Summary:
Ref T4571. When a database goes down briefly, we fall back to replicas.
However, this fallback is slow (not good for users) and keeps sending a lot of traffic to the master (might be bad if the root cause is load-related).
Keep track of recent connections and fully degrade into "severed" mode if we see a sequence of failures over a reasonable period of time. In this mode, we send much less traffic to the master (faster for users; less load for the database).
We do send a little bit of traffic still, and if the master recovers we'll recover back into normal mode seeing several connections in a row succeed.
This is similar to what most load balancers do when pulling web servers in and out of pools.
For now, the specific numbers are:
- We do at most one health check every 3 seconds.
- If 5 checks in a row fail or succeed, we sever or un-sever the database (so it takes about 15 seconds to switch modes).
- If the database is currently marked unhealthy, we reduce timeouts and retries when connecting to it.
Test Plan:
- Configured a bad `master`.
- Browsed around for a bit, initially saw "unrechable master" errors.
- After about 15 seconds, saw "major interruption" errors instead.
- Fixed the config for `master`.
- Browsed around for a while longer.
- After about 15 seconds, things recovered.
- Used "Cluster Databases" console to keep an eye on health checks: it now shows how many recent health checks were good:
{F1213397}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4571
Differential Revision: https://secure.phabricator.com/D15677
Summary:
Ref T4571. If we fail to connect to the master, automatically try to degrade into a temporary read-only mode ("UNREACHABLE") for the remainder of the request, if possible.
If the request was something like "load the homepage", that'll work fine. If it was something like "submit a comment", there's nothing we can do and we just have to fail.
Detecting this condition imposes a performance penalty: every request checks the connection and gives the database a long time to respond, since we don't want to drop writes unless we have to. So the degraded mode works, but it's really slow, and may perpetuate the problem if the root issue is load-related.
This lays the groundwork for improving this case by degrading futher into a "SEVERED" mode which will persist across requests. In the future, if several requests in a short period of time fail, we'll sever the database host and refuse to try to connect to it for a little while, connecting directly to replicas instead (basically, we're "health checking" the master, like a load balancer would health check a web application server). This will give us a better (much faster) degraded mode in a major service disruption, and reduce load on the master if the root cause is load-related, giving it a better chance of recovering on its own.
Test Plan:
- Disabled master in config by changing the host/username, got degraded automatically to UNREACAHBLE mode immediately.
- Faked full SEVERED mode, requests hit replicas and put me in the mode properly.
- Made stuff work, hit some good pages.
- Hit some non-cluster pages.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4571
Differential Revision: https://secure.phabricator.com/D15674
Summary: Ref T4571. If `cluster.databases` is configured but only has replicas, implicitly drop to read-only mode and send writes to a replica.
Test Plan:
- Disabled the `master`, saw Phabricator automatically degrade into read-only mode against replicas.
- (Also tested: explicit read-only mode, non-cluster mode, properly configured cluster mode).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4571
Differential Revision: https://secure.phabricator.com/D15672
Summary:
Ref T4571. Allows users to click the "read-only mode" notification to get more information about why an install is in read-only mode.
Installs can be in this mode for several reasons (explicit administrative action, no masters defined, no masters reachable), and it's useful to be able to tell the difference.
Test Plan: {F1212930}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4571
Differential Revision: https://secure.phabricator.com/D15671
Summary: Ref T4571. The configuration option still doesn't do anything, but add a status panel for basic setup monitoring.
Test Plan:
Here's what a good version looks like:
{F1212291}
Also faked most of the errors it can detect and got helpful diagnostic messages like this:
{F1212292}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4571
Differential Revision: https://secure.phabricator.com/D15667
Summary:
Ref T4571. This adds a new option which allows you to upgrade your one-host configuration to a multi-host configuration by configuring it.
Doing this currently does nothing. I wrote a lot of words about what it is //supposed// to do in the future, though.
Test Plan:
- Tried to configure the option in all the possible bad ways, got errors.
- Read documentation.
