Summary: Ref T4324. Ref T5284. This adds server-side support for keeping track of a set of PHIDs that the Aphlict clients have subscribed to. Instead of broadcasting a notification to all clients (after which the clients can poll `/notification/individual` in order to determine whether or not they are interested in the notification), transmit notifications only to clients that have subscribed to a PHID that is relevant to the notification.
Test Plan:
I opened up two clients on the same host (incognito tabs in Chrome). Here is the output from the server:
```
> sudo ./bin/aphlict debug
Starting Aphlict server in foreground...
Launching server:
$ 'nodejs' '/usr/src/phabricator/src/applications/aphlict/management/../../../../support/aphlict/server/aphlict_server.js' --port='22280' --admin='22281' --host='localhost' --user='aphlict'
[Wed Jun 11 2014 19:10:27 GMT+0000 (UTC)] Started Server (PID 4546)
[Wed Jun 11 2014 19:10:36 GMT+0000 (UTC)] <FlashPolicy> Policy Request From ::ffff:192.168.1.1
[Wed Jun 11 2014 19:10:37 GMT+0000 (UTC)] <Listener/1> Connected from ::ffff:192.168.1.1
[Wed Jun 11 2014 19:10:37 GMT+0000 (UTC)] <Listener/1> Received data: {"command":"subscribe","data":["PHID-USER-cb5af6p4oepy5tlgqypi"]}
[Wed Jun 11 2014 19:10:37 GMT+0000 (UTC)] <Listener/1> Subscribed to: ["PHID-USER-cb5af6p4oepy5tlgqypi"]
[Wed Jun 11 2014 19:10:39 GMT+0000 (UTC)] <Listener/1> Received data: {"command":"subscribe","data":["PHID-USER-kfohe3ca5oe6ygykmioq"]}
[Wed Jun 11 2014 19:10:39 GMT+0000 (UTC)] <Listener/1> Subscribed to: ["PHID-USER-kfohe3ca5oe6ygykmioq"]
[Wed Jun 11 2014 19:10:42 GMT+0000 (UTC)] notification: {"key":"6023751084283587681","type":"notification","subscribers":["PHID-USER-cb5af6p4oepy5tlgqypi"]}
[Wed Jun 11 2014 19:10:42 GMT+0000 (UTC)] <Listener/1> Wrote Message
```
I verified (using the "Network" tab in Chrome) that an AJAX request to `/notification/individual/` was only made in the tab belonging to the user that triggered the test notification.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Maniphest Tasks: T5284, T4324
Differential Revision: https://secure.phabricator.com/D9458
Summary: Printing out `err` is less informative than `err.stack`, which has the message, type, //and// a trace.
Test Plan:
Faked an exception, then:
```
$ sudo ./bin/aphlict debug
Starting Aphlict server in foreground...
Launching server:
$ 'node' '/INSECURE/devtools/phabricator/src/applications/aphlict/management/../../../../support/aphlict/server/aphlict_server.js' --port='22280' --admin='22281' --host='localhost'
[Wed Jun 11 2014 10:20:39 GMT-0700 (PDT)]
<<< UNCAUGHT EXCEPTION! >>>
Error: Example Exception
at Object.<anonymous> (/INSECURE/devtools/phabricator/support/aphlict/server/aphlict_server.js:73:7)
at Module._compile (module.js:456:26)
at Object.Module._extensions..js (module.js:474:10)
at Module.load (module.js:356:32)
at Function.Module._load (module.js:312:12)
at Function.Module.runMain (module.js:497:10)
at startup (node.js:119:16)
at node.js:901:3
>>> Server exited!
```
Reviewers: joshuaspence
Reviewed By: joshuaspence
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D9481
Summary:
Currently, the Aphlict server will crash if invalid JSON data is `POST`ed to it. I have fixed this to, instead, return a 400. Also made some minor formatting changes.
