Summary:
Ref T13266. See <https://discourse.phabricator-community.org/t/notification-page-throws-unrecoverable-fatal-error/2651/>.
The "notifications" query currently uses offset paging for no apparent reason (just a legacy issue?), so some of the paging code is only reachable internally.
- Stop it from using offset paging, since modern cursor paging is fine here (and Feed has used cursor paging for a long time).
- Fix the non-offset paging to work like Feed.
Also:
- Remove a couple of stub methods with no callsites after cursor refactoring.
Test Plan:
- Set things up so I had more than 100 notifications and some in the first 100 were policy filtered, to reproduce the issue (I just made `FeedStory` return `NO_ONE` as a visibility policy).
- Applied the patch, notifications now page cleanly.
- Verified that "Next Page" took me to the right place in the result list.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: hskiba
Maniphest Tasks: T13266
Differential Revision: https://secure.phabricator.com/D20455
Summary:
Ref T13280. In D20421, I changed our observe strategy to `git fetch <uri>` in all cases.
This doesn't work in an ancient, non-bare repository if `master` is checked out and `master` is also fetch: `git` refuses to overwrite the local ref unless we pass `--update-head-ok`. Pass this flag.
Also, remove some code which examines branches and tags in a special way for non-bare working copies. The old `git fetch <origin>` code without explicit revsets meant that `refs/remotes/orgin/heads/xyz` got updated instead of `refs/heads/xyz`. We now update our local refs in all cases (bare and non-bare) so we can throw away this special casing.
Test Plan:
- Replaced a modern bare working copy with a non-bare working copy by explicitly using `git clone` without `--bare`.
- Ran `bin/repository update`, hit the `--update-head-ok` error. Applied the patch, got a clean update.
- Used the "repository.branchquery" API method...
- ...with "contains" to trigger the "git branch" case. Got identical results after removing the special casing.
- ...without "contains" to trigger the "low level ref" case. Got identical results after removing the special casing.
- Grepped for `isWorkingCopyBare()`. The only remaining callsites deal with hook paths, and genuinely need to be specialized.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13280
Differential Revision: https://secure.phabricator.com/D20450
Summary:
Ref T13279. Charting changes alter how the "line-chart" behavior works, but the "Burnup Chart" still relies on the old behavior.
Although I'm intending to remove "Maniphest > Reports" once Facts is a minimally sufficient replacement, copy this behavior to keep it working until we're ready to pull the trigger.
Also fix a leftover typo from D20435.
Test Plan: Viewed a legacy Maniphest burnup rate report.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20449
Summary: This always bugs me when I'm going through `secure` looking for the spiciest macros.
Test Plan: Forced a date to be null, saw reasonable text.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D20453
Summary:
Depends on D20443. Ref T13279. This is probably not terribly useful on its own, but is mostly a function which takes another function as an argument, and a step toward more useful functions like arithmetic and drawing a picture of an owl.
The only structural change here is that functions now read data parameters (domain, sample limit) using a more tailored "ChartDataQuery" instead of reading the actual axis. Mostly, I want a more cohesive representation of query state that can be easily passed to sub-functions, as here.
Test Plan: {F6382432}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20444
Summary:
Depends on D20442. Ref T13279. Add basic support for drawing chart functions that are not based on Facts first-party ETL datasets. Some general goals:
- This might be useful to draw a line like "goal" or "profitability".
- This might be useful to pull data from an external source.
- For composable functions like "add" or "subtract", which are useful in manipulating ETL datasets, these value functions will make testing easier.
Test Plan:
Added a `constant(256)` function:
{F6382408}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20443
Summary:
Depends on D20441. Ref T13279. Currently, we pull all the data, then decide what the X-axis should look like.
Since users will reasonably want to do stuff like "show me march-april 2018" in the future, we need to move toward flipping this around so that we can support cases where the domain is specified by the user.
