Summary: Depends on D19148. Ref T13088. The new rendering always executes range requests for data it needs, and we can satisfy these requests by loading the smallest number of chunks which span that range.
Test Plan: Piped 50,000 lines of Apache log into Harbormaster, viewed it in the new UI, got sensible rendering times and a reasonable amount of data actually going over the wire.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19149
Summary: Ref T13088. This variable bled through from an earlier loop and caused us to drop some of the lines in the middle.
Test Plan: Clicked "Show More", got an equal number of header and footer lines.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19148
Summary:
Depends on D19141. Ref T13088. Some of the fundamental log behaviors like "loading the correct rows" are now a bit better behaved.
The UI is a little less garbage, too.
Test Plan: Viewed some logs and loaded more context by clicking the buttons.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19142
Summary: Depends on D19139. Ref T13088. This doesn't actually work, but is close enough that a skilled attacker might be able to briefly deceive a small child.
Test Plan:
- Viewed some very small logs under very controlled conditions, saw content.
- Larger logs vaguely do something resembling working correctly.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19141
Summary:
Depends on D19138. Ref T13088. When we want to read the last part of a logfile //and show accurate line numbers//, we need to be able to get from byte offsets to line numbers somehow.
Our fundamental unit must remain byte offsets, because a test can emit an arbitrarily long line, and we should accommodate it cleanly if a test emits 2GB of the letter "A".
To support going from byte offsets to line numbers, compute a map with periodic line markers throughout the offsets of the file. From here, we can figure out the line numbers for arbitrary positions in the file with only a constant amount of work.
Test Plan: Added unit tests; ran unit tests.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19139
Summary: Depends on D19137. Ref T13088. This allows `rebuild-log` to skip work if the chunks are already compressed. It also prepares for a future GC which is looking for "text" or "gzip" chunks to throw away in favor of archival into Files; such a GC can use this column to find collectable logs and then write "file" to it, meaning "chunks are gone, this data is only available in Files".
Test Plan: Ran migration, saw logs populate as "text". Ran `rebuild-log`, saw logs rebuild as "gzip".
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19138
Summary: Depends on D19136. Ref T13088. Since it's probably impractical to do all the migrations these changes imply during `bin/storage upgrade`, provide some support for performing them online.
Test Plan: Ran `bin/harbormaster rebuild-log` with `--all`, `--id`, and with and without `--force`.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19137
Summary: Depends on D19135. Ref T13088. Denormalize the total log size onto the log itself. This makes reasoning about the log at display time easier, and we don't need to fish around in the database as much to figure out what we're dealing with.
Test Plan: Ran `bin/harbormaster rebuild-log`, saw an existing log populate. Ran `bin/harbormaster write-log`, saw new log write with proper length information.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19136
Summary:
Depends on D19134. Ref T13088. Future changes will support API writers, so push the log lock into the Log object.
Allow open/close ("this process is writing to this log") to be separate from live/final ("this log is still generating more data").
Test Plan: Wrote logs with `bin/harbormater write-log` and updated logs with `bin/harbormaster rebuild-log`.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19135
Summary: Depends on D19133. Ref T13088. Allows build logs to be formally destroyed, cleaning up their chunks and file data.
Test Plan:
- Used `bin/remove destroy` to destroy a log, verified chunks and files were removed.
- Used `bin/harbormaster rebuild-log` to force a log to rebuild, verified files were destroyed and regenerated.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19134
Summary: Depends on D19132. Ref T13088. This implements an extremely skeletal dedicated log page with a more-or-less functional "Download Log" button.
Test Plan: Downloaded a recent log. Tried to download an old (un-finalized) log, couldn't. Used `bin/harbormaster write-log` to get a convenient standalone link to a log.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19133
Summary: Depends on D19131. Ref T13088. During log finalization, stream the log into Files to support "Download Log", archive to Files, and API access.
Test Plan: Ran `write-log` and `rebuild-log`, saw Files objects generate with log content and appropriate permissions.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19132
Summary: Depends on D19130. Ref T13088. Currently, when a build log is closed we compress it in the same process. Separate this out into a dedicated worker since the plan is to do a lot more work during finalization, none of which needs to happen inline during builds (or, particuarly, inline during a Conduit call for API writes in the future).
Test Plan: Ran `bin/harbormaster write-log --trace`, saw compression run inline.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19131
Summary: Ref T13088. This is currently minimal but the modify-execute development loop on build logs is extremely long without it.
Test Plan: Ran `echo hi | ./bin/harbormaster write-log --target 12345`, saw the log show up in the web UI.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19130
Summary: See D19117. Instead of automatically figuring this out inside `phutil_tag()`, explicitly add rel="noreferrer" at the application level to all external links.
Test Plan:
- Grepped for `_blank`, `isValidRemoteURIForLink`, checked all callsites for user-controlled data.
- Created a link menu item, verified noreferrer in markup.
- Created a link custom field, verified no referrer in markup.
- Verified noreferrer for `{nav href=...}`.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D19118
Summary:
Depends on D19084. Fixes T13078. When `phabricator.silent` is enabled, immediately fail the "HTTP Request", "CircleCI" and "Buildkite" build steps.
