Summary: After D4034 there are no AphrontSideNavView callsites outside of AphrontSideNavFilterView.
Test Plan: Looked at about a million side navs.
Reviewers: chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T1960
Differential Revision: https://secure.phabricator.com/D4035
Summary: See D3977, a terrible diff where I made a huge messs.
Test Plan: Ran `reparse.php --message --trace <revision>`, verified correct identification of author.
Reviewers: edward, vrana
Reviewed By: edward
CC: aran
Differential Revision: https://secure.phabricator.com/D4104
Summary:
assume at least 360px for a given code pane. that's about when the comment box starts fighting back anyway. we'll use the yet-to-be-built one page render for the narrow viewport cases.
This address the cases as laid out in T2005. It fails the "MMMMM" case pretty horribly. However, if there is a space it works just fine and presumably folks are stretching out their windows on big glorious monitors at 160 characters wide or whatever.
Re-factored things just a tad but figure I'll take a nice big chunk of "renderer" to move forward T2009
Test Plan: looked at all sorts of funky diffs
Reviewers: epriestley
Reviewed By: epriestley
CC: chad, aran, Korvin
Maniphest Tasks: T2005
Differential Revision: https://secure.phabricator.com/D4083
Summary: See discussion in T1544. This has been obsoleted by simpler/better mechanisms.
Test Plan: Edited a repository; ran a parse task.
Reviewers: edward
Reviewed By: edward
CC: aran
Maniphest Tasks: T1544
Differential Revision: https://secure.phabricator.com/D3977
Summary: This is missing a lot of features, but technically allows working copy allocation.
Test Plan: Ran `drydock lease --type working-copy --attributes repositoryID=12`, got a working copy of Phabricator allocated on disk.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3999
Summary: This does nothing fancy, just closes the resource and releases/breaks leases. They'll get cleaned up in some to-be-written GC process.
Test Plan: Closed resources from web UI and CLI.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3998
Summary:
Builds out most of the non-hover-stuff from `overview-hovercards.png`. Things I didn't build:
- Tokens (I like them a lot but don't want to scope creep)
- Functions (backend mess / future work)
- Icons for tags.
- Tags with pointy ends and holes in them (an earlier mock had this I think but they're gone on final)
- The cyaney color for "Sporadic" since I just noticed it while typing this up.
Test Plan: Looked at UIExample page.
Reviewers: chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T2089
Differential Revision: https://secure.phabricator.com/D4029
Summary:
- Since we'll never serve these directly, move them to resources/. This makes generating the Celerity map faster and reduces the size of the result map, since we don't need to analyze resources we'll never serve.
- Also Rename the 2x `subscribe-remove` to `subscribe-delete` since they were named inconsistently. Everything else is in good shape.
Test Plan: Generated sprites as per D4025
Reviewers: chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T2013
Differential Revision: https://secure.phabricator.com/D4026
Summary:
- Use transactions to apply edits.
- Use Editor to apply transactions.
- Some special casing for tricky stuff I don't want to deal with yet (mock images).
Test Plan: {F22368}
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2097
Differential Revision: https://secure.phabricator.com/D3837
Summary: Basic support for adding comments. Missing a lot of frills. Uses new comment/transaction UI.
Test Plan:
Added some comments. Tried to add an empty comment.
Some comments:
{F22361}
No text provided:
{F22362}
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2097
Differential Revision: https://secure.phabricator.com/D3834
Summary:
This is still rough and not completely accurate to the mocks (and the mobile view is quite crude and mostly just "hey this technically works"), but I want to build Pholio on top of it rather than building it on something else and then swapping it out later and the API is reasonable enough.
This should probably be called `PhabricatorTransactionView` but we already have one of those. I might juggle the names in a future diff.
Test Plan:
Desktop
{F22352}
Mobile
{F22351}
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2097
Differential Revision: https://secure.phabricator.com/D3833
Summary:
Nothing app-specific yet, just stitching groundwork together from readymade components.
