Summary:
Ref T10333. Ref T8135. Depends on D20247. Allow users to drag-and-drop cards on a priority-sorted workboard under headers, even if the header has no other cards.
As of D20247, headers show up but they aren't really interactive. Now, you can drag cards directly underneath a header (instead of only between other cards). For example, if a column has only one "Wishlist" task, you may drag it under the "High", "Normal", or "Low" priority headers to select a specific priority.
(Some of this code still feels a little rough, but I think it will generalize once other types of sorting are available.)
Test Plan: Dragged cards within and between priority groups, saw appropriate priority edits applied in every case I could come up with.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10333, T8135
Differential Revision: https://secure.phabricator.com/D20248
Summary:
Ref T10333. When workboards are ordered (for example, by priority), add headers to the various groups. Major goals are:
- Allow users to drag-and-drop to set values that no cards currently have: for example, you can change a card priority to "normal" by dragging it under the "normal" header, even if no other cards in the column are currently "Normal".
- Make future orderings more useful, particularly "order by assignee". We don't really have room to put the username on every card and it would create a fair amount of clutter, but we can put usernames in these headers and then reference them with just the profile picture. This also allows you to assign to users who are not currently assigned anything in a given column.
- Make the drag-and-drop behavior more obvious by showing what it will do more clearly (see T8135).
- Make things a little easier to scan in general: because space on cards is limited, some information isn't conveyed very clearly (for example, priority information is currently conveyed //only// through color, which can be hard to pick out visually and is probably not functional for users who need vision accommodations).
- Maybe do "swimlanes": this is pretty much a "swimlanes" UI if we add whitespace at the bottom of each group so that the headers line up across all the columns (e.g., "Normal" is at the same y-axis position in every column as you scroll down the page). Not sold on this being useful, but it's just a UI adjustment if we do want to try it.
NOTE: This only makes these headers work for display.
They aren't yet recognized as targets by the drag list UI, so you can't drag cards into an empty group. I'll tackle that in a followup.
Test Plan: {F6257686}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10333
Differential Revision: https://secure.phabricator.com/D20247
Summary:
Ref T10334. Partly, this just improves visual feedback for all drag operations. After D20242, we can have cases where you (for example) drag a low-priority node to a very tall column on a priority-ordered workboard. In this case, the actual dashed-border-drop-target may not be on screen.
We might make the column scroll or put some kind of hint in the UI in this case, but an easy starting point is just to make the "yes, you're targeting this column" state a bit more clear.
Test Plan: Dragged tasks between columns, saw the border higlight on the target columns. This is very tricky to take a screenshot of.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10334
Differential Revision: https://secure.phabricator.com/D20245
Summary:
Ref T10334. When a workboard is ordered by priority, dragging from column "A" to a particular place in column "B" currently means "move this task to column B, and adjust its priority so that it naturally sorts into the location under my mouse cursor".
Users frequently find this confusing / undesirable.
To begin improving this, make "drag from column A to column B" and "drag from somewhere in column A to somewhere else in column A" into different operations. The first operation, a movement between columns, no longer implies an ordering change. The second action still does.
So if you actually want to change the priority of a task, you drag it within its current column. If you just want to move it to a different column, you drag it between columns.
This creates some possible problems:
- Some users may love the current behavior and just not be very vocal about it. I doubt it, but presumably we'll hear from them if we break it.
- If you actualy want to move + reorder, it's a bit more cumbersome now. We could possibly add something like "shift + drag" for this if there's feedback.
- The new behavior is probably less surprising, but may not be much more obvious. Future changes (for example, in T10335) should help make it more clear.
- When you mouse cursor goes over column B, the card dashed-rectangle preview target thing jumps to the correct position in the column -- but that may not be under your mouse cursor. This feels pretty much fine if the whole column fits on screen. It may not be so great if the column does not fit on screen and the dashed-rectangle-thing has vanished. This is just a UI feedback issue and we could refine this later (scroll/highlight the column).
Test Plan:
- Created several tasks at different priority levels, sorted a board by priority, dragged tasks between columns. Dragging from "A" to "B" no longer causes a priority edit.
- Also, dragged within a column. This still performs priority edits.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10334
Differential Revision: https://secure.phabricator.com/D20242
Summary:
Ref T13249. See PHI1115. I initially wanted to make `bin/policy unlock --owner <user> H123` work to transfer ownership of a Herald rule, although I'm no longer really sure this makes much sense.
In any case, this makes things a little better and more modern.
I removed the storage table for rule comments. Adding comments to Herald rules doesn't work and probably doesn't make much sense.
Test Plan: Created and edited Herald rules, grepped for all the transaction type constants.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13249
Differential Revision: https://secure.phabricator.com/D20258
Summary:
Ref T13249.
- When a line has only increased in indent depth, don't red-fill highlight the left side of the diff. Since reading a diff //mostly// involves focusing on the right side, indent depth changes are generally visible enough without this extra hint. The extra hint can become distracting in cases where there is a large block of indent depth changes.
