Summary: Ref T7199. This needs some polish and isn't reachable from the UI, but technically has all of the information.
Test Plan:
{F355899}
{F355900}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7199
Differential Revision: https://secure.phabricator.com/D12241
Summary:
Ref T7199. This fully modularizes mail command handling in Maniphest.
I had to add a couple of minor not-totally-solid-feeling tricks to deal with the "create" case, but they feel not-too-bad, and a million times better than what came before.
Test Plan: Used all commands with `receive-test`.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7199
Differential Revision: https://secure.phabricator.com/D12240
Summary: Ref T7199. Convert Differential to modern modular commands.
Test Plan: Used `bin/mail receive-test` to send command and comment mail to Differential.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7199
Differential Revision: https://secure.phabricator.com/D12239
Summary: Ref T7199. Everyone can have a mail command! You can have a mail command! You can have a mail command! Mail commands for everyone!
Test Plan: Used `bin/mail receive-test` to issue commands against files and pastes.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7199
Differential Revision: https://secure.phabricator.com/D12238
Summary: Ref T7199. Half of these aren't even reachable, but make some progress toward reducing the amount of nonsense and garbage in mail handling.
Test Plan: Tested all reachable handlers with `bin/mail receive-test`.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7199
Differential Revision: https://secure.phabricator.com/D12237
Summary:
Ref T7199. Essentially all of the reply handlers now apply transactions to something which implements PhabricatorApplicationTransactionInterface.
We can share code between them by lifting this stuff into a superclass.
First, convert paste. Also rename `PasteMockMailReceiver` to `PasteMailReceiver` (this got mis-copied from Pholio at some point, I think).
Test Plan: Used `bin/mail receive-test` to send comments + `!unsubscribe` to pastes.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7199
Differential Revision: https://secure.phabricator.com/D12236
Summary:
Ref T7689. This gives HandleLists `renderList()` and `renderHandle()` methods, which return views that can perform just-in-time data fetching and generally look and feel like other rendering code, instead of being odd pseudo-functional methods on `Controller`.
Also converts callsites on the Maniphest detail page to use these methods.
Next changes will wipe out more of the callsites.
Test Plan:
- Viewed Maniphest detail page with many relevant handles.
- Created a new subtask.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7689
Differential Revision: https://secure.phabricator.com/D12205
Summary:
Ref T7689, which discusses some of the motivation here. Briefly, these methods are awkward:
- Controller->loadHandles()
- Controller->loadViewerHandles()
- Controller->renderHandlesForPHIDs()
This moves us toward better semantics, less awkwardness, and a more reasonable attack on T7688 which won't double-fetch a bunch of data.
Test Plan:
- Added unit tests.
- Converted one controller to the new stuff.
- Viewed countdown lists, saw handles render.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7689
Differential Revision: https://secure.phabricator.com/D12202
Summary:
Fixes T7629 plus an un filed bug that's breaking creating new threads since we need to add participants EVEN EARLIER than we were doing it now that policy is actually enforced.
Back to the main thrust of this, there is one UI corner case - in the main view if you go from 1:1 to 1:1:1 (i.e. add a 3rd recipient, or Nth in a row) the icon only updates on page reload. I figure this will get sorted out at a later refactor as we make the client better / share more code with durable column.
One other small behavioral oddity is in the main view sometime we start loading with no conpherence. in that case, rather than show some incorrect icon, we show no icon (and "no title") and then things change at load. Seems okay-ish.
Finally, @chad - the CSS is a very work-man-like "use the built in stuff you can specify from PHP" so I'm sure it needs some love.
Test Plan: made all sorts of rooms and threads and liked the icons. noted smooth loading action as i switched around
Reviewers: chad, epriestley
Reviewed By: epriestley
Subscribers: Korvin, chad, epriestley
Maniphest Tasks: T7629
Differential Revision: https://secure.phabricator.com/D12163
Summary:
Ref T6755. Although we do not return response bodies, it is possible to perform crude portscanning if you can execute a DNS rebinding attack (which, for now, remains theoretical).
Limit users to 60 requests / hour to make it less feasible. This would require ~30 years to portscan all ports on a `/32` netblock.
