Summary: Ref T10163. Activate on `@d`, not just `@`. Note that if you type `@d` and then press delete once so you're left with `@`, we stay active (and show the "type a username" hint).
Test Plan:
- Typed `@`, no completer.
- Typed `d`, got completer.
- Typed delete, still had completer, now showing hint prompt.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10163
Differential Revision: https://secure.phabricator.com/D15037
Summary:
Ref T10163. Some characters are almost certainly punctuation or markup rather than autocomplete requests. Immediately cancel any active autocomplete when the user types one of these.
Note that some of these are also suffix characters. If you type `@dog,`, you have until the next character to decide you actually mean to autocomplete. Once you type something else we deactivate.
If you type `#dog#` or `##`, we deactivate immediately.
Test Plan: Typed `@dog#`, etc.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10163
Differential Revision: https://secure.phabricator.com/D15036
Summary: Ref T10163. This allows activation in blockquotes or after `NOTE:`, for consistency.
Test Plan: Typed `>@dog`, etc., got autocomplete.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10163
Differential Revision: https://secure.phabricator.com/D15035
Summary:
Ref T10163.
- If a user types an autocomplete character ("@" or "#") and then a space, deactivate immediately (probably an ordered list).
- If a user types an autocomplete character indented on a line with no other prior text, don't activate (probably an ordered list or code block).
Test Plan:
Typed:
- `# `, saw immediate deactivation.
- ` #`, saw no activation in the first place.
- `#x`, saw activation.
- `asdf #x`, saw activation.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10163
Differential Revision: https://secure.phabricator.com/D15033
Summary: Ref T10163. I would still sometimes not get a replacement after clicking with the delayed blur. This seems to fix the issue more consistently: instead of listening for a click event (which fires after the blur), listen for a mousedown event (which fires before the blur).
Test Plan: Observed consistent selection via mouse locally.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10163
Differential Revision: https://secure.phabricator.com/D15032
Summary:
Ref T10163.
- If you click a result, we get a blur before your click hits, and deactivate before the click can work. Instead, wait before responding to blur.
- Use the standard sort handler which puts unixnames over human names. Also use the standard filter which deals with disabled users not matching unless they're the only match.
Test Plan:
- Clicked a result, got a replacement.
- Named myself "dog dog", typed "@dog", user "@dog" was now first match despite me being "@admin".
- Used normal typeaheads to make sure I didn't break sort handler.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10163
Differential Revision: https://secure.phabricator.com/D15031
Summary: Motivate your employees with inspirational quotes. A new quote every day!
Test Plan: So inspirational.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15026
Summary: Ref T10054. People, projects, and instances no longer use icon nav, so we can get rid of it in favor of profile menus.
Test Plan: Grepped for everything, looked through workboards/profiles again.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15022
Summary:
Ref T10054. Primary goal is to be able to remove IconNav from the codebase.
I've made these non-editable so users can't customize them yet. We //might// want administrators to customize these globally instead? In any case, we avoid a bunch of product questions by just locking these down for now.
Test Plan: {F1061348}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15020
Summary: Ref T10054. Take specialization off the objects and put it on Engine subclasses instead. One reason for this is that certain objects (like users) might have multiple different sets of panels in the future (e.g., their user profile and their home page).
Test Plan:
- No user-visible changes.
- PanelEngine no longer has any hardcoded "project" stuff.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15018
Summary:
Ref T10054. This makes the profile menu full-height. It uses two pieces of dark magic:
- `calc()`, which allows you to do math in CSS.
- The `vh` unit, which is CSS for "viewport height".
Apparently this kind of stuff just works now? CSS got good at some point?
Test Plan:
- Page looks correct in Safari, Chrome, Firefox.
- Checked `caniuse.com` for `vh` and `calc()`, saw they're supported?
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15017
Summary:
Ref T10054. I haven't done any of the big-picture layout stuff yet, but this should get look-and-feel somewhere in the ballpark of reasonablness, I think.
Major missing stuff:
- No "collapse" state or action yet.
- Menu is not full-height (requires changes to the rendering pipeline).
