Summary:
Ref T4292. When you run `git fetch` and connect to, say, `repo001.west.company.com`, we'll look at the current version of the repository in other nodes in the cluster.
If `repo002.east.company.com` has a newer version of the repository, we'll fetch that version first, then respond to your request.
To do this, we need to run `git fetch repo002.east.company.com ...` and have that connect to the other host and be able to fetch data.
This change allows us to run `PHABRICATOR_AS_DEVICE=1 git fetch ...` to use device credentials to do this fetch. (Device credentials are already supported and used, they just always connect as a user right now, but these fetches should be doable without having a user. We will have a valid user when you run `git fetch` yourself, but we won't have one if the daemons notice that a repository is out of date and want to update it, so the update code should not depend on having a user.)
Test Plan:
```
$ PHABRICATOR_AS_DEVICE=1 ./bin/ssh-connect local.phacility.com
Warning: Permanently added 'local.phacility.com' (RSA) to the list of known hosts.
PTY allocation request failed on channel 0
phabricator-ssh-exec: Welcome to Phabricator.
You are logged in as device/daemon.phacility.net.
You haven't specified a command to run. This means you're requesting an interactive shell, but Phabricator does not provide an interactive shell over SSH.
Usually, you should run a command like `git clone` or `hg push` rather than connecting directly with SSH.
Supported commands are: conduit, git-lfs-authenticate, git-receive-pack, git-upload-pack, hg, svnserve.
Connection to local.phacility.com closed.
```
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15755
Summary:
Ref T4292. This consolidates code for figuring out which user we should connect to hosts with.
Also narrows a lock window.
Test Plan: Browsed Diffusion, pulled and pushed through an SSH proxy.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15754
Summary:
In calendar, dashboard, diffusion, diviner, feed, fund,
maniphest, pholio, ponder, and slowvote use the term 'tags' if possible.
This intenctionally skips diffusion, differential, and the projects application itself.
Ref T10326 Ref T10349
Test Plan: inspection on a running, locally modified, system
Reviewers: avivey, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T10835, T10326, T10349
Differential Revision: https://secure.phabricator.com/D15753
Summary:
Ref T10832. In practice, `git --version` is not a useful test for this issue:
- Vendors like Debian have backported the patch into custom versions like `0.0.0.1-debian-lots-of-patches.3232`.
- Vendors like Ubuntu distribute multiple different versions which report the same string from `git --version`, some of which are patched and some of which are not.
In other cases, we can perform an empirical test for the vulnerability. Here, we can not, because we can't write a 2GB path in a reasonable amount of time.
Since vendors (other than Apple) //generally// seem to be on top of this and any warning we try to raise based on `git --version` will frequently be incorrect, don't raise this warning.
I'll note this in the changelog instead.
Test Plan: Looked at setup issues, no more warning for vulnerable git version.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10832
Differential Revision: https://secure.phabricator.com/D15756
Summary:
Ref T4292. Ref T10366. Depends on D15751. Today, generating repository commands is purely a function of the repository, so they use protocols and credentials based on the repository configuration.
For example, a repository with an SSH "remote URI" always generate SSH "remote commands".
This needs to change in the future:
- After T10366, repositories won't necessarily just have one type of remote URI. They can only have one at a time still, but the repository itself won't change based on which one is currently active.
- For T4292, I need to generate intracluster commands, regardless of repository configuration. These will have different protocols and credentials.
Prepare for these cases by separating out command construction, so they'll be able to generate commands in a more flexible way.
Test Plan:
- Added unit tests.
- Browsed diffusion.
- Ran `bin/phd debug pull` to pull a bunch of repos.
- Ran daemons.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292, T10366
Differential Revision: https://secure.phabricator.com/D15752
Summary: Users can't find the "Tags" field in the Edit Menu; Added keyword "Tag".
Test Plan: Looked in Edit page; I think this shouldn't change anything else?
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15749
Summary: Ref T4292. This will let the UI and future `bin/repository` tools give administrators more tools to understand problems when reporting or resolving them.
Test Plan:
- Pushed fully clean repository.
- Pushed previously-pushed repository.
- Forced write to abort, inspected useful information in the database.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15748
Summary:
Ref T4292. Small fixes:
- There was a bug with the //first// write, where we'd write 1 but expect 0. Fix this.
- Narrow the window where we hold the `isWriting` lock: we don't need to wait for the client to finish.
- Release the lock even if something throws.
- Use a more useful variable name.
Test Plan:
- Made new writes to a fresh cluster repository.
- Made sequential writes.
- Made concurrent writes.
- Made good writes and bad writes.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15747
Summary:
Fixes T10830.
- The return code from `storage adjust` did not propagate correct.
- There was one column issue which I missed the first time around because I had a bunch of unrelated stuff locally.
Test Plan:
- Ran `bin/storage upgrade -f` with failures, used `echo $?` to make sure it exited nonzero.
- Got fully clean `bin/storage adjust` by dropping all my extra local tables.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10830
Differential Revision: https://secure.phabricator.com/D15746
Summary: Ref T10832. Raise a setup warning for out-of-date versions of `git`.
Test Plan: {F1224632}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10832
Differential Revision: https://secure.phabricator.com/D15745
Summary:
Fixes T10830. Ref T10366. I wasn't writing to this table yet so I didn't build it, but the fact that `bin/storage adjust` would complain slipped my mind.