Users who can guess that services may exist can confirm their existence more quickly than this, but if the attacker already had a very small set of candidate services it seems unlikely that portscanning would be of much use in executing the attack.
This protection should eventually be applied to T4190, too (that task also has other considerations).
Test Plan: Set rate limit very low, hit rate limit.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6755
Differential Revision: https://secure.phabricator.com/D12168
Summary: Ref T7584. This hits all the major bullets there. Next step on T7584 is figuring out how it integrates into the full UI and column UI. That said, this is a bit buggy feeling right now since Conpherence as is assumes you are a participant all over the place and rooms make no such assumption. I'll probably this bit up next.
Test Plan:
viewed /conpherence/room/ and saw stuff. viewed the "participant" query as two different users and saw different correct result sets. made a room via the button and it worked. tried to view a room I wasn't a participant in and it failed horribly, which is something to fix in a future diff
created a thread via "send message" on a user profile and it worked
Reviewers: chad, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7584
Differential Revision: https://secure.phabricator.com/D12113
Summary:
Fixes T7563. Fixes T5201. Reframe this as two separate operations:
- Move before or after a task.
- Move to the beginning or end of a priority.
Then:
- Make all the order queries unambiguous and properly reversible, with an explicit `id` order.
- Just reuse `ManiphestTask` to get results in the correct order.
- Simplify the actual transaction apply logic.
- Detect and recover from cases where tasks have identical or similar subpriorities.
Test Plan:
- Wrote and executed unit tests.
- Dragged and dropped tasks within priorities and between priorities in the main Maniphest view.
- Dragged and dropped tasks within priorities in the workboard view, when ordered by priority.
- Also poked at the "natural" order, but that shouldn't be affected.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: chad, epriestley
Maniphest Tasks: T5201, T7563
Differential Revision: https://secure.phabricator.com/D12121
Summary:
Ref T7149. When users give us dumpfiles for import, they will almost inevitably use the `phabricator` namespace. They need to be renamed to use an instance namespace.
We can do this either by:
- importing the data first, then renaming; or
- renaming first, then importing.
This implements the second one, basically `storage renamespace --in dump.sql --from phabricator --to instancename > instance.sql`.
Renaming first is a little hackier since we have to `preg_match()` a SQL dump file, but I think it's better overall:
- With only one database, it lets you dump/import without downtime.
- If you have development stuff in a development environment in the `phabricator` namespace, you don't have to move it aside to do an import.
- No possibility that two people doing an import at the same time on the same box will collide with each other.
- You can do the rename once and then repeat the import process with the renamed dump more easily.
- No tricky stuff with modern Phabricator running against an old dump and the database names not matching up.
None of this is super important, but it just makes large dumps a bit easier to work with, and the dumpfile format is regular enough that this seems unlikely to ever really not work.
Test Plan: Renamespaced a dump, did a `diff -u`, saw all the relevant parts changed (and only those parts changed).
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7149
Differential Revision: https://secure.phabricator.com/D12105
Summary: Ref T7149. Return a real iterator from the Chunk engine, which processes chunks sequentially.
Test Plan:
This is a bit hard to read, but shows the underlying chunks being accessed one at a time and only some being accessed when requesting a range of a file:
```
$ ./bin/files cat F878 --trace --begin 100 --end 256
...
>>> [10] <query> SELECT * FROM `file_storageblob` WHERE `id` = 85
<<< [10] <query> 240 us
better software.
Phabricat>>> [11] <query> SELECT * FROM `file_storageblob` WHERE `id` = 84
<<< [11] <query> 205 us
or includes applications for:
>>> [12] <query> SELECT * FROM `file_storageblob` WHERE `id` = 83
<<< [12] <query> 226 us
- reviewing and auditing source>>> [13] <query> SELECT * FROM `file_storageblob` WHERE `id` = 82
<<< [13] <query> 203 us
code;
- hosting and browsing >>> [14] <query> SELECT * FROM `file_storageblob` WHERE `id` = 81
<<< [14] <query> 231 us
repositories;
- tracking bugs;
```
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: joshuaspence, epriestley
Maniphest Tasks: T7149
Differential Revision: https://secure.phabricator.com/D12073
Summary:
Ref T7149. This makes debugging some of this stuff a bit easier by removing the HTTP part in the middle.
