Summary:
See <https://discourse.phabricator-community.org/t/upgrade-from-sep-30-2016/3702/>. A user performing an upgrade from 2016 to 2020 ran into an issue where this setup query is overheating.
This is likely caused by too many rows changing state during query execution, but the particulars aren't important since this setup check isn't too critical and will catch the issue eventually. It's fine to just move on if this query fails for any reason.
Test Plan: Forced the query to overheat, loaded setup issues, got overheating fatal. Applied patch, no more fatal.
Differential Revision: https://secure.phabricator.com/D21057
Summary:
See PHI1688. If many refs with a large amount of shared ancestry are deleted from a repository, we can spend much longer than necessary marking their mutual ancestors as unreachable over and over again.
For example, if refs A, B and C all point near the head of an obsolete "develop" branch and have about 1K shared commits reachable from no other refs, deleting all three refs will lead to us performing 3,000 mark-as-unreachable operations (once for each "<ref, commit>" pair).
Instead, we can stop exploring history once we reach an already-unreachable commit.
Test Plan:
- Destroyed 7 similar refs simultaneously.
- Ran `bin/repository refs`, saw 7 entries appear in the `oldref` table.
- Ran `bin/repository discover` with some debugging statements added, saw sensible-seeming behavior which didn't double-mark any newly-unreachable refs.
Differential Revision: https://secure.phabricator.com/D21056
Summary:
Depends on D21053. Ref T11968. Three things have changed:
- Overseers can no longer use FutureIterator to continue execution of an arbitrary list of futures from any state. Use FuturePool instead.
- Same with repository daemons.
- Probably (?) fix an API change in the Harbormaster exec future.
Test Plan:
- Ran "bin/phd debug task" and "bin/phd debug pull", no longer saw Future-management related errors.
- The Harbormaster future is easiest to test by just seeing if production works once this change is deployed there.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T11968
Differential Revision: https://secure.phabricator.com/D21054
Summary: Jira allows creating projects which contain number in names, phabricator will not allow such projects but it should
Test Plan: Pasted URL with Jira project which contain number in project name and it was parsed and resolved properly in phabricator
Reviewers: epriestley, Pawka, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D21040
Summary:
Ref T13493. Google returns a lower-quality account identifier ("email") and a higher-quality account identifier ("id"). We currently read only "email".
Change the logic to read both "email" and "id", so that if Google ever moves away from "email" the transition will be a bit easier.
Test Plan: Linked/unlinked a Google account, looked at the external account identifier table.
Maniphest Tasks: T13493
Differential Revision: https://secure.phabricator.com/D21028
Summary:
Fixes T5028. Older versions of Git (apparently, from before 2010) did not provide a way to extract the raw body of a commit message from "git log", so we approximate it with "subject" and "wrapped body".
In newer versions of Git, the raw body can be extracted exactly.
Adjust how we extract messages based on the version of Git, and try to be more faithful to edge cases: particularly, be more careful to extract the correct number of trailing newlines.
Test Plan:
- Added "var_dump()" + "die(1)" later in this method, then pushed various commit messages. Used "&& false" to force execution down the old path (either path should work in modern Git).
- Observed more faithful extraction of messages, including a more faithful extraction of the number of trailing newlines. Extraction is fully faithful if we can go down the "%B" path, which we should be able to in nearly all modern cases.
- Not all messages extract faithfully or consistently across the old and new versions, but the old extraction is destructive so this is likely about as close as we can realistically ever get.
Maniphest Tasks: T5028
Differential Revision: https://secure.phabricator.com/D21027
Summary:
Depends on D21022. Ref T13493. The JIRA API has changed from using "key" to identify users to using "accountId".
By reading both identifiers, this linkage "just works" if you run against an old version of JIRA, a new version of JIRA, or an intermediate version of JIRA.
It also "just works" if you run old JIRA, upgrade to intermediate JIRA, everyone refreshes their link at least once, then you upgrade to new JIRA.
This is a subset of cases and does not include "sudden upgrade to new JIRA", but it's strictly better than the old behavior for all cases it covers.
Test Plan: Linked, unlinked, and logged in with JIRA. Looked at the "ExternalAccountIdentifier" table and saw a sensible value.
Maniphest Tasks: T13493
Differential Revision: https://secure.phabricator.com/D21023
Summary: Depends on D21019. Ref T13493. There are no more barriers to removing readers and writers of "accountID"; the new "ExternalAccountIdentity" table can replace it completely.
Test Plan: Linked and unlinked OAuth accounts, logged in with OAuth accounts, tried to double-link OAuth accounts, grepped for affected symbols.
Maniphest Tasks: T13493
Differential Revision: https://secure.phabricator.com/D21022
Summary:
Depends on D21018. Ref T13493. Ref T6703. The "ExternalAccount" table has a unique key on `<accountType, accountDomain, accountID>` but this no longer matches our model of reality and changes in this sequence end writes to `accountID`.
Remove this key.
Then, remove all readers of `accountType` and `accountDomain` (and all nontrivial writers) because none of these callsites are well-aligned with plans in T6703.
This change has no user-facing impact today: all the rules about linking/unlinking/etc remain unchanged, because other rules currently prevent creation of more than one provider with a given "accountType".
Test Plan:
- Linked an OAuth1 account (JIRA).
- Linked an OAuth2 account (Asana).
- Used `bin/auth refresh` to cycle OAuth tokens.
- Grepped for affected symbols.
- Published an Asana update.
- Published a JIRA link.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13493, T6703
Differential Revision: https://secure.phabricator.com/D21019
Summary: Depends on D21017. Ref T13493. Update the Asana integration so it reads the "ExternalAccountIdentifier" table instead of the old "accountID" field.
Test Plan: Linked an Asana account, used `bin/feed republish` to publish activity to Asana.
Maniphest Tasks: T13493
Differential Revision: https://secure.phabricator.com/D21018
Summary:
Depends on D21015. When we sync an external account and get a list of account identifiers, write them to the database.
Nothing reads them yet and we still write "accountId", this just prepares us for reads.
Test Plan: Linked, refreshed, unlinked, and re-linked an external account. Peeked at the database and saw a sensible-looking row.
Differential Revision: https://secure.phabricator.com/D21016
Summary: Depends on D21014. Ref T13493. Make these objects all use destructible interfaces and destroy sub-objects appropriately.
Test Plan:
- Used `bin/remove destroy --trace ...` to destroy a provider, a user, and an external account.
- Observed destruction of sub-objects, including external account identifiers.
Maniphest Tasks: T13493
Differential Revision: https://secure.phabricator.com/D21015
Summary:
Depends on D21013. Ref T13493. When users log in with most providers, the provider returns an "ExternalAccount" identifier (like an Asana account GUID) and the workflow figures out where to go from there, usually a decision to try to send the user to registration (if the external account isn't linked to anything yet) or login (if it is).
In the case of password providers, the password is really a property of an existing account, so sending the user to registration never makes sense. We can bypass the "external identifier" indirection layer and just say "username -> internal account" instead of "external GUID -> internal mapping -> internal account".
Formalize this so that "AuthProvider" can generate either a "map this external account" value or a "use this internal account" value.
This stops populating "accountID" on "password" "ExternalAccount" objects, but this was only an artifact of convenience. (These records don't really need to exist at all, but there's little harm in going down the same workflow as everything else for consistency.)
Test Plan: Logged in with a username/password. Wiped the external account table and repeated the process.
Maniphest Tasks: T13493
Differential Revision: https://secure.phabricator.com/D21014
Summary:
Depends on D21012. Ref T13493. Currently, auth adapters return a single identifier for each external account.
Allow them to return more than one identifier, to better handle cases where an API changes from providing a lower-quality identifier to a higher-quality identifier.
On its own, this change doesn't change any user-facing behavior.
Test Plan: Linked and unlinked external accounts.
Maniphest Tasks: T13493
Differential Revision: https://secure.phabricator.com/D21013
Summary:
Ref T13493. This check was introduced in D4647, but the condition can never be reached in modern Phabricator because the table has a unique key on `<accountType, accountDomain, accountID>` -- so no row can ever exist with the same value for that tuple but a different ID.
(I'm not entirely sure if it was reachable in D4647 either.)
Test Plan: Used `SHOW CREATE TABLE` to look at keys on the table and reasoned that this block can never have any effect.
Maniphest Tasks: T13493
Differential Revision: https://secure.phabricator.com/D21012
Summary:
Depends on D21010. Ref T13493. External accounts may have multiple different unique identifiers, most often when v1 of the API makes a questionable choice (and provies a mutable, non-unique, or PII identifier) and v2 of the API uses an immutable, unique, random identifier.
Allow Phabricator to store multiple identifiers per external account.
Test Plan: Storage only, see followup changes.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13493
Differential Revision: https://secure.phabricator.com/D21011
Summary:
Ref T13493. The "AuthAccountView" UI element currently exposes raw account ID values, but I'm trying to make these many-to-one.
This isn't terribly useful as-is, so get rid of it. This element could use a design refresh in general.
Test Plan: Viewed the UI element in "External Accounts".
Maniphest Tasks: T13493
Differential Revision: https://secure.phabricator.com/D21010
Summary:
See PHI1647, which asks for "vscode://" to be a configurable protocol on hosted Phacility instances.
I made the configuration editable in D21008, but this can reasonably just come upstream too.
Test Plan: Viewed config in Config, set my editor URI to `vscode://blahblah`.
Differential Revision: https://secure.phabricator.com/D21009
Summary:
Ref T13493. I'm updating callers to `getAccountID()` to prepare to move it to a separate table.
This callsite once supported this flow:
- External users with no accounts send mail to `bugs@`.
- This creates tasks in Maniphest.
- They're CC'd when the tasks are updated.
However, after T12237 we never actually send this mail (since their addresses are necessarily unverified).
I left this code in in case this needed to be revisited, but it hasn't been an issue. Just remove it and treat these users as undeliverable.
Test Plan: As a cursory test for nothing being horribly broken, sent some object mail.
Maniphest Tasks: T13493
Differential Revision: https://secure.phabricator.com/D21007
Summary:
Ref T13395. No library with this name loads any more, so we can't version check it.
(Ideally, the version check stuff would be more graceful when it fails now, since it's required to load "Config" after I moved it off a separate page.)
Test Plan: Loaded "Config".
Maniphest Tasks: T13395
Differential Revision: https://secure.phabricator.com/D20995
Summary: Fixes T2543. This mode has been a stable prototype for a very long time now; promote it so "--draft" can promote out of "experimental" in Arcanist.
Test Plan: See T2543 for discussion.
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D20983
Summary: Ref T13395. Moves a small amount of remaining "libphutil/" code into "phabricator/" and stops us from loading "libphutil/".
Test Plan: Browsed around; there are likely remaining issues.
Maniphest Tasks: T13395
Differential Revision: https://secure.phabricator.com/D20981
Summary: Ref T13395. Move cache classes, syntax highlighters, other markup classes, and sprite sheets to Phabricator.
Test Plan: Attempted to find any callers for any of this stuff in libphutil or Arcanist and couldn't.
Maniphest Tasks: T13395
Differential Revision: https://secure.phabricator.com/D20977
Summary:
`diffusion.branchquery` can return dictionary instead of array if some branches are filtered out.
Eg.:
```
{
"result": [
{
"shortName": "master",
"commitIdentifier": "2817b0d8f79748ddfad0220c46d9b20bea34f460",
"refType": "branch",
"rawFields": {
"objectname": "2817b0d8f79748ddfad0220c46d9b20bea34f460",
"objecttype": "commit",
```
might become:
```
{
"result": {
"1": {
"shortName": "master",
"commitIdentifier": "2817b0d8f79748ddfad0220c46d9b20bea34f460",
"refType": "branch",
"rawFields": {
"objectname": "2817b0d8f79748ddfad0220c46d9b20bea34f460",
"objecttype": "commit",
```
Reproduction - find repository which has couple of branches, setup to track only some of them, execute `diffusion.branchquery` API call - result is dictionary instead of array
Test Plan: Apply patch, execution `diffusion.branchquery` call - result is no longer dictionary if it was one before
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D20973
Summary: Ref T10635. An install with large blocks of remarkup (4MB) in test details is reporting slow page rendering. This is expected, but I've mostly given up on fighting this unless I absolutely have to. Degrade the interface more aggressively.
Test Plan:
- Submitted a large block of test details in remarkup format.
- Before patch: they rendered inline.
- After patch: degraded display.
- Verified small blocks are not changed.
{F7180727}
{F7180728}
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T10635
Differential Revision: https://secure.phabricator.com/D20970
Summary: Ref T13486. Currently, "Zarbo" sorts above "alice", but this isn't expected for a list of (mostly) human usernames.
Test Plan: Loaded a task with subscribers with mixed-case usernames.
Maniphest Tasks: T13486
Differential Revision: https://secure.phabricator.com/D20969
Summary:
Depends on D20966. Ref T13486. Curtains currently render subscribers in a plain text list, but the new ref list element is a good fit for this.
Also, improve the sorting and ordering behavior.
This makes the subscriber list take up a bit more space, but it should make it a lot easier to read at a glance.
Test Plan: Viewed object subscriber lists at varying limits and subscriber counts, saw sensible subscriber lists.
Maniphest Tasks: T13486
Differential Revision: https://secure.phabricator.com/D20967
Summary:
Ref T13486. When a curtain element like "Author" in Maniphest has a very long username, the wrapping and overflow behavior is poor: the date is obscured.
Adjust curtain elements which contain lists of references to other objects to improve wrapping behavior (put the date on a separate line) and overflow behavior (so we get a "..." when a name overflows).
Test Plan: {F7179376}
Maniphest Tasks: T13486
Differential Revision: https://secure.phabricator.com/D20966
Summary: Fixes T13485. GitHub has deprecated the "access_token" URI parameter for API authentication. Update to "Authorization: token ...".
Test Plan: Linked and unlinked a GitHub account locally.
Maniphest Tasks: T13485
Differential Revision: https://secure.phabricator.com/D20964
Summary: Ref T13480. Creating a rule in Herald currently uses the older radio-button flow. Update it to the "clickable menu" flow to simplify it a little bit.
Test Plan: Created new personal, object, and global rules. Hit the object rule error conditions.
Maniphest Tasks: T13480
Differential Revision: https://secure.phabricator.com/D20956
Summary:
Fixes T13463. Currently, if you use the web UI to set "Related Tasks" for a revision, the resulting commit does not link to the tasks.
If you use "Ref ..." in the message instead, the resulting commit does link to the tasks.
Broadly, this should all be cleaner (see T3577) but we can step toward better behavior by just copying these edges when commits are published.
Test Plan:
- Created a revision.
- Used the web UI to edit "Related Tasks".
- Landed the revision.
