Summary:
Ref T4571. There will be a very long path beyond this, but add a basic read-only mode. You can explicitly enable this to put Phabricator in a sort of "maintenance" mode today if you're swapping databases or something.
In the long term, we'll automatically degrade into this mode if the master database is down.
Test Plan:
- Enabled read-only mode.
- Browsed around.
- Didn't immediately see anything that was totally 100% broken.
Most stuff is 80-90% broken right now. For example:
- Stuff like submitting comments doesn't work, and gives you a confusing, unhelpful error.
- None of the UI really knows that it's read-only. EditEngine stuff should all hide itself and say "you can't add new comments while an install is in read-only mode", for example, but currently does not.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4571
Differential Revision: https://secure.phabricator.com/D15662
Summary: Reasonable first pass, removes the "light" header, due to pain of upkeep. Reinforces UI color into the Profile Nav (and later likely dropmenu hovers). Most of this is reasonably easy to maintain now, but I may do a more accurate color pass after I get some more time together with it. For now this feels pretty good if you're developing in a different color UI.
Test Plan:
Switch between all the colors, hover over all the states.
{F1076766}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15120
Summary: Fixes T10217. This extra entry is just a mistake because of `rst` + `rest` both being valid suffixes. We don't need both entries.
Test Plan: Edited a paste, only saw one entry in dropdown for restructured text.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10217
Differential Revision: https://secure.phabricator.com/D15114
Summary: Removes header gradient images for flat, CSS controlled colors. I didn't convert the "pony" colors over, going with few options for easier theme-ability.
Test Plan:
Test each color choice.
{F1063828}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15052
Summary:
See IRC. We're supposed to repair configuration, but if custom validators throw a generic `Exception` or use `PhutilTypeSpec` to do a check, we may explode way harder than we intend to.
Instead, soften these exceptions into validation exceptions so we repair configuration, raise a setup issue, and continue.
Test Plan: {F1059609}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14998
Summary:
Ref T5155. Swaps Phabricator over to the new first-party S3 client using the v4 authentication API so it works in all regions.
The API requires an explicit region, so the new `amazon-s3.region` is now required. I'll write guidance about this.
Test Plan:
- Uploaded files to S3.
- Migrated ~1GB of files to S3.
- Loaded a bunch of files off S3.
- Browsed around the S3 bucket.
- Deleted a file, verified the data on S3 was destroyed.
- Hit new setup warning.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5155
Differential Revision: https://secure.phabricator.com/D14982
Summary: I feel like the daemon configuration should be locked from editing from the web UI, given that much of it won't work unless the daemons are restarted anyway.
Test Plan: N/A
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14867
Summary:
Fixes T9874.
- Stop using the phrase "restart your webserver". Instead, say "restart Phabricator".
- Write a document explaining that "Restart Phabricator" means to restart all of the server processes, depending on how your configuration is set up, and approximately how to do that.
- Link to this document.
- In places where we are not specifically giving instructions and the user isn't expected to do anything, be intentionally vague so as to avoid being misleading.
Test Plan:
- Read document.
- Hit "exetnsion" and "PHP config" setup checks, got "restart Phabricator" with documentation links in both cases.
Reviewers: chad
Maniphest Tasks: T9874
Differential Revision: https://secure.phabricator.com/D14636
Summary: Ref T6049, remarkup links to use short URLs and make commenting on Phurl's actually work
Test Plan:
- Create Phurl `U123`
- Comment on that Phurl `((123))`
Comment should link to `/u/123`
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T6049
Differential Revision: https://secure.phabricator.com/D14477
Summary: Ref T7053. Remove the `envHash` and `envInfo` fields, which are no longer used now that the daemons restart automagically. Depends on D14458.
Test Plan: Saw no more setup issues.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: tycho.tatitscheff, epriestley
Maniphest Tasks: T7053
Differential Revision: https://secure.phabricator.com/D14446
Summary: Cleaning up house, may revisit in a v2. Removes ability to set Disqus or Facebook comments as comment system on Phame Posts.
Test Plan: Create blog, create post, edit blog, view live pages.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: btrahan, Korvin
Maniphest Tasks: T9746
Differential Revision: https://secure.phabricator.com/D14448
Summary: Ref T8995, config option for Phurl short domain to share shortened URL's
Test Plan:
- Configure Phurl short domain to something like "zz.us"
- Navigate to `zz.us`; get 404
- Navigate to `zz.us/u/3` or `zz.us/u/alias` where `U3` is an existing Phurl; redirect to correct destination
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Maniphest Tasks: T8995
Differential Revision: https://secure.phabricator.com/D14447
Summary:
I'm going to do some version of D13941. Clean up extra links to the old document first.
