Summary:
Decided the best approach for refactoring the message/command stuff would be to actually start implementing the campfire adapter to get a better idea of what the abstractions should look like. It feels awkward and unwieldy trying to maintain the irc command interface (notice the message instantiation in the `processReadBuffer()` method. However, i'm still not clear what the best approach is without requiring a re-write of nearly all the existing handlers and defining essentially a custom dsl on top of irc's.
I suppose given that alternative, implementing to irc's dsl doesn't sound all that bad. Just feels like poor coupling.
Also, I know that there is some http stuff in libphutil's futures library, but the https future is shit and I need to do some custom curlopt stuff I wasn't sure how to do with that. But if you think this should be refactored, let me know.
I tested this with the ObjectHandler (messages with DXXX initiate the bot to respond with the title/link just as with irc), but beyond that, I haven't tried any of the other handlers, so if there are complications you think i'm going to run into, just let me know (this is one of the reasons for requesting review early on).
Also, this diff is against my last one, even though that hasn't been merged down yet. It was starting to get large and I'd prefer to keep to two conversations separate.
Fixing some lint issues.
Test Plan: Ran the bot with the Object Handler in campfire and observed it behaving properly.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2462
Differential Revision: https://secure.phabricator.com/D4830
Summary:
mainly, this adds the image cropper - yay!
- also removes the file image from the handle stuff I added in V1. now we do all this crazy photo stuff.
Test Plan:
- uploaded a photo by dragging to header and noted 120 x 80 showed up on reload
- uploaded a photo by dragging to edit dialogue spot and noted 120 x 80 showed up on reload
- cropped a photo - noted it cropped right
- cropped a photo again and again and again - seems like it crops okay
Reviewers: epriestley, chad
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2418, T2399
Differential Revision: https://secure.phabricator.com/D4790
Summary: Fixes T2474. Adds a storage dummy storage engine for unit tests, and adds a couple of simple tests for basic file storage.
Test Plan: Ran `arc unit` to execute unit tests.
Reviewers: kwadwon
Reviewed By: kwadwon
CC: aran
Maniphest Tasks: T2474
Differential Revision: https://secure.phabricator.com/D4777
Summary: Comment draft is now saved
Test Plan: Verified that draft is saved
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin, chad
Maniphest Tasks: T2446
Differential Revision: https://secure.phabricator.com/D4831
Summary:
Ugh, just wrote out a huge message, only to lose it with a fat-fingered ctrl-c. Le sigh.
First pass at decoupling the bot from the protocol. Noticeably absent is the command/message coupling. After this design pass I'll give that a go. Could use some advice, thinking that handlers should only create messages (which can be public or private) and not open ended, undefined 'commands'. The problem being that there needs to be some consistant api if we want handlers to be protocol agnostic. Perhaps that's a pipedream, what are your thoughts?
Secondly, a few notes, design review requests on the changes i did make:
# Config. For now i'm passing config through to the adapter. This was mainly to remain backwards compatible on the config. I was thinking it should probably be namespaced into it's own subobject though to distinguish the adapter config from the bot config.
# Adapter selection. This flavor is the one-bot-daemon, config specified protocol version. The upside is that in the future they won't have to run different daemons for this stuff, just have different config, and the door is open for multiple protocol adapters down the road if need be. The downside is that I had to rename the daemon (non-backwards compatible change) and there will need to be some sort of runtime evaluation for instatiation of the adapter. For now I just have a crude switch, but I was thinking of just taking the string they supply as the class name (ala `try { new $clasName(); } catch...`) so as to allow for homegrown adapters, but I wasn't sure how such runtime magic would go over. Also, an alternative would be to make the PhabricatorBot class a non-abstract non-final base class and have the adapters be accompanied by a bot class that just defines their adapter as a property. The upside of which is backwards compatibility (welcome back PhabricatorIRCBot) and perhaps a little bit clearer plugin path for homegrowners.
# Logging. You'll notice I commented out two very important logging lines in the irc adapter. This isn't intended to remain commented out, but I'm not sure what the best way is to get logging at this layer. I'm wary of just composing the daemon back down into the adapter (bi-directional object composition makes my skin crawl), but something needs to happen, obviously. Advice?
That's it. After the feedback on the above, you can either merge down, or wait until i finish the command/message refactor if you don't think the diff will grow too large. Up to you, this all functions as is.
Test Plan: Ran an irc bot, connected, read input, and wrote output including handler integration.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2462
Differential Revision: https://secure.phabricator.com/D4757
Summary: do so via event engine. note different order now...
Test Plan: toggled "show beta applications" to off and noted that Conpherence disappeared. Otherwise noted that links showed.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2424
Differential Revision: https://secure.phabricator.com/D4708
Summary:
See D4812.