- Saw the commit link to the tasks as though I'd used "Ref ..." in the message.
Maniphest Tasks: T13463
Differential Revision: https://secure.phabricator.com/D20961
Summary:
Depends on D20933. Ref T13362. This reorganizes Config a bit and attempts to simplify it.
Subsections are now in a landing page console and groupings have been removed. We "only" have 75 values you can edit from the web UI nowadays, which is still a lot, but less overwhelming than it was in the past. And the trend is generally downward, as config is removed/simplified or moved into application settings.
This also gets rid of the "gigantic blobs of JSON in the UI".
Test Plan: Browsed all Config sections.
Maniphest Tasks: T13362
Differential Revision: https://secure.phabricator.com/D20934
Summary: Depends on D20931. Ref T13362. Move all "Console"-style interfaces to use a consistent layout based on a new "LauncherView" which just centers the content.
Test Plan: Viewed all affected interfaces.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13362
Differential Revision: https://secure.phabricator.com/D20933
Summary: Depends on D20930. Ref T13362. Put all the "Services" parts of Config in their own section.
Test Plan: Clicked through each section. This is just an organization / UI change with no significant behavioral impact.
Maniphest Tasks: T13362
Differential Revision: https://secure.phabricator.com/D20931
Summary:
Ref T13362. Config is currently doing a ton of stuff and fairly overwhelming. Separate out "Modules/Extensions" so it can live in its own section.
(This stuff is mostly useful for development and normal users rarely need to end up here.)
Test Plan: Visited seciton, clicked around. This is just a visual change.
Maniphest Tasks: T13362
Differential Revision: https://secure.phabricator.com/D20930
Summary:
Ref T13484. If you load a subproject S which has a mangled/invalid `parentPath`, the query currently tries to execute an empty edge query and fatals.
Instead, we want to deny-by-default in the policy layer but not fail the query. The subproject should become restricted but not fatal anything related to it.
See T13484 for a future refinement where we could identify "broken / data integrity issue" objects explicilty.
Test Plan:
- Modified the `projectPath` of some subproject in the database to `QQQQ...`.
- Loaded that project page.
- Before patch: fatal after issuing bad edge query.
- After patch: "functionally correct" policy layer failure, although an explicit "data integrity issue" failure would be better.
Maniphest Tasks: T13484
Differential Revision: https://secure.phabricator.com/D20963
Summary: Ref T13480. Some Herald fields need audit information, which recent changes to Herald adapters discarded. For now, just load it unconditionally.
Test Plan: Triggered an Audit-related rule locally.
Maniphest Tasks: T13480
Differential Revision: https://secure.phabricator.com/D20962
Summary:
Fixes T13468. See that task for discussion. The older source-rendering code mixes "line number" / "1-based" lists with "block number" / "0-based" lists and then has other bugs which cancel this out.
For block-based diffs, build an explicit block-based mask with only block numbers. This sort of sidesteps the whole issue.
Test Plan: Viewed the diff with the original reproduction case, plus various other block-based diffs, including one-block image diffs, in unified and side-by-side mode. Didn't spot any oddities.
Maniphest Tasks: T13468
Differential Revision: https://secure.phabricator.com/D20959
Summary:
Fixes T13475. Sometimes, we issue a "no op" / "default permit" / "unchallenged" MFA token, when a user with no MFA configured does something which is configured to attempt (but not strictly require) MFA.
An example of this kind of action is changing a username: usernames may be changed even if MFA is not set up.
(Some other operations, notably "Sign With MFA", strictly require that MFA actually be set up.)
When a user with no MFA configured takes a "try MFA" action, we see that they have no factors configured and issue a token so they can continue. This is correct. However, this token causes the assocaited timeline story to get an MFA badge.
This badge is incorrect or at least wildly misleading, since the technical assertion it currently makes ("the user answered any configured MFA challenge to do this, if one exists") isn't explained properly and isn't useful anyway.
Instead, only badge the story if the user actually has MFA and actually responded to some kind of MFA challege. The badge now asserts "this user responded to an MFA challenge", which is expected/desired.
Test Plan:
- As a user with no MFA, renamed a user. Before patch: badged story. After patch: no badge.
- As a user with MFA, renamed a user. Got badged stories in both cases.
Maniphest Tasks: T13475
Differential Revision: https://secure.phabricator.com/D20958
Summary: Fixes T13480. Adds the remaining missing Owners package rules for Herald commit adapters.
Test Plan: Created hooks which care about these fields, pushed commits, saw sensible transcript values.
Maniphest Tasks: T13480
Differential Revision: https://secure.phabricator.com/D20957
Summary: Ref T13480. The Herald "Commit" rules still use raw commit data properties to identify authors and committers. Instead, use repository identities.
Test Plan: Wrote a Herald rule using all four fields, ran it against various commits with and without known authors. Checked transcript for sensible field values.
Maniphest Tasks: T13480
Differential Revision: https://secure.phabricator.com/D20955
Summary:
Ref T13480. Currently, Herald commit hook rules use a raw address resolution query to identify the author and committer for a commit. This will get the wrong answer when the raw identity string has been explicitly bound to some non-default user (most often, it will fail to identify an author when one exists).
Instead, use the "IdentityEngine" to properly resolve identities.
Test Plan: Authored a commit as `X <y@example.com>`, a raw identity with no "natural" matches to users (e.g., no user with that email or username). Bound the identity to a particular user in Diffusion. Wrote a Herald pre-commit content rule, pushed the commit. Saw Herald recognize the correct user when evaluating rules.
Maniphest Tasks: T13480
Differential Revision: https://secure.phabricator.com/D20953
Summary:
Ref T13480. Currently, some Herald field types are rendered in an unfriendly way on transcripts. Particularly, PHID lists are rendered as raw PHIDs.
Improve this by delegating rendering to Value objects and letting "PHID List" value objects render more sensible handle lists. Also improve "bool" fields a bit and make more fields render an explicit "None" / empty value rather than just rendering nothing.
Test Plan: Viewed various transcripts, including transcripts covering boolean values, the "Always" condition, large blocks of text, and PHID lists.
Maniphest Tasks: T13480
Differential Revision: https://secure.phabricator.com/D20951
Summary:
Ref T13480. Currently, when Herald renders a transcript, it puts display labels into array keys. This is a bad pattern for several reasons, notably that the values must be scalar (so you can't add icons or other markup later) and the values must be unique (which is easily violated because many values are translated).
Instead, keep values as list items.
Test Plan: Viewed Herald transcripts, saw no (meaningful) change in rendering output.
Maniphest Tasks: T13480
Differential Revision: https://secure.phabricator.com/D20949
Summary: Ref T13480. When Herald renders rules, it partly uses a very old handle pre-loading mechanism where PHIDs are extracted and loaded upfront. This was obsoleted a long time ago and was pretty shaky even when it worked. Get rid of it to simplify the code a little.
Test Plan: Viewed Herald rules rendered into static text with PHID list actions, saw handles. Grepped for all affected methods.
Maniphest Tasks: T13480
Differential Revision: https://secure.phabricator.com/D20948
Summary: Ref T13480. Add an "Author's packages" field to Herald to support writing rules like "if affected packages include X, and author's packages do not include X, raise the alarm".
Test Plan: Wrote and executed rules with the field, saw a sensible field value in the transcript.
Maniphest Tasks: T13480
Differential Revision: https://secure.phabricator.com/D20947
Summary: Ref T13480. These fields don't serve a specific strong use case, but are broadly reasonable capabilities after "state" vs "change" actions were relaxed by T13283.
Test Plan: Wrote rules using the new fields, added and removed projects (and did neither) to fire them / not fire them. Inspected the transcripts to see the project PHIDs making it to the field values.
Maniphest Tasks: T13480
Differential Revision: https://secure.phabricator.com/D20946
Summary:
Fixes T13479. The behavior of "git rev-parse --show-toplevel" has changed in Git 2.25.0, and it now fails in bare repositories.
Instead, use "git rev-parse --git-dir" to sanity-check the working copy. This appears to have more stable behavior across Git versions, although it's a little more complicated for our purposes.
Test Plan:
- Ran `bin/repository update ...` on an observed, bare repository.
- ...on an observed, non-bare ("legacy") repository.
- ...on a hosted, bare repository.
Maniphest Tasks: T13479
Differential Revision: https://secure.phabricator.com/D20945
Summary: Ref T13472. Ref T13395. These classes are only used by Phabricator and not likely to find much use in Arcanist.
Test Plan: Grepped libphutil and Arcanist for removed symbols.
Maniphest Tasks: T13472, T13395
Differential Revision: https://secure.phabricator.com/D20939
Summary:
See <https://hackerone.com/reports/758002>. The link rules don't test that their parameters are flat text before using them in unsafe contexts.
Since almost all rules are lower-priority than these link rules, this behavior isn't obvious. However, two rules have broadly higher priority (monospaced text, and one variation of link rules has higher priority than the other), and the latter can be used to perform an XSS attack with input in the general form `()[ [[ ... | ... ]] ]` so that the inner link rule is evaluated first, then the outer link rule uses non-flat text in an unsafe way.
Test Plan:
Tested examples in HackerOne report. A simple example of broken (but not unsafe) behavior is:
```
[[ `x` | `y` ]]
```
Differential Revision: https://secure.phabricator.com/D20937
Summary: Maniphest object has `getURI` method, let's use it
Test Plan: Create event in task - URI generated as expected in email notification
Reviewers: epriestley, Pawka, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D20935
Summary:
Ref T13362. Some applications moved to fixed-width a while ago but I was generally unsatisfied with where they ended up and have been pushing them back to full-width.
Push Config back to full-width. Some of the subpages end up a little weird, but this provides more space to work with to make some improvements, like makign `maniphest.statuses` more legible in the UI>
Test Plan: Grepped for `setFixed(`, updated each page in `/config/`. Browsed each controller, saw workable full-width UIs.
Maniphest Tasks: T13362
Differential Revision: https://secure.phabricator.com/D20925
Summary:
See PHI1558. Ref T11860. Ref T13444. I partly implemented PHIDs for "UserEmail" objects, but they can't load on their own so you can't directly `bin/remove destroy` them yet.
Allow them to actually load by implementing "PolicyInterface".
Addresses are viewable and editable by the associated user, unless they are a bot/list address, in which case they are viewable and editable by administrators (in preparation for T11860). This has no real impact on anything today.
Test Plan:
- Used `bin/remove destroy <phid>` to destroy an individual email address.
- Before: error while loading the object by PHID in the query policy layer.
- After: clean load and destroy.
Maniphest Tasks: T13444, T11860
Differential Revision: https://secure.phabricator.com/D20927
Summary: Fixes T13465. This "phlog()" made some degree of sense at one time, but is no longer useful or consistent. Get rid of it. See T13465 for discussion.
Test Plan: Made a conduit call that hit a policy error, no longer saw error in log.
Maniphest Tasks: T13465
Differential Revision: https://secure.phabricator.com/D20924
Summary:
Fixes T13464. Fully-realized paths have a "path" (normalized, effective path) and a "display" path (user-facing, un-normalized path).
During transaction validation we build ref keys for paths before we normalize the "display" values. A few different approaches could be taken to resolve this, but just default the "display" path to the raw "path" if it isn't present since that seems simplest.
Test Plan: Edited paths in an Owners package, no longer saw a warning in the logs.
Maniphest Tasks: T13464
Differential Revision: https://secure.phabricator.com/D20923
Summary: Ref T13444. Allow the effects of performing an identity rebuild to be previewed without committing to any changes.
Test Plan: Ran "bin/repository rebuild-identities --all-identities" with and without "--dry-run".
Maniphest Tasks: T13444
Differential Revision: https://secure.phabricator.com/D20922
Summary:
Fixes T13457. Ref T13444. When we iterate over commits in a particular repository, the default iteration strategy can't effectively use the keys on the table.
Tweak the ordering so the "<repositoryID, epoch, [id]>" key can be used.
Test Plan:
- Ran `bin/audit delete --repository X` and `bin/repository rebuild-identities --repository X` before and after changes.
- With just the key changes, performance was slightly better. My local data isn't large enough to really emphasize the key changes.
- With the page size changes, performance was a bit better (~30%, but on 1-3 second run durations).
- Used `--trace` and ran `EXPLAIN ...` on the new queries, saw them select the "<repositoryID, epoch, [id]>" key and report a bare "Using index condition" in the "Extra" column.
Maniphest Tasks: T13457, T13444
Differential Revision: https://secure.phabricator.com/D20921
Summary:
Ref T13444. Currently, many mutations to users and email addresses (particularly: user creation; and user and address destruction) do not propagate properly to repository identities.
Add hooks to all mutation workflows so repository identities get rebuilt properly when users are created, email addresses are removed, users or email addresses are destroyed, or email addresses are reassigned.
Test Plan:
- Added random email address to account, removed it.
- Added unassociated email address to account, saw identity update (and associate).
- Removed it, saw identity update (and disassociate).
- Registered an account with an unassociated email address, saw identity update (and associate).
- Destroyed the account, saw identity update (and disassociate).
- Added address X to account A, unverified.
- Invited address X.
- Clicked invite link as account B.
- Confirmed desire to steal address.
- Saw identity update and reassociate.
Maniphest Tasks: T13444
Differential Revision: https://secure.phabricator.com/D20914
Summary:
Ref T13444. To interact meaningfully with "DestructionEngine", objects need a PHID. The "UserEmail" object currently does not have one (or a real "Query").
Provide basic PHID support so "DestructionEngine" can interact with the object more powerfully.
Test Plan:
- Ran migrations, checked data in database, saw sensible PHIDs assigned.
- Added a new email address to my account, saw it get a PHID.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13444
Differential Revision: https://secure.phabricator.com/D20913
Summary: Ref T13444. Prepare to hook identity updates when user email addreses are destroyed.
Test Plan:
- Destroyed a user with `bin/remove destroy ... --trace`, saw email deleted.
- Destroyed an email from the web UI, saw email deleted.
Maniphest Tasks: T13444
Differential Revision: https://secure.phabricator.com/D20912
Summary:
Ref T13444. Repository identities have, at a minimum, some bugs where they do not update relationships properly after many types of email address changes.
It is currently very difficult to fix this once the damage is done since there's no good way to inspect or rebuild them.
Take some steps toward improving observability and providing repair tools: allow `bin/repository rebuild-identities` to effect more repairs and operate on identities more surgically.
Test Plan: Ran `bin/repository rebuild-identities` with all new flags, saw what looked like reasonable rebuilds occur.
Maniphest Tasks: T13444
Differential Revision: https://secure.phabricator.com/D20911
Summary: Ref T13444. Send all repository identity/detection through a new "DiffusionRepositoryIdentityEngine" which handles resolution and detection updates in one place.
Test Plan:
- Ran `bin/repository reparse --message ...`, saw author/committer identity updates.
