Summary: Ref T13410. Fixes T4280. Allows you to put a named anchor into a document explicitly.
Test Plan: Used `{anchor ...}` in Remarkup, used location bar to jump to anchors.
Maniphest Tasks: T13410, T4280
Differential Revision: https://secure.phabricator.com/D20825
Summary:
Depends on D20820. Ref T13410. We currently cut anchor names in the middle, don't support emoji in anchors, and generate relatively short anchors.
Generate slightly longer anchors, allow more unicode, and try not to cut things in the middle.
Test Plan: Created a document with a variety of different anchors and saw them generate more usable names.
Maniphest Tasks: T13410
Differential Revision: https://secure.phabricator.com/D20821
Summary:
Ref T13410. We currently generate some less-than-ideal anchors in remarkup, but it's hard to change the algorithm without breaking stuff.
To mitigate this, allow `#xyz` to match any target on the page which begins with `xyz`. This means we can make anchors longer with no damage, and savvy users are free to shorten anchors to produce more presentation-friendly links.
Test Plan: Browsed to `#header-th`, was scrolled to `#header-three`, etc.
Maniphest Tasks: T13410
Differential Revision: https://secure.phabricator.com/D20820
Summary: Fixes T13423. The "Query" class for conduit call logs is missing a "withIDs()" method.
Test Plan: Paged through Conduit call logs.
Maniphest Tasks: T13423
Differential Revision: https://secure.phabricator.com/D20823
Summary: Ref T13279. Facts is still fairly rough, but not broken/policy-violating, so it can be unprototyped to fix the issue where Maniphest reports (which are now driven by Facts) don't work if prototypes are disabled.
Test Plan: Viewed Maniphest reports and Project reports with prototypes on/off and Fact installed/uninstalled.
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20822
Summary:
Depends on D20818. Ref T13279. The behavior of the "burndown" chart has wandered fairly far afield; make it look more like a burndown.
Move the other thing into an "Activity" chart.
Test Plan: {F6865207}
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20819
Summary:
Ref T13279. Allow engines to choose how areas in a stacked area chart stack on top of one another.
This could also be accomplished by using multiple stacked area datasets, but datasets would still need to know if they're stacking "up" or "down" so it's probably about the same at the end of the day.
Test Plan: {F6865165}
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20818
Summary: Ref T13279. Fix some tabular stuff, draw areas better, make the "compose()" API more consistent, unfatal the demo chart, unfatal the project burndown, make the project chart do something roughly physical.
Test Plan: Looked at charts, saw fewer obvious horrors.
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20817
Summary: Depends on D20815. Ref T13279. Give datapoints "refs", which allow us to figure out where particular datapoints came from even after the point is transformed by functions. For now, show the raw points in a table below the chart.
Test Plan: Viewed chart data, saw reasonable-looking numbers.
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20816
Summary:
Depends on D20814. Currently, "min()" and "max()" are still "min(f, n)". This is no longer consistent with the construction of functions a function-generators that are composed at top level.
Turn them into "min(n)" and "max(n)" (i.e., not higher-order functions).
Then, mark all the functions which are pure mathematical functions and not higher-order as "pure". These functions have no function parameters and do not reference external data. For now, this distinction has no immediate implications, but it will simplify the next change (which tracks where data came from when it originated from an external source -- these pure functions never have any source information, since they only apply pure mathematical transformations to data).
Test Plan: Loaded a burnup chart, nothing seemed obviously broken.
Subscribers: yelirekim
Differential Revision: https://secure.phabricator.com/D20815
Summary: Ref T13279. We currently draw a point on the chart for each datapoint, but this leads to many overlapping circles. Instead, aggregate the raw points into display points ("events") at the end.
Test Plan: Viewed a stacked area chart with many points, saw a more palatable number of drawn dots.
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20814
Summary: This psueudocode should use the result of computation at the end.
Test Plan: Read carefully.
