Summary: This adds a handful of 'Main Header' colors to change the look of Phabricator very slightly. I know I would probably set my dev header to a different color.
Test Plan: Tested each css class and color, can add more in the future.
Reviewers: epriestley, btrahan
Reviewed By: btrahan
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7731
Summary: Ref T4195. Stores remote address and protocol in the logs, where possible.
Test Plan: Pushed some stuff, looked at the log, saw data.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7711
Summary: Ref T4189. Fixes T2066. Mercurial has a //lot// of hooks so I'm not 100% sure this is all we need to install (we may need separate hooks for tags/bookmarks) but it should cover most of what we're after at least.
Test Plan:
- `bin/repository pull`'d a Mercurial repo and got a hook install.
- Pushed to a Mercurial repository over SSH and HTTP, with good/bad hooks. Saw hooks fire.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2066, T4189
Differential Revision: https://secure.phabricator.com/D7685
Summary:
Ref T4189. This adds SVN support, which was a little more messy than I though. Principally, we can not use `PHABRICATOR_USER` for Subversion, because it strips away the entire environment for "security reasons".
Instead, use `--tunnel-user` plus `svnlook author` to figure out the author.
Also fix "ssh://" clone URIs, which needs to be "svn+ssh://".
Test Plan:
- Made SVN commits through the hook.
- Made Git commits, too, to make sure I didn't break anything.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4189
Differential Revision: https://secure.phabricator.com/D7683
Summary:
Ref T4189. T4189 describes most of the intent here:
- When updating hosted repositories, sync a pre-commit hook into them instead of doing a `git fetch`.
- The hook calls into Phabricator. The acting Phabricator user is sent via PHABRICATOR_USER in the environment. The active repository is sent via CLI.
- The hook doesn't do anything useful yet; it just veifies basic parameters, does a little parsing, and exits 0 to allow the commit.
Test Plan:
- Performed Git pushes and pulls over SSH and HTTP.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4189
Differential Revision: https://secure.phabricator.com/D7682
Summary:
The documentation is explicit that Git does not pass this flag:
The $GIT_SSH command will be given exactly two arguments: the username@host (or just host) from the URL and the shell command to execute on that remote system.
This isn't true; it does. Accommodate it.
I'll see if I can fix this in the upstream, too.
Test Plan: Ran various `ssh-connect` commands with -p, etc.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7680
Summary: The "easy setup" is sort of an exaggeration since it basically just amounts to getting you logged in correctly, but it will probably be more true in the future.
Test Plan: Ran `bin/accountadmin` with zero and more than zero accounts.
Reviewers: asherkin, btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7678
Summary: Some oldschool users create accounts via bin/accountadmin, which
messes up the first-time setup process. Auto-approve these accounts, as this
better aligns with user expectation.
Auditors: btrahan
Summary: If no ssh keys are in phabricator, bin/ssh-auth errors with undefined `$lines`. This fixes that case and explicitly tells the user no rows were found.
Test Plan: Ran bin/ssh-auth before and after change with no ssh keys in the system. Error goes away after change.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: epriestley
CC: epriestley, aran, Korvin
Differential Revision: https://secure.phabricator.com/D7675
Summary: Fixes T2230. This isn't a total walk in the park to configure, but should work for early adopters now.
Test Plan: Read documentation, browsed UI.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7634
Summary: Fixes T4122. Ref T2230. Instead of storing credentials on each repository, store them in Passphrase. This allows easy creation/management of many repositories which share credentials.
Test Plan:
- Upgraded repositories.
- Created and edited repositories.
- Pulled HTTP and SSH repositories.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230, T4122
Differential Revision: https://secure.phabricator.com/D7629
Summary:
This adds a Drydock blueprint for preallocated, remote hosts. This will be used by the Harbormaster interface to allow users to specify remote hosts that builds can be run on.
This adds a `canAllocateResource` method to Drydock blueprints; it is used to detect whether a blueprint can allocate a resource for the given type and attributes.