- Added "goose@example.com" to my email addresses, ran daemons, saw the identity relationship get picked up.
- Ran `bin/repository rebuild-identities ...`, saw sensible rebuilds.
Maniphest Tasks: T13444
Differential Revision: https://secure.phabricator.com/D20910
Summary: Ref T13444. This is an ancient event and part of the old event system. It is not likely to be in use anymore, and repository identities should generally replace it nowadays anyway.
Test Plan: Grepped for constant and related methods, no longer found any hits.
Maniphest Tasks: T13444
Differential Revision: https://secure.phabricator.com/D20909
Summary:
Ref T13444. You can currently explicitly unassign an identity (useful if the matching algorithm is misfiring). However, this populates the "currentEffectiveUserPHID" with the "unassigned()" token, which mostly makes things more difficult.
When an identity is explicitly unassigned, convert that into an explicit `null` in the effective user PHID.
Then, realign "assigned" / "effective" language a bit. Previously, `withAssigneePHIDs(...)` actualy queried effective users, which was misleading. Finally, bulk up the list view a little bit to make testing slightly easier.
Test Plan:
- Unassigned an identity, ran migration, saw `currentEffectiveUserPHID` become `NULL` for the identity.
- Unassigned a fresh identity, saw NULL.
- Queried for various identities under the modified constraints.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13444
Differential Revision: https://secure.phabricator.com/D20908
Summary:
Ref T13444. Currently, identities for a particular email address are queried with "LIKE" against a binary column, which makes the query case-sensitive.
- Extract the email address into a separate "sort255" column.
- Add a key for it.
- Make the query a standard "IN (%Ls)" query.
- Deal with weird cases where an email address is 10000 bytes long or full of binary junk.
Test Plan:
- Ran migration, inspected database for general sanity.
- Ran query script in T13444, saw it return the same hits for "git@" and "GIT@".
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13444
Differential Revision: https://secure.phabricator.com/D20907
Summary:
Depends on D20919. Ref T13462. When editing milestones, we currently predict they will have no members for policy evaluation purposes. This isn't the right rule.
Instead, predict that their membership will be the same as the parent project's membership, and pass this hint to the policy layer.
See T13462 for additional context and discussion.
Test Plan:
- Set project A's edit policy to "Project Members".
- Joined project A.
- Tried to create a milestone of project A.
- Before: policy exception that the edit policy excludes me.
- After: clean milestone creation.
- As a non-member, tried to create a milestone. Received appropriate policy error.
Maniphest Tasks: T13462
Differential Revision: https://secure.phabricator.com/D20920
Summary:
Ref T13462. Currently, when testing milestone edit policies during creation, the project object does not behave like a milestone:
- it doesn't have a milestone number yet, so it doesn't try to access the parent project; and
- the parent project isn't attached yet.
Instead: attach the parent project sooner (which "should" be harmless, although it's possible this has weird side effects); and give the adjusted policy object a dummy milestone number if it doesn't have one yet. This forces it to act like a milestone when emitting policies.
Test Plan:
- Set "Projects" application default edit policy to "No One".
- Created a milestone I had permission to create.
- Before: failed with a policy error, because the project behaved like a non-milestone and returned "No One" as the effective edit policy.
- After: worked properly, correctly evaluting the parent project edit policy as the effective edit policy.
- Tried to create a milestone I did not have permission to create (no edit permission on parent project).
- Got an appropriate edit policy error.
Maniphest Tasks: T13462
Differential Revision: https://secure.phabricator.com/D20919
Summary:
Fixes T13461. Some applications provide hints about policy strength in the header, but these hints are inconsistent and somewhat confusing. They don't make much sense for modern objects with Custom Forms, which don't have a single "default" policy.
Remove this feature since it seems to be confusing things more than illuminating them.
Test Plan:
- Viewed various objects, no longer saw colored policy hints.
- Grepped for all removed symbols.
Maniphest Tasks: T13461
Differential Revision: https://secure.phabricator.com/D20918
Summary: Fixes T13456. These edits are remarkup edits and should attach files, trigger mentions, and so on.
Test Plan: Created a text panel, dropped a file in. After changes, saw the file attach properly.
Maniphest Tasks: T13456
Differential Revision: https://secure.phabricator.com/D20906
Summary:
Ref T13454. Fixes T13006. When a user provide us with an SSH private key and (possibly) a passphrase:
# Try to verify that they're correct by extracting the public key.
# If that fails, try to figure out why it didn't work.
Our success in step (2) will vary depending on what the problem is, and we may end up falling through to a very generic error, but the outcome should generally be better than the old approach.
Previously, we had a very unsophisticated test for the text "ENCRYPTED" in the key body and questionable handling of the results: for example, providing a passphrase when a key did not require one did not raise an error.
Test Plan:
Created and edited credentials with:
- Valid, passphrase-free keys.
- Valid, passphrased keys with the right passphrase.
- Valid, passphrase-free keys with a passphrase ("surplus passphrase" error).
- Valid, passphrased keys with no passphrase ("missing passphrase" error).
- Valid, passphrased keys with an invalid passphrase ("invalid passphrase" error).
- Invalid keys ("format" error).
The precision of these errors will vary depending on how helpful "ssh-keygen" is.
Maniphest Tasks: T13454, T13006
Differential Revision: https://secure.phabricator.com/D20905
Summary:
Fixes T13443. When a panel raises an exception during edit action generation, it currently escapes to top level. Instead, catch it more narrowly.
Additionally, mark "ChangesetSearchEngine" as not being a suitable search engine for use in query panels. There's no list view or search URI so it can't generate a sensible panel.
Test Plan:
- Added a changeset panel to a dashboard.
- Before: entire dashboard fataled.
- After: panel fataled narrowly, menu fatals narrowly, dashboard no longer permits creation of another Changeset query panel.
Maniphest Tasks: T13443
Differential Revision: https://secure.phabricator.com/D20902
Summary:
Ref T13442. Ref T13157. There's a secret URI to look at an object's hovercard in a standalone view, but it's hard to remember and impossible to discover.
In developer mode, add an action to "View Hovercard". Also add "View Handle", which primarily shows the object PHID.
Test Plan: Viewed some objects, saw "Advanced/Developer...". Used "View Hovercard" to view hovercards and "View Handle" to view handles.
Maniphest Tasks: T13442, T13157
Differential Revision: https://secure.phabricator.com/D20887
Summary:
Ref T13453. Some of the Asana integrations also need API updates.
Depends on D20899.
Test Plan:
- Viewed "asana.workspace-id" in Config, got a sensible GID list.
- Created a revision, saw the associated Asana task get assigned.
- Pasted an Asana link I could view into a revision description, saw it Doorkeeper in the metadata.
Maniphest Tasks: T13453
Differential Revision: https://secure.phabricator.com/D20900
Summary: Ref T13453. The Asana API has changed, replacing all "id" fields with "gid", including the "users/me" API call result.
Test Plan: Linked an Asana account. Before: error about missing 'id'. After: clean link.
Maniphest Tasks: T13453
Differential Revision: https://secure.phabricator.com/D20899
Summary: Ref T13425. When a change adds or removes a block (vs adding or removing a document, or changing a block), we currently try to render `null` as cell content in the unified view. Make this check broader to catch both "no opposite document" and "no opposite cell".
Test Plan: {F7008772}
Subscribers: artms
Maniphest Tasks: T13425
Differential Revision: https://secure.phabricator.com/D20897
Summary: Ref T13448. Minor UI issue: setting a "Fetch Refs" value does not highlight the associated menu item, but should.
Test Plan: Set only "Fetch Refs", now saw menu item highlighted.
Maniphest Tasks: T13448
Differential Revision: https://secure.phabricator.com/D20895
Summary:
Fixes T13448. We currently "git clone" to initialize repositories, but this will fetch too many refs if "Fetch Refs" is configured.
In modern Phabricator, there's no apparent reason to "git clone"; we can just "git init" instead. This workflow naturally falls through to an update, where we'll do a "git fetch" and pull in exactly the refs we want.
Test Plan:
- Configured an observed repository with "Fetch Refs".
- Destroyed the working copy.
- Ran "bin/repository pull X --trace --verbose".
- Before: saw "git clone" pull in the world.
- After: saw "git init" create a bare empty working copy, then "git fetch" fill it surgically.
Both flows end up in the same place, this one is just simpler and does less work.
Maniphest Tasks: T13448
Differential Revision: https://secure.phabricator.com/D20894
Summary:
Ref T13448. The default behavior of "git fetch '+refs/heads/master:refs/heads/master'" is to follow and fetch associated tags.
We don't want this when we pass a narrow refspec because of "Fetch Refs" configuration. Tell Git that we only want the refs we explicitly passed.
Note that this doesn't prevent us from fetching tags (if the refspec specifies them), it just stops us from fetching extra tags that aren't part of the refspec.
Test Plan:
- Ran "bin/repository pull X --trace --verbose" in a repository with a "Fetch Refs" configuration, saw only "master" get fetched (previously: "master" and reachable tags).
- Ran "git fetch --no-tags '+refs/*:refs/*'", saw tags fetched normally ("--no-tags" does not disable fetching tags).
Maniphest Tasks: T13448
Differential Revision: https://secure.phabricator.com/D20893
Summary:
Ref T13448. When "Fetch Refs" is configured:
- We switch to a narrow mode when running "ls-remote" against the local working copy. This excludes surplus refs, so we'll incorrectly detect that the local and remote working copies are identical in cases where the local working copy really has surplus refs.
- We rely on "--prune" to remove surplus local refs, but it only prunes refs matching the refspecs we pass "git fetch". Since these refspecs are very narrow under "Fetch Only", the pruning behavior is also very narrow.
Instead:
- When listing local refs, always list everything. If we have too much stuff locally, we want to get rid of it.
- When we identify surplus local refs, explicitly delete them instead of relying on "--prune". We can just do this in all cases so we don't have separate "--prune" and "manual" cases.
Test Plan:
- Created a new repository, observed from a GitHub repository, with many tags/refs/branches. Pulled it.
- Observed lots of refs in `git for-each-ref`.
- Changed "Fetch Refs" to "refs/heads/master".
- Ran `bin/repository pull X --trace --verbose`.
On deciding to do something:
- Before: since "master" did not change, the pull declined to act.
- After: the pull detected surplus refs and deleted them. Since the states then matched, it declined further action.
On pruning:
- Before: if the pull was forced to act, it ran "fetch --prune" with a narrow refspec, which did not prune the working copy.
- After: saw working copy pruned explicitly with "update-ref -d" commands.
Also, set "Fetch Refs" back to the default (empty) and pulled, saw everything pull.
Maniphest Tasks: T13448
Differential Revision: https://secure.phabricator.com/D20892
Summary:
Fixes T13446. Currently, the validation logic here rejects a rename like "alice" to "ALICE" (which changes only letter case) but this is a permissible rename.
Allow collisions that collide with the same user to permit this rename.
Also, fix an issue where an empty rename was treated improperly.
Test Plan:
- Renamed "alice" to "ALICE".
- Before: username collision error.
- After: clean rename.
- Renamed "alice" to "orange" (an existing user). Got an error.
- Renamed "alice" to "", "!@#$", etc (invalid usernames). Got sensible errors.
Maniphest Tasks: T13446
Differential Revision: https://secure.phabricator.com/D20890
Summary: Fixes T13445. Make the meaning of this condition more clear, since the current wording is ambiguous between "any of" and "all of".
Test Plan: Edited a Herald rule with a PHID list field ("Project tags"), saw text label say "include none of".
Maniphest Tasks: T13445
Differential Revision: https://secure.phabricator.com/D20889
Summary:
Fixes T13441. Internally, projects can be queried by depth, but this is not exposed in the UI.
Add a "Is root project?" contraint in the UI, and "minDepth" / "maxDepth" constraints to the API.
Test Plan:
- Used the UI to query root projects, got only root projects back.
- Used "project.search" in the API to query combinations of root projects and projects at particular depths, got matching results.
Maniphest Tasks: T13441
Differential Revision: https://secure.phabricator.com/D20886
Summary: Ref T13440. Give the table more obvious visual structure and get rid of the largely useless header columns.
Test Plan: Viewed table, saw a slightly cleaner result.
Maniphest Tasks: T13440
Differential Revision: https://secure.phabricator.com/D20885
Summary: Depends on D20883. Ref T13440. In most cases, all changes belong to the same repository, which makes the "Repository" column redundant and visually noisy. Show repository information in a section header.
Test Plan: {F6989932}
Maniphest Tasks: T13440
Differential Revision: https://secure.phabricator.com/D20884
Summary: Depends on D20882. Ref T13440. Instead of lists of "Differential Revisions" and "Commits", show all changes related to the task in a tabular view.
Test Plan: {F6989816}
Maniphest Tasks: T13440
Differential Revision: https://secure.phabricator.com/D20883
Summary: Ref T13440. This feature is used in only one interface which I'm about to rewrite, so throw it away.
Test Plan: Grepped for all affected symbols, didn't find any hits anywhere.
Maniphest Tasks: T13440
Differential Revision: https://secure.phabricator.com/D20882
Summary:
Ref T12164. Ref T13439. Commit hovercards don't currently show the repository. Although this is sometimes obvious from context, it isn't at other times and it's clearly useful/important.
Also, use identities to render author/committer information and show committer if the committer differs from the author.
Test Plan: {F6989595}
Maniphest Tasks: T13439, T12164
Differential Revision: https://secure.phabricator.com/D20881
Summary:
On fresh installation which doesn't have yet any task closed you will not be able to open charts because of error below:
Fixes:
```
[Mon Oct 21 15:42:41 2019] [2019-10-21 15:42:41] EXCEPTION: (TypeError) Argument 1 passed to head_key() must be of the type array, null given, called in ..phabricator/src/applications/fact/chart/PhabricatorFactChartFunction.php on line 86 at [<phutil>/src/utils/utils.php:832]
[Mon Oct 21 15:42:41 2019] #0 phlog(TypeError) called at [<phabricator>/src/aphront/handler/PhabricatorAjaxRequestExceptionHandler.php:27]
[Mon Oct 21 15:42:41 2019] #1 PhabricatorAjaxRequestExceptionHandler::handleRequestThrowable(AphrontRequest, TypeError) called at [<phabricator>/src/aphront/configuration/AphrontApplicationConfiguration.php:797]
[Mon Oct 21 15:42:41 2019] #2 AphrontApplicationConfiguration::handleThrowable(TypeError) called at [<phabricator>/src/aphront/configuration/AphrontApplicationConfiguration.php:345]
[Mon Oct 21 15:42:41 2019] #3 AphrontApplicationConfiguration::processRequest(AphrontRequest, PhutilDeferredLog, AphrontPHPHTTPSink, MultimeterControl) called at [<phabricator>/src/aphront/configuration/AphrontApplicationConfiguration.php:214]
[Mon Oct 21 15:42:41 2019] #4 AphrontApplicationConfiguration::runHTTPRequest(AphrontPHPHTTPSink) called at [<phabricator>/webroot/index.php:35
```
To fix issue - lets return empty data set instead
Test Plan:
1) Create fresh phabricator installation
2) Create fresh project
3) Try viewing charts
Reviewers: epriestley, Pawka, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, yelirekim
Differential Revision: https://secure.phabricator.com/D20861
Summary:
Ref T13279. See PHI1491. Currently, the top-level "Burnup Rate" chart in Maniphest shows total created tasks above the X-axis, without adjusting for closures.