- Move the markers slightly to the left, to align them with the gutter.
- Make them slightly opaque so they're a little less prominent.
Test Plan: See screenshots.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13249
Differential Revision: https://secure.phabricator.com/D20251
Summary:
Depends on D20219. Ref T13258. Ref T11415. Installs sometimes have long-running builds or unimportant builds which they may not want to hold up drafts, affect buildable status, or warn during `arc land`.
Some builds have side effects (like deployment or merging) and are not idempotent. They can cause problems if restarted.
In other cases, builds are isolated and idempotent and generally safe, and it's okay for marketing interns to restart them.
To address these cases, add "Behaviors" to Build Plans:
- Hold Drafts: Controls how the build affects revision promotion from "Draft".
- Warn on Land: Controls the "arc land" warning.
- Affects Buildable: Controls whether we care about this build when figuring out if a buildable passed or failed overall.
- Restartable: Controls whether this build may restart or not.
- Runnable: Allows you to weaken the requirements to run the build if you're confident it's safe to run it on arbitrary old versions of things.
NOTE: This only implements UI, none of these options actually do anything yet.
Test Plan:
Mostly poked around the UI. I'll actually implement these behaviors next, and vet them more thoroughly.
{F6244828}
{F6244830}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13258, T11415
Differential Revision: https://secure.phabricator.com/D20220
Summary:
Ref T13259. An install provided feedback that it wasn't obvious you could click the buttons in this UI.
Make it more clear that these are clickable buttons.
Test Plan:
{F6251585}
{F6251586}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13259
Differential Revision: https://secure.phabricator.com/D20238
Summary:
See T13253. After D20200 (which changed the task schema) these migrations no longer run, since the PHP code will expect a column to exist that won't exist until a `20190220.` migration runs.
We don't need these migrations, since anyone upgrading through September 2017 gets a "rebuild search indexes" activity anyway (see T11932). Just no-op them.
Test Plan: Grepped for `queueDocumentForIndexing()` in `autopatches/`, removed all of it.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D20243
Summary:
Ref T5401. Depends on D20201. Add timestamps to worker tasks to track task creation, and pass that through to archive tasks. This lets us measure the total time the task spent in the queue, not just the duration it was actually running.
Also displays this information in the daemon status console; see screenshot: {F6225726}
Test Plan:
Stopped daemons, ran `bin/search index --all --background` to create lots of tasks, restarted daemons, observed expected values for `dateCreated` and `epochArchived` in the archive worker table.
Also tested the changes to `unarchiveTask` by forcing a search task to permanently fail and then `bin/worker retry`ing it.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T5401
Differential Revision: https://secure.phabricator.com/D20200
Summary:
Depends on D20196. See PHI985. When empty, the "moved/copied" gutter currently renders with the same background color as the rest of the line. This can be misleading because it makes code look more indented than it is, especially if you're unfamiliar with the tool:
{F6225179}
If we remove this misleading coloration, we get a white gap. This is more clear, but looks a little odd:
{F6225181}
Instead, give this gutter a subtle background fill in all casses, to make it more clear that it's a separate gutter region, not a part of the text diff:
{F6225183}
Test Plan: See screenshots. Copied text from a diff, added/removed inlines, etc.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20197
Summary:
Ref T12822. Ref PHI878. This is some leftover code from the old selection behavior that prevented visual selection of the left side of a diff if the user clicked on the right -- basically, a much simpler attack on what ultimately landed in D20191.
I think the change from `th` to `td` "broke" it so it didn't interfere with the other behavior, which is why I didn't have to remove it earlier. It's no longer necessary, in any case.
Test Plan: Grepped for behavior name, selected stuff on both sides of a diff.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12822
Differential Revision: https://secure.phabricator.com/D20196
Summary:
Ref T13161.
- Don't show ">>" when the line indentation changed but the text also changed, this is just "the line changed".
- The indicator seems a little cleaner if we just reuse the existing "bright" colors, which already have colorblind colors anyway.
Test Plan: Got slightly better rendering for some diffs locally.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13161
Differential Revision: https://secure.phabricator.com/D20195
Summary:
Ref T12822. Ref T2495. This is the good version of D20193.
Currently, we display various nonprintable characters (ZWS, nonbreaking space, various control characters) as themselves, so they're generally invisible.
In T12822, one user reports that all their engineers frequently type ZWS characters into source somehow? I don't really believe this (??), and this should be fixed in lint.
That said, the only real reason not to show these weird characters in a special way was that it would break copy/paste: if we render ZWS as "🐑", and a user copy-pastes the line including the ZWS, they'll get a sheep.
At least, they would have, until D20191. Now that this whole thing is end-to-end Javascript magic, we can copy whatever we want.
In particular, we can render any character `X` as `<span data-copy-text="Y">X</span>`, and then copy "Y" instead of "X" when the user copies the node. Limitations:
- If users select only "X", they'll get "X" on their clipboard. This seems fine. If you're selecting our ZWS marker *only*, you probably want to copy it?
