Summary:
Ref T9252. I think there's a more complex version of this problem discussed elsewhere, but here's what we hit today:
- 5 commits land at the same time and trigger 5 builds.
- All of them go to acquire a working copy.
- Working copies have a limit of 1 right now, so 1 of them gets the lease on it.
- The other 4 all trigger allocation of //new// working copies. So now we have: 1 active, leased working copy and 4 pending, leased working copies.
- The 4 pending working copies will never activate without manual intervention, so these 4 builds are stuck forever.
To fix this, prevent WorkingCopies from giving out leases until they activate. So now the leases won't acquire until we know the working copy is good, which solves the first problem.
However, this creates a secondary problem:
- As above, all 5 go to acquire a working copy.
- One gets it.
- The other 4 trigger allocations, but no longer acquire leases. This is an improvement.
- Every time the leases update, they trigger another allocation, but never acquire. They trigger, say, a few thousand allocations.
- Eventually the first build finishes up and the second lease acquires the working copy. After some time, all of the builds finish.
- However, they generated an unboundedly large number of pending working copy resources during this time.
This is technically "okay-ish", in that it did work correctly, it just generated a gigantic mess as a side effect.
To solve this, at least for now, provide a mechanism to impose allocation rate limits and put a cap on the number of allocating resources of a given type. As hard-coded, this the greater of "1" or "25% of the active resources in the pool".
So if there are 40 working copies active, we'll start allocating up to 10 more and then cut new allocations off until those allocations get sorted out. This prevents us from getting runaway queues of limitless size.
This also imposes a total active working copy resource limit of 1, which incidentally also fixes the problem, although I expect to raise this soon.
These mechanisms will need refinement, but the basic idea is:
- Resources which aren't sure if they can actually activate should wait until they do activate before allowing leases to acquire them. I'm fairly confident this rule is a reasonable one.
- Then we limit how many bookkeeping side effects Drydock can generate once it starts encountering limits.
Broadly, some amount of mess is inevitable because Drydock is allowed to try things that might not work. In an extreme case we could prevent this mess by setting all these limits at "1" forever, which would degrade Drydock to effectively be a synchronous, blocking queue.
The idea here is to put some amount of slack in the system (more than zero, but less than infinity) so we get the performance benefits of having a parallel, asyncronous system without a finite, manageable amount of mess.
Numbers larger than 0 but less than infinity are pretty tricky, but I think rules like "X% of active resources" seem fairly reasonable, at least for resources like working copies.
Test Plan:
Ran something like this:
```
for i in `seq 1 5`; do sh -c '(./bin/harbormaster build --plan 10 rX... &) &'; done;
```
Saw 5 plans launch, acquire leases, proceed in an orderly fashion, and eventually finish successfully.
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14236
Summary:
Ref T9513. I checked this briefly but didn't do a very thorough job of it.
- Don't try to query merges for Subversion, since it doesn't support them.
- Fix up "existsquery" to work properly (and efficiently) for both hosted and imported repositories.
- Fix up "parentsquery" to have similar behavior on invalid commits to other VCSes (throw an exception).
Test Plan:
- No more merges warning on SVN.
- Hosted SVN gets the right exists result now.
- Visiting "r23980283789287" now 404's instead of "not parsed yet".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9513
Differential Revision: https://secure.phabricator.com/D14239
Summary:
Ref T9252. Currently, `queueTask()` accepts `$priority` as its third argument. Allow it to take a full range of `$options` instead. This API just never got updated after we expanded avialable options.
Arguably this whole API should be some kind of "TaskQueueRequest" object but I'll leave that for another day.
Test Plan:
- Grepped for `queueTask()` and verified no other callsites are affected by this API change.
- Ran some daemons.
- See also next diff.