For actual chart functions (like "constant(3)" or "cos(x)"), we must also know the domain before we pull data, since there are an infinite number of places where we can evaluate the function "constant(3)".
See note in T13279 about continunity.
Test Plan: {F6382356}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20442
Summary:
Depends on D20440. Ref T13279. Create a class to represent a chartable function: something we can get some data points out of.
Then, make the chart chart two functions.
For now, the only supported function is "fact(key)", which pulls data from the Facts ETL pipeline, identified by "key", and takes no other arguments.
In future changes, I plan to support things like "fact(tasks.open.project, PHID-PROJ-xyz)", "constant(1000)" (e.g. to draw a goal line), "sum(fact(...), fact(...))" (to combine data from several projects), and so on.
The UI may not expose this level of power for a while (or maybe ever) but until we get close enough to the UI that these features are a ton of extra work I'm going to try to keep things fairly flexible/modular.
Test Plan: {F6382286}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20441
Summary:
Depends on D20439. Ref T13279. Some day, charts will probably need to reload themselves or do a bunch of defer/request-shaping magic when they're on a dashboard with 900 other charts.
Give the controller separate "HTML placeholder" and "actual data" modes, and make the placeholder fetch the data in a separate request.
Then, make the chart redraw if you resize the window instead of staying at whatever size it started as.
Test Plan:
- Loaded a chart, saw it load data asynchronously.
- Resized the window, saw the chart resize.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20440
Summary:
Ref T13279. I think I'm going to fling some stuff at the wall for a bit here and hope most of it sticks, so this series of changes may not be terribly cohesive or focused. Here:
The range of the chart is locked to "[0, 105% of max]". This is trying to make a pleasing extra margin above the maximum value, but currently just breaks charts with negative values. Later:
- I'll probably let users customize this.
- We should likely select 0 as the automatic minimum for charts with no negative values.
- For charts with positive values, it would be nice to automatically pick a pleasantly round number (25, 100, 1000) as a maximum by default.
We don't have any storage for charts yet. Add some. This works like queries, where every possible configuration gets a short URL slug. Nothing writes or reads this yet.
Rename `fn()` to `css_function()`. This builds CSS functions for D3. The JS is likely to get substantial structural rewrites later on, `fn()` was just particularly offensive.
Test Plan: Viewed a fact series with negative values. Ran `bin/storage upgrade`.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20438
Summary:
Depends on D20434. Fixes T5963. Broadly, the issue here is that when:
- You create a new, empty repository.
- Then, you work on some branch other than `master`, without ever creating `master`.
...you get a warning on `git clone`:
> warning: remote HEAD refers to nonexistent ref, unable to checkout
To fix this, point the symbolic-ref HEAD at `refs/heads/<default-branch>` after installing commit hooks.
This fixes the warning, and also means that `git clone` will check out the repository default branch by default, which is nice.
There are a few caveats about this behavior (see T5963 for discussion) but nothing too substantial.
The only real issue is that Git prevents deletion of the default branch without a config setting. Just set that settting.
Test Plan:
See T5963.
In a repository, set `HEAD` to point somewhere invalid. Ran `bin/repository update ...`. Saw HEAD pointed back at the repository default branch.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T5963
Differential Revision: https://secure.phabricator.com/D20435
Summary:
Depends on D20433. Ref T13277. Since "Autoclose" no longer exists, update the documentation.
Currently, this documentation focuses a lot on troubleshooting because users historically had a lot of trouble with figuring out why things were or were not autoclosing. I haven't seen any real confusion about this in years, so I suspect we may have improved the import pipeline and/or UI to make this less of a problem.
It's also possible that this document "fixed" the problem, but usually I expect a documentation fix to not affect the frequency of reports, just make them easier to resolve, so I doubt it.
If unclear things remain //and// documentation really did fix it, maybe we can fix the issues. Or we can just put the troubleshooting documentation back.
