Summary:
We've been having trouble with viewing diffs timing out when there's a lot of unit test failures. It was caused by formatting userdata for every single failure. The expensive part of this was actually creating the engine for every result, so moved the construction outside of the loop.
Diffs that timed out (2 min) loading before load in around 6 seconds now.
Test Plan: Loaded diffs that used to time out. Verified that details still looked right when Show Full Unit Test Results Is Clicked.
Reviewers: epriestley, keegancsmith, lifeihuang, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran, andrewjcg
Differential Revision: https://secure.phabricator.com/D7581
Summary:
Ref T4110. This denormalized field used to power "Group By: Assigned" got dropped in the T2217 migration at some point.
Restore its population, and fix all the data in the database.
Test Plan: Ran migration, verified database came out reasonable-looking. Reassigned a task, verified database. Ran a "Group By: assigned" query.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4110
Differential Revision: https://secure.phabricator.com/D7602
Summary: Fixes T4123. If you click "Profile" on a page, we already profile all the ajax requests it generates. Do the same for "Analyze Query Plans".
Test Plan: Viewed a page with Ajax requests using "Analyze Query Plans", and not using "Analyze Query Plans".
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4123
Differential Revision: https://secure.phabricator.com/D7601
Summary:
Fixes T4109. If a revision has a bad `repositoryPHID` (for example, because the repository was deleted), `DifferentialRevisionQuery` calls `didRejectResult()` on it, which raises a policy exception, even if the viewer is omnipotent. This aborts the `MessageParser`, because it does not expect policy exceptions to be raised for an omnipotent viewer.
Fix this in two ways:
# Never raise a policy exception for an omnipotent viewer. I think this is the expected behavior and a reasonable rule.
# In this case, load the revision for an omnipotent viewer.
This feels a little gross, but it's the only place where we do this in the codebase right now. We can clean this up later on once it's more clear what the circumstances of checks like these are.
Test Plan: Set a revision to have an invalid `repositoryPHID`, ran message parser on it, got a clean parse.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4109
Differential Revision: https://secure.phabricator.com/D7603
Summary:
Ref T2230. When fully set up, we have up to three users who all need to write into the repositories:
- The webserver needs to write for HTTP receives.
- The SSH user needs to write for SSH receives.
- The daemons need to write for "git fetch", "git clone", etc.
These three users don't need to be different, but in practice they are often not likely to all be the same user. If for no other reason, making them all the same user requires you to "git clone httpd@host.com", and installs are likely to prefer "git clone git@host.com".
Using three different users also allows better privilege separation. Particularly, the daemon user can be the //only// user with write access to the repositories. The webserver and SSH user can accomplish their writes through `sudo`, with a whitelisted set of commands. This means that even if you compromise the `ssh` user, you need to find a way to escallate from there to the daemon user in order to, e.g., write arbitrary stuff into the repository or bypass commit hooks.
This lays some of the groundwork for a highly-separated configuration where the SSH and HTTP users have the fewest privileges possible and use `sudo` to interact with repositories. Some future work which might make sense:
- Make `bin/phd` respect this (require start as the right user, or as root and drop privileges, if this configuration is set).
- Execute all `git/hg/svn` commands via sudo?
Users aren't expected to configure this yet so I haven't written any documentation.
Test Plan:
Added an SSH user ("dweller") and gave it sudo by adding this to `/etc/sudoers`:
dweller ALL=(epriestley) SETENV: NOPASSWD: /usr/bin/git-upload-pack, /usr/bin/git-receive-pack
Then I ran git pushes and pulls over SSH via "dweller@localhost". They successfully interacted with the repository on disk as the "epriestley" user.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7589
Summary: Fixed a small bug that caused the catch-all commit to purge previously added symbols in that session.
Test Plan: Re-ran the script, observed corrected behavior.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4117
Differential Revision: https://secure.phabricator.com/D7597
Summary:
Modified the import script so it will only try to load a configurable
number of symbols at a time to avoid exhausting memory for large project
imports.