Test Plan: {F1060941}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15016
Summary: Ref T3725. This probably has 900,000 bugs. This will need updates for subprojects/milestones.
Test Plan:
- Tested very gently in Safari, Firefox and Chrome.
- Reasonable inputs appear to work.
- Clicking, escape, tab, return, arrow keys work OK?
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T3725
Differential Revision: https://secure.phabricator.com/D15029
Summary: Ref T10054. Just simplifying this a bit before I start laying in the new profile menus.
Test Plan:
- Viewed Diviner on desktop and checked the mobile menu.
- Viewed Files on desktop and checked the mobile menu.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15015
Summary:
Ref T10054.
I made this a dropdown (currently: "Visible" or "Disabled") since I imagine we //miiiight// want to add a "Hidden, but click 'More' to reveal" state or do other special stuff in this vein. Not 100% sold on that but seemed within the realm of plausibility.
Test Plan: {F1060759}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15012
Summary: Ref T10054. Allows users to drag menu items to reorder them.
Test Plan: Reordered a project menu.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15011
Summary:
Ref T10054. This does a big chunk of the legwork to let users reconfigure profile menus (currently, just project menus).
This includes:
- Editing builtin items (e.g., you can rename the default items).
- Creating new items (for now, only links are available).
This does not yet include:
- Hiding items.
- Reordering items.
- Lots of fancy types of items (dashboards, etc).
- Any UI changes.
- Documentation (does feature: TODO link for documentation).
Test Plan:
{F1060695}
{F1060696}
{F1060697}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15010
Summary:
hack hack hack
(`class_exists()` no longer throws in a libphutil environment.)
Test Plan: derpaderp
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15013
Summary: Fixes T10139. This clarification seems reasonable to me.
Test Plan:
- Viewed a revision with context.
- Clicked "Show All Context".
- Saw "All Context Shown".
{F1060624}
{F1060625}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10139
Differential Revision: https://secure.phabricator.com/D15009
Summary: Ref T10054. This mostly makes sure that mobile gets to have the same profile menu that Desktop does.
Test Plan:
- Viewed menus on mobile, saw all profile menu actions available.
- Viewed/used changed pages (column detail, edit column, edit picture).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15008
Summary: Ref T10054. This has no product impact, but prepares us for customizable side nav on "profiles" (today, projects; probably users some day; and maybe other stuff down the road).
Test Plan: Clicked all links on a profile, everything was exactly the same as before.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15007
Summary:
Ref T4705 (there are also some other adjacent related tasks dealing with URIs).
Currently, we issue a "get repositories matching URIs: ..." query by loading every possible repository and then checking their URIs in PHP.
Instead, put URIs in a separate table. I plan for each repository to potentially have multiple URIs soon, so this prepares for that.
Test Plan:
- Ran migrations.
- Looked at index table, made sure it appeared sensible.
- Ran some queries by `uri` to find repositories, found the repositories I expected.
- Updated the remote URI of a repository, saw queries / index update appropriately.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4705
Differential Revision: https://secure.phabricator.com/D15005
Summary: Fixes T10096. The `**` was being parsed as part of the hashtag, so `**#asdf**` interpreted `#asdf**` as a hashtag.
Test Plan: Unit test; bolded stuff with hashy contents.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10096
Differential Revision: https://secure.phabricator.com/D15006
Summary:
Fixes T10135. When the viewer is a member of no projects, specify the constraint type as a new "EMPTY" type.
When a query has an "EMPTY" constraint, fail fast with no results.
Test Plan:
- Viewed a viewerprojects() query result set as a user in no projects.
- Before patch: got a lot of hits. After patch: no hits.
- Viewed a normal result set, no changes.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10135
Differential Revision: https://secure.phabricator.com/D15003
Summary: A lot of confusing stuff happens when you create a milestone or subproject which isn't explained clearly in the UI. This is causing more harm than good on the balance since we're still figuring out how to move forward here. Just turn it off for now until we're closer to pushing it forward.