Test Plan: Read documentation.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13277
Differential Revision: https://secure.phabricator.com/D20434
Summary:
Depends on D20432. Ref T13277. Fixes T12967. Removes some "Track Only" hints and warns that the feature is deprecated in favor of "Permanent Refs" and "Fetch Only".
(This "fixes" T12967 by mooting it.)
Test Plan: Viewed "branches" sectino of the manage UI, edited "braches" section of a repository.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13277, T12967
Differential Revision: https://secure.phabricator.com/D20433
Summary:
Depends on D20427. Ref T13277. As an optimization, when we discover that a commit which was previously only on a non-permanent ref ("tmp-epriestley-123") is now reachable from a permanent ref ("master"), we currently queue only a new "message" parse step.
This is an optimization because these commits previously got the full treatment (feed, publish, audit, etc) as soon as they were discovered. Now, those steps only happen once a commit is reachable from a permanent ref, so we need to run everything.
Test Plan:
- Pushed local "tmp-123" branch to remote tag "tmp-123".
- Updated repository with "bin/repository update", saw commit import as a "not on any permanent ref" commit, with no herald/audit/etc.
- Merged "tmp-123" tag into "master".
- Pushed new "master".
- Updated repository with "bin/repository refs ... --trace --verbose", saw commit detected as now reachable from a permament ref.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13277
Differential Revision: https://secure.phabricator.com/D20428
Summary:
Depends on D20426. Ref T13277. The new behavior is to fire Herald only once a commit becomes reachable from a permanent ref (previously, an "Autoclose" branch).
That means that every "Commit" Herald rule implicitly has this field as a condition, and it no longer does anything.
Test Plan: Wrote a Herald rule, saw this as an option in the "Deprecated" section.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13277
Differential Revision: https://secure.phabricator.com/D20427
Summary:
Depends on D20425. Ref T13277. See PHI1067. There's currently no way to retrieve branch/ref rules over the API, which makes some management operations against a large number of repositories difficult.
Expose these rules to the API.
Test Plan: Called `diffusion.repository.search`, got rules in the result set.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13277
Differential Revision: https://secure.phabricator.com/D20426
Summary:
Depends on D20424. Ref T13277. Now that the "Actions" panel only has one item ("Publishing"), just move it to the "Basics" panel.
Update the UI to show active/publishing status more clearly and relate them to one another and importing state.
Test Plan: {F6378087}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13277
Differential Revision: https://secure.phabricator.com/D20425
Summary:
Depends on D20423. Ref T13277. Repositories currently have separate toggles for "Autoclose" and "Publishing".
Merge the "Autoclose" toggle into the "Publishing" toggle. I'm unaware of any valid use case for enabling one but not the other.
(This doesn't fix all the documentation, yet.)
Test Plan: Edited a repository, saw only one publishing option.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13277
Differential Revision: https://secure.phabricator.com/D20424
Summary:
Depends on D20422. Ref T13277. Currently, "track only", "publish", and "autoclose" are three separate ideas. I'd like to generally merge them into a more natural idea called "permanent refs".
Since "Autoclose" effectively now controls both "autoclose" and "publish", rename it.
This doesn't rename all the methods or internals, and the documentation needs an update, but it renames most of the UI-facing stuff.
(You also can only specify branches as "Permanent Refs" today, but we may let you specify tags and other arbitrary refs in the future.)
Test Plan: Grepped, poked around the UI, saw UI show "Permanent" / "Permanent Refs" more often and "Autoclose" less.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13277
Differential Revision: https://secure.phabricator.com/D20423
Summary:
Depends on D20421. Ref T13277. I'd generally like to move away from "Track Only".
Some of the use cases for "Track Only" (or adjacent to "Track Only") are better resolved with "Fetch Rules" -- basically, rules to fetch only some subset of refs from the observed remote.