- If "X" is more than one character long, users will get the full "Y" if they select any part of "X". At least here, this only matters when "X" is several spaces and "Y" is a tab. This also seems fine.
- We have to be kind of careful because this approach involves editing an HTML blob directly. However, we already do that elsewhere and this isn't really too hard to get right.
With those tools in hand:
- Replace "\t" (raw text / what gets copied) with the number of spaces to the next tab stop for display.
- Replace ZWS and NBSP (raw text) with a special marker for display.
- Replace control characters 0x00-0x19 and 0x7F, except for "\t", "\r", and "\n", with the special unicode "control character pictures" reserved for this purpose.
Test Plan:
- Generated and viewed a file like this one:
{F6220422}
- Copied text out of it, got authentic raw original source text instead of displayed text.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12822, T2495
Differential Revision: https://secure.phabricator.com/D20194
Summary:
Ref T12822. Fixes a few things:
- Firefox selection of weird ranges with an inline between the start and end of the range now works correctly.
- "Show More Context" rows now render, highlight, and select properly.
- Prepares for nodes to have copy-text which is different from display-text.
- Don't do anything too fancy in 1-up/unified mode. We don't copy line numbers after the `content: attr(data-n)` change, but that's as far as we go, because trying to do more than that is kind of weird and not terribly intuitive.
Test Plan:
- Selected and copied weird ranges in Firefox.
- Kept an eye on "Show More Context" rows across select and copy operations.
- Generally poked around in Safari/Firefox/Chrome.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12822
Differential Revision: https://secure.phabricator.com/D20192
Summary:
Ref T12822. Ref T13161. By default, when users select text from a diff and copy it to the clipboard, they get both sides of the diff and all the line numbers. This is usually not what they intended to copy.
As of D20188, we use `content: attr(...)` to render line numbers. No browser copies this text, so that fixes line numbers.
We can use "user-select" CSS to visually prevent selection of line numbers and other stuff we don't want to copy. In Firefox and Chrome, "user-select" also applies to copied text, so getting "user-select" on the right nodes is largely good enough to do what we want.
In Safari, "user-select" is only visual, so we always need to crawl the DOM to figure out what text to pull out of it anyway.
In all browsers, we likely want to crawl the DOM anyway because this will let us show one piece of text and copy a different piece of text. We probably want to do this in the future to preserve "\t" tabs, and possibly to let us render certain character codes in one way but copy their original values. For example, we could render "\x07" as "␇".
Finally, we have to figure out which side of the diff we're copying from. The rule here is:
- If you start the selection by clicking somewhere on the left or right side of the diff, that's what you're copying.
- Otherwise, use normal document copy rules.
So the overall flow here is:
- Listen for clicks.
- When the user clicks the left or right side of the diff, store what they clicked.
- When a selection starts, and something is actually selected, check if it was initiated by clicking a diff. If it was, apply a visual effect to get "user-select" where it needs to go and show the user what we think they're doing and what we're going to copy.
- (Then, try to handle a bunch of degenerate cases where you start a selection and then click inside that selection.)
- When a user clicks elsewhere or ends the selection with nothing selected, clear the selection mode.
- When a user copies text, if we have an active selection mode, pull all the selected nodes out of the DOM and filter out the ones we don't want to copy, then stitch the text back together. Although I believe this didn't work well in ~2010, it appears to work well today.
Test Plan: This mostly seems to work in Safari, Chrome, and Firefox. T12822 has some errata. I haven't tested touch events but am satisfied if the touch event story is anything better than "permanently destroys data".
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13161, T12822
Differential Revision: https://secure.phabricator.com/D20191
Summary:
Ref T13161. Ref T12822. Today, we use invisible Zero-Width Spaces to try to improve copy/paste behavior from Differential.
After D20188, we no longer need ZWS characters to avoid copying line numbers. Get rid of these secret invisible semantic ZWS characters completely.
This means that both the left-hand and right-hand side of diffs become copyable, which isn't desired. I'll fix that with a hundred thousand lines of Javascript in the next change: this is a step toward everything working better, but doesn't fix everything yet.
Test Plan:
- Grepped for `zws`, `grep -i zero | grep -i width`.
- Copied text out of Differential: got both sides of the diff (not ideal).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13161, T12822
Differential Revision: https://secure.phabricator.com/D20189
Summary:
Ref T13161. Ref T12822. See PHI870. Long ago, the web was simple. You could leave your doors unlocked, you knew all your neighbors, crime hadn't been invented yet, and `<th>3</th>` was a perfectly fine way to render a line number cell containing the number "3".
But times have changed!
- In PHI870, this isn't good for screenreaders. We can't do much about this, so switch to `<td>`.
- In D19349 / T13105 and elsewhere, this `::after { content: attr(data-n); }` approach seems like the least bad general-purpose approach for preventing line numbers from being copied. Although Differential needs even more magic beyond this in the two-up view, this is likely good enough for the one-up view, and is consistent with other views (paste, harbormaster logs, general source display) where this technique is sufficient on its own.