This doesn't feel quite as clean as most of the other behavior of `phabricator.silent`, since these calls are not exactly notifications in the same way that email is, and failing to make these calls means that builds run differently (whereas failing to deliver email doesn't really do anything).
However, I suspect that this behavior is almost always reasonable/correct, and that we can probably get away with it until this grey area between "notifications" and "external service calls" is more clearly defined.
Test Plan:
- Created a build with HTTP, CircleCI, and Buildkite steps.
- Put install in `phabricator.silent` mode: all three steps failed with "declining, because silent" messages.
- Put install back in normal mode: all three steps made HTTP requests.
- Read updated documentation.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13078
Differential Revision: https://secure.phabricator.com/D19085
Summary:
Depends on D19065. Ref T13054. Instead of just updating `containerPHID` and hoping for the best, queue a proper BuildWorker to process a "your container has changed, update it" message.
We also need to remove a (superfluous) `withContainerPHIDs()` when loading active diffs for a revision.
Test Plan:
- Without daemons, created a revision and saw builds stick in "preparing" with no container PHID, but also stay in draft mode.
- With daemons, saw builds actually build and get the right container PHID.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13054
Differential Revision: https://secure.phabricator.com/D19066
Summary:
Depends on D19064. Ref T13054. See that task for additional discussion.
When buildables are created by `arc` and have lint/unit messages, they can currently pass or fail before Herald triggers actual builds. This puts them in a pre-build state where they can't complete until Herald says it's okay.
On its own, this change intentionally strands `arc diff --only` diffs in the "PREPARING" stage forever.
Test Plan:
- Ran a build with `bin/harbormaster`, saw it build normally.
- Ran a build with web UI, saw it build normally.
- Ran a build with `arc diff`, saw it build normally.
- Ran a build with `arc diff --only`, saw it hang in "PREPARING" forever.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13054
Differential Revision: https://secure.phabricator.com/D19065
Summary: Depends on D19063. Ref T13054. Prepare for the addition of a new `PREPARING` status by getting rid of the "scattered mess of switch statements" pattern of status management.
Test Plan: Searched/browsed buildables. Viewed buildables. Viewed revisions. Grepped for all affected symbols.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13054
Differential Revision: https://secure.phabricator.com/D19064
Summary: Ref T13054. Companion storage change for D19062.
Test Plan: Applied migration and adjustments. Viewed messages in Harbormaster; created them with `harbormaster.sendmessage`; processed them with `bin/phd debug task`.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13054
Differential Revision: https://secure.phabricator.com/D19063
Summary:
See T13054. This prepares for Buildables to be sent messages ("attach", "done scheduling builds") to fix races between Harbormaster and Differential.
The `buildTargetPHID` is replaced with a `recipientPHID` in the API. An additional change will fix the storage.
In the future, this table could probably also replace `HarbormasterBuildCommand` now, which is approximately the same bus, but for Builds.
Test Plan: Viewed builds with messages. Sent messages with `harbormaster.sendmessage`. Processed messages with `bin/phd debug task`.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D19062
Summary:
Ref T13054. Fixes T10746. Fixes T11154. This is really a one-line fix (include `ABORTED` in `BuildEngine->updateBuildable()`) but try to structure the code a little more clearly too and reduce (at least slightly) the number of random lists of status attributes spread throughout the codebase.
Also add a header tag for buildable status.
Test Plan: Aborted a build, saw buildable fail properly.
Subscribers: yelirekim, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13054, T11154, T10746
Differential Revision: https://secure.phabricator.com/D19055
Summary:
Ref PHI261. This moves Harbormaster build status to work more similarly to other modern status types, like Differential revision status, where we try to specify as much behavior on the server as possible so that the client and server can vary independently.
(I don't have any specific plans to make Harbormaster build status configurable on the server side, but it isn't out of the question.)
Test Plan: Ran `harbormaster.querybuilds` (saw same data as before) and `harbormaster.build.search` (saw same data as before, plus new ANSI color data).
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D18838
Summary:
Ref T2543. Fixes T10109.
Currently, Herald only runs in Differential when a change updates the diff. This is partly for historical reasons, and partly because we don't want to restart builds every time someone makes a comment. However, this behavior is inconsistent with other applications (which always trigger on any change), and occasionally confusing to users (in T10109, for example) or otherwise undesirable.
A similar issue is that T2543 has introduced a "Draft" state, where revisions don't send normal mail until builds finish. This interacts poorly with "Send me an email" rules (which shouldn't do anything here) and particularly with "Send me an email + only run these actions the first time the rule matches", since that might have an effect like "do nothing when the revision is created, then never anything again since you already did nothing once".
To navigate both of these issues, let objects tell Herald that certain actions (like mail or builds) are currently forbidden. If a rule uses a field or action which is currently forbidden, the whole rule automatically fails before it executes, but doesn't count toward "only the first time" as far as Herald's tracking of rule execution is concerned.
Then, forbid mail for draft revisions, and forbid builds for revisions which didn't just get updated. Forbidding mail fixes the issues with "Send me an email" that were created by the introduction of the draft state.
Finally, make Herald run on every revision update, not just substantive updates to the diff. This resolves T10109.
