Summary:
Fixes T10778. This is a result of T10262: when we save a form configuration and adjust the policy, we try to scramble attached file secrets.
There aren't going to be any attached files, but there's also no edge table, so we fail.
We could skip this code, but we'll likely need an edge table here sooner or later so it's probably simpler in the long run to just add an empty one.
Test Plan:
- Ran `bin/storage upgrade`, got a clean bill of health.
- Saved a form configuration after making a policy edit, no more `edge` exception.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10778
Differential Revision: https://secure.phabricator.com/D15803
Summary:
Ref T10860. This allows us to recover if the connection to the database is lost during a push.
If we lose the connection to the master database during a push, we would previously freeze the repository. This is very safe, but not very operator-friendly since you have to go manually unfreeze it.
We don't need to be quite this aggressive about freezing things. The repository state is still consistent after we've "upgraded" the lock by setting `isWriting = 1`, so we're actually fine even if we lost the global lock.
Instead of just freezing the repository immediately, sit there in a loop waiting for the master to come back up for a few minutes. If it recovers, we can release the lock and everything will be OK again.
Basically, the changes are:
- If we can't release the lock at first, sit in a loop trying really hard to release it for a while.
- Add a unique lock identifier so we can be certain we're only releasing //our// lock no matter what else is going on.
- Do the version reads on the same connection holding the lock, so we can be sure we haven't lost the lock before we do that read.
Test Plan:
- Added a `sleep(10)` after accepting the write but before releasing the lock so I could run `mysqld stop` and force this issue to occur.
- Pushed like this:
```
$ echo D >> record && git commit -am D && git push
[master 707ecc3] D
1 file changed, 1 insertion(+)
# Push received by "local001.phacility.net", forwarding to cluster host.
# Waiting up to 120 second(s) for a cluster write lock...
# Acquired write lock immediately.
# Waiting up to 120 second(s) for a cluster read lock on "local001.phacility.net"...
# Acquired read lock immediately.
# Device "local001.phacility.net" is already a cluster leader and does not need to be synchronized.
# Ready to receive on cluster host "local001.phacility.net".
Counting objects: 3, done.
Delta compression using up to 8 threads.
Compressing objects: 100% (2/2), done.
Writing objects: 100% (3/3), 254 bytes | 0 bytes/s, done.
Total 3 (delta 1), reused 0 (delta 0)
BEGIN SLEEP
```
- Here, I stopped `mysqld` from the CLI in another terminal window.
```
END SLEEP
# CRITICAL. Failed to release cluster write lock!
# The connection to the master database was lost while receiving the write.
# This process will spend 300 more second(s) attempting to recover, then give up.
```
- Here, I started `mysqld` again.
```
# RECOVERED. Link to master database was restored.
# Released cluster write lock.
To ssh://local@localvault.phacility.com/diffusion/26/locktopia.git
2cbf87c..707ecc3 master -> master
```
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10860
Differential Revision: https://secure.phabricator.com/D15792
Summary: Ref T4292. When we write a push log, also log which node received the request.
Test Plan: {F1230467}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15759
Summary: Ref T4292. This will let the UI and future `bin/repository` tools give administrators more tools to understand problems when reporting or resolving them.
Test Plan:
- Pushed fully clean repository.
- Pushed previously-pushed repository.
- Forced write to abort, inspected useful information in the database.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15748
Summary:
Fixes T10830.
- The return code from `storage adjust` did not propagate correct.
- There was one column issue which I missed the first time around because I had a bunch of unrelated stuff locally.
Test Plan:
- Ran `bin/storage upgrade -f` with failures, used `echo $?` to make sure it exited nonzero.
- Got fully clean `bin/storage adjust` by dropping all my extra local tables.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10830
Differential Revision: https://secure.phabricator.com/D15746
Summary:
Fixes T10830. Ref T10366. I wasn't writing to this table yet so I didn't build it, but the fact that `bin/storage adjust` would complain slipped my mind.
- Add the table.
- Make the tests run `adjust`. This is a little slow (a few extra seconds) but we could eventually move some steps like this to run server-side only.
Test Plan: Ran `bin/storage upgrade -f`, got a clean `adjust`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10366, T10830
Differential Revision: https://secure.phabricator.com/D15744
Summary:
Ref T4292. This mostly implements the locking/versioning logic for multi-master repositories. It is only active on Git SSH pathways, and doesn't actually do anything useful yet: it just does bookkeeping so far.
When we read (e.g., `git fetch`) the logic goes like this:
- Get the read lock (unique to device + repository).
- Read all the versions of the repository on every other device.
- If any node has a newer version:
- Fetch the newer version.
- Increment our version to be the same as the version we fetched.
- Release the read lock.
- Actually do the fetch.
This makes sure that any time you do a read, you always read the most recently acknowledged write. You may have to wait for an internal fetch to happen (this isn't actually implemented yet) but the operation will always work like you expect it to.
When we write (e.g., `git push`) the logic goes like this:
- Get the write lock (unique to the repository).
- Do all the read steps so we're up to date.
- Mark a write pending.
- Do the actual write.
- Bump our version and mark our write finished.
- Release the write lock.
This allows you to write to any replica. Again, you might have to wait for a fetch first, but everything will work like you expect.
There's one notable failure mode here: if the network connection between the repository node and the database fails during the write, the write lock might be released even though a write is ongoing.
The "isWriting" column protects against that, by staying locked if we lose our connection to the database. This will currently "freeze" the repository (prevent any new writes) until an administrator can sort things out, since it'd dangerous to continue doing writes (we may lose data).
(Since we won't actually acknowledge the write, I think, we could probably smooth this out a bit and make it self-healing //most// of the time: basically, have the broken node rewind itself by updating from another good node. But that's a little more complex.)
Test Plan:
- Pushed changes to a cluster-mode repository.
- Viewed web interface, saw "writing" flag and version changes.
- Pulled changes.
- Faked various failures, got sensible states.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15688
Summary: Closes T10690
Test Plan: Open Badges application, go to Advanced Search, search for a badge by its name and see result.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Maniphest Tasks: T10690
Differential Revision: https://secure.phabricator.com/D15656
Summary: Ref T6027. This converts the old transaction records to the new format so we don't have to keep legacy code around.
Test Plan: Migrated tasks, browsed around, looked at transaction records, didn't see any issues.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6027
Differential Revision: https://secure.phabricator.com/D15637
Summary: Ref T7303. This interaction is very oldschool; modernize it to enable/disable instead of "nuke from orbit".
Test Plan:
- Enabled applications.
- Disabled applications.
- Viewed applications in list view.
- Generated new tokens.
- Tried to use a token from a disabled application (got rebuffed).
- Tried to use a token from an enabled application (worked fine).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7303
Differential Revision: https://secure.phabricator.com/D15620
Summary: Ref T7303. This application is currently stone-age tech (no transactions, hard "delete" action). Bring it up to modern specs.
Test Plan:
- Created and edited an OAuth application.
- Viewed transaction record.
- Tried to create something with no name, invalid redirect URI, etc. Was gently rebuffed with detailed explanatory errors.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7303
Differential Revision: https://secure.phabricator.com/D15609
Summary: Adds basic commenting to Fund Initiatives.
Test Plan: Leave a comment, see comment.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15554
Summary:
Ref T10537. Currently, Nuance has a `NuanceRequestor` object, intended to represent the external user who created content (e.g., a GitHub account or a Twitter account or whatever).
This object is currently almost unused, and its design predates Doorkeeper. In D15541, I chose to use doorkeeper objects instead of NuanceRequestor objects to represent requestors.
I don't currently anticipate a need for such an object, given that we have Doorkeeper. If we do need it in the future for some reason, it would be fairly easy to restore it, create a requestor type which wraps a Doorkeeper object, and then migrate. Not super thrilling to do that, but not a huge mess.
`NuanceItem` still has a `requestorPHID`, but this is now a less formal object PHID instead of a more formal Requestor-object PHID, and holds a doorkeeper exeternal object PHID for GitHub events.
Test Plan:
- Grepped for `nuancerequestor`.
- Ran `bin/storage upgrade -f`.
- Grepped for `requestor`, remaining uses of this term seem reasonable/correct.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10537
Differential Revision: https://secure.phabricator.com/D15546
Summary: Ref T8996, Convert badge recipients from Edges to actual BadgeAward objects
Test Plan: Create badge, award it to recipient. Make sure adding/removing recipients works. (Still need to migrate exisiting recipients to new table and need to create activity feed blurbs)
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: chad, Korvin
Maniphest Tasks: T8996
Differential Revision: https://secure.phabricator.com/D15014
Summary:
Ref T10537. For Nuance, I want to introduce new sources (like "GitHub" or "GitHub via Nuance" or something) but this needs to modularize eventually.
Split ContentSource apart so applications can add new content sources.
Test Plan:
This change has huge surface area, so I'll hold it until post-release. I think it's fairly safe (and if it does break anything, the breaks should be fatals, not anything subtle or difficult to fix), there's just no reason not to hold it for a few hours.
- Viewed new module page.
- Grepped for all removed functions/constants.
- Viewed some transactions.
- Hovered over timestamps to get content source details.
- Added a comment via Conduit.
- Added a comment via web.
- Ran `bin/storage upgrade --namespace XXXXX --no-quickstart -f` to re-run all historic migrations.
- Generated some objects with `bin/lipsum`.
- Ran a bulk job on some tasks.
- Ran unit tests.
{F1190182}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10537
Differential Revision: https://secure.phabricator.com/D15521
Summary:
Ref T10537. Generally, when users interact with Nuance items we'll dump a command into a queue and apply it in the background. This avoids race conditions with multiple users interacting with an item, which Nuance is more subject to than other applications because it has an import/external component.
The "sync" command doesn't actually do anything yet.
Test Plan: {F1186365}
Reviewers: chad
Reviewed By: chad
Subscribers: Luke081515.2
Maniphest Tasks: T10537
Differential Revision: https://secure.phabricator.com/D15506
Summary:
Ref T10537. These are objects which are bound to some external object, like a Maniphest task which is a representation of a GitHub issue.
This doesn't do much yet and may change, but my thinking is:
- I'm putting these on-object instead of on edges because I think we want to actively change the UI for them (e.g., clearly call out that the object is bridged) but don't want every page to need to do extra queries in the common case where zero bridged objects exist anywhere in the system.
- I'm making these one-to-one, more or less: an issue can't be bridged to a bunch of tasks, nor can a bunch of tasks be bridged to a single issue. Pretty sure this makes sense? I can't come up with any reasonable, realistic cases where you want a single GitHub issue to publish to multiple different tasks in Maniphest.
- Technically, one type of each bridgable object could be bridged, but I expect this to never actually occur. Hopefully.
Test Plan: Ran storage upgrade, loaded some pages.
Reviewers: chad
Reviewed By: chad
Subscribers: Luke081515.2
Maniphest Tasks: T10537
Differential Revision: https://secure.phabricator.com/D15502
Summary:
Ref T7789. This implements:
- A new table to store the `<objectHash, filePHID>` relationship between Git LFS files and Phabricator file objects.
- A basic response to `batch` commands, which return actions for a list of files.
Test Plan:
Ran `git lfs push origin master`, got a little further than previously:
```
epriestley@orbital ~/dev/scratch/poemslocal $ git lfs push origin master
Git LFS: (2 of 1 files) 174.24 KB / 87.12 KB
Git LFS operation "upload/b7e0aeb82a03d627c6aa5fc1bbfd454b6789d9d9affc8607d40168fa18cf6c69" is not supported by this server.
Git LFS operation "upload/b7e0aeb82a03d627c6aa5fc1bbfd454b6789d9d9affc8607d40168fa18cf6c69" is not supported by this server.
```
With `GIT_TRACE=1`, this shows the batch part of the API going through.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7789
Differential Revision: https://secure.phabricator.com/D15489
Summary:
Ref T10603. This makes minor updates to temporary tokens:
- Rename `objectPHID` (which is sometimes used to store some other kind of identifier instead of a PHID) to `tokenResource` (i.e., which resource does this token permit access to?).
- Add a `userPHID` column. For LFS tokens and some other types of tokens, I want to bind the token to both a resource (like a repository) and a user.
- Add a `properties` column. This makes tokens more flexible and supports custom behavior (like scoping LFS tokens even more tightly).
Test Plan:
- Ran `bin/storage upgrade -f`, got a clean upgrade.
- Viewed one-time tokens.
- Revoked one token.
- Revoked all tokens.
- Performed a one-time login.
- Performed a password reset.
- Added an MFA token.
- Removed an MFA token.
- Used a file token to view a file.
- Verified file token was removed after viewing file.
- Linked my account to an OAuth1 account (Twitter).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10603
Differential Revision: https://secure.phabricator.com/D15478
Summary:
Ref T10537. Ref T10538. This polls the GitHub events API and creates Nuance items from the raw data.
It does nothing useful with them.
Test Plan:
- Polled GitHub.
- Saw some items get created.
- X-Poll-Interval seemed to work.
- ETag seemed to work.
- Recognizing when we hit items we've already seen seemed to work.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10537, T10538
Differential Revision: https://secure.phabricator.com/D15440
Summary:
Ref T10537. More infrastructure:
- Put a `bin/nuance` in place with `bin/nuance import`. This has no useful behavior yet.
- Allow sources to be searched by substring. This supports `bin/nuance import --source whatever` so you don't have to dig up PHIDs.
Test Plan:
- Applied migrations.
- Ran `bin/nuance import --source ...` (no meaningful effect, but works fine).
- Searched for sources by substring in the UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10537
Differential Revision: https://secure.phabricator.com/D15436
Summary:
Ref T10537. Some sources (like the future "GitHub Repository" source) need to poll remotes.
- Provide a mechanism for sources to emit import cursors.
- Hook them into the trigger daemon so they'll fire periodically.
- Provide some storage.
This diff does nothing useful or interesting, and is pure infrastructure.
Test Plan:
- Ran `bin/storage upgrade -f`, no adjustment issues.
- Poked around Nuance.
- Ran the trigger daemon, verified it didn't crash and checked for Nuance stuff to do.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10537
Differential Revision: https://secure.phabricator.com/D15435
Summary:
Ref T10457.
- Let blueprints be tagged so you can search and annotate them a little more easily.
- Give each blueprint type an optional icon to make things a little easier to parse visually.
Test Plan:
- Tagged blueprints.
- Searched by tags.
- Looked at nice little icons.
{F1139712}
Reviewers: chad
Reviewed By: chad
Subscribers: yelirekim
Maniphest Tasks: T10457
Differential Revision: https://secure.phabricator.com/D15392
Summary:
Ref T10457. The ngram indexing seems to be working well; extend it into Drydock.
Also clean up the list controller a little bit.
Test Plan:
- Ran migrations.
- Searched for blueprints by name.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10457
Differential Revision: https://secure.phabricator.com/D15389
Summary: Ref T10457. Allow build plans to be queried by name.
Test Plan:
- Searched for plans by name.
- Renamed a plan, searched for new name.
{F1133085}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10457
Differential Revision: https://secure.phabricator.com/D15359
Summary:
Ref T10449. Currently, we store classes (like "AlmanacClusterRepositoryServiceType") in the database.
Instead, store types (like "cluster.repository").
This is a small change, but types are a little more flexible (they let us freely reanme classes), a little cleaner (fewer magic strings in the codebase), and a little better for API usage (they're more human readable).
Make this minor usability change now, before we unprototype.
Also make services searchable by type.
Also remove old Almanac API endpoints.
Test Plan:
- Ran migration, verified all data migrated properly.
- Created, edited, rebound, and changed properties of services.
- Searched for services by service type.
- Reviewed available Conduit methods.
Reviewers: chad
Reviewed By: chad
Subscribers: yelirekim
Maniphest Tasks: T10449
Differential Revision: https://secure.phabricator.com/D15346
Summary:
Fixes T9762. Ref T10246.
**Disabling Bindings**: Previously, there was no formal way to disable bindings. The internal callers sometimes check some informal property on the binding, but this is a common need and deserves first-class support in the UI. Allow bindings to be disabled.
**Deleting Interfaces**: Previously, you could not delete interfaces. Now, you can delete unused interfaces.
Also some minor cleanup and slightly less mysterious documentation.
Test Plan: Disabled bindings and deleted interfaces.
Reviewers: chad
Reviewed By: chad
Subscribers: yelirekim
Maniphest Tasks: T9762, T10246
Differential Revision: https://secure.phabricator.com/D15345
Summary:
Fixes T6741. Ref T10246. Broadly, we want to protect Almanac cluster services:
- Today, against users in the Phacility cluster accidentally breaking their own instances.
- In the future, against attackers compromising administrative accounts and adding a new "cluster database" which points at hardware they control.
The way this works right now is really complicated: there's a global "can create cluster services" setting, and then separate per-service and per-device locks.
Instead, change "Can Create Cluster Services" into "Can Manage Cluster Services". Require this permission (in addition to normal permissions) to edit or create any cluster service.
This permission can be locked to "No One" via config (as we do in the Phacility cluster) so we only need this one simple setting.
There's also zero reason to individually lock //some// of the cluster services.
Also improve extended policy errors.
The UI here is still a little heavy-handed, but should be good enough for the moment.
Test Plan:
- Ran migrations.
- Verified that cluster services and bindings reported that they belonged to the cluster.
- Edited a cluster binding.
- Verified that the bound device was marked as a cluster device
- Moved a cluster binding, verified the old device was unmarked as a cluster device.
- Tried to edit a cluster device as an unprivileged user, got a sensible error.
{F1126552}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6741, T10246
Differential Revision: https://secure.phabricator.com/D15339
Summary:
I'm having trouble figuring out exactly what the timeframe on this was, but for a while in November we were not writing edges between pastes and their attached files correctly.
An example of this on this install is here:
https://secure.phabricator.com/P1893
That will start working once the migration runs, but until it does it shows this:
{F1126605}
This got fixed so recent stuff works fine, but it looks like WMF updated while the bug was active so they have more affected pastes than we do (we only have about 10).
Test Plan:
Ran this query to find pastes with missing edges:
```
select id, FROM_UNIXTIME(p.dateCreated) from pastebin_paste p LEFT JOIN edge ON edge.src = p.phid AND edge.type = 25 WHERE edge.dst IS NULL order by id;
```
Ran the migration.
Verified the edges were fixed.
Viewed one of the affected pastes, things now worked properly.
Reviewers: chad
Reviewed By: chad
Subscribers: 20after4
Differential Revision: https://secure.phabricator.com/D15340
Summary:
Fixes T10410. Immediate impact of this is that you can now actually delete properties from Almanac services, devices and bindings.
The meat of the change is switching from CustomField to EditEngine for most of the actual editing logic. CustomField creates a lot of problems with using EditEngine for everything else (D15326), and weird, hard-to-resolve bugs like this one (not being able to delete stuff).
Using EditEngine to do this stuff instead seems like it works out much better -- I did this in ProfilePanel first and am happy with how it looks.
This also makes the internal storage for properties JSON instead of raw text.
Test Plan:
- Created, edited and deleted properties on services, devices and bindings.
- Edited and reset builtin properties on repository services.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10410
Differential Revision: https://secure.phabricator.com/D15327
Summary:
Ref T6741. Ref T10246.
