Summary:
We're sometimes getting duplicate notifications right now. I think this is because multiple windows are racing and becoming leaders.
Clean this up a little:
- Fix the `timeoout` typo.
- Only try to usurp once.
- Use different usurp and expire delays, so we don't fire them at the exact same time.
Not sure if this'll work or not but it should theoretically be a little cleaner.
Test Plan:
- Quit Safari, reopened Safari, still saw a fast reconnect to the notification server (this is the goal of usurping).
- Did normal notification stuff like opening a chat in two windows, got notifications.
- Hard to reproduce the race for sure, but this at least fixes the outright `timeoout` bug.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15806
Summary:
Fixes T10778. This is a result of T10262: when we save a form configuration and adjust the policy, we try to scramble attached file secrets.
There aren't going to be any attached files, but there's also no edge table, so we fail.
We could skip this code, but we'll likely need an edge table here sooner or later so it's probably simpler in the long run to just add an empty one.
Test Plan:
- Ran `bin/storage upgrade`, got a clean bill of health.
- Saved a form configuration after making a policy edit, no more `edge` exception.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10778
Differential Revision: https://secure.phabricator.com/D15803
Summary:
Ref T10866. Fixes T10386. This attempts to make it a little more plausible to follow these directions:
- Use simpler language in general.
- Remove language suggesting that HTTP requires no additional configuration.
- Suggest using a load balancer or an ugly port number instead of swapping SSH to a different port.
- Be more granular about `sudo` setup.
- Organize better?
Test Plan: Read documentation.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10386, T10866
Differential Revision: https://secure.phabricator.com/D15796
Summary:
Ref T10860. This allows us to recover if the connection to the database is lost during a push.
If we lose the connection to the master database during a push, we would previously freeze the repository. This is very safe, but not very operator-friendly since you have to go manually unfreeze it.
We don't need to be quite this aggressive about freezing things. The repository state is still consistent after we've "upgraded" the lock by setting `isWriting = 1`, so we're actually fine even if we lost the global lock.
Instead of just freezing the repository immediately, sit there in a loop waiting for the master to come back up for a few minutes. If it recovers, we can release the lock and everything will be OK again.
Basically, the changes are:
- If we can't release the lock at first, sit in a loop trying really hard to release it for a while.
- Add a unique lock identifier so we can be certain we're only releasing //our// lock no matter what else is going on.
- Do the version reads on the same connection holding the lock, so we can be sure we haven't lost the lock before we do that read.
Test Plan:
- Added a `sleep(10)` after accepting the write but before releasing the lock so I could run `mysqld stop` and force this issue to occur.
- Pushed like this:
```
$ echo D >> record && git commit -am D && git push
[master 707ecc3] D
1 file changed, 1 insertion(+)
# Push received by "local001.phacility.net", forwarding to cluster host.
# Waiting up to 120 second(s) for a cluster write lock...
# Acquired write lock immediately.
# Waiting up to 120 second(s) for a cluster read lock on "local001.phacility.net"...
# Acquired read lock immediately.
# Device "local001.phacility.net" is already a cluster leader and does not need to be synchronized.
# Ready to receive on cluster host "local001.phacility.net".
Counting objects: 3, done.
Delta compression using up to 8 threads.
Compressing objects: 100% (2/2), done.
Writing objects: 100% (3/3), 254 bytes | 0 bytes/s, done.
Total 3 (delta 1), reused 0 (delta 0)
BEGIN SLEEP
```
- Here, I stopped `mysqld` from the CLI in another terminal window.
```
END SLEEP
# CRITICAL. Failed to release cluster write lock!
# The connection to the master database was lost while receiving the write.
# This process will spend 300 more second(s) attempting to recover, then give up.
```
- Here, I started `mysqld` again.
```
# RECOVERED. Link to master database was restored.
# Released cluster write lock.
To ssh://local@localvault.phacility.com/diffusion/26/locktopia.git
2cbf87c..707ecc3 master -> master
```
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10860
Differential Revision: https://secure.phabricator.com/D15792
Summary:
Ref T8952. Currently, when an application (most commonly Herald, but sometimes Drydock, Diffusion, etc) publishes a feed story, we get an empty grey box for it in feed.
