Summary:
Ref T13517. See that task for details about the underlying issue here.
Currently, we may decode a compressed response, then retransmit it with leftover "Content-Encoding" and "Content-Length" headers. Instead, strip these headers.
Test Plan:
- In a clustered repository setup, cloned a Git repository over HTTP.
- Before: Error while processing content unencoding: invalid stored block lengths
- After: Clean clone.
Maniphest Tasks: T13517
Differential Revision: https://secure.phabricator.com/D21167
Summary:
Ref T4369. During T13507, I set my "max_post_size" to a very small value, like 7 (i.e., 7 bytes). This essentially disables "enable_post_data_reading" even if the setting is technically on.
This breaks forms which use "multipart/form-data", which are rare but not nonexistent. Notably, forms in Config use this setting (because of `ui.header` stuff?) although perhaps they should not or no longer need to.
This can be fixed by parsing the raw input.
Since the only reason we don't parse the raw input is concern that we may not be able to read it (per documentation, but never actually observed), and we do a `strlen()` test anyway, just read it unconditionally.
This should fix cases where POST data wasn't read because of "max_post_size" without impacting anything else.
Test Plan: With very small "max_post_size", updated "ui.footer-items" in Config. Before: form acted as a no-op. After: form submitted.
Maniphest Tasks: T4369
Differential Revision: https://secure.phabricator.com/D21165
Summary: Ref T13516. This isn't terribly clean, but get the page footer into the bottom of the content page on FormationView pages so it doesn't overlap into the side panel.
Test Plan: With and without a footer, viewed normal and FormationView pages. Saw footers in appropriate places at appropriate times.
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21166
Summary:
Ref T13455. Viewstates are fairly small and will probably grow less quickly than the changeset table, but the data is also not important to retain in the long term: if you revisit a change several months after hiding some files, it's fine if we've forgotten that you adjusted the view parameters.
Add a GC with a long default collection policy (180 days) so installs can manage the size of this table if it becomes necessary.
Test Plan: Ran via `bin/garbage` to adjust the GC policy and collect viewstates.
Maniphest Tasks: T13455
Differential Revision: https://secure.phabricator.com/D21164
Summary: Ref T13516. Differential got some new UI elements and behaviors, so update static resource package definitions.
Test Plan:
- Saw JS requests drop from 17 to 4.
- Saw CSS requests drop from 9 to 3.
(These won't quite match production since some JS/CSS is for DarkConsole.)
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21163
Summary: Ref T13516. Hide this UI on devices without the screen width to reasonably support it.
Test Plan: Viewed a revision at various window widths, saw the elements vanish at device widths and reappear at desktop widths.
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21162
Summary:
Ref T13516.
- Add an "Add Comment" navigation anchor.
- Make selection state more clear.
- Make hidden state tidier and more clear.
- Hide "View Options" in the hidden state to dodge all the weird behaviors it implies.
- Click to select/deselect changesets.
- When you open the view dropdown menu, then press "h", close the dropdown menu.
Test Plan: Fiddled with all these behaviors.
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21161
Summary:
Ref T13516. Minor improvements here:
- Show key commands in the "View Options" dropdown.
- Organize it slightly better.
- Improve disabled item behaviors a little bit.
- Add a "Browse Directory" action.
- Rename "...in Diffusion" to "...in Repository".
- Make "d", "D", and "h" use the same targeting rules as "\".
- When you hide a file with the "h" menu item, select it.
Test Plan: Poked at the menu a lot, ran into less questionable behavior.
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21160
Summary: See PHI1707, which has a Jupyter notebook which fails to diff nicely when modified. The root cause seems to be that the document does not end in a newline.
Test Plan: Applied patch, diffed the file, got a Jupyter diff out of it.
Differential Revision: https://secure.phabricator.com/D21159
Summary:
Ref T13455. Make "hidden" a changeset property similar to other changeset properties.
We don't need to render this on the server, so we make a request (to update the setting) and just discard the response.
Test Plan: {F7375468}
Maniphest Tasks: T13455
Differential Revision: https://secure.phabricator.com/D21158
Summary: Ref T13516. Mark low-importance changes (generated code, deleted files) and owned-with-authority changes in the filetree.
Test Plan: {F7375327}
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21157
Summary:
Ref T13516. Deletes all old filetree / flex / active / collapse nav code in favor of the new code.