These were just randomly links from various places that we no longer really want feedback on and/or are now better covered by other documents.
Test Plan:
- `grep`
- Reviewed Config/Welcome screen.
- Reviewed `uri.allowed-editor-protocols`.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14303
Summary:
Fixes T9494. This:
- Removes all the random GC.x.y.z config.
- Puts it all in one place that's locked and which you use `bin/garbage set-policy ...` to adjust.
- Makes every TTL-based GC configurable.
- Simplifies the code in the actual GCs.
Test Plan:
- Ran `bin/garbage collect` to collect some garbage, until it stopped collecting.
- Ran `bin/garbage set-policy ...` to shorten policy. Saw change in web UI. Ran `bin/garbage collect` again and saw it collect more garbage.
- Set policy to indefinite and saw it not collect garabge.
- Set policy to default and saw it reflected in web UI / `collect`.
- Ran `bin/phd debug trigger` and saw all GCs fire with reasonable looking queries.
- Read new docs.
{F857928}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9494
Differential Revision: https://secure.phabricator.com/D14219
Summary:
Ref T9346. This mostly allows us to give users additional advice based on which instance they are trying to log in to in the Phacility cluster.
It's also slightly more flexible than `auth.login-message` was, and maybe we'll add some more hooks here eventually.
This feels like it's a sidegrade in complexity rather than really an improvement, but not too terrible.
Test Plan:
- Wrote the custom handler in T9346 to replicate old config functionality.
- Wrote a smart handler for Phacility that can provide context-sensitive messages based on which OAuth client you're trying to use.
See new message box at top (implementation in next diff):
{F780375}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9346
Differential Revision: https://secure.phabricator.com/D14057
Summary:
Fixes T9339.
- Don't show edit control for locked config at all.
- Don't show a "Cancel" button either.
- Change "Value" label to "Database Value" for non-custom config.
- Highlight effective value.
- Move examples under current state.
- Tweak some formatting.
Test Plan: {F777878}
Reviewers: chad, avivey
Reviewed By: chad, avivey
Subscribers: avivey
Maniphest Tasks: T9339
Differential Revision: https://secure.phabricator.com/D14054
Summary: Fixes T8939. The parameters on this pht() just got juggled around at some point.
Test Plan: {F654408}
Reviewers: btrahan, avivey, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T8939
Differential Revision: https://secure.phabricator.com/D13694
Summary: Ref T8099, uses original bgcolor when dark headers are used.
Test Plan: Switch between light and dark Phabricator, see new colors.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T8099
Differential Revision: https://secure.phabricator.com/D13361
Summary: Fixes T8589. Adds a bunch of new languages to the syntax highlighting config options so that they are supported by #paste.
Test Plan: Saw new filetypes in Paste.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T8589
Differential Revision: https://secure.phabricator.com/D13337
Summary: This should default to light, also made the icons on the dark headers more transparent.
Test Plan: Tested light, dark, blue, blindigo, and default.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D13306
Summary: Ref T8099, hashtag#yolo. Adds back the original gradients plus a 'light' theme. Unclear which should be default, but we can play with it until a decision needs to be made.
Test Plan: Change colors a lot, turn on durable column.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T8099
Differential Revision: https://secure.phabricator.com/D13146
Summary:
Ref T6367. Removes `multiplexMail()`!
We can't pass a single body into a function which splits it anymore: we need to split recipients first, then build bodies for each recipient list. This lets us build separate bodies for each recipient's individual translation/access levels.
The new logic does this:
- First, split recipients into groups called "targets".
- Each target corresponds to one actual mail we're going to build.
- Each target has a viewer (whose translation / access levels will be used to generate the mail).
- Each target has a to/cc list (the users who we'll ultimately send the mail to).
- For each target, build a custom mail body based on the viewer's access levels and settings (language prefs not actually implemented).
- Then, deliver the mail.
Test Plan:
- Read new config help.
Then did a bunch of testing, primarily with `bin/mail list-outbound` and `bin/mail show-outbound` (to review generated mail), `bin/phd debug taskmaster` (to run daemons freely) and `bin/worker execute --id <id>` (to repeatedly test a specific piece of code after identifying an issue).
