (not to mention the DOM structure being different)
- copied some JS from behavior-pontificate.js to sync threads relative to aphlict updates
- JS in general is like a better version of existing JS; these should collapse I'd hope?
- maybe the aphlict-behavior-dropdown change was badsauce?
...but all that said, this definitely feels really nice and I feel like adding stuff is going to be really easy compared to how normal Conpherence is.
Also includes a bonus bug fix - we now correctly update participation. The user would encounter this issue if they were in a conpherence that got some updates and then they went to a different page; they would have unread status for the messages that were ajax'd in. This patch fixes that by making sure we mark participation up to date with the proper transaction in all cases.
Test Plan: hit "\" to invoke the column and saw nice loading UI and my latest conpherence load. sent messages and verified they received A-OK by looking in DOM console. toggled various widges and verified they rendered correctly. opened up a second browser with a second user on the thread, sent a message, and it was received in a nice asynchronous fashion
Reviewers: chad, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7014
Differential Revision: https://secure.phabricator.com/D11968
Summary: Switch to modern components, crumbs, pht, object boxes.
Test Plan:
Test browsing a list, click edit, click new repository, click delete, verify all work as expected.
{F330864}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7427
Differential Revision: https://secure.phabricator.com/D11984
Summary: Makes this just a plain box (we don't have UI for table-in-form just yet).
Test Plan: Faked some connection data to view the display.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7427
Differential Revision: https://secure.phabricator.com/D11982
Summary: Pass this as true when building XHProf pages
Test Plan: Verify setDeviceReady exists in class PhabricatorBarePageView
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11980
Summary: The participant list can sometimes be `null`, which fails when we try to `array_fuse()` it.
Test Plan: Created a new thread cleanly.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11969
Summary:
Ref T6516. Although this behavior is somewhat-arguable as desirable, I think it's less surprising and more consistent to disable mentions when a repository is publishing.
In particular, if you import a repository developed on another Phabricator install, this stops all the `T123` in commit messages from creating mentions on your unrelated `T123` tasks.
We already disable autoclose, so `Closes T123` and `Ref T123` already have no effect, but a bare `T123` would generate a mention. Likewise, `@epriestley` would generate a mention.
If you import such a repository and then update it periodically, updates will activate autoclose and publishing (if you didn't disable them), but presumably this will hit a couple of tasks and you'll go change the settings if you forgot.
At some point, we may have some kind of use case for separating the "publish" setting into a "publish" setting and a "this is a local repository" setting. For example, if you work at Widget Corp, want to import Phabricator locally, //and// want to write Herald rules against it, you can't currently configure the repository to let you do all of this. But we haven't actually seen a use case for this yet.
Test Plan:
- Pushed some commits with bare `T11`, saw mentions.
- Disabled publishing for the repository, pushed some commits with
- Imported a bunch of commits without seeing pipeline failures.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6516
Differential Revision: https://secure.phabricator.com/D11966
Summary: Ref T4214. Reduce the need for installs to purge caches.
Test Plan:
{F329350}
- Changed header twice.
- New one showed up without dirtying cache.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4214
Differential Revision: https://secure.phabricator.com/D11965
Summary: Ref T6516. We incorrectly fail to set this flag on repositories created via Conduit, which activates too many actions on old commits.
Test Plan:
- Created a new repository via Conduit, verified it was "importing" after creation.
- Created a new repostiory via web UI, verified it was "importing" after creation.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6516
Differential Revision: https://secure.phabricator.com/D11964
