Summary:
Ref T5833. In some cases, we need to know if an Almanac device is the localhost or not, so we can either handle or forward the request.
To accomplish this, write a device ID when running `bin/almanac register`.
Using `--allow-key-reuse` and `--identify-as`, multiple devices are permitted to //authenticate// as one device but //identify// as different devices. In the Phacility cluster, this allows all the `repoXXX` machines to have one keypair (making key management much easier) but still work as separate devices. This is an advanced feature; normal installs with 1-3 hosts would just generate a key + device per host and identify/authenticate as the same device.
Test Plan: Ran commands with lots of flags like `PHACILITY_INSTANCE=local sudo -E ./bin/almanac register --device daemon.phacility.net --private-key ~/dev/core/conf/keys/daemon.key --force --allow-key-reuse --identify-as local001.phacility.net`. Got a good result from `AlmanacKeys::getDeviceID()` afterward.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5833
Differential Revision: https://secure.phabricator.com/D11452
Summary:
Fixes T6559. No more flash, use Websockets. This is less aggressive than the earlier version, and retains more server logic.
- Support "wss".
- Make the client work.
- Remove "notification.user" entirely.
- Seems ok?
Test Plan:
In Safari, Firefox and Chrome, saw the browsers connect. Made a bunch of comments/updates and saw notifications.
Notable holes in the test plan:
- Haven't tested "wss" yet. I'll do this on secure.
- Notifications are //too fast// now, locally. I get them after I hit submit but before the page reloads.
- There are probably some other rough edges, this is a fairly big patch.
Reviewers: joshuaspence, btrahan
Reviewed By: joshuaspence, btrahan
Subscribers: fabe, btrahan, epriestley
Maniphest Tasks: T6713, T6559
Differential Revision: https://secure.phabricator.com/D11143
Summary:
Ref T2783. This is basically a more refined version of D10400, which churned a bit on things like SSH key storage, the actual way the signing protocol shook out, etc.
- When Phabricator tries to make an intra-cluster service call as the omnipotent user, sign it with the host's device key.
- Add `bin/almanac register` to say "this host is X device, identified by private key Y". This stores the keypair locally, adds the public key to Almanac, and trusts it.
Net effect is that once a host has been registered, the daemons can make calls to other nodes as the omnipotent user. This is primarily necessary so they can access repository API methods on remote hosts.
Test Plan:
- Ran `bin/almanac register` with various valid and invalid inputs.
- Verified keys get generated/added/stored properly.
- Made a device-signed cluster Conduit call.
- Made a normal old user-signed cluster Conduit call.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2783
Differential Revision: https://secure.phabricator.com/D11158
Summary:
Ref T4209. This creates storage for public keys against authorized hosts, such that servers can be authorized to make Conduit calls as the omnipotent user.
Servers are registered into this system by running the following command once:
```
bin/almanac register
```
NOTE: This doesn't implement authorization between servers, just the storage of public keys.
Placing this against Almanac seemed like the most sensible place, since I'm imagining in future that the `register` command will accept more information (like the hostname of the server so it can be found in the service directory).
Test Plan: Ran `bin/almanac register` and saw the host (and public key information) appear in the database.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4209
Differential Revision: https://secure.phabricator.com/D10400
Summary:
Fixes T3923. On `secure.phabricator.com`, we occasionally get slowed to a crawl when someone runs a security scanner against us, or 5 search bots decide to simultaneously index every line of every file in Diffusion.
Every time a user makes a request, give their IP address some points. If they get too many points in 5 minutes, start blocking their requests automatically for a while.
We give fewer points for logged in requests. We could futher refine this (more points for a 404, more points for a really slow page, etc.) but let's start simply.
Also, provide a mechanism for configuring this, and configuring the LB environment stuff at the same time (this comes up rarely, but we don't have a good answer right now).
Test Plan: Used `ab` and reloading over and over again to hit rate limits. Read documentation.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: chad, epriestley
Maniphest Tasks: T3923
Differential Revision: https://secure.phabricator.com/D8713
Summary:
Ref T4222.