With `one-mail-per-recipient` on (default):
- Sent mail to multiple users.
- Verified mail showed up in `mail list-outbound`.
- Examined mail with `mail show-outbound`.
- Added a project that a subscriber could not see.
- Verified it was not present in `X-Phabricator-Projects`.
- Verified it was rendered as "Restricted Project" for the non-permissioned viewer.
- Added a subscriber, then changed the object policy so they could not see it and sent mail.
- Verified I received mail but the other user did not.
- Enabled public replies and verified mail generated with public addresses.
- Disabld public replies and verified mail generated with private addresses.
With `one-mail-per-recipient` off:
- Verified that one mail is sent to all recipients.
- Verified users who can not see the object are still filtered.
- Verified that partially-visible projects are completely visible in the mail (this violates policies, as documented, as the best available compromise).
- Enabled public replies and verified the mail generated with "Reply To".
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: carlsverre, epriestley
Maniphest Tasks: T6367
Differential Revision: https://secure.phabricator.com/D13131
Summary:
Ref T8387. This describes changes I haven't made yet, but plan to make.
Also removes the long-deprecated actAsUser capability so I can remove the caveat about it from the documentation.
Test Plan: `grep`, reading
Reviewers: btrahan, eadler
Reviewed By: btrahan, eadler
Subscribers: eadler, epriestley
Maniphest Tasks: T8387
Differential Revision: https://secure.phabricator.com/D13120
Summary: Ref T8099. Adds back basic header color options, which change the logo color instead. Also RAINBOW.
Test Plan:
tested each of the new colors.
{F442284}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T8099
Differential Revision: https://secure.phabricator.com/D13040
Summary: Use `__CLASS__` instead of hard-coding class names. Depends on D12605.
Test Plan: Eyeball it.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: hach-que, Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D12806
Summary:
Ref T6930. This application collects and displays performance samples -- roughly, things Phabricator spent some kind of resource on. It will collect samples on different types of resources and events:
- Wall time (queries, service calls, pages)
- Bytes In / Bytes Out (requests)
- Implicit requests to CSS/JS (static resources)
I've started with the simplest case (static resources), since this can be used in an immediate, straghtforward way to improve packaging (look at which individual files have the most requests recently).
There's no aggregation yet and a lot of the data isn't collected properly. Future diffs will add more dimension data (controllers, users), more event and resource types (queries, service calls, wall time), and more display options (aggregation, sorting).
Test Plan: {F389344}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6930
Differential Revision: https://secure.phabricator.com/D12623
Summary:
Ref T5501. Currently, we emit some bad warnings about, e.g., "apc.stat" on PHP 5.5+ systems with OPcache, where the warnings are not relevant.
Generate and raise warnings out of the CacheSpec pipeline so we only run relevant code.
Test Plan: Faked various warnings and saw them render correctly.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5501
Differential Revision: https://secure.phabricator.com/D12318
Summary: Fixes T7764. These settings have low utility, are no longer used by default, have become less useful on modern Windows which has a better selection of available fonts, and will eventually be subsumed (at least, for the most part) by T4103.
Test Plan:
- Grepped for strings.
- Viewed settings.
- Changed font to "24px impact".
- Viewed diffs with default and custom font.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: chad, epriestley
Maniphest Tasks: T7764
Differential Revision: https://secure.phabricator.com/D12301
Summary:
Ref T7199. These were a bad idea which got copy-pasted a bunch.
- There is zero reason to ever set these to different things.
- Unsurprisingly, I don't know of any install which has them set to different things.
Unless I've completely forgotten about it, this option was not motivated by some obscure business need, it was just a bad decision which didn't catch anyone's attention at the time.
We partially remedied the mistake at some point by introducing `metamta.reply-handler-domain`, which works as a default for all applications, but never cleaned this mess up.
Test Plan: Sent some mail from applications, verified it picked up appropraite reply handler domains.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7199
Differential Revision: https://secure.phabricator.com/D12231
Summary:
Ref T7199. Although this is useful for discovery, it's un-useful enough that we already have an option to disable it, and most applications do not provide any meaningful instructions.
Throwing it away makes it easier to move forward and lets us get rid of a config option.