The chance this breaks //something// is pretty much 100%, but we've got a week to figure out what it breaks. I couldn't find any issues immediately.
Test Plan:
- Created, edited, deleted inlines in 1-up and 2-up views.
- Replied, keyboard-navigated, keyboard-replied, drag-selected, poked and prodded everything.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13161, T12822
Differential Revision: https://secure.phabricator.com/D20188
Summary:
Depends on D20181. Depends on D20182. Fixes T3498. Ref T13161. My claim, at least, is that D20181 can be tweaked to be good enough to throw away this "feature" completely.
I think this feature was sort of a mistake, where the ease of access to `diff -bw` shaped behavior a very long time ago and then the train just ran a long way down the tracks in the same direction.
Test Plan: Grepped for `whitespace`, deleted almost everything. Poked around the UI a bit. I'm expecting the whitespace changes to get some more iteration this week so I not being hugely pedantic about testing this stuff exhaustively.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13161, T3498
Differential Revision: https://secure.phabricator.com/D20185
Summary:
Ref T13161. See PHI723. Our whitespace handling is based on whitespace flags like `diff -bw`, mostly just for historical reasons: long ago, the easiest way to minimize the visual impact of indentation changes was to literally use `diff -bw`.
However, this approach is very coarse and has a lot of problems, like detecting `"ab" -> "a b"` as "only a whitespace change" even though this is always semantic. It also causes problems in YAML, Python, etc. Over time, we've added a lot of stuff to mitigate the downsides to this approach.
We also no longer get any benefits from this approach being simple: we need faithful diffs as the authoritative source, and have to completely rebuild the diff to `diff -bw` it. In the UI, we have a "whitespace mode" flag. We have the "whitespace matters" configuration.
I think ReviewBoard generally has a better approach to indent depth changes than we do (see T13161) where it detects them and renders them in a minimal way with low visual impact. This is ultimately what we want: reduce visual clutter for depth-only changes, but preserve whitespace changes in strings, etc.
Move toward detecting and rendering indent depth changes. Followup work:
- These should get colorblind colors and the design can probably use a little more tweaking.
- The OneUp mode is okay, but could be improved.
- Whitespace mode can now be removed completely.
- I'm trying to handle tabs correctly, but since we currently mangle them into spaces today, it's hard to be sure I actually got it right.
Test Plan: {F6214084}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13161
Differential Revision: https://secure.phabricator.com/D20181
Summary:
Depends on D20179. Ref T13088. See PHI351. See PHI1018. In various cases, unit tests names are 19 paths mashed together.
This is probably not an ideal name, and the test harness should probably pick a better name, but if users are fine with it and don't want to do the work to summarize on their own, accept them. We may summarize with "..." in some cases depending on how this fares in the UI.
The actual implementation is a separate "strings" table which is just `<hash-of-string, full-string>`. The unit message table can end up being mostly strings, so this should reduce storage requirements a bit.
For now, I'm not forcing a migration: new writes use the new table, existing rows retain the data. I plan to provide a migration tool, recommend migration, then force migration eventually.
Prior to that, I'm likely to move at least some other columns to use this table (e.g., lint names), since we have a lot of similar data (arbitrarily long user string constants that we are unlikely to need to search or filter).
Test Plan: {F6213819}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D20180
Summary:
Ref T13249. See PHI810. We currently show availability dots in some interfaces (timeline, mentions) but not others (typeheads/tokenizers).
They're potentially quite useful in tokenizers, e.g. when assigning tasks to someone or requesting reviews. Show them in more places.
(The actual rendering here isn't terribly clean, and it would be great to try to unify all these various behaviors some day.)
Test Plan:
{F6212044}
{F6212045}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13249
Differential Revision: https://secure.phabricator.com/D20173
Summary:
Ref T13249. See PHI1059. This allows "locked" in `maniphest.statuses` to specify that either "comments" are locked (current behavior, advisory, overridable by users with edit permission, e.g. for calming discussion on a contentious issue or putting a guard rail on things); or "edits" are locked (hard lock, only task owner can edit things).
Roughly, "comments" is a soft/advisory lock. "edits" is a hard/strict lock. (I think both types of locks have reasonable use cases, which is why I'm not just making locks stronger across the board.)
When "edits" are locked:
- The edit policy looks like "no one" to normal callers.
- In one special case, we sneak the real value through a back channel using PolicyCodex in the specific narrow case that you're editing the object. Otherwise, the policy selector control incorrectly switches to "No One".
- We also have to do a little more validation around applying a mixture of status + owner transactions that could leave the task uneditable.
For now, I'm allowing you to reassign a hard-locked task to someone else. If you get this wrong, we can end up in a state where no one can edit the task. If this is an issue, we could respond in various ways: prevent these edits; prevent assigning to disabled users; provide a `bin/task reassign`; uh maybe have a quorum convene?
Test Plan:
- Defined "Soft Locked" and "Hard Locked" statues.
- "Hard Locked" a task, hit errors (trying to unassign myself, trying to hard lock an unassigned task).