Instead, give the story a little application icon kind of "profile picture"-like thing.
Test Plan:
Here's how it looks:
{F1239003}
Feel free to tweak/counter-diff.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8952
Differential Revision: https://secure.phabricator.com/D15773
Summary: Fixes T9295
Test Plan: Create event, open datepicker for start date, choose 1/31/2016, open datepicker again, click right button to scroll month. New suggested date should be 2/29/2016
Reviewers: chad, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T9295
Differential Revision: https://secure.phabricator.com/D15727
Summary:
Fixes T10840. When rendering mail, this rule wasn't falling through in quite the right way.
Also adjust where the rules are for this so the special styles show up in Maniphest, etc.
Test Plan:
Made this comment:
{F1238266}
Which produced this HTML:
{F1238267}
...and sent this mail:
{F1238283}
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T10840
Differential Revision: https://secure.phabricator.com/D15767
Summary: Ref T4292. When we write a push log, also log which node received the request.
Test Plan: {F1230467}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15759
Summary: Ref T4292. This will let the UI and future `bin/repository` tools give administrators more tools to understand problems when reporting or resolving them.
Test Plan:
- Pushed fully clean repository.
- Pushed previously-pushed repository.
- Forced write to abort, inspected useful information in the database.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15748
Summary:
Fixes T10830.
- The return code from `storage adjust` did not propagate correct.
- There was one column issue which I missed the first time around because I had a bunch of unrelated stuff locally.
Test Plan:
- Ran `bin/storage upgrade -f` with failures, used `echo $?` to make sure it exited nonzero.
- Got fully clean `bin/storage adjust` by dropping all my extra local tables.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10830
Differential Revision: https://secure.phabricator.com/D15746
Summary:
Fixes T10830. Ref T10366. I wasn't writing to this table yet so I didn't build it, but the fact that `bin/storage adjust` would complain slipped my mind.
- Add the table.
- Make the tests run `adjust`. This is a little slow (a few extra seconds) but we could eventually move some steps like this to run server-side only.
Test Plan: Ran `bin/storage upgrade -f`, got a clean `adjust`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10366, T10830
Differential Revision: https://secure.phabricator.com/D15744
Summary: Ref T7691 (errata). This shows links to Phriction documents in red if they're missing, and links to Phriction documents in grey with a lock icon if the user doesn't have the correct permissions to see the document.
Test Plan:
Tested a bunch of different configurations:
```
[[ ./../ ]] Back to Main Document
[[ ./../subdocument_2]] Mmmm more documents
[[ ./../invisible_document]] Mmmm more documents
[[ ./../ | Explicit Title ]] Back to Main Document
[[ ./../subdocument_2 | Explicit Title ]] Mmmm more documents
[[ ./../invisible_document | Explicit Title ]] Mmmm more documents
[[ ]] Absolute link
[[ subdocument_2 ]] Absolute link
[[ invisible_document ]] Absolute link
[[ | Explicit Title ]] Absolute link
[[ subdocument_2 | Explicit Title ]] Absolute link
[[ invisible_document | Explicit Title ]] Absolute link
```
Got the expected result:
{F1221106}
Reviewers: epriestley, chad, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T7691
Differential Revision: https://secure.phabricator.com/D15733
Summary: Fixes T9296
Test Plan: Create an event, change start time to `3PM`, end value should update to `4:00 PM`, not `4:0 PM`
Reviewers: chad, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T9296
Differential Revision: https://secure.phabricator.com/D15725
Summary: Fixes T10816. The way these work is a little unusual since these chunks of file-rendering code are unusuall performance-sensitive, so the Differential version doesn't adapt directly to Diffusion. Both can possibly be unified at some point in the future, although they do slightly different things.
Test Plan: {F1220170}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10816
Differential Revision: https://secure.phabricator.com/D15719
Summary:
Fixes T10697. This finishes bringing the rest of the config up to cluster power levels.
Phabricator is now given an arbitrarily long list of notification servers.