Test Plan: Viewed a project, no more UI for subprojects or milestones.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14999
Summary:
See IRC. We're supposed to repair configuration, but if custom validators throw a generic `Exception` or use `PhutilTypeSpec` to do a check, we may explode way harder than we intend to.
Instead, soften these exceptions into validation exceptions so we repair configuration, raise a setup issue, and continue.
Test Plan: {F1059609}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14998
Summary:
Ref T10121. This doesn't work at all at HEAD, and even when it did it was mostly just confusing to installs with unexpected setups where Phabricator is receiving mail at `@mycompany.com` and this is colliding with real addresses.
It might make sense to restore it some day after the next Conphernece update, but just strip it out for now. Since it doesn't work anyway, I'm pretty confident no one is using it.
Test Plan:
- Before patch: send mail to `dog@local.phacility.com`, got a policy error from Conpherece.
- After patch: sent mail to `dog@local.phacility.com`, got a correct "no routable recipients" error.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10121
Differential Revision: https://secure.phabricator.com/D14997
Summary:
Ref T10121. If a user sends mail with duplicate headers, like:
```
X-Duplicate: A
X-Duplicate: B
```
...and we process it with `mail_handler.php`, we may end up with `array('A', 'B')` as the header value. When we try to write this back into an error response mail, it fails.
Test Plan:
- Generated a message with duplicate headers.
- Piped it into `mail_handler.php` with `--process-duplicates` and `--trace` to get a look at it.
- Faked an exception.
- Before patch: bad error email.
- After patch: clean error email showing multiple header values.
```
$ ./bin/mail show-outbound --id 12386
PROPERTIES
ID: 12386
Status: queued
Related PHID:
Message:
PARAMETERS
sensitive: 1
is-error: 1
force: 1
subject: Error Processing Mail (Exception)
raw-to: ["epriestley@phacility.com"]
HEADERS
X-Phabricator-Sent-This-Message: Yes
X-Mail-Transport-Agent: MetaMTA
X-Auto-Response-Suppress: All
TEXT BODY
Your email to Phabricator was not processed, because an error occurred while
trying to handle it:
Exception: TEST
-- Original Message Body -----------------------------------------------------
testy testy
-- Original Message Headers --------------------------------------------------
from: Evan Priestley <epriestley@phacility.com>
content-type: text/plain; charset=us-ascii
content-transfer-encoding: 7bit
x-smtp-server: smtp.gmail.com:epriestley@phacility.com
subject: test outbound mail
message-id: 7isvptmllqvdvtdxthvdwzg3woj5au7csyuh3hopypjv6y6hqb32qm4bcrd4jtid
x-universally-unique-identifier: 4E489E20-F674-49B2-94BA-0DE44F504EAA
date: Mon, 11 Jan 2016 09:50:12 -0800
date: Mon, 11 Jan 2016 09:50:13 -0800
date: Mon, 11 Jan 2016 09:50:14 -0800
date: Mon, 11 Jan 2016 09:50:15 -0800
to: epriestley@yghe.net
mime-version: 1.0 (Mac OS X Mail 8.2 \(2104\))
HTML BODY
(This message has no HTML body.)
```
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10121
Differential Revision: https://secure.phabricator.com/D14996
Summary: Fixes T8826. Git tracks an "author date", which may be different from the "committed date". We don't currently extract/show this; do so.
Test Plan: {F1059235}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8826
Differential Revision: https://secure.phabricator.com/D14995
Summary:
Fixes T10117.
- I accidentally broke setting `null` to unassign tasks at some point when I added richer validation.
- Raise a better error if the user passes junk.
Test Plan:
- Unassigned a task via API and web UI.
- Reassigned a task via API and web UI.
- Tried to do an invalid assign via API, got a sensible error.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10117
Differential Revision: https://secure.phabricator.com/D14992
Summary: Ref T4245. Full commit display names (like `rPaaaa`) are going to be obnoxious soon in some cases (e.g., `rPaaaa` becomes `R123:aaaa`, which is much uglier) so reduce how often we show the repository in cases where it isn't really necessary to include it.
Test Plan:
- Saw no more `rX` on repository list view for Git/Mercurial (still present for Subversion).