Root problem: to provide Drydock in the cluster, we need to expose Almanac, and doing so would let users accidentally or intentionally create a bunch of `repo006.phacility.net` devices/services which could conflict with the real ones we manage.
There's currently no way to say "you can't create anything named `*.blah.net`". This adds "namespaces", which let you do that (well, not yet, but they will after the next diff).
After the next diff, if you try to create `repo003.phacility.net`, but the namespace `phacility.net` already exists and you don't have permission to edit it, you'll be asked to choose a different name.
Also various modernizations and some new docs.
Test Plan:
- Created cool namespaces like `this.computer`.
- Almanac namespaces don't actually enforce policies yet.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6741, T10246
Differential Revision: https://secure.phabricator.com/D15324
Summary: Ref T6741. Ref T10246. This is largely modernization, but will partially support namespace locking in Almanac.
Test Plan:
Searched for Almanac networks by name substring.
{F1121740}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6741, T10246
Differential Revision: https://secure.phabricator.com/D15322
Summary: Ref T10246. Build an ngram index for Almanac services, and use it to support improved search.
Test Plan: {F1121725}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10246
Differential Revision: https://secure.phabricator.com/D15321
Summary:
Ref T10205. Ref T10246. This is general modernization, but also supports fixing the interface datasource in T10205.
- Update Query.
- Update SearchEngine.
- Use an ngrams index for searching names efficiently.
Test Plan:
- Ran migrations.
- Searched Almanac devices by name.
- Created a new device, searched for it by name.
{F1121303}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10205, T10246
Differential Revision: https://secure.phabricator.com/D15319
Summary:
Ref T4245. This could still use a little UI smoothing, but:
- Don't require a callsign on the create flow (you can add one later in "Edit Basic Information" if you want).
- Allow existing callsigns to be removed.
Test Plan:
- Created a new repository with no callsign.
- Cloned it; pushed to it.
- Browsed around Diffusion a bunch.
- Visited a commit URI.
- Added a callsign to it.
- Removed the callsign again.
- Referenced it with `R22` in remarkup.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D15305
Summary: Fixes T10360. In modern code, most of the meat is automatic.
Test Plan:
- Edited view policy and edit policy from web UI.
- Viewed package, saw policy badge in header.
- Tried to edit a package as a user without permission, got appropriate disabled states and errors.
- Changed policies via Conduit.
- Tried to view a package as a user without permission.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10360
Differential Revision: https://secure.phabricator.com/D15275
Summary:
Fixes T6641. This allows users who have permission to edit a project to use "Save as Default" to save the current order and filter as defaults for the project.
These are per-board defaults, and apply to all users. The rationale is that I think the best default ordering/filtering depends mostly on the board, not the viewer.
This seems to align with most requests in the task, although rationale is a bit light. But, for example, it seems reasonable you might want to change the default filter to "All Tasks" on a sprint board, so you can see what's in the "Done" column.
This also fixes some minor issues I ran into:
- Herald could hit an issue while checking permissions if the project was a subproject and a non-member had a triggering rule.
- "Advanced filter..." did not prefill with the current filter.
Test Plan:
- Set default order and filter on a workboard.
- Reloaded board, saw settings stick.
- Tried to edit a board as an unprivileged user (disabled menu items, error).
- Reviewed transaction log.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6641
Differential Revision: https://secure.phabricator.com/D15260
Summary:
Currently never read or written.
Supports fractions.
There's no such thing as an unsigned double so this also supports negative values, technically, although I'll eventually prevent this in the UI.
Test Plan: `bin/storage upgrade`, then created and edited a task. Nothing was different.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15218
Summary:
Before edges, we stored some of this stuff directly on tasks.
- `attached` was migrated to edges in Jan 2013.
- `projectPHIDs` was never used, as far as I can tell?
- `ccPHIDs` was migrated away and dropped more than a year ago.
None of these columns are used in modern code (instead, modern code uses edges).
Test Plan: `grep`, browsed around, `bin/storage upgrade`, unit tests.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15216
Summary:
No way to set photos yet, but if you magic them in they work.
Primarily, this consolidates rendering logic so the move + edit + view controllers all run the same code to do tags / cover photos.
Test Plan: {F1095870}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15201
Summary:
Ref T10010. These aren't perfect but I think (?) they aren't horribly broken.
- When a project is a parent project, destroy (as far as the user can tell) any custom columns.
- When a project has milestones, automatically generate columns on the project's workboard (if it has a workboard).
- When you move tasks between milestones, add the proper milestone tag.
- When you move tasks out of milestones back into the backlog, add the proper parent project tag.
- (Plenty of UI / design stuff to adjust.)
Test Plan:
- Dragged stuff between milestone columns.
- Used a normal workboard.
- Wasn't able to find any egregiously bad cases that did anything terrible.
{F1088224}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D15171
Summary: Fixes T10259. There was no real reason to do this `ip2long()` stuff in the first place -- it's very slightly smaller, but won't work with ipv6 and the savings are miniscule.
Test Plan:
- Ran migration.
- Viewed logs in web UI.
- Pulled and pushed.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10259
Differential Revision: https://secure.phabricator.com/D15165
Summary:
Ref T10228. This is currently quite limited:
- No UI.
- No SSH support.
My primary goal is to debug the issue in T10228. In the long run we can expand this to be a bit fancier.
Test Plan:
Made various valid and invalid clones, got sucess responses and not-so-successful responses, viewed the log table for general corresponding messages and broad sanity.
Ran GC via `bin/phd debug trigger`, no issues.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10228
Differential Revision: https://secure.phabricator.com/D15127
Summary: Ref T10054. This primarily improves aesthetics and consistency for member/wathcher lists in projects.
Test Plan:
{F1068873}
{F1068874}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15103
Summary:
Ref T10054. Ref T6961.
- Existing projects with workboards had "Workboard" as the default menu item. Retain this behavior.
- Populate the recently-added `hasWorkboard` flag so we can do a couple of things a little faster (see T6961).
Test Plan:
- Ran migration.
- Verified a bunch of projects looked sensible/correct after the migration.
- Created a workboard, verified `hasWorkboard` got set properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6961, T10054
Differential Revision: https://secure.phabricator.com/D15093
Summary:
Ref T10054. Ref T6113. Users can currently subscribe to projects, which causes them to receive:
# mail about project membership changes, description changes, etc; and
# mail to the project, e.g. when the project is added as a subscriber on a task, or a reviewer on a revision.
Almost no one cares about (1), and after D15061 you can use Herald to get this stuff if you really want it. (It will get progressively more annoying in the future with external membership sources causing automated project membership updates.)
A lot of users are confused about (2) and how it relates to membership, watching, etc, and most users who want (2) don't want (1).
Instead, add an explicit option for this and explain what it does.
This is fairly verbose but I've hidden it on the member/watch screen, which is now the "explain how projects work" screen, I guess.
Test Plan:
{F1064929}
{F1064930}
{F1064931}
- Disabled/enabled mail for a project.
- Sent mail to a project with mail disabled, verified I didn't get a copy.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6113, T10054
Differential Revision: https://secure.phabricator.com/D15065
Summary: This hasn't been updated in about 6 months, and keeping it fresh makes tests and instance launches a little faster.
Test Plan: Ran `storage upgrade` on clean namespaces before and after patch, got ~5.6s before and ~4.2s after.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15055
Summary:
Ref T10054. This does a big chunk of the legwork to let users reconfigure profile menus (currently, just project menus).
This includes:
- Editing builtin items (e.g., you can rename the default items).
- Creating new items (for now, only links are available).
This does not yet include:
- Hiding items.
- Reordering items.
- Lots of fancy types of items (dashboards, etc).
- Any UI changes.
- Documentation (does feature: TODO link for documentation).
Test Plan:
{F1060695}
{F1060696}
{F1060697}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15010
Summary:
Ref T4705 (there are also some other adjacent related tasks dealing with URIs).
Currently, we issue a "get repositories matching URIs: ..." query by loading every possible repository and then checking their URIs in PHP.
Instead, put URIs in a separate table. I plan for each repository to potentially have multiple URIs soon, so this prepares for that.
Test Plan:
- Ran migrations.
- Looked at index table, made sure it appeared sensible.
- Ran some queries by `uri` to find repositories, found the repositories I expected.
- Updated the remote URI of a repository, saw queries / index update appropriately.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4705
Differential Revision: https://secure.phabricator.com/D15005
Summary:
Ref T4245.
- Rename "Clone/Checkout As" to "Short Name" in the UI.
- Allow any repository to have a short name, not just hosted repositories.
Test Plan:
- Ran migration.
- Reviewed old transactions, saw they looked good.
- Edited an existing repository's short name.
- Gave an imported repository a new short name.
- Removed a repository's short name.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D14989
Summary:
Fixes T7938.
- Primarily, users can currently shoot themselves in the foot by putting `../../etc/passwd` and other similar nonsense in these fields (this is not dangerous, but also does not work). Require sensible names.
- Enforce uniqueness so these names can be used in URIs and as identifiers in the future.
- (This doesn't start actually using them for anything fancy yet.)
Test Plan:
- Gave several repositories clone names: a valid name, two duplicate names, an invalid, name, some with no names.
- Ran migrations.
- Got clean conversion for valid names, appropriate errors for invalid/duplicate names.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7938
Differential Revision: https://secure.phabricator.com/D14986
Summary:
Ref T10010. Ref T5819. General alignment of the stars:
- There were some hacks in Conduit around stripping `fa-...` off icons when reading and writing that I wanted to get rid of.
- We probably have room for a subtitle in the new heavy nav, and using the icon name is a good starting point (and maybe good enough on its own?)
- The project list was real bad looking with redundant tag/names, now it is very slightly less bad looking with non-redundant types?
- Some installs will want to call Milestones something else, and this gets us a big part of the way there.
- This may slightly help to reinforce "tag" vs "policy" vs "group" stuff?
---
I'm letting installs have enough rope to shoot themselves in the foot (e.g., define 100 icons). It isn't the end of the world if they reuse icons, and is clearly their fault.
I think the cases where 100 icons will break down are:
- Icon selector dialog may get very unwieldy.
- Query UI will be pretty iffy/huge with 100 icons.
We could improve these fairly easily if an install comes up with a reasonable use case for having 100 icons.
---
The UI on the icon itself in the list views is a little iffy -- mostly, it's too saturated/bold.
I'd ideally like to try either:
- rendering a "shade" version (i.e. lighter, less-saturated color); or
- rendering a "shade" tag with just the icon in it.
However, there didn't seem to be a way to do the first one right now (`fa-example sh-blue` doesn't work) and the second one had weird margins/padding, so I left it like this for now. I figure we can clean it up once we build the thick nav, since that will probably also want an identical element.
(I don't want to render a full tag with the icon + name since I think that's confusing -- it looks like a project/object tag, but is not.)
Test Plan:
{F1049905}
{F1049906}
Reviewers: chad
Reviewed By: chad
Subscribers: 20after4, Luke081515.2
Maniphest Tasks: T5819, T10010
Differential Revision: https://secure.phabricator.com/D14918
Summary:
Ref T10010. This will allow us to find superprojects with `withMemberPHIDs(...)` queries.
- Copy all the current real member edges to materialized member edges.
- Redirect all reads to look at materialized members.
- This table is already kept in sync by earlier work with indexing.
Basically, flow is:
- Writes (joining, leaving, adding/removing members) write to the real member edge type.
- After a project's members change, they're copied to the materialized member edge type for that project and all of its superprojects.
- Reads look at materialized members, so "Parent" sees the members of "Child" and "Grandchild" as its own members, but we still have the "real members" edge type to keep track of "natural" or "direct" members.
Test Plan:
- Ran migration.
- Ran unit tests.
- Saw the same projects as projects I was a member of.
- Added some `var_dump()` stuff to verify the Owners changed.
- Used `grep` to look for other readers of this edge type.
- Made some project updates.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D14893
Summary:
Ref T9994.
- Allow errors to be dismissed.
- Tailor messaging for closed/abandoned revisions.
- Reduce scare messaging on land dialog, since it's not really that scary anymore.
Test Plan:
- Dismissed errors.
- Hit new warnings.
- Wasn't as scared when landing.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9994
Differential Revision: https://secure.phabricator.com/D14886
Summary:
Ref T10010. This adds infrastructure for querying projects by type, depth, parent and ancestor.
I needed to revise the "extended policy check" cycle detection rules. When, e.g., querying a grandchild, they incorrectly detected a cycle because both the child and grandchild needed to check the policy of the grandparent.
Instead, simplify it to just do a basic runaway calldepth check. There are many other safety mechanisms to make it so this can't ever occur.
(Cycle detection does have existing test coverage, and those tests still pass, it just takes a little longer to detect the cycle internally.)
There is still no way to create subprojects in the UI.
Test Plan: Added and executed unit tests.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D14862
Summary:
Ref T10010. This implements technical groundwork for subprojects. Specifically, it implements policy rules like Phriction:
- to see a project, you must be able to see all of its parents (and the project itself).
- you can edit a project if you can edit any of its parents (or the project itself).
To facilitiate this, we load all project ancestors when querying projects so we can do the view/edit checks.
This does NOT yet implement:
- proper membership rules for these projects (up next);
- any kind of UI to let users create subprojects.
Test Plan:
- Added unit tests.
- Executed unit tests.
- Browsed Projects (no change in behavior is expected).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D14861
Summary:
Ref T9979. This uses ngrams (specifically, trigrams) to build a reasonably efficient index for substring matching. Specifically, for a package like "Example", with ID 123, we store rows like this:
```
< ex, 123>
<exa, 123>
<xam, 123>
<amp, 123>
<mpl, 123>
<ple, 123>
<le , 123>
```
When the user searches for `exam`, we join this table for packages with tokens `exa` and `xam`. MySQL can do this a lot more efficiently than it can process a `LIKE "%exam%"` query against a huge table.
When the user searches for a one-letter or two-letter string, we only search the beginnings of words. This is probably what they want, the only thing we can do quickly, and a reasonable/expected behavior for typeaheads.
Test Plan:
- Ran storage upgrades and search indexer.
- Searched for stuff with "name contains".
- Used typehaead and got sensible results.
- Searched for `aabbccddeeffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz` and saw only 16 joins.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9979
Differential Revision: https://secure.phabricator.com/D14846
Summary:
Fixes T9890. This allows IndexExtensions to emit an object version.
Before we build indexes, we check if the indexed version is the same as the current version. If it is, we just don't call that extension.
T9890 has a case where this is useful: a script went crazy and posted thousands of comments to a single task.
Without versioning, that results in the same comments being indexed over and over again. With versioning, most of the queue could just exit without doing any work.
Test Plan:
- Added a `sleep(1)` to the actual indexing, used `bin/search index --background` to queue up a lot of tasks, ran them with `bin/phd debug task`, saw them complete very quickly with only one actual index operation performed.
- Used `bin/search index --trace` and `bin/search index --trace --background` to observe the behavior of queries against the index version store, which looked sensible.
- Made comments/transactions, saw versions update.
- Used `bin/remove destroy`, verified index versions were purged.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9890
Differential Revision: https://secure.phabricator.com/D14845
Summary: Ref T9967
Test Plan:
Ran migrations.
Verified database populated properly with PHIDs (SELECT * FROM auth_sshkey;).
Ran auth.querypublickeys conduit method to see phids show up
Ran bin/remove destroy <phid>.
Viewed the test key was gone.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Maniphest Tasks: T9967
Differential Revision: https://secure.phabricator.com/D14823
Summary:
Ref T10010. This does some cleanups on the schema:
- `viewPolicy`, `editPolicy` and `joinPolicy` were nullable, but should never be `null`. Set them to defaults if they're null, then make the column non-nullable.
- Rename `phrictionSlug` to `primarySlug` and stop adding and removing trailing slashes from it.
- Add new columns to support milestones and non-milestone subprojects.
- Drop very old subprojectPHIDs column. This hasn't done anything in the UI for years and years, and isn't particularly realistic to migrate forward.
The new columns aren't reachable from the UI.
Test Plan:
- Applied patches.
- Grepped for `phrictionSlug`.
- Grepped for `subprojectPHIDs`.
- Created tasks.
- Edited tasks.
- Verified existing tasks still had primary slugs.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D14825
Summary:
Fixes T9995. I think letting users customize slugs is not a hugely compelling as a product feature, and this fixes the issue with slugs that have "/" characters in them and makes the move to EditEngine easier since I don't have to deal with the weird JS thing.
Instead, just generate slugs automatically. No more JS, no more separate field, things automatically update if you rename a blog, and now that URIs have IDs in them the old URI will still work after a rename.
Test Plan:
- Applied migration.
- Created new posts.
- Edited existing posts.
- Visited various posts.
- Created a post with a bunch of "/" in the title, things still worked fine.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9995
Differential Revision: https://secure.phabricator.com/D14792
Summary: Ref T9952. See discussion there. This change is primarily aimed at letting me build a typeahead of branches in a repository so that we can land to arbitrary branches a few diffs from now.
Test Plan:
- Ran migrations.
- Verified database populated properly with PHIDs (`SELECT * FROM repository_refcursor;`).
- Ran `bin/repository update`.
- Viewed a Git repository in Diffusion.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9952
Differential Revision: https://secure.phabricator.com/D14731
Summary:
Ref T9908. Simplify some of the policies here:
- If you can edit an application (currently, always "Administrators"), you can view and edit all of its forms.
- You must be able to edit an application to create new forms.
- Improve some error messages.
- Get about halfway through letting users reorder forms in the "Create" menu if they want to sort by something weird since it'll need schema changes and I can do them all in one go here.
Test Plan:
- Tried to create and edit forms as an unprivileged user.
- Created and edited forms as an administrator.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9908
Differential Revision: https://secure.phabricator.com/D14700
Summary:
Ref T9132. Fixes T5031. This approximately implements the plan described in T5031#67988:
When we recieve a preview request, don't write a draft if the form is from a version of the object before the last update the viewer made.
This should fix the race-related (?) zombie draft comments that sometimes show up.
I just added a new object for this stuff to make it easier to do stacked actions (or whatever we end up with) a little later, since I needed to do some schema adjustments anyway.
Test Plan:
- Typed some text.
- Reloaded page.
- Draft stayed there.
- Tried real hard to get it to ghost by submitting stuff in multiple windows and typing a lot and couldn't, although I didn't bother specifically narrowing down the race condition.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5031, T9132
Differential Revision: https://secure.phabricator.com/D14640
Summary: Will use these more in the upcoming unbeta design of PhameBlog, likely. Also curious how this works.
Test Plan: Add an image to a blog, remove an image from a blog.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14587
Summary: Removes "delete" and uses "archive/activate" instead for Phame Blogs. Ref T9756
Test Plan: Archive a blog, see in search, activate blog, see in other search.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: joshuaspence, Korvin
Maniphest Tasks: T9756
Differential Revision: https://secure.phabricator.com/D14465
Summary:
Ref T9787. To fix this, I want to change how file PHIDs are extracted slightly: specifically, I'm going to extract them later in the editing process.
Before doing this, clean up a couple of bad implementations:
- Owners extracts its description as a file PHID. This is an error.
- Extract the description as a remarkup block instead.
- Add an edge table so stuff like file attachment works properly.
- Differential has a no-op extract method. This is presumably just a copy/paste issue from long ago.
Test Plan:
- Edited a revision in Differential.