Reviewers: chad
Reviewed By: chad
Subscribers: eadler
Maniphest Tasks: T4571
Differential Revision: https://secure.phabricator.com/D15663
Summary: Fixes T10684. Fixes T10520. This primarily implements a date/epoch field, and then does a bunch of standard plumbing.
Test Plan:
- Created countdowns.
- Edited countdowns.
- Used HTTP prefilling.
- Created a countdown ending on "Christmas Morning", etc.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10520, T10684
Differential Revision: https://secure.phabricator.com/D15655
Summary: Closes T10690
Test Plan: Open Badges application, go to Advanced Search, search for a badge by its name and see result.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Maniphest Tasks: T10690
Differential Revision: https://secure.phabricator.com/D15656
Summary:
Ref T10262. This removes one-time tokens and makes file data responses always-cacheable (for 30 days).
The URI will stop working once any attached object changes its view policy, or the file view policy itself changes.
Files with `canCDN` (totally public data like profile images, CSS, JS, etc) use "cache-control: public" so they can be CDN'd.
Files without `canCDN` use "cache-control: private" so they won't be cached by the CDN. They could still be cached by a misbehaving local cache, but if you don't want your users seeing one anothers' secret files you should configure your local network properly.
Our "Cache-Control" headers were also from 1999 or something, update them to be more modern/sane. I can't find any evidence that any browser has done the wrong thing with this simpler ruleset in the last ~10 years.
Test Plan:
- Configured alternate file domain.
- Viewed site: stuff worked.
- Accessed a file on primary domain, got redirected to alternate domain.
- Verified proper cache headers for `canCDN` (public) and non-`canCDN` (private) files.
- Uploaded a file to a task, edited task policy, verified it scrambled the old URI.
- Reloaded task, new URI generated transparently.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10262
Differential Revision: https://secure.phabricator.com/D15642
Summary:
Ref T6027. Try this out and see how it feels? Clear issues:
- This definitely shouldn't be at the top.
- You should probably be able to select it multiple times?
- Some of the "which columns show up" rules might need adjustment?
- Diamond marker maybe not great?
Not sure I love this but it doesn't feel //terrible//...
Test Plan: {F1207891}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6027
Differential Revision: https://secure.phabricator.com/D15638
Summary: Ref T5214. Fixes T10486. Ref T6027. This exposes the `TYPE_COLUMNS` transaction in a usable way via API, and fixes the interactions via prefilling.
Test Plan:
- Created tasks directly into columns via API.
- Moved tasks between columns via API.
- Used `?column=...` to try to create a template task with valid and bogus column PHIDs.
Reviewers: chad
Reviewed By: chad
Subscribers: AmyLewis
Maniphest Tasks: T5214, T6027, T10486
Differential Revision: https://secure.phabricator.com/D15636
Summary: Ref T10671
Test Plan: Open Conduit application, open `badges.edit` or `badges.search`, create, edit, or query for a badge.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T10671
Differential Revision: https://secure.phabricator.com/D15622
Summary: Ref T7673. This is really just so I can force admin.phacility.com logout when you log out of an instance, but there are a few other things we could move here eventually, like the WILLREGISTERUSER event.
Test Plan: Logged out of an instance, got logged out of parent (see next change).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7673
Differential Revision: https://secure.phabricator.com/D15629
Summary: Ref T7303. This interaction is very oldschool; modernize it to enable/disable instead of "nuke from orbit".
Test Plan:
- Enabled applications.
- Disabled applications.
- Viewed applications in list view.
- Generated new tokens.
- Tried to use a token from a disabled application (got rebuffed).
- Tried to use a token from an enabled application (worked fine).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7303
Differential Revision: https://secure.phabricator.com/D15620
Summary: Ref T7303. This application is currently stone-age tech (no transactions, hard "delete" action). Bring it up to modern specs.
Test Plan:
- Created and edited an OAuth application.
- Viewed transaction record.
- Tried to create something with no name, invalid redirect URI, etc. Was gently rebuffed with detailed explanatory errors.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7303
Differential Revision: https://secure.phabricator.com/D15609
Summary:
Ref T7303. Ref T7673. This implements an "auth.logout" which:
- terminates all web sessions;
- terminates the current OAuth token if called via OAuth; and
- may always be called via OAuth.