I haven't written a line of PHP in more than a decade, so please forgive
any stylistic or technical errors.
Test Plan: Ran the script on symbol table generated from linux kernel.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4117
Differential Revision: https://secure.phabricator.com/D7596
Summary: Although I don't want to end up with 20 of these again, this is a reasonable default to provide, particularly for installs where a large portion of the userbase primarily reports bugs and does not interact with them directly.
Test Plan: Hit `/maniphest/`, saw "Subscribed", clicked it, saw the tasks I'm subscribed to.
Reviewers: jbrown, btrahan
Reviewed By: jbrown
CC: aran
Maniphest Tasks: T4100
Differential Revision: https://secure.phabricator.com/D7586
Summary:
A usable, Land to GitHub flow.
Still to do:
- Refactor all git/hg stratagies to a sane structure.
- Make the dialogs Workflow + explain why it's disabled.
- Show button and request Link Account if GH is enabled, but user is not linked.
- After refreshing token, user ends up in the settings stage.
Hacked something in LandController to be able to show an arbitrary dialog from a strategy.
It's not very nice, but I want to make some more refactoring to the controller/strategy/ies anyway.
Also made PhabricatorRepository::getRemoteURIObject() public, because it was very useful in getting
the domain and path for the repo.
Test Plan:
Went through these flows:
- load revision in hosted, github-backed, non-github backed repos to see button as needed.
- hit land with weak token - sent to refresh it with the extra scope.
- Land to repo I'm not allowed - got proper error message.
- Successfully landed; Failed to apply patch.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T182
Differential Revision: https://secure.phabricator.com/D7555
Summary:
Ref T4039. This fixes an issue where a user with the ability to create repositories could view repositories he is otherwise not permitted to see, by following these steps:
- Suppose you want to see repository "A".
- Create a repository with the same VCS, called "B".
- Edit the local path, changing "/var/repo/B" to "/var/repo/A".
- Now it points at a working copy of a repository you can't see.
- Although you won't be able to make it through discovery (the pull will fail with the wrong credentials), you can read some information out of the repository directly through the Diffusion UI, probably?
I'm not sure this was really practical to execute since there are a bunch of sanity checks along most/all of the major pathways, but lock it down since normal users shouldn't be editing it anyway. In the best case, this would make a mess.
Test Plan: {F81391}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4039
Differential Revision: https://secure.phabricator.com/D7580
Summary:
Ref T4039. This is mostly to deal with that, to prevent the security issues associated with mutable local paths. The next diff will lock them in the web UI.
I also added a confirmation prompt to `bin/repository delete`, which was a little scary without one.
See one comment inline about the `--as` flag. I don't love this, but when I started adding all the stuff we'd need to let this transaction show up as "Administrator" it quickly got pretty big.
Test Plan: Ran `bin/repository edit ...`, saw an edit with a transaction show up on the web UI.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4039
Differential Revision: https://secure.phabricator.com/D7579
Summary:
Fixes T4095. Fixes T3817.
- The batch editor has some funky handle code which misses projects, share that.
- Remove some hacks for T3817 that should be good now.
Test Plan: Looked at batch editor, saw projects. Looked at task list.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, martin.schulz
Maniphest Tasks: T3817, T4095
Differential Revision: https://secure.phabricator.com/D7578
Summary:
Fixes T3741. The flag is respected in terms of actually creating the account, but the UI is a bit unclear.
This can never occur naturally, but installs can register an event which locks it.
Test Plan:
Artificially locked it, verified I got more reasonable UI;
{F81282}
Reviewers: btrahan, datr
Reviewed By: datr
CC: aran
Maniphest Tasks: T3741
Differential Revision: https://secure.phabricator.com/D7577
Summary:
- Add an option for the queue.
- By default, enable it.