This is unintended and not very useful. The filtered-by-project charts show the right value (cumulative open tasks, i.e. open minus close). Change the value to aggregate creation events and status change events.
Test Plan: Viewed top-level chart, saw the value no longer monotonically increasing.
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20879
Summary: Ref T13438. This is a sort of minimal plausible implementation.
Test Plan: Used "harbormaster.artifact.search" to query information about artifacts.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13438
Differential Revision: https://secure.phabricator.com/D20878
Summary:
Fixes T13435. If you move Phabricator or copy data from one environment to another, the repository URI index currently still references the old URI, since it writes the URI as a plain string. This may make "arc which" and similar workflows have difficulty identifying repositories.
Instead, store the "phabricator.base-uri" domain and the "diffusion.ssh-host" domain as tokens, so lookups continue to work correctly even after these values change.
Test Plan:
- Added unit tests to cover the normalization.
- Ran migration, ran daemons, inspected `repository_uriindex` table, saw a mixture of sensible tokens (for local domains) and static domains (like "github.com").
- Ran this thing:
```
$ echo '{"remoteURIs": ["ssh://git@local.phacility.com/diffusion/P"]}' | ./bin/conduit call --method repository.query --trace --input -
Reading input from stdin...
>>> [2] (+0) <conduit> repository.query()
>>> [3] (+3) <connect> local_repository
<<< [3] (+3) <connect> 555 us
>>> [4] (+5) <query> SELECT `r`.* FROM `repository` `r` LEFT JOIN `local_repository`.`repository_uriindex` uri ON r.phid = uri.repositoryPHID WHERE (uri.repositoryURI IN ('<base-uri>/diffusion/P')) GROUP BY `r`.phid ORDER BY `r`.`id` DESC LIMIT 101
<<< [4] (+5) <query> 596 us
<<< [2] (+6) <conduit> 6,108 us
{
"result": [
{
"id": "1",
"name": "Phabricator",
"phid": "PHID-REPO-2psrynlauicce7d3q7g2",
"callsign": "P",
"monogram": "rP",
"vcs": "git",
"uri": "http://local.phacility.com/source/phabricator/",
"remoteURI": "https://github.com/phacility/phabricator.git",
"description": "asdf",
"isActive": true,
"isHosted": false,
"isImporting": false,
"encoding": "UTF-8",
"staging": {
"supported": true,
"prefix": "phabricator",
"uri": null
}
}
]
}
```
Note the `WHERE` clause in the query normalizes the URI into "<base-uri>", and the lookup succeeds.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13435
Differential Revision: https://secure.phabricator.com/D20872
Summary:
Ref T13425. The changes in D20865 could incorrectly lead to selection of a DocumentEngine that can not generate document diffs if a file was added or removed (for example, when a source file is added).
Move the engine pruning code to be shared -- we should always discard engines which can't generate a diff, even if we don't have both documents.
Test Plan: Viewed an added source file, no more document ref error arising from document engine selection.
Maniphest Tasks: T13425
Differential Revision: https://secure.phabricator.com/D20866
Summary: Ref T13425. When a file (like a Jupyter notebook) is added or removed, we can still render a useful line-by-line diff.
Test Plan:
- Viewed add/modify/remove of Jupyter, source code, and images in 2up/1up mode, everything looked okay.
Maniphest Tasks: T13425
Differential Revision: https://secure.phabricator.com/D20865
Summary:
Fixes T13431.
Increase the "panel" version of project member lists to 10 users, hide disabled users, swap the buttons to "tail buttons".
Sort disabled users to the bottom of "full list" versions of member lists.
For UI consistency, render the remove "X" as disabled but visible if users don't have permission to remove members.
Test Plan:
- Viewed a project with disabled members.
- Saw only enabled members on the main project page.
- Saw disabled members sorted to the bottom on the members page.
- Clicked "View All" to jump from the panel to the members page.
- As a user who could not edit a project, viewed the members page and saw a disabled "X" with a policy error when clicked.
- Removed a member as before, as a normal user with permission to remove members.
Maniphest Tasks: T13431
Differential Revision: https://secure.phabricator.com/D20864
Summary:
Fixes T13433. Currently, "Login Screen Instructions" in "Auth" are shown only on the main login screen. If you enter a bad password or bad LDAP credential set and move to the flow-specific login failure screen (for example, "invalid password"), the instructions vanish.
Instead, persist them. There are reasonable cases where this is highly useful and the cases which spring to mind where this is possibly misleading are fairly easy to fix by making the instructions more specific.
Test Plan:
- Configured login instructions in "Auth".
- Viewed main login screen, saw instructions.
- Entered a bad username/password and a bad LDAP credential set, got kicked to workflow sub-pages and still saw instructions (previously: no instructions).
- Grepped for other callers to `buildProviderPageResponse()` to look for anything weird, came up empty.
Maniphest Tasks: T13433
Differential Revision: https://secure.phabricator.com/D20863
Summary: Fixes T13430. Provide more information about repositories in "diffusion.repository.search".
Test Plan: Used API console to call method (with new "metrics" attachment), reviewed output. Saw new fields returned.
Maniphest Tasks: T13430
Differential Revision: https://secure.phabricator.com/D20862
Summary:
Ref T13429. It's currently possible to write "TYPE_EDGE" relationships for the "object has project" edge to PHIDs which may not actually be projects. Today, this fatals.
As a first step, unfatal it. T13429 discusses general improvements and greater context.
Test Plan:
Used "maniphest.edit" to write a "project" edge to a user PHID, viewed the task in the UI. Previously it fataled; now it renders unusually (the object is "tagged" with a user) but faithfully reflects database state.
{F6957606}
Maniphest Tasks: T13429
Differential Revision: https://secure.phabricator.com/D20860
Summary: See PHI1499. This error message doesn't provide parameters, and can be a little bit more helpful.
Test Plan: {F6957550}
Differential Revision: https://secure.phabricator.com/D20859
Summary:
Depends on D20853. See PHI1474. If the list of "--not" refs is sufficiently long, we may exceed the maximum size of a command.
Use "--stdin" instead, and swap "--not" for the slightly less readable but functionally equivalent "^hash", which has the advantage of actually working with "--stdin".
Test Plan: Ran `bin/repository refs ...` with nothing to be done, and with something to be done.
Differential Revision: https://secure.phabricator.com/D20854
Summary: See PHI1474. This query can become large enough to exceed reasonable packet limits. Chunk the query so it is split up if we have too many identifiers.
Test Plan: Ran `bin/repository refs ...` on a repository with no new commits and a repository with some new commits.
Differential Revision: https://secure.phabricator.com/D20853
Summary: If portal is created with id > 9 - then those portals are not reachable and always return 404.
Test Plan: Create at least 10 portals, 10th and rest of them will no longer return 404.
Reviewers: epriestley, Pawka, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D20852
Summary: Ref T13425. When we render a diff between two source lines, highlight intraline changes.
Test Plan: Viewed a Jupyter notebook with a code diff in it, saw the changed subsequences in the line highlighted.
Maniphest Tasks: T13425
Differential Revision: https://secure.phabricator.com/D20851
Summary:
See PHI1468. Engine selection for diffs is currently too aggressive in trying to find a shared engine and will fall back a shared engine with a very low score, causing all ".json" files to render as Jupyter files.
Only pick an engine as a difference engine by default if it's the highest-scoring engine for the new file.
Test Plan: Viewed ".json" files and ".ipynb" files in a revision. Before, both rendered as Jupyter. Now, the former rendered as JSON and the latter rendered as Jupyter.
Differential Revision: https://secure.phabricator.com/D20850
Summary:
Depends on D20844. Ref T13425. When we line up two blocks and they can be interdiffed (generally: they both have the same type of content), let the Engine interdiff them.
Then, make the Jupyter engine interdiff markdown.
Test Plan: {F6898583}
Maniphest Tasks: T13425
Differential Revision: https://secure.phabricator.com/D20845
Summary:
Depends on D20843. Ref T13425. Add very basic support for "Show Hidden Context", in the form of folding it behind an unclickable shield. This isn't ideal, but should be better than nothing.
Prepare for "intraline" diffs on content blocks.
Fix newline handling in Markdown sections in Jupyter notebooks.
Remove the word "visibile" from the codebase.
Test Plan: {F6898192}
Maniphest Tasks: T13425
Differential Revision: https://secure.phabricator.com/D20844
Summary:
Ref T13425. Some diff checks currently sequence incorrectly:
- When we're rendering block lists, syntax highlighting isn't relevant.
- The "large change" guard can prevent rendering of otherwise-renderable changes.
- Actual errors in the document engine (like bad JSON in a ".ipynb" file) aren't surfaced properly.
Improve sequencing somewhat to resolve these issues.
Test Plan:
- Viewed a notebook, no longer saw a "highlighting disabled" warning.
- Forced a notebook to fail, got a useful inline error instead of a popup dialog error.
- Forced a notebook to have a large number of differences, got a rendering out of it.
Maniphest Tasks: T13425
Differential Revision: https://secure.phabricator.com/D20843
Summary:
See PHI1442. If you have a bulk-editable datasource field with a composite datasource, it can currently fatal on the bulk edit workflow because the viewer is not passed correctly.
The error looks something like this:
> Argument 1 passed to PhabricatorDatasourceEngine::setViewer() must be an instance of PhabricatorUser, null given, called in /Users/epriestley/dev/core/lib/phabricator/src/applications/typeahead/datasource/PhabricatorTypeaheadCompositeDatasource.php on line 231
Test Plan: Configured a Maniphest custom field with a composite datasource, then tried a bulk edit. Things worked cleanly instead of fataling.
Differential Revision: https://secure.phabricator.com/D20841
Summary:
Ref T13425. Currently, code inputs and all outputs are grouped into a single block. This is fine for display notebooks but not great for diffing notebooks.
Instead, split source code input into individual lines with one line per block, and each output into its own block.
This allows you to leave actual line-by-line inlines on source, and comment on outputs individually.
Test Plan: {F6888583}
Maniphest Tasks: T13425
Differential Revision: https://secure.phabricator.com/D20840
Summary: Depends on D20838. Fixes T13414. Instead of doing coarse diffing with "PhutilEditDistanceMatrix", use hash-and-diff with "DocumentEngine".
Test Plan:
- On a large document (~3K top level blocks), saw a more sensible diff, instead of the whole thing falling back to "everything changed" mode.
- On a small document, still saw a sensible granular diff.
{F6888249}
Maniphest Tasks: T13414
Differential Revision: https://secure.phabricator.com/D20839
Summary:
Depends on D20835. Ref T13425. Ref T13414. When a document has a list of content blocks, we may not be able to diff it directly, but we can hash each block and then diff the hashes (internally "diff" also does approximately the same thing).
We could do this ourselves with slightly fewer layers of indirection, but: diff already exists; we already use it; we already have a bunch of abstractions on top of it; and it's likely much faster on large inputs than the best we can do in PHP.
Test Plan: {F6888169}
Maniphest Tasks: T13425, T13414
Differential Revision: https://secure.phabricator.com/D20836
Summary:
Depends on D20834. Ref T13425. After the change from "th" to "td" for accessibility, the algorithm picks which cells it should highlight slightly improperly (it picks too many cells since it can no longer find the line numbers).
Ideally, it would probably highlight //only// the source content, but there isn't an easy way to do this right now. Settle for an incremental improvement for the moment.
Test Plan: Hovered over line numbers, saw a more accurate highlight area.
Maniphest Tasks: T13425
Differential Revision: https://secure.phabricator.com/D20835
Summary: Depends on D20833. Ref T13425. This look like it "just works"?
Test Plan: Left inline comments on a Juptyer notebook. Nothing seemed broken? Confusing.
Maniphest Tasks: T13425
Differential Revision: https://secure.phabricator.com/D20834
Summary:
Depends on D20832. Ref T13425. Emit Jupyter notebooks as diffable blocks with block keys.
No diffing or proper inlines yet.
Test Plan: {F6888058}
Maniphest Tasks: T13425
Differential Revision: https://secure.phabricator.com/D20833
Summary:
Depends on D20831. Ref T13425. As an escape hatch to get out of future DocumentEngine rendering behavior, provide a "View As.." option.
Now I can break DocumentEngine real bad and no one can complain.
Test Plan: Used "View As" to swap document engines for image files.
Maniphest Tasks: T13425
Differential Revision: https://secure.phabricator.com/D20832
Summary:
Depends on D20830. Ref T13425. Have the image engine elect into block rendering, then emit blocks.
This is rough (the blocks aren't actually diffed yet) but image diffs were already pretty rough so this is approximately a net improvement.
Test Plan: Viewed image diffs, saw nothing worse than before.
Maniphest Tasks: T13425
Differential Revision: https://secure.phabricator.com/D20831
Summary:
Ref T13425. Allow DocumentEngines to claim they can produce diffs. If both sides of a change can be diffed by the same document engine and it can produce diffs, have it diff them.
This has no impact on runtime behavior because no upstream engine elects into diff generation yet.
Test Plan: Loaded some revisions, nothing broke.
Maniphest Tasks: T13425
Differential Revision: https://secure.phabricator.com/D20830
Summary:
Fixes T13284. See that task for substantial discussion. There are currently two cases where we'll skip over commits which we should publish:
- if a branch is not permanent, then later made permanent; or
- in some cases, the first time we examine branches in a repository.
In both cases, this error is one-shot and things work correctly going forward. The root cause is conflation between the states "this ref currently permanent" and "this ref was permanent the last time we updated refs".
Separate these pieces of state and cover all these cases. Also introduce a "--rebuild" flag to fix the state of bad commits.
Test Plan:
See T13284 for the three major cases:
- initial import;
- push changes to a nonpermanent branch, update, then make it permanent;
- push chanegs to a nonpermanent branch, update, push more changes, then make it permanent.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13284
Differential Revision: https://secure.phabricator.com/D20829
Summary: Fixes T13420. Allow installs to provide username change instructions if there's someone you should contact to get this done.