This is becoming a more advanced/power-user feature anyway, and the new syntax will be significantly more complex and hard to explain with a one-liner. I'm currently thinking that I'll maybe make the "help" menu a dropdown and give it some options like:
+---+
| O |
+---+---------------------+
| Maniphest Documentation |
| Maniphest Email Actions |
+-------------------------+
Then you click the "Email Actions" thing and get a runtime-derived list of available options. Not sure if I'll actually build that, but I think we can fairly throw the in-mail instructions away even if we don't go in that specific direction.
Test Plan: Grepped for `replyHandlerInstructions`, got no hits.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7199
Differential Revision: https://secure.phabricator.com/D12229
Summary:
Ref T6755. This is a partial fix, but:
- Allow netblocks to be blacklisted instead of making the feature all-or-nothing.
- Default to disallow requests to all reserved private/local/special IP blocks. This should generally be a "safe" setting.
- Explain the risks better.
- Improve the errors rasied by Macro when failing.
- Removed `security.allow-outbound-http`, as it is superseded by this setting and is somewhat misleading.
- We still make outbound HTTP requests to OAuth.
- We still make outbound HTTP requests for repositories.
From a technical perspective:
- Separate URIs that are safe to link to or redirect to (basically, not "javascript://") from URIs that are safe to fetch (nothing in a private block).
- Add the default blacklist.
- Be more careful with response data in Macro fetching, and don't let the user see it if it isn't ultimately valid.
Additionally:
- I want to do this check before pulling repositories, but that's enough of a mess that it should go in a separate diff.
- The future implementation of T4190 needs to perform the fetch check.
Test Plan:
- Fetched a valid macro.
- Fetched a non-image, verified it didn't result in a viewable file.
- Fetched a private-ip-space image, got an error.
- Fetched a 404, got a useful-enough error without additional revealing response content (which is usually HTML anyway and not useful).
- Fetched a bad protocol, got an error.
- Linked to a local resource, a phriction page, a valid remote site, all worked.
- Linked to private IP space, which worked fine (we want to let you link and redierect to other private services, just not fetch them).
- Added and executed unit tests.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6755
Differential Revision: https://secure.phabricator.com/D12136
Summary:
Ref T7522. This is mostly useful in the cluster, but could be useful for external installs too.
If you want to import an instance into a test/dry-run state (in the cluster, to test an import; in the general case, to do something like test new hardware or configuration), you currently risk spamming users with a lot of duplicate notifications. In particular, if Phabricator tracks remotes, both instances will continue importing commits and sending email about them. Both instances will try to publish to mirrors, too, which could be bad news, and both instances will try to update linked services.
Instead, provide a flag to let an instance run in "silent mode", which disables all outbound messaging and data.
We need to remember to support this flag on any new outbound channels, but we add about one of those per year so I think that's reasonable.
Test Plan:
- Flipped config.
- Saw it void email, feed and mirroring.
- Didn't test SMS since it's not really in use yet and not convenient to test.
- (Can you think of any publishing I missed?)
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7522
Differential Revision: https://secure.phabricator.com/D12109
Summary: In D11722, a `getGroup()` method was added to all subclasses of `PhabricatorApplicationConfigOptions`, but no abstract method was added to the base class. This will fail if a custom `*ConfigOptions` class does not provide a `getGroup()` method, in which case `$group->getGroup()` (in `PhabricatorConfigListController`) will fatal.
Test Plan: N/A
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11756
Summary: This diff moves the default monospace font from a Global Default config value to CSS. What this will allow is some flexibility in changing this font in other areas (like Diviner and DocumentView) without changing the defaults globally. However if the admin sets a config value or a user sets a config value, that value will trump all settings in the CSS files with an !important declaration in the page head.
Test Plan:
Currently tested:
- Setting no value
- Setting an admin value
- Setting a user value
Verify remarkup blocks in Differential, Diviner, Conpherence, and Diffusion look as expected.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11597
Summary: Moves the setting from Core to UI, also adds a link to the task for further instructions.
Test Plan: Load up config in sandbox, see new instructions.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T4214
Differential Revision: https://secure.phabricator.com/D11900
Summary: Fixes T7165. Let users specify a file phid in config, and then use that file via an inline style tag. Also, cache the URI so that we don't have to query the file on every page load.
Test Plan: {F319050}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7165
Differential Revision: https://secure.phabricator.com/D11886
Summary: Ref T7352. This is pretty straightforward. I renamed `phd.start-taskmasters` to `phd.taskmasters` for clarity.
