Summary:
See PHI1722, which requests transaction details about reviewer changes.
This adds them; they're structured to be similar to "projects" and "subscribers" transactions and the "reviewers" attachment on revisions.
Test Plan: {F7410675}
Differential Revision: https://secure.phabricator.com/D21207
Summary: This supports the IntelliJ IDEA editor.
Test Plan:
- Looked at the editor settings panel, saw "idea://".
- Set my editor pattern to "idea://a?b".
- (Did not actually install IntelliJ IDEA.)
Differential Revision: https://secure.phabricator.com/D21206
Summary: Ref T13528. Now that we're hinting users into Files, put the content first and move the detail panel under it. Move the most-useful details (author, size, dimensions) into the curtain.
Test Plan: {F7409925}
Maniphest Tasks: T13528
Differential Revision: https://secure.phabricator.com/D21201
Summary:
Ref T13528. The original rationale here was that it's easier to find items at the bottom of the curtain than somewhere in the middle, since they're in a more clearly predictable visual location.
This might be true in some sense, but user feedback about this has fairly consistently indicated that the layout is surprising. Try the other order. See also D20967 for some discussion.
In practice, this primarily moves "Author / Assigned" above other panel elements in Maniphest.
Test Plan: Looked at tasks, aw "Author / Assigned" above "Tags / Subscribers".
Maniphest Tasks: T13528
Differential Revision: https://secure.phabricator.com/D21200
Summary:
Ref T13528. Paste data is stored in files, but the files are always named "raw.txt".
Now that Paste provides a hint to use Files for "DocumentEngine" rendering, try to use the same name as the paste instead.
Test Plan:
- Created a paste named "staggering-insight.ipynb".
- Clicked "View as Jupyter Notebook" from Paste.
- Saw a file named "staggering-insight.ipynb", not "raw.txt".
- Created a paste with no name, saw a file named "raw-paste-data.txt" get created.
Maniphest Tasks: T13528
Differential Revision: https://secure.phabricator.com/D21197
Summary: Ref T13528. When a file in Paste (like a Jupyter notebook) has a good/useful document engine, provide a link to Files.
Test Plan: {F7409881}
Maniphest Tasks: T13528
Differential Revision: https://secure.phabricator.com/D21196
Summary:
See PHI1719. User agents making hard-coded requests to "/favicon.ico" currently 404. This is a mild source of log noise, and we can reasonably route this request.
Limitations:
- This only routes the "PlatformSite". Other sites (custom Phame blogs, third-party sites, Phurl redirectors) won't route here for now.
- This returns a "Location:" redirect to the correct resource rather than icon data directly. This produces the right icon with the right caching behavior, and returning icon data directly is difficult in the general case. However, it won't perform/cache as well as a direct response would.
Test Plan:
- Visted `/favicon.ico`.
- Before: 404.
- After: redirect to favicon.
Differential Revision: https://secure.phabricator.com/D21195
Summary:
Ref T13526. Currently, if a build plan is restricted, viewers may fatal when trying to view related builds.
The old behavior allowed them to see the build even if they can not see the build plan. This is sort of incoherent, but try to stabilize things before fixing this.
Test Plan:
This is a muddy change.
- Created a build with a build plan that Alice can't see.
- As Alice, viewed the build page (restricted before, restricted after); the buildable page (fatal before, works after).
- Also viewed a revision page (works before and after, but user-reported fatal).
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13526
Differential Revision: https://secure.phabricator.com/D21194
Summary:
See PHI1714. This code is incorrectly rendering the chart panel twice, sort of, and passing a non-View object to rendering.
After D21044, this fatals by raising an exception in rendering.
Test Plan: Loaded page, no more exception.
Differential Revision: https://secure.phabricator.com/D21185
Summary:
Ref T13520. Generally, make the table of contents look and more like the paths panel:
- Show a hierarchy, with compression for single-sibling children.
- Use the same icons, instead of "M D" and "(img)" stuff.
- Use EditDistanceMatrix to do a piece-by-piece diff of paths changes.
- Show path changes within the path list.
I'm not entirely sold on this, but it was complicated to write and I've never heard the term "sunk cost fallacy". I think this is mostly a net improvement, but may need some adjustments and followup.
Test Plan: Viewed various changes in Differential and Diffusion, saw a more usable table of contents.
Maniphest Tasks: T13520
Differential Revision: https://secure.phabricator.com/D21183
Summary:
See <https://discourse.phabricator-community.org/t/runtimeexception-during-import-of-commit/3801>. When importing commits with "Auditors:", a raw transaction new value (with an edge edit map using a "+" key) may be passed as an unmentionable PHID list.
Instead, pass an actual PHID list.
Test Plan:
- Pushed a commit with "Auditors: duck".
- Ran daemons.
