Summary:
Depends on D19281. This increases consistency between build timeline publishing and revision draft promotion.
There's no real behavioral change here (switching how publishing worked already changed the beahvior) but this sends more callsites down the same code paths.
Since the builds we're looking at include completed builds, change the term "active" to "impactful". This describes the same set of builds, but hopefully describes them more accurately.
Test Plan: Created a local revision, saw it plausibly interact with draft status and promote. There are a lot of moving parts here and some stuff may well have slipped through.
Differential Revision: https://secure.phabricator.com/D19282
Summary:
Depends on D19280. Ref T13110. Although Harbormaster cares about all builds, Differential does not practically care about local lint and unit results in determining build status.
In Differential, orient publishing around "remote builds" instead of "builds".
This does not yet change any of the draft logic, it just makes the timeline story use newer logic.
Test Plan: Used `bin/harbormaster publish` (with some guard-clause removal) to publish some buildables to revisions without anything crashing.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13110
Differential Revision: https://secure.phabricator.com/D19281
Summary:
Depends on D19279. Ref T13110. This implements the existing publishing logic for buildables, but does so via ModularTransactions instead of a core transaction type.
Since each application is implementing build transactions independently, this removes the core type.
Next, Differential will get a similar treatment.
Test Plan: Used `bin/harbormaster publish` (with some commenting-out-guard-clauses) to publish a commit Buildable; saw unchanged feed behavior.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13110
Differential Revision: https://secure.phabricator.com/D19280
Summary:
Depends on D19278. Ref T13110. This moves most of the structural logic for publishing builds to BuildableEngine and provides a `bin/harbormaster publish` to make publishing easy to retry/debug.
This intentionally removes the bit which actually does anything when builds publish. Followup changes will implement application-specific versions of the publishing logic in Differential and Diffusion.
Test Plan: Ran `bin/harbormaster publish Bxxx`, saw it do nothing (but not crash).
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13110
Differential Revision: https://secure.phabricator.com/D19279
Summary:
Ref T13110. Currently, build status is published the same way for every Buildable by the BuildEngine.
I want to change this to delegate publishing to each Buildable, particularly so that Differential may use more detailed rules for handling builds and drafts.
Rather than add additional methods to the existing `BuildableInterface`, add an engine generator method instead. This is a pattern which has seen more use recently (e.g., in Ferret) and lets us pay a little more upfront to pull complex pieces of logic out of the main class and let them use inheritence more easily. If we had Traits that might cover this to some degree.
I'd expect to eventually reduce the size of `BuildableInterface` and move the `CircleCI` and `BuildKite` interfaces so that the `BuildableEngine` implements them instead of the main object.
Here, this new engine does nothing and is never instantiated. In upcoming changes, publishing logic will move into it so that Differential can handle publishing differently.
Test Plan: Ran `arc liberate`, loaded pages, grepped for `BuildableInterface`.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13110
Differential Revision: https://secure.phabricator.com/D19278
Summary: Depends on D19273. Ref T13105. Adds "Change Text Encoding..." and "Highlight As..." options when rendering documents, and makes an effort to automatically detect and handle text encoding.
Test Plan:
- Uploaded a Shift-JIS file, saw it auto-detect as Shift-JIS.
- Converted files between encodings.
- Highlighted various things as "Rainbow", etc.
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19274
Summary:
Ref T13105. This is silly, but "py" and "python" end up in different places today, and "py" is ~100x faster than "python".
See also T3626 for longer-term plans on this.
Test Plan: Reloaded a Jupyter notebook, saw it render almost instantly instead of taking a few seconds.
Reviewers: mydeveloperday
Reviewed By: mydeveloperday
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19273
Summary:
Ref T13114. See PHI514. This makes some attempt to undo the damage caused by incorrectly publishing a repository.
Don't run this.
Test Plan: Yikes.
Maniphest Tasks: T13114
Differential Revision: https://secure.phabricator.com/D19271
Summary:
Ref T13114. See PHI511. Ref T13072. This makes Buildables, Builds, Targets and Artifacts destructible with `bin/remove destroy`.
This might not be totally exhaustive. In particular:
- File artifacts won't destroy the file. This is sort of okay because file artifacts are currently just a file reference, but probably shouldn't be how things work in the long term.
- `BuildCommand` doesn't get cleaned up, but `BuildMessage` does on `Build`. See T13072 for more.
Test Plan: Used `bin/remove destroy` to nuke a bunch of builds, buildables, etc. Loaded stuff in the web UI and it all looked like it got nuked properly.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13114, T13072
Differential Revision: https://secure.phabricator.com/D19269
Summary:
Ref T13114.
- Followup fix for D19267, which didn't work correctly with //new// revision creation.
- Followup fix for changes in T11015. Some of the querying logic was still handling "/x.y" and "/x.y/" differently. Instead, normalize consistently to "/x.y/"
Test Plan:
- Created a new revision cleanly.
- Created a package owning only a `example.txt` file and saw Differential find it as an owning package in the table of contents.
Maniphest Tasks: T13114
Differential Revision: https://secure.phabricator.com/D19268
Summary: Ref T13114. See PHI515. Updating a revision with the same, currently active diff became an error at some point (probably D19175). This is inconsistent; make it an allowable no-op instead.
Test Plan:
- Updated a revision's diff via Conduit.
- Updated to the same diff, no-op.
- Tried to update a different revision, error ("already attached elsewhere").
- Updated with a different diff.
- Tried to update with the original diff, error ("previously attached version").
Maniphest Tasks: T13114
Differential Revision: https://secure.phabricator.com/D19267
Summary: See PHI514. Ref T13114. Ref T8951. When a push is an "initial import" (a push of at least 7 commits to an empty repository) don't run Herald or enormous change protection.
Test Plan: Pushed some non-initial changes to a repository, and some initial changes.
Maniphest Tasks: T13114, T8951
Differential Revision: https://secure.phabricator.com/D19265
Summary: See PHI513. `fprintf()` takes `(thing, pattern, args, ...)` but we aren't passing a `pattern`, so if the command returns a "%" in the output we get an error.
Test Plan:
- Installed `bytes`, a great useful program which prints all the bytes, on my HoaxOS(tm) system (see D19102).
```
epriestley@orbital ~/dev/phabricator $ ./bin/drydock command --lease 76287 -- bytes # Before patch.
[2018-03-29 02:09:08] ERROR 2: fprintf(): Too few arguments at [/Users/epriestley/dev/core/lib/phabricator/src/applications/drydock/management/DrydockManagementCommandWorkflow.php:60]
arcanist(head=experimental, ref.master=b8c9c385a7f5, ref.experimental=925c60e7b837), corgi(head=master, ref.master=6371578c9d32), instances(head=master, ref.master=d983b9517924), ledger(head=master, ref.master=4da4a24b8779), libcore(), phabricator(head=hoax1, ref.master=b586ee065a75, ref.hoax1=f8d7480bbdd1, custom=4), phutil(head=master, ref.master=1ad42491e44a), secure(head=master, ref.master=988cf9bd7958), services(head=master, ref.master=6b3fb8d8dd0a)
#0 fprintf(resource, string) called at [<phabricator>/src/applications/drydock/management/DrydockManagementCommandWorkflow.php:60]
#1 DrydockManagementCommandWorkflow::execute(PhutilArgumentParser) called at [<phutil>/src/parser/argument/PhutilArgumentParser.php:441]
#2 PhutilArgumentParser::parseWorkflowsFull(array) called at [<phutil>/src/parser/argument/PhutilArgumentParser.php:333]
#3 PhutilArgumentParser::parseWorkflows(array) called at [<phabricator>/scripts/drydock/drydock_control.php:21]
epriestley@orbital ~/dev/phabricator $ ./bin/drydock command --lease 76287 -- bytes # After patch.
!"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????
```
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D19264
Summary: Ref T13114. See PHI510. Firing Herald on mentioned objects tends to feel arbitrary and can substantially slow down edits which mention many objects.
Test Plan: Mentioned tasks on other tasks; verified that the normal path is hit normally, the new Herald-free path is hit on the mentioned object, and both still work fine and show up in the timeline.
Maniphest Tasks: T13114
Differential Revision: https://secure.phabricator.com/D19263
Summary: Depends on D19259. Ref T13105. Some examples represent image data as `["da", "ta"]` while others represent it as `"data"`. Accept either.
Test Plan: Rendered example notebooks with both kinds of images.
Reviewers: mydeveloperday
Reviewed By: mydeveloperday
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19260
Summary: Ref T13105. Currently, logged-out users can't render documents via the endpoint even if they otherwise have access to the file.
Test Plan: Viewed a file as a logged-out user and re-rendered it via Ajax.
Reviewers: mydeveloperday
Reviewed By: mydeveloperday
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19258
Summary:
Ref T13105. This adds various small client-side improvements to document rendering.
- In the menu, show which renderer is in use.
- Make linking to lines work.
- Make URIs persist information about which rendering engine is in use.
- Improve the UI feedback for transitions between document types.
- Load slower documents asynchronously by default.
- Discard irrelevant requests if you spam the view menu.
Test Plan: Loaded files, linked to lines, swapped between modes, copy/pasted URLs.
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19256
Summary: Depends on D19254. This engine just formats JSON files in a nicer, more readable way.
Test Plan: Looked at some JSON files, saw them become formatted nicely.
Reviewers: mydeveloperday
Reviewed By: mydeveloperday
Differential Revision: https://secure.phabricator.com/D19255
Summary: Ref T13105. Allow normal text files to be rendered as documents, and add a "source code" rendering engine.
Test Plan: Viewed some source code.
Reviewers: mydeveloperday
Reviewed By: mydeveloperday
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19254
Summary:
Depends on D19252. Ref T13105. This very roughly renders Jupyter notebooks.
It's probably better than showing the raw JSON, but not by much.
Test Plan:
- Viewed various notebooks with various cell types, including markdown, code, stdout, stderr, images, HTML, and Javascript.
- HTML and Javascript are not live-fired since they're wildly dangerous.
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19253
Summary:
Depends on D19251. Ref T13105. This adds rendering engine support for PDFs.
It doesn't actually render them, it just renders a link which you can click to view them in a new window. This is much easier than actually rendering them inline and at least 95% as good most of the time (and probably more-than-100%-as-good some of the time).
This makes PDF a viewable MIME type by default and adds a narrow CSP exception for it. See also T13112.
Test Plan:
- Viewed PDFs in Files, got a link to view them in a new tab.
- Clicked the link in Safari, Chrome, and Firefox; got inline PDFs.
- Verified primary CSP is still `object-src 'none'` with `curl ...`.
- Interacted with the vanilla lightbox element to check that it still works.
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19252
Summary:
Ref T13105. Although Markdown is trickier to deal with, we can handle Remarkup easily.
This may need some support for encoding options.
Test Plan: Viewed `.remarkup` files, got remarkup document presentation by default. Viewed other text files, got an option to render as remarkup.
Reviewers: avivey
Reviewed By: avivey
Subscribers: mydeveloperday, avivey
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19251
Summary:
Depends on D19249. Ref T13109. Add timing information to the `PushEvent`:
- `writeWait`: Time spent waiting for a write lock.
- `readWait`: Time spent waiting for a read lock.
- `hostWait`: Roughly, total time spent on the leaf node.
The primary goal here is to see if `readWait` is meaningful in the wild. If it is, that motivates smarter routing, and the value of smarter routing can be demonstrated by looking for a reduction in read wait times.
Test Plan: Pushed some stuff, saw reasonable timing values in the table. Saw timing information in "Export Data".
Maniphest Tasks: T13109
Differential Revision: https://secure.phabricator.com/D19250
Summary:
Depends on D19247. Ref T13109. When we receive an SSH request, generate a random unique ID for the request. Then thread it down through the process tree.
The immediate goal is to let the `ssh-exec` process coordinate with `commit-hook` process and log information about read and write lock wait times. Today, there's no way for `ssh-exec` to interact with the `PushEvent`, but this is the most helpful place to store this data for users.
Test Plan: Made pushes, saw the `PushEvent` table populate with a random request ID. Exported data and saw the ID preserved in the export.
Maniphest Tasks: T13109
Differential Revision: https://secure.phabricator.com/D19249
Summary:
Ref T13109. Make it slightly more clear what the scope of the write and read locks are, and slightly more clear that we're actively acquiring locks, not just sitting around waiting.
While waiting on another writer, show who we're waiting on so you can walk over to their desk and glare at them.
Test Plan:
Added `sleep(15)` after `willWrite()`. Pushed in two windows. Saw new, more informative messages. In the second window, saw the new guidance:
> # Waiting for hector to finish writing (on device "repo1.local.phacility.net" for 11s)...
Reviewers: asherkin
Reviewed By: asherkin
Subscribers: asherkin
Maniphest Tasks: T13109
Differential Revision: https://secure.phabricator.com/D19247
Summary:
See PHI466. Ref T13108. Somewhat recently, new rules were added so that "Resigning" from a revision takes you off the default recipient list, even if you're still a member of a project or package that is still a reviewer or subscriber.
However, these rules don't currently apply to the similar expansion which occurs in notifications. If you resign from a revision you may still get some notifications (just not email) if a package or project you're a member of is a reviewer or subscriber.
(Possibly these should eventually share more code, but just get things working for now.)
Test Plan:
- Created a revision as A.
- Added B as a reviewer.
- Added a package B is an owner for as a reviewer.
- As B, resigned. (Make sure B is also not an explicit subscriber.)
- Commented on the revision as A.
- Before: B is included in the expanded notification recipient list.
- After: B is no longer included in the expanded notification recipient list.
Maniphest Tasks: T13108
Differential Revision: https://secure.phabricator.com/D19244
Summary:
This change prevents the following error when using PHP 7.2:
```
ERROR 2: count(): Parameter must be an array or an object that implements Countable at [/usr/local/lib/php/phabricator/src/applications/differential/xaction/DifferentialRevisionActionTransaction.php:132]
```
A similar issue was fixed in D18964
Test Plan: Tested in a live system.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D19242
Summary:
Depends on D19238. Ref T13105. Give document engines some reasonable automatic support for degrading gracefully when someone tries to hexdump a 100MB file or similar.
Also, make "Video" sort above "Audio" for files which could be rendered either way.
Test Plan: Viewed audio, video, image, and other files. Adjusted limits and saw full, partial, and fallback/error rendering.
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19239
Summary: Depends on D19237. Ref T13105. This adds a (very basic) "Hexdump" engine (mostly just to have a second option to switch to) and a selector for choosing view modes.
Test Plan: Viewed some files, switched between audio/video/image/hexdump.
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19238
Summary:
Ref T13105. This change begins modularizing document rendering. I'm starting in Files since it's the use case with the smallest amount of complexity.
Currently, we hard-coding the inline rendering for images, audio, and video. Instead, use the modular engine pattern to make rendering flexible and extensible.
There aren't any options for switching modes yet and none of the renderers do anything fancy. This API is also probably very unstable.
Test Plan: Viewwed images, audio, video, and other files. Saw reasonable renderings, with "nothing can render this" for any other file type.
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19237
Summary:
DarkConsole could warn when "Analyze Query Plans" was not active.
`msort()` is not stable, so Ferret results with similar relevance could be returned out-of-order.
Test Plan: Saw fewer traces and more-stable result ordering.
Differential Revision: https://secure.phabricator.com/D19236
Summary:
Ref T13108. See PHI364. See the task and issue for discussion.
If a `git fetch` during synchronization hangs, the whole node currently hangs. While the causes of a `git fetch` hang aren't clear, we don't expect synchronization to ever reasonably take more than 15 minutes, so add a default timeout.
Test Plan: Will deploy and observe; this is difficult to reproduce or test directly.
Maniphest Tasks: T13108
Differential Revision: https://secure.phabricator.com/D19235
Summary:
See PHI430. Ref T13102. When the "Build Status" element raises a policy exception, we currently fatal the whole page rather than raising a normal policy error.
This is because the policy check happens very late in page construction, long after we've made the decision to show the page instead of a policy error, and gets treated as a rendering error.
In turn, this is because the rendering is event-based rather than using a more modern Engine + EngineExtension sort of construct, so some of the actual logic runs way later than it should.
Since unwinding all of this isn't trivial and the current behavior is materially bad, limit the damage here for now by just hiding the element. See T13088 for notes on handling this in a more nuanced way in the future.
Test Plan:
- Created a revision visible to "Public".
- Ran a build against it with a build plan visible to "All Users".
- Viewed revision in an incognito window.
- Before patch: Policy fatal with a red "rendering phase" error box.
- After patch: Mostly-functional page with a missing "Build Status" element.
- Viewed revision as a user with a normal session, saw the same UI before and after the change.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13102
Differential Revision: https://secure.phabricator.com/D19232
Summary:
Ref T13102. See PHI461. An install is interested in querying projects by slug.
I think I omitted this capability originally only because we're not consistent about what slugs are called (they are "Slugs" internally, but "Hashtags" in the UI).
However, this ship has sort of already sailed because the results have a "slug" field. Just expose this as "slugs" for consistency with the existing API field and try to smooth thing over with a little documentation hint.
Test Plan: Queried for projects by slug, got the desired results back.
Maniphest Tasks: T13102
Differential Revision: https://secure.phabricator.com/D19230
Summary: Ref T13106. When profiling service queries, there's no convenient way to easily get a sense of why a query was issued. Add a mode to collect traces for each query to make this more clear. This is rough, but works well enough to be useful.
Test Plan: Clicked "Analyze Query Plans", got stack traces for each service call.
Maniphest Tasks: T13106
Differential Revision: https://secure.phabricator.com/D19221
Summary:
See PHI457. There's no real reason not to allow this, it just wasn't clear if it was useful. See D18626.
An install had a user `arc diff` and then sprint out the door to take a very long vacation before the builds finished. One failed, so the revision is stuck as a draft forever. This seems like a reasonable motivation for allowing "Commandeer".
Test Plan: Successfully commandeered a draft.
Differential Revision: https://secure.phabricator.com/D19228
Summary: See PHI448. Ref T13106. The current implementation here can end up in an infinite stack if, e.g., a project uses "Visible to: Subscribers".
Test Plan: Will push.
Maniphest Tasks: T13106
Differential Revision: https://secure.phabricator.com/D19226
Summary: Depends on D19224. Ref T13106. Computing this is expensive and the value is not used. This came from D15432, but we never actually shipped that feature.
Test Plan: Saw local query cost drop from 139 to 110 with no change in functionality. Grepped for removed symbols.
Maniphest Tasks: T13106
Differential Revision: https://secure.phabricator.com/D19225
Summary:
Depends on D19223. Ref T13106. When we're loading a file, we currently test if it's a transformed version of another file (usually, a thumbnail) and apply policy behavior if it is.
We know that builtins and profile images are never transforms and that the policy behavior for these files doesn't matter anyway. Skip loading transforms for these files.
Test Plan: Saw local queries drop from 146 to 139 with no change in behavior.
Maniphest Tasks: T13106
Differential Revision: https://secure.phabricator.com/D19224
Summary:
Depends on D19222. Ref T13106. We currently execute an edge query (and possibly an object query) when loading builtin files, but this is never necessary because we know these files are always visible.
Instead, skip this logic for builtin files and profile image files; these files have global visibility and will never get a different policy result because of file attachment information.
(In theory, we could additionally skip this for files with the most open visibility policy or some other trivially visible policy like the user's PHID, but we do actually care about the attachment data some of the time.)
Test Plan: Saw queries drop from 151 to 145 on local test page. Checked file attachment data in Files, saw it still working correctly.
Maniphest Tasks: T13106
Differential Revision: https://secure.phabricator.com/D19223
Summary: Depends on D19221. Ref T13106. When we fall back to default profile images for projects, bulk load them instead of doing individual queries.
Test Plan: Saw local task drop from 199 queries to 151 queries with the same actual outcome. Saw custom and default profile images on the project list page.
Maniphest Tasks: T13106
Differential Revision: https://secure.phabricator.com/D19222
Summary:
See PHI451. Ref T13102. DarkConsole uses an ancient inline "onclick" handler to expand the stack traces for errors.
The new Content-Security-Policy prevents this from functioning.
Replace this with a more modern behavior-driven action instead.
Test Plan:
- Clicked some errors in DarkConsole, saw stack traces appear.
- Grepped for `onclick` and `jsprintf()` to see if I could find any more of these, but came up empty.
Maniphest Tasks: T13102
Differential Revision: https://secure.phabricator.com/D19218
Summary:
See PHI446. Ref T13088. Currently, there's no way to access older generations of a build unless you know the secret `?g=1` URI magic.
When a build has multiple generations, show a history table and let users click to see older run information.
This is currently very basic. It would be nice to show when each generation started, who started/restarted it, and what the build status was at the time the build was restarted. There's currently no convenient source for this information so just add a bare-bones, working version of this for now.
Test Plan:
Viewed pending, single-run and multi-restart builds. Saw table on builds with more than one generation. Clicked table entries to see different build data.
{F5471160}
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19217
Summary:
Fixes T12994. We need `MYSQLI_ASYNC` to implement client-side query timeouts, and we need MySQLi + MySQL Native Driver to get `MYSQLI_ASYNC`.
Recommend users install MySQLi and MySQL Native Driver if they don't have them. These are generally the defaults and best practice anyway, but Ubuntu makes it easy to use the older stuff.
All the cases we're currently aware of stem from `apt-get install php5-mysql` (which explicitly selects the non-native driver) so issue particular guidance about `php5-mysqlnd`.
Test Plan:
- Faked both issues locally, reviewed the text.
- Will deploy to `secure`, which currently has the non-native driver.
Maniphest Tasks: T12994
Differential Revision: https://secure.phabricator.com/D19216
Summary:
Ref T13102. An install has a custom rule for bridging JIRA references via Doorkeeper and would like to be able to render them as `JIRA-123` instead of `JIRA JIRA-123 Full JIRA title`.
I think it's reasonable to imagine future support upstream for `JIRA-123`, `{JIRA-123}`, and so on, although we do not support these today. We can take a small step toward eventual support by letting the rendering pipeline understand different view modes.
This adds an optional `name` (the default text rendered before we do the OAuth sync) and an optional `view`, which can be `short` or `full`.
Test Plan:
I tested this primarily with Asana, since it's less of a pain to set up than JIRA. The logic should be similar, hopefully.
I changed `DoorkeeperAsanaRemarkupRule` to specify `name` and `view`, e.g `'view' => (mt_rand(0, 1) ? 'short' : 'full')`. Then I made a bunch of Asana references in a comment and saw them randomly go short or long.
Maniphest Tasks: T13102
Differential Revision: https://secure.phabricator.com/D19215
Summary:
Fixes T5741. We break GIFs apart with "-coalesce" which completely rasterizes each frame, but stitch them back together without specifying "-dispose".
This produces the default "-dispose none" behavior, which causes GIF frames to "pile up" if they contain transparency.
Instead, use "-dispose background" so that the previous frame is erased before each new frame is drawn.
Test Plan: See T5741 for additional details.
Maniphest Tasks: T5741
Differential Revision: https://secure.phabricator.com/D19214
Summary:
Fixes T13104. The "Subscribers" policy implementation still uses older logic to query project membership and misses parent projects and milestones which a user is a member of.
Instead of doing an edge query for explicit membership, use a project query to find all projects the viewer belongs to.
Test Plan:
- Created a parent project A.
- Created a subproject B.
- As Bailey, created a task with "Visible To: Bailey, Subscribers".
- Added parent project A as a task subscriber.
Then:
- As Alice, verified I could not see the task.
- As Alice, joined subproject B.
- Before patch: still unable to see the task.
- After patch: can see the task.
- Removed parent project A as a subscriber, verified I could no longer see the task.
Maniphest Tasks: T13104
Differential Revision: https://secure.phabricator.com/D19213
Summary:
See PHI431. Ref T13102. An install is interested in a custom "non-sticky" accept action, roughly.
On the one hand, this is a pretty hacky patch. However, I suspect it inches us closer to T731, and I'm generally comfortable with exploring the realms of "Accept Next Update", "Unblock Without Accepting", etc., as long as most of it doesn't end up enabled by default in the upstream.
Test Plan:
- Accepted and updated revisions normally, saw accepts respect global stickiness.
- Modified the "Accept" action to explicitly be unsticky, saw nonsticky accept behavior after update.
Maniphest Tasks: T13102
Differential Revision: https://secure.phabricator.com/D19211
Summary: See PHI433. Ref T13102. Users in the wild have mixed expecations about exactly what "draft" means. Recent changes have tried to make behavior more clear. As part of clarifying messaging, make it explicit that `@mention` does not work on drafts by showing users a warning when they try to `@mention` a user.
Test Plan:
- Mentioned users on drafts, got a warning.
- Posted normal comments on drafts, no warning.
- Posted normal/mention comments on non-drafts, no warning.
Maniphest Tasks: T13102
Differential Revision: https://secure.phabricator.com/D19210
Summary: Ref T13103. Make favicons customizable, and perform dynamic compositing to add marker to indicate things like "unread messages".
Test Plan: Viewed favicons in Safari, Firefox and Chrome. With unread messages, saw pink dot composited into icon.
Maniphest Tasks: T13103
Differential Revision: https://secure.phabricator.com/D19209
Summary: See PHI439. Use slightly richer "dominion" return values for consistency.
Test Plan: Fetched results with `owners.search` API method.
Differential Revision: https://secure.phabricator.com/D19208
Summary:
See PHI439. This fills in additional information about Owners packages.
Also removes dead `primaryOwnerPHID`.
Test Plan: Called `owners.search` and reviewed the results. Grepped for `primaryOwnerPHID`.
Differential Revision: https://secure.phabricator.com/D19207
Summary: See PHI433. This beefs up reminder texts for drafts a little bit since some users in the wild aren't always seeing/remembering the existing, fairly subtle hints.
Test Plan: Created a reivsion with `--draft`, viewed it, saw richer reminders.
Differential Revision: https://secure.phabricator.com/D19204
Summary:
Depends on D19201. Ref T13101. This likely produces relatively stable-ish image references for email.
They currently TTL after 30 days but this makes the jokes more exclusive and special so it's a feature, not a bug.
Test Plan: I'm just going to test this in production because I'm a ninja superstar developer.
Maniphest Tasks: T13101
Differential Revision: https://secure.phabricator.com/D19203
Summary:
Depends on D19198. Ref T13101. Ref T5258. Pull compositing logic out of the `Controller`.
This is moving toward fixing memes in email.
Test Plan: Used new and old memes. Used API memes.
Maniphest Tasks: T13101, T5258
Differential Revision: https://secure.phabricator.com/D19200
Summary: See PHI432. Ref T13099. Short names never made it to the UI/API but seem stable now, so support them.
Test Plan: {F5465173}
Maniphest Tasks: T13099
Differential Revision: https://secure.phabricator.com/D19202
Summary:
Ref T13101. This is a minimal change to make "{meme ...}" work with the new Content-Security-Policy by using an Ajax request to generate the image and then swapping the source on the client.
This could be much cleaner (see T5258, etc).
Test Plan: Used `{meme, src=cat6, above=i am, below=cat}`, chuckled completely unironically.
