Summary:
Ref T12392. The logic currently goes like this:
- Try a fetch.
- If that fails, try repairing the origin URI.
- Then try again.
This is pretty complicated, and we can use this simpler logic instead:
- Set the origin URI to the right value.
- Try a fetch.
Setting the origin URI is very fast. This can normally only get us in any trouble in very obscure situations which haven't occurred for many years:
- Pretty much all of this is already covered by `verifyGitOrigin()`, which we run earlier.
- Origins could be configured to have multiple URIs for some reason, but shouldn't be.
- Years ago, you could configure Phabricator to point at a local repository it didn't own and that could conceivably have a different "origin" that you might not want us to delete. If you did this, the daemons have been spewing errors for 3-4 years without you fixing it. The cost of fixing the remote URI is very small even if anyone is affected by this (just set it back to the old value) and there's zero reason to do this and the scenario is ridiculous.
Test Plan: Ran `bin/repository update PHABX --trace --verbose`, saw fetches go through cleanly after URI adjustment.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12392
Differential Revision: https://secure.phabricator.com/D17498
Summary:
Ref T12296. Ref T12392. Currently, when we're observing a remote repository, we periodically run `git fetch ...`.
Instead, periodically run `git ls-remote` (to list refs in the remote) and `git for-each-ref` (to list local refs) and only continue if the two lists are different.
The motivations for this are:
- In T12296, it appears that doing this is //faster// than doing a no-op `git fetch`. This effect seems to reproduce locally in a clean environment (900ms for `ls-remote` + 100ms for `for-each-ref` vs about 1.4s for `fetch`). I don't have any explanation for why this is, but there it is. This isn't a huge change, although the time we're saving does appear to mostly be local CPU time, which is good for us.
- Because we control all writes, we could cache `git for-each-ref` in the future and do fewer disk operations. This doesn't necessarily seem too valuable, though.
- This allows us to tell if a fetch will do anything or not, and make better decisions around clustering (in particular, simplify how observed repository versioning works). With `git fetch`, we can't easily distinguish between "fetch, but nothing changed" and "legitimate fetch".
If a repository updates very regularly we end up doing slightly more work this way (that is, if `ls-remote` always comes back with changes, we do a little extra work), but this is normally very rare.
This might not get non-bare repositories quite right in some cases (i.e., incorrectly detect them as changed when they are unchanged) but we haven't created non-bare repositories for many years.
Test Plan: Ran `bin/repository update --trace --verbose PHABX`, saw sensible construction of local and remote maps and accurate detection of whether a fetch would do anything or not.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12392, T12296
Differential Revision: https://secure.phabricator.com/D17497
Summary: Ref T12270. Builds out a BadgeCache for PhabricatorUser, primarily for Timeline, potentially feed? This should still work if we later let people pick which two, just switch query in BadgeCache.
Test Plan: Give out badges, test timeline for displaying badges from handles and without queries. Revoke a badge, see cache change.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12270
Differential Revision: https://secure.phabricator.com/D17503
Summary:
Fixes T12406. When importing commits, we automatically add auditors if the message lists "Auditors: username".
If the list of auditors includes the commit author, this edit fails because you can't audit your own commits (previously, you sometimes could and/or we didn't validate).
Instead, just ignore "Auditors: author".
Test Plan:
- Made a commit with "Auditors: epriestley".
- Pushed it.
- Saw the HeraldWorker get stuck with the error in T12406.
- Applied the change; worker now succeeded.
Reviewers: chad
Reviewed By: chad
Subscribers: alexmv
Maniphest Tasks: T12406
Differential Revision: https://secure.phabricator.com/D17507
Summary:
Fixes T12409. Config entries may be marked as "deleted", and `bin/config set --database` doesn't un-delete them, so the edit doesn't do anything.
The "most correct" fix here is to swap to transactions so we run the same code, but just fix this narrowly for now since it's one line of code.
Test Plan:
- Set `maniphest.default-priority` to `123`.
- Deleted `maniphest.default-priority` from the web UI by deleting all the text in the box.
- Before patch: `bin/config set --database maniphest.default-priority 789` had no effect.
- After patch: `bin/config set --database maniphest.default-priority 789` worked.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12409
Differential Revision: https://secure.phabricator.com/D17506
Summary: Extends PHUIListItemView to take an icon, link as an "Action Item" that displays on the right side of the menu link. Does not display on Favorites. This allows for adding edit, external, or other links (documentation?) to any menu item. Right now the secondary link is only visible when the item is selected. This feels right, but if we offer it in other ways, users may always want it visible. We could look at making it onhover.
Test Plan:
Add a bunch of random global and personal dashboards to my menu. Add a menu to Favorites, see no link. Test mobile, link works.