- Dropped a file into the description of an Owners package.
- Before change: this did not attach the file.
- After change: the file now attaches properly and shows up as "Attached" in the file details.
Reviewers: chad, joshuaspence
Reviewed By: joshuaspence
Subscribers: joshuaspence
Maniphest Tasks: T9787
Differential Revision: https://secure.phabricator.com/D14493
Summary: Fixes T9757.
Test Plan: Created a Herald rule and then subscribed to it with a different account.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Maniphest Tasks: T9757
Differential Revision: https://secure.phabricator.com/D14468
Summary: Rename the XHPAST database from `{$NAMESPACE}_xpastview` to `{$NAMESPACE}_xhpast`.
Test Plan: Ran `./bin/storage --namespace test upgrade --no-quickstart`.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14442
Summary: Ref T7053. Remove the `envHash` and `envInfo` fields, which are no longer used now that the daemons restart automagically. Depends on D14458.
Test Plan: Saw no more setup issues.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: tycho.tatitscheff, epriestley
Maniphest Tasks: T7053
Differential Revision: https://secure.phabricator.com/D14446
Summary:
Ref T9132. This diff doesn't do anything interesting, it just lays the groundwork for more interesting future diffs.
Broadly, the idea here is to let you create multiple views of each edit form. For example, we might create several different "Create Task" forms, like:
- "New Bug Report"
- "New Feature Request"
These would be views of the "Create Task" form, but with various adjustments:
- A form might have additional instructions ("how to file a good bug report").
- A form might have prefilled values for some fields (like particular projects, subscribers, or policies).
- A form might have some fields locked (so they can not be edited) or hidden.
- A form might have a different field order.
- A form might have a limited visibility policy, so only some users can access it.
This diff adds a new storage object (`EditEngineConfiguration`) to keep track of all those customizations and represent "a form which has been configured to look and work a certain way".
This doesn't let these configurations do anything useful/interesting, and you can't access them directly yet, it's just all the boring plumbing to enable more interesting behavior in the future.
Test Plan:
ApplicationEditor forms now let you manage available forms and edit the current form:
{F959025}
There's a new (bare bones) list of all available engines:
{F959030}
And if you jump into an engine, you can see all the forms for it:
{F959038}
The actual form configurations have standard detail/edit pages. The edit pages are themselves driven by ApplicationEditor, of course, so you can edit the form for editing forms.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14453
Summary: Adds commenting to Phame Posts, also testing a new "document comment style". Unsure about it but Phame is a prototype so good place to explore.
Test Plan: Leave some comments, see some comments, test show/hide.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9746
Differential Revision: https://secure.phabricator.com/D14451
Summary:
This diff adds a new mode argument to the Diffusion Conduit API with two options:
- "overwrite": the default, maintains the current behavior of deleting all coverage
in the specified branch before uploading the new coverage
- "update": does not delete old coverage, but will overwrite previous
coverage information if it's for the same file and commit
`DiffusionRequest::loadCoverage` already loads a file's coverage from the
latest available commit, so uploading coverage for different files in different
commits with "update" will result in seeing the latest uploaded coverage in
Diffusion.
Test Plan: manual local verification
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14428
Summary: Drops Join Policy, uses Edit Policy where needed. Allows anyone with Blog Edit permissions to post and edit any post on that blog. Fixes T5371
Test Plan: Draft Post as chad, see post, log in with notchad, edit that post and publish it.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T5371
Differential Revision: https://secure.phabricator.com/D14444
Summary: Currently, a bunch of developers are using #xhpast for writing custom linter rules. As such, we end up with a fair few `XHPASTSyntaxErrorException` in our PHP error logs. I think that throwing an exception is not quite correct in this case because it is somewhat expected that invalid PHP may be entered. Instead, catch the exception and show the user a helpful message.
Test Plan: This doesn't quite work yet... the stream and tree views render as blank but the exceptions still propogate to the error logs. Mostly, I'm not sure how the exception should be rendered for display.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14028
Summary: Add some mailkeys, allow feed stories to be published.
Test Plan: New Blog, Edit Blog
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14434
Summary: Allows feed stories and mail for new Phame Posts.
Test Plan: Write Post, Get Mail
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14426
Summary:
Fix T9662.
Record who initiated the build, and allow this information as a parameter.
In this implementation, a 're-run' keeps the original initiator, which we maybe not desired?
Test Plan:
Make a HTTP step with initiator.phid, trigger manually, via HM, via ./bin/harbormaster build.
Look at requests made.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T9662
Differential Revision: https://secure.phabricator.com/D14380
Summary: We haven't seen any issues here, remove the table and schema spec.
Test Plan: Not yet tested.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14067
Summary:
Ref T9614. Currently, a lot of Build Plan behavior is covered by a global "can manage" policy.
One install in particular is experiencing difficulty with warring factions within engineering aborting one another's builds.
As a first step to remedy this, and also generally make Harbormaster more flexible and bring it in line with other applications in terms of policy power:
- Give Build Plans normal view/edit policies.
- Require "Can Edit" to run a plan manually.
Having "Can View" on plans may be a little weird in some cases (the status of a Buildable might be bad because of a build you can't see) but we can cross that bridge when we come to it.
Next change here will require "Can Edit" to abort a build. This will reasonably allow installs to reserve pause/abort for administrators/adults. (I might let anyone restart a plan, though?)
Test Plan:
- Created a new build plan.
- Verified defaults were inherited from application defaults (swapped them around, too).
- Saved build plan.
- Edited policies.
- Verified autoplans get the right policies.
- Verified old plans got migrated properly.
- Tried to run a plan I couldn't edit (denied).
- Ran a plan from CLI with `bin/harbormaster`.
- Tried to create a plan with an unprivileged user.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9614
Differential Revision: https://secure.phabricator.com/D14321
Summary:
It's hard for us to predict how long patches and migrations will take in the general case since it varies a lot from install to install, but we can give installs some kind of rough heads up about longer patches. I'm planning to just put a sort of hint for things in the changelog, something like this:
{F905579}
To make this easier, start storing how long stuff took. I'll write a little script to dump this into a table for the changelog.
Test Plan:
Ran `bin/storage status`:
{F905580}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14320
Summary:
Ref T182. This doesn't do anything interesting yet and is mostly scaffolding, but here's roughly the workflow. From previous revision, you can configure "Repository Automation" for a repository:
{F875741}
If it's configured, a new "Land Revision" button shows up:
{F875743}
Once you click it you get a big warning dialog that it won't work, and then this shows up at the top of the revision (completely temporary/placeholder UI, some day a nice progress bar or whatever):
{F875747}
If you're lucky, the operation eventually sort of works:
{F875750}
It only runs `git show` right now, doesn't actually do any writes or anything.
Test Plan:
- Clicked "Land Revision".
- Watched `phd debug task`.
- Saw it log `git show` to output.
- Verified operation success in UI (by fiddling URL, no way to get there normally yet).
Reviewers: chad
Reviewed By: chad
Subscribers: revi
Maniphest Tasks: T182
Differential Revision: https://secure.phabricator.com/D14266
Summary:
Ref T9551. We currently use the same logic for generating project hashtags and Phriction slugs, but should be a little more conservative with project hashtags.
Stop them from generating with stuff that won't parse in a "Reviewers:" field or generally in commments (commas, colons, etc).
Test Plan:
Created a bunch of projects with nonsense in them and saw them generate pretty reasonable hashtags.
{F873456}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9551
Differential Revision: https://secure.phabricator.com/D14261
Summary:
Ref T9519. When acquiring leases on resources:
- Only consider resources created by authorized blueprints.
- Only consider authorized blueprints when creating new resources.
- Fail with a tailored error if no blueprints are allowed.
- Fail with a tailored error if missing authorizations are causing acquisition failure.
One somewhat-substantial issue with this is that it's pretty hard to figure out from the Harbormaster side. Specifically, the Build step UI does not show field value anywhere, so the presence of unapproved blueprints is not communicated. This is much more clear in Drydock. I'll plan to address this in future changes to Harbormaster, since there are other related/similar issues anyway.
Test Plan: {F872527}
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T9519
Differential Revision: https://secure.phabricator.com/D14254
Summary:
Ref T9519. This is like 80% of the way there and doesn't fully work yet, but roughly shows the shape of things to come. Here's how it works:
First, there's a new custom field type for blueprints which works like a normal typeahead but has some extra logic. It's implemented this way to make it easy to add to Blueprints in Drydock and Build Plans in Harbormaster. Here, I've added a "Use Blueprints" field to the "WorkingCopy" blueprint, so you can control which hosts the working copies are permitted to allocate on:
{F869865}
This control has a bit of custom rendering logic. Instead of rendering a normal list of PHIDs, it renders an annotated list with icons:
{F869866}
These icons show whether the blueprint on the other size of the authorization has approved this object. Once you have a green checkmark, you're good to go.
On the blueprint side, things look like this:
{F869867}
This table shows all the objects which have asked for access to this blueprint. In this case it's showing that one object is approved to use the blueprint since I already approved it, but by default new requests come in here as "Authorization Requested" and someone has to go approve them.
You approve them from within the authorization detail screen:
{F869868}
You can use the "Approve" or "Decline" buttons to allow or prevent use of the blueprint.
This doesn't actually do anything yet -- objects don't need to be authorized in order to use blueprints quite yet. That will come in the next diff, I just wanted to get the UI in reasonable shape first.
The authorization also has a second piece of state, which is whether the request from the object is active or inactive. We use this to keep track of the authorization if the blueprint is (maybe temporarily) deleted.
For example, you might have a Build Plan that uses Blueprints A and B. For a couple days, you only want to use A, so you remove B from the "Use Blueprints: ..." field. Later, you can add B back and it will connect to its old authorization again, so you don't need to go re-approve things (and if you're declined, you stay declined instead of being able to request authorization over and over again). This should make working with authorizations a little easier and less labor intensive.
Stuff not in this diff:
- Actually preventing any allocations (next diff).
- Probably should have transactions for approve/decline, at least, at some point, so there's a log of who did approvals and when.
- Maybe should have a more clear/loud error state when no blueprints are approved?
- Should probably restrict the typeahead to specific blueprint types.
Test Plan:
- Added the field.
- Typed some stuff into it.
- Saw the UI update properly.
- Approved an authorization.
- Declined an authorization.
- Saw active authorizations on a blueprint page.
- Didn't see any inactive authroizations there.
- Clicked "View All Authorizations", saw all authorizations.
Reviewers: chad, hach-que
Reviewed By: chad
Maniphest Tasks: T9519
Differential Revision: https://secure.phabricator.com/D14251
Summary:
Fixes T9500. All the code is fine in D13836, but the value of the constant got updated (from "open" to "active") and the migration still used the old value.
Correct any affected dashboards to use the proper constant.
This only affected old dashboards: newly created ones use the right constant.
Test Plan: Ran migration, verified that all active dashboards appeared on "Active Dashboards".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9500
Differential Revision: https://secure.phabricator.com/D14223
Summary: Ref T9352. See D13635. Build targets can have variables already, but let builds have them too. This mostly enables future use cases (sub-builds, more sophisticated build triggers).
Test Plan: With a custom Herald rule + action like the one in T9352, updated a revision and saw it generate multiple builds with varying parameters.
Reviewers: chad, hach-que
Reviewed By: hach-que
Maniphest Tasks: T9352
Differential Revision: https://secure.phabricator.com/D14222
Summary:
Ref T9252. Long ago you sometimes manually created resources, so they had human-enterable names. However, users never make resources manually any more, so this field isn't really useful any more.
In particular, it means we write a lot of untranslatable strings like "Working Copy" to the database in the default locale. Instead, do the call at runtime so resource names are translatable.
Also clean up a few minor things I hit while kicking the tires here.
It's possible we might eventually want to introduce a human-choosable label so you can rename your favorite resources and this would just be a default name. I don't really have much of a use case for that yet, though, and I'm not sure there will ever be one.
Test Plan:
- Restarted a Harbormaster build, got a clean build.
- Released all leases/resources, restarted build, got a clean build with proper resource names.
Reviewers: hach-que, chad
Reviewed By: hach-que, chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14213
Summary:
Ref T9252. Several general changes here:
- Moves logs to use PHIDs instead of IDs. This generally improves flexibility (for example, it's a lot easier to render handles).
- Adds `blueprintPHID` to logs. Although you can usually figure this out from the leasePHID or resourcePHID, it lets us query relevant logs on Blueprint views.
- Instead of making logs a top-level object, make them strictly a sub-object of Blueprints, Resources and Leases. So you go Drydock > Lease > Logs, etc., to get to logs.
- I might restore the "everything" view eventually, but it doesn't interact well with policies and I'm not sure it's very useful. A policy-violating `bin/drydock log` might be cleaner.
- Policy-wise, we always show you that logs exist, we just don't show you log content if it's about something you can't see. This is similar to seeing restricted handles in other applications.
- Instead of just having a message, give logs "type" + "data". This will let logs be more structured and translatable. This is similar to recent changes to Herald which seem to have worked well.
Test Plan:
Added some placeholder log writes, viewed those logs in the UI.
{F855199}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14196
Summary: I haven't regenerated this for a while and it makes instances and unit tests a little faster.
Test Plan:
- Manually reviewed changes for sanity.
- Ran `arc unit --everything`.
- Observed runtime drop from ~15-16 seconds to ~12-13 seconds.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14192
Summary:
Fixes T6569. This implements an expiry mechanism for Drydock resources which parallels the mechanism for leases.
A few things are missing that we'll probably need in the future:
- An "EXPIRES" command to update the expiration time. This would let resources be permanent while leased, then expire after, say, 24 hours without any leases.
- A callback like `shouldActuallyExpireRightNow()` for resources and leases that lets them decide not to expire at the last second.
- A callback like `didAcquireLease()` for resource blueprints, to parallel `didReleaseLease()`, letting them clear or extend their timer.
However, this stuff would mostly just let us tune behaviors, not really open up new capabilities.
Test Plan: Changed host resources to expire after 60 seconds, leased one, saw it vanish 60 seconds later.
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T6569
Differential Revision: https://secure.phabricator.com/D14176
Summary: Ref T9252. If you have a blueprint and you do not like that blueprint very much, you can disable it.
Test Plan: Disabled / enabled some blueprints.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14156
Summary:
Ref T9252. Drydock currently uses integer statuses, but there's no reason for this (they don't need to be ordered) and it makes debugging them, working with them, future APIs, etc., more cumbersome.
Switch to string instead.
Also rename `STATUS_OPEN` to `STATUS_ACTIVE` and `STATUS_CLOSED` to `STATUS_RELEASED` for consistency. This makes resources and leases have more similar states, and gives resource states more accurate names.
Test Plan: Browsed web UI, grepped for changed constants, applied patch, inspected database.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14153
Summary:
Ref T9252. Leases currently have a `resourceID`, but this is a bit nonstandard and generally less flexible than giving them a `resourcePHID`.
In particular, a `resourcePHID` is easier to use when rendering interfaces, since you can get handles out of a PHID.
Add a PHID column, copy over all the PHIDs that correspond to existing IDs, then drop the ID column.
Test Plan:
- Browsed web UIs.
- Inspected database during/after migration.
- Grepped for `resourceID`.
- Allocated a new lease with `bin/drydock lease`.
Reviewers: chad, hach-que
Reviewed By: hach-que
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14151
Summary:
Ref T9464. If an ancient transaction doesn't have array values for whatever reason, we fail here.
Instead, just recover as gracefully as we can. We may get the transaction "wrong" in some sense, but this only impacts what is rendered in the transaction log.
Test Plan: This is nearly a year old and there's no real way to test it.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9464
Differential Revision: https://secure.phabricator.com/D14149
Summary:
Ref T9252. This simplifies some Drydock code.
Most of this code relates to the old notion of Drydock being able to enumerate all the tasks it needs to complete in order to acquire a lease. The code has stepped back from this, since it's unnecessary, the queue is more powerful than it used to be, and it would be a lot of work to keep track of.
The ~only thing that should ever wait for leases in modern code is `bin/drydock lease`, and it's fine for it to just sit there sleeping, so this just does that.
This reduces the granularity of logging, but I'll address that separately in future logging-focused changes.
Test Plan: Used `bin/drydock lease` to acquire a lease, saw it acquire cleanly.
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14147
Summary:
Ref T9252. Broadly, Drydock currently races on releasing objects from the "active" state. To reproduce this:
- Scatter some sleep()s pretty much anywhere in the release code.
- Release several times from web UI or CLI in quick succession.
Resources or leases will execute some release code twice or otherwise do inconsistent things.
(I didn't chase down a detailed reproduction scenario for this since inspection of the code makes it clear that there are no meaningful locks or mechanisms preventing this.)
Instead, add a Harbormaster-style command queue to resources and leases. When something wants to do a release, it adds a command to the queue and schedules a worker. The workers acquire a lock, then try to consume commands from the queue.
This guarantees that only one process is responsible for writes to active resource/leases.
This is the last major step to giving resources and leases a single writer during all states:
- Resource, Unsaved: AllocatorWorker
- Resource, Pending: ResourceWorker (Possible rename to "Allocated?")
- Resource, Open: This diff, ResourceUpdateWorker. (Likely rename to "Active").
- Resource, Closed/Broken: Future destruction worker. (Likely rename to "Released" / "Broken"; maybe remove "Broken").
- Resource, Destroyed: No writes.
- Lease, Unsaved: Whatever wants the lease.
- Lease, Pending: AllocatorWorker
- Lease, Acquired: LeaseWorker
- Lease, Active: This diff, LeaseUpdateWorker.
- Lease, Released/Broken: Future destruction worker (Maybe remove "Broken"?)
- Lease, Expired: No writes. (Likely rename to "Destroyed").
In most phases, we can already guarantee that there is a single writer without doing any extra work. This is more complicated in the "Active" case because the release buttons on the web UI, the release tools on the CLI, the lease requestor itself, the garbage collector, and any other release process cleaning up related objects may try to effect a release. All of these could race one another (and, in many cases, race other processes from other phases because all of these get to act immediately) as this code is currently written. Using a queue here lets us make sure there's only a single writer in this phase.
One thing which is notable is that whatever acquires a lease **can not write to it**! It is never the writer once it queues the lease for activation. It can not write to any resources, either. And, likewise, Blueprints can not write to resources while acquiring or releasing leases.
We may need to provide a mechinism so that blueprints and/or resource/lease holders get to attach some storage to resources/leases for bookkeeping. For example, a blueprint might need to keep some kind of cache on a resource to help it manage state. But I think we can cross that bridge when we come to it, and nothing else would need to write to this storage so it's technically straightforward to introduce such a mechanism if we need one.
Test Plan:
- Viewed buttons in web UI, checked enabled/disabled states.
- Clicked the buttons.
- Saw commands show up in the command queue.
- Saw some daemon stuff get scheduled.
- Ran CLI tools, saw commands get consumed and resources/leases release.
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14143
Summary:
See discussion in D10304. There's a lot of context there, but the general idea is:
- Blueprints should manage locks in a granular way during the actual allocation/acquisition phase.
- Optimistic "slot locks" might a pretty good primitive to make that easy to implement and reason about in most cases.
The way these locks work is that you just pick some name for the lock (like the PHID of a resource) and say that it needs to be acquired for the allocation/acquisition to work:
```
...