Maniphest Tasks: T13101
Differential Revision: https://secure.phabricator.com/D19196
Summary: Depends on D19194. Fixes T4190. This should be in good-enough shape now to release and support more generally.
Test Plan: Used `{image ...}` in remarkup.
Maniphest Tasks: T4190
Differential Revision: https://secure.phabricator.com/D19195
Summary: Depends on D19193. Ref T13101. Fixes T4190. Before we render a fancy AJAX placeholder, check if we already have a valid cache for the image. If we do, render a direct `<img />` tag. This is a little cleaner and, e.g., avoids flicker in Safari, at least.
Test Plan: Rendered `{image ...}` rules in remarkup with new and existing URIs.
Maniphest Tasks: T13101, T4190
Differential Revision: https://secure.phabricator.com/D19194
Summary:
Depends on D19192. Ref T4190. Ref T13101. Instead of directly including the proxy endpoint with `<img src="..." />`, emit a placeholder and use AJAX to make the request. If the proxy fetch fails, replace the placeholder with an error message.
This isn't the most polished implementation imaginable, but it's much less mysterious about errors.
Test Plan: Used `{image ...}` for valid and invalid images, got images and useful error messages respectively.
Maniphest Tasks: T13101, T4190
Differential Revision: https://secure.phabricator.com/D19193
Summary:
Ref T13101. Ref T4190. This rule is currently single-phase but I'd like to check for a valid proxied image in cache already and just emit an `<img ... />` tag pointing at it if we have one.
To support batching these lookups, split the rule into a parse phase (where we extract URIs) and a markup phase (where we build tags).
Test Plan: Used `{img ...}` in Remarkup with no apparent behavioral changes. (This change should do nothing on its own.)
Maniphest Tasks: T13101, T4190
Differential Revision: https://secure.phabricator.com/D19192
Summary: Depends on D19190. Fixes T12590. Ref T13099. Replaces the barely-usable, gigantic, poorly ordered "<select />" control with a tokenizer. Attempts to fix various minor issues.
Test Plan:
- Edited paths: include/exclude paths, from different repositories, different actual paths.
- Used "Add New Path" to add rows, got repository selector prepopulated with last value.
- Used "remove".
- Used validation typeahead, got reasonable behaviors?
The error behavior if you delete the repository for a path is a little sketchy still, but roughly okay.
Maniphest Tasks: T13099, T12590
Differential Revision: https://secure.phabricator.com/D19191
Summary:
Depends on D19189. Ref T12590. The "validate" and "complete" endpoints for this UI could incorrectly return redirect responses. These aren't critical to the behavior of Owners, but they're nice to have, and shouldn't redirect.
Instead, skip the canonicalizing redirect for AJAX requests.
Test Plan: Edited Owners paths in a repository with a short name, got completion/validation again.
Maniphest Tasks: T12590
Differential Revision: https://secure.phabricator.com/D19190
Summary: Ref T12590. This is ancient code which was used to prefill `/trunk/tfb/www/` or similar at Facebook. I don't think it ever had a UI and no install has asked for this feature since 2011.
Test Plan: Grepped for affected symbols, edited paths in Owners.
Maniphest Tasks: T12590
Differential Revision: https://secure.phabricator.com/D19189
Summary: See PHI425. See T12678. This should be an integer, but may be a string.
Test Plan: Called `differential.revision.edit`, observed integer in result instead of string.
Differential Revision: https://secure.phabricator.com/D19186
Summary: Depends on D19184. Ref T11015. Now that we have a digest index column, we can improve some of the queries a bit.
Test Plan:
- Ran queries from revision pages before and after with and without EXPLAIN.
- Saw the same results with much better EXPLAIN plans.
- Fragment size is now fixed at 12 bytes per fragment, so we can shove more of them in a single query.
Maniphest Tasks: T11015
Differential Revision: https://secure.phabricator.com/D19185
Summary:
Depends on D19183. Ref T11015. Currently, adding a trailing slash works great and omitting it mysteriously doesn't work.
Store a normalized version with an unconditional trailing slash for the lookup logic to operate on, and a separate display version which tracks what the user actually typed.
Test Plan:
- Entered "/src/main.c", "/src/main.c/", saw them de-duplicate.
- Entered "/src/main.c", saw it stay that way in the UI but appear as "/src/main.c/" internally.
- Added a rule for "/src/applications/owners" (no slash), created a revision touching paths in that directory, saw Owners fire for it.
- Changed the display value of a path only ("/src/main.c" to "/src/main.c/"), saw the update reflected in the UI without any beahvioral change.
Maniphest Tasks: T11015
Differential Revision: https://secure.phabricator.com/D19184
Summary:
Depends on D19182. Ref T11015. This changes `path` from `text255` to `longtext` because paths may be arbitrarily long.
It adds `pathDisplay` to prepare for display paths and storage paths having different values. For now, `pathDisplay` is copied from `path` and always has the same value.
Test Plan:
- Ran migration, checked database for sanity (all `pathDisplay` and `path` values identical).
- Added new paths, saw `pathDisplay` and `path` get the same values.
- Added an unreasonably enormous path with far more than 255 characters.
Maniphest Tasks: T11015
Differential Revision: https://secure.phabricator.com/D19183
Summary:
Depends on D19181. Ref T11015. This nukes duplicates from the table if they exist, then adds a unique key.
(Duplicates should not exist and can not be added with any recent version of the web UI.)
Test Plan:
- Tried to add duplicates with web UI, didn't have any luck.
- Explicitly added duplicates with manual `INSERT`s.
- Viewed packages in web UI and saw duplicates.
- Ran migrations, got a clean purge and a nice unique key.
- There's still no way to actually hit a duplicate key error in the UI (unless you can collide hashes, I suppose), this is purely a correctness/robustness change.
Maniphest Tasks: T11015
Differential Revision: https://secure.phabricator.com/D19182
Summary: Ref T11015. This supports making path names arbitrarily long and putting a proper unique key on the table.
Test Plan:
- Migrated, checked database, saw nice digested indexes.
- Edited a package, saw new rows update with digested indexes.
Maniphest Tasks: T11015
Differential Revision: https://secure.phabricator.com/D19181
Summary: Ref T13099. See PHI424. Fixes T11664. Several installs are interested in having these behaviors available in Owners by default and they aren't difficult to provide, it just makes the UI kind of messy. But I think there's enough general interest to justify it, now.
Test Plan: Created a package which owns "/" with a "With Non-Owner Author" review rule which I own. Created a revision, no package reviewer. Changed rule to "All", updated revision, got package reviewer.
Maniphest Tasks: T13099, T11664
Differential Revision: https://secure.phabricator.com/D19180
Summary:
Ref T13099. Ref T12787. See PHI417. Differential has new "irresponsible" warnings in the timeline somewhat recently, but these publish feed stories that don't link to the revision or have other relevant details, so they're confusing on the balance.
These have a high strength so they render on top, but we actually just want to hide them from the feed and let "abraham closed Dxyz by committing rXzzz." be the primary story.
Modularize things more so that we can get this behavior. Also, respect `shouldHideForFeed()` at display time, not just publishing time.
Test Plan: Used `bin/differential attach-commit` on a non-accepted revision to "irresponsibly land" a revision. Verified that feed story now shows "closed by commit" instead of "closed irresponsibly".
Maniphest Tasks: T13099, T12787
Differential Revision: https://secure.phabricator.com/D19179
Summary: Ref T13100. Since rules may begin failing for PRCE configuration reasons soon, provide a more complete explanation of possible causes in the UI.
Test Plan: Faked this, hit it via test console, saw explanation in web UI.
Maniphest Tasks: T13100
Differential Revision: https://secure.phabricator.com/D19178
Summary:
Ref T13099. See that task for discussion. Chrome is unhappy with an MFA form submitting to an endpoint which redirects you to an OAuth URI.
Instead, do the redirect entirely on the client.
Chrome's rationale here isn't obvious, so we may be able to revert this at some point.
Test Plan: Went through the OAuth flow locally, was redirected on the client. Will verify in production.
Maniphest Tasks: T13099
Differential Revision: https://secure.phabricator.com/D19177
Summary: Depends on D19175. Ref T13099. This fills in "close" and "update" transactions so that they show which commit(s) caused the action.
Test Plan: Used `transaction.search` to query some revisions, saw commit PHID information.
Maniphest Tasks: T13099
Differential Revision: https://secure.phabricator.com/D19176
Summary: Ref T13099. Move most of the "Update" logic to modular transactions
Test Plan: Created and updated revisions. Flushed the task queue. Grepped for `TYPE_UPDATE`. Reviewed update transactions in the timeline and feed.
Maniphest Tasks: T13099
Differential Revision: https://secure.phabricator.com/D19175
Summary: Depends on D19173. Ref T13096. Adds an optional, disabled-by-default lock log to make it easier to figure out what is acquiring and holding locks.
Test Plan: Ran `bin/lock log --enable`, `--disable`, `--name`, etc. Saw sensible-looking output with log enabled and daemons restarted. Saw no additional output with log disabled and daemons restarted.
Maniphest Tasks: T13096
Differential Revision: https://secure.phabricator.com/D19174
Summary:
Ref T13096. Currently, we do a fair amount of clever digesting and string manipulation to build lock names which are less than 64 characters long while still being reasonably readable.
Instead, do more of this automatically. This will let lock acquisition become simpler and make it more possible to build a useful lock log.
Test Plan: Ran `bin/repository update`, saw a reasonable lock acquire and release.
Maniphest Tasks: T13096
Differential Revision: https://secure.phabricator.com/D19173
Summary:
See PHI416. If you raise a lint message in a deleted file, we don't render any text on the right hand side so the message never displays.
This is occasionally still legitimate/useful, e.g. to display a "don't delete this file" message. At least for now, show these messages on the left.
Test Plan: Posted a lint message on a deleted file via `harbormaster.sendmessage`, viewed revision, saw file expand with synthetic inline for lint.
Differential Revision: https://secure.phabricator.com/D19171
Summary: See PHI193. Previously, see similar D18763. Skip this legacy-style policy check when creating a project, since we know you can add members, even if the policy doesn't actually resolve in your favor.
Test Plan:
- Created a project with edit policy "Members of project" and myself, plus any other user (so the code goes down this path, not the "join/leave" path) as members.
Differential Revision: https://secure.phabricator.com/D19169
Summary:
See PHI413. You can pre-generate these with `bin/people profileimage --all`, but they're needlessly expensive to generate.
Streamline the workflow and cache some of the cacheable parts to reduce the generation cost.
Test Plan:
- Ran `bin/people profileimage --all` and saw cost drop from {nav 15.801s > 4.839s}.
- Set `defaultProfileImagePHID` to `NULL` in `phabricator_user.user` and purged caches with `bin/cache purge --all`.
- Loaded user directory.
- Saw default images regenerate relatively quickly.
Differential Revision: https://secure.phabricator.com/D19168
Summary:
Depends on D19166. Ref T13088. When the user scrolls away from a followed log, break the focus lock.
Let users stop following a live log.
Show when lines are added more clearly.
Don't refresh quite as quickly give users a better shot at clicking the stop button.
These behaviors can probably be refined but are at least more plausible and less actively user-hostile than the first version of this behavior was.
Test Plan: Used `write-log --rate` to write a large log slowly. Clicked "Follow Log", followed for a bit. Scrolled away, still got live updates but no more scroll lock. Clicked stop, no more updates.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19167
Summary:
Depends on D19165. Ref T13088. Currently, in other applications, we use Zero Width Spaces and Javascript "copy" listeners to prevent line numbers from being copied. This isn't terribly elegant.
Modern browsers support a second approach: using psuedo-elements with `content`. Try this in Harbormaster since it's conceptually cleaner, at least. One immediate drawback is that Command-F can't find this text either.
Test Plan: In Safari, Chrome and Firefox, highlighted ranges of lines and copy/pasted text. Got just text (no line numbers) in all cases.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19166
Summary: Depends on D19164. Ref T13088. Now that the JS behaviors are generic, use them on the Harbormaster standalone page.
Test Plan: Clicked lines and dragged across line ranges. Reloaded pages. Saw expected highlighting behavior in the client and on the server across reloads.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19165
Summary:
Depends on D19162. Ref T13088. When a user links to `$1234`, we need to render a default view of the log with a piece at the head, a piece at the end, and a piece in the middle.
We also need to figure out the offset for line 1234, or multiple offsets for "1234-2345".
Since the logic views/reads mostly anticipated this it isn't too much of a mess, although there are a couple of bugs this exposes with view specifications that use combinations of parameters which were previously impossible.
Test Plan: Viewed a large log with no line marker. Viewed `$1`. Viewed `$end`. Viewed `$35-40`, etc. Expanded context around logs.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19163
Summary: Ref T13088. This lifts the code for parsing "$x-y" line ranges in URIs into AphrontRequest so Diffusion, Paste, Harbormaster, etc., can share it.
Test Plan: Viewed lines, line ranges, no lines, negative line ranges, line ranges with 0, and extremely long line ranges in Paste.
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19162
Summary:
Ref T4340. Some "Register/Login" and "Link External Account" buttons are forms which submit to third-party sites. Whitelist these targets when pages render an OAuth form.
Safari, at least, also prevents a redirect to a third-party domain after a form submission to the local domain, so when we first redirect locally (as with Twitter and other OAuth1 providers) we need to authorize an additional URI.
Test Plan: Clicked all my registration buttons locally without hitting CSP issues.
Maniphest Tasks: T4340
Differential Revision: https://secure.phabricator.com/D19159
Summary:
Depends on D19155. Ref T13094. Ref T4340.
We can't currently implement a strict `form-action 'self'` content security policy because some file downloads rely on a `<form />` which sometimes POSTs to the CDN domain.
Broadly, stop generating these forms. We just redirect instead, and show an interstitial confirm dialog if no CDN domain is configured. This makes the UX for installs with no CDN domain a little worse and the UX for everyone else better.
Then, implement the stricter Content-Security-Policy.
This also removes extra confirm dialogs for downloading Harbormaster build logs and data exports.
Test Plan:
- Went through the plain data export, data export with bulk jobs, ssh key generation, calendar ICS download, Diffusion data, Paste data, Harbormaster log data, and normal file data download workflows with a CDN domain.
- Went through all those workflows again without a CDN domain.
- Grepped for affected symbols (`getCDNURI()`, `getDownloadURI()`).
- Added an evil form to a page, tried to submit it, was rejected.
- Went through the ReCaptcha and Stripe flows again to see if they're submitting any forms.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13094, T4340
Differential Revision: https://secure.phabricator.com/D19156
Summary:
Depends on D19154. Ref T13094. This controller was removed at some point and this route no longer works.
I plan to add a new `download/` route to let us tighten the `form-action` Content Security Policy.
Test Plan: Grepped for the route and controller, no hits.
Maniphest Tasks: T13094
Differential Revision: https://secure.phabricator.com/D19155
Summary: Depends on D19152. Ref T13088. This adds live log tailing. It is probably not the final version of this feature because it prevents escape once you begin tailing a log.
Test Plan: Used `bin/harbormaster write-log --rate ...` to write a log slowly. Viewed it in the web UI. Clicked "Follow Log". Followed the log until the write finished, a lifetime later.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19153
Summary: Depends on D19151. Ref T13088. While dramatically less exciting than using `lolcat` and less general than `pv`, this should do the job adequately.
Test Plan: Piped a sizable log into `bin/harbormaster write-log` with `--rate 2048`, saw a progress bar. Loaded the log in the web UI and saw it grow as the page reloaded.
Reviewers: yelirekim
Reviewed By: yelirekim
Subscribers: yelirekim, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19152
Summary:
Depends on D19150. Ref T13088. Allow clients to retrieve information about build logs, including log data, over the API.
(To fetch log data, take the `filePHID` to `file.search`, then issue a normal GET against the URI. Use a `Content-Range` header to get part of the log.)
Test Plan: Ran `harbormaster.log.search`, got sensible-looking results.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19151
Summary: Depends on D19149. Ref T13088. Since the new log requires a bunch of log reprocessing, the cutover is going to require at least some time for installs to run migrations. Add a link in the UI to ease the transition, smooth over some behaviors a little, and fix a fetch issue where we'd request past the end of the log (since this is now enforced).
Test Plan: Viewed a traditional Harbormaster build, saw links to the new standalone log pages.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19150
Summary: Depends on D19148. Ref T13088. The new rendering always executes range requests for data it needs, and we can satisfy these requests by loading the smallest number of chunks which span that range.
Test Plan: Piped 50,000 lines of Apache log into Harbormaster, viewed it in the new UI, got sensible rendering times and a reasonable amount of data actually going over the wire.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19149
Summary: Ref T13088. This variable bled through from an earlier loop and caused us to drop some of the lines in the middle.
Test Plan: Clicked "Show More", got an equal number of header and footer lines.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19148
Summary: Ref T13093. Depends on D19145. See PHI398. Previously, see D18933. This provides the current viewer to `ConduitCall` so that we don't try to use device credentials from unprivileged web hosts.
Test Plan: Evaluated the "Branches" field locally, saw an appropriate field value.
Maniphest Tasks: T13093
Differential Revision: https://secure.phabricator.com/D19146
Summary:
Ref T13093. See PHI396. These are possibly somewhat niche, but reasonable to support and consistent with the existing "Pusher's projects".
Also relabel "Pusher's projects" and "Project tags" for consistency and, hopefully, clarity.
Test Plan:
- Created new "commit" and "hook: commit content" Herald rules which run against "Author's projects" and "Committer's projects".
- Test console'd the "Commit" rules.
- Pushed through the "Hook" rule.
- In all cases, saw fields populate appropriately.
Maniphest Tasks: T13093
Differential Revision: https://secure.phabricator.com/D19145
Summary:
See PHI399. Ref T4340. This header provides an additional layer of protection against various attacks, including XSS attacks which embed inline `<script ...>` or `onhover="..."` content into the document.
**style-src**: The "unsafe-inline" directive affects both `style="..."` and `<style>`. We use a lot of `style="..."`, some very legitimately, so we can't realistically get away from this any time soon. We only use one `<style>` (for monospaced font preferences) but can't disable `<style>` without disabling `style="..."`.
**img-src**: We use "data:" URIs to inline small images into CSS, and there's a significant performance benefit from doing this. There doesn't seem to be a way to allow "data" URIs in CSS without allowing them in the document itself.
**script-src** and **frame-src**: For a small number of flows (Recaptcha, Stripe) we embed external javascript, some of which embeds child elements (or additional resources) into the document. We now whitelist these narrowly on the respective pages.
This won't work with Quicksand, so I've blacklisted it for now.
**connect-src**: We need to include `'self'` for AJAX to work, and any websocket URIs.
**Clickjacking**: We now have three layers of protection:
- X-Frame-Options: works in older browsers.
- `frame-ancestors 'none'`: does the same thing.
- Explicit framebust in JX.Stratcom after initialization: works in ancient IE.
We could probably drop the explicit framebust but it wasn't difficult to retain.
**script tags**: We previously used an inline `<script>` tag to start Javelin. I've moved this to `<data data-javelin-init ...>` tags, which seems to work properly.
**`__DEV__`**: We previously used an inline `<script>` tag to set the `__DEV__` mode flag. I tried using the "initialization" tags for this, but they fire too late. I moved it to `<html data-developer-mode="1">`, which seems OK everywhere.
**CSP Scope**: Only the CSP header on the original request appears to matter -- you can't refine the scope by emitting headers on CSS/JS. To reduce confusion, I disabled the headers on those response types. More headers could be disabled, although we're likely already deep in the land of diminishing returns.
**Initialization**: The initialization sequence has changed slightly. Previously, we waited for the <script> in bottom of the document to evaluate. Now, we go fishing for tags when domcontentready fires.
Test Plan:
- Browsed around in Firefox, Safari and Chrome looking for console warnings. Interacted with various Javascript behaviors. Enabled Quicksand.
- Disabled all the framebusting, launched a clickjacking attack, verified that each layer of protection is individually effective.
- Verified that the XHProf iframe in Darkconsole and the PHPAST frame layout work properly.
- Enabled notifications, verified no complaints about connecting to Aphlict.
- Hit `__DEV__` mode warnings based on the new data attribute.
- Tried to do sketchy stuff with `data:` URIs and SVGs. This works but doesn't seem to be able to do anything dangerous.
- Went through the Stripe and Recaptcha workflows.
- Dumped and examined the CSP headers with `curl`, etc.
- Added a raw <script> tag to a page (as though I'd found an XSS attack), verified it was no longer executed.
Maniphest Tasks: T4340
Differential Revision: https://secure.phabricator.com/D19143
Summary:
Depends on D19141. Ref T13088. Some of the fundamental log behaviors like "loading the correct rows" are now a bit better behaved.
The UI is a little less garbage, too.
Test Plan: Viewed some logs and loaded more context by clicking the buttons.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19142
Summary: Depends on D19139. Ref T13088. This doesn't actually work, but is close enough that a skilled attacker might be able to briefly deceive a small child.
Test Plan:
- Viewed some very small logs under very controlled conditions, saw content.
- Larger logs vaguely do something resembling working correctly.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19141
Summary:
Depends on D19138. Ref T13088. When we want to read the last part of a logfile //and show accurate line numbers//, we need to be able to get from byte offsets to line numbers somehow.
Our fundamental unit must remain byte offsets, because a test can emit an arbitrarily long line, and we should accommodate it cleanly if a test emits 2GB of the letter "A".
To support going from byte offsets to line numbers, compute a map with periodic line markers throughout the offsets of the file. From here, we can figure out the line numbers for arbitrary positions in the file with only a constant amount of work.
Test Plan: Added unit tests; ran unit tests.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19139
Summary: Depends on D19137. Ref T13088. This allows `rebuild-log` to skip work if the chunks are already compressed. It also prepares for a future GC which is looking for "text" or "gzip" chunks to throw away in favor of archival into Files; such a GC can use this column to find collectable logs and then write "file" to it, meaning "chunks are gone, this data is only available in Files".
Test Plan: Ran migration, saw logs populate as "text". Ran `rebuild-log`, saw logs rebuild as "gzip".
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19138
Summary: Depends on D19136. Ref T13088. Since it's probably impractical to do all the migrations these changes imply during `bin/storage upgrade`, provide some support for performing them online.
Test Plan: Ran `bin/harbormaster rebuild-log` with `--all`, `--id`, and with and without `--force`.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19137
Summary: Depends on D19135. Ref T13088. Denormalize the total log size onto the log itself. This makes reasoning about the log at display time easier, and we don't need to fish around in the database as much to figure out what we're dealing with.
Test Plan: Ran `bin/harbormaster rebuild-log`, saw an existing log populate. Ran `bin/harbormaster write-log`, saw new log write with proper length information.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19136
Summary:
Depends on D19134. Ref T13088. Future changes will support API writers, so push the log lock into the Log object.
Allow open/close ("this process is writing to this log") to be separate from live/final ("this log is still generating more data").
Test Plan: Wrote logs with `bin/harbormater write-log` and updated logs with `bin/harbormaster rebuild-log`.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19135
Summary: Depends on D19133. Ref T13088. Allows build logs to be formally destroyed, cleaning up their chunks and file data.
Test Plan:
- Used `bin/remove destroy` to destroy a log, verified chunks and files were removed.
- Used `bin/harbormaster rebuild-log` to force a log to rebuild, verified files were destroyed and regenerated.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19134
Summary: Depends on D19132. Ref T13088. This implements an extremely skeletal dedicated log page with a more-or-less functional "Download Log" button.
Test Plan: Downloaded a recent log. Tried to download an old (un-finalized) log, couldn't. Used `bin/harbormaster write-log` to get a convenient standalone link to a log.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19133
Summary: Depends on D19131. Ref T13088. During log finalization, stream the log into Files to support "Download Log", archive to Files, and API access.
Test Plan: Ran `write-log` and `rebuild-log`, saw Files objects generate with log content and appropriate permissions.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19132
Summary: Depends on D19130. Ref T13088. Currently, when a build log is closed we compress it in the same process. Separate this out into a dedicated worker since the plan is to do a lot more work during finalization, none of which needs to happen inline during builds (or, particuarly, inline during a Conduit call for API writes in the future).
Test Plan: Ran `bin/harbormaster write-log --trace`, saw compression run inline.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19131
Summary: Ref T13088. This is currently minimal but the modify-execute development loop on build logs is extremely long without it.
Test Plan: Ran `echo hi | ./bin/harbormaster write-log --target 12345`, saw the log show up in the web UI.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19130
Summary:
Ref T13090. The default width changed recently to become much wider, but the behavior on this control isn't great. Instead:
- Pick a default width somewhere between the two.
- Make the width sticky across show/hide (pressing "f" twice remembers your width instead of resetting it).
- Make the width sticky across reloads (dragging the bar, then reloading the page keeps the bar in the same place).
Test Plan:
- Without settings, loaded page: got medium-width bar.
- Dragged bar wide/narrow, toggled on/off with "f", got persistent width.
- Dragged bar wide/narrow, reloaded page, got persistent width.
- Dragged bar wide/narrow, toggled it off, reloaded page, toggled it on, got persistent width.
Maniphest Tasks: T13090
Differential Revision: https://secure.phabricator.com/D19129
Summary: Ref T13090. The doc string in "any()" wasn't specified correctly and the help page wasn't getting enough supporting data to build properly.
Test Plan: Viewed "Reference: Advanced Functions" for a custom datasource field and got more helpful help.
Maniphest Tasks: T13090
Differential Revision: https://secure.phabricator.com/D19128
Summary: Depends on D19126. Ref T13090. For datasource custom fields, this proxies the datasource and provides "none()" and "any()" functions to allow you to search for objects with no values or any values.
Test Plan:
- Created a custom "Owning Group" field in Maniphest using a Projects datasource.
- For a task with no owner assigned, searched for "none()" (hit) and "any()" (miss).
- Assigned the task to an owning project.
- Searched for "none()" (miss), "any()" (hit), the project it is now a member of (hit) and some random other project (miss).
Maniphest Tasks: T13090
Differential Revision: https://secure.phabricator.com/D19127
Summary: Ref T13090. Ref T13077. This adds `parentPaths` and `ancestorPaths` constraints to `phriction.document.query`. These should be a little more usable than the internal `slugPrefix` / `depth` stuff -- that's technically more powerful, but requires callers to know more slug normalization rules. We could perhaps expose `minDepth` / `maxDepth` in the future.
Test Plan: Ran valid and invalid `parentPaths` and `ancestorPaths` queries for `/`, `aaa/`, `AAA/`, etc. Got sensible-seeming results.
Maniphest Tasks: T13090, T13077
Differential Revision: https://secure.phabricator.com/D19125
Summary:
Fixes T13087. Ref T13090. An install ran into a situation where mail was being double-delivered, and it wasn't immediately clear where in the pipeline the issue lay.
This change adds some headers which should rule out (or, at least, render very unlikely) some possible causes if we encounter similar issues in the future.
The `X-Phabricator-Mail-ID` header stores the ID of the `MetaMTAMail` storage object so we can distinguish between two messages sent to two different targets and one message which may have been split or re-sent. It also makes it easier to know what to `bin/mail show-outbound --id <id>` and where to find the message in the web UI for additional information.