Add configurable "Fetch Rules" for Git repositories. For example, if you only want to fetch `master`, you can now speify:
```
refs/heads/master
```
If you only want to fetch branches and tags, you can use:
```
refs/heads/*
refs/tags/*
```
In theory, this is slightly less powerful in the general case than "Track Only", but gives us better behavior in some cases (e.g., when the remote has 50K random temporary branches). In practice, I think this and a better "Autoclose Only" will let us move away from "Track Only", get default behavior which is better aligned with what users actually expect, and dodge all the "track tags/refs" questions.
Test Plan: Configured repositories with "Fetch Refs" rules, used `bin/repository pull --verbose --trace ...` to run pulls, saw expected pull/fetch behavior.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13277
Differential Revision: https://secure.phabricator.com/D20422
Summary:
Depends on D20420. Ref T13277. We currently spend substantial effort trying to detect and correct the URL of the "origin" remote in Git repositories.
I believe this is unnecessary, and we can always `git fetch <url> ...` to get the desired result instead of `git muck-with-origin + git fetch origin ...`. We already do this in the more recent parts of the codebase (e.g., intracluster sync) and it works correctly in every case I'm aware of.
Test Plan:
- Grepped for `origin`, ` origin `.
- Ran `bin/repository update ...` to fetch a mirrored repository.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13277
Differential Revision: https://secure.phabricator.com/D20421
Summary:
Depends on D20418. Ref T13277. Fixes T11314.
Currently, when you push commits to some arbitrary ref or tag (like `refs/pull/123` on GitHub, `refs/tags/phabricator/diff/123` on Phabricator, or `refs/changes/whatever` on Gerrit), we do not "autoclose" related objects. This means that we don't process `Ref T123` to create links to tasks, and don't process `Differential Revision: xyz` to close revisions.
However, we //do// still publish these commits. "Publish" means: trigger audits, publish feed stories, and run Herald rules.
- Stop publishing these commits.
- In the UI, show these commits as "Not Permanent" with a note that they are "Not [on any permanent branch]."
These commits will publish and autoclose if they ever become reachable from an "autoclose" ref (most commonly, if they are later merged to "master").
Test Plan:
- Pushed a commit to `refs/tags/quack`.
- Before: got a feed story.
- After: no feed story, UI shows commit as "Not Permanent".
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13277, T11314
Differential Revision: https://secure.phabricator.com/D20419
Summary:
Depends on D20381. Ref T8093. This makes minor improvements to the protocol proxy to handle cases where we add, remove, or replace refs and may need to move the "capabilities" section.
Rather than invoking a callback on every ref: parse the whole ref list into a data structure, mutate it if necessary (in a future diff), then dump it back into wire format.
This allows us to shift the capabilities data (which needs to be coupled with the first ref) around if we modify the first ref, and reorder the reflist alphabetically like git does.
When the server has no refs, Git sends no capabilities data. This is easy to emulate, just surprising.
Test Plan:
Tested the cases not covered by D20381:
- Fetching where the fetch actually fetches data.
- `ls-remote` when we hide the first ref (capabilities data properly moves to the first visible ref).
- `ls-remote` when the remote is empty (we just drop the capabilities frame completely).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T8093
Differential Revision: https://secure.phabricator.com/D20436
Summary:
Depends on D20380. Ref T8093. When prototypes are enabled, inject a (hopefully?) no-op proxy into the Git wire protocol.
This proxy decodes "git upload-pack" and allows the list of references to be rewritten, in a similar way to how we already proxy the Subversion protocol to rewrite URIs and proxy the Mercurial protocol to distinguish between read and write operations.
The piece we care about comes at the beginning, and looks like this:
```
<frame-length><ref-hash> <ref-name>\0<server-capabilities>\n
<frame-length><ref-hash> <ref-name>\n
<frame-length><ref-hash> <ref-name>\n
...
<0000>
```
We can add, remove, or modify this section to make it appear that the server has different refs than the refs that exist on disk.