- Saw nice new policy guidance icon in header.
{F6210362}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13249
Differential Revision: https://secure.phabricator.com/D20165
Summary:
Ref T13253. Fixes T6615. See that task for discussion.
- Remove three keys which serve no real purpose: `dataID` doesn't do anything for us, and the two `leaseOwner` keys are unused.
- Rename `leaseOwner_2` to `key_owner`.
- Fix an issue where `dataID` was nullable in the active table and non-nullable in the archive table.
In practice, //all// workers have data, so all workers have a `dataID`: if they didn't, we'd already fatal when trying to move tasks to the archive table. Just clean this up for consistency, and remove the ancient codepath which imagined tasks with no data.
Test Plan:
- Ran `bin/storage upgrade`, inspected tables.
- Ran `bin/phd debug taskmaster`, worked through a bunch of tasks with no problems.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13253, T6615
Differential Revision: https://secure.phabricator.com/D20175
Summary:
See PHI1073. Improve the UX here:
- When there are a small number of connected tasks, no changes.
- When there are too many total connected tasks, but not too many directly connected tasks, show hint text with a "View Standalone Graph" button to view more of the graph.
- When there are too many directly connected tasks, show better hint text with a "View Standalone Graph" button.
- Always show a "View Standalone Graph" option in the dropdown menu.
- Add a standalone view which works the same way but has a limit of 2,000.
- This view doesn't have "View Standalone Graph" links, since they'd just link back to the same page, but is basically the same otherwise.
- Increase the main page task limit from 100 to 200.
Test Plan:
Mobile View:
{F6210326}
Way too much stuff:
{F6210327}
New persistent link to the standalone page:
{F6210328}
Kind of too much stuff:
{F6210329}
Standalone view:
{F6210330}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: 20after4
Differential Revision: https://secure.phabricator.com/D20164
Summary:
Ref T13249. See PHI774. When users follow an email login link ("Forgot password?", "Send Welcome Email", "Send a login link to your email address.", `bin/auth recover`), we send them to a password reset flow if an install uses passwords.
If an install does not use passwords, we previously dumped them unceremoniously into the {nav Settings > External Accounts} UI with no real guidance about what they were supposed to do. Since D20094 we do a slightly better job here in some cases. Continue improving this workflow.
This adds a page like "Reset Password" for "Hey, You Should Probably Link An Account, Here's Some Options".
Overall, this stuff is still pretty rough in a couple of areas that I imagine addressing in the future:
- When you finish linking, we still dump you back in Settings. At least we got you to link things. But better would be to return you here and say "great job, you're a pro".
- This UI can become a weird pile of buttons in certain configs and generally looks a little unintentional. This problem is shared among all the "linkable" providers, and the non-login link flow is also weird.
So: step forward, but more work to be done.
Test Plan: {F6211115}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13249
Differential Revision: https://secure.phabricator.com/D20170
Summary: Ref T13249. Poll for Duo updates in the background so we can automatically update the UI when the user clicks the mobile phone app button.
Test Plan: Hit a Duo gate, clicked "Approve" in the mobile app, saw the UI update immediately.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13249
Differential Revision: https://secure.phabricator.com/D20169
Summary:
Depends on D20111. Ref T6703. Currently, each ExternalAccount row is tied to a provider by `providerType` + `providerDomain`. This effectively prevents multiple providers of the same type, since, e.g., two LDAP providers may be on different ports on the same domain. The `domain` also isn't really a useful idea anyway because you can move which hostname an LDAP server is on, and LDAP actually uses the value `self` in all cases. Yeah, yikes.
Instead, just bind each account to a particular provider. Then we can have an LDAP "alice" on seven different servers on different ports on the same machine and they can all move around and we'll still have a consistent, cohesive view of the world.
(On its own, this creates some issues with the link/unlink/refresh flows. Those will be updated in followups, and doing this change in a way with no intermediate breaks would require fixing them to use IDs to reference providerType/providerDomain, then fixing this, then undoing the first fix most of the way.)
Test Plan: Ran migrations, sanity-checked database. See followup changes for more comprehensive testing.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T6703
Differential Revision: https://secure.phabricator.com/D20112
Summary:
Depends on D20140. Ref T13250. Currently, the top-level exception handler doesn't dump stacks because we might not be in debug mode, and we might double-extra-super fatal if we call `PhabricatorEnv:...` to try to figure out if we're in debug mode or not.
We can get around this by setting a flag on the Sink once we're able to confirm that we're in debug mode. Then it's okay for the top-level error handler to show traces.
There's still some small possibility that showing a trace could make us double-super-fatal since we have to call a little more code, but AphrontStackTraceView is pretty conservative about what it does and 99% of the time this is a huge improvement.
Test Plan: {F6205122}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13250
Differential Revision: https://secure.phabricator.com/D20142
Summary:
Ref T13244. See PHI1059. When you lock a task, users who can edit the task can currently override the lock by using "Edit Task" if they confirm that they want to do this.