- Add the table.
- Make the tests run `adjust`. This is a little slow (a few extra seconds) but we could eventually move some steps like this to run server-side only.
Test Plan: Ran `bin/storage upgrade -f`, got a clean `adjust`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10366, T10830
Differential Revision: https://secure.phabricator.com/D15744
Summary:
Ref T10748. This supports more transaction types in the modern editor and improves validation so Conduit benefits.
You can technically create repositories via `diffusion.repository.edit` now, although they aren't very useful.
Test Plan:
- Used `diffusion.repository.edit` to create and edit repositories.
- Used `/editpro/` to edit repositories.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15740
Summary: Ref T10748. Ref T10366. No support for editing and no impact on the UI, but get some of the basics in place.
Test Plan: {F1223279}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10366, T10748
Differential Revision: https://secure.phabricator.com/D15742
Summary: Ref T10748. Pretty straightforward. I'd like to put a little "!" icon in the menu if there's a warning/error eventually, but can deal with that latre.
Test Plan: {F1223096}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15741
Summary:
Ref T10748. This is roughly where I'm headed, if it makes some kind of sense? The "Edit" links in sub-sections don't work yet since I haven't built the thing.
Probably depends on D15736.
Test Plan: Manually navigated to `/manage/`, clicked around.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15737
Summary: Ref T10748. Ref T10337. This technically implements this stuff, but it does not do anything useful yet. This skips all the hard stuff.
Test Plan:
- Technically used `diffusion.repository.search` to get repository information.
- Technically used `diffusion.repository.edit` to change a repository name.
- Used `editpro/` to edit a repository name.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10337, T10748
Differential Revision: https://secure.phabricator.com/D15736
Summary: This error message is pointless and dead-ends logged-in users needlessly if they're sent to the register page by documentation or Advanced Enterprise Sales Funnels.
Test Plan: Visited `/auth/register/` while logged in, was sent home.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15739
Summary: Also make `../` work to start relative a link so I don't have to document it as `./../path`.
Test Plan:
- Used `./`, `../`. `./../`, and normal links (proper title pickup).
- Used bad links (red).
- Regenerated documentation:
{F1221692}
Reviewers: hach-que
Reviewed By: hach-que
Differential Revision: https://secure.phabricator.com/D15734
Summary: Ref T7691 (errata). This shows links to Phriction documents in red if they're missing, and links to Phriction documents in grey with a lock icon if the user doesn't have the correct permissions to see the document.
Test Plan:
Tested a bunch of different configurations:
```
[[ ./../ ]] Back to Main Document
[[ ./../subdocument_2]] Mmmm more documents
[[ ./../invisible_document]] Mmmm more documents
[[ ./../ | Explicit Title ]] Back to Main Document
[[ ./../subdocument_2 | Explicit Title ]] Mmmm more documents
[[ ./../invisible_document | Explicit Title ]] Mmmm more documents
[[ ]] Absolute link
[[ subdocument_2 ]] Absolute link
[[ invisible_document ]] Absolute link
[[ | Explicit Title ]] Absolute link
[[ subdocument_2 | Explicit Title ]] Absolute link
[[ invisible_document | Explicit Title ]] Absolute link
```
Got the expected result:
{F1221106}
Reviewers: epriestley, chad, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T7691
Differential Revision: https://secure.phabricator.com/D15733
Summary:
Resolves T7691. This turned out more complex than I really wanted, mainly because I needed to feed the slug information through to both the document renderer and the preview window that appears in the edit controller.
After this change, you can now create relative links in Phriction by doing `[[ ./../some/relative/path ]]`. Relative paths aren't handled anywhere else (they'll still render, but the dots are turned into a literal 'dot' as per existing behaviour).
Test Plan: Created some Phriction documents with relative links, saw them all link correctly.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Maniphest Tasks: T7691
Differential Revision: https://secure.phabricator.com/D15732
Summary:
This nearly works but I didn't have time to get back to it and it isn't stable enough to turn on in the cluster yet.
We have enough other stuff going out this week, so just disable it before `stable` gets cut. Should be ready by next week if things go well.
Test Plan: Fetched a Git SSH repo locally.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15731
Summary: Ref T10697. I missed this so it isn't reading the new config properly.
Test Plan: Ran `bin/aphlict stop`, saw it read config.
Reviewers: chad, Mnkras
Reviewed By: Mnkras
Subscribers: Mnkras
Maniphest Tasks: T10697
Differential Revision: https://secure.phabricator.com/D15729
Summary: Fixes T9348. If you have edit permission, you can kick people out of a room.
Test Plan:
- Kicked people out of a room.
- As an unprivileged user, wasn't able to kick people out of a room.
- Hit most (all?) of the various weird dialog sub-cases.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9348
Differential Revision: https://secure.phabricator.com/D15728
Summary: Fixes T6806. We haven't seen users having issues with `phd.user` in a very long time.
Test Plan:
- Configured daemons to run as `notepriestley`, got a well-explained exception.
- Configured daemons to run as `epriestley`, got a clean start.
- Configured daemons with `phd.user=null`, got a clean start.