Each Aphlict server is given an arbitrarily long list of ports to run services on.
Users are free to make them meet in the middle by proxying whatever they want to whatever else they want.
This should also accommodate clustering fairly easily in the future.
Also rewrote the status UI and changed a million other things. 🐗
Test Plan:
{F1217864}
{F1217865}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10697
Differential Revision: https://secure.phabricator.com/D15703
Summary:
Ref T4292. This mostly implements the locking/versioning logic for multi-master repositories. It is only active on Git SSH pathways, and doesn't actually do anything useful yet: it just does bookkeeping so far.
When we read (e.g., `git fetch`) the logic goes like this:
- Get the read lock (unique to device + repository).
- Read all the versions of the repository on every other device.
- If any node has a newer version:
- Fetch the newer version.
- Increment our version to be the same as the version we fetched.
- Release the read lock.
- Actually do the fetch.
This makes sure that any time you do a read, you always read the most recently acknowledged write. You may have to wait for an internal fetch to happen (this isn't actually implemented yet) but the operation will always work like you expect it to.
When we write (e.g., `git push`) the logic goes like this:
- Get the write lock (unique to the repository).
- Do all the read steps so we're up to date.
- Mark a write pending.
- Do the actual write.
- Bump our version and mark our write finished.
- Release the write lock.
This allows you to write to any replica. Again, you might have to wait for a fetch first, but everything will work like you expect.
There's one notable failure mode here: if the network connection between the repository node and the database fails during the write, the write lock might be released even though a write is ongoing.
The "isWriting" column protects against that, by staying locked if we lose our connection to the database. This will currently "freeze" the repository (prevent any new writes) until an administrator can sort things out, since it'd dangerous to continue doing writes (we may lose data).
(Since we won't actually acknowledge the write, I think, we could probably smooth this out a bit and make it self-healing //most// of the time: basically, have the broken node rewind itself by updating from another good node. But that's a little more complex.)
Test Plan:
- Pushed changes to a cluster-mode repository.
- Viewed web interface, saw "writing" flag and version changes.
- Pulled changes.
- Faked various failures, got sensible states.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15688
Summary: Makes the fallback a little cleaner on long titles. Wow we have a lot of error states here.
Test Plan: New Milestone with no tasks.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15686
Summary:
Ref T4571. Allows users to click the "read-only mode" notification to get more information about why an install is in read-only mode.
Installs can be in this mode for several reasons (explicit administrative action, no masters defined, no masters reachable), and it's useful to be able to tell the difference.
Test Plan: {F1212930}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4571
Differential Revision: https://secure.phabricator.com/D15671
Summary:
Ref T4571. This adds a new option which allows you to upgrade your one-host configuration to a multi-host configuration by configuring it.
Doing this currently does nothing. I wrote a lot of words about what it is //supposed// to do in the future, though.
Test Plan:
- Tried to configure the option in all the possible bad ways, got errors.
- Read documentation.
Reviewers: chad
Reviewed By: chad
Subscribers: eadler
Maniphest Tasks: T4571
Differential Revision: https://secure.phabricator.com/D15663
Summary:
Ref T4571. There will be a very long path beyond this, but add a basic read-only mode. You can explicitly enable this to put Phabricator in a sort of "maintenance" mode today if you're swapping databases or something.
In the long term, we'll automatically degrade into this mode if the master database is down.
Test Plan:
- Enabled read-only mode.
- Browsed around.
- Didn't immediately see anything that was totally 100% broken.
Most stuff is 80-90% broken right now. For example:
- Stuff like submitting comments doesn't work, and gives you a confusing, unhelpful error.
- None of the UI really knows that it's read-only. EditEngine stuff should all hide itself and say "you can't add new comments while an install is in read-only mode", for example, but currently does not.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4571
Differential Revision: https://secure.phabricator.com/D15662
Summary: Testing out a new 'nav' layout in Settings / Config. Spent a few days here and couldn't find much better overall.