The `X-Phabricator-Send-Attempt` is a unique value per attempt. If two mail messages are delivered with the same attempt value, the split is probably downstream from Phabricator. If they have different attempt values, the split is probably in Phabricator.
(In this case, the split was somewhere downstream from us, since sending mail with `/usr/bin/mail` also resulted in duplicates.)
Test Plan: Send some mail, inspected it with `bin/mail show-outbound --id <id>`, saw new headers with sensible/expected values.
Maniphest Tasks: T13090, T13087
Differential Revision: https://secure.phabricator.com/D19124
Summary:
See PHI385. Ref T13054. Ref T13083. The dashboard "arrange" operations (add, remove, move) rely on doing `$dashboard->setThing(...)` and then applying transactions.
This no longer works after the read locking change from T13054. To make this function again, just add an explicit `save()` after layout adjustment. This should be more nuanced eventually, but all arrange operations are nonfunctional in a corrupting way at HEAD of `master`/`stable`, so stop the bleeding first.
Test Plan:
- Created new empty and template dashboards.
- Moved panels.
- Added new and existing panels.
- Removed panels.
Maniphest Tasks: T13083, T13054
Differential Revision: https://secure.phabricator.com/D19123
Summary:
Depends on D19121. Ref T13083. Group transactions and show groups in the debugging view.
Fix some of the most obvious issues with fact generation:
- No more 0-point facts.
- Engine can now generate at least one of every type of fact.
Test Plan: Generated facts, viewed them in the debugging view, fact generation largely appeared to align with reality. No more "no facts in storage" facts.
Subscribers: yelirekim
Maniphest Tasks: T13083
Differential Revision: https://secure.phabricator.com/D19122
Summary:
Depends on D19120. Ref T13083. When you write a fact engine, it's currently somewhat difficult to figure out exactly what it's doing. It would also be difficult to diagnose bugs or report them to the upstream.
To ease this, add a page which shows all the facts an object generates. This allows you to iterate on an engine quickly without needing to reanalyze facts, take a screenshot, easily compare the timeline to the fact view, etc.
Test Plan: Viewed the object fact page for several objects.
Subscribers: yelirekim
Maniphest Tasks: T13083
Differential Revision: https://secure.phabricator.com/D19121
Summary:
Depends on D19119. Ref T13083. This is probably still very buggy, but I'm planning to build support tools to make debugging facts easier shortly.
This generates a large number of datapoints, at least, and can render some charts which aren't all completely broken in an obvious way.
Test Plan: Ran `bin/fact analyze --all`, got some charts with lines that went up and down in the web UI.
Subscribers: yelirekim
Maniphest Tasks: T13083
Differential Revision: https://secure.phabricator.com/D19120
Summary:
Ref T13083. Facts has a fair amount of weird hardcoding and duplication of responsibilities. Reduce this somewhat: no more hard-coded fact aggregates, no more database-driven list of available facts, etc. Generally, derive all objective truth from FactEngines. This is more similar to how most other modern applications work.
For clarity, hopefully: rename "FactSpec" to "Fact". Rename "RawFact" to "Datapoint".
Split the fairly optimistic "RawFact" table into an "IntDatapoint" table with less stuff in it, then dimension tables for the object PHIDs and key names. This is primarily aimed at reducing the row size of each datapoint. At the time I originally wrote this code we hadn't experimented much with storing similar data in multiple tables, but this is now more common and has worked well elsewhere (CustomFields, Edges, Ferret) so I don't anticipate this causing issues. If we need more complex or multidimension/multivalue tables later we can accommodate them. The queries a single table supports (like "all facts of all kinds in some time window") don't make any sense as far as I can tell and could likely be UNION ALL'd anyway.
Remove all the aggregation stuff for now, it's not really clear to me what this should look like.
Test Plan: Ran `bin/fact analyze` and viewed web UI. Nothing exploded too violently.
Subscribers: yelirekim
Maniphest Tasks: T13083
Differential Revision: https://secure.phabricator.com/D19119
Summary: See D19117. Instead of automatically figuring this out inside `phutil_tag()`, explicitly add rel="noreferrer" at the application level to all external links.
Test Plan:
- Grepped for `_blank`, `isValidRemoteURIForLink`, checked all callsites for user-controlled data.
- Created a link menu item, verified noreferrer in markup.
- Created a link custom field, verified no referrer in markup.
- Verified noreferrer for `{nav href=...}`.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D19118
Summary: Ref T13077. The context object wasn't being passed into the engine properly here, affecting relative link rendering in Phriction.
Test Plan: Viewed rendered Phriction documents with relative links, got clean renders.
Maniphest Tasks: T13077
Differential Revision: https://secure.phabricator.com/D19115
Summary: Ref T13077. This content extraction rule wasn't right and caused rendering on Phriction pages to extract context improperly.
Test Plan: Viewed pages in Phriction with relative links to other documents.
Maniphest Tasks: T13077
Differential Revision: https://secure.phabricator.com/D19114
Summary: Ref T13077. Freeze "phriction.info" in favor of the more modern "phriction.document.search".
Test Plan: Reviewed older method in web UI, saw frozen markers.
Maniphest Tasks: T13077
Differential Revision: https://secure.phabricator.com/D19113
Summary: Ref T13077. Adds a "paths" constraint to the API query.
Test Plan: Used paths constraint to fetch documents.
Maniphest Tasks: T13077
Differential Revision: https://secure.phabricator.com/D19112
Summary: Depends on D19107. Ref T13077. The underlying datasource may need some adjustment but this appears to work properly locally.
Test Plan: Typed `[[ por` locally, was suggested "Porcupine Facts". Typed `[[ / ]]`, saw it render as a reference to the wiki root instead of the install root.
Maniphest Tasks: T13077
Differential Revision: https://secure.phabricator.com/D19108
Summary:
Depends on D19106. Fixes T5941. Ref T13077. Allows you to find Phriction documents as suggestions from global quick search.
Also supports `w` to jump to Phriction and `w query` to query Phriction.
The actual query logic for the datasource may need some tweaking after it collides with reality, but seems to produce fairly reasonable results in local testing against synthetic data.
Test Plan: Searched for "Porcupine Facts", "Travel Companions", and other useful local pages. Searched for `w`. Searched for `w zebra facts`.
Maniphest Tasks: T13077, T5941
Differential Revision: https://secure.phabricator.com/D19107
Summary:
Depends on D19105. Ref T13077. Fixes T12344.
The `[[ ... ]]` syntax accepts and handles characters which would require URL encoding if they appeared in URIs. For example, `[[ 100% Natural Cheese Dust ]]` is a legitimate, supported piece of remarkup syntax, and does not need to be written as `... 100%25 Natural ...`.
Likewise, `[[ BUY $DOGE ]]` is legitimate and does not need to be written as `[[ BUY %24DOGE ]]`. This piece of syntax creates a link to `/w/buy_$doge/`. This may or may not appear in your browser's URL bar as `/w/buy_%24doge/`, but internally "$" is a valid slug character and you'll see `buy_$doge` over Conduit, etc.
However, since users may reasonably copy paths from their browser URL bar, they may have unnecessary URL encoding. The syntax `[[ buy_$doge ]]` is legitimate, but a user copy/pasting may write `[[ buy_%24doge ]]` instead.
Currently, this extra URL encoding causes links to break, since `[[ buy_%24doge ]]` is a treated as link to `/w/buy_24doge/`, just like `[[ Fresh 100%AB Blood ]]` is a link to `/w/fresh_100_ab_blood/`.
To fix this:
- When the target for a link can be URL decoded, try to do lookups on both the un-decoded and decoded variations.
- If the un-decoded variation works, great: use it. This preserves behavior for all existing, working links.
- If the un-decoded variation fails but the decoded variation works, okay: we'll assume you copy-pasted a URL-encoded version and strip URL encoding.
- If both fail, same behavior as before.
Also, use a different spelling for "existent".
See T13084 for some "attacks" based on this behavior. I think the usability affordance this behavior provides greatly outweighs the very mild threat those attacks represent.
Test Plan:
- Created links to existing, nonexisting, and existing-but-not-visible documents, all of which worked normally.
- Created links to `[[ $doge ]]` and `[[ %24doge ]]`, saw them both go to the right place.
- Performed the "attacks" in T13084.
Maniphest Tasks: T13077, T12344
Differential Revision: https://secure.phabricator.com/D19106
Summary:
Fixes T10969. Ref T13077. When you create a Phriction document with a relative link (`[[ ./path/to/page ]]`) the initial email currently points to the wrong place.
This is because the context object (the page) isn't passed to the markup engine. Without this context, the relative link is rendered as though it appeared somewhere else (like a task or revision) where relative links don't make sense.
Test Plan: Created a new Phriction document with a relative link to `[[ ./porcupine_facts/starmap ]]`, saw a usable link in the resulting email.
Maniphest Tasks: T13077, T10969
Differential Revision: https://secure.phabricator.com/D19105
Summary:
See PHI370. Support the "Affected packages" and "Affected package owners" Herald fields in pre-commit hooks.
I believe there's no technical reason these fields aren't supported and this was just overlooked.
Test Plan: Wrote a rule which makes use of the new fields, pushed commits through it. Checked transcripts and saw sensible-looking values.
Differential Revision: https://secure.phabricator.com/D19104
Summary: Depends on D19100. Ref T13077. Adds a "content" attachment to get the actual page text. This works on both "phriction.document.search" and "phriction.content.search".
Test Plan: Called both API methods with the attachment, saw proper text content returned.
Maniphest Tasks: T13077
Differential Revision: https://secure.phabricator.com/D19103
Summary:
Depends on D19099. Ref T13077. Updates Phriction documents to string constants to make API interactions cleaner and statuses more practical to extend.
This does not seem to require any transaction migrations because none of the Phriction transactions actually store status values: status is always a side effect of other edits.
Test Plan: Created, edited, deleted, moved documents. Saw appropriate UI cues. Browsed and filtered documents by status in the index.
Maniphest Tasks: T13077
Differential Revision: https://secure.phabricator.com/D19100
Summary:
Depends on D19098. Ref T13077.
Phriction status constants currently use the "bag of statuses" approach typical of older code, and store integers in the database.
This fixes the "bag of statuses" stuff; a future change will fix the integers.
Also adds a skeleton for `phriction.document.search`, but doesn't implement the Conduit interface yet.
Test Plan: Searched for documents with various status constraints. Grepped for removed status constants. Viewed document list.
Maniphest Tasks: T13077
Differential Revision: https://secure.phabricator.com/D19099
Summary: Depends on D19097. Ref T13077. Freeze the older method now that the newer one is available.
Test Plan: Viewed the older method's page and saw it frozen; called it to make sure I didn't break it by accident.
Maniphest Tasks: T13077
Differential Revision: https://secure.phabricator.com/D19098
Summary: Depends on D19096. Ref T13077. Adds a new "v3" API method for Phriction document content, to replace the existing "phriction.history" call.
Test Plan: Made various calls via web API console.
Maniphest Tasks: T13077
Differential Revision: https://secure.phabricator.com/D19097
Summary:
Depends on D19095. Ref T6203. Ref T13077. This column is nullable in an inconsistent way. Make it non-nullable.
Also clean up one more content query on the history view.
Test Plan: Ran migration, then created and edited documents without providing a descriptino or hitting `NULL` exceptions.
Maniphest Tasks: T13077, T6203
Differential Revision: https://secure.phabricator.com/D19096
Summary: Depends on D19094. Ref T13077. Use modern infrastructure to perform these loads. I left a couple of calls in the older API methods unconverted.
Test Plan: Viewed documents. Viewed older versions. Viewed diffs. Did revert edits to older versions.
Maniphest Tasks: T13077
Differential Revision: https://secure.phabricator.com/D19095
Summary:
Depends on D19093. Ref T13077. Although content objects normally don't have any edges today, they may in the future.
Also implement Policy stuff properly.
Test Plan: Used `bin/remove destroy` to destroy a document, verified it also loaded and destroyed the correspoding Content correctly by looking at `--trace` and the database rows.
Maniphest Tasks: T13077
Differential Revision: https://secure.phabricator.com/D19094
Summary:
Depends on D19092. Ref T13077. This modernizes markup rendering for PhrictionContent.
This is a little messy because table of contents generation isn't straightforward.
Test Plan: Viewed Phriction documents with and without 3+ headers, saw ToC vs no ToC. Edited/previewed documents. Grepped for affected symbols. Checked DarkConsole for sensible cache behavior.
Maniphest Tasks: T13077
Differential Revision: https://secure.phabricator.com/D19093
Summary: Ref T13077. Prepares for modern API access to document history using standard "v3" APIs.
Test Plan: Ran migration, verified PHIDs appeared in the database. Created/edited a document, got even more PHIDs in the database.
Maniphest Tasks: T13077
Differential Revision: https://secure.phabricator.com/D19092
Summary: Ref T13073. The new log output from `bin/drydock lease` currently uses HTML handle rendering, but should render to text.
Test Plan: Ran `bin/drydock lease` and saw normal text in log output. Viewed the same logs from the web UI and saw HTML.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13073
Differential Revision: https://secure.phabricator.com/D19101
Summary: Depends on D19089. Fixes T13079. This is likely not the final form of this, but creates a defensible extension point.
Test Plan: See T13079 for discussion.
Maniphest Tasks: T13079
Differential Revision: https://secure.phabricator.com/D19090
Summary:
Depends on D19088. Ref T13079.
> Any sufficiently complicated C or Fortran program contains an ad hoc, informally-specified, bug-ridden, slow implementation of half of Common Lisp.
> - Greenspun's Tenth Rule
Move us a step closer to this noble goal.
This doesn't implement any `viewer(project())` stuff but it looks like the API doesn't need to change to do that in the future.
Test Plan: Grimmaced in pain.
Maniphest Tasks: T13079
Differential Revision: https://secure.phabricator.com/D19089
Summary: Depends on D19087. Ref T13079. This still doesn't feel like the most clean, general system in the world, but is a step forward from hard-coded `switch()` stuff.
Test Plan:
- Jumped to `r`.
- Jumped to `a`.
- Jumped to `r poe` (multiple results).
- Jumped to `r poetry` (one result).
- Jumped to `r syzygy` (no results).
- Jumped to `p`.
- Jumped to `p robot` (multiple results); `p assessment` (one result).
- The behavior for `p <string>` has changed slightly but should be more powerful now (it's consistent with `r <string>`).
- Jumped to `s <symbol>` and `s <context>-><symbol>`.
- Jumped to `d`.
- Jumped to `f`.
- Jumped to `t`.
- Jumped to `T123`, `D123`, `@dog`, `PHID-DREV-abcd`, etc.
Maniphest Tasks: T13079
Differential Revision: https://secure.phabricator.com/D19088
Summary: Ref T13079. This recently-introduced Engine/EngineExtension are a good fit for adding more datasource functions in general, but we didn't think quite big enough in naming them.
Test Plan: Used quick search typeahead, hit applications/users/monograms/symbols/etc.
Maniphest Tasks: T13079
Differential Revision: https://secure.phabricator.com/D19087
Summary:
Depends on D19084. Fixes T13078. When `phabricator.silent` is enabled, immediately fail the "HTTP Request", "CircleCI" and "Buildkite" build steps.
This doesn't feel quite as clean as most of the other behavior of `phabricator.silent`, since these calls are not exactly notifications in the same way that email is, and failing to make these calls means that builds run differently (whereas failing to deliver email doesn't really do anything).
However, I suspect that this behavior is almost always reasonable/correct, and that we can probably get away with it until this grey area between "notifications" and "external service calls" is more clearly defined.
Test Plan:
- Created a build with HTTP, CircleCI, and Buildkite steps.
- Put install in `phabricator.silent` mode: all three steps failed with "declining, because silent" messages.
- Put install back in normal mode: all three steps made HTTP requests.
- Read updated documentation.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13078
Differential Revision: https://secure.phabricator.com/D19085
Summary: Ref T13078. The `phabricator.silent` configuration flag should disable webhook calls, since this is consistent with the documented and desired behavior.
Test Plan: Enabled `phabricator.silent`, made test hook calls, saw them fail with a "silent" failure reason.
Maniphest Tasks: T13078
Differential Revision: https://secure.phabricator.com/D19084
Summary: Revisions with blocking reviewers had this stamp built incorrectly, which cascaded into trying to use `array()` as a PHID. Recover so these tasks succeed.
Test Plan: Will deploy production.
Differential Revision: https://secure.phabricator.com/D19082
Summary:
Depends on D19078. Ref T13073. Currently, there is a narrow window where we can acquire a resource after a reclaim has started against it.
To prevent this, briefly lock resources before acquiring them and make sure they're still good. If a resource isn't good, throw the lease back in the pool.
Test Plan:
This is tricky. You need:
- Hoax blueprint with limits and a rule where leases of a given "flavor" can only be satisfied by resources of the same flavor.
- Reduce the 3-minute "wait before resources can be released" to 3 seconds.
- Limit Hoaxes to 1.
- Allocate one "cherry" flavored Hoax and release the lease.
- Add a `sleep(15)` to `releaseResource()` in `DrydockResourceUpdateWorker`, after the `canReclaimResource()` check, with a `print`.
Now:
- Run `bin/phd debug task` in two windows.
- Run `bin/drydock lease --type host --attributes flavor=banana` in a third window.
- This will start to reclaim the existing "cherry" resource. Once one of the `phd` windows prints the "RECLAIMING" message run `bin/drydock lease --type host --attributes flavor=cherry` in a fourth window.
- Before patch: the "cherry" lease acquired immediately, then was released and destroyed moments later.
- After patch: the "cherry" lease yields.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13073
Differential Revision: https://secure.phabricator.com/D19080
Summary:
Depends on D19077. Ref T13073. When we're using slot locks to enforce a limit (e.g., maximum of 5 simultaneous things) we currently load locks owned by the blueprint to identify which slots are likely to be free.
However, this isn't right: the blueprint doesn't own these locks. The resources do.
We still get the right behavior eventually, but we incorrectly identify that every slot lock is always free, so as the slots fill up we'll tend to guess wrong more and more often.
Instead, load the slot locks by name explicitly.
Test Plan: Implemented lock-based limiting on `HoaxBlueprint`, `var_dump()`'d the candidate locks, saw correct test state for locks. Acquired leases without releasing, got all of the slots filled without any slot lock collisions (previously, the last slot or two tended to collide a lot).
Subscribers: yelirekim, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13073
Differential Revision: https://secure.phabricator.com/D19078
Summary:
Depends on D19076. Ref T13073. Blueprints are stored as an attribute and `setAttributes()` overwrites all attributes.
This is sorta junk but make it less obviously broken, at least.
Test Plan: Ran `bin/drydock lease --type working-copy --attributes x=y` without instantly getting a fatal about "no blueprint PHIDs".
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13073
Differential Revision: https://secure.phabricator.com/D19077
Summary:
Depends on D19075. Ref T13073. If a lease acquires a resource but finds that the resource builds directly into a dead state (which can happen for any number of reasonable reasons), reset the lease and throw it back in the pool.
This isn't the lease's fault and it hasn't caused any side effects or done anything we can't undo, so we can safely reset it and throw it back in the pool.
Test Plan:
- Created a blueprint which throws from `allocateResource()` so that resources never activate.
- Tried to lease it with `bin/drydock lease ...`.
- Before patch: lease was broken and destroyed after a failed activation.
- After patch: lease was returned to the pool after a failed activation.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13073
Differential Revision: https://secure.phabricator.com/D19076
Summary: Ref T13073. Depends on D19074. Update icons and UI for resource status.
Test Plan: Viewed resources in detail view and list view, saw better status icons.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13073
Differential Revision: https://secure.phabricator.com/D19075
Summary:
Depends on D19073. Ref T13073. Give leases a normal header tag and try to wrangle their status constants a bit.
Also, try to capture the "status class" pattern a bit. Since we target PHP 5.2.3 we can't use `static::` so the actual subclass is kind of a mess. Not exactly sure if I want to stick with this or not. We could consider targeting PHP 5.3.0 instead to get `static::` / late static binding.
Test Plan: Viewed leases and lease lists, saw better and more conventional status information.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13073
Differential Revision: https://secure.phabricator.com/D19074
Summary:
Depends on D19072. Ref T13073. Currently, you can leave leases stranded by using `^C` to interrupt the script. Handle signals and release leases on destruction if they haven't activated yet.
Also, print out more useful information before and after activation.
Test Plan: Mashed ^C while runnning `bin/drydock lease ... --trace`, saw the lease release.
Subscribers: yelirekim, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13073
Differential Revision: https://secure.phabricator.com/D19073
Summary: Depends on D19071. Ref T13073. While the daemons are supposedly doing things, show the user any logs they generate. There's often something relevant but unearthing it can be involved.
Test Plan: {F5427773}
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13073
Differential Revision: https://secure.phabricator.com/D19072
Summary: Depends on D19070. Ref T13073. Some messages contain an interesting story or a clever anecdote. Respect newlines during rendering to preserve authorial intent.
Test Plan:
Viewed a message with linebreaks and could still read it.
{F5427754}
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13073
Differential Revision: https://secure.phabricator.com/D19071
Summary:
Ref T13073. When a Blueprint says it will be able to allocate a resource but then throws an exception while attempting that allocation, we currently fail the lease permanently.
This is excessively harsh. This blueprint may have the best of intentions and have encountered a legitimately unforseeable failure (like a `vm.new` call to build a VM failed) and be able to succeed in the future.
Even if this blueprint is a dirty liar, other blueprints (or existing resources) may be able to satisfy the lease in the future.
Even if every blueprint is implemented incorrectly, leaving the lease alive lets it converge to success after the blueprints are fixed.
Instead of failing, log the issue and yield.
(In the future, it might make sense to distinguish more narrowly between "actually, all the resources are used up" and all other failure types, since the former is likely more routine and less concerning.)
Test Plan:
- Wrote a broken `Hoax` blueprint which always claims it can allocate but never actually allocates (just `throw` in `allocateResource()`).
- Used `bin/phd drydock lease` to acquire a Hoax lease.
- Before patch: lease abruptly failed permanently.
- After patch: lease yields after allocation fails.
{F5427747}
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13073
Differential Revision: https://secure.phabricator.com/D19070
Summary: Like "Commit Hook" rules, these also fire oddly and don't have an object PHID or a list of transactions.
Test Plan: Verified that "Call Webhooks" was no longer available from Diff rules, but still available from other rule types.
Differential Revision: https://secure.phabricator.com/D19069
Summary:
See PHI346. Ref T13054. If you have prototypes enabled on the server but use `master` / `stable` on the client and run `arc diff --plan-changes`, the transition is rejected because "Draft -> Changes Planned" isn't currently a legal transition.
Allow this transition if not coming from the web UI (to keep it out of the dropdown).
Test Plan:
- Ran `arc diff --plan-changes` on `master`, got a "Changes Planned" revision instead of a validation error.
- Ran `arc diff` without `--plan-changes`, got a draft, verified that "Plan Changes" still doesn't appear in the action dropdown.
Maniphest Tasks: T13054
Differential Revision: https://secure.phabricator.com/D19067
Summary:
Depends on D19065. Ref T13054. Instead of just updating `containerPHID` and hoping for the best, queue a proper BuildWorker to process a "your container has changed, update it" message.
We also need to remove a (superfluous) `withContainerPHIDs()` when loading active diffs for a revision.
Test Plan:
- Without daemons, created a revision and saw builds stick in "preparing" with no container PHID, but also stay in draft mode.
- With daemons, saw builds actually build and get the right container PHID.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13054
Differential Revision: https://secure.phabricator.com/D19066
Summary:
Depends on D19064. Ref T13054. See that task for additional discussion.
When buildables are created by `arc` and have lint/unit messages, they can currently pass or fail before Herald triggers actual builds. This puts them in a pre-build state where they can't complete until Herald says it's okay.
On its own, this change intentionally strands `arc diff --only` diffs in the "PREPARING" stage forever.
Test Plan:
- Ran a build with `bin/harbormaster`, saw it build normally.
- Ran a build with web UI, saw it build normally.
- Ran a build with `arc diff`, saw it build normally.
- Ran a build with `arc diff --only`, saw it hang in "PREPARING" forever.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13054
Differential Revision: https://secure.phabricator.com/D19065
Summary: Depends on D19063. Ref T13054. Prepare for the addition of a new `PREPARING` status by getting rid of the "scattered mess of switch statements" pattern of status management.
Test Plan: Searched/browsed buildables. Viewed buildables. Viewed revisions. Grepped for all affected symbols.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13054
Differential Revision: https://secure.phabricator.com/D19064
Summary: Ref T13054. Companion storage change for D19062.
Test Plan: Applied migration and adjustments. Viewed messages in Harbormaster; created them with `harbormaster.sendmessage`; processed them with `bin/phd debug task`.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13054
Differential Revision: https://secure.phabricator.com/D19063
Summary:
See T13054. This prepares for Buildables to be sent messages ("attach", "done scheduling builds") to fix races between Harbormaster and Differential.
The `buildTargetPHID` is replaced with a `recipientPHID` in the API. An additional change will fix the storage.
In the future, this table could probably also replace `HarbormasterBuildCommand` now, which is approximately the same bus, but for Builds.
Test Plan: Viewed builds with messages. Sent messages with `harbormaster.sendmessage`. Processed messages with `bin/phd debug task`.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D19062
Summary: Fixes T13071. See that task for discusison. I think this `<= version` constraint is needless in normal cases (it should match everything in the table anyway), and slightly harmful in bizarre cases where a draft somehow gets a much larger ID than it should have.
Test Plan:
- Gave a draft an unreasonably large ID.
- Pre-patch, observed: submitting comments on the draft's object does not clear the draft.
- Post-patch: submitting comments on the draft's object now clears the draft correctly.
- Also added comments/actions, reloaded pages, saw drafts stick properly.
Maniphest Tasks: T13071
Differential Revision: https://secure.phabricator.com/D19060
Summary: Ref T13054. Fixes T12714. Applies read locks to all transactions instead of only a very select subset (chat messages in Conpherence).
Test Plan: See <T13054#235650> for discussion and testing.
Maniphest Tasks: T13054, T12714
Differential Revision: https://secure.phabricator.com/D19059
Summary: Depends on D19056. Fixes T8475. Ref T13054. Merges "ModernHunk" back into "Hunk".
Test Plan: Grepped for `modernhunk`. Reviewed revisions. Created a new revision. Used `bin/differential migrate-hunk` to migrate hunks between storage formats and back.
Maniphest Tasks: T13054, T8475
Differential Revision: https://secure.phabricator.com/D19057
Summary: Ref T13054. Ref T8475. This table has had no readers or writers for more than a year after it was migrated to the modern table.
Test Plan: Ran migration, verified that all the data was still around.
Maniphest Tasks: T13054, T8475
Differential Revision: https://secure.phabricator.com/D19056
Summary:
Ref T13054. Fixes T10746. Fixes T11154. This is really a one-line fix (include `ABORTED` in `BuildEngine->updateBuildable()`) but try to structure the code a little more clearly too and reduce (at least slightly) the number of random lists of status attributes spread throughout the codebase.
Also add a header tag for buildable status.
Test Plan: Aborted a build, saw buildable fail properly.
