Summary:
Ref T4843. This adds support to `javelin_tag()` for an `aural` attribute. When specified, `true` values mean "this content is aural-only", while `false` values mean "this content is not aural".
- I've attempted to find the best modern approaches for marking this content, but the `aural` attribute should let us change the mechanism later.
- Make the "beta" markers on application navigation visual only (see T4843). This information is of very low importance, the application navigation is accessed frequently, and the information is available on the application list.
- Partially convert the main navigation. This is mostly to test things, since I want to get more concrete feedback about approaches here.
- Add a `?__aural__=1` attribute, which renders the page with aural-only elements visible and visual-only elements colored.
Test Plan: {F146476}
Reviewers: btrahan, scp, chad
Reviewed By: chad
Subscribers: aklapper, qgil, epriestley
Maniphest Tasks: T4843
Differential Revision: https://secure.phabricator.com/D8830
Summary: Ref T4398. Prevent users from brute forcing multi-factor auth by rate limiting attempts. This slightly refines the rate limiting to allow callers to check for a rate limit without adding points, and gives users credit for successfully completing an auth workflow.
Test Plan: Tried to enter hisec with bad credentials 11 times in a row, got rate limited.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4398
Differential Revision: https://secure.phabricator.com/D8911
Summary:
Ref T4398. The major goals here is to let administrators strip auth factors in two cases:
- A user lost their phone and needs access restored to their account; or
- an install previously used an API-based factor like SMS, but want to stop supporting it (this isn't possible today).
Test Plan:
- Used `bin/auth list-factors` to show installed factors.
- Used `bin/auth strip` with various mixtures of flags to selectively choose and strip factors from accounts.
- Also ran `bin/auth refresh` to verify refreshing OAuth tokens works (small `OAuth` vs `OAuth2` tweak).
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4398
Differential Revision: https://secure.phabricator.com/D8909
Summary:
Ref T4398. Allows auth factors to render and validate when prompted to take a hi-sec action.
This has a whole lot of rough edges still (see D8875) but does fundamentally work correctly.
Test Plan:
- Added two different TOTP factors to my account for EXTRA SECURITY.
- Took hisec actions with no auth factors, and with attached auth factors.
- Hit all the error/failure states of the hisec entry process.
- Verified hisec failures appear in activity logs.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4398
Differential Revision: https://secure.phabricator.com/D8886
Summary:
Ref T4398. This is still pretty rough and isn't exposed in the UI yet, but basically works. Some missing features / areas for improvement:
- Rate limiting attempts (see TODO).
- Marking tokens used after they're used once (see TODO), maybe. I can't think of ways an attacker could capture a token without also capturing a session, offhand.
- Actually turning this on (see TODO).
- This workflow is pretty wordy. It would be nice to calm it down a bit.
- But also add more help/context to help users figure out what's going on here, I think it's not very obvious if you don't already know what "TOTP" is.
- Add admin tool to strip auth factors off an account ("Help, I lost my phone and can't log in!").
- Add admin tool to show users who don't have multi-factor auth? (so you can pester them)
- Generate QR codes to make the transfer process easier (they're fairly complicated).
- Make the "entering hi-sec" workflow actually check for auth factors and use them correctly.
- Turn this on so users can use it.
- Adding SMS as an option would be nice eventually.
- Adding "password" as an option, maybe? TOTP feels fairly good to me.
I'll post a couple of screens...
Test Plan:
- Added TOTP token with Google Authenticator.
- Added TOTP token with Authy.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4398
Differential Revision: https://secure.phabricator.com/D8875
Summary:
Ref T4398. This adds a settings panel for account activity so users can review activity on their own account. Some goals are:
- Make it easier for us to develop and support auth and credential information, see T4398. This is the primary driver.
- Make it easier for users to understand and review auth and credential information (see T4842 for an example -- this isn't there yet, but builds toward it).
- Improve user confidence in security by making logging more apparent and accessible.
Minor corresponding changes:
- Entering and exiting hisec mode is now logged.
- This, sessions, and OAuth authorizations have moved to a new "Sessions and Logs" area, since "Authentication" was getting huge.
Test Plan:
- Viewed new panel.
- Viewed old UI.
- Entered/exited hisec and got prompted.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4398
Differential Revision: https://secure.phabricator.com/D8871
Summary:
Ref T4398. This is roughly a "sudo" mode, like GitHub has for accessing SSH keys, or Facebook has for managing credit cards. GitHub actually calls theirs "sudo" mode, but I think that's too technical for big parts of our audience. I've gone with "high security mode".
This doesn't actually get exposed in the UI yet (and we don't have any meaningful auth factors to prompt the user for) but the workflow works overall. I'll go through it in a comment, since I need to arrange some screenshots.
Test Plan: See guided walkthrough.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4398
Differential Revision: https://secure.phabricator.com/D8851
Summary: Throwing this up for testing, swapped out all icons in timeline for their font equivelants. Used better icons where I could as well. We should feel free to use more / be fun with the icons when possible since there is no penalty anymore.
Test Plan: I browsed many, not all, timelines in my sandbox and in IE8. Some of these were just swagged, but I'm expecting we'll do more SB testing before landing.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D8827
Summary: Fixes T4755. This also includes putting in a note that Google might ToS you to use the Google+ API. Lots of code here as there was some repeated stuff between OAuth1 and OAuth2 so I made a base OAuth with less-base OAuth1 and OAuth2 inheriting from it. The JIRA provider remains an independent mess and didn't get the notes field thing.