Ref T4324. Ref T5284. Also, modify the data structure that is passed around (i.e. `POST`ed to the Aphlict server and broadcast to the Aphlict clients) to include the subscribers. Initially, I figured that we shouldn't expose this information to the clients... however, it is necessary for T4324 that the `AphlictMaster` is able to route a notification to the appropriate clients.
Test Plan:
Making the following `curl` request: `curl --data "{" http://localhost:22281/`.
**Before**
```
sudo ./bin/aphlict debug
Starting Aphlict server in foreground...
Launching server:
$ 'nodejs' '/usr/src/phabricator/src/applications/aphlict/management/../../../../support/aphlict/server/aphlict_server.js' --port='22280' --admin='22281' --host='localhost' --user='aphlict'
[Wed Jun 11 2014 17:07:51 GMT+0000 (UTC)] Started Server (PID 2033)
[Wed Jun 11 2014 17:07:55 GMT+0000 (UTC)]
<<< UNCAUGHT EXCEPTION! >>>
SyntaxError: Unexpected end of input
>>> Server exited!
```
**After**
(No output... the bad JSON is caught and a 400 is returned)
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4324, T5284
Differential Revision: https://secure.phabricator.com/D9480
Summary: Ran `arc lint --apply-patches --everything` over rP, mainly to change double quotes to single quotes where appropriate. These changes also validate that the `ArcanistXHPASTLinter::LINT_DOUBLE_QUOTE` rule is working as expected.
Test Plan: Eyeballed it.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D9431
Summary: Currently, any error thrown when instantiating an `AphlictMaster` will be assumed to be due to the master already existing. This is a bit overzealous because the [[http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/net/LocalConnection.html#connect() | documentation]] specifically states than an `ArgumentError` will be throw if "the `LocalConnection` instance is already connected".
Test Plan: Inspected the log message.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9422
Summary: These methods shouldn't be overridden. Marking them as `final` will enforce this.
Test Plan: N/A
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9411
Summary:
Currently, it is a bit tricky to build the Aphlict client SWF from the ActionScript source. Provide a `./bin/aphlict build` workflow that simplifies this process.
Depends on D9226.
Test Plan:
Executed the workflow:
```
> ./bin/aphlict build
Done.
```
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9338
Summary: Fixes T5126. Provide `start`, `stop`, `restart`, `debug` and `status` workflows for `./bin/aphlict`. This makes it easier to manage Aphlict as if it were a service.
Test Plan:
```
> sudo ./bin/aphlict status
Aphlict is not running.
> sudo ./bin/aphlict stop
Aphlict is not running.
> sudo ./bin/aphlict start
Aphlict Server started.
> sudo ./bin/aphlict status
Aphlict (12880) is running.
> sudo ./bin/aphlict restart
Stopping Aphlict Server (12880)...
Aphlict Server (12880) exited normally.
Aphlict Server started.
> sudo ./bin/aphlict stop
Stopping Aphlict Server (12895)...
Aphlict Server (12895) exited normally.
> sudo ./bin/aphlict debug
Starting Aphlict server in foreground...
Launching server:
$ node '/usr/src/phabricator/src/applications/aphlict/management/../../../../support/aphlict/server/aphlict_server.js' --port='22280' --admin='22281' --host='localhost' --user='aphlict'
[Fri May 30 2014 09:56:14 GMT+0000 (UTC)] Started Server (PID 12911)
```
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: hach-que, epriestley, Korvin
Maniphest Tasks: T5126
Differential Revision: https://secure.phabricator.com/D9226
Summary:
Ref T4324. As well as sending the key for the notification, also publish the notification type and a list of subscribers to the Aphlict server.
The idea here is that the Aphlict server passes anything within the `data` key to the clients, whereas other keys (such as `subscribers`) will be used by the server to determine where the notifications should be routed.
Note that these changes don't do anything useful, but are a prerequisite for further work on T4324.
Test Plan:
Sent myself test notifications at `/notification/status/`. Also inspected the Aphlict server debug output:
```
> sudo ./bin/aphlict --foreground
Starting server in foreground, ignoring pidfile...