{F22347}
Test Plan: Created some mocks via web UI.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T2097
Differential Revision: https://secure.phabricator.com/D3830
Summary:
I'm not going to land this until it's a bit more fleshed out since it would just confuse users, but this is probably more reviewable as a few diffs adding a couple features than one ULTRA-diff adding everything. Implement application basics for Pholio. This does more or less nothing, but adds storage, subscribe, flag, markup, indexing, query basics, PHIDs, handle loads, a couple of realy really basic controllers, etc.
Basic hierarchy is:
- **Moleskine**: Top-level object like a Differential Revision, like "Ponder Feed Ideas".
- **Image**: Each Moleskine has one or more images, like the unexpanded / expanded / mobile / empty states of feed.
- **Transaction**: Comment or edit, like Maniphest. I generally want to move most apps to a transaction model so we can log edits.
- **PixelComment**: Equivalent of an inline comment.
Test Plan: Created a fake object and viewed it.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran, davidreuss
Maniphest Tasks: T2097
Differential Revision: https://secure.phabricator.com/D3817
Summary: gives user a dialogue and they can fill out what comes after /w/
Test Plan: made some new wiki docs. played with garbage data and edit scenarios as well as vanilla create -- good ish
Reviewers: epriestley, chad
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1360
Differential Revision: https://secure.phabricator.com/D3946
Summary: This saves lint errors to the path change of current commit. It requires pushed revision. It doesn't save difference from previous commit mentioned in T2038#comment-4 - I don't plan doing it after all, everything would be much more complicated and the amount of data saved with this approach isn't that bad.
Test Plan: Applied patch, ran script, verified DB.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2038
Differential Revision: https://secure.phabricator.com/D3899
Summary: don't need it now that uploading files is so easy. Plus it made for some buggy jonx if / when there were bad image links coupled with caching. In theory this is a lot less pretty though if folks linked to a bunch of files served elsewhere using images.
Test Plan: http://does-not-exist.com/imaginary.jpg rendered as a link!
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2000
Differential Revision: https://secure.phabricator.com/D3908
Summary:
- Remove EC2, RemoteHost, Application, etc., blueprints for now. They're very proof-of-concept and Blueprints are getting API changes I don't want to bother propagating for now. Leave the abstract base class and the LocalHost blueprint. I'll restore the more complicated ones once better foundations are in place.
- Remove the Allocate controller from the web UI. The original vision here was that you'd manually allocate resources in some cases, but it no longer makes sense to do so as all allocations come from leases now. This simplifies allocations and makes the rule for when we can clean up resources clear-cut (if a resource has no more active leases, it can be cleaned up). Instead, we'll build resources like the localhost and remote hosts lazily, when leases come in for them.
- Add some configuration to manage the localhost blueprint.
- Refactor `canAllocateResources()` into `isEnabled()` (for config checks) and `canAllocateMoreResources()` (for quota checks, e.g. too many resources are allocated already).
- Juggle some signatures to align better with a world where blueprints generally do allocate.
- Add some more logging and error handling.
- Fix an issue with log ordering.
Test Plan: Allocated some localhost leases.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3902
Summary: so folks can write applications and whatnot.
Test Plan: set feed.http-hooks to local dev instance (200) and localhost (500) in my conf. Verified succcess and retrying respectively.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T305
Differential Revision: https://secure.phabricator.com/D3874
Summary:
Tightens up a bunch of stuff:
- In `drydock lease`, pull and print logs so the user can see what's happening.
- Remove `DrydockAllocator`, which was a dumb class that did nothing. Move the tiny amount of logic it held directly to `DrydockLease`.
- Move `resourceType` from worker task metadata directly to `DrydockLease`. Other things (like the web UI) can be more informative with this information available.
- Pass leases to `allocateResource()`. We always allocate in response to a lease activation request, and the lease often has vital information. This also allows us to associate logs with leases correctly.
Test Plan: Ran `drydock lease --type host` and saw it perform a host allocation in EC2.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3870
Summary: Add a bin/drydock symlink and break it into workflows. Nothing too special here.