Differential Revision: https://secure.phabricator.com/D20813
Summary:
Ref T13413. In Chrome 77, workboard cards with titles that must break in the middle of words cause the browser to completely lock up.
Work around the major known instance of this by overriding the "break-word" behavior. This gives us worse rendering for tasks with very long "words" in their titles (they are truncated instead of broken) but fixes the freezing.
Once Chrome is fixed, this can be reverted.
Test Plan:
- Created a task named "MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM" on a workboard.
- Loaded the board in Chrome 77.
- Before: entire page locks up.
- After: smooth sailing, except the "MMMMMM..." is truncated.
Maniphest Tasks: T13413
Differential Revision: https://secure.phabricator.com/D20812
Summary: Ref T13411. This is a leftover from recent policy rendering changes.
Test Plan: Viewed feed with application policy stories, no more fatal.
Maniphest Tasks: T13411
Differential Revision: https://secure.phabricator.com/D20811
Summary:
Fixes T13415. Provide a way for subtypes to customize the behavior of "Change Subtype" actions that appear above comment areas.
Subtypes may disable this action by specifying `"mutations": []`, or provide a list of subtypes.
The bulk editor and API can still perform any change.
Test Plan:
- Tried to define an invalid "mutations" list with a bad subtype, got a sensible error.
- Specified a limited mutations list and an empty mutations list, verified that corresponding tasks got corresponding actions.
- Used the bulk editor to perform a freeform mutation.
- Verified that tasks of a subtype with no "mutations" still work the same way they used to (allow mutation into any subtype).
Maniphest Tasks: T13415
Differential Revision: https://secure.phabricator.com/D20810
Summary: See PHI1434. For objects that support subtypes and have subtypes configured, allow Herald rules to act on subtypes.
Test Plan:
- Configured task and project subtypes, wrote Herald rules, saw "Subtypes" as an option, saw appropriate typeahead values and detail page rendering.
- Unconfigured project subtypes, saw field vanish from UI for new rules.
- Wrote a "subtype"-depenent rule that added a comment, interacted with tasks of that subtype and a different subtype. Saw Herald act only on tasks with the correct subtype.
Differential Revision: https://secure.phabricator.com/D20809
Summary:
Fixes T7961. Currently, we present Herald users with actions like "Require legalpad signatures" and "Run build plans" even if Legalpad and Harbormaster are not installed.
Instead, allow fields and actions to be made "unavailable", which means that we won't present them as options when adding to new or existing rules.
If you edit a rule which already uses one of these fields or actions, it isn't affected.
Test Plan:
- Created a rule with a legalpad action, uninstalled legalpad, edited the rule. Action remained untouched.
- Created a new rule, wasn't offered the legalpad action.
- Reinstalled the application, saw the action again.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T7961
Differential Revision: https://secure.phabricator.com/D20808
Summary:
Fixes T13411. This looks like the last case where you hit a policy explanation and have permission to see the policy, but we don't currently show you the policy rules.
This implementation is slightly clumsy, but likely harmless.
Test Plan: {F6856421}
Maniphest Tasks: T13411
Differential Revision: https://secure.phabricator.com/D20807
Summary:
Ref T13411. Currently, if you hit a policy exception because you can't view an object, we disclose details about the view policy of the object, particularly which project's members can see the object for project policies.
Although there's a large amount of grey area here, this feels like a more substantial disclosure than we offer in other contexts. Instead, if you encounter a policy exception while testing "CAN_VIEW" or don't have "CAN_VIEW", present an "opaque" explanation which omits details that viewers who can't view the object shouldn't have access to. Today, this is the name of "Project" policies (and, implicitly, the rulesets of custom policies, which we now disclose in other similar contexts).
Test Plan:
- Hit policy exceptions for "CAN_VIEW" on an object with a project view policy, saw an opaque explanation.
- Hit policy exceptions for "CAN_EDIT" on an object with a project edit policy and a view policy I satisfied, saw a more detailed explanation.