{F4136699}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17505
Summary:
Fixes T12372. Long-term fix is T12404, this is a bandaid in the interim.
See T12372 for additional discussion.
Test Plan: Confirmed functional by a user in T12372.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12372
Differential Revision: https://secure.phabricator.com/D17501
Summary:
Via HackerOne. When you view a raw file in Differential, we currently generate a permanent file with default permissions. This may be incorrect: default permissions may be broader than the diff's permissions.
The other three methods of downloading/viewing raw files ("Download" in Diffusion and Differential, "View Raw" in Diffusion and Differential) already apply policies correctly and generate temporary files. However, this workflow was missed when other workflows were updated.
Beyond updating the workflow, delete any files we've generated in the past. This wipes the slate clean on any security issues and frees up a little disk space.
Test Plan:
- Ran migration script, saw existing files get purged.
- Did "View Raw File", got a new file.
- Verified that the file was temporary and properly attached to the diff, with "NO ONE" permissions.
- Double-checked that Diffusion already runs policy logic correctly and applies appropriate policies.
- Double-checked that "Download Raw Diff" in Differential already runs policy logic correctly.
- Double-chekced that "Download Raw Diff" in Diffusion already runs policy logic correctly.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17504
Summary:
Fixes T12400. Adds a "Has MFA" filter to People so you can figure out who you need to harass before turning on "require MFA".
When you run this as a non-admin, you don't currently actually hit the exception: the query just doesn't work. I think this is probably okay, but if we add more of these it might be better to make the "this didn't work" more explicit since it could be confusing in some weird edge cases (like, an administrator sending a non-administrator a link which they expect will show the non-administrator some interesting query results, but they actually just get no constraint). The exception is more of a fail-safe in case we make application changes in the future and don't remember this weird special case.
Test Plan:
- As an administrator and non-administrator, used People and Conduit to query MFA, no-MFA, and don't-care-about-MFA. These queries worked for an admin and didn't work for a non-admin.
- Viewed the list as an administrator, saw MFA users annotated.
- Viewed config help, clicked link as an admin, ended up in the right place.
{F4093033}
{F4093034}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12400
Differential Revision: https://secure.phabricator.com/D17500
Summary: Fixes T12398. This adds `withBadgeStatuses` as a query parameter when searching for Awards to show. In most (all?) cases we currently only show active badges.
Test Plan: Assign myself a badge, archive it and verify it does not appear on profile, comment form, or timeline.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12398
Differential Revision: https://secure.phabricator.com/D17499
Summary: Ref T12264. This allows users to install a dashboard they are viewing to their personal home menu or as a global home menu item. Has some basic ability to be extended later for maybe projects.
Test Plan:
Build a dashboard, click "Install Dashboard".
- As user only get personal option
- As HomeApp edit person, see both options
- Try installation as either, with and without label set
- Fake "global" form as user, get error
- Don't set anything, get error
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12264
Differential Revision: https://secure.phabricator.com/D17492
Summary:
Ref T10967. This is an incremental step toward removing "reviewers" back to a dedicated storage table so we can handle changes like T11050.
This adds the storage table, and starts doing double writes to it (so new or updated reviewers write to both the old edge table and the new "reviewers" table).
Then we can do a migration, swap readers over one at a time, and eventually remove the old write and old storage and then implement new features.
This change has no user-facing impact, it just causes us to write new data to two places instead of one.
This is not completely exhaustive: the Herald "Add Reviewers" action is still doing a manual EDGE transaction. I'll clean that up next and do another pass to look for anything else I missed.
This is also a bit copy/pastey for now but the logic around "RESIGN" is a little different in the two cases until T11050. I'll unify it in future changes.
Test Plan:
- Did a no-op edit.
- Did a no-op comment.
- Added reviewers.
- Removed reviewers.
- Accepted and rejected revisions.
After all of these edits, did a `SELECT * FROM differential_reviewer` manually and saw consistent-looking rows in the database.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10967
Differential Revision: https://secure.phabricator.com/D17495
Summary: Fixes T12391. Adds better scoping to these rules to contain changes to just Conpherence.
Test Plan: Test Conpherence, Task comment, persistent chat on mobile / desktop.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12391
Differential Revision: https://secure.phabricator.com/D17496
Summary: This alignment is off on edit forms, from the new overflow rules. Let's re-align everything for forms too.
Test Plan:
Add 2 new spaces, go to Maniphest, edit a task, see proper alignment of [Space] [Policy] view dropdowns. Check mobile alignment and Safari/FF.
{F3942187}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17491
Summary: Fix tag alignment on project cards when there are multiple tags. Also fixes T12381.