Reviewers: chad, areitz
Reviewed By: areitz
Subscribers: areitz
Maniphest Tasks: T6806
Differential Revision: https://secure.phabricator.com/D15726
Summary:
Ref T10756. This:
- Fixes T7307. This UI is now admin-only.
- Makes the main "running daemons" table more useful for multi-host setups (show where daemons are running).
- Removes logs from the web UI: these are sometimes vaguely sensitive and shouldn't be visible. The UI tells you how to get them with `bin/phd log`.
- Minor modernization.
Test Plan:
- As a non-admin, viewed daemons (access error) and bulk jobs (worked great).
- Browsed bulk job pages.
- Ran a bulk job.
- Viewed daemon console.
- Viewed task detail / daemon detail / daemon list pages.
{F1220516}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7307, T10756
Differential Revision: https://secure.phabricator.com/D15724
Summary: Fixes T10706
Test Plan: Open UI Example of badges. Shouldn't be broken
Reviewers: epriestley, #blessed_reviewers, chad
Reviewed By: #blessed_reviewers, chad
Subscribers: Korvin
Maniphest Tasks: T10706
Differential Revision: https://secure.phabricator.com/D15723
Summary:
Fixes T9385. This was accidentally mangled a bit a long time ago by D12797, which was a 1,000-file change which got almost everything right.
Simplify the message and fix all the `%s` conversions and how they map to parameters.
Test Plan: {F1220400}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9385
Differential Revision: https://secure.phabricator.com/D15722
Summary:
Ref T10696. By default, `node` uses 1.5GB, which is enormous overkill for this service and can crowd out other services if it's running next to things like a database on the same host.
Provide a configuration option to adjust it via `--max-old-space-size` and default to 256MB. It only seems to need about 30M locally, so this should be plenty of headroom.
Test Plan:
Ran `bin/aphlict debug`, things seemed OK.
It takes a long time (days?) to grow to 1.5GB so I can't easily test this locally without a lot of work, but I'll keep an eye on it in production.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10696
Differential Revision: https://secure.phabricator.com/D15720
Summary: Fixes T10816. The way these work is a little unusual since these chunks of file-rendering code are unusuall performance-sensitive, so the Differential version doesn't adapt directly to Diffusion. Both can possibly be unified at some point in the future, although they do slightly different things.
Test Plan: {F1220170}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10816
Differential Revision: https://secure.phabricator.com/D15719
Summary:
Ref T6915. This allows multiple notification servers to talk to each other:
- Every server has a list of every other server, including itself.
- Every server generates a unique fingerprint at startup, like "XjeHuPKPBKHUmXkB".
- Every time a server gets a message, it marks it with its personal fingerprint, then sends it to every other server.
- Servers do not retransmit messages that they've already seen (already marked with their fingerprint).
- Servers learn other servers' fingerprints after they send them a message, and stop sending them messages they've already seen.
This is pretty crude, and the first message to a cluster will transmit N^2 times, but N is going to be like 3 or 4 in even the most extreme cases for a very long time.
The fingerprinting stops cycles, and stops servers from sending themselves copies of messages.
We don't need to do anything more sophisticated than this because it's fine if some notifications get lost when a server dies. Clients will reconnect after a short period of time and life will continue.
Test Plan:
- Wrote two server configs.
- Started two servers.
- Told Phabricator about all four services.
- Loaded Chrome and Safari.
- Saw them connect to different servers.
- Sent messages in one, got notifications in the other (magic!).
- Saw the fingerprinting stuff work on the console, no infinite retransmission of messages, etc.
(This pretty much just worked when I ran it the first time so I probably missed something?)
{F1218835}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6915
Differential Revision: https://secure.phabricator.com/D15711
Summary: Fixes T10812. Make it easier to disambiguate great passwords like `iI|l1oO()thenumber1nospellitout`.
Test Plan: {F1219074}
Reviewers: chad, yelirekim
Reviewed By: yelirekim
Maniphest Tasks: T10812
Differential Revision: https://secure.phabricator.com/D15715
Summary: Updating the subproject and member pages in Projects to new UI
Test Plan: Visit a subproject parent page, visit members pages
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15687
Summary: Default to "All" (maybe "Active" in the future). Adds more info to results.
Test Plan: visit /phurl/, see additional information about URL
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15713
Summary: Fixes T10806. Although browsers don't seem to care about this, it's more correct to support it, and the new test console uses normal `cURL` and does care.
Test Plan:
- Hit the error case for providing a chain but no key/cert.
- Used `openssl s_client -connect localhost:22280` to connect to local Aphlict servers.
- With SSL but no chain, saw `openssl` fail to verify the remote.
- With SSL and a chain, saw `openssl` verify the identify of the remote.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10806
Differential Revision: https://secure.phabricator.com/D15709
Summary:
Ref T10809. Currently, both the proxy and target may mutate URIs (rewriting "svn+ssh://x/diffusion/Y/" to a path on disk).
I believe this previously worked by fate/chance/luck since both URI variants contain the repository information, but the algorithms were tightened up recently with callsign removal.
Stop rewriting them if we're the intracluster proxy -- they only need to be rewritten on the target host.
Test Plan:
- Checked out a proxied SVN repository, with and without a callsign.