(Since it consumes an OAuth token, even a "malicious" OAuth application can't really be that much of a jerk with this: it can't continuously log you out, since calling the method once kills the token. The application would need to ask your permission again to get a fresh token.)
The primary goal here is to let Phacility instances call this against the Phacility upstream, so that when you log out of an instance it also logs you out of your Phacility account (possibly with a checkbox or something).
This also smooths over the session token code. Before this change, your sessions would get logged out but when you reloaded we'd tell you your session was invalid.
Instead, try to clear the invalid session before telling the user there's an issue. I think that ssentially 100% of invalid sessions are a result of something in this vein (e.g., forced logout via Settings) nowadays, since the session code is generally stable and sane and has been for a long time.
Test Plan:
- Called `auth.logout` via console, got a reasonable logout experience.
- Called `auth.logout` via OAuth.
- Tried to make another call, verified OAuth token had been invalidated.
- Verified web session had been invalidated.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7303, T7673
Differential Revision: https://secure.phabricator.com/D15594
Summary:
Ref T7303. This inches toward properly-behaved cluster logout.
- Use IDs instead of PHIDs in URIs.
- Slightly more modern code.
- Fix some crumb stuff.
Test Plan: Created, edited, viewed, deleted, showed secret for, authorized, test-auth'd an application.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7303
Differential Revision: https://secure.phabricator.com/D15592
Summary: Pulls everything over to two column UI and new edit pages. Removed history view and consolidated some pages.
Test Plan: New Panel, Edit Panel. New Dashboard, Edit Dashboard, View Standalone pages.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15588
Summary: Adds basic commenting to Fund Initiatives.
Test Plan: Leave a comment, see comment.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15554
Summary:
[WIP] Allows awarding a badge from a user profile. Unsure of the interactions here if a user can't award any badges, or if we should just hide this.
Fixes T10688
Fixes T10318
Test Plan: Award some badges. Steal them back.
Reviewers: lpriestley, epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10318, T10688
Differential Revision: https://secure.phabricator.com/D15544
Summary:
Ref T10537. Currently, Nuance has a `NuanceRequestor` object, intended to represent the external user who created content (e.g., a GitHub account or a Twitter account or whatever).
This object is currently almost unused, and its design predates Doorkeeper. In D15541, I chose to use doorkeeper objects instead of NuanceRequestor objects to represent requestors.
I don't currently anticipate a need for such an object, given that we have Doorkeeper. If we do need it in the future for some reason, it would be fairly easy to restore it, create a requestor type which wraps a Doorkeeper object, and then migrate. Not super thrilling to do that, but not a huge mess.
`NuanceItem` still has a `requestorPHID`, but this is now a less formal object PHID instead of a more formal Requestor-object PHID, and holds a doorkeeper exeternal object PHID for GitHub events.
Test Plan:
- Grepped for `nuancerequestor`.
- Ran `bin/storage upgrade -f`.
- Grepped for `requestor`, remaining uses of this term seem reasonable/correct.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10537
Differential Revision: https://secure.phabricator.com/D15546
Summary: This is kinda bad in terms of UI (It just makes a json of the thing and diffs that), but it's a start.
Test Plan: edit rule, create rule, add/remove/edit conditions, actions
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15542
Summary:
Ref T10538. Ref T10537. This creates PHIDs which represent GitHub users, and uses them as the actors for synchronized comments.
I've just made them Doorkeeper objects. There are three major kinds of objects they //could// possibly be:
- Nuance requestor objects.
- External account objects.
- Doorkeeper objects.
I don't think we actually need distinct nuance requestor objects. These don't really do anything right now, and were originally created before Doorkeeper. I think Doorkeeper is a superset of nuance requestor functionality, and better developed and more flexible.
Likewise, doorkeeper objects are much more flexible than external account objects, and it's nice to imagine that we can import from Twootfeed or whatever without needing to build full OAuth for it. I also like less stuff touching auth code, when possible.