Test Plan: looked at providers and read pretty instructions.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4755
Differential Revision: https://secure.phabricator.com/D8726
Summary: Fixes T3208. This forces us to bind+search even if there are no anonymous credentials.
Test Plan: Checked the box, saved the form. Unchecked the box, saved the form. LDAP??
Reviewers: Firehed
Reviewed By: Firehed
Subscribers: epriestley
Maniphest Tasks: T3208
Differential Revision: https://secure.phabricator.com/D8723
Summary: Fixes T4451. See also D8612.
Test Plan: Viewed panel and read text, saw it matched up with the new console.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4451
Differential Revision: https://secure.phabricator.com/D8613
Summary:
- Dialog pages currently have no titles or crumbs, and look shoddy. Add titles and crumbs.
- Dialog titles aren't always great for crumbs, add an optional "short title" for crumbs.
- `AphrontDialogResponse` is pure boilerplate. Allow controllers to just return a `DialogView` instead and get the same effect.
- Building dialogs requires a bit of boilerplate, and we generally construct them with no explicit `"action"`, which has some issues with T4593. Provide a convenience method to set the viewer and get a reasonable, explict submit URI.
Test Plan:
- Viewed dialog on its own.
- Viewed dialog as a dialog.
{F132353}
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8577
Summary:
This is partly a good feature, and partly should reduce false positives on HackerOne reporting things vaguely related to this.
Allow a user to terminate login sessions from the settings panel.
Test Plan:
- Terminated a session.
- Terminated all sessions.
- Tried to terminate all sessions again.
- Logged in with two browsers, terminated the other browser's session, reloaded, got kicked out.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8556
Summary:
Fixes T3471. Specific issues:
- Add the ability to set a temporary cookie (expires when the browser closes).
- We overwrote 'phcid' on every page load. This creates some issues with browser extensions. Instead, only write it if isn't set. To counterbalance this, make it temporary.
- Make the 'next_uri' cookie temporary.
- Make the 'phreg' cookie temporary.
- Fix an issue where deleted cookies would persist after 302 (?) in some cases (this is/was 100% for me locally).
Test Plan:
- Closed my browser, reopned it, verified temporary cookies were gone.
- Logged in, authed, linked, logged out.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3471
Differential Revision: https://secure.phabricator.com/D8537
Summary:
See <https://github.com/facebook/phabricator/issues/541>.
- If a provider returns the email `""` or `"0"`, we currently don't let the user edit it and thus don't let them register.
- If a provider returns an invalid email like `"!!!"` (permitted by GitHub, e.g.), we show them a nonsense error message.
Instead:
- Pretend we didn't get an address if we get an invalid address.
- Test the address strictly against `null`.
Test Plan: Registered on Phabricator with my GitHub email set to `""` (empty string) and `"!!!"` (bang bang bang).
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: aran, epriestley
Differential Revision: https://secure.phabricator.com/D8528
Summary:
Via HackerOne. In regular expressions, "$" matches "end of input, or before terminating newline". This means that the expression `/^A$/` matches two strings: `"A"`, and `"A\n"`.
When we care about this, use `\z` instead, which matches "end of input" only.
This allowed registration of `"username\n"` and similar.
Test Plan:
- Grepped codebase for all calls to `preg_match()` / `preg_match_all()`.
- Fixed the ones where this seemed like it could have an impact.
- Added and executed unit tests.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: aran, epriestley
Differential Revision: https://secure.phabricator.com/D8516
Summary:
Ref T4593. There are a variety of clever attacks against OAuth which involve changing the redirect URI to some other URI on the same domain which exhibits unexpected behavior in response to an OAuth request. The best approach to dealing with this is for providers to lock to a specific path and refuse to redirect elsewhere, but not all providers do this.
We haven't had any specific issues related to this, but the anchor issue in T4593 was only a step away.
To mitigate this in general, we can reject the OAuth2 `'code'` parameter on //every// page by default, and then whitelist it on the tiny number of controllers which should be able to receive it.
This is very coarse, kind of overkill, and has some fallout (we can't use `'code'` as a normal parameter in the application), but I think it's relatively well-contained and seems reasonable. A better approach might be to whitelist parameters on every controller (i.e., have each controller specify the parameters it can receive), but that would be a ton of work and probably cause a lot of false positives for a long time.
Since we don't use `'code'` normally anywhere (as far as I can tell), the coarseness of this approach seems reasonable.
Test Plan:
- Logged in with OAuth.
- Hit any other page with `?code=...` in the URL, got an exception.
- Grepped for `'code'` and `"code"`, and examined each use to see if it was impacted.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: aran, epriestley
Maniphest Tasks: T4593
Differential Revision: https://secure.phabricator.com/D8499
Summary: Although the defaults don't require a verified email address, it's easy to lock yourself out by accident by configuring `auth.require-email-verification` or `auth.email-domains` before setting up email. Just force-verify the initial/setup account's address.
Test Plan: Went through setup on a fresh install, saw address verify.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D8365
Summary: If an attacker somehow intercepts a verification URL for an email address, they can hypothetically CSRF the account owner into verifying it. What you'd do before (how do you get the link?) and after (why do you care that you tricked them into verifying) performing this attack is unclear, but in theory we should require a CSRF submission here; add one.
