Summary: Ref T4375. We never join this table, so this is a pretty straight find/replace.
Test Plan: Browsed around Calendar, verified that nothing seemed broken. Saw my red dot in other apps.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4375
Differential Revision: https://secure.phabricator.com/D8145
Summary: Ref T3583. This doesn't add any dashboard/panel-specific code beyond headers/titles/buttons/etc., but allows you to create and view dashboards and panel skeletons.
Test Plan: See screenshots.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3583
Differential Revision: https://secure.phabricator.com/D8131
Summary: Ref T4368. We don't currently GC these tables, and the sent mail table is one of the largest on `secure.phabricator.com`. There's no value in retaining this information indefinitely. Instead, retain it for 90 days, which should be plenty of time to debug/diagnose any issues.
Test Plan: Ran `phd debug garbage`, saw it clean up a reasonable amount of data from these tables.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4368
Differential Revision: https://secure.phabricator.com/D8127
Summary:
Fixes T4202. We have old code in MetaMTA which implements gradual backoff and maximum retries.
However, we have more general code in the task queue which does this, too. We can just use the more general stuff in the task queue; it obsoletes the specific stuff in MetaMTA, which is more complex and ran into some kind of issue in T4202.
Remove `retryCount`, `nextRetry` (obsoleted by task queue retry mechanisms) and "simulated failures" (no longer in use).
Generally, modern infrastructure has replaced these mechanisms with more general ones.
Test Plan:
- Sent mail.
- Observed unsendable mail failing in reasonable ways in the queue.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4202
Differential Revision: https://secure.phabricator.com/D8115
Summary:
Ref T3583. General idea here is:
- Users will be able to create `DashboardPanel`s, which are things like the jump nav, or a minifeed, or recent assigned tasks, or recent tokens given, or whatever else.
- The `DashboardPanel`s can be combined into `Dashboard`s, which select specific panels and arrange them in some layout (and maybe have a few other options eventually).
- Then, you'll be able to set a specific `Dashboard` for your home page, and maybe for project home pages. But you can also use `Dashboard`s on their own if you just like dashboards.
My plan is pretty much:
- Put in basic infrastructure for dashboards (this diff).
- Add basic create/edit (next few diffs).
- Once dashboards sort of work, do the homepage integration.
This diff does very little: you can't create dashboards or panels yet, and thus there are no dashboards to look at. This is all skeleton code, pretty much.
IMPORTANT: We need an icon bwahahahahaha
Test Plan:
omg si purrfect
{F106367}
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3583
Differential Revision: https://secure.phabricator.com/D8109
Summary:
Moves away from ArcanistProjects:
- Adds storage for diffs to be directly associated with a repository (instead of indirectly, through arcanist projects). Not really populated yet.
- Drops `parentRevisionID`, which is obsoleted by the "Depends On" edge. This is not exposed in the UI anywhere and doesn't do anything. Resolves TODO.
Test Plan: Ran storage upgrades, browsed around, lots of `grep`.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D8072
Summary:
Ref T4327. I want to make change parsing testable; one thing which is blocking this is that the Git discovery process is still part of `PullLocal` daemon instead of being part of `DiscoveryEngine`. The unit test stuff which I want to use for change parsing relies on `DiscoveryEngine` to discover repositories during unit tests.
The major reason git discovery isn't part of `DiscoveryEngine` is that it relies on the messy "autoclose" logic, which we never implemented for Mercurial. Generally, I don't like how autoclose was implemented: it's complicated and gross and too hard to figure out and extend.
Instead, I want to do something more similar to what we do for pushes, which is cleaner overall. Basically this means remembering the old branch heads from the last time we parsed a repository, and figuring out what's new by comparing the old and new branch heads. This should give us several advantages:
- It should be simpler to understand than the autoclose stuff, which is pretty mind-numbing, at least for me.
- It will let us satisfy branch and tag queries cheaply (from the database) instead of having to go to the repository. We could also satisfy some ref-resolve queries from the database.
- It should be easier to extend to Mercurial.
This implements the basics -- pretty much a table to store the cursors, which we update only for Git for now.
Test Plan:
- Ran migration.
- Ran `bin/repository discover X --trace --verbose` on various repositories with branches and tags, before and after modifying pushes.
- Pushed commits to a git repo.
- Looked at database tables.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4327
Differential Revision: https://secure.phabricator.com/D7982
Summary:
Ref T4310. Fixes T3720. This change:
- Removes concurrent session limits. Instead, unused sessions are GC'd after a while.
- Collapses all existing "web-1", "web-2", etc., sessions into "web" sessions.