->needSlotLock("mylock(PHID-XYZQ-...)")
...
```
When you fire off the acquisition or allocation, it fails unless it could acquire the slot with that name. This is really simple (no explicit lock management) and a pretty good fit for most of the locking that blueprints and leases need to do.
If you need to do limit-based locks (e.g., maximum of 3 locks) you could acquire a lock like this:
```
mylock(whatever).slot(2)
```
Blueprints generally only contend with themselves, so it's normally OK for them to pick whatever strategy works best for them in naming locks.
This may not work as well if you have a huge number of slots (e.g., 100TB you want to give out in 1MB chunks), or other complex needs for locks (like you have to synchronize access to some external resource), but slot locks don't need to be the only mechanism that blueprints use. If they run into a problem that slot locks aren't a good fit for, they can use something else instead. For now, slot locks seem like a good fit for the problems we currently face and most of the problems I anticipate facing.
(The release workflows have other race issues which I'm not addressing here. They work fine if nothing races, but aren't race-safe.)
Test Plan:
To create a race where the same binding is allocated as a resource twice:
- Add `sleep(10)` near the beginning of `allocateResource()`, after the free bindings are loaded but before resources are allocated.
- (Comment out slot lock acquisition if you have this patch.)
- Run `bin/drydock lease ...` in two windows, within 10 seconds of one another.
This will reliably double-allocate the binding because both blueprints see a view of the world where the binding is free.
To verify the lock works, un-comment it (or apply this patch) and run the same test again. Now, the lock fails in one process and only one resource is allocated.
Reviewers: hach-que, chad
Reviewed By: hach-que, chad
Differential Revision: https://secure.phabricator.com/D14118
Summary: Fixes T9351. This is straightforward since this application is now relatively modern and doesn't have any bizarre craziness.
Test Plan:
{F787981}
{F787982}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9351
Differential Revision: https://secure.phabricator.com/D14093
Summary:
One of the migrations in rPa335004a91 (`20150730.herald.5.sql`) incorrectly swapped "add" and "add blocking" Differential Herald rules.
Swap any rules last modified before this patch was applied back. This is the best we can do without possibly overwriting more recent, intentional data. I'll issue some guidance on this in the changelog.
Test Plan:
- Made a rule, ran patch, no change.
- Changed rule modified time to a few months ago, ran patch, saw swap from non-blocking to blocking.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14061
Summary: Adds an additional field for questions, an answer wiki, should should usually be community editable.
Test Plan: New question, edit question, no wiki, lots of wiki.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14003
Summary: Until we have a proper close as duplicate workflow for Ponder, remove the option with something more sensible.
Test Plan: Closed a question as invalid, saw it closed and in feed.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14007
Summary:
Ref T8783. Sort out some relationships and fields:
- Make Items 1:1 with Queues: each item is always in exactly one queue. Minor discussion on T8783. I think this is easier to understand and reason about (and implement!) and can't come up with any real cases where it isn't powerful enough.
- Remove "QueueItem", which allowed items to be in multiple queues at once.
- Remove "dateNuanced", which is equivalent to "dateCreated" in all cases.
Then add really basic routing:
- Add "Default Queue" for Sources. New items from the source route into that queue.
- (Some day there will be routing rules, but for now the rule is "always route into the default queue".)
- Show queue on items.
- Show more / more useful edit history and transactions in several UIs.
Test Plan:
{F749445}
{F749446}
{F749447}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8783
Differential Revision: https://secure.phabricator.com/D13988
Summary: Fixes T8428. Adds status to packages, allows setting and application search. I presume though these need checked elsewhere?
Test Plan: New package, edit package, archive package, run search queries.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T8428
Differential Revision: https://secure.phabricator.com/D13925
Summary:
Ref T8659. In the general case, this eventually allows build processes to do things like:
- Upload build results (like a ".app" or ".exe" or other binary).
- Pass complex results between build steps (e.g., build step A does something hard and build step B uses it to do something else).
Today, we're a long way away from having the infrastructure for that. However, it is useful to let third party build processes (like Jenkins) upload URIs that link back to the external build results.
This adds `harbormaster.createartifact` so they can do that. The only useful thing to do with this method today is have your Jenkins build do this:
params = array(
"uri": "https://jenkins.mycompany.com/build/23923/details/",
"name": "View Build Results in Jenkins",
"ui.external": true,
);
harbormaster.createartifact(target, 'uri', params);
Then (after the next diff) we'll show a link in Differential and a prominent link in Harbormaster. I didn't actually do the UI stuff in this diff since it's already pretty big.
This change moves a lot of code around, too:
- Adds PHIDs to artifacts.
- It modularizes build artifact types (currently "file", "host" and "URI").
- It formalizes build artifact parameters and construction:
- This lets me generate usable documentation about how to create artifacts.
- This prevents users from doing dangerous or policy-violating things.
- It does some other general modernization.
Test Plan:
{F715633}
{F715634}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8659
Differential Revision: https://secure.phabricator.com/D13900
Summary: Ref T9173, adds basic hide support for answers. Answer authors and Moderators can hide answers, unhide them.
Test Plan: Hide answer, log into other account, see hidden message. Mark as visible, see answer again.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9173
Differential Revision: https://secure.phabricator.com/D13894
Summary: Ref T6920, This removes the PonderVotableInterface from PonderQuestion and assocaited code. Also... never used?
Test Plan: Visit Ponder, See List, New Question, Add Answer.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T6920
Differential Revision: https://secure.phabricator.com/D13833
Summary: This allows installs to essentially set a "moderator" for Ponder, who can clean up answers. Fixes T9098
Test Plan: Edit an answer I don't own.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9098
Differential Revision: https://secure.phabricator.com/D13818
Summary: This fails to apply on my second sandbox with incorrect DOUBLE value. Reran SQL, works as expected.
Test Plan: Rerun new SQL on ponder_question table
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D13830
Summary: Ref T9096. This is a first cut at adding additional statuses, happy to add or subtract as needed... maybe even configurable? Also, the dialog doesn't seem to fire, I'll keep debugging.
Test Plan: Close and Reopen many questions. Test applicationSearch params by seeing resolved questions, all questions.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9096
Differential Revision: https://secure.phabricator.com/D13826
Summary: Ref T9076, adds basic plumbing for setting the state of a Paste.
Test Plan: Archive Paste, Activate Paste, New Paste
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9076
Differential Revision: https://secure.phabricator.com/D13801
Summary: Ref T8493, Ref T3578. Adds spaces support to ponder.
Test Plan: Ask a question in a new space, see new question.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T3578, T8493
Differential Revision: https://secure.phabricator.com/D13792
Summary: Ref T3578, adds ability to set a default edit and view policy for questions. Not sure what to set viewPolicy to ?
Test Plan: Test an old question, edit policy still on myself. Test a new question, see new default.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T3578
Differential Revision: https://secure.phabricator.com/D13791
Summary: Ref T3846. Adds mailkey generation and migration.
Test Plan: Ran the migration, see keys in mysql.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T3846
Differential Revision: https://secure.phabricator.com/D13785
Summary: Ref T8726. Convert these to be modular.
Test Plan:
- Created rules using these actions.
- Upgraded them.
- Verified they still work.
{F659266}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: joshuaspence, epriestley
Maniphest Tasks: T8726
Differential Revision: https://secure.phabricator.com/D13705
Summary: Ref T8726. No surprises.
Test Plan:
Created rules using both action variants, applied upgrade, saw rules still work correctly.
{F658842}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: joshuaspence, epriestley
Maniphest Tasks: T8726
Differential Revision: https://secure.phabricator.com/D13701
Summary: Ref T8726. Converts these actions to be modular. No real surprises in this change.
Test Plan:
{F658709}
- Wrote some rules.
- Migrated them forward.
- Used a bunch of these rules.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: joshuaspence, epriestley
Maniphest Tasks: T8726
Differential Revision: https://secure.phabricator.com/D13699
Summary:
Fixes T8958. I renamed this class and table (in D13644), but the migration `20150606.mlist.1.php` needs to load records from the table before the table rename applies.
Put the table back and accept a tiny bit of cruft here to fix this problem. We can no-op the migration after a while.
I'll cherry-pick this to `stable`.
Test Plan: Applied migration. Created Herald rules. Reviewed existing Herald rules.
Reviewers: btrahan
Subscribers: epriestley
Maniphest Tasks: T8958
Differential Revision: https://secure.phabricator.com/D13736
Summary: Drops the sql column.
Test Plan: View logged in and logged out badges, edited some too.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D13715
Summary: Still doesn't mail yet, but the settings now show up.
Test Plan: View email settings, see Badges options.
Reviewers: eadler, epriestley
Reviewed By: eadler, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D13712
Summary: DRAFT - throw together Phurl skeleton.
Test Plan: The idea is that `some/long/url` will become `install/Udet4d` and can be viewed and edited at `install/Udet4d/view` and `install/Udet4d/edit`, respectively?
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: joshuaspence, chad, epriestley, Korvin
Maniphest Tasks: T6049
Differential Revision: https://secure.phabricator.com/D13681
Summary: Fixes T8949. Adds the ability to render honors on those who have fought and received badges of distinction and honor.
Test Plan: Write 'asdf'. See 'asdf'.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T8949
Differential Revision: https://secure.phabricator.com/D13704
Summary:
Ref T8726. I want to modularize actions like fields, but the base class should be "HeraldAction".
Eventually, "HeraldCondition" should probably be "HeraldFieldRecord", and then both Action and Condition should just be rolled into Rule, probably, but that can wait and doesn't block anything.
Test Plan: Ran migration, poked around UI, used `git grep`.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8726
Differential Revision: https://secure.phabricator.com/D13644
Summary: Allows countdowns to have a description.
Test Plan: Use description, edit description. Check timeline, etc.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D13691
Summary:
Basic plumbing for Badges application.
- You can make Badges.
- You can look at a list of them.
- They can be edited.
- They can be assigned to people.
- You can revoke them from people.
- You can subscribe to them.
Test Plan: Make Badges with various options. Give them to people. Take them away from people.
Reviewers: lpriestley, epriestley
Reviewed By: epriestley
Subscribers: tycho.tatitscheff, johnny-bit, epriestley, Korvin
Maniphest Tasks: T6526
Differential Revision: https://secure.phabricator.com/D13626
Summary: Implements T8734
Test Plan: Verify that countdowns can have spaces associated with them. Verify that non-default spaces are displayed in the header of the countdowns in the result of the query.
Reviewers: lpriestley, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D13634
Summary: Implements T8733
Test Plan: Verify that spaces policies can be implemented in the creation and editing of polls.
Reviewers: lpriestley, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D13537
Summary: Ref T8726. The gruntwork part of this is finally over.
Test Plan:
- Made a huge rule with every field.
- Applied migration.
- Verified the rule was still the same.
- Pushed a bunch of commits and verified transcripts.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8726
Differential Revision: https://secure.phabricator.com/D13601
Summary: Ref T8726. Just (pre-commit content) one more left.
Test Plan:
- Created a big rule with every field.
- Migrated it.
- Verified the rule was still the same.
- Pushed a bunch of changes and reviewed the transcripts.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8726
Differential Revision: https://secure.phabricator.com/D13600
Summary: Ref T8726. Make all the DifferentialRevision stuff modular.
Test Plan:
- Created a rule with all fields.
- Ran upgrade.
- Saw all fields preserved with new modular versions.
- Used test console to run rule with all fields, verified field values as broadly sensible.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8726
Differential Revision: https://secure.phabricator.com/D13598
Summary: Ref T8726. This deals with all the Differential diff fields, same deal as previous changes.
Test Plan:
- Wrote a rule with every field.
- Migrated it.
- Saw the same rule working.
- Rigged the hell out of transcripts (diffs normally do not generate transcripts, because the only action is "block" and they don't exist yet when Herald runs).
- Verified that all fields looked sensible in the transcript.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8726
Differential Revision: https://secure.phabricator.com/D13590
Summary: Fixes T7604. This is the big scary change which drops the "arcanist project" fields from the database permanently.
Test Plan:
`grep`ped for the following to ensure that I had found all remaining references:
- `/arcanistProject/i`
- `/arcanist_project/i`
- `/projectName/i`
- `/project_name/i`
- `/project_id/i`
WARNING: Wait at least one month before landing this.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Maniphest Tasks: T7604
Differential Revision: https://secure.phabricator.com/D12899
Summary: Ref T8726.
Test Plan:
Created a giant rule with every commit field:
{F594686}
Ran the upgrade, got the same rule with new fields:
{F594688}
Used "Test Console" to run transcripts, saw all the fields populate correctly.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8726
Differential Revision: https://secure.phabricator.com/D13567
Summary:
Ref T8746. See discussion there. We could try harder to fix this but I suspect the number of affected installs is exceedingly small since it's ~18 months old. Requiring reconfiguration of credentials seems reasonable-ish.
Also fix a merge issue with Conpherence search.
Test Plan: N/A
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8746
Differential Revision: https://secure.phabricator.com/D13565
Summary: Ref T8726. Use modular fields for the Pholio adapter.
Test Plan:
- Created rule using all the old fields.
- Migrated, saw upgrade apply correctly.
- Created mock, reviewed transcript.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: eadler, epriestley
Maniphest Tasks: T8726
Differential Revision: https://secure.phabricator.com/D13513
Summary:
Ref T8726. The only notable bit here is that the "body" / "title" fields (which are currently shared across a bunch of types) are getting split into application variants.
Among other things, this will let us label the field "Commit message" for commits, for example.
Test Plan:
- Created a rule using all four fields.
- Applied patch, saw rule break ("unknown field").
- Ran storage upgrade, saw rule fix itself in the migration.
- Edited tasks, triggered rule, viewed transcripts.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: eadler, joshuaspence, epriestley
Maniphest Tasks: T8726
Differential Revision: https://secure.phabricator.com/D13501
Summary:
Ref T8726. There's no interface we can check for this, so the adapter needs to opt in.
Also fix a spelling mistake.
Test Plan: Created rules with "Application Email" fields.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8726
Differential Revision: https://secure.phabricator.com/D13499
Summary: Ref T8726. Continue making Herald fields more modular than they currently are.
Test Plan:
- Created a rule using all the affected fields.
- Ran the rule.
- Saw reasonable object field values.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: eadler, joshuaspence, epriestley
Maniphest Tasks: T8726
Differential Revision: https://secure.phabricator.com/D13495
Summary:
Ref T8488, T8469, T8485.
This is done in regards to T8488 as far as users are concerned. There's still some classes, and etc. that should be re-named probably. T8469 and T8485 are basically moot now though.
Rather than having "Send Message" exposed, just expose "Create Room". Users get the full form. One change is "title" is now required.
This diff removes the concept of "isRoom" entirely.
Test Plan: Verifed a user with no conpherences had sensible data in both column view and full conpherence view. Created rooms with various policies and things worked well.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: chad, epriestley, Korvin
Maniphest Tasks: T8469, T8485, T8488
Differential Revision: https://secure.phabricator.com/D13351
Summary:
Ref T8493. Diffusion is probably the strongest upstream use case we have for Spaces right now, so I want to get us on it to kick the tires a bit.
Small amount of hackiness around the multi-page form thing but it shouldn't create any problems.
Test Plan:
- Created a new repo.
- Edited a repo.
- Tried invalid edits, saw value preserved.
- Viewed edit full detail screen, saw space info.
- Viewed repo detail view, saw space.
- Viewed repo list view, saw space.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8493
Differential Revision: https://secure.phabricator.com/D13414
Summary:
Ref T8637. This does nothing interesting, just has empty scaffolding for a bulk job queue.
Basic idea is that when you do something like a batch edit in Maniphest, we:
- Create a BulkJob with all the details.
- Queue a worker to start the job.
- Send you to a progress bar page for the job.
In the background:
- The "start job" worker creates a ton of Task objects, then queues worker tasks to do the work.
In the foreground:
- Fancy ajax animates the progress bar and it goes wooosh.
In general:
- Big jobs actually work.
- Jobs get logged.
- You can monitor jobs.
- Terrible junk like T8637 should be much harder to write and much easier to catch and diagnose.
Test Plan:
No interesting code/beahavior yet. Clean `storage adjust`.
{F526411}
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8637
Differential Revision: https://secure.phabricator.com/D13392
Summary: Ref T5791. This should make performance snappy wrt policy checks in some future diff where the Query is updated and in use somewhere in the application.
Test Plan: ran `./bin/storage upgrade`. commented on a task and saw actorPHID populated correctly in underlying MetaMTAMail object database entry
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5791
Differential Revision: https://secure.phabricator.com/D13396
Summary:
Ref T5791. This does a few bits there. Namely:
- Adds PHID column to PhabricatorMetaMTAMail
- Implements a PhabricatorMetaMTAMailPHIDType
- Script to backpopulate them.
- Makes PhabricatorMetaMTAMail implement PolicyInterface.
- View policy is NOONE and the author and recipients have automatic view capabilities
- No edit capability.
- Adds a PhabricatorMetaMTAMailQuery for PhabricatorMetaMTAMail.
Test Plan: ran `./bin/storage upgrade` successfully. commented on a maniphest task and verifed the metamta mail object in the database was created successfully with a shiny new phid
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5791
Differential Revision: https://secure.phabricator.com/D13394
Summary:
Fixes T5135. Currently, when you create a credential, we default the policies to your PHID. This means we can't have an application-level configurable default because there's no way to select "the actor's PHID" as a policy.
Start tracking the credential author's PHID and add an object policy for it, so there is such a setting.
Then, add policy defaults.
This mostly unblocks T6787. This obsoletes T6860.
Test Plan:
- Created a credential with "Credential Author" policy.
- Verified I can see/edit it, but other users can not.
- Changed default policies to something else.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5135
Differential Revision: https://secure.phabricator.com/D13385
Summary:
Ref T8095. Two general problems:
- I want Harbormaster to own all lint and unit test results.
- I don't want users to have to configure anything for `arc` to keep working automatically.
These are in conflict because generic lint/unit test ownership in Harbormaster requires that build targets exist which we can attach build results to. However, we can't currently create build targets on demand: Harbormaster assumes it is responsible for creating targets, then running code or making third-party service calls to actually run the builds.
I considered two broad approaches to let `arc` push results into Harbormaster without requiring administrators to configure some kind of "arc results" build plan:
# Add magic target PHIDs like `PHID-MAGIC-this-is-really-arc-unit`.
# Add new code to build real targets with real PHIDs.
(1) is probably a bit less work to get off the ground, but I think it's worse overall and very likely to create more problems in the long run. I particularly worry that it will lead to a small amount of special casing in a very large number of places, which seems more fragile.
(2) is more work upfront but I think does a better job of putting all the special casing in one place that we can, e.g., more reasonably unit test, and letting the rest of the code rarely/never care about this case since it's just dealing with normal plans/steps/targets as far as it can tell.
This diff introduces "autoplans", which are source templates for plans/steps. This let us "push" these targets into Harbormaster. Hypthetically, any process "like" arc can use autoplans to upload test/lint/etc results. In practice, probably only `arc` will ever use this, but I think it's still quite a bit cleaner than the alternative despite all the generality.
Workflow is basically:
- `arc` creates a diff.
- `arc` calls `harbormaster.queryautotargets`, passing the diff PHID and saying "I have some lint and unit results I want to stick on this thing".