- This preference disables the file tree completely.
- It defaults off, so users who want it will have to go turn it on.
- Maybe slightly cleaner would be doing this if the tree was hidden and then ajaxing it in if you press "F", but that's complicated and I don't want to bother.
- Generally, I think this element is useful to something like 5% of users and not useful to 95%.
Test Plan: Enabled and disabled file tree. Looked at commits and revisions; verified they reflected the setting correctly.
Reviewers: vrana
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D4813
Summary:
Make `PhabricatorMenuView` more flexible, so callers can add items to the beginning/end/middle.
In particular, this allows event handlers to receive a $menu and call `addMenuItemToLabel('activity', ...)` or similar, for D4708.
Test Plan: Unit tests. Browsed site. Home page, Conpherence, and other pages with menus look correct.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D4792
Summary: Created Applications application which allows uninstallation & installation of application.
Test Plan: In "Applications" application, clicked on uninstalled the application by cliking Uninstall and chekcing whether they are really uninstalled(Disabling URI & in appearance in the side pane). Then Clicked on the install button of the uninstalled application to check whether they are installed.
Reviewers: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4715
Summary: Added a reply handler. A few problems -- first, I can't seem to get this to actually send me email so I haven't been able to reply (which I would have done by generating a reply, then copying the raw email into scripts/mail_handler.php). Second, the subject is often terrible on these emails -- unless the conpherence is named its something gross like "E4:" Third, on create I am noticing an error on array_combine() which I think is related to the need to write array_combine_not_broken or what have you I saw go by... (PhabricatorTransactionEditor does array_combine(xaction->getOldValue(), xaction->getOldValue()) and complains that the arrays are empty)
Test Plan: noted that /mail/ said mails were being sent
Reviewers: epriestley
Reviewed By: epriestley
CC: chad, aran, Korvin
Maniphest Tasks: T2399
Differential Revision: https://secure.phabricator.com/D4656
Summary: it's ugly. but it works. basically. See T2399 for a roughly prioritized list of what still needs to happen.
Test Plan:
- created a conpherence with myself from my profile
- created a conpherence with myself from "new conpherence"
- created a conphernece with another from "new conpherence"
- created a conpherence with several others
- created a conpherence with files in the initial post
- verified files via comment text ("{F232} is awesome!") and via traditional attach
- edited a conpherence image
- verified it showed up in the header and in the conpherence menu on the left
- edited a conpherence title
- verified it showed up in the header and in the conpherence menu on the right
- verified each widget showed up when clicked and displayed the proper data
- calendar being an exception since it sucks so hard right now.
Reviewers: epriestley, chad
Reviewed By: epriestley
CC: aran, epriestley, chad, codeblock, Korvin
Maniphest Tasks: T2301
Differential Revision: https://secure.phabricator.com/D4620
Summary: Adds an ALL CAPs language, requires changes from libphutil as well.
Test Plan: Turn on AC, get caps back. Turn it back to English, stuff went away.
Reviewers: epriestley, btrahan, vrana
Reviewed By: vrana
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4627
Summary:
Added Applications Details View
Applications Detail View
Test Plan: In "Applications" application, clicked on each application to check whether the each application detail view is displayed.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4615
Summary: This needs some tweaks but I'll follow up with @DeedyDas in T2353.
Test Plan: So many memes.
Reviewers: chad, btrahan, DeedyDas
Reviewed By: chad
CC: aran
Maniphest Tasks: T2353
Differential Revision: https://secure.phabricator.com/D4616
Summary: Attempting to learn how to 'modernize' apps so I can update things. Adds a sidenav, crumbs, and views.
Test Plan: Tested creating lists on web and mobile.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4598
Summary:
- PHABRICATOR_ENV is now optional. If you don't specify it, we won't load a config file.
- PhabricatorSetup is now gone.
- I removed the alternate file domain check for now, see T2380.
- `phabricator.setup` config is now gone.
- Rewrote documentation:
- No more mentions of `phabricator.setup`.
- Normal install guide no longer mentions PHABRICATOR_ENV. This is now an advanced topic.
- Clarified that you only need to set up one of apache, nginx or lighttpd.
- Tweaked a few things I've seen users have difficulty with.
This should have no effect on any existing installs, but make the process much simpler for future installs.
Closes T2221.
Closes T2223.
Closes T2228.
Test Plan:
- Removed my PHABRICATOR_ENV and went through the install process.
- Generated and read documentation.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2221, T2223, T2228
Differential Revision: https://secure.phabricator.com/D4596
Summary: Port the database checks over.
Test Plan: Triggered all the checks via intentional misconfiguration.
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2228
Differential Revision: https://secure.phabricator.com/D4590
Summary:
- Allow new-style setup to raise fatal setup errors.