Test Plan: {F118691}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D8351
Summary: If you copy the registration URL, then register, then load the URL again while logged out (i.e., attempt to reuse the registration URL), we try to show you a tailored error message. However, this call is not correct so we show you a not-so tailored exception instead.
Test Plan:
- Get to the registration screen.
- Save URL.
- Complete registration.
- Log out.
- Return to saved URL.
Previously, exception. Now, readable error.
{F117585}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D8322
Summary:
OAuth1 doesn't have anything like the `state` parameter, and I overlooked that we need to shove one in there somewhere. Append it to the callback URI. This functions like `state` in OAuth2.
Without this, an attacker can trick a user into logging into Phabricator with an account the attacker controls.
Test Plan:
- Logged in with JIRA.
- Logged in with Twitter.
- Logged in with Facebook (an OAuth2 provider).
- Linked a Twitter account.
- Linked a Facebook account.
- Jiggered codes in URIs and verified that I got the exceptions I expected.
Reviewers: btrahan, arice
Reviewed By: arice
CC: arice, chad, aran
Differential Revision: https://secure.phabricator.com/D8318
Summary:
Via HackerOne. An attacker can bypass `auth.email-domains` by registering with an email like:
aaaaa...aaaaa@evil.com@company.com
We'll validate the full string, then insert it into the database where it will be truncated, removing the `@company.com` part. Then we'll send an email to `@evil.com`.
Instead, reject email addresses which won't fit in the table.
`STRICT_ALL_TABLES` stops this attack, I'm going to add a setup warning encouraging it.
Test Plan:
- Set `auth.email-domains` to `@company.com`.
- Registered with `aaa...aaa@evil.com@company.com`. Previously this worked, now it is rejected.
- Did a valid registration.
- Tried to add `aaa...aaaa@evil.com@company.com` as an email address. Previously this worked, now it is rejected.
- Did a valid email add.
- Added and executed unit tests.
Reviewers: btrahan, arice
Reviewed By: arice
CC: aran, chad
Differential Revision: https://secure.phabricator.com/D8308
Summary:
Ref T4443.
- Add a `password_hash()`-based bcrypt hasher if `password_hash()` is available.
- When a user logs in using a password, upgrade their password to the strongest available hash format.
- On the password settings page:
- Warn the user if their password uses any algorithm other than the strongest one.
- Show the algorithm the password uses.
- Show the best available algorithm.
Test Plan: As an md5 user, viewed password settings page and saw a warning. Logged out. Logged in, got upgraded, no more warning. Changed password, verified database rehash. Logged out, logged in.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4443
Differential Revision: https://secure.phabricator.com/D8270
Summary:
Ref T4443. Make hashing algorithms pluggable and extensible so we can deal with the attendant complexities more easily.
This moves "Iterated MD5" to a modular implementation, and adds a tiny bit of hack-glue so we don't need to migrate the DB in this patch. I'll migrate in the next patch, then add bcrypt.
Test Plan:
- Verified that the same stuff gets stored in the DB (i.e., no functional changes):
- Logged into an old password account.
- Changed password.
- Registered a new account.
- Changed password.
- Switched back to master.
- Logged in / out, changed password.
- Switched back, logged in.
- Ran unit tests (they aren't super extensive, but cover some of the basics).
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, kofalt
Maniphest Tasks: T4443
Differential Revision: https://secure.phabricator.com/D8268
Summary: This uses the slightly smaller icons. Not sure about the logout icon, will play with it more in the morning.
Test Plan: tested new nav on desktop and mobile.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D8119
Summary:
Ref T3623. This is like a pre-v0, in that it doesn't have a dropdown yet.
Clicking the button takes you to a page which can serve as a right click / mobile / edit target in the long run, but is obviously not great for desktop use. I'll add the dropdown in the next iteration.
Test Plan: {F105631}
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T3623
Differential Revision: https://secure.phabricator.com/D8088
Summary:
Via HackerOne, there are two related low-severity issues with this workflow:
- We don't check if you're already logged in, so an attacker can trick a victim (whether they're logged in or not) into clicking a reset link for an account the attacker controls (maybe via an invisible iframe) and log the user in under a different account.
- We don't check CSRF tokens either, so after fixing the first thing, an attacker can still trick a //logged-out// victim in the same way.
It's not really clear that doing this opens up any significant attacks afterward, but both of these behaviors aren't good.
I'll probably land this for audit in a few hours if @btrahan doesn't have a chance to take a look at it since he's probably on a plane for most of the day, I'm pretty confident it doesn't break anything.
Test Plan:
- As a logged-in user, clicked another user's password reset link and was not logged in.
- As a logged-out user, clicked a password reset link and needed to submit a form to complete the workflow.
Reviewers: btrahan
CC: chad, btrahan, aran
Differential Revision: https://secure.phabricator.com/D8079
Summary: Ref T4339. We didn't previously check `isFormPost()` on these, but now should.
Test Plan: Changed csrf token on login, got kicked out.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T4339
Differential Revision: https://secure.phabricator.com/D8051
Summary:
Fixes T3793. There's a lot of history here, see D4012, T2102. Basically, the problem is that things used to work like this:
- User is logged out and accesses `/xyz/`. After they login, we'd like to send them back to `/xyz/`, so we set a `next_uri` cookie.