Test Plan:
Created revisions via the draft -> submit workflow, saw different transcripts. Here's a mail action being forbidden for a draft:
{F5237324}
Here's a build action being forbidden for a "mundane" update:
{F5237326}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T10109, T2543
Differential Revision: https://secure.phabricator.com/D18731
Summary: See PHI176. We issue a query with only `artifactIndex` from `BuildTarget`, but don't have an applicable key.
Test Plan: This isn't on the normal Harbormaster execution path so I'm not 100% sure I have a local repro, but will confirm with customer.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D18732
Summary:
Ref T2543. When a revision is created, we check if any builds are waiting/failed, and submit it for review immediately if we aren't waiting for anything.
In doing this, we ignore builds with only autotargets, since these are client-side and failures from local `arc lint` / `arc unit` should not count (the user has already chosen to ignore/skip them).
The way we do this has some issues:
- Herald may have started builds, but they may still be PENDING and not have any targets yet. In this case, we'll see "no non-autotargets" and ignore the build, which is wrong.
- We have to load targets but don't really care about them, which is more work than we really need to do.
- And it's kind of complex, too.
Instead, just let `BuildQuery` filter out "autobuilds" (builds generated from autoplans) with a JOIN.
Test Plan: Ran `arc diff` with builds configured, got a clean "Draft" state instead of an incorrect promotion directly to "Needs Review".
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18721
Summary: Noticed a couple of typos in the docs, and then things got out of hand.
Test Plan:
- Stared at the words until my eyes watered and the letters began to swim on the screen.
- Consulted a dictionary.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, yelirekim, PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D18693
Summary: Fixes T12883. The task seems correct to me and I think this is a copy/paste mistake that probably blames to me.
Test Plan: Fiddled these numbers, viewed a build in Harbormaster, saw the adjusted time.
Reviewers: chad, amckinley
Reviewed By: chad
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T12883
Differential Revision: https://secure.phabricator.com/D18177
Summary:
Ref T12173.
- If we want to fetch a tag, Buildkite needs it as a "branch" (this means more like "ref to fetch").
- The API gets upset if we pass "refs/tags/...", so just pass the tag name without the prefix, which works.
- Do a better job with commits and pass a real branch to fetch.
Test Plan:
- Built a commit with Buildkite.
- Build a revision with Buildkite.
Reviewers: chad
Reviewed By: chad
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T12173
Differential Revision: https://secure.phabricator.com/D17282
Summary: Ref T12173. This might need some additional work but the basics seem like they're in good shape.
Test Plan:
- Buildkite is "bring your own hardware", so you need to launch a host to test anything.
- Launched a host in AWS.
- Configured Buildkite to use that host to run builds.
- Added a Buildkite build step to a new Harbormaster build plan.
- Used `bin/harbormaster build ...` to run the plan.
- Saw buildkite execute builds and report status back to Harbormaster
{F2553076}
{F2553077}
Reviewers: chad
Reviewed By: chad
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T12173
Differential Revision: https://secure.phabricator.com/D17270
Summary:
Fixes T9276. Fixes T8650. The story so far:
- We once published build updates to Revisions.
- An unrelated fix (D10911) sent them to the Diffs instead of Revisions, which isn't useful, since you can't see a diff's timeline anywhere.
- This also caused a race condition, where the RevisionEditor and DiffEditor would update the diff simultaneously (T8650).
- The diff update was just disabled to avoid the race (part of D13441).
- Instead, allow the updates to go somewhere else. In this case, we send commit updates to the commit but send diff updates to the revision so you can see 'em.
- Since everything will be using the revision editor now, we should either get proper lock behavior for free or it should be easy to add if something whack is still happening.
- Overall, this should pretty much put us back in working order like we were before D10911.
This behavior is undoubtedly refinable, but this should let us move forward.
Test Plan:
Saw a build failure in timeline:
{F2304575}
Reviewers: chad
Reviewed By: chad
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T9276, T8650
Differential Revision: https://secure.phabricator.com/D17139
Summary: Fixes T11910. I spent a couple of minutes looking for the root cause without much luck, but this will all be obsoleted by an eventual upgrade to `EditEngine` anyway.
Test Plan: Set and unset "Wait for Message", which now worked.
Reviewers: chad, avivey
Reviewed By: avivey
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T11910
Differential Revision: https://secure.phabricator.com/D16919
Summary:
Ref T11887. This isn't a great fix but makes the method behave properly until I get around to a real fix.
In the longer term, I want to convert all of this pluggable Harbormaster/Drydock stuff (blueprints, artifacts, build plans) to use EditEngine + EditField instead of the weird mishmash of older/custom stuff it currently uses. However, this is a more involved project to execute and I'd like to be in that area of the codebase first so it gets adequate testing.
Until that happens, just put a reasonble-ish mechanism in place to let artifacts correct inbound types. This is the only artifact type and only parameter which needs casting.
Test Plan:
- Made a `curl` call to `harbormaster.createartifact` to create a URI artifact with `?...&ui.external=1`.
- Before patch: type error on `ui.external` not being a boolean.
- After patch: artifact created successfully.
Reviewers: chad
Reviewed By: chad
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T11887
Differential Revision: https://secure.phabricator.com/D16887
Summary: Fixes T11642. Added a 'name' field to the results from harbormaster.build.search.