Particularly, I anticipate having this stream data chunk-by-chunk in the near future.
Test Plan: Ran `files cat F23`, got output.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: joshuaspence, epriestley
Maniphest Tasks: T7149
Differential Revision: https://secure.phabricator.com/D12062
Summary:
Ref T7149. This isn't complete and isn't active yet, but does basically work. I'll shore it up in the next few diffs.
The new workflow goes like this:
> Client, file.allocate(): I'd like to upload a file with length L, metadata M, and hash H.
Then the server returns `upload` (a boolean) and `filePHID` (a PHID). These mean:
| upload | filePHID | means |
|---|---|---|
| false | false | Server can't accept file.
| false | true | File data already known, file created from hash.
| true | false | Just upload normally.
| true | true | Query chunks to start or resume a chunked upload.
All but the last case are uninteresting and work like exising uploads with `file.uploadhash` (which we can eventually deprecate).
In the last case:
> Client, file.querychunks(): Give me a list of chunks that I should upload.
This returns all the chunks for the file. Chunks have a start byte, an end byte, and a "complete" flag to indicate that the server already has the data.
Then, the client fills in chunks by sending them:
> Client, file.uploadchunk(): Here is the data for one chunk.
This stuff doesn't work yet or has some caveats:
- I haven't tested resume much.
- Files need an "isPartial()" flag for partial uploads, and the UI needs to respect it.
- The JS client needs to become chunk-aware.
- Chunk size is set crazy low to make testing easier.
- Some debugging flags that I'll remove soon-ish.
- Downloading works, but still streams the whole file into memory.
- This storage engine is disabled by default (hardcoded as a unit test engine) because it's still sketchy.
- Need some code to remove the "isParital" flag when the last chunk is uploaded.
- Maybe do checksumming on chunks.
Test Plan:
- Hacked up `arc upload` (see next diff) to be chunk-aware and uploaded a readme in 18 32-byte chunks. Then downloaded it. Got the same file back that I uploaded.
- File UI now shows some basic chunk info for chunked files:
{F336434}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: joshuaspence, epriestley
Maniphest Tasks: T7149
Differential Revision: https://secure.phabricator.com/D12060
Summary:
Fixes T5843. File storage engines use a very old "selector" mechanism which makes them difficult to extend.
This mechanism predates widespread use of `PhutilSymbolLoader` to discover available implementations at runtime. Runtime discovery has generally proven more flexible and easier to use than explicit selection (although it sometimes needs more UI to support it in cases where order or enabled/disabled flags can not be directly determined).
Use a modern runtime discovery mechanism instead of an explicit selector. This might break any installs which subclassed the `Selector`, but I believe almost no such installs exist, and they'll receive a meaningful exception upon upgrading (any custom engines will no longer implement all of the required methods).
Looking forward, this modernizes infrastructure to prepare for new "virtual" chunked-storage engines, with the eventual goal of supporting very large file uploads and data import into the Phacility cluster.
This uses D12051 to add UI to make it easier to understand the state of storage engines.
Test Plan:
Used new UI panel to assess storage engines:
{F336270}
- Uploaded a small file, saw it go to MySQL engine.
- Uploaded a larger file, saw it go to S3 engine.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5843
Differential Revision: https://secure.phabricator.com/D12053
Summary:
Ref T7149. This is a few steps away, but:
- Generally, I'd like to reduce the amount of "Config" configuration we have.
- One good way to do this is to move it into UIs in Application configuration. We did this with email recently.
- I think this was a great change and I'd like to keep moving in this direction.
- T7149 touches configuration related to file storage engines. Although I'm not planning to fully move configuration into applications yet, it would be easier to debug and test if I could drop a read-only panel there to show engines.
- So, modularize the config stuff so I can add a new panel without hard-coding it.
Test Plan:
- Added, edited, and deleted application emails.