- User's browser has a bunch of extensions and now makes a ton of requests for stuff that doesn't exist, like `humans.txt` and `apple-touch-icon.png`. We can't distinguish between these requests and normal requests in a general way, so we write `next_uri` cookies, overwriting the user's intent (`/xyz/`).
To fix this, we made the 404 page not set `next_uri`, in D4012. So if the browser requests `humans.txt`, we 404 with no cookie, and the `/xyz/` cookie is preserved. However, this is bad because an attacker can determine if objects exist and applications are installed, by visiting, e.g., `/T123` and seeing if they get a 404 page (resource really does not exist) or a login page (resource exists). We'd rather not leak this information.
The comment in the body text describes this in more detail.
This diff sort of tries to do the right thing most of the time: we write the cookie only if we haven't written it in the last 2 minutes. Generally, this should mean that the original request to `/xyz/` writes it, all the `humans.txt` requests don't write it, and things work like users expect. This may occasionally do the wrong thing, but it should be very rare, and we stop leaking information about applications and objects.
Test Plan: Logged out, clicked around / logged in, used Charles to verify that cookies were set in the expected way.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3793
Differential Revision: https://secure.phabricator.com/D8047
Summary: Fixes T4339. If you're anonymous, we use a digest of your session key to generate a CSRF token. Otherwise, everything works normally.
Test Plan: Logged out, logged in, tweaked CSRF in forms -- I'll add some inlines.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4339
Differential Revision: https://secure.phabricator.com/D8046
Summary:
Ref T4339. Login providers use absolute URIs, but the ones that rely on local form submits should not, because we want to include CSRF tokens where applicable.
Instead, make the default be relative URIs and turn them into absolute ones for the callback proivders.
Test Plan: Clicked, like, every login button.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4339
Differential Revision: https://secure.phabricator.com/D8045
Summary:
Ref T4339. Ref T4310. Currently, sessions look like `"afad85d675fda87a4fadd54"`, and are only issued for logged-in users. To support logged-out CSRF and (eventually) external user sessions, I made two small changes:
- First, sessions now have a "kind", which is indicated by a prefix, like `"A/ab987asdcas7dca"`. This mostly allows us to issue session queries more efficiently: we don't have to issue a query at all for anonymous sessions, and can join the correct table for user and external sessions and save a query. Generally, this gives us more debugging information and more opportunity to recover from issues in a user-friendly way, as with the "invalid session" error in this diff.
- Secondly, if you load a page and don't have a session, we give you an anonymous session. This is just a secret with no special significance.
This does not implement CSRF yet, but gives us a client secret we can use to implement it.
Test Plan:
- Logged in.
- Logged out.
- Browsed around.
- Logged in again.
- Went through link/register.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4310, T4339
Differential Revision: https://secure.phabricator.com/D8043
Summary: Ref T4339. We have more magical cookie names than we should, move them all to a central location.
Test Plan: Registered, logged in, linked account, logged out. See inlines.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4339
Differential Revision: https://secure.phabricator.com/D8041
Summary:
Fixes T4143. This mitigates the "use a botnet to slowly try to login to every user account using the passwords '1234', 'password', 'asdfasdf', ..." attack, like the one that hit GitHub.
(I also donated some money to Openwall as a thanks for compiling this wordlist.)
Test Plan:
- Tried to register with a weak password; registered with a strong password.
- Tried to set VCS password to a weak password; set VCS password to a strong password.
- Tried to change password to a weak password; changed password to a strong password.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, chad
Maniphest Tasks: T4143
Differential Revision: https://secure.phabricator.com/D8048
Summary:
Ref T4310. Fixes T3720. This change:
- Removes concurrent session limits. Instead, unused sessions are GC'd after a while.
- Collapses all existing "web-1", "web-2", etc., sessions into "web" sessions.
- Dramatically simplifies the code for establishing a session (like omg).
Test Plan: Ran migration, checked Sessions panel and database for sanity. Used existing session. Logged out, logged in. Ran Conduit commands.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4310, T3720
Differential Revision: https://secure.phabricator.com/D7978
Summary:
Ref T3720. Ref T4310. Currently, we limit the maximum number of concurrent sessions of each type. This is primarily because sessions predate garbage collection and we had no way to prevent the session table from growing fairly quickly and without bound unless we did this.
Now that we have GC (and it's modular!) we can just expire unused sessions after a while and throw them away:
- Add a `sessionExpires` column to the table, with a key.
- Add a GC for old sessions.
- When we establish a session, set `sessionExpires` to the current time plus the session TTL.
- When a user uses a session and has used up more than 20% of the time on it, extend the session.
In addition to this, we could also rotate sessions, but I think that provides very little value. If we do want to implement it, we should hold it until after T3720 / T4310.
Test Plan:
- Ran schema changes.
- Looked at database.
- Tested GC:
- Started GC.
- Set expires on one row to the past.
- Restarted GC.
- Verified GC nuked the session.
- Logged in.
- Logged out.
- Ran Conduit method.
- Tested refresh:
- Set threshold to 0.0001% instead of 20%.
- Loaded page.
- Saw a session extension ever few page loads.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4310, T3720
Differential Revision: https://secure.phabricator.com/D7976
Summary:
Ref T4310. Ref T3720. Two major things are going on here:
- I'm making this table work more like a standard table, which, e.g., makes `delete()` simpler to implement.