Mark these edits with an emblem, similar to the "MFA" and "Silent" emblems, so it's clear that they may have bent the rules.
Also, make the "MFA" and "Silent" emblems more easily visible.
Test Plan:
Edited a locked task, overrode the lock, got marked for it.
{F6195005}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: aeiser
Maniphest Tasks: T13244
Differential Revision: https://secure.phabricator.com/D20131
Summary: Ref T13244. See PHI1052. Our error handling for Stripe errors isn't great right now. We can give users a bit more information, and a less jarring UI.
Test Plan:
Before (this is in developer mode, production doesn't get a stack trace):
{F6197394}
After:
{F6197397}
- Tried all the invalid test codes listed here: https://stripe.com/docs/testing#cards
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13244
Differential Revision: https://secure.phabricator.com/D20132
Summary:
Ref T13244. See PHI1055. (Earlier, see D20091 and PHI1047.) Previously, we expanded the Owners package autoreview rules from "Yes/No" to several "Review (Blocking) If Non-Owner Author Not Subscribed via Package" kinds of rules. The sky didn't fall and this feature didn't turn into "Herald-in-Owners", so I'm comfortable doing something similar to the "Audit" rules.
PHI1055 is a request for a way to configure slightly different audit behavior, and expanding the options seems like a good approach to satisfy the use case.
Prepare to add more options by moving everything into a class that defines all the behavior of different states, and converting the "0/1" boolean column to a text column.
Test Plan:
- Created several packages, some with and some without auditing.
- Inspected database for: package state; and associated transactions.
- Ran the migrations.
- Inspected database to confirm that state and transactions migrated correctly.
- Reviewed transaction logs.
- Created and edited packages and audit state.
- Viewed the "Package List" element in Diffusion.
- Pulled package information with `owners.search`, got sensible results.
- Edited package audit status with `owners.edit`.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13244
Differential Revision: https://secure.phabricator.com/D20124
Summary:
Depends on D20122. Fixes T8029. Adds an "Approve User" action to the "Manage" page.
Users are normally approved from the "Approval Queue", but if you click into a user's profile to check them out in more detail it kind of dead ends you right now. I've occasionally hit this myself, and think this workflow is generally reasonable enough to support upstream.
Test Plan: {F6193742}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T8029
Differential Revision: https://secure.phabricator.com/D20123
Summary:
Depends on D20107. Ref T6703. Legalpad currently inserts "email" records into the external account table, but they're never used for anything and nothing else references them.
They also aren't necessary for anything important to work, and the only effect they have is making the UI say "External Account" instead of "None" under the "Account" column. In particular, the signatures still record the actual email address.
Stop doing this, remove all the references, and destroy all the rows.
(Long ago, Maniphest may also have done this, but no longer does. Nuance/Gatekeeper use a more modern and more suitable "ExternalObject" thing that I initially started adapting here before realizing that Legalpad doesn't actually care about this data.)
Test Plan: Signed documents with an email address, saw signature reflected properly in UI. Grepped for other callsites.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T6703
Differential Revision: https://secure.phabricator.com/D20108
Summary:
Depends on D20106. Ref T6703. Since I plan to change the `ExternalAccount` table, these migrations (which rely on `save()`) will stop working.
They could be rewritten to use raw queries, but I suspect few or no installs are affected. At least for now, just make them safe: if they would affect data, fatal and tell the user to perform a more gradual upgrade.
Also remove an `ALTER IGNORE TABLE` (this syntax was removed at some point) and fix a `%Q` when adjusting certain types of primary keys.
Test Plan: Ran `bin/storage upgrade --no-quickstart --force --namespace test1234` to get a complete migration since the beginning of time.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T6703
Differential Revision: https://secure.phabricator.com/D20107
Summary:
Depends on D20041. See PHI1046. If you do this:
- Create a parent project called "Crab" in Space 1.
- Create a milestone called "Left Claw".
- Shift "Crab" to Space 2.
- Create a milestone called "Right Claw".
...you currently end up with "Left Claw" in the wrong `spacePHID` in the database. At the application level it's in the correct space, but when we `WHERE ... AND spacePHID IN (...)` we can incorrectly filter it out.
Test Plan:
- Did the above setup.
- Saved "Crab", saw the space fix itself.
- Put things back in the broken state.
- Ran the migration script, saw things fix themselves again.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: aeiser, PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D20063
Summary:
Ref T13242. See PHI1039. Maniphest subtypes generally seem to be working well. I designed them as a general capability that might be extended to other `EditEngine` objects later, and PHI1039 describes a situation where extending subtypes to projects would give us some reasonable tools.
(Some installs also already use icons/colors as a sort of lightweight version of subtypes, so I believe this is generally useful capability.)
Some of this is a little bit copy-pasted and could probably be shared, but I'd like to wait a bit longer before merging it. For example, both configs have exactly the same structure right now, but Projects should possibly have some different flags (for example: to disable creating subprojects / milestones).