- Before patch: umentionable PHID exception.
- After patch: clean commit import.
- Verified "duck" was added as an auditor.
Differential Revision: https://secure.phabricator.com/D21181
Summary:
Ref T13523. Currently, when building a "comparison" changeset, metadata is taken from the left changeset. This is somewhat arbitrary.
This means that intradiffs of images don't work properly because the rendered changeset has only the left (usually "old") information.
Later, some of the code attempts to ignore the file data stored on the changeset and reconstruct the correct file data, which is how the result ends up not-completely-wrong.
Be more careful about building sensible-ish metadata, and then just use it directly later on. This fixes the "spooky" code referencing D955 + D6851.
There are some related issues, where "change type" and "file type" are selected arbitrarily and then used to determine whether the change has an "old/new" state or not (i.e., is the left side of the diff empty, since the change creates the file)?
In many cases, neither of the original changesets have a "change type" which will answer this question correctly. Separate this concept from "has state" from "change type", and make more of the code ask narrower questions about the specific conditions or states it cares about, rather than "change type".
Test Plan:
- Created a revision with Diff 1, Diff 2, and Diff 3. Diff 1 takes an image from "null -> A". Diff 2 takes the same image from "null -> B". Diff 3 takes the same image from "A -> B'.
- Intradiffed 1v2 and 1v3.
- Before patch:
- Left side usually missing, which is incorrect (should always be "A").
- Change properties are a mess ("null -> image/png" for MIME type, e.g.)
- Uninteresting/incorrect "unix:filemode" stuff.
- After patch;
- Left side shows state "A".
- Change properties only show size changes (which is correct).
{F7402012}
Maniphest Tasks: T13523
Differential Revision: https://secure.phabricator.com/D21180
Summary:
Fixes T13525. Since D21044, the intermittent GC list warnings are treated more severely and can become user-visible errors.
Silence them, since this seems to be the only realistic response in most versions of APC/APCu.
Test Plan: Will deploy.
Maniphest Tasks: T13525
Differential Revision: https://secure.phabricator.com/D21179
Summary:
Ref T13524. If a Harbormaster lint message has no line number (which is permitted), we try to access an invalid index here. This is an exception after D21044.
Treat comments with no line number as unchanged. These comments do not have "ghost" behavior and do not port across diffs.
Test Plan:
- Used "harbormaster.sendmessage" to submit lint with no line number on a changeset.
- Viewed changeset.
- Before patch: "Undefined index: <null>" error.
- After patch: Clean changeset with lint message.
{F7400072}
Maniphest Tasks: T13524
Differential Revision: https://secure.phabricator.com/D21178
Summary:
See PHI1710. Python encodes `True` as `True` (with an uppercase "T") when building URLs.
We currently do not accept this as a "truthy" value, but it's reasonable and unambiguous. Accept "True", "TRUE", "tRuE", etc.
Test Plan: Made a cURL conduit call with "True" and "tRuE". Before patch: failure to decoded booleans; after patch: successful interpretation of "true" variations.
Differential Revision: https://secure.phabricator.com/D21177
Summary: See PHI1710. Until D21044, some transactions could omit "value" and apply correctly. This now throws an exception when accessing `$xaction['value']`. All transactions are expected to have a "value" key, so require it explicitly rather than implicitly.
Test Plan: Submitted a transaction with a "type" but no "value". After D21044, got a language-level exception. After this change, got an explicit exception.
Differential Revision: https://secure.phabricator.com/D21176
Summary: Ref T13522. When changesets update an image, we currently compute no effect hash. A content hash of the image (or other binary file) is a reasonable effect hash, and enalbes effect-hash-based behavior, including hiding files in intradiffs.
Test Plan:
- Created a revision affecting `cat.png` and `quack.txt` (currently, there must be 2+ changesets to trigger the hide logic).
- Updated it with the exact same changes.
- Viewed revision:
- Saw the image renderered in the interdiff.
- Applied patch.
- Ran `bin/differential rebuild-changesets ...`.
- Viewed revision:
- Saw both changesets collapse as unchanged.
Maniphest Tasks: T13522
Differential Revision: https://secure.phabricator.com/D21174
Summary: Ref T13518. See <https://discourse.phabricator-community.org/t/more-exceptions-when-viewing-diffs/3789/>. Under PHP 7.4, accessing an array index of values like `false` and `null` is no longer valid. This is great, but we occasionally do it.
Test Plan:
- Upgraded to PHP 7.4.
- Loaded revisions with added/changed lines, inlines, and Asana support configured.
- Before patch: saw various fatals around accessing indexes of booleans and nulls.
- After patch: clean revision.
Maniphest Tasks: T13518
Differential Revision: https://secure.phabricator.com/D21172
Summary:
Ref T13493. At time of writing, the old API method no longer functions: `1/session` does not return an `accountId` but all calls now require one.