Launching server:
$ node '/usr/src/phabricator/support/aphlict/server/aphlict_server.js' --port='22280' --admin='22281' --host='localhost' --user='aphlict' --log='/var/log/aphlict.log'
[Thu Jun 05 2014 18:38:14 GMT+0000 (UTC)] Started Server (PID 15437)
[Thu Jun 05 2014 18:38:16 GMT+0000 (UTC)] <FlashPolicy> Policy Request From ::ffff:10.0.0.1
[Thu Jun 05 2014 18:38:16 GMT+0000 (UTC)] <Listener/1> Connected from ::ffff:10.0.0.1
[Thu Jun 05 2014 18:38:19 GMT+0000 (UTC)] notification: {"data":{"key":"6021516228036848559","type":"notification"},"subscribers":["PHID-USER-cb5af6p4oepy5tlgqypi"]}
[Thu Jun 05 2014 18:38:19 GMT+0000 (UTC)] <Listener/1> Wrote Message
```
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Maniphest Tasks: T4324
Differential Revision: https://secure.phabricator.com/D9396
Summary:
Ref T4324. Currently, notifications data is `POST`ed to the Aphlict server in the `application/x-www-form-urlencoded` format. This works fine for simple data but is problematic for nested data. For example:
```lang=php
array(
'data' => array(
'key' => '6021329908492455737',
'type' => 'PhabricatorNotificationAdHocFeedStory',
),
'subscribers' => array(
'PHID-USER-y7ofqm276ejs62yqghge',
),
);
```
Is encoded as `data%5Bkey%5D=6021329908492455737&data%5Btype%5D=PhabricatorNotificationAdHocFeedStory&subscribers%5B0%5D=PHID-USER-y7ofqm276ejs62yqghge`. This string is then (incorrectly) decoded by `querystring.parse` as:
```lang=javascript
> querystring.parse('data%5Bkey%5D=6021329908492455737&data%5Btype%5D=PhabricatorNotificationAdHocFeedStory&subscribers%5B0%5D=PHID-USER-y7ofqm276ejs62yqghge');
{ 'data[key]': '6021329908492455737',
'data[type]': 'PhabricatorNotificationAdHocFeedStory',
'subscribers[0]': 'PHID-USER-y7ofqm276ejs62yqghge' }
```
Test Plan: Sent test notifications from `/notification/status/` and verified that the notifications still worked.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4324
Differential Revision: https://secure.phabricator.com/D9386
Summary: Ref T4324. Currently, if the `AphlictMaster` receives dodgy data from the Aphlict server (invalid JSON, for example) then a syntax error will be thrown and the `AphlictMaster` will die. Instead, catch errors and raise a notification.
Test Plan: {F163466}
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4324
Differential Revision: https://secure.phabricator.com/D9380
Summary:
Strict mode is enabled by default, but it would be best to explicitly enable it... just in case.
Strict mode prints undefined property and function calls; also performs compile-time type checking on assignments and options supplied to method calls. See http://help.adobe.com/en_US/flex/using/WS2db454920e96a9e51e63e3d11c0bf69084-7a92.html
Test Plan: N/A
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9354
Summary: These settings don't seem to make any difference and are somewhat confusing.
Test Plan: Sent myself test notifications via `/notification/status`. Things seemed to work.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9337
Summary:
Ref T4324. Currently, an Aphlict client (with a corresponding connection to the Aphlict Server) is created for every tab that a user has open. This significantly affects the scalability of Aphlict as a service. Instead, we can use `LocalConnection` instances to coordinate the communication of multiple Aphlict clients to the server.
Similar functionality existed prior to D2704, but was removed as the author was not able to get this functionality working as intended. It seems that the main issue with the initial attempt was the use of the `setTimeout` function, which seemed to be a blocking call which prevented messages from being received. I have instead used an event-based model using a `Timer` object.
Roughly this works as follows:
# The first instance will create an `AphlictClient` and an `AphlictMaster`. The `AphlictClient` will register itself with the `AphlictMaster` and will consequently be notified of incoming messages.