Restores the inline tips in the path tree.
Test Plan: {F7374175}
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21154
Summary: Ref T13516. Apply basic UI styling to the new UI and make some more interaction work.
Test Plan: {F7374096}
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21153
Summary: Ref T13516. Generate a tree structure based on the page changesets. Still missing styles and a whole lot of behavior.
Test Plan: {F7373967}
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21152
Summary: Ref T13516. This glues "FormationView" to "ChangesetList". The actual tree is not functional in any meaningful way yet.
Test Plan: {F7373838}
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21151
Summary:
Ref T13516. Currently, the "File Tree" element is a semi-dynamic side panel that's implemented as a special mode of a side nav panel.
This implementation is fairly clunky, and arose from organic growth out of the side nav. As such, it has some weird behaviors, doesn't have builtin support for show/hide, and can't generalize easily.
Introduce a "FormationView" which supports loading a page up with piles of side panels in various modes.
Test Plan: No callers and no user-visible impact.
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21150
Summary:
Ref T13515. This restores the "Open in Editor" behavior to Diffusion, and makes "\" work there.
The URI pattern is now sent as a structured template to the client, so the code will work properly if a file path contains "%l".
Test Plan:
- Clicked "Open in Editor" and pressed "\" in Diffusion when viewing a file.
- Clicked a line, hit "\", got the file opened to that line.
Maniphest Tasks: T13515
Differential Revision: https://secure.phabricator.com/D21149
Summary:
Ref T13515. Currently, "Open in Editor" only works with a file-level selection.
- If we have a change-level or inline-level selection, open the parent changeset.
- If we have no selection, but the banner is showing something, open the fine shown in the banner.
Test Plan: With files, inlines, changes, and no selection, pressed "\". Saw files pop open in my external editor.
Maniphest Tasks: T13515
Differential Revision: https://secure.phabricator.com/D21148
Summary: Ref T13515. External editor URIs currently depend on repositories having callsigns, but callsigns are no longer required. Add some variables to support configuring this feature for repositories that do not have callsigns.
Test Plan: Changed settings to use new variables, saw links generate appropriately.
Maniphest Tasks: T13515
Differential Revision: https://secure.phabricator.com/D21147
Summary:
Ref T13515.
- Previously valid editor URIs may become invalid without being changed (if an administrator removes a protocol from the list, for example), but this isn't explained very well. Show an error on the settings page if the current value isn't usable.
- Generate a list of functions from an authority in the parser.
- Generate a list of protocols from configuration.
Test Plan: {F7370872}
Maniphest Tasks: T13515
Differential Revision: https://secure.phabricator.com/D21146
Summary:
Ref T13515. Settings currently has some highly specialized code for rendering "Changes saved." messages. The "saved" state is communicated across a redirect-after-POST by adding `/saved/` to the end of the URI.
This isn't great. It needs a lot of moving pieces, including special accommodations in routing rules. It's user-visible. It has the wrong behavior if you reload the page or navigate directly to the "saved" URI.
Try this scheme, which is also pretty sketchy but seems like an upgrade on the balance:
- Set a cookie on the redirect which identifies the form we just saved.
- On page startup: if this cookie exists, save the value and clear it.
- If the current page started with a cookie identifying the form on the page, treat the page as a "saved" page.
This supports passing a small amount of state across the redirect-after-POST flow, and when you reload the page it doesn't keep the message around. Applications don't need to coordinate it, either. Seems somewhat cleaner?
Test Plan: In Firefox, Safari, and Chrome: saved settings, saw a "Saved changes" banner without any URI junk. Reloaded page, saw banner vanish properly.
Maniphest Tasks: T13515
Differential Revision: https://secure.phabricator.com/D21144
Summary:
Ref T13515. Currently, opening a file to a particular line in an external editor relies on replacing "%l" with "%l" (which is escaped as "%25l") on the server, and then replacing "%25l" with the line number on the client. This will fail if the file path (or any other variable) contains "%l" in its unencoded form.
The parser also can't identify invalid variables.
Pull the parser out, formalize it, and make it generate an intermediate representation which can be sent to the client and reconstituted.
(This temporarily breaks Diffusion and permanently removes the weird, ancient integration in Dark Console.)
Test Plan:
- Added a bunch of tests for the actual parser.