- Viewed non-email application detail pages.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7149
Differential Revision: https://secure.phabricator.com/D12051
Summary:
Ref T2009. Ref T1460. The way Diffusion and Differential load inlines is horrible garbage right now:
- Differential does an ad-hoc query to get the PHIDs, then does a real load to policy check.
- Diffusion completely fakes things. In practice this is not a policy violation, but it's dangerous.
Make TransactionCommentQuery extensible so we can subclass it and get the query building correctly in the right Query layer.
Specifically, the Diffusion and Differential subclasses of this Query will add appropriate `withX()` methods to let us express the query in SQL.
Test Plan: Loaded, previewed, edited, and submitted inlines in Differential and Diffusion
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009, T1460
Differential Revision: https://secure.phabricator.com/D12026
Summary:
Ref T2009. This is another almost-identical copy of the row scaffolding, which has the same 1up/2up bugs as the 8 other copies of this code.
Turn the "undo" element into an InlineCommentView so we can scaffold it.
Then, scaffold it with the same code as everything else.
Test Plan: Hit "Undo", swapped from 1up to 2up, hit "undo" again, swapped back, tried left/right, everything rendered with proper scaffolding.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D12019
Summary: Removes AphrontPanelView, and most of it's CSS - it seems some old previews still call it.
Test Plan: grep for AphrontPanelView, no callsites left. Verify CSS left is minimal needed.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7427
Differential Revision: https://secure.phabricator.com/D12004
Summary:
Ref T2009. Inline comments have "scaffolding", which is basically some empty table cells/rows around them to get the layout correct.
The scaffolding depends on the renderer, since the cells are different for side-by-side vs unified diffs.
This is currently duplicated all over the place:
- Edit view has 1up/2up.
- Detail view has 1up/2up.
- 1up renderer has 1up.
- 2up renderer has four separate copies of the 2up logic.
These all have subtle differences, which are mostly bugs. Start making the scaffolding more composable so we can get rid of that mess.
Test Plan: Added, edited, and removed inline comments on unified and side-by-side diffs.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11997
Summary:
Ref T2009. These classes are "Differential" now, but are used elsewhere in diff infrastructure (e.g., Diffusion).
- Rename them to "PHUIDiff".
- Move them to "src/infrastructure/".
- Give them a base class.
Test Plan: Interacted with inlines in unified and side-by-side views.
Reviewers: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11996
Summary:
Ref T7014. This hooks up the durable column such that when you open it up it loads your most recent Conpherence. You can then switch amongst the various widgets and stuff and everything works nicely.
Except...
- scroll bar does not work
- also doesn't work at HEAD when I add a ton of text to the UI with no changes? (wrapped $copy in array_fill(0, 1000, $copy))
- "widget selector" does not collapse when you select something else
- this part wasn't really specified so I used the aphlict dropdown stuff. didn't want to keep working on that if this was the wrong UI choice
- can not edit title
- do we still want that to be done by clicking on the title, which pops a dialogue?
- can not add participants or calendar events
- what should this UI be? maybe just a button on the top for "participants" and a button on the bottom for calendar? both on top?
- this is not pixel perfect to the mock or two I've seen around. Aside from generally being bad at that, I definitely didn't get the name + timestamps formatting correctly, because the standard DOM of that has timestamp FIRST which appears second due to a "float right". Seemed like a lot of special-casing for what might not even be that important in the UI so I punted. (And again, there's likely many unknown ways in which this isn't pixel perfect)
There's also code quality issues
- `ConpherenceWidgetConfigConstants` is hopefully temporary or at least gets more sleek as we keep progressing here
- copied some CSS from main Conpherence app
- DOM structure is pretty different
- there's some minor CSS tweaks too given the different width (not to mention the DOM structure being different)
- copied some JS from behavior-pontificate.js to sync threads relative to aphlict updates
- JS in general is like a better version of existing JS; these should collapse I'd hope?
- maybe the aphlict-behavior-dropdown change was badsauce?
...but all that said, this definitely feels really nice and I feel like adding stuff is going to be really easy compared to how normal Conpherence is.
Also includes a bonus bug fix - we now correctly update participation. The user would encounter this issue if they were in a conpherence that got some updates and then they went to a different page; they would have unread status for the messages that were ajax'd in. This patch fixes that by making sure we mark participation up to date with the proper transaction in all cases.