- Removes the old map and changes the CelerityResourceMap API to be entirely driven by the new map.
- The new map is about 50% smaller and organized more sensibly.
- This removes the `/pkg/` URI component. All resources are now required to have unique names, so we can tell if a resource is a package or not by looking at the name.
- Removes some junky old APIs.
- Cleans up some other APIs.
- Added some feedback for `bin/celerity map`.
- `CelerityResourceMap` is still a singleton which is inextricably bound to the Phabricator map; this will change in the future.
Test Plan:
- Reloaded pages.
- Verified packaging works by looking at generated includes.
- Forced minification on and verified it worked.
- Forced no-timestamps on and verified it worked.
- Rebuilt map.
- Ran old script and verified error message.
- Checked logs.
Reviewers: btrahan, hach-que
Reviewed By: hach-que
CC: chad, aran
Maniphest Tasks: T4222
Differential Revision: https://secure.phabricator.com/D7872
Summary: Oops -- forgot to do this in D6759.
Test Plan: `git status`
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6760
Summary:
See D5561. Ref T2378.
- Add `support/bin/*` to .gitignore so any symlinks or binaries won't get picked up by Git.
- Add a README so Git preserves the directory and there's at least //some// documentation of its existence.
Test Plan: ummmmm
Reviewers: jevripio, codeblock, btrahan
Reviewed By: jevripio
CC: aran
Maniphest Tasks: T2378
Differential Revision: https://secure.phabricator.com/D5562
Summary:
Currently, there's no easy way for me to tell a user "run this code from the webserver and tell me what it says". Sometimes installs can add new .php files to, e.g., `webroot/rsrc/`, but this is setup-dependent and not universal. Generally I resort to saying "put this into index.php", but that's error prone and not acceptable on active installs.
Add a "debug" controller so I can instead say "put this into support/debug.php, then visit /debug/".
Test Plan: Visited /debug/ with and without support/debug.php files. Visited /staus/.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D5212
Summary: Fixed T2395
Test Plan: When impact.ttf was added to resources/font, it was being used. When renamed, tuffy was.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2395
Differential Revision: https://secure.phabricator.com/D4700
Summary:
- PHABRICATOR_ENV is now optional. If you don't specify it, we won't load a config file.
- PhabricatorSetup is now gone.
- I removed the alternate file domain check for now, see T2380.
- `phabricator.setup` config is now gone.
- Rewrote documentation:
- No more mentions of `phabricator.setup`.
- Normal install guide no longer mentions PHABRICATOR_ENV. This is now an advanced topic.
- Clarified that you only need to set up one of apache, nginx or lighttpd.
- Tweaked a few things I've seen users have difficulty with.
This should have no effect on any existing installs, but make the process much simpler for future installs.
Closes T2221.
Closes T2223.
Closes T2228.
Test Plan:
- Removed my PHABRICATOR_ENV and went through the install process.
- Generated and read documentation.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2221, T2223, T2228
Differential Revision: https://secure.phabricator.com/D4596
Summary:
See discussion in T2221. Before we can move configuration to the database, we have a bootstrapping problem: we need database credentials to live //somewhere// if we can't guess them (and we can only really guess localhost / root / no password).
Some options for this are:
- Have them live in ENV variables.
- These are often somewhat unfamiliar to users.
- Scripts would become a huge pain -- you'd have to dump a bunch of stuff into ENV.
- Some environments have limited ability to set ENV vars.
- SSH is also a pain.
- Have them live in a normal config file.
- This probably isn't really too awful, but:
- Since we deploy/upgrade with git, we can't currently let them edit a file which already exists, or their working copy will become dirty.
- So they have to copy or create a file, then edit it.
- The biggest issue I have with this is that it will be difficult to give specific, easily-followed directions from Setup. The instructions need to be like "Copy template.conf.php to real.conf.php, then edit these keys: x, y, z". This isn't as easy to follow as "run script Y".