Test Plan: Review a project and people hovercard in sandbox, ensure multiple tags look as expected.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12381
Differential Revision: https://secure.phabricator.com/D17488
Summary: These were once ordered, but I think we switched to being defined in the Engine and never implemented the sorts there. This adds sort ordering to Tasks, Projects, and Repositories.
Test Plan: Review Favorites Menu in local install, see order is now set per the engine. Click Edit Favorites, and re-order. See order sticks.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17490
Summary:
Ref T12270. This just drops the constraint for now, rather than dealing with all the typecasting stuff and putting us in a position which will almost certainly require backward compatibility breaks in the future.
Also renames "badges.*" to "badge.*" for consistency (all other methods are singular: token.*, project.*, differential.revision.*, etc).
Test Plan:
Saw "qualities" now "Not Supported", while other constraints continue to work:
{F3887194}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12270
Differential Revision: https://secure.phabricator.com/D17487
Summary: Allow people to award and remove badges via conduit, but not from the standard badges form.
Test Plan:
Build a generator and generate awards. Didn't test the revoke yet.
{F3857766}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12270
Differential Revision: https://secure.phabricator.com/D17482
Summary: Fixes T12326. Users can make really log tag titles, this forces ellipsis if it is too long.
Test Plan: Write a super long tag, see ellipisis. Test a small tag, see normal layout.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12326
Differential Revision: https://secure.phabricator.com/D17486
Summary:
Fixes T12378. Two minor issues here:
- CAN_INTERACT on tasks uses "USER", but should just use the view policy, which may be more permissive ("PUBLIC").
- CAN_INTERACT is currently prevented from being "PUBLIC" by additional safeguards. Define an explicit capability object for the permission which returns `true` from `shouldAllowPublicPolicySetting()`.
Test Plan:
- Viewed an unlocked task as a logged-out user, saw "login to comment" instead of "locked".
- Viewed a locked task as a logged-out user, saw "locked".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12378
Differential Revision: https://secure.phabricator.com/D17485
Summary: Fixes T12370. Moves this to be absolutely positions so the float doesn't mess up text-overflow layouts.
Test Plan: Chrome, Safari, Firefox, mobile and desktop layouts of Maniphest submenus.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12370
Differential Revision: https://secure.phabricator.com/D17484
Summary: The Safari hack in place casued a truncation issue in Firefox, so that hack is now gone. Instead the bug appears to be the creative inclusion of "space". In fiddling with this adding one space inside the span and one space outside the span seems to resolve all cases.
Test Plan: Chrome, Safari, Firefox. Test "hector" and copy paste of a Task ID.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17483
Summary: This is overly broad and I missed it in local testing with just a single account. Let's pull just the author in.
Test Plan: Review a commit page that wasn't my own, see other authors commits.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17481
Summary: Fixes T12367. CSS here already truncates (or should have been) and is generally more effective. Remove the unneeded server side truncation. Any other UI place these render?
Test Plan: Set Policy to a group name of "Stanford University: Alumni Association and Friends" and see better truncation.
Reviewers: epriestley, eliaspro
Reviewed By: epriestley, eliaspro
Subscribers: eliaspro, Korvin
Maniphest Tasks: T12367
Differential Revision: https://secure.phabricator.com/D17479
Summary: This should be blue, not grey.
Test Plan: Add a milestone and subproject to a project
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17477
Summary: Fixes T10698. This shows badges under the comment preview if the application uses TransactionCommentView. I suspect not everything does, but will pick the fix up for free when modernized.
Test Plan: Test commenting on a task with and without a user that has a badge. See badge preview.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10698
Differential Revision: https://secure.phabricator.com/D17480
Summary: This currently queries all tasks, make it limit to only open tasks.
Test Plan: Assign myself an open and a resolved task. See only open on profile.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17476
Summary: Fixes T12360. I'll probably make a non-audit commit list for this, maybe, eventually, until then add all the needed audit information.
Test Plan: Review commits in my profile, see data and not a fatal.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12360
Differential Revision: https://secure.phabricator.com/D17475
Summary: This just adds a few more dimensions to the generator.
Test Plan: run `bin/lipsum generate badges`, verify new icons and quality work.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17474
Summary: Probably useful if you use Phrequent.
Test Plan: I did not test this beyond lint/unit.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17473
Summary: Ref D17361. This sets a reasonable width on crumbs just in case a title is super long. Also fixes a weird Safari issue.
Test Plan:
Set a username to "hector" and check Safari. Create a badge named "MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM" and test length.