Test Plan: {F6885027}
Maniphest Tasks: T13420
Differential Revision: https://secure.phabricator.com/D20828
Summary: Ref T13420. This workflow currently dead-ends for non-administrators. Instead, provide explanatory text.
Test Plan:
- Clicked "Change Username" as an administrator, same workflow as always.
- Clicked "Change Username" as a non-administrator, got explanatory text.
Maniphest Tasks: T13420
Differential Revision: https://secure.phabricator.com/D20827
Summary:
Ref T13420. These warnings are currently more severe than they need to be; weaken them.
Among other cases, the upstream supports and encourages changing usernames when users change human names.
The login/password instructions are also out of date since sessions were decoupled from usernames about a year ago.
Test Plan: Hit dialog as an administrator
Maniphest Tasks: T13420
Differential Revision: https://secure.phabricator.com/D20826
Summary: Fixes T13423. The "Query" class for conduit call logs is missing a "withIDs()" method.
Test Plan: Paged through Conduit call logs.
Maniphest Tasks: T13423
Differential Revision: https://secure.phabricator.com/D20823
Summary: Ref T13279. Facts is still fairly rough, but not broken/policy-violating, so it can be unprototyped to fix the issue where Maniphest reports (which are now driven by Facts) don't work if prototypes are disabled.
Test Plan: Viewed Maniphest reports and Project reports with prototypes on/off and Fact installed/uninstalled.
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20822
Summary:
Depends on D20818. Ref T13279. The behavior of the "burndown" chart has wandered fairly far afield; make it look more like a burndown.
Move the other thing into an "Activity" chart.
Test Plan: {F6865207}
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20819
Summary:
Ref T13279. Allow engines to choose how areas in a stacked area chart stack on top of one another.
This could also be accomplished by using multiple stacked area datasets, but datasets would still need to know if they're stacking "up" or "down" so it's probably about the same at the end of the day.
Test Plan: {F6865165}
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20818
Summary: Ref T13279. Fix some tabular stuff, draw areas better, make the "compose()" API more consistent, unfatal the demo chart, unfatal the project burndown, make the project chart do something roughly physical.
Test Plan: Looked at charts, saw fewer obvious horrors.
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20817
Summary: Depends on D20815. Ref T13279. Give datapoints "refs", which allow us to figure out where particular datapoints came from even after the point is transformed by functions. For now, show the raw points in a table below the chart.
Test Plan: Viewed chart data, saw reasonable-looking numbers.
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20816
Summary:
Depends on D20814. Currently, "min()" and "max()" are still "min(f, n)". This is no longer consistent with the construction of functions a function-generators that are composed at top level.
Turn them into "min(n)" and "max(n)" (i.e., not higher-order functions).
Then, mark all the functions which are pure mathematical functions and not higher-order as "pure". These functions have no function parameters and do not reference external data. For now, this distinction has no immediate implications, but it will simplify the next change (which tracks where data came from when it originated from an external source -- these pure functions never have any source information, since they only apply pure mathematical transformations to data).
Test Plan: Loaded a burnup chart, nothing seemed obviously broken.
Subscribers: yelirekim
Differential Revision: https://secure.phabricator.com/D20815
Summary: Ref T13279. We currently draw a point on the chart for each datapoint, but this leads to many overlapping circles. Instead, aggregate the raw points into display points ("events") at the end.
Test Plan: Viewed a stacked area chart with many points, saw a more palatable number of drawn dots.
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20814
Summary: Ref T13411. This is a leftover from recent policy rendering changes.
Test Plan: Viewed feed with application policy stories, no more fatal.
Maniphest Tasks: T13411
Differential Revision: https://secure.phabricator.com/D20811
Summary:
Fixes T13415. Provide a way for subtypes to customize the behavior of "Change Subtype" actions that appear above comment areas.
Subtypes may disable this action by specifying `"mutations": []`, or provide a list of subtypes.
The bulk editor and API can still perform any change.
Test Plan:
- Tried to define an invalid "mutations" list with a bad subtype, got a sensible error.
- Specified a limited mutations list and an empty mutations list, verified that corresponding tasks got corresponding actions.
- Used the bulk editor to perform a freeform mutation.
- Verified that tasks of a subtype with no "mutations" still work the same way they used to (allow mutation into any subtype).
Maniphest Tasks: T13415
Differential Revision: https://secure.phabricator.com/D20810
Summary: See PHI1434. For objects that support subtypes and have subtypes configured, allow Herald rules to act on subtypes.
Test Plan:
- Configured task and project subtypes, wrote Herald rules, saw "Subtypes" as an option, saw appropriate typeahead values and detail page rendering.
- Unconfigured project subtypes, saw field vanish from UI for new rules.
- Wrote a "subtype"-depenent rule that added a comment, interacted with tasks of that subtype and a different subtype. Saw Herald act only on tasks with the correct subtype.
Differential Revision: https://secure.phabricator.com/D20809
Summary:
Fixes T7961. Currently, we present Herald users with actions like "Require legalpad signatures" and "Run build plans" even if Legalpad and Harbormaster are not installed.
Instead, allow fields and actions to be made "unavailable", which means that we won't present them as options when adding to new or existing rules.
If you edit a rule which already uses one of these fields or actions, it isn't affected.
Test Plan:
- Created a rule with a legalpad action, uninstalled legalpad, edited the rule. Action remained untouched.
- Created a new rule, wasn't offered the legalpad action.
- Reinstalled the application, saw the action again.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T7961
Differential Revision: https://secure.phabricator.com/D20808
Summary:
Fixes T13411. This looks like the last case where you hit a policy explanation and have permission to see the policy, but we don't currently show you the policy rules.
This implementation is slightly clumsy, but likely harmless.
Test Plan: {F6856421}
Maniphest Tasks: T13411
Differential Revision: https://secure.phabricator.com/D20807
Summary:
Ref T13411. Currently, if you hit a policy exception because you can't view an object, we disclose details about the view policy of the object, particularly which project's members can see the object for project policies.
Although there's a large amount of grey area here, this feels like a more substantial disclosure than we offer in other contexts. Instead, if you encounter a policy exception while testing "CAN_VIEW" or don't have "CAN_VIEW", present an "opaque" explanation which omits details that viewers who can't view the object shouldn't have access to. Today, this is the name of "Project" policies (and, implicitly, the rulesets of custom policies, which we now disclose in other similar contexts).
Test Plan:
- Hit policy exceptions for "CAN_VIEW" on an object with a project view policy, saw an opaque explanation.
- Hit policy exceptions for "CAN_EDIT" on an object with a project edit policy and a view policy I satisfied, saw a more detailed explanation.
Maniphest Tasks: T13411
Differential Revision: https://secure.phabricator.com/D20806
Summary: Ref T13411. When users click a link to explain a capability (like the policy header on many objects, or the link next to specific capabilities in "Applications", "Diffusion", etc), inline the full ruleset for the custom policy into the dialog if the object has a custom policy.
Test Plan: {F6856365}
Maniphest Tasks: T13411
Differential Revision: https://secure.phabricator.com/D20805
Summary:
Ref T13411. This cleans up policy name rendering. We ultimately render into three contexts:
- Plain text contexts, like `bin/policy show`.
- Transaction contexts, where we're showing a policy change. In these cases, we link some policies (like project policies and custom policies) but the links go directly to the relevant object or a minimal explanation of the change. We don't link policies like "All Users".
- Capability contexts, where we're describing a capability, like "Can Push" or cases in Applicaitons. In these cases, we link all policies to the full policy explanation flow.
Test Plan:
- Used `bin/policy show` to examine the policy of an object with a project policy, no longer saw HTML.
- Viewed the transaction logs of Applications (ModularTransactions) and Tasks (not ModularTransactions) with policy edits, including project and custom policies.
- Clicked "Custom Policy" in both logs, got consistent dialogs.
- Viewed application detail pages, saw all capabities linked to explanatory capability dialogs. The value of having this dialog is that the user can get a full explanation of special rules even if the policy is something mundane like "All Users".
Maniphest Tasks: T13411
Differential Revision: https://secure.phabricator.com/D20804
Summary: Ref T13411. This pathway has an unused "icon" parameter with no callsites. Throw it away to ease refactoring.
Test Plan: Grepped for callsites, found none using this parameter.
Maniphest Tasks: T13411
Differential Revision: https://secure.phabricator.com/D20803
Summary:
Ref T13411. These three applications render an "Editable By: <policy>" field in their descriptions.
The pages that these appear on all have "Edit <thing>" actions which either tell you the policy or allow you to discover the policy, and this field is unusual (the vast majority of objects don't have it). I think it largely got copy/pasted or used as space-filler and doesn't offer much of value.
Remove it to simplify/standardize these pages and make changes to how this field works simpler to implement.
Test Plan: Viewed a Credential, Blog, and Space; no longer saw the "Editable By" field.
Maniphest Tasks: T13411
Differential Revision: https://secure.phabricator.com/D20802
Summary:
Ref T13411. Since circa D19829, transactions have rendered policy changes in a modern way, notably making "Custom Policy" clickable to show the policy rules.
Edit transactions in Applications still use a separate, older approach to render policies. This produces policy renderings which don't use modern quoting rules and don't link in a modern way.
Make Applications use the same rendering code that other transactions (like normal edit/view edits) use.
Test Plan: Edited policies in Applications, saw more useful transactions in the log. Clicked "Custom Policy" in the transaction log and got a useful explanation of the policy.
Maniphest Tasks: T13411
Differential Revision: https://secure.phabricator.com/D20801
Summary:
Ref T13410. See PHI1431. Currently, when you move a document in Phriction, the target shows a "This document was moved from ..." banner until it is edited.
This banner isn't particularly useful, and it's distracting and it isn't obvious how to dismiss it, and making a trivial edit to dismiss it is awkward.
This information is also already available in the transaction log.
Just remove this banner since it doesn't really serve any clear purpose.
Test Plan:
- Moved a page in Phriction, then loaded the destination page. Before change: header banner. After change: nothing.
- Viewed a normal (non-moved) page, saw normal behavior.
- Reviewed transactions, saw "Moved from ..." in the timeline.
Maniphest Tasks: T13410
Differential Revision: https://secure.phabricator.com/D20800
Summary:
Fixes T8808. Currently, all project use the default ("Briefcase") project icon when they appear in a policy dropdown.
Since project policies are separated out into a "Members of Projects" section of the dropdown anyway, there is no reason not to use the actual project icon, which is often more clear.
Test Plan: {F6849927}
Maniphest Tasks: T8808
Differential Revision: https://secure.phabricator.com/D20799
Summary:
Fixes T9136.
- Fix a bug where the name is rendered improperly.
- Put disabled rules at the bottom.
- Always show the rule monogram so you can distingiush between rules with the same name.
Test Plan: {F6849915}
Maniphest Tasks: T9136
Differential Revision: https://secure.phabricator.com/D20798
Summary:
Fixes T8952. These feed stories are not interesting and tend to be generated as collateral damage when a non-story update is made to an old task and someone has a "subscribe me" Herald rule.
Also clean up some of the Herald field/condition indexing behavior slightly.
Test Plan: Wrote a "Subscribe X" herald rule, made a trivial update to a task. Before: low-value feed story; after: no feed story.
Maniphest Tasks: T8952
Differential Revision: https://secure.phabricator.com/D20797
Summary: Fixes T13409. This is a companion to the existing "Mark with flag" rule.
Test Plan: Used a "remove flag" rule on an object with no flag (not removed), the right type of flag (removed), and a different type of flag (not removed).
Maniphest Tasks: T13409
Differential Revision: https://secure.phabricator.com/D20796
Summary:
Fixes T13408. Currently, when a package (or other object) appears in a field (rather than an action), it is not indexed.
Instead: index fields too, not just actions.
Test Plan:
- Wrote a rule like "[ Affected packages include ] ...".
- Updated the search index.
- Saw rule appear on "Affected By Herald Rules" on the package detail page.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13408
Differential Revision: https://secure.phabricator.com/D20795
Summary: Fixes T13412. If you search for "https://phabricator.example.com" with no trailing slash, we currently redirect you to "", which is fouled by a safety check in the redirection flow.
Test Plan:
- Searched for "https://local.phacility.com"; before: fatal in redirection; after: clean redirect.
- Searched for other self-URIs, got normal redirects.
Maniphest Tasks: T13412
Differential Revision: https://secure.phabricator.com/D20794
Summary: Fixes T13405. We currently offer non-global custom saved queries here, but this doesn't make sense as a global default setting.
Test Plan: Saved a global search query, edited global search settings, no longer saw the non-global query as an option.
Maniphest Tasks: T13405
Differential Revision: https://secure.phabricator.com/D20793
Summary:
Ref T13404. Except for one known issue in Multimeter, Phabricator appears to function properly in this mode. It is broadly desirable that we run in this mode; it's good on its own, and enabled by default in at least some recent MySQL.
Additionally, "ONLY_FULL_GROUP_BY" and "STRICT_ALL_TABLES" shared a setup key, so ignoring one would ignore both. Change the key so that existing ignores on "ONLY_FULL_GROUP_BY" do not mask "STRICT_ALL_TABLES" warnings.
Test Plan: Grepped for `ONLY_FULL_GROUP_BY`.
Maniphest Tasks: T13404
Differential Revision: https://secure.phabricator.com/D20791
Summary: Ref T13404. Enabling "STRICT_ALL_TABLES" is good, but if you don't want to bother it doesn't matter too much. All upstream development has been on "STRICT_ALL_TABLES" for a long time.
Test Plan: {F6847839}
Maniphest Tasks: T13404
Differential Revision: https://secure.phabricator.com/D20790
Summary: Fixes T13406. On the logout screen, test for no configured providers and warn users they may be getting into more trouble than they expect.
Test Plan:
- Logged out of a normal install and a fresh (unconfigured) install.
{F6847659}
Maniphest Tasks: T13406
Differential Revision: https://secure.phabricator.com/D20789
Summary:
See D20779, https://discourse.phabricator-community.org/t/3089. `bin/config set` complains about
missing config file as if it's un-writable.
Test Plan: run `bin/config set` with missing, writable, unwritable conf.json and parent dir.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D20788
Summary: Fixes T13405. The default behavior of the global search bar isn't currently configurable, but can be made configurable fairly easily.
Test Plan: Changed setting as an administrator, saw setting reflected as a user with no previous preference. As a user with an existing preference, saw preference retained.
Maniphest Tasks: T13405
Differential Revision: https://secure.phabricator.com/D20787
Summary: Ref T13366. The "authorities" mechanism was replaced, but I missed this callsite. Update it to use the request cache mechanism.
Test Plan: As a user without permission to view some initiatives, viewed a list of initiatives.
Maniphest Tasks: T13366
Differential Revision: https://secure.phabricator.com/D20783
Summary: Ref T13404. This query is invalid under "sql_mode=ONLY_FULL_GROUP_BY". Rewrite it to avoid interacting with `actorIdentity` at all; this is a little more robust in the presence of weird data and not really more complicated.