Maniphest Tasks: T13411
Differential Revision: https://secure.phabricator.com/D20806
Summary: Ref T13411. When users click a link to explain a capability (like the policy header on many objects, or the link next to specific capabilities in "Applications", "Diffusion", etc), inline the full ruleset for the custom policy into the dialog if the object has a custom policy.
Test Plan: {F6856365}
Maniphest Tasks: T13411
Differential Revision: https://secure.phabricator.com/D20805
Summary:
Ref T13411. This cleans up policy name rendering. We ultimately render into three contexts:
- Plain text contexts, like `bin/policy show`.
- Transaction contexts, where we're showing a policy change. In these cases, we link some policies (like project policies and custom policies) but the links go directly to the relevant object or a minimal explanation of the change. We don't link policies like "All Users".
- Capability contexts, where we're describing a capability, like "Can Push" or cases in Applicaitons. In these cases, we link all policies to the full policy explanation flow.
Test Plan:
- Used `bin/policy show` to examine the policy of an object with a project policy, no longer saw HTML.
- Viewed the transaction logs of Applications (ModularTransactions) and Tasks (not ModularTransactions) with policy edits, including project and custom policies.
- Clicked "Custom Policy" in both logs, got consistent dialogs.
- Viewed application detail pages, saw all capabities linked to explanatory capability dialogs. The value of having this dialog is that the user can get a full explanation of special rules even if the policy is something mundane like "All Users".
Maniphest Tasks: T13411
Differential Revision: https://secure.phabricator.com/D20804
Summary: Ref T13411. This pathway has an unused "icon" parameter with no callsites. Throw it away to ease refactoring.
Test Plan: Grepped for callsites, found none using this parameter.
Maniphest Tasks: T13411
Differential Revision: https://secure.phabricator.com/D20803
Summary:
Ref T13411. These three applications render an "Editable By: <policy>" field in their descriptions.
The pages that these appear on all have "Edit <thing>" actions which either tell you the policy or allow you to discover the policy, and this field is unusual (the vast majority of objects don't have it). I think it largely got copy/pasted or used as space-filler and doesn't offer much of value.
Remove it to simplify/standardize these pages and make changes to how this field works simpler to implement.
Test Plan: Viewed a Credential, Blog, and Space; no longer saw the "Editable By" field.
Maniphest Tasks: T13411
Differential Revision: https://secure.phabricator.com/D20802
Summary:
Ref T13411. Since circa D19829, transactions have rendered policy changes in a modern way, notably making "Custom Policy" clickable to show the policy rules.
Edit transactions in Applications still use a separate, older approach to render policies. This produces policy renderings which don't use modern quoting rules and don't link in a modern way.
Make Applications use the same rendering code that other transactions (like normal edit/view edits) use.
Test Plan: Edited policies in Applications, saw more useful transactions in the log. Clicked "Custom Policy" in the transaction log and got a useful explanation of the policy.
Maniphest Tasks: T13411
Differential Revision: https://secure.phabricator.com/D20801
Summary:
Ref T13410. See PHI1431. Currently, when you move a document in Phriction, the target shows a "This document was moved from ..." banner until it is edited.
This banner isn't particularly useful, and it's distracting and it isn't obvious how to dismiss it, and making a trivial edit to dismiss it is awkward.
This information is also already available in the transaction log.
Just remove this banner since it doesn't really serve any clear purpose.
Test Plan:
- Moved a page in Phriction, then loaded the destination page. Before change: header banner. After change: nothing.
- Viewed a normal (non-moved) page, saw normal behavior.
- Reviewed transactions, saw "Moved from ..." in the timeline.
Maniphest Tasks: T13410
Differential Revision: https://secure.phabricator.com/D20800
Summary:
Fixes T8808. Currently, all project use the default ("Briefcase") project icon when they appear in a policy dropdown.
Since project policies are separated out into a "Members of Projects" section of the dropdown anyway, there is no reason not to use the actual project icon, which is often more clear.