Things I have tried:
- `git ls-remote`
- `git ls-remote` where the server hides some refs.
- `git fetch` where the fetch is a no-op.
Things I have not tried:
- `git fetch` where the fetch is not a no-op.
- Tricking things into doing protocol v2. Or: I tried this, I wasn't successful. In v2, additional "\0" tricks are used to hide data in the capabilities, I think?
- `git ls-remote` where we rewrite/hide the first ref in the list, and need to move the capabilities frame elsewhere.
- `git ls-remote` where the server has no refs at all, or we remove every ref.
So the "interesting" piece of this works, but it almost certainly needs some cleanup to survive interaction with the real world.
Test Plan: See above.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T8093
Differential Revision: https://secure.phabricator.com/D20381
Summary:
Ref T8093. Support dumping the protocol bytes to a side channel logfile, as a precursor to parsing the protocol and rewriting protocol frames to virtualize refs.
The protocol itself is mostly ASCII text so the raw protocol bytes are pretty comprehensible.
Test Plan:
{F6363221}
{F6363222}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T8093
Differential Revision: https://secure.phabricator.com/D20380
Summary: Ref T7667. Also one text fix.
Test Plan: Ran `bin/auth lock`, didn't get a replacement setup issue.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T7667
Differential Revision: https://secure.phabricator.com/D20447
Summary:
See PHI1134. Generally, "alice added a dependent revision: ..." isn't a very interesting story. This relationship itself is valuable, but the creation of the relationship is usually pretty obvious from context.
In the specific case of PHI1134, various scripts are racing one another, but I don't think this story is of much value in the general case anyway.
Test Plan: Edited parent/child revisions, no more feed stories.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20437
Summary:
Depends on D20419. Ref T13277. Fixes T8936. Fixes T9383. Fixes T12300. When you push arbitrary refs to Phabricator, the push log currently complains if those refs are not tags or branches.
Upstream Git now features "notes", and there's no reason to prevent writes to arbitrary refs, particularly beause we plan to start using them soon (see T13278).
Allow these writes as affecting raw refs.
Test Plan:
- Pushed an arbitrary ref.
- Pushed some Git notes.
- Wrote a Herald ref rule, saw "ref" in the dropdown.
{F6376492}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13277, T8936, T9383, T12300
Differential Revision: https://secure.phabricator.com/D20420
Summary:
Depends on D20416. Ref T13269. See D20329.
If you try to save an "Assign to" rule with no assignee, we currently replace the control with an "InvalidRule" control that isn't editable. We'd prefer to give you an empty field back and let you pick a different value.
Differentiate between "bad record format" (i.e., we can't really do anything with this) and "bad record value" (i.e., everything is structurally fine, you just typed the wrong thing). In the latter case, we still build a properly typed rule for the UI, we just refuse to update storage until you fix the problem.
Test Plan:
First, hit the original issue and got a nicer UI with a more consistent control width (note full-width error):
{F6374205}
Then, applied the rest of the patch and got a normal "fix the issue" form state instead of a dead-end:
{F6374211}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13269
Differential Revision: https://secure.phabricator.com/D20417
Summary:
Ref T12164. Ref T13276. Currently, the parsing pipeline copies the author and committer names and PHIDs into the transcaction record as metadata. They are then rendered directly from the metadata.
This makes planned changes to the parsing pipeline (to prevent races when multiple commits matching a single revision are pushed simultaneously) more difficult, and generally won't work with repository identities.
Instead, load the commit and use its identities.
Test Plan: Loaded a revision, saw the same story rendering for a "Closed by commit" story.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13276, T12164
Differential Revision: https://secure.phabricator.com/D20418
Summary:
Ref T13269. See D20329. When we switch trigger rule control types, reset the rule value.
Also, pick slightly nicer defaults for status/priority.
Test Plan:
- Created a "Change Status To: X" rule.
- Saved it.
- Edited it.
- Selected "Assign to" for the existing action's dropdown.