- Saw no more `rX` on various repository detail views, except when referencing other commits (e.g., mentions).
- Grepped for removed `getShortName()`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D14990
Summary:
Ref T4245.
- Rename "Clone/Checkout As" to "Short Name" in the UI.
- Allow any repository to have a short name, not just hosted repositories.
Test Plan:
- Ran migration.
- Reviewed old transactions, saw they looked good.
- Edited an existing repository's short name.
- Gave an imported repository a new short name.
- Removed a repository's short name.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D14989
Summary:
Ref T4245. This allows `bin/repository update bread` to work, in addition to `rBREAD`, `R123`, `123`, `BREAD`, etc., if a repository has a short name set.
This primarily affects CLI commands (like `bin/repository`) and Conduit API calls. It has no normal user-facing impact.
Test Plan: Ran `bin/repository update bread` and such.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D14988
Summary: Fixes T10116.
Test Plan:
- Prior to patch: Control/Command + Enter submitted form but ignored actions.
- After patch: verifid command + enter submits actions.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10116
Differential Revision: https://secure.phabricator.com/D14991
Summary:
Via HackerOne. The use of `$key` here should be `$extended_key`.
Exploiting this requires a very unusual group of objects to be subjected to extended policy checks. I believe there is no way to actually get anything bad through the policy filter today, but this could have been an issue in the future.
Test Plan:
- Added a unit test which snuck something through the policy filter.
- Fixed use of `$extended_key`.
- Test now passes.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14993
Summary:
Fixes T7938.
- Primarily, users can currently shoot themselves in the foot by putting `../../etc/passwd` and other similar nonsense in these fields (this is not dangerous, but also does not work). Require sensible names.
- Enforce uniqueness so these names can be used in URIs and as identifiers in the future.
- (This doesn't start actually using them for anything fancy yet.)
Test Plan:
- Gave several repositories clone names: a valid name, two duplicate names, an invalid, name, some with no names.
- Ran migrations.
- Got clean conversion for valid names, appropriate errors for invalid/duplicate names.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7938
Differential Revision: https://secure.phabricator.com/D14986
Summary:
If you try to pull the hovercard of something you can no longer see (maybe you loaded the page, then the policy changed) there won't be a value in the array here.
(The rest of the code anticipates this possibility.)
Test Plan: Hovered some stuff.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14987
Summary: See Q266.
Test Plan: Created a bulk job, clicked "Details" instead of "Confirm", clicked "Continue" to get back to confirmation dialog.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14985
Summary:
Ref T5155. Swaps Phabricator over to the new first-party S3 client using the v4 authentication API so it works in all regions.
The API requires an explicit region, so the new `amazon-s3.region` is now required. I'll write guidance about this.
Test Plan:
- Uploaded files to S3.
- Migrated ~1GB of files to S3.
- Loaded a bunch of files off S3.
- Browsed around the S3 bucket.
- Deleted a file, verified the data on S3 was destroyed.
- Hit new setup warning.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5155
Differential Revision: https://secure.phabricator.com/D14982
Summary: Ref T10110. If an image had `width` or `height`, we would accidentally not give it an `$image_class`.
Test Plan:
{F1057988}
{F1057989}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10110
Differential Revision: https://secure.phabricator.com/D14983
Summary: Ref T9828. Mostly just does a minor modernization pass, but also doesn't migrate chunked files since it's not meaningful (they don't have data, directly).
Test Plan: Ran `bin/files migrate` with various flags. Migrated S3 -> Blob and Blob -> S3.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9828
Differential Revision: https://secure.phabricator.com/D14981
Summary:
Ref T8612. If a change affects more than 10K paths + hunks, tell the user it's too big and don't bother trying to write it. We're mostly bounded by INSERTs here.
Also, fix an issue with file upload errors. The keys are real PHP constants, but were accidentally converted to strings in D12797, causing every error to show as "unknown error".
Test Plan: {F1057509}
Reviewers: joshuaspence
Reviewed By: joshuaspence
Maniphest Tasks: T8612
Differential Revision: https://secure.phabricator.com/D14977