- Dump new users into the queue.
- Send admins an email to approve them.
Test Plan:
- Registered new accounts with queue on and off.
- As an admin, approved accounts and disabled the queue from email.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7576
Summary:
- If you're an administrator and there are users waiting for approval, show a count on the home page.
- Sort out the `isUserActivated()` access check.
- Hide all the menu widgets except "Logout" for disabled and unapproved users.
- Add a "Log In" item.
- Add a bunch of unit tests.
Test Plan: Ran unit tests, clicked around as unapproved/approved/logged-in/logged-out users.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, chad
Differential Revision: https://secure.phabricator.com/D7574
Summary:
Nothing fancy here, just:
- UI to show users needing approval.
- "Approve" and "Disable" actions.
- Send "Approved" email on approve.
- "Approve" edit + log operations.
- "Wait for Approval" state for users who need approval.
There's still no natural way for users to end up not-approved -- you have to write directly to the database.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7573
Summary:
Mailbox sometimes (?) changes the case of the email address (?). Be more liberal in what we accept.
Also fix a minor output bug.
Test Plan: Sent mail to `e1+...` instead of `E1+...`, verified it arrived.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7575
Summary: I opened a pull request to fix this in the WePay upstream, see
<https://github.com/wepay/PHP-SDK/pull/13>. Fix it here too now until that
gets pulled.
Auditors: btrahan
Summary:
Small step forward which improves existing stuff or lays groudwork for future stuff:
- Currently, to check for email verification, we have to single-query the email address on every page. Instead, denoramlize it into the user object.
- Migrate all the existing users.
- When the user verifies an email, mark them as `isEmailVerified` if the email is their primary email.
- Just make the checks look at the `isEmailVerified` field.
- Add a new check, `isUserActivated()`, to cover email-verified plus disabled. Currently, a non-verified-but-not-disabled user could theoretically use Conduit over SSH, if anyone deployed it. Tighten that up.
- Add an `isApproved` flag, which is always true for now. In a future diff, I want to add a default-on admin approval queue for new accounts, to prevent configuration mistakes. The way it will work is:
- When the queue is enabled, registering users are created with `isApproved = false`.
- Admins are sent an email, "[Phabricator] New User Approval (alincoln)", telling them that a new user is waiting for approval.
- They go to the web UI and approve the user.
- Manually-created accounts are auto-approved.
- The email will have instructions for disabling the queue.
I think this queue will be helpful for new installs and give them peace of mind, and when you go to disable it we have a better opportunity to warn you about exactly what that means.
Generally, I want to improve the default safety of registration, since if you just blindly coast through the path of least resistance right now your install ends up pretty open, and realistically few installs are on VPNs.
Test Plan:
- Ran migration, verified `isEmailVerified` populated correctly.
- Created a new user, checked DB for verified (not verified).
- Verified, checked DB (now verified).
- Used Conduit, People, Diffusion.
Reviewers: btrahan
Reviewed By: btrahan
CC: chad, aran
Differential Revision: https://secure.phabricator.com/D7572
Summary:
Ref T3472. Currently, if an install only allows "@mycompany.com" emails and you try to register with an "@personal.com" account, we let you pick an "@mycompany.com" address instead. This is secure: you still have to verify the email. However, it defies user expectation -- it's somewhat confusing that we let you register. Instead, provide a hard roadblock.
(These accounts can still be linked, just not used for registration.)
Test Plan: See screenshot.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3472
Differential Revision: https://secure.phabricator.com/D7571
Summary: See private chatter. Make it explicitly clear when adding a provider that anyone who can browse to Phabricator can register.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7570
Summary: We don't actually support this yet, so hide the configuration.
Test Plan: Edited branches for an hg repo.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7563
Summary:
Ref T2230. As far as I can tell, getting SVN working over HTTP is incredibly complicated. It's all DAV-based and doesn't appear to have any kind of binary we can just execute and pass requests through to. Don't support it for now.