Use the modern `3/myself` API instead. The datastructure returned by `2/user` (older appraoch) and `3/myself` (newer approach) is more or less the same, as far as I can tell.
Test Plan: Linked an account against modern-at-time-of-writing Atlassian-hosted JIRA.
Maniphest Tasks: T13493
Differential Revision: https://secure.phabricator.com/D21170
Summary:
Ref T13517. See that task for details about the underlying issue here.
Currently, we may decode a compressed response, then retransmit it with leftover "Content-Encoding" and "Content-Length" headers. Instead, strip these headers.
Test Plan:
- In a clustered repository setup, cloned a Git repository over HTTP.
- Before: Error while processing content unencoding: invalid stored block lengths
- After: Clean clone.
Maniphest Tasks: T13517
Differential Revision: https://secure.phabricator.com/D21167
Summary:
Ref T4369. During T13507, I set my "max_post_size" to a very small value, like 7 (i.e., 7 bytes). This essentially disables "enable_post_data_reading" even if the setting is technically on.
This breaks forms which use "multipart/form-data", which are rare but not nonexistent. Notably, forms in Config use this setting (because of `ui.header` stuff?) although perhaps they should not or no longer need to.
This can be fixed by parsing the raw input.
Since the only reason we don't parse the raw input is concern that we may not be able to read it (per documentation, but never actually observed), and we do a `strlen()` test anyway, just read it unconditionally.
This should fix cases where POST data wasn't read because of "max_post_size" without impacting anything else.
Test Plan: With very small "max_post_size", updated "ui.footer-items" in Config. Before: form acted as a no-op. After: form submitted.
Maniphest Tasks: T4369
Differential Revision: https://secure.phabricator.com/D21165
Summary: Ref T13516. This isn't terribly clean, but get the page footer into the bottom of the content page on FormationView pages so it doesn't overlap into the side panel.
Test Plan: With and without a footer, viewed normal and FormationView pages. Saw footers in appropriate places at appropriate times.
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21166
Summary:
Ref T13455. Viewstates are fairly small and will probably grow less quickly than the changeset table, but the data is also not important to retain in the long term: if you revisit a change several months after hiding some files, it's fine if we've forgotten that you adjusted the view parameters.
Add a GC with a long default collection policy (180 days) so installs can manage the size of this table if it becomes necessary.
Test Plan: Ran via `bin/garbage` to adjust the GC policy and collect viewstates.
Maniphest Tasks: T13455
Differential Revision: https://secure.phabricator.com/D21164
Summary: Ref T13516. Differential got some new UI elements and behaviors, so update static resource package definitions.
Test Plan:
- Saw JS requests drop from 17 to 4.
- Saw CSS requests drop from 9 to 3.
(These won't quite match production since some JS/CSS is for DarkConsole.)
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21163
Summary: Ref T13516. Hide this UI on devices without the screen width to reasonably support it.
Test Plan: Viewed a revision at various window widths, saw the elements vanish at device widths and reappear at desktop widths.
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21162
Summary:
Ref T13516.
- Add an "Add Comment" navigation anchor.
- Make selection state more clear.
- Make hidden state tidier and more clear.
- Hide "View Options" in the hidden state to dodge all the weird behaviors it implies.
- Click to select/deselect changesets.
- When you open the view dropdown menu, then press "h", close the dropdown menu.
Test Plan: Fiddled with all these behaviors.
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21161
Summary:
Ref T13516. Minor improvements here:
- Show key commands in the "View Options" dropdown.
- Organize it slightly better.
- Improve disabled item behaviors a little bit.
- Add a "Browse Directory" action.
- Rename "...in Diffusion" to "...in Repository".
- Make "d", "D", and "h" use the same targeting rules as "\".
- When you hide a file with the "h" menu item, select it.
Test Plan: Poked at the menu a lot, ran into less questionable behavior.
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21160
Summary: See PHI1707, which has a Jupyter notebook which fails to diff nicely when modified. The root cause seems to be that the document does not end in a newline.
Test Plan: Applied patch, diffed the file, got a Jupyter diff out of it.
Differential Revision: https://secure.phabricator.com/D21159
Summary:
Ref T13455. Make "hidden" a changeset property similar to other changeset properties.
We don't need to render this on the server, so we make a request (to update the setting) and just discard the response.
Test Plan: {F7375468}
Maniphest Tasks: T13455
Differential Revision: https://secure.phabricator.com/D21158
Summary: Ref T13516. Mark low-importance changes (generated code, deleted files) and owned-with-authority changes in the filetree.
Test Plan: {F7375327}
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21157
Summary:
Ref T13516. Deletes all old filetree / flex / active / collapse nav code in favor of the new code.
Restores the inline tips in the path tree.