Reviewers: hach-que, chad
Reviewed By: hach-que, chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14235
Summary:
Ref T9252. Currently, Harbormaster and Drydock work like this in some cases:
# Queue a lease for activation.
# Then, a little later, save the lease PHID somewhere.
# When the target/resource is destroyed, destroy the lease.
However, something can happen between (1) and (2). In Drydock this window is very short and the "something" would have to be a lighting strike or something similar, but in Harbormaster we wait until the resource activates to do (2) so the window can be many minutes long. In particular, a user can use "Abort Build" during those many minutes.
If they do, the target is destroyed but it doesn't yet have a record of the artifact, so the artifact isn't cleaned up.
Make these things work like this instead:
# Create a new lease and pre-generate a PHID for it.
# Save that PHID as something that needs to be cleaned up.
# Queue the lease for activation.
# When the target/resource is destroyed, destroy the lease if it exists.
This makes sure there's no step in the process where we might lose track of a lease/resource.
Also, clean up and standardize some other stuff I hit.
Test Plan:
- Stopped daemons.
- Restarted a build in Harbormaster.
- Stepped through the build one stage at a time using `bin/worker execute ...`.
- After the lease was queued, but before it activated, aborted the build.
- Processed the Harbormaster side of things only.
- Saw the lease get destroyed properly.
Reviewers: chad, hach-que
Reviewed By: hach-que
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14234
Summary:
Ref T9028. When users push a commit, then later delete it (e.g., by deleting the branch which contained it) we currently explode when trying to view it.
Instead, degrade gradually if some information is not available.
Test Plan:
- Looked at valid commits with parents, refs, branches and merges.
- Looked at invalid commits.
- Looked at a previously valid, now-deleted + gc'd commit:
{F859273}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9028
Differential Revision: https://secure.phabricator.com/D14227
Summary: Ref T9478. This should probably be configurable eventually, but for now treat any 200-block status as success. Also show the result code.
Test Plan:
- Hit a bad URI, saw "HTTP 503" + failure.
- Hit a good URI, saw "HTTP 200" + success.
Reviewers: chad, hach-que
Reviewed By: chad, hach-que
Maniphest Tasks: T9478
Differential Revision: https://secure.phabricator.com/D14226
Summary:
Fixes T9500. All the code is fine in D13836, but the value of the constant got updated (from "open" to "active") and the migration still used the old value.
Correct any affected dashboards to use the proper constant.
This only affected old dashboards: newly created ones use the right constant.
Test Plan: Ran migration, verified that all active dashboards appeared on "Active Dashboards".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9500
Differential Revision: https://secure.phabricator.com/D14223
Summary:
Fixes T9494. This:
- Removes all the random GC.x.y.z config.
- Puts it all in one place that's locked and which you use `bin/garbage set-policy ...` to adjust.
- Makes every TTL-based GC configurable.
- Simplifies the code in the actual GCs.
Test Plan:
- Ran `bin/garbage collect` to collect some garbage, until it stopped collecting.
- Ran `bin/garbage set-policy ...` to shorten policy. Saw change in web UI. Ran `bin/garbage collect` again and saw it collect more garbage.
- Set policy to indefinite and saw it not collect garabge.
- Set policy to default and saw it reflected in web UI / `collect`.
- Ran `bin/phd debug trigger` and saw all GCs fire with reasonable looking queries.
- Read new docs.
{F857928}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9494
Differential Revision: https://secure.phabricator.com/D14219
Summary: Ref T9252. This variable was always wrong but we fell back to just resetting to `HEAD` before. Use the correct variable name.
Test Plan: Verified variable name.
Reviewers: chad, hach-que
Reviewed By: hach-que
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14224
Summary: Ref T9352. See D13635. Build targets can have variables already, but let builds have them too. This mostly enables future use cases (sub-builds, more sophisticated build triggers).
Test Plan: With a custom Herald rule + action like the one in T9352, updated a revision and saw it generate multiple builds with varying parameters.
Reviewers: chad, hach-que
Reviewed By: hach-que
Maniphest Tasks: T9352
Differential Revision: https://secure.phabricator.com/D14222
Summary: Ref T9494. Depends on D14216. Remove 10 copies of this code.