- Used "Open in Editor" in Differential.
Maniphest Tasks: T13515
Differential Revision: https://secure.phabricator.com/D21143
Summary: Ref T13515. No callsites actually use this, most editors don't support it, it doesn't seem terribly useful for the ones that do, it makes template-based APIs for line-number substitution complicated, and we can probably just loop on `window.open()` anyway.
Test Plan: Grepped for affected symbols, found no more references. Loaded settings page, saw no more setting.
Maniphest Tasks: T13515
Differential Revision: https://secure.phabricator.com/D21142
Summary:
Ref T13515. Adding "\" ("Open in External Editor") made this slighlty worse, but it was already pretty bad.
Long ago the keys had a special style on them, but this got changed and dropped somewhere around D16568 -- although at the time, I think they still had a grey background (see T11654).
Some later change removed this background.
Put the background back and separate the keystrokes into groups.
Test Plan: {F7370615}
Maniphest Tasks: T13515
Differential Revision: https://secure.phabricator.com/D21141
Summary:
Ref T13515. It's not intuitive that these settings are "Display Preferences", even thought they're intenrally related to some of the other display preferences.
Give them a separate group.
Test Plan: {F7370500}
Maniphest Tasks: T13515
Differential Revision: https://secure.phabricator.com/D21140
Summary:
Ref T13455. Update the other "view state" properties to work like "highlight" now works.
Some complexity here arises from these concerns:
- In "View Standalone", we render the changeset inline. This is useful for debugging/development, and desirable to retain.
- In all other cases, we render the changeset with AJAX.
So the client needs to be able to learn about the "state" properties of the changeset on two different flows. Prior to this change, each pathway had a fair amount of unique code.
Then, some bookkeeping issues:
- At inital rendering time, we may not know which renderer will be selected: it may be based on the client viewport dimensions.
- Prior to this change, the client didn't separate "value of the property for the changeset as rendered" and "desired value of the property".
Test Plan:
- Viewed changes in Differential, Diffusion, and in standalone mode.
- Toggled renderer, character sets, and document engine (this one isn't terribly useful). Reloaded, saw them stick.
- Started typing a comment, cancelled it, hit the undo UI.
Maniphest Tasks: T13455
Differential Revision: https://secure.phabricator.com/D21138
Summary:
Ref T13455. Add container-level storage for persistent view state, and persist "Highlight As..." inside it.
The storage generates a "PhabricatorChangesetViewState" configuration object as an output.
When preferences are expressed on a diff and that diff is later attached to a revision, we attempt to copy the preferences.
The internal storage tracks per-changeset settings, but currently always uses "last update wins" to apply the settings in the UI.
Test Plan:
- Viewed revisions, changed highlighting, reloaded. Saw highlighting stick in revision view and standalone view.
- Viewed commits, changed highlighting, reloaded. Saw highlighting stick.
- Created a diff, changed highlighting, turned it into a revision, saw highlighting persist.
Subscribers: jmeador, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13455
Differential Revision: https://secure.phabricator.com/D21137
Summary:
Ref T13515. We "shield" some changesets, including generated code and intradiffs with no intermediate changes.
These files don't get shielded if they have inline comments.
But, if the viewer has collapsed all the comments, we can shield the file again.
Test Plan:
- Created a change affecting files A and B, with three diffs:
- Touch A and B.
- Touch B only.
- Touch nothing.
- Added an inline to A and collapsed it.
- Viewed Diff 1 vs Diff 2:
- Saw A collapse with a note about inlines.
- Saw B changes, normally.
- Viewed Diff 2 vs Diff 3:
- Saw A collapse with a note about inlines.
- Saw B collapse normally.
- Uncollapsed the inline, viewed 1v2 and 2v3, saw A expand in both cases.
Maniphest Tasks: T13515
Differential Revision: https://secure.phabricator.com/D21136
Summary: Ref T13515. See PHI1661. If a file is selected, add a keystroke to click the "Open in External Editor" link.
Test Plan: In Safari, Chrome, and Firefox: used "J" to select a file, then "\" to open it in an external editor. (In Safari and Chrome, this prompts.)
Maniphest Tasks: T13515
Differential Revision: https://secure.phabricator.com/D21135
Summary: Fixes T13512. Archived packages in Owners are missing hinting, but should have it.