Test Plan: Ran `bin/drydock wait-for-lease`, `bin/drydock lease`, `bin/drydock help`, etc.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3867
Summary:
all sorts of stuff
- made comment form width flexible
- made margins element specific rather than part of differential-primary-pane
- made box elements all veritically align left and right until code stuff
- re-factored width calculaton stuff a bunch so only the code section has to suffer from max-width calculations; everything else can flex
- made colspan 3 for rightmost table header element. this is so the "View Options" UI element ends up lining up correctly with the "Show All Lines" element just below
Test Plan: looked at revision view and changeset view and it all looked hot. note I did not test what things looked like with different word wrap values; that should still work given the re-factoring and not re-design here. also toggled haunted panel mode and it looked good.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2006
Differential Revision: https://secure.phabricator.com/D3866
Summary:
We lock tasks by setting `leaseOwner` to a unique value, but the value is currently unique-to-the-process rather than unique-to-the-query. This means that if a process leases a task, then leases another task, both tasks will have the same `leaseOwner`. This can cause an issue where we go to select the task we just leased and get the other task instead, if we aren't careful about the select construction.
We can avoid this by being clever and making sure the select is constructed correctly, but making the `leaseOwner` unique to the query is much simpler and more foolproof. This guarantees we always select only the rows we just leased.
Also remove `PhabricatorGoodForNothingWorker` since `PhabricatorTestWorker` fills its role of allowing things to be tested, and simplify the unit tests since we don't need to be clever about avoiding this issue any more.
Test Plan: Ran unit tests.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3862
Summary:
- Clean up a TODO about permanent failures.
- Clean up a TODO about failing tasks after too many retries.
- Clean up a TODO about testing for bad leases.
- Make the lease/retry implementation more flexible and natural.
- Make completely bogus tasks fail permanently.
- Make PhabricatorMetaMTAWorker use new `getWaitBeforeRetry()` (as intended), not hackily implement logic in `getRequiredLeaseTime()`.
- Document worker hooks for failures and retries.
- Provide coverage on everything.
Test Plan: Ran unit tests. Ran `bin/phd debug taskmaster`.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3859
Summary: This simplifies the fairly thorny logic of leasing tasks a bit. I'm planning to introduce another callsite shortly for Drydock.
Test Plan: Ran `bin/phd debug taskmaster`, observed sensible queries and correct operation.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3855
Summary:
Currently, when taskmasters complete a task it is immediately deleted. This prevents us from doing some general things, like:
- Supporting the idea of permanent failure (e.g., after N failures just stop trying).
- Showing the user how fast taskmasters are completing tasks.
- Showing the user how long tasks took to complete.
Having better visibility into this is important to Drydock, which builds on the task system. Also, generally buff debug output for task execution.
Test Plan: Ran `bin/phd debug taskmaster`. Ran `bin/phd debug garbage`. Queued some tasks via various systems.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3852
Summary: Add an Application class for Drydock and move routing rules there.
Test Plan: Looked at /applications/, clicked around drydock.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D3847
Summary: This doesn't do anything useful yet but Pholio needs to access Files and I wanted to get the groundwork in place for eventual policy-awareness.
Test Plan: Will use in Pholio.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D3829
Summary: fancy title. really just make the delete() method aware of related objects and build a quick workflow which calls delete(). also make commit delete savvy about audit requests.
Test Plan: deleted a repository per the instructions given to me in the web UI
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1416, T1958, T1372
Differential Revision: https://secure.phabricator.com/D3822
Summary: Quora requested this (moving to S3) but it's also clearly a good idea.
Test Plan:
Ran with various valid/invalid options to test options. Error/sanity checking seemed OK.
Migrated individual local files.
Migrated all my local files back and forth between engines several times.
Uploaded some new files.