- Before: tokenizer filled with nonsense.
- After: tokenizer cleared.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13269
Differential Revision: https://secure.phabricator.com/D20416
Summary:
Depends on D20414. Ref T13272. Several minor things here:
- Currently, you can drag panels underneath the invisible "there are no items in this column" div and the "Create Panel / Add Existing Panel" buttons. This is silly; stop it.
- Currently, when viewing a tab panel on a dashboard, you can drag the panels inside it. This is extremely silly. Make "movable" off by default and pass it through the async flow only when we actually need it.
- Make the whole "Add Tab..." virtual tab clickable to open the dropdown. This removes the rare exception/todo combo I added earlier. {key F}
- Add or remove some icons or something.
Test Plan: Moved panels around on dashboards. Tried to drag panels inside tab panels. Added tab. Things were less obviously broken.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20415
Summary:
Depends on D20413. Ref T13272. When you search for stuff, you can "Use Results > Add to Dashboard" to generate a query panel.
This needs some updating after the recent refactoring. All the changes are pretty straightforward. Swaps a giant `<select />` for a tokenizer with a datasource.
Test Plan: Used the "Use Results > Add to Dashboard" flow to create a panel on a dashboard using a query.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20414
Summary:
Depends on D20412. See PHI1147.
- Index the targets of "Add Reviewer", "Add Blocking Reviewer", "Add Auditor", "Add Subscriber", and "Remove Subscriber" Herald rules. My major goal is to get Owners packages. This will also hit projects/users, but we just don't read those edges (for now, at least).
- Add a "Related Herald Rules" panel to Owners Package pages.
- Add a migration to reindex Herald rules for the recent build plan stuff and this, now that such a migration is easy to write.
Test Plan:
Ran migration, verified all rules reindexed.
{F6372695}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D20413
Summary:
Depends on D20411. Ref T13272. Dashboards and panels have new indexes (Ferret and usage edges) that need a rebuild.
For large datasets like commits we have the "activity" flow in T11932, but realistically these rebuilds won't take more than a few minutes on any realistic install so we should be able to just queue them up as migrations.
Let migrations insert a job to basically run `bin/search index --type SomeObjectType`, then do that for dashboards and panels.
(I'll do Herald rules in a followup too, but I want to tweak one indexing thing there.)
Test Plan: Ran the migration, ran `bin/phd debug task`, saw everything get indexed with no manual intervention.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20412
Summary:
Ref T7667. On the road to locking the auth config, also clean up some minor UI issues:
* Only show the warning about not Phacility instance auth if the user isn't a manager (see next diff).
* When rendering more than one warning in the guidance, add bullets.
* I didn't like the text in the `auth.config-lock` config setting.
Test Plan: Loaded the page, saw more reasonable-looking guidance: {F6369405}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T7667
Differential Revision: https://secure.phabricator.com/D20400
Summary:
Depends on D20410. Ref T13272. Dashboards/Panels currently use older "ngram" indexing, which is a less-powerful precursor to Ferret. Throw away the ngram index and provide a Ferret index instead. Also:
- Remove the NUX state, which links to the wrong place now and doesn't seem terribly important.
- Add project tags to the search result list.
- Make the "No Tags" tag a little less conspicious.
Test Plan:
- Indexed dashboards and panels.
- Searched for dashboards and panels via SearchEngine using Ferret "query" field.
- Searched for panels via "Add Existing Panel" datasource typeahead.
- Searched for dashboards via "Add Menu Item > Dashboard" on a ProfileMenu via typeahead.
- Viewed dashboard NUX state (no special state, but no more bad link to "/create/").
- Viewed dashboard list, saw project tags.
- Viewed dashboards with no project tags ("No Tags" is now displayed but less visible).
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20411
Summary: Depends on D20409. Ref T13272. Before "ProfileMenu", dashboards were installed on specific objects using this table. Installs are now handled via ProfileMenu and this table no longer has any meaningful readers. Remove references to the table and destroy it.