Test Plan:
- Enabled "ONLY_FULL_GROUP_BY".
- Hit system actions (e.g., login).
- Before: error.
- After: clean login.
- Tried to login with a bad password many times in a row, got properly limited by the system action rate limiter.
Maniphest Tasks: T13404
Differential Revision: https://secure.phabricator.com/D20782
Summary: Ref T13403. We currently emit a useful error message, but it's not tailored and has a stack trace. Since this is a relatively routine error and on the first-time-setup path, tailor it so it's a bit nicer.
Test Plan:
- Ran `bin/config set ...` with an unwritable "local.json".
- Ran `bin/config set ...` normally.
Maniphest Tasks: T13403
Differential Revision: https://secure.phabricator.com/D20779
Summary:
Ref T13286. The current (very safe / conservative) rules for retrying git reads generalize to git writes, so we can use the same ruleset in both cases.
Normally, writes converge rapidly to only having good nodes at the head of the list, so this has less impact than the similar change to reads, but it generally improves consistency and allows us to assert that writes which can be served will be served.
Test Plan:
- In a cluster with an up node and a down node, pushed changes.
- Saw a push to the down node fail, retry, and succeed.
- Did some pulls, saw appropriate retries and success.
- Note that once one write goes through, the node which received the write always ends up at the head of the writable list, so nodes need to be explicitly thawed to reproduce the failure/retry behavior.
Maniphest Tasks: T13286
Differential Revision: https://secure.phabricator.com/D20778
Summary: Ref T13286. When retrying a read request, keep retrying as long as we have canididate services. Since we consume a service with each attempt, there's no real reason to abort early, and trying every service allows reads to always succeed even if (for example) 8 nodes of a 16-node cluster are dead because of a severed network link between datacenters.
Test Plan: Ran `git pull` in a clustered repository with an up node and a down node; saw retry count dynamically adjust to available node count.
Maniphest Tasks: T13286
Differential Revision: https://secure.phabricator.com/D20777
Summary:
Depends on D20775. Ref T13286. When a Git read request fails against a cluster and there are other nodes we could safely try, try more nodes.
We DO NOT retry the request if:
- the client read anything;
- the client wrote anything;
- or we've already retried several times.
Although //some// requests where bytes went over the wire in either direction may be safe to retry, they're rare in practice under Git, and we'd need to puzzle out what state we can safely emit.
Since most types of failure result in an outright connection failure and this catches all of them, it's likely to almost always be sufficient in practice.
Test Plan:
- Started a cluster with one up node and one down node, pulled it.
- Half the time, hit the up node and got a clean pull.
- Half the time, hit the down node and got a connection failure followed by a retry and a clean pull.
- Forced `$err = 1` so even successful attempts would retry.
- On hitting the up node, got a "failure" and a decline to retry (bytes already written).
- On hitting the down node, got a failure and a real retry.
- (Note that, in both cases, "git pull" exits "0" after the valid wire transaction takes place, even though the remote exited non-zero. If the server gave Git everything it asked for, it doesn't seem to care if the server then exited with an error code.)
Maniphest Tasks: T13286
Differential Revision: https://secure.phabricator.com/D20776
Summary:
Ref T13286. To support request retries, allow the service lookup method to return an ordered list of structured service references.
Existing callsites continue to immediately discard all but the first reference and pull a URI out of it.
Test Plan: Ran `git pull` in a clustered repository with an "up" node and a "down" node, saw 50% serivce failures and 50% clean pulls.
Maniphest Tasks: T13286
Differential Revision: https://secure.phabricator.com/D20775
Ref T13401. The checkout UI didn't get fully updated to the new View objects,
and account handles are still manually building a URI that goes to the wrong
place.
Summary:
Ref T13393. See some previous discussion in T13366.
Caching is hard and all approaches here have downsides, but the request cache likely has fewer practical downsides for this kind of policy check than other approaches. In particular, the grant approach (at least, as previously used in Phortune) has a major downside that "Query" classes can no longer fully enforce policies.
Since Phortune no longer depends on grants and they've now been removed from instances, drop the mechanism completely.
Test Plan: Grepped for callsites, found none.
Maniphest Tasks: T13393
Differential Revision: https://secure.phabricator.com/D20754
Summary:
Ref T13393. While doing a shard migration in the Phacility cluster, we'd like to stop writes to the migrating repository. It's safe to continue serving reads.
Add a simple maintenance mode for making repositories completely read-only during maintenance.
Test Plan: Put a repository into read-only mode, tried to write via HTTP + SSH. Viewed web UI. Took it back out of maintenance mode.
Maniphest Tasks: T13393
Differential Revision: https://secure.phabricator.com/D20748
Summary:
Fixes T13336.
- Prevent `--no-indexes` from being combined with `--for-replica`, since combining these options can only lead to heartbreak.
- In `--for-replica` mode, dump caches too. See discussion in T13336. It is probably "safe" to not dump these today, but fragile and not correct.
- Mark the "MarkupCache" table as having "Cache" persistence, not "Data" persistence (no need to back it up, since it can be fully regenerated from other datasources).
Test Plan: Ran `bin/storage dump` with various combinations of flags.
Maniphest Tasks: T13336
Differential Revision: https://secure.phabricator.com/D20743
Summary:
Fixes T13389. Currently, we try to "newSubtypeMap()" unconditionally, even if the underlying object does not support subtypes.
- Only try to build a subtype map if subtype transactions are actually being applied.
- When subtype transactions are applied to a non-subtypable object, fail more explicitly.
Test Plan: Clicked "Make Editable" in a fresh Calendar transaction form, got an editable form instead of a fatal from "newSubtypeMap()". (Calendar events are not currently subtypable.)
Maniphest Tasks: T13389
Differential Revision: https://secure.phabricator.com/D20741
Summary:
Depends on D20739. Ref T13366. Slightly modularize/update components of order views, and make orders viewable from either an account context (existing view) or an external context (new view).
The new view is generally simpler so this mostly just reorganizes existing code.
Test Plan: Viewed orders as an account owner and an external user.
Maniphest Tasks: T13366
Differential Revision: https://secure.phabricator.com/D20740
Summary: Depends on D20738. Ref T13366. Fixes T8389. Now that the infrastructure is in place, actually send email to external addresses.
Test Plan: Used `bin/phortune invoice` to generate invoices and saw associated external accounts receive mail in `bin/mail list-outbound`.
Maniphest Tasks: T13366, T8389
Differential Revision: https://secure.phabricator.com/D20739
Summary: Depends on D20737. Ref T13367. Allow external addresses to have their access key rotated. Account managers can disable them, and anyone with the link can permanently unsubscribe them.
Test Plan: Enabled/disabled addresses; permanently unsubscribed addresses.
Maniphest Tasks: T13367
Differential Revision: https://secure.phabricator.com/D20738
Summary: Ref T13366. This gives each account email address an "external portal" section so they can access invoices and receipts without an account.
Test Plan: Viewed portal as user with authority and in an incognito window.
Maniphest Tasks: T13366
Differential Revision: https://secure.phabricator.com/D20737
Summary:
Depends on D20734. Ref T13366. This makes the cart/order flow work under the new policy scheme with no "grantAuthority()" calls.
It prepares for a "Void Invoice" action, although the action doesn't actually do anything yet.
Test Plan: With and without merchant authority, viewed and paid invoices and went through the other invoice interaction workflows.
Maniphest Tasks: T13366
Differential Revision: https://secure.phabricator.com/D20735
Summary: Refresh the 404 text since it hasn't been updated in a while, and swap the "Save Query" button back to grey since I never got used to blue.
Test Plan: Hit 404 page, saved a query.
Differential Revision: https://secure.phabricator.com/D20734
Summary:
Depends on D20732. Ref T13366. This generally makes the "Merchant" UI look and work like the "Payment Account" UI.
This is mostly simpler since the permissions have largely been sorted out already and there's less going on here and less weirdness around view/edit policies.
Test Plan: Browsed all Merchant functions as a merchant member and non-member.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13366
Differential Revision: https://secure.phabricator.com/D20733
Summary:
Ref T13366. Depends on D20721. Continue applying UI and policy updates to the last two Phortune objects.
Charges aren't mutable and Carts are already transactional, so this is less involved than prior changes.
Test Plan: Viewed various charge/order interfaces as merchants and account members.
Maniphest Tasks: T13366
Differential Revision: https://secure.phabricator.com/D20732
Summary:
Depends on D20720. Ref T13366.
- Use modern policies and policy interfaces.
- Use new merchant authority cache.
- Add (some) transactions.
- Move MFA from pre-upgrade-gate to post-one-shot-check.
- Simplify the autopay workflow.
- Use the "reloading arrows" icon for subscriptions more consistently.
Test Plan: As a merchant-authority and account-authority, viewed, edited, and changed autopay for subscriptions.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13366
Differential Revision: https://secure.phabricator.com/D20721
Summary:
Depends on D20718. Ref T13366. Ref T13367.
- Phortune payment methods currently do not use transactions; update them.
- Give them a proper view page with a transaction log.
- Add an "Add Payment Method" button which always works.
- Show which subscriptions a payment method is associated with.
- Get rid of the "Active" status indicator since we now treat "disabled" as "removed", to align with user expectation/intent.
- Swap out of some of the super weird div-form-button UI into the new "big, clickable" UI for choice dialogs among a small number of options on a single dimension.
Test Plan:
- As a mechant-authority and account-authority, created payment methods from carts, subscriptions, and accounts. Edited and viewed payment methods.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13367, T13366
Differential Revision: https://secure.phabricator.com/D20719
Summary:
Depends on D20717. Ref T13366. Make PhortunePaymentMethod use an extended policy interface for consistency with modern approaches. Since Accounts have hard-coded policy behavior (and can't have object policies like "Subscribers") this should have no actual impact on program behavior.
This leaves one weird piece in the policy dialog UIs, see T13381.
Test Plan: Viewed and edited payment methods as a merchant and account member. Merchants can only view, not edit.
Maniphest Tasks: T13366
Differential Revision: https://secure.phabricator.com/D20718
Summary: Depends on D20716. Ref T13366. This implements the new policy behavior cleanly in all top-level Phortune payment account interfaces.
Test Plan: As a merchant with an account relationship (not an account member) and an account member, browsed all account interfaces and attempted to perform edits. As a merchant, saw a reduced-strength view.
Maniphest Tasks: T13366
Differential Revision: https://secure.phabricator.com/D20717
Summary:
Depends on D20715. Ref T13366. See that task for discussion.
Replace the unreliable "grantAuthority()"-based check with an actual "can the viewer edit any merchant this account has a relationship with?" check.
This makes these objects easier to use from a policy perspective and makes it so that the `Query` alone can fully enforce permissions properly with no setup, so general infrastructure (like handles and transactions) works properly with Phortune objects.
Test Plan: Viewed merchants and accounts as users with no authority, direct authority on the account, and indirect authority via a merchant relationship.
Maniphest Tasks: T13366
Differential Revision: https://secure.phabricator.com/D20716
Summary:
Depends on D20713. Ref T13366. When a payment account establishes a relationship with a merchant by creating a cart or subscription, create an edge to give the merchant access to view the payment account.
Also, migrate all existing subscriptions and carts to write these edges.
This aims at straightening out Phortune permissions, which are currently a bit wonky on a couple of dimensions. See T13366 for detailed discussion.
Test Plan:
- Created and edited carts/subscriptions, saw edges write.
- Ran migrations, saw edges write.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13366
Differential Revision: https://secure.phabricator.com/D20715
Summary: Depends on D20697. Ref T8389. Add support for adding "billing@enterprise.com" and similar to Phortune accounts.
Test Plan: Added and edited email addresses for a payment account.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T8389
Differential Revision: https://secure.phabricator.com/D20713
Summary:
Ref T13366. Some of the information architecture is a little muddy here, notably an item called "Billing / History" which contains payment methods.
Split things up a bit to prepare for adding support for "Email Addresses".
Test Plan: {F6676988}
Maniphest Tasks: T13366
Differential Revision: https://secure.phabricator.com/D20697
Summary: See PHI1396. Ideally this would be some kind of general-purpose tie-in to object relationships, but see D18456 for precedent.
Test Plan: Used `maniphest.edit` to edit associated commits for a task.
Differential Revision: https://secure.phabricator.com/D20731
Summary:
Fixes T13386. See PHI1391. These constraints largely exist already, but are not yet exposed to Conduit.
Also, tweak some keys to support the underlying query.
Test Plan: Ran `differential.revision.search` queries with the new constraints.
Maniphest Tasks: T13386
Differential Revision: https://secure.phabricator.com/D20730
Summary: Ref T13382. Currently, the "Make Administrator" action in the web UI does state-based MFA. Convert it to one-shot MFA.
Test Plan: Empowered and unempowered a user from the web UI, got one-shot MFA'd. Empowered a user from the CLI, no MFA issues.
Maniphest Tasks: T13382
Differential Revision: https://secure.phabricator.com/D20729
Summary:
Ref T13385. Currently, if you run `arc diff` in a CWD with more than 255 characters, the workflow fatals against the length of the `sourcePath` database column.
In the long term, removing this property is likely desirable.
For now, truncate long values and continue. This only meaningfully impacts relatively obscure interactive SVN workflows negatively, and even there, "some arc commands are glitchy in very long working directories in SVN" is still better than "arc diff fatals".
Test Plan:
- Modified `arc` to submit very long source paths.
- Ran `arc diff`.
- Before: Fatal when inserting >255 characters into `sourcePath`.
- After: Path truncated at 255 bytes.
Maniphest Tasks: T13385
Differential Revision: https://secure.phabricator.com/D20727
Summary:
Ref T13382.
- Remove "bin/people profileimage" which previously generated profile image caches but now feels obsolete.
- Replace it with "bin/user", with "enable" and "empower" flows. This command is now focused on regaining access to an install after you lock your keys inside.
- Document the various ways to unlock objects and accounts from the CLI.
Test Plan:
- Ran `bin/user enable` and `bin/user empower` with various flags.
- Grepped for `people profileimage` and found no references.
- Grepped for `bin/people` and found no references.
- Read documentation.
Maniphest Tasks: T13382
Differential Revision: https://secure.phabricator.com/D20724
Summary: Fixes T13383. Provide a basic "drydock.resource.search". Also allow "drydock.lease.search" to be queried by resource PHID.
Test Plan: Called "drydock.resource.search" and "drydock.lease.search" with various constraints.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13383
Differential Revision: https://secure.phabricator.com/D20723
Summary:
Fixes T13378. If we join Ferret tables and page, we can end up with an ambiguous `id` column here.