Test Plan:
Ran:
```
bin/drydock lease --type host --attributes remote=true,preallocated=true,host=192.168.56.101,port=22,user=james,keyfile=,path=C:\\Build\\,platform=windows
```
and saw the "C:\Build\<id>" folder appear on the remote Windows machine. Viewed the lease and resource in Drydock as well.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran, jamesr
Maniphest Tasks: T4111
Differential Revision: https://secure.phabricator.com/D7593
Summary:
This cleans up some garbage:
- We were specifying environmental variables with `X=y git ...`, but now have `setEnv()` on both `ExecFuture` and `PhutilExecPassthru`. Use `setEnv()`.
- We were specifying the working directory with `(cd %s && git ...)`, but now have `setCWD()` on both `ExecFuture` and `PhutilExecPassthru`. Use `setCWD()`.
- We were specifying the Git credentials with `ssh-agent -c (ssh-add ... && git ...)`. We can do this more cleanly with `GIT_SSH`. Use `GIT_SSH`.
- Since we have to write a script for `GIT_SSH` anyway, use the same script for Subversion and Mercurial.
This fixes two specific issues:
- Previously, we were not able to set `-o StrictHostKeyChecking=no` on Git commands, so the first time you cloned a git repo the daemons would generally prompt you to add `github.com` or whatever to `known_hosts`. Since this was non-interactive, things would mysteriously hang, in effect. With `GIT_SSH`, we can specify the flag, reducing the number of ways things can go wrong.
- This adds `LANG=C`, which probably (?) forces the language to English for all commands. Apparently you need to install special language packs or something, so I don't know that this actually works, but at least two users with non-English languages have claimed it does (see <https://github.com/facebook/arcanist/pull/114> for a similar issue in Arcanist).
At some point in the future I might want to combine the Arcanist code for command execution with the Phabricator code for command execution (they share some stuff like LANG and HGPLAIN). However, credential management is kind of messy, so I'm adopting a "wait and see" approach for now. I expect to split this at least somewhat in the future, for Drydock/Automerge if nothing else.
Also I'm not sure if we use the passthru stuff at all anymore, I may just be able to delete that. I'll check in a future diff.
Test Plan: Browsed and pulled Git, Subversion and Mercurial repositories.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7600
Summary: Fixed a small bug that caused the catch-all commit to purge previously added symbols in that session.
Test Plan: Re-ran the script, observed corrected behavior.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4117
Differential Revision: https://secure.phabricator.com/D7597
Summary:
Modified the import script so it will only try to load a configurable
number of symbols at a time to avoid exhausting memory for large project
imports.
I haven't written a line of PHP in more than a decade, so please forgive
any stylistic or technical errors.
Test Plan: Ran the script on symbol table generated from linux kernel.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4117
Differential Revision: https://secure.phabricator.com/D7596
Summary:
Ref T4039. This is mostly to deal with that, to prevent the security issues associated with mutable local paths. The next diff will lock them in the web UI.
I also added a confirmation prompt to `bin/repository delete`, which was a little scary without one.
See one comment inline about the `--as` flag. I don't love this, but when I started adding all the stuff we'd need to let this transaction show up as "Administrator" it quickly got pretty big.
Test Plan: Ran `bin/repository edit ...`, saw an edit with a transaction show up on the web UI.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4039
Differential Revision: https://secure.phabricator.com/D7579
Summary:
- Add an option for the queue.
- By default, enable it.
- Dump new users into the queue.
- Send admins an email to approve them.
Test Plan:
- Registered new accounts with queue on and off.
- As an admin, approved accounts and disabled the queue from email.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7576
Summary:
Small step forward which improves existing stuff or lays groudwork for future stuff:
- Currently, to check for email verification, we have to single-query the email address on every page. Instead, denoramlize it into the user object.
- Migrate all the existing users.
- When the user verifies an email, mark them as `isEmailVerified` if the email is their primary email.
- Just make the checks look at the `isEmailVerified` field.
- Add a new check, `isUserActivated()`, to cover email-verified plus disabled. Currently, a non-verified-but-not-disabled user could theoretically use Conduit over SSH, if anyone deployed it. Tighten that up.