Subscribers: yelirekim, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13054, T11154, T10746
Differential Revision: https://secure.phabricator.com/D19055
Summary: See PHI358. The `bin/almanac [un]trust-key` workflows don't properly purge the SSH key cache, but should.
Test Plan:
- Added key `ssh-rsa xyz` to a device.
- Used `bin/ssh-auth | grep xyz` to test for the presence of the key.
- Before patch: Saw it not present, trusted it, saw it still not present.
- After patch: Saw it not present, trusted it, saw it now present. Untrusted it, saw it no longer present.
Differential Revision: https://secure.phabricator.com/D19053
Summary:
Fixes T6121. See PHI357.
- Allow emoji and other unicode (like Chinese characters) as long as you have at least three of them.
- Disallow macros with only latin symbols. These were previously allowed.
Test Plan: Created a macro for "🐶🐶🐶", then used it in a comment.
Maniphest Tasks: T6121
Differential Revision: https://secure.phabricator.com/D19051
Summary: Depends on D19049. Ref T11330. Adds some documentation for webhooks.
Test Plan: Read the documentation and found it to be exceptionally accurate and helpful.
Maniphest Tasks: T11330
Differential Revision: https://secure.phabricator.com/D19050
Summary: Depends on D19048. Fixes T11330.
Test Plan: Wrote rules to call webhooks selectively, saw them fire appropriately with correct trigger attribution.
Maniphest Tasks: T11330
Differential Revision: https://secure.phabricator.com/D19049
Summary: Depends on D19047. Ref T11330. Triggers every firehose hook on every edit; prepares for Herald triggers.
Test Plan: Configured a firehose hook, edited some objects, saw callbacks.
Maniphest Tasks: T11330
Differential Revision: https://secure.phabricator.com/D19048
Summary: Depends on D19046. Ref T11330. Supports querying for specific transactions while responding to webhooks.
Test Plan: Called `transaction.search` with and without PHID constraints.
Maniphest Tasks: T11330
Differential Revision: https://secure.phabricator.com/D19047
Summary:
Depends on D19045. Ref T11330.
- View/regenerate HMAC keys.
- Pretty JSON.
- Readable status transactions.
- test, silent, secure flags.
- Dates on request view.
- More icons.
- Can test any object.
- GC for requests.
Test Plan: Went through each feature poking at it in the web UI and with `bin/webhook call ...` / `bin/garbage collect ...`.
Subscribers: ftdysa
Maniphest Tasks: T11330
Differential Revision: https://secure.phabricator.com/D19046
Summary: Ref T11330. Adds general support for webhooks. This is still rough and missing a lot of pieces -- and not yet useful for anything -- but can make HTTP requests.
Test Plan: Used `bin/webhook call ...` to complete requests to a test endpoint.
Maniphest Tasks: T11330
Differential Revision: https://secure.phabricator.com/D19045
Summary: I made the red stronger (always visible, not just a hover state) for the "Mute" feature, but this made Logout look a little intense. Just make it normal-colored, logging out isn't a big deal.
Test Plan: No longer saw bright red logout action in profile dropdown menu.
Differential Revision: https://secure.phabricator.com/D19044
Summary: Ref T12677. Skip these checks if we're doing the new stuff. Also, allow priority to be unspecified.
Test Plan: Will deploy.
Maniphest Tasks: T12677
Differential Revision: https://secure.phabricator.com/D19043
Summary: See PHI356. Adds inline comment and done counts to the filetree. Also makes the filetree wider by default.
Test Plan: Fiddled with filetrees in different browsers on different revisions. Added inlines, marked them done/undone.
Differential Revision: https://secure.phabricator.com/D19041
Summary: See PHI356. Makes it easier to pick out change types in the filetree view in Differential.
Test Plan: Created a diff with adds, copies, moves, deletions, and binary files. Viewed in Differential, had an easier time picking stuff out.
Differential Revision: https://secure.phabricator.com/D19040
Summary: Depends on D19038. Fixes T4434. Updates the SearchEngine and Query to handle these fields.
Test Plan: Filtered and ordered by date and closer.
Maniphest Tasks: T4434
Differential Revision: https://secure.phabricator.com/D19039
Summary:
Depends on D19037. Ref T4434. Adds closed date to `maniphest.search` and "Export Data".
When a task has been closed, show the closed date with a checkmark in the UI instead of the modified date.
Test Plan:
- Exported data to CSV, saw close information.
- Saw close information in `/maniphest/`.
- Queried for close information via `maniphest.search`.
Maniphest Tasks: T4434
Differential Revision: https://secure.phabricator.com/D19038
Summary:
Ref T4434. Although some of the use cases for this data are better fits for Facts, this data is reasonable to track separately.
I have an approximate view of it already ("closed, ordered by date modified") that's useful to review things that were fixed recently. This lets us make that view more effective.
This just adds (and populates) the storage. Followups will add Conduit, Export, Search, and UI support.
This is slightly tricky because merges work oddly (see T13020).
Test Plan:
- Ran migration, checked database for sensible results.
- Created a task in open/closed status, got the right database values.
- Modified a task to close/open it, got the right values.
- Merged an open task, got updates.
Maniphest Tasks: T4434
Differential Revision: https://secure.phabricator.com/D19037
Summary:
See D18176. This query has no effect (other than wasting resources) and the result is unused.
`$repository` already has the URI loaded because we load them unconditionally during request initialization.
Test Plan: Viewed repository URIs.
Subscribers: jmeador
Differential Revision: https://secure.phabricator.com/D19036
Summary: Ref T13053. See PHI126. Add an explicit "Mute" action to kill mail and notifications for a particular object.
Test Plan: Muted and umuted an object while interacting with it. Saw mail route appropriately.
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D19033
Summary:
Ref T13053. Fixes T7804. Adds "Acting user" so you can have "always email me" stuff skip things you did or keep an eye on suspicious interns.
For the test console, the current user is the acting user.
For pushes, the pusher is the acting user.
Test Plan: Wrote acting user rules, triggered them via test console and via multiple actors on real objects.
Maniphest Tasks: T13053, T7804
Differential Revision: https://secure.phabricator.com/D19031
Summary: Fixes T10189. Ref T13053. We haven't sent these headers in a very long time. Briefly mention the new stamps header instead, although I expect to integrate stamp documentation into the UI in a more cohesive way in the future.
Test Plan: Read documentation.
Maniphest Tasks: T13053, T10189
Differential Revision: https://secure.phabricator.com/D19030
Summary: Depends on D19028. Ref T13053. Fixes T6576. An HTML body was built here, but not passed to the actual mail message.
Test Plan: Will verify production push mail.
Maniphest Tasks: T13053, T6576
Differential Revision: https://secure.phabricator.com/D19029
Summary: Ref T13053. Some mail (like push notification mail) doesn't currently generate any stamps. Drop this section if there aren't any stamps on the mail.
Test Plan: Will check push mail in production.
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D19028
Summary: Ref T13053. Uses the changes in D19026 to escape mail addresses. Those rules may not be right yet, but they're at least all in one place, have test coverage, and aren't obviously incorrect.
Test Plan: Will vet this more extensively when re-testing all mailers.
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D19027
Summary:
Ref T13053. Postmark support recommends testing requests against a whitelist of known remote addresses to determine request authenticity. Today, the list can be found here:
<https://postmarkapp.com/support/article/800-ips-for-firewalls>
This is potentially less robust than, e.g., HMAC verification, since they may need to add new datacenters or support IPv6 or something. Users might also have weird network topologies where everything is proxied, and this makes testing/simulating more difficult.
Allow users to configure the list so that they don't need to hack things apart if Postmark adds a new datacenter or remote addresses are unreliable for some other reason, but ship with safe defaults for today.
Test Plan:
Tried to make local requests, got kicked out. Added `0.0.0.0/0` to the list, stopped getting kicked out.
I don't have a convenient way to route real Postmark traffic to my development laptop with an authentic remote address so I haven't verified that the published remote address is legitimate, but I'll vet that in production when I go through all the other mailers.
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D19025
Summary:
See support email. There's nothing tricky here, we were just missing a check. The different parts of this got built at different times so I think this was simply overlooked.
Also add a redundant check just to future-proof this and be on the safe side.
Test Plan: Used `bin/phortune invoice` to charge a pact subscription. After deleting the card, the charge failed with an appropriate error.
Reviewers: amckinley
Differential Revision: https://secure.phabricator.com/D19020
Summary:
Depends on D19021. Ref T13053. When you "Subscribe", or make some other types of edits, we don't necessarily have reviewer data, but may now need it to do the new recipient list logic.
I don't have a totally clean way to deal with this in the general case in mind, but just load it for now so that things don't fatal.
Test Plan: Subscribed to a revision with the "Subscribe" action.
Reviewers: amckinley
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D19022
Summary:
Depends on D19019. Ref T13053. Fixes T12689. See PHI178.
Currently, if `@alice` resigns from a revision but `#alice-fan-club` is still a subscriber or reviewer, she'll continue to get mail. This is undesirable.
When users are associated with an object but have explicitly disengaged in an individal role (currently, only resign in audit/differential) mark them "unexpandable", so that they can no longer be included through implicit membership in a group (a project or package).
`@alice` can still get mail if she's a explicit recipient: as an author, owner, or if she adds herself back as a subscriber.
Test Plan:
- Added `@ducker` and `#users-named-ducker` as reviewers. Ducker got mail.
- Resigned as ducker, stopped getting future mail.
- Subscribed explicitly, got mail again.
- (Plus some `var_dump()` sanity checking in the internals.)
Reviewers: amckinley
Maniphest Tasks: T13053, T12689
Differential Revision: https://secure.phabricator.com/D19021
Summary:
Depends on D19018. Fixes T4776. Ref T13053. When you remove someone from an object's recipient list (for example, by removing them a reviewer, auditor, subscriber, owner or author) we currently do not send them mail about it because they're no longer connected to the object.
In many of these cases (Commandeer, Reassign) the actual action in the UI adds them back to the object somehow (as a reviewer or subscriber, respectively) so this doesn't actually matter. However, there's no recovery mechanism for reviewer or subscriber removal.
This is slightly bad from a policy/threat viewpoint since it means an attacker can remove all the recipients of an object "somewhat" silently. This isn't really silent, but it's less un-silent than it should be.
It's also just not very good from a human interaction perspective: if Alice removes Bob as a reviewer, possibly "against his will", he should be notified about that. In the good case, Alice wrote a nice goodbye note that he should get to read. In the bad case, he should get a chance to correct the mistake.
Also add a `removed(@user)` mail stamp so you can route these locally if you want.
Test Plan:
- Created and edited some different objects without catching anything broken.
- Removed subscribers from tasks, saw the final email include the removed recipients with a `removed()` stamp.
I'm not totally sure this doesn't have any surprising behavior or break any weird objects, but I think anything that crops up should be easy to fix.
Reviewers: amckinley
Subscribers: sophiebits
Maniphest Tasks: T13053, T4776
Differential Revision: https://secure.phabricator.com/D19019
Summary:
Depends on D19017. Fixes T12491. Ref T13053. After SES threw us in the dungeon for sending mail to a spamtrap we changed outbound mail rules to stop sending to unverified addresses, except a small amount of registration mail which we can't avoid.
However, we'll still reply to random inbound messages with a helpful error, even if the sender is unverified.
Instead, only send exception mail back if we know who the sender is.
Test Plan: Processed inbound mail with `scripts/mail/mail_handler.php`. No more outbound mail for "bad address", etc. Still got outbound mail for "unknown command !quack".
Reviewers: amckinley
Maniphest Tasks: T13053, T12491
Differential Revision: https://secure.phabricator.com/D19018
Summary: Depends on D19016. Ref T13053. Adds a listener for the Postmark webhook.
Test Plan:
Processed some test mail locally, at least:
{F5416053}
Reviewers: amckinley
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D19017
Summary:
Depends on D19015. Ref T13053. Currently, we don't link up hyperlinks in the body of mail viewed in the web UI. We should, but this is a little tricky (see T13053#235074).
As a general improvement to make working with "Must Encrypt" mail less painful, add a big button to jump to the related object.
Test Plan: {F5415990}
Reviewers: amckinley
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D19016
Summary: Depends on D19014. Ref T13053.
Test Plan: Used `./bin/mail show-outbound --id <id> --dump-html > out.html && open out.html` to look at HTML mail, saw smaller, lighter stamp text with better spacing.
Reviewers: amckinley
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D19015
Summary:
Depends on D19013. Ref T13053. When mail is marked "Must Encrypt", we normally do not include recipient information.
However, when `metamta.one-mail-per-recipient` is disabled, the recipient list will leak in the "To" and "Cc" headers. This interaction is probably not very surprising, but document it explicitly for completeness.
(Also use "Mail messages" instead of "Mails".)
Test Plan: Read documentation in the "Config" application.
Reviewers: amckinley
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D19014
Summary:
Depends on D19012. Ref T13053. In D19012, I've changed "Thread-Topic" to always use PHIDs.
This change drops the selective on-object storage we have to track the original, human-readable title for objects.
Even if we end up backing out the "Thread-Topic" change, we'd be better off storing this in a table in the Mail app which just has `<objectPHID, first subject we used when sending mail for that object>`, since then we get the right behavior without needing every object to have this separate field.
Test Plan: Grepped for `original`, `originalName`, `originalTitle`, etc.
Reviewers: amckinley
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D19013
Summary:
Depends on D19009. Ref T13053. For "Must Encrypt" mail, we must currently strip the "Thread-Topic" header because it sometimes contains sensitive information about the object.
I don't actually know if this header is useful or anyting uses it. My understanding is that it's an Outlook/Exchange thing, but we also implement "Thread-Index" which I think is what Outlook/Exchange actually look at. This header may have done something before we implemented "Thread-Index", or maybe never done anything. Or maybe older versions of Excel/Outlook did something with it and newer versions don't, or do less. So it's possible that an even better fix here would be to simply remove this, but I wasn't able to convince myself of that after Googling for 10 minutes and I don't think it's worth hours of installing Exchange/Outlook to figure out. Instead, I'm just trying to simplify our handling of this header for now, and maybe some day we'll learn more about Exchange/Outlook and can remove it.
In a number of cases we already use the object monogram or PHID as a "Thread-Topic" without users ever complaining, so I think that if this header is useful it probably isn't shown to users, or isn't shown very often (e.g., only in a specific "conversation" sub-view?). Just use the object PHID (which should be unique and stable) as a thread-topic, everywhere, automatically.
Then allow this header through for "Must Encrypt" mail.
Test Plan: Processed some local mail, saw object PHIDs for "Thread-Topic" headers.
Reviewers: amckinley
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D19012
Summary: Depends on D19007. Ref T12677.
Test Plan: Used `bin/mail send-test ... --mailer postmark` to deliver some mail via Postmark.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12677
Differential Revision: https://secure.phabricator.com/D19009
Summary: Depends on D19006. Ref T13053. Ref T12677. When multiple mailers are configured but one or more fail, test that we recover (or don't) appropriately.
Test Plan: Ran unit tests.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13053, T12677
Differential Revision: https://secure.phabricator.com/D19007
Summary: Depends on D19005. Ref T12677. Ref T13053. Tests that turning `cluster.mailers` into an actual list of mailers more or less works as expected.
Test Plan: Ran unit tests.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13053, T12677
Differential Revision: https://secure.phabricator.com/D19006
Summary:
Depends on D19004. Ref T13053. Ref T12677. If the new `cluster.mailers` is configured, make use of it. Also use it in the Sengrid/Mailgun inbound stuff.
Also fix a bug where "Must Encrypt" mail to no recipients could fatal because no `$mail` was returned.
Test Plan: Processed some mail locally. The testing on this is still pretty flimsy, but I plan to solidify it in an upcoming change.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13053, T12677
Differential Revision: https://secure.phabricator.com/D19005
Summary:
Depends on D19003. Ref T12677. Ref T13053. For the first time, we're requiring CLI configuration of a complex value (not just a string, integer, bool, etc) to do something fairly standard (send mail).
Users sometimes have very reasonable difficulty figuring out how to `./bin/config set key <some big JSON mess>`. Provide an easy way to handle this and make sure it gets appropriate callouts in the documentation.
(Also, hide the `cluster.mailers` value rather than just locking it, since it may have API keys or SMTP passwords.)
Test Plan: Read documentation, used old and new flags to set configuration.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13053, T12677
Differential Revision: https://secure.phabricator.com/D19004
Summary:
Depends on D19002. Ref T13053. Ref T12677. Adds a new option to allow configuration of multiple mailers.
Nothing actually uses this yet.
Test Plan: Tried to set it to various bad values, got reasonable error messages. Read documentation.
Reviewers: amckinley
Maniphest Tasks: T13053, T12677
Differential Revision: https://secure.phabricator.com/D19003
Summary:
Depends on D19000. Ref T13053. Ref T12677. Currently, most mailers are configured with a bunch of `<mailer>.setting-name` global config options.
This means that you can't configure two different SMTP servers, which is a reasonable thing to want to do in the brave new world of mail failover.
It also means you can't configure two Mailgun accounts or two SES accounts. Although this might seem a little silly, we've had more service disruptions because of policy issues / administrative error (where a particular account was disabled) than actual downtime, so maybe it's not completely ridiculous.
Realign mailers so they can take configuration directly in an explicit way. A later change will add new configuration to take advantage of this and let us move away from having ~10 global options for this stuff eventually.
(This also makes writing third-party mailers easier.)
Test Plan:
Processed some mail, ran existing unit tests. But I wasn't especially thorough.
I expect later changes to provide some tools to make this more testable, so I'll vet each provider more thoroughly and add coverage for multiple mailers after that stuff is ready.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13053, T12677
Differential Revision: https://secure.phabricator.com/D19002
Summary:
Depends on D18998. Ref T13053. When we send "Must Encrypt" mail, we currently send it with a normal "From" address.
This discloses a little information about the object (for example, if the Director of Silly Walks is interacting with a "must encrypt" object, the vulnerability is probably related to Silly Walks), so anonymize who is interacting with the object.
Test Plan: Processed some mail. (The actual final "From" is ephemeral and a little tricky to examine and I didn't actually transmit mail over the network, but it should be obvious if this works or not on `secure`.)
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D19000
Summary:
Ref T13053. Ref T12677. This restructures the calls and error handling logic so that we can pass in a list of multiple mailers and get retry logic.
This doesn't actually ever use multiple mailers yet, and shouldn't change any behavior. I'll add multiple-mailer coverage a little further in, since there's currently no way to effectively test which of several mailers ended up transmitting a message.
Test Plan:
- This has test coverage; tests still pass.
- Poked around locally doing things that send mail, saw mail appear to send. I'm not attached to a real mailer though so my confidence in local testing is only so-so.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13053, T12677
Differential Revision: https://secure.phabricator.com/D18998
Summary:
This command also needs a "." instead of an empty string now.
(This powers the file browser typeahead in Diffusion.)
Test Plan: Will test in production since there's still no easy 2.16 installer for macOS.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19010
Summary:
Ref T13053. When you mention one object on another (or link two objects together with an action like "Edit Parent Revisions"), we write a transaction on each side to add the "alice added subtask X" and "alice added parent task Y" items to the timeline.
This behavior now causes problems in T13053 with the "Must Encrypt" flag because it prevents the flag from being applied to the corresponding "inverse edge" mail.
This was added in rP5050389f as a quick workaround for a fatal related to Editors not having enough data to apply Herald on mentions. However, that was in 2014, and since then:
- Herald got a significant rewrite to modularize all the rules and adapters.
- Editing got a significant upgrade in EditEngine and most edit workflows now operate through EditEngine.
- We generally do more editing on more pathways, everything is more modular, and we have standardized how data is loaded to a greater degree.
I suspect there's no longer a problem with just running Herald here, and can't reproduce one. If anything does crop up, it's probably easy (and desirable) to fix it.
This makes Herald fire a little more often: if someone writes a rule, mentioning or creating a relationship to old tasks will now make the rule act. Offhand, that seems fine. If it turns out to be weird, we can probably tailor Herald's behavior.
Test Plan:
I wasn't able to break anything:
- Mentioned a task on another task (original issue).
- Linked tasks with commits, mocks, revisions.
- Linked revisions with commits, tasks.
- Mentioned users, revisions, and commits.
- Verified that mail generated by creating links (e.g., Revision > Edit Tasks) now gets the "Must Encrypt" flag properly.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D18999
Summary:
Ref T13053. Adds revision stamps (status, reviewers, etc). Adds Herald rule stamps, like the existing X-Herald-Rules header.
Removes the "self" stamps, since you can just write a rule against `whatever(@epriestley)` equivalently. If there's routing logic around this, it can live in the routing layer. This avoids tons of self-actor, self-mention, self-reviewer, self-blocking-reviewer, self-resigned-reviewer, etc., stamps.
Use `natcasesort()` instead of `sort()` so that numeric values (like monograms) sort `9, 80, 700` instead of `700, 80, 9`.
Remove the commas from rendering since they don't really add anything.
Test Plan: Edited tasks and revisions, looked at mail stamps, saw stamps that looked pretty reasonable (with no more self stuff, no more commas, sorting numbers, and Herald stamps).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D18997
Summary: Ref T13053. Adds more mail tags with information available on the Editor object.
Test Plan: Banged around in Maniphest, viewed the resulting mail, all the stamps seemed to align with reality.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D18995
Summary:
Ref T13053. Because I previously misunderstood what "multiplex" means, I used it in various contradictory and inconsistent ways.
We can send mail in two ways: either one mail to everyone with a big "To" and a big "Cc" (not default; better for mailing lists) or one mail to each recipient with just them in "To" (default; better for almost everything else).
"Multiplexing" is combining multiple signals over a single channel, so it more accurately describes the big to/cc. However, it is sometimes used to descibe the other approach. Since it's ambiguous and I've tainted it through misuse, get rid of it and use more clear language.
(There's still some likely misuse in the SMS stuff, and a couple of legitimate uses in other contexts.)
Test Plan: Grepped for `multiplex`, saw less of it.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D18994
Summary:
Ref T10448. Currently, we use "mail tags" (in {nav Settings > Email Preferences}) to give users some ability to route mail. There are a number of major issues with this:
- It isn't modular and can't be extended by third-party applications.
- The UI is a giant mess of 5,000 individual settings.
- Settings don't map clearly to actual edits.
- A lot of stuff isn't covered by any setting.
This adds a new system, called "mail stamps", which is similar to "mail tags" but tries to fix all these problems.
I called these "stamps" because: stamps make sense with mail; we can't throw away the old system just yet and need to keep it around for a bit; we don't use this term for anything else; it avoids confusion with project tags.
(Conceptually, imagine these as ink stamps like "RETURN TO SENDER" or "FRAGILE", not actual postage stamps.)
The only real "trick" here is that later versions of this will need to enumerate possible stamps for an object and maybe all possible stamps for all objects in the system. This is why stamp generation is separated into a "template" phase and a "value" phase. In future changes, the "template" phase can be used on its own to generate documentation and typeaheads and let users build rules. This may need some more refinement before it really works since I haven't built any of that yet.
Also adds a preference for getting stamps in the header only (default) or header and body (better for Gmail, which can't route based on headers).
Test Plan:
Fiddled with preference, sent some mail and saw a "STAMPS" setting in the body and an "X-Phabricator-Stamps" header.
{F5411694}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10448
Differential Revision: https://secure.phabricator.com/D18991
Summary:
Ref T13048. See <https://discourse.phabricator-community.org/t/configuring-commit-hook-commit-content-rules-fail-with-exception/1077/3>.
When a rule supports only one repetition policy (always "every time") like "Commit Hook" rules, we don't render a control for `repetition_policy` and fail to update it when saving.
Before the changes to support the new "if the rule did not match the last time" policy, this workflow just defaulted to "every time" if the input was invalid, but this was changed by accident in D18926 when I removed some of the toInt/toString juggling code.
(This patch also prevents users from fiddling with the form to create a rule which evaluates with an invalid policy; this wasn't validated before.)
Test Plan:
- Created new "Commit Hook" (only one policy available) rule.
- Saved existing "Commit Hook" rule.
- Created new "Task" (multiple policies) rule.
- Saved existing Task rule.
- Set task rule to each repetition policy, saved, verified the save worked.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13048
Differential Revision: https://secure.phabricator.com/D18992
Summary:
Ref T13060. See PHI343. Triaging this bug required figuring out where in the pipeline UTF8 was being dropped, and bisecting the pipeline required making calls to Conduit.
Currently, there's no easy way to debug/inspect arbitrary Conduit calls, especially when they are `diffusion.*` calls which route to a different host (even if you have a real session and use the web console for these, you just see an HTTP service call to the target host in DarkConsole).
Add a `bin/conduit` utility to make this kind of debugging easier, with an eye toward the Phacility production cluster (or other similar clusters) specifically.
Test Plan:
- Ran `echo '{}' | bin/conduit call --method conduit.ping --input -` and similar.
- Used a similar approach to successfully diagnose the UTF8 issue in T13060.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13060
Differential Revision: https://secure.phabricator.com/D18987
Summary:
Depends on D18985. Ref T13053. See PHI125. Currently, mail attachments are just encoded onto the actual objects in the `MetaMTAMail` table.
This fails if attachments can't be encoded in JSON -- e.g., they aren't UTF8. This happens most often when revisions or commits attach patches to mail and those patches contain source code changes for files that are not encoded in UTF8.
Instead, save attachments in (and load attachments from) Files.
Test Plan: Enabled patches for mail, created a revision, saw it attach a patch. Viewed mail in web UI, saw link to download patch. Followed link, saw sensible file. Checked database, saw a `filePHID`. Destroyed mail with `bin/remove destroy`, saw attached files also destroyed.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D18986
Summary:
Depends on D18984. Ref T13053. See D13408 for the original change and why this doesn't use DestructionEngine right now. The quick version is:
- It causes us to write a destruction log, which is slightly silly (we're deleting one thing and creating another).
- It's a little bit slower than not using DestructionEngine.
However, it gets us some stuff for free that's likely relevant now (e.g., Herald Transcript cleanup) and I'm planning to move attachments to Files, but want to be able to delete them when mail is destroyed.
The destruction log is a touch silly, but those records are very small and that log gets GC'd later without generating new logs. We could silence the log from the GC if it's ever an issue.
Test Plan: Used `bin/remove destroy` and `bin/garbage collect --collector mail.sent` to destroy mail and collect garbage.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D18985
Summary: Depends on D18983. Ref T13053. Adds a new Herald action to activate the "must encrypt" flag and drop mail content.
Test Plan:
- Created a new Herald rule:
{F5407075}
- Created a "dog task" (woof woof, unsecure) and a "duck task" (quack quack, secure).
- Viewed mail for both in `bin/mail` and web UI, saw appropriate security/encryption behavior.
- Viewed "Must Encrypt" in "Headers" tab for the duck mail, saw why the mail was encrypted (link to Herald rule).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D18984
Summary:
Ref T13053. See PHI291. For particularly sensitive objects (like security issues), installs may reasonably wish to prevent details from being sent in plaintext over email.
This adds a "Must Encrypt" mail behavior, which discards mail content and all identifying details, replacing it with a link to the `/mail/` application. Users can follow the link to view the message over HTTPS.