Explicitly refer to "project.x" in all cases that we're interacting with the project table.
Test Plan:
- Changed page size to 3.
- Issued a Projects query for "~e", matching more than 3 results.
- Clicked "Next Page".
- Before: ambiguous id column fatal.
- After: next page.
Maniphest Tasks: T13378
Differential Revision: https://secure.phabricator.com/D20714
Summary:
Ref T13369. See that task for discussion.
When the discovery daemon finds more than 64 commits to import, demote the worker queue priority of the resulting tasks.
Test Plan:
- Pushed one commit, ran `bin/repository discover --verbose --trace ...`, saw commit import with "at normal priority" message and priority 2500 ("PRIORITY_COMMIT").
- Pushed 3 commits, set threshold to 3, ran `bin/repository discover ...`, saw commist import with "at lower priority" message and priority 4000 ("PRIORITY_IMPORT").
Maniphest Tasks: T13369
Differential Revision: https://secure.phabricator.com/D20712
Summary:
Ref T13373. When you "bin/config set x ..." a value, the success message ("Set x ...") is somewhat ambiguous and can be interpreted as "First, you need to set x..." rather than "Success, wrote x...".
Make the messaging more explicit. Also make this string more translatable.
Test Plan: Ran `bin/config set ...` with various combinations of flags, saw more clear messaging.
Maniphest Tasks: T13373
Differential Revision: https://secure.phabricator.com/D20711
Summary: Fixes T13374. The "Temporary Failures" row is missing a cell definiton from the addition of "Average Queue Time".
Test Plan: Viewed "/daemon/" with some temporary failures and and odd number of rows above the "Temporary Failures" row. Saw cell properly zebra-striped.
Maniphest Tasks: T13374
Differential Revision: https://secure.phabricator.com/D20710
Summary:
Ref T13349. This is almost the same change as D20678, but for project profiles instead of user profiles.
The general reproduction case is "view a project where you can't see more than 50 of the 500 most recent feed stories".
Test Plan:
- Forced all queries to overheat.
- Viewed a project profile page.
- Before: overheating fatal near top level.
- After: damage contained to feed panel.
Maniphest Tasks: T13349
Differential Revision: https://secure.phabricator.com/D20704
Summary: See downstream <https://phabricator.wikimedia.org/T229757>. The "autofocus" attribute mostly just works, so add it to this input.
Test Plan: As a user with TOTP enabled, established a new session. Saw browser automatically focus the "App Code" input on the TOTP prompt screen.
Differential Revision: https://secure.phabricator.com/D20703
Summary:
Fixes T13370. We currently show an "Award Badge" button conditionally, based on whether the viewer can award any badges or not.
The query to test this may overheat and this pattern isn't consistent with other UI anyway. Stop doing this test.
Test Plan:
- Created 12 badges.
- As a user who could not edit any of the badges, viewed the "Badges" section of a user profile.
Maniphest Tasks: T13370
Differential Revision: https://secure.phabricator.com/D20702
Summary: Fixes T13368. Some workflows (like "Move tasks to...") execute board layout without objects to update. In these cases, we can hit a warning because `objectPHIDs` is not initialized to `array()`.
Test Plan: Went through the "Move tasks to..." workflow on a workboard, no longer saw a warning when trying to iterate over an empty `objectPHIDs` list.
Maniphest Tasks: T13368
Differential Revision: https://secure.phabricator.com/D20701
Summary:
Ref T13368. Currently, both visible and hidden columns are shown in the "Move tasks to..." dropdown on workflows from workboards.
When the dropdown contains hidden columns, move them to a separate section to make it clear that they're not likely targets.
Test Plan:
- Used "Move tasks to project..." targeting a board with no hidden columns. Saw a single ungrouped dropdown.
- Used "Move tasks to project..." targeting a board with hidden columns. Saw a dropdown grouped into "Visible" and "Hidden" columns.
Maniphest Tasks: T13368
Differential Revision: https://secure.phabricator.com/D20700
Summary:
Ref T13368. Proxy columns should not be selectable from this workflow. If you want to move tasks to milestone/subproject X, do "Move tasks to project..." and pick X as the project.
(This could be made to work some day.)
Test Plan: Went through a "Move tasks to project..." workflow targeting a project with subprojects. No longer saw subproject columns presented as dropdown options.
Maniphest Tasks: T13368
Differential Revision: https://secure.phabricator.com/D20699
Summary: Ref T13368. The column options presented to the user are currently incorrect because the wrong set of columns are drawn from.
Test Plan: On a workboard, used "Move tasks to project..." to target another board, saw that board's columns.
Maniphest Tasks: T13368
Differential Revision: https://secure.phabricator.com/D20698
Summary:
Fixes T13341. Currently, cart emails (invoices/receipts) are sent to members of the associated merchant account. This was just a simple way to keep an eye on things when this was first written.
The system works fine, and recent changes (almost certainly D20525) stopped these emails from working (presumably because of the slightly weird merchant permissions model).
This could be sorted out in more detail, but it looks like the path forward is to introduce a side channel for email anyway (via T8389), and that's a better way to implement this behavior since it means the normal recipients won't see a bunch of random staff/merchant email addresses on their receipts.
Test Plan: Grepped for `merchant` in this editor.
Maniphest Tasks: T13341
Differential Revision: https://secure.phabricator.com/D20696
Summary:
Ref T13339. If a search pattern matches more than once on a line, we currently render the line incorreclty, duplicating some of the text.
`substr()` is being called as though the third parameter was `end_offset`, but it's actually `length`. Correct the parameter.
Test Plan:
Before:
{F6676625}
After:
{F6676623}
Maniphest Tasks: T13339
Differential Revision: https://secure.phabricator.com/D20695
Summary:
Fixes T8830. Fixes T13364.
- The inability to destroy objects from the web UI is intentional. Make this clear in the messaging, which is somewhat out of date and partly reflects an earlier era when things could be destroyed.
- `bin/remove destroy` can't rewind time. Document expectations around the "put the cat back in the bag" use case.
Test Plan: Read documentation, clicked through both workflows.
Maniphest Tasks: T13364, T8830
Differential Revision: https://secure.phabricator.com/D20694
Summary: Ref T13358. This is very minimal, but technically works. The eventual goal is to generate PDF invoices to make my life easier when I have to interact with Enterprise Vendor Procurement.
Test Plan: {F6672439}
Maniphest Tasks: T13358
Differential Revision: https://secure.phabricator.com/D20692
Summary:
Fixes T13356. This option is supported and works fine, it just isn't documented.
Add documentation and fix the config option to actually link to it to make life a little easier.
Test Plan: Read documentation.
Maniphest Tasks: T13356
Differential Revision: https://secure.phabricator.com/D20691
Summary: Fixes T13355. This didn't appear to be a ton of extra work, we just didn't get it for free in the original implementation in D14635.
Test Plan:
- Saw "date" custom fields appear in Conduit API documentation for "maniphest.edit".
- Set custom "date" field to null and non-null values via the API.
{F6666582}
Maniphest Tasks: T13355
Differential Revision: https://secure.phabricator.com/D20690
Summary: Ref T4900. We may execute a bad query here if the task has no projects at all.
Test Plan: Edited a task with no new or old projects. Instead of an exception, things worked.
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D20689
Summary:
Fixes T13353. If you:
- Visit a blog post and save the URI.
- Move the blog post to a different blog.
- Revisit the old URI.
...we currently 404. We know what you're trying to do and should just redirect you to the new URI instead. We already do this if you visit a URI with a noncanonical slug.
Test Plan:
- Created post A.
- Copied the live URI.
- Moved it to a different blog.
- Visited the saved URI from the earlier step.
- Before: 404.
- After: Redirect to the canonical URI.
Maniphest Tasks: T13353
Differential Revision: https://secure.phabricator.com/D20688
Summary: Depends on D20686. Fixes T13350. Now that "slowvote.poll.search" exists, deprecate this old method.
Test Plan: Reviewed method description in Condiut API console in the web UI.
Maniphest Tasks: T13350
Differential Revision: https://secure.phabricator.com/D20687
Summary:
Depends on D20685. Ref T13350. Currently:
- When a SearchEngine parameter is marked as hidden from Conduit, we may still render a table of possible values. Instead, only render the table if the parameter is actually usable.
- The table header is hard-coded to say `'statuses'`, which is just a silly mistake. (Most commonly, this table does have `statuses` constants.)
Test Plan: Viewed the Conduit API documentation for the new "slowvote.poll.search" API method, saw more sensible display behavior.
Maniphest Tasks: T13350
Differential Revision: https://secure.phabricator.com/D20686
Summary: Ref T13350. Add a modern "*.search" API method for Slowvote so "slowvote.info" can be deprecated with a reasonable replacement.
Test Plan: Used Conduit test console to call method, saw reasonable results.
Maniphest Tasks: T13350
Differential Revision: https://secure.phabricator.com/D20685
Summary:
Depends on D20680. Ref T4900. The "BoardLayoutEngine" operates on PHIDs without knowledge of the underlying objects, but this means it has to be sensitive to PHID input order when falling back to a default layout order.
We use "default layout order" on workboards which are sorted by "Natual" order but which have one or more cards which no user has ever reordered. For example, if you add 10 tasks to a project, then create a board, there's no existing order for those tasks in the "Backlog" column. The layout engine uses the input order to place them in the column, with the expectation that input order is ID/creation order, so new cards will end up on top.
I think this code never really made an explicit effort to guarantee that the LayoutEngine received objects in ID order, and it just sort of happened to by coincidence and good fortune. Some recent change has disrupted this, so the edit operation can end up with the PHIDs arranged in arbitrary order.
Explicitly put them in ID order so we always get an implicit default layout order to fall back to. Also, update to `msortv()`.
Test Plan:
- Tagged several tasks with project X, a project without a board yet.
- Created the project X workboard.
- (Did not drag any tasks around on the project X board!)
- Viewed the board in "Natural" order.
This creates a view of the board where tasks are ordered by implicit/virtual/input order. The expectation, and "view" behavior of this board, is that this order is "newest on top".
- Edited one of the cards on the board, changing the title (don't reorder it!)
- Before: page state synchronized with cards in arbitrary/random/different order.
- After: page state synchronized with cards in the same order as before ("newest on top").
Reviewers: amckinley
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D20681
Summary:
Ref T4900. When a card is edited, we currently emit an update notification for all the projects the task is tagged with. This isn't quite the right set:
- We want to emit notifications for projects the task //was previously// tagged with, so it can be removed from boards it should no longer be part of.
- We want to emit notifications for ancestors of projects the task is or was tagged with, so parent project boards can be updated.
- However, we don't need to emit notifications for projects that don't actually have workboards.
Adjust the notification set to align better to these rules.
Test Plan:
- Removal of Parent Project: Edited a task on board "A > B", removing the "B" project tag. Saw board A update in another window.
- Normal Update: Edited a task title on board X, saw board X update in another window.
- Used `bin/aphlict debug` to inspect the notification set, saw generally sensible-seeming data going over the wire.
Reviewers: amckinley
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D20680
Summary: Ref T13350. This ancient API method is missing modern policy checks.
Test Plan:
- Set visibility of vote X to "Only: epriestley".
- Called "slowvote.info" as another user.
- Before: retrieved poll title and author.
- After: policy error.
- Called "slowvote.info" on a visible poll, got information before and after.
Maniphest Tasks: T13350
Differential Revision: https://secure.phabricator.com/D20684
Summary:
Fixes T13348. Currently, the Harbormaster UI shows "Restart All Builds", but it really means "Restart Restartable Builds", which is often fewer than "All" builds (because of autobuilds, permissions, and/or configuration).
Remove the misleading term "All" and make the workflow preview exactly which builds will and will not be affected, and why.
Test Plan:
{F6636313}
{F6636314}
{F6636315}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13348
Differential Revision: https://secure.phabricator.com/D20679
Summary:
Depends on D20673. Ref T13343. Since we're now putting log IDs in email, make the UI a little better for working with log IDs.
Some day, this page might have actions like "report this as suspicious" or whatever, but I'm not planning to do any of that for now.
Test Plan: {F6608631}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13343
Differential Revision: https://secure.phabricator.com/D20674
Summary:
Depends on D20672. Ref T13343. When a user requests an account access link via email:
- log it in the activity log; and
- reference the log in the mail.
This makes it easier to ban users misusing the feature, provided they're coming from a single remote address, and takes a few steps down the pathway toward a button in the mail that users can click to report the action, suspend account recovery for their account, etc.
Test Plan:
- Requested an email recovery link.
- Saw request appear in the user activity log.
- Saw a reference to the log entry in the mail footer.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13343
Differential Revision: https://secure.phabricator.com/D20673
Summary: Depends on D20671. Ref T13343. Now that log types are modular, provide a datasource/tokenizer for selecting them since we already have a lot (even after I purged a few in D20670) and I'm planning to add at least one more ("Request password reset").
Test Plan: {F6608534}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13343
Differential Revision: https://secure.phabricator.com/D20672
Summary:
Depends on D20670. Ref T13343. The user activity message log types are currently hard-coded, so only upstream code can really use the log construct.
Under the theory that we're going to keep this log around going forward (just focus it a little bit), modularize things so the log is extensible.
Test Plan:
Grepped for `UserLog::`, viewed activity logs in People and Settings.
(If I missed something here -- say, misspelled a constant -- the effect should just be that older logs don't get a human-readable label, so stakes are very low.)
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13343
Differential Revision: https://secure.phabricator.com/D20671
Summary: Fixes T13349. If the user profile page feed query overheats, it currently takes the whole page with it. Contain the blast to a smaller radius.
Test Plan: {F6633322}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13349
Differential Revision: https://secure.phabricator.com/D20678
Summary: Humble user cannot silence/mute project if he/she has no CAN_EDIT permissions in it. You can actually leave it but if project is locked - then you're scr*wed.
Test Plan:
1. On a testing phabricator instance created a dummy project
2. Changed that project permissions CAN_EDIT to be by admin only
3. Added poor soul with no CAN_EDIT permissions
4. Logged it in with poor soul
5. Tried to silence the project
6. The Project is successfully silenced
7. User is happy :)
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, Pawka
Differential Revision: https://secure.phabricator.com/D20675
Summary:
Depends on D20669. Ref T13343. Currently, the user activity log includes a number of explicit administrative actions which some administrator (not a normal user or a suspicious remote address) takes. In most/all cases, these changes are present in the user profile transaction log too, and that's //generally// a better place for them (for example, it doesn't get GC'd after a couple months).
Some of these are so old that they have no writers (like DELETE and EDIT). I'd generally like to modernize this a bit so we can reference it in email (see T13343) and I'd like to modularize the event types as part of that -- partly, cleaning this up makes that modularization easier.