Test Plan: View each page in Settings and in Config. Save some config options. Test mobile, desktop, tablet.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15659
Summary: Closes T10690
Test Plan: Open Badges application, go to Advanced Search, search for a badge by its name and see result.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Maniphest Tasks: T10690
Differential Revision: https://secure.phabricator.com/D15656
Summary: Bumps to 14px, fixes some on Differential
Test Plan: view various headers in Differential
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15647
Summary:
Ref T6027. Try this out and see how it feels? Clear issues:
- This definitely shouldn't be at the top.
- You should probably be able to select it multiple times?
- Some of the "which columns show up" rules might need adjustment?
- Diamond marker maybe not great?
Not sure I love this but it doesn't feel //terrible//...
Test Plan: {F1207891}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6027
Differential Revision: https://secure.phabricator.com/D15638
Summary: Ref T6027. This converts the old transaction records to the new format so we don't have to keep legacy code around.
Test Plan: Migrated tasks, browsed around, looked at transaction records, didn't see any issues.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6027
Differential Revision: https://secure.phabricator.com/D15637
Summary: Ref T7303. This interaction is very oldschool; modernize it to enable/disable instead of "nuke from orbit".
Test Plan:
- Enabled applications.
- Disabled applications.
- Viewed applications in list view.
- Generated new tokens.
- Tried to use a token from a disabled application (got rebuffed).
- Tried to use a token from an enabled application (worked fine).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7303
Differential Revision: https://secure.phabricator.com/D15620
Summary: Moves these Maniphest pages over to modern UI, components
Test Plan: Batch Edit Tasks, View some reports.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15614
Summary: Ref T7303. This application is currently stone-age tech (no transactions, hard "delete" action). Bring it up to modern specs.
Test Plan:
- Created and edited an OAuth application.
- Viewed transaction record.
- Tried to create something with no name, invalid redirect URI, etc. Was gently rebuffed with detailed explanatory errors.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7303
Differential Revision: https://secure.phabricator.com/D15609
Summary: Uses modern UI, `newPage`, etc. Changes table behavior to always scroll if too large for container, can't find anything this breaks, but be on the lookout.
Test Plan: Pull up help and view pages, search for some people and projects.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15611
Summary: Missed converting this page, scenario. The box was poorly formatted.
Test Plan: Create a new document that needs signed, verify box is correctly spaced and colored.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15591
Summary: Pulls everything over to two column UI and new edit pages. Removed history view and consolidated some pages.
Test Plan: New Panel, Edit Panel. New Dashboard, Edit Dashboard, View Standalone pages.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15588
Summary: Walks through various object, rule, create forms and transcripts in Herald. Slightly nicer looking.
Test Plan: Make rules, see rules, edit rules, see transcripts.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15559
Summary: Adds basic commenting to Fund Initiatives.
Test Plan: Leave a comment, see comment.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15554
Summary:
Ref T10537. Currently, Nuance has a `NuanceRequestor` object, intended to represent the external user who created content (e.g., a GitHub account or a Twitter account or whatever).
This object is currently almost unused, and its design predates Doorkeeper. In D15541, I chose to use doorkeeper objects instead of NuanceRequestor objects to represent requestors.
I don't currently anticipate a need for such an object, given that we have Doorkeeper. If we do need it in the future for some reason, it would be fairly easy to restore it, create a requestor type which wraps a Doorkeeper object, and then migrate. Not super thrilling to do that, but not a huge mess.
`NuanceItem` still has a `requestorPHID`, but this is now a less formal object PHID instead of a more formal Requestor-object PHID, and holds a doorkeeper exeternal object PHID for GitHub events.
Test Plan:
- Grepped for `nuancerequestor`.
- Ran `bin/storage upgrade -f`.
- Grepped for `requestor`, remaining uses of this term seem reasonable/correct.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10537
Differential Revision: https://secure.phabricator.com/D15546
Summary: Cleans up EditEngine, adds new layout to EditEngine and descendents
Test Plan: Test creating a new form, reordering, marking and unmarking defaults. View new forms.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15531
Summary: Ref T8996, Convert badge recipients from Edges to actual BadgeAward objects
Test Plan: Create badge, award it to recipient. Make sure adding/removing recipients works. (Still need to migrate exisiting recipients to new table and need to create activity feed blurbs)
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: chad, Korvin
Maniphest Tasks: T8996
Differential Revision: https://secure.phabricator.com/D15014
Summary:
Fixes T10302. I think we had fixed-width dialog containers in the past (?) but they all handle their own centering now.