The flag discards body content, attachments, and headers which imply things about the content of the object. It retains threading headers and headers which may uniquely identify the object as long as they don't disclose anyting about the content.
The `bin/mail list-outbound` command now flags these messages with a `#` mark.
The `bin/mail show-outbound` command now shows sent/suppressed headers and the body content as delivered (if it differs from the original body content).
The `/mail/` web UI now shows a tag for messages marked with this flag.
For now, there is no way to actually set this flag on mail.
Test Plan:
- Forced this flag on, made comments and took actions to send mail.
- Reviewed mail with `bin/mail` and `/mail/` in the web UI, saw all content information omitted.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D18983
Summary:
Ref T13057. This makes "reverts" syntax more visible and useful. In particular, you can now `Reverts Dxx` in a revision or commit, and `Reverts <hash>` from a revision.
When you do, the corresponding object will get a more-visible cross-reference marker in its timeline:
{F5405517}
From here, we can look at surfacing revert information more heavily, since we can now query it on revision/commit pages via edges.
Test Plan: Used "reverts <hash>" and "reverts <revision>" in Differential and Diffusion, got sensible results in the timeline.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13057
Differential Revision: https://secure.phabricator.com/D18978
Summary: See PHI333. Some of the cleanup at the tail end of the bulk edit changes made "Assign To" stop working properly, since we don't strip the `array(...)` off the `array(PHID)` value we receive.
Test Plan:
- Used bulk editor to assign and unassign tasks (single value datasource).
- Used bulk editor to change projects (multi-value datasource).
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18975
Summary:
Depends on D18972. Ref T13049.
Currently, the "flags" columns renders an inscrutible bitmask which you have to go hunt down in the code. Show a list of flags in human-readable text instead.
The "code" column renders a meaningless integer code. Show a text description instead.
The pull logs and push logs pages don't have a crumb to go back up out of the current query. Add one.
Test Plan: Viewed push logs, no more arcane numbers. Saw and clicked crumbs on each log page.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13049
Differential Revision: https://secure.phabricator.com/D18973
Summary:
Depends on D18971. Ref T13049. The rule is currently "you can see IP addresses for actions which affect your account".
There's some legitimate motivation for this, since it's good if you can see that someone you don't recognize has been trying to log into your account.
However, this includes cases where an administrator disables/enables your account, or promotes/demotes you to administrator. In these cases, //their// IP is shown!
Make the rule:
- Administrators can see it (consistent with everything else).
- You can see your own actions.
- You can see actions which affected you that have no actor (these are things like login attempts).
- You can't see other stuff: usually, administrators changing your account settings.
Test Plan: Viewed activity log as a non-admin, no longer saw administrator's IP address disclosed in "Demote from Admin" log.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13049
Differential Revision: https://secure.phabricator.com/D18972
Summary:
Depends on D18970. Ref T13049. Currently, the policy for viewing remote addresses is:
- In activity logs: administrators.
- In push and pull logs: users who can edit the corresponding repository.
This sort of makes sense, but is also sort of weird. Particularly, I think it's kind of hard to understand and predict, and hard to guess that this is the behavior we implement. The actual implementation is complex, too.
Instead, just use the rule "administrators can see remote addresses" consistently across all applications. This should generally be more strict than the old rule, because administrators could usually have seen everyone's address in the activity logs anyway. It's also simpler and more expected, and I don't really know of any legit use cases for the "repository editor" rule.
Test Plan: Viewed pull/push/activity logs as non-admin. Saw remote addresses as an admin, and none as a non-admin.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13049
Differential Revision: https://secure.phabricator.com/D18971
Summary: Ref T13049. This is just a general nice-to-have so you don't have to export a 300MB file if you want to check the last month of data or whatever.
Test Plan: Applied filters to all three logs, got appropriate date-range result sets.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13049
Differential Revision: https://secure.phabricator.com/D18970
Summary:
Depends on D18968. Ref T13049. Currently, if you visit `/query/?param=value`, there is no `queryKey` for the page but we build a query later on.
Right now, we incorrectly link to `/query/all/export/` in this case (and export too many results), but we should actually link to `/query/<constructed query key>/export/` to export only the desired/previewed results.
Swap the logic around a little bit so we look at the query we're actually executing, not the original URI, to figure out the query key we should use when building the link.
Test Plan: Visited a `/?param=value` page, exported data, got a subset of the full data instead of everything.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13049
Differential Revision: https://secure.phabricator.com/D18969
Summary:
Depends on D18966. Ref T13049. Adds export support to user activity logs.
These don't have PHIDs. We could add them, but just make the "phid" column test if the objects have PHIDs or not for now.
Test Plan:
- Exported user activity logs, got sensible output (with no PHIDs).
- Exported some users to make sure I didn't break PHIDs, got an export with PHIDs.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13049
Differential Revision: https://secure.phabricator.com/D18967
Summary: Depends on D18965. Ref T13049. Move this Query and SearchEngine to be a little more modern, to prepare for Export support.
Test Plan:
- Used all the query fields, viewed activity logs via People and Settings.
- I'm not sure the "Session" query is used/useful and may remove it before I'm done here, but I just left it in place for now.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13049
Differential Revision: https://secure.phabricator.com/D18966
Summary:
Ref T13049. When stuff executes asynchronously on the bulk workflow it can be hard to inspect directly, and/or a pain to test because you have to go through a bunch of steps to run it again.
Make future work here easier by making export triggerable from the CLI. This makes it easy to repeat, inspect with `--trace`, profile with `--xprofile`, etc.
Test Plan:
- Ran several invalid commands, got sensible error messages.
- Ran some valid commands, got exported data.
- Used `--xprofile` to look at the profile for a 300MB dump of 100K tasks which took about 40 seconds to export. Nothing jumped out as sketchy to me -- CustomField wrangling is a little slow but most of the time looked like it was being spent legitimately.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13049
Differential Revision: https://secure.phabricator.com/D18965
Summary:
Depends on D18961. Ref T13049. Currently, longer exports don't give the user any feedback, and exports that take longer than 30 seconds are likely to timeout.
For small exports (up to 1,000 rows) continue doing the export in the web process.
For large exports, queue a bulk job and do them in the workers instead. This sends the user through the bulk operation UI and is similar to bulk edits. It's a little clunky for now, but you get your data at the end, which is far better than hanging for 30 seconds and then fataling.
Test Plan: Exported small result sets, got the same workflow as before. Exported very large result sets, went through the bulk flow, got reasonable results out.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13049
Differential Revision: https://secure.phabricator.com/D18962
Summary:
Depends on D18960. Ref T13049. Now that Maniphest fully supports "Export Data", remove the old hard-coded version.
This is a backward compatibility break with the handful of installs that might have defined a custom export by subclassing `ManiphestExcelFormat`. I suspect this is almost zero installs, and that the additional data in the new format may serve most of the needs of this tiny number of installs. They can upgrade to `ExportEngineExtensions` fairly easily if this isn't true.
Test Plan:
- Viewed Maniphest, no longer saw the old export workflow.
- Grepped for `export` and similar strings to try to hunt everything down.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13049
Differential Revision: https://secure.phabricator.com/D18961
Summary:
Depends on D18959. Ref T13049. Provide tags, subscribers, spaces, and created/modified as automatic extensions for all objects which support them.
(Also, for JSON export, be a little more consistent about exporting `null` instead of empty string when there's no value in a text field.)
Test Plan: Exported users and tasks, saw relevant fields in the export.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13049
Differential Revision: https://secure.phabricator.com/D18960
Summary: Depends on D18958. Ref T13049. Support the new stuff. There are a couple more fields this needs to strictly improve on the old export, but I'll add them as extensions shortly.
Test Plan: Exported tasks to Excel, saw reasonble-looking data in the export.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13049
Differential Revision: https://secure.phabricator.com/D18959
Summary:
Depends on D18957. Ref T13049. To do Excel exports, PHPExcel needs to be installed on the system somewhere.
This library is enormous (1K files, ~100K SLOC), which is why we don't just include it in `externals/`. This install process is a little weird and we could improve it, but users don't seem to have too much difficulty with it. This shouldn't be worse than the existing workflow in Maniphest, and I tried to make it at least slightly more clear.
Test Plan: Uninstalled PHPExcel, got it marked "Unavailable" and got reasonably-helpful-ish guidance on how to get it to work. Reinstalled, exported, got a sheet.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13049
Differential Revision: https://secure.phabricator.com/D18958
Summary:
Depends on D18956. Ref T13049. Make the "Export Format" selector sticky.
This is partly selfish, since it makes testing format changes a bit easier.
It also seems like it's probably a good behavior in general: if you export to Excel once, that's probably what you're going to pick next time.
Test Plan: Exported to excel. Exported again, got excel as the default option.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13049
Differential Revision: https://secure.phabricator.com/D18957
Summary:
Depends on D18954. Ref T13049. This brings over the existing Maniphest Excel export pipeline in a generic way.
The `<Type>ExportField` classes know directly that `PHPExcel` exists, which is a little sketchy, but writing an Excel indirection layer sounds like a lot of work and I don't anticipate us changing Excel backends anytime soon, so trying to abstract this feels YAGNI.
This doesn't bring over the install instructions for PHPExcel or the detection of whether or not it exists. I'll bring that over in a future change.
Test Plan: Exported users as Excel, opened them up, got a sensible-looking Excel sheet.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13049
Differential Revision: https://secure.phabricator.com/D18955
Summary:
Depends on D18953. Ref T13049. Allow applications and infrastructure to supplement exportable fields for objects.
Then, implement an extension for custom fields. Only a couple field types (int, string) are supported for now.
Test Plan: Added some custom fields to Users, populated them, exported users. Saw custom fields in the export.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13049
Differential Revision: https://secure.phabricator.com/D18954
Summary:
Depends on D18952. Ref T13049. For files larger than 8MB, we need to engage the chunk storage engine. `PhabricatorFile::newFromFileData()` always writes a single chunk, and can't handle files larger than the mandatory chunk threshold (8MB).
Use `IteratorUploadSource`, which can, and "stream" the data into it. This should raise the limit from 8MB to 2GB (maximum size of a string in PHP).
If we need to go above 2GB we could stream CSV and text pretty easily, and JSON without too much trouble, but Excel might be trickier. Hopefully no one is trying to export 2GB+ datafiles, though.
Test Plan:
- Changed the JSON exporter to just export 8MB of the letter "q": `return str_repeat('q', 1024 * 1024 * 9);`.
- Before change: fatal, "no storage engine can store this file".
- After change: export works cleanly.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13049
Differential Revision: https://secure.phabricator.com/D18953
Summary:
Depends on D18951. Ref T13049. When we export to CSV or plain text, add a header row in the first line of the file to explain what each column means. This often isn't obvious with PHIDs, etc.
JSON has keys and is essentially self-labeling, so don't do anything special.
Test Plan: Exported CSV and text, saw new headers. Exported JSON, no changes.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13049
Differential Revision: https://secure.phabricator.com/D18952
Summary:
Ref T13049. All exportable objects should always have these fields, so make them builtins.
This also sets things up for extensions (like custom fields).
Test Plan: Exported user data, got the same export as before.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13049
Differential Revision: https://secure.phabricator.com/D18951
Summary: See PHI276. Ref T13048. The fix in D18933 got one callsite, but missed the one in the `callConduit()` method, so the issue isn't fully fixed in production. Convert this adapter to use a real viewer (if one is available) more thoroughly.
Test Plan: Ran rules in test console, saw field values. Will test in production again.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13048
Differential Revision: https://secure.phabricator.com/D18950
Summary: Depends on D18946. Ref T13051. Begins writing edge transactions as just a list of changed PHIDs.
Test Plan: Added, edited, and removed projects. Reviewed transaction record and database. Saw no user-facing changes but a far more compact database representation.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13051
Differential Revision: https://secure.phabricator.com/D18947
Summary:
Ref T13051. This puts a translation layer between the raw edge data in the transaction table and the UI that uses it.
The intent is to start writing new, more compact data soon. This class give us a consistent API for interacting with either the new or old data format, so we don't have to migrate everything upfront.
Test Plan: Browsed around, saw existing edge transactions render properly in transactions and feed. Added and removed subscribers and projects, saw good transaction rendering.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13051
Differential Revision: https://secure.phabricator.com/D18946
Summary: Ref T13050. Oh boy. Both of them run `grep`!
Test Plan: Will push again.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13050
Differential Revision: https://secure.phabricator.com/D18945
Summary:
Ref T13048. Fixes T11112. I mostly fixed this before in D18887, but missed that these other actions are also affected. T11112 had a more complete list of missing limits.
(It's possible there are some others somewhere, but this is everything we know about, I think.)
Test Plan: Created rules using these actions, typed stuff into the box, was only able to enter one value.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13048, T11112
Differential Revision: https://secure.phabricator.com/D18943
A recent version of Git has changed some piece of behavior here and we
now get "fatal: ssh variant 'simple' does not support setting port"
when using a port. Explicitly setting GIT_SSH_VARIANT to `ssh` likely
fixes this.
Summary:
See PHI316. Maniphest and other applications currently have controls like `Created After: [_____]` where you just get an empty text field.
Although most formats work -- including relative formats like "3 days ago" -- and we validate inputs so you get an error if you enter something nonsensical, this still isn't very user friendly.
T8060 or some other approach is likely the long term of this control.
In the meantime, add placeholder text to suggest that `YYYY-MM-DD` or `X days ago` will work.
Test Plan: Viewed date inputs, saw placeholder text.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18942
Summary:
See PHI307. Currently, when reviews undraft, we retroactively add in older activity to the mail ("alice created this revision...").
However, we don't add that activity to the mail tags, so the relevant tags (like "revision created") are dropped forever.
Instead, use the same set of transactions for both mail body and mail tag construction.
This should be obsoleted in the relatively near future by T10448, but it's a better/more correct behavior in general and we probably can't get rid of tags completely for a while.
Test Plan:
Applied patch, created a revision with builds, saw it auto-undraft after builds finished. Used `bin/mail list-outbound` and `bin/mail show-outbound` to see the mail. Verified that it included retroactive text ("created this revision") AND retroactive tags.
Note that the tag for "A new revision is created" is `DifferentialTransaction::MAILTAG_REVIEW_REQUEST` with literal value `differential-review-request`.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18941
Summary:
Depends on D18939. Ref T13047. Symbol lookup can be activated from a diff (in Differential or Diffusion) or from the static view of a file at a particular commit.
In the latter case, we need to figure out the path a little differently. The character and line number approaches still work as written.
Test Plan:
- Command-clicked symbols in the Diffusion browse view with blame on and off; saw path, line and char populate properly.
- Command-clicked symbols in Differential diff view to check I didn't break anything.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13047
Differential Revision: https://secure.phabricator.com/D18940
Summary: Depends on D18937. Ref T13047. When available, provide character positions so external indexers can return more accurate results.
Test Plan: Clicked symbols in Safari, Firefox and Chrome, got sensible-looking character positions.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13047
Differential Revision: https://secure.phabricator.com/D18939
Summary: See PHI280. We have a similar field for tasks already, this is generally a reasonable sort of thing to support, and the addition of "draft" states means there are some pretty reasonable use cases.
Test Plan:
- Wrote a status-based ("status is needs revision") Herald rule.
- Tested it against a "Needs Revision" revision (passed) and a "Changes Planned" revision (failed).
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18938
Summary:
Depends on D18936. Ref T13047. Third parties can define external symbol sources that let users jump to PHP or Python documentation or query some server.
Give these queries more information so they can try to get better results: the path and line where the symbol appeared, and any known repository scope.
Test Plan: Wrote a fake external source that used this data, command-clicked a symbol in Differential, saw a fake external symbol result.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13047
Differential Revision: https://secure.phabricator.com/D18937
Summary:
Ref T13047. In some reasonable cases, knowing the path and line number where a symbol appears is useful in ranking or filtering the set of matching symbols.
Giving symbol sources more information can't hurt, and it's generally free for us to include this context since we just need to grab it out of the document and pass it along.
We can't always get this data (for example, if a user types `s idx` into global search, we have no clue) but this is similar to other types of context which are only available sometimes (like which repository a symbol appears in).
Test Plan: Command-clicked some symbols in 1-up (unified) and 2-up (side-by-side) diff views with symbol indexes configured. Got accurate path and line information in the URI I was redirected to.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13047
Differential Revision: https://secure.phabricator.com/D18936
Summary:
Depends on D18934. Ref T13046. Add support for the new export flow to a second application.
My goal here is mostly just to make sure that this is general enough to work in more than one place, and exporting user accounts seems plausible as a useful feature, although we do see occasional requests for this feature exactly (like <https://discourse.phabricator-community.org/t/users-export-to-csv/968>).
The exported data may not truly be useful for much (no disabled/admin/verified/MFA flags, no external account data, no email addresses for policy reasons) but we can expand it as use cases arise.
Test Plan: Exported user accounts in several formats.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13046
Differential Revision: https://secure.phabricator.com/D18935
Summary:
Depends on D18918. Ref T13046. Ref T5954. Pull logs can currently be browsed in the web UI, but this isn't very powerful, especially if you have thousands of them.
Allow SearchEngine implementations to define exportable fields so that users can "Use Results > Export Data" on any query. In particular, they can use this workflow to download a file with pull logs.
In the future, this can replace the existing "Export to Excel" feature in Maniphest.
For now, we hard-code JSON as the only supported datatype and don't actually make any effort to format the data properly, but this leaves room to add more exporters (CSV, Excel) and data type awareness (integer casting, date formatting, etc) in the future.
For sufficiently large result sets, this will probably time out. At some point, I'll make this use the job queue (like bulk editing) when the export is "large" (affects more than 1K rows?).
Test Plan: Downloaded pull logs in JSON format.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13046, T5954
Differential Revision: https://secure.phabricator.com/D18919
Summary:
Depends on D18932. Ref T13048. See PHI276. In the cluster, we don't have device keys on `web` nodes. This is generally good, since they don't need them, and it means that we aren't putting more credentials than we need on those hosts.
However, it means that when we pull diff content to test "Commit" rules via the Herald test console, we use the omnipotent user and try to use device credentials, and this fails since we don't have any.
Instead, pass the real viewer in this case so we just sign the request as them, like we do for normal Diffusion requests.
Test Plan:
Wrote and ran a commit content rule locally, no issues.
This isn't completely convincing since my local setup does have device credentials, but I'll double-check in production once this deploys.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13048
Differential Revision: https://secure.phabricator.com/D18933
Summary:
Depends on D18931. Ref T13048. Ref T13041. This field means "the first accepting reviewer, where order is mostly arbitrary". Modern rules should almost certainly use "Accepting Reviewers" instead.
Getting rid of this completely is a pain, but we can at least reduce confusion by marking it as not-the-new-hotness. Add a "Deprecated" group, move it there, and mark it for exile.
Test Plan:
Edited a commit rule, saw it in "Deprecated" group at the bottom of the list:
{F5395001}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13048, T13041
Differential Revision: https://secure.phabricator.com/D18932
Summary: Depends on D18927. Ref T13048. This implements a new policy which allows Herald rules to fire on some kinds of state changes.
Test Plan:
Wrote and tested rules with the new policy:
{F5394971}
{F5394972}
Also wrote and tested rules with the old policies:
{F5394973}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13048
Differential Revision: https://secure.phabricator.com/D18930
Summary:
Depends on D18926. Ref T6203. Ref T13048. Herald rule repetition policies are stored as integers but treated as strings in most contexts.
After D18926, the integer stuff is almost totally hidden inside `HeraldRule` and getting rid of it completely isn't too tricky.
Do so now.
Test Plan:
- Created "only the first time" and "every time" rules. Did a SELECT on their rows in the database.
- Ran migrations, got a clean bill of health from `storage adjust`.
- Did another SELECT on the rows, saw a faithful conversion to strings "every" and "first".
- Edited and reviewed rules, swapping them between "every" and "first".
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13048, T6203
Differential Revision: https://secure.phabricator.com/D18927
Summary:
Depends on D18925. Ref T13048. Currently, HeraldRule stores policies as integers (0 or 1) in the database.
The application tries to mostly use strings ("first", "every"), but doesn't do a good job of hiding the fact that the values are integers deeper in the stack. So we end up with a lot of code like this:
```lang=php
$stored_int_value = $rule->getRepetitionPolicy();
$equivalent_string = HeraldRepetitionPolicyConfig::getString($stored_int_value);
$is_first = ($equivalent_string === HeraldRepetitionPolicyConfig::FIRST);
```
This happens in several places and is generally awful. Replace it with:
```lang=php
$is_first = $rule->isRepeatFirst();
```
To do this, merge `HeraldRepetitionPolicyConfig` into `HeraldRule` and hide all the mess inside the methods.
(This may let us just get rid of the integers in a later change, although I'm not sure I want to commit to that.)
Test Plan:
- Grepped for `HeraldRepetitionPolicyConfig`, no more hits.
- Grepped for `setRepetitionPolicy(...)` and `getRepetitionPolicy(...)`. There are no remaining callers outside of `HeraldRule`.
- Browed and edited several rules. I'll vet this more convincingly after adding the new repetition rule.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13048
Differential Revision: https://secure.phabricator.com/D18926
Summary:
Depends on D18924. Ref T13048. Each adapter defines which repetition options ("every time", "only the first time") users may select for rules.
Currently, this is all explicit and hard-coded. However, every adapter really just implements this rule (except for some bugs, see below):
> You can pick "only the first time" if this adapter fires more than once on the same object.
Since we already have a `isSingleEventAdapter()` method which lets us tell if an adapter fires more than once, just write this rule in the base class and delete all the copy/pasting.
This also fixes two bugs because of the copy/pasting: Pholio Mocks and Phriction Documents did not allow you to write "only the first time" rules. There's no reason for this, they just didn't copy/paste enough methods when they were implemented.
This will make a future diff (which introduces an "if the rule did not match last time" policy) cleaner.
Test Plan:
- Checked several different types of rules, saw appropriate options in the dropdown (pre-commit: no options; tasks: first or every).
- Checked mocks and wiki docs, saw that you can now write "only the first time" rules.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13048
Differential Revision: https://secure.phabricator.com/D18925
Summary: Depends on D18928. Ref T13043. Add some automated test coverage for SSH revocation rules.
Test Plan: Ran tests, got a clean bill of health.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18929
Summary:
Ref T13043. In an earlier change I updated this langauge from "Deactivate" to "Revoke", but the behavior doesn't quite match.
This table has a unique key on `<isActive, keyBody>`, which enforces the rule that "a key can only be active for one unique user".
However, we set `isActive` to `null` when we revoke a key, and multiple rows are allowed to have the value `<null, "asdf">` (since a `null` column in a unique key basically means "don't enforce this unique key").
This is intentional, to support this workflow:
- You add key X to bot A.
- Whoops, wrong account.
- You revoke key X from bot A.
- You add key X to bot B.
This isn't necessarily a great workflow -- ideally, you'd throw key X away and go generate a new key after you realize you made a mistake -- but it's the sort of practical workflow that users are likely to expect and want to see work ("I don't want to generate a new key, it's already being used by 5 other services and cycling it is a ton of work and this is just a test install for my dog anyway."), and there's no technical reason we can't support it.
To prevent users from adding keys on the revocation list back to their account, just check explicitly.
(This is probably better in general anyway, because "cert-authority" support from PHI269 may mean that two keys are "equivalent" even if their text differs, and we may not be able to rely on a database test anyway.)
Test Plan:
- Added the key `ssh-rsa asdf` to my account.
- Revoked it.
- Tried to add it again.
- Before patch: worked.
- After patch: error, "this key has been revoked".
- Added it to a different account (the "I put it on the wrong bot" workflow).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18928
Summary:
Ref T13025. See <https://discourse.phabricator-community.org/t/bulk-edit-no-actions-available/1011/1>.
I'm not sure if this is what the user is seeing, but in Chrome, the `<select />` does not automatically get set to the first valid value like it does in Safari.
Set it to the first valid value explicitly.
Test Plan: In Chrome, bulk editor previously hit a JS error when trying to read a bad action off the `<select />`. After patch, bulk edits go through cleanly.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025
Differential Revision: https://secure.phabricator.com/D18923
Summary:
Fixes T5965.
Fixes two issues:
- Observing an empty repository could write a warning to the log.
- Mirroring an empty repository to a remote could fail.
For observing:
If newly-created with `git init --bare`, `git ls-remote` will
return the empty string. Properly return an empty set of refs, rather
than attempting to parse the single "line" that is produced by
splitting that on newlines:
```
[2018-01-23 18:47:00] ERROR 8: Undefined offset: 1 at [/phab_path/phabricator/src/applications/repository/engine/PhabricatorRepositoryPullEngine.php:405]
arcanist(head=master, ref.master=5634f8410176), phabricator(head=master, ref.master=12551a1055ce), phutil(head=master, ref.master=4755785517cf)
#0 PhabricatorRepositoryPullEngine::loadGitRemoteRefs(PhabricatorRepository) called at [<phabricator>/src/applications/repository/engine/PhabricatorRepositoryPullEngine.php:343]
#1 PhabricatorRepositoryPullEngine::executeGitUpdate() called at [<phabricator>/src/applications/repository/engine/PhabricatorRepositoryPullEngine.php:126]
#2 PhabricatorRepositoryPullEngine::pullRepositoryWithLock() called at [<phabricator>/src/applications/repository/engine/PhabricatorRepositoryPullEngine.php:40]
#3 PhabricatorRepositoryPullEngine::pullRepository() called at [<phabricator>/src/applications/repository/management/PhabricatorRepositoryManagementUpdateWorkflow.php:59]
...
```
For mirroring:
`git` treats `git push --mirror` specially when a repository is empty. Detect this case by seeing if `git for-each-ref --count 1` does anything. If the repository is empty, just bail.
Test Plan:
- Observed an empty and non-empty repository.
- Mirrored an empty and non-empty repository.
Reviewers: alexmv, amckinley
Reviewed By: alexmv
Subscribers: Korvin, epriestley
Maniphest Tasks: T5965
Differential Revision: https://secure.phabricator.com/D18920
Summary: Help for GD SetupChcek was missing the "how to install extension" content.
Test Plan: Uninstalled gd, validated extension installation instructions were present in Setup Issue.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D18922
Summary:
See PHI309. There is a window of time between when all builds pass and when Harbormaster actually publishes a revision out of draft.
If any other user tries to interact with the revision during that window, they'll pick up the undraft transaction as a side effect. However, they won't have permission to apply it and will be stopped by a validation error.
Instead, only automatically publish a revision if the actor is the revision author or some system/application user (essentially always Harbormaster).
Test Plan:
- Added a `echo ...; sleep(30);` to `HarbormasterBuildEngine->updateBuildable()` before the `applyTransactions()` at the bottom.
- Wrote an "Always, run an HTTP request" Herald rule and Harbormaster build plan.
- Ran daemons with `bin/phd debug task`.
- Created a new revision with `arc diff`, as user A.
- Waited for `phd` to enter the race window.
- In a separate browser, as user B, submitted a comment via `differential.revision.edit`.
- Before patch: edits during the race window were rejected with a validation error, "you don't have permission to request review".