# The `AphlictClient` is then responsible for pinging the `AphlictMaster` at regular intervals. If the client does not ping the master in a given period of time, the master will assume that the client is dead and will remove the client from the pool.
# Similarly, the `AphlictMaster` is required to respond to pings with a "pong" response. The pong response lets the clients know that the `AphlictMaster` is still alive. If the clients do not receive a pong in a given period of time, then the clients will attempt to spawn a new master.
Test Plan: I have tested this on our Phabricator install with a few tabs opened and inspecting the console output. I will upload a screencast of my test results.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4324
Differential Revision: https://secure.phabricator.com/D9327
Summary: This is still too rough to enable by default. We can turn it on for `secure.phabricator.com` and tweak it a bit first, and then release it in general with higher defaults and more sensible behavior in edge cases.
Test Plan: Loaded some pages.
Reviewers: btrahan, spicyj
Reviewed By: spicyj
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8736
Summary:
Fixes T3923. On `secure.phabricator.com`, we occasionally get slowed to a crawl when someone runs a security scanner against us, or 5 search bots decide to simultaneously index every line of every file in Diffusion.
Every time a user makes a request, give their IP address some points. If they get too many points in 5 minutes, start blocking their requests automatically for a while.
We give fewer points for logged in requests. We could futher refine this (more points for a 404, more points for a really slow page, etc.) but let's start simply.
Also, provide a mechanism for configuring this, and configuring the LB environment stuff at the same time (this comes up rarely, but we don't have a good answer right now).
Test Plan: Used `ab` and reloading over and over again to hit rate limits. Read documentation.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: chad, epriestley
Maniphest Tasks: T3923
Differential Revision: https://secure.phabricator.com/D8713
Summary: Ref T4324. One of the server we start just sends pre-canned XML responses. Separate it out of the main file and hand it all the objects it interacts with in structured, reasonable ways.
Test Plan: Hit "Send Test Notification", saw notification, saw flash policy info in the log.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4324
Differential Revision: https://secure.phabricator.com/D8257
Summary:
Ref T4324.
- Create `Listener` to represent listening clients.
- Create `ListenerList` to represent the current list of clients.
- Create `Logfile` to handle logging.
Test Plan: Clicked "Send Test Notification", verified logs, status and notifications all work correctly.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4324
Differential Revision: https://secure.phabricator.com/D8256
Summary:
Ref T4324. The server code is probably going to get a fair amount more complicated, so allow it to load Javelin classes in a mostly-reasonable way.
This integration has a few warts, but should be good enough to let us manage complexity through the next iteration of the server.
(Mostly I just want the concicse Javelin mechanism for defining new classes.)
Version bump is just so I can figure stuff out if this creates any issues for users based on which version of things they're running.
Test Plan: Started server, posted some messages through it.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4324
Differential Revision: https://secure.phabricator.com/D8253
Summary: Ref T4324. Add some version information to the server status output, and setup checks to test for an unreachable or out-of-date server.
Test Plan:
- With server down, hit reasonable setup check.
- With server up and at a bad version, hit reasonable setup check.
- Viewed `/notification/status/`.
- The CSS thing fixes this:
{F114445}
Reviewers: btrahan, chad
Reviewed By: chad
CC: chad, aran
Maniphest Tasks: T4324
Differential Revision: https://secure.phabricator.com/D8251
Summary: See D8049. Same deal as that one, but this is in the Phabricator web stack.
Test Plan: Man oh man.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D8050
Summary:
See <https://github.com/facebook/phabricator/issues/487>. If an exception is thrown too high in the stack for the main exception handling to deal with it, we currently never report a stack trace. Instead:
- Always report a stack trace to the error log.
- With developer mode, also report a stack trace to the screen.
Test Plan: Added a high-level `throw` and hit both cases. Got traces in the log and traces-under-developer-mode on screen.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D8022
Summary: Ref T3684 for discussion. This could be cleaned up a bit (it would be nice to draw entropy once per request, for instance, and maybe respect CSRF_TOKEN_LENGTH more closely) but should effectively mitigate BREACH.