- Harbormaster builds the plan, steps, and targets (if any of them don't already exist), and hands back the target PHIDs so `arc` has a completely standard-looking place to put results.
- `arc` uploads the test results to the right targets, as though Harbormaster had asked it to run unit/lint in the first place.
(This doesn't actually do any of that yet, just sets things up.)
I'll maybe doc turn that ^^^^^^ into a doc for posterity since I think it's hard to guess what an "autotarget" is, but I'm going to grab some lunch first.
Test Plan:
- Added unit tests to make sure we can build these things properly.
- Used `harbormaster.queryautotargets` to build autotargets for a bunch of diffs.
- Verified targets come up in "waiting for message" state.
- Verified plans and steps are not editable.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: hach-que, epriestley
Maniphest Tasks: T8095
Differential Revision: https://secure.phabricator.com/D13345
Summary:
Ref T8095.
Harbormaster has a `BuildItem` class, but it has no table and is unused. This was an earlier idea about representing lint/unit results and some other possible types of messages, but I think we want to be more specific than this.
Remove `BuildItem` and add `Lint` and `Unit` storage. These tables roughly parallel how we store lint/unit messages today, with some guesses about how where they'll go in the future.
Test Plan: Ran `bin/storage upgrade` and got a clean adjust out of it.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: hach-que, epriestley
Maniphest Tasks: T8095
Differential Revision: https://secure.phabricator.com/D13329
Summary: Fixes T8352. Associate Diviner books and atoms with a repository. This relationship is not really surfaced anywhere in the UI but provides metadata that contextualises search results. Depends on D13091.
Test Plan: Ran `diviner generate --repository ARC` and then went to `/diviner/book/arcanist/`.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7703, T8352
Differential Revision: https://secure.phabricator.com/D13070
Summary:
Ref T4558. This diff modernizes the #diviner application. Basically:
- Add an edit controller, accessible at `/book/$BOOK/edit/`.
- Add edit/view policies.
- Added an action menu to the `DivinerBookController` to expose the edit interface.
- Allows projects to be associated with books.
- Implement edges and transactions.
- Implemented `PhabricatorApplicationTransactionInterface` in `DivinerLiveBook`.
Test Plan:
- Generated a Diviner book with `./bin/diviner generate`.
- Added projects to a book and ensured that they persisted.
- Changed the view policy on a book and made sure it was effective.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T4558
Differential Revision: https://secure.phabricator.com/D13091
Summary:
Ref T8498. Allow ApplicationEmail addresses to be put into spaces:
- You can only see and send to addresses in Spaces you have access to.
- Objects are created into the same space their address is associated with.
Test Plan:
- Used `bin/mail receive-test` to send mail to various `xyz-bugs@...` addresses.
- Saw objects created in the proper space.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8498
Differential Revision: https://secure.phabricator.com/D13247
Summary:
Ref T8498. I want to add Spaces to these, and the logic for getting Spaces right is a bit tricky, so swap these to ApplicationTransactions.
One new piece of tech: made it easier for Editors to raise DuplicateKeyException as a normal ValidationException, so callers don't have to handle this case specially.
One behavioral change: we no longer require these addresses to be at the `auth.email-domains` domains -- I think this wasn't quite right in the general case. It's OK to require users to have `@mycompany.com` addresses but add `@phabricator.mycompany-infrastructure.com` addresses here if you want.
Test Plan:
- Tried to create a duplicate email.
- Tried to create an empty email.
- Tried to create an invalid email.
- Created a new email.
- Deleted an email.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8498
Differential Revision: https://secure.phabricator.com/D13246
Summary:
Ref T8377. This adds a standard disable/enable feature to Spaces, with a couple of twists:
- You can't create new stuff in an archived space, and you can't move stuff into an archived space.
- We don't show results from an archived space by default in ApplicationSearch queries. You can still find these objects if you explicitly search for "Spaces: <the archived space>".
So this is a "put it in a box in the attic" sort of operation, but that seems fairly nice/reasonable.
Test Plan:
- Archived and activated spaces.
- Used ApplicationSearch, which omitted archived objects by default but allowed searches for them, specifically, to succeed.
- Tried to create objects into an archived space (this is not allowed).
- Edited objects in an archived space (this is OK).
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8377
Differential Revision: https://secure.phabricator.com/D13238
Summary:
Ref T8493. Tricks:
- "Create Similar Task" and "Create Subtask" should copy the parent's Space.
- Normal list view + workboard card view.
Test Plan:
- Created a task, edited space, etc.
- Viewed tasks with different users.
- Created a "Similar Task" (saw proper Space).
- Created a subtask (saw proper Space).
- Viewed workboard.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8493
Differential Revision: https://secure.phabricator.com/D13232
Summary:
Ref T8493. Add Spaces support to Pholio.
This is straightforward; Pholio has no clone/copy/fork or weird parent/child stuff going on.
Test Plan: Created a mock, put it in a space, looked at it as another user, searched for stuff in spaces, viewed Macros.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8493
Differential Revision: https://secure.phabricator.com/D13231
Summary:
Fixes T8483. I did this incorrectly in D13159, by doing it correctly first and then editing it carelessly. For most transaction types, it didn't matter, but did for inline state.
Also, clean up any bad inline state transactions.
Test Plan:
- Ran migration, bad transactions vanished.
- Marked some inline comments as done.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8483
Differential Revision: https://secure.phabricator.com/D13226
Summary: Ref T8441. Ref T7715. Ref T7909. Clean up all the ordering and grouping hacks in Maniphest so we can drive it through normal infrastructure, move it to SearchField, introduce Spaces, and eventually modernize the Conduit API.
Test Plan:
- Executed all grouping/ordering queries, including custom queries.
- Forced execution with old aliases; got modern results.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7909, T7715, T8441
Differential Revision: https://secure.phabricator.com/D13197
Summary:
Ref T8455. It looks like for at least some installs, there are a lot of rules which use mailing lists and they aren't easy to just manually go fix.
Migrate conditions and actions of known types which contain mailing list PHIDs from old MLST PHIDs to new USER PHIDs.
Test Plan:
- Created a "Subscribers include..." condition using a mailing list, migrated it forward into a user.
- Created a "add ccs..." action including a mailing list, migrated it forward into a user.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8455
Differential Revision: https://secure.phabricator.com/D13184
Summary:
Ref T8424. I'm using Paste as a testbed application because Spaces make some degree of sense for it but it's also flat/simple.
This doesn't do anything interesting or useful and mostly just making the next (more interesting) diff smaller.
Test Plan:
- Ran `bin/storage upgrade -f`.
- Browsed pastes.
- Created a paste.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8424
Differential Revision: https://secure.phabricator.com/D13154
Summary:
Ref T8387. This migrates lists in the database to users, and replaces all subscriptions.
This won't update Herald rules or saved search queries, but they're presumably rare and infeasibly complex to migrate.
Test Plan: This migration is relatively re-runnable, so I ran it a bunch of times with different setups using `bin/storage adjust --apply`. It successfully migrated lists into users and replaced them in all the places they were subscribed.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: eadler, epriestley
Maniphest Tasks: T8387
Differential Revision: https://secure.phabricator.com/D13128
Summary:
Ref T8387. Adds new mailing list users.
This doesn't migrate anything yet. I also need to update the "Email Addresses" panel to let administrators change the list address.
Test Plan:
- Created and edited a mailing list user.
- Viewed profile.
- Viewed People list.
- Searched for lists / nonlists.
- Grepped for all uses of `getIsDisabled()` / `getIsSystemAgent()` and added relevant corresponding behaviors.
- Hit the web/api/ssh session blocks.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: eadler, tycho.tatitscheff, epriestley
Maniphest Tasks: T8387
Differential Revision: https://secure.phabricator.com/D13123
Summary: Fixes T8375. This column is `repositoryID`, not `repository`.
Test Plan: Examined schema.
Reviewers: joshuaspence, btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T8375
Differential Revision: https://secure.phabricator.com/D13097
Summary: Ref T7604. Change two migrations to query arcanist project information using `queryfx` directly to avoid the need for the `LiskDAO` fields to exist.
Test Plan:
Ran the following commands to verify that things weren't majorly broken:
- `./bin/storage upgrade --apply phabricator:20150503.repositorysymbols.2.php`
- `./bin/storage upgrade --no-quickstart --namespace test`
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7604
Differential Revision: https://secure.phabricator.com/D13011
Summary:
Ref T7447. Implements per-viewer comment hiding. Once a comment is obsolete or uninteresting, you can hide it completely.
This is sticky per-user.
My hope is that this will strike a better balance between concerns than some of the other approaches (conservative porting, summarization, hide-all).
Specifically, this adds a new action here:
{F435621}
Clicking it completely collapses the comment into a small icon on the previous line, and saves the comment state as hidden for you:
{F435626}
You can click the icon to reveal all hidden comments below the line.
Test Plan:
- Hid comments.
- Showed comments.
- Created, edited, deleted and submitted comments.
- Used Diffusion comments (hiding is not implemented there yet, but I'd plan to bring it there eventually if it works out in Differential).
Reviewers: btrahan, chad
Reviewed By: btrahan
Subscribers: jparise, yelirekim, epriestley
Maniphest Tasks: T7447
Differential Revision: https://secure.phabricator.com/D13009
Summary: Ref T7604. This migration doesn't actually work because it is in the wrong directory.
Test Plan: Ran `./bin/storage upgrade` and saw the migration applied.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Maniphest Tasks: T7604
Differential Revision: https://secure.phabricator.com/D13014
Summary: Ref T7604. Remove arcanist projects from #releeph.
Test Plan: I don't really know how to use Releeph but I clicked around and nothing seemed too broken.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7604
Differential Revision: https://secure.phabricator.com/D12898
Summary: Fixes T8240, probably?
Test Plan: This is hard to test locally post-migration -- @btrahan, does it fix things for you?
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: btrahan, epriestley
Maniphest Tasks: T8240
Differential Revision: https://secure.phabricator.com/D12903
Summary:
Fixes T7977.
- Move Indexed Languages and See Symbols From config to Repository
- Make symbol search skip projects
This also makes the default languages to Everything instead of Nothing.
Test Plan:
- Browse files, click symbols.
- Use quick search to find symbols
- Browse revision, click symbols
Reviewers: joshuaspence, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Maniphest Tasks: T7977
Differential Revision: https://secure.phabricator.com/D12687
Summary: This adds the bare minimum transaction set for editing posts. Fixes T7626 because now files will be correctly attached to phame posts on subsequent edits. Future work here should be adding transaction types like `TYPE_BLOG` for when posts are moved between blogs, `TYPE_VISIBILITY` for when posts are moved to published, etc. Nothing too tricky there but keeping this diff relatively small seems prudent.
Test Plan: made posts successfully. also made errors like no title, no phame title, and duplicate phame title and got correct errors. added a file to a post and verified file has phame post in "attached" tab, which should fix T7626.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7626
Differential Revision: https://secure.phabricator.com/D12864
Summary:
Fixes T8209. Using handles can now cause cache fills as a side effect of T7707. Use a raw query instead.
I'll follow up on T8209 with some context and ideas for longer-term fixes.
Test Plan:
- Set event names to `''`.
- Reran migration with `--apply ... --trace`.
- Saw migration work correctly without executing cache fills.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8209
Differential Revision: https://secure.phabricator.com/D12858
Summary: Ref T7626. Modernizes the code a bit here so we can eventually make progress on T7626 and other stuff.
Test Plan: made a blog, edited a blog, made errors - stuff looked good
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7626
Differential Revision: https://secure.phabricator.com/D12849
Summary:
Ref T8183. See that task for discussion.
- For now, events always mark users as "Away".
- In the future, we may reintroduce "sporradic" or other more complicated availability states, but they would be properties of the invitee, not of the event itself.
- This also removes the long-deprecated `user.addstatus` and `user.removestatus` Conduit calls.
Test Plan:
- Created, edited, viewed events.
- Grepped for removed symbols.
- Viewed profile calendar.
- Viewed Conpherence calendar.
- Load Conduit console.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8183
Differential Revision: https://secure.phabricator.com/D12840
Summary: Ref T7707. Caches availability on users to reduce the cost of loading handles. This cache is very slightly tricky to dirty properly.
Test Plan:
- Use DarkConsole to examine queries; saw cache hits, miss+fill, dirty.
- Saw availability change correctly after canceling, joining, declining events.
- Saw no queries to Calendar for pages with only availability data.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7707
Differential Revision: https://secure.phabricator.com/D12838
Summary:
Ref T7707. The general form of this can probably be refined somewhat over time as we have more use cases.
I put this cache on the user object itself because we essentially always need this data and it's trivial to invalidate the cache (we can do it implicilty during reads).
Also fix an issue with short, wide images not thumbnailing properly after recent changes.
Test Plan:
- Loaded some pages; saw caches write; saw good pictures.
- Reloaded; saw cache reads; saw good pictures.
- Changed profile picture; saw immediate update.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7707
Differential Revision: https://secure.phabricator.com/D12826
Summary: Closes T8048, Calendar event detail view should show "Unnamed Event" as title for events with no title
Test Plan: Open an old event created before titles were required, event detail view should display title as "Unnamed Event" instead of a blank title
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T8048
Differential Revision: https://secure.phabricator.com/D12736
Summary: Fixes T7254. This reverts the previous functionality, but makes pertinent updates like scaling the images to 35 x 35. Codebase had moved on quite a bit so far from a straight revert but nothing too tricky relative to the code that was here before. This does not allow for changing the images from the conpherence durable column view -- that would require some JS trickery, but also doesn't fit into the current notion of the column being "light". Can always modify this later.
Test Plan:
- from full conpherence, uploaded a square pic and things looked nice
- from full conpherence, uploaded a rectangular pic and wasnt happy, so reinvoked edit dialog and used crop control to make it better
- noted could not update picture from conpherence durable column
- used different user and noted could see custom picture
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: CodeMouse92, Korvin, epriestley
Maniphest Tasks: T7254
Differential Revision: https://secure.phabricator.com/D12648
Summary: Fixes T7220. Ref T7977. Changes symbols from being bound to an Arcanist project to being bound to a repository.
Test Plan:
- Added symbols and then applied migrations, symbols seemed to be migrated successfully.
- Tested the `/diffusion/symbol/$SYMBOL_NAME` endpoint.
- Tested the `/diffusion/symbol/$SYMBOL_NAME` endpoint with the `?repositories=$REPOSITORY_PHID` parameter.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: avivey, Korvin, epriestley
Maniphest Tasks: T7977, T7220
Differential Revision: https://secure.phabricator.com/D12608
Summary:
Ref T6930. This application collects and displays performance samples -- roughly, things Phabricator spent some kind of resource on. It will collect samples on different types of resources and events:
- Wall time (queries, service calls, pages)
- Bytes In / Bytes Out (requests)
- Implicit requests to CSS/JS (static resources)
I've started with the simplest case (static resources), since this can be used in an immediate, straghtforward way to improve packaging (look at which individual files have the most requests recently).
There's no aggregation yet and a lot of the data isn't collected properly. Future diffs will add more dimension data (controllers, users), more event and resource types (queries, service calls, wall time), and more display options (aggregation, sorting).
Test Plan: {F389344}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6930
Differential Revision: https://secure.phabricator.com/D12623
Summary: Closes T7940, Calendar events should have edit/view policies.
Test Plan: Create new event and save, event should be only visible and editable by creator. Editing policies should correctly set the permissions of editing/viewing the event.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Maniphest Tasks: T7940
Differential Revision: https://secure.phabricator.com/D12632
Summary: Closes T7935, Calendar events should now auto-invite the creator.
Test Plan: Create event, save, event should now show creator as an invitee.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Maniphest Tasks: T7935
Differential Revision: https://secure.phabricator.com/D12613
Summary: Closes T7943, Canceling calendar event should deactivate the event instead of destroying data.
Test Plan: Create an event, cancel it, see changed status icon, query for active events, event should not appear, query for deactivated events, event should appear in results.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7943
Differential Revision: https://secure.phabricator.com/D12604
Summary: Closes T7953, Calendar events should now have a 'Name' field.
Test Plan: Create or edit event with no title, save event, should get error requiring name, event detail view timeline should reflect name changes.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Maniphest Tasks: T7953
Differential Revision: https://secure.phabricator.com/D12591
Summary: Closes T7945, phabricator_calendar db should now have Edge tables.
Test Plan: Use phabricator_calendar db in mysql, show create table edge, verify edge tables are present.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7945
Differential Revision: https://secure.phabricator.com/D12584
Summary: Ref T6160. Ref T7100. Mercurial branch heads can be closed; track this state so we can be smarter about it.
Test Plan: Closed a branch, run `repository update`, saw it close in the cursor table.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6160, T7100
Differential Revision: https://secure.phabricator.com/D12550
Summary:
See some earlier discussion in D11593:
> One thing I'm vaguely thinking about is the possibilty that users may be able to invoice one another directly, eventually. For example, we might invoice a contracting client.
> We might need an `isInvoice` flag eventually, but `subscriptionPHID` is a reasonable stand-in for now.
This adds such a flag.
Test Plan:
- Generated an ad-hoc invoice and verified it showed up in the right place.
- Used `bin/phortune invoice` to invoice a subscription and verified it worked correctly.
- Paid an invoice and saw it leave "pending invoices" status.
{F377029}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D12480
Summary:
Fixes T7601. Ref T7803, weakly (this removes a Query subclass with ad-hoc paging). Herald has a very old edit log which predates transactions and is essentially useless and not really policy-aware. I think it's doing more harm than good; remove it.
Herald rules have proper transactions, but rule edits don't currently render something nice into the transaction log. This is definitely the way forward, but we haven't seen requests for this so don't bother building it for now.
I did put a nice end-cap on the transaction log, though.
Test Plan:
- Viewed Herald UI.
- Grepped for removed classes and methods.
- Edited a rule.
- Viewed rule transaction log.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: cburroughs, chad, epriestley
Maniphest Tasks: T7601, T7803
Differential Revision: https://secure.phabricator.com/D12346
Summary: These arrays looks a little odd, most likely due to the autofix applied by `ArcanistXHPASTLinter::LINT_ARRAY_SEPARATOR`. See D12296 in which I attempt to improve the autocorrection from this linter rule.
Test Plan: N/A
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D12281
Summary: Ref T7582. Also adds the basic logic for "rooms" implementation. Also makes sure we use the initializeNewThread method as appropriate.
Test Plan: made a new conpherence and it worked!
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7582
Differential Revision: https://secure.phabricator.com/D12103
Summary: Fixes T7583. We also add `key_room`, which uses isRoom and dateModified since a very common view of rooms is going to be ordered by last updated.
Test Plan: made the conpherence view controller query specify `withIsRoom(true)` and `withIsRoom(false)`. The former made the controller correctly 404 while the latter had no change in functionality.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7583
Differential Revision: https://secure.phabricator.com/D12102
Summary:
Ref T7149. This flags allocated but incomplete files and doesn't explode when trying to download them.
Files are marked complete when the last chunk is uploaded.
I added a key on `<authorPHID, isPartial>` so we can show you a list of partially uploaded files and prompt you to resume them at some point down the road.