- Add an `isApproved` flag, which is always true for now. In a future diff, I want to add a default-on admin approval queue for new accounts, to prevent configuration mistakes. The way it will work is:
- When the queue is enabled, registering users are created with `isApproved = false`.
- Admins are sent an email, "[Phabricator] New User Approval (alincoln)", telling them that a new user is waiting for approval.
- They go to the web UI and approve the user.
- Manually-created accounts are auto-approved.
- The email will have instructions for disabling the queue.
I think this queue will be helpful for new installs and give them peace of mind, and when you go to disable it we have a better opportunity to warn you about exactly what that means.
Generally, I want to improve the default safety of registration, since if you just blindly coast through the path of least resistance right now your install ends up pretty open, and realistically few installs are on VPNs.
Test Plan:
- Ran migration, verified `isEmailVerified` populated correctly.
- Created a new user, checked DB for verified (not verified).
- Verified, checked DB (now verified).
- Used Conduit, People, Diffusion.
Reviewers: btrahan
Reviewed By: btrahan
CC: chad, aran
Differential Revision: https://secure.phabricator.com/D7572
Summary:
Ref T2230. The SVN protocol has a sensible protocol format with a good spec here:
http://svn.apache.org/repos/asf/subversion/trunk/subversion/libsvn_ra_svn/protocol
Particularly, compare this statement to the clown show that is the Mercurial wire protocol:
> It is possible to parse an item without knowing its type in advance.
WHAT A REASONABLE STATEMENT TO BE ABLE TO MAKE ABOUT A WIRE PROTOCOL
Although it makes substantially more sense than Mercurial, it's much heavier-weight than the Git or Mercurial protocols, since it isn't distributed.
It's also not possible to figure out if a request is a write request (or even which repository it is against) without proxying some of the protocol frames. Finally, several protocol commands embed repository URLs, and we need to reach into the protocol and translate them.
Test Plan: Ran various SVN commands over SSH (`svn log`, `svn up`, `svn commit`, etc).
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7556
Summary:
Ref T2230. This is substantially more complicated than Git, but mostly because Mercurial's protocol is a like 50 ad-hoc extensions cobbled together. Because we must decode protocol frames in order to determine if a request is read or write, 90% of this is implementing a stream parser for the protocol.
Mercurial's own parser is simpler, but relies on blocking reads. Since we don't even have methods for blocking reads right now and keeping the whole thing non-blocking is conceptually better, I made the parser nonblocking. It ends up being a lot of stuff. I made an effort to cover it reasonably well with unit tests, and to make sure we fail closed (i.e., reject requests) if there are any parts of the protocol I got wrong.
A lot of the complexity is sharable with the HTTP stuff, so it ends up being not-so-bad, just very hard to verify by inspection as clearly correct.
Test Plan:
- Ran `hg clone` over SSH.
- Ran `hg fetch` over SSH.
- Ran `hg push` over SSH, to a read-only repo (error) and a read-write repo (success).
Reviewers: btrahan, asherkin
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7553
Summary: This is kind of a quick hack to make symbol lookup work for C#. ctags calls C# 'csharp', while pygments recognises it as 'cs' (or at least, I have to put 'cs' in the Arcanist indexed languages for the clickables to appear, while it's 'csharp' in the symbol database).
Test Plan: Tested this in my live install and it makes symbol lookup work.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7497
Summary: Ref T4068. Adds a command to list all commits in an "importing" status. This will allow users to use `reparse.php` to diagnose and repair issues.
Test Plan:
- Ran `bin/repository importing P`, etc.
- Used `reparse.php` to reparse some commit stages and saw status update correctly.
- Ran on a repo with no importing commits.
- Ran with `... --simple | xargs`, which saves us having to put an `awk` or something in there for users.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4068
Differential Revision: https://secure.phabricator.com/D7515
Summary:
Ref T4068. In some cases like that one, I anticipate a repository not fully importing when a handful of random commits are broken. In the long run we should just deal with that properly, but in the meantime provide an administrative escape hatch so you can mark the repository as imported and get it running normally.
The major reason to do this is that Herald, Feed, Harbormaster, etc., won't activate until a repository is "imported".
Test Plan:
- Tried to mark an imported repository as imported, got an "already imported" message.