Test Plan: {F6849927}
Maniphest Tasks: T8808
Differential Revision: https://secure.phabricator.com/D20799
Summary:
Fixes T9136.
- Fix a bug where the name is rendered improperly.
- Put disabled rules at the bottom.
- Always show the rule monogram so you can distingiush between rules with the same name.
Test Plan: {F6849915}
Maniphest Tasks: T9136
Differential Revision: https://secure.phabricator.com/D20798
Summary:
Fixes T8952. These feed stories are not interesting and tend to be generated as collateral damage when a non-story update is made to an old task and someone has a "subscribe me" Herald rule.
Also clean up some of the Herald field/condition indexing behavior slightly.
Test Plan: Wrote a "Subscribe X" herald rule, made a trivial update to a task. Before: low-value feed story; after: no feed story.
Maniphest Tasks: T8952
Differential Revision: https://secure.phabricator.com/D20797
Summary: Fixes T13409. This is a companion to the existing "Mark with flag" rule.
Test Plan: Used a "remove flag" rule on an object with no flag (not removed), the right type of flag (removed), and a different type of flag (not removed).
Maniphest Tasks: T13409
Differential Revision: https://secure.phabricator.com/D20796
Summary:
Fixes T13408. Currently, when a package (or other object) appears in a field (rather than an action), it is not indexed.
Instead: index fields too, not just actions.
Test Plan:
- Wrote a rule like "[ Affected packages include ] ...".
- Updated the search index.
- Saw rule appear on "Affected By Herald Rules" on the package detail page.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13408
Differential Revision: https://secure.phabricator.com/D20795
Summary: Fixes T13412. If you search for "https://phabricator.example.com" with no trailing slash, we currently redirect you to "", which is fouled by a safety check in the redirection flow.
Test Plan:
- Searched for "https://local.phacility.com"; before: fatal in redirection; after: clean redirect.
- Searched for other self-URIs, got normal redirects.
Maniphest Tasks: T13412
Differential Revision: https://secure.phabricator.com/D20794
Summary: Fixes T13405. We currently offer non-global custom saved queries here, but this doesn't make sense as a global default setting.
Test Plan: Saved a global search query, edited global search settings, no longer saw the non-global query as an option.
Maniphest Tasks: T13405
Differential Revision: https://secure.phabricator.com/D20793
Summary: Ref T13405. Some pages don't have a contextual application.
Test Plan: Viewed 404 page, no more fatal.
Maniphest Tasks: T13405
Differential Revision: https://secure.phabricator.com/D20792
Summary:
Ref T13404. Except for one known issue in Multimeter, Phabricator appears to function properly in this mode. It is broadly desirable that we run in this mode; it's good on its own, and enabled by default in at least some recent MySQL.
Additionally, "ONLY_FULL_GROUP_BY" and "STRICT_ALL_TABLES" shared a setup key, so ignoring one would ignore both. Change the key so that existing ignores on "ONLY_FULL_GROUP_BY" do not mask "STRICT_ALL_TABLES" warnings.
Test Plan: Grepped for `ONLY_FULL_GROUP_BY`.
Maniphest Tasks: T13404
Differential Revision: https://secure.phabricator.com/D20791
Summary: Ref T13404. Enabling "STRICT_ALL_TABLES" is good, but if you don't want to bother it doesn't matter too much. All upstream development has been on "STRICT_ALL_TABLES" for a long time.
Test Plan: {F6847839}
Maniphest Tasks: T13404
Differential Revision: https://secure.phabricator.com/D20790
Summary: Fixes T13406. On the logout screen, test for no configured providers and warn users they may be getting into more trouble than they expect.
Test Plan:
- Logged out of a normal install and a fresh (unconfigured) install.
{F6847659}
Maniphest Tasks: T13406
Differential Revision: https://secure.phabricator.com/D20789
Summary:
See D20779, https://discourse.phabricator-community.org/t/3089. `bin/config set` complains about
missing config file as if it's un-writable.