- Dramatically simplifies the code for establishing a session (like omg).
Test Plan: Ran migration, checked Sessions panel and database for sanity. Used existing session. Logged out, logged in. Ran Conduit commands.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4310, T3720
Differential Revision: https://secure.phabricator.com/D7978
Summary:
Ref T3116. This creates a policy rule where you can require a signature on a given legalpad document.
NOTE: signatures must be for the *latest* document version.
Test Plan: made a task have a custom policy requiring a legalpad signature. verified non-signers were locked out.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T3116
Differential Revision: https://secure.phabricator.com/D7977
Summary:
Ref T3720. Ref T4310. Currently, we limit the maximum number of concurrent sessions of each type. This is primarily because sessions predate garbage collection and we had no way to prevent the session table from growing fairly quickly and without bound unless we did this.
Now that we have GC (and it's modular!) we can just expire unused sessions after a while and throw them away:
- Add a `sessionExpires` column to the table, with a key.
- Add a GC for old sessions.
- When we establish a session, set `sessionExpires` to the current time plus the session TTL.
- When a user uses a session and has used up more than 20% of the time on it, extend the session.
In addition to this, we could also rotate sessions, but I think that provides very little value. If we do want to implement it, we should hold it until after T3720 / T4310.
Test Plan:
- Ran schema changes.
- Looked at database.
- Tested GC:
- Started GC.
- Set expires on one row to the past.
- Restarted GC.
- Verified GC nuked the session.
- Logged in.
- Logged out.
- Ran Conduit method.
- Tested refresh:
- Set threshold to 0.0001% instead of 20%.
- Loaded page.
- Saw a session extension ever few page loads.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4310, T3720
Differential Revision: https://secure.phabricator.com/D7976
Summary:
Ref T4310. Ref T3720. Two major things are going on here:
- I'm making this table work more like a standard table, which, e.g., makes `delete()` simpler to implement.
- Currently, the primary key is `(userPHID, type)`. I want to get rid of this, issue unlimited sessions, and GC old sessions. This means we can't have a unique key on `(userPHID, type)` anymore. This removes it as the primary key and adds it as a normal key instead. There's no functional change -- the code to generate sessions guarantees that it will never write duplicate rows or write additional rows -- but allows us to drop the `-1`, `-2` qualifiers in the future.
- Also of note, our task is made far simpler here because MySQL will automatically assign values to new `AUTO_INCREMENT` columns, so we don't have to migrate to get real IDs.
Test Plan: Ran migrations, verified table looked sane. Logged out, logged in.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3720, T4310
Differential Revision: https://secure.phabricator.com/D7975
Summary: Adds "verified" and "secretKey" to Legalpad document signatures. For logged in users using an email address they own, things are verified right away. Otherwise, the email is sent a verification letter. When the user clicks the link the signature is marked verified.
Test Plan: signed the document with a bogus email address not logged in. verified the email that would be sent looked good from command line. followed link and successfully verified bogus email address
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran, asherkin
Maniphest Tasks: T4283
Differential Revision: https://secure.phabricator.com/D7930
Summary: This adds in the create flow for the Project board columns on the super secret board page which totally doesn't do anything right now.
Test Plan:
1. Apply diff.
2. Go to super secret page.
3. Click link close to top with a way too long name.
4. Enter a name for the column.
5. Enjoy a new column briefly before realising you cannot remove it.
6. Stay happy!
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: tmaroschik, Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7925
Summary:
Ref T2015. Adds human-readable names to Drydock blueprints.
Also the new patches stuff is so much nicer.
Test Plan: Edited, created, and reviewed migrated blueprints.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7918
Summary:
Ref T1049. Currently you can cancel a build, but now that we're tracking a lot more state we can stop, resume, and restart builds.
When the user issues a command against a build, I'm writing it into an auxiliary queue (`HarbormasterBuildCommand`) and then reading them out in the worker. This is mostly to avoid race messes where we try to `save()` the object in multiple places: basically, the BuildEngine is the //only// thing that writes to Build objects, and it holds a lock while it does it.
Test Plan:
- Created a plan which runs "sleep 2" a bunch of times in a row.
- Stopped, resumed, and restarted it.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, chad
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7892
Summary:
If you have private replies on and a Macro reply handler set, we try to access `getMailKey()` and fail. See P1039 for a trace.
(Thanks to @Korvin for picking this up.)
Test Plan: Set configuration, repro'd the exception, applied the patch, then disabled/enabled a macro.
Reviewers: btrahan
Reviewed By: btrahan
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D7896