- Disable it in the UI.
- Make sure all the error messages are reasonable.
Test Plan: Tried to HTTP an SVN repo. Tried to clone a Git repo with SVN, got a good error message.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7562
Summary:
Fixes T3034. This is obsoleted by modern policies.
This was written by a Facebook intern and is rarely used -- the Hive install might be the only use in the wild. It has never really worked correctly.
Test Plan: `grep`; browsed Differential.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3034
Differential Revision: https://secure.phabricator.com/D7568
Summary: Fixes T4006.
Test Plan: clicked "select all" and dragged around tasks. Noted the task remained selected as I re-ordered, thus keeping hte count accurate. Verified when I hit "batch edit" the right tasks showed up.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4006
Differential Revision: https://secure.phabricator.com/D7566
Summary: Fixes T3535. Also, flip flop on that spacing thing and make the spaces purdy
Test Plan: got an arcanist projected phid in the json dict
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T3535
Differential Revision: https://secure.phabricator.com/D7565
Summary: adds FIELD_PROJECTS and deploys it to Maniphest Task Herald Adapter. Went with "projects" because it feels like that could go well in other Adapters that want to conditionalize based on project.
Test Plan: made a new herald rule to be cc'd if project foo was on a task. it worked!
Reviewers: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7564
Summary:
Ref T2230. Very rarely, even though we've flushed the connection and sent all the data, we'll close the connection before Git is happy with it and it will flip out with an error like this:
fatal: The remote end hung up unexpectedly
fatal: early EOF
fatal: index-pack failed
This is hard to reproduce because it depends on the order of read/write operations we can't directly control. I only saw it about 2% of the time, by just running `git pull` over and over again.
Waiting for Git to close its side of the connection seems to fix it.
Test Plan: Ran `git clone` a ton of times without seeing the error again. Ran `git push` a ton of times with new commits.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7558
Summary:
Ref T2230. The SVN protocol has a sensible protocol format with a good spec here:
http://svn.apache.org/repos/asf/subversion/trunk/subversion/libsvn_ra_svn/protocol
Particularly, compare this statement to the clown show that is the Mercurial wire protocol:
> It is possible to parse an item without knowing its type in advance.
WHAT A REASONABLE STATEMENT TO BE ABLE TO MAKE ABOUT A WIRE PROTOCOL
Although it makes substantially more sense than Mercurial, it's much heavier-weight than the Git or Mercurial protocols, since it isn't distributed.
It's also not possible to figure out if a request is a write request (or even which repository it is against) without proxying some of the protocol frames. Finally, several protocol commands embed repository URLs, and we need to reach into the protocol and translate them.
Test Plan: Ran various SVN commands over SSH (`svn log`, `svn up`, `svn commit`, etc).
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7556
Summary:
Ref T2230. This is substantially more complicated than Git, but mostly because Mercurial's protocol is a like 50 ad-hoc extensions cobbled together. Because we must decode protocol frames in order to determine if a request is read or write, 90% of this is implementing a stream parser for the protocol.
Mercurial's own parser is simpler, but relies on blocking reads. Since we don't even have methods for blocking reads right now and keeping the whole thing non-blocking is conceptually better, I made the parser nonblocking. It ends up being a lot of stuff. I made an effort to cover it reasonably well with unit tests, and to make sure we fail closed (i.e., reject requests) if there are any parts of the protocol I got wrong.
A lot of the complexity is sharable with the HTTP stuff, so it ends up being not-so-bad, just very hard to verify by inspection as clearly correct.
Test Plan:
- Ran `hg clone` over SSH.
- Ran `hg fetch` over SSH.
- Ran `hg push` over SSH, to a read-only repo (error) and a read-write repo (success).
Reviewers: btrahan, asherkin
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7553
Summary: Ref T2230. Fixes T4079. As it turns out, this is Git being weird. See comments for some detials about what's going on here.