Test Plan: Went to `/conduit/method/harbormaster.build.search/` and ran a search that would yield results (because otherwise there will be nothing there). Noted that there was, in fact, a name in the results.
Reviewers: yelirekim, #blessed_reviewers, epriestley
Reviewed By: yelirekim, #blessed_reviewers, epriestley
Subscribers: epriestley, yelirekim
Maniphest Tasks: T11642
Differential Revision: https://secure.phabricator.com/D16569
Summary:
Ref T10867 for original use case. This workflow provides a plausible way for administrators to stop the daemons when performing upgrades or maintenance, then bring those daemons back up without resulting in the failure of builds that were running at the time.
On our organization's phab install, builds are running 24/7. The majority of these builds last for at least several minutes, and contain build steps which fail if interrupted and then resumed, as happens when turning daemons on and off.
Instead of allowing these build steps to resume execution as normal, this workflow will instruct active builds to restart their entire build process instead of just resuming whichever step they were on.
Test Plan:
contrived a build plan which would fail if resumed partway through:
- lease a working copy
- command `touch restart_{build.id}`
- command `test -e restart_{build.id} && rm restart_{build.id} && sleep 60`
followed old procedure:
- run a few of these builds manually
- `./bin/phd stop`
- `./bin/phd start`
- saw the builds fail
followed new procedure:
- run a few of these builds manually
- `./bin/phd stop`
- `./bin/harbormaster restart --active`
- `./bin/phd start`
- saw the builds pass
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Maniphest Tasks: T10867
Differential Revision: https://secure.phabricator.com/D16485
Summary: See T10746.
Test Plan: Fail one of several builds, run `./bin/harbormaster update`, see that Build Status is Failed.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, O14 ATC Monitoring, yelirekim
Maniphest Tasks: T10746
Differential Revision: https://secure.phabricator.com/D16480
Summary: Ref T11132, significantly cleans up the Config app, new layout, icons, spacing, etc. Some minor todos around re-designing "issues", mobile support, and maybe another pass at actual Group pages.
Test Plan: Visit and test every page in the config app, set new items, resolve setup issues, etc.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam, Korvin
Maniphest Tasks: T11132
Differential Revision: https://secure.phabricator.com/D16468
Summary:
Ref T11473. When running `harbormaster.build.search` with a `buildables` constraint, the constraint doesn't get passed to the Query and so currently has no effect.
This piece of logic was just accidentally omitted from D16356. It is probably not used anywhere today and doesn't show up in the UI, so it's easy to overlook (I missed it in review, too).
Test Plan: Ran `harbormaster.build.search` with a `buildables` constraint, got expected filtering.
Reviewers: yelirekim, chad
Reviewed By: chad
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T11473
Differential Revision: https://secure.phabricator.com/D16395
Summary: Fixes T11409. This syntax isn't compatible with older PHP.
Test Plan: Ran `arc lint` on the file.
Reviewers: yelirekim, chad
Reviewed By: chad
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T11409
Differential Revision: https://secure.phabricator.com/D16358
Summary: We deprecate the existing API method used to access build information from the API, but preserve its response structure after calling through to the new method. I've cordoned off the fields I needed to define in order to meet the output structure by putting those fields in a search attachment.
Test Plan:
Used the API console and looked at the list view controller for builds.
Old output structure:
```lang=json
{
"data": [
{
"id": "16823",
"phid": "PHID-HMBD-xghrwfz6luoye5rgc2hq",
"uri": "https://secure.phabricator.com/harbormaster/build/16823/",
"name": "Run Core Tests",
"buildablePHID": "PHID-HMBB-s6ykzm2jzxz4ymduztq3",
"buildPlanPHID": "PHID-HMCP-pcfxcgyoif67l3buc4zt",
"buildStatus": "passed",
"buildStatusName": "Passed"
}
],
"cursor": {
"limit": 100,
"after": "16823",
"before": null
}
}
```
New output structure:
```lang=json
{
"data": [
{
"id": 1,
"type": "HMBD",
"phid": "PHID-HMBD-qpgcmv67tzaauzayzit5",
"uri": "http://ec2-54-165-244-168.compute-1.amazonaws.com/harbormaster/build/1/",
"name": "arc lint + arc unit",
"buildStatusName": "Passed",
"buildablePHID": "PHID-HMBB-qdefith5uakkepqpjr2g",
"buildPlanPHID": "PHID-HMCP-zswbhazb7ipmaf4plygg",
"buildStatus": "passed",
"initiatorPHID": "PHID-USER-rihx4366f3aczsvc2wtb",
"dateCreated": 1450295643,
"dateModified": 1450295644,
"policy": {
"view": "users",
"edit": "users"
}
}
],
"maps": {},
"query": {
"queryKey": null
},
"cursor": {
"limit": 100,
"after": null,
"before": null,
"order": null
}
}
```
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D16356
Summary:
It's only natural for users to be interested their own builds. We are also building in support for other sources of builds, the only formally supported way to run a build right now is via Herald.
In our third party codebase, we designate an application as the "thing" that started builds which are scheduled and managed automatically by phabricator. I believe this is a common practice elsewhere in the codebase when you're at a loss for a real human identity and you need to apply some transactions.