Making these separate from external accounts does make it a bit harder to reconcile external users with internal users, but I think that's OK, and that it's generally desirable to show the real source of a piece of content. That is, if I wrote a comment on GitHub but also have a Phabricator account, I think it's good to show "epriestley (GitHub)" (the GitHub user) as the author, not "epriestley" (the Phabricator user). I think this is generally less confusing overall, and we can add more linkage later to make it clearer.
Test Plan:
{F1194104}
{F1194105}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10537, T10538
Differential Revision: https://secure.phabricator.com/D15541
Summary: Ref T10537. Add a new content source for Nuance. Prepare for better author attribution.
Test Plan: {F1194038}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10537
Differential Revision: https://secure.phabricator.com/D15539
Summary: Ref T8996, Convert badge recipients from Edges to actual BadgeAward objects
Test Plan: Create badge, award it to recipient. Make sure adding/removing recipients works. (Still need to migrate exisiting recipients to new table and need to create activity feed blurbs)
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: chad, Korvin
Maniphest Tasks: T8996
Differential Revision: https://secure.phabricator.com/D15014
Summary:
Ref T10537. For Nuance, I want to introduce new sources (like "GitHub" or "GitHub via Nuance" or something) but this needs to modularize eventually.
Split ContentSource apart so applications can add new content sources.
Test Plan:
This change has huge surface area, so I'll hold it until post-release. I think it's fairly safe (and if it does break anything, the breaks should be fatals, not anything subtle or difficult to fix), there's just no reason not to hold it for a few hours.
- Viewed new module page.
- Grepped for all removed functions/constants.
- Viewed some transactions.
- Hovered over timestamps to get content source details.
- Added a comment via Conduit.
- Added a comment via web.
- Ran `bin/storage upgrade --namespace XXXXX --no-quickstart -f` to re-run all historic migrations.
- Generated some objects with `bin/lipsum`.
- Ran a bulk job on some tasks.
- Ran unit tests.
{F1190182}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10537
Differential Revision: https://secure.phabricator.com/D15521
Summary: Ref T10537. Show when an object is bridged to something external.
Test Plan: {F1190099}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10537
Differential Revision: https://secure.phabricator.com/D15520
Summary:
Ref T10537. Generally, when users interact with Nuance items we'll dump a command into a queue and apply it in the background. This avoids race conditions with multiple users interacting with an item, which Nuance is more subject to than other applications because it has an import/external component.
The "sync" command doesn't actually do anything yet.
Test Plan: {F1186365}
Reviewers: chad
Reviewed By: chad
Subscribers: Luke081515.2
Maniphest Tasks: T10537
Differential Revision: https://secure.phabricator.com/D15506
Summary:
Ref T10537. This allows item types to expose item actions. Eventually these actions might be things like "promote to task", "tweet reply", "ban user forever", etc.
For now, provide a simple action which shows a raw item in a dialog.
Test Plan: {F1185573}
Reviewers: chad
Reviewed By: chad
Subscribers: Luke081515.2
Maniphest Tasks: T10537
Differential Revision: https://secure.phabricator.com/D15504
Summary:
Ref T10537. These are objects which are bound to some external object, like a Maniphest task which is a representation of a GitHub issue.
This doesn't do much yet and may change, but my thinking is:
- I'm putting these on-object instead of on edges because I think we want to actively change the UI for them (e.g., clearly call out that the object is bridged) but don't want every page to need to do extra queries in the common case where zero bridged objects exist anywhere in the system.
- I'm making these one-to-one, more or less: an issue can't be bridged to a bunch of tasks, nor can a bunch of tasks be bridged to a single issue. Pretty sure this makes sense? I can't come up with any reasonable, realistic cases where you want a single GitHub issue to publish to multiple different tasks in Maniphest.
- Technically, one type of each bridgable object could be bridged, but I expect this to never actually occur. Hopefully.
Test Plan: Ran storage upgrade, loaded some pages.
Reviewers: chad
Reviewed By: chad
Subscribers: Luke081515.2
Maniphest Tasks: T10537
Differential Revision: https://secure.phabricator.com/D15502
Summary: Ref T9456. This makes everything work, except that CircleCI doesn't fetch tags which are not ancestors of branch heads.