Test Plan: Created shallow and deep Git clones.
Reviewers: hach-que, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4079, T2230
Differential Revision: https://secure.phabricator.com/D7554
Summary: Fixes T4084. See that task for discussion.
Test Plan: Did `git clone`. My setup doesn't precisely reproduce the original issue, but hopefully @enko can confirm this is a fix.
Reviewers: btrahan, enko
Reviewed By: enko
CC: enko, aran
Maniphest Tasks: T4084
Differential Revision: https://secure.phabricator.com/D7561
Summary:
Ref T2230. In Git, we can determine if a command is read-only or read/write from the command itself, but this isn't the case in Mercurial or SVN.
For Mercurial and SVN, we need to proxy the protocol that's coming over the wire, look at each request from the client, and then check if it's a read or a write. To support this, provide a more flexible version of `passthruIO`.
The way this will work is:
- The SSH IO channel is wrapped in a `ProtocolChannel` which can parse the the incoming stream into message objects.
- The `willWriteCallback` will look at those messages and determine if they're reads or writes.
- If they're writes, it will check for write permission.
- If we're good to go, the message object is converted back into a byte stream and handed to the underlying command.
Test Plan: Executed `git clone`, `git clone --depth 3`, `git push` (against no-write repo, got error), `git push` (against valid repo).
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, asherkin, aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7551
Summary: Missing some `break;`, pretty sure this is causing the issue on `secure.phabricator.com`.
Test Plan: Will push.
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7559
Summary: This CAN_EDIT capability doesn't exist. `PhabricatorMacroCapabilityManage::CAPABILITY` (checked on line 15) is used instead.
Test Plan: Disabled, then re-enabled a macro.
Reviewers: hach-que, btrahan
Reviewed By: hach-que
CC: aran
Differential Revision: https://secure.phabricator.com/D7550
Summary: This is kind of a quick hack to make symbol lookup work for C#. ctags calls C# 'csharp', while pygments recognises it as 'cs' (or at least, I have to put 'cs' in the Arcanist indexed languages for the clickables to appear, while it's 'csharp' in the symbol database).
Test Plan: Tested this in my live install and it makes symbol lookup work.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7497
Summary:
Now that diffs have PHIDs we can create buildables for them.
This also adds `buildable.diff` in the variables list so the diff ID is available, and it also fixes the Cancel button on "Edit Plan" page so it redirects to the right place.
Test Plan: Created a buildable from a diff, ran a build plan against it that had `echo ${buildable.diff}` and got the right ID. Also tested the "Edit Plan" cancel redirect.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7546
Summary:
This uses an event listener to render the status of builds on their buildables. The revision and commit view now renders out the status of each of the builds.
Currently the revision controller has the results for the latest diff rendered out. We might want to show the status of previous diffs in the future, but for now I think the latest diff should do fine.
There's also a number of bug fixes in this diff, including a particularly nasty one where builds would have a build plan PHID generated for them, which resulted in handle lookups always returning invalid objects.
Test Plan: Ran builds against diffs and commits, saw them appear on the revision and commit view controllers.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7544
Test Plan: This is one of the rare moments where unit tests for views would be useful.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7547
Summary:
Ref T1049. This is very minimal, but does what it says.
I merged the variable replacement code so Remote + HTTP can share more stuff.
Test Plan:
Ran "HTTP" and "Remote" build plans.
{F79886}
{F79887}
Reviewers: hach-que, btrahan
Reviewed By: hach-que
CC: zeeg, aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7541
Summary: This prevents a crash in applying build plans when more than one buildable exists for the same object. It also adds a check into the "New Manual Build" page to ensure that users can't create a buildable for an object that already has one.
Test Plan: Tried to create a buildable for an object that already has one and a nice friendly error appeared. Applied a build plan to a buildable whose object has two buildables and didn't get a crash any more.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7543