- Currently, the primary key is `(userPHID, type)`. I want to get rid of this, issue unlimited sessions, and GC old sessions. This means we can't have a unique key on `(userPHID, type)` anymore. This removes it as the primary key and adds it as a normal key instead. There's no functional change -- the code to generate sessions guarantees that it will never write duplicate rows or write additional rows -- but allows us to drop the `-1`, `-2` qualifiers in the future.
- Also of note, our task is made far simpler here because MySQL will automatically assign values to new `AUTO_INCREMENT` columns, so we don't have to migrate to get real IDs.
Test Plan: Ran migrations, verified table looked sane. Logged out, logged in.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3720, T4310
Differential Revision: https://secure.phabricator.com/D7975
Summary: Adds "verified" and "secretKey" to Legalpad document signatures. For logged in users using an email address they own, things are verified right away. Otherwise, the email is sent a verification letter. When the user clicks the link the signature is marked verified.
Test Plan: signed the document with a bogus email address not logged in. verified the email that would be sent looked good from command line. followed link and successfully verified bogus email address
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran, asherkin
Maniphest Tasks: T4283
Differential Revision: https://secure.phabricator.com/D7930
Summary: Ref T4310. Ref T3720. We use bare strings to refer to session types in several places right now; use constants instead.
Test Plan: grep; logged out; logged in; ran Conduit commands.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4310, T3720
Differential Revision: https://secure.phabricator.com/D7963
Summary: Ref T4310. Ref T3720. Session operations are currently part of PhabricatorUser. This is more tightly coupled than needbe, and makes it difficult to establish login sessions for non-users. Move all the session management code to a `SessionEngine`.
Test Plan:
- Viewed sessions.
- Regenerated Conduit certificate.
- Verified Conduit sessions were destroyed.
- Logged out.
- Logged in.
- Ran conduit commands.
- Viewed sessions again.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4310, T3720
Differential Revision: https://secure.phabricator.com/D7962
Summary: Ref T4310. Ref T3720. Partly, this makes it easier for users to understand login sessions. Partly, it makes it easier for me to make changes to login sessions for T4310 / T3720 without messing anything up.
Test Plan: {F101512}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3720, T4310
Differential Revision: https://secure.phabricator.com/D7954
Summary:
Ref T4310. This is a small step toward separating out the session code so we can establish sessions for `ExternalAccount` and not just `User`.
Also fix an issue with strict MySQL and un-admin / un-disable from web UI.
Test Plan: Logged in, logged out, admined/de-admin'd user, added email address, checked user log for all those events.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4310
Differential Revision: https://secure.phabricator.com/D7953
Summary: This removes the bulk of the "Form Errors" text, some variations likely exists. These are a bit redundant and space consuming. I'd also like to back ErrorView more into PHUIObjectBox.
Test Plan: Test out the forms, see errors without the text.
Reviewers: epriestley, btrahan
CC: Korvin, epriestley, aran, hach-que
Differential Revision: https://secure.phabricator.com/D7924
Summary: Fixes T4290. At least one of the fields (`realname`) may have a list of items, and `strlen(array('first', 'last'))` produces the warning and stack trace in T4290.
Test Plan:
- Edited `realname` from an array value to an array value.
- Hit error.
- Applied patch.
- No more error.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4290
Differential Revision: https://secure.phabricator.com/D7905
Summary: Ref T4289. Make it clear that this provider does not currently work with JIRA 5.
Test Plan: Viewed JIRA provider from `/auth/`, saw warnings.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T4289
Differential Revision: https://secure.phabricator.com/D7906
Summary:
Ref T2015. Not directly related to Drydock, but I've wanted to do this for a bit.
Introduce a common base class for all the workflows in the scripts in `bin/*`. This slightly reduces code duplication by moving `isExecutable()` to the base, but also provides `getViewer()`. This is a little nicer than `PhabricatorUser::getOmnipotentUser()` and gives us a layer of indirection if we ever want to introduce more general viewer mechanisms in scripts.
Test Plan: Lint; ran some of the scripts.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7838
Summary: We currently have a lot of calls to `addCrumb(id(new PhabricatorCrumbView())->...)` which can be expressed much more simply with a convenience method. Nearly all crumbs are only textual.
Test Plan:
- This was mostly automated, then I cleaned up a few unusual sites manually.
- Bunch of grep / randomly clicking around.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: hach-que, aran
Differential Revision: https://secure.phabricator.com/D7787
Summary: Fixes T4148. LDAPS works with "ldaps://", it just isn't documented or clear.
Test Plan: {F84893}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4148
Differential Revision: https://secure.phabricator.com/D7652
Summary:
Ref T4140. We could hit a redirect loop for a user with a verified primary email address but no "is verified" flag on their account. This shouldn't be possible since the migration should have set the flag, but we can deal with it more gracefully when it does happen (maybe because users forgot to run `storage/upgrade`, or because of ghosts).
In the controller, check the same flag we check before forcing the user to the controller.
When verifying, allow the verification if either the email or user flag isn't set.
Test Plan: Hit `/login/mustverify/`; verified an address.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4140
Differential Revision: https://secure.phabricator.com/D7621
Summary: Ref T4140. Allow unapproved users to verify their email addresses. Currently, unapproved blocks email verification, but should not.
Test Plan: Clicked email verification link as an unapproved user, got email verified.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T4140
Differential Revision: https://secure.phabricator.com/D7618
Summary:
Fixes T4132. If you run "bin/auth recover" before setting the base URI, it throws when trying to generate a production URI.