Test Plan: Ran passing builds through CircleCI.
Reviewers: chad
Reviewed By: chad
Subscribers: dpaola2, JustinTulloss
Maniphest Tasks: T9456
Differential Revision: https://secure.phabricator.com/D14288
Summary: Ref T9456. Some rough edges and we can't complete the build yet since I haven't written a webhook, but this mostly seems to be working.
Test Plan:
- Ran this build on some stuff.
- Ran a normal HTTP step build to make sure I didn't break that.
{F880301}
{F880302}
{F880303}
Reviewers: chad
Reviewed By: chad
Subscribers: JustinTulloss, joshma
Maniphest Tasks: T9456
Differential Revision: https://secure.phabricator.com/D14286
Summary: Ref T9456. This is just a convenience type for things like API tokens, to make it harder for users to make mistakes and keep SSH keys out of the dropdown for "choose your API token".
Test Plan: {F879820}
Reviewers: chad
Reviewed By: chad
Subscribers: joshuaspence
Maniphest Tasks: T9456
Differential Revision: https://secure.phabricator.com/D14284
Summary: Ref T7789. Make sure these get cleaned up when a repository is destroyed.
Test Plan:
- Created a new repository.
- Pushed some LFS data to it.
- Used `bin/remove destroy` to nuke it.
- Verified the LFS stuff was cleaned up and the underlying files were destroyed (`SELECT * FROM repository_gitlfsref`, etc).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7789
Differential Revision: https://secure.phabricator.com/D15493
Summary:
Ref T7789. Ref T10604. This implements the `upload` action, which streams file data into Files.
This makes Git LFS actually work, at least roughly.
Test Plan:
- Tracked files in an LFS repository.
- Pushed LFS data (`git lfs track '*.png'; git add something.png; git commit -m ...; git push`).
- Pulled LFS data (`git checkout master^; rm -rf .git/lfs; git checkout master; open something.png`).
- Verified LFS refs show up in the gitlfsref table.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7789, T10604
Differential Revision: https://secure.phabricator.com/D15492
Summary:
Ref T7789. This implements:
- A new table to store the `<objectHash, filePHID>` relationship between Git LFS files and Phabricator file objects.
- A basic response to `batch` commands, which return actions for a list of files.
Test Plan:
Ran `git lfs push origin master`, got a little further than previously:
```
epriestley@orbital ~/dev/scratch/poemslocal $ git lfs push origin master
Git LFS: (2 of 1 files) 174.24 KB / 87.12 KB
Git LFS operation "upload/b7e0aeb82a03d627c6aa5fc1bbfd454b6789d9d9affc8607d40168fa18cf6c69" is not supported by this server.
Git LFS operation "upload/b7e0aeb82a03d627c6aa5fc1bbfd454b6789d9d9affc8607d40168fa18cf6c69" is not supported by this server.
```
With `GIT_TRACE=1`, this shows the batch part of the API going through.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7789
Differential Revision: https://secure.phabricator.com/D15489
Summary:
adds the `{{PHID....}}` rule. Should mostly be useful in UI code that refers to Objects.
It doesn't add any mention links/transactions.
Test Plan: Comment with this, see email (plain + html) and comment box.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15488
Summary:
Ref T7789. This builds on top of `git-lfs-authenticate` to detect LFS requests, read LFS tokens, and route them to a handler which can do useful things.
This handler promptly drops them on the floor with an error message.
Test Plan:
Here's a transcript showing the parts working together so far:
- `git-lfs` connects to the server with SSH, and gets told how to connect with HTTP to do uploads.
- `git-lfs` uses HTTP, and authenticates with the tokens properly.
- But the server tells it to go away, and that it doesn't support anything, so the operation ultimately fails.