- Checked out an unproxied SVN repository, with and without a callsign.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10809
Differential Revision: https://secure.phabricator.com/D15712
Summary:
Fixes T10783 (what little of it remains). Ref T10697.
Aphlict currently uses request paths for two different things:
- multi-tenant instancing in the Phacility cluster (each instance gets its own namespace within an Aphlict server);
- some users configure nginx and apache to do proxying or SSL termination based on the path.
Currently, these can collide.
Put a "~" before the instance name to make it unambiguous. At some point we can possibly just use a GET parameter, but I think there was some reason I didn't do that originally and this sequence of changes is disruptive enough already.
Test Plan: Saw local Aphlict unambiguously recognize "local.phacility.com" as instance "local", with a "~"-style URI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10697, T10783
Differential Revision: https://secure.phabricator.com/D15705
Summary:
Fixes T10697. This finishes bringing the rest of the config up to cluster power levels.
Phabricator is now given an arbitrarily long list of notification servers.
Each Aphlict server is given an arbitrarily long list of ports to run services on.
Users are free to make them meet in the middle by proxying whatever they want to whatever else they want.
This should also accommodate clustering fairly easily in the future.
Also rewrote the status UI and changed a million other things. 🐗
Test Plan:
{F1217864}
{F1217865}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10697
Differential Revision: https://secure.phabricator.com/D15703
Summary: Ref T10697. Mostly straightforward. Also allow the server to have multiple logs and log options in the future (e.g., different verbosities or separate admin/client logs or whatever). No specific plans for this, but the default log is pretty noisy today.
Test Plan: Set up a couple of logs, started server, saw it log to them.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10697
Differential Revision: https://secure.phabricator.com/D15702
Summary: Ref T10697. This isn't everything but starts generalizing options and moving us toward a cluster-ready state of affairs.
Test Plan: Started server in various configurations, hit most (all?) of the error cases with bad configs, sent test notifications.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10697
Differential Revision: https://secure.phabricator.com/D15701
Summary: Ref T10697. This just improves a couple of minor `bin/aphlict` things: make argument parsing more explicit/consistent, consolidate a little bit of duplicated code.
Test Plan: Ran all `bin/aphlict` commands.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10697
Differential Revision: https://secure.phabricator.com/D15698
Summary:
Ref T2783. This allows this worker to run on a machine different to the one that stores the repository, by routing the execution of Git over Conduit calls.
This API method is super gross, but fixing it isn't straightforward and it runs into other complicated considerations. We can fix it later; for now, just define it as "internal" to limit how much mess this creates.
"Internal" methods do not appear on the console.
Test Plan: Ran `bin/repository reparse --change <commit> --trace` on several commits, saw daemons make a Conduit call instead of running a `git` command.
Reviewers: hach-que, chad
Reviewed By: chad
Subscribers: joshuaspence, Korvin, epriestley
Maniphest Tasks: T2783
Differential Revision: https://secure.phabricator.com/D11874
Summary: Fixes T10797. This seems to fix things on my local system.
Test Plan:
- Cloned with a username, got prompted for a password.
- Cloned with a username + password.
- Cloned with a username + bad password (error).
Reviewers: chad
Reviewed By: chad
Subscribers: Grimeh
Maniphest Tasks: T10797
Differential Revision: https://secure.phabricator.com/D15706
Summary:
Ref T10784. Currently, if you terminate SSL at a load balancer (very common) and use HTTP beyond that, you have to fiddle with this setting in your premable or a `SiteConfig`.
On the balance I think this makes stuff much harder to configure without any real security benefit, so don't apply this option to intracluster requests.
Also document a lot of stuff.
Test Plan: Poked around locally but this is hard to test outside of a production cluster, I'll vet it more thoroughly on `secure`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10784
Differential Revision: https://secure.phabricator.com/D15696
Summary:
Ref T10784. On `secure`, logged-out users currently can't browse repositories when cluster/service mode is enabled because they aren't permitted to make intracluster requests.
We don't allow totally public external requests (they're hard to rate limit and users might write bots that polled `feed.query` or whatever which we'd have no way to easily disable) but it's fine to allow intracluster public requests.
Test Plan: Browsed a clustered repository while logged out locally.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10784
Differential Revision: https://secure.phabricator.com/D15695
Summary: Fixes T10772, not sure why this fails, but reverting the code back to old dialog call works.
Test Plan:
- Try to add a new credential when importing a repository.
- Also created a new credential normally, via Passphrase.
- Also edited a credential.
Reviewers: chad
Reviewed By: chad
Subscribers: Korvin
Maniphest Tasks: T10772
Differential Revision: https://secure.phabricator.com/D15691
Summary:
Ref T10751. We currently have a placeholder Almanac document, and a fairly-bad-advice section in Daemons.
Pull these into the modern cluster documentation.
Test Plan: 17 phabricator PHDs
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10751
Differential Revision: https://secure.phabricator.com/D15689
Summary: Fixes T10789. If we aren't configured with a device, we never grabbed a lock in the first place, and should not expect one to be held.
Test Plan: Pushed non-cluster-configured Git SSH repository.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10789
Differential Revision: https://secure.phabricator.com/D15692
Summary:
Ref T4292. This mostly implements the locking/versioning logic for multi-master repositories. It is only active on Git SSH pathways, and doesn't actually do anything useful yet: it just does bookkeeping so far.