Instead, just show the path. We can't figure out the domain, and I think this is less confusing than showing "your.phabricator.example.com", etc.
Test Plan: Ran `bin/auth recover <user>` for valid and missing base-uri.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4132
Differential Revision: https://secure.phabricator.com/D7615
Summary:
A usable, Land to GitHub flow.
Still to do:
- Refactor all git/hg stratagies to a sane structure.
- Make the dialogs Workflow + explain why it's disabled.
- Show button and request Link Account if GH is enabled, but user is not linked.
- After refreshing token, user ends up in the settings stage.
Hacked something in LandController to be able to show an arbitrary dialog from a strategy.
It's not very nice, but I want to make some more refactoring to the controller/strategy/ies anyway.
Also made PhabricatorRepository::getRemoteURIObject() public, because it was very useful in getting
the domain and path for the repo.
Test Plan:
Went through these flows:
- load revision in hosted, github-backed, non-github backed repos to see button as needed.
- hit land with weak token - sent to refresh it with the extra scope.
- Land to repo I'm not allowed - got proper error message.
- Successfully landed; Failed to apply patch.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T182
Differential Revision: https://secure.phabricator.com/D7555
Summary:
Fixes T3741. The flag is respected in terms of actually creating the account, but the UI is a bit unclear.
This can never occur naturally, but installs can register an event which locks it.
Test Plan:
Artificially locked it, verified I got more reasonable UI;
{F81282}
Reviewers: btrahan, datr
Reviewed By: datr
CC: aran
Maniphest Tasks: T3741
Differential Revision: https://secure.phabricator.com/D7577
Summary:
- Add an option for the queue.
- By default, enable it.
- Dump new users into the queue.
- Send admins an email to approve them.
Test Plan:
- Registered new accounts with queue on and off.
- As an admin, approved accounts and disabled the queue from email.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7576
Summary:
- If you're an administrator and there are users waiting for approval, show a count on the home page.
- Sort out the `isUserActivated()` access check.
- Hide all the menu widgets except "Logout" for disabled and unapproved users.
- Add a "Log In" item.
- Add a bunch of unit tests.
Test Plan: Ran unit tests, clicked around as unapproved/approved/logged-in/logged-out users.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, chad
Differential Revision: https://secure.phabricator.com/D7574
Summary:
Nothing fancy here, just:
- UI to show users needing approval.
- "Approve" and "Disable" actions.
- Send "Approved" email on approve.
- "Approve" edit + log operations.
- "Wait for Approval" state for users who need approval.
There's still no natural way for users to end up not-approved -- you have to write directly to the database.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7573
Summary:
Small step forward which improves existing stuff or lays groudwork for future stuff:
- Currently, to check for email verification, we have to single-query the email address on every page. Instead, denoramlize it into the user object.
- Migrate all the existing users.
- When the user verifies an email, mark them as `isEmailVerified` if the email is their primary email.
- Just make the checks look at the `isEmailVerified` field.
- Add a new check, `isUserActivated()`, to cover email-verified plus disabled. Currently, a non-verified-but-not-disabled user could theoretically use Conduit over SSH, if anyone deployed it. Tighten that up.
- Add an `isApproved` flag, which is always true for now. In a future diff, I want to add a default-on admin approval queue for new accounts, to prevent configuration mistakes. The way it will work is:
- When the queue is enabled, registering users are created with `isApproved = false`.
- Admins are sent an email, "[Phabricator] New User Approval (alincoln)", telling them that a new user is waiting for approval.
- They go to the web UI and approve the user.
- Manually-created accounts are auto-approved.
- The email will have instructions for disabling the queue.
I think this queue will be helpful for new installs and give them peace of mind, and when you go to disable it we have a better opportunity to warn you about exactly what that means.
Generally, I want to improve the default safety of registration, since if you just blindly coast through the path of least resistance right now your install ends up pretty open, and realistically few installs are on VPNs.
Test Plan:
- Ran migration, verified `isEmailVerified` populated correctly.
- Created a new user, checked DB for verified (not verified).
- Verified, checked DB (now verified).
- Used Conduit, People, Diffusion.
Reviewers: btrahan
Reviewed By: btrahan
CC: chad, aran
Differential Revision: https://secure.phabricator.com/D7572
Summary:
Ref T3472. Currently, if an install only allows "@mycompany.com" emails and you try to register with an "@personal.com" account, we let you pick an "@mycompany.com" address instead. This is secure: you still have to verify the email. However, it defies user expectation -- it's somewhat confusing that we let you register. Instead, provide a hard roadblock.
(These accounts can still be linked, just not used for registration.)
Test Plan: See screenshot.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3472
Differential Revision: https://secure.phabricator.com/D7571
Summary: See private chatter. Make it explicitly clear when adding a provider that anyone who can browse to Phabricator can register.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7570
Summary: At least under GitHub, the token value is stored as "null", and not missing. And `null > anything` is false, so Phabricator thinks the token is expired or not there.
Test Plan: http://ph.vm/settings/panel/external/ before shows "No OAuth Access Token," and after it says "Active OAuth Token".
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7466
Summary:
While we mostly have reasonable effective object accessibility when you lock a user out of an application, it's primarily enforced at the controller level. Users can still, e.g., load the handles of objects they can't actually see. Instead, lock the queries to the applications so that you can, e.g., never load a revision if you don't have access to Differential.