- Same for not-imported.
- Marked a repository not-imported.
- Marked a repository imported.
- Marked a repository not-imported, then waited for the daemons to mark it imported again automatically.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, kbrownlees
Maniphest Tasks: T4068
Differential Revision: https://secure.phabricator.com/D7514
Summary: Looks like this is pretty straightforward; same as the reads except mark it as needing PUSH.
Test Plan: Ran `git push`, pushed over SSH to a hosted repo.
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7425
Summary:
- Add web UI for configuring SSH hosting.
- Route git reads (`git-upload-pack` over SSH).
Test Plan:
>>> orbital ~ $ git clone ssh://127.0.0.1/
Cloning into '127.0.0.1'...
Exception: Unrecognized repository path "/". Expected a path like "/diffusion/X/".
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
>>> orbital ~ $ git clone ssh://127.0.0.1/diffusion/X/
Cloning into 'X'...
Exception: No repository "X" exists!
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
>>> orbital ~ $ git clone ssh://127.0.0.1/diffusion/MT/
Cloning into 'MT'...
Exception: This repository is not available over SSH.
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
>>> orbital ~ $ git clone ssh://127.0.0.1/diffusion/P/
Cloning into 'P'...
Exception: TODO: Implement serve over SSH.
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7421
Summary:
Fixes T2229. This sets the stage for a patch similar to D7417, but for SSH. In particular, SSH 6.2 introduced an `AuthorizedKeysCommand` directive, which lets us do this in a mostly-reasonable way without needing users to patch sshd (if they have a recent enough version, at least).
The way the `AuthorizedKeysCommand` works is that it gets run and produces an `authorized_keys`-style file fragment. This isn't ideal, because we have to dump every key into the result, but should be fine for most installs. The earlier patch against `sshd` passes the public key itself, which allows the script to just look up the key. We might use this eventually, since it can scale much better, so I haven't removed it.
Generally, auth is split into two scripts now which mostly do the same thing:
- `ssh-auth` is the AuthorizedKeysCommand auth, which takes nothing and dumps the whole keyfile.
- `ssh-auth-key` is the slightly cleaner and more scalable (but patch-dependent) version, which takes the public key and dumps only matching options.
I also reworked the argument parsing to be a bit more sane.
Test Plan:
This is somewhat-intentionally a bit obtuse since I don't really want anyone using it yet, but basically:
- Copy `phabricator-ssh-hook.sh` to somewhere like `/usr/libexec/openssh/`, chown it `root` and chmod it `500`.
- This script should probably also do a username check in the future.
- Create a copy of `sshd_config` and fix the paths/etc. Point the KeyScript at your copy of the hook.
- Start a copy of sshd (6.2 or newer) with `-f <your config file>` and maybe `-d -d -d` to foreground and debug.
- Run `ssh -p 2222 localhost` or similar.
Specifically, I did this setup and then ran a bunch of commands like:
- `ssh host` (denied, no command)
- `ssh host ls` (denied, not supported)
- `echo '{}' | ssh host conduit conduit.ping` (works)
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Maniphest Tasks: T2229, T2230
Differential Revision: https://secure.phabricator.com/D7419
Summary: A set of random icons for use as project identifiers. 42, white.
Test Plan: photoshop, epriestley
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7290
Summary: This builds out and implements PHUIPropertyListView (container) and PHUIPropertyListItemView (section) as well as adding tabs.
Test Plan: Tested each page I edited with the exception of Releeph and Phortune, though those changes look ok to me diff wise. Updated examples page with tabs.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7283
Summary: Ref T603. We might need a fine-grained CLI tool later on, but here's a bat we can bludgeon things with.
Test Plan:
- Ran `bin/policy unlock D12` (adjusted policies).
- Ran `bin/policy unlock rPca85c457ebcb` (got "not mutable" stuff).
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7189
Summary:
Ref T603. I want to provide at least a basic CLI tool for fixing policy problems, since there are various ways users can lock themselves out of objects right now. Although I imagine we'll solve most of them in the application eventually, having a workaround in the meantime will probably make support a lot easier.