Test Plan: Massaged debugging settings and uploaded README.md very slowly in 32b chunks. Saw the file lose its "Partial" flag when the last chunk finished.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: joshuaspence, epriestley
Maniphest Tasks: T7149
Differential Revision: https://secure.phabricator.com/D12063
Summary:
Ref T7149. This isn't complete and isn't active yet, but does basically work. I'll shore it up in the next few diffs.
The new workflow goes like this:
> Client, file.allocate(): I'd like to upload a file with length L, metadata M, and hash H.
Then the server returns `upload` (a boolean) and `filePHID` (a PHID). These mean:
| upload | filePHID | means |
|---|---|---|
| false | false | Server can't accept file.
| false | true | File data already known, file created from hash.
| true | false | Just upload normally.
| true | true | Query chunks to start or resume a chunked upload.
All but the last case are uninteresting and work like exising uploads with `file.uploadhash` (which we can eventually deprecate).
In the last case:
> Client, file.querychunks(): Give me a list of chunks that I should upload.
This returns all the chunks for the file. Chunks have a start byte, an end byte, and a "complete" flag to indicate that the server already has the data.
Then, the client fills in chunks by sending them:
> Client, file.uploadchunk(): Here is the data for one chunk.
This stuff doesn't work yet or has some caveats:
- I haven't tested resume much.
- Files need an "isPartial()" flag for partial uploads, and the UI needs to respect it.
- The JS client needs to become chunk-aware.
- Chunk size is set crazy low to make testing easier.
- Some debugging flags that I'll remove soon-ish.
- Downloading works, but still streams the whole file into memory.
- This storage engine is disabled by default (hardcoded as a unit test engine) because it's still sketchy.
- Need some code to remove the "isParital" flag when the last chunk is uploaded.
- Maybe do checksumming on chunks.
Test Plan:
- Hacked up `arc upload` (see next diff) to be chunk-aware and uploaded a readme in 18 32-byte chunks. Then downloaded it. Got the same file back that I uploaded.
- File UI now shows some basic chunk info for chunked files:
{F336434}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: joshuaspence, epriestley
Maniphest Tasks: T7149
Differential Revision: https://secure.phabricator.com/D12060
Summary:
Fixes T7422. After the recent fix for "sort" columns, we can end up with invalid SQL in some cases when running quickstart.
In particular, we do "COLLATE binary CHARACTER SET utf8_general_ci" (which is invalid).
Preprocess these so we get "COLLATE utf8 CHARACTER SET utf8_general_ci" (which is valid and correct).
Test Plan: Ran `bin/storage upgrade -f --namespace blahblhbaba` with and without `--disable-utf8mb4`.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7422
Differential Revision: https://secure.phabricator.com/D11929
Summary:
Ref T7352. We were previously identifying things by `<daemonClass, overseerPID, startTime>` but that's not unique in a world where one overseer can run multiple daemons.
We already have an internal "daemonID", it just doesn't get written into the DB right now.
Start writing it, then use it to clean up `phd status`.
Test Plan: Ran `phd status`, got more accurate/useful output than previously.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7352
Differential Revision: https://secure.phabricator.com/D11865
Summary:
Ref T6840. This feels a little dirty; open to alternate suggestions.
We currently have a race condition where multiple daemons may load a commit and then save it at the same time, when processing "reverts X" text. Prior to this feature, two daemons would never load a commit at the same time.
The "reverts X" load/save has no effect (doesn't change any object properties), but it will set the state back to the loaded state on save(). This overwrites any flag updates made to the commit in the meantime, and can produce the race in T6840.
In other cases (triggers, harbormaster, repositories) we deal with this kind of problem with "append-only-updates + single-consumer", or a bunch of locking. There isn't really a good place to add a single consumer for commits, since a lot of daemons need to access them. We could move the flags column to a separate table, but this feels pretty complicated. And locking is messy, also mostly because we have so many consumers.
Just exempting this column (which has unusual behavior) from `save()` feels OK-ish? I don't know if we'll have other use cases for this, and I like it even less if we never do, but this patch is pretty small and feels fairly understandable (that said, I also don't like that it can make some properties just silently not update if you aren't on the lookout).
So, this is //a// fix, and feels simplest/least-bad for the moment to me, I thiiink.
Test Plan: Added and executed unit tests.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6840
Differential Revision: https://secure.phabricator.com/D11822
Summary: Fixes T7159.
Test Plan:
Created a legalpad document that needed a signature and I was required to sign it no matter what page I hit. Signed it and things worked! Added a new legalpad document and I had to sign again!
Ran unit tests and they passed!
Logged out as a user who was roadblocked into signing a bunch of stuff and it worked!
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7159
Differential Revision: https://secure.phabricator.com/D11759
Summary:
Ref T7152. This implements the administrative UI for the upstream email invite workflow.
Pieces of this will be reused in Instances to implement the instance invite workflow, although some of it is probably going to be a bit copy/pastey.
This doesn't actually create or send invites yet, and they still can't be carried through registration.
Test Plan:
{F290970}
{F290971}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7152
Differential Revision: https://secure.phabricator.com/D11733
Summary:
Ref T7152. This builds the core of email invites and implements all the hard logic for them, covering it with a pile of tests.
There's no UI to create these yet, so users can't actually get invites (and administrators can't send them).
This stuff is a complicated mess because there are so many interactions between accounts, email addresses, email verification, email primary-ness, and user verification. However, I think I got it right and got test coverage everwhere.
The degree to which this is exception-driven is a little icky, but I think it's a reasonable way to get the testability we want while still making it hard for callers to get the flow wrong. In particular, I expect there to be at least two callers (one invite flow in the upstream, and one derived invite flow in Instances) so I believe there is merit in burying as much of this logic inside the Engine as is reasonably possible.
Test Plan: Unit tests only.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7152
Differential Revision: https://secure.phabricator.com/D11723
Summary: Fixes T7153.
Test Plan:
used `bin/auth trust-oauth-client` and `bin/auth untrust-oauth-client` to set the bit and verify error states.
registered via oauth with `bin/auth trust-oauth-client` set and I did not have the confirmation screen
registered via oauth with `bin/auth untrust-oauth-client` set and I did have the confirmation screen
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7153
Differential Revision: https://secure.phabricator.com/D11724
Summary: Ref T7153. I am not sure if this is 100% correct because sometimes you have to POST vs GET and I don't know if the redirect response will / can do the right thing? I think options to fix this would be to 1) restrict this functionality to JUST the Phabricator OAuth provider type or 2) something really fancy with an HTTP(S) future. The other rub right now is when you logout you get half auto-logged in again... Thoughts on that?
Test Plan: setup my local instance to JUST have phabricator oauth available to login. was presented with the dialog automagically...!
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7153
Differential Revision: https://secure.phabricator.com/D11701
Summary:
I'm hitting this in the cluster and couldn't figure it out after staring at it for a couple minutes. Produce a better error.
This dumps a hash of each configuration key value which is set to a non-default value into the daemon log. This is much more compact than the full config, and doesn't spread secrets around, so it seems like a good balance between providing information and going crazy with it.
Test Plan: {F284139}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11699
Summary:
Ref T6881.
- Allow users to set a default payment method for a subscription, which we'll try to autobill (not all payment methods are autobillable, so we can't require this in the general case, and a charge might fail anyway).
- If a subscription has an autopay method, try to automatically bill it.
- Otherwise, we'll send them an email like "hey here's a bill, it couldn't autopay for some reasons, go pay it and fix those if you want".
- (That email doesn't exist yet but there's a comment about it.)
- Also some UI cleanup.
Test Plan:
- Used `bin/phortune invoice` to autobill myself some fake test money.
{F279416}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6881
Differential Revision: https://secure.phabricator.com/D11596
Summary:
Ref T6881. This generates a product, purchase and invoice for users, and there's sort of some UI for them. Stuff it doesn't do yet:
- Try to autobill when we have a CC;
- actually tell the user they should pay it;
- ask the application for anything like "how much should we charge", or tell the application anything like "the user paid".
However, these work:
- You can //technically// pay the invoices.
- You can see the invoices you paid in the past.
Test Plan: Used `bin/phriction invoice` to double-bill myself over and over again. Paid one of the invoices.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6881
Differential Revision: https://secure.phabricator.com/D11580
Summary: Fixes T3404 (post D11565), fixes T5952. This infrastructure has been getting deployed against Maniphest and its time to get these other two applications going on it.
Test Plan: created an email address for paste and used `./bin/mail receive-test` ; a paste was successfully created
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T5952, T3404
Differential Revision: https://secure.phabricator.com/D11570
Summary: Ref T5952. This adds support for a "default author" and deploys it on Maniphest.
Test Plan: used augmented (by this diff) bin/mail receive-test to test creation via an application email with a default author configured and no author specified. a task was created with the author as the default author i configured.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T5952
Differential Revision: https://secure.phabricator.com/D11446
Summary:
Ref T6881. This roughs in the major objects, support classes, and controllers.
- Show subscriptions on account detail.
- Browse all account subscriptions.
- Link to active subsciptions from merchant detail.
Test Plan: Clicked around in the UI. There's no way to create subscriptions yet, so I basically just kicked the tires on this. I probably missed a few things that I'll clean up in followups.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6881
Differential Revision: https://secure.phabricator.com/D11482
Summary: Fixes T7050. I got the regexp slightly wrong and didn't catch it because it works fine on modern MySQL.
Test Plan: `arc unit --everything` still passes.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T7050
Differential Revision: https://secure.phabricator.com/D11522
Summary:
One advantage I wanted to get out of T1191 is automated rebuilds of `quickstart.sql`. If they don't actually work, I'd like to know sooner rather than later. We haven't rebuilt in a couple months, so give it a shot.
Ran into two issues:
- Some very old patches specify overlong keys which don't work if your default charsets are utf8mb4. Shorten these. No real users have applied these in a very long time.
- Some gymnastics around `corpus` for the new Conpherence search index.
Test Plan:
- Ran `arc unit --everything`, got clean results.
- Cost to do a storage upgrade on an empty namespace dropped from ~4s to ~3s.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11454
Summary: Ref T5952, T3404. This lays the basic plumbing for how this will work, all the way to deploying on Maniphest. Aside from what is mentioned on T5952, I think page(s) on editing application emails could use a little more helpful text about what's going on, similar to how the config page that's getting deprecated works.
Test Plan: ran migration and noted my create email address migrated successfully. used bin/mail to make a task. added another email and used bin/mail to make a task. deleted an email. edited an email. invoked various error states and they all looked good.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T3404, T5952
Differential Revision: https://secure.phabricator.com/D11418
Summary:
Ref T6881. Hopefully, this is the hard part.
This adds a new daemon (the "trigger" daemon) which processes triggers, schedules them, and then executes them at the scheduled time. The design is a little complicated, but has these goals:
- High resistance to race conditions: only the application writes to the trigger table; only the daemon writes to the event table. We won't lose events if someone saves a meeting at the same time as we're sending a reminder out for it.
- Execution guarantees: scheduled events are guaranteed to execute exactly once.
- Support for arbitrarily large queues: the daemon will make progress even if there are millions of triggers in queue. The cost to update the queue is proportional to the number of changes in it; the cost to process the queue is proportional to the number of events to execute.
- Relatively good observability: you can monitor the state of the trigger queue reasonably well from the web UI.
- Modular Infrastructure: this is a very low-level construct that Calendar, Phortune, etc., should be able to build on top of.
It doesn't have this stuff yet:
- Not very robust to bad actions: a misbehaving trigger can stop the queue fairly easily. This is OK for now since we aren't planning to make it part of any other applications for a while. We do still get execute-exaclty-once, but it might not happen for a long time (until someone goes and fixes the queue), when we could theoretically continue executing other events.
- Doesn't start automatically: normal users don't need to run this thing yet so I'm not starting it by default.
- Not super well tested: I've vetted the basics but haven't run real workloads through this yet.
- No sophisticated tooling: I added some basic stuff but it's missing some pieces we'll have to build sooner or later, e.g. `bin/trigger cancel` or whatever.
- Intentionally not realtime: This design puts execution guarantees far above realtime concerns, and will not give you precise event execution at 1-second resolution. I think this is the correct goal to pursue architecturally, and certainly correct for subscriptions and meeting reminders. Events which execute after they have become irrelevant can simply decline to do anything (like a meeting reminder which executes after the meeting is over).
In general, the expectation for applications is:
- When creating an object (like a calendar event) that needs to trigger a scheduled action, write a trigger (and save the PHID if you plan to update it later).
- The daemon will process the event and schedule the action efficiently, in a race-free way.
- If you want to move the action, update the trigger and the daemon will take care of it.
- Your action will eventually dump a task into the task queue, and the task daemons will actually perform it.
Test Plan:
Using a test script like this:
```
<?php
require_once 'scripts/__init_script__.php';
$trigger = id(new PhabricatorWorkerTrigger())
->setAction(
new PhabricatorLogTriggerAction(
array(
'message' => 'test',
)))
->setClock(
new PhabricatorMetronomicTriggerClock(
array(
'period' => 33,
)))
->save();
var_dump($trigger);
```
...I queued triggers and ran the daemon:
- Verified triggers fire;
- verified triggers reschedule;
- verified trigger events show up in the web UI;
- tried different periods;
- added some triggers while the daemon was running;
- examined `phd debug` output for anything suspicious.
It seems to work in trivial use case, at least.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6881
Differential Revision: https://secure.phabricator.com/D11419
Summary: ...also adds policies on who can view and who can edit an action. Fixes T6949.
Test Plan: viewed a secret through the new UI and it worked
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6949
Differential Revision: https://secure.phabricator.com/D11401
Summary:
Ref T3165. Builds a dedicated index for Conpherence to avoid scale/policy filtering concerns.
- This is pretty one-off but I think it's generally OK.
- There's no UI for it.
- `ConpherenceFulltextQuery` is very low-level. You would need to do another query on the PHIDs it returns to actually show anything to the user.
- The `previousTransactionPHID` is so you can load chat context efficiently. Specifically, if you want to show results like this:
> previous line of context
> **line of chat that matches the query**
> next line of context
...you can read the previous lines out of `previousTransactionPHID` directly, and the next lines by issuing one query with `WHERE previousTransactionPHID IN (...)`.
I'm not 100% sure this is useful, but it seemed like a reasonable thing to provide, since there's no way to query this efficiently otherwise and I figure a lot of chat might make way more sense with a couple of lines of context.
Test Plan:
- Indexed a thread manually (whole thing indexed).
- Indexed a thread by updating it (just the new comment indexed).
- Wrote a hacky test script and got reasonable-looking query results.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3165
Differential Revision: https://secure.phabricator.com/D11234
Summary: Ref T5655. Fixes T6849. This is another take on D11131, which was missing the DB migration and was reverted in rP7c4de0f6be77ddaea593e1f41ae27211ec179a55.
Test Plan: Ran `./bin/storage upgrade` and verified that the classes were renamed in the `phabricator_policy.policy` table.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6849, T5655
Differential Revision: https://secure.phabricator.com/D11166
Summary: This class is no longer used after D10965.
Test Plan: `grep`
Reviewers: btrahan, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11133
Summary: Modernize remaining edges to subclass `PhabricatorEdgeType`. Largely based on D11045.
Test Plan: Browsed around and performed various actions include subscribing, unsubscribing and watching.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11116
Summary: Modernize Project edges to subclass `PhabricatorEdgeType`. Largely based on D11045.
Test Plan: Add a member to a project, saw new rows in the `phabricator_project.edge` and `phabricator_user.edge` tables.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11111
Summary: Modernize Differential edges to subclass `PhabricatorEdgeType`. Largely based on D11045.
Test Plan: From previous experience, these changes are fairly trivial and safe. I poked around a little to make sure things looked reasonably okay.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, Krenair, epriestley
Differential Revision: https://secure.phabricator.com/D11074
Summary: T5549
Test Plan: Set edit policy on paste, check that only users meeting the policy requirements can edit it.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Maniphest Tasks: T5549
Differential Revision: https://secure.phabricator.com/D11097
Summary: Ref T5402. This more or less "fixes" it but there's probably some polish to do?
Test Plan:
stopped and started daemons. error logs look good.
ran bin/storage upgrade. noted that `adjust` added the appropriate indices for active and archive task.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T5402
Differential Revision: https://secure.phabricator.com/D11044
Summary:
Fixes T5196
If no phd.user is configured the behaviour is unchanged besides printing a warning when run as root (Usually i would add an exit(1) here but that would break existing installs who do that).
If phd.user is set and the current user is root it will run the daemon as: su USER -c "command" (I'm not sure if this works for every platform needed)
Otherwise it will refuse to start if configured and current user mismatch.
Test Plan: Stopped & Started phd daemon with various users and different phd.user settings including root
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: vinzent, epriestley
Maniphest Tasks: T5196
Differential Revision: https://secure.phabricator.com/D11036
Summary: database migration + drop old view code. Fixes T5604.
Test Plan: grepped src/ for TYPE_CCS (no hits); viewed some tasks with old cc transactions and noted they still rendered correctly post data conversion
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T5604
Differential Revision: https://secure.phabricator.com/D11015
Summary:
Fixes T6741. This allows Almanac services to be locked from the CLI. Locked services (and their bindings, interfaces and devices) can not be edited. This serves two similar use cases:
- For normal installs, you can protect cluster configuration from an attacker who compromises an account (or generally harden services which are intended to be difficult to edit).
- For Phacility, we can lock externally-managed instance cluster configuration without having to pull any spooky tricks.
Test Plan:
- Locked and unlocked services.
- Verified locking a service locks connected properties, bindings, binding properties, interfaces, devices, and device properties.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6741
Differential Revision: https://secure.phabricator.com/D11006
Summary:
Ref T5833. This allows services to be typed, to distinguish between different kinds of services. This makes a few things easier:
- It's easier for clients to select the services they're interested in (see note in T5873 about Phacility). This isn't a full-power solution, but gets is some of the way there.
- It's easier to set appropriate permissions around when modifications to the Phabricator cluster are allowed. These service nodes need to be demarcated as special in some way no matter what (see T6741). This also defines a new policy for users who are permitted to create services.
- It's easier to browse/review/understand services.
- Future diffs will allow ServiceTypes to specify more service structure (for example, default properties) to make it easier to configure services correctly. Instead of a free-for-all, you'll get a useful list of things that consumers of the service expect to read.
The "custom" service type allows unstructured/freeform services to be created.
Test Plan:
- Created a new service (and hit error cases).
- Edited an existing service.
- Saw service types on list and detail views.
- Poked around new permission stuff.
- Ran `almanac.queryservices` with service class specification.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5833
Differential Revision: https://secure.phabricator.com/D10995
Summary:
Ref T5955. Summary of intended changes:
**Improve Granularity of Authorization**: Currently, users have one Conduit Certificate. This isn't very flexible, and means that you can't ever generate an API token with limited permissions or IP block controls (see T6706). This moves toward a world where you can generate multiple tokens, revoke them individually, and assign disparate privileges to them.
**Standardize Token Management**: This moves Conduit to work the same way that sessions, OAuth authorizations, and temporary tokens already work, instead of being this crazy bizarre mess.
**Make Authentication Faster**: Authentication currently requires a handshake (conduit.connect) to establish a session, like the web UI. This is unnecessary from a security point of view and puts an extra round trip in front of all Conduit activity. Essentially no other API anywhere works like this.