This has several parts:
- For PolicyAware queries, provide an application class name method.
- If the query specifies a class name and the user doesn't have permission to use it, fail the entire query unconditionally.
- For handles, simplify query construction and count all the PHIDs as "restricted" so we get a UI full of "restricted" instead of "unknown" handles.
Test Plan:
- Added a unit test to verify I got all the class names right.
- Browsed around, logged in/out as a normal user with public policies on and off.
- Browsed around, logged in/out as a restricted user with public policies on and off. With restrictions, saw all traces of restricted apps removed or restricted.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7367
Summary: Ref T3958. Adds a provider for Mozilla's Persona auth.
Test Plan:
- Created a Persona provider.
- Registered a new account with Persona.
- Logged in with Persona.
- Linked an account with Persona.
- Dissolved an account link with Persona.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3958
Differential Revision: https://secure.phabricator.com/D7313
Summary: Adds an ObjectBox to Phabricator Registration
Test Plan: check logged out page for new header.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D7223
Summary:
Ref T603. Adds clarifying text which expands on policies and explains exceptions and rules. The goal is to provide an easy way for users to learn about special policy rules, like "task owners can always see a task".
This presentation might be a little aggressive. That's probably OK as we introduce policies, but something a little more tempered might be better down the road.
Test Plan: See screenshot.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7150
Summary: I'd like to reuse this for other content areas, renaming for now. This might be weird to keep setForm, but I can fix that later if we need.
Test Plan: reload a few forms in maniphest, projects, differential
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D7120
Summary: See task
Test Plan:
Attempt to signup with recaptcha disabled.
Attempt to signup with recaptcha enabled with incorrect value.
Attempt to signup with recaptcha enabled with correct value.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, aran
Maniphest Tasks: T3832
Differential Revision: https://secure.phabricator.com/D7053
Summary: Adds plain support for object lists that just look like lists
Test Plan: review UIexamples and a number of other applications
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D6922
Summary:
Ref T3687. Adds a Doorkeeper bridge for JIRA issues, plus remarkup support. In particular:
- The Asana and JIRA remarkup rules shared most of their implementation, so I refactored what I could into a base class.
- Actual bridge implementation is straightforward and similar to Asana, although probably not similar enough to really justify refactoring.
Test Plan:
- When logged in as a JIRA-connected user, pasted a JIRA issue link and saw it enriched at rendering time.
- Logged in and out with JIRA.
- Tested an Asana link, too (seems I haven't broken anything).
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3687
Differential Revision: https://secure.phabricator.com/D6878
Summary: Ref T3687. These buttons don't work quite the same way, but are similar enough that the code seems worth consolidating.
Test Plan: Viewed and clicked both OAuth1 (Twitter, JIRA) and OAuth2 (Facebook) login buttons. Got logins.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3687
Differential Revision: https://secure.phabricator.com/D6874
Summary: Depends on D6872. Ref T3687. Give the user a nice dialog instead of a bare exception.
Test Plan: Cancelled out of Twitter and JIRA workflows. We should probably do this for the OAuth2 workflows too, but they're a bit of a pain to de-auth and I am lazy.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3687
Differential Revision: https://secure.phabricator.com/D6873
Summary:
Ref T3687. Depends on D6867. This allows login/registration through JIRA.
The notable difference between this and other providers is that we need to do configuration in two stages, since we need to generate and save a public/private keypair before we can give the user configuration instructions, which takes several seconds and can't change once we've told them to do it.
To this effect, the edit form renders two separate stages, a "setup" stage and a "configure" stage. In the setup stage the user identifies the install and provides the URL. They hit save, we generate a keypair, and take them to the configure stage. In the configure stage, they're walked through setting up all the keys. This ends up feeling a touch rough, but overall pretty reasonable, and we haven't lost much generality.
Test Plan: {F57059}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3687
Differential Revision: https://secure.phabricator.com/D6868
Summary: Ref T3687. Depends on D6864. Implements the `OAuth1` provider in Phabricator (which is mostly similar to the OAuth2 provider, but doesn't share quite enough code to actually extend a common base class, I think) and Twitter as a concrete subclass.
Test Plan:
Created a Twitter provider. Registered, logged in, linked, refreshed account link.
{F57054}
{F57056}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3687
Differential Revision: https://secure.phabricator.com/D6865
Summary:
This attempts some consistency in form layouts. Notably, they all now contain headers and are 16px off the sides and tops of pages. Also updated dialogs to the same look and feel. I think I got 98% of forms with this pass, but it's likely I missed some buried somewhere.
TODO: will take another pass as consolidating these colors and new gradients in another diff.
Test Plan: Played in my sandbox all week. Please play with it too and let me know how they feel.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D6806
Summary:
We can get this out of PHIDType reasonably in all cases and simplify implementation here.
None of these translate correctly anyway so they're basically debugging/development strings.
Test Plan: `grep`, browsed some transactions
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6786
Summary:
^\s+(['"])dust\1\s*=>\s*true,?\s*$\n
Test Plan: Looked through the diff.
Reviewers: chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D6769
Summary:
This is mostly for personal reasons / lols, but they have a perfectly functional OAuth2 API and it takes like 15 minutes to add a provider now and I was in this code anyway...
@chad, we could use JIRA, Twitter and Twitch.tv auth icons if you have a chance.