Test Plan: Ran some builds manually and saw them show up under the list of things I've run. Looking up builds based on those that had been started by a herald rule.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D16353
Summary:
We're picking three useful groups of build statuses to provide as default queries:
- Stuff not yet building
- Stuff building
- Stuff which has finished building
These are reasonable buckets for builds since (unlike most objects in phabricatorland) users are generally waiting impatiently for the machine to do something for them, rather than being responsible for doing something with the machine.
Test Plan: clicked around the search engine and enjoyed my defaults
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D16349
Summary:
This supports a few basic use cases that aren't served by the buildable search engine:
- I'm trying to discover when the last time that this particular build plan failed was.
- I want to know if any builds have deadlocked.
- At a glance, I'm more interested in what build plans are running, not which buildables are being built. This is more often than not the case.
Test Plan: {F1744003}
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D16347
Summary: Ref T10628. This moves everything else over. I'll clean up the cruft in the next diff.
Test Plan:
- Viewed Conduit API page, toggled tabs.
- Viewed Harbormaster build, toggled tabs.
- Viewed a Drydock lease, swapped tabs.
- Viewed a Drydock resource, swapped tabs.
- Viewed mail, swapped tabs.
- Grepped for `addPropertyList(...)`, looked for any remaining calls with a second argument.
- Also checked rSAAS for any calls, but we don't have anything there that uses tabs.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10628
Differential Revision: https://secure.phabricator.com/D16207
Summary:
Ref T11153. If you have a build plan like this:
- Lease machine A.
- Lease machine B.
- Run client-tests on machine A.
- Run server-tests on machine B.
...and we get machine A quickly, then finish the tests, we currently do not release machine A until the whole plan finishes.
In the best case, this wastes resources (something else could be using that machine for a while).
In a worse case, this wastes a lot of resources (if machine B is slow to acquire, or the server tests are much slower than the client tests, machine A will get tied up for a really long time).
In the absolute worst case, this might deadlock things.
Instead, release artifacts as soon as no waiting/running steps take them as inputs. In this case, we'd release machine A as soon as we finished running the client tests.
In the case where machines A and B are resources of the same type, this should prevent deadlocks. In all cases, this should improve build throughput at least somewhat.
Test Plan:
I wrote this build plan which runs a "fast" step (10 seconds) and a "slow" step (120 seconds):
{F1691190}
Before the patch, running this build plan held the lease on the "fast" machine for the full 120 seconds, then released both leases at the same time at the very end.
After this patch, I ran this plan and observed the "fast" lease get released after 10 seconds, while the "slow" lease was held for the full 120.
(Also added some `var_dump()` into things to sanity check the logic; it appeared correct.)
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11153
Differential Revision: https://secure.phabricator.com/D16145
Summary:
Ref T11137. This class is removed in D16099. Depends on D16099.
`PhutilURI` now attempts to "just work" with Git-style URIs, so at least in theory we can just delete all of this code and pretend it does not exist.
(I've left "Display URI" and "Effective URI" as distinct, at least for now, because I think the distinction may be relevant in the future even though it isn't right now, and to keep this diff small, although I may go remove one after I think about this for a bit.)
Test Plan:
- Created a new Git repository with a Git URI.
- Pulled/updated it, which now works correctly and should resolve the original issue in T11137.
- Verified that daemons now align the origin to a Git-style URI with a relative path, which should resolve the original issue in T11004.
- Grepped for `PhutilGitURI`.
- Also grepped in `arcanist/`, but found no matches, so no patch for that.
- Checked display/conduit URIs.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11137
Differential Revision: https://secure.phabricator.com/D16100
Summary: Going to render these all normal case instead of all caps, and bump up the font size. Should be more consistent. Yellow if you green anything orange.
Test Plan: grep, lint
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15645
Summary: Cleans up EditEngine, adds new layout to EditEngine and descendents
Test Plan: Test creating a new form, reordering, marking and unmarking defaults. View new forms.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15531
Summary:
Ref T10537. For Nuance, I want to introduce new sources (like "GitHub" or "GitHub via Nuance" or something) but this needs to modularize eventually.
Split ContentSource apart so applications can add new content sources.
Test Plan:
This change has huge surface area, so I'll hold it until post-release. I think it's fairly safe (and if it does break anything, the breaks should be fatals, not anything subtle or difficult to fix), there's just no reason not to hold it for a few hours.
- Viewed new module page.
- Grepped for all removed functions/constants.
- Viewed some transactions.
- Hovered over timestamps to get content source details.
- Added a comment via Conduit.
- Added a comment via web.
- Ran `bin/storage upgrade --namespace XXXXX --no-quickstart -f` to re-run all historic migrations.
- Generated some objects with `bin/lipsum`.
- Ran a bulk job on some tasks.
- Ran unit tests.
{F1190182}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10537
Differential Revision: https://secure.phabricator.com/D15521
Summary: Updates the Harbormaster UI to match the new two column everywhere else.
Test Plan: Did best I could, tested builds, plans, steps, buildables. Unable to test lint/unit locally, I need to set that up. Kick the tires for me pls. :3
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15523
Summary: Ref T9456. This makes everything work, except that CircleCI doesn't fetch tags which are not ancestors of branch heads.
Test Plan: Ran passing builds through CircleCI.