This was causing them to be slightly off-center as a result, and creating the 7px issue in T10302.
Test Plan:
- Viewed a wide dialog (task edit).
- Viewed a narrow dialog (notification dismissal confirmation).
- Viewed dialogs on wide/narrow screens.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10302
Differential Revision: https://secure.phabricator.com/D15529
Summary:
Ref T10537. For Nuance, I want to introduce new sources (like "GitHub" or "GitHub via Nuance" or something) but this needs to modularize eventually.
Split ContentSource apart so applications can add new content sources.
Test Plan:
This change has huge surface area, so I'll hold it until post-release. I think it's fairly safe (and if it does break anything, the breaks should be fatals, not anything subtle or difficult to fix), there's just no reason not to hold it for a few hours.
- Viewed new module page.
- Grepped for all removed functions/constants.
- Viewed some transactions.
- Hovered over timestamps to get content source details.
- Added a comment via Conduit.
- Added a comment via web.
- Ran `bin/storage upgrade --namespace XXXXX --no-quickstart -f` to re-run all historic migrations.
- Generated some objects with `bin/lipsum`.
- Ran a bulk job on some tasks.
- Ran unit tests.
{F1190182}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10537
Differential Revision: https://secure.phabricator.com/D15521
Summary: Updates the Harbormaster UI to match the new two column everywhere else.
Test Plan: Did best I could, tested builds, plans, steps, buildables. Unable to test lint/unit locally, I need to set that up. Kick the tires for me pls. :3
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15523
Summary: Moves everything I could find in Phortune to new UI layouts.
Test Plan: Tested every page I could get two, unclear how to test subscriptions.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15513
Summary:
Ref T10537. Generally, when users interact with Nuance items we'll dump a command into a queue and apply it in the background. This avoids race conditions with multiple users interacting with an item, which Nuance is more subject to than other applications because it has an import/external component.
The "sync" command doesn't actually do anything yet.
Test Plan: {F1186365}
Reviewers: chad
Reviewed By: chad
Subscribers: Luke081515.2
Maniphest Tasks: T10537
Differential Revision: https://secure.phabricator.com/D15506
Summary:
Ref T10537. These are objects which are bound to some external object, like a Maniphest task which is a representation of a GitHub issue.
This doesn't do much yet and may change, but my thinking is:
- I'm putting these on-object instead of on edges because I think we want to actively change the UI for them (e.g., clearly call out that the object is bridged) but don't want every page to need to do extra queries in the common case where zero bridged objects exist anywhere in the system.
- I'm making these one-to-one, more or less: an issue can't be bridged to a bunch of tasks, nor can a bunch of tasks be bridged to a single issue. Pretty sure this makes sense? I can't come up with any reasonable, realistic cases where you want a single GitHub issue to publish to multiple different tasks in Maniphest.
- Technically, one type of each bridgable object could be bridged, but I expect this to never actually occur. Hopefully.
Test Plan: Ran storage upgrade, loaded some pages.
Reviewers: chad
Reviewed By: chad
Subscribers: Luke081515.2
Maniphest Tasks: T10537
Differential Revision: https://secure.phabricator.com/D15502
Summary:
Fixes T10646. When you load the page or click "New Condition" or "New Action", we try to add a condition and action with some default values.
Currently, the logic just sets everything to `null` or `'default'`. This technically works in Safari, but is less successful in Chrome. (I think Safari prevents you from picking an invalid value.)
Instead of relying on the browser to pick the right value, set the correct value explicitly.
Test Plan:
- Created a new rule in Chrome, Safari.
- Added fields and conditions in Chrome, Safari.
- Edited existing rules in Chrome, Safari.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10646
Differential Revision: https://secure.phabricator.com/D15507