Test Plan: Ran `arc unit --everything`, browsed Config > Modules, clicked around Herald / etc.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9494
Differential Revision: https://secure.phabricator.com/D14217
Summary: Ref T9252. Provide some general descriptions of Drydock in the docs.
Test Plan: Reading.
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14215
Summary:
Ref T9252. This primarily allows Harbormaster to request (and Drydock to fulfill) working copies with a patch from a staging area. Doing this means we can do builds on in-review changes from `arc diff`.
This is a little cobbled-together but should basically work.
Also fix some other issues:
- Yielded, awakend workers are fine to update but could complain.
- We can't log slot lock failures to resources if we don't end up saving them.
- Killing the transaction would wipe out the log.
- Fix some TODOs, etc.
Test Plan: Ran Harbormaster builds on a local revision.
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14214
Summary:
Ref T9252. Long ago you sometimes manually created resources, so they had human-enterable names. However, users never make resources manually any more, so this field isn't really useful any more.
In particular, it means we write a lot of untranslatable strings like "Working Copy" to the database in the default locale. Instead, do the call at runtime so resource names are translatable.
Also clean up a few minor things I hit while kicking the tires here.
It's possible we might eventually want to introduce a human-choosable label so you can rename your favorite resources and this would just be a default name. I don't really have much of a use case for that yet, though, and I'm not sure there will ever be one.
Test Plan:
- Restarted a Harbormaster build, got a clean build.
- Released all leases/resources, restarted build, got a clean build with proper resource names.
Reviewers: hach-que, chad
Reviewed By: hach-que, chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14213
Summary:
Ref T9252. See companion change in D14211. This does the same thing for leases.
Particularly, most of the TODOs about error handling can just be removed because they'll do the right things by default now.
This and D14211 also move slot lock release to after resource destruction. This feels cleaner than trying to release early at release/break.
Test Plan: Restarted a Harbormaster build, got a clean build result. This needs more vetting but I'll clean up any issues as I hit them.
Reviewers: chad, hach-que
Reviewed By: hach-que
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14212
Summary:
Ref T9252. Currently, error handling behavior isn't great and a lot of errors aren't dealt with properly. Try to improve this by making default behaviors better:
- Yields, slot lock exceptions, and aggregate or proxy exceptions containing an excpetion of these types turn into yields.
- All other exceptions are considered permanent failures. They break the resource and
This feels a little bit "magical" but I want to try to get the default behaviors to align reasonably well with expectations so that blueprints mostly don't need to have a ton of error handling. This will probably need at least some refinement down the road, but it's a reasonable rule for all exception/error conditions we currently have.
Test Plan: I did a clean build, but haven't vetted this super thoroughly. Next diff will do the same thing to leases, then I'll work on stabilizing this code better.
Reviewers: chad, hach-que
Reviewed By: hach-que
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14211
Summary: Ref T9252. Add a bit more logging and improve some behaviors.
Test Plan: Restarted a build, got a good result.
Reviewers: chad, hach-que
Reviewed By: hach-que
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14210
Summary:
Ref T9252. This is the same as D14201, but for lease stuff instead of resource stuff.
This one is a little heavier but still feels pretty reasonable to me at the end of the day (worker is <1K lines and has a ton of comment stuff).
Also fixes a few random bugs I hit in the task queue.
Test Plan:
- Restarted some Harbormaster builds, saw them go through cleanly.
- Released pre-activation resources/leases.
- Probably still kinda buggy but I'll iron the details out over time.
Logs are starting to look somewhat plausible:
{F855747}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14202
Summary:
Ref T9252. Currently, Drydock Leases and Resources have several workers:
- Resources: ResourceWorker, ResourceUpdateWorker, ResourceDestroyWorker
- Leases: AllocatorWorker, LeaseWorker, LeaseUpdateWorker, LeaseDestroyWorker
This is kind of a lot of stuff, and it creates some problems.