Reviewers: btrahan, vrana
Reviewed By: vrana
CC: aran
Maniphest Tasks: T1950
Differential Revision: https://secure.phabricator.com/D3808
Summary: you can now add, edit, and delete status events. also added a "description" to status events and surface it in the big calendar view on mouse hover. some refactoring changes as well to make validation logic centralized within the storage class.
Test Plan: added, edited, deleted. yay.
Reviewers: epriestley, vrana
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T407
Differential Revision: https://secure.phabricator.com/D3810
Summary:
Minor tweaks to lightboxes.
- With "position: fixed;", we don't need to do any of the scroll/resize stuff. Just remove it.
- Make the lightbox go over the menu bar -- was it intentional that it wasn't?
- Make 'jx-mask' use "position: fixed;" too.
- Add a loading indicator.
- In Differential/Maniphest/etc, a preview may bring in an image but won't bring in the CSS we need. The "real" fix is to ship CSS/JS with ajax, but that's really hard -- fake it by pulling in the right CSS any time we render a remarkup area.
I'm going to do a couple of other tweaks here but need to update JX.Mask.
Test Plan: Verified behavior is reasonable in Safari, Firefox, Chrome with multiple images / scroll / previews / resize.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1896
Differential Revision: https://secure.phabricator.com/D3795
Summary:
images attached to maniphest tasks and mentioned in remarkup anywhere now invoke a lightbox control that lets the user page through all the images.
lightbox includes a download button, next / prev buttons, and if we're not at the tippy toppy of hte page an "X" or close button.
we also respond to left, right, and esc for navigating.
next time we should get non-images working in here...!
Test Plan:
played with maniphest - looks good
made comments with images. looks good.
made sure multiple image comments worked.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin, chad
Maniphest Tasks: T1896
Differential Revision: https://secure.phabricator.com/D3705
Summary:
Allow skins to serve arbitrary resources without needing to be mapped, so we can have a vibrant community of amateur skinners.
For "basic" skins, just put all the "css/" on the page always.
Includes an image to prove that works.
@vrana, pretty sure this has no impact outside of Phame but it does change Celerity so it might be to blame if there's any weirdness with static resources.
Test Plan:
{F21341}
{F21340}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1373
Differential Revision: https://secure.phabricator.com/D3719
Summary:
Lower the barrier to entry for installing and creating skins, so we can kill Wordpress. You can now install skins by dropping them into a directory, and build either "advanced" (full phutil library) skins or "basic" (simple PHP templates) skins.
Next up is getting static resources working in an easy way for skins.
I put these in `externals/` for now so they don't get hit by lint.
Test Plan: Viewed the Pokeblog with the Oblivious skin.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1373
Differential Revision: https://secure.phabricator.com/D3717
Summary: Restore summarization. Use the remarkup cache, and try to do it somewhat-intelligently (pick the first paragraph that looks like it's text).
Test Plan:
{F21323}
{F21324}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1373
Differential Revision: https://secure.phabricator.com/D3715
Summary:
Two high-level things happening here:
- We no longer ever need to put meta-UI (content creation, editing, notices, etc.) on live blog views, since this is all in Phame now. I pulled this out.
- On the other hand, I pushed more routing/control logic into Skins and made the root skin a Controller instead of a View. This simplifies some of the code above skins, and the theory behind this is that it gives us greater flexibility to, e.g., put a glue layer between Phame and Wordpress templates or whatever else, and allows skins to handle routing and thus add pages like "About" or "Bio".
- I added a basic skin below the root skin which is more like the old root skin and has standard rendering hooks.
- "Ten Eleven" is a play on the popular (default?) Wordpress themes called "Twenty Ten", "Twenty Eleven" and "Twenty Twelve".
Test Plan: Viewed live blog and live posts. They aren't pretty, but they don't have extraneous resources.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1373
Differential Revision: https://secure.phabricator.com/D3714
Summary:
For Phame, we really want more than a chromeless page -- it shouldn't have Javelin or Phabricator styles on it.
Pull the bare infrastructure out of StandardPageView and make it available as BarePageView.
Test Plan: Viewed bare page in UIExamples, various non-bare pages.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D3711