Test Plan: Grepped for `DashboardInstall`.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20410
Summary: Depends on D20408. Ref T13272. The actual JS is still a little bit iffy, but this makes the server side "move" operation work correctly by updating it to use the same code as everything else.
Test Plan: Moved panels around on single-column and multi-column dashboards, saw them move to reasonable places and stay there when I reloaded the page.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20409
Summary:
Depends on D20407. Ref T13272. This updates the "add panel" (which has two flavors: "add existing" and "create new") and "remove panel" flows to work with the new duplicate-friendly storage format.
- We now modify panels by "panelKey", not by panel PHID, so one dashboard may have multiple copies of the same panel and we can still figure out what's going on.
- We now work with "contextPHID", not "dashboardID", to make some flows with tab panels (or other nested panels in the future) easier.
The only major remaining flow is the Javascript "move panels around with drag-and-drop" flow.
Test Plan:
- Added panels to a dashboard with "Create New Panel".
- Added panels to a dashboard with "Add Existing Panel".
- Removed panels from a dashboard.
- Added and removed duplicate panels, got a correctly-functioning dashboard that didn't care about duplicates.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20408
Summary:
Depends on D20406. Ref T13272. This gets about half of Dashboards working with the new "duplicate panel friendly" storage format. Followups will fix the write pathways.
Collateral damage here includes:
- Remove the old Dashboard/Panel edge type. We have a new, more general edge type for "container X uses panel Y", and we don't need this edge type for anything else.
- Remove "attachPanels()" from Dashboard. Only rendering actually needs this, and it can just load the panels.
- Remove "attachPanelPHIDs()" from Dashboard. We can look at the panel refs to figure this out.
- Remove "attachProjects()" from Dashboard. Nothing uses this and it's not a very modern approach.
- `getPanelPHIDs()` just looks at the config now.
- Deleted some `LayoutConfig`-related code which is broken/obsolete.
Test Plan:
- Viewed various dashboards which were created before the changes, saw them render correctly.
- Viewed a dashboard with two of the same panel! AMAZING!
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20407
Summary:
Depends on D20405. Ref T13272. Currently, the `PhabricatorDashboardLayoutConfig` class uses a lot of `switch()` statements to define layout modes.
Although I'm not planning to add thousands of new layout modes, this (and upcoming changes) can be made substantially cleaner by using a standard modular approach.
(This doesn't fully remove `PhabricatorDashboardLayoutConfig` yet, but that will happen soon.)
Test Plan: Edited a dashboard, saw the same layout modes as before.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20406
Summary:
Ref T13272. See PHI945. Currently, dashboards tend to break when they have duplicate panels. Partly, this is because all the edit operations operate on a "panelPHID", so there's no way to say "remove the copy of panel X at the bottom of the right-hand column", since the operation is `remove(phid)` and that doesn't point at a specific copy of that panel.
In theory, the code is supposed to prevent duplicate panels, but (a) it doesn't always do this successfully and (b) there's no real reason you can't put duplicate panels on a dashboard if you want. There may even be good reason to do this if you have a "random cat picture" panel or something. Even if you aren't doing this on purpose, it's probably better to let you do it and then fix your mistake by removing the panel you don't want than to prevent the operation entirely.
To simplify this whole mess, I want to just support putting the same panel into multiple places on a dashboard. As a first step, change the storage format so each instance of a panel has a unique "panelKey".
Since each instance of each panel now has its own object, this will also let us give particular instances of panels things like "automatic refresh time" (T5514) or "custom name for this panel on this dashboard" later, if we want. Not clear these are valuable but having this capability can't hurt.
Test Plan:
- `var_dump()`'d the migration, looked at all the results.
- Ran the migration.
NOTE: This breaks dashboards on its own since none of the other code has been changed yet, see followups.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20405