When we read (e.g., `git fetch`) the logic goes like this:
- Get the read lock (unique to device + repository).
- Read all the versions of the repository on every other device.
- If any node has a newer version:
- Fetch the newer version.
- Increment our version to be the same as the version we fetched.
- Release the read lock.
- Actually do the fetch.
This makes sure that any time you do a read, you always read the most recently acknowledged write. You may have to wait for an internal fetch to happen (this isn't actually implemented yet) but the operation will always work like you expect it to.
When we write (e.g., `git push`) the logic goes like this:
- Get the write lock (unique to the repository).
- Do all the read steps so we're up to date.
- Mark a write pending.
- Do the actual write.
- Bump our version and mark our write finished.
- Release the write lock.
This allows you to write to any replica. Again, you might have to wait for a fetch first, but everything will work like you expect.
There's one notable failure mode here: if the network connection between the repository node and the database fails during the write, the write lock might be released even though a write is ongoing.
The "isWriting" column protects against that, by staying locked if we lose our connection to the database. This will currently "freeze" the repository (prevent any new writes) until an administrator can sort things out, since it'd dangerous to continue doing writes (we may lose data).
(Since we won't actually acknowledge the write, I think, we could probably smooth this out a bit and make it self-healing //most// of the time: basically, have the broken node rewind itself by updating from another good node. But that's a little more complex.)
Test Plan:
- Pushed changes to a cluster-mode repository.
- Viewed web interface, saw "writing" flag and version changes.
- Pulled changes.
- Faked various failures, got sensible states.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15688
Summary:
Ref T4292. This adds some very basic cluster/device data to the new management view. Nothing interesting yet.
Also deal with disabled bindings a little more cleanly.
Test Plan: {F1214619}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15685
Summary:
Ref T4292. This puts a very rough skeleton in place for the new "Manage Repository" UI, somewhat similar to the "Settings" UI.
Right now, it has one panel with no content, and is not reachable from the UI.
Test Plan: {F1214525}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15683
Summary:
Ref T10756. When repositories are properly configured for the cluster (which is hard to set up today), be smart about which repositories are expected to exist on the current host, and only pull them.
This generally allows daemons to pretty much do the right thing no matter how many copies are running, although there may still be some lock contention issues that need to be sorted out.
Test Plan: {F1214483}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10756
Differential Revision: https://secure.phabricator.com/D15682
Summary: Ref T10702
Test Plan: Open a user profile, attempt to award an archived or previously awarded badge, badges dialog should provide a typeahead, and the suggestions should offer details about whether a badge is archived or already awarded.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T10702
Differential Revision: https://secure.phabricator.com/D15665
Summary:
Ref T4571. Write more of the missing documentation sections and clarify a few things.
Since the "replicating master" check needs a special permission, imposes a performance penalty, is probably very difficult to misconfigure, and likely not a big deal anyway, just drop the idea of trying to automatically detect + prevent it. We still show if it's an issue on the status page, provided we have permission to check.
When you don't have any cluster databases configured, never stop trying to connect to the default master database. We might want to do this eventually as load reduction, but just don't muddy the waters too much for now while things stabilize.
Test Plan:
- Tested functionality in cluster, non-cluster, and degraded-cluster modes.
- Used status console to monitor a health check cycle.
- Read docs.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4571
Differential Revision: https://secure.phabricator.com/D15679
Summary:
Ref T4571. When a database goes down briefly, we fall back to replicas.
However, this fallback is slow (not good for users) and keeps sending a lot of traffic to the master (might be bad if the root cause is load-related).
Keep track of recent connections and fully degrade into "severed" mode if we see a sequence of failures over a reasonable period of time. In this mode, we send much less traffic to the master (faster for users; less load for the database).
We do send a little bit of traffic still, and if the master recovers we'll recover back into normal mode seeing several connections in a row succeed.
This is similar to what most load balancers do when pulling web servers in and out of pools.
For now, the specific numbers are:
- We do at most one health check every 3 seconds.
- If 5 checks in a row fail or succeed, we sever or un-sever the database (so it takes about 15 seconds to switch modes).
- If the database is currently marked unhealthy, we reduce timeouts and retries when connecting to it.
Test Plan:
- Configured a bad `master`.
- Browsed around for a bit, initially saw "unrechable master" errors.
- After about 15 seconds, saw "major interruption" errors instead.
- Fixed the config for `master`.
- Browsed around for a while longer.
- After about 15 seconds, things recovered.
- Used "Cluster Databases" console to keep an eye on health checks: it now shows how many recent health checks were good:
{F1213397}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4571
Differential Revision: https://secure.phabricator.com/D15677
Summary:
Ref T4571. If we fail to connect to the master, automatically try to degrade into a temporary read-only mode ("UNREACHABLE") for the remainder of the request, if possible.
If the request was something like "load the homepage", that'll work fine. If it was something like "submit a comment", there's nothing we can do and we just have to fail.
Detecting this condition imposes a performance penalty: every request checks the connection and gives the database a long time to respond, since we don't want to drop writes unless we have to. So the degraded mode works, but it's really slow, and may perpetuate the problem if the root issue is load-related.