Test Plan: Submitted forms; submitted forms after mucking with CSRF and observed CSRF error. Verified that source now has "B@..." tokens.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3684
Differential Revision: https://secure.phabricator.com/D6686
Summary: Ensures that weird behavior from filter_input_array does not remove keys from superglobals. Should fix T3677.
Test Plan:
Checked that $_SERVER contained same number of keys before and after
filtering, and that those affected by the original bug continue to be filtered
correctly.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: zorfling, aran, Korvin, wez
Maniphest Tasks: T3677
Differential Revision: https://secure.phabricator.com/D6680
Summary:
Fixes issue where double-encoding of $_SERVER occurs when php.ini forces all input to be sanitized
Ex:
filter.default = full_special_chars
filter.default_flags = 36
Fix line length
Test Plan: Encountered issue on clean install when registring new user (phusr not defined for email verification). php.ini on that server contains above filter settings. nginx/php-fpm with recommended settings for that server block from setup guide.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D6672
Summary:
These versions are broken, but package distros seem to be picking them up. :/
Since the error you get is completely useless, fatal immediately with a useful message.
Ref T2594.
Test Plan: Faked verisions and hit the issue.
Reviewers: btrahan
Reviewed By: btrahan
CC: brennantaylor, Arijit, aran
Maniphest Tasks: T2594
Differential Revision: https://secure.phabricator.com/D6415
Summary:
D6278 kind of got closed and commited, this is the actual direction.
Ref T3432
Depends on D6277
Test Plan: Keep using the site
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin, mbishopim3
Maniphest Tasks: T3432
Differential Revision: https://secure.phabricator.com/D6283
Summary: Fixes T2965, see that task for discussion. This is dumb but seems like our best bet.
Test Plan:
- Installed newish version of Git.
- Set HOME on the websever to `/var/root` (or any other unreadable directory).
- Hit the error described in T2965 when viewing Diffusion.
- Applied this patch.
- Diffusion works.
Reviewers: btrahan, joel
Reviewed By: btrahan
CC: aran, chad
Maniphest Tasks: T2965
Differential Revision: https://secure.phabricator.com/D5994
Summary: If `jsxmin` is not available, use a pure PHP implementation instead (JsShrink).
Test Plan:
- Ran `arc lint --lintall` on all JS and fixed every relevant warning.
- Forced minification on and browsed around the site using JS behaviors. Didn't hit anything problematic.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5670
Summary: See D5874. PhutilDeferredLog's exception on `write()`/`__destruct()` is not especially important and can come at an awkward time. Instead of throwing, just emit an error message to the log.
Test Plan: Faked failed writes and saw an error message in the log instead of many terrible things everywhere.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3144
Differential Revision: https://secure.phabricator.com/D5875
Summary: At some point, Node started requiring us to read data before we can get the 'end' event, it seems. Fixes T2953.
Test Plan: Ran server in `--foreground` mode on node v0.11.0, made request to `/status/`, got response.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2953
Differential Revision: https://secure.phabricator.com/D5666
Summary: Fixes T2930. We may not have an access log here yet -- I got a little too overeager with D5533.
Test Plan:
Faked gpc quotes and got a nice error instead of a blank screen:
{F39821}
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T2930
Differential Revision: https://secure.phabricator.com/D5630
Summary:
See D5561. Ref T2378.
- Add `support/bin/*` to .gitignore so any symlinks or binaries won't get picked up by Git.
- Add a README so Git preserves the directory and there's at least //some// documentation of its existence.
Test Plan: ummmmm
Reviewers: jevripio, codeblock, btrahan
Reviewed By: jevripio
CC: aran
Maniphest Tasks: T2378
Differential Revision: https://secure.phabricator.com/D5562
Summary:
We have a fair number of conditionals on the existence of the access log. Instead, always build it and just don't write it if the user doesn't want a version on disk.