Test Plan:
Before:
{F7369122}
After:
{F7369128}
Maniphest Tasks: T13512
Differential Revision: https://secure.phabricator.com/D21134
Summary:
Fixes T13508. The "Notification" and "Messages" icons in the menu bar have a CSS transition animation on hover.
In Chrome, when this element moves up 2px, you can get a flicker in and out of the hover state if the user's cursor is at the very bottom of the element, since the bounding box for the element is rapidly sliding in and out of the area under the cursor.
To fix this: as we move the element up, also make it taller.
Test Plan: In Safari, Chrome, and Firefox: put my cursor at the very bottom of the element, no longer saw any animation flickering.
Maniphest Tasks: T13508
Differential Revision: https://secure.phabricator.com/D21133
Summary:
Fixes T13510. This migration currently fails because it tries to affect the "paste" database, but when it runs this database will be named "pastebin".
Since the cost of fixing it in place or moving it past the rename migration both seem relatively high (and the cost of throwing it away is plausibly zero) just throw it for now.
Test Plan: Looked at file, saw no more code that can execute.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13510
Differential Revision: https://secure.phabricator.com/D21132
Summary:
Ref PHI1292. Enable fulltext searchs in paste. Maybe this should only index a snippet instead of the entire content?
Also updates table names in `PhabricatorPasteQuery`.
Test Plan: Created some pastes, indexed them, searched for them.
Reviewers: amckinley
Subscribers: codeblock, Korvin, PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D20650
Summary: Ref T13511. Currently, Ferret fulltext field functions (like "title:") are hard-coded. Modularize them so extensions may define new ones.
Test Plan: Added a new custom field which emits data for the indexer, searched for "animal-noises:moo", "animal-noises:-", etc., in global search and application search.
Maniphest Tasks: T13511
Differential Revision: https://secure.phabricator.com/D21131
Summary:
Ref T13511. Ferret functions currently define "aliases", and some applications override the default aliases.
This probably isn't really the right model, since it means the available function aliases in global search depend on the types of documents you're searching for. This isn't fundamentally unworkable but is kind of weird.
Regardless, these don't actually work. Searching for "description:x" is a syntax error.
Since they don't work, it's a good bet no one is relying on them. Just get rid of them until there's a clearer argument for the feature.
Test Plan: Grepped for "getFunctionMap", got no other hits. Ran some queries with the alias functions, got syntax errors.
Maniphest Tasks: T13511
Differential Revision: https://secure.phabricator.com/D21130
Summary:
Ref T13501. Depends on D21127. With the "prefix" behavior removed in D21127, we now have two virtually identical copies of the same code.
The newer one in Ferret is better: it slices utf8 correctly and is slightly more efficient on large inputs. Pull it out and make all callers call into it.
Test Plan:
- Grepped for all affected symbols.
- Ran `bin/search index --force ...` to reindex various objects (tasks, files).
- Searched for things in the UI.
Maniphest Tasks: T13501
Differential Revision: https://secure.phabricator.com/D21128
Summary:
Ref T13501. The older ngram code has some "prefix" behavior that tries to handle cases where a user issues a very short (one or two character) query.
This code doesn't work, presumably never worked, and can not be made to work (or, at least, I don't see a way, and am fairly sure one does not exist).
If the user searches for "xy", we can find trigrams in the form "xy*" using the index, but not in the form "*xy". The code makes a misguided effort to look for " xy", but this will only find "xy" in words that begin with "xy", like "xylophone".
For example, searching Files for "om" does not currently find "random.txt".
Remove this behavior. Without engaging the trigram index, these queries fall back to an unidexed "LIKE" table scan, but that's about the best we can do.
Test Plan: Searched for "om", hit "random.txt".
Maniphest Tasks: T13501
Differential Revision: https://secure.phabricator.com/D21127
Summary: Ref T13511. This function does nothing interesting and has no callers.
Test Plan: Grepped for callers.
Maniphest Tasks: T13511
Differential Revision: https://secure.phabricator.com/D21126
Summary:
Ref T13507. We currently compress normal responses, but do not compress file data responses because most files we serve are images and already compressed.
However, there are some cases where large files may be highly compressible (e.g., huge XML files stored in LFS) and we can benefit from compressing responses.
Make a reasonable guess about whether compression is beneficial and enable compression if we guess it is.