This lays the groundwork for improving this case by degrading futher into a "SEVERED" mode which will persist across requests. In the future, if several requests in a short period of time fail, we'll sever the database host and refuse to try to connect to it for a little while, connecting directly to replicas instead (basically, we're "health checking" the master, like a load balancer would health check a web application server). This will give us a better (much faster) degraded mode in a major service disruption, and reduce load on the master if the root cause is load-related, giving it a better chance of recovering on its own.
Test Plan:
- Disabled master in config by changing the host/username, got degraded automatically to UNREACAHBLE mode immediately.
- Faked full SEVERED mode, requests hit replicas and put me in the mode properly.
- Made stuff work, hit some good pages.
- Hit some non-cluster pages.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4571
Differential Revision: https://secure.phabricator.com/D15674
Summary: Ref T4571. If `cluster.databases` is configured but only has replicas, implicitly drop to read-only mode and send writes to a replica.
Test Plan:
- Disabled the `master`, saw Phabricator automatically degrade into read-only mode against replicas.
- (Also tested: explicit read-only mode, non-cluster mode, properly configured cluster mode).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4571
Differential Revision: https://secure.phabricator.com/D15672
Summary:
Ref T4571. Allows users to click the "read-only mode" notification to get more information about why an install is in read-only mode.
Installs can be in this mode for several reasons (explicit administrative action, no masters defined, no masters reachable), and it's useful to be able to tell the difference.
Test Plan: {F1212930}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4571
Differential Revision: https://secure.phabricator.com/D15671
Summary:
Ref T4571. Ref T10759. Ref T10758. This isn't complete, but gets most of the job done:
- When `cluster.databases` is set up, most things ignore `mysql.host` now.
- You can `bin/storage upgrade` and stuff works.
- You can browse around in the web UI and stuff works.
There's still a lot of weird tricky stuff to navigate, and this has real no advantages over configuring a single server yet (no automatic failover, etc).
Test Plan:
- Configured `cluster.databases` to point at my `t1.micro` hosts in EC2 (master + replica).
- Ran `bin/storage upgrade`, got a new install setup on them properly.
- Survived setup warnings, browsed around.
- Switched back to local config, ran `bin/storage upgrade`, browsed around, went through setup checks.
- Intentionally broke config (bad hosts, no masters) and things seemed to react reasonably well.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4571, T10758, T10759
Differential Revision: https://secure.phabricator.com/D15668
Summary: Ref T4571. The configuration option still doesn't do anything, but add a status panel for basic setup monitoring.
Test Plan:
Here's what a good version looks like:
{F1212291}
Also faked most of the errors it can detect and got helpful diagnostic messages like this:
{F1212292}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4571
Differential Revision: https://secure.phabricator.com/D15667
Summary:
Ref T4571. This adds a new option which allows you to upgrade your one-host configuration to a multi-host configuration by configuring it.
Doing this currently does nothing. I wrote a lot of words about what it is //supposed// to do in the future, though.
Test Plan:
- Tried to configure the option in all the possible bad ways, got errors.
- Read documentation.
Reviewers: chad
Reviewed By: chad
Subscribers: eadler
Maniphest Tasks: T4571
Differential Revision: https://secure.phabricator.com/D15663
Summary:
Ref T4571. There will be a very long path beyond this, but add a basic read-only mode. You can explicitly enable this to put Phabricator in a sort of "maintenance" mode today if you're swapping databases or something.
In the long term, we'll automatically degrade into this mode if the master database is down.
Test Plan:
- Enabled read-only mode.
- Browsed around.
- Didn't immediately see anything that was totally 100% broken.
Most stuff is 80-90% broken right now. For example:
- Stuff like submitting comments doesn't work, and gives you a confusing, unhelpful error.
- None of the UI really knows that it's read-only. EditEngine stuff should all hide itself and say "you can't add new comments while an install is in read-only mode", for example, but currently does not.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4571
Differential Revision: https://secure.phabricator.com/D15662
Summary: Testing out a new 'nav' layout in Settings / Config. Spent a few days here and couldn't find much better overall.
Test Plan: View each page in Settings and in Config. Save some config options. Test mobile, desktop, tablet.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15659
Summary: Fixes T5813, while I'm in here...
Test Plan: Sorted stuff by end date.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5813
Differential Revision: https://secure.phabricator.com/D15657
Summary: Fixes T10684. Fixes T10520. This primarily implements a date/epoch field, and then does a bunch of standard plumbing.
Test Plan:
- Created countdowns.
- Edited countdowns.
- Used HTTP prefilling.
- Created a countdown ending on "Christmas Morning", etc.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10520, T10684
Differential Revision: https://secure.phabricator.com/D15655
Summary: Closes T10690
Test Plan: Open Badges application, go to Advanced Search, search for a badge by its name and see result.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Maniphest Tasks: T10690
Differential Revision: https://secure.phabricator.com/D15656
Summary:
Fixes T8613. This was pretty straightforward, I just never dug into it originally.
`rawResultLimit = 0` just means "no limit", so the fix is to only apply a limit if it is set to some nonzero value.
Also modernize a few pieces of code.
Test Plan: I'm actually not sure this can actually be hit normally? I faked `setGenerateGhosts(true)` into an unrelated query, hit the fatal, then fixed it.