Reviewers: chad
Reviewed By: chad
Subscribers: dpaola2, JustinTulloss
Maniphest Tasks: T9456
Differential Revision: https://secure.phabricator.com/D14288
Summary: Ref T9456. Some rough edges and we can't complete the build yet since I haven't written a webhook, but this mostly seems to be working.
Test Plan:
- Ran this build on some stuff.
- Ran a normal HTTP step build to make sure I didn't break that.
{F880301}
{F880302}
{F880303}
Reviewers: chad
Reviewed By: chad
Subscribers: JustinTulloss, joshma
Maniphest Tasks: T9456
Differential Revision: https://secure.phabricator.com/D14286
Summary:
First pass at converting Differential, I likely have some buggy-poos but thought I'd toss this up now in case very bad bugs present.
To do:
- Need to put status back on Hovercards
- "Diff Detail" probably needs a better design
Test Plan: Looking at lots of diffs, admittedly I dont have harbormaster, etc, running locally. Checked Diffusion for Table of Content changes on small and large commits.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15463
Summary:
Ref T10537. More infrastructure:
- Put a `bin/nuance` in place with `bin/nuance import`. This has no useful behavior yet.
- Allow sources to be searched by substring. This supports `bin/nuance import --source whatever` so you don't have to dig up PHIDs.
Test Plan:
- Applied migrations.
- Ran `bin/nuance import --source ...` (no meaningful effect, but works fine).
- Searched for sources by substring in the UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10537
Differential Revision: https://secure.phabricator.com/D15436
Summary: Ref T10093. Changes must be pushed to staging before they can be landed from the web.
Test Plan:
Changes must be pushed to staging before they can be landed from the web.
{F1161909}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10093
Differential Revision: https://secure.phabricator.com/D15427
Summary:
Every caller returns `true`. This was added a long time ago for Projects, but projects are no longer subscribable.
I don't anticipate needing this in the future.
Test Plan: Grepped for this method.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15409
Summary:
Ref T10457.
- Let blueprints be tagged so you can search and annotate them a little more easily.
- Give each blueprint type an optional icon to make things a little easier to parse visually.
Test Plan:
- Tagged blueprints.
- Searched by tags.
- Looked at nice little icons.
{F1139712}
Reviewers: chad
Reviewed By: chad
Subscribers: yelirekim
Maniphest Tasks: T10457
Differential Revision: https://secure.phabricator.com/D15392
Summary:
Ref T5822.
- After a log is closed, compress it if possible.
- Provide `bin/harbormaster archive-logs` to make it easier to change the storage format of logs.
Test Plan:
- Ran `bin/harbormaster archive-logs` on a bunch of logs, compressing and decompressing them without issues (same hashes, same decompressed size across multiple iterations).
- Ran new builds, verified logs were compressed after they closed.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5822
Differential Revision: https://secure.phabricator.com/D15380
Summary: Ref T5822. This will make it easier to compress and archive chunks without needing to hold them in memory.
Test Plan: Ran a build, looked at some logs.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5822
Differential Revision: https://secure.phabricator.com/D15378
Summary:
Ref T10457. Currently, this table is an ad-hoc table, but can easily be turned into a normal table.
This will make iterating over log chunks to compress and archive them easier.
Test Plan: Viewed logs, ran `bin/storage adjust` with no issues.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10457
Differential Revision: https://secure.phabricator.com/D15376
Summary:
Ref T10457. Currently, every `append()` call necessarily generates queries, and these queries are slightly inefficient if a large block of data is appended to a partial log (they do about twice as much work as they technically need to).
Use `PhutilRope` to buffer `append()` input so the logic is a little cleaner and we could add a rule like "flush logs no more than once every 500ms" later.
Test Plan:
- Ran a build, saw logs.
- Set chunk size very small, ran build, saw logs, verified small logs in database.
{F1137115}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10457
Differential Revision: https://secure.phabricator.com/D15375
Summary:
Ref T5822. This prepares for inline compression and garbage collection of build logs.
This reduces the API surface area and removes a log from the "wait" step that would just log a message every 15 seconds. (If this is actually useful, I think we find a better way to communicate it.)
Test Plan:
Ran a build, saw a log:
{F1136691}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5822
Differential Revision: https://secure.phabricator.com/D15371
Summary:
Ref T10457. Skipped tests are almost always well-behaved (e.g., `testWindows()`, but the test is running on Linux) and not interesting, and we do not expect well-written, solid systems to necessarily have 0 skips.
Although skips //could// indicate that you have missing dependencies on a build server, and thus be a bit interesting, I think they almost always indicate that a particular test is not expected to run in the current environment.
If we wanted to tackle this problem in granular detail, we could eventually add a "Missing" status or similar which would serve as "a skip you //could// reasonably fix in this environment", but I don't think that's too interesting.
Test Plan:
Here's an example of a build result with skips: B10875
{F1136511}
I think this is clearer as "Passed", as this is the expected production state of the build.
Locally, looked at some builds.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10457
Differential Revision: https://secure.phabricator.com/D15369
Summary: Ref T10457. This gives unit test results a more first-class treatment in the Differential UI, and consolidates some rendering code.
Test Plan:
Before:
{F1135536}
After:
{F1135537}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10457
Differential Revision: https://secure.phabricator.com/D15365
Summary:
Ref T10457. When tests fail, it currently takes several clicks to figure out //why// they failed.