Also, formalize logged-in user PHID (avoids object existence juggling) in the access log and move microseconds-since-startup to PhabricatorStartup (simplifies index.php).
Depends on D5532. Fixes T2860. Ref T2870.
Test Plan: Disabled access log, verified XHProf writes occurred correctly.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2860, T2870
Differential Revision: https://secure.phabricator.com/D5533
Summary:
The fixed-position side nav background thing tends to make looking at print_r() output hard. Also, it breaks Ajax, etc.
- Loudly call out unexpected output on normal pages, to catch extra spaces before `<?php`, etc.
- Display unexpected output in an attractive panel on normal pages.
- Log unexpected output instead of breaking Ajax.
Test Plan:
{F32267}
Also triggered various fatals and verified they still show the right messages (no blank pages).
Reviewers: vrana, btrahan, chad
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D4892
Summary: This particular misconfiguration results in a difficult-to-debug redirect loop, so stop it early.
Test Plan: Broke my rewrite rule, verified I got yelled at.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D4591
Summary:
We have a bunch of code duplication now between __init_script__.php and webroot/index.php. Consoldiate these methods and move them into PhabricatorEnv.
Merge PhabricatorRequestOverseer into PhabricatorStartup.
Test Plan: Loaded page, ran script. Wiped PHABRICATOR_ENV; loaded page, ran script; got errors.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2223
Differential Revision: https://secure.phabricator.com/D4283
Summary:
We have a lot of mess to get through before we can load libphutil and enter Phabricator code properly. Move it to a dedicated class.
I'm probably going to merge PhabricatorRequestOverseer into this, although the check that lives there now is kind of weird. It also does not really need to be a pre-load check and could be handled better.
I stopped shoving stuff in here once I got to ENV stuff, I'm going to tackle that next.
Test Plan: Ran phabricator normally; introduced fatals and misconfigurations. Grepped for changed symbols.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran, asherkin
Maniphest Tasks: T2223
Differential Revision: https://secure.phabricator.com/D4282
Summary: We allow user to specify the host to listen to but we listen on 127.0.0.1 instead.
Test Plan:
Hardcoded the path and verified that I can connect to the host from other machine.
Verified that `localhost` still doesn't allow remote connections.
Reviewers: ddfisher, epriestley, nh
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4238
Summary:
This commit doesn't change license of any file. It just makes the license implicit (inherited from LICENSE file in the root directory).
We are removing the headers for these reasons:
- It wastes space in editors, less code is visible in editor upon opening a file.
- It brings noise to diff of the first change of any file every year.
- It confuses Git file copy detection when creating small files.
- We don't have an explicit license header in other files (JS, CSS, images, documentation).
- Using license header in every file is not obligatory: http://www.apache.org/dev/apply-license.html#new.
This change is approved by Alma Chao (Lead Open Source and IP Counsel at Facebook).
Test Plan: Verified that the license survived only in LICENSE file and that it didn't modify externals.
Reviewers: epriestley, davidrecordon
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2035
Differential Revision: https://secure.phabricator.com/D3886
Summary:
Lower the barrier to entry for installing and creating skins, so we can kill Wordpress. You can now install skins by dropping them into a directory, and build either "advanced" (full phutil library) skins or "basic" (simple PHP templates) skins.
Next up is getting static resources working in an easy way for skins.
I put these in `externals/` for now so they don't get hit by lint.
Test Plan: Viewed the Pokeblog with the Oblivious skin.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1373
Differential Revision: https://secure.phabricator.com/D3717
Summary: Depends on D2926. Adds a simple CLI client for Aphlict to make it easier to debug stuff.
Test Plan: Ran client, saw debug messages.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D2927
Summary: Add a `notification.debug` setting that shows debug info in the browser. Also improve some logging/error handling stuff and fix a bug with host names.
Test Plan: {F13098}
Reviewers: jungejason, btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T944
Differential Revision: https://secure.phabricator.com/D2810
