Summary:
When I create new repos, I always forget which is which (between Callsign and Short Name)
This adds helpful text as a placeholder and as control instructions
I am not sure if this layout is 100% better, but this is an option as well
**Add new Repository**
{F3169761 width=800}
**Edit existing Repository**
{F3169775 width=800}
Closes T15742
Test Plan: Added a new repository and saw these control instructions
Reviewers: O1 Blessed Committers, aklapper
Reviewed By: O1 Blessed Committers, aklapper
Subscribers: aklapper, avivey, tobiaswiese, valerio.bozzolan, Matthew, Cigaryno
Maniphest Tasks: T15742
Differential Revision: https://we.phorge.it/D25898
Summary:
`::class` is available since PHP 5.5 (5.5 is a minimal requirement by Phorge): https://www.php.net/manual/en/language.oop5.basic.php#language.oop5.basic.class.class
It makes finding code using IDEs easier; see discussion in D25500.
Thus replace all string return values with returning the `::class` constant instead, with one exception: 'PhabricatorSettingApplication' in `PhabricatorUserPreferencesSearchEngine.php` does not exist and makes arc lint fail so this string remained unchanged.
Also note that two occurrences were wrapped in `pht()` for reasons I do not know.
List of functions whose return value get updated in this code change:
* getApplicationClassName()
* getAdapterApplicationClass()
* getDatasourceApplicationClass()
* getEditorApplicationClass()
* getEngineApplicationClass()
* getPHIDTypeApplicationClass()
* getQueryApplicationClass()
cf. T15158
Test Plan: Too broad - click around, basically.
Reviewers: O1 Blessed Committers, valerio.bozzolan
Reviewed By: O1 Blessed Committers, valerio.bozzolan
Subscribers: tobiaswiese, valerio.bozzolan, Matthew, Cigaryno
Maniphest Tasks: T15158
Differential Revision: https://we.phorge.it/D25524
Summary:
Depends on D20432. Ref T13277. Fixes T12967. Removes some "Track Only" hints and warns that the feature is deprecated in favor of "Permanent Refs" and "Fetch Only".
(This "fixes" T12967 by mooting it.)
Test Plan: Viewed "branches" sectino of the manage UI, edited "braches" section of a repository.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13277, T12967
Differential Revision: https://secure.phabricator.com/D20433
Summary:
Depends on D20423. Ref T13277. Repositories currently have separate toggles for "Autoclose" and "Publishing".
Merge the "Autoclose" toggle into the "Publishing" toggle. I'm unaware of any valid use case for enabling one but not the other.
(This doesn't fix all the documentation, yet.)
Test Plan: Edited a repository, saw only one publishing option.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13277
Differential Revision: https://secure.phabricator.com/D20424
Summary:
Depends on D20422. Ref T13277. Currently, "track only", "publish", and "autoclose" are three separate ideas. I'd like to generally merge them into a more natural idea called "permanent refs".
Since "Autoclose" effectively now controls both "autoclose" and "publish", rename it.
This doesn't rename all the methods or internals, and the documentation needs an update, but it renames most of the UI-facing stuff.
(You also can only specify branches as "Permanent Refs" today, but we may let you specify tags and other arbitrary refs in the future.)
Test Plan: Grepped, poked around the UI, saw UI show "Permanent" / "Permanent Refs" more often and "Autoclose" less.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13277
Differential Revision: https://secure.phabricator.com/D20423
Summary:
Depends on D20421. Ref T13277. I'd generally like to move away from "Track Only".
Some of the use cases for "Track Only" (or adjacent to "Track Only") are better resolved with "Fetch Rules" -- basically, rules to fetch only some subset of refs from the observed remote.
Add configurable "Fetch Rules" for Git repositories. For example, if you only want to fetch `master`, you can now speify:
```
refs/heads/master
```
If you only want to fetch branches and tags, you can use:
```
refs/heads/*
refs/tags/*
```
In theory, this is slightly less powerful in the general case than "Track Only", but gives us better behavior in some cases (e.g., when the remote has 50K random temporary branches). In practice, I think this and a better "Autoclose Only" will let us move away from "Track Only", get default behavior which is better aligned with what users actually expect, and dodge all the "track tags/refs" questions.
Test Plan: Configured repositories with "Fetch Refs" rules, used `bin/repository pull --verbose --trace ...` to run pulls, saw expected pull/fetch behavior.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13277
Differential Revision: https://secure.phabricator.com/D20422
Summary: Depends on D19856. Ref T13222. See D19829. Make access to "Track Only" slightly cleaner and more consistent..
Test Plan: Set, edited, and removed "Track Only" settings for a repository. Saw sensible persistence and display behaviors.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19857
Summary:
Ref T13222. See D19829. We're inconsistent about using `getDetail()/setDetail()` to do some ad-hoc reads. Put this stuff in proper accessor methods.