In this project, map rebuilds and `liberate` are fairly common failure conditions, but verifying that they were the root issue requires jumping into a build, then scrolling through a log.
Instead, display details if they're available.
Test Plan:
Before:
{F1135453}
After:
{F1135454}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9951, T10457
Differential Revision: https://secure.phabricator.com/D15363
Summary: Ref T10457. These lack color and iconography and are difficult to parse. Make them easier to read.
Test Plan:
Before:
{F1135396}
After:
{F1135399}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10457
Differential Revision: https://secure.phabricator.com/D15362
Summary: Ref T10457. This is mostly just for consitency, but I imagine it will make managing large/complex build processes easier, and if we support Herald rules it would eventually let you write "Build plan's tags include [whatever]" to apply behavior to a group of plans.
Test Plan: {F1133107}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10457
Differential Revision: https://secure.phabricator.com/D15360
Summary: Ref T10457. Allow build plans to be queried by name.
Test Plan:
- Searched for plans by name.
- Renamed a plan, searched for new name.
{F1133085}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10457
Differential Revision: https://secure.phabricator.com/D15359
Summary:
Ref T10457.
- Use EditEngine for Build Plans.
- Fix some minor issues with crumbs being inconsistent.
- Fix some minor issues with mobile menus not being consistent/available.
Test Plan:
- Created and edited build plans.
- Poked around in mobile width, verified mobile menu had the right stuff in it.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10457
Differential Revision: https://secure.phabricator.com/D15357
Summary:
Fixes T10011.
- Modernize searching for buildables.
- Prepare for `harbormaster.buildable.search`.
- Allow users to query by status (see T10011).
- Collapse the four weird "commit / diff / revision / repository" fields into two slightly less weird fields with more UI hinting?
Test Plan: {F1131918}
Reviewers: chad
Reviewed By: chad
Subscribers: Luke081515.2
Maniphest Tasks: T10011
Differential Revision: https://secure.phabricator.com/D15356
Summary:
Ref T10457. This makes diffs/revisions show the revision as the buildable title, and commits show the commit as the title.
Previously, the title was "Buildable X".
Also makes icons/colors/labels more consitent.
Test Plan: {F1131885}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10457
Differential Revision: https://secure.phabricator.com/D15355
Summary:
Ref T10457. We currently have these weird, out-of-place methods on Harbormaster queries that just load handles. These were written before HandlePool, and HandlePool is now more convenient, simpler, and more efficient.
Drop this stuff in favor of using handle pools off `$viewer`.
Test Plan: Looked at buildable list, looked at buildable detail, grepped for removed methods.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10457
Differential Revision: https://secure.phabricator.com/D15354
Summary: Fixes T9614. This is kind of silly, but stop users from fighting turf wars over build resources or showing up on an install and just aborting a bunch of builds for the heck of it.
Test Plan:
- Restarted / paused / aborted / etc builds.
- Tried to do the same for builds I didn't have edit permission on the build plan for, got errors.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9614
Differential Revision: https://secure.phabricator.com/D15353
Summary: Fixes T10458. These steps are obsolete and have not worked since the last updates to Drydock. They may eventually return in some form, but get rid of them for now since they're confusing.
Test Plan:
- Created a build plan with these steps.
- Removed these steps.
- Verified the build plan showed that the steps were invalid, and that I could delete them.
- Deleted them.
- Added new steps, no obsolete steps were available for selection.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10458
Differential Revision: https://secure.phabricator.com/D15352
Summary: Moves all the one off object calls to PHUIRemarkupView, adds a "Document" call as well (future plans).
Test Plan: Visited most pages I could get access to, but may want extra careful eyes on this diff.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15281
Summary: Mostly for consistency, we're not using other forms of icons and this makes all classes that use an icon call it in the same way.
Test Plan: tested uiexamples, lots of other random pages.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15125
Summary: Fixes T10192. This key improves some common queries and is not currently present.
Test Plan: See discussion in T10192. Verified current query plan of real queries is garbage and improved by adding this key.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10192
Differential Revision: https://secure.phabricator.com/D15075
Summary:
Ref T6183. Ref T10054. Historically, only members could watch projects because there were some weird special cases with policies. These policy issues have been resolved and Herald is generally powerful enough to do equivalent watches on most objects anyway.
Also puts a "Watch Project" button on the feed panel to make the behavior and meaning more obvious.
Test Plan:
- Watched a project I was not a member of.
- Clicked the feed watch/unwatch button.
{F1064909}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6183, T10054
Differential Revision: https://secure.phabricator.com/D15063
Summary: Ref T4245. These mostly relate to building URIs.
Test Plan: Tried to hunt down as many of these in the UI as I could. Some are a bit tricky but they should be low-risk.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D14933
Summary: Ref T4245. These are all straightforward to remove.
Test Plan:
- Edited paths in a package.
- Ran `bin/audit delete --repositories ...` with various identifiers.
- Searched by repository for `R3`, `rAAAA` in Harbormaster.
- Did a Herald dry run on a commit.
- Browsed commits, made comments.
- Viewed a Releeph product list.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D14927
Summary:
Ref T10004. After D14804, we get this behavior by default and no longer need to set it explicitly.