In particular, leases and resources in early lifecycle phases (pending/allocating/acquiring) can't process commands yet, because that code is only in the "UpdateWorker" classes. If they aren't able to move forward because of a bug, they also can't be released because they can't react to the release command until later in their lifecycle. This creates a soft hang where I have to go wipe stuff out of the database since there's no other way to get rid of it.
Instead, I want leases and resources to be releasable from any (pre-release / pre-destroy) phase of their lifecycle. To support this, all the workers before the "UpdateWorker" need to be able to process commands.
A second, similar issue is that logging and exception handling behaviors are underpowered right now. Elsewhere I began improving this, but ran into issues where all of the workers needed to share very similar exception code. Merging them will make this future change simpler.
This diff fixes this for resources: it merges the Worker, UpdateWorker and DestroyWorker logic into UpdateWorker and throws away the other two workers.
Test Plan: Nothing substantive yet, see next diff. I'll do the same thing for Leases, then test both more thoroughly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14201
Summary: Ref T9252. Make log types modular so they can be translated and have complicated rendering logic if necessary (currently, none have this).
Test Plan: {F855330}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14198
Summary:
Ref T9252. Drydock logs are almost exclusively useful as a diagnostic tool for debugging immediate problems, so GC them fairly aggressively.
(I expect 99% of the usefulness of these logs to be within the first 24 hours, basically "why isn't my thing working". I can't really think of any cases where having old logs would be useful.)
Test Plan:
- Ran GC, saw it hit the log table (with no effect).
- Changed TTL from 30 days to 30 seconds, ran GC, saw it wipe recent logs.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14197
Summary:
Ref T9252. Several general changes here:
- Moves logs to use PHIDs instead of IDs. This generally improves flexibility (for example, it's a lot easier to render handles).
- Adds `blueprintPHID` to logs. Although you can usually figure this out from the leasePHID or resourcePHID, it lets us query relevant logs on Blueprint views.
- Instead of making logs a top-level object, make them strictly a sub-object of Blueprints, Resources and Leases. So you go Drydock > Lease > Logs, etc., to get to logs.
- I might restore the "everything" view eventually, but it doesn't interact well with policies and I'm not sure it's very useful. A policy-violating `bin/drydock log` might be cleaner.
- Policy-wise, we always show you that logs exist, we just don't show you log content if it's about something you can't see. This is similar to seeing restricted handles in other applications.
- Instead of just having a message, give logs "type" + "data". This will let logs be more structured and translatable. This is similar to recent changes to Herald which seem to have worked well.
Test Plan:
Added some placeholder log writes, viewed those logs in the UI.
{F855199}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14196
Summary: Updates to their new logo
Test Plan: review in photoshop
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14199
Summary: Ref T9252. We're currently resetting to the local branch, but should be resetting to the origin branch.
Test Plan: Restarted a build, had it run `git show`, saw proper HEAD.
Reviewers: chad
Reviewed By: chad
Subscribers: hach-que
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14194
Summary: Fixes T9483. This bookname is `phabcontrib`, not `contributor`.
Test Plan: `grep` / clicked these links.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9483
Differential Revision: https://secure.phabricator.com/D14195
Summary: Ref T9271, maybe fixes it. This restores feed publishing for answers (broken in D13951) and sends the author of the question an email for new answers. Also, unsure how to pull all question subsribers to the answer email, or is it automagical?
Test Plan: notchad asks a question, chad answers, log into notchad and see that mail was delivered, see feed story.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: revi, Korvin
Maniphest Tasks: T9271
Differential Revision: https://secure.phabricator.com/D14171
Summary: This is to make it more obvious how to ignore a folder that may be at the root, and it resolves https://secure.phabricator.com/T8894
Test Plan: Just a documentation change
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, nornagon
Differential Revision: https://secure.phabricator.com/D14193
Summary: I haven't regenerated this for a while and it makes instances and unit tests a little faster.