- Port extension checks to new-style setup as fatal errors.
- When fatal errors are raised, abort setup and show them in a chrome-free response.
Test Plan: {F29981}
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T2228
Differential Revision: https://secure.phabricator.com/D4587
Summary:
We no longer need to do PHP CLI checks (D4568) or run `git submodule` (D4581) so we don't need $PATH to be set to complete setup. Move it to post-install.
Drop the instructions about PHP-FPM because the Phabricator config is dramatically easier now that we have it.
Test Plan: Set environment.append-paths to various things, faked lack of $PATH, verified I got the warning when I expected to setting Phabricator config cleared it.
Reviewers: codeblock, btrahan
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2228
Differential Revision: https://secure.phabricator.com/D4585
Summary:
Fixes T2293.
We currently hard-require this in setup. We do not need to; we don't actually need it until we start running daemons. Move it to post-install and provide more guidance.
We could make this even easier in the future, but we'd need to special case it, since it's dangerous to let it be set to any value (if you set it to the wrong value, you can't log in). We could safely have a workflow which writes the current request URI into the database configuration, or a two-stage workflow where we set the URI and then verify it, but these both imply some special casing and complication. This should be a step forward from where we are today, regardless.
Test Plan:
Removed "phabricator.base-uri" from my configuration. Verified Phabricator still works.
Without "phabricator.base-uri" configured, logged in from multiple host names (127.0.0.1:8080, local.aphront.com:8080).
Configured "phabricator.base-uri". Verified my unblessed session no longer worked. Verified setup issue went away.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2293
Differential Revision: https://secure.phabricator.com/D4580
Summary:
Makes various fixes to the Daemon console UI:
- Removes timeline, timeline cursors, and timeline-related controllers. This abstraction is all but dead and just waiting on an eventual cleanup effort with Facebook (see T2003). There's no need to inspect or debug it anymore.
- Instead of showing the 15 most recently launched non-exited daemons, show all the running daemons. With the old rule, "dead" daemons tended to build up at the bottom of the list -- e.g., secure.phabricator.com shows the 7 active daemons, then 8 dead daemons from as far back as Aug 2012. Showing running daemons is far more useful.
- Simplify the two "Running Daemons" and "All Daemons" subviews into one "All Daemons" subview. The main console now has "running daemons", effectively.
- Create a "Recently completed tasks" view, which shows how many tasks of each task class have completed in the last 15 minutes and how long they took on average. Understanding how quickly tasks are completing is one of the most common uses of the daemon console, and it's currently almost useless for that. Now that we archive tasks, we can show this information in an easily digestable form.
- Partially modernize all of the remaining views.
Test Plan: Looked at daemon console.
Reviewers: btrahan, chad, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2372, T2003
Differential Revision: https://secure.phabricator.com/D4573
Summary: Simple dialog for creating memes. We can add more features (typeahead, selection thumbs, preview) later.
Test Plan: {F29815}
Reviewers: DeedyDas, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T2353
Differential Revision: https://secure.phabricator.com/D4557
Summary:
Pholio tile to show up on home page
First image is shown at mock page.
Test Plan: Pholio app shows up on home page. First image is shown at mock page.
Reviewers: epriestley
CC: aran, Korvin
Maniphest Tasks: T2356
Differential Revision: https://secure.phabricator.com/D4553
Summary:
T2154
Adding the Conduit query method implementation, and metadata to the phutil register library.
Test Plan:
Choose conduit.query on the web UI to see information about the method.
Then, click the "Call Method" button and observe the method result.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4550
Summary: Created "Applications" application which lists all the installed applications in phabricator.
Test Plan: Navigated to localphabricatorinstall.com/applications and check whether it actually shows the list of all installed applications.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2352
Differential Revision: https://secure.phabricator.com/D4548
Summary: Technically we should have these for all the OAuth providers but I don't think anyone really has trouble with them and it can probably be done generically after T1536. Preserve the functionality, at least.
Test Plan: Broke my config, verified warnings appeared.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2228
Differential Revision: https://secure.phabricator.com/D4506
Summary: These are nonblocking warnings and can move to post-install.
Test Plan: Broke my environment and observed the warnings.
Reviewers: btrahan, vrana
Reviewed By: vrana
CC: aran, asherkin
Maniphest Tasks: T2228
Differential Revision: https://secure.phabricator.com/D4505
Summary:
Migrate to the new hotness. Also:
- Remove a string test, which is now impossible since the config will repair itself and raise a type error.
- Restore the header even in /config/ -- this check is kind of hacky and it feels a bit more natural now that it's above the menu.