{F3771744}
{F3771747}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17472
Summary: Mostly a minor nit-pick, but I hate sending users off the profile and disorient them onto application search. These pages are pretty easy to maintain, I don't expect to need to do more here. I dropped Differential outright. Kept Tasks and Commits. Now you can browse everything about a user on their profile without leaving. Maybe add a link to ApplicationSearch? Not sure it's important.
Test Plan: Review tasks and commits on mine and other user profiles.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17470
Summary: Ref T12270. Adds the date the badge was awarded.
Test Plan: Award a badge, see date on profile badge when card is flipped.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12270
Differential Revision: https://secure.phabricator.com/D17471
Summary: Fixes T12357. Adds some color to highlighted text in headers.
Test Plan: == Header with **strong** copy ==
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12357
Differential Revision: https://secure.phabricator.com/D17469
Summary: Fixes T10319. This looks for custom profile image, then falls back to a generated profile image.
Test Plan: Create a new user, log in, and see new profile image. Note this seems to break `bin/lipsum generate user`
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10319
Differential Revision: https://secure.phabricator.com/D17467
Summary: Ref T12337. This just fills out a couple more task relationships.
Test Plan: Viewed the edges in the Conduit console, queried for them.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12337
Differential Revision: https://secure.phabricator.com/D17465
Summary: Ref T10319. This adds a basic means of generating default profile images for users. You can generate them for everyone, a group of users, or force updates. This only generated images and stores them in files. It does not assign them to users.
Test Plan:
`bin/people profileimage --all` to generate all images.
`bin/people profileimage --users chad` to generate a user.
`bin/people profileimage --all --force` to force rebuilding all images.
{F3662810}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10319
Differential Revision: https://secure.phabricator.com/D17464
Summary:
Ref T12337. Ref T5873. This provides a generic "edge.search" method which feels like other "verison 3" `*.search` methods.
The major issues here are:
1. Edges use constants internally, which aren't great for an API.
2. A lot of edges are internal and probably not useful to query.
3. Edges don't have a real "id", so paginating them properly is challenging.
I've solved these things like this:
- Edges must opt-in to being available via Conduit by providing a human-readable key (like "mention" instead of "52"). This solvs (1) and (2).
- I faked a mostly-reasonable behavior for paginating.
Test Plan:
Ran various valid and invalid searches. Paginated a large search. Reviewed UI.
{F3651818}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12337, T5873
Differential Revision: https://secure.phabricator.com/D17462
Summary: Ref T12335. Allows you to lock tasks to keep your precious tokens.
Test Plan:
- Awarded tokens to an unlocked task.
- Locked the task.
- Could no longer award/rescind tokens.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12335
Differential Revision: https://secure.phabricator.com/D17461
Summary: Ref T10319. Adds in database columns for upcoming default generated avatar support.
Test Plan: Ran storage upgrade, log into local site to verify it didn't blow up.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10319
Differential Revision: https://secure.phabricator.com/D17459
Summary: Ref T10319. This swaps the default in the Picture Chooser to allow picking of the custom unique avatar. We're currently going with 100k unique possibilities. The logic roughly hashes a user name and picks an image pack, color, and border. Based on that, we select the first character of their username, or fall back to Psyduck if not [a-z][0-9].
Test Plan:
Set the following usernames from ProfilePicture as a test: chad, epriestley, sally, 007, _cat_, -doggie-.
{F3453979}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10319
Differential Revision: https://secure.phabricator.com/D17430
Summary:
Ref T12313. This puts a UI on revoking credentials after a widespread compromise like Cloudbleed or a local one like copy/pasting a token into public chat.
For now, I'm only providing a revoker for conduit tokens since that's the immediate use case.
Test Plan:
- Revoked in user + type, everything + user, everywhere + type, and everything + everywhere modes.
- Verified that conduit tokens were destroyed in all cases.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12313
Differential Revision: https://secure.phabricator.com/D17458
Summary: Ref T9010. This adds more icons and lets the IconChooser handle more icons more easier.
Test Plan: Test Project Icons, Badges Icons
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9006, T9010
Differential Revision: https://secure.phabricator.com/D17456
Summary: Fixes T12347. Ref T12314. Validation gets called no matter what, but is only relevant if the form supports subtypes.
Test Plan: Marked/unmarked a Paste form as editable.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12347, T12314
Differential Revision: https://secure.phabricator.com/D17457
Summary: Fixes T10798. Separates these two since they don't need to be combined and it allows for more flexibility / scalability.
Test Plan:
- Add Badge
- Edit Badge
- Add myself as Recipient
- Remove myself
- Go to my profile
- Award Badge from there
- Assign myself a badge, try to re-assign it, see validation error.
Also, validation errors on dialog forms are ugly.
{F3495630}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10798, T12270
Differential Revision: https://secure.phabricator.com/D17447