(If some endpoint did eventually need to set it explicitly, it could just change what it passes to `setHref()`, but I believe we currently have no such endpoints and do not foresee ever having any.)
Test Plan:
- As a logged out user, clicked various links in Differential, Maniphest, Files, etc., always got redirected to a sensible place after login.
- Grepped for `setObjectURI()`, `getObjectURI()` (there are a few remaining callsites, but to a different method with the same name in Doorkeeper).
Reviewers: chad
Reviewed By: chad
Subscribers: hach-que
Maniphest Tasks: T10004
Differential Revision: https://secure.phabricator.com/D14805
Summary:
Fix T9662.
Record who initiated the build, and allow this information as a parameter.
In this implementation, a 're-run' keeps the original initiator, which we maybe not desired?
Test Plan:
Make a HTTP step with initiator.phid, trigger manually, via HM, via ./bin/harbormaster build.
Look at requests made.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T9662
Differential Revision: https://secure.phabricator.com/D14380
Summary: Sets the `$can_edit` value correctly (previously it was hardcoded to `true`).
Test Plan: Went to http://phabricator.local/harbormaster/step/view/1/ and saw "Edit Step" disabled.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14373
Summary:
Fixes T9669. Two issues:
- We were using `repositoryPHIDs` instead of `blueprintPHIDs` for the list of allowed blueprints. Use the correct value.
- We weren't enforcing `allowedBlueprintPHIDs` fully correctly. We //did// require an authorization, so the net effect was correct in nearly all cases, but we could have selected from too large a pool in the case where the application itself was doing the authorization (e.g., from the command line).
Test Plan: Ran a build through Drydock/Harbormaster locally.
Reviewers: chad, tycho.tatitscheff
Reviewed By: chad, tycho.tatitscheff
Subscribers: tycho.tatitscheff
Maniphest Tasks: T9669
Differential Revision: https://secure.phabricator.com/D14368
Summary: Fixes T9674. This was wrong to start with (URI is `/edit/X/`, not `/X/edit/`) but we have a new view page anyway.
Test Plan:
- Visited an exmaple URI in my browser.
- Followed a build step link from "Authorized By: ..." in Drydock.
Reviewers: joshuaspence, chad
Reviewed By: chad
Maniphest Tasks: T9674
Differential Revision: https://secure.phabricator.com/D14366
Summary:
Ref T9252. Right now, we have very strict limits on Drydock: one lease per host, and one working copy per working copy blueprint.
These are silly and getting in the way of using "Land Revision" more widely, since we need at least one working copy for each landable repository.
For now, just remove the host limit and put a simple limit on working copies. This might need to be fancier some day (e.g., limit working copies per-host) but it is generally reasonable for the use cases of today.
Also add a `--background` flag to make testing a little easier.
(Limits are also less important nowadays than they were in the past, because pools expand slowly now and we seem to have stamped out all the "runaway train" bugs where allocators go crazy and allocate a million things.)
Test Plan:
- With a limit of 5, ran 10 concurrent builds and saw them finish after allocating 5 total resources.
- Removed limit, raised taskmaster concurrency to 128, ran thousands of builds in blocks of 128 or 256.
- Saw Drydock gradually expand the pool, allocating a few more working copies at first and a lot of working copies later.
- Got ~256 builds in ~140 seconds, which isn't a breakneck pace or anything but isn't too bad.
- This stuff seems to be mostly bottlenecked on `sbuild` throttling inbound SSH connections. I haven't tweaked it.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14334
Summary:
Fixes T9519. Right now, build steps go straight from the build to the edit screen.
This means that there's no way to see their edit history or review details without edit permission. In particular, this makes it a bit harder to catch the Drydock Blueprint authorization warnings from T9519.
- Add a standard view screen.
- Add a little warning callout to blueprint authorizations.
This also does a bit of a touchup on the weird dropshadow element from T9586. Maybe not totally design-approved now but it's less ugly, at least.
Test Plan:
{F906695}
{F906696}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9519
Differential Revision: https://secure.phabricator.com/D14330
Summary:
Ref T9614. Currently, a lot of Build Plan behavior is covered by a global "can manage" policy.
One install in particular is experiencing difficulty with warring factions within engineering aborting one another's builds.
As a first step to remedy this, and also generally make Harbormaster more flexible and bring it in line with other applications in terms of policy power:
- Give Build Plans normal view/edit policies.
- Require "Can Edit" to run a plan manually.
Having "Can View" on plans may be a little weird in some cases (the status of a Buildable might be bad because of a build you can't see) but we can cross that bridge when we come to it.
Next change here will require "Can Edit" to abort a build. This will reasonably allow installs to reserve pause/abort for administrators/adults. (I might let anyone restart a plan, though?)
Test Plan:
- Created a new build plan.
- Verified defaults were inherited from application defaults (swapped them around, too).
- Saved build plan.
- Edited policies.
- Verified autoplans get the right policies.
- Verified old plans got migrated properly.
- Tried to run a plan I couldn't edit (denied).
- Ran a plan from CLI with `bin/harbormaster`.
- Tried to create a plan with an unprivileged user.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9614
Differential Revision: https://secure.phabricator.com/D14321