Test Plan: Set my local disk path to something invalid, verified I got a setup error.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2228
Differential Revision: https://secure.phabricator.com/D4497
Summary:
Follows Phabricator's feed and puts notifications into channels
that are configured.
~~notification.all - bool - 1:1 stories to messages~~
notification.types - array - Specific story types to notify for - ["differential", "maniphest"]
notification.verbosity - int - Range of 0-3 for verbosity
notification.max_pages - int - Maximum number of pages to go back per poll
notification.page_size - int - Size of pages (limit) to poll
~~notification.channels - array - Array of channels to send messages to~~
~~notification.sleep - int - Seconds to sleep between polls~~
Test Plan: Run phabot with various configuration options
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin, asherkin
Differential Revision: https://secure.phabricator.com/D4418
Summary: Used only by Facebook.
Test Plan: Moved to Facebook repo and verified it still works.
Reviewers: nh, epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4515
Summary: Ports mail stuff from the existing setup process to the more modular setup checks.
Test Plan: Configured my local install to have all these errors, verified setup raised them.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2228
Differential Revision: https://secure.phabricator.com/D4494
Summary:
Read configuration from the new database source.
This adds an extra MySQL connect + query to every page. They're very cheap so I think we can suffer them for now, but I'd like to put cache in front of this at some point. The difficulties are:
- If we use APC, multi-frontend installs (Facebook) can't dirty it (major problem), and the CLI can't dirty it (fine for now, maybe a major problem later).
- If we use Memcache, we need to add config stuff.
- We could use APC in all non-Facebook installs if we can make it dirtyable from the CLI, but I don't see a reasonable way to do that.
- We don't have any other caches which are faster than the database.
So I'll probably implement Memcache support at some point, although this is a lame excuse for it.
Test Plan: Added some config values via web UI, saw them active on the install.
Reviewers: btrahan, codeblock, vrana
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2221
Differential Revision: https://secure.phabricator.com/D4296
Summary:
Currently, we have a "config" panel in DarkConsole. It's useful to have a table of all effective config values, but it doesn't need to be in DarkConsole. Move it to Config instead. Basically:
- You don't need to activate DarkConsole to see it anymore;
- now visible only to admins;
- respects config mask/hide;
- somewhat prettier;
- links to config edit;
- no longer ships down on every DarkConsole request with a giant table of rarely-used data.
Test Plan: Looked at the table. Looked at lack of table in darkconsole.
Reviewers: codeblock, btrahan
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2255
Differential Revision: https://secure.phabricator.com/D4473
Summary:
Port MetaMTA options for Owners, Pholio and Macro.
At some point I'd like to get rid of all these options (provide one "reply domain", and not allow overrides of reply handlers -- use events instead) but that's a battle we can fight later.
Test Plan: Looked at options, looked at setup issues, edited something.
Reviewers: codeblock, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2255
Differential Revision: https://secure.phabricator.com/D4469
Summary: Some views expose some/most/all of the basics (id, class, sigil, metadata, etc); let them extend a dedicated view to get it for free.
Test Plan: Viewed home page, paste, mobile dropdown, etc.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D4440
Summary: Implement Diffusion MetaMTA options. Also make the fake '{{config.option}}' rule work, and use Remarkup to render summaries as well as descriptions.
Test Plan: Looked at Diffusion rules, edited some, looked at setup issues, verified '{{config.option}}' linked to the right option.
Reviewers: codeblock, btrahan
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2255
Differential Revision: https://secure.phabricator.com/D4466
Summary:
See discussion in D4438. Allows users to customize application tiles, and implements generally reasonable defaults so they hopefully won't.
Sizes are "invisible" (internal only, used to hide admin apps from non-admins), "hidden" (hide by default, show after clicking "Show More Applications"), "show" (show a small square tile) and "full" (show a full-width tile with subtitle).
Test Plan:
Default view for a non-admin:
{F29375}
Adjusted settings, hidden:
{F29373}
Adjusted settings, shown:
{F29374}
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D4439
Summary:
No fancy-pants smarty stuff yet, but merges /applications/ and the awful application buttons into the dark navigation.
Hover state is maybe a little weird.
Test Plan: {F29324}
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran, btrahan, codeblock
Differential Revision: https://secure.phabricator.com/D4431
Summary: Allows to easily disable responding to "where is..."
Test Plan: Run ircbot with and without the handler
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4444
Summary:
Port PHPMailer options. Also:
- Don't show values on config lists if they're masked (this is mostly for passwords, to prevent them from being idly/accidentally disclosed).
- Don't show "default" icon -- just show an icon if the value has been customized. This makes it easier to pick out custom values.
Test Plan: Looked at / edited mailer values.
Reviewers: codeblock, btrahan
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2255
Differential Revision: https://secure.phabricator.com/D4441