Test Plan:
- Used `curl ...` to download an image with `Accept-Encoding: gzip`. Got raw image data in the response (as expected, because we don't expect images to be worthwhile to recompress).
- Used `curl ...` to download a text file with `Accept-Encoding: gzip`. Got a compressed response. Decompressed the response into the original file.
Maniphest Tasks: T13507
Differential Revision: https://secure.phabricator.com/D21125
Summary:
See <https://discourse.phabricator-community.org/t/storage-upgrade-error/3748>.
It is broadly unsafe for migrations to use "save()". If the object gains new fields later, the query will include "SET newField = X", which will fail against the old schema which is in the process of being upgraded.
Instead, migrations must issue raw SQL against the schema as it is expected to exist at the time the migration executes.
Migrations have followed this rule for a long time, but this ~6 year old migration was overlooked. Update it to issue a raw query to perform the policy update.
Test Plan: This is somewhat flimsy since rebuilding a genuine reproduction case is messy, but used "bin/storage --apply ..." to at least get the new query to execute against modern Phabricator without issues.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D21124
Summary:
See <https://hackerone.com/reports/850114>.
An attacker with administrator privileges can configure "notification.servers" to connect to internal services, either directly or with chosen parameters by selecting an attacker-controlled service and having it issue a "Location" redirect.
Generally, we allow this attack to occur. The same administrator can use an authentication provider or a VCS repository to perform the same attack, and we can't reasonably harden these workflows without breaking things that users expect to be able to do.
There's no reason this particular variation of the attack needs to be allowable, though, and the current behavior isn't consistent with how other similar things work.
- Hide the "notification.servers" configuration, which also locks it. This is similar to other modern service/server configuration.
- Don't follow redirects on these requests. Aphlict should never issue a "Location" header, so if we encounter one something is misconfigured. Declining to follow this header likely makes the issue easier to debug.
Test Plan:
- Viewed configuration in web UI.
- Configured a server that "Location: ..." redirects, got a followed redirect before and a failure afterward.
{F7365973}
Differential Revision: https://secure.phabricator.com/D21123
Summary:
Ref T13507. Now that we handle processing of "Content-Encoding: gzip" headers by default, this setup check can get a decompressed body back. Since it specifically wants a raw body back, disable this behavior.
Also, "@" a couple things which can get in the way if they fail now that error handling is more aggressive about throwing on warnings.
Test Plan: Ran setup check after other changes in T13507, got clean result.
Maniphest Tasks: T13507
Differential Revision: https://secure.phabricator.com/D21122
Summary: Ref T13507. If we believe the server can accept "Content-Encoding: gzip" requests, make the claim in an "X-Conduit-Capabilities" header in responses. Clients can use request compression on subsequent requests.
Test Plan: See D21119 for the client piece.
Maniphest Tasks: T13507
Differential Revision: https://secure.phabricator.com/D21120
Summary: Ref T13507. See that task for discussion.
Test Plan: Faked different response behaviors and hit both variations of this error.
Maniphest Tasks: T13507
Differential Revision: https://secure.phabricator.com/D21116
Summary:
See PHI1692. Currently, the Aphlict log is ridiculously verbose. As an initial pass at improving this:
- When starting in "debug" mode, pass "--debug=1" to Node.
- In Node, separate logging into "log" (lower-volume, more-important messages) and "trace" (higher-volume, less-important messages).
- Only print "trace" messages in "debug" mode.
Test Plan: Ran Aphlict in debug and non-debug modes. Behavior unchanged in debug mode, but log has more sensible verbosity in non-debug mode.
Differential Revision: https://secure.phabricator.com/D21115
Summary:
See PHI1692. Currently, it's hard to get a local profile or "--trace" of some Diffusion API methods, since they always proxy via HTTP -- even if the local node can serve the request.
This always-proxy behavior is intentional (so we always go down the same code path, to limit surprises) but inconvenient when debugging. Allow an operator to connect to a node which can serve a request and issue a `--local` call to force in-process execution.
This makes it straightforward to "--trace" or "--xprofile" the call.
Test Plan: Ran `bin/conduit call ...` with and without `--local` using a Diffusion method on a clustered repository. Without `--local`, saw proxy via HTTP. With `--local`, saw in-process execution.
Differential Revision: https://secure.phabricator.com/D21114