Test Plan:
- Manually reviewed changes for sanity.
- Ran `arc unit --everything`.
- Observed runtime drop from ~15-16 seconds to ~12-13 seconds.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14192
Summary: Replaces D13687. Leases track an owner but don't currently show it.
Test Plan:
Looked at a lease.
{F851223}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14191
Summary: Fixes T9481. If the viewer does not have access to Differential (for example, because it is not installed), hide the "Revision" column in Diffusion.
Test Plan:
- Viewed history, saw "Revision" column.
- Uninstalled Differential, reloaded, no "Revision" column.
Reviewers: chad
Reviewed By: chad
Subscribers: revi
Maniphest Tasks: T9481
Differential Revision: https://secure.phabricator.com/D14188
Summary:
Ref T9482. This button goes to the wrong place and this table conditionally hides itself so I missed it.
Instead:
- Always show the table, with an empty string if there are no relevant commits.
- Link to a working UI.
Test Plan: Saw table. Clicked button.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9482
Differential Revision: https://secure.phabricator.com/D14189
Summary:
Fixes T9479. Currently, `@aaaaaaaa` may try to match as a commit hash, and `@C123456` may try to match as a Countdown reference. These should only match as user mentions.
Prevent object mention rules from matching after `@`. We already prevent them after `-` and `#`, and already prevented the username rule after `@` (i.e., preventing `@@user`).
Test Plan:
Created some "interesting" users locally and `@mentioned` them:
{F850779}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9479
Differential Revision: https://secure.phabricator.com/D14186
Summary:
Ref T9123. After recent changes, viewing a live build log from the web UI throws a CSRF exception.
Check `start` ("this object is an active log"), not `live` ("this log is open somewhere").
Test Plan: Will push / etc.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9123
Differential Revision: https://secure.phabricator.com/D14185
Summary:
Ref T9123. The handling in D14183 didn't deal with new field values properly.
Make all this handling more consistent.
Test Plan: Created a new WorkignCopy build plan with some repos.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9123
Differential Revision: https://secure.phabricator.com/D14184
Summary:
Ref T9123. To run upstream builds in Harbormaster/Drydock, we need to be able to check out `libphutil`, `arcanist` and `phabricator` next to one another.
This adds an "Also Clone: ..." field to Harbormaster working copy build steps so I can type all three repos into it and get a proper clone with everything we need.
This is somewhat upstream-centric and a bit narrow, but I don't think it's totally unreasonable, and most of the underlying stuff is relatively general.
This adds some more typechecking and improves data/type handling for custom fields, too. In particular, it prevents users from entering an invalid/restricted value in a field (for example, you can't "Also Clone" a repository you don't have permission to see).
Test Plan: Restarted build, got a Drydock resource with multiple repositories in it.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9123
Differential Revision: https://secure.phabricator.com/D14183
Summary:
Fixes T8728. As far as I can tell, I simply got this wrong in D11826. This is not the proper name for the preference.
That change primarily focused on the "spammy junk during import" issue, and the code did get the importing flag right. It looks like my testing in D11827 focused on "during import" and just missed this case.
Test Plan: Grepped for `disable-herald`. Grepped for `herald-disable`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8728
Differential Revision: https://secure.phabricator.com/D14181
Summary:
Ref T9252. For building Phabricator itself, we need to have `libphutil/`, `arcanist/` and `phabricator/` next to one another on disk.
Expand the Drydock WorkingCopy resource so that it can have multiple repositories if the caller needs them.
I'm not sure if I'm going to put the actual config for this in Harbormaster or Drydock yet, but the WorkingCopy resource itself should work the same way in either case.
Test Plan: Restarted a Harbormaster build which leases a working copy, saw it build as expected.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14180
Summary:
Ref T9252. Currently, Harbormaster does this when trying to acquire a working copy:
- Ask for a working copy.
- Yield for 15 seconds.