Test Plan: {F7374175}
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21154
Summary: Ref T13516. Apply basic UI styling to the new UI and make some more interaction work.
Test Plan: {F7374096}
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21153
Summary: Ref T13516. Generate a tree structure based on the page changesets. Still missing styles and a whole lot of behavior.
Test Plan: {F7373967}
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21152
Summary: Ref T13516. This glues "FormationView" to "ChangesetList". The actual tree is not functional in any meaningful way yet.
Test Plan: {F7373838}
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21151
Summary:
Ref T13516. Currently, the "File Tree" element is a semi-dynamic side panel that's implemented as a special mode of a side nav panel.
This implementation is fairly clunky, and arose from organic growth out of the side nav. As such, it has some weird behaviors, doesn't have builtin support for show/hide, and can't generalize easily.
Introduce a "FormationView" which supports loading a page up with piles of side panels in various modes.
Test Plan: No callers and no user-visible impact.
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21150
Summary:
Ref T13515. This restores the "Open in Editor" behavior to Diffusion, and makes "\" work there.
The URI pattern is now sent as a structured template to the client, so the code will work properly if a file path contains "%l".
Test Plan:
- Clicked "Open in Editor" and pressed "\" in Diffusion when viewing a file.
- Clicked a line, hit "\", got the file opened to that line.
Maniphest Tasks: T13515
Differential Revision: https://secure.phabricator.com/D21149
Summary:
Ref T13515. Currently, "Open in Editor" only works with a file-level selection.
- If we have a change-level or inline-level selection, open the parent changeset.
- If we have no selection, but the banner is showing something, open the fine shown in the banner.
Test Plan: With files, inlines, changes, and no selection, pressed "\". Saw files pop open in my external editor.
Maniphest Tasks: T13515
Differential Revision: https://secure.phabricator.com/D21148
Summary: Ref T13515. External editor URIs currently depend on repositories having callsigns, but callsigns are no longer required. Add some variables to support configuring this feature for repositories that do not have callsigns.
Test Plan: Changed settings to use new variables, saw links generate appropriately.
Maniphest Tasks: T13515
Differential Revision: https://secure.phabricator.com/D21147
Summary:
Ref T13515.
- Previously valid editor URIs may become invalid without being changed (if an administrator removes a protocol from the list, for example), but this isn't explained very well. Show an error on the settings page if the current value isn't usable.
- Generate a list of functions from an authority in the parser.
- Generate a list of protocols from configuration.
Test Plan: {F7370872}
Maniphest Tasks: T13515
Differential Revision: https://secure.phabricator.com/D21146
Summary:
Ref T13515. Settings currently has some highly specialized code for rendering "Changes saved." messages. The "saved" state is communicated across a redirect-after-POST by adding `/saved/` to the end of the URI.
This isn't great. It needs a lot of moving pieces, including special accommodations in routing rules. It's user-visible. It has the wrong behavior if you reload the page or navigate directly to the "saved" URI.
Try this scheme, which is also pretty sketchy but seems like an upgrade on the balance:
- Set a cookie on the redirect which identifies the form we just saved.
- On page startup: if this cookie exists, save the value and clear it.
- If the current page started with a cookie identifying the form on the page, treat the page as a "saved" page.
This supports passing a small amount of state across the redirect-after-POST flow, and when you reload the page it doesn't keep the message around. Applications don't need to coordinate it, either. Seems somewhat cleaner?
Test Plan: In Firefox, Safari, and Chrome: saved settings, saw a "Saved changes" banner without any URI junk. Reloaded page, saw banner vanish properly.
Maniphest Tasks: T13515
Differential Revision: https://secure.phabricator.com/D21144
Summary:
Ref T13515. Currently, opening a file to a particular line in an external editor relies on replacing "%l" with "%l" (which is escaped as "%25l") on the server, and then replacing "%25l" with the line number on the client. This will fail if the file path (or any other variable) contains "%l" in its unencoded form.
The parser also can't identify invalid variables.
Pull the parser out, formalize it, and make it generate an intermediate representation which can be sent to the client and reconstituted.
(This temporarily breaks Diffusion and permanently removes the weird, ancient integration in Dark Console.)
Test Plan:
- Added a bunch of tests for the actual parser.
- Used "Open in Editor" in Differential.
Maniphest Tasks: T13515
Differential Revision: https://secure.phabricator.com/D21143
Summary: Ref T13515. No callsites actually use this, most editors don't support it, it doesn't seem terribly useful for the ones that do, it makes template-based APIs for line-number substitution complicated, and we can probably just loop on `window.open()` anyway.
Test Plan: Grepped for affected symbols, found no more references. Loaded settings page, saw no more setting.
Maniphest Tasks: T13515
Differential Revision: https://secure.phabricator.com/D21142