- After patch: edits go through cleanly.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18921
Summary: Depends on D18917. Ref T13046. While I'm in here, update this to use more modern construction.
Test Plan: Browed and queried for push logs.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13046
Differential Revision: https://secure.phabricator.com/D18918
Summary:
Depends on D18915. Ref T13046.
- Distinguish between HTTP and HTTPS.
- Use more constants and fewer magical strings.
- For HTTP responses, give them better type information and more helpful UI behaviors.
Test Plan: Pulled over SSH and HTTP. Reviewed resulting logs from the web UI. Hit errors like missing/invalid credentials.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13046
Differential Revision: https://secure.phabricator.com/D18917
Summary: Depends on D18914. Updates this Query to use slightly more modern construction while I'm working in adjacent code.
Test Plan: Viewed push logs in web UI.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18915
Summary:
Depends on D18912. Ref T13046. Add a UI to browse the existing pull log table.
The actual log still has some significant flaws, but get the basics working.
Test Plan: {F5391909}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13046
Differential Revision: https://secure.phabricator.com/D18914
Summary:
See PHI305. Ref T13046.
The SSH workflows currently extend `PhabricatorManagementWorkflow` to benefit from sharing all the standard argument parsing code. Sharing the parsing code is good, but it also means they inherit a `getViewer()` method which returns the ommnipotent viewer.
This is appropriate for everything else which extends `ManagementWorkflow` (like `bin/storage`, `bin/auth`, etc.) but not appropriate for SSH workflows, which have a real user.
This caused a bug with the pull logs where `pullerPHID` was not recorded properly. We used `$this->getViewer()->getPHID()` but the correct code was `$this->getUser()->getPHID()`.
To harden this against future mistakes:
- Don't extend `ManagementWorkflow`. Extend `PhutilArgumentWorkflow` instead. We **only** want the argument parsing code.
- Rename `get/setUser()` to `get/setSSHUser()` to make them explicit.
Then, fix the pull log bug by calling `getSSHUser()` instead of `getViewer()`.
Test Plan:
- Pulled and pushed to a repository over SSH.
- Grepped all the SSH stuff for the altered symbols.
- Saw pulls record a valid `pullerPHID` in the pull log.
- Used `echo {} | ssh ... conduit conduit.ping` to test conduit over SSH.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13046
Differential Revision: https://secure.phabricator.com/D18912
Summary:
Depends on D18908. Ref T13043. Allow users to get information about what revokers do with a new `--list` flag.
You can use `--list --type <key>` to get information about a specfic revoker.
Test Plan: Ran `bin/auth revoke --list`, saw a list of revokers with useful information.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18910
Summary:
Depends on D18907. Ref T13043. Ref T12509. We have some weird old password digest behavior that isn't terribly concerning, but also isn't great.
Specifically, old passwords were digested in weird ways before being hashed. Notably, account passwords were digested with usernames, so your password stops working if your username is chagned. Not the end of the world, but silly.
Mark all existing hashes as "v1", and automatically upgrade then when they're used or changed. Some day, far in the future, we could stop supporting these legacy digests and delete the code and passwords and just issue upgrade advice ("Passwords which haven't been used in more than two years no longer work."). But at least get things on a path toward sane, modern behavior.
Test Plan: Ran migration. Spot-checked that everthing in the database got marked as "v1". Used an existing password to login successfully. Verified that it was upgraded to a `null` (modern) digest. Logged in with it again.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043, T12509
Differential Revision: https://secure.phabricator.com/D18908
Summary:
Depends on D18906. Ref T13043. When SSH keys are edited, we normally include a warning that if you don't recognize the activity you might have problems in the mail body.
Currently, this warning is also shown for revocations with `bin/auth revoke --type ssh`. However, these revocations are safe (revocations are generally not dangerous anyway) and almost certainly legitimate and administrative, so don't warn users about them.
Test Plan:
- Created and revoked a key.
- Creation mail still had warning; revocation mail no longer did.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18907
Summary:
Depends on D18904. Ref T13043. If an attacker compromises a victim's session and bypasses their MFA, they can try to guess the user's current account password by making repeated requests to change it: if they guess the right "Old Password", they get a different error than if they don't.
I don't think this is really a very serious concern (the attacker already got a session and MFA, if configured, somehow; many installs don't use passwords anyway) but we get occasional reports about it from HackerOne. Technically, it's better policy to rate limit it, and this should reduce the reports we receive.
Test Plan: Tried to change password over and over again, eventually got rated limited. Used `bin/auth unlimit` to clear the limit, changed password normally without issues.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18906
Summary:
Ref T13043. After D18903, this data has migrated to shared infrastructure and has no remaining readers or writers.
Just delete it now, since the cost of a mistake here is very small (users need to "Forgot Password?" and pick a new password).
Test Plan: Grepped for `passwordHash`, `passwordSalt`, and variations.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18904
Summary:
Ref T13043. This moves user account passwords to the new shared infrastructure.
There's a lot of code changes here, but essentially all of it is the same as the VCS password logic in D18898.
Test Plan:
- Ran migration.
- Spot checked table for general sanity.
- Logged in with an existing password.
- Hit all error conditions on "change password", "set password", "register new account" flows.
- Verified that changing password logs out other sessions.
- Verified that revoked passwords of a different type can't be selected.
- Changed passwords a bunch.
- Verified that salt regenerates properly after password change.
- Tried to login with the wrong password, which didn't work.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18903
Summary:
Ref T13045. See that task for discussion.
This replaces `digestForIndex()` with a "clever" algorithm in `digestForAnchor()`. The new digest is the same as `digestForIndex()` except when the original output was "." or "_". In those cases, a replacement character is selected based on entropy accumulated by the digest function as it iterates through the string.
Test Plan: Added unit tests.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13045
Differential Revision: https://secure.phabricator.com/D18909
Summary:
Ref T13043. We have ~4 copies of this logic (registration, lost password recovery, set password, set VCS password).
Currently it varies a bit from case to case, but since it's all going to be basically identical once account passwords swap to the new infrastructure, bring it into the Engine so it can live in one place.
This also fixes VCS passwords not being affected by `account.minimum-password-length`.
Test Plan: Hit all errors in "VCS Password" panel. Successfully changed password.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18902
Summary:
Ref T13043. This cleans some things up to prepare for moving account passwords to shared infrastructure.
Currently, the (very old, fairly unusual) `bin/accountadmin` tool can set account passwords. This is a bit weird, generally not great, and makes upgrading to shared infrastructure more difficult. Just get rid of this to simplify things. Many installs don't have passwords and this is pointless and unhelpful in those cases.
Instead, let `bin/auth recover` recover any account, not just administrator accounts. This was a guardrail against administrative abuse, but it has always seemed especially flimsy (since anyone who can run the tool can easily comment out the checks) and I use this tool in cluster support with some frequency, occasionally just commenting out the checks. This is generally a better solution than actually setting a password on accounts anyway. Just get rid of the check and give users enough rope to shoot themselves in the foot with if they truly desire.
Test Plan:
- Ran `bin/accountadmin`, didn't get prompted to swap passwords anymore.
- Ran `bin/auth recover` to recover a non-admin account.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18901
Summary:
Ref T13043. In D18898 I moved VCS passwords to the new shared infrastructure.
Before account passwords can move, we need to make two changes:
- For legacy reasons, VCS passwords and Account passwords have different "digest" algorithms. Both are more complicated than they should be, but we can't easily fix it without breaking existing passwords. Add a `PasswordHashInterface` so that objects which can have passwords hashes can implement custom digest logic for each password type.
- Account passwords have a dedicated external salt (`PhabricatorUser->passwordSalt`). This is a generally reasonable thing to support (since not all hashers are self-salting) and we need to keep it around so existing passwords still work. Add salt support to `AuthPassword` and make it generate/regenerate when passwords are updated.
Then add a nice story about password digestion.
Test Plan: Ran migrations. Used an existing VCS password; changed VCS password. Tried to use a revoked password. Unit tests still pass. Grepped for callers to legacy `PhabricatorHash::digestPassword()`, found none.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18900
Summary:
Ref T13043. After D18898, this has been migrated to new, more modern storage and no longer has any readers or writers.
One migration from long ago (early 2014) is affected. Since this is ancient and the cost of dropping this is small (see inline), I just dropped it.
I'll note this in the changelog.
Test Plan: Ran migrations, got a clean bill of health from `storage status`. Grepped for removed symbol.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18899
Summary:
Ref T13043. Migrate VCS passwords away from their dedicated table to new the new shared infrastructure.
Future changes will migrate account passwords and remove the old table.
Test Plan:
- Ran migrations.
- Cloned with the same password that was configured before the migrations (worked).
- Cloned with a different, invalid password (failed).
- Changed password.
- Cloned with old password (failed).
- Cloned with new password (worked).
- Deleted password in web UI.
- Cloned with old password (failed).
- Set password to the same password as it currently is set to (worked, no "unique" collision).
- Set password to account password. !!This (incorrectly) works for now until account passwords migrate, since the uniqueness check can't see them yet.!!
- Set password to a new unique password.
- Cloned (worked).
- Revoked the password with `bin/auth revoke`.
- Verified web UI shows "no password set".
- Verified that pull no longer works.
- Verified that I can no longer select the revoked password.
- Verified that accounts do not interact:
- Tried to set account B to account A's password (worked).
- Tried to set account B to a password revoked on account A (worked).
- Spot checked the `password` and `passwordtransaction` tables for saniity.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18898
Summary:
Ref T13043. When we verify a password and a better hasher is available, we automatically upgrade the stored hash to the stronger hasher.
Add test coverage for this workflow and fix a few bugs and issues, mostly related to shuffling the old hasher name into the transaction.
This doesn't touch anything user-visible yet.
Test Plan: Ran unit tests.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18897
Summary:
Ref T13043. This provides a new piece of shared infrastructure that VCS passwords and account passwords can use to validate passwords that users enter.
This isn't reachable by anything yet.
The test coverage of the "upgrade" flow (where we rehash a password to use a stronger hasher) isn't great in this diff, I'll expand that in the next change and then start migrating things.
Test Plan: Added a bunch of unit tests.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18896
Summary: Ref T13043. I'd like to replace the manual credential revocation in the Phacility export workflow with shared code in `bin/auth revoke`, but we need it to run non-interactively. Add a `--force` flag purely to make our lives easier.
Test Plan: Ran `bin/auth revoke --everywhere ...` with and without `--force`. Got prompted without, got total annihilation with.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18895
Summary:
Ref T13043. Currently:
- Passwords are stored separately in the "VCS Passwords" and "User" tables and don't share as much code as they could.
- Because User objects are all over the place in the code, password hashes are all over the place too (i.e., often somewhere in process memory). This is a very low-severity, theoretical sort of issue, but it could make leaving a stray `var_dump()` in the code somewhere a lot more dangerous than it otherwise is. Even if we never do this, third-party developers might. So it "feels nice" to imagine separating this data into a different table that we rarely load.
- Passwords can not be //revoked//. They can be //deleted//, but users can set the same password again. If you believe or suspect that a password may have been compromised, you might reasonably prefer to revoke it and force the user to select a //different// password.
This change prepares to remedy these issues by adding a new, more modern dedicated password storage table which supports storing multiple password types (account vs VCS), gives passwords real PHIDs and transactions, supports DestructionEngine, supports revocation, and supports `bin/auth revoke`.
It doesn't actually make anything use this new table yet. Future changes will migrate VCS passwords and account passwords to this table.
(This also gives third party applications a reasonable place to store password hashes in a consistent way if they have some need for it.)
Test Plan: Added some basic unit tests to cover general behavior. This is just skeleton code for now and will get more thorough testing when applications move.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18894
Summary: Ref T13043. Adds CLI support for revoking SSH keys. Also retargets UI language from "Deactivate" to "Revoke" to make it more clear that this is a one-way operation. This operation is already correctly implemented as a "Revoke" operation.
Test Plan: Used `bin/auth revoke --type ssh` to revoke keys, verified they became revoked (with proper transactions) in the UI. Revoked keys from the web UI flow.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18893
Summary: Ref T13043. Allows CLI revocation of login sessions.
Test Plan: Used `bin/auth revoke --type session` with `--from` and `--everywhere` to revoke sessions. Saw accounts get logged out in web UI.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18892
Summary: Ref T13025. Fixes T10973. Fairly straightforward. The "points" type is just an alias for "text" today.
Test Plan: Bulk edited points.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025, T10973
Differential Revision: https://secure.phabricator.com/D18889
Summary: Ref T13025. This makes limits (for fields like "Assign To") work in the bulk editor, so you can't type "Assign to: x, y, z" anymore.
Test Plan: Hit limit for "Assign to" and a custom project field. No limit for "Add subscribers".
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025
Differential Revision: https://secure.phabricator.com/D18888
Summary:
See PHI173. Currently, Herald has an "Assign to" action for tasks, and you can specify custom fields with datasource values (like users or projects) that have a limit (like 1 "Owner", or 12 "Jury Members").
Herald doesn't support these limits right now, so you can write `[ Assign to ][ X, Y, Z ]`. This just means "Assign to X", but make it more clear by actually enforcing the limit in the UI.
Test Plan:
- Created a "projects" custom field with limit 1.
- Tried to create actions that 'assign to' or 'set custom field to' more than one thing, got helpfully rebuffed by the UI.
- Created an "add subscribers" action with more than one value.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18887
Summary:
See <https://discourse.phabricator-community.org/t/files-created-from-repository-contents-slightly-over-one-chunk-in-size-are-truncated-to-exactly-one-chunk-in-size/988/1>. Three issues here:
- When we finish reading `git cat-file ...` or whatever, we can end up with more than one chunk worth of bytes left in the internal buffer if the read is fast. Use `while` instead of `if` to make sure we write the whole buffer.
- Limiting output with `setStdoutSizeLimit()` isn't really a reliable way to limit the size if we're also reading from the buffer. It's also pretty indirect and confusing. Instead, just let the `FileUploadSource` explicitly implement a byte limit in a straightforward way.
- We weren't setting the time limit correctly on the main path.
Overall, this could cause >4MB files to "write" as 4MB files, with the rest of the file left in the UploadSource buffer. Since these files were technically under the limit, they could return as valid. This was intermittent.
Test Plan:
- Pushed a ~4.2MB file.
- Reloaded Diffusion a bunch, sometimes saw the `while/if` buffer race and produce a 4MB file with a prompt to download it. (Other times, the buffer worked right and the page just says "this file is too big, sorry").
- Applied patches.
- Reloaded Diffusion a bunch, no longer saw bad behavior or truncated files.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18885
Summary:
See PHI287. Currently, you can't get very much information about a task in the worker queue from the web UI.
This is largely intentional (e.g., it's bad if we let you inspect the content of a "send an administrator's password reset email" task), and a lot of the data is task-class specific so it would be a lot of work to expose it, but we can add one useful piece of information pretty easily: for tasks with an `objectPHID` that points at a valid object that's visible to the user, tell the user which object the task is associated with.
Test Plan: {F5386562}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18890
Summary: See PHI292. This is just a generalization of D18851: feed stories have the same issue as mail. Don't hide "requested a review" in either mail or feed.
Test Plan:
- Enable prototypes.
- No harbormaster builds.
- Create a revision.
- Pre-patch: no feed story.
- Post-patch: feed story.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18886
Summary:
Fixes T13040. To reproduce:
- View a file with blame enabled, where some line has an associated revision (say, `D123`).
- Edit `D123` so it exists and is a valid revision, but the viewer can't see it.
- Reload the page.
Instead, only add revisions to the map if we actually managed to load them.
Test Plan: Page no longer fatals.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13040
Differential Revision: https://secure.phabricator.com/D18884
Summary:
Fixes T13042. This hooks up the new "silent" mode from D18882 and makes it actually work.
The UI (where we tell you to go run some command and then reload the page) is pretty clumsy, but should solve some problems for now and can be cleaned up eventually. The actual mechanics (timeline aggregation, Herald interaction, etc.) are on firmer ground.
Test Plan:
- Made a normal bulk edit, got mail and feed stories.
- Made a silent bulk edit, no mail and no feed.
- Saw "Silent Edit" marker in timeline for silent edits:
{F5386245}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13042
Differential Revision: https://secure.phabricator.com/D18883
Summary:
Ref T13042. This adds a "silent" edit mechanism which suppresses feed stories, email, and notifications.
The other behaviors here are:
- The transactions are marked as "silent" so we can render a hint in the UI in the future to make it clear to users that they aren't missing email.
- If the editor uses Herald, mail rules are suppressed so they don't fire incorrectly (this mostly affects "the first time this rule matches, send me an email" rules: without this, they'd match "the first time" on the bulk edit, not send email, then never match again since they already matched).
- If the edit queues additional edits, those are applied silently too.
This doesn't (or, at least, shouldn't) actually change any behavior since you can't apply silent edits yet.
Test Plan:
Somewhat theoretical, since this isn't reachable yet. Should get meaningful testing in an upcoming change.
Did a bit of var_dump() / debug poking to attempt to verify that nothing too crazy is happening.
Viewed and edited objects, no changes in behavior.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13042
Differential Revision: https://secure.phabricator.com/D18882
Summary:
Ref T13042. This is a very, very old policy-violating option from yesteryear which supported build systems publishing updates by adding comments to revisions, without sending email about it.
Harbormaster has served this role for a long time and this is policy-violating in the general case (it allows attackers to act in secret).
Test Plan: Grepped for affected symbols.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13042
Differential Revision: https://secure.phabricator.com/D18881
Summary: Ref T13025. We're getting kind of a lot of actions, so put them in nice groups so they're easier to work with.
Test Plan: {F5386038}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025
Differential Revision: https://secure.phabricator.com/D18880
Summary:
Ref T13025. This is some minor technical stuff: make the "select" bulk edit type a little more consistent with other types by passing data down instead of having it reach up the stack. This simplifies the implementation of a custom field "select" in a future change.
Also, provide an option list to the "select" edit field for object subtypes. This is only accessible via Conduit so it currently never actually renders anything in the UI, but with the bulk edit stuff we get some initialization order issues if we don't set anything. This will also make any future changes which expose subtypes more broadly more straightforward.
Test Plan:
- Bulk edited "select" fields, like "Status" and "Priority".
- No more fatal when trying to `getOptions()` internally on the subtype field.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025
Differential Revision: https://secure.phabricator.com/D18878
Summary:
Ref T13025. Custom field transactions work somewhat unusually: the values sometimes need to be encoded. We currently do not apply this encoding correctly via Conduit.
For example, setting some custom PHID field to `["PHID-X-Y"]` fails with a bunch of JSON errors.
Add an extra hook callback so that EditTypes can apply processing to transaction values, then apply the correct CustomField processing.
This only affects Conduit. In a future diff, this also allows bulk edit of custom fields to work correctly.
Test Plan: Added a custom field to Maniphest with a list of projects. Used Conduit to bulk edit it (which now works, but did not before). Used the web UI to bulk edit it.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025
Differential Revision: https://secure.phabricator.com/D18876
Summary:
Ref T13025. Currently, the bulk editor takes an HTTP request and emits a list of "raw" transactions (simple dictionaries). This goes into the job queue, and the background job builds a real transaction.
However, the logic to turn an HTTP request into a raw transaction is ending up with some duplication, since we generally already have logic to turn an HTTP request into a full object.
Instead: build real objects first, then serialize them to dictionaries. Send those to the job queue, rebuild them into objects again, and we end up in the same spot with a little less code duplication.
Finally, delete the mostly-copied code.
Test Plan: Used bulk editor to add comments, projects, and rename tasks.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025
Differential Revision: https://secure.phabricator.com/D18875
Summary:
Ref T13025. See PHI173. This supports the "Assign to" field in the new editor.
This is very slightly funky: to unassign tasks, you need to leave the field blank. I have half a diff to fix this, but the way the `none()` token works in the default datasource is odd so it needs a separate datasource. I'm punting on this for now since it works, at least, and isn't //completely// unreasonable.
This also simplifies some EditEngine stuff a little. Notably:
- I reorganized EditType construction slightly so subclasses can copy/paste a little bit less.
- EditType had `field` and `editField` properties which had the same values. I canonicalized on `editField` and made this value set a little more automatically.
Test Plan: Used bulk editor to reassign some tasks. By leaving the field blank, unassigned tasks.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025
Differential Revision: https://secure.phabricator.com/D18874
Summary: Depends on D18867. Ref T13025. Fixes T8740. Rebuilds the tag/subscriber actions (add, remove, set) into the bulk editor.
Test Plan: Added, removed and set these values via bulk edit.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025, T8740
Differential Revision: https://secure.phabricator.com/D18868
Summary:
Depends on D18866. Ref T13025. Fixes T12415. This makes the old "Add Comment" action work, and adds support for a new "Set description to" action (possibly, I could imagine "append description" being useful some day, maybe).
The implementation is just a `<textarea />`, not a whole fancy remarkup box with `[Bold] [Italic] ...` buttons, preview, typeaheads, etc. It would be nice to enrich this eventually but doing the rendering in pure JS is currently very involved.
This requires a little bit of gymnastics to get the transaction populated properly, and adds some extra validation since we need some code there anyway.
Test Plan:
- Changed the description of a task via bulk editor.
- Added a comment to a task via bulk editor.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025, T12415
Differential Revision: https://secure.phabricator.com/D18867
Summary: Depends on D18864. Ref T13025. Adds bulk edit support back for "status" and "priority" using `<select />` controls.
Test Plan:
Used bulk editor to change status and priority for tasks.
{F5374436}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025
Differential Revision: https://secure.phabricator.com/D18866
Summary: Depends on D18863. Ref PHI173. Ref T13025. After D18863, this job type is no longer used: the workflow uses a genric worker instead which can apply transactions to any object.
Test Plan: Grepped for callsites, found none.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025
Differential Revision: https://secure.phabricator.com/D18864
Summary:
Depends on D18862. See PHI173. Ref T13025. Fixes T10005. This redefines bulk edits in terms of EditEngine fields, rather than hard-coding the whole thing.
Only text fields -- and, specifically, only the "Title" field -- are supported after this change. Followup changes will add more bulk edit parameter types and broader field support.
However, the title field now works without any Maniphest-specific code, outside of the small amount of binding code in the `ManiphestBulkEditor` subclass.
Test Plan: Used the bulk edit workflow to change the titles of tasks.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025, T10005
Differential Revision: https://secure.phabricator.com/D18863
Summary:
Depends on D18806. Ref T13025. See PHI173. Currently, Maniphest bulk edits are processed by a Maniphest-specific worker. I want to replace this with a generic worker which can apply transactional edits to any object.
This implements a generic worker, although it has no callers yet. Future changes give it callers, and later remove the Maniphest-specific worker.
Test Plan: See next changes.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025
Differential Revision: https://secure.phabricator.com/D18862
Summary:
Depends on D18805. Ref T13025. Fixes T10268.
Instead of using a list of IDs for the bulk editor, power it with SearchEngine queries. This gives us the full power of SearchEngine and lets us use a query key instead of a list of 20,000 IDs to avoid issues with URL lengths.
Also, split it into a base `BulkEngine` and per-application subclasses. This moves us toward T10005 and universal support for bulk operations.
Also:
- Renames most of "batch" to "bulk": we're curently inconsitent about this, I like "bulk" better since I think it's more clear if you don't regularly interact with `.bat` files, and newer stuff mostly uses "bulk".
- When objects in the result set can't be edited because you don't have permission, show the status more clearly.
This probably breaks some stuff a bit since I refactored so heavily, but it seems mostly OK from poking around. I'll clean up anything I missed in followups to deal with remaining items on T13025.
Test Plan:
{F5302300}
- Bulk edited from Maniphest.
- Bulk edited from a workboard (no more giant `?ids=....` in the URL).
- Hit most of the error conditions, I think?
- Clicked the "Cancel" button.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025, T10268
Differential Revision: https://secure.phabricator.com/D18806
Summary:
Ref T13025. See PHI50. Fixes T11286. Ref T10005. Begin modernizing the bulk editor.
For T10005 ("move the bulk editor to modern infrastructure"), rewrite the rendering of the editable set so that it is application-agnostic and can work with any kind of object.
For T11286 ("let users de-select items in the working set"), make the working set editable.
Test Plan:
{F5302158}
- Deselected some objects, applied an edit, saw the edit apply to only selected objects.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025, T11286, T10005
Differential Revision: https://secure.phabricator.com/D18805
Summary: See PHI273. Third time's the charm? This page has a "Project" filter which lets you view data for only one project, but the synthetic data currently ignores it.
Test Plan: Filtered burnup chart by various projects, saw sensible-looking data.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18860
Summary: See D18857. Ref T13036. See PHI275. Explain what's going on here a little better since it isn't entirely obvious and debugging these stream parsers is a gigantic pain.
Test Plan: Read text.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13036
Differential Revision: https://secure.phabricator.com/D18859
Summary:
Ref T13020. See PHI273. See D18853. On `secure`, the chart looks less promising than it did locally, and is full of discontinuities:
{F5356544}
I think this is a sorting issue. But if I can't fake my way through this soon I'll maybe get the Fact engine running and use it to provide the data here, as a sort of half-step toward T1562?
Test Plan: Chart looks the same locally, will push and see if `secure` improves?
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13020
Differential Revision: https://secure.phabricator.com/D18854
Summary:
Depends on D18856. Ref T13036. See PHI275. When we receive a length frame but the buffer doesn't have any data yet, we currently emit a pointless 0-length data frame on the channel.
For normal chatter this is harmless/valid, but it causes problems when a channel has transitioned into bundle2 mode (probably it indicates "end of stream")?
In any case, it's never helpful, so if we're about to read a data block and don't have any data, just bail out until we see some more data.
Note that we can't end up here //expecting// a 0-length data block: both the `data-length` and `data-bytes` states already handle that properly.
Test Plan: Pushed 4MB changes to a Mercurial repository with Mercurial 4.1.1, was no longer able to hit channel errors.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13036
Differential Revision: https://secure.phabricator.com/D18857
Summary:
Depends on D18855. Ref T13036. This comment no longer seems to be accurate: anything we send over `stderr` is faithfully shown to the user with recent clients.
From [[ https://www.mercurial-scm.org/repo/hg/file/default/mercurial/help/internals/wireprotocol.txt | this document ]], the missing sauce may have been:
```
A generic error response type is also supported. It consists of a an error
message written to ``stderr`` followed by ``\n-\n``. In addition, ``\n`` is
written to ``stdout``.
```
That is, writing "\n" to stdout in addition to writing the error to stderr. However, this no longer appears to be necessary.
I think the modern client behavior is generally sensible (and consistent with the behavior of Git and Subversion) so this //probably// isn't a bug or me making a mistake.
Test Plan: With a modern client, threw some arbitrary exception during execution. Observed a helpful message on the client with no additional steps.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13036
Differential Revision: https://secure.phabricator.com/D18856
Summary:
Ref T13036. This code attempts to filter the "capabilities" message to remove "bundle2", but I think this has never worked.
Specifically, the //write// pathway is hooked, and "write" here means "client is writing a message to the server". However, the "capabilities" frame is part of the response, not part of the request. Thus, this code never fires, at least on recent versions of Mercurial.
Since I plan to support bundle2 and don't want to decode response frames, just get rid of this, assuming we'll achieve those goals.