- Check if we have a working copy yet.
That's OK, but Drydock takes ~1s to acquire a working copy lease if a resource is already available, so we end up doing this:
- T+0: Ask for a working copy.
- T+0: Yield for 15 seconds.
- T+1: Working copy lease activates.
- T+15: Working copy lease is used.
- T+16: Build finishes.
So we end up spending about 2 seconds doing work and 14 seconds sleeping.
One way to fix this would be to fiddle with the yield duration, so we yield for 1, 2, 4, ... seconds or something. This probably isn't a bad idea for longer leases (i.e., wait for 15, 30, 45 ... seconds or similar) but it implies a lot of churn for short leases.
Instead, let tasks "awaken" other tasks when they complete. The "awaken" operation means: if a task is in a yielded state (no failures, no owner, explicitly yielded, future expires time), pretend it only yielded until right now instead of whenever it really yielded to.
Basically, this rewrites history so that even though Harbormaster did a `yield(15)`, we pretend it did a `yield(4)` after we activate the lease if lease activation took 4 seconds.
If this misses, it's fine: we fall back to the normal yield behavior and things move forward normally a few seconds later.
If it hits, we get a more nimble process pretty cleanly.
Test Plan:
- Restarted a build plan (lease working copy + run `ls`) with this patch no-op'd, took about 16 seconds.
- Restarted a build plan with this patch active, took about 1 second.
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14178
Summary: Ref T9252. Show the user when a resource or lease has a pending release command in queue.
Test Plan: Released a resource and lease from the web UI. In both cases, saw a "releasing" tag and the action disable.
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14177
Summary:
Fixes T6569. This implements an expiry mechanism for Drydock resources which parallels the mechanism for leases.
A few things are missing that we'll probably need in the future:
- An "EXPIRES" command to update the expiration time. This would let resources be permanent while leased, then expire after, say, 24 hours without any leases.
- A callback like `shouldActuallyExpireRightNow()` for resources and leases that lets them decide not to expire at the last second.
- A callback like `didAcquireLease()` for resource blueprints, to parallel `didReleaseLease()`, letting them clear or extend their timer.
However, this stuff would mostly just let us tune behaviors, not really open up new capabilities.
Test Plan: Changed host resources to expire after 60 seconds, leased one, saw it vanish 60 seconds later.
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T6569
Differential Revision: https://secure.phabricator.com/D14176
Summary: Fixes T9474
Test Plan: Make a poll, log out, still see it.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9474
Differential Revision: https://secure.phabricator.com/D14179
Summary: Fixes T5991. If //all requested documents// failed to index, consider this a catastrophic failure and exit with an error code.
Test Plan:
- Ran `bin/search index --type TASK`, observed successful exit despite a small number of un-indexable documents.
- Ran `bin/search index PHID-TASK-xxx` for an invalid task, observed exception on exit after complete failure.
- Ran normal indexing through daemons.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5991
Differential Revision: https://secure.phabricator.com/D14174
Summary: Ref T5991. See D14116. We are consistent but nonstandard in our use of exit codes. This document explains what we use exit codes for and why we do this.
Test Plan: Read it.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5991
Differential Revision: https://secure.phabricator.com/D14173
Summary: Fixes T9260. That task has a good description of the issue.
Test Plan: Followed steps in T9260 to reproduce the issue. Applied patch; issue went away.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9260
Differential Revision: https://secure.phabricator.com/D14169
Summary: Ref T9272. This doesn't fix anything, just a little cleanup while I was looking at it.
Test Plan: Clicked "Show Details" on a couple description changes, got the same effect for less code.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9272
Differential Revision: https://secure.phabricator.com/D14168
Summary: Fixes T9312. This is a bit fluff, but does simplify the view controller slightly and seems reasonable/useful in general.
Test Plan: Clicked "View Raw File" on a paste, got redirected to the raw file via a stable URI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9312
Differential Revision: https://secure.phabricator.com/D14167