```
$ GIT_TRACE=1 git lfs push origin master
12:45:56.153913 git.c:558 trace: exec: 'git-lfs' 'push' 'origin' 'master'
12:45:56.154376 run-command.c:335 trace: run_command: 'git-lfs' 'push' 'origin' 'master'
trace git-lfs: Upload refs origin to remote [master]
trace git-lfs: run_command: git rev-list --objects master --not --remotes=origin
trace git-lfs: run_command: git cat-file --batch-check
trace git-lfs: run_command: git cat-file --batch
trace git-lfs: run_command: 'git' config -l
trace git-lfs: tq: starting 3 transfer workers
trace git-lfs: tq: running as batched queue, batch size of 100
trace git-lfs: prepare upload: b7e0aeb82a03d627c6aa5fc1bbfd454b6789d9d9affc8607d40168fa18cf6c69 lfs/dog1.jpg 1/1
trace git-lfs: tq: sending batch of size 1
trace git-lfs: ssh: local@localvault.phacility.com git-lfs-authenticate diffusion/18/poems.git upload
trace git-lfs: api: batch 1 files
trace git-lfs: HTTP: POST http://local.phacility.com/diffusion/POEMS/poems.git/info/lfs/objects/batch
trace git-lfs: HTTP: 404
trace git-lfs: HTTP: {"message":"Git LFS operation \"objects\/batch\" is not supported by this server."}
trace git-lfs: HTTP:
trace git-lfs: api: batch not implemented: 404
trace git-lfs: run_command: 'git' config lfs.batch false
trace git-lfs: tq: batch api not implemented, falling back to individual
trace git-lfs: ssh: local@localvault.phacility.com git-lfs-authenticate diffusion/18/poems.git upload b7e0aeb82a03d627c6aa5fc1bbfd454b6789d9d9affc8607d40168fa18cf6c69
trace git-lfs: api: uploading (b7e0aeb82a03d627c6aa5fc1bbfd454b6789d9d9affc8607d40168fa18cf6c69)
trace git-lfs: HTTP: POST http://local.phacility.com/diffusion/POEMS/poems.git/info/lfs/objects
trace git-lfs: HTTP: 404
trace git-lfs: HTTP: {"message":"Git LFS operation \"objects\" is not supported by this server."}
trace git-lfs: HTTP:
trace git-lfs: tq: retrying 1 failed transfers
trace git-lfs: ssh: local@localvault.phacility.com git-lfs-authenticate diffusion/18/poems.git upload b7e0aeb82a03d627c6aa5fc1bbfd454b6789d9d9affc8607d40168fa18cf6c69
trace git-lfs: api: uploading (b7e0aeb82a03d627c6aa5fc1bbfd454b6789d9d9affc8607d40168fa18cf6c69)
trace git-lfs: HTTP: POST http://local.phacility.com/diffusion/POEMS/poems.git/info/lfs/objects
trace git-lfs: HTTP: 404
trace git-lfs: HTTP: {"message":"Git LFS operation \"objects\" is not supported by this server."}
trace git-lfs: HTTP:
Git LFS: (0 of 1 files) 0 B / 87.12 KB
Git LFS operation "objects" is not supported by this server.
Git LFS operation "objects" is not supported by this server.
```
Reviewers: chad
Reviewed By: chad
Subscribers: eadler
Maniphest Tasks: T7789
Differential Revision: https://secure.phabricator.com/D15485
Summary:
Ref T7789. This implements a (probably) usable "git-lfs-authenticate" on top of the new temporary token infrastructure.
This won't actually do anything yet, since nothing reads the tokens.
Test Plan:
```
$ ./bin/ssh-exec --phabricator-ssh-user admin --ssh-command 'git-lfs-authenticate'
phabricator-ssh-exec: Expected `git-lfs-authenticate <path> <operation>`, but received too few arguments.
```
```
$ ./bin/ssh-exec --phabricator-ssh-user admin --ssh-command 'git-lfs-authenticate x'
phabricator-ssh-exec: Unrecognized repository path "x". Expected a path like "/diffusion/X/" or "/diffusion/123/".
```
```
$ ./bin/ssh-exec --phabricator-ssh-user admin --ssh-command 'git-lfs-authenticate diffusion/22'
Exception: Expected `git-lfs-authenticate <path> <operation>`, but received too few arguments.
```
```
$ ./bin/ssh-exec --phabricator-ssh-user admin --ssh-command 'git-lfs-authenticate diffusion/22 y'
Exception: Git LFS operation "y" is not supported by this server.