I think this was just overlooked in D14241, which probably focused on the HTTP version. This code does (at least, potentially) do something for HTTP.
I'm leaving the actual "strip stuff" code in place for now since I think it's still used on the HTTP pathway.
Test Plan:
- Added debug logging, saw this code never hit even though `hg push --debug` shows the client believing bundle2 is supported.
- Logged both halves of the wire protocol and saw this come from the server, not the client.
- Ran the failing `hg push` of a 4MB file under hg 4.4.1, got the same error as before.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: cspeckmim
Maniphest Tasks: T13036
Differential Revision: https://secure.phabricator.com/D18855
Summary:
Depends on D18848. Ref PHI243. This puts a bit of logic up front to figure out the blueprint type before we actually start editing it.
This implementation is a little messy but it keeps the API clean. Eventually, the implementation could probably go in the TransactionTypes so more code is shared, but I'd like to wait for a couple more of these first.
This capability probably isn't too useful, but just pays down a bit of technical debt from the caveat introduced in D18822.
Test Plan:
- Created a new blueprint with the API.
- Tried to create a blueprint without a "type" (got a helpful error).
- Created and edited blueprints via the web UI.
- Tried to change the "type" of an existing blueprint (got a helpful error).
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D18849
Summary:
Depends on D18845. See PHI243 for context and more details.
Briefly, some objects need a "type" transaction (or something similar) very early on, and we can't generate their fields until we know the object type. Drydock blueprints are an example: a blueprint's fields depend on the blueprint's type.
In web interfaces, the workflow just forces the user to select a type first. For Conduit workflows, I think the cleanest approach is to proactively extract and apply type information before processing the request. This will make the implementation a little messier, but the API cleaner.
An alternative is to add more fields to the API, like a "type" field. This makes the implementation cleaner, but the API messier. I think we're better off favoring a cleaner API here.
This change just makes it possible for `DrydockBlueprintEditEngine` to look at the incoming transactions and extract a "type"; it doesn't actually change any behavior.
Test Plan: Performed edits via API, but this change doesn't alter any behavior.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18847
Summary: Ref PHI243. This is a followup to D18822, which added an edit-only `drydock.blueprint.edit`. By modularizing transactions (here) and then adding a "type" transaction (next change) I intend to remove the "edit-only" limitation and make this API method fully functional.
Test Plan: Created and edited blueprints via the web UI. Edited blueprints via the API. Disabled/enabled blueprints (currently web UI only).
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D18845
Summary:
Fixes T13031. "Enormous" changes are basically changes which are too large to hold in memory, although the actual definition we use today is "more than 1GB of change text or `git diff` runs for more than 15 minutes".
If an install configures a Herald content rule like "when content matches /XYZ/, do something" and then a user pushes a 30 GB source file, we can't put it into memory to `preg_match()` it. Currently, the way to handle this case is to write a separate Herald rule that rejects enormous changes. However, this isn't obvious and means the default behavior is unsafe.
Make the default behavior safe by rejecting these changes with a message, similar to how we reject "dangerous" changes (which permanently delete or overwrite history) by default.
Also, change a couple of UI strings from "Enormous" to "Very Large" to reduce ambiguity. See <https://discourse.phabricator-community.org/t/herald-enormous-check/822>.
Test Plan: Changed the definition of "enormous" from 1GB to 1 byte. Pushed a change; got rejected. Allowed enormous changes, pushed, got rejected by a Herald rule. Disabled the Herald rule, pushed, got a clean push. Prevented enormous changes again. Grepped for "enormous" elsewhere in the UI.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: joshuaspence
Maniphest Tasks: T13031
Differential Revision: https://secure.phabricator.com/D18850
Summary:
See PHI273. Ref T13020. After D18777, tasks created directly into the default status (which is common) via the web UI no longer write a "status" transaction.
This is consistent with other applications, and consistent with the API/email behavior for tasks since early 2016. It also improves the consistency of //reading// tasks via the API.
However, it impacted the "Burnup Report" which relies on directly reading these rows to detect task creation. Until this is fixed properly (T1562), synthetically generate the "missing" transactions which this page expects by looking at task creation dates instead.
Specifically, we:
- Generate a fake `status: null -> "open"` transaction for every task by looking at the Task table.
- Go through the transaction list and remove all the legacy `status: null -> "any open status"` transactions. These will only exist for older tasks.
- Merge all our new fake transactions into the list of transactions.
- Continue on as though nothing happened, letting the rendering code continue to operate on legacy-looking data.
I think this will slightly miscount tasks which were created directly into a closed status, but this is very rare, and does not significantly impact the accuracy of this report relative to other known issues (notably, merging closed tasks).
This will also get the wrong result if the default status has changed from an "open" status to a "closed" status at any point, but this is exceptionally bizarre/rare.
Ultimately, T1562 will let us delete all this stuff and disavow its existence.
Test Plan:
- Created some tasks, loaded burnup before/after this patch.
- My local chart looks more accurate afterwards, but the data is super weird (I used `bin/lipsum` to create a huge number of tasks a couple months ago). I'll vet this on `secure`, which has more reasonable data.
Here's my local chart:
{F5356499}
That's what it //should// look like, it's just hard to be confident that nothing else is hiding there.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13020
Differential Revision: https://secure.phabricator.com/D18853
Summary:
Depends on D18851. Ref T13035. After D18819, revision creation transactions may be split into two groups (if prototypes are enabled).
This split means we have two workers. The first worker doesn't publish feed stories or mail; the second one does.
Currently, both workers call `shouldPublishFeedStory()` before they queue, and then again after the daemons pull them out of the queue. However, the answer to this question can change.
Specifically, this happens:
- `arc` creates a revision.
- The first transaction group applies, creating the revision as a draft, and returns `false` from `shouldPublishFeedStory()`, and does not generate related PHIDs. It queues a daemon to send mail, expecting it not to publish a feed story.
- The second transaction group applies, promoting the revision to "needs review". Since the revision has promoted, `shouldPublishFeedStory()` now returns true. This editor generates related PHIDs and queues a daemon task, expecting it to send mail / publish feed.
- A few milliseconds pass.
- The first job gets pulled out of the daemon queue and worked on. It does not have any feed metadata because the object wasn't publishable when the job was queued -- but `shouldPublishFeedStory()` now returns true, so it tries to publish a story without any metadata available. Slightly bad stuff happens (see below).
- The second job gets pulled out of the daemon queue and worked on. This one has metadata and works fine.
The "slightly bad stuff" is that we publish an empty feed story with no references to any objects, then try to push it to hooks and other listeners. Since it doesn't have any references, it fails to load during the "push to external listeners" phase.
This is harmless but clutters the log and doesn't help anything.
Instead, cache the state of "are we publishing a feed story for this object?" when we queue the worker so it can't race.
Test Plan:
- Enabled prototypes.
- Disabled all Herald triggers for Harbormaster build plans.
- Ran `bin/phd debug task` in one window.
- Created a revision in a separate window.
- Before patch: saw "unable to load feed story" errors in the daemon log.
- After patch: no more "unable to load feed story" errors.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13035
Differential Revision: https://secure.phabricator.com/D18852
Summary: Ref T13035. See that task for a description of the issue.
Test Plan:
- Enabled prototypes.
- Disabled all Herald rules that trigger Harbormaster builds.
- Created a new revision.
- Before patch: initial review request email was dropped.
- After patch: initial review request email is sent.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13035
Differential Revision: https://secure.phabricator.com/D18851
Summary:
See PHI262. Fixes T12578. Although this is a bit niche and probably better accomplished through advisory/soft measures ("Add blocking reviewers") in most cases, it isn't difficult to implement and doesn't create any technical or product tension.
If installs write a rule that blocks commits, that will probably also naturally lead them to an "add reviewers" rule anyway.
Also, allow packages to be hit with the typeahead. They're valid reviewers but previously you couldn't write rules against them, for no actual reason.
Test Plan: Used test console to run this against commits, got sensible results for the field value.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12578
Differential Revision: https://secure.phabricator.com/D18839
Summary:
See PHI223. Ref T13024. There's a remaining registration/login order issue after the other changes in T13024: we lose track of the current URI when we go through the MFA flow, so we can lose "Set Password" at the end of the flow.
Specifically, the flow goes like this today:
- User clicks the welcome link in email.
- They get redirected to the "set password" settings panel.
- This gets pre-empted by Legalpad (although we'll potentially survive this with the URI intact).
- This also gets pre-empted by the "Set MFA" workflow. If the user completes this flow, they get redirected to a `/auth/multifactor/?id=123` sort of URI to highlight the factor they added. This causes us to lose the `/settings/panel/password/blah/blah?key=xyz` URI.
The ordering on this is also not ideal; it's preferable to start with a password, then do the other steps, so the user can return to the flow more easily if they are interrupted.
Resolve this by separating the "change your password" and "set/reset your password" flows onto two different pages. This copy/pastes a bit of code, but both flows end up simpler so it feels reasonable to me overall.
We don't require a full session for "set/reset password" (so you can do it if you don't have MFA/legalpad yet) and do it first.
This works better and is broadly simpler for users.
Test Plan:
- Required MFA + legalpad, invited a user via email, registered.
- Before: password set flow got lost when setting MFA.
- After: prompted to set password, then sign documents, then set up MFA.
- Reset password (with MFA confgiured, was required to MFA first).
- Tried to reset password without a valid reset key, wasn't successful.
- Changed password using existing flow.
- Hit various (all?) error cases (short password, common password, mismatch, missing password, etc).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13024
Differential Revision: https://secure.phabricator.com/D18840
Summary:
Ref PHI261. This moves Harbormaster build status to work more similarly to other modern status types, like Differential revision status, where we try to specify as much behavior on the server as possible so that the client and server can vary independently.
(I don't have any specific plans to make Harbormaster build status configurable on the server side, but it isn't out of the question.)
Test Plan: Ran `harbormaster.querybuilds` (saw same data as before) and `harbormaster.build.search` (saw same data as before, plus new ANSI color data).
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D18838
Summary: This probably isn't the best solution, however, it conveniently avoids the bug from T13033. It would probably be more user-friendly (but more difficult to implement) if we allowed either Project Details //or// Workboard to be hidden but not both.
Test Plan: Tested locally, indeed this prevents hiding the menu item.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18836
Summary:
Fixes T13033. Currently (prior to D18836) all the default items for projects can be hidden. When this occurs, the main project page fatals.
If we fix the fatal narrowly (don't try to call `null->getBuiltinKey()` when `$default` is `null`), it would 404, which is a little better but not by much.
After D18836 you can't hide "Profile", which is pretty sensible, and effectively fixes this. This change doubles down: let "Manage" be a default, and send the user there if we can't find a different default.
Ideally, the MenuEngine itself will do more rendering eventually (as it does for some of the newer Home stuff) and could handle this defaulting behavior with less special casing, but we'd still end up in a similar situation if a project had only one "Link" item to "coolcats.com" or something: redirecting the user to "coolcats.com" is probably better than fataling, but not by a huge margin, and not likely to be what they expect.
Test Plan:
Before D18836, disabled both "Profile" and "Workboard" items on a project. Visited project page.
Before patch: fatal. After patch: manage page.
After D18836, you can't do this and just get the profile, so this is sort of moot and mostly future-proofing/for-completeness.
Reviewers: 20after4, amckinley
Reviewed By: amckinley
Maniphest Tasks: T13033
Differential Revision: https://secure.phabricator.com/D18843
Summary: Events with no attendees (e.g. fresh instances of recurring events) would trigger an exception when sending notifications, because `$attendee_map` would still get populated.
Test Plan: Declined event, restarted daemons. Did not see exception. Accepted event, restarted daemons. Saw "[Calendar] [Reminder]" email.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D18835
Summary: Ref T13030. See PHI254. This behavior could be cleaner than I've made it, but it fixes the "this is totally broken" issue, replacing a fatal/exception with an informative (just not terribly useful) page.
Test Plan:
- Added a submodule to a repository.
- In Diffusion, clicked some other file next to the submodule, then edited the URI to the submodule path instead.
- Before patch: fatal.
- After patch: relatively useful message about this being a submodule.
Note that it's normally hard to hit this URI directly. In the browse view, submodules are marked up as directories and linked to a separate submodule resolution flow.
{F5321524}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13030
Differential Revision: https://secure.phabricator.com/D18831
Summary:
See PHI230. Currently, we denormalize raw line counts onto diffs and revisions, but not added/removed line counts.
I'd like to try a `[---+ ]` sort of size hint element (see D16322 for more) as a general approach to conveying size information at a glance and see how it feels, since I think the raw size number isn't very scannable/useful and it may be a significant improvement to hint about how much of a change is throwing stuff out vs adding new stuff.
This just makes the data available without any subquerying and doesn't actually change the UI.
Test Plan:
Created a revision, saw detailed change information populate in the database.
```
mysql> select * from differential_revision where id = 292\G
*************************** 1. row ***************************
id: 292
title: WIP
originalTitle: WIP
phid: PHID-DREV-ux3cxptibn3l5pxsug3z
status: draft
summary: asdf
testPlan: asdf
authorPHID: PHID-USER-cvfydnwadpdj7vdon36z
lastReviewerPHID: NULL
lineCount: 41
dateCreated: 1513179418
dateModified: 1513179418
attached: []
mailKey: h4mn6perdio47o4beomyvu75zezwvredx3mbrlgz
branchName: NULL
viewPolicy: users
editPolicy: users
repositoryPHID: PHID-REPO-wif5lutk5gn3y6ursk4p
properties: {"lines.added":40,"lines.removed":1}
activeDiffPHID: PHID-DIFF-ixjphpunpkenqgukpmce
1 row in set (0.00 sec)
```
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18832
Summary:
Depends on D18828. Ref T7789. See <https://discourse.phabricator-community.org/t/git-lfs-fails-with-large-images/584>.
Currently, when you upload a large (>4MB) image, we may try to assess the dimensions for the image and for each individual chunk.
At best, this is slow and not useful. At worst, it fatals or consumes a ton of memory and I/O we don't need to be using.
Instead:
- Don't try to assess dimensions for chunked files.
- Don't try to assess dimensions for the chunks themselves.
- Squelch errors for bad data, etc., that `gd` can't actually read, since we recover sensibly.
Test Plan:
- Created a 2048x2048 PNG in Photoshop using the "Random Noise" filter which weighs 8.5MB.
- Uploaded it.
- Before patch: got complaints in log about `imagecreatefromstring()` failing, although the actual upload went OK in my environment.
- After patch: clean log, no attempt to detect the size of a big image.
- Also uploaded a small image, got dimensions detected properly still.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T7789
Differential Revision: https://secure.phabricator.com/D18830
Summary: Depends on D18827. Ref T7789. See PHI204. See PHI131. This button got accidentally removed in Diffusion refactoring (`$data` is no longer used).
Test Plan: {F5321459}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T7789
Differential Revision: https://secure.phabricator.com/D18828
Summary: See PHI131. Ref T7789. Although this probably isn't 100% complete, there don't seem to be any actual, known, practical blocking issues remaining (everything is either heresay or not reproducible).
Test Plan: Tried to push LFS locally, got blocked with a helpful message. Enabled setting, tried to push LFS locally, got a successful push.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T7789
Differential Revision: https://secure.phabricator.com/D18825
Summary:
See PHI242. All use cases for this that I know of are pretty hacky, but they don't seem perilous, and it's easier than webhooks.
See P1895, T10183, and T9853 for me previously refusing to implement this since all those use cases were also pretty bad.
Test Plan:
- Wrote a rule to add comments, saw it add comments.
- Reviewed summary, re-edited rule, reviewed transcript to check that all the strings worked OK.
- Wrote a new rule for a non-commentable object (a blog) to make sure I wasn't offered the "Add a comment" action.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18823
Summary:
Ref: https://admin.phacility.com/PHI243
Since our use case primarily focuses on transaction editing, this patch implements the `drydock.blueprint.edit` api method with the understanding that:
a) this is a work in progress
b) object editing is supported, but object creation is not yet implemented
Test Plan:
* updated existing blueprints via Conduit UI
* regression tested `maniphest.edit` by creating new and updating existing tasks
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, yelirekim, jcox
Differential Revision: https://secure.phabricator.com/D18822
Summary:
Fixes T13027. Ref T2543. When revisions promote from "Draft" because builds finish or no builds are configured, the status currently switches from "Draft" to "Needs Review" without re-running Herald.
This means that some rules -- notably, "Send me an email" rules -- don't fire as soon as they should.
Instead of applying this promotion in a hacky way inline, queue it and apply it normally in a second edit, after the current group finishes.
Test Plan:
- Created a revision, reviewed Herald transcripts.
- Saw three Herald passes:
- First pass (revision creation) triggered builds and no email.
- Second pass (builds finished) did not trigger builds (no update) and did not trigger email (revision still a draft).
- Third pass (after promotion out of 'draft') did not trigger builds (no update) but did trigger email (revision no longer a draft).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13027, T2543
Differential Revision: https://secure.phabricator.com/D18819
Summary:
See <https://discourse.phabricator-community.org/t/activation-link-in-welcome-mail-only-works-if-new-user-isnt-semi-logged-in/740/7>.
In T13024, I rewrote the main menu bar to hide potentially sensitive items (like notification and message counts and saved search filters) until users fully log in.
However, the "Log In" item got caught in this too. For clarity, rename `shouldAllowPartialSessions()` to `shouldRequireFullSession()` (since logged-out users don't have any session at all, so it would be a bit misleading to say that "Log In" "allows" a partial session). Then let "Log In" work again for logged-out users.
(In most cases, users are prompted to log in when they take an action which requires them to be logged in -- like creating or editing an object, or adding comments -- so this item doesn't really need to exist. However, it aligns better with user expectations in many cases to have it present, and some reasonable operations like "Check if I have notifications/messages" don't have an obvious thing to click otherwise.)
Test Plan: Viewed site in an incognito window, saw "Log In" button again. Browsed normally, saw normal menu.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18818
Summary:
See <https://discourse.phabricator-community.org/t/diffusion-observed-mercurial-repository-history-broken/825>.
In D18769, I rewrote this from using the `--branch` flag (which is unsafe and does not function on branches named `--config=x.y` and such).
However, this rewrite accidentally changed the result order, which impacted Mercurial commit hisotry lists and graphs. Swap the order of the constraints so we get newest-to-oldest again, as expected.
Test Plan: Viewed a Mercurial repository's history graph, saw sensible chronology after the patch.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18817
Summary: Ref T13001, URLs that return multiple commits should show a list of those commits. Not sure if the actual list looks very pretty this way, but was wondering if this approach was vaguely correct.
Test Plan:
- Navigate to `install/rPbd3c23`
- User should see a list view providing links to `install/rPbd3c2355e8e2b220ae5e3cbfe4a057c8088c6a38` and `install/rPbd3c239d5aada68a31db5742bbb8ec099074a561`
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T13001
Differential Revision: https://secure.phabricator.com/D18816
See PHI238. When an install uninstalls "Legalpad", we were incorrectly failing
to mark sessions as "Signed All Required Documents" by bailing early.
Test Plan: Uninstalled Legalpad, logged in.
Summary: Ref T13019, adds build status back to Diffusion commits
Test Plan: Open a Diffusion commit that has a build status, property list view should show the build status, but not Subscriptions, Projects, or Tokens.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T13019
Differential Revision: https://secure.phabricator.com/D18813
Summary: See PHI234. In T12931 we improved the behavior of Diffusion when a repository's default branch is set to a branch that does not exist, but in T11823 the way refcursors work changed, and we can now get a cursor (just with no positions) back for a deleted branch. When we did, we didn't handle things gracefully.
Test Plan:
- Set default branch to a deleted branch, saw nice error instead of fatal.
- Set default branch to a nonexistent branch which never existed, saw nice error.
- Set default branch to existing "master", saw repository normally.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18811
Summary:
See PHI234. Several issues here:
- The warning about observing a repository in Read/Write mode checks the raw I/O type, not the effective I/O type. That means we can fail to warn if other URIs are set to "Default", and "Default" is "Read/Write" in practice.
- There's just an actual typo which prevents the "Observe" version of this error from triggering properly.
Additionally, add more forceful warnings that "Observe" and "Mirror" mean that you want to //replace// a repository with another one, not that we somehow merge branches selectively. It isn't necessarily obvious that "Observe" doesn't mean "merge/union", since the reasons it can't in the general case are somewhat subtle (conflicts between refs with the same names, detecting ref deletion).
Test Plan:
Read documentation. Hit the error locally by trying to "Observe" while in Read/Write mode:
{F5302655}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18810
Summary:
Ref T10405. If `gd` is not installed, a number of unit tests currently fail because they generate synthetic users and try to composite profile pictures for them.
Instead, just fall back to a static default if `gd` is not available.
Test Plan: Faked this pathway, created a new user, saw a default profile picture.
Reviewers: amckinley, lpriestley, avivey
Reviewed By: avivey
Maniphest Tasks: T10405
Differential Revision: https://secure.phabricator.com/D18812
Summary:
Ref T10233. See PHI231. When users ignore the `arc land` prompt about bad revision states, make it explicitly clear in the transaction log that they broke the rules.
You can currently figure this out by noticing that there's no "This revision is accepted and ready to land." message, but it's unrealistic to expect non-expert users to look for the //absence// of a message to indicate something, and this state change is often relevant.
Test Plan: {F5302351}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10233
Differential Revision: https://secure.phabricator.com/D18808
Summary:
Use ClassQuery to find datasources for the quick-search.
Mostly, this allows extensions to add quicksearches.
Test Plan:
using `/typeahead/class/`, tested several search terms that make sense.
Removed the tag interface from a datasource, which removed it from results.
Reviewers: epriestley, amckinley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18760
Summary:
Depends on D18801. Ref T2543. See PHI229. I missed "Accept" before, but intended to disallow it (like "Reject") since I don't want drafts to be reviewable.
However, "Resign" seems fine to allow? So let's allow that for now.
Test Plan: Was no longer offered "Accept" on draft revisions.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18802
Summary:
See PHI228. Ref T2543. The current logic gets this slightly wrong: prototypes are off, you create a draft with `--draft`, then promote it with "Request Review". This misses both branches.
Instead, test these conditions a little more broadly. We also need to store broadcast state since `getIsNewObject()` isn't good enough with this workflow.
Test Plan:
- With prototypes on and autopromotion, got a rich email after builds finished.
- With prototypes off, got a rich email immediately.
- With prototypes off and `--draft`, got a rich email after "Request Review".
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18801
Summary:
Depends on D18792. Fixes T13024. Fixes T89198. Currently, when users are logging in initially (for example, need to enter MFA) we show more menu items than we should.
Notably, we may show some personalized/private account details, like the number of unread notifications (probably not relevant) or a user's saved queries (possibly sensitive). At best these are misleading (they won't work yet) and there's an outside possibility they leak a little bit of private data.
Instead, nuke everything except "Log Out" when users have partial sessions.
Test Plan:
Hit a partial session (MFA required, email verification required) and looked at the menu. Only saw "Log Out".
{F5297713}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13024
Differential Revision: https://secure.phabricator.com/D18793
Summary: Depends on D18791. Ref T13024. This clears up another initialization order issue, where an unverified address could prevent MFA enrollment.
Test Plan: Configured both verification required and MFA required, clicked "Add Factor", got a dialog for the workflow.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13024
Differential Revision: https://secure.phabricator.com/D18792
Summary:
Depends on D18790. Ref T13024. Fixes T8335. Currently, "unapproved" and "disabled" users are bundled together. This prevents users from completing some registration steps (verification, legalpad documents, MFA enrollment) before approval.
Separate approval out and move it to the end so users can do all the required enrollment stuff on their end before we roadblock them.
Test Plan: Required approval, email verification, signatures, and MFA. Registered an account. Verified email, signed documents, enrolled in MFA, and then got prompted to wait for approval.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13024, T8335
Differential Revision: https://secure.phabricator.com/D18791
Summary:
Depends on D18789. Ref T13024. See PHI223. Currently, if `security.require-multi-factor-auth` and Legalpad "Signature Required" documents are //both// set, it's not possible to survive account registration, since MFA is requiried to sign and signatures are required to add MFA.
Instead, check for signatures before requiring MFA enrollment. This makes logical sense, since it's silly to add MFA if you don't agree to a Terms of Service or whatever.
(Note that if you already have MFA, we prompt for that first, before either of these steps, which also makes sense.)
Test Plan: Configured `security.require-multi-factor-auth`. Added a signature-required document. Loaded a page as a new user. Went through signature workflow, then through the MFA enrollment workflow.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13024
Differential Revision: https://secure.phabricator.com/D18790
Summary: Depends on D18788. Ref T13024. Currently, we prompt users to sign from newest to oldest. This seems less intuitive than oldest to newest.
Test Plan: Dumped document order, saw it swap to oldest-first.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13024
Differential Revision: https://secure.phabricator.com/D18789
Summary: Depends on D18786. Ref T13024. I'm going to change the order this occurs in, but move it to a separate method and clean it up a little first.
Test Plan: Added a new document as required, reloaded, signed it, got logged into a session.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13024
Differential Revision: https://secure.phabricator.com/D18788
Summary: Depends on D18785. Ref T13024. While I'm in here, update this a bit to use the newer stuff.
Test Plan: Searched for Legalpad documents, saw more modern support (subscribers, order by, viewer()).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13024
Differential Revision: https://secure.phabricator.com/D18786
Summary: Ref T13024. Updates LegalpadDocumentQuery to use slightly more modern constructions.
Test Plan: Queried for Legalpad documents, got the same results.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13024
Differential Revision: https://secure.phabricator.com/D18785
Summary:
See PHI225. Previously, see D15335 / T10413. On workboards, we hide archived project tags since they aren't terribly useful in that context, at least most of the time. Originally, see T10349#159916 and D15297.
However, hovercards reuse this display logic, and it's inconsistent/confusing to hide them there, since the actual "Tags" elements on task pages show them. Narrow the scope of this rule.
Test Plan:
- Viewed a hovercard for a task with an archived project tagged, saw archived project.
- Viewed a workboard for the same task, saw only unarchived projects other than the current board tagged (this behavior is unchanged).
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18783
Summary:
Ref T13018. See that task and the Discourse thread for discussion.
This doesn't work as-is and we need to `og:description` everything to make it work. I don't want to sink any more time into this so just back all the changes out for now.
(The `<html>` change is unnecessary anyway.)
Test Plan: Strict revert.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13018
Differential Revision: https://secure.phabricator.com/D18782
Summary: Ref T13018. This is easy to get working roughly, at least, and seems reasonable.
Test Plan: Viewed page source, saw tags. Custom header logo still worked. Pretty hard to debug against a local install since Disqus / debugger tools can't hit it, but I'll see what it looks like in production and tweak it if I got anything horribly wrong.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13018
Differential Revision: https://secure.phabricator.com/D18780
Summary:
Ref T13020. See PHI221.
Freeze legacy method `maniphest.gettasktransactions` in favor of modern method `transaction.search`.
Remove legacy "null on create" behavior from Maniphest status and priority transactions. This behavior is obsolete with EditEngine, and leads to inconsistent transaction sets in the transaction record.