Reviewers: lpriestley, chad
Reviewed By: chad
Maniphest Tasks: T8613
Differential Revision: https://secure.phabricator.com/D15653
Summary: Found another bouncing around.
Test Plan: Review in diff
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15651
Summary: Ref T10262. Instead of dumping an unhelpful 403 "ACCESS DENIED" page on users, explain the most likely cause of the issue and give them a link to return to the file detail page to learn more or get an up-to-date link.
Test Plan: Hit both errors, had a lovely experience with the helpful dialog text.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10262
Differential Revision: https://secure.phabricator.com/D15650
Summary: Ref T6027. We got a not-very-user-friendly default string before.
Test Plan: Selected "Move", didn't change the dropdown, hit submit. Now, got a nice human-readable description of the issue.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6027
Differential Revision: https://secure.phabricator.com/D15649
Summary: Bumps to 14px, fixes some on Differential
Test Plan: view various headers in Differential
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15647
Summary:
Ref T10262. Currently, we always render a tag like this when you `{F123}` an image in remarkup:
```
<img src="/xform/preview/abcdef/" />
```
This either generates the preview or redirects to an existing preview. This is a good behavior in general, because the preview may take a while to generate and we don't want to wait for it to generate on the server side.
However, this flickers a lot in Safari. We might be able to cache this, but we really shouldn't, since the preview URI isn't a legitimately stable/permanent one.
Instead, do a (cheap) server-side check to see if the preview already exists. If it does, return a direct URI. This gives us a stable thumbnail in Safari.
Test Plan:
- Dragged a dog picture into comment box.
- Typed text.
- Thing didn't flicker like crazy all the time in Safari.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10262
Differential Revision: https://secure.phabricator.com/D15646
Summary: Going to render these all normal case instead of all caps, and bump up the font size. Should be more consistent. Yellow if you green anything orange.
Test Plan: grep, lint
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15645
Summary:
Ref T10262. This removes one-time tokens and makes file data responses always-cacheable (for 30 days).
The URI will stop working once any attached object changes its view policy, or the file view policy itself changes.
Files with `canCDN` (totally public data like profile images, CSS, JS, etc) use "cache-control: public" so they can be CDN'd.
Files without `canCDN` use "cache-control: private" so they won't be cached by the CDN. They could still be cached by a misbehaving local cache, but if you don't want your users seeing one anothers' secret files you should configure your local network properly.
Our "Cache-Control" headers were also from 1999 or something, update them to be more modern/sane. I can't find any evidence that any browser has done the wrong thing with this simpler ruleset in the last ~10 years.
Test Plan:
- Configured alternate file domain.
- Viewed site: stuff worked.
- Accessed a file on primary domain, got redirected to alternate domain.
- Verified proper cache headers for `canCDN` (public) and non-`canCDN` (private) files.
- Uploaded a file to a task, edited task policy, verified it scrambled the old URI.
- Reloaded task, new URI generated transparently.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10262
Differential Revision: https://secure.phabricator.com/D15642
Summary:
Ref T10262. Files have an internal secret key which is partially used to control access to them, and determines part of the URL you need to access them. Scramble (regenerate) the secret when:
- the view policy for the file itself changes (and the new policy is not "public" or "all users"); or
- the view policy or space for an object the file is attached to changes (and the file policy is not "public" or "all users").
This basically means that when you change the visibility of a task, any old URLs for attached files stop working and new ones are implicitly generated.
Test Plan:
- Attached a file to a task, used `SELECT * FROM file WHERE id = ...` to inspect the secret.
- Set view policy to public, same secret.
- Set view policy to me, new secret.
- Changed task view policy, new secret.
- Changed task space, new secret.
- Changed task title, same old secret.
- Added and ran unit tests which cover this behavior.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10262
Differential Revision: https://secure.phabricator.com/D15641
Summary:
This reverts commit 3f50ba90f1.
Fixes T10412. Everyone seems to hate this and I don't feel strongly about it. It's definitely a little weird.
Test Plan: Straight revert.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10412
Differential Revision: https://secure.phabricator.com/D15644
Summary: Fixes T10737. I agree that this is a better behavior than always making them blue (boring).
Test Plan:
what
{F1208333}
wut
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T10737
Differential Revision: https://secure.phabricator.com/D15643
Summary:
Ref T6027. Fixes T10734.
- If one of the projects a task is tagged with isn't visible to the user or doesn't have a board, it won't have columns.
- Don't show options for projects with disabled boards.
Test Plan:
- Viewed task with project with no columns; no fatal.
- Viewed task with project with disabled board; no options to move on that board.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10734, T6027
Differential Revision: https://secure.phabricator.com/D15640
Summary:
Ref T6027. Normally, actions use the same order as the form, but in some cases (like moving stuff on workboards) it makes sense to reorder them explicitly.
Pin "Move on board" near the bottom, and "projects/subscribers" at the bottom. I think these are generally reasonable rules in all cases.
Test Plan: Opened menu, saw slightly better action order.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6027
Differential Revision: https://secure.phabricator.com/D15639
Summary:
Ref T6027. Try this out and see how it feels? Clear issues:
- This definitely shouldn't be at the top.
- You should probably be able to select it multiple times?