Test Plan: hit "\" to invoke the column and saw nice loading UI and my latest conpherence load. sent messages and verified they received A-OK by looking in DOM console. toggled various widges and verified they rendered correctly. opened up a second browser with a second user on the thread, sent a message, and it was received in a nice asynchronous fashion
Reviewers: chad, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7014
Differential Revision: https://secure.phabricator.com/D11968
Summary: Removes AphrontContext bar and uses PHUIInfoView instead. This also attaches to the ObjectBox instead for cleaner UI. Also moved phui-error-view.css which was missed.
Test Plan: Test creating a subtask or a new task, see updated info bar and action buttons.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11920
Summary: Since this element isn't strictly about errors, re-label as info view instead.
Test Plan: Grepped for all callsites, tested UIExamples and a few other random pages.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: hach-que, Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11867
Summary: Ref T7384. This just sends SIGHUP to specified overseers in a nice package.
Test Plan: See D11898.
Reviewers: hach-que, btrahan
Reviewed By: btrahan
Subscribers: joshuaspence, epriestley
Maniphest Tasks: T7384
Differential Revision: https://secure.phabricator.com/D11899
Summary: This still needs some fine tuning, but wanted to get opinions. Using it on a laptop feels pretty good. This also moves `durable-column.css` into its own file since it'll likely continue to grow. Minor CSS tweaks to the near perfect rendition of durable column from pixel based mockups.
Test Plan:
Press \ on my laptop. Having issues with Chrome however, but FF and Safari work as expected.
{F322506}
Reviewers: epriestley, btrahan
Reviewed By: btrahan
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11901
Summary: Fixes T7165. Let users specify a file phid in config, and then use that file via an inline style tag. Also, cache the URI so that we don't have to query the file on every page load.
Test Plan: {F319050}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7165
Differential Revision: https://secure.phabricator.com/D11886
Summary: See D11882 for context and rationale.
Test Plan:
- Ran `almanac.querydevices`.
- Ran `almanac.queryserices`.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11883
Summary:
Fixes T7352. This reduces the memory footprint for instances by combining these two similar daemons into one daemon which handles the responsibilities of both.
The fit isn't 100% perfect here but it's pretty close, and the GC daemon is fairly trivial.
Test Plan:
- Adjusted all the numbers to small numbers (5 second sleep, 120 second GC length).
- Added a ton of logging.
- Started trigger daemon.
- Saw it run a GC cycle.
- Saw it reschedule another cycle after 120 seconds (adjusted down from 4 hours).
- Reverted all the logging/small numbers.
- Ran `bin/phd start`, saw stable trigger daemon running.
- Grepped for removed daemon class name.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7352
Differential Revision: https://secure.phabricator.com/D11872
Summary: Swaps out AphrontMiniPanelView usage with PHUIErrorView. Only used on homepage.
Test Plan:
Grepped for usage, only home. Revisit a new home, see modern componant.
{F310934}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11842
Summary:
Fixes T7291. There are a class of spam/annoyance attacks here that we should be more strict about preventing, since you can add an individual's address as a mailing list.
This application is likely on the way out so I didn't bother trying to do per-object policies.
Test Plan: Set policy restrictively and could no longer create or edit mailing lists.
Reviewers: joshuaspence, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7291
Differential Revision: https://secure.phabricator.com/D11783
Summary: Ref T7152. Gives us an event hook so we can go make users a member of any instance they've been invited to as soon as they verify an email address.
Test Plan:
- Used `bin/auth verify` to trigger the event.
- Build out the invite flow in rSERVICES.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7152
Differential Revision: https://secure.phabricator.com/D11752
Summary:
Ref T7152. Ref T1139. This updates Phabricator so third-party libraries can translate their own stuff. Also:
- Hide "All Caps" when not in development mode, since some users have found this a little confusing.
- With other changes, adds a "Raw Strings" mode (development mode only).
- Add an example silly translation to make sure the serious business flag works.
- Add a basic British English translation.
- Simplify handling of translation overrides.