The desired behavior is that transactions which don't do anything (e.g., default value was not changed) don't appear in the transaction log.
Test Plan:
- Viewed API UI and saw `maniphest.gettasktransactions` marked as "Frozen".
- Created a new task via web UI (without changing status/priority), queried transactions with `maniphest.gettasktransacitons`/`transaction.search`, no longer saw "null on create" no-op transactions in record.
- Web UI is unchanged, since these transactions were hidden before and now do not exist.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13020
Differential Revision: https://secure.phabricator.com/D18777
Summary: Whitespace has semantic meaning for yaml files, so we shouldn't suppress whitespace-only lines of diff by default.
Test Plan: Edited local config to include yaml files, saw expected whitespace changes.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18775
Summary:
See PHI180. Currently, if you begin creating or editing an inline and then swap display modes (for example, with "View Unified"), your edit is lost.
Persisting the editor state is complicated and this is very rare, so just prevent the action and warn the user instead.
Also make the warning persist for a little longer since a few of the messages, including this one, take a couple seconds to read now.
Test Plan:
- Edited a comment, tried to swap display modes, got a warning.
- Swapped display modes normally with no comment being edited.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18774
Summary:
Fixes paging on the Diffusion Repository List.
PhabricatorRepositoryQuery needs to specify a behavior for `null` on the OderableColumns definition for the `callsign` column.
See https://phabricator.wikimedia.org/T180457
Test Plan:
1. On an instance with more than 100 repositories
* some of which are missing a callsign
2. Attempt to sort by callsign.
3. See the sorted results
Previously:
3. Exception: "Column "0" has null value, but does not specify a null behavior."
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18773
Summary:
Depends on D18771. See PHI206. Currently, `arc diff --draft` only holds revisions in draft mode: it doesn't put them into draft mode if the install isn't configured to use draft mode.
Instead, make it a bit more forceful so that `arc diff --draft` can create into draft mode explicitly even if protoypes are off. This aligns with expection a little more clearly.
Test Plan: Ran `arc diff --draft` with prototypes off, got a revision held in draft mode.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18772
Summary: See PHI210. Ref T2543. Currently, we don't set this flag if you have prototypes off and don't get any of the new draft stuff, so the mail drops some of the details it is supposed to have.
Test Plan: Disabled prototypes, created a revision, saw summary / test plan in the initial mail.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18771
Summary:
Ref T13012. These flags can be exploited by attackers to execute code remotely. See T13012 for discussion and context.
Additionally, harden some Mercurial commands where possible (by using additional quoting or embedding arguments in other constructs) so they resist these flags and behave properly when passed arguments with these values.
Test Plan:
- Added unit tests.
- Verified "--config" and "--debugger" commands are rejected.
- Verified more commands now work properly even with branches and files named `--debugger`, although not all of them do.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13012
Differential Revision: https://secure.phabricator.com/D18769
Summary:
See PHI199. Ref T2543. When you run a RevisionQuery with a legacy status constraint (via `differential.query`), we currently don't match "Draft" revisions.
Use the actual complete map from `DifferentialRevisionStatus` instead of hard coding the status list so "Draft" is included.
Test Plan:
- Ran `differential.query` with `ids` and `status` for a draft revision.
- Before patch: revision not returned in results.
- After patch: revision returned in results.
(Note that it returns as "Needs Review", for compatibility.)
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18765
Summary:
See PHI190. This clarifies the ruleset a bit:
- If you accepted, then the author used "Request Review" explicitly, we now show "Accepted Earlier" instead of "Accepted" in the "Reviewers" list on the main revision page. This makes it sligthly more clear why the revision is back in your review queue without picking through the transaction log.
- Instead of moving all non-current accepts into "Ready to Review", move only voided accepts into "Ready to Review". This stops us from pulling older accepts which haven't been voided (which could have been incorrectly pulled) and correctly pulls older, voided accepts from before an update (for example: accept, then request review, then update) and generally aligns better with intent/expectation.
Test Plan:
- Accepted, requested review.
- Saw reviewer as "Accepted Earlier".
- Saw review in "Ready to Review" bucket.
- Accepted, updated (with sticky accept).
- Saw reviewer as "Accepted Prior Diff".
- Saw review as "Waiting on Authors".
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18764
Summary:
Ref PHI193. This method of enforcing policy checks is now (mostly) obsolete, and they're generally checked at the Controller/API level instead.
Notably, this method does not call `adjustObjectForPolicyChecks(...)` properly, so it can not handle special cases like "creating a project and taking its newly created members into account" for object policies like "Project Members".
Just remove these checks, which are redundant with checks elsewhere.
Test Plan:
- Set Project application default edit policy to "Administrators and Project Members".
- Tried to create a project as a non-administrator, adding myself.
- Before patch: policy fatal on a VOID object (the project with no PHID generated yet).
- After patch: object created properly. Got a sensible policy error if I didn't include myself as a member.
- Also verified that other edit rules are still enforced/respected (I can't edit stuff I shouldn't be able to edit).
- There's at least a bit of unit test coverage of this, too, which I updated to work via API (which hits the new broad capability checks) instead of via low-level transactions (which enforce only a subset of policy operations now).
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18763
Summary: See PHI195. This bulks out these API methods since all the requests are pretty straightforward.
Test Plan: Ran `edge.search` and `differential.revision.search`.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18762
Summary:
See PHI197. Populates "status" transactions and a few other obvious types where there's no security/performance/payload/formatting issue I can come up with.
The names here are the same as the names for editing with `maniphest.edit`.
Test Plan: Used `transaction.search` to retrieve transactions of all new types.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18761
Summary: Ref T12689. See PHI178. This isn't a complete solution (you may still get mailed via packages/projects) but should fix the obvious issue, where "Resigned" reviewers are incorrectly always sent mail directly.
Test Plan: Had Alice resign, interacted as Bailey, no mail to Alice.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12689
Differential Revision: https://secure.phabricator.com/D18758
Summary:
Depends on D18756. Fixes T12539. See PHI190. Currently, when this occurs:
- Alice accepts.
- Bailey requests review.
- Alice views her dashboard.
...the revision appears in "Waiting on Other Reviewers" (regardless of whether other reviewers actually exist or not).
Instead, ignore these voided/non-current accepts and let the revisions appear in "Ready to Review", which is more natural.
Test Plan: Went through the steps above. On `master`, saw revision in "Waiting on Other Reviewers". After patch, saw it in "Ready to Review".
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12539
Differential Revision: https://secure.phabricator.com/D18757
Summary:
Ref T12539. See PHI190. Currently, each Diff has a `revisionID`, but Revisions do not point at the current active diff. To find the active diff for a given revision, we need to issue a separate query.
Furthermore, this query is inefficient for bulk loads: if we have a lot of revisions, we end up querying for all diff IDs for all those revisions first, then selecting the largest ones and querying again to get the actual diff objects. This strategy could likely be optimized but the query is a mess in any case.
In several cases, it's useful to have the active diff PHID without needing to do a second query -- sometimes for convenience, and sometimes for performance.
T12539 is an example of such a case: it would be nice to refine the bucketing logic (which only depends on active diff PHIDs), but it feels bad to make the page heavier to do it.
For now, this is unused. I'll start using it to fix the bucketing issue, and then we can expand it gradually to address other performance/convenience issues.
Test Plan:
- Ran migrations, inspected database, saw sensible values.
- Created a new revision, saw a sensible database value.
- Updated an existing revision, saw database update properly.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12539
Differential Revision: https://secure.phabricator.com/D18756
Summary: Give profile images a little more space, fix "/" spacing, add a tooltip.
Test Plan: {F5251205}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18749
Summary:
Ref T2543. Fixes two relatively minor things:
- When builds finish in Harbormaster, send mail "From" the author.
- Set the `firstBroadcast` flag so that initial mail picks up earlier history (notably, the "reviewers" line).
For now, I'm not setting `firstBroadcast` on explicit "Request Review" (but maybe we should), and not trying to deal with weird cases where you leave a bunch of comments on a draft. Those might be fine as-is or may get tweaked later.
Test Plan: Created a revision with Harbormaster builds, ran builds, saw initial email come "From" the right user with more metadata.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18748
Summary: Depends on D18746. See PHI174. Adds small author portraits next to each blame line (this is similar to GitHub).
Test Plan:
My local test data isn't that great since I don't have commits from a lot of accounts, but looks functional:
{F5251056}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18747
Summary:
Ref PHI174. This reverts most of these changes:
- 37843127e9 / D18481
- 94cad30ac3 / D18474
- 12ae08b6b1 / D18473
- 0a01334172 / D18462
- ac91ab1ef9 / D18452
These changes made the Diffusion blame view very similar to GitHub's blame view. See D18452 for a before/after of the bulk of these changes; the other revisions are bugfixes.
I think this was generally a step backward, and not motivated by solving a specific problem. I've found the new UI less usable than the old one, and at least one install (see PHI174) also has.
In particular, the revision/commit titles are very bulky and not terribly useful; the date column also isn't terribly useful; the "age" color actually IS pretty useful and was heavily de-emphasized.
I've kept one bugfix here (missing `'a'` tag type) and kept the upgraded icon for "Skip Past This Commit".
I'm going to follow this up with some additional changes:
- Show a small author profile icon, similar to GitHub, to address PHI174 more directly.
- Try a zebra-stripe on blocks of rows to make it more clear where changes affected by a particular commit begin and end.
- Try a hue shift, not just a brightness/saturation shift, to make the "age" color more distinct.
- Try computing colors as even steps, not based purely on age. Currently, if a file has one long-distant commit and several recent commits, all the recent ones show up as very bright green. I think this would probably be more useful if they were distributed more evenly across the available color bands.
Test Plan:
Viewed blame views in Diffusion, saw a more compact UI similar to the old UI.
{F5251019}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18746
Summary: Ref T2543. After D18731, Herald build rules run more often, but now incorrectly try to run builds when Diffusion closes a revision because a commit landed.
Test Plan: Made some mundane updates locally; this is tricky to test comprehensively locally so I'm mostly planning to just push it to `secure`.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18745
Summary:
Ref T2543. Instead of autosubmitting revisions to "Needs Review" when builds finish, allow them to be held in "Draft" indefinitely.
There's currently no UI for this. I plan to just expose it as `arc diff --draft` for now, in a followup change.
Test Plan:
- Created a revision (via Conduit) with "hold as draft", saw it hold as draft after builds finished.
- Created a revision (normally), saw it autosubmit after builds finished.
- Requested review of a "hold as draft" revision to kick it out of draft state.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18737
Summary:
Depends on D18740. Prepares `arc` to receive a `--draft` flag by letting us switch to "differential.revision.edit" instead of "differential.createrevision".
To "differential.revision.edit", we need a transaction list, but we can't automatically construct this list from a field map. Return the transaction list alongside the field map.
The next change uses this list (if available) to switch us to the modern API method.
Test Plan: Ran `arc diff` on the experiemntal branch with followup changes, got a new revision.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18741
Summary: See PHI90. For now, this only provides a limited amount of information, but should satisfy the use case in PHI90 and build toward a more complete version in the future.
Test Plan: Used new Conduit method to retrieve information about diffs.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18744
Summary:
Ref T2543. Fixes T10109.
Currently, Herald only runs in Differential when a change updates the diff. This is partly for historical reasons, and partly because we don't want to restart builds every time someone makes a comment. However, this behavior is inconsistent with other applications (which always trigger on any change), and occasionally confusing to users (in T10109, for example) or otherwise undesirable.
A similar issue is that T2543 has introduced a "Draft" state, where revisions don't send normal mail until builds finish. This interacts poorly with "Send me an email" rules (which shouldn't do anything here) and particularly with "Send me an email + only run these actions the first time the rule matches", since that might have an effect like "do nothing when the revision is created, then never anything again since you already did nothing once".
To navigate both of these issues, let objects tell Herald that certain actions (like mail or builds) are currently forbidden. If a rule uses a field or action which is currently forbidden, the whole rule automatically fails before it executes, but doesn't count toward "only the first time" as far as Herald's tracking of rule execution is concerned.
Then, forbid mail for draft revisions, and forbid builds for revisions which didn't just get updated. Forbidding mail fixes the issues with "Send me an email" that were created by the introduction of the draft state.
Finally, make Herald run on every revision update, not just substantive updates to the diff. This resolves T10109.
Test Plan:
Created revisions via the draft -> submit workflow, saw different transcripts. Here's a mail action being forbidden for a draft:
{F5237324}
Here's a build action being forbidden for a "mundane" update:
{F5237326}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T10109, T2543
Differential Revision: https://secure.phabricator.com/D18731
Summary: Depends on D18734. See PHI176. We run this query on the main Drydock lease web UI, among other places. There is currently no `status` key which can satisfy it.
Test Plan:
Viewed Drydock lease page to get the query.
Ran ##explain SELECT * FROM `drydock_lease` WHERE (status IN ('pending', 'acquired', 'active')) ORDER BY `id` DESC LIMIT 101;## before and after the change.
I don't have a ton of leases locally so the un-key'd EXPLAIN isn't //that// bad, but still shows that we're getting a better key. Before:
```
mysql> explain SELECT * FROM `drydock_lease` WHERE (status IN ('pending', 'acquired', 'active')) ORDER BY `id` DESC LIMIT 101;
+----+-------------+---------------+-------+---------------+---------+---------+------+------+-------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra |
+----+-------------+---------------+-------+---------------+---------+---------+------+------+-------------+
| 1 | SIMPLE | drydock_lease | index | NULL | PRIMARY | 4 | NULL | 101 | Using where |
+----+-------------+---------------+-------+---------------+---------+---------+------+------+-------------+
1 row in set (0.00 sec)
```
After:
```
mysql> explain SELECT * FROM `drydock_lease` WHERE (status IN ('pending', 'acquired', 'active')) ORDER BY `id` DESC LIMIT 101;
+----+-------------+---------------+-------+---------------+------------+---------+------+------+---------------------------------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra |
+----+-------------+---------------+-------+---------------+------------+---------+------+------+---------------------------------------+
| 1 | SIMPLE | drydock_lease | range | key_status | key_status | 130 | NULL | 5 | Using index condition; Using filesort |
+----+-------------+---------------+-------+---------------+------------+---------+------+------+---------------------------------------+
1 row in set (0.00 sec)
```
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D18735
Summary: See PHI176. Depends on D18733. We issue a query when deleting files that currently doesn't hit any keys.
Test Plan:
Ran `./bin/remove destroy --force --trace F56376` to get the query.
Ran ##SELECT * FROM `file` WHERE storageEngine = 'blob' AND storageHandle = '23366' LIMIT 1## before and after the change.
Before:
```
mysql> explain SELECT * FROM `file` WHERE storageEngine = 'blob' AND storageHandle = '23366' LIMIT 1;
+----+-------------+-------+------+---------------+------+---------+------+-------+-------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra |
+----+-------------+-------+------+---------------+------+---------+------+-------+-------------+
| 1 | SIMPLE | file | ALL | NULL | NULL | NULL | NULL | 33866 | Using where |
+----+-------------+-------+------+---------------+------+---------+------+-------+-------------+
1 row in set (0.01 sec)
```
After:
```
mysql> explain SELECT * FROM `file` WHERE storageEngine = 'blob' AND storageHandle = '23366' LIMIT 1;
+----+-------------+-------+------+---------------+------------+---------+-------------+------+------------------------------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra |
+----+-------------+-------+------+---------------+------------+---------+-------------+------+------------------------------------+
| 1 | SIMPLE | file | ref | key_engine | key_engine | 388 | const,const | 190 | Using index condition; Using where |
+----+-------------+-------+------+---------------+------------+---------+-------------+------+------------------------------------+
1 row in set (0.00 sec)
```
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18734
Summary: See PHI176. This is issued periodically by the garbage collector. Normally this table is relatively small-ish so this missing key isn't hugely noticeable.
Test Plan:
Ran `./bin/garbage collect --collector daemon.processes --trace` to get the query the GC runs.
Ran ##DELETE FROM `daemon_logevent` WHERE epoch < 1508443504 LIMIT 100## before and after the key, saw a much better query plan afterward:
Before:
```
mysql> explain DELETE FROM `daemon_logevent` WHERE epoch < 1508443504 LIMIT 100;
+----+-------------+-----------------+------+---------------+------+---------+------+-------+-------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra |
+----+-------------+-----------------+------+---------------+------+---------+------+-------+-------------+
| 1 | SIMPLE | daemon_logevent | ALL | NULL | NULL | NULL | NULL | 19325 | Using where |
+----+-------------+-----------------+------+---------------+------+---------+------+-------+-------------+
1 row in set (0.00 sec)
```
After:
```
mysql> explain DELETE FROM `daemon_logevent` WHERE epoch < 1508443504 LIMIT 100;
+----+-------------+-----------------+-------+---------------+-----------+---------+-------+------+-------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra |
+----+-------------+-----------------+-------+---------------+-----------+---------+-------+------+-------------+
| 1 | SIMPLE | daemon_logevent | range | key_epoch | key_epoch | 4 | const | 1 | Using where |
+----+-------------+-----------------+-------+---------------+-----------+---------+-------+------+-------------+
1 row in set (0.00 sec)
```
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18733
Summary: See PHI176. We issue a query with only `artifactIndex` from `BuildTarget`, but don't have an applicable key.
Test Plan: This isn't on the normal Harbormaster execution path so I'm not 100% sure I have a local repro, but will confirm with customer.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D18732
Summary: See PHI177. Ref T12974. PonderQuestion was overlooked during the Ferret engine conversions.
Test Plan:
Ran migrations, searched for questions, got results:
{F5241185}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12974
Differential Revision: https://secure.phabricator.com/D18736
Summary:
Ref T2543. When Harbormaster finishes builds and promotes a draft revision to review, we currently publish "Harbormaster requested review of...".
Instead, attribute this action to the author, since that's more natural and more useful.
Test Plan: Promoted a diff locally, saw it attributed to me rather than Harbormaster.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18730
Summary:
See PHI165. See D18715. These objects (projects, blogs) also need implementations now.
(I thought about making this method `abstract` or doing try/catch to maybe make this more robust, but I think this should be the end of it, and those changes have mild complexity/compatibility/risk issues.)
Test Plan: Changed `bin/search index` to index only one document of each type, ran `bin/search index --all --force`, saw no more comment-related errors.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18729
Summary: Ref T12680. Use the slightly sleeker construction from D18722 in Differential.
Test Plan: Viewed revision list, reordered by date modified.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12680
Differential Revision: https://secure.phabricator.com/D18727
Summary:
Ref T12680. See PHI167. See that task for discussion.
Rewrite `DiffusionCommitQuery` to work more like `DifferentialRevisionQuery`, and use a UNION to find "all revisions you need to audit OR respond to".
I tried to get this working a little more cleanly than RevisionQuery does, and can probably simplify that now.
Test Plan: Poked at the UI locally without hitting any apparent issues, but my local data is pretty garbage at this point. I'll take a look at how the query plans work on `secure`.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12680
Differential Revision: https://secure.phabricator.com/D18722
Summary:
Ref T2543. When a revision is created, we check if any builds are waiting/failed, and submit it for review immediately if we aren't waiting for anything.
In doing this, we ignore builds with only autotargets, since these are client-side and failures from local `arc lint` / `arc unit` should not count (the user has already chosen to ignore/skip them).
The way we do this has some issues:
- Herald may have started builds, but they may still be PENDING and not have any targets yet. In this case, we'll see "no non-autotargets" and ignore the build, which is wrong.
- We have to load targets but don't really care about them, which is more work than we really need to do.
- And it's kind of complex, too.
Instead, just let `BuildQuery` filter out "autobuilds" (builds generated from autoplans) with a JOIN.
Test Plan: Ran `arc diff` with builds configured, got a clean "Draft" state instead of an incorrect promotion directly to "Needs Review".
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18721
Summary:
See PHI158. In the RefEngine, we test if any old branch positions have been removed from the repository. This is uncommon (but not impossible) in Mercurial, and corresponds to users deleting branches in Git.
Currently, we end up running `hg log` for each position, in parallel. Because of Python's large startup overhead, this can be resource intensive for repositories with a large number of branches.
We have to do this in the general case because the caller may be asking us to resolve `tip`, `newfeature`, `tip~3`, `9`, etc. However, in the specific case where the refs are 40-digit hashes, we can bulk resolve them if they exist, like this:
```
hg log ... --rev (abcd or def0 or ab12 or ...)
```
In the general case, we could probably do less of this than we currently do (instead of testing all old heads, we could prune the list by removing commits which we know are still pointed to by current heads) but that's a slightly more involved change and the effect here is already dramatic.
Test Plan:
Verified that CPU usage drops from ~110s -> ~0.9s:
Before:
```
epriestley@orbital ~/dev/phabricator $ time ./bin/repository refs nss
Updating refs in "nss"...
Done.
real 0m14.676s
user 1m24.714s
sys 0m21.645s
```
After:
```
epriestley@orbital ~/dev/phabricator $ time ./bin/repository refs nss
Updating refs in "nss"...
Done.
real 0m0.861s
user 0m0.882s
sys 0m0.213s
```
- Manually resolved `blue`, `tip`, `9`, etc., got expected results.
- Tried to resolve invalid hashes, got expected result (no resolution).
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18717
Summary: See rPcd14194a329788d5fff6365bcade278fd18f3612 for a similar change. Implement `getApplicationTransactionCommentObject()` to return `null` explicitly.
Test Plan: Ran `bin/search index --type ownerspackage`, got indexing after change.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18715
Summary: Ref T2543. When revisions are in the draft state, tell the user what we're waiting for or why they aren't moving forward.
Test Plan: {F5228840}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18714
Summary: Ref T2543. This is a less ambitious version of the rule in D18628, which I backed off from, since I think this probably still has a fair number of loose ends to tie up.
Test Plan: Created a revision locally.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18713
Summary:
Ref T13000. Since other changes have generally made the ngrams table manageable, I'm not planning to enable common ngrams by default at this time.
Instead, make the threshold configurable with "--threshold" so we can guide installs through tuning this if they want (e.g. PHI110), and tune hosted instances.
(This might eventually become automatic, but just smoothing this bit off for now feels reasonable to me.)
Test Plan: Ran with `--reset`, and with various invalid and valid `--threshold` arguments.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13000
Differential Revision: https://secure.phabricator.com/D18710
Summary: See PHI147.
Test Plan: Called the method from the web UI, got sensible results.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18706
Summary:
Depends on D18702. Ref T13008. This replaces the old hard-coded single rate limit with multiple flexible limits, and defines two types of limits:
- Rate: reject requests if a client has completed too many requests recently.
- Connection: reject requests if a client has too many more connections than disconnections recently.
The connection limit adds +1 to the score for each connection, then adds -1 for each disconnection. So the overall number is how many open connections they have, at least approximately.
Supporting multiple limits will let us do limiting by Hostname and by remote address (e.g., a specific IP can't exceed a low limit, and all requests to a hostname can't exceed a higher limit).
Configuring the new limits looks something like this:
```
PhabricatorStartup::addRateLimit(new PhabricatorClientRateLimit())
->setLimitKey('rate')
->setClientKey($_SERVER['REMOTE_ADDR'])
->setLimit(5);
PhabricatorStartup::addRateLimit(new PhabricatorClientConnectionLimit())
->setLimitKey('conn')
->setClientKey($_SERVER['REMOTE_ADDR'])
->setLimit(2);
```
Test Plan:
- Configured limits as above.
- Made a lot of requests, got cut off by the rate limit.
- Used `curl --limit-rate -F 'data=@the_letter_m.txt' ...` to upload files really slowly. Got cut off by the connection limit. With `enable_post_data_reading` off, this correctly killed the connections //before// the uploads finished.
- I'll send this stuff to `secure` before production to give it more of a chance.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13008
Differential Revision: https://secure.phabricator.com/D18703
Summary:
Ref T13008. Depends on D18701. The overall goal here is to make turning `enable_post_data_reading` off not break things, so we can run rate limiting checks before we read file uploads.
The biggest blocker for this is that turning it off stops `$_FILES` from coming into existence.
This //appears// to mostly work. Specifically:
- Skip the `max_post_size` check when POST is off, since it's meaningless.
- Don't read or scrub $_POST at startup when POST is off.
- When we rebuild REQUEST and POST before processing requests, do multipart parsing if we need to and rebuild FILES.
- Skip the `is_uploaded_file()` check if we built FILES ourselves.
This probably breaks a couple of small things, like maybe `__profile__` and other DarkConsole triggers over POST, and probably some other weird stuff. The parsers may also need more work than they've received so far.
I also need to verify that this actually works (i.e., lets us run code without reading the request body) but I'll include that in the change where I update the actual rate limiting.
Test Plan:
- Disabled `enable_post_data_reading`.
- Uploaded a file with a vanilla upload form (project profile image).
- Uploaded a file with drag and drop.
- Used DarkConsole.
- Submitted comments.
- Created a task.
- Browsed around.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13008
Differential Revision: https://secure.phabricator.com/D18702
Summary:
Ref T13000. Garbage collecting common ngrams is slow because MySQL isn't all that great at deleting rows quickly. See PHI96, where it looks like it's going to take a week to GC ngrams for a ~million objects at a relatively conservative 0.15 threshold.
In the event of a restore, we can reduce the impact by persisting this table so the ngrams just don't get built when the reindex happens.
Test Plan: Viewed schema in Config, saw common ngrams tables marked as "Data" instead of "Index".
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13000
Differential Revision: https://secure.phabricator.com/D18696
Summary: Noticed a couple of typos in the docs, and then things got out of hand.
Test Plan:
- Stared at the words until my eyes watered and the letters began to swim on the screen.
- Consulted a dictionary.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, yelirekim, PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D18693
Summary:
Ref PHI109. Ref T11786. We currently test elapsed time every 64 iterations (since iterations are normally very fast), but at least one install is seeing the page timeout after 30 seconds.
One reason could be that cache fills may occur, and are likely to be much slower than normal iterations. In an extreme case, we could do 64 cache fills before checking the time. Tweak thing so that we always check the time after doing a cache fill, regardless of how many iterations have elapsed since the last attempt.
Additionally, this API method currently accepts an arbitrary number of paths, but implicitly limits each cache query to 500ms. If more than 60 paths are passed, this may exceed 30s. Only let the cache churn for a maximum of 10s across all paths.
If this is more the latter issue than the former, this might replace the GraphCache timeouts with `git` timeouts, but at least our understanding of what's going on here will improve.
Test Plan: This is difficult to test convincingly locally, since I can't reproduce the original issue. It still works after these changes, but it worked fine before these changes too.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T11786
Differential Revision: https://secure.phabricator.com/D18692
Summary:
Ref T13000. Currently, queries can only be executed from the web UI, which requires logging in as a user. I really want to avoid doing that wherever we can, but being able to execute queries on an instance (and, particularly, see the ngrams and timings on the underlying lookups) would have been helpful in several cases.
Improve tooling a bit in advance of the "common ngrams" stuff going out since it seems likely that it will be useful if issues arise.
Test Plan: Ran `bin/search query --query ...`, got useful minimal output. Ran with `--trace` to get internals.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13000
Differential Revision: https://secure.phabricator.com/D18690