There's maybe some hand-wavey argument that administrative vs non-administrative events could be related and might be useful to see in a single log, but I can't recall a time when that was actually true, and we could always build that kind of view later by just merging the two log sources, or by restoring double-writes for some subset of events. In practice, I've used this log mostly to look for obvious red flags when users report authentication difficulty (e.g., many unauthorized login attempts), and removing administrative actions from the log is only helpful in that use case.
Test Plan: Grepped for all the affected constants, no more hits in the codebase.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13343
Differential Revision: https://secure.phabricator.com/D20670
Summary: Depends on D20668. Ref T13343. Just an easy cleanup/simplification while I'm here.
Test Plan: `grep` for `getActionConstant()`
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13343
Differential Revision: https://secure.phabricator.com/D20669
Summary:
Depends on D20667. Ref T13343. Password auth currently uses an older rate limiting mechanism, upgrade it to the modern "SystemAction" mechanism.
This mostly just improves consistency, although there are some tangential/theoretical benefits:
- it's not obvious that making the user log GC very quickly could disable rate limiting;
- if we let you configure action limits in the future, which we might, this would become configurable for free.
Test Plan:
- With CAPTCHAs off, made a bunch of invalid login attempts. Got rate limited.
- With CAPTCHAs on, made a bunch of invalid login attempts. Got downgraded to CAPTCHAs after a few.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13343
Differential Revision: https://secure.phabricator.com/D20668
Summary:
Depends on D20666. Ref T13343. In D20666, I limited the rate at which a given user account can be sent account recovery links.
Here, add a companion limit to the rate at which a given remote address may request recovery of any account. This limit is a little more forgiving since reasonable users may plausibly try multiple variations of several email addresses, make typos, etc. The goal is just to hinder attackers from fishing for every address under the sun on installs with no CAPTCHA configured and no broad-spectrum VPN-style access controls.
Test Plan: {F6607846}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13343
Differential Revision: https://secure.phabricator.com/D20667
Summary:
Depends on D20665. Ref T13343. We support CAPTCHAs on the "Forgot password?" flow, but not everyone configures them (or necessarily should, since ReCAPTCHA is a huge external dependency run by Google that requires you allow Google to execute JS on your domain) and the rate at which any reasonable user needs to take this action is very low.
Put a limit on the rate at which account recovery links may be generated for a particular account, so the worst case is a trickle of annoyance rather than a flood of nonsense.
Test Plan: {F6607794}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13343
Differential Revision: https://secure.phabricator.com/D20666
Summary:
Depends on D20664. Ref T13343. There's a reasonable value for the default "Email Login" auth message (generic "you reset your password" text) that installs may reasonably want to replace. Add support for a default value.
Also, since it isn't completely obvious where this message shows up, add support for an extended description and explain what's going on in more detail.
Test Plan:
- Viewed message detail page, saw more detailed information.
- Sent mail (got default), overrode message and sent mail (got custom message), deleted message (got default again).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13343
Differential Revision: https://secure.phabricator.com/D20665
Summary:
Depends on D20663. Ref T13343. Currently, if an Auth message hasn't been customized yet, clicking the message type takes you straight to an edit screen to create a message.
If an auth message has already been customized, you go to a detail screen instead.
Since there's no detail screen on the "create for the first time" flow, we don't have anywhere to put a more detailed description or a preview of a default value.
Add a view screen that works if a message is "empty" so we can add this stuff.
(The only reason we don't already have this is that it took a little work to build; this also generally improves the consistency and predictability of this interface.)
Test Plan: {F6607665}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13343
Differential Revision: https://secure.phabricator.com/D20664
Summary:
Depends on D20662. Ref T13343. Installs may reasonably want to change the guidance users receive in "Email Login"/"Forgot Password" email.
(In an upcoming change I plan to supply a piece of default guidance, but Auth Messages need a few tweaks for this.)
There's probably little reason to provide guidance on the "Set Password" flow, but any guidance one might issue on the "Email Login" flow probably doesn't make sense on the "Set Password" flow, so I've included it mostly to make it clear that this is a different flow from a user perspective.
Test Plan:
- Set custom "Email Login" and "Set Password" messages.
- Generated "Email Login" mail by using the "Login via email" link on the login screen.
- Generated "Set Password" email by trying to set a password on an account with no password yet.
- Saw my custom messages in the resulting mail bodies.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13343
Differential Revision: https://secure.phabricator.com/D20663
Summary:
Ref T13343. This makes "Password Reset" email a little more consistent with other modern types of email. My expectation is that this patch has no functional changes, just organizes code a little more consistently.
The new `setRecipientAddress()` mechanism deals with the case where the user types a secondary (but still verified) address.
Test Plan:
- Sent a normal "login with email" email.
- Sent a "login with email to set password" email by trying to set a password on an account with no password yet.
- Tried to email reset a bot account (no dice: they can't do web logins so this operation isn't valid).
- Tested existing "PeopleMailEngine" subclasses:
- Created a new user and sent a "welcome" email.
- Renamed a user and sent a "username changed" email.
- Reviewed all generated mail with `bin/mail list-outbound`.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13343
Differential Revision: https://secure.phabricator.com/D20662
Summary:
See D20650. Long ago, this got added as "pastebin", but that's the name of another product/company, not a generic term for paste storage.
Rename the database to `phabricator_paste`.
(An alternate version of this patch would rename `phabricator_search` to `phabricator_bing`, `phabricator_countdown` to `phabricator_spacex`, `phabricator_pholio` to `phabricator_adobe_photoshop`, etc.)
Test Plan:
- Grepped for `pastebin`, now only found references in old patches.
- Applied patches.
- Browsed around Paste in the UI without encountering issues.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D20661
Summary:
Depends on D20654. Ref T4900. When a task is edited, emit a "workboards" event for all boards it appears on (in a future change, this should also include all boards it //previously// appeared on, and all parents of both sets of boards -- but I'm just getting things working for now).
When we receive a "workboards" event, check if the visible board should be updated.
Aphlict has a complicated intra-window leader/follower election system which could let us process this update event exactly once no matter how many windows a user has open with the same workboard. I'm not trying to do any of this since it seems fairly rare. It makes sense for events like "you have new notifications" where we don't want to generate 100 Ajax calls if the user has 100 windows open, but very few users seem likely to have 100 copies of the same workboard open.
Test Plan:
- Ran `bin/aphlict debug`.
- Opened workboard A in two windows, X and Y.
- Edited and moved tasks in window X.
- Saw "workboards" messages in the Aphlict log.
- Saw window Y update in nearly-real-time (locally, this is fast enough that it feels instantaneous).
Then:
- Stopped the Aphlcit server.
- Edited a task.
- Started the Aphlict server.
- Saw window Y update after a few moments (i.e., update in response to a reconnect).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D20656
Summary:
Fixes T13342. This does a few different things, although all of them seem small enough that I didn't bother splitting it up:
- Support export of "remarkup" custom fields as text. There's some argument here to export them in some kind of structure if the target is JSON, but it's hard for me to really imagine we'll live in a world some day where we really regret just exporting them as text.
- Support export of "date" custom fields as dates. This is easy except that I added `null` support.
- If you built PHP from source without "--enable-zip", as I did, you can hit the TODO in Excel exports about "ZipArchive". Since I had a reproduction case, test for "ZipArchive" and give the user a better error if it's missing.
- Add a setup check for the "zip" extension to try to avoid getting there in the first place. This is normally part of PHP so I believe users generally won't hit it, I just hit it because I built from source. See also T13232.
Test Plan:
- Added a custom "date" field. On tasks A and B, set it to null and some non-null value. Exported both tasks to Excel/JSON/text, saw null and a date, respectively.
- Added a custom "remarkup" field, exported some values, saw the values in Excel.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13342
Differential Revision: https://secure.phabricator.com/D20658
Summary:
Depends on D20653. Ref T4900. Pass ordering details to the reload endpoint so it can give the client accurate ordering/header information in the response.
The removed comment mentions this, but here's why this is a difficult mess:
- In window A, view a board with "Group by: Owner" and no tasks owned by "Alice". Since "Alice" owns no tasks, this means the columns do not have an "Assigned to: Alice" header!
- In window B, edit task T and assign it to Alice.
- In window A, press "R".
Window A now not only needs to update to properly reflect the state of task T, it actually needs to draw a new "Assigned to: Alice" header in every column.
Fortunately, the "group by" code anticipates this being a big mess, is fairly careful about handling it, and the client can handle this state change and the actual code change here isn't too involved. This is just causing a lot of not-very-obvious indirect effects in the pipeline to handle these situations that need complex redraws.
Test Plan:
- After making various normal edits/creates/moves in window A, pressed "R" in window B. Saw ordering reflected correctly after sync.
- Went through the whole "Group by: Owner" + assign to unrepresented owner flow above. After pressing "R", saw "Assigned to: Alice" appear on the board.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D20654
Summary:
Depends on D20652. Ref T4900. When the user presses "R", send a list of cards currently visible on the client and their version numbers.
On the server:
- Compare the client verisons to the server versions so we can skip updates for objects which have not changed. (For now, the client version is always "1" and the server version is always "2", so this doesn't do anything meaningful, and every card is always updated.)
- Compare the client visible set to the server visible set and "remove" any cards which have been removed from the board.
I believe this means that "R" always puts the board into the right state (except for some issues with client orderings not being fully handled yet). It's not tremendously efficient, but we can make versioning better (using the largest object transaction ID) to improve that and loading the page in the first place doesn't take all that long so even sending down the full visible set shouldn't be a huge problem.
Test Plan:
- In window A, removed a card from a board.
- In window B, pressed "R" and saw the removal reflected on the client.
- (Also added cards, edited cards, etc., and didn't catch anything exploding.)
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D20653
Summary:
Depends on D20639. Ref T4900. Currently, "BoardResponseEngine" has a `setObjectPHID()` method. This is called after edit operations to mean "we just edited object X, so we know it needs to be updated".
Move toward `setUpdatePHIDs(...)` in all cases, with `setUpdatePHIDs(array(the-object-we-just-edited))` as a special case of that. After this change, callers pass:
- An optional list of PHIDs they know need to be updated on the client. Today, this is always be a card we just edited (on edit/move flows), or a sort of made-up list of PHIDs for the moment (when you press "R"). In the future, the "R" endpoint will do a better job of figuring out a more realistic update set.
- An optional list of PHIDs currently visible on the client. This is used to update ordering details and mark cards for removal. This is currently passed by edit/move, but not by pressing "R" (it will be in the future).
- An optional list of objects. The "R" workflow has to load these anyway, so we can save a couple queries by letting callers pass them. For now, the edit/move flows still rely on the engine to figure out what it needs to load.
This does very little to actually change client behavior, it mostly just paves the way for the next update to the "R" workflow to make it handle add/remove cases properly.
Test Plan:
- Edited and moved cards on a workboard.
- Pressed "R" to reload a workboard.
Neither of these operations seem any worse off than they were before. They still don't fully work:
- When you edit a card and delete the current workboard project from it, it remains visible. This is also the behavior on `master`. This is sort of intentional since we don't necessarily want to make these cards suddenly disappear? Ideally, we would probably have some kind of "tombstone" state where the card can still be edited but can't be dragged, and the next explicit user interaction would clean up old tombstones. This interaction is very rare and I don't think it's particularly important to specialize.
- When a card is removed from the board, "R" can't currently figure out that it should be removed from the client. This is because the client does not yet pass a "visiblePHIDs" state. It will in an upcoming change.
- The "R" flow always sends a full set of card updates, and can not yet detect that some cards have not changed.
- There's a TODO, but some ordering stuff isn't handled yet.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D20652
Summary:
Depends on D20638. Ref T4900. This is an incremental step toward proper workboard updates.
Currently, the client can mostly update its view because we do updates when you edit or move a card, and the client and server know how to send lists of card updates, so a lot of the work is already done.
However, the code assumes we're only updating/redrawing one card at a time. Make the client accept and process multiple card updates.
In future changes, I'll add versioning (so we only update cards that have actually changed), fix the "TODO" around ordering, and move toward actual Aphlict-based real-time updates.
Test Plan:
- Opened the same workboard in two windows.
- Edited cards in one window, pressed "R" (capital letter, with no modifier keys) to reload the second window.
- Saw edits and moves reflected accurately after sync, except for some special cases of header/order interaction (see "TODO").
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D20639
Summary: I was poking around in `PhabricatorAuthProviderViewController` and noticed that none of the subclass-specific rendering was working. Figured out that no one ever calls `PhabricatorAuthProviderConfigTransaction->setProvider()`, so instead of adding all those calls, just pull the provider out of the config object.
Test Plan:
Before: {F6598145}
After: {F6598147}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D20655
Summary: Ref T2784. These are lookin' pretty stable. Subclasses like `DiffusionGetLintMessagesConduitAPIMethod` have their warnings about unstable methods, so just remove this warning in the base class.
Test Plan: Loaded `/conduit`, observed lack of unstable warnings. Only unstable methods are now `diffusion.getlintmessages`, `diffusion.looksoon`, and `diffusion.updatecoverage`.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T2784
Differential Revision: https://secure.phabricator.com/D20651
Summary: Forgot to post this after D20394. Fixes T7667.
Test Plan:
* Edited some providers with the config locked and unlocked.
* Opened the edit form with the config unlocked, locked the config, then saved, and got a sensible error: {F6576023}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T7667
Differential Revision: https://secure.phabricator.com/D20645
Summary: See <https://discourse.phabricator-community.org/t/phd-status-calls-to-undefined-method-when-theres-no-instance/2918>. This call should be `logInfo()`.
Test Plan:
- Purged `PHABRICATOR_INSTANCE` from my environment. In a Phacility development environment, it comes from loading `services/`.
- Ran `bin/phd stop` with all daemons already stopped.
- Before: bad call.
- After: helpful error.
- Ran some other `bin/phd start`, `bin/phd status`, etc., to kick the tires.
- Grepped for remaining `writeInfo()` calls (found none).
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20649
Summary: See rPaacc62463d61. D20551 added some `CAN_INTERACT` checks, but `CAN_INTERACT` needs to be checked with `canInteract()` to fall back to `CAN_VIEW` properly. D20558 cleaned up most of this but missed one callsite; fix that up too.
Test Plan: Removed a comment on a commit.
Reviewers: amckinley, 20after4
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20648
Summary: Ref T13332. This fix isn't terribly satisfying, but resolves the issue: this behavior may attempt to build HTML blocks with metadata after Javascript footer rendering has started. Use `hsprintf()` to flatten the markup earlier.
Test Plan: Put a `T123` reference in the description of a Pholio image, then loaded a mock.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13332
Differential Revision: https://secure.phabricator.com/D20647
Summary:
Ref D20645. Start making this view a little more useful:
{F6573605}
Test Plan: Mk. 1 eyeball
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D20646