This implements `bin/policy show <object>`, which shows an object's policy settings. In a future diff, I'll implement something like `bin/policy set --capability view --policy users <object>`, although maybe just `bin/policy unlock <object>` (which sets view and edit to "all users") would be better for now. Whichever way we go, it will be some blanket answer to people showing up in IRC having locked themselves out of objects which unblocks them while we work on preventing the issue in the first place.
Test Plan: See screenshot.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7171
Summary: Add a couple more resources that we need on most pages.
Test Plan: Regenerated resources, viewed homepage.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7155
Summary: The adds the ability to set 'properties' such as state, privacy, due date to the header of objects.
Test Plan: Implemented in Paste, Pholio. Tested various states.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D7016
Summary: Adds plain support for object lists that just look like lists
Test Plan: review UIexamples and a number of other applications
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D6922
Summary:
This attempts some consistency in form layouts. Notably, they all now contain headers and are 16px off the sides and tops of pages. Also updated dialogs to the same look and feel. I think I got 98% of forms with this pass, but it's likely I missed some buried somewhere.
TODO: will take another pass as consolidating these colors and new gradients in another diff.
Test Plan: Played in my sandbox all week. Please play with it too and let me know how they feel.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D6806
Summary: Fixes T3679. This comes up every so often and the old script is extremely broad (nuke everything in a repository). Provide a more surgical tool.
Test Plan: Ran a bunch of variations of the script and they all seemed to work OK.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, staticshock
Maniphest Tasks: T3679
Differential Revision: https://secure.phabricator.com/D6678
Summary: Ref T3557. Make it easier to access full daemon logs from the CLI.
Test Plan: {F51265}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3557
Differential Revision: https://secure.phabricator.com/D6547
Summary:
Ref T1670. Prepare for the overseers to talk directly to the database instead of using Conduit. See T1670 for discussion.
This shouldn't impact anything, except it has a very small chance of destabilizing the overseers.
Test Plan:
Ran `phd launch`, `phd debug`, `phd start`.
Ran with `--trace-memory` and verified elevated but mostly steady memory usage (8MB / overseer). This climbed by 0.05KB / sec (4MB / day) but the source of the leaks seems to be the cURL calls we're making over Conduit so this will actually fix that. Disabling `--conduit-uri` reported steady memory usage. I wasn't able to identify anything leaking within code we control. This may be something like a dynamic but capped buffer in cURL, since we haven't seen any issues in the wild.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1670
Differential Revision: https://secure.phabricator.com/D6534
Summary:
Ref T1670. Mostly, use PhutilArgumentParser. This breaks up the mismash of functional stuff and PhabriatorDaemonControl into proper argumentparser Workflows.
There are no functional changes, except that I removed the "pingConduit()" call prior to starting daemons, because I intend to remove all Conduit integration.
Test Plan:
- Ran `phd list`.
- Ran `phd status` (running daemons).
- Ran `phd status` (no running daemons).
- Ran `phd stop <pid>` (dead task).
- Ran `phd stop <pid>` (live task).
- Ran `phd stop zebra` (invalid PID).
- Ran `phd stop 1` (bad PID).
- Ran `phd stop`.
- Ran `phd debug zebra` (no match).
- Ran `phd debug e` (ambiguous).
- Ran `phd debug task`.
- Ran `phd launch task`.
- Ran `phd launch 0 task` (invalid arg).
- Ran `phd launch 2 task`.
- Ran `phd help`.
- Ran `phd help list`.
- Ran `phd start`.
- Ran `phd restart`.
- Looked at Repositories (daemon running).
- Looked at Repositories (daemon not running).
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1670
Differential Revision: https://secure.phabricator.com/D6490
Summary: Fixes T3553. Did it by adding some code that refreshes the File object on keyup events within a given file entry. also fixes an html derp I found trying to fix this.
Test Plan: added cool things like 'bbb' to every field and noted they were maintained when I added more files
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, Korvin, chad
Maniphest Tasks: T3553
Differential Revision: https://secure.phabricator.com/D6488
Summary: Status icons for next to people names
Test Plan: photoshop
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2064
Differential Revision: https://secure.phabricator.com/D6479