Test Plan:
- Ran `phd start`, `phd start --autoscale-reserve 0.25`, `phd restart --autoscale-reserve 0.25`, etc.
- Examined PID file to see options were passed.
- I'm defaulting this off (0 reserve) and making it a flag rather than an option because it's a very advanced feature which is probably not useful outside of instancing.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7352
Differential Revision: https://secure.phabricator.com/D11871
Summary:
Ref T6840. This feels a little dirty; open to alternate suggestions.
We currently have a race condition where multiple daemons may load a commit and then save it at the same time, when processing "reverts X" text. Prior to this feature, two daemons would never load a commit at the same time.
The "reverts X" load/save has no effect (doesn't change any object properties), but it will set the state back to the loaded state on save(). This overwrites any flag updates made to the commit in the meantime, and can produce the race in T6840.
In other cases (triggers, harbormaster, repositories) we deal with this kind of problem with "append-only-updates + single-consumer", or a bunch of locking. There isn't really a good place to add a single consumer for commits, since a lot of daemons need to access them. We could move the flags column to a separate table, but this feels pretty complicated. And locking is messy, also mostly because we have so many consumers.
Just exempting this column (which has unusual behavior) from `save()` feels OK-ish? I don't know if we'll have other use cases for this, and I like it even less if we never do, but this patch is pretty small and feels fairly understandable (that said, I also don't like that it can make some properties just silently not update if you aren't on the lookout).
So, this is //a// fix, and feels simplest/least-bad for the moment to me, I thiiink.
Test Plan: Added and executed unit tests.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6840
Differential Revision: https://secure.phabricator.com/D11822
Summary:
Ref T4340. The attack this prevents is:
- An adversary penetrates your network. They acquire one of two capabilities:
- Your server is either configured to accept both HTTP and HTTPS, and they acquire the capability to observe HTTP traffic.
- Or your server is configured to accept only HTTPS, and they acquire the capability to control DNS or routing. In this case, they start a proxy server to expose your secure service over HTTP.
- They send you a link to `http://secure.service.com` (note HTTP, not HTTPS!)
- You click it since everything looks fine and the domain is correct, not noticing that the "s" is missing.
- They read your traffic.
This is similar to attacks where `https://good.service.com` is proxied to `https://good.sorvace.com` (i.e., a similar looking domain), but can be more dangerous -- for example, the browser will send (non-SSL-only) cookies and the attacker can write cookies.
This header instructs browsers that they can never access the site over HTTP and must always use HTTPS, defusing this class of attack.
Test Plan:
- Configured HTTPS locally.
- Accessed site over HTTP (got application redirect) and HTTPS.
- Enabled HSTS.
- Accessed site over HTTPS (to set HSTS).
- Tore down HTTPS part of the server and tried to load the site over HTTP. Browser refused to load "http://" and automatically tried to load "https://". In another browser which had not received the "HSTS" header, loading over HTTP worked fine.
- Brought the HTTPS server back up, things worked fine.
- Turned off the HSTS config setting.
- Loaded a page (to set HSTS with expires 0, diabling it).
- Tore down the HTTPS part of the server again.
- Tried to load HTTP.
- Now it worked.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4340
Differential Revision: https://secure.phabricator.com/D11820
Summary:
Ref T7185. These settings shouldn't be unlocked anywhere. Specifically:
- `reply-handler`: These are on the way out.
- `reply-handler-domain`: Also hopefully on the way out; locked because a compromised administrator account can redirect replies.
- `phabricator.cookie-prefix`: Not dangerous per se, but an admin could have a hard time fixing this if they changed it by accident since their session would become invalid immediately.
Test Plan: Browsed Config.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7185
Differential Revision: https://secure.phabricator.com/D11764
Summary:
Ref T7185. We currently have "locked", "masked", and "hidden" config.
However, "masked" does not really do anything. It was intended to mask values in DarkConsole, but Config got built out instead and "hidden" is strictly better in modern usage and protects against compromised administrator accounts. "hidden" implies "locked", so it's now strictly more powerful than just locked.
Remove "masked" and upgrade all "masked" config to "hidden". In particular, this hides some API keys and secret keys much more aggressively in Config, which is desirable.
Test Plan: Browsed things like S3 API keys in config and could no longer see them.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7185
Differential Revision: https://secure.phabricator.com/D11763