- Some of the "which columns show up" rules might need adjustment?
- Diamond marker maybe not great?
Not sure I love this but it doesn't feel //terrible//...
Test Plan: {F1207891}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6027
Differential Revision: https://secure.phabricator.com/D15638
Summary: Ref T5214. Fixes T10486. Ref T6027. This exposes the `TYPE_COLUMNS` transaction in a usable way via API, and fixes the interactions via prefilling.
Test Plan:
- Created tasks directly into columns via API.
- Moved tasks between columns via API.
- Used `?column=...` to try to create a template task with valid and bogus column PHIDs.
Reviewers: chad
Reviewed By: chad
Subscribers: AmyLewis
Maniphest Tasks: T5214, T6027, T10486
Differential Revision: https://secure.phabricator.com/D15636
Summary: Ref T6027. This adds human-readable rendering for the new `TYPE_COLUMNS` core transactions.
Test Plan: {F1207784}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6027
Differential Revision: https://secure.phabricator.com/D15635
Summary:
Ref T6027. We currently have two different transaction types:
- `TYPE_PROJECT_COLUMNS` does most of the work, but has a sort of weird structure and isn't really suitable for API use.
- `TYPE_COLUMN` is this weird, junk transaction which mostly just creates the other transaction.
Merge them into a single higher-level `TYPE_COLUMNS` transaction which works properly and has a sensible structure and comprehensive error checking.
Remaining work here:
- I've removed the old rendering logic, but not yet added new logic. I need to migrate the old transaction types and add new rendering logic.
- Although the internal representation is now //suitable// for use in the API, it isn't properly exposed yet.
Test Plan:
- Created tasks into a column.
- Ran unit tests.
- Moved tasks between columns.
- Will perform additional testing in followups.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6027
Differential Revision: https://secure.phabricator.com/D15634
Summary: Ref T10671
Test Plan: Open Conduit application, open `badges.edit` or `badges.search`, create, edit, or query for a badge.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T10671
Differential Revision: https://secure.phabricator.com/D15622
Summary: Modernize Files a bit, use newPage
Test Plan: New file, drag and drop file, view file, edit file
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15631
Summary: Ref T7673. This is really just so I can force admin.phacility.com logout when you log out of an instance, but there are a few other things we could move here eventually, like the WILLREGISTERUSER event.
Test Plan: Logged out of an instance, got logged out of parent (see next change).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7673
Differential Revision: https://secure.phabricator.com/D15629
Summary:
Ref T7303. Currently, our handling of "scope" is fairly rigid and adheres to the spec, but some of these behaviors don't make much sense in practice.
Soften some behaviors and make them more flexible:
**Soft Failure on Unknown Permissions**: If a client asks for a permission we don't know about, just warn that we don't recognize it instead of fataling. In particular, I plan to make `offline_access` and `whoami` implicit. Older clients that request these permissions will still work fine as long as we don't hard-fatal.
**Move `user.whoami` to ALWAYS scope**: Make `whoami` a default permission. We've already done this, in effect; this just formalizes it.
**Tokens no longer expire**: Make `offline_access` (infinite-duration tokens) a default permission. I think the OAuth model doesn't map well to reality. It is common for other providers to issue "temporary" tokens with a duration of multiple years, and the refesh workflow is sort of silly. We can add a "temporary" scope later if we need temporary tokens.
This flow was potentially extra silly with the "log out of Phacility" use case, where we might need to have you log in again before we could log you out, which is bizarre and senseless. Avoid this nonsense.
**Move away from granular permissions**: Users currently get to pick-and-choose which permissions they grant, but this likely rarely/never works in practice and is fairly hostile since applications can't communicate which permissions they need. Applications which can actually operate with only some subset of permissions can make separate requests (e.g., when you activate "cool feature X", it asks for X permission). I think applications that do this are rare; pretty much everything just asks for tons of permissions and everyone grants them.
Making this all-or-nothing is better for well-behaved applications and better for users. It's also slightly better for overzealous applications that ask for more than they need, but whatever. Users can make an informed decision, hopefully, and I plan to let administrators force applications to a subset of permissions once we introduce meaningful scopes.
Test Plan:
- Generated tokens.
- Used tokens.
- Authorized an instance.
- Faked some bogus scopes, got clean authorization.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7303
Differential Revision: https://secure.phabricator.com/D15621
Summary: Converts over to `newPage`
Test Plan: Pull up Settings panel, test a few.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15625
Summary: Ref T7303. This interaction is very oldschool; modernize it to enable/disable instead of "nuke from orbit".
Test Plan:
- Enabled applications.
- Disabled applications.
- Viewed applications in list view.
- Generated new tokens.
- Tried to use a token from a disabled application (got rebuffed).
- Tried to use a token from an enabled application (worked fine).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7303
Differential Revision: https://secure.phabricator.com/D15620
Summary: Runs through Releeph to move to new UI and `newPage`
Test Plan: Ran through product, release, branch, everything seems to work.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15623
Summary: Swaps over to new hotness
Test Plan: Pull up mail view, see new UI
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15616
Summary: Swaps over to `newPage` and `newDialog`
Test Plan: Unsure how to actually pull these up?
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15617
Summary: Updates to use new UI
Test Plan: Save a custom query, edit a custom query
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15618