Test Plan: {F53564}
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6706
Summary:
Ref T3373. The submit listener doesn't properly scope the form it listens to right now, so several forms on the page mean that comments post to one of them more or less at random.
Scope it properly by telling it which object PHID it is associated with.
Test Plan: Made Question comments, saw comments Ajax in on the question itself rather than on an arbitrary answer.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3373
Differential Revision: https://secure.phabricator.com/D6611
Summary: Currently, we'll fatal on array typehint issues if this is misconfigured. Instead, we should just reject the configuration. See some discussion in IRC.
Test Plan: Used LDAP to log in.
Reviewers: btrahan, totorico
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6489
Summary: Fixes T3517. Moves the email verification page out of People and into Auth. Makes it look less awful.
Test Plan: {F49636} {F49637}
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3517
Differential Revision: https://secure.phabricator.com/D6425
Summary: The once-choppy LDAP waters seem to have calmed down a bit. Use the service profile log to get a pretty good idea of what's going on with LDAP (see D6391) instead of invasive logging to get a slightly better idea.
Test Plan:
$ ~/src/php-src/sapi/cli/php -f ./bin/auth ldap --trace
>>> [2] <connect> phabricator2_auth
<<< [2] <connect> 1,755 us
>>> [3] <query> SELECT * FROM `auth_providerconfig` ORDER BY id DESC
<<< [3] <query> 423 us
Enter LDAP Credentials
LDAP Username: ldapuser
>>> [4] <exec> $ stty -echo
<<< [4] <exec> 10,370 us
LDAP Password: >>> [5] <exec> $ stty echo
<<< [5] <exec> 6,844 us
Connecting to LDAP...
>>> [6] <ldap> connect (127.0.0.1:389)
<<< [6] <ldap> 12,932 us
>>> [7] <ldap> bind (sn=ldapuser,ou=People, dc=aphront, dc=com)
<<< [7] <ldap> 6,860 us
>>> [8] <ldap> search (ou=People, dc=aphront, dc=com, sn=ldapuser)
<<< [8] <ldap> 5,907 us
Found LDAP Account: ldapuser
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6392
Summary: We currently don't read/save this value correctly. Fix the issue. Ref T1536.
Test Plan: Set real name attributes to "x, y".
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, colegleason
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6388
Summary:
Ref T1536. Ref T2852. Currently, after refreshing the token we don't actually return it. This means that code relying on token refresh fails once per hour (for Asana) in a sort of subtle way. Derp.
Update `bin/auth refresh` to make this failure more clear.
Test Plan: Set `force refresh` flag and verified a return value.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T1536, T2852
Differential Revision: https://secure.phabricator.com/D6295
Summary:
Ref T1536. This is equivalent to logging out and logging back in again, but a bit less disruptive for users. For some providers (like Google), this may eventually do something different (Google has a "force" parameter which forces re-auth and is ostensibly required to refresh long-lived tokens).
Broadly, this process fixes OAuth accounts with busted access tokens so we can do API stuff. For other accounts, it mostly just syncs profile pictures.
Test Plan:
Refreshed LDAP and Oauth accounts, linked OAuth accounts, hit error conditions.
{F47390}
{F47391}
{F47392}
{F47393}
{F47394}
{F47395}
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6290
Summary:
Ref T1536.
- Allow providers to customize the look of external accounts.
- For username/password auth, don't show the account view (it's confusing and not useful).
- For OAuth accounts, show token status.
Test Plan:
{F47374}
{F47375}
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6289
Summary:
Ref T2852. Give OAuth providers a formal method so you can ask them for tokens; they issue a refresh request if necessary.
We could automatically refresh these tokens in daemons as they near expiry to improve performance; refreshes are blocking in-process round trip requests. If we do this for all tokens, it's a lot of requests (say, 20k users * 2 auth mechanisms * 1-hour tokens ~= a million requests a day). We could do it selectively for tokens that are actually in use (i.e., if we refresh a token in response to a user request, we keep refreshing it for 24 hours automatically). For now, I'm not pursuing any of this.
If we fail to refresh a token, we don't have a great way to communicate it to the user right now. The remedy is "log out and log in again", but there's no way for them to figure this out. The major issue is that a lot of OAuth integrations should not throw if they fail, or can't reasonably be rasied to the user (e.g., activity in daemons, loading profile pictures, enriching links, etc). For now, this shouldn't really happen. In future diffs, I plan to make the "External Accounts" settings page provide some information about tokens again, and possibly push some flag to accounts like "you should refresh your X link", but we'll see if issues crop up.
Test Plan: Used `bin/auth refresh` to verify refreshes. I'll wait an hour and reload a page with an Asana link to verify the auto-refresh part.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2852
Differential Revision: https://secure.phabricator.com/D6280
Summary: Ref T2852. Provide a script for inspecting/debugging OAuth token refresh.
Test Plan: Ran `bin/auth refresh` with various arguments, saw token refreshes.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2852
Differential Revision: https://secure.phabricator.com/D6276
Summary:
- `DoorkeeperObjectRef` is a convenience object to keep track of `<applicationType, applicationDomain, objectType, objectID>` tuples.
- `DoorkeeperBridge` provides pull/push between Phabricator and external systems.
- `DoorkeeperBridgeAsana` is a bridge to Asana.
Test Plan:
Ran this snippet and got a task from Asana:
{P871}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6273