This implementation is pretty basic for now: notably, subprojects/milestones don't get the nice "choose from among subtype forms" treatment that tasks do. If this ends up being part of a solution to PHI1039, I'd plan to fill that in later on.
Test Plan: Defined multiple subtypes, created subtype forms, created projects with appropriate subtypes. Filtered them by subtype. Saw subtype information on list/detail views.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13242
Differential Revision: https://secure.phabricator.com/D20040
Summary:
Depends on D20026. Ref T13222. Ref T13231. The primary change here is that we'll no longer send you an SMS if you hit an MFA gate without CSRF tokens.
Then there's a lot of support for genralizing into Duo (and other push factors, potentially), I'll annotate things inline.
Test Plan: Implemented Duo, elsewhere.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13231, T13222
Differential Revision: https://secure.phabricator.com/D20028
Summary:
Depends on D20016. Ref T920. This does nothing interesting on its own since the TOTP provider has no guidance/warnings, but landing it separately helps to simplify an upcoming SMS diff.
SMS will have these guidance messages:
- "Administrator: you haven't configured any mailer which can send SMS, like Twilio."
- "Administrator: SMS is weak."
- "User: you haven't configured a contact number."
Test Plan: {F6151283} {F6151284}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T920
Differential Revision: https://secure.phabricator.com/D20017
Summary:
Depends on D20010. Ref T920. Allow users to designate which contact number is "primary": the number we'll actually send stuff to.
Since this interacts in weird ways with "disable", just do a "when any number is touched, put all of the user's rows into the right state" sort of thing.
Test Plan:
- Added numbers, made numbers primary, disabled a primary number, un-disabled a number with no primaries. Got sensible behavior in all cases.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T920
Differential Revision: https://secure.phabricator.com/D20011
Summary:
Ref T920. To send you SMS messages, we need to know your phone number.
This adds bare-bone basics (transactions, storage, editor, etc).
From here:
**Disabling Numbers**: I'll let you disable numbers in an upcoming diff.
**Primary Number**: I think I'm just going to let you pick a number as "primary", similar to how email works. We could imagine a world where you have one "MFA" number and one "notifications" number, but this seems unlikely-ish?
**Publishing Numbers (Profile / API)**: At some point, we could let you say that a number is public / "show on my profile" and provide API access / directory features. Not planning to touch this for now.
**Non-Phone Numbers**: Eventually this could be a list of other similar contact mechanisms (APNS/GCM devices, Whatsapp numbers, ICQ number, twitter handle so MFA can slide into your DM's?). Not planning to touch this for now, but the path should be straightforward when we get there. This is why it's called "Contact Number", not "Phone Number".
**MFA-Required + SMS**: Right now, if the only MFA provider is SMS and MFA is required on the install, you can't actually get into Settings to add a contact number to configure SMS. I'll look at the best way to deal with this in an upcoming diff -- likely, giving you partial access to more of Setings before you get thorugh the MFA gate. Conceptually, it seems reasonable to let you adjust some other settings, like "Language" and "Accessibility", before you set up MFA, so if the "you need to add MFA" portal was more like a partial Settings screen, maybe that's pretty reasonable.
**Verifying Numbers**: We'll probably need to tackle this eventually, but I'm not planning to worry about it for now.
Test Plan: {F6137174}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: avivey, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T920
Differential Revision: https://secure.phabricator.com/D19988
Summary:
Ref T13222. Users configure "Factor Configs", which say "I have an entry on my phone for TOTP secret key XYZ".
Currently, these point at raw implementations -- always "TOTP" in practice.
To support configuring available MFA types (like "no MFA") and adding MFA types that need some options set (like "Duo", which needs API keys), bind "Factor Configs" to a "Factor Provider" instead.
In the future, several "Factors" will be available (TOTP, SMS, Duo, Postal Mail, ...). Administrators configure zero or more "MFA Providers" they want to use (e.g., "Duo" + here's my API key). Then users can add configs for these providers (e.g., "here's my Duo account").
Upshot:
- Factor: a PHP subclass, implements the technical details of a type of MFA factor (TOTP, SMS, Duo, etc).
- FactorProvider: a storage object, owned by administrators, configuration of a Factor that says "this should be available on this install", plus provides API keys, a human-readable name, etc.
- FactorConfig: a storage object, owned by a user, says "I have a factor for provider X on my phone/whatever with secret key Q / my duo account is X / my address is Y".
Couple of things not covered here:
- Statuses for providers ("Disabled", "Deprecated") don't do anything yet, but you can't edit them anyway.
- Some `bin/auth` tools need to be updated.
- When no providers are configured, the MFA panel should probably vanish.
- Documentation.
Test Plan:
- Ran migration with providers, saw configs point at the first provider.
- Ran migration without providers, saw a provider created and configs pointed at it.
- Added/removed factors and providers. Passed MFA gates. Spot-checked database for general sanity.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19975
Summary: Depends on D19992. Ref T13222. If administrators provide a custom login message, show it on the login screen.