Also a couple of text fixes from D19850.
Test Plan: Set, edited, and removed autoclose branches from a repository. Got sensible persistence and rendering behavior.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19856
Summary:
Depends on D19831. Ref T13216. See PHI908. Allegedly, a user copied a large repository into itself and then pushed it. Great backup strategy, but it can create headaches for administrators.
Allow a "maximum paths you can touch with one commit" limit to be configured, to make it harder for users to make this push this kind of commit by accident.
If you actually intended to do this, you can work around this by breaking your commit into pieces (or temporarily removing the limit). This isn't a security/policy sort of option, it's just a guard against silly mistakes.
Test Plan: Set limit to 2, tried to push 3 files, got rejected. Raised limit, pushed changes successfully.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13216
Differential Revision: https://secure.phabricator.com/D19839
Summary: Depends on D19830. Ref T13216. See PHI908. See PHI750. See PHI885. Allow users to configure a filesize limit, and allow them to adjust the clone/fetch timeout.
Test Plan:
{F6021356}
- Configured a filesize limit and pushed, hit it. Made the limit larger and pushed, change went through.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13216
Differential Revision: https://secure.phabricator.com/D19831
Summary:
Ref T13222. See PHI683. Currently, you can "Change subtype..." via Conduit and the bulk editor, but not via the comment action stack or edit forms.
In PHI683 an install is doing this often enough that they'd like it to become a first-class action. I've generally been cautious about pushing this action to become a first-class action (there are some inevitable rough edges and I don't want to add too much complexity if there isn't a use case for it) but since we have evidence that users would find it useful and nothing has exploded yet, I'm comfortable taking another step forward.
Currently, `EditEngine` has this sort of weird `setIsConduitOnly()` method. This actually means more like "this doesn't show up on forms". Make it better align with that. In particular, a "conduit only" field can already show up in the bulk editor, which is goofy. Change this to `setIsFormField()` and convert/simplify existing callsites.
Test Plan:
There are a lot of ways to reach EditEngine so this probably isn't entirely exhaustive, but I think I got pretty much anything which is likely to break:
- Searched for `setIsConduitOnly()` and `getIsConduitOnly()`, converted all callsites to `setIsFormField()`.
- Searched for `setIsLockable()`, `setIsReorderable()` and `setIsDefaultable()` and aligned these calls to intent where applicable.
- Created an Almanac binding.
- Edited an Almanac binding.
- Created an Almanac service.
- Edited an Almanac service.
- Edited a binding property.
- Deleted a binding property.
- Created and edited a badge.
- Awarded and revoked a badge.
- Created and edited an event.
- Made an event recurring.
- Created and edited a Conpherence thread.
- Edited and updated the diff for a revision.
- Created and edited a repository.
- Created and disabled repository URIs.
- Created and edited a blueprint.
- Created and edited tasks.
- Created a paste, edited/archived a paste.
- Created/edited/archived a package.
- Created/edited a project.
- Made comments.
- Moved tasks on workboards via comment action stack.
- Changed task subtype via comment action stack.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19842
Summary:
Fixes T13031. "Enormous" changes are basically changes which are too large to hold in memory, although the actual definition we use today is "more than 1GB of change text or `git diff` runs for more than 15 minutes".
If an install configures a Herald content rule like "when content matches /XYZ/, do something" and then a user pushes a 30 GB source file, we can't put it into memory to `preg_match()` it. Currently, the way to handle this case is to write a separate Herald rule that rejects enormous changes. However, this isn't obvious and means the default behavior is unsafe.
Make the default behavior safe by rejecting these changes with a message, similar to how we reject "dangerous" changes (which permanently delete or overwrite history) by default.
Also, change a couple of UI strings from "Enormous" to "Very Large" to reduce ambiguity. See <https://discourse.phabricator-community.org/t/herald-enormous-check/822>.
Test Plan: Changed the definition of "enormous" from 1GB to 1 byte. Pushed a change; got rejected. Allowed enormous changes, pushed, got rejected by a Herald rule. Disabled the Herald rule, pushed, got a clean push. Prevented enormous changes again. Grepped for "enormous" elsewhere in the UI.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: joshuaspence
Maniphest Tasks: T13031
Differential Revision: https://secure.phabricator.com/D18850
Summary: Noticed a couple of typos in the docs, and then things got out of hand.
Test Plan:
- Stared at the words until my eyes watered and the letters began to swim on the screen.
- Consulted a dictionary.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, yelirekim, PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D18693
Summary: These were once ordered, but I think we switched to being defined in the Engine and never implemented the sorts there. This adds sort ordering to Tasks, Projects, and Repositories.