- Have them live in an abnormal config file with script access (this diff).
- I think this is a little better than a normal config file, because we can tell users 'run phabricator/bin/config set mysql.user phabricator' and such, which is easier to follow than editing a config file.
I think this is only a marginal improvement over a normal config file and am open to arguments against this approach, but I think it will be a little easier for users to deal with than a normal config file. In most cases they should only need to store three values in this file -- db user/host/pass -- since once we have those we can bootstrap everything else. Normal config files also aren't going away for more advanced users, we're just offering a simple alternative for most users.
This also adds an ENVIRONMENT file as an alternative to PHABRICATOR_ENV. This is just a simple way to specify the environment if you don't have convenient access to env vars.
Test Plan: Ran `config set x y`, verified writes. Wrote to ENVIRONMENT, ran `PHABRICATOR_ENV= ./bin/repository`.
Reviewers: btrahan, vrana, codeblock
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2221
Differential Revision: https://secure.phabricator.com/D4294
Summary:
- These don't fit anywhere in the new design.
- Even if we figure out how to fit them in, 220px logos definitely won't fit on the 320px iPhone screen so anyone who has a custom logo will have to rework them anyway.
- Kill it for now, and once we get the new design in and working maybe we can restore it somehow.
Test Plan: Loaded local install, no logo. Grepped for config.
Reviewers: btrahan, vrana
Reviewed By: vrana
CC: aran
Maniphest Tasks: T1569
Differential Revision: https://secure.phabricator.com/D3101
Summary:
We have custom static resources.
We currently include them in Phabricator's celerity resource map which is causing some pain - we need to regenerate the file without our custom resources before pushing upstream, we need to discard our changes before pulling from upstream and we need to rebuild with our changes to run Phabricator.
This diff allows writing and reading the map in other location.
The plan is this - I will run `celerity_mapper.php` twice - once to build Phabricator-only resources (to push to upstream) and once to build Phabricator + ours resoruces to put in our directory.
Better solution would be to create a map just with our resources and read and combine it with Phabricator resources.
But it is complicated because we have dependencies on Phabricator resources.
Test Plan:
`celerity_mapper.php webroot`
`celerity_mapper.php webroot ../facebook/src/__celerity_resource_map__.php`
Delete Phabricator's celerity map, set 'celerity.resource-path' and successfully load Phabricator.
Reviewers: epriestley, edward
Reviewed By: epriestley
CC: aran, Koolvin
Maniphest Tasks: T721
Differential Revision: https://secure.phabricator.com/D2630
Summary: A bunch of installs are doing this to varying degrees of success anyway, make it easier and nudge them toward a more consistent approach.
Test Plan: Set a custom logo, viewed normal and admin pages.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T700
Differential Revision: https://secure.phabricator.com/D2019
Summary:
First stab at a batch editor for Maniphest. Basically, you can select a group of
tasks and then import them into the "batch" interface, where you can edit all of
them at once.
High level goal is to make it easier for users in PM/filer/support/QA roles to
deal with large numbers of tasks quickly.
This implementation has a few major limitations:
- The only available actions are "add projects" and "remove projects".
- There is no review / undo / log stuff.
- All the changes are applied in-process, which may not scale terribly well.
However, the immediate need is just around projects and this seemed like a
reasonable place to draw the line for a minimal useful version of the tool.
Test Plan: Used batch editor to add and remove projects from groups of tasks.
Reviewers: btrahan, yairlivne
Reviewed By: btrahan
CC: aran, epriestley, sandra
Maniphest Tasks: T441
Differential Revision: https://secure.phabricator.com/D1680
Test Plan: Look at a task detail. Some dummy attributes are automatically added in ManiphestTaskDetailController.
Reviewed By: epriestley
Differential Revision: 730
Summary:
Make sure emacs and vim swap files don't get added.
Test Plan:
Try to add them, and watch them not get added.
Reviewers:
epriestley
CC:
Differential Revision: 427