Test Plan:
{F6137930}
- Viewed login screen with and without a custom message.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19994
Summary:
Ref T13222. Long ago, we had a Config option (`welcome.html`) to let you dump HTML onto the login screen, but this was relatively hard to use and not good from a security perspective.
In some cases this was obsoleted by Dashboards, but there's at least some remaining set of use cases for actual login instructions on the login screen. For example, WMF has some guidance on //which// SSO mechanism to use based on what types of account you have. On `secure`, users assume they can register by clicking "Log In With GitHub" or whatever, and it might reduce frustration to tell them upfront that registration is closed.
Some other types of auth messaging could also either use customization or defaults (e.g., the invite/welcome/approve mail).
We could do this with a bunch of Config options, but I'd generally like to move to a world where there's less stuff in Config and more configuration is contextual. I think it tends to be easier to use, and we get a lot of fringe benefits (granular permissions, API, normal transaction logs, more abililty to customize workflows and provide contextual help/hints, etc). Here, for example, we can provide a remarkup preview, which would be trickier with Config.
This does not actually do anything yet.
Test Plan: {F6137541}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19992
Summary:
See PHI1023. Ref T7607. Occasionally, companies need their billing address (or some other custom text) to appear on invoices to satisfy process or compliance requirements.
Allow accounts to have a custom "Billing Name" and a custom "Billing Address" which appear on invoices.
Test Plan: {F6134707}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T7607
Differential Revision: https://secure.phabricator.com/D19979
Summary:
Ref T13222. Ref T13231. See PHI912. I'm planning to turn MFA providers into concrete objects, so you can disable and configure them.
Currently, we only support TOTP, which doesn't require any configuration, but other provider types (like Duo or Yubikey OTP) do require some configuration (server URIs, API keys, etc). TOTP //could// also have some configuration, like "bits of entropy" or "allowed window size" or whatever, if we want.
Add concrete objects for this and standard transaction / policy / query support. These objects don't do anything interesting yet and don't actually interact with MFA, this is just skeleton code for now.
Test Plan:
{F6090444}
{F6090445}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13231, T13222
Differential Revision: https://secure.phabricator.com/D19935
Summary: See PHI1017. This is a trivial fix even though these burnups are headed toward a grisly fate.
Test Plan: Moused over some January datapoints, saw "1" instead of "0".
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19967
Summary:
Ref T12509. This upgrades a `weakDigest()` callsite to SHA256-HMAC and removes three config options:
- `celerity.resource-hash`: Now hard-coded, since the use case for ever adjusting it was very weak.
- `celerity.enable-deflate`: Intended to make cache inspection easier, but we haven't needed to inspect caches in ~forever.
- `celerity.minify`: Intended to make debugging minification easier, but we haven't needed to debug this in ~forever.
In the latter two cases, the options were purely developer-focused, and it's easy to go add an `&& false` somewhere in the code if we need to disable these features to debug something, but the relevant parts of the code basically work properly and never need debugging. These options were excessively paranoid, based on the static resource enviroment at Facebook being far more perilous.
The first case theoretically had end-user utility for fixing stuck content caches. In modern Phabricator, it's not intuitive that you'd go adjust a Config option to fix this. I don't recall any users ever actually running into problems here, though.
(An earlier version of this change did more magic with `celerity.resource-hash`, but this ended up with a more substantial simplification.)
Test Plan: Grepped for removed configuration options.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12509
Differential Revision: https://secure.phabricator.com/D19941
Summary:
Ref T13222. In D19918, I refactored how timelines get "view data". Today, this is always additional data about which images/changesets/diffs are visible on the current revision/commit/mock, so we can tell if inline comments should be linked to a `#anchor` on the same page (if the inline is rendered there somewhere) or to a `/D123?id=1&vs=2` full link on a different page (if it isn't), but in general this could be any sort of state information about the current page that affects how the timeline should render.
Previously, comment previews did not use any specialized object code and always rendered a "generic" timeline story. This was actually a bug, but none of the code we have today cares about this (since it's all inline related, and inlines render separately) so it never impacted anything.
After the `TimelineEngine` change, the preview renders with Differential-specific code. This is more correct, but we were not passing the preview the "view data" so it broke.
This preview doesn't actually need the view data and we could just make it bail out if it isn't present, but pass it through for consistency and so this works like we'd expect if we do something fancier with view data in the future.
Test Plan: Viewed comment and inline comment previews in Differential, saw old behavior restored.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19943
Summary:
Ref T920. Over time, mail has become much more complex and I think considering "mail", "sms", "postcards", "whatsapp", etc., to be mostly-the-same is now a more promising avenue than building separate stacks for each one.
Throw away all the standalone SMS code, including the Twilio config options. I have a separate diff that adds Twilio as a mail adapter and functions correctly, but it needs some more work to bring upstream.
This permanently destroys the `sms` table, which no real reachable code ever wrote to. I'll call this out in the changelog.
Test Plan:
- Grepped for `SMS` and `Twilio`.
- Ran storage upgrade.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T920
Differential Revision: https://secure.phabricator.com/D19939