**Make Authentication Simpler**: The handshake is complex, and involves deriving hashes. The session is also complex, and creates issues like T4377. Handshake and session management require different inputs.
**Make Token Management Simpler**: The certificate is this huge long thing right now, which is not necessary from a security perspective. There are separate Arcanist handshake tokens, but they have a different set of issues. We can move forward to a token management world where neither of these problems exist.
**Lower Protocol Barrier**: The simplest possible API client is very complex right now. It should be `curl`. Simplifying authentication is a necessary step toward this.
**Unblock T2783**: T2783 is blocked on nodes in the cluster making authenticated API calls to other nodes. This provides a simpler way forward than the handshake mess (or enormous-hack-mess) which would currently be required.
Test Plan:
- Generated tokens.
- Generated tokens for a bot account.
- Terminated tokens (and for a bot account).
- Terminated all tokens (and for a bot account).
- Ran GC and saw it reap all the expired tokens.
NOTE: These tokens can not actually be used to authenticate yet!
{F249658}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5955
Differential Revision: https://secure.phabricator.com/D10985
Summary:
Ref T2783. This is primarily exploratory and just figuring out what we're blocked on:
- Allow a Repository to be bound to a Service. The Service may eventually define multiple read/write nodes, etc.
- There's no UI to do this binding yet, you have to touch the database manually.
- If a repository is bound to a Service, effect Conduit calls via calls to the remote service instead of executing them in-process.
- These don't actually work yet since there's no authentication (see T5955).
Test Plan:
- Made a nice Service with a nice Binding to a nice Interface on a nice Device.
- Force-associated a repository with the service using a raw MySQL query.
- Saw Phabricator try to make a remote call to the service (on localhost) and fail because of missing auth stuff.
- Also ran `almanac.queryservices`.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2783
Differential Revision: https://secure.phabricator.com/D10982
Summary: Fixes T5604. This should fix some random bugs, lets us move forward more easily, and all that good stuff about killing code debt.
Test Plan:
- Conduit method maniphest.createtask
- verified creating user subscribed
- verified subscription transaction
- Conduit method maniphest.update
- verified subscribers set as specified to ccPHIDs parameter
- verified subscription transaction
- Herald
- verified herald rule to add subscriber worked
- verified no subscribers removed accidentally
- edit controller
- test create and verify author gets added IFF they put themselves in subscribers control box
- test update gets set to exactly what user enters
- lipsum generator'd tasks work
- bulk add subscribers works
- bulk remove subscriber works
- detail controller
- added myself by leaving a comment
- added another user via explicit action
- added another user via implicit mention
- task merge via search attach controller
- mail reply handler
- add subscriber via ./bin/mail receive-test
- unsubscribe via ./bin/mail receive-test
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T5604
Differential Revision: https://secure.phabricator.com/D10965
Summary:
Ref T6615. Mixing ASC and DESC ordering on a multipart key makes it dramatically less effective (or perhaps totally ineffective).
Reverse the meaning of the `priority` column so it goes in the same direction as the `id` column (both ascending, lower values execute sooner).
Test Plan:
- Queued 1.2M tasks with `bin/worker flood`.
- Processed ~1 task/second with `bin/phd debug taskmaster` before patch.
- Applied patch, took ~5 seconds for ~1.2M rows.
- Processed ~100-200 tasks/second with `bin/phd debug taskmaster` after patch.
- "Next in Queue" query on daemon page dropped from 1.5s to <1ms.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: aklapper, 20after4, epriestley
Maniphest Tasks: T6615
Differential Revision: https://secure.phabricator.com/D10895
Summary:
Ref T6240. Some discussion in that task. In instance/cluster environments, daemons need to make Conduit calls that bypass policy checks.
We can't just let anyone add SSH keys with this capability to the web directly, because then an adminstrator could just add a key they own and start signing requests with it, bypassing policy checks.
Add a `bin/almanac trust-key --id <x>` workflow for trusting keys. Only trusted keys can sign requests.
Test Plan:
- Generated a user key.
- Generated a device key.
- Trusted a device key.
- Untrusted a device key.
- Hit the various errors on trust/untrust.
- Tried to edit a trusted key.
{F236010}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6240
Differential Revision: https://secure.phabricator.com/D10878
Summary: Fixes T3189. Now if you say #projects in a commit message they will associate nicely with the commit. Also we record transactions about all this project editing fun.
Test Plan: tested migration by associating some projects with commits and verifying they still showed up post migration. tested adding / removing projects by doing so from the UI, noting transactions written nicely as well
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Projects: #projects
Maniphest Tasks: T3189
Differential Revision: https://secure.phabricator.com/D10877
Summary: Fixes T6152, T6237. This introduces a viewPolicy column to the DifferentialDiff, and re-jiggers the DifferentialDiff policy implementation such that things behave as before once associated with a revision, else use the DifferentialDiff policy column value.
Test Plan: made a diff with a non-standard view policy and noted that policy was still selected in the revision step. arc lint.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6237, T6152
Differential Revision: https://secure.phabricator.com/D10875
Summary: Ref T6237. This sets us up for some future work like T6152, T6200 and generally cleaning up this workflow a bit. Tried to do as little as possible so not exposing transaction view yet. (Though that timeline is going to be a little funky in the common case of just the lone create transaction.)
Test Plan: made a diff from web ui and it worked. made a herald rule to block certain diffs then tried to make such a diff and saw UI letting me know i was blocked
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6237
Differential Revision: https://secure.phabricator.com/D10869
Summary: Fixes T1768. This is mostly a data cleanliness issue as duplicate rows don't really do anything, but let's clear it up now.
Test Plan: made some duplicate rows by adding the same auditor multiple times. ran ./bin/storage upgrade and it worked perfectly!
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T1768
Differential Revision: https://secure.phabricator.com/D10849
Summary: See <https://github.com/phacility/phabricator/issues/760>. We removed these methods in D10832 but still need the migration to be able to do project checks.
Test Plan: Ran on a test wiki with `/`, `/projects/` and `/projects/example/`. The first two pages didn't try to use project policies; the third one did.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D10836
We have at least one project with `null` as a viewPolicy. This should get
sorted out separately, but make the migration robust against it.
Auditors: btrahan
Summary: Ref T4029. this diff makes the pertinent database changes AND adds the migration script. This is important to get the data backend straightened away before we fully ship T4029. Next diff will expose the edit controls for these policies and whatever else work is needed to get that part done right.
Test Plan: made sure the lone project page on my wiki had a project with restrictive view policy. Post migration verified correct policy applied to this lone project page AND most open policy applied to the others
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T4029
Differential Revision: https://secure.phabricator.com/D10814
Summary:
Ref T5833. This fixes a few weird things with this table:
- A bunch of columns were nullable for no reason.
- We stored an MD5 hash of the key (unusual) but never used it and callers were responsible for manually populating it.
- We didn't perform known-key-text lookups by using an index.
Test Plan:
- Ran migrations.
- Faked duplicate keys, saw them clean up correctly.
- Added new keys.
- Generated new keys.
- Used `bin/auth-ssh` and `bin/auth-ssh-key`.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5833
Differential Revision: https://secure.phabricator.com/D10805
Summary: Ref T1191. A couple of installs have hit issues with this table, so clean it up before adjustment adds a unique key to it.
Test Plan: Dropped key, added duplicate rows, ran patch, got cleanup, ran adjust to get the key back.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10799
Summary:
Ref T1191. Use `storage quickstart` to regenerate `quickstart.sql` using modern schema construction statements.
This puts new installs into utf8mb4 mode immediately without requiring storage adjustment.
Test Plan:
- Ran `arc unit --everything`, which uses quickstart.
- Ran `bin/storage upgrade --namespace temp`, to quickstart a new namespace.
- Ran `bin/storage upgrade --namespace temp --disable-utf8mb4`, to quickstart a new namespace without utf8mb4 support.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10797
Summary:
Fixes T6487. Ref T1191. Ref T4029. D10756 introduced, but did not populate, this column. This can cause it to fill with `"\0\0\0..."` after adjustment.
Regardless of the adjustment issue, it's nice to populate this column anyway because there's no fundamental reason an object can't have mail sent about it without being saved first, even though it may not practically be possible in the codebase today.
Test Plan:
- Ran `storage upgrade`, saw the column populate for older documents.
- Forced a couple of keys to bad values (too short or with "\0") and saw the migration fix them.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4029, T1191, T6487
Differential Revision: https://secure.phabricator.com/D10804
Summary: Ref T5833. Since these will no longer be bound specifically to users, bring them to a more central location.
Test Plan:
- Edited SSH keys.
- Ran `bin/ssh-auth` and `bin/ssh-auth-key`.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5833
Differential Revision: https://secure.phabricator.com/D10791
Summary:
Ref T5833. Allow services and devices to be tagged with projects.
(These fluff apply implementations are a good example of the issue discussed in T6403.)
Test Plan: {F229569}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5833
Differential Revision: https://secure.phabricator.com/D10782
Summary:
Ref T5833. Currently, we have an `AlmanacDeviceProperty`, but it doesn't use CustomFields and is specific to devices. Make this more generic:
- Reuse most of the CustomField infrastructure (so we can eventually get easy support for nice editor UIs, etc).
- Make properties more generic so Services, Bindings and Devices can all have them.
The major difference between this implementation and existing CustomField implementations is that all other implementations are application-authoritative: the application code determines what the available list of fields is.
I want Almanac to be a bit more freeform (basically: you can write whatever properties you want, and we'll put nice UIs on them if we have a nice UI available). For example, we might have some sort of "ServiceTemplate" that says "a database binding should usually have the fields 'writable', 'active', 'credential'", which would do things like offer these as options and put a nice UI on them, but you should also be able to write whatever other properties you want and add services without building a specific service template for them.
This involves a little bit of rule bending, but ends up pretty clean. We can adjust CustomField to accommodate this a bit more gracefully later on if it makes sense.
Test Plan: {F229172}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5833
Differential Revision: https://secure.phabricator.com/D10777
Summary:
This implements as little as possible to stick a working transactions + editor codepath in the basic create / edit flow. Aside from the transaction tables, this also required adding a mailKey to a phrictionDocument.
Future work would include adding more transactions types for things like "move" and all the pertinent support. Even future work is to add things like policies which will work easily in the transaction framework. Ref T4029.
Test Plan:
- made a wiki doc
- edit a wiki doc
- had someone subscribe to a wiki doc and edited it
For all three, the edits worked, a reasonable email was sent out, and feed stories were generated.
- made a wiki doc at a /location/like/this
document "stubs" were made as expected in /location and /location/like
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: chad, Korvin, epriestley
Maniphest Tasks: T4029
Differential Revision: https://secure.phabricator.com/D10756
Summary:
Ref T1191. Notable stuff:
- Adds `--disable-utf8mb4` to `bin/storage` to make it easier to test what things will (approximately) do on old MySQL. This isn't 100% perfect but should catch all the major stuff. It basically makes us pretend the server is an old server.
- Require utf8mb4 to dump a quickstart.
- Fix some issues with quickstart generation, notably special casing the FULLTEXT handling.
- Add an `--unsafe` flag to `bin/storage adjust` to let it truncate data to fix schemata.
- Fix some old patches which don't work if the default table charset is utf8mb4.
Test Plan:
- Dumped a quickstart.
- Loaded the quickstart with utf8mb4.
- Loaded the quickstart with `--disable-utf8mb4` (verified that we get binary columns, etc).
- Adjusted schema with `--disable-utf8mb4` (got a long adjustment with binary columns, some truncation stuff with weird edge case test data).
- Adjusted schema with `--disable-utf8mb4 --unsafe` (got truncations and clean adjust).
- Adjusted schema back without `--disable-utf8mb4` (got a long adjustment with utf8mb4 columns, some invalid data on truncated utf8).
- Adjusted schema without `--disable-utf8mb4`, but with `--unsafe` (got truncations on the invalid data).
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10757
Summary: Ref T5833. Allows you to bind a service (like `db.example.com`) to one or more interfaces (for example, to specify a pool with one read/write host and two read-only hosts). You can't configure which hosts have which properties yet, but you can add all the relevant interfaces to the service. Next diff will start supporting service, binding, and device properties like "is writable", "is active", etc., so that Almanac will be able to express operations like "change which database is writable", "disable writes", "bring a device down", etc.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5833
Differential Revision: https://secure.phabricator.com/D10745
Summary: Ref T5833. An interface is an IP (maybe v4, maybe v6) and port on a specified network (public internet, VPN, NAT block, etc).
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5833
Differential Revision: https://secure.phabricator.com/D10718
Summary: Ref T5833. This differentiates address spaces like the public internet from VPNs, so when a service is available at `192.168.0.1`, we'll know it's on some specific NAT block or whatever.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5833
Differential Revision: https://secure.phabricator.com/D10715
Summary: Ref T5833. The "uninteresting" part of this object is virtually identical to AlmanacService.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5833
Differential Revision: https://secure.phabricator.com/D10714
Summary: Ref T5833. See that task for functional goals and some discussion of design.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5833
Differential Revision: https://secure.phabricator.com/D10713
Summary: Ref T2787. When order statuses change, send merchants and users email about it.
Test Plan: Used `bin/mail` to review mail.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D10694
Summary: Ref T2787. I mostly just want these in place so I can glue emails to them, but they're also useful on their own.
Test Plan: {F216515}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D10688
Summary:
Ref T2787. Make this a little more concrete with explicit membership instead of a general edit policy. In particular, we need to know who to email when orders happen, and can't reasonably do that with an edit policy.
I imagine this might eventually get more nuanced (e.g., users who can only approve orders vs users who can manage the merchant itself) but that's a long ways away.
Test Plan: {F216284}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D10681
Summary: Ref T5835. Make fund stories publish to feed and send email.
Test Plan: Made edits, etc., saw them in feed and outbound email.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5835
Differential Revision: https://secure.phabricator.com/D10677
Summary:
Ref T2787. This has some rough edges but basically works.
- Users can cancel orders that are in incomplete states (or in complete states, if the application allows them to -- for example, some future application might allow cancellation of billed-but-not-shipped orders).
- Merchant controllers can partially or fully refund orders from any state after payment.
Test Plan: This is still rough around the edges, but issued Stripe and WePay refunds.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: chad, epriestley
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D10664
Summary:
Ref T2787.
- Allow merchants to disable payment providers.
- Show more useful information about providers on the payments page.
- Make test vs live more clear.
- Show merchant status.
- Add a description to merchants to flesh them out a bit -- the merchant areas of responsibilities seem to be fitting well with accounts, etc.
Test Plan: {F215109}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D10662
Summary:
Ref T2787. Builds on D10649 by rebining existing objects (carts, charges, etc) to merchantPHIDs and providerPHIDs instead of an implicit global merchant and weird global artifacts (providerType / providerKey).
Basically:
- When you create something that users can pay for, you specify a merchant to control where the payment goes.
- Accounts are install-wide, but payment methods are bound to merchants. This seems to do a reasonable job of balancing usability and technical concerns.
- Replace a bunch of weird links between objects with standard PHIDs.
- Improve "add payment method" flow.
Test Plan: Went through the Fund flow with Stripe and WePay, funding an initiative.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D10652
Summary:
Ref T2787. Instead of making providers global configuration, make them a thing on merchants with web configuration.
Payment methods and some of the pyament workflow needs to be retooled a bit after this, but this seemed like a reasonable cutoff point for this diff.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D10649
Summary:
Ref T2787. Currently, you add payment providers (Stripe, Paypal, etc) in global configuration.
Generally, this approach is cumbersome, limiting, and often hard for users to figure out. It also doesn't provide a natural way to segment payment receivers or provide web access to administrative payment functions like issuing refunds, canceling orders, etc. I think that stuff definitely needs to be in the web UI, and the rule for access to it can't reasonably just be "all administrators" in a lot of reasonable cases.
The only real advantage is that it prevents an attacker from adjusting settings and pointing something at an account they control. But this attack can be mitigated through notifications, some sort of CLI-only merchant lock, payment accounts being relatively identifiable, etc.
So introduce "merchants", which are basically payable entities. An individual merchant will have attached Paypal, Stripe, etc., accounts, and access rules. When you buy something in an application, the merchant to pay is also specified. They also provide an umbrella for dealing with permissions down the line.
This may get a //little// cumbersome because if there are several merchants your saved card information is not shared across them. I think that will be fine in the normal case (most installs will have only one merchant). Even if it isn't and we leave providers global, I think introducing this is the right call from a web UI / permissions point of view. I'll play around with it in the next couple of diffs and figure out exactly where the line goes.
Test Plan: Listed, created, edited, viewed merchants.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D10648
Summary: Ref T2787. Similar to D10634, give applications more control over the cart workflow. For now this just means they get to pick exit URIs, but in the future they can manage more details of cart behavior.
Test Plan: Funded an initiative and got returned to the initiative instead of dead-ending in Phortune.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D10638
Summary: Ref T2787. `Product` is currently a fairly heavy object, but as Phortune develops it makes a lot of sense to make it a lighter object and put more product logic in applications. Convert it into a fairly lightweight reference to applications. The idea is that Phortune is mostly providing a cart flow, and applications manage the details of products.
Test Plan: Funded an initiative for $1.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D10634
Summary:
Ref T2787. Phortune currently stores a bunch of stuff as `...inUSDCents`. This ends up being pretty cumbersome and I worry it will create a huge headache down the road (and possibly not that far off if we do Coinbase/Bitcoin soon). Even now, it's more of a pain than I figured it would be.
Instead:
- Provide an application-level serialization mechanism.
- Provide currency serialization.
- Store currency in an abstract way (currently, as "1.23 USD") that can handle currencies in the future.
- Change all `...inUSDCents` to `..asCurrency`.
- This generally simplifies all the application code.
- Also remove some columns which don't make sense or don't make sense anymore. Notably, `Product` is going to get more abstract and mostly be provided by applications.
Test Plan:
- Created a new product.
- Purchased a product.
- Backed an initiative.
- Ran unit tests.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D10633
Summary:
Ref T4209. This creates storage for public keys against authorized hosts, such that servers can be authorized to make Conduit calls as the omnipotent user.
Servers are registered into this system by running the following command once:
```
bin/almanac register
```
NOTE: This doesn't implement authorization between servers, just the storage of public keys.
Placing this against Almanac seemed like the most sensible place, since I'm imagining in future that the `register` command will accept more information (like the hostname of the server so it can be found in the service directory).
Test Plan: Ran `bin/almanac register` and saw the host (and public key information) appear in the database.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4209
Differential Revision: https://secure.phabricator.com/D10400
Summary:
Ref T1191. Although I fixed some of the mutations earlier (in D10598), I missed the column mutations under old versions of MySQL. In particular, this isn't valid:
- `ALTER TABLE ... MODIFY columnName VARCHAR(64) COLLATE binary`
Issue the permitted version of this instead, which is:
- `ALTER TABLE ... MODIFY columnName VARBINARY(64)`
Also fixed an issue where a clean schema had the wrong nullability for a column in the draft table. Force it to the expected nullability.
The other trick here is around the one column with a FULLTEXT index on it, which needs a little massaging.
Test Plan:
- Forced my local install to return `false` for utf8mb4 support.
- Did a clean adjust into `binary` columns.
- Poked around, added emoji to things.
- Reverted the fake check and did a clean adjust into `utf8mb4` columns.