Test Plan: Review Favorites Menu in local install, see order is now set per the engine. Click Edit Favorites, and re-order. See order sticks.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17490
Summary: Ref T5867. Instead of hard-coding projects, tasks and repositories, let EditEngines say "I want a quick create item" so third-party code can also hook into the menu without upstream changes.
Test Plan: Saw same default items in menu.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5867
Differential Revision: https://secure.phabricator.com/D17215
Summary: Ref T10923. Although I'd ideally like to get rid of this eventually, keep it around for now.
Test Plan:
- Edited value for an SVN repository.
- Observed no panel present for a Git repository.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10923
Differential Revision: https://secure.phabricator.com/D15883
Summary: Ref T10923. Walk users through the "create, configure, activate" workflow a little better and set expectations more clearly.
Test Plan:
- Created a new repository, saw new UI help.
- Activated repository, saw onboarding help disappear.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10923
Differential Revision: https://secure.phabricator.com/D15875
Summary:
Ref T10923. Fixes T10406. This brings most of the guidance/instructions forward:
- Some remained as instructions.
- Some moved to documentation.
Test Plan: Went through all of the sections and hit the help.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10406, T10923
Differential Revision: https://secure.phabricator.com/D15873
Summary:
Ref T10923.
- The "Policy" edit form currently goes "Push, View, Edit". Reorder the defaults to "View, Edit, Push".
- Editing Spaces doesn't currently work: the element appears in the UI, but isn't actually processed when handling transactions. Make that work.
Test Plan:
- Edited a repository policies, saw "View, Edit, Push".
- Moved a repository between Spaces.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10923
Differential Revision: https://secure.phabricator.com/D15866
Summary: Ref T10748. This copies existing code in the `CreateController` which will eventually be removed.
Test Plan:
- Created a new repository with the EditPro workflow.
- Saw it come up into the cluster properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15835
Summary:
Ref T10748. This allows an EditEngine form to be broken up into pages.
This is less powerful than `PHUIPagedFormView`, because the pages are not sequential / stateful. Each form saves immediately once it's submitted, and can not take you to a new form or back/forward in a series of forms.
For example, you can't create a workflow where the user fills out 5 pages of information before we create an object, like the current repository workflow does.
However, the only place we've ever wanted to do this is repositories and it's fairly bad there, so I feel reasonably confident we aren't going to miss this in the future.
(We do "choose a type of service/repository/rule -> fill out one page of info" fairly often, but can do this without the full-power paging stuff.)
Test Plan:
- Created a repository usin the new Manage UI, filling out only a handful of fields.
- Edited a repository using the new Manage UI.
- All forms are now EditEngine forms offering paged views of the big huge underlying form:
{F1254371}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15832
Summary:
Ref T10748. Allow the new EditEngine workflow to create repositories by giving the user a modal repository type choice upfront.
(The rest of this flow is still confusing/weird, though.)
Test Plan:
- Created a new repository.
{F1249626}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15813
Summary: Ref T10748. This brings the "Actions" items (publish/notify + autoclose enabled) into the new UI.
Test Plan:
- Edited this stuff via EditEngine and Conduit.
- Viewed via new Manage UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15811
Summary: Ref T10748. Makes a "Branches" panel, enables these transactions in the EditEngine.
Test Plan:
- Edited via EditEngine + Conduit.
- Viewed via manage UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15809
Summary: Ref T10748. Port this, add EditEngine support, add some type validation to the transaction.
Test Plan:
- Edited via EditEngine.
- Edited via Conduit.
- Viewed via Management UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15808
Summary: Ref T10748. Brings this forward in the UI and EditEngine.
Test Plan:
- Edited via Conduit.
- Viewed via Manage UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15805
Summary: Ref T10748. Ports this UI and exposes it on the EditEngine.
Test Plan:
- Edited via EditEngine.
- Viewed new manage UI.
Reviewers: chad
Reviewed By: chad
Subscribers: hach-que
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15804
Summary: Ref T10748. Brings this over and adds EditEngine support for it.
Test Plan: Viewed and edited staging area information.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15801
Summary:
Ref T10748. This supports more transaction types in the modern editor and improves validation so Conduit benefits.
You can technically create repositories via `diffusion.repository.edit` now, although they aren't very useful.
Test Plan:
- Used `diffusion.repository.edit` to create and edit repositories.
- Used `/editpro/` to edit repositories.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15740
Summary: Ref T10748. Ref T10337. This technically implements this stuff, but it does not do anything useful yet. This skips all the hard stuff.
Test Plan:
- Technically used `diffusion.repository.search` to get repository information.
- Technically used `diffusion.repository.edit` to change a repository name.
- Used `editpro/` to edit a repository name.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10337, T10748
Differential Revision: https://secure.phabricator.com/D15736