Test Plan: run `bin/config set` with missing, writable, unwritable conf.json and parent dir.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D20788
Summary: Fixes T13405. The default behavior of the global search bar isn't currently configurable, but can be made configurable fairly easily.
Test Plan: Changed setting as an administrator, saw setting reflected as a user with no previous preference. As a user with an existing preference, saw preference retained.
Maniphest Tasks: T13405
Differential Revision: https://secure.phabricator.com/D20787
Summary:
Fixes T13392. If you have 17 load balancers in sequence, Phabricator will receive requests with at least 17 "X-Forwarded-For" components in the header.
We want to select the 17th-from-last element, since prior elements are not trustworthy.
This currently isn't very easy/obvious, and you have to add a kind of sketchy piece of custom code to `preamble.php` to do any "X-Forwarded-For" parsing. Make handling this correctly easier.
Test Plan:
- Ran unit tests.
- Configured my local `preamble.php` to call `preamble_trust_x_forwarded_for_header(4)`, then made `/debug/` dump the header and the final value of `REMOTE_ADDR`.
```
$ curl http://local.phacility.com/debug/
<pre>
HTTP_X_FORWARDED_FOR =
FINAL REMOTE_ADDR = 127.0.0.1
</pre>
```
```
$ curl -H 'X-Forwarded-For: 1.1.1.1, 2.2.2.2, 3.3.3.3, 4.4.4.4, 5.5.5.5, 6.6.6.6' http://local.phacility.com/debug/
<pre>
HTTP_X_FORWARDED_FOR = 1.1.1.1, 2.2.2.2, 3.3.3.3, 4.4.4.4, 5.5.5.5, 6.6.6.6
FINAL REMOTE_ADDR = 3.3.3.3
</pre>
```
```
$ curl -H 'X-Forwarded-For: 5.5.5.5, 6.6.6.6' http://local.phacility.com/debug/
<pre>
HTTP_X_FORWARDED_FOR = 5.5.5.5, 6.6.6.6
FINAL REMOTE_ADDR = 5.5.5.5
</pre>
```
Maniphest Tasks: T13392
Differential Revision: https://secure.phabricator.com/D20785
Summary:
Ref T13336. Currently, "bin/storage destroy" destroys every master. This is wonderfully destructive, but if replication fails it's useful to be able to destroy only a replica.
Operate on a single host, and require "--host" to target the operation in cluster mode, so `bin/storage destroy --host dbreplica001` is a useful operation.
Test Plan: Ran `bin/storage destroy` with various flags locally. Will destroy `secure002` and refresh replication.
Maniphest Tasks: T13336
Differential Revision: https://secure.phabricator.com/D20784
Summary: Ref T13366. The "authorities" mechanism was replaced, but I missed this callsite. Update it to use the request cache mechanism.
Test Plan: As a user without permission to view some initiatives, viewed a list of initiatives.
Maniphest Tasks: T13366
Differential Revision: https://secure.phabricator.com/D20783
Summary: Ref T13404. This query is invalid under "sql_mode=ONLY_FULL_GROUP_BY". Rewrite it to avoid interacting with `actorIdentity` at all; this is a little more robust in the presence of weird data and not really more complicated.
Test Plan:
- Enabled "ONLY_FULL_GROUP_BY".
- Hit system actions (e.g., login).
- Before: error.
- After: clean login.
- Tried to login with a bad password many times in a row, got properly limited by the system action rate limiter.
Maniphest Tasks: T13404
Differential Revision: https://secure.phabricator.com/D20782
Summary:
Depends on D20780. Ref T13403. During initial setup, it's routine to run "bin/config" with a bad database config. We start the stack in "config optional" mode to anticipate this.
However, even in this mode, we may emit warnings if the connection fails in certain ways. These warnings aren't useful; suppress them with "@".
(Possibly this message should move from "phlog()" to "--trace" at some point, but it has a certain amount of context/history around it.)
Test Plan:
- Configured MySQL to fail with a retryable error, e.g. good host but bad port.
- Ran `bin/config set ...`.