- Emoji survived.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: fabe, epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10627
Summary:
Ref T1191. Now that the whole database is covered, we don't need to do as much work to build expected schemata. Doing them database-by-database was helpful in converting, but is just reudndant work now.
Instead of requiring every application to build its Lisk objects, just build all Lisk objects.
I removed `harbormaster.lisk_counter` because it is unused.
It would be nice to autogenerate edge schemata, too, but that's a little trickier.
Test Plan: Database setup issues are all green.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley, hach-que
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10620
Summary:
Ref T1191. Long ago, Maniphest generated with 40-character mail keys. These prevent the migration to `bytes20`. We had about 300 of these on secure.phabricator.com from several years ago.
Just truncate them. This adjusts reply-to addresses, but it's very likely that none are relevant anymore.
Test Plan: Ran migration on `secure.phabricator.com` to truncate keys.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10615
Summary: Ref T1191. This predates the mdoern patch stuff and may exist on very, very old installs. By the time they apply this patch, it's guaranteed it won't matter anymore. Drop it to make the schemata consistent with expectations.
Test Plan: Ran patch on installs with and without the table.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10611
Summary:
Ref T1191. Currently, the `quickstart.sql` gets generated in a pretty manual fashion. This is a pain, and will become more of a pain in the world of utf8mb4.
Provide a workflow which does upgrade + adjust + dump + destroy, then massages the output to produce a workable `quickstart.sql`.
Test Plan: Inspected output; I'll test this more throughly before actually generating a new quickstart, but that's some ways away.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10603
Summary:
Ref T1191. This destroys surplus columns:
- Pholio's transaction comments have a `mockID` column, but this is not used. The `imageID` column is used instead.
- Phragment has an unused `description` column.
- Releeph has an unused `summary` column.
Test Plan:
- Grepped for usage of these columns.
- Checked that these exist in production, too.
- Ran upgrades.
- Added Pholio inline comments.
- Saw fewer warnings.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley, hach-que
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10591
Summary:
Ref T1191. Notable:
- Drops a very old saved query table. See comments inline: plan was to remove it after a year. It's been ~a year and two weeks.
- This has our only fulltext index. I'm not supporting that formally for now, but left a note.
- This has our only MyISAM table. I'm not supporting that explicitly for now, but it shouldn't affect anything. I may deal with this in the future.
- These tables don't actually write directly via Lisk, so there's some fiddling to get the schemata right.
Test Plan: Down to ~250 warnings. No more surplus databases or tables.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10589
Summary:
Ref T1191.
- Removes ponder comment table. This was migrated a very long time ago.
Test Plan:
- Grepped for removed table.
- Saw ~100 fewer issues in web UI.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10582
Summary:
Ref T1191. Notes:
- Drops the project affiliation table. This is a very old membership table which was migrated to edges.
- Drops the subproject table. This is a very old table for a removed feature.
Test Plan:
- Grepped for dropped tables.
- Saw ~100 fewer setup issues.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10581
Summary:
Ref T1191. Some notes here:
- Drops the old LDAP and OAuth info tables. These were migrated to the ExternalAccount table a very long time ago.
- Separates surplus/missing keys from other types of surplus/missing things. In the long run, my plan is to have only two notice levels:
- Error: something we can't fix (missing database, table, or column; overlong key).
- Warning: something we can fix (surplus anything, missing key, bad column type, bad key columns, bad uniqueness, bad collation or charset).
- For now, retaining three levels is helpful in generating all the expected scheamta.
Test Plan:
- Saw ~200 issues resolve, leaving ~1,300.
- Grepped for removed tables.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10580
Summary:
Ref T1191.
- This drops two tables.
- Both tables were migrated to transactions a very long time ago and no longer have readers or writers.
Test Plan: Saw ~150 fewer warnings.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10576
Summary:
Ref T1191.
- Adds support for custom fields.
- Adds support for partial indexes (indexes on a prefix of a column).
- Drops old auxiliary storage table: this was moved to custom field storage about a year ago.
- Drops old project table: this was moved to edges about two months ago.
Test Plan:
- Viewed web UI, saw fewer issues.
- Used `grep` to verify no readers/writers for storage or project table.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10526
Summary:
Ref T1191.
- There was a varchar(50) column. I changed it to `text64`, since this length is unusual.
- There was an int(3) column. I changed it to `int32`, since this length is unusual.
Test Plan: Ran migrations, saw warnings disappear from config tool.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10524
Summary: Ref T1191. This was migrated to transactions a very long time ago.
Test Plan: Ran migration, grepped, left comments in Slowvote.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10523
Summary:
Ref T1191.
- Fixes T6096. We've migrated away from this table in T4896. The data is now in the transaction table. There have been no reads or writes to this table for some time and I haven't seen any issues from users.
- Fixes T6097. Same deal as above. The data is now in the transaction comment table.
- Fixes T6100. This cache is safe to wipe out, since it's purely read-through. Wiping it will make the migration faster. The column type change fixes storage of PHP serialized objects in a text column.
Test Plan:
- Ran migrations.
- Observed some yellow go blue on the Database Status screen.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6096, T6100, T6097, T1191
Differential Revision: https://secure.phabricator.com/D10520
Summary:
Fixes T5603. Puts the toggling of locking membership into the editor so we get exceptions and all that.
I think the dialogue when you try to leave a project that is locked could be a little better maybe? Right now it just says "You can't leave" and "The membership is locked" more or less; should I surface a link to the policy stuff there too?
Test Plan:
- made a project, toggled the "lock" setting, observed stickiness and good transactions being made
- locked a project and tried to leave as a non-editor - got a dialogue letting me know i couldn't
- locked a project and tried to leave as an editor - left successfully
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5603
Differential Revision: https://secure.phabricator.com/D10508
Summary:
Fixes T6084. Changes:
- Rename `phabricator.show-beta-applications` to `phabricator.show-prototypes`, to reinforce that these include early-development applications.
- Migrate the config setting.
- Add an explicit "no support" banner to the config page.
- Rename "Beta" to "Prototype" in the UI.
- Use "bomb" icon instead of "half star" icon.
- Document prototype applications in more detail.
- Explicitly document that we do not support these applications.
Test Plan:
- Ran migration.
- Resolved "obsolete config" issue.
- Viewed config setting.
- Browsed prototypes in Applications app.
- Viewed documentation.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley, hach-que
Maniphest Tasks: T6084
Differential Revision: https://secure.phabricator.com/D10493
Summary:
Ref T5835. This is still completely made up (no payment integration), but you can "back" an initiative, type a number in the box, and generate a database row. You can then seach for backers and things you've backed and such.
Notable changes:
- Renamed "FundBacking" to "FundBacker". The former name was sort of because you can back things multiple times, but stuff like `$backings` was just too weird.
- I think that's it?
Test Plan:
- Backed an initiative.
- Viewed that I became a backer.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5835
Differential Revision: https://secure.phabricator.com/D10486
Summary:
Ref T5835. This is all pretty boilerplate, and does not interact with Phortune at all yet.
You can create "Initiatives", which have a title and description, and support most of the expected infrastructure (policies, transactions, mentions, edges, appsearch, remakrup, etc).
Only notable decisions:
- Initiatives have an explicit owner. I think it's good to have a single clearly-responsible user behind an initiative.
- I think that's it?
Test Plan:
- Created an initiative.
- Edited an initiative.
- Changed application policy defaults.
- Searched for initiatives.
- Subscribed to an initiative.
- Opened/closed an initiative.
- Used `I123` and `{I123}` in remarkup.
- Destroyed an initiative.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5835
Differential Revision: https://secure.phabricator.com/D10481
Summary: As established in D10122.
Test Plan: I basically ran `arc lint --everything --apply-patches`.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D10437
Summary:
Fixes T6013. Old image macros/memes never had the file edge written.
We also never wrote file edges for audio.
Finally, the meme controller didn't allow public access.
Write edges for images and audio, perform a migration to populate the historic ones, and make the Editor keep them up to date going forward.
Test Plan:
- Updated image, saw new image attach and old image detach.
- Updated audio, saw new audio attach and old audio detach.
- Ran migration.
- Viewed memes as a logged-out user.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6013
Differential Revision: https://secure.phabricator.com/D10411
Summary: Fixes T6006. These didn't get caught by D10392.
Test Plan: Forced migration to re-run; ran SSH commands against Phabricator.
Auditors: btrahan
Summary: Fixes T4881.
Test Plan: made a config change, saw the issue, restarted daemons and it went away
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4881
Differential Revision: https://secure.phabricator.com/D10339
Summary:
Ref T5932. Ref T5936. This implements build generations in Harbormaster, which provides the infrastructure required to both show users the previous states of restarted builds and to allow users to forcefully abort builds (and their targets).
You can view previous generations of a build by adding `?g=<n>` to the URI, but this isn't exposed in the UI anywhere yet.
Test Plan: Ran a build plan with a Sleep step in it. Reconfigured it for various sleep times and viewed previous generations of the build after restarting it.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Maniphest Tasks: T5932, T5936
Differential Revision: https://secure.phabricator.com/D10321
Summary: Resolves T5895. This reduces page load times significantly when looking at builds.
Test Plan: Viewed a build, saw the page load a lot faster.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Maniphest Tasks: T5895
Differential Revision: https://secure.phabricator.com/D10286
Summary: Ref T5884. We migrated with "canCDN" and then had live writes with "cancdn". Move everything to "canCDN" for consistency.
Test Plan: Ran migration, verified DB only has "canCDN" afterward.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5884
Differential Revision: https://secure.phabricator.com/D10273
Summary:
Fixes T2605.
- Add a setup warning about the stopword file.
- Provide a simpler stopword file.
Test Plan:
- Hit setup warning.
- Resolved it according to instructions.
- Added "various" to a task, then searched for it, found the task.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2605
Differential Revision: https://secure.phabricator.com/D10258
Summary: Ref T5819. Implements basic icon and color filtering for projects.
Test Plan: {F189350}
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5819
Differential Revision: https://secure.phabricator.com/D10230
Summary:
Ref T1049. This keeps track of how long a build target takes to execute in Harbormaster and displays it in the build view page. I'm not sure whether "Started" is really that useful once the target has completed?
Also, I change the name of the time taken depending on whether or not the target has completed; if it's still in progress it's called "Elapsed" and if it's completed then it's "Duration". The primary reason for this is that "Duration" sounds like post tense, whereas "Elapsed" is current tense. I'm not sure whether this is okay or not?
Test Plan: Ran a Sleep build step and saw the target dates / times appear correctly.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: talshiri, epriestley, Korvin
Maniphest Tasks: T5824, T1049
Differential Revision: https://secure.phabricator.com/D10174
Summary:
Fixes T5840. Some time ago I incorrectly believed that `latin1_bin` collation was synonymous with "binary". It is not, and does not permit UTF8 characters outside of BMP, among other sequences.
These two tables currently have `LONGTEXT` columns which should be `LONGBLOB`. The table design is explicilty intended to accommodate invalid/unreasonably long ref names, but the collation prevents this from working properly.
After T1191, we'll have a general system for resolving this, but a user hit an issue yesterday (T5840) with a brnach name containing Chinese characters.
Test Plan:
- Tried emoji inserts into both tables, was rebuffed.
- Ran migration.
- Performed emoji inserts into both tables.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5840
Differential Revision: https://secure.phabricator.com/D10217
Summary:
Fixes T5677.
- Instead of using `sequence == 0` to mean "this is the backlog column", flag the column explicitly.
- Migrate existing sequence 0 columns to have the flag.
- Add the flag when initializing or copying a board.
- Remove special backlog logic when reordering columns.
Test Plan:
- Migrated columns, viewed some boards, they looked identical.
- Reordered the backlog column a bunch of times (first, last, middle, dragged other stuff around).
- Added tasks to a project, saw them show up in the reordered backlog.
- Initialized a new board and saw a backlog column show up.
- Copied an existing board and saw the backlog column come over.
- Tried to hide a backlog column.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5677
Differential Revision: https://secure.phabricator.com/D10189
Summary:
Fixes T5476. Using edges to store which objects are on which board columns ends up being pretty awkward. In particular, it makes T4807 very difficult to implement.
Introduce a dedicated `BoardColumnPosition` storage.
This doesn't affect ordering rules (T4807) yet: boards are still arranged by priority. We just read which tasks are on which columns out of a new table.
Test Plan:
- Migrated data, then viewed some boards. Saw exactly the same data.
- Dragged tasks from column to column.
- Created a task directly into a column.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5476
Differential Revision: https://secure.phabricator.com/D10160
Summary:
Ref T4896. Currently, subscriptions to commits are stored as auditors with a special "CC" type.
Instead, use normal subscriptions storage, reads and writes.
Test Plan:
- Ran migration and verified data still looked good.
- Viewed commits in UI and saw "subscribers".
- Saw "Automatically Subscribed", clicked Subscribe/Unsubscribe on a non-authored commit, saw subscriptions update.
- Pushed a commit through Herald rules and saw them trigger subscriptions and auditors.
- Used "Add CCs".
- Added CCs with mentions.
Reviewers: btrahan, joshuaspence
Reviewed By: btrahan, joshuaspence
Subscribers: epriestley
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10103
Summary:
Ref T1049. This uses tabs on build targets to hide the configuration details and variables by default, instead promoting the target name, it's status and a description of the build step. The description is a new field on each build step.
The primary advantage of having a description on build steps is that DevOps can configure appropriate description information (including any troubleshooting information for build failures) on build steps, and developers who have builds fail against their code review can then look at this information.
Test Plan: Viewed a build plan and saw the appropriate information.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D10093
Summary:
Depends on D9806. This implements the build simulator, which is used to calculate the order of build steps in the plan editor. This includes a migration script to convert existing plans from sequential based to dependency based, and then drops the sequence column.
Because build plans are now dependency based, the grippable and re-order behaviour has been removed.
Test Plan: Tested the migration, saw the dependencies appear correctly.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9847
Summary:
Ref T4896. Depends on D10052. This is the major/scary migration, but not really so bad. It is substantially similar to D8210, but less complex because there are fewer actions here.
This moves `PhabricatorAuditComment` storage to `PhabricatorAuditTransaction`, then reads `PhabricatorAuditComment`s as a proxy around the new objects.
Test Plan:
- Before migrating, browsed around. Nothing appeared broken.
- Migrated cleanly.
- Viewed old transactions (inlines, comments, accept/reject/etc, add auditors, add ccs, implicit CCs).
- Added all of those comment types.
- Edited a draft.
- Deleted a draft.
- Spot checked the database for sanity.
Reviewers: btrahan, joshuaspence
Reviewed By: joshuaspence
Subscribers: epriestley
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10055
Summary:
Ref T4896. This is substantially similar to D8196.
Migrate the comment text out of the `audit_comment` table and into the `audit_transaction_comment` table. Do double reads on `PhabricatorAuditComment` so the APIs aren't disturbed. The old table is still updated.
Test Plan:
- Before applying migration, cleared cache and browsed around. Things looked fine, except no comment text.
- Applied migration.
- Cleared cache, browsed around, saw all my old comments.
- Added some new comments.
- Spot checked migrated and new rows in database.
Reviewers: btrahan, joshuaspence
Reviewed By: joshuaspence
Subscribers: epriestley
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10020
Summary:
Ref T4896. This is substantially identical to the process which Differential followed, and mostly copied from the original Differential migration and the Differential proxy object.
Basically, we move all the data over but the application can't tell, and the same APIs do reads and writes to the new table.
Test Plan:
- Browsed UI before migrating, everything looked fine (but no inlines).
- Ran migration.
- Verified draft and published comments survived migration.
- Added a draft.
- Previewed draft.
- Submitted draft.
- Viewed standalone with drafts and published comments.
- Sanity checked data in database, didn't see anything unusual.
Reviewers: btrahan, joshuaspence
Reviewed By: joshuaspence
Subscribers: epriestley
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10018
Summary:
Ref T4896. This adds the new storage, without any code changes.
This storage is substantially identical to the Differential storage, except that `changesetID` has been replaced by `pathID`.
I've retained the properties intended to be used to implement T1460. They might not be quite right, but at least we'll be able to make any fixes consistently to both applications. For now, these fields are empty and ignored.
Test Plan: Ran `./bin/storage upgrade`. Nothing calls this code yet.
Reviewers: btrahan, joshuaspence
Reviewed By: joshuaspence
Subscribers: epriestley
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10017
Summary: Ref T5655. Rename `PhabricatorPHIDType` subclasses for clarity (see discussion in D9839). I'm not too keen on some of the resulting class names, so feel free to suggest alternatives.
Test Plan: Ran unit tests.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin, hach-que
Maniphest Tasks: T5655
Differential Revision: https://secure.phabricator.com/D9986
Summary:
Ref T2787. Carts need a status so we can tell if they've been purchased. Also kind of get WePay working as a one-time provider, and let charges not have a methodPHID (they won't for one-time providers).
All the status stuff is still super crazy rough and you can do things like start a checkout, add a bunch of stuff to your cart, complete the checkout, and have Phabricator think you paid for all the stuff you added. But this is fine for now since you can't actually edit carts, and also none of this is at all usable anyway. I'll refine some of the workflows in future diffs, for now I'm just getting things hooked up and technically working.
Test Plan:
- Purcahsed a cart and got a sort of status/done screen instead of a "your money is gone" exception.
- Went through the WePay flow and got a successful test checkout.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D10003
Summary: Ref T2787. Makes charges a real object, allows providers to apply them. We are now (just barely) capable of stealing users' money.
Test Plan: {F179584}
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D10002
Summary:
Ref T2787. Make carts and purchases real objects, with storage, that kind-of work.
Roughly, the idea here is that applications create "purchases" (like "1 large t-shirt") and add them to "carts" (a user can have a lot of different carts at the same time), then hand things off to Phortune to deal with actualy charging a card. Roughly this works like Paypal or other similar systems do, except Phortune is the thing the user gets handed off to.
This doesn't do anything interesting/useful yet.
Also fix some bugs and update some UI.
Test Plan: Added a product to a cart, saw it in cart screen.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D10001
Summary: The old class name isn't quite correct.
I'm just updating the migration rather than adding a new one to fix it since
this was very recently introduced and affects only installs using Asana auth,
so it's realistic that the number of affected installs might be 0.
Affected installs can use `--apply` to safely rerun the migration.
Auditors: joshuaspence
Summary: Add a missing migration which should have been included in D9982. Harbormaster and Herald PHIDs are used as actors in some transactions.
Test Plan: Ran `./bin/storage upgrade`. Saw a transaction render correctly as "Herald assigned this task to alincoln" instead of "Unknown Object (Application) assigned this task to alincoln".
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D10028
Summary: Ref T5655. Some discussion in D9839. Generally speaking, `Phabricator{$name}Application` is clearer than `PhabricatorApplication{$name}`.
Test Plan:
# Pinned and uninstalled some applications.
# Applied patch and performed migrations.
# Verified that the pinned applications were still pinned and that the uninstalled applications were still uninstalled.
# Performed a sanity check on the database contents.
Reviewers: btrahan, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: hach-que, epriestley, Korvin
Maniphest Tasks: T5655
Differential Revision: https://secure.phabricator.com/D9982
Summary: This migration script is required for D9999, which has already landed.
Test Plan: Ran `./bin/storage upgrade` and can log in again.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D10010