```
```
$ ./bin/ssh-exec --phabricator-ssh-user admin --ssh-command 'git-lfs-authenticate diffusion/22 upload'
{"header":{"Authorization":"Basic QGdpdC1sZnM6NmR2bDVreWVsaXNuMmtnNXBtbnZwM3VlaWhubmI1bmI="},"href":"http:\/\/local.phacility.com\/diffusion\/22\/new-callsign-free-repository.git\/info\/lfs"}
```
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7789
Differential Revision: https://secure.phabricator.com/D15482
Summary: Fixes T10603. This is the last of the ad-hoc temporary tokens.
Test Plan:
- Used a file token.
- Viewed type in {nav Config > Temporary Tokens}.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10603
Differential Revision: https://secure.phabricator.com/D15481
Summary: Ref T10603. Swap these over and give them nice UI strings.
Test Plan:
- Refreshed a Twitter OAuth link.
- Unlinked and re-linked a Twitter account.
- Viewed the new type in {nav Config > Temporary Tokens}.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10603
Differential Revision: https://secure.phabricator.com/D15480
Summary:
Ref T10603. We have a couple of sort of ad-hoc tokens, so start formalizing them. First up is MFA tokens.
Also adds a new config module panel for these.
Test Plan:
- Added MFA.
- Added MFA, intentionally fumbled the input, completed the workflow.
- Removed MFA.
- Viewed tokens, saw MFA sync tokens.
- Viewed new module config panel.
{F1177014}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10603
Differential Revision: https://secure.phabricator.com/D15479
Summary:
Ref T10603. For LFS, we need to issue a new type of temporary token.
This makes the temporary token code modular so applications can add new token types without modifying the Auth application.
(I'm moving slowly here because it impacts authentication.)
Test Plan:
- Used `bin/auth recover` to get a one-time token from the CLI.
- Used "Forgot your password?" to get a one-time token from the web UI.
- Followed the web UI token to initiate a password reset, prompting generation of a password token.
- Viewed these tokens in the web UI:
{F1176908}
- Revoked a token.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10603
Differential Revision: https://secure.phabricator.com/D15475
Summary:
First pass at converting Differential, I likely have some buggy-poos but thought I'd toss this up now in case very bad bugs present.
To do:
- Need to put status back on Hovercards
- "Diff Detail" probably needs a better design
Test Plan: Looking at lots of diffs, admittedly I dont have harbormaster, etc, running locally. Checked Diffusion for Table of Content changes on small and large commits.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15463
Summary: Fixes T10546. Some day, decades from now, we can revisit this when we iterate on Phrequent. Just don't regress for no real reason in the meantime, since it's easy enough to keep it working in reasonable shape.
Test Plan: {F1169096}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10546
Differential Revision: https://secure.phabricator.com/D15461
Summary:
Ref T10538.
This is a tiny fraction of the API. GitHub has 25 primary event types; we currently partially parse 3 of them. GitHub has 17 issue event types; we currently partially parse 12.
Test Plan: Ran `arc unit`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10538
Differential Revision: https://secure.phabricator.com/D15448
Summary:
Ref T10538. This sets up a Doorkeeper bridge for GitHub issues, and pulls issues from GitHub to create ExternalObject references.
Broadly, does nothing useful.
Test Plan: Put a `var_dump()` in there somewhere and saw it probably do something when running `bin/nuance update --item 44`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10538
Differential Revision: https://secure.phabricator.com/D15447
Summary:
Ref T10538. The primary GitHub event activity stream does not report minor events (labels, milestones, etc).
GitHub has a second, similar activity stream which does report these events (the "Issues Events API").
Use two separate cursors: one consumes the primary stream; the second consumes the events stream.
One possible issue with this is that we may write events in a different order than they occurred, so GitHub shows "comment, label, close" but we show "comment, close, label" or similar. This is probably OK because the secondary API doesn't seem to have any very important events (e.g., it's probably fine if label changes are out-of-order), but we can conceivably put some buffer stage in between the two if it's an issue.
Test Plan: {F1164894}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10538
Differential Revision: https://secure.phabricator.com/D15446