- Before: saw retry warnings on stderr.
- After: no retry warnings on stderr.
- (Turned off suppression code artificially and verified warnings still appear under normal startup.)
Maniphest Tasks: T13403
Differential Revision: https://secure.phabricator.com/D20781
Summary: Depends on D20779. Ref T13403. Bad parameters may cause this call to fail without setting an error code; if it does, catch the issue and go down the normal connection error pathway.
Test Plan:
- With "mysql.port" set to "quack", ran `bin/storage probe`.
- Before: wild mess of warnings as the code continued below and failed when trying to interact with the connection.
- After: clean connection failure with a useful error message.
Maniphest Tasks: T13403
Differential Revision: https://secure.phabricator.com/D20780
Summary: Ref T13403. We currently emit a useful error message, but it's not tailored and has a stack trace. Since this is a relatively routine error and on the first-time-setup path, tailor it so it's a bit nicer.
Test Plan:
- Ran `bin/config set ...` with an unwritable "local.json".
- Ran `bin/config set ...` normally.
Maniphest Tasks: T13403
Differential Revision: https://secure.phabricator.com/D20779
Summary:
Ref T13286. The current (very safe / conservative) rules for retrying git reads generalize to git writes, so we can use the same ruleset in both cases.
Normally, writes converge rapidly to only having good nodes at the head of the list, so this has less impact than the similar change to reads, but it generally improves consistency and allows us to assert that writes which can be served will be served.
Test Plan:
- In a cluster with an up node and a down node, pushed changes.
- Saw a push to the down node fail, retry, and succeed.
- Did some pulls, saw appropriate retries and success.
- Note that once one write goes through, the node which received the write always ends up at the head of the writable list, so nodes need to be explicitly thawed to reproduce the failure/retry behavior.
Maniphest Tasks: T13286
Differential Revision: https://secure.phabricator.com/D20778
Summary: Ref T13286. When retrying a read request, keep retrying as long as we have canididate services. Since we consume a service with each attempt, there's no real reason to abort early, and trying every service allows reads to always succeed even if (for example) 8 nodes of a 16-node cluster are dead because of a severed network link between datacenters.
Test Plan: Ran `git pull` in a clustered repository with an up node and a down node; saw retry count dynamically adjust to available node count.
Maniphest Tasks: T13286
Differential Revision: https://secure.phabricator.com/D20777
Summary:
Depends on D20775. Ref T13286. When a Git read request fails against a cluster and there are other nodes we could safely try, try more nodes.
We DO NOT retry the request if:
- the client read anything;
- the client wrote anything;
- or we've already retried several times.
Although //some// requests where bytes went over the wire in either direction may be safe to retry, they're rare in practice under Git, and we'd need to puzzle out what state we can safely emit.
Since most types of failure result in an outright connection failure and this catches all of them, it's likely to almost always be sufficient in practice.
Test Plan:
- Started a cluster with one up node and one down node, pulled it.
- Half the time, hit the up node and got a clean pull.
- Half the time, hit the down node and got a connection failure followed by a retry and a clean pull.
- Forced `$err = 1` so even successful attempts would retry.
- On hitting the up node, got a "failure" and a decline to retry (bytes already written).
- On hitting the down node, got a failure and a real retry.
- (Note that, in both cases, "git pull" exits "0" after the valid wire transaction takes place, even though the remote exited non-zero. If the server gave Git everything it asked for, it doesn't seem to care if the server then exited with an error code.)
Maniphest Tasks: T13286
Differential Revision: https://secure.phabricator.com/D20776
Summary:
Ref T13286. To support request retries, allow the service lookup method to return an ordered list of structured service references.
Existing callsites continue to immediately discard all but the first reference and pull a URI out of it.
Test Plan: Ran `git pull` in a clustered repository with an "up" node and a "down" node, saw 50% serivce failures and 50% clean pulls.
Maniphest Tasks: T13286
Differential Revision: https://secure.phabricator.com/D20775