Test Plan:
- Flipped serious business / development on and off and saw silly/development translations drop off.
- Switched to "All Caps" and saw all caps.
- Switched to Very English, Wow!
- Switched to British english and saw "colour".
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7152, T1139
Differential Revision: https://secure.phabricator.com/D11747
Summary:
Ref T7152. Ref T3554.
- When an administrator clicks "send invites", queue tasks to send the invites.
- Then, actually send the invites.
- Make the links in the invites work properly.
- Also provide `bin/worker execute` to make debugging one-off workers like this easier.
- Clean up some UI, too.
Test Plan:
We now get as far as the exception which is a placeholder for a registration workflow.
{F291213}
{F291214}
{F291215}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3554, T7152
Differential Revision: https://secure.phabricator.com/D11736
Summary:
Ref T7152. This implements the administrative UI for the upstream email invite workflow.
Pieces of this will be reused in Instances to implement the instance invite workflow, although some of it is probably going to be a bit copy/pastey.
This doesn't actually create or send invites yet, and they still can't be carried through registration.
Test Plan:
{F290970}
{F290971}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7152
Differential Revision: https://secure.phabricator.com/D11733
Summary:
Fixes T6484. I primarily need this to synchronize device public keys in the Phabricator cluster so the new stuff in T2783 works.
Although, actually, maybe I don't really need it. But I wrote it anyway and it's desirable to have sooner or later.
Test Plan: Ran method.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6484
Differential Revision: https://secure.phabricator.com/D11163
Summary:
Ref T7152. This builds the core of email invites and implements all the hard logic for them, covering it with a pile of tests.
There's no UI to create these yet, so users can't actually get invites (and administrators can't send them).
This stuff is a complicated mess because there are so many interactions between accounts, email addresses, email verification, email primary-ness, and user verification. However, I think I got it right and got test coverage everwhere.
The degree to which this is exception-driven is a little icky, but I think it's a reasonable way to get the testability we want while still making it hard for callers to get the flow wrong. In particular, I expect there to be at least two callers (one invite flow in the upstream, and one derived invite flow in Instances) so I believe there is merit in burying as much of this logic inside the Engine as is reasonably possible.
Test Plan: Unit tests only.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7152
Differential Revision: https://secure.phabricator.com/D11723
Summary: Fixes T7153.
Test Plan:
used `bin/auth trust-oauth-client` and `bin/auth untrust-oauth-client` to set the bit and verify error states.
registered via oauth with `bin/auth trust-oauth-client` set and I did not have the confirmation screen
registered via oauth with `bin/auth untrust-oauth-client` set and I did have the confirmation screen
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7153
Differential Revision: https://secure.phabricator.com/D11724
Summary: Adds core and apps grouping to configuration options, makes it somewhat easier to browse config options.
Test Plan: Set each option, review list. Breakdown is nearly 50/50 apps/core.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11722
Summary: Super duper sized panels for singluar actions.
Test Plan:
UIExamples, will need more testing in Phacility.
{F286098}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11709
Summary: Ref T7094. We basically need to make sure folks can see repositories before making owners packages about code within. This cleans up things a little bit by moving a bunch of logic out of the storage class and into an editor class.
Test Plan: made a package and it worked! deleted a package and it worked! discovered buggy behavior in more complicated edits and filed T7127; note this bug exists before and after this diff.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7094
Differential Revision: https://secure.phabricator.com/D11652
Summary: We probably can't land this yet, since `arc tasks` still uses `maniphest.find` and `arc close` still uses `differential.getrevision`. We should clean those up and wait at least 30 days before committing this (maybe).
Test Plan: Saw setup issues for `maniphest.find` and `differential.getrevision` calls.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley, joshuaspence, FacebookPOC, aran
Differential Revision: https://secure.phabricator.com/D6333
Summary: Ref T7094. We already had and were mostly using "needProfileImage" on the people query class. Only real trick in this diff is deleting a conduit end point that has been marked deprecated for the better part of 3 years.
Test Plan: clicked around the people action and profiles and calendars loaded nicely.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7094
Differential Revision: https://secure.phabricator.com/D11630